freebsd-dev/lib/libc_r/uthread/uthread_sendfile.c

195 lines
5.1 KiB
C
Raw Normal View History

/*
* Copyright (C) 2000 Jason Evans <jasone@freebsd.org>.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice(s), this list of conditions and the following disclaimer as
* the first lines of this file unmodified other than the possible
* addition of one or more copyright notices.
* 2. Redistributions in binary form must reproduce the above copyright
* notice(s), this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#include <sys/fcntl.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <sys/uio.h>
#include <errno.h>
#include <pthread.h>
#include "pthread_private.h"
__weak_reference(_sendfile, sendfile);
int
_sendfile(int fd, int s, off_t offset, size_t nbytes, struct sf_hdtr *hdtr,
off_t *sbytes, int flags)
{
struct pthread *curthread = _get_curthread();
int type, blocking;
int ret = 0;
ssize_t wvret, num = 0;
off_t n, nwritten = 0;
/*
* Write the headers if any.
* If some data is written but not all we must return here.
*/
if ((hdtr != NULL) && (hdtr->headers != NULL)) {
Implement zero system call thread switching. Performance of thread switches should be on par with that under scheduler activations. o Timing is achieved through the use of a fixed interval timer (ITIMER_PROF) to count scheduling ticks instead of retrieving the time-of-day upon every thread switch and calculating elapsed real time. o Polling for I/O readiness is performed once for each scheduling tick instead of every thread switch. o The non-signal saving/restoring versions of setjmp/longjmp are used to save and restore thread contexts. This may allow the removal of _THREAD_SAFE macros from setjmp() and longjmp() - needs more investigation. Change signal handling so that signals are handled in the context of the thread that is receiving the signal. When signals are dispatched to a thread, a special signal handling frame is created on top of the target threads stack. The frame contains the threads saved state information and a new context in which the thread can run. The applications signal handler is invoked through a wrapper routine that knows how to restore the threads saved state and unwind to previous frames. Fix interruption of threads due to signals. Some states were being improperly interrupted while other states were not being interrupted. This should fix several PRs. Signal handlers, which are invoked as a result of a process signal (not by pthread_kill()), are now called with the code (or siginfo_t if SA_SIGINFO was set in sa_flags) and sigcontext_t as received from the process signal handler. Modify the search for a thread to which a signal is delivered. The search algorithm is now: o First thread found in sigwait() with signal in wait mask. o First thread found sigsuspend()'d on the signal. o Current thread if signal is unmasked. o First thread found with signal unmasked. Collapse machine dependent support into macros defined in pthread_private.h. These should probably eventually be moved into separate MD files. Change the range of settable priorities to be compliant with POSIX (0-31). The threads library uses higher priorities internally for real-time threads (not yet implemented) and threads executing signal handlers. Real-time threads and threads running signal handlers add 64 and 32, respectively, to a threads base priority. Some other small changes and cleanups. PR: 17757 18559 21943 Reviewed by: jasone
2000-10-13 22:12:32 +00:00
if ((wvret = writev(s, hdtr->headers, hdtr->hdr_cnt)) == -1) {
ret = -1;
goto ERROR;
} else {
int i;
ssize_t hdrtot;
nwritten += wvret;
for (i = 0, hdrtot = 0; i < hdtr->hdr_cnt; i++)
hdrtot += hdtr->headers[i].iov_len;
if (wvret < hdrtot)
goto SHORT_WRITE;
}
}
/* Lock the descriptors. */
if ((ret = _FD_LOCK(fd, FD_READ, NULL)) != 0) {
ret = -1;
errno = EBADF;
goto ERROR;
}
if ((ret = _FD_LOCK(s, FD_WRITE, NULL)) != 0) {
ret = -1;
errno = EBADF;
goto ERROR_1;
}
/* Check the descriptor access modes. */
type = _thread_fd_getflags(fd) & O_ACCMODE;
if (type != O_RDONLY && type != O_RDWR) {
/* File is not open for read. */
ret = -1;
errno = EBADF;
goto ERROR_2;
}
type = _thread_fd_getflags(s) & O_ACCMODE;
if (type != O_WRONLY && type != O_RDWR) {
/* File is not open for write. */
ret = -1;
errno = EBADF;
goto ERROR_2;
}
/* Check if file operations are to block */
blocking = ((_thread_fd_getflags(s) & O_NONBLOCK) == 0);
/*
* Loop while no error occurs and until the expected number of bytes are
* written.
*/
for (;;) {
/* Perform a non-blocking sendfile syscall. */
ret = __sys_sendfile(fd, s, offset + num, nbytes - num,
NULL, &n, flags);
/*
* We have to handle the sideways return path of sendfile.
*
* If the result is 0, we're done.
* If the result is anything else check the errno.
* If the errno is not EGAIN return the error.
* Otherwise, take into account how much
* sendfile may have written for us because sendfile can
* return EAGAIN even though it has written data.
*
* We don't clear 'ret' because the sendfile(2) syscall
* would not have either.
*/
if (ret == 0) {
/* Writing completed. */
num += n;
break;
} else if ((ret == -1) && (errno == EAGAIN)) {
/*
* Some bytes were written but there are still more to
* write.
*/
/* Update the count of bytes written. */
num += n;
/*
* If we're not blocking then return.
*/
if (!blocking) {
_FD_UNLOCK(s, FD_WRITE);
_FD_UNLOCK(fd, FD_READ);
goto SHORT_WRITE;
}
/*
* Otherwise wait on the fd.
*/
curthread->data.fd.fd = fd;
_thread_kern_set_timeout(NULL);
/* Reset the interrupted operation flag. */
curthread->interrupted = 0;
_thread_kern_sched_state(PS_FDW_WAIT, __FILE__,
__LINE__);
if (curthread->interrupted) {
/* Interrupted by a signal. Return an error. */
break;
}
} else {
/* Incomplete non-blocking syscall, or error. */
break;
}
}
ERROR_2:
_FD_UNLOCK(s, FD_WRITE);
ERROR_1:
_FD_UNLOCK(fd, FD_READ);
ERROR:
if (ret == 0) {
/* Write the trailers, if any. */
if ((hdtr != NULL) && (hdtr->trailers != NULL)) {
Implement zero system call thread switching. Performance of thread switches should be on par with that under scheduler activations. o Timing is achieved through the use of a fixed interval timer (ITIMER_PROF) to count scheduling ticks instead of retrieving the time-of-day upon every thread switch and calculating elapsed real time. o Polling for I/O readiness is performed once for each scheduling tick instead of every thread switch. o The non-signal saving/restoring versions of setjmp/longjmp are used to save and restore thread contexts. This may allow the removal of _THREAD_SAFE macros from setjmp() and longjmp() - needs more investigation. Change signal handling so that signals are handled in the context of the thread that is receiving the signal. When signals are dispatched to a thread, a special signal handling frame is created on top of the target threads stack. The frame contains the threads saved state information and a new context in which the thread can run. The applications signal handler is invoked through a wrapper routine that knows how to restore the threads saved state and unwind to previous frames. Fix interruption of threads due to signals. Some states were being improperly interrupted while other states were not being interrupted. This should fix several PRs. Signal handlers, which are invoked as a result of a process signal (not by pthread_kill()), are now called with the code (or siginfo_t if SA_SIGINFO was set in sa_flags) and sigcontext_t as received from the process signal handler. Modify the search for a thread to which a signal is delivered. The search algorithm is now: o First thread found in sigwait() with signal in wait mask. o First thread found sigsuspend()'d on the signal. o Current thread if signal is unmasked. o First thread found with signal unmasked. Collapse machine dependent support into macros defined in pthread_private.h. These should probably eventually be moved into separate MD files. Change the range of settable priorities to be compliant with POSIX (0-31). The threads library uses higher priorities internally for real-time threads (not yet implemented) and threads executing signal handlers. Real-time threads and threads running signal handlers add 64 and 32, respectively, to a threads base priority. Some other small changes and cleanups. PR: 17757 18559 21943 Reviewed by: jasone
2000-10-13 22:12:32 +00:00
if ((wvret = writev(s, hdtr->trailers, hdtr->trl_cnt))
== -1)
ret = -1;
else
nwritten += wvret;
}
}
SHORT_WRITE:
if (sbytes != NULL) {
/*
* Number of bytes written in headers/trailers, plus in the main
* sendfile() loop.
*/
*sbytes = nwritten + num;
}
return (ret);
}