freebsd-dev/sys/dev/mii/micphy.c

299 lines
8.4 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2014 Ruslan Bukin <br@bsdpad.com>
* All rights reserved.
*
* This software was developed by SRI International and the University of
* Cambridge Computer Laboratory under DARPA/AFRL contract (FA8750-10-C-0237)
* ("CTSRD"), as part of the DARPA CRASH research programme.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* Micrel KSZ9021 Gigabit Ethernet Transceiver
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/errno.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/malloc.h>
#include <machine/bus.h>
#include <net/if.h>
#include <net/if_media.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include "miidevs.h"
#include "miibus_if.h"
#include <dev/fdt/fdt_common.h>
#include <dev/ofw/openfirm.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#define MII_KSZPHY_EXTREG 0x0b
#define KSZPHY_EXTREG_WRITE (1 << 15)
#define MII_KSZPHY_EXTREG_WRITE 0x0c
#define MII_KSZPHY_EXTREG_READ 0x0d
#define MII_KSZPHY_CLK_CONTROL_PAD_SKEW 0x104
#define MII_KSZPHY_RX_DATA_PAD_SKEW 0x105
#define MII_KSZPHY_TX_DATA_PAD_SKEW 0x106
/* KSZ9031 */
#define MII_KSZ9031_MMD_ACCESS_CTRL 0x0d
#define MII_KSZ9031_MMD_ACCESS_DATA 0x0e
#define MII_KSZ9031_MMD_DATA_NOINC (1 << 14)
#define MII_KSZ9031_CONTROL_PAD_SKEW 0x4
#define MII_KSZ9031_RX_DATA_PAD_SKEW 0x5
#define MII_KSZ9031_TX_DATA_PAD_SKEW 0x6
#define MII_KSZ9031_CLOCK_PAD_SKEW 0x8
#define PS_TO_REG(p) ((p) / 200)
static int micphy_probe(device_t);
static int micphy_attach(device_t);
static int micphy_service(struct mii_softc *, struct mii_data *, int);
static device_method_t micphy_methods[] = {
/* device interface */
DEVMETHOD(device_probe, micphy_probe),
DEVMETHOD(device_attach, micphy_attach),
DEVMETHOD(device_detach, mii_phy_detach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD_END
};
static devclass_t micphy_devclass;
static driver_t micphy_driver = {
"micphy",
micphy_methods,
sizeof(struct mii_softc)
};
DRIVER_MODULE(micphy, miibus, micphy_driver, micphy_devclass, 0, 0);
static const struct mii_phydesc micphys[] = {
MII_PHY_DESC(MICREL, KSZ9021),
MII_PHY_DESC(MICREL, KSZ9031),
MII_PHY_END
};
static const struct mii_phy_funcs micphy_funcs = {
micphy_service,
ukphy_status,
mii_phy_reset
};
static uint32_t
ksz9031_read(struct mii_softc *sc, uint32_t devaddr, uint32_t reg)
{
/* Set up device address and register. */
PHY_WRITE(sc, MII_KSZ9031_MMD_ACCESS_CTRL, devaddr);
PHY_WRITE(sc, MII_KSZ9031_MMD_ACCESS_DATA, reg);
/* Select register data for MMD and read the value. */
PHY_WRITE(sc, MII_KSZ9031_MMD_ACCESS_CTRL,
MII_KSZ9031_MMD_DATA_NOINC | devaddr);
return (PHY_READ(sc, MII_KSZ9031_MMD_ACCESS_DATA));
}
static void
ksz9031_write(struct mii_softc *sc, uint32_t devaddr, uint32_t reg,
uint32_t val)
{
/* Set up device address and register. */
PHY_WRITE(sc, MII_KSZ9031_MMD_ACCESS_CTRL, devaddr);
PHY_WRITE(sc, MII_KSZ9031_MMD_ACCESS_DATA, reg);
/* Select register data for MMD and write the value. */
PHY_WRITE(sc, MII_KSZ9031_MMD_ACCESS_CTRL,
MII_KSZ9031_MMD_DATA_NOINC | devaddr);
PHY_WRITE(sc, MII_KSZ9031_MMD_ACCESS_DATA, val);
}
static uint32_t
ksz9021_read(struct mii_softc *sc, uint32_t reg)
{
PHY_WRITE(sc, MII_KSZPHY_EXTREG, reg);
return (PHY_READ(sc, MII_KSZPHY_EXTREG_READ));
}
static void
ksz9021_write(struct mii_softc *sc, uint32_t reg, uint32_t val)
{
PHY_WRITE(sc, MII_KSZPHY_EXTREG, KSZPHY_EXTREG_WRITE | reg);
PHY_WRITE(sc, MII_KSZPHY_EXTREG_WRITE, val);
}
static void
ksz90x1_load_values(struct mii_softc *sc, phandle_t node,
uint32_t dev, uint32_t reg, char *field1, uint32_t f1mask, int f1off,
char *field2, uint32_t f2mask, int f2off, char *field3, uint32_t f3mask,
int f3off, char *field4, uint32_t f4mask, int f4off)
{
pcell_t dts_value[1];
int len;
int val;
if (sc->mii_mpd_model == MII_MODEL_MICREL_KSZ9031)
val = ksz9031_read(sc, dev, reg);
else
val = ksz9021_read(sc, reg);
if ((len = OF_getproplen(node, field1)) > 0) {
OF_getencprop(node, field1, dts_value, len);
val &= ~(f1mask << f1off);
val |= (PS_TO_REG(dts_value[0]) & f1mask) << f1off;
}
if (field2 != NULL && (len = OF_getproplen(node, field2)) > 0) {
OF_getencprop(node, field2, dts_value, len);
val &= ~(f2mask << f2off);
val |= (PS_TO_REG(dts_value[0]) & f2mask) << f2off;
}
if (field3 != NULL && (len = OF_getproplen(node, field3)) > 0) {
OF_getencprop(node, field3, dts_value, len);
val &= ~(f3mask << f3off);
val |= (PS_TO_REG(dts_value[0]) & f3mask) << f3off;
}
if (field4 != NULL && (len = OF_getproplen(node, field4)) > 0) {
OF_getencprop(node, field4, dts_value, len);
val &= ~(f4mask << f4off);
val |= (PS_TO_REG(dts_value[0]) & f4mask) << f4off;
}
if (sc->mii_mpd_model == MII_MODEL_MICREL_KSZ9031)
ksz9031_write(sc, dev, reg, val);
else
ksz9021_write(sc, reg, val);
}
static void
ksz9031_load_values(struct mii_softc *sc, phandle_t node)
{
ksz90x1_load_values(sc, node, 2, MII_KSZ9031_CONTROL_PAD_SKEW,
"txen-skew-ps", 0xf, 0, "rxdv-skew-ps", 0xf, 4,
NULL, 0, 0, NULL, 0, 0);
ksz90x1_load_values(sc, node, 2, MII_KSZ9031_RX_DATA_PAD_SKEW,
"rxd0-skew-ps", 0xf, 0, "rxd1-skew-ps", 0xf, 4,
"rxd2-skew-ps", 0xf, 8, "rxd3-skew-ps", 0xf, 12);
ksz90x1_load_values(sc, node, 2, MII_KSZ9031_TX_DATA_PAD_SKEW,
"txd0-skew-ps", 0xf, 0, "txd1-skew-ps", 0xf, 4,
"txd2-skew-ps", 0xf, 8, "txd3-skew-ps", 0xf, 12);
ksz90x1_load_values(sc, node, 2, MII_KSZ9031_CLOCK_PAD_SKEW,
"rxc-skew-ps", 0x1f, 0, "txc-skew-ps", 0x1f, 5,
NULL, 0, 0, NULL, 0, 0);
}
static void
ksz9021_load_values(struct mii_softc *sc, phandle_t node)
{
ksz90x1_load_values(sc, node, 0, MII_KSZPHY_CLK_CONTROL_PAD_SKEW,
"txen-skew-ps", 0xf, 0, "txc-skew-ps", 0xf, 4,
"rxdv-skew-ps", 0xf, 8, "rxc-skew-ps", 0xf, 12);
ksz90x1_load_values(sc, node, 0, MII_KSZPHY_RX_DATA_PAD_SKEW,
"rxd0-skew-ps", 0xf, 0, "rxd1-skew-ps", 0xf, 4,
"rxd2-skew-ps", 0xf, 8, "rxd3-skew-ps", 0xf, 12);
ksz90x1_load_values(sc, node, 0, MII_KSZPHY_TX_DATA_PAD_SKEW,
"txd0-skew-ps", 0xf, 0, "txd1-skew-ps", 0xf, 4,
"txd2-skew-ps", 0xf, 8, "txd3-skew-ps", 0xf, 12);
}
static int
micphy_probe(device_t dev)
{
return (mii_phy_dev_probe(dev, micphys, BUS_PROBE_DEFAULT));
}
static int
micphy_attach(device_t dev)
{
struct mii_softc *sc;
phandle_t node;
device_t miibus;
device_t parent;
sc = device_get_softc(dev);
mii_phy_dev_attach(dev, MIIF_NOMANPAUSE, &micphy_funcs, 1);
mii_phy_setmedia(sc);
miibus = device_get_parent(dev);
parent = device_get_parent(miibus);
if ((node = ofw_bus_get_node(parent)) == -1)
return (ENXIO);
if (sc->mii_mpd_model == MII_MODEL_MICREL_KSZ9031)
ksz9031_load_values(sc, node);
else
ksz9021_load_values(sc, node);
return (0);
}
static int
micphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
{
switch (cmd) {
case MII_POLLSTAT:
break;
case MII_MEDIACHG:
mii_phy_setmedia(sc);
break;
case MII_TICK:
if (mii_phy_tick(sc) == EJUSTRETURN)
return (0);
break;
}
/* Update the media status. */
PHY_STATUS(sc);
/* Callback if something changed. */
mii_phy_update(sc, cmd);
return (0);
}