freebsd-dev/sys/i386/conf/GENERIC

144 lines
4.8 KiB
Plaintext
Raw Normal View History

#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
# $Id: GENERIC,v 1.67 1996/04/22 19:40:24 nate Exp $
#
machine "i386"
cpu "I386_CPU"
cpu "I486_CPU"
cpu "I586_CPU"
1995-12-24 08:11:46 +00:00
cpu "I686_CPU"
ident GENERIC
maxusers 10
options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options NFS #Network Filesystem
options MSDOSFS #MSDOS Filesystem
1994-11-05 07:41:08 +00:00
options "CD9660" #ISO 9660 Filesystem
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=15 #Be pessimistic about Joe SCSI device
options BOUNCE_BUFFERS #include support for DMA bounce buffers
options UCONSOLE #Allow users to grab the console
options FAILSAFE #Be conservative
config kernel root on wd0
controller isa0
controller eisa0
controller pci0
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk fd0 at fdc0 drive 0
disk fd1 at fdc0 drive 1
1994-11-10 23:46:31 +00:00
tape ft0 at fdc0 drive 2
controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr
disk wd0 at wdc0 drive 0
disk wd1 at wdc0 drive 1
controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr
disk wd2 at wdc1 drive 0
disk wd3 at wdc1 drive 1
options ATAPI #Enable ATAPI support for IDE bus
options ATAPI_STATIC #Don't do it as an LKM
device wcd0 #IDE CD-ROM
# A single entry for any of these controllers (ncr, ahb, ahc) is sufficient
# for any number of installed devices.
controller ncr0
controller ahb0
controller ahc0
controller bt0 at isa? port "IO_BT0" bio irq ? vector bt_isa_intr
controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr
controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr
controller aic0 at isa? port 0x340 bio irq 11 vector aicintr
controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr
controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr
controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr
controller scbus0
device sd0
1995-10-31 17:00:03 +00:00
device od0
device st0
device cd0 #Only need one of these, the code dynamically grows
device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr
device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr
device mcd1 at isa? port 0x340 bio irq 11 vector mcdintr
controller matcd0 at isa? port 0x230 bio
device scd0 at isa? port 0x230 bio
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint
#options PCVT_FREEBSD=210 # pcvt running on FreeBSD >= 2.0.5
#options XSERVER # include code for XFree86
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
# Mandatory, don't remove
device npx0 at isa? port "IO_NPX" irq 13 vector npxintr
#
# Laptop support (see LINT for more options)
#
device apm0 at isa? disable # Advanced Power Management
options APM_BROKEN_STATCLOCK # Workaround some buggy APM BIOS
device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr
#device sio3 at isa? port "IO_COM4" tty irq 9 vector siointr
device lpt0 at isa? port? tty irq 7 vector lptintr
device lpt1 at isa? port? tty
device lpt2 at isa? port? tty
device mse0 at isa? port 0x23c tty irq 5 vector mseintr
device psm0 at isa? disable port "IO_KBD" conflicts tty irq 12 vector psmintr
1995-06-11 19:33:05 +00:00
# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
1994-11-11 05:48:49 +00:00
device de0
device fxp0
device vx0
device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr
device ed1 at isa? port 0x300 net irq 5 iomem 0xd8000 vector edintr
device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr
1995-06-11 19:33:05 +00:00
device ep0 at isa? port 0x300 net irq 10 vector epintr
device fe0 at isa? port 0x300 net irq ? vector feintr
device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr
device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
1995-04-10 19:12:29 +00:00
device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr
device lnc1 at isa? port 0x300 net irq 10 drq 0 vector lncintr
device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr
device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr
pseudo-device loop
pseudo-device ether
pseudo-device log
pseudo-device sl 1
1995-06-11 19:33:05 +00:00
# ijppp uses tun instead of ppp device
#pseudo-device ppp 1
pseudo-device tun 1
pseudo-device pty 16
# keep this if you want to be able to continue to use /stand/sysinstall
pseudo-device gzip # Exec gzipped a.out's