d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
49f053978d
freebsd-dev/stand/mips/beri/loader/Makefile

111 lines
3.1 KiB
Makefile
Raw Normal View History

Commit a first cut at ports of boot2 and loader to 64-bit MIPS, with a particular interest in (and support for) SRI International and the University of Cambridge's BERI FPGA soft-core processor. This includes micro device drivers for the Altera JTAG UART console, memory-mapped flash, and the Altera SD Card IP core in both boot2 and loader. boot2 can be written to the on-board Intel StrataFlash on the DE4 board, and loader can be placed in StrataFlash or the SD Card. Plenty of XXX comments, but works quite well locally in practice and I am using it daily. Although I had originally ported the ARM version of boot2, the current version is x86-derived as that proved more feature-complete. As we don't currently use partitions on our flash disks, support for that has been commented out relative to x86, but would be easy to add back. FDT support has not yet been hooked up, although some skeleton parts have been put in place for that. This may well be a useful starting point for ports to other 32-bit and 64-bit MIPS-ISA systems. This merge is synchronised to CheriBSD github commit e41d74fd719525d4dd7a7ee499114679165eeaf6, but with some additions of $FreeBSD. MFC after: 3 weeks Sponsored by: DARPA, AFRAL
2014-02-18 23:18:32 +00:00
#-
# Copyright (c) 2013-2014 Robert N. M. Watson
# All rights reserved.
#
# This software was developed by SRI International and the University of
# Cambridge Computer Laboratory under DARPA/AFRL contract (FA8750-10-C-0237)
# ("CTSRD"), as part of the DARPA CRASH research programme.
#
Replace Apache-style license on two Makefiles with stock 2-clause BSD; license, although the former is pretty safe, it wasn't intended to be used in the version of MIPS boot2/loader upstreamed to FreeBSD. MFC after: 3 weeks Sponsored by: DARPA, AFRL
2014-02-18 23:22:54 +00:00
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
Commit a first cut at ports of boot2 and loader to 64-bit MIPS, with a particular interest in (and support for) SRI International and the University of Cambridge's BERI FPGA soft-core processor. This includes micro device drivers for the Altera JTAG UART console, memory-mapped flash, and the Altera SD Card IP core in both boot2 and loader. boot2 can be written to the on-board Intel StrataFlash on the DE4 board, and loader can be placed in StrataFlash or the SD Card. Plenty of XXX comments, but works quite well locally in practice and I am using it daily. Although I had originally ported the ARM version of boot2, the current version is x86-derived as that proved more feature-complete. As we don't currently use partitions on our flash disks, support for that has been commented out relative to x86, but would be easy to add back. FDT support has not yet been hooked up, although some skeleton parts have been put in place for that. This may well be a useful starting point for ports to other 32-bit and 64-bit MIPS-ISA systems. This merge is synchronised to CheriBSD github commit e41d74fd719525d4dd7a7ee499114679165eeaf6, but with some additions of $FreeBSD. MFC after: 3 weeks Sponsored by: DARPA, AFRAL
2014-02-18 23:18:32 +00:00
#
Replace Apache-style license on two Makefiles with stock 2-clause BSD; license, although the former is pretty safe, it wasn't intended to be used in the version of MIPS boot2/loader upstreamed to FreeBSD. MFC after: 3 weeks Sponsored by: DARPA, AFRL
2014-02-18 23:22:54 +00:00
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
Commit a first cut at ports of boot2 and loader to 64-bit MIPS, with a particular interest in (and support for) SRI International and the University of Cambridge's BERI FPGA soft-core processor. This includes micro device drivers for the Altera JTAG UART console, memory-mapped flash, and the Altera SD Card IP core in both boot2 and loader. boot2 can be written to the on-board Intel StrataFlash on the DE4 board, and loader can be placed in StrataFlash or the SD Card. Plenty of XXX comments, but works quite well locally in practice and I am using it daily. Although I had originally ported the ARM version of boot2, the current version is x86-derived as that proved more feature-complete. As we don't currently use partitions on our flash disks, support for that has been commented out relative to x86, but would be easy to add back. FDT support has not yet been hooked up, although some skeleton parts have been put in place for that. This may well be a useful starting point for ports to other 32-bit and 64-bit MIPS-ISA systems. This merge is synchronised to CheriBSD github commit e41d74fd719525d4dd7a7ee499114679165eeaf6, but with some additions of $FreeBSD. MFC after: 3 weeks Sponsored by: DARPA, AFRAL
2014-02-18 23:18:32 +00:00
#
# $FreeBSD$
loader: set options before including bsd.init.mk bsd.init.mk ends up including defs.mk so the per-arch options must be set before including defs.mk, or else the global defaults will be used and the per-arch ones will be ignored. Although better, note that the usage of MK_FDT before the inclusion of bsd.init.mk is incorrect but doesn't lead to build errors. This circular dependency must be broken in order for this to work correctly. Reviewed by: imp Sponsored by: Citrix Systems R&D
2017-11-08 14:44:45 +00:00
LOADER_MSDOS_SUPPORT?= yes
LOADER_UFS_SUPPORT?= yes
LOADER_CD9660_SUPPORT?= no
LOADER_EXT2FS_SUPPORT?= no
LOADER_GZIP_SUPPORT?= yes
LOADER_BZIP2_SUPPORT?= yes
Use defs.mk defins in most MD code Use defines from defs.mk in most MD code (the biggest exception is x86, which will be its own commit due to its size). Prefer including bsd.init.mk over the variations (../Makefile.inc and src.opts.mk being the two biggest ones). Sponsored by: Netflix
2017-10-30 03:12:28 +00:00
.include <bsd.init.mk>
Commit a first cut at ports of boot2 and loader to 64-bit MIPS, with a particular interest in (and support for) SRI International and the University of Cambridge's BERI FPGA soft-core processor. This includes micro device drivers for the Altera JTAG UART console, memory-mapped flash, and the Altera SD Card IP core in both boot2 and loader. boot2 can be written to the on-board Intel StrataFlash on the DE4 board, and loader can be placed in StrataFlash or the SD Card. Plenty of XXX comments, but works quite well locally in practice and I am using it daily. Although I had originally ported the ARM version of boot2, the current version is x86-derived as that proved more feature-complete. As we don't currently use partitions on our flash disks, support for that has been commented out relative to x86, but would be easy to add back. FDT support has not yet been hooked up, although some skeleton parts have been put in place for that. This may well be a useful starting point for ports to other 32-bit and 64-bit MIPS-ISA systems. This merge is synchronised to CheriBSD github commit e41d74fd719525d4dd7a7ee499114679165eeaf6, but with some additions of $FreeBSD. MFC after: 3 weeks Sponsored by: DARPA, AFRAL
2014-02-18 23:18:32 +00:00
MK_SSP= no
Fix fallouts from r284590 Reported by: kib
2015-06-19 14:20:21 +00:00
MAN=
Commit a first cut at ports of boot2 and loader to 64-bit MIPS, with a particular interest in (and support for) SRI International and the University of Cambridge's BERI FPGA soft-core processor. This includes micro device drivers for the Altera JTAG UART console, memory-mapped flash, and the Altera SD Card IP core in both boot2 and loader. boot2 can be written to the on-board Intel StrataFlash on the DE4 board, and loader can be placed in StrataFlash or the SD Card. Plenty of XXX comments, but works quite well locally in practice and I am using it daily. Although I had originally ported the ARM version of boot2, the current version is x86-derived as that proved more feature-complete. As we don't currently use partitions on our flash disks, support for that has been commented out relative to x86, but would be easy to add back. FDT support has not yet been hooked up, although some skeleton parts have been put in place for that. This may well be a useful starting point for ports to other 32-bit and 64-bit MIPS-ISA systems. This merge is synchronised to CheriBSD github commit e41d74fd719525d4dd7a7ee499114679165eeaf6, but with some additions of $FreeBSD. MFC after: 3 weeks Sponsored by: DARPA, AFRAL
2014-02-18 23:18:32 +00:00
PROG?= loader
NEWVERSWHAT= "BERI loader" ${MACHINE_CPUARCH}
INSTALLFLAGS= -b
# Architecture-specific loader code
SRCS= start.S \
main.c \
devicename.c \
exec.c \
metadata.c \
vers.c \
arch.c
# libstand front-ends for shared driver code
SRCS+= beri_console.c \
beri_disk_cfi.c \
beri_disk_sdcard.c
# Common code with boot2
SRCS+= altera_jtag_uart.c \
cfi.c \
sdcard.c
# Since we don't have a backward compatibility issue, default to this on BERI.
CFLAGS+= -DBOOT_PROMPT_123
Move loader help file definitions to being 100% inside of loader.mk. HELP_FILES is a loader only thing, so move it to loader.mk. Only generate the help file if HELP_FILES is defined. Adjust Makefiles to new convention. Fix a few cases where ${.CURDIR}/ was missing resulting in missing bits from the help files. Sponsored by: Netflix
2017-12-18 04:51:34 +00:00
HELP_FILES= ${.CURDIR}/help.mips
Install the 4th files in sys/boot/forth instead of each loader Also, move generation of loader.help into loader.mk. Set HELP_FILES= to disable this (so we only install one help file, for now). At the same time remove some duplicate -I lines. Fix several FILES= and CLEANFILES= into the += form since we're touching both of those in the .mk files. Make sure we only build one loader.help file per platform in a unified way (we were building many on some, with the last to install winning, though often they were the same text). Also, we're now installing loader.rc and menu.rc everywhere. arm and mips uboot installed these as menu.rc.sample, but there's no need since the loader.rc for those platforms doesn't do menu.rc processing by default. pcibios.4th is now installed everywhere, but will failsafe on non x86 platforms (it isn't loaded by default anywhere). These changes are too intertwined to do separately since aspects of each are required to have a bug-free commit. Sponsored by: Netflix
2017-11-10 23:54:58 +00:00
Commit a first cut at ports of boot2 and loader to 64-bit MIPS, with a particular interest in (and support for) SRI International and the University of Cambridge's BERI FPGA soft-core processor. This includes micro device drivers for the Altera JTAG UART console, memory-mapped flash, and the Altera SD Card IP core in both boot2 and loader. boot2 can be written to the on-board Intel StrataFlash on the DE4 board, and loader can be placed in StrataFlash or the SD Card. Plenty of XXX comments, but works quite well locally in practice and I am using it daily. Although I had originally ported the ARM version of boot2, the current version is x86-derived as that proved more feature-complete. As we don't currently use partitions on our flash disks, support for that has been commented out relative to x86, but would be easy to add back. FDT support has not yet been hooked up, although some skeleton parts have been put in place for that. This may well be a useful starting point for ports to other 32-bit and 64-bit MIPS-ISA systems. This merge is synchronised to CheriBSD github commit e41d74fd719525d4dd7a7ee499114679165eeaf6, but with some additions of $FreeBSD. MFC after: 3 weeks Sponsored by: DARPA, AFRAL
2014-02-18 23:18:32 +00:00
# Always add MI sources
Use defs.mk defins in most MD code Use defines from defs.mk in most MD code (the biggest exception is x86, which will be its own commit due to its size). Prefer including bsd.init.mk over the variations (../Makefile.inc and src.opts.mk being the two biggest ones). Sponsored by: Netflix
2017-10-30 03:12:28 +00:00
.include "${BOOTSRC}/loader.mk"
Commit a first cut at ports of boot2 and loader to 64-bit MIPS, with a particular interest in (and support for) SRI International and the University of Cambridge's BERI FPGA soft-core processor. This includes micro device drivers for the Altera JTAG UART console, memory-mapped flash, and the Altera SD Card IP core in both boot2 and loader. boot2 can be written to the on-board Intel StrataFlash on the DE4 board, and loader can be placed in StrataFlash or the SD Card. Plenty of XXX comments, but works quite well locally in practice and I am using it daily. Although I had originally ported the ARM version of boot2, the current version is x86-derived as that proved more feature-complete. As we don't currently use partitions on our flash disks, support for that has been commented out relative to x86, but would be easy to add back. FDT support has not yet been hooked up, although some skeleton parts have been put in place for that. This may well be a useful starting point for ports to other 32-bit and 64-bit MIPS-ISA systems. This merge is synchronised to CheriBSD github commit e41d74fd719525d4dd7a7ee499114679165eeaf6, but with some additions of $FreeBSD. MFC after: 3 weeks Sponsored by: DARPA, AFRAL
2014-02-18 23:18:32 +00:00
# BERI files common to boot2 and loader
Use defs.mk defins in most MD code Use defines from defs.mk in most MD code (the biggest exception is x86, which will be its own commit due to its size). Prefer including bsd.init.mk over the variations (../Makefile.inc and src.opts.mk being the two biggest ones). Sponsored by: Netflix
2017-10-30 03:12:28 +00:00
.PATH: ${BOOTSRC}/mips/beri/common
CFLAGS+= -I${BOOTSRC}/mips/beri/common
Commit a first cut at ports of boot2 and loader to 64-bit MIPS, with a particular interest in (and support for) SRI International and the University of Cambridge's BERI FPGA soft-core processor. This includes micro device drivers for the Altera JTAG UART console, memory-mapped flash, and the Altera SD Card IP core in both boot2 and loader. boot2 can be written to the on-board Intel StrataFlash on the DE4 board, and loader can be placed in StrataFlash or the SD Card. Plenty of XXX comments, but works quite well locally in practice and I am using it daily. Although I had originally ported the ARM version of boot2, the current version is x86-derived as that proved more feature-complete. As we don't currently use partitions on our flash disks, support for that has been commented out relative to x86, but would be easy to add back. FDT support has not yet been hooked up, although some skeleton parts have been put in place for that. This may well be a useful starting point for ports to other 32-bit and 64-bit MIPS-ISA systems. This merge is synchronised to CheriBSD github commit e41d74fd719525d4dd7a7ee499114679165eeaf6, but with some additions of $FreeBSD. MFC after: 3 weeks Sponsored by: DARPA, AFRAL
2014-02-18 23:18:32 +00:00
# Loader-specific MD headers
CFLAGS+= -I${.CURDIR}
# Generate code appropriate for the loader environment
CFLAGS+= -G0 \
-fno-pic \
-mno-abicalls \
-g
LDFLAGS= -nostdlib \
-static \
-T ${.CURDIR}/loader.ldscript \
-L${.CURDIR} \
-e __start
Define LIBSA* and use them instead of overloaded LIBSTAND LIBSA is the current stand alone library. LIBSA32 is the 32-bit version of the library. LIBSAU is the userboot version of libsa. Use the proper define instead of the more generic define. Sponsored by: Netflix
2017-10-09 22:12:46 +00:00
DPADD= ${LIBFICL} ${LIBSA}
LDADD= ${LIBFICL} ${LIBSA}
Commit a first cut at ports of boot2 and loader to 64-bit MIPS, with a particular interest in (and support for) SRI International and the University of Cambridge's BERI FPGA soft-core processor. This includes micro device drivers for the Altera JTAG UART console, memory-mapped flash, and the Altera SD Card IP core in both boot2 and loader. boot2 can be written to the on-board Intel StrataFlash on the DE4 board, and loader can be placed in StrataFlash or the SD Card. Plenty of XXX comments, but works quite well locally in practice and I am using it daily. Although I had originally ported the ARM version of boot2, the current version is x86-derived as that proved more feature-complete. As we don't currently use partitions on our flash disks, support for that has been commented out relative to x86, but would be easy to add back. FDT support has not yet been hooked up, although some skeleton parts have been put in place for that. This may well be a useful starting point for ports to other 32-bit and 64-bit MIPS-ISA systems. This merge is synchronised to CheriBSD github commit e41d74fd719525d4dd7a7ee499114679165eeaf6, but with some additions of $FreeBSD. MFC after: 3 weeks Sponsored by: DARPA, AFRAL
2014-02-18 23:18:32 +00:00
Add optional support for USB to BERI loader. Fix the linker script so that the garbage collection feature can be used when linking. Sponsored by: DARPA, AFRL
2014-05-30 16:47:54 +00:00
.if defined(LOADER_USB_SUPPORT)
# Do garbage collection
CFLAGS+= -ffunction-sections -fdata-sections
CFLAGS+= -Wl,--gc-sections
# Link USB BOOT library
Use defs.mk defins in most MD code Use defines from defs.mk in most MD code (the biggest exception is x86, which will be its own commit due to its size). Prefer including bsd.init.mk over the variations (../Makefile.inc and src.opts.mk being the two biggest ones). Sponsored by: Netflix
2017-10-30 03:12:28 +00:00
LDADD+= ${BOOTOBJ}/usb/libusbboot.a
CFLAGS+= -I${BOOTSRC}/usb
Add optional support for USB to BERI loader. Fix the linker script so that the garbage collection feature can be used when linking. Sponsored by: DARPA, AFRL
2014-05-30 16:47:54 +00:00
# Define USB SUPPORT
CFLAGS+= -DLOADER_USB_SUPPORT
.endif
Commit a first cut at ports of boot2 and loader to 64-bit MIPS, with a particular interest in (and support for) SRI International and the University of Cambridge's BERI FPGA soft-core processor. This includes micro device drivers for the Altera JTAG UART console, memory-mapped flash, and the Altera SD Card IP core in both boot2 and loader. boot2 can be written to the on-board Intel StrataFlash on the DE4 board, and loader can be placed in StrataFlash or the SD Card. Plenty of XXX comments, but works quite well locally in practice and I am using it daily. Although I had originally ported the ARM version of boot2, the current version is x86-derived as that proved more feature-complete. As we don't currently use partitions on our flash disks, support for that has been commented out relative to x86, but would be easy to add back. FDT support has not yet been hooked up, although some skeleton parts have been put in place for that. This may well be a useful starting point for ports to other 32-bit and 64-bit MIPS-ISA systems. This merge is synchronised to CheriBSD github commit e41d74fd719525d4dd7a7ee499114679165eeaf6, but with some additions of $FreeBSD. MFC after: 3 weeks Sponsored by: DARPA, AFRAL
2014-02-18 23:18:32 +00:00
all: loader
.include <bsd.prog.mk>
Reference in New Issue Copy Permalink