d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
43b595f6a5
freebsd-dev/sys/dev/bhnd/nvram/bhnd_spromvar.h

57 lines
2.1 KiB
C
Raw Normal View History

[bhnd] Initial bhnd(4) SPROM/NVRAM support. This adds support for the NVRAM handling and the basic SPROM hardware used on siba(4) and bcma(4) devices, including: * SPROM directly attached to the PCI core, accessible via PCI configuration space. * SPROM attached to later ChipCommon cores. * SPROM variables vended from the parent SoC bus (e.g. via a directly-attached flash device). Additional improvements to the NVRAM/SPROM interface will be required, but this changeset stands alone as working checkpoint. Submitted by: Landon Fuller <landonf@landonf.org> Reviewed by: Michael Zhilin <mizkha@gmail.com> (Broadcom MIPS support) Differential Revision: https://reviews.freebsd.org/D6196
2016-05-08 19:14:05 +00:00
/*-
* Copyright (c) 2015-2016 Landon Fuller <landon@landonf.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
* redistribution must be conditioned upon including a substantially
* similar Disclaimer requirement for further binary redistribution.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
* AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
* THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
* IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGES.
*
* $FreeBSD$
*/
[bhnd] Implement pass-through resource management for ChipCommon. This patchset adds support to bhnd_chipc for sharing SYS_RES_MEMORY resources with its children, allowing us to hang devices off of bhnd_chipc that rely on access to a subset of the device register space that bhnd_chipc itself must also allocate. We could avoid most of this heavy lifting if RF_SHAREABLE+SYS_RES_MEMORY wasn't limited to use with allocations at the same size/offset. As a work-around, I implemented something similar to vga_pci.c, which implements similar reference counting of of PCI BAR resources for its children. With these changes, chipc will use reference counting of SYS_RES_MEMORY allocation/activation requests, to decide when to allocate/activate/ deactivate/release resources from the parent bhnd(4) bus. The requesting child device is allocated a new resource from chipc's rman, pointing to (possibly a subregion of) the refcounted bhnd resources allocated by chipc. Other resource types are just passed directly to the parent bhnd bus; RF_SHAREABLE works just fine with IRQs. I also lifted the SPROM device code out into a common driver, since this now allows me to hang simple subclasses off of a common driver off of both bhndb_pci and bhnd_chipc. Tested: * (landonf) Tested against BCM4331 and BCM4312, confirmed that SPROM still attaches and can be queried. Submitted by: Landon Fuller <landonf@landonf.org> Reviewed by: mizkha@gmail.com Differential Revision: https://reviews.freebsd.org/D6471
2016-05-24 01:12:19 +00:00
#ifndef _BHND_NVRAM_BHND_SPROMVAR_H_
#define _BHND_NVRAM_BHND_SPROMVAR_H_
[bhnd] Initial bhnd(4) SPROM/NVRAM support. This adds support for the NVRAM handling and the basic SPROM hardware used on siba(4) and bcma(4) devices, including: * SPROM directly attached to the PCI core, accessible via PCI configuration space. * SPROM attached to later ChipCommon cores. * SPROM variables vended from the parent SoC bus (e.g. via a directly-attached flash device). Additional improvements to the NVRAM/SPROM interface will be required, but this changeset stands alone as working checkpoint. Submitted by: Landon Fuller <landonf@landonf.org> Reviewed by: Michael Zhilin <mizkha@gmail.com> (Broadcom MIPS support) Differential Revision: https://reviews.freebsd.org/D6196
2016-05-08 19:14:05 +00:00
[bhnd] Implement pass-through resource management for ChipCommon. This patchset adds support to bhnd_chipc for sharing SYS_RES_MEMORY resources with its children, allowing us to hang devices off of bhnd_chipc that rely on access to a subset of the device register space that bhnd_chipc itself must also allocate. We could avoid most of this heavy lifting if RF_SHAREABLE+SYS_RES_MEMORY wasn't limited to use with allocations at the same size/offset. As a work-around, I implemented something similar to vga_pci.c, which implements similar reference counting of of PCI BAR resources for its children. With these changes, chipc will use reference counting of SYS_RES_MEMORY allocation/activation requests, to decide when to allocate/activate/ deactivate/release resources from the parent bhnd(4) bus. The requesting child device is allocated a new resource from chipc's rman, pointing to (possibly a subregion of) the refcounted bhnd resources allocated by chipc. Other resource types are just passed directly to the parent bhnd bus; RF_SHAREABLE works just fine with IRQs. I also lifted the SPROM device code out into a common driver, since this now allows me to hang simple subclasses off of a common driver off of both bhndb_pci and bhnd_chipc. Tested: * (landonf) Tested against BCM4331 and BCM4312, confirmed that SPROM still attaches and can be queried. Submitted by: Landon Fuller <landonf@landonf.org> Reviewed by: mizkha@gmail.com Differential Revision: https://reviews.freebsd.org/D6471
2016-05-24 01:12:19 +00:00
#include <dev/bhnd/bhnd.h>
bhnd(4): Unify NVRAM/SPROM parsing, implement compact SPROM layout encoding. - Defined an abstract NVRAM I/O API (bhnd_nvram_io), decoupling NVRAM/SPROM parsing from the actual underlying NVRAM data provider (e.g. CFE firmware devices). - Defined an abstract NVRAM data API (bhnd_nvram_data), decoupling higher-level NVRAM operations (indexed lookup, data conversion, etc) from the underlying NVRAM file format parsing/serialization. - Implemented a new high-level bhnd_nvram_store API, providing indexed variable lookup, pending write tracking, etc on top of an arbitrary bhnd_nvram_data instance. - Migrated all bhnd(4) NVRAM device drivers to the common bhnd_nvram_store API. - Implemented a common bhnd_nvram_val API for parsing/encoding NVRAM variable values, including applying format-specific behavior when converting to/from the NVRAM string representations. - Dropped the now unnecessary bhnd_nvram driver, and moved the broadcom/mips-specific CFE NVRAM driver out into sys/mips/broadcom. - Implemented a new nvram_map file format: - Variable definitions are now defined separately from the SPROM layout. This will also allow us to define CIS tuple NVRAM mappings referencing the common NVRAM variable definitions. - Variables can now be defined within arbitrary named groups. - Textual descriptions and help information can be defined inline for both variables and variable groups. - Implemented a new, compact encoding of SPROM image layout offsets. - Source-level (but not build system) support for building the NVRAM file format APIs (bhnd_nvram_io, bhnd_nvram_data, bhnd_nvram_store) as a userspace library. The new compact SPROM image layout encoding is loosely modeled on Apple dyld compressed LINKEDIT symbol binding opcodes; it provides a compact state-machine encoding of the mapping between NVRAM variables and the SPROM image offset, mask, and shift instructions necessary to decode or encode the SPROM variable data. The compact encoding reduces the size of the generated SPROM layout data from roughly 60KB to 3KB. The sequential nature SPROM layout opcode tables also simplify iteration of the SPROM variables, as it's no longer neccessary to iterate the full NVRAM variable definition table, but instead simply scan the SPROM revision's layout opcode table. Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D8645
2016-11-26 23:22:32 +00:00
#include "bhnd_nvram_store.h"
bhnd(4): Implement NVRAM support required for PMU bring-up. - Added a generic bhnd_nvram_parser API, with support for the TLV format used on WGT634U devices, the standard BCM NVRAM format used on most modern devices, and the "board text file" format used on some hardware to supply external NVRAM data at runtime (e.g. via an EFI variable). - Extended the bhnd_bus_if and bhnd_nvram_if interfaces to support both string-based and primitive data type variable access, required for common behavior across both SPROM and NVRAM data sources. - Extended the existing SPROM implementation to support the new string-based NVRAM APIs. - Added an abstract bhnd_nvram driver, implementing the bhnd_nvram_if atop the bhnd_nvram_parser API. - Added a CFE-based bhnd_nvram driver to provide read-only access to NVRAM data on MIPS SoCs, pending implementation of a flash-aware bhnd_nvram driver. Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D7489
2016-08-16 21:32:05 +00:00
[bhnd] Implement pass-through resource management for ChipCommon. This patchset adds support to bhnd_chipc for sharing SYS_RES_MEMORY resources with its children, allowing us to hang devices off of bhnd_chipc that rely on access to a subset of the device register space that bhnd_chipc itself must also allocate. We could avoid most of this heavy lifting if RF_SHAREABLE+SYS_RES_MEMORY wasn't limited to use with allocations at the same size/offset. As a work-around, I implemented something similar to vga_pci.c, which implements similar reference counting of of PCI BAR resources for its children. With these changes, chipc will use reference counting of SYS_RES_MEMORY allocation/activation requests, to decide when to allocate/activate/ deactivate/release resources from the parent bhnd(4) bus. The requesting child device is allocated a new resource from chipc's rman, pointing to (possibly a subregion of) the refcounted bhnd resources allocated by chipc. Other resource types are just passed directly to the parent bhnd bus; RF_SHAREABLE works just fine with IRQs. I also lifted the SPROM device code out into a common driver, since this now allows me to hang simple subclasses off of a common driver off of both bhndb_pci and bhnd_chipc. Tested: * (landonf) Tested against BCM4331 and BCM4312, confirmed that SPROM still attaches and can be queried. Submitted by: Landon Fuller <landonf@landonf.org> Reviewed by: mizkha@gmail.com Differential Revision: https://reviews.freebsd.org/D6471
2016-05-24 01:12:19 +00:00
DECLARE_CLASS(bhnd_sprom_driver);
int bhnd_sprom_probe(device_t dev);
bhnd(4): support IPX OTP NVRAM/SPROM data source Add support for fetching SPROM data from OTP on chipsets with an IPX OTP controller (including the BCM43225). This integrates the NVRAM data source into the chipc_caps capability structure, and adds a sprom_offset field that can be used with OTP to locate the SPROM image data (found within the general use region, H/W subregion). This also removes one of two duplicate parse error messages reported by both the bhnd_sprom driver and the underlying SPROM parsing API. Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D6729
2016-06-04 19:58:01 +00:00
int bhnd_sprom_attach(device_t dev, bus_size_t offset);
[bhnd] Implement pass-through resource management for ChipCommon. This patchset adds support to bhnd_chipc for sharing SYS_RES_MEMORY resources with its children, allowing us to hang devices off of bhnd_chipc that rely on access to a subset of the device register space that bhnd_chipc itself must also allocate. We could avoid most of this heavy lifting if RF_SHAREABLE+SYS_RES_MEMORY wasn't limited to use with allocations at the same size/offset. As a work-around, I implemented something similar to vga_pci.c, which implements similar reference counting of of PCI BAR resources for its children. With these changes, chipc will use reference counting of SYS_RES_MEMORY allocation/activation requests, to decide when to allocate/activate/ deactivate/release resources from the parent bhnd(4) bus. The requesting child device is allocated a new resource from chipc's rman, pointing to (possibly a subregion of) the refcounted bhnd resources allocated by chipc. Other resource types are just passed directly to the parent bhnd bus; RF_SHAREABLE works just fine with IRQs. I also lifted the SPROM device code out into a common driver, since this now allows me to hang simple subclasses off of a common driver off of both bhndb_pci and bhnd_chipc. Tested: * (landonf) Tested against BCM4331 and BCM4312, confirmed that SPROM still attaches and can be queried. Submitted by: Landon Fuller <landonf@landonf.org> Reviewed by: mizkha@gmail.com Differential Revision: https://reviews.freebsd.org/D6471
2016-05-24 01:12:19 +00:00
int bhnd_sprom_resume(device_t dev);
int bhnd_sprom_suspend(device_t dev);
int bhnd_sprom_detach(device_t dev);
/**
* bhnd_sprom driver instance state. Must be first member of all subclass
* softc structures.
*/
struct bhnd_sprom_softc {
bhnd(4): Unify NVRAM/SPROM parsing, implement compact SPROM layout encoding. - Defined an abstract NVRAM I/O API (bhnd_nvram_io), decoupling NVRAM/SPROM parsing from the actual underlying NVRAM data provider (e.g. CFE firmware devices). - Defined an abstract NVRAM data API (bhnd_nvram_data), decoupling higher-level NVRAM operations (indexed lookup, data conversion, etc) from the underlying NVRAM file format parsing/serialization. - Implemented a new high-level bhnd_nvram_store API, providing indexed variable lookup, pending write tracking, etc on top of an arbitrary bhnd_nvram_data instance. - Migrated all bhnd(4) NVRAM device drivers to the common bhnd_nvram_store API. - Implemented a common bhnd_nvram_val API for parsing/encoding NVRAM variable values, including applying format-specific behavior when converting to/from the NVRAM string representations. - Dropped the now unnecessary bhnd_nvram driver, and moved the broadcom/mips-specific CFE NVRAM driver out into sys/mips/broadcom. - Implemented a new nvram_map file format: - Variable definitions are now defined separately from the SPROM layout. This will also allow us to define CIS tuple NVRAM mappings referencing the common NVRAM variable definitions. - Variables can now be defined within arbitrary named groups. - Textual descriptions and help information can be defined inline for both variables and variable groups. - Implemented a new, compact encoding of SPROM image layout offsets. - Source-level (but not build system) support for building the NVRAM file format APIs (bhnd_nvram_io, bhnd_nvram_data, bhnd_nvram_store) as a userspace library. The new compact SPROM image layout encoding is loosely modeled on Apple dyld compressed LINKEDIT symbol binding opcodes; it provides a compact state-machine encoding of the mapping between NVRAM variables and the SPROM image offset, mask, and shift instructions necessary to decode or encode the SPROM variable data. The compact encoding reduces the size of the generated SPROM layout data from roughly 60KB to 3KB. The sequential nature SPROM layout opcode tables also simplify iteration of the SPROM variables, as it's no longer neccessary to iterate the full NVRAM variable definition table, but instead simply scan the SPROM revision's layout opcode table. Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D8645
2016-11-26 23:22:32 +00:00
device_t dev;
struct bhnd_nvram_store *store; /**< nvram store */
[bhnd] Implement pass-through resource management for ChipCommon. This patchset adds support to bhnd_chipc for sharing SYS_RES_MEMORY resources with its children, allowing us to hang devices off of bhnd_chipc that rely on access to a subset of the device register space that bhnd_chipc itself must also allocate. We could avoid most of this heavy lifting if RF_SHAREABLE+SYS_RES_MEMORY wasn't limited to use with allocations at the same size/offset. As a work-around, I implemented something similar to vga_pci.c, which implements similar reference counting of of PCI BAR resources for its children. With these changes, chipc will use reference counting of SYS_RES_MEMORY allocation/activation requests, to decide when to allocate/activate/ deactivate/release resources from the parent bhnd(4) bus. The requesting child device is allocated a new resource from chipc's rman, pointing to (possibly a subregion of) the refcounted bhnd resources allocated by chipc. Other resource types are just passed directly to the parent bhnd bus; RF_SHAREABLE works just fine with IRQs. I also lifted the SPROM device code out into a common driver, since this now allows me to hang simple subclasses off of a common driver off of both bhndb_pci and bhnd_chipc. Tested: * (landonf) Tested against BCM4331 and BCM4312, confirmed that SPROM still attaches and can be queried. Submitted by: Landon Fuller <landonf@landonf.org> Reviewed by: mizkha@gmail.com Differential Revision: https://reviews.freebsd.org/D6471
2016-05-24 01:12:19 +00:00
};
[bhnd] Initial bhnd(4) SPROM/NVRAM support. This adds support for the NVRAM handling and the basic SPROM hardware used on siba(4) and bcma(4) devices, including: * SPROM directly attached to the PCI core, accessible via PCI configuration space. * SPROM attached to later ChipCommon cores. * SPROM variables vended from the parent SoC bus (e.g. via a directly-attached flash device). Additional improvements to the NVRAM/SPROM interface will be required, but this changeset stands alone as working checkpoint. Submitted by: Landon Fuller <landonf@landonf.org> Reviewed by: Michael Zhilin <mizkha@gmail.com> (Broadcom MIPS support) Differential Revision: https://reviews.freebsd.org/D6196
2016-05-08 19:14:05 +00:00
[bhnd] Implement pass-through resource management for ChipCommon. This patchset adds support to bhnd_chipc for sharing SYS_RES_MEMORY resources with its children, allowing us to hang devices off of bhnd_chipc that rely on access to a subset of the device register space that bhnd_chipc itself must also allocate. We could avoid most of this heavy lifting if RF_SHAREABLE+SYS_RES_MEMORY wasn't limited to use with allocations at the same size/offset. As a work-around, I implemented something similar to vga_pci.c, which implements similar reference counting of of PCI BAR resources for its children. With these changes, chipc will use reference counting of SYS_RES_MEMORY allocation/activation requests, to decide when to allocate/activate/ deactivate/release resources from the parent bhnd(4) bus. The requesting child device is allocated a new resource from chipc's rman, pointing to (possibly a subregion of) the refcounted bhnd resources allocated by chipc. Other resource types are just passed directly to the parent bhnd bus; RF_SHAREABLE works just fine with IRQs. I also lifted the SPROM device code out into a common driver, since this now allows me to hang simple subclasses off of a common driver off of both bhndb_pci and bhnd_chipc. Tested: * (landonf) Tested against BCM4331 and BCM4312, confirmed that SPROM still attaches and can be queried. Submitted by: Landon Fuller <landonf@landonf.org> Reviewed by: mizkha@gmail.com Differential Revision: https://reviews.freebsd.org/D6471
2016-05-24 01:12:19 +00:00
#endif /* _BHND_NVRAM_BHND_SPROMVAR_H_ */
Reference in New Issue Copy Permalink