freebsd-dev/etc/ppp/ppp.conf.sample

#################################################################
#
#  	PPP  Sample Configuration File
#
#	  Written by Toshiharu OHNO
#
# $FreeBSD$
#
#################################################################
#
# Default setup. Executed always when PPP is invoked.
#
default:
 set device /dev/cuaa1
 set speed 38400
 disable lqr
 deny lqr
 set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" ATE1Q0 OK-AT-OK \\dATDT\\T TIMEOUT 40 CONNECT"
#
# Example with login script
#   o From PPP prompt,
#	ppp> dial simplesite
#     will automatically dials and perform login procedure.
#
#       ppp> load simplesite
#     will also load and execute commands, but don't dial.
#
#   o From shell, invoke as
#       % ppp simplesite
#     will load commands associated with the label. Use,
#       ppp> dial
#     to establish the connection.
#
simplesite:
 set phone 12345678
 set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp ocol: ppp"
 set timeout 120
#
# Multi-phone example
#
multiphone:
 set phone 12345678:12345679:12345670:12345671
 set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp ocol: ppp"
#
# If peer requires to use CHAP, don't forget to supply authname and authkey.
#
# If you'd like to use CHAP to authentication peer, comment out the line
# ``enable chap'' below. You also need to prepare /etc/ppp.secret.
#
# If remote system sends its system name within CHAP packet and it is
# found in /etc/ppp.secret, then secret key is taken from the file and
# value of authkey is ignored.
#
chapsite:
 set phone 12345678
 set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp"
 deny pap
 accept chap
# enable chap
 set authname MySystemName
 set authkey  OurSecretKey
#
# To speak PAP is just similar to CHAP
#
papsite:
 set phone 12345678
 set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp"
 deny chap
 accept pap
# enable pap
 set authname MyUserName
 set authkey  MyPassword
#
# On demand dialup example
#  Here, we assume that local side use 192.244.185.226 and
#  remote side use 192.244.176.44 as their IP address.
#  You must supply -auto option to invoke PPP.
#
#  ex. % ppp -auto ondemand
#
ondemand:
 set phone 1234567
 set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp"
 set timeout 120
 set ifaddr 192.244.185.226 192.244.176.44 255.255.255.0
 add 0 0 192.244.176.44
#
# Another on demand example
#  If peer assign some IP address for us, and we can't predict it
#  until we make a connection, use 0 as local side address.
#
pmdemend:
 set phone 1234567
 set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp"
 set timeout 120
 set ifaddr 0 192.244.176.44 255.255.255.0
 add 0 0 192.244.176.44
#
# Example to validate incoming user with CHAP
#  Invod as ``ppp -direct users'' from login script. User's system name
#  and secret-key must be registered into /etc/ppp.secret.
#  IP address assigned to peer is registered in ppp.secret, then that
#  value is used and value in ``ifaddr'' command has no effect.
#
users:
 disable pap
 enable chap
 enable  proxy
 set authname ppp-server
 set ifaddr 192.244.176.44 292.244.184.31
#
# Example of Callback Request
#
#  Here, we assume that peer will hangup the line and initiates a callback
#  after successful authentication. We simply use chat script capability
#  and wait for a "NO CARRIER" response from our modem.
#
#  % ppp callback
#
callback:
 set phone 0312345678
 set login "ABORT NO\\sCARRIER TIMEOUT 5 login:-\\r-login: MyName word: MySecret TIMEOUT 20 DUMMY"
 set debug phase chat
 dial
 quit
#
# Example for PPP/TELNET and PPP/TCP. Read doc for further details
#
ppptelnet:
 set escape 0xff
ppptcp:
 set device 192.244.191.33:2400
Reviewed by: 1995-01-31 06:24:33 +00:00			`#################################################################`
			`#`
			`# PPP Sample Configuration File`
			`#`
			`# Written by Toshiharu OHNO`
			`#`
Make the long-awaited change from $Id$ to $FreeBSD$ This will make a number of things easier in the future, as well as (finally!) avoiding the Id-smashing problem which has plagued developers for so long. Boy, I'm glad we're not using sup anymore. This update would have been insane otherwise. 1997-01-14 07:20:47 +00:00			`# $FreeBSD$`
Reviewed by: 1995-01-31 06:24:33 +00:00			`#`
			`#################################################################`
			`#`
			`# Default setup. Executed always when PPP is invoked.`
			`#`
			`default:`
Fix several places where interface netmask was in place of route netmask Fix dialout device name Add multi-phone example 1996-03-08 09:39:45 +00:00			`set device /dev/cuaa1`
Reviewed by: 1995-01-31 06:24:33 +00:00			`set speed 38400`
			`disable lqr`
			`deny lqr`
Fixing misspelling and chang default device as dailout Reviewed by: Atsushi Murai <amruai@spec.co.jp> 1995-04-22 17:14:21 +00:00			`set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" ATE1Q0 OK-AT-OK \\dATDT\\T TIMEOUT 40 CONNECT"`
Reviewed by: 1995-01-31 06:24:33 +00:00			`#`
			`# Example with login script`
			`# o From PPP prompt,`
			`# ppp> dial simplesite`
			`# will automatically dials and perform login procedure.`
			`#`
			`# ppp> load simplesite`
			`# will also load and execute commands, but don't dial.`
			`#`
			`# o From shell, invoke as`
			`# % ppp simplesite`
			`# will load commands associated with the label. Use,`
			`# ppp> dial`
			`# to establish the connection.`
			`#`
			`simplesite:`
			`set phone 12345678`
Added ocol: ppp to the first two examples so that ppp catually requests the ppp protocol when it logs in. I'm not sure whether this applies to all the examples. Are there cases where the ISP assumes ppp is being used ? 1996-11-11 17:27:25 +00:00			`set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp ocol: ppp"`
Reviewed by: 1995-01-31 06:24:33 +00:00			`set timeout 120`
			`#`
Fix several places where interface netmask was in place of route netmask Fix dialout device name Add multi-phone example 1996-03-08 09:39:45 +00:00			`# Multi-phone example`
			`#`
			`multiphone:`
			`set phone 12345678:12345679:12345670:12345671`
Added ocol: ppp to the first two examples so that ppp catually requests the ppp protocol when it logs in. I'm not sure whether this applies to all the examples. Are there cases where the ISP assumes ppp is being used ? 1996-11-11 17:27:25 +00:00			`set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp ocol: ppp"`
Fix several places where interface netmask was in place of route netmask Fix dialout device name Add multi-phone example 1996-03-08 09:39:45 +00:00			`#`
Another round of spelling fixes. 1996-01-31 15:03:18 +00:00			`# If peer requires to use CHAP, don't forget to supply authname and authkey.`
Reviewed by: 1995-01-31 06:24:33 +00:00			`#`
Another round of spelling fixes. 1996-01-31 15:03:18 +00:00			`# If you'd like to use CHAP to authentication peer, comment out the line`
Reviewed by: 1995-01-31 06:24:33 +00:00			# ``enable chap'' below. You also need to prepare /etc/ppp.secret.
			`#`
			`# If remote system sends its system name within CHAP packet and it is`
			`# found in /etc/ppp.secret, then secret key is taken from the file and`
			`# value of authkey is ignored.`
			`#`
			`chapsite:`
			`set phone 12345678`
			`set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp"`
			`deny pap`
			`accept chap`
			`# enable chap`
			`set authname MySystemName`
			`set authkey OurSecretKey`
			`#`
Another round of spelling fixes. 1996-01-31 15:03:18 +00:00			`# To speak PAP is just similar to CHAP`
Reviewed by: 1995-01-31 06:24:33 +00:00			`#`
			`papsite:`
			`set phone 12345678`
			`set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp"`
			`deny chap`
			`accept pap`
			`# enable pap`
			`set authname MyUserName`
			`set authkey MyPassword`
			`#`
			`# On demand dialup example`
			`# Here, we assume that local side use 192.244.185.226 and`
			`# remote side use 192.244.176.44 as their IP address.`
			`# You must supply -auto option to invoke PPP.`
			`#`
			`# ex. % ppp -auto ondemand`
			`#`
			`ondemand:`
			`set phone 1234567`
			`set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp"`
			`set timeout 120`
Fix several places where interface netmask was in place of route netmask Fix dialout device name Add multi-phone example 1996-03-08 09:39:45 +00:00			`set ifaddr 192.244.185.226 192.244.176.44 255.255.255.0`
			`add 0 0 192.244.176.44`
Reviewed by: 1995-01-31 06:24:33 +00:00			`#`
			`# Another on demand example`
			`# If peer assign some IP address for us, and we can't predict it`
			`# until we make a connection, use 0 as local side address.`
			`#`
			`pmdemend:`
			`set phone 1234567`
			`set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp"`
			`set timeout 120`
Fix several places where interface netmask was in place of route netmask Fix dialout device name Add multi-phone example 1996-03-08 09:39:45 +00:00			`set ifaddr 0 192.244.176.44 255.255.255.0`
			`add 0 0 192.244.176.44`
Reviewed by: 1995-01-31 06:24:33 +00:00			`#`
			`# Example to validate incoming user with CHAP`
			# Invod as ``ppp -direct users'' from login script. User's system name
			`# and secret-key must be registered into /etc/ppp.secret.`
			`# IP address assigned to peer is registered in ppp.secret, then that`
			# value is used and value in ``ifaddr'' command has no effect.
			`#`
			`users:`
			`disable pap`
			`enable chap`
New user Process PPP based on iij-ppp0.94beta2. o Supporting SYNC SIO device (But need a device driver) - add "set speed sync" o Fixing bug for Predictor-1 function. o Add new parameter that re-sent interval for set timeout commands. o Improving RTT (Round Trip Time) and reducing processor time. - Previous Timer service was using polling, and now using SIGALRM ;-) - A 0.94beta2 will not work correctly.... -- Follows are additinal feature not including 0.94beta2 o Support Proxy ARP - add "enable/disable proxy" commands o Marging common routine in CHAP/PAP. o Enhancing LCP/IPCP log information. o Support local Authfication connection on port 300x and tty. - You can set up pair of your "hostname -s" and password in ppp.secret. if either ppp.secret file nor your hostname line don't exist, It will notify a message and working as same as previous version.(Backword compatibility) - If you did set up them, It's allow connection but nothing to do except help and passwd command. - add "passwd yourpasswd" commands o Support afilter - keep Alive filter that a packet can send/receiving according to ifilter/ofilter but doesn't count it as preventing idle timer expires. - Same syntax of other filters. o Fixing bugs reported by current user for previous one. Thanks !! Reviewed by: Atsushi Murai (amurai@spec.co.jp) 1995-02-26 12:18:08 +00:00			`enable proxy`
Reviewed by: 1995-01-31 06:24:33 +00:00			`set authname ppp-server`
			`set ifaddr 192.244.176.44 292.244.184.31`
			`#`
			`# Example of Callback Request`
			`#`
			`# Here, we assume that peer will hangup the line and initiates a callback`
Another round of spelling fixes. 1996-01-31 15:03:18 +00:00			`# after successful authentication. We simply use chat script capability`
			`# and wait for a "NO CARRIER" response from our modem.`
Reviewed by: 1995-01-31 06:24:33 +00:00			`#`
			`# % ppp callback`
			`#`
			`callback:`
			`set phone 0312345678`
			`set login "ABORT NO\\sCARRIER TIMEOUT 5 login:-\\r-login: MyName word: MySecret TIMEOUT 20 DUMMY"`
			`set debug phase chat`
			`dial`
			`quit`
			`#`
			`# Example for PPP/TELNET and PPP/TCP. Read doc for further details`
			`#`
			`ppptelnet:`
			`set escape 0xff`
			`ppptcp:`
			`set device 192.244.191.33:2400`