freebsd-dev/sys/dev/mii/jmphyreg.h

/*-
 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
 *
 * Copyright (c) 2008, Pyun YongHyeon
 * All rights reserved.
 *              
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:             
 * 1. Redistributions of source code must retain the above copyright
 *    notice unmodified, this list of conditions, and the following
 *    disclaimer.  
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * $FreeBSD$
 */

#ifndef	_DEV_MII_JMPHYREG_H_
#define	_DEV_MII_JMPHYREG_H_

/*
 * Registers for the JMicron JMC250 Gigabit PHY.
 */

/* PHY specific status register. */
#define JMPHY_SSR			0x11
#define JMPHY_SSR_SPEED_1000		0x8000
#define JMPHY_SSR_SPEED_100		0x4000
#define JMPHY_SSR_SPEED_10		0x0000
#define JMPHY_SSR_SPEED_MASK		0xC000
#define JMPHY_SSR_DUPLEX		0x2000
#define JMPHY_SSR_SPD_DPLX_RESOLVED	0x0800
#define JMPHY_SSR_LINK_UP		0x0400
#define JMPHY_SSR_MDI_XOVER		0x0040
#define	JMPHY_SSR_INV_POLARITY		0x0002

/* PHY specific cable length status register. */
#define	JMPHY_SCL			0x17
#define	JMPHY_SCL_CHAN_D_MASK		0xF000
#define	JMPHY_SCL_CHAN_C_MASK		0x0F00
#define	JMPHY_SCL_CHAN_B_MASK		0x00F0
#define	JMPHY_SCL_CHAN_A_MASK		0x000F
#define	JMPHY_SCL_LEN_35		0
#define	JMPHY_SCL_LEN_40		1
#define	JMPHY_SCL_LEN_50		2
#define	JMPHY_SCL_LEN_60		3
#define	JMPHY_SCL_LEN_70		4
#define	JMPHY_SCL_LEN_80		5
#define	JMPHY_SCL_LEN_90		6
#define	JMPHY_SCL_LEN_100		7
#define	JMPHY_SCL_LEN_110		8
#define	JMPHY_SCL_LEN_120		9
#define	JMPHY_SCL_LEN_130		10
#define	JMPHY_SCL_LEN_140		11
#define	JMPHY_SCL_LEN_150		12
#define	JMPHY_SCL_LEN_160		13
#define	JMPHY_SCL_LEN_170		14
#define	JMPHY_SCL_RSVD			15

/* PHY specific LED control register 1. */
#define	JMPHY_LED_CTL1			0x18
#define	JMPHY_LED_BLINK_42MS		0x0000
#define	JMPHY_LED_BLINK_84MS		0x2000
#define	JMPHY_LED_BLINK_170MS		0x4000
#define	JMPHY_LED_BLINK_340MS		0x6000
#define	JMPHY_LED_BLINK_670MS		0x8000
#define	JMPHY_LED_BLINK_MASK		0xE000
#define	JMPHY_LED_FLP_GAP_MASK		0x1F00
#define	JMPHY_LED_FLP_GAP_DEFULT	0x1000
#define	JMPHY_LED2_POLARITY_MASK	0x0030
#define	JMPHY_LED1_POLARITY_MASK	0x000C
#define	JMPHY_LED0_POLARITY_MASK	0x0003
#define	JMPHY_LED_ON_LO_OFF_HI		0
#define	JMPHY_LED_ON_HI_OFF_HI		1
#define	JMPHY_LED_ON_LO_OFF_TS		2
#define	JMPHY_LED_ON_HI_OFF_TS		3

/* PHY specific LED control register 2. */
#define	JMPHY_LED_CTL2			0x19
#define	JMPHY_LED_NO_STRETCH		0x0000
#define	JMPHY_LED_STRETCH_42MS		0x2000
#define	JMPHY_LED_STRETCH_84MS		0x4000
#define	JMPHY_LED_STRETCH_170MS		0x6000
#define	JMPHY_LED_STRETCH_340MS		0x8000
#define	JMPHY_LED_STRETCH_670MS		0xB000
#define	JMPHY_LED_STRETCH_1300MS	0xC000
#define	JMPHY_LED_STRETCH_2700MS	0xE000
#define	JMPHY_LED2_MODE_MASK		0x0F00
#define	JMPHY_LED1_MODE_MASK		0x00F0
#define	JMPHY_LED0_MODE_MASK		0x000F

/* PHY specific test mode control register. */
#define	JMPHY_TMCTL			0x1A
#define	JMPHY_TMCTL_SLEEP_ENB		0x1000

/* PHY specific configuration register. */
#define	JMPHY_SPEC_ADDR			0x1E
#define	JMPHY_SPEC_ADDR_READ		0x4000
#define	JMPHY_SPEC_ADDR_WRITE		0x8000

#define	JMPHY_SPEC_DATA			0x1F

#define	JMPHY_EXT_COMM_2		0x32

#endif	/* _DEV_MII_JMPHYREG_H_ */
Add JMicron JMP202/JMP211 PHY driver. 2008-05-27 01:16:40 +00:00			`/*-`
sys/dev: further adoption of SPDX licensing ID tags. Mainly focus on files that use BSD 2-Clause license, however the tool I was using misidentified many licenses so this was mostly a manual - error prone - task. The Software Package Data Exchange (SPDX) group provides a specification to make it easier for automated tools to detect and summarize well known opensource licenses. We are gradually adopting the specification, noting that the tags are considered only advisory and do not, in any way, superceed or replace the license texts. 2017-11-27 14:52:40 +00:00			`* SPDX-License-Identifier: BSD-2-Clause-FreeBSD`
			`*`
Add JMicron JMP202/JMP211 PHY driver. 2008-05-27 01:16:40 +00:00			`* Copyright (c) 2008, Pyun YongHyeon`
			`* All rights reserved.`
			`*`
			`* Redistribution and use in source and binary forms, with or without`
			`* modification, are permitted provided that the following conditions`
			`* are met:`
			`* 1. Redistributions of source code must retain the above copyright`
			`* notice unmodified, this list of conditions, and the following`
			`* disclaimer.`
			`* 2. Redistributions in binary form must reproduce the above copyright`
			`* notice, this list of conditions and the following disclaimer in the`
			`* documentation and/or other materials provided with the distribution.`
			`*`
			* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
			`* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE`
			`* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE`
			`* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE`
			`* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL`
			`* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS`
			`* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)`
			`* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT`
			`* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY`
			`* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF`
			`* SUCH DAMAGE.`
			`*`
			`* $FreeBSD$`
			`*/`

			`#ifndef _DEV_MII_JMPHYREG_H_`
			`#define _DEV_MII_JMPHYREG_H_`

			`/*`
			`* Registers for the JMicron JMC250 Gigabit PHY.`
			`*/`

			`/* PHY specific status register. */`
			`#define JMPHY_SSR 0x11`
			`#define JMPHY_SSR_SPEED_1000 0x8000`
			`#define JMPHY_SSR_SPEED_100 0x4000`
			`#define JMPHY_SSR_SPEED_10 0x0000`
			`#define JMPHY_SSR_SPEED_MASK 0xC000`
			`#define JMPHY_SSR_DUPLEX 0x2000`
			`#define JMPHY_SSR_SPD_DPLX_RESOLVED 0x0800`
			`#define JMPHY_SSR_LINK_UP 0x0400`
			`#define JMPHY_SSR_MDI_XOVER 0x0040`
			`#define JMPHY_SSR_INV_POLARITY 0x0002`

			`/* PHY specific cable length status register. */`
			`#define JMPHY_SCL 0x17`
			`#define JMPHY_SCL_CHAN_D_MASK 0xF000`
			`#define JMPHY_SCL_CHAN_C_MASK 0x0F00`
			`#define JMPHY_SCL_CHAN_B_MASK 0x00F0`
			`#define JMPHY_SCL_CHAN_A_MASK 0x000F`
			`#define JMPHY_SCL_LEN_35 0`
			`#define JMPHY_SCL_LEN_40 1`
			`#define JMPHY_SCL_LEN_50 2`
			`#define JMPHY_SCL_LEN_60 3`
			`#define JMPHY_SCL_LEN_70 4`
			`#define JMPHY_SCL_LEN_80 5`
			`#define JMPHY_SCL_LEN_90 6`
			`#define JMPHY_SCL_LEN_100 7`
			`#define JMPHY_SCL_LEN_110 8`
			`#define JMPHY_SCL_LEN_120 9`
			`#define JMPHY_SCL_LEN_130 10`
			`#define JMPHY_SCL_LEN_140 11`
			`#define JMPHY_SCL_LEN_150 12`
			`#define JMPHY_SCL_LEN_160 13`
			`#define JMPHY_SCL_LEN_170 14`
			`#define JMPHY_SCL_RSVD 15`

			`/* PHY specific LED control register 1. */`
			`#define JMPHY_LED_CTL1 0x18`
			`#define JMPHY_LED_BLINK_42MS 0x0000`
			`#define JMPHY_LED_BLINK_84MS 0x2000`
			`#define JMPHY_LED_BLINK_170MS 0x4000`
			`#define JMPHY_LED_BLINK_340MS 0x6000`
			`#define JMPHY_LED_BLINK_670MS 0x8000`
			`#define JMPHY_LED_BLINK_MASK 0xE000`
			`#define JMPHY_LED_FLP_GAP_MASK 0x1F00`
			`#define JMPHY_LED_FLP_GAP_DEFULT 0x1000`
			`#define JMPHY_LED2_POLARITY_MASK 0x0030`
			`#define JMPHY_LED1_POLARITY_MASK 0x000C`
			`#define JMPHY_LED0_POLARITY_MASK 0x0003`
			`#define JMPHY_LED_ON_LO_OFF_HI 0`
			`#define JMPHY_LED_ON_HI_OFF_HI 1`
			`#define JMPHY_LED_ON_LO_OFF_TS 2`
			`#define JMPHY_LED_ON_HI_OFF_TS 3`

			`/* PHY specific LED control register 2. */`
			`#define JMPHY_LED_CTL2 0x19`
			`#define JMPHY_LED_NO_STRETCH 0x0000`
			`#define JMPHY_LED_STRETCH_42MS 0x2000`
			`#define JMPHY_LED_STRETCH_84MS 0x4000`
			`#define JMPHY_LED_STRETCH_170MS 0x6000`
			`#define JMPHY_LED_STRETCH_340MS 0x8000`
			`#define JMPHY_LED_STRETCH_670MS 0xB000`
			`#define JMPHY_LED_STRETCH_1300MS 0xC000`
			`#define JMPHY_LED_STRETCH_2700MS 0xE000`
			`#define JMPHY_LED2_MODE_MASK 0x0F00`
			`#define JMPHY_LED1_MODE_MASK 0x00F0`
			`#define JMPHY_LED0_MODE_MASK 0x000F`

			`/* PHY specific test mode control register. */`
			`#define JMPHY_TMCTL 0x1A`
			`#define JMPHY_TMCTL_SLEEP_ENB 0x1000`

Add support for JMicron JMC251/JMC261 Gigabit/Fast ethernet controller with Card Read Host Controller. These controllers are multi-function devices and have the same ethernet core of JMC250/JMC260. Starting from REVFM 5(chip full mask revision) controllers have the following features. o eFuse support o PCD(Packet Completion Deferring) o More advanced PHY power saving Because these controllers started to use eFuse, station address modified by driver is permanent as if it was written to EEPROM. If you have to change station address please save your controller default address to safe place before reprogramming it. There is no way to restore factory default station address. Many thanks to JMicron for continuing to support FreeBSD. HW donated by: JMicron 2010-12-18 23:52:50 +00:00			`/* PHY specific configuration register. */`
			`#define JMPHY_SPEC_ADDR 0x1E`
			`#define JMPHY_SPEC_ADDR_READ 0x4000`
			`#define JMPHY_SPEC_ADDR_WRITE 0x8000`

			`#define JMPHY_SPEC_DATA 0x1F`

			`#define JMPHY_EXT_COMM_2 0x32`

Add JMicron JMP202/JMP211 PHY driver. 2008-05-27 01:16:40 +00:00			`#endif /* _DEV_MII_JMPHYREG_H_ */`