freebsd-dev/sys/dev/buslogic/bt_pci.c

211 lines
5.8 KiB
C
Raw Normal View History

/*
* Product specific probe and attach routines for:
* Buslogic BT946, BT948, BT956, BT958 SCSI controllers
*
* Copyright (c) 1995, 1997, 1998 Justin T. Gibbs
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $Id: bt_pci.c,v 1.2 1998/10/30 02:06:42 gibbs Exp $
*/
#include "pci.h"
#if NPCI > 0
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <pci/pcireg.h>
#include <pci/pcivar.h>
#include <machine/bus_memio.h>
#include <machine/bus_pio.h>
#include <machine/bus.h>
#include <dev/buslogic/btreg.h>
#define BT_PCI_IOADDR PCIR_MAPS
#define BT_PCI_MEMADDR PCIR_MAPS + 4
#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER 0x1040104Bul
#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC 0x0140104Bul
#define PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT 0x8130104Bul
static int btpcideterminebusspace(pcici_t config_id, bus_space_tag_t* tagp,
bus_space_handle_t* bshp);
static char* bt_pci_probe(pcici_t tag, pcidi_t type);
static void bt_pci_attach(pcici_t config_id, int unit);
static struct pci_device bt_pci_driver = {
"bt",
bt_pci_probe,
bt_pci_attach,
&bt_unit,
NULL
};
DATA_SET (pcidevice_set, bt_pci_driver);
static int
btpcideterminebusspace(pcici_t config_id, bus_space_tag_t* tagp,
bus_space_handle_t* bshp)
{
vm_offset_t vaddr;
vm_offset_t paddr;
u_int16_t io_port;
int command;
vaddr = 0;
paddr = 0;
command = pci_cfgread(config_id, PCIR_COMMAND, /*bytes*/1);
/* XXX Memory Mapped I/O seems to cause problems */
#if 0
if ((command & PCIM_CMD_MEMEN) == 0
|| (pci_map_mem(config_id, BT_PCI_MEMADDR, &vaddr, &paddr)) == 0)
#endif
if ((command & PCIM_CMD_PORTEN) == 0
|| (pci_map_port(config_id, BT_PCI_IOADDR, &io_port)) == 0)
return (-1);
if (vaddr != 0) {
*tagp = I386_BUS_SPACE_MEM;
*bshp = vaddr;
} else {
*tagp = I386_BUS_SPACE_IO;
*bshp = io_port;
}
return (0);
}
static char*
bt_pci_probe (pcici_t config_id, pcidi_t type)
{
switch(type) {
case PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER:
case PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC:
{
struct bt_softc *bt;
bus_space_tag_t tag;
bus_space_handle_t bsh;
pci_info_data_t pci_info;
int error;
if (btpcideterminebusspace(config_id, &tag, &bsh) != 0)
break;
bt = bt_alloc(BT_TEMP_UNIT, tag, bsh);
if (bt == NULL)
break;
/*
* Determine if an ISA compatible I/O port has been
* enabled. If so, record the port so it will not
* be probed by our ISA probe. If the PCI I/O port
* was not set to the compatibility port, disable it.
*/
error = bt_cmd(bt, BOP_INQUIRE_PCI_INFO,
/*param*/NULL, /*paramlen*/0,
(u_int8_t*)&pci_info, sizeof(pci_info),
DEFAULT_CMD_TIMEOUT);
if (error == 0
&& pci_info.io_port < BIO_DISABLED) {
bt_mark_probed_bio(pci_info.io_port);
if (bsh != bt_iop_from_bio(pci_info.io_port)) {
u_int8_t new_addr;
new_addr = BIO_DISABLED;
bt_cmd(bt, BOP_MODIFY_IO_ADDR,
/*param*/&new_addr,
/*paramlen*/1, /*reply_buf*/NULL,
/*reply_len*/0,
DEFAULT_CMD_TIMEOUT);
}
}
bt_free(bt);
return ("Buslogic Multi-Master SCSI Host Adapter");
break;
}
default:
break;
}
return (NULL);
}
static void
bt_pci_attach(pcici_t config_id, int unit)
{
struct bt_softc *bt;
bus_space_tag_t tag;
bus_space_handle_t bsh;
int opri;
if (btpcideterminebusspace(config_id, &tag, &bsh) != 0)
return;
if ((bt = bt_alloc(unit, tag, bsh)) == NULL)
return; /* XXX PCI code should take return status */
/* Allocate a dmatag for our CCB DMA maps */
/* XXX Should be a child of the PCI bus dma tag */
if (bus_dma_tag_create(/*parent*/NULL, /*alignemnt*/0, /*boundary*/0,
/*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
/*highaddr*/BUS_SPACE_MAXADDR,
/*filter*/NULL, /*filterarg*/NULL,
/*maxsize*/BUS_SPACE_MAXSIZE_32BIT,
/*nsegments*/BUS_SPACE_UNRESTRICTED,
/*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
/*flags*/0, &bt->parent_dmat) != 0) {
bt_free(bt);
return;
}
if ((pci_map_int(config_id, bt_intr, (void *)bt, &cam_imask)) == 0) {
bt_free(bt);
return;
}
/*
* Protect ourself from spurrious interrupts during
* intialization and attach. We should really rely
* on interrupts during attach, but we don't have
* access to our interrupts during ISA probes, so until
* that changes, we mask our interrupts during attach
* too.
*/
opri = splcam();
if (bt_probe(bt) || bt_fetch_adapter_info(bt) || bt_init(bt)) {
bt_free(bt);
splx(opri);
return; /* XXX PCI code should take return status */
}
bt_attach(bt);
splx(opri);
return;
}
#endif /* NPCI > 0 */