freebsd-dev/tests/sys/netinet/udp_dontroute.c

112 lines
3.4 KiB
C
Raw Normal View History

Fix subnet and default routes on different FIBs on the same subnet. These two bugs are closely related. The root cause is that ifa_ifwithnet does not consider FIBs when searching for an interface address. sys/net/if_var.h sys/net/if.c Add a fib argument to ifa_ifwithnet and ifa_ifwithdstadddr. Those functions will only return an address whose interface fib equals the argument. sys/net/route.c Update calls to ifa_ifwithnet and ifa_ifwithdstaddr with fib arguments. sys/netinet/in.c Update in_addprefix to consider the interface fib when adding prefixes. This will prevent it from not adding a subnet route when one already exists on a different fib. sys/net/rtsock.c sys/netinet/in_pcb.c sys/netinet/ip_output.c sys/netinet/ip_options.c sys/netinet6/nd6.c Add RT_DEFAULT_FIB arguments to ifa_ifwithdstaddr and ifa_ifwithnet. In some cases it there wasn't a clear specific fib number to use. In others, I was unable to test those functions so I chose RT_DEFAULT_FIB to minimize divergence from current behavior. I will fix some of the latter changes along with PR kern/187553. tests/sys/netinet/fibs_test.sh tests/sys/netinet/udp_dontroute.c tests/sys/netinet/Makefile Revert r263738. The udp_dontroute test was right all along. However, bugs kern/187550 and kern/187553 cancelled each other out when it came to this test. Because of kern/187553, ifa_ifwithnet searched the default fib instead of the requested one, but because of kern/187550, there was an applicable subnet route on the default fib. The new test added in r263738 doesn't work right, however. I can verify with dtrace that ifa_ifwithnet returned the wrong address before I applied this commit, but route(8) miraculously found the correct interface to use anyway. I don't know how. Clear expected failure messages for kern/187550 and kern/187552. PR: kern/187550 PR: kern/187552 Reviewed by: melifaro MFC after: 3 weeks Sponsored by: Spectra Logic
2014-04-24 23:56:56 +00:00
/*
* Copyright (c) 2014 Spectra Logic Corporation
* All rights reserved.
*
Fix subnet and default routes on different FIBs on the same subnet. These two bugs are closely related. The root cause is that ifa_ifwithnet does not consider FIBs when searching for an interface address. sys/net/if_var.h sys/net/if.c Add a fib argument to ifa_ifwithnet and ifa_ifwithdstadddr. Those functions will only return an address whose interface fib equals the argument. sys/net/route.c Update calls to ifa_ifwithnet and ifa_ifwithdstaddr with fib arguments. sys/netinet/in.c Update in_addprefix to consider the interface fib when adding prefixes. This will prevent it from not adding a subnet route when one already exists on a different fib. sys/net/rtsock.c sys/netinet/in_pcb.c sys/netinet/ip_output.c sys/netinet/ip_options.c sys/netinet6/nd6.c Add RT_DEFAULT_FIB arguments to ifa_ifwithdstaddr and ifa_ifwithnet. In some cases it there wasn't a clear specific fib number to use. In others, I was unable to test those functions so I chose RT_DEFAULT_FIB to minimize divergence from current behavior. I will fix some of the latter changes along with PR kern/187553. tests/sys/netinet/fibs_test.sh tests/sys/netinet/udp_dontroute.c tests/sys/netinet/Makefile Revert r263738. The udp_dontroute test was right all along. However, bugs kern/187550 and kern/187553 cancelled each other out when it came to this test. Because of kern/187553, ifa_ifwithnet searched the default fib instead of the requested one, but because of kern/187550, there was an applicable subnet route on the default fib. The new test added in r263738 doesn't work right, however. I can verify with dtrace that ifa_ifwithnet returned the wrong address before I applied this commit, but route(8) miraculously found the correct interface to use anyway. I don't know how. Clear expected failure messages for kern/187550 and kern/187552. PR: kern/187550 PR: kern/187552 Reviewed by: melifaro MFC after: 3 weeks Sponsored by: Spectra Logic
2014-04-24 23:56:56 +00:00
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
*
Fix subnet and default routes on different FIBs on the same subnet. These two bugs are closely related. The root cause is that ifa_ifwithnet does not consider FIBs when searching for an interface address. sys/net/if_var.h sys/net/if.c Add a fib argument to ifa_ifwithnet and ifa_ifwithdstadddr. Those functions will only return an address whose interface fib equals the argument. sys/net/route.c Update calls to ifa_ifwithnet and ifa_ifwithdstaddr with fib arguments. sys/netinet/in.c Update in_addprefix to consider the interface fib when adding prefixes. This will prevent it from not adding a subnet route when one already exists on a different fib. sys/net/rtsock.c sys/netinet/in_pcb.c sys/netinet/ip_output.c sys/netinet/ip_options.c sys/netinet6/nd6.c Add RT_DEFAULT_FIB arguments to ifa_ifwithdstaddr and ifa_ifwithnet. In some cases it there wasn't a clear specific fib number to use. In others, I was unable to test those functions so I chose RT_DEFAULT_FIB to minimize divergence from current behavior. I will fix some of the latter changes along with PR kern/187553. tests/sys/netinet/fibs_test.sh tests/sys/netinet/udp_dontroute.c tests/sys/netinet/Makefile Revert r263738. The udp_dontroute test was right all along. However, bugs kern/187550 and kern/187553 cancelled each other out when it came to this test. Because of kern/187553, ifa_ifwithnet searched the default fib instead of the requested one, but because of kern/187550, there was an applicable subnet route on the default fib. The new test added in r263738 doesn't work right, however. I can verify with dtrace that ifa_ifwithnet returned the wrong address before I applied this commit, but route(8) miraculously found the correct interface to use anyway. I don't know how. Clear expected failure messages for kern/187550 and kern/187552. PR: kern/187550 PR: kern/187552 Reviewed by: melifaro MFC after: 3 weeks Sponsored by: Spectra Logic
2014-04-24 23:56:56 +00:00
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
Fix subnet and default routes on different FIBs on the same subnet. These two bugs are closely related. The root cause is that ifa_ifwithnet does not consider FIBs when searching for an interface address. sys/net/if_var.h sys/net/if.c Add a fib argument to ifa_ifwithnet and ifa_ifwithdstadddr. Those functions will only return an address whose interface fib equals the argument. sys/net/route.c Update calls to ifa_ifwithnet and ifa_ifwithdstaddr with fib arguments. sys/netinet/in.c Update in_addprefix to consider the interface fib when adding prefixes. This will prevent it from not adding a subnet route when one already exists on a different fib. sys/net/rtsock.c sys/netinet/in_pcb.c sys/netinet/ip_output.c sys/netinet/ip_options.c sys/netinet6/nd6.c Add RT_DEFAULT_FIB arguments to ifa_ifwithdstaddr and ifa_ifwithnet. In some cases it there wasn't a clear specific fib number to use. In others, I was unable to test those functions so I chose RT_DEFAULT_FIB to minimize divergence from current behavior. I will fix some of the latter changes along with PR kern/187553. tests/sys/netinet/fibs_test.sh tests/sys/netinet/udp_dontroute.c tests/sys/netinet/Makefile Revert r263738. The udp_dontroute test was right all along. However, bugs kern/187550 and kern/187553 cancelled each other out when it came to this test. Because of kern/187553, ifa_ifwithnet searched the default fib instead of the requested one, but because of kern/187550, there was an applicable subnet route on the default fib. The new test added in r263738 doesn't work right, however. I can verify with dtrace that ifa_ifwithnet returned the wrong address before I applied this commit, but route(8) miraculously found the correct interface to use anyway. I don't know how. Clear expected failure messages for kern/187550 and kern/187552. PR: kern/187550 PR: kern/187552 Reviewed by: melifaro MFC after: 3 weeks Sponsored by: Spectra Logic
2014-04-24 23:56:56 +00:00
* Authors: Alan Somers (Spectra Logic Corporation)
*
* $FreeBSD$
*/
#include <arpa/inet.h>
#include <netinet/in.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <err.h>
#include <errno.h>
#include <fcntl.h>
Fix subnet and default routes on different FIBs on the same subnet. These two bugs are closely related. The root cause is that ifa_ifwithnet does not consider FIBs when searching for an interface address. sys/net/if_var.h sys/net/if.c Add a fib argument to ifa_ifwithnet and ifa_ifwithdstadddr. Those functions will only return an address whose interface fib equals the argument. sys/net/route.c Update calls to ifa_ifwithnet and ifa_ifwithdstaddr with fib arguments. sys/netinet/in.c Update in_addprefix to consider the interface fib when adding prefixes. This will prevent it from not adding a subnet route when one already exists on a different fib. sys/net/rtsock.c sys/netinet/in_pcb.c sys/netinet/ip_output.c sys/netinet/ip_options.c sys/netinet6/nd6.c Add RT_DEFAULT_FIB arguments to ifa_ifwithdstaddr and ifa_ifwithnet. In some cases it there wasn't a clear specific fib number to use. In others, I was unable to test those functions so I chose RT_DEFAULT_FIB to minimize divergence from current behavior. I will fix some of the latter changes along with PR kern/187553. tests/sys/netinet/fibs_test.sh tests/sys/netinet/udp_dontroute.c tests/sys/netinet/Makefile Revert r263738. The udp_dontroute test was right all along. However, bugs kern/187550 and kern/187553 cancelled each other out when it came to this test. Because of kern/187553, ifa_ifwithnet searched the default fib instead of the requested one, but because of kern/187550, there was an applicable subnet route on the default fib. The new test added in r263738 doesn't work right, however. I can verify with dtrace that ifa_ifwithnet returned the wrong address before I applied this commit, but route(8) miraculously found the correct interface to use anyway. I don't know how. Clear expected failure messages for kern/187550 and kern/187552. PR: kern/187550 PR: kern/187552 Reviewed by: melifaro MFC after: 3 weeks Sponsored by: Spectra Logic
2014-04-24 23:56:56 +00:00
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
Fix subnet and default routes on different FIBs on the same subnet. These two bugs are closely related. The root cause is that ifa_ifwithnet does not consider FIBs when searching for an interface address. sys/net/if_var.h sys/net/if.c Add a fib argument to ifa_ifwithnet and ifa_ifwithdstadddr. Those functions will only return an address whose interface fib equals the argument. sys/net/route.c Update calls to ifa_ifwithnet and ifa_ifwithdstaddr with fib arguments. sys/netinet/in.c Update in_addprefix to consider the interface fib when adding prefixes. This will prevent it from not adding a subnet route when one already exists on a different fib. sys/net/rtsock.c sys/netinet/in_pcb.c sys/netinet/ip_output.c sys/netinet/ip_options.c sys/netinet6/nd6.c Add RT_DEFAULT_FIB arguments to ifa_ifwithdstaddr and ifa_ifwithnet. In some cases it there wasn't a clear specific fib number to use. In others, I was unable to test those functions so I chose RT_DEFAULT_FIB to minimize divergence from current behavior. I will fix some of the latter changes along with PR kern/187553. tests/sys/netinet/fibs_test.sh tests/sys/netinet/udp_dontroute.c tests/sys/netinet/Makefile Revert r263738. The udp_dontroute test was right all along. However, bugs kern/187550 and kern/187553 cancelled each other out when it came to this test. Because of kern/187553, ifa_ifwithnet searched the default fib instead of the requested one, but because of kern/187550, there was an applicable subnet route on the default fib. The new test added in r263738 doesn't work right, however. I can verify with dtrace that ifa_ifwithnet returned the wrong address before I applied this commit, but route(8) miraculously found the correct interface to use anyway. I don't know how. Clear expected failure messages for kern/187550 and kern/187552. PR: kern/187550 PR: kern/187552 Reviewed by: melifaro MFC after: 3 weeks Sponsored by: Spectra Logic
2014-04-24 23:56:56 +00:00
/*
Fix subnet and default routes on different FIBs on the same subnet. These two bugs are closely related. The root cause is that ifa_ifwithnet does not consider FIBs when searching for an interface address. sys/net/if_var.h sys/net/if.c Add a fib argument to ifa_ifwithnet and ifa_ifwithdstadddr. Those functions will only return an address whose interface fib equals the argument. sys/net/route.c Update calls to ifa_ifwithnet and ifa_ifwithdstaddr with fib arguments. sys/netinet/in.c Update in_addprefix to consider the interface fib when adding prefixes. This will prevent it from not adding a subnet route when one already exists on a different fib. sys/net/rtsock.c sys/netinet/in_pcb.c sys/netinet/ip_output.c sys/netinet/ip_options.c sys/netinet6/nd6.c Add RT_DEFAULT_FIB arguments to ifa_ifwithdstaddr and ifa_ifwithnet. In some cases it there wasn't a clear specific fib number to use. In others, I was unable to test those functions so I chose RT_DEFAULT_FIB to minimize divergence from current behavior. I will fix some of the latter changes along with PR kern/187553. tests/sys/netinet/fibs_test.sh tests/sys/netinet/udp_dontroute.c tests/sys/netinet/Makefile Revert r263738. The udp_dontroute test was right all along. However, bugs kern/187550 and kern/187553 cancelled each other out when it came to this test. Because of kern/187553, ifa_ifwithnet searched the default fib instead of the requested one, but because of kern/187550, there was an applicable subnet route on the default fib. The new test added in r263738 doesn't work right, however. I can verify with dtrace that ifa_ifwithnet returned the wrong address before I applied this commit, but route(8) miraculously found the correct interface to use anyway. I don't know how. Clear expected failure messages for kern/187550 and kern/187552. PR: kern/187550 PR: kern/187552 Reviewed by: melifaro MFC after: 3 weeks Sponsored by: Spectra Logic
2014-04-24 23:56:56 +00:00
* Sends a single UDP packet to the provided address, with SO_DONTROUTE set
* I couldn't find a way to do this with builtin utilities like nc(1)
*/
int
main(int argc, char **argv)
Fix subnet and default routes on different FIBs on the same subnet. These two bugs are closely related. The root cause is that ifa_ifwithnet does not consider FIBs when searching for an interface address. sys/net/if_var.h sys/net/if.c Add a fib argument to ifa_ifwithnet and ifa_ifwithdstadddr. Those functions will only return an address whose interface fib equals the argument. sys/net/route.c Update calls to ifa_ifwithnet and ifa_ifwithdstaddr with fib arguments. sys/netinet/in.c Update in_addprefix to consider the interface fib when adding prefixes. This will prevent it from not adding a subnet route when one already exists on a different fib. sys/net/rtsock.c sys/netinet/in_pcb.c sys/netinet/ip_output.c sys/netinet/ip_options.c sys/netinet6/nd6.c Add RT_DEFAULT_FIB arguments to ifa_ifwithdstaddr and ifa_ifwithnet. In some cases it there wasn't a clear specific fib number to use. In others, I was unable to test those functions so I chose RT_DEFAULT_FIB to minimize divergence from current behavior. I will fix some of the latter changes along with PR kern/187553. tests/sys/netinet/fibs_test.sh tests/sys/netinet/udp_dontroute.c tests/sys/netinet/Makefile Revert r263738. The udp_dontroute test was right all along. However, bugs kern/187550 and kern/187553 cancelled each other out when it came to this test. Because of kern/187553, ifa_ifwithnet searched the default fib instead of the requested one, but because of kern/187550, there was an applicable subnet route on the default fib. The new test added in r263738 doesn't work right, however. I can verify with dtrace that ifa_ifwithnet returned the wrong address before I applied this commit, but route(8) miraculously found the correct interface to use anyway. I don't know how. Clear expected failure messages for kern/187550 and kern/187552. PR: kern/187550 PR: kern/187552 Reviewed by: melifaro MFC after: 3 weeks Sponsored by: Spectra Logic
2014-04-24 23:56:56 +00:00
{
struct sockaddr_in dst;
int s, t;
Fix subnet and default routes on different FIBs on the same subnet. These two bugs are closely related. The root cause is that ifa_ifwithnet does not consider FIBs when searching for an interface address. sys/net/if_var.h sys/net/if.c Add a fib argument to ifa_ifwithnet and ifa_ifwithdstadddr. Those functions will only return an address whose interface fib equals the argument. sys/net/route.c Update calls to ifa_ifwithnet and ifa_ifwithdstaddr with fib arguments. sys/netinet/in.c Update in_addprefix to consider the interface fib when adding prefixes. This will prevent it from not adding a subnet route when one already exists on a different fib. sys/net/rtsock.c sys/netinet/in_pcb.c sys/netinet/ip_output.c sys/netinet/ip_options.c sys/netinet6/nd6.c Add RT_DEFAULT_FIB arguments to ifa_ifwithdstaddr and ifa_ifwithnet. In some cases it there wasn't a clear specific fib number to use. In others, I was unable to test those functions so I chose RT_DEFAULT_FIB to minimize divergence from current behavior. I will fix some of the latter changes along with PR kern/187553. tests/sys/netinet/fibs_test.sh tests/sys/netinet/udp_dontroute.c tests/sys/netinet/Makefile Revert r263738. The udp_dontroute test was right all along. However, bugs kern/187550 and kern/187553 cancelled each other out when it came to this test. Because of kern/187553, ifa_ifwithnet searched the default fib instead of the requested one, but because of kern/187550, there was an applicable subnet route on the default fib. The new test added in r263738 doesn't work right, however. I can verify with dtrace that ifa_ifwithnet returned the wrong address before I applied this commit, but route(8) miraculously found the correct interface to use anyway. I don't know how. Clear expected failure messages for kern/187550 and kern/187552. PR: kern/187550 PR: kern/187552 Reviewed by: melifaro MFC after: 3 weeks Sponsored by: Spectra Logic
2014-04-24 23:56:56 +00:00
int opt;
int ret;
ssize_t len;
const char* sendbuf = "Hello, World!";
const size_t buflen = 80;
char recvbuf[buflen];
Fix subnet and default routes on different FIBs on the same subnet. These two bugs are closely related. The root cause is that ifa_ifwithnet does not consider FIBs when searching for an interface address. sys/net/if_var.h sys/net/if.c Add a fib argument to ifa_ifwithnet and ifa_ifwithdstadddr. Those functions will only return an address whose interface fib equals the argument. sys/net/route.c Update calls to ifa_ifwithnet and ifa_ifwithdstaddr with fib arguments. sys/netinet/in.c Update in_addprefix to consider the interface fib when adding prefixes. This will prevent it from not adding a subnet route when one already exists on a different fib. sys/net/rtsock.c sys/netinet/in_pcb.c sys/netinet/ip_output.c sys/netinet/ip_options.c sys/netinet6/nd6.c Add RT_DEFAULT_FIB arguments to ifa_ifwithdstaddr and ifa_ifwithnet. In some cases it there wasn't a clear specific fib number to use. In others, I was unable to test those functions so I chose RT_DEFAULT_FIB to minimize divergence from current behavior. I will fix some of the latter changes along with PR kern/187553. tests/sys/netinet/fibs_test.sh tests/sys/netinet/udp_dontroute.c tests/sys/netinet/Makefile Revert r263738. The udp_dontroute test was right all along. However, bugs kern/187550 and kern/187553 cancelled each other out when it came to this test. Because of kern/187553, ifa_ifwithnet searched the default fib instead of the requested one, but because of kern/187550, there was an applicable subnet route on the default fib. The new test added in r263738 doesn't work right, however. I can verify with dtrace that ifa_ifwithnet returned the wrong address before I applied this commit, but route(8) miraculously found the correct interface to use anyway. I don't know how. Clear expected failure messages for kern/187550 and kern/187552. PR: kern/187550 PR: kern/187552 Reviewed by: melifaro MFC after: 3 weeks Sponsored by: Spectra Logic
2014-04-24 23:56:56 +00:00
if (argc != 3) {
fprintf(stderr, "Usage: %s ip_address tapdev\n", argv[0]);
Fix subnet and default routes on different FIBs on the same subnet. These two bugs are closely related. The root cause is that ifa_ifwithnet does not consider FIBs when searching for an interface address. sys/net/if_var.h sys/net/if.c Add a fib argument to ifa_ifwithnet and ifa_ifwithdstadddr. Those functions will only return an address whose interface fib equals the argument. sys/net/route.c Update calls to ifa_ifwithnet and ifa_ifwithdstaddr with fib arguments. sys/netinet/in.c Update in_addprefix to consider the interface fib when adding prefixes. This will prevent it from not adding a subnet route when one already exists on a different fib. sys/net/rtsock.c sys/netinet/in_pcb.c sys/netinet/ip_output.c sys/netinet/ip_options.c sys/netinet6/nd6.c Add RT_DEFAULT_FIB arguments to ifa_ifwithdstaddr and ifa_ifwithnet. In some cases it there wasn't a clear specific fib number to use. In others, I was unable to test those functions so I chose RT_DEFAULT_FIB to minimize divergence from current behavior. I will fix some of the latter changes along with PR kern/187553. tests/sys/netinet/fibs_test.sh tests/sys/netinet/udp_dontroute.c tests/sys/netinet/Makefile Revert r263738. The udp_dontroute test was right all along. However, bugs kern/187550 and kern/187553 cancelled each other out when it came to this test. Because of kern/187553, ifa_ifwithnet searched the default fib instead of the requested one, but because of kern/187550, there was an applicable subnet route on the default fib. The new test added in r263738 doesn't work right, however. I can verify with dtrace that ifa_ifwithnet returned the wrong address before I applied this commit, but route(8) miraculously found the correct interface to use anyway. I don't know how. Clear expected failure messages for kern/187550 and kern/187552. PR: kern/187550 PR: kern/187552 Reviewed by: melifaro MFC after: 3 weeks Sponsored by: Spectra Logic
2014-04-24 23:56:56 +00:00
exit(2);
}
t = open(argv[2], O_RDWR | O_NONBLOCK);
if (t < 0)
err(EXIT_FAILURE, "open");
Fix subnet and default routes on different FIBs on the same subnet. These two bugs are closely related. The root cause is that ifa_ifwithnet does not consider FIBs when searching for an interface address. sys/net/if_var.h sys/net/if.c Add a fib argument to ifa_ifwithnet and ifa_ifwithdstadddr. Those functions will only return an address whose interface fib equals the argument. sys/net/route.c Update calls to ifa_ifwithnet and ifa_ifwithdstaddr with fib arguments. sys/netinet/in.c Update in_addprefix to consider the interface fib when adding prefixes. This will prevent it from not adding a subnet route when one already exists on a different fib. sys/net/rtsock.c sys/netinet/in_pcb.c sys/netinet/ip_output.c sys/netinet/ip_options.c sys/netinet6/nd6.c Add RT_DEFAULT_FIB arguments to ifa_ifwithdstaddr and ifa_ifwithnet. In some cases it there wasn't a clear specific fib number to use. In others, I was unable to test those functions so I chose RT_DEFAULT_FIB to minimize divergence from current behavior. I will fix some of the latter changes along with PR kern/187553. tests/sys/netinet/fibs_test.sh tests/sys/netinet/udp_dontroute.c tests/sys/netinet/Makefile Revert r263738. The udp_dontroute test was right all along. However, bugs kern/187550 and kern/187553 cancelled each other out when it came to this test. Because of kern/187553, ifa_ifwithnet searched the default fib instead of the requested one, but because of kern/187550, there was an applicable subnet route on the default fib. The new test added in r263738 doesn't work right, however. I can verify with dtrace that ifa_ifwithnet returned the wrong address before I applied this commit, but route(8) miraculously found the correct interface to use anyway. I don't know how. Clear expected failure messages for kern/187550 and kern/187552. PR: kern/187550 PR: kern/187552 Reviewed by: melifaro MFC after: 3 weeks Sponsored by: Spectra Logic
2014-04-24 23:56:56 +00:00
s = socket(PF_INET, SOCK_DGRAM, 0);
if (s < 0)
err(EXIT_FAILURE, "socket");
Fix subnet and default routes on different FIBs on the same subnet. These two bugs are closely related. The root cause is that ifa_ifwithnet does not consider FIBs when searching for an interface address. sys/net/if_var.h sys/net/if.c Add a fib argument to ifa_ifwithnet and ifa_ifwithdstadddr. Those functions will only return an address whose interface fib equals the argument. sys/net/route.c Update calls to ifa_ifwithnet and ifa_ifwithdstaddr with fib arguments. sys/netinet/in.c Update in_addprefix to consider the interface fib when adding prefixes. This will prevent it from not adding a subnet route when one already exists on a different fib. sys/net/rtsock.c sys/netinet/in_pcb.c sys/netinet/ip_output.c sys/netinet/ip_options.c sys/netinet6/nd6.c Add RT_DEFAULT_FIB arguments to ifa_ifwithdstaddr and ifa_ifwithnet. In some cases it there wasn't a clear specific fib number to use. In others, I was unable to test those functions so I chose RT_DEFAULT_FIB to minimize divergence from current behavior. I will fix some of the latter changes along with PR kern/187553. tests/sys/netinet/fibs_test.sh tests/sys/netinet/udp_dontroute.c tests/sys/netinet/Makefile Revert r263738. The udp_dontroute test was right all along. However, bugs kern/187550 and kern/187553 cancelled each other out when it came to this test. Because of kern/187553, ifa_ifwithnet searched the default fib instead of the requested one, but because of kern/187550, there was an applicable subnet route on the default fib. The new test added in r263738 doesn't work right, however. I can verify with dtrace that ifa_ifwithnet returned the wrong address before I applied this commit, but route(8) miraculously found the correct interface to use anyway. I don't know how. Clear expected failure messages for kern/187550 and kern/187552. PR: kern/187550 PR: kern/187552 Reviewed by: melifaro MFC after: 3 weeks Sponsored by: Spectra Logic
2014-04-24 23:56:56 +00:00
opt = 1;
ret = setsockopt(s, SOL_SOCKET, SO_DONTROUTE, &opt, sizeof(opt));
if (ret == -1)
err(EXIT_FAILURE, "setsockopt(SO_DONTROUTE)");
Fix subnet and default routes on different FIBs on the same subnet. These two bugs are closely related. The root cause is that ifa_ifwithnet does not consider FIBs when searching for an interface address. sys/net/if_var.h sys/net/if.c Add a fib argument to ifa_ifwithnet and ifa_ifwithdstadddr. Those functions will only return an address whose interface fib equals the argument. sys/net/route.c Update calls to ifa_ifwithnet and ifa_ifwithdstaddr with fib arguments. sys/netinet/in.c Update in_addprefix to consider the interface fib when adding prefixes. This will prevent it from not adding a subnet route when one already exists on a different fib. sys/net/rtsock.c sys/netinet/in_pcb.c sys/netinet/ip_output.c sys/netinet/ip_options.c sys/netinet6/nd6.c Add RT_DEFAULT_FIB arguments to ifa_ifwithdstaddr and ifa_ifwithnet. In some cases it there wasn't a clear specific fib number to use. In others, I was unable to test those functions so I chose RT_DEFAULT_FIB to minimize divergence from current behavior. I will fix some of the latter changes along with PR kern/187553. tests/sys/netinet/fibs_test.sh tests/sys/netinet/udp_dontroute.c tests/sys/netinet/Makefile Revert r263738. The udp_dontroute test was right all along. However, bugs kern/187550 and kern/187553 cancelled each other out when it came to this test. Because of kern/187553, ifa_ifwithnet searched the default fib instead of the requested one, but because of kern/187550, there was an applicable subnet route on the default fib. The new test added in r263738 doesn't work right, however. I can verify with dtrace that ifa_ifwithnet returned the wrong address before I applied this commit, but route(8) miraculously found the correct interface to use anyway. I don't know how. Clear expected failure messages for kern/187550 and kern/187552. PR: kern/187550 PR: kern/187552 Reviewed by: melifaro MFC after: 3 weeks Sponsored by: Spectra Logic
2014-04-24 23:56:56 +00:00
dst.sin_len = sizeof(dst);
dst.sin_family = AF_INET;
dst.sin_port = htons(46120);
dst.sin_addr.s_addr = inet_addr(argv[1]);
if (dst.sin_addr.s_addr == htonl(INADDR_NONE)) {
fprintf(stderr, "Invalid address: %s\n", argv[1]);
exit(2);
}
ret = sendto(s, sendbuf, strlen(sendbuf), 0, (struct sockaddr*)&dst,
Fix subnet and default routes on different FIBs on the same subnet. These two bugs are closely related. The root cause is that ifa_ifwithnet does not consider FIBs when searching for an interface address. sys/net/if_var.h sys/net/if.c Add a fib argument to ifa_ifwithnet and ifa_ifwithdstadddr. Those functions will only return an address whose interface fib equals the argument. sys/net/route.c Update calls to ifa_ifwithnet and ifa_ifwithdstaddr with fib arguments. sys/netinet/in.c Update in_addprefix to consider the interface fib when adding prefixes. This will prevent it from not adding a subnet route when one already exists on a different fib. sys/net/rtsock.c sys/netinet/in_pcb.c sys/netinet/ip_output.c sys/netinet/ip_options.c sys/netinet6/nd6.c Add RT_DEFAULT_FIB arguments to ifa_ifwithdstaddr and ifa_ifwithnet. In some cases it there wasn't a clear specific fib number to use. In others, I was unable to test those functions so I chose RT_DEFAULT_FIB to minimize divergence from current behavior. I will fix some of the latter changes along with PR kern/187553. tests/sys/netinet/fibs_test.sh tests/sys/netinet/udp_dontroute.c tests/sys/netinet/Makefile Revert r263738. The udp_dontroute test was right all along. However, bugs kern/187550 and kern/187553 cancelled each other out when it came to this test. Because of kern/187553, ifa_ifwithnet searched the default fib instead of the requested one, but because of kern/187550, there was an applicable subnet route on the default fib. The new test added in r263738 doesn't work right, however. I can verify with dtrace that ifa_ifwithnet returned the wrong address before I applied this commit, but route(8) miraculously found the correct interface to use anyway. I don't know how. Clear expected failure messages for kern/187550 and kern/187552. PR: kern/187550 PR: kern/187552 Reviewed by: melifaro MFC after: 3 weeks Sponsored by: Spectra Logic
2014-04-24 23:56:56 +00:00
dst.sin_len);
if (ret == -1)
err(EXIT_FAILURE, "sendto");
/* Verify that the packet went to the desired tap device */
len = read(t, recvbuf, buflen);
if (len == 0)
errx(EXIT_FAILURE, "read returned EOF");
else if (len < 0 && errno == EAGAIN)
errx(EXIT_FAILURE, "Did not receive any packets");
else if (len < 0)
err(EXIT_FAILURE, "read");
/*
* If read returned anything at all, consider it a success. The packet
* should be an Ethernet frame containing an ARP request for
* ip_address. We won't bother to decode it
*/
Fix subnet and default routes on different FIBs on the same subnet. These two bugs are closely related. The root cause is that ifa_ifwithnet does not consider FIBs when searching for an interface address. sys/net/if_var.h sys/net/if.c Add a fib argument to ifa_ifwithnet and ifa_ifwithdstadddr. Those functions will only return an address whose interface fib equals the argument. sys/net/route.c Update calls to ifa_ifwithnet and ifa_ifwithdstaddr with fib arguments. sys/netinet/in.c Update in_addprefix to consider the interface fib when adding prefixes. This will prevent it from not adding a subnet route when one already exists on a different fib. sys/net/rtsock.c sys/netinet/in_pcb.c sys/netinet/ip_output.c sys/netinet/ip_options.c sys/netinet6/nd6.c Add RT_DEFAULT_FIB arguments to ifa_ifwithdstaddr and ifa_ifwithnet. In some cases it there wasn't a clear specific fib number to use. In others, I was unable to test those functions so I chose RT_DEFAULT_FIB to minimize divergence from current behavior. I will fix some of the latter changes along with PR kern/187553. tests/sys/netinet/fibs_test.sh tests/sys/netinet/udp_dontroute.c tests/sys/netinet/Makefile Revert r263738. The udp_dontroute test was right all along. However, bugs kern/187550 and kern/187553 cancelled each other out when it came to this test. Because of kern/187553, ifa_ifwithnet searched the default fib instead of the requested one, but because of kern/187550, there was an applicable subnet route on the default fib. The new test added in r263738 doesn't work right, however. I can verify with dtrace that ifa_ifwithnet returned the wrong address before I applied this commit, but route(8) miraculously found the correct interface to use anyway. I don't know how. Clear expected failure messages for kern/187550 and kern/187552. PR: kern/187550 PR: kern/187552 Reviewed by: melifaro MFC after: 3 weeks Sponsored by: Spectra Logic
2014-04-24 23:56:56 +00:00
return (0);
}