freebsd-dev/sys/dev/sound/pcm/feeder_volume.c

224 lines
7.5 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2005 Ariff Abdullah <ariff@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* feeder_volume, a long 'Lost Technology' rather than a new feature.
*/
#include <dev/sound/pcm/sound.h>
#include "feeder_if.h"
SND_DECLARE_FILE("$FreeBSD$");
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
MALLOC_DEFINE(M_VOLUMEFEEDER, "volumefeed", "pcm volume feeder");
#define FVOL_TRACE(x...) /* device_printf(c->dev, x) */
#define FVOL_TEST(x, y...) /* if (x) FVOL_TRACE(y) */
#define FVOL_RESOLUTION 6 /* 6bit volume resolution */
#define FVOL_CLAMP(val) (((val) << FVOL_RESOLUTION) / 100)
#define FVOL_LEFT(val) FVOL_CLAMP((val) & 0x7f)
#define FVOL_RIGHT(val) FVOL_LEFT((val) >> 8)
#define FVOL_MAX (1 << FVOL_RESOLUTION)
#define FVOL_CALC(sval, vval) (((sval) * (vval)) >> FVOL_RESOLUTION)
struct feed_volume_info;
typedef uint32_t (*feed_volume_filter)(struct feed_volume_info *,
uint8_t *, int *, uint32_t);
struct feed_volume_info {
uint32_t bps, channels;
feed_volume_filter filter;
};
#define FEEDER_VOLUME_FILTER(FMTBIT, VOL_INTCAST, SIGN, SIGNS, ENDIAN, ENDIANS) \
static uint32_t \
feed_volume_filter_##SIGNS##FMTBIT##ENDIANS(struct feed_volume_info *info, \
uint8_t *b, int *vol, uint32_t count) \
{ \
uint32_t bps; \
int32_t j; \
int i; \
\
bps = info->bps; \
i = count; \
b += i; \
while (i > 0) { \
b -= bps; \
i -= bps; \
j = PCM_READ_##SIGN##FMTBIT##_##ENDIAN(b); \
j = FVOL_CALC((VOL_INTCAST)j, vol[(i / bps) & 1]); \
PCM_WRITE_##SIGN##FMTBIT##_##ENDIAN(b, j); \
} \
return count; \
}
FEEDER_VOLUME_FILTER(8, int32_t, S, s, NE, ne)
FEEDER_VOLUME_FILTER(16, int32_t, S, s, LE, le)
FEEDER_VOLUME_FILTER(24, int32_t, S, s, LE, le)
FEEDER_VOLUME_FILTER(32, intpcm_t, S, s, LE, le)
FEEDER_VOLUME_FILTER(16, int32_t, S, s, BE, be)
FEEDER_VOLUME_FILTER(24, int32_t, S, s, BE, be)
FEEDER_VOLUME_FILTER(32, intpcm_t, S, s, BE, be)
/* unsigned */
FEEDER_VOLUME_FILTER(8, int32_t, U, u, NE, ne)
FEEDER_VOLUME_FILTER(16, int32_t, U, u, LE, le)
FEEDER_VOLUME_FILTER(24, int32_t, U, u, LE, le)
FEEDER_VOLUME_FILTER(32, intpcm_t, U, u, LE, le)
FEEDER_VOLUME_FILTER(16, int32_t, U, u, BE, be)
FEEDER_VOLUME_FILTER(24, int32_t, U, u, BE, be)
FEEDER_VOLUME_FILTER(32, intpcm_t, U, u, BE, be)
static int
feed_volume_setup(struct pcm_feeder *f)
{
struct feed_volume_info *info = f->data;
static const struct {
uint32_t format; /* pcm / audio format */
uint32_t bps; /* bytes-per-sample, regardless of
total channels */
feed_volume_filter filter;
} voltbl[] = {
{ AFMT_S8, PCM_8_BPS, feed_volume_filter_s8ne },
{ AFMT_S16_LE, PCM_16_BPS, feed_volume_filter_s16le },
{ AFMT_S24_LE, PCM_24_BPS, feed_volume_filter_s24le },
{ AFMT_S32_LE, PCM_32_BPS, feed_volume_filter_s32le },
{ AFMT_S16_BE, PCM_16_BPS, feed_volume_filter_s16be },
{ AFMT_S24_BE, PCM_24_BPS, feed_volume_filter_s24be },
{ AFMT_S32_BE, PCM_32_BPS, feed_volume_filter_s32be },
/* unsigned */
{ AFMT_U8, PCM_8_BPS, feed_volume_filter_u8ne },
{ AFMT_U16_LE, PCM_16_BPS, feed_volume_filter_u16le },
{ AFMT_U24_LE, PCM_24_BPS, feed_volume_filter_u24le },
{ AFMT_U32_LE, PCM_32_BPS, feed_volume_filter_u32le },
{ AFMT_U16_BE, PCM_16_BPS, feed_volume_filter_u16be },
{ AFMT_U24_BE, PCM_24_BPS, feed_volume_filter_u24be },
{ AFMT_U32_BE, PCM_32_BPS, feed_volume_filter_u32be },
{ 0, 0, NULL },
};
uint32_t i;
for (i = 0; i < sizeof(voltbl) / sizeof(*voltbl); i++) {
if (voltbl[i].format == 0)
return -1;
if ((f->desc->out & ~AFMT_STEREO) == voltbl[i].format) {
info->bps = voltbl[i].bps;
info->filter = voltbl[i].filter;
break;
}
}
/* For now, this is mandatory! */
info->channels = 2;
return 0;
}
static int
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
feed_volume_init(struct pcm_feeder *f)
{
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
struct feed_volume_info *info;
if (f->desc->in != f->desc->out)
return EINVAL;
/* Mandatory */
if (!(f->desc->out & AFMT_STEREO))
return EINVAL;
info = malloc(sizeof(*info), M_VOLUMEFEEDER, M_NOWAIT | M_ZERO);
if (info == NULL)
return ENOMEM;
f->data = info;
return feed_volume_setup(f);
}
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
static int
feed_volume_free(struct pcm_feeder *f)
{
struct feed_volume_info *info = f->data;
if (info)
free(info, M_VOLUMEFEEDER);
f->data = NULL;
return 0;
}
static int
feed_volume(struct pcm_feeder *f, struct pcm_channel *c, uint8_t *b,
uint32_t count, void *source)
{
struct feed_volume_info *info = f->data;
uint32_t k, smpsz;
int vol[2];
vol[0] = FVOL_LEFT(c->volume);
vol[1] = FVOL_RIGHT(c->volume);
if (vol[0] == FVOL_MAX && vol[1] == FVOL_MAX)
return FEEDER_FEED(f->source, c, b, count, source);
smpsz = info->bps * info->channels;
if (count < smpsz)
return 0;
count -= count % smpsz;
k = FEEDER_FEED(f->source, c, b, count, source);
if (k < smpsz) {
FVOL_TRACE("%s: Not enough data (Got: %u bytes)\n",
__func__, k);
return 0;
}
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
FVOL_TEST(k % smpsz, "%s: Bytes not %dbit (stereo) aligned.\n",
__func__, info->bps << 3);
k -= k % smpsz;
return info->filter(info, b, vol, k);
}
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
static struct pcm_feederdesc feeder_volume_desc[] = {
{FEEDER_VOLUME, AFMT_S8 | AFMT_STEREO, AFMT_S8 | AFMT_STEREO, 0},
{FEEDER_VOLUME, AFMT_S16_LE | AFMT_STEREO, AFMT_S16_LE | AFMT_STEREO, 0},
{FEEDER_VOLUME, AFMT_S24_LE | AFMT_STEREO, AFMT_S24_LE | AFMT_STEREO, 0},
{FEEDER_VOLUME, AFMT_S32_LE | AFMT_STEREO, AFMT_S32_LE | AFMT_STEREO, 0},
{FEEDER_VOLUME, AFMT_S16_BE | AFMT_STEREO, AFMT_S16_BE | AFMT_STEREO, 0},
{FEEDER_VOLUME, AFMT_S24_BE | AFMT_STEREO, AFMT_S24_BE | AFMT_STEREO, 0},
{FEEDER_VOLUME, AFMT_S32_BE | AFMT_STEREO, AFMT_S32_BE | AFMT_STEREO, 0},
/* unsigned */
{FEEDER_VOLUME, AFMT_U8 | AFMT_STEREO, AFMT_U8 | AFMT_STEREO, 0},
{FEEDER_VOLUME, AFMT_U16_LE | AFMT_STEREO, AFMT_U16_LE | AFMT_STEREO, 0},
{FEEDER_VOLUME, AFMT_U24_LE | AFMT_STEREO, AFMT_U24_LE | AFMT_STEREO, 0},
{FEEDER_VOLUME, AFMT_U32_LE | AFMT_STEREO, AFMT_U32_LE | AFMT_STEREO, 0},
{FEEDER_VOLUME, AFMT_U16_BE | AFMT_STEREO, AFMT_U16_BE | AFMT_STEREO, 0},
{FEEDER_VOLUME, AFMT_U24_BE | AFMT_STEREO, AFMT_U24_BE | AFMT_STEREO, 0},
{FEEDER_VOLUME, AFMT_U32_BE | AFMT_STEREO, AFMT_U32_BE | AFMT_STEREO, 0},
{0, 0, 0, 0},
};
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
static kobj_method_t feeder_volume_methods[] = {
KOBJMETHOD(feeder_init, feed_volume_init),
KOBJMETHOD(feeder_free, feed_volume_free),
KOBJMETHOD(feeder_feed, feed_volume),
{0, 0}
};
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
FEEDER_DECLARE(feeder_volume, 2, NULL);