freebsd-dev/sys/dev/netmap/if_vtnet_netmap.h

435 lines
13 KiB
C
Raw Normal View History

Update to the current version of netmap. Mostly bugfixes or features developed in the past 6 months, so this is a 10.1 candidate. Basically no user API changes (some bugfixes in sys/net/netmap_user.h). In detail: 1. netmap support for virtio-net, including in netmap mode. Under bhyve and with a netmap backend [2] we reach over 1Mpps with standard APIs (e.g. libpcap), and 5-8 Mpps in netmap mode. 2. (kernel) add support for multiple memory allocators, so we can better partition physical and virtual interfaces giving access to separate users. The most visible effect is one additional argument to the various kernel functions to compute buffer addresses. All netmap-supported drivers are affected, but changes are mechanical and trivial 3. (kernel) simplify the prototype for *txsync() and *rxsync() driver methods. All netmap drivers affected, changes mostly mechanical. 4. add support for netmap-monitor ports. Think of it as a mirroring port on a physical switch: a netmap monitor port replicates traffic present on the main port. Restrictions apply. Drive carefully. 5. if_lem.c: support for various paravirtualization features, experimental and disabled by default. Most of these are described in our ANCS'13 paper [1]. Paravirtualized support in netmap mode is new, and beats the numbers in the paper by a large factor (under qemu-kvm, we measured gues-host throughput up to 10-12 Mpps). A lot of refactoring and additional documentation in the files in sys/dev/netmap, but apart from #2 and #3 above, almost nothing of this stuff is visible to other kernel parts. Example programs in tools/tools/netmap have been updated with bugfixes and to support more of the existing features. This is meant to go into 10.1 so we plan an MFC before the Aug.22 deadline. A lot of this code has been contributed by my colleagues at UNIPI, including Giuseppe Lettieri, Vincenzo Maffione, Stefano Garzarella. MFC after: 3 days.
2014-08-16 15:00:01 +00:00
/*
* Copyright (C) 2014 Vincenzo Maffione, Luigi Rizzo. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* $FreeBSD$
*/
#include <net/netmap.h>
#include <sys/selinfo.h>
#include <vm/vm.h>
#include <vm/pmap.h> /* vtophys ? */
#include <dev/netmap/netmap_kern.h>
#define SOFTC_T vtnet_softc
/* Free all the unused buffer in all the RX virtqueues.
* This function is called when entering and exiting netmap mode.
* - buffers queued by the virtio driver return skbuf/mbuf pointer
* and need to be freed;
* - buffers queued by netmap return the txq/rxq, and do not need work
*/
static void
Update to the current version of netmap. Mostly bugfixes or features developed in the past 6 months, so this is a 10.1 candidate. Basically no user API changes (some bugfixes in sys/net/netmap_user.h). In detail: 1. netmap support for virtio-net, including in netmap mode. Under bhyve and with a netmap backend [2] we reach over 1Mpps with standard APIs (e.g. libpcap), and 5-8 Mpps in netmap mode. 2. (kernel) add support for multiple memory allocators, so we can better partition physical and virtual interfaces giving access to separate users. The most visible effect is one additional argument to the various kernel functions to compute buffer addresses. All netmap-supported drivers are affected, but changes are mechanical and trivial 3. (kernel) simplify the prototype for *txsync() and *rxsync() driver methods. All netmap drivers affected, changes mostly mechanical. 4. add support for netmap-monitor ports. Think of it as a mirroring port on a physical switch: a netmap monitor port replicates traffic present on the main port. Restrictions apply. Drive carefully. 5. if_lem.c: support for various paravirtualization features, experimental and disabled by default. Most of these are described in our ANCS'13 paper [1]. Paravirtualized support in netmap mode is new, and beats the numbers in the paper by a large factor (under qemu-kvm, we measured gues-host throughput up to 10-12 Mpps). A lot of refactoring and additional documentation in the files in sys/dev/netmap, but apart from #2 and #3 above, almost nothing of this stuff is visible to other kernel parts. Example programs in tools/tools/netmap have been updated with bugfixes and to support more of the existing features. This is meant to go into 10.1 so we plan an MFC before the Aug.22 deadline. A lot of this code has been contributed by my colleagues at UNIPI, including Giuseppe Lettieri, Vincenzo Maffione, Stefano Garzarella. MFC after: 3 days.
2014-08-16 15:00:01 +00:00
vtnet_netmap_free_bufs(struct SOFTC_T* sc)
{
int i, nmb = 0, n = 0, last;
for (i = 0; i < sc->vtnet_max_vq_pairs; i++) {
struct vtnet_rxq *rxq = &sc->vtnet_rxqs[i];
struct virtqueue *vq;
struct mbuf *m;
struct vtnet_txq *txq = &sc->vtnet_txqs[i];
struct vtnet_tx_header *txhdr;
last = 0;
vq = rxq->vtnrx_vq;
while ((m = virtqueue_drain(vq, &last)) != NULL) {
n++;
if (m != (void *)rxq)
m_freem(m);
else
nmb++;
}
last = 0;
vq = txq->vtntx_vq;
while ((txhdr = virtqueue_drain(vq, &last)) != NULL) {
n++;
if (txhdr != (void *)txq) {
m_freem(txhdr->vth_mbuf);
uma_zfree(vtnet_tx_header_zone, txhdr);
} else
nmb++;
}
}
D("freed %d mbufs, %d netmap bufs on %d queues",
n - nmb, nmb, i);
}
/* Register and unregister. */
static int
Update to the current version of netmap. Mostly bugfixes or features developed in the past 6 months, so this is a 10.1 candidate. Basically no user API changes (some bugfixes in sys/net/netmap_user.h). In detail: 1. netmap support for virtio-net, including in netmap mode. Under bhyve and with a netmap backend [2] we reach over 1Mpps with standard APIs (e.g. libpcap), and 5-8 Mpps in netmap mode. 2. (kernel) add support for multiple memory allocators, so we can better partition physical and virtual interfaces giving access to separate users. The most visible effect is one additional argument to the various kernel functions to compute buffer addresses. All netmap-supported drivers are affected, but changes are mechanical and trivial 3. (kernel) simplify the prototype for *txsync() and *rxsync() driver methods. All netmap drivers affected, changes mostly mechanical. 4. add support for netmap-monitor ports. Think of it as a mirroring port on a physical switch: a netmap monitor port replicates traffic present on the main port. Restrictions apply. Drive carefully. 5. if_lem.c: support for various paravirtualization features, experimental and disabled by default. Most of these are described in our ANCS'13 paper [1]. Paravirtualized support in netmap mode is new, and beats the numbers in the paper by a large factor (under qemu-kvm, we measured gues-host throughput up to 10-12 Mpps). A lot of refactoring and additional documentation in the files in sys/dev/netmap, but apart from #2 and #3 above, almost nothing of this stuff is visible to other kernel parts. Example programs in tools/tools/netmap have been updated with bugfixes and to support more of the existing features. This is meant to go into 10.1 so we plan an MFC before the Aug.22 deadline. A lot of this code has been contributed by my colleagues at UNIPI, including Giuseppe Lettieri, Vincenzo Maffione, Stefano Garzarella. MFC after: 3 days.
2014-08-16 15:00:01 +00:00
vtnet_netmap_reg(struct netmap_adapter *na, int onoff)
{
struct ifnet *ifp = na->ifp;
struct SOFTC_T *sc = ifp->if_softc;
VTNET_CORE_LOCK(sc);
ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
/* enable or disable flags and callbacks in na and ifp */
if (onoff) {
nm_set_native_flags(na);
} else {
nm_clear_native_flags(na);
}
/* drain queues so netmap and native drivers
* do not interfere with each other
*/
vtnet_netmap_free_bufs(sc);
vtnet_init_locked(sc); /* also enable intr */
VTNET_CORE_UNLOCK(sc);
return (ifp->if_drv_flags & IFF_DRV_RUNNING ? 0 : 1);
}
/* Reconcile kernel and user view of the transmit ring. */
static int
vtnet_netmap_txsync(struct netmap_kring *kring, int flags)
{
struct netmap_adapter *na = kring->na;
struct ifnet *ifp = na->ifp;
struct netmap_ring *ring = kring->ring;
u_int ring_nr = kring->ring_id;
u_int nm_i; /* index into the netmap ring */
u_int nic_i; /* index into the NIC ring */
u_int n;
u_int const lim = kring->nkr_num_slots - 1;
u_int const head = kring->rhead;
/* device-specific */
struct SOFTC_T *sc = ifp->if_softc;
struct vtnet_txq *txq = &sc->vtnet_txqs[ring_nr];
struct virtqueue *vq = txq->vtntx_vq;
/*
* First part: process new packets to send.
*/
rmb();
nm_i = kring->nr_hwcur;
if (nm_i != head) { /* we have new packets to send */
struct sglist *sg = txq->vtntx_sg;
nic_i = netmap_idx_k2n(kring, nm_i);
for (n = 0; nm_i != head; n++) {
/* we use an empty header here */
static struct virtio_net_hdr_mrg_rxbuf hdr;
struct netmap_slot *slot = &ring->slot[nm_i];
u_int len = slot->len;
uint64_t paddr;
void *addr = PNMB(na, slot, &paddr);
int err;
NM_CHECK_ADDR_LEN(na, addr, len);
slot->flags &= ~(NS_REPORT | NS_BUF_CHANGED);
/* Initialize the scatterlist, expose it to the hypervisor,
* and kick the hypervisor (if necessary).
*/
sglist_reset(sg); // cheap
// if vtnet_hdr_size > 0 ...
err = sglist_append(sg, &hdr, sc->vtnet_hdr_size);
// XXX later, support multi segment
err = sglist_append_phys(sg, paddr, len);
/* use na as the cookie */
err = virtqueue_enqueue(vq, txq, sg, sg->sg_nseg, 0);
if (unlikely(err < 0)) {
D("virtqueue_enqueue failed");
break;
}
nm_i = nm_next(nm_i, lim);
nic_i = nm_next(nic_i, lim);
}
/* Update hwcur depending on where we stopped. */
kring->nr_hwcur = nm_i; /* note we migth break early */
/* No more free TX slots? Ask the hypervisor for notifications,
* possibly only when a considerable amount of work has been
* done.
*/
ND(3,"sent %d packets, hwcur %d", n, nm_i);
virtqueue_disable_intr(vq);
virtqueue_notify(vq);
} else {
if (ring->head != ring->tail)
ND(5, "pure notify ? head %d tail %d nused %d %d",
ring->head, ring->tail, virtqueue_nused(vq),
(virtqueue_dump(vq), 1));
virtqueue_notify(vq);
virtqueue_enable_intr(vq); // like postpone with 0
}
/* Free used slots. We only consider our own used buffers, recognized
* by the token we passed to virtqueue_add_outbuf.
*/
n = 0;
for (;;) {
struct vtnet_tx_header *txhdr = virtqueue_dequeue(vq, NULL);
if (txhdr == NULL)
break;
if (likely(txhdr == (void *)txq)) {
n++;
if (virtqueue_nused(vq) < 32) { // XXX slow release
break;
}
} else { /* leftover from previous transmission */
m_freem(txhdr->vth_mbuf);
uma_zfree(vtnet_tx_header_zone, txhdr);
}
}
if (n) {
kring->nr_hwtail += n;
if (kring->nr_hwtail > lim)
kring->nr_hwtail -= lim + 1;
}
if (nm_i != kring->nr_hwtail /* && vtnet_txq_below_threshold(txq) == 0*/) {
ND(3, "disable intr, hwcur %d", nm_i);
virtqueue_disable_intr(vq);
} else {
ND(3, "enable intr, hwcur %d", nm_i);
virtqueue_postpone_intr(vq, VQ_POSTPONE_SHORT);
}
//out:
nm_txsync_finalize(kring);
return 0;
}
static int
vtnet_refill_rxq(struct netmap_kring *kring, u_int nm_i, u_int head)
{
struct netmap_adapter *na = kring->na;
struct ifnet *ifp = na->ifp;
struct netmap_ring *ring = kring->ring;
u_int ring_nr = kring->ring_id;
u_int const lim = kring->nkr_num_slots - 1;
u_int n;
/* device-specific */
struct SOFTC_T *sc = ifp->if_softc;
struct vtnet_rxq *rxq = &sc->vtnet_rxqs[ring_nr];
struct virtqueue *vq = rxq->vtnrx_vq;
/* use a local sglist, default might be short */
struct sglist_seg ss[2];
struct sglist sg = { ss, 0, 0, 2 };
Update to the current version of netmap. Mostly bugfixes or features developed in the past 6 months, so this is a 10.1 candidate. Basically no user API changes (some bugfixes in sys/net/netmap_user.h). In detail: 1. netmap support for virtio-net, including in netmap mode. Under bhyve and with a netmap backend [2] we reach over 1Mpps with standard APIs (e.g. libpcap), and 5-8 Mpps in netmap mode. 2. (kernel) add support for multiple memory allocators, so we can better partition physical and virtual interfaces giving access to separate users. The most visible effect is one additional argument to the various kernel functions to compute buffer addresses. All netmap-supported drivers are affected, but changes are mechanical and trivial 3. (kernel) simplify the prototype for *txsync() and *rxsync() driver methods. All netmap drivers affected, changes mostly mechanical. 4. add support for netmap-monitor ports. Think of it as a mirroring port on a physical switch: a netmap monitor port replicates traffic present on the main port. Restrictions apply. Drive carefully. 5. if_lem.c: support for various paravirtualization features, experimental and disabled by default. Most of these are described in our ANCS'13 paper [1]. Paravirtualized support in netmap mode is new, and beats the numbers in the paper by a large factor (under qemu-kvm, we measured gues-host throughput up to 10-12 Mpps). A lot of refactoring and additional documentation in the files in sys/dev/netmap, but apart from #2 and #3 above, almost nothing of this stuff is visible to other kernel parts. Example programs in tools/tools/netmap have been updated with bugfixes and to support more of the existing features. This is meant to go into 10.1 so we plan an MFC before the Aug.22 deadline. A lot of this code has been contributed by my colleagues at UNIPI, including Giuseppe Lettieri, Vincenzo Maffione, Stefano Garzarella. MFC after: 3 days.
2014-08-16 15:00:01 +00:00
for (n = 0; nm_i != head; n++) {
static struct virtio_net_hdr_mrg_rxbuf hdr;
struct netmap_slot *slot = &ring->slot[nm_i];
uint64_t paddr;
void *addr = PNMB(na, slot, &paddr);
int err = 0;
if (addr == NETMAP_BUF_BASE(na)) { /* bad buf */
if (netmap_ring_reinit(kring))
return -1;
}
slot->flags &= ~NS_BUF_CHANGED;
sglist_reset(&sg); // cheap
err = sglist_append(&sg, &hdr, sc->vtnet_hdr_size);
err = sglist_append_phys(&sg, paddr, NETMAP_BUF_SIZE(na));
Update to the current version of netmap. Mostly bugfixes or features developed in the past 6 months, so this is a 10.1 candidate. Basically no user API changes (some bugfixes in sys/net/netmap_user.h). In detail: 1. netmap support for virtio-net, including in netmap mode. Under bhyve and with a netmap backend [2] we reach over 1Mpps with standard APIs (e.g. libpcap), and 5-8 Mpps in netmap mode. 2. (kernel) add support for multiple memory allocators, so we can better partition physical and virtual interfaces giving access to separate users. The most visible effect is one additional argument to the various kernel functions to compute buffer addresses. All netmap-supported drivers are affected, but changes are mechanical and trivial 3. (kernel) simplify the prototype for *txsync() and *rxsync() driver methods. All netmap drivers affected, changes mostly mechanical. 4. add support for netmap-monitor ports. Think of it as a mirroring port on a physical switch: a netmap monitor port replicates traffic present on the main port. Restrictions apply. Drive carefully. 5. if_lem.c: support for various paravirtualization features, experimental and disabled by default. Most of these are described in our ANCS'13 paper [1]. Paravirtualized support in netmap mode is new, and beats the numbers in the paper by a large factor (under qemu-kvm, we measured gues-host throughput up to 10-12 Mpps). A lot of refactoring and additional documentation in the files in sys/dev/netmap, but apart from #2 and #3 above, almost nothing of this stuff is visible to other kernel parts. Example programs in tools/tools/netmap have been updated with bugfixes and to support more of the existing features. This is meant to go into 10.1 so we plan an MFC before the Aug.22 deadline. A lot of this code has been contributed by my colleagues at UNIPI, including Giuseppe Lettieri, Vincenzo Maffione, Stefano Garzarella. MFC after: 3 days.
2014-08-16 15:00:01 +00:00
/* writable for the host */
err = virtqueue_enqueue(vq, rxq, &sg, 0, sg.sg_nseg);
Update to the current version of netmap. Mostly bugfixes or features developed in the past 6 months, so this is a 10.1 candidate. Basically no user API changes (some bugfixes in sys/net/netmap_user.h). In detail: 1. netmap support for virtio-net, including in netmap mode. Under bhyve and with a netmap backend [2] we reach over 1Mpps with standard APIs (e.g. libpcap), and 5-8 Mpps in netmap mode. 2. (kernel) add support for multiple memory allocators, so we can better partition physical and virtual interfaces giving access to separate users. The most visible effect is one additional argument to the various kernel functions to compute buffer addresses. All netmap-supported drivers are affected, but changes are mechanical and trivial 3. (kernel) simplify the prototype for *txsync() and *rxsync() driver methods. All netmap drivers affected, changes mostly mechanical. 4. add support for netmap-monitor ports. Think of it as a mirroring port on a physical switch: a netmap monitor port replicates traffic present on the main port. Restrictions apply. Drive carefully. 5. if_lem.c: support for various paravirtualization features, experimental and disabled by default. Most of these are described in our ANCS'13 paper [1]. Paravirtualized support in netmap mode is new, and beats the numbers in the paper by a large factor (under qemu-kvm, we measured gues-host throughput up to 10-12 Mpps). A lot of refactoring and additional documentation in the files in sys/dev/netmap, but apart from #2 and #3 above, almost nothing of this stuff is visible to other kernel parts. Example programs in tools/tools/netmap have been updated with bugfixes and to support more of the existing features. This is meant to go into 10.1 so we plan an MFC before the Aug.22 deadline. A lot of this code has been contributed by my colleagues at UNIPI, including Giuseppe Lettieri, Vincenzo Maffione, Stefano Garzarella. MFC after: 3 days.
2014-08-16 15:00:01 +00:00
if (err < 0) {
D("virtqueue_enqueue failed");
break;
}
nm_i = nm_next(nm_i, lim);
}
return nm_i;
}
/* Reconcile kernel and user view of the receive ring. */
static int
vtnet_netmap_rxsync(struct netmap_kring *kring, int flags)
{
struct netmap_adapter *na = kring->na;
struct ifnet *ifp = na->ifp;
struct netmap_ring *ring = kring->ring;
u_int ring_nr = kring->ring_id;
u_int nm_i; /* index into the netmap ring */
// u_int nic_i; /* index into the NIC ring */
u_int n;
u_int const lim = kring->nkr_num_slots - 1;
u_int const head = nm_rxsync_prologue(kring);
int force_update = (flags & NAF_FORCE_READ) || kring->nr_kflags & NKR_PENDINTR;
/* device-specific */
struct SOFTC_T *sc = ifp->if_softc;
struct vtnet_rxq *rxq = &sc->vtnet_rxqs[ring_nr];
struct virtqueue *vq = rxq->vtnrx_vq;
/* XXX netif_carrier_ok ? */
if (head > lim)
return netmap_ring_reinit(kring);
rmb();
/*
* First part: import newly received packets.
* Only accept our
* own buffers (matching the token). We should only get
* matching buffers, because of vtnet_netmap_free_rx_unused_bufs()
* and vtnet_netmap_init_buffers().
*/
if (netmap_no_pendintr || force_update) {
uint16_t slot_flags = kring->nkr_slot_flags;
struct netmap_adapter *token;
nm_i = kring->nr_hwtail;
n = 0;
for (;;) {
int len;
token = virtqueue_dequeue(vq, &len);
if (token == NULL)
break;
if (likely(token == (void *)rxq)) {
ring->slot[nm_i].len = len;
ring->slot[nm_i].flags = slot_flags;
nm_i = nm_next(nm_i, lim);
n++;
} else {
D("This should not happen");
}
}
kring->nr_hwtail = nm_i;
kring->nr_kflags &= ~NKR_PENDINTR;
}
ND("[B] h %d c %d hwcur %d hwtail %d",
ring->head, ring->cur, kring->nr_hwcur,
kring->nr_hwtail);
/*
* Second part: skip past packets that userspace has released.
*/
nm_i = kring->nr_hwcur; /* netmap ring index */
if (nm_i != head) {
int err = vtnet_refill_rxq(kring, nm_i, head);
if (err < 0)
return 1;
kring->nr_hwcur = err;
virtqueue_notify(vq);
/* After draining the queue may need an intr from the hypervisor */
vtnet_rxq_enable_intr(rxq);
}
/* tell userspace that there might be new packets. */
nm_rxsync_finalize(kring);
ND("[C] h %d c %d t %d hwcur %d hwtail %d",
ring->head, ring->cur, ring->tail,
kring->nr_hwcur, kring->nr_hwtail);
return 0;
}
/* Make RX virtqueues buffers pointing to netmap buffers. */
static int
vtnet_netmap_init_rx_buffers(struct SOFTC_T *sc)
{
struct ifnet *ifp = sc->vtnet_ifp;
struct netmap_adapter* na = NA(ifp);
unsigned int r;
if (!nm_native_on(na))
return 0;
for (r = 0; r < na->num_rx_rings; r++) {
struct netmap_kring *kring = &na->rx_rings[r];
struct vtnet_rxq *rxq = &sc->vtnet_rxqs[r];
struct virtqueue *vq = rxq->vtnrx_vq;
struct netmap_slot* slot;
int err = 0;
slot = netmap_reset(na, NR_RX, r, 0);
if (!slot) {
D("strange, null netmap ring %d", r);
return 0;
}
/* Add up to na>-num_rx_desc-1 buffers to this RX virtqueue.
* It's important to leave one virtqueue slot free, otherwise
* we can run into ring->cur/ring->tail wraparounds.
*/
err = vtnet_refill_rxq(kring, 0, na->num_rx_desc-1);
if (err < 0)
return 0;
virtqueue_notify(vq);
}
return 1;
}
/* Update the virtio-net device configurations. Number of queues can
* change dinamically, by 'ethtool --set-channels $IFNAME combined $N'.
* This is actually the only way virtio-net can currently enable
* the multiqueue mode.
* XXX note that we seem to lose packets if the netmap ring has more
* slots than the queue
*/
static int
vtnet_netmap_config(struct netmap_adapter *na, u_int *txr, u_int *txd,
u_int *rxr, u_int *rxd)
{
struct ifnet *ifp = na->ifp;
struct SOFTC_T *sc = ifp->if_softc;
*txr = *rxr = sc->vtnet_max_vq_pairs;
*rxd = 512; // sc->vtnet_rx_nmbufs;
*txd = *rxd; // XXX
D("vtnet config txq=%d, txd=%d rxq=%d, rxd=%d",
*txr, *txd, *rxr, *rxd);
return 0;
}
static void
vtnet_netmap_attach(struct SOFTC_T *sc)
{
struct netmap_adapter na;
bzero(&na, sizeof(na));
na.ifp = sc->vtnet_ifp;
na.num_tx_desc = 1024;// sc->vtnet_rx_nmbufs;
na.num_rx_desc = 1024; // sc->vtnet_rx_nmbufs;
na.nm_register = vtnet_netmap_reg;
na.nm_txsync = vtnet_netmap_txsync;
na.nm_rxsync = vtnet_netmap_rxsync;
na.nm_config = vtnet_netmap_config;
na.num_tx_rings = na.num_rx_rings = sc->vtnet_max_vq_pairs;
D("max rings %d", sc->vtnet_max_vq_pairs);
netmap_attach(&na);
D("virtio attached txq=%d, txd=%d rxq=%d, rxd=%d",
na.num_tx_rings, na.num_tx_desc,
na.num_tx_rings, na.num_rx_desc);
}
/* end of file */