freebsd-dev/usr.sbin/sysinstall/install.cfg

# This is the installation configuration file for my test machine,
# crate.cdrom.com.
# It is included here merely as a sort-of-documented example.
#
# $FreeBSD$

# Turn on extra debugging.
debug=yes

################################
# My host specific data
hostname=crate.cdrom.com
domainname=cdrom.com
nameserver=204.216.27.3
defaultrouter=204.216.27.228
ipaddr=204.216.27.230
netmask=255.255.255.240
################################

################################
# Which installation device to use - ftp is pointed directly at my local
# machine and the installation device is my WD8013 ethernet interface.
_ftpPath=ftp://time.cdrom.com/pub
netDev=ed0
mediaSetFTP
################################

################################
# Select which distributions we want.
dists=bin doc manpages info compat21 des src sbase ssys
distSetCustom
################################

################################
# Now set the parameters for the partition editor on ad0.  Set to use the
# disk exclusively (could also be "all" to use the whole disk but
# respecting the MBR or "free" to use only unallocated space for FreeBSD). 
disk=ad0
partition=exclusive
diskPartitionEditor

# Uncomment this instead to use only the free space and install boot manager.
#partition=free
#bootManager=booteasy
#diskPartitionEditor
################################

################################

# This assumes that slice 1 is a DOS partition and mounts it as /dos,
# which is the case on my laptop.
#
# All sizes are expressed in 512 byte blocks!

# A 20MB root partition
ad0s1-1=ufs 40960 /
# And a 20MB swap partition
ad0s1-2=swap 40960 none
# Followed by a /usr partition using all remaining space (size 0 = free space)
# and with softupdates enabled (non-zero arg following mountpoint).
ad0s1-3=ufs 0 /usr 1
# Let's do it!
diskLabelEditor

################################

################################
# Now partition the 2nd disk.
disk=ad1
partition=exclusive
diskPartitionEditor

ad1s1-1=ufs 40960 /var
ad1s1-2=ufs 0 /usr/src
diskLabelEditor
################################

################################
# And the 3rd.
disk=da0
partition=exclusive
diskPartitionEditor

da0s1-1=swap 40960 none
da0s1-2=ufs 0 /tmp
diskLabelEditor
################################


# OK, everything is set.  Do it!
installCommit

# Install some packages at the end.
package=bash-1.14.7
packageAdd
package=ncftp-2.4.2
packageAdd
package=tcsh-6.07.02
packageAdd
Add a sample script file so people have some idea of what to pass to Load. 1997-06-09 05:10:08 +00:00			`# This is the installation configuration file for my test machine,`
			`# crate.cdrom.com.`
			`# It is included here merely as a sort-of-documented example.`
Really finish softupdate setting from the label editor and fix a few cosmetic problems: o Allow it to work with scripts (see man page or install.cfg file). o Preserve old softupdates flag across newfs toggles o Clean up partitioned/labelled flag handling o Don't ask for MBR choice again if you've already written it out. o Actually document the new features. 2001-03-12 10:18:54 +00:00			`#`
			`# $FreeBSD$`
Add a sample script file so people have some idea of what to pass to Load. 1997-06-09 05:10:08 +00:00
			`# Turn on extra debugging.`
			`debug=yes`

YAMF22 1997-06-13 09:34:10 +00:00			`################################`
Add a sample script file so people have some idea of what to pass to Load. 1997-06-09 05:10:08 +00:00			`# My host specific data`
			`hostname=crate.cdrom.com`
			`domainname=cdrom.com`
			`nameserver=204.216.27.3`
			`defaultrouter=204.216.27.228`
			`ipaddr=204.216.27.230`
			`netmask=255.255.255.240`
YAMF22 1997-06-13 09:34:10 +00:00			`################################`
Add a sample script file so people have some idea of what to pass to Load. 1997-06-09 05:10:08 +00:00
YAMF22 1997-06-13 09:34:10 +00:00			`################################`
Add a sample script file so people have some idea of what to pass to Load. 1997-06-09 05:10:08 +00:00			`# Which installation device to use - ftp is pointed directly at my local`
			`# machine and the installation device is my WD8013 ethernet interface.`
There is a problem in this example script. Setting ftp=time.cdrom.com is useless, we should set _ftpPath=blah. PR: misc/29587 Submitted by: David Yeske <dyeske@yahoo.com> 2001-09-06 10:04:27 +00:00			`_ftpPath=ftp://time.cdrom.com/pub`
Add a sample script file so people have some idea of what to pass to Load. 1997-06-09 05:10:08 +00:00			`netDev=ed0`
			`mediaSetFTP`
YAMF22 1997-06-13 09:34:10 +00:00			`################################`
Add a sample script file so people have some idea of what to pass to Load. 1997-06-09 05:10:08 +00:00
YAMF22 1997-06-13 09:34:10 +00:00			`################################`
Add a sample script file so people have some idea of what to pass to Load. 1997-06-09 05:10:08 +00:00			`# Select which distributions we want.`
Remove some remaining references to LKM's. Snaps were trying to unpack slkm* etc, among other things. 1999-01-06 13:55:14 +00:00			`dists=bin doc manpages info compat21 des src sbase ssys`
YAMF22 1997-06-13 09:34:10 +00:00			`distSetCustom`
			`################################`
Add a sample script file so people have some idea of what to pass to Load. 1997-06-09 05:10:08 +00:00
YAMF22 1997-06-13 09:34:10 +00:00			`################################`
s/wd/ad/ - new ATA code 2000-02-17 04:40:11 +00:00			`# Now set the parameters for the partition editor on ad0. Set to use the`
Adjust my installation script to more closely match reality. Add a system command to script mechanism (so you can call things like tzsetup from scripts). Add noError variable for causing script errors to be ignored. 1997-06-22 09:45:41 +00:00			`# disk exclusively (could also be "all" to use the whole disk but`
			`# respecting the MBR or "free" to use only unallocated space for FreeBSD).`
s/wd/ad/ - new ATA code 2000-02-17 04:40:11 +00:00			`disk=ad0`
YAMF22 1997-06-12 08:46:51 +00:00			`partition=exclusive`
Adjust my installation script to more closely match reality. Add a system command to script mechanism (so you can call things like tzsetup from scripts). Add noError variable for causing script errors to be ignored. 1997-06-22 09:45:41 +00:00			`diskPartitionEditor`

			`# Uncomment this instead to use only the free space and install boot manager.`
YAMF22 1997-06-12 08:46:51 +00:00			`#partition=free`
			`#bootManager=booteasy`
Adjust my installation script to more closely match reality. Add a system command to script mechanism (so you can call things like tzsetup from scripts). Add noError variable for causing script errors to be ignored. 1997-06-22 09:45:41 +00:00			`#diskPartitionEditor`
			`################################`
Add a sample script file so people have some idea of what to pass to Load. 1997-06-09 05:10:08 +00:00
Adjust my installation script to more closely match reality. Add a system command to script mechanism (so you can call things like tzsetup from scripts). Add noError variable for causing script errors to be ignored. 1997-06-22 09:45:41 +00:00			`################################`
Add a sample script file so people have some idea of what to pass to Load. 1997-06-09 05:10:08 +00:00
Make some changes to the way the label editor reads script variables so you don't need to re-enter it for each and every filesystem. Heads up! This change is incompatible with the previous scripting format, so those folks (all 2 of you) using config files should take a look at the changes to the sample install.cfg file for the diskLabelEditor's new calling syntax. Finally write a man page for this thing, documenting all of the above and more. I can't drive a stake through this thing's heart without properly documenting it first, so please consider this step #1 in that process (to be honest, sysinstall will also live on for some time in the 2.2. branch since it's unlikely that the new install tools will ever make it over there - they're strictly 3.0 material). 1997-08-11 13:08:29 +00:00			`# This assumes that slice 1 is a DOS partition and mounts it as /dos,`
			`# which is the case on my laptop.`
			`#`
			`# All sizes are expressed in 512 byte blocks!`

			`# A 20MB root partition`
s/wd/ad/ - new ATA code 2000-02-17 04:40:11 +00:00			`ad0s1-1=ufs 40960 /`
Make some changes to the way the label editor reads script variables so you don't need to re-enter it for each and every filesystem. Heads up! This change is incompatible with the previous scripting format, so those folks (all 2 of you) using config files should take a look at the changes to the sample install.cfg file for the diskLabelEditor's new calling syntax. Finally write a man page for this thing, documenting all of the above and more. I can't drive a stake through this thing's heart without properly documenting it first, so please consider this step #1 in that process (to be honest, sysinstall will also live on for some time in the 2.2. branch since it's unlikely that the new install tools will ever make it over there - they're strictly 3.0 material). 1997-08-11 13:08:29 +00:00			`# And a 20MB swap partition`
s/wd/ad/ - new ATA code 2000-02-17 04:40:11 +00:00			`ad0s1-2=swap 40960 none`
Make some changes to the way the label editor reads script variables so you don't need to re-enter it for each and every filesystem. Heads up! This change is incompatible with the previous scripting format, so those folks (all 2 of you) using config files should take a look at the changes to the sample install.cfg file for the diskLabelEditor's new calling syntax. Finally write a man page for this thing, documenting all of the above and more. I can't drive a stake through this thing's heart without properly documenting it first, so please consider this step #1 in that process (to be honest, sysinstall will also live on for some time in the 2.2. branch since it's unlikely that the new install tools will ever make it over there - they're strictly 3.0 material). 1997-08-11 13:08:29 +00:00			`# Followed by a /usr partition using all remaining space (size 0 = free space)`
Really finish softupdate setting from the label editor and fix a few cosmetic problems: o Allow it to work with scripts (see man page or install.cfg file). o Preserve old softupdates flag across newfs toggles o Clean up partitioned/labelled flag handling o Don't ask for MBR choice again if you've already written it out. o Actually document the new features. 2001-03-12 10:18:54 +00:00			`# and with softupdates enabled (non-zero arg following mountpoint).`
			`ad0s1-3=ufs 0 /usr 1`
Make some changes to the way the label editor reads script variables so you don't need to re-enter it for each and every filesystem. Heads up! This change is incompatible with the previous scripting format, so those folks (all 2 of you) using config files should take a look at the changes to the sample install.cfg file for the diskLabelEditor's new calling syntax. Finally write a man page for this thing, documenting all of the above and more. I can't drive a stake through this thing's heart without properly documenting it first, so please consider this step #1 in that process (to be honest, sysinstall will also live on for some time in the 2.2. branch since it's unlikely that the new install tools will ever make it over there - they're strictly 3.0 material). 1997-08-11 13:08:29 +00:00			`# Let's do it!`
Add a sample script file so people have some idea of what to pass to Load. 1997-06-09 05:10:08 +00:00			`diskLabelEditor`

YAMF22 1997-06-13 09:34:10 +00:00			`################################`

			`################################`
			`# Now partition the 2nd disk.`
s/wd/ad/ - new ATA code 2000-02-17 04:40:11 +00:00			`disk=ad1`
YAMF22 1997-06-13 09:34:10 +00:00			`partition=exclusive`
			`diskPartitionEditor`

s/wd/ad/ - new ATA code 2000-02-17 04:40:11 +00:00			`ad1s1-1=ufs 40960 /var`
			`ad1s1-2=ufs 0 /usr/src`
YAMF22 1997-06-13 09:34:10 +00:00			`diskLabelEditor`
			`################################`

			`################################`
			`# And the 3rd.`
Doc fixes for CAM devices. If I ever truly understand the logic behind this name change, I'll be a happy man. 1998-11-21 21:45:27 +00:00			`disk=da0`
YAMF22 1997-06-13 09:34:10 +00:00			`partition=exclusive`
			`diskPartitionEditor`

Doc fixes for CAM devices. If I ever truly understand the logic behind this name change, I'll be a happy man. 1998-11-21 21:45:27 +00:00			`da0s1-1=swap 40960 none`
			`da0s1-2=ufs 0 /tmp`
YAMF22 1997-06-13 09:34:10 +00:00			`diskLabelEditor`
			`################################`

Add a sample script file so people have some idea of what to pass to Load. 1997-06-09 05:10:08 +00:00
			`# OK, everything is set. Do it!`
			`installCommit`
YAMF22 1997-06-13 18:02:34 +00:00
			`# Install some packages at the end.`
			`package=bash-1.14.7`
			`packageAdd`
			`package=ncftp-2.4.2`
			`packageAdd`
			`package=tcsh-6.07.02`
			`packageAdd`