freebsd-dev/sys/dev/wpi/if_wpivar.h

295 lines
7.6 KiB
C
Raw Normal View History

/* $FreeBSD$ */
/*-
* Copyright (c) 2006,2007
* Damien Bergamini <damien.bergamini@free.fr>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
struct wpi_rx_radiotap_header {
struct ieee80211_radiotap_header wr_ihdr;
uint64_t wr_tsft;
uint8_t wr_flags;
uint8_t wr_rate;
uint16_t wr_chan_freq;
uint16_t wr_chan_flags;
int8_t wr_dbm_antsignal;
int8_t wr_dbm_antnoise;
uint8_t wr_antenna;
} __packed;
#define WPI_RX_RADIOTAP_PRESENT \
((1 << IEEE80211_RADIOTAP_TSFT) | \
(1 << IEEE80211_RADIOTAP_FLAGS) | \
(1 << IEEE80211_RADIOTAP_RATE) | \
(1 << IEEE80211_RADIOTAP_CHANNEL) | \
(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) | \
(1 << IEEE80211_RADIOTAP_DBM_ANTNOISE) | \
(1 << IEEE80211_RADIOTAP_ANTENNA))
struct wpi_tx_radiotap_header {
struct ieee80211_radiotap_header wt_ihdr;
uint8_t wt_flags;
uint8_t wt_rate;
uint16_t wt_chan_freq;
uint16_t wt_chan_flags;
} __packed;
#define WPI_TX_RADIOTAP_PRESENT \
((1 << IEEE80211_RADIOTAP_FLAGS) | \
(1 << IEEE80211_RADIOTAP_RATE) | \
(1 << IEEE80211_RADIOTAP_CHANNEL))
struct wpi_dma_info {
bus_dma_tag_t tag;
bus_dmamap_t map;
bus_addr_t paddr;
caddr_t vaddr;
bus_size_t size;
};
struct wpi_tx_data {
bus_dmamap_t map;
bus_addr_t cmd_paddr;
struct mbuf *m;
struct ieee80211_node *ni;
int hdrlen;
};
struct wpi_tx_ring {
struct wpi_dma_info desc_dma;
struct wpi_dma_info cmd_dma;
struct wpi_tx_desc *desc;
struct wpi_tx_cmd *cmd;
struct wpi_tx_data data[WPI_TX_RING_COUNT];
bus_dma_tag_t data_dmat;
uint8_t qid;
uint8_t cur;
uint8_t pending;
int16_t queued;
int update:1;
};
struct wpi_rx_data {
struct mbuf *m;
bus_dmamap_t map;
};
struct wpi_rx_ring {
struct wpi_dma_info desc_dma;
uint32_t *desc;
struct wpi_rx_data data[WPI_RX_RING_COUNT];
bus_dma_tag_t data_dmat;
uint16_t cur;
int update;
};
struct wpi_node {
struct ieee80211_node ni; /* must be the first */
uint8_t id;
};
#define WPI_NODE(ni) ((struct wpi_node *)(ni))
struct wpi_power_sample {
uint8_t index;
int8_t power;
};
struct wpi_power_group {
#define WPI_SAMPLES_COUNT 5
struct wpi_power_sample samples[WPI_SAMPLES_COUNT];
uint8_t chan;
int8_t maxpwr;
int16_t temp;
};
struct wpi_buf {
uint8_t data[56]; /* sizeof(struct wpi_cmd_beacon) */
struct ieee80211_node *ni;
struct mbuf *m;
size_t size;
uint8_t code;
uint16_t ac;
};
struct wpi_vap {
struct ieee80211vap wv_vap;
struct wpi_buf wv_bcbuf;
struct mtx wv_mtx;
uint8_t wv_gtk;
#define WPI_VAP_KEY(kid) (1 << kid)
int (*wv_newstate)(struct ieee80211vap *,
enum ieee80211_state, int);
void (*wv_recv_mgmt)(struct ieee80211_node *,
struct mbuf *, int,
const struct ieee80211_rx_stats *,
int, int);
};
#define WPI_VAP(vap) ((struct wpi_vap *)(vap))
#define WPI_VAP_LOCK_INIT(_wvp) \
mtx_init(&(_wvp)->wv_mtx, "lock for wv_bcbuf/wv_boff structures", \
NULL, MTX_DEF)
#define WPI_VAP_LOCK(_wvp) mtx_lock(&(_wvp)->wv_mtx)
#define WPI_VAP_UNLOCK(_wvp) mtx_unlock(&(_wvp)->wv_mtx)
#define WPI_VAP_LOCK_ASSERT(_wvp) mtx_assert(&(_wvp)->wv_mtx, MA_OWNED)
#define WPI_VAP_LOCK_DESTROY(_wvp) mtx_destroy(&(_wvp)->wv_mtx)
struct wpi_fw_part {
const uint8_t *text;
uint32_t textsz;
const uint8_t *data;
uint32_t datasz;
};
struct wpi_fw_info {
const uint8_t *data;
size_t size;
struct wpi_fw_part init;
struct wpi_fw_part main;
struct wpi_fw_part boot;
};
struct wpi_softc {
device_t sc_dev;
int sc_debug;
Replay r286410. Change KPI of how device drivers that provide wireless connectivity interact with the net80211 stack. Historical background: originally wireless devices created an interface, just like Ethernet devices do. Name of an interface matched the name of the driver that created. Later, wlan(4) layer was introduced, and the wlanX interfaces become the actual interface, leaving original ones as "a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer and a driver became a mix of methods that pass a pointer to struct ifnet as identifier and methods that pass pointer to struct ieee80211com. From user point of view, the parent interface just hangs on in the ifconfig list, and user can't do anything useful with it. Now, the struct ifnet goes away. The struct ieee80211com is the only KPI between a device driver and net80211. Details: - The struct ieee80211com is embedded into drivers softc. - Packets are sent via new ic_transmit method, which is very much like the previous if_transmit. - Bringing parent up/down is done via new ic_parent method, which notifies driver about any changes: number of wlan(4) interfaces, number of them in promisc or allmulti state. - Device specific ioctls (if any) are received on new ic_ioctl method. - Packets/errors accounting are done by the stack. In certain cases, when driver experiences errors and can not attribute them to any specific interface, driver updates ic_oerrors or ic_ierrors counters. Details on interface configuration with new world order: - A sequence of commands needed to bring up wireless DOESN"T change. - /etc/rc.conf parameters DON'T change. - List of devices that can be used to create wlan(4) interfaces is now provided by net.wlan.devices sysctl. Most drivers in this change were converted by me, except of wpi(4), that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann, Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in testing. Reviewed by: adrian Sponsored by: Netflix Sponsored by: Nginx, Inc.
2015-08-27 08:56:39 +00:00
int sc_running;
struct mtx sc_mtx;
Replay r286410. Change KPI of how device drivers that provide wireless connectivity interact with the net80211 stack. Historical background: originally wireless devices created an interface, just like Ethernet devices do. Name of an interface matched the name of the driver that created. Later, wlan(4) layer was introduced, and the wlanX interfaces become the actual interface, leaving original ones as "a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer and a driver became a mix of methods that pass a pointer to struct ifnet as identifier and methods that pass pointer to struct ieee80211com. From user point of view, the parent interface just hangs on in the ifconfig list, and user can't do anything useful with it. Now, the struct ifnet goes away. The struct ieee80211com is the only KPI between a device driver and net80211. Details: - The struct ieee80211com is embedded into drivers softc. - Packets are sent via new ic_transmit method, which is very much like the previous if_transmit. - Bringing parent up/down is done via new ic_parent method, which notifies driver about any changes: number of wlan(4) interfaces, number of them in promisc or allmulti state. - Device specific ioctls (if any) are received on new ic_ioctl method. - Packets/errors accounting are done by the stack. In certain cases, when driver experiences errors and can not attribute them to any specific interface, driver updates ic_oerrors or ic_ierrors counters. Details on interface configuration with new world order: - A sequence of commands needed to bring up wireless DOESN"T change. - /etc/rc.conf parameters DON'T change. - List of devices that can be used to create wlan(4) interfaces is now provided by net.wlan.devices sysctl. Most drivers in this change were converted by me, except of wpi(4), that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann, Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in testing. Reviewed by: adrian Sponsored by: Netflix Sponsored by: Nginx, Inc.
2015-08-27 08:56:39 +00:00
struct ieee80211com sc_ic;
struct ieee80211_ratectl_tx_status sc_txs;
Replay r286410. Change KPI of how device drivers that provide wireless connectivity interact with the net80211 stack. Historical background: originally wireless devices created an interface, just like Ethernet devices do. Name of an interface matched the name of the driver that created. Later, wlan(4) layer was introduced, and the wlanX interfaces become the actual interface, leaving original ones as "a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer and a driver became a mix of methods that pass a pointer to struct ifnet as identifier and methods that pass pointer to struct ieee80211com. From user point of view, the parent interface just hangs on in the ifconfig list, and user can't do anything useful with it. Now, the struct ifnet goes away. The struct ieee80211com is the only KPI between a device driver and net80211. Details: - The struct ieee80211com is embedded into drivers softc. - Packets are sent via new ic_transmit method, which is very much like the previous if_transmit. - Bringing parent up/down is done via new ic_parent method, which notifies driver about any changes: number of wlan(4) interfaces, number of them in promisc or allmulti state. - Device specific ioctls (if any) are received on new ic_ioctl method. - Packets/errors accounting are done by the stack. In certain cases, when driver experiences errors and can not attribute them to any specific interface, driver updates ic_oerrors or ic_ierrors counters. Details on interface configuration with new world order: - A sequence of commands needed to bring up wireless DOESN"T change. - /etc/rc.conf parameters DON'T change. - List of devices that can be used to create wlan(4) interfaces is now provided by net.wlan.devices sysctl. Most drivers in this change were converted by me, except of wpi(4), that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann, Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in testing. Reviewed by: adrian Sponsored by: Netflix Sponsored by: Nginx, Inc.
2015-08-27 08:56:39 +00:00
struct mtx tx_mtx;
/* Shared area. */
struct wpi_dma_info shared_dma;
struct wpi_shared *shared;
struct wpi_tx_ring txq[WPI_DRV_NTXQUEUES];
struct mtx txq_mtx;
struct mtx txq_state_mtx;
struct wpi_rx_ring rxq;
uint64_t rx_tstamp;
/* TX Thermal Callibration. */
struct callout calib_to;
struct callout scan_timeout;
struct callout tx_timeout;
/* Watch dog timer. */
struct callout watchdog_rfkill;
/* Firmware image. */
struct wpi_fw_info fw;
uint32_t errptr;
struct resource *irq;
struct resource *mem;
bus_space_tag_t sc_st;
bus_space_handle_t sc_sh;
void *sc_ih;
bus_size_t sc_sz;
int sc_cap_off; /* PCIe Capabilities. */
struct wpi_rxon rxon;
struct mtx rxon_mtx;
int temp;
uint32_t nodesmsk;
struct mtx nt_mtx;
void (*sc_node_free)(struct ieee80211_node *);
void (*sc_update_rx_ring)(struct wpi_softc *);
void (*sc_update_tx_ring)(struct wpi_softc *,
struct wpi_tx_ring *);
struct wpi_rx_radiotap_header sc_rxtap;
struct wpi_tx_radiotap_header sc_txtap;
/* Firmware image. */
const struct firmware *fw_fp;
/* Firmware DMA transfer. */
struct wpi_dma_info fw_dma;
/* Tasks used by the driver. */
struct task sc_radiooff_task;
struct task sc_radioon_task;
/* Eeprom info. */
uint8_t cap;
uint16_t rev;
uint8_t type;
struct wpi_eeprom_chan
eeprom_channels[WPI_CHAN_BANDS_COUNT][WPI_MAX_CHAN_PER_BAND];
struct wpi_power_group groups[WPI_POWER_GROUPS_COUNT];
int8_t maxpwr[IEEE80211_CHAN_MAX];
char domain[4]; /* Regulatory domain. */
};
/*
* Locking order:
* 1. WPI_LOCK;
* 2. WPI_RXON_LOCK;
* 3. WPI_TX_LOCK;
* 4. WPI_NT_LOCK / WPI_VAP_LOCK;
* 5. WPI_TXQ_LOCK;
* 6. WPI_TXQ_STATE_LOCK;
*/
#define WPI_LOCK_INIT(_sc) \
mtx_init(&(_sc)->sc_mtx, device_get_nameunit((_sc)->sc_dev), \
MTX_NETWORK_LOCK, MTX_DEF)
#define WPI_LOCK(_sc) mtx_lock(&(_sc)->sc_mtx)
#define WPI_UNLOCK(_sc) mtx_unlock(&(_sc)->sc_mtx)
#define WPI_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->sc_mtx, MA_OWNED)
#define WPI_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->sc_mtx)
#define WPI_RXON_LOCK_INIT(_sc) \
mtx_init(&(_sc)->rxon_mtx, "lock for wpi_rxon structure", NULL, MTX_DEF)
#define WPI_RXON_LOCK(_sc) mtx_lock(&(_sc)->rxon_mtx)
#define WPI_RXON_UNLOCK(_sc) mtx_unlock(&(_sc)->rxon_mtx)
#define WPI_RXON_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->rxon_mtx, MA_OWNED)
#define WPI_RXON_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->rxon_mtx)
#define WPI_TX_LOCK_INIT(_sc) \
mtx_init(&(_sc)->tx_mtx, "tx path lock", NULL, MTX_DEF)
#define WPI_TX_LOCK(_sc) mtx_lock(&(_sc)->tx_mtx)
#define WPI_TX_UNLOCK(_sc) mtx_unlock(&(_sc)->tx_mtx)
#define WPI_TX_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->tx_mtx)
#define WPI_NT_LOCK_INIT(_sc) \
mtx_init(&(_sc)->nt_mtx, "node table lock", NULL, MTX_DEF)
#define WPI_NT_LOCK(_sc) mtx_lock(&(_sc)->nt_mtx)
#define WPI_NT_UNLOCK(_sc) mtx_unlock(&(_sc)->nt_mtx)
#define WPI_NT_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->nt_mtx)
#define WPI_TXQ_LOCK_INIT(_sc) \
mtx_init(&(_sc)->txq_mtx, "txq/cmdq lock", NULL, MTX_DEF)
#define WPI_TXQ_LOCK(_sc) mtx_lock(&(_sc)->txq_mtx)
#define WPI_TXQ_UNLOCK(_sc) mtx_unlock(&(_sc)->txq_mtx)
#define WPI_TXQ_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->txq_mtx)
#define WPI_TXQ_STATE_LOCK_INIT(_sc) \
mtx_init(&(_sc)->txq_state_mtx, "txq state lock", NULL, MTX_DEF)
#define WPI_TXQ_STATE_LOCK(_sc) mtx_lock(&(_sc)->txq_state_mtx)
#define WPI_TXQ_STATE_UNLOCK(_sc) mtx_unlock(&(_sc)->txq_state_mtx)
#define WPI_TXQ_STATE_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->txq_state_mtx)