freebsd-dev/sys/dev/usb/ugen.c

1613 lines
41 KiB
C
Raw Normal View History

/* $NetBSD: ugen.c,v 1.59 2002/07/11 21:14:28 augustss Exp $ */
1998-12-14 09:32:25 +00:00
/* Also already merged from NetBSD:
* $NetBSD: ugen.c,v 1.61 2002/09/23 05:51:20 simonb Exp $
* $NetBSD: ugen.c,v 1.64 2003/06/28 14:21:46 darrenr Exp $
* $NetBSD: ugen.c,v 1.65 2003/06/29 22:30:56 fvdl Exp $
* $NetBSD: ugen.c,v 1.68 2004/06/23 02:30:52 mycroft Exp $
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*-
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
2000-05-14 16:43:10 +00:00
* by Lennart Augustsson (lennart@augustsson.net) at
* Carlstedt Research & Technology.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#if defined(__NetBSD__) || defined(__OpenBSD__)
#include <sys/device.h>
#include <sys/ioctl.h>
#elif defined(__FreeBSD__)
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/ioccom.h>
#include <sys/conf.h>
#include <sys/fcntl.h>
#include <sys/filio.h>
#endif
#include <sys/tty.h>
#include <sys/file.h>
#if __FreeBSD_version >= 500014
#include <sys/selinfo.h>
#else
#include <sys/select.h>
#endif
#include <sys/poll.h>
#include <sys/sysctl.h>
#include <sys/uio.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdi_util.h>
#ifdef USB_DEBUG
#define DPRINTF(x) if (ugendebug) logprintf x
#define DPRINTFN(n,x) if (ugendebug>(n)) logprintf x
int ugendebug = 0;
SYSCTL_NODE(_hw_usb, OID_AUTO, ugen, CTLFLAG_RW, 0, "USB ugen");
SYSCTL_INT(_hw_usb_ugen, OID_AUTO, debug, CTLFLAG_RW,
&ugendebug, 0, "ugen debug level");
#else
#define DPRINTF(x)
#define DPRINTFN(n,x)
#endif
#define UGEN_CHUNK 128 /* chunk size for read */
#define UGEN_IBSIZE 1020 /* buffer size */
#define UGEN_BBSIZE 1024
#define UGEN_NISOFRAMES 500 /* 0.5 seconds worth */
#define UGEN_NISOREQS 6 /* number of outstanding xfer requests */
#define UGEN_NISORFRMS 4 /* number of frames (miliseconds) per req */
struct ugen_endpoint {
struct ugen_softc *sc;
#if defined(__FreeBSD__)
struct cdev *dev;
#endif
usb_endpoint_descriptor_t *edesc;
usbd_interface_handle iface;
int state;
#define UGEN_ASLP 0x02 /* waiting for data */
#define UGEN_SHORT_OK 0x04 /* short xfers are OK */
usbd_pipe_handle pipeh;
struct clist q;
struct selinfo rsel;
u_char *ibuf; /* start of buffer (circular for isoc) */
u_char *fill; /* location for input (isoc) */
u_char *limit; /* end of circular buffer (isoc) */
u_char *cur; /* current read location (isoc) */
u_int32_t timeout;
struct isoreq {
struct ugen_endpoint *sce;
usbd_xfer_handle xfer;
void *dmabuf;
u_int16_t sizes[UGEN_NISORFRMS];
} isoreqs[UGEN_NISOREQS];
};
struct ugen_softc {
USBBASEDEVICE sc_dev; /* base device */
usbd_device_handle sc_udev;
#if defined(__FreeBSD__)
struct cdev *dev;
#endif
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
char sc_is_open[USB_MAX_ENDPOINTS];
struct ugen_endpoint sc_endpoints[USB_MAX_ENDPOINTS][2];
#define OUT 0
#define IN 1
#ifdef __FreeBSD__
#define UGEN_DEV_REF(dev, sc) \
if ((sc)->sc_dying || dev_refthread(dev) == NULL) \
return (ENXIO)
#define UGEN_DEV_RELE(dev, sc) \
dev_relthread(dev)
#define UGEN_DEV_OPEN(dev, sc) \
/* handled by dev layer */
#define UGEN_DEV_CLOSE(dev, sc) \
/* handled by dev layer */
#else
int sc_refcnt;
#define UGEN_DEV_REF(dev, sc) \
if ((sc)->sc_dying) \
return (ENXIO); \
(sc)->sc_refcnt++
#define UGEN_DEV_RELE(dev, sc) \
if (--(sc)->sc_refcnt < 0) \
usb_detach_wakeup(USBDEV((sc)->sc_dev))
#define UGEN_DEV_OPEN(dev, sc) \
(sc)->sc_refcnt++
#define UGEN_DEV_CLOSE(dev, sc) \
UGEN_DEV_RELE(dev, sc)
#endif
u_char sc_dying;
};
#if defined(__NetBSD__) || defined(__OpenBSD__)
cdev_decl(ugen);
1999-01-21 22:56:10 +00:00
#elif defined(__FreeBSD__)
d_open_t ugenopen;
d_close_t ugenclose;
d_read_t ugenread;
d_write_t ugenwrite;
d_ioctl_t ugenioctl;
d_poll_t ugenpoll;
d_purge_t ugenpurge;
1999-01-21 22:56:10 +00:00
Static struct cdevsw ugenctl_cdevsw = {
.d_version = D_VERSION,
.d_flags = D_NEEDGIANT,
.d_open = ugenopen,
.d_close = ugenclose,
.d_ioctl = ugenioctl,
.d_purge = ugenpurge,
.d_name = "ugenctl",
#if __FreeBSD_version < 500014
.d_bmaj -1
#endif
};
1999-01-21 22:56:10 +00:00
Static struct cdevsw ugen_cdevsw = {
.d_version = D_VERSION,
.d_flags = D_NEEDGIANT,
.d_open = ugenopen,
.d_close = ugenclose,
.d_read = ugenread,
.d_write = ugenwrite,
.d_ioctl = ugenioctl,
.d_poll = ugenpoll,
.d_purge = ugenpurge,
.d_name = "ugen",
#if __FreeBSD_version < 500014
.d_bmaj -1
#endif
1999-01-21 22:56:10 +00:00
};
#endif
Static void ugenintr(usbd_xfer_handle xfer, usbd_private_handle addr,
usbd_status status);
Static void ugen_isoc_rintr(usbd_xfer_handle xfer, usbd_private_handle addr,
usbd_status status);
Static int ugen_do_read(struct ugen_softc *, int, struct uio *, int);
Static int ugen_do_write(struct ugen_softc *, int, struct uio *, int);
Static int ugen_do_ioctl(struct ugen_softc *, int, u_long,
caddr_t, int, usb_proc_ptr);
#if defined(__FreeBSD__)
Static void ugen_make_devnodes(struct ugen_softc *sc);
Static void ugen_destroy_devnodes(struct ugen_softc *sc);
#endif
Static int ugen_set_config(struct ugen_softc *sc, int configno);
Static usb_config_descriptor_t *ugen_get_cdesc(struct ugen_softc *sc,
int index, int *lenp);
Static usbd_status ugen_set_interface(struct ugen_softc *, int, int);
Static int ugen_get_alt_index(struct ugen_softc *sc, int ifaceidx);
#define UGENUNIT(n) ((minor(n) >> 4) & 0xf)
#define UGENENDPOINT(n) (minor(n) & 0xf)
#define UGENMINOR(u, e) (((u) << 4) | (e))
USB_DECLARE_DRIVER(ugen);
USB_MATCH(ugen)
{
USB_MATCH_START(ugen, uaa);
#if 0
if (uaa->matchlvl)
return (uaa->matchlvl);
#endif
if (uaa->usegeneric)
return (UMATCH_GENERIC);
else
return (UMATCH_NONE);
}
USB_ATTACH(ugen)
{
USB_ATTACH_START(ugen, sc, uaa);
usbd_device_handle udev;
char devinfo[1024];
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
usbd_status err;
int conf;
usbd_devinfo(uaa->device, 0, devinfo);
USB_ATTACH_SETUP;
sc->sc_udev = udev = uaa->device;
memset(sc->sc_endpoints, 0, sizeof sc->sc_endpoints);
/* First set configuration index 0, the default one for ugen. */
err = usbd_set_config_index(udev, 0, 0);
if (err) {
printf("%s: setting configuration index 0 failed\n",
USBDEVNAME(sc->sc_dev));
sc->sc_dying = 1;
USB_ATTACH_ERROR_RETURN;
}
conf = usbd_get_config_descriptor(udev)->bConfigurationValue;
/* Set up all the local state for this configuration. */
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
err = ugen_set_config(sc, conf);
if (err) {
printf("%s: setting configuration %d failed\n",
USBDEVNAME(sc->sc_dev), conf);
sc->sc_dying = 1;
USB_ATTACH_ERROR_RETURN;
}
#if defined(__FreeBSD__)
/* the main device, ctrl endpoint */
sc->dev = make_dev(&ugenctl_cdevsw,
UGENMINOR(USBDEVUNIT(sc->sc_dev), 0), UID_ROOT, GID_OPERATOR, 0644,
"%s", USBDEVNAME(sc->sc_dev));
ugen_make_devnodes(sc);
#endif
USB_ATTACH_SUCCESS_RETURN;
}
#if defined(__FreeBSD__)
Static void
ugen_make_devnodes(struct ugen_softc *sc)
{
int endptno;
struct cdev *dev;
for (endptno = 1; endptno < USB_MAX_ENDPOINTS; endptno++) {
if (sc->sc_endpoints[endptno][IN].sc != NULL ||
sc->sc_endpoints[endptno][OUT].sc != NULL ) {
/* endpt can be 0x81 and 0x01, representing
* endpoint address 0x01 and IN/OUT directions.
* We map both endpts to the same device,
* IN is reading from it, OUT is writing to it.
*
* In the if clause above we check whether one
* of the structs is populated.
*/
2003-10-01 14:49:53 +00:00
dev = make_dev(&ugen_cdevsw,
UGENMINOR(USBDEVUNIT(sc->sc_dev), endptno),
UID_ROOT, GID_OPERATOR, 0644,
"%s.%d",
USBDEVNAME(sc->sc_dev), endptno);
dev_depends(sc->dev, dev);
if (sc->sc_endpoints[endptno][IN].sc != NULL)
sc->sc_endpoints[endptno][IN].dev = dev;
if (sc->sc_endpoints[endptno][OUT].sc != NULL)
sc->sc_endpoints[endptno][OUT].dev = dev;
}
}
}
Static void
ugen_destroy_devnodes(struct ugen_softc *sc)
{
int endptno;
struct cdev *dev;
/* destroy all devices for the other (existing) endpoints as well */
for (endptno = 1; endptno < USB_MAX_ENDPOINTS; endptno++) {
if (sc->sc_endpoints[endptno][IN].sc != NULL ||
sc->sc_endpoints[endptno][OUT].sc != NULL ) {
/* endpt can be 0x81 and 0x01, representing
* endpoint address 0x01 and IN/OUT directions.
* We map both endpoint addresses to the same device,
* IN is reading from it, OUT is writing to it.
*
* In the if clause above we check whether one
* of the structs is populated.
*/
if (sc->sc_endpoints[endptno][IN].sc != NULL)
dev = sc->sc_endpoints[endptno][IN].dev;
else
dev = sc->sc_endpoints[endptno][OUT].dev;
destroy_dev(dev);
}
}
}
#endif
Static int
ugen_set_config(struct ugen_softc *sc, int configno)
{
usbd_device_handle dev = sc->sc_udev;
usbd_interface_handle iface;
usb_endpoint_descriptor_t *ed;
struct ugen_endpoint *sce, **sce_cache, ***sce_cache_arr;
u_int8_t niface, niface_cache, nendpt, *nendpt_cache;
int ifaceno, endptno, endpt;
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
usbd_status err;
int dir;
DPRINTFN(1,("ugen_set_config: %s to configno %d, sc=%p\n",
USBDEVNAME(sc->sc_dev), configno, sc));
/* We start at 1, not 0, because we don't care whether the
* control endpoint is open or not. It is always present.
*/
for (endptno = 1; endptno < USB_MAX_ENDPOINTS; endptno++)
if (sc->sc_is_open[endptno]) {
DPRINTFN(1,
("ugen_set_config: %s - endpoint %d is open\n",
USBDEVNAME(sc->sc_dev), endptno));
return (USBD_IN_USE);
}
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
err = usbd_interface_count(dev, &niface);
if (err)
return (err);
/* store an array of endpoint descriptors to clear if the configuration
* change succeeds - these aren't available afterwards */
nendpt_cache = malloc(sizeof(u_int8_t) * niface, M_TEMP, M_WAITOK);
sce_cache_arr = malloc(sizeof(struct ugen_endpoint **) * niface, M_TEMP,
M_WAITOK);
niface_cache = niface;
for (ifaceno = 0; ifaceno < niface; ifaceno++) {
DPRINTFN(1,("ugen_set_config: ifaceno %d\n", ifaceno));
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
err = usbd_device2interface_handle(dev, ifaceno, &iface);
if (err)
panic("ugen_set_config: can't obtain interface handle");
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
err = usbd_endpoint_count(iface, &nendpt);
if (err)
panic("ugen_set_config: endpoint count failed");
/* store endpoint descriptors for each interface */
nendpt_cache[ifaceno] = nendpt;
sce_cache = malloc(sizeof(struct ugen_endpoint *) * nendpt, M_TEMP,
M_WAITOK);
sce_cache_arr[ifaceno] = sce_cache;
for (endptno = 0; endptno < nendpt; endptno++) {
ed = usbd_interface2endpoint_descriptor(iface,endptno);
endpt = ed->bEndpointAddress;
dir = UE_GET_DIR(endpt) == UE_DIR_IN ? IN : OUT;
sce_cache[endptno] = &sc->sc_endpoints[UE_GET_ADDR(endpt)][dir];
}
}
/* Avoid setting the current value. */
if (usbd_get_config_descriptor(dev)->bConfigurationValue != configno) {
/* attempt to perform the configuration change */
err = usbd_set_config_no(dev, configno, 1);
if (err) {
for(ifaceno = 0; ifaceno < niface_cache; ifaceno++)
free(sce_cache_arr[ifaceno], M_TEMP);
free(sce_cache_arr, M_TEMP);
free(nendpt_cache, M_TEMP);
return (err);
}
}
#if defined(__FreeBSD__)
ugen_destroy_devnodes(sc);
#endif
/* now we can clear the old interface's ugen_endpoints */
for(ifaceno = 0; ifaceno < niface_cache; ifaceno++) {
sce_cache = sce_cache_arr[ifaceno];
for(endptno = 0; endptno < nendpt_cache[ifaceno]; endptno++) {
sce = sce_cache[endptno];
sce->sc = 0;
sce->edesc = 0;
sce->iface = 0;
}
}
/* and free the cache storing them */
for(ifaceno = 0; ifaceno < niface_cache; ifaceno++)
free(sce_cache_arr[ifaceno], M_TEMP);
free(sce_cache_arr, M_TEMP);
free(nendpt_cache, M_TEMP);
/* no endpoints if the device is in the unconfigured state */
if (configno != USB_UNCONFIG_NO)
{
/* set the new configuration's ugen_endpoints */
err = usbd_interface_count(dev, &niface);
if (err)
panic("ugen_set_config: interface count failed");
memset(sc->sc_endpoints, 0, sizeof sc->sc_endpoints);
for (ifaceno = 0; ifaceno < niface; ifaceno++) {
DPRINTFN(1,("ugen_set_config: ifaceno %d\n", ifaceno));
err = usbd_device2interface_handle(dev, ifaceno, &iface);
if (err)
panic("ugen_set_config: can't obtain interface handle");
err = usbd_endpoint_count(iface, &nendpt);
if (err)
panic("ugen_set_config: endpoint count failed");
for (endptno = 0; endptno < nendpt; endptno++) {
ed = usbd_interface2endpoint_descriptor(iface,endptno);
endpt = ed->bEndpointAddress;
dir = UE_GET_DIR(endpt) == UE_DIR_IN ? IN : OUT;
sce = &sc->sc_endpoints[UE_GET_ADDR(endpt)][dir];
DPRINTFN(1,("ugen_set_config: endptno %d, endpt=0x%02x"
"(%d,%d), sce=%p\n",
endptno, endpt, UE_GET_ADDR(endpt),
UE_GET_DIR(endpt), sce));
sce->sc = sc;
sce->edesc = ed;
sce->iface = iface;
}
}
}
return (USBD_NORMAL_COMPLETION);
}
int
ugenopen(struct cdev *dev, int flag, int mode, usb_proc_ptr p)
{
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
struct ugen_softc *sc;
int unit = UGENUNIT(dev);
int endpt = UGENENDPOINT(dev);
usb_endpoint_descriptor_t *edesc;
struct ugen_endpoint *sce;
int dir, isize;
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
usbd_status err;
usbd_xfer_handle xfer;
void *buf;
int i, j;
USB_GET_SC_OPEN(ugen, unit, sc);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
DPRINTFN(5, ("ugenopen: flag=%d, mode=%d, unit=%d endpt=%d\n",
flag, mode, unit, endpt));
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
if (sc == NULL || sc->sc_dying)
return (ENXIO);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
if (sc->sc_is_open[endpt])
return (EBUSY);
if (endpt == USB_CONTROL_ENDPOINT) {
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
sc->sc_is_open[USB_CONTROL_ENDPOINT] = 1;
UGEN_DEV_OPEN(dev, sc);
return (0);
}
/* Make sure there are pipes for all directions. */
for (dir = OUT; dir <= IN; dir++) {
if (flag & (dir == OUT ? FWRITE : FREAD)) {
sce = &sc->sc_endpoints[endpt][dir];
if (sce->edesc == 0)
return (ENXIO);
}
}
/* Actually open the pipes. */
/* XXX Should back out properly if it fails. */
for (dir = OUT; dir <= IN; dir++) {
if (!(flag & (dir == OUT ? FWRITE : FREAD)))
continue;
sce = &sc->sc_endpoints[endpt][dir];
sce->state = 0;
sce->timeout = USBD_NO_TIMEOUT;
DPRINTFN(5, ("ugenopen: sc=%p, endpt=%d, dir=%d, sce=%p\n",
sc, endpt, dir, sce));
edesc = sce->edesc;
switch (edesc->bmAttributes & UE_XFERTYPE) {
case UE_INTERRUPT:
if (dir == OUT) {
err = usbd_open_pipe(sce->iface,
edesc->bEndpointAddress, 0, &sce->pipeh);
if (err)
return (EIO);
break;
}
isize = UGETW(edesc->wMaxPacketSize);
if (isize == 0) /* shouldn't happen */
return (EINVAL);
sce->ibuf = malloc(isize, M_USBDEV, M_WAITOK);
DPRINTFN(5, ("ugenopen: intr endpt=%d,isize=%d\n",
endpt, isize));
1999-11-28 21:07:11 +00:00
if (clalloc(&sce->q, UGEN_IBSIZE, 0) == -1)
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
return (ENOMEM);
err = usbd_open_pipe_intr(sce->iface,
edesc->bEndpointAddress,
USBD_SHORT_XFER_OK, &sce->pipeh, sce,
sce->ibuf, isize, ugenintr,
USBD_DEFAULT_INTERVAL);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
if (err) {
free(sce->ibuf, M_USBDEV);
clfree(&sce->q);
return (EIO);
}
DPRINTFN(5, ("ugenopen: interrupt open done\n"));
break;
case UE_BULK:
err = usbd_open_pipe(sce->iface,
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
edesc->bEndpointAddress, 0, &sce->pipeh);
if (err)
return (EIO);
break;
case UE_ISOCHRONOUS:
if (dir == OUT)
return (EINVAL);
isize = UGETW(edesc->wMaxPacketSize);
if (isize == 0) /* shouldn't happen */
return (EINVAL);
sce->ibuf = malloc(isize * UGEN_NISOFRAMES,
M_USBDEV, M_WAITOK);
sce->cur = sce->fill = sce->ibuf;
sce->limit = sce->ibuf + isize * UGEN_NISOFRAMES;
DPRINTFN(5, ("ugenopen: isoc endpt=%d, isize=%d\n",
endpt, isize));
err = usbd_open_pipe(sce->iface,
edesc->bEndpointAddress, 0, &sce->pipeh);
if (err) {
free(sce->ibuf, M_USBDEV);
return (EIO);
}
for(i = 0; i < UGEN_NISOREQS; ++i) {
sce->isoreqs[i].sce = sce;
xfer = usbd_alloc_xfer(sc->sc_udev);
if (xfer == 0)
goto bad;
sce->isoreqs[i].xfer = xfer;
buf = usbd_alloc_buffer
(xfer, isize * UGEN_NISORFRMS);
if (buf == 0) {
i++;
goto bad;
}
sce->isoreqs[i].dmabuf = buf;
for(j = 0; j < UGEN_NISORFRMS; ++j)
sce->isoreqs[i].sizes[j] = isize;
usbd_setup_isoc_xfer
(xfer, sce->pipeh, &sce->isoreqs[i],
sce->isoreqs[i].sizes,
UGEN_NISORFRMS, USBD_NO_COPY,
ugen_isoc_rintr);
(void)usbd_transfer(xfer);
}
DPRINTFN(5, ("ugenopen: isoc open done\n"));
break;
bad:
while (--i >= 0) /* implicit buffer free */
usbd_free_xfer(sce->isoreqs[i].xfer);
return (ENOMEM);
case UE_CONTROL:
sce->timeout = USBD_DEFAULT_TIMEOUT;
return (EINVAL);
}
}
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
sc->sc_is_open[endpt] = 1;
UGEN_DEV_OPEN(dev, sc);
return (0);
}
int
ugenclose(struct cdev *dev, int flag, int mode, usb_proc_ptr p)
{
int endpt = UGENENDPOINT(dev);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
struct ugen_softc *sc;
struct ugen_endpoint *sce;
int dir;
int i;
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
USB_GET_SC(ugen, UGENUNIT(dev), sc);
DPRINTFN(5, ("ugenclose: flag=%d, mode=%d, unit=%d, endpt=%d\n",
flag, mode, UGENUNIT(dev), endpt));
#ifdef DIAGNOSTIC
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
if (!sc->sc_is_open[endpt]) {
printf("ugenclose: not open\n");
return (EINVAL);
}
#endif
if (endpt == USB_CONTROL_ENDPOINT) {
DPRINTFN(5, ("ugenclose: close control\n"));
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
sc->sc_is_open[endpt] = 0;
UGEN_DEV_CLOSE(dev, sc);
return (0);
}
for (dir = OUT; dir <= IN; dir++) {
if (!(flag & (dir == OUT ? FWRITE : FREAD)))
continue;
sce = &sc->sc_endpoints[endpt][dir];
if (sce->pipeh == NULL)
continue;
DPRINTFN(5, ("ugenclose: endpt=%d dir=%d sce=%p\n",
endpt, dir, sce));
usbd_abort_pipe(sce->pipeh);
usbd_close_pipe(sce->pipeh);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
sce->pipeh = NULL;
switch (sce->edesc->bmAttributes & UE_XFERTYPE) {
case UE_INTERRUPT:
ndflush(&sce->q, sce->q.c_cc);
clfree(&sce->q);
break;
case UE_ISOCHRONOUS:
for (i = 0; i < UGEN_NISOREQS; ++i)
usbd_free_xfer(sce->isoreqs[i].xfer);
default:
break;
}
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
if (sce->ibuf != NULL) {
free(sce->ibuf, M_USBDEV);
sce->ibuf = NULL;
clfree(&sce->q);
}
}
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
sc->sc_is_open[endpt] = 0;
UGEN_DEV_CLOSE(dev, sc);
return (0);
}
Static int
ugen_do_read(struct ugen_softc *sc, int endpt, struct uio *uio, int flag)
{
struct ugen_endpoint *sce = &sc->sc_endpoints[endpt][IN];
u_int32_t n, tn;
Back out rev.1.91 which implemented bulk read transfers in ugen(4) as asynchronous. I realize that this means the custom application will not work as written, but it is not okay to break most users of ugen(4). The major problem is that a bulk read transfer is not an interrupt saying that X bytes are available -- it is a request to be able to receive up to X bytes, with T timeout, and S short-transfer-okayness. The timeout is a software mechanism that ugen(4) provides and cannot be implemented using asynchronous reads -- the timeout must start at the time a read is done. The status of up to how many bytes can be received in this transfer and whether a short transfer returns data or error is also encoded at least in ohci(4)'s requests to the controller. Trying to detect the "maximum width" results in using a single buffer of far too small when an application requests a large read. Even if you combat this by replacing all buffers again with the maximal sized read buffer (1kb) that ugen(4) would allow you to use before, you don't get the right semantics -- you have to throw data away or make all the timeouts invalid or make the short-transfer settings invalid. There is no way to do this right without extending the ugen(4) API much further -- it breaks the USB camera interfaces used because they need a chain of many maximal-width transfers, for example, and it makes cross-platform support for all the BSDs gratuitously hard. Instead of trying to do select(2) on a bulk read pipe -- which has neither the information on desired transfer length nor ability to implement timeout -- an application can simply use a kernel thread and pipe to turn that endpoint into something poll-able. It is unfortunate that bulk endpoints cannot provide the same semantics that interrupt and isochronous endpoints can, but it is possible to just use ioctl(USB_GET_ENDPOINT_DESC) to find out when different semantics must be used without preventing the normal users of the ugen(4) device from working.
2004-10-13 04:12:20 +00:00
char buf[UGEN_BBSIZE];
usbd_xfer_handle xfer;
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
usbd_status err;
int s;
int error = 0;
u_char buffer[UGEN_CHUNK];
DPRINTFN(5, ("%s: ugenread: %d\n", USBDEVNAME(sc->sc_dev), endpt));
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
if (sc->sc_dying)
return (EIO);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
if (endpt == USB_CONTROL_ENDPOINT)
return (ENODEV);
#ifdef DIAGNOSTIC
if (sce->edesc == NULL) {
printf("ugenread: no edesc\n");
return (EIO);
}
if (sce->pipeh == NULL) {
printf("ugenread: no pipe\n");
return (EIO);
}
#endif
switch (sce->edesc->bmAttributes & UE_XFERTYPE) {
case UE_INTERRUPT:
/* Block until activity occurred. */
s = splusb();
while (sce->q.c_cc == 0) {
if (flag & O_NONBLOCK) {
splx(s);
return (EWOULDBLOCK);
}
sce->state |= UGEN_ASLP;
DPRINTFN(5, ("ugenread: sleep on %p\n", sce));
error = tsleep(sce, PZERO | PCATCH, "ugenri", 0);
DPRINTFN(5, ("ugenread: woke, error=%d\n", error));
if (sc->sc_dying)
error = EIO;
if (error) {
sce->state &= ~UGEN_ASLP;
break;
}
}
splx(s);
/* Transfer as many chunks as possible. */
while (sce->q.c_cc > 0 && uio->uio_resid > 0 && !error) {
n = min(sce->q.c_cc, uio->uio_resid);
if (n > sizeof(buffer))
n = sizeof(buffer);
/* Remove a small chunk from the input queue. */
q_to_b(&sce->q, buffer, n);
DPRINTFN(5, ("ugenread: got %d chars\n", n));
/* Copy the data to the user process. */
error = uiomove(buffer, n, uio);
if (error)
break;
}
break;
case UE_BULK:
xfer = usbd_alloc_xfer(sc->sc_udev);
if (xfer == 0)
return (ENOMEM);
while ((n = min(UGEN_BBSIZE, uio->uio_resid)) != 0) {
DPRINTFN(1, ("ugenread: start transfer %d bytes\n",n));
tn = n;
err = usbd_bulk_transfer(
xfer, sce->pipeh,
sce->state & UGEN_SHORT_OK ?
USBD_SHORT_XFER_OK : 0,
sce->timeout, buf, &tn, "ugenrb");
if (err) {
if (err == USBD_INTERRUPTED)
error = EINTR;
else if (err == USBD_TIMEOUT)
error = ETIMEDOUT;
else
error = EIO;
break;
}
DPRINTFN(1, ("ugenread: got %d bytes\n", tn));
error = uiomove(buf, tn, uio);
if (error || tn < n)
break;
}
usbd_free_xfer(xfer);
break;
case UE_ISOCHRONOUS:
s = splusb();
while (sce->cur == sce->fill) {
if (flag & O_NONBLOCK) {
splx(s);
return (EWOULDBLOCK);
}
sce->state |= UGEN_ASLP;
DPRINTFN(5, ("ugenread: sleep on %p\n", sce));
error = tsleep(sce, PZERO | PCATCH, "ugenri", 0);
DPRINTFN(5, ("ugenread: woke, error=%d\n", error));
if (sc->sc_dying)
error = EIO;
if (error) {
sce->state &= ~UGEN_ASLP;
break;
}
}
while (sce->cur != sce->fill && uio->uio_resid > 0 && !error) {
if(sce->fill > sce->cur)
n = min(sce->fill - sce->cur, uio->uio_resid);
else
n = min(sce->limit - sce->cur, uio->uio_resid);
DPRINTFN(5, ("ugenread: isoc got %d chars\n", n));
/* Copy the data to the user process. */
error = uiomove(sce->cur, n, uio);
if (error)
break;
sce->cur += n;
if(sce->cur >= sce->limit)
sce->cur = sce->ibuf;
}
splx(s);
break;
default:
return (ENXIO);
}
return (error);
}
int
ugenread(struct cdev *dev, struct uio *uio, int flag)
{
int endpt = UGENENDPOINT(dev);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
struct ugen_softc *sc;
int error;
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
USB_GET_SC(ugen, UGENUNIT(dev), sc);
UGEN_DEV_REF(dev, sc);
error = ugen_do_read(sc, endpt, uio, flag);
UGEN_DEV_RELE(dev, sc);
return (error);
}
Static int
ugen_do_write(struct ugen_softc *sc, int endpt, struct uio *uio, int flag)
{
struct ugen_endpoint *sce = &sc->sc_endpoints[endpt][OUT];
u_int32_t n;
int error = 0;
char buf[UGEN_BBSIZE];
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
usbd_xfer_handle xfer;
usbd_status err;
DPRINTFN(5, ("%s: ugenwrite: %d\n", USBDEVNAME(sc->sc_dev), endpt));
if (sc->sc_dying)
return (EIO);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
if (endpt == USB_CONTROL_ENDPOINT)
return (ENODEV);
#ifdef DIAGNOSTIC
if (sce->edesc == NULL) {
printf("ugenwrite: no edesc\n");
return (EIO);
}
if (sce->pipeh == NULL) {
printf("ugenwrite: no pipe\n");
return (EIO);
}
#endif
switch (sce->edesc->bmAttributes & UE_XFERTYPE) {
case UE_BULK:
xfer = usbd_alloc_xfer(sc->sc_udev);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
if (xfer == 0)
return (EIO);
while ((n = min(UGEN_BBSIZE, uio->uio_resid)) != 0) {
error = uiomove(buf, n, uio);
if (error)
break;
DPRINTFN(1, ("ugenwrite: transfer %d bytes\n", n));
err = usbd_bulk_transfer(xfer, sce->pipeh, 0,
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
sce->timeout, buf, &n,"ugenwb");
if (err) {
if (err == USBD_INTERRUPTED)
error = EINTR;
else if (err == USBD_TIMEOUT)
error = ETIMEDOUT;
else
error = EIO;
break;
}
}
usbd_free_xfer(xfer);
break;
case UE_INTERRUPT:
xfer = usbd_alloc_xfer(sc->sc_udev);
if (xfer == 0)
return (EIO);
while ((n = min(UGETW(sce->edesc->wMaxPacketSize),
uio->uio_resid)) != 0) {
error = uiomove(buf, n, uio);
if (error)
break;
DPRINTFN(1, ("ugenwrite: transfer %d bytes\n", n));
err = usbd_intr_transfer(xfer, sce->pipeh, 0,
sce->timeout, buf, &n, "ugenwi");
if (err) {
if (err == USBD_INTERRUPTED)
error = EINTR;
else if (err == USBD_TIMEOUT)
error = ETIMEDOUT;
else
error = EIO;
break;
}
}
usbd_free_xfer(xfer);
break;
default:
return (ENXIO);
}
return (error);
}
int
ugenwrite(struct cdev *dev, struct uio *uio, int flag)
{
int endpt = UGENENDPOINT(dev);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
struct ugen_softc *sc;
int error;
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
USB_GET_SC(ugen, UGENUNIT(dev), sc);
UGEN_DEV_REF(dev, sc);
error = ugen_do_write(sc, endpt, uio, flag);
UGEN_DEV_RELE(dev, sc);
return (error);
}
#if defined(__NetBSD__) || defined(__OpenBSD__)
int
ugen_activate(device_ptr_t self, enum devact act)
{
struct ugen_softc *sc = (struct ugen_softc *)self;
switch (act) {
case DVACT_ACTIVATE:
return (EOPNOTSUPP);
case DVACT_DEACTIVATE:
sc->sc_dying = 1;
break;
}
return (0);
}
#endif
#ifdef __FreeBSD__
void
ugenpurge(struct cdev *dev)
{
int endpt = UGENENDPOINT(dev);
struct ugen_endpoint *sce;
struct ugen_softc *sc;
if (endpt == USB_CONTROL_ENDPOINT)
return;
USB_GET_SC(ugen, UGENUNIT(dev), sc);
sce = &sc->sc_endpoints[endpt][IN];
if (sce->pipeh)
usbd_abort_pipe(sce->pipeh);
}
#endif
USB_DETACH(ugen)
{
USB_DETACH_START(ugen, sc);
struct ugen_endpoint *sce;
int i, dir;
#if defined(__NetBSD__) || defined(__OpenBSD__)
int maj, mn, c, s;
#endif
#if defined(__NetBSD__) || defined(__OpenBSD__)
DPRINTF(("ugen_detach: sc=%p flags=%d\n", sc, flags));
#elif defined(__FreeBSD__)
DPRINTF(("ugen_detach: sc=%p\n", sc));
#endif
sc->sc_dying = 1;
/* Abort all pipes. Causes processes waiting for transfer to wake. */
for (i = 0; i < USB_MAX_ENDPOINTS; i++) {
for (dir = OUT; dir <= IN; dir++) {
sce = &sc->sc_endpoints[i][dir];
if (sce->pipeh)
usbd_abort_pipe(sce->pipeh);
}
}
#if defined(__NetBSD__) || defined(__OpenBSD__)
s = splusb();
if (sc->sc_refcnt > 0) {
/* Wake everyone */
for (i = 0; i < USB_MAX_ENDPOINTS; i++)
wakeup(&sc->sc_endpoints[i][IN]);
/* Wait for processes to go away. */
while (sc->sc_refcnt > 0)
usb_detach_wait(USBDEV(sc->sc_dev));
}
splx(s);
/* Wait for opens to go away. */
do {
c = 0;
for (i = 0; i < USB_MAX_ENDPOINTS; i++) {
if (sc->sc_is_open[i])
c++;
}
if (c != 0)
tsleep(&sc->sc_dying, PZERO, "ugendr", hz);
} while (c != 0);
/* locate the major number */
for (maj = 0; maj < nchrdev; maj++)
if (cdevsw[maj].d_open == ugenopen)
break;
/* Nuke the vnodes for any open instances (calls close). */
mn = self->dv_unit * USB_MAX_ENDPOINTS;
vdevgone(maj, mn, mn + USB_MAX_ENDPOINTS - 1, VCHR);
#elif defined(__FreeBSD__)
/* destroy the device for the control endpoint */
destroy_dev(sc->dev);
#endif
return (0);
}
Static void
ugenintr(usbd_xfer_handle xfer, usbd_private_handle addr, usbd_status status)
{
struct ugen_endpoint *sce = addr;
/*struct ugen_softc *sc = sce->sc;*/
u_int32_t count;
u_char *ibuf;
if (status == USBD_CANCELLED)
return;
if (status != USBD_NORMAL_COMPLETION) {
DPRINTF(("ugenintr: status=%d\n", status));
if (status == USBD_STALLED)
usbd_clear_endpoint_stall_async(sce->pipeh);
return;
}
usbd_get_xfer_status(xfer, NULL, NULL, &count, NULL);
ibuf = sce->ibuf;
DPRINTFN(5, ("ugenintr: xfer=%p status=%d count=%d\n",
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
xfer, status, count));
DPRINTFN(5, (" data = %02x %02x %02x\n",
ibuf[0], ibuf[1], ibuf[2]));
(void)b_to_q(ibuf, count, &sce->q);
if (sce->state & UGEN_ASLP) {
sce->state &= ~UGEN_ASLP;
DPRINTFN(5, ("ugen_intr: waking %p\n", sce));
wakeup(sce);
}
selwakeuppri(&sce->rsel, PZERO);
}
Static void
ugen_isoc_rintr(usbd_xfer_handle xfer, usbd_private_handle addr,
usbd_status status)
{
struct isoreq *req = addr;
struct ugen_endpoint *sce = req->sce;
u_int32_t count, n;
int i, isize;
/* Return if we are aborting. */
if (status == USBD_CANCELLED)
return;
usbd_get_xfer_status(xfer, NULL, NULL, &count, NULL);
DPRINTFN(5,("ugen_isoc_rintr: xfer %d, count=%d\n",
(int)(req - sce->isoreqs),
count));
/* throw away oldest input if the buffer is full */
if(sce->fill < sce->cur && sce->cur <= sce->fill + count) {
sce->cur += count;
if(sce->cur >= sce->limit)
sce->cur = sce->ibuf + (sce->limit - sce->cur);
DPRINTFN(5, ("ugen_isoc_rintr: throwing away %d bytes\n",
count));
}
isize = UGETW(sce->edesc->wMaxPacketSize);
for (i = 0; i < UGEN_NISORFRMS; i++) {
u_int32_t actlen = req->sizes[i];
char const *buf = (char const *)req->dmabuf + isize * i;
/* copy data to buffer */
while (actlen > 0) {
n = min(actlen, sce->limit - sce->fill);
memcpy(sce->fill, buf, n);
buf += n;
actlen -= n;
sce->fill += n;
if(sce->fill == sce->limit)
sce->fill = sce->ibuf;
}
/* setup size for next transfer */
req->sizes[i] = isize;
}
usbd_setup_isoc_xfer(xfer, sce->pipeh, req, req->sizes, UGEN_NISORFRMS,
USBD_NO_COPY, ugen_isoc_rintr);
(void)usbd_transfer(xfer);
if (sce->state & UGEN_ASLP) {
sce->state &= ~UGEN_ASLP;
DPRINTFN(5, ("ugen_isoc_rintr: waking %p\n", sce));
wakeup(sce);
}
selwakeuppri(&sce->rsel, PZERO);
}
Static usbd_status
ugen_set_interface(struct ugen_softc *sc, int ifaceidx, int altno)
{
usbd_interface_handle iface;
usb_endpoint_descriptor_t *ed;
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
usbd_status err;
struct ugen_endpoint *sce, **sce_cache;
u_int8_t niface, nendpt, nendpt_cache, endptno, endpt;
int dir;
DPRINTFN(15, ("ugen_set_interface %d %d\n", ifaceidx, altno));
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
err = usbd_interface_count(sc->sc_udev, &niface);
if (err)
return (err);
if (ifaceidx < 0 || ifaceidx >= niface)
return (USBD_INVAL);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
err = usbd_device2interface_handle(sc->sc_udev, ifaceidx, &iface);
if (err)
return (err);
err = usbd_endpoint_count(iface, &nendpt);
if (err)
return (err);
/* store an array of endpoint descriptors to clear if the interface
* change succeeds - these aren't available afterwards */
sce_cache = malloc(sizeof(struct ugen_endpoint *) * nendpt, M_TEMP,
M_WAITOK);
nendpt_cache = nendpt;
for (endptno = 0; endptno < nendpt; endptno++) {
ed = usbd_interface2endpoint_descriptor(iface,endptno);
endpt = ed->bEndpointAddress;
dir = UE_GET_DIR(endpt) == UE_DIR_IN ? IN : OUT;
sce_cache[endptno] = &sc->sc_endpoints[UE_GET_ADDR(endpt)][dir];
}
/* change setting */
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
err = usbd_set_interface(iface, altno);
if (err) {
free(sce_cache, M_TEMP);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
return (err);
}
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
err = usbd_endpoint_count(iface, &nendpt);
if (err)
panic("ugen_set_interface: endpoint count failed");
#if defined(__FreeBSD__)
/* destroy the existing devices, we remake the new ones in a moment */
ugen_destroy_devnodes(sc);
#endif
/* now we can clear the old interface's ugen_endpoints */
for (endptno = 0; endptno < nendpt_cache; endptno++) {
sce = sce_cache[endptno];
sce->sc = 0;
sce->edesc = 0;
sce->iface = 0;
}
free(sce_cache, M_TEMP);
/* set the new interface's ugen_endpoints */
for (endptno = 0; endptno < nendpt; endptno++) {
ed = usbd_interface2endpoint_descriptor(iface,endptno);
endpt = ed->bEndpointAddress;
dir = UE_GET_DIR(endpt) == UE_DIR_IN ? IN : OUT;
sce = &sc->sc_endpoints[UE_GET_ADDR(endpt)][dir];
sce->sc = sc;
sce->edesc = ed;
sce->iface = iface;
}
#if defined(__FreeBSD__)
/* make the new devices */
ugen_make_devnodes(sc);
#endif
return (0);
}
/* Retrieve a complete descriptor for a certain device and index. */
Static usb_config_descriptor_t *
ugen_get_cdesc(struct ugen_softc *sc, int index, int *lenp)
{
usb_config_descriptor_t *cdesc, *tdesc, cdescr;
int len;
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
usbd_status err;
if (index == USB_CURRENT_CONFIG_INDEX) {
tdesc = usbd_get_config_descriptor(sc->sc_udev);
len = UGETW(tdesc->wTotalLength);
if (lenp)
*lenp = len;
cdesc = malloc(len, M_TEMP, M_WAITOK);
memcpy(cdesc, tdesc, len);
DPRINTFN(5,("ugen_get_cdesc: current, len=%d\n", len));
} else {
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
err = usbd_get_config_desc(sc->sc_udev, index, &cdescr);
if (err)
return (0);
len = UGETW(cdescr.wTotalLength);
DPRINTFN(5,("ugen_get_cdesc: index=%d, len=%d\n", index, len));
if (lenp)
*lenp = len;
cdesc = malloc(len, M_TEMP, M_WAITOK);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
err = usbd_get_config_desc_full(sc->sc_udev, index, cdesc, len);
if (err) {
free(cdesc, M_TEMP);
return (0);
}
}
return (cdesc);
}
Static int
ugen_get_alt_index(struct ugen_softc *sc, int ifaceidx)
{
usbd_interface_handle iface;
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
usbd_status err;
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
err = usbd_device2interface_handle(sc->sc_udev, ifaceidx, &iface);
if (err)
return (-1);
return (usbd_get_interface_altindex(iface));
}
Static int
ugen_do_ioctl(struct ugen_softc *sc, int endpt, u_long cmd,
caddr_t addr, int flag, usb_proc_ptr p)
{
struct ugen_endpoint *sce;
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
usbd_status err;
usbd_interface_handle iface;
struct usb_config_desc *cd;
usb_config_descriptor_t *cdesc;
struct usb_interface_desc *id;
usb_interface_descriptor_t *idesc;
struct usb_endpoint_desc *ed;
usb_endpoint_descriptor_t *edesc;
struct usb_alt_interface *ai;
struct usb_string_desc *si;
u_int8_t conf, alt;
DPRINTFN(5, ("ugenioctl: cmd=%08lx\n", cmd));
if (sc->sc_dying)
return (EIO);
switch (cmd) {
case FIONBIO:
case FIOASYNC:
/* All handled in the upper FS layer. */
return (0);
case USB_SET_SHORT_XFER:
if (endpt == USB_CONTROL_ENDPOINT)
return (EINVAL);
/* This flag only affects read */
sce = &sc->sc_endpoints[endpt][IN];
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
if (sce->pipeh == NULL) {
printf("ugenioctl: USB_SET_SHORT_XFER, no pipe\n");
return (EIO);
}
if (*(int *)addr)
sce->state |= UGEN_SHORT_OK;
else
sce->state &= ~UGEN_SHORT_OK;
return (0);
case USB_SET_TIMEOUT:
sce = &sc->sc_endpoints[endpt][IN];
sce->timeout = *(int *)addr;
return (0);
default:
break;
}
if (endpt != USB_CONTROL_ENDPOINT)
return (EINVAL);
switch (cmd) {
#ifdef USB_DEBUG
case USB_SETDEBUG:
ugendebug = *(int *)addr;
break;
#endif
case USB_GET_CONFIG:
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
err = usbd_get_config(sc->sc_udev, &conf);
if (err)
return (EIO);
*(int *)addr = conf;
break;
case USB_SET_CONFIG:
if (!(flag & FWRITE))
return (EPERM);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
err = ugen_set_config(sc, *(int *)addr);
switch (err) {
case USBD_NORMAL_COMPLETION:
#if defined(__FreeBSD__)
ugen_make_devnodes(sc);
#endif
break;
case USBD_IN_USE:
return (EBUSY);
default:
return (EIO);
}
break;
case USB_GET_ALTINTERFACE:
ai = (struct usb_alt_interface *)addr;
err = usbd_device2interface_handle(sc->sc_udev,
ai->uai_interface_index, &iface);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
if (err)
return (EINVAL);
idesc = usbd_get_interface_descriptor(iface);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
if (idesc == NULL)
return (EIO);
ai->uai_alt_no = idesc->bAlternateSetting;
break;
case USB_SET_ALTINTERFACE:
if (!(flag & FWRITE))
return (EPERM);
ai = (struct usb_alt_interface *)addr;
err = usbd_device2interface_handle(sc->sc_udev,
ai->uai_interface_index, &iface);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
if (err)
return (EINVAL);
err = ugen_set_interface(sc, ai->uai_interface_index,
ai->uai_alt_no);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
if (err)
return (EINVAL);
break;
case USB_GET_NO_ALT:
ai = (struct usb_alt_interface *)addr;
cdesc = ugen_get_cdesc(sc, ai->uai_config_index, 0);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
if (cdesc == NULL)
return (EINVAL);
idesc = usbd_find_idesc(cdesc, ai->uai_interface_index, 0);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
if (idesc == NULL) {
free(cdesc, M_TEMP);
return (EINVAL);
}
ai->uai_alt_no = usbd_get_no_alts(cdesc,
idesc->bInterfaceNumber);
free(cdesc, M_TEMP);
break;
case USB_GET_DEVICE_DESC:
*(usb_device_descriptor_t *)addr =
*usbd_get_device_descriptor(sc->sc_udev);
break;
case USB_GET_CONFIG_DESC:
cd = (struct usb_config_desc *)addr;
cdesc = ugen_get_cdesc(sc, cd->ucd_config_index, 0);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
if (cdesc == NULL)
return (EINVAL);
cd->ucd_desc = *cdesc;
free(cdesc, M_TEMP);
break;
case USB_GET_INTERFACE_DESC:
id = (struct usb_interface_desc *)addr;
cdesc = ugen_get_cdesc(sc, id->uid_config_index, 0);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
if (cdesc == NULL)
return (EINVAL);
if (id->uid_config_index == USB_CURRENT_CONFIG_INDEX &&
id->uid_alt_index == USB_CURRENT_ALT_INDEX)
alt = ugen_get_alt_index(sc, id->uid_interface_index);
else
alt = id->uid_alt_index;
idesc = usbd_find_idesc(cdesc, id->uid_interface_index, alt);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
if (idesc == NULL) {
free(cdesc, M_TEMP);
return (EINVAL);
}
id->uid_desc = *idesc;
free(cdesc, M_TEMP);
break;
case USB_GET_ENDPOINT_DESC:
ed = (struct usb_endpoint_desc *)addr;
cdesc = ugen_get_cdesc(sc, ed->ued_config_index, 0);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
if (cdesc == NULL)
return (EINVAL);
if (ed->ued_config_index == USB_CURRENT_CONFIG_INDEX &&
ed->ued_alt_index == USB_CURRENT_ALT_INDEX)
alt = ugen_get_alt_index(sc, ed->ued_interface_index);
else
alt = ed->ued_alt_index;
edesc = usbd_find_edesc(cdesc, ed->ued_interface_index,
alt, ed->ued_endpoint_index);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
if (edesc == NULL) {
free(cdesc, M_TEMP);
return (EINVAL);
}
ed->ued_desc = *edesc;
free(cdesc, M_TEMP);
break;
case USB_GET_FULL_DESC:
{
int len;
struct iovec iov;
struct uio uio;
struct usb_full_desc *fd = (struct usb_full_desc *)addr;
int error;
cdesc = ugen_get_cdesc(sc, fd->ufd_config_index, &len);
if (len > fd->ufd_size)
len = fd->ufd_size;
iov.iov_base = (caddr_t)fd->ufd_data;
iov.iov_len = len;
uio.uio_iov = &iov;
uio.uio_iovcnt = 1;
uio.uio_resid = len;
uio.uio_offset = 0;
uio.uio_segflg = UIO_USERSPACE;
uio.uio_rw = UIO_READ;
uio.uio_procp = p;
error = uiomove((void *)cdesc, len, &uio);
free(cdesc, M_TEMP);
return (error);
}
case USB_GET_STRING_DESC: {
int len;
si = (struct usb_string_desc *)addr;
err = usbd_get_string_desc(sc->sc_udev, si->usd_string_index,
si->usd_language_id, &si->usd_desc, &len);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
if (err)
return (EINVAL);
break;
}
case USB_DO_REQUEST:
{
struct usb_ctl_request *ur = (void *)addr;
int len = UGETW(ur->ucr_request.wLength);
struct iovec iov;
struct uio uio;
void *ptr = 0;
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
usbd_status err;
int error = 0;
if (!(flag & FWRITE))
return (EPERM);
/* Avoid requests that would damage the bus integrity. */
if ((ur->ucr_request.bmRequestType == UT_WRITE_DEVICE &&
ur->ucr_request.bRequest == UR_SET_ADDRESS) ||
(ur->ucr_request.bmRequestType == UT_WRITE_DEVICE &&
ur->ucr_request.bRequest == UR_SET_CONFIG) ||
(ur->ucr_request.bmRequestType == UT_WRITE_INTERFACE &&
ur->ucr_request.bRequest == UR_SET_INTERFACE))
return (EINVAL);
if (len < 0 || len > 32767)
return (EINVAL);
if (len != 0) {
iov.iov_base = (caddr_t)ur->ucr_data;
iov.iov_len = len;
uio.uio_iov = &iov;
uio.uio_iovcnt = 1;
uio.uio_resid = len;
uio.uio_offset = 0;
uio.uio_segflg = UIO_USERSPACE;
uio.uio_rw =
ur->ucr_request.bmRequestType & UT_READ ?
UIO_READ : UIO_WRITE;
uio.uio_procp = p;
ptr = malloc(len, M_TEMP, M_WAITOK);
if (uio.uio_rw == UIO_WRITE) {
error = uiomove(ptr, len, &uio);
if (error)
goto ret;
}
}
sce = &sc->sc_endpoints[endpt][IN];
err = usbd_do_request_flags(sc->sc_udev, &ur->ucr_request,
ptr, ur->ucr_flags, &ur->ucr_actlen, sce->timeout);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
if (err) {
error = EIO;
goto ret;
}
if (len != 0) {
if (uio.uio_rw == UIO_READ) {
error = uiomove(ptr, len, &uio);
if (error)
goto ret;
}
}
ret:
if (ptr)
free(ptr, M_TEMP);
return (error);
}
case USB_GET_DEVICEINFO:
usbd_fill_deviceinfo(sc->sc_udev,
(struct usb_device_info *)addr, 1);
break;
default:
return (EINVAL);
}
return (0);
}
int
ugenioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, usb_proc_ptr p)
{
int endpt = UGENENDPOINT(dev);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
struct ugen_softc *sc;
int error;
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
USB_GET_SC(ugen, UGENUNIT(dev), sc);
UGEN_DEV_REF(dev, sc);
error = ugen_do_ioctl(sc, endpt, cmd, addr, flag, p);
UGEN_DEV_RELE(dev, sc);
return (error);
}
int
ugenpoll(struct cdev *dev, int events, usb_proc_ptr p)
{
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
struct ugen_softc *sc;
struct ugen_endpoint *sce;
int revents = 0;
int s;
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
USB_GET_SC(ugen, UGENUNIT(dev), sc);
if (sc->sc_dying)
return (EIO);
/* XXX always IN */
sce = &sc->sc_endpoints[UGENENDPOINT(dev)][IN];
#ifdef DIAGNOSTIC
if (!sce->edesc) {
printf("ugenpoll: no edesc\n");
return (EIO);
}
if (!sce->pipeh) {
printf("ugenpoll: no pipe\n");
return (EIO);
}
#endif
s = splusb();
switch (sce->edesc->bmAttributes & UE_XFERTYPE) {
case UE_INTERRUPT:
if (events & (POLLIN | POLLRDNORM)) {
if (sce->q.c_cc > 0)
revents |= events & (POLLIN | POLLRDNORM);
else
selrecord(p, &sce->rsel);
}
break;
case UE_ISOCHRONOUS:
if (events & (POLLIN | POLLRDNORM)) {
if (sce->cur != sce->fill)
revents |= events & (POLLIN | POLLRDNORM);
else
selrecord(p, &sce->rsel);
}
break;
case UE_BULK:
/*
Back out rev.1.91 which implemented bulk read transfers in ugen(4) as asynchronous. I realize that this means the custom application will not work as written, but it is not okay to break most users of ugen(4). The major problem is that a bulk read transfer is not an interrupt saying that X bytes are available -- it is a request to be able to receive up to X bytes, with T timeout, and S short-transfer-okayness. The timeout is a software mechanism that ugen(4) provides and cannot be implemented using asynchronous reads -- the timeout must start at the time a read is done. The status of up to how many bytes can be received in this transfer and whether a short transfer returns data or error is also encoded at least in ohci(4)'s requests to the controller. Trying to detect the "maximum width" results in using a single buffer of far too small when an application requests a large read. Even if you combat this by replacing all buffers again with the maximal sized read buffer (1kb) that ugen(4) would allow you to use before, you don't get the right semantics -- you have to throw data away or make all the timeouts invalid or make the short-transfer settings invalid. There is no way to do this right without extending the ugen(4) API much further -- it breaks the USB camera interfaces used because they need a chain of many maximal-width transfers, for example, and it makes cross-platform support for all the BSDs gratuitously hard. Instead of trying to do select(2) on a bulk read pipe -- which has neither the information on desired transfer length nor ability to implement timeout -- an application can simply use a kernel thread and pipe to turn that endpoint into something poll-able. It is unfortunate that bulk endpoints cannot provide the same semantics that interrupt and isochronous endpoints can, but it is possible to just use ioctl(USB_GET_ENDPOINT_DESC) to find out when different semantics must be used without preventing the normal users of the ugen(4) device from working.
2004-10-13 04:12:20 +00:00
* We have no easy way of determining if a read will
* yield any data or a write will happen.
* Pretend they will.
*/
Back out rev.1.91 which implemented bulk read transfers in ugen(4) as asynchronous. I realize that this means the custom application will not work as written, but it is not okay to break most users of ugen(4). The major problem is that a bulk read transfer is not an interrupt saying that X bytes are available -- it is a request to be able to receive up to X bytes, with T timeout, and S short-transfer-okayness. The timeout is a software mechanism that ugen(4) provides and cannot be implemented using asynchronous reads -- the timeout must start at the time a read is done. The status of up to how many bytes can be received in this transfer and whether a short transfer returns data or error is also encoded at least in ohci(4)'s requests to the controller. Trying to detect the "maximum width" results in using a single buffer of far too small when an application requests a large read. Even if you combat this by replacing all buffers again with the maximal sized read buffer (1kb) that ugen(4) would allow you to use before, you don't get the right semantics -- you have to throw data away or make all the timeouts invalid or make the short-transfer settings invalid. There is no way to do this right without extending the ugen(4) API much further -- it breaks the USB camera interfaces used because they need a chain of many maximal-width transfers, for example, and it makes cross-platform support for all the BSDs gratuitously hard. Instead of trying to do select(2) on a bulk read pipe -- which has neither the information on desired transfer length nor ability to implement timeout -- an application can simply use a kernel thread and pipe to turn that endpoint into something poll-able. It is unfortunate that bulk endpoints cannot provide the same semantics that interrupt and isochronous endpoints can, but it is possible to just use ioctl(USB_GET_ENDPOINT_DESC) to find out when different semantics must be used without preventing the normal users of the ugen(4) device from working.
2004-10-13 04:12:20 +00:00
revents |= events &
(POLLIN | POLLRDNORM | POLLOUT | POLLWRNORM);
break;
default:
break;
}
splx(s);
return (revents);
}
#if defined(__FreeBSD__)
DRIVER_MODULE(ugen, uhub, ugen_driver, ugen_devclass, usbd_driver_load, 0);
#endif