d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4594925d80
freebsd-dev/sys/dev/ixgbe/ixgbe_x540.h

68 lines
3.1 KiB
C
Raw Normal View History

New hardware support: Intel X540 adapter support added. Some shared code reorganization along with the new adapter. Sync changes to OACTIVE in igb into this driver. Misc small fixes.
2012-01-30 16:42:02 +00:00
/******************************************************************************
Add support for certain Intel X550 devices. These include standalone X550 adapters, X552 10GbE backplane, and X552/X557-AT 10GBASE-T; with the latter two being integrated into Xeon D SoCs. As well, this bumps the ixgbe version number to 2.8.3, and includes updates to shared code for support for the new devices. Differential Revision: D2414 Reviewed by: gnn, adrian Approved by: jfv (mentor), gnn (mentor)
2015-04-30 22:53:27 +00:00
Copyright (c) 2001-2015, Intel Corporation
New hardware support: Intel X540 adapter support added. Some shared code reorganization along with the new adapter. Sync changes to OACTIVE in igb into this driver. Misc small fixes.
2012-01-30 16:42:02 +00:00
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the Intel Corporation nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
******************************************************************************/
/*$FreeBSD$*/
#ifndef _IXGBE_X540_H_
#define _IXGBE_X540_H_
#include "ixgbe_type.h"
s32 ixgbe_get_link_capabilities_X540(struct ixgbe_hw *hw,
ixgbe_link_speed *speed, bool *autoneg);
enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw);
s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw, ixgbe_link_speed speed,
First, sync to internal shared code, and then Fixes: - flow control - don't override user value on re-init - fix to make 1G optics work correctly - change to interrupt enabling - some bits were incorrect for certain hardware. - certain stats fixes, remove a duplicate increment of ierror, thanks to Scott Long for pointing these out. - shared code link interface changed, requiring some core code changes to accomodate this. - add an m_adj() to ETHER_ALIGN on the recieve side, this was requested by Mike Karels, thanks Mike. - Multicast code corrections also thanks to Mike Karels.
2013-03-04 23:07:40 +00:00
bool link_up_wait_to_complete);
New hardware support: Intel X540 adapter support added. Some shared code reorganization along with the new adapter. Sync changes to OACTIVE in igb into this driver. Misc small fixes.
2012-01-30 16:42:02 +00:00
s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw);
s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw);
u32 ixgbe_get_supported_physical_layer_X540(struct ixgbe_hw *hw);
s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw);
s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data);
s32 ixgbe_read_eerd_buffer_X540(struct ixgbe_hw *hw, u16 offset, u16 words,
u16 *data);
s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data);
s32 ixgbe_write_eewr_buffer_X540(struct ixgbe_hw *hw, u16 offset, u16 words,
u16 *data);
s32 ixgbe_update_eeprom_checksum_X540(struct ixgbe_hw *hw);
s32 ixgbe_validate_eeprom_checksum_X540(struct ixgbe_hw *hw, u16 *checksum_val);
Update to the Intel ixgbe driver: - Split the driver into independent pf and vf loadables. This is in preparation for SRIOV support which will be following shortly. This also allows us to keep a seperate revision control over the two parts, making for easier sustaining. - Make the TX/RX code a shared/seperated file, in the old code base the ixv code would miss fixes that went into ixgbe, this model will eliminate that problem. - The driver loadables will now match the device names, something that has been requested for some time. - Rather than a modules/ixgbe there is now modules/ix and modules/ixv - It will also be possible to make your static kernel with only one or the other for streamlined installs, or both. Enjoy! Submitted by: jfv and erj
2015-03-17 18:32:28 +00:00
s32 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw);
Add quad port probe support, this gives the admin proper information about the slot (which should be a PCIE Gen 3 slot for this adapter) by looking back thru the PCI parent devices to the slot device. The fix above also corrects the bandwidth display to GT/s rather than the incorrect Gb/s Next, allow the use of ALTQ if you select the compile option IXGBE_LEGACY_TX. Allow the use of 'unsupported' optic modules by a compile option as well. Add a phy reset capability into the stop code, this is so a static configured driver will still behave properly when taken down (not being able to unload it). This revision synchronizes the shared code with Intel internal current code, and note that it now includes DCB supporting code, this was necessitated by some internal changes with the code, but it also will provide the opportunity to develop this feature in the core driver down the road. I have edited the README to get rid of some of the worse anachronisms in it as well, its by no means as robust as I might wish at this point however. Oh, I also have included some conditional stuff in the code so it will be compatible in both the 9.X and 10 environments. Performance has been a focus in recent changes and I believe this revision driver will perform very well in most workloads. MFC after: 2 weeks
2013-06-18 21:28:19 +00:00
s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw);
New hardware support: Intel X540 adapter support added. Some shared code reorganization along with the new adapter. Sync changes to OACTIVE in igb into this driver. Misc small fixes.
2012-01-30 16:42:02 +00:00
Update to the Intel ixgbe driver: - Split the driver into independent pf and vf loadables. This is in preparation for SRIOV support which will be following shortly. This also allows us to keep a seperate revision control over the two parts, making for easier sustaining. - Make the TX/RX code a shared/seperated file, in the old code base the ixv code would miss fixes that went into ixgbe, this model will eliminate that problem. - The driver loadables will now match the device names, something that has been requested for some time. - Rather than a modules/ixgbe there is now modules/ix and modules/ixv - It will also be possible to make your static kernel with only one or the other for streamlined installs, or both. Enjoy! Submitted by: jfv and erj
2015-03-17 18:32:28 +00:00
s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask);
void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask);
New hardware support: Intel X540 adapter support added. Some shared code reorganization along with the new adapter. Sync changes to OACTIVE in igb into this driver. Misc small fixes.
2012-01-30 16:42:02 +00:00
s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index);
s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index);
#endif /* _IXGBE_X540_H_ */
Add quad port probe support, this gives the admin proper information about the slot (which should be a PCIE Gen 3 slot for this adapter) by looking back thru the PCI parent devices to the slot device. The fix above also corrects the bandwidth display to GT/s rather than the incorrect Gb/s Next, allow the use of ALTQ if you select the compile option IXGBE_LEGACY_TX. Allow the use of 'unsupported' optic modules by a compile option as well. Add a phy reset capability into the stop code, this is so a static configured driver will still behave properly when taken down (not being able to unload it). This revision synchronizes the shared code with Intel internal current code, and note that it now includes DCB supporting code, this was necessitated by some internal changes with the code, but it also will provide the opportunity to develop this feature in the core driver down the road. I have edited the README to get rid of some of the worse anachronisms in it as well, its by no means as robust as I might wish at this point however. Oh, I also have included some conditional stuff in the code so it will be compatible in both the 9.X and 10 environments. Performance has been a focus in recent changes and I believe this revision driver will perform very well in most workloads. MFC after: 2 weeks
2013-06-18 21:28:19 +00:00
Reference in New Issue Copy Permalink