d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
627457cd4a
freebsd-dev/sys/ddb/ddb.h

172 lines
5.6 KiB
C
Raw Normal View History

Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
/*-
* Copyright (c) 1993, Garrett A. Wollman.
* Copyright (c) 1993, University of Vermont and State Agricultural College.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
$Id$ -> $FreeBSD$
1999-08-28 01:08:13 +00:00
* $FreeBSD$
Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
*/
/*
* Necessary declarations for the `ddb' kernel debugger.
*/
Completed function declarations and/or added prototypes. Removed `extern' from prototypes. Sorted prototypes. Uniformized idempotency ifdefs.
1995-11-24 13:53:05 +00:00
#ifndef _DDB_DDB_H_
#define _DDB_DDB_H_
Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
#include <machine/db_machdep.h> /* type definitions */
Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
Implement functions calls from within DDB on ia64. On ia64 a function pointer doesn't point to the first instruction of that function, but rather to a descriptor. The descriptor has the address of the first instruction, as well as the value of the global pointer. The symbol table doesn't know anything about descriptors, so if you lookup the name of a function you get the address of the first instruction. The cast from the address, which is the result of the symbol lookup, to a function pointer as is done in db_fncall is therefore invalid. Abstract this detail behind the DB_CALL macro. By default DB_CALL is defined as db_fncall_generic, which yields the old behaviour. On ia64 the macro is defined as db_fncall_ia64, in which a descriptor is constructed to yield a valid function pointer. While here, introduce DB_MAXARGS. DB_MAXARGS replaces the existing (local) MAXARGS. The DB_MAXARGS macro can be defined by platforms to create a convenient maximum. By default this will be the legacy 10. On ia64 we define this macro to be 8, for 8 is the maximum number of arguments that can be passed in registers. This avoids having to implement spilling of arguments on the memory stack. Approved by: re (dwhite)
2005-07-02 23:52:37 +00:00
#ifndef DB_MAXARGS
#define DB_MAXARGS 10
#endif
#ifndef DB_CALL
#define DB_CALL db_fncall_generic
#else
int DB_CALL(db_expr_t, db_expr_t *, int, db_expr_t[]);
#endif
Fixed some style bugs in the removal of __P(()). Continuation lines were not outdented to preserve non-KNF lining up of code with parentheses. Switch to KNF formatting.
2002-03-23 11:53:03 +00:00
typedef void db_cmdfcn_t(db_expr_t addr, boolean_t have_addr, db_expr_t count,
char *modif);
Completed function declarations and/or added prototypes. Removed `extern' from prototypes. Sorted prototypes. Uniformized idempotency ifdefs.
1995-11-24 13:53:05 +00:00
Support statically attaching of ddb commands in non-ddb modules. The details are hidden in the DB_COMMAND(cmd_name, func_name) and DB_SHOW_COMMAND(cmd_name, func_name) macros. DB_COMMAND() adds to the top-level ddb command table and DB_SHOW_COMMAND adds to the `show' subtable. Most external commands will probably be `show' commands with no side effects. They should check their pointer args more carefully than `show map' :-), or ddb should trap internal faults better (like it does for memory accesses). The vm ddb commands are temporarily unattached. ddb.h: Also declare `db_indent' and db_iprintf() which will replace vm's `indent' and iprintf().
1996-09-14 09:13:15 +00:00
#define DB_COMMAND(cmd_name, func_name) \
Clean up the way we handle auxiliary commands for a given ddb command table. Previously, the ddb code knew of each linker set of auxiliary commands and which explicit command list they were tied to. These changes add a simple command_table struct that contains both the static list of commands and the pointers for any auxiliary linker set of additional commands. This also makes it possible for other arbitrary command tables to be defined in other parts of the kernel w/o having to edit ddb itself. The DB_SET macro has also been trimmed down to just creating an entry in a linker set. A new DB_FUNC macro does what the old DB_SET did which is to not only add an entry to the linker set but also to include a function prototype for the function being added. With these changes, it's now also possible to create aliases for ddb functions using DB_SET() directly if desired.
2006-03-07 22:17:06 +00:00
DB_FUNC(cmd_name, func_name, db_cmd_set, 0, NULL)
Support statically attaching of ddb commands in non-ddb modules. The details are hidden in the DB_COMMAND(cmd_name, func_name) and DB_SHOW_COMMAND(cmd_name, func_name) macros. DB_COMMAND() adds to the top-level ddb command table and DB_SHOW_COMMAND adds to the `show' subtable. Most external commands will probably be `show' commands with no side effects. They should check their pointer args more carefully than `show map' :-), or ddb should trap internal faults better (like it does for memory accesses). The vm ddb commands are temporarily unattached. ddb.h: Also declare `db_indent' and db_iprintf() which will replace vm's `indent' and iprintf().
1996-09-14 09:13:15 +00:00
#define DB_SHOW_COMMAND(cmd_name, func_name) \
Clean up the way we handle auxiliary commands for a given ddb command table. Previously, the ddb code knew of each linker set of auxiliary commands and which explicit command list they were tied to. These changes add a simple command_table struct that contains both the static list of commands and the pointers for any auxiliary linker set of additional commands. This also makes it possible for other arbitrary command tables to be defined in other parts of the kernel w/o having to edit ddb itself. The DB_SET macro has also been trimmed down to just creating an entry in a linker set. A new DB_FUNC macro does what the old DB_SET did which is to not only add an entry to the linker set but also to include a function prototype for the function being added. With these changes, it's now also possible to create aliases for ddb functions using DB_SET() directly if desired.
2006-03-07 22:17:06 +00:00
DB_FUNC(cmd_name, func_name, db_show_cmd_set, 0, NULL)
Support statically attaching of ddb commands in non-ddb modules. The details are hidden in the DB_COMMAND(cmd_name, func_name) and DB_SHOW_COMMAND(cmd_name, func_name) macros. DB_COMMAND() adds to the top-level ddb command table and DB_SHOW_COMMAND adds to the `show' subtable. Most external commands will probably be `show' commands with no side effects. They should check their pointer args more carefully than `show map' :-), or ddb should trap internal faults better (like it does for memory accesses). The vm ddb commands are temporarily unattached. ddb.h: Also declare `db_indent' and db_iprintf() which will replace vm's `indent' and iprintf().
1996-09-14 09:13:15 +00:00
Clean up the way we handle auxiliary commands for a given ddb command table. Previously, the ddb code knew of each linker set of auxiliary commands and which explicit command list they were tied to. These changes add a simple command_table struct that contains both the static list of commands and the pointers for any auxiliary linker set of additional commands. This also makes it possible for other arbitrary command tables to be defined in other parts of the kernel w/o having to edit ddb itself. The DB_SET macro has also been trimmed down to just creating an entry in a linker set. A new DB_FUNC macro does what the old DB_SET did which is to not only add an entry to the linker set but also to include a function prototype for the function being added. With these changes, it's now also possible to create aliases for ddb functions using DB_SET() directly if desired.
2006-03-07 22:17:06 +00:00
#define DB_SET(cmd_name, func_name, set, flag, more) \
static const struct command __CONCAT(cmd_name,_cmd) = { \
Support statically attaching of ddb commands in non-ddb modules. The details are hidden in the DB_COMMAND(cmd_name, func_name) and DB_SHOW_COMMAND(cmd_name, func_name) macros. DB_COMMAND() adds to the top-level ddb command table and DB_SHOW_COMMAND adds to the `show' subtable. Most external commands will probably be `show' commands with no side effects. They should check their pointer args more carefully than `show map' :-), or ddb should trap internal faults better (like it does for memory accesses). The vm ddb commands are temporarily unattached. ddb.h: Also declare `db_indent' and db_iprintf() which will replace vm's `indent' and iprintf().
1996-09-14 09:13:15 +00:00
__STRING(cmd_name), \
func_name, \
Allow DB_SET() to set all fields in the ddb command structure. This allows external ddb commands to do anyting an internal command can do, including non-standard argument parsing if desired.
2002-06-05 19:00:02 +00:00
flag, \
more \
Support statically attaching of ddb commands in non-ddb modules. The details are hidden in the DB_COMMAND(cmd_name, func_name) and DB_SHOW_COMMAND(cmd_name, func_name) macros. DB_COMMAND() adds to the top-level ddb command table and DB_SHOW_COMMAND adds to the `show' subtable. Most external commands will probably be `show' commands with no side effects. They should check their pointer args more carefully than `show map' :-), or ddb should trap internal faults better (like it does for memory accesses). The vm ddb commands are temporarily unattached. ddb.h: Also declare `db_indent' and db_iprintf() which will replace vm's `indent' and iprintf().
1996-09-14 09:13:15 +00:00
}; \
Clean up the way we handle auxiliary commands for a given ddb command table. Previously, the ddb code knew of each linker set of auxiliary commands and which explicit command list they were tied to. These changes add a simple command_table struct that contains both the static list of commands and the pointers for any auxiliary linker set of additional commands. This also makes it possible for other arbitrary command tables to be defined in other parts of the kernel w/o having to edit ddb itself. The DB_SET macro has also been trimmed down to just creating an entry in a linker set. A new DB_FUNC macro does what the old DB_SET did which is to not only add an entry to the linker set but also to include a function prototype for the function being added. With these changes, it's now also possible to create aliases for ddb functions using DB_SET() directly if desired.
2006-03-07 22:17:06 +00:00
TEXT_SET(set, __CONCAT(cmd_name,_cmd))
#define DB_FUNC(cmd_name, func_name, set, flag, more) \
static db_cmdfcn_t func_name; \
\
DB_SET(cmd_name, func_name, set, flag, more); \
Support statically attaching of ddb commands in non-ddb modules. The details are hidden in the DB_COMMAND(cmd_name, func_name) and DB_SHOW_COMMAND(cmd_name, func_name) macros. DB_COMMAND() adds to the top-level ddb command table and DB_SHOW_COMMAND adds to the `show' subtable. Most external commands will probably be `show' commands with no side effects. They should check their pointer args more carefully than `show map' :-), or ddb should trap internal faults better (like it does for memory accesses). The vm ddb commands are temporarily unattached. ddb.h: Also declare `db_indent' and db_iprintf() which will replace vm's `indent' and iprintf().
1996-09-14 09:13:15 +00:00
\
static void \
func_name(addr, have_addr, count, modif) \
db_expr_t addr; \
boolean_t have_addr; \
db_expr_t count; \
char *modif;
Fixed bogus type of valuep in struct db_variable. It was `int *' and became `long *' for alpha, but should always have been `db_expr_t *'. Fixed variable types to match.
1998-07-08 09:11:43 +00:00
extern db_expr_t db_maxoff;
Support statically attaching of ddb commands in non-ddb modules. The details are hidden in the DB_COMMAND(cmd_name, func_name) and DB_SHOW_COMMAND(cmd_name, func_name) macros. DB_COMMAND() adds to the top-level ddb command table and DB_SHOW_COMMAND adds to the `show' subtable. Most external commands will probably be `show' commands with no side effects. They should check their pointer args more carefully than `show map' :-), or ddb should trap internal faults better (like it does for memory accesses). The vm ddb commands are temporarily unattached. ddb.h: Also declare `db_indent' and db_iprintf() which will replace vm's `indent' and iprintf().
1996-09-14 09:13:15 +00:00
extern int db_indent;
Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
extern int db_inst_count;
extern int db_load_count;
extern int db_store_count;
Simplify the pager support in DDB. Allowing different db commands to install custom pager functions didn't actually happen in practice (they all just used the simple pager and passed in a local quit pointer). So, just hardcode the simple pager as the only pager and make it set a global db_pager_quit flag that db commands can check when the user hits 'q' (or a suitable variant) at the pager prompt. Also, now that it's easy to do so, enable paging by default for all ddb commands. Any command that wishes to honor the quit flag can do so by checking db_pager_quit. Note that the pager can also be effectively disabled by setting $lines to 0. Other fixes: - 'show idt' on i386 and pc98 now actually checks the quit flag and terminates early. - 'show intr' now actually checks the quit flag and terminates early.
2006-07-12 21:22:44 +00:00
extern volatile int db_pager_quit;
Fixed bogus type of valuep in struct db_variable. It was `int *' and became `long *' for alpha, but should always have been `db_expr_t *'. Fixed variable types to match.
1998-07-08 09:11:43 +00:00
extern db_expr_t db_radix;
extern db_expr_t db_max_width;
extern db_expr_t db_tab_stop_width;
- Change the ddb paging "support" to use a variable (db_lines_per_page) to control the number of lines per page rather than a constant. The variable can be examined and changed in ddb as '$lines'. Setting the variable to 0 will effectively turn off paging. - Change db_putchar() to force out pending whitespace before outputting newlines and carriage returns so that one can rub out content on the current line via '\r \r' type strings. - Change the simple pager to rub out the --More-- prompt explicitly when the routine exits. - Add some aliases to the simple pager to make it more compatible with more(1): 'e' and 'j' do a single line. 'd' does half a page, and 'f' does a full page. MFC after: 1 month Inspired by: kris
2004-11-01 22:15:15 +00:00
extern db_expr_t db_lines_per_page;
Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
Mega update for the KDB framework: turn DDB into a KDB backend. Most of the changes are a direct result of adding thread awareness. Typically, DDB_REGS is gone. All registers are taken from the trapframe and backtraces use the PCB based contexts. DDB_REGS was defined to be a trapframe on all platforms anyway. Thread awareness introduces the following new commands: thread X switch to thread X (where X is the TID), show threads list all threads. The backtrace code has been made more flexible so that one can create backtraces for any thread by giving the thread ID as an argument to trace. With this change, ia64 has support for breakpoints.
2004-07-10 23:47:20 +00:00
struct thread;
Support statically attaching of ddb commands in non-ddb modules. The details are hidden in the DB_COMMAND(cmd_name, func_name) and DB_SHOW_COMMAND(cmd_name, func_name) macros. DB_COMMAND() adds to the top-level ddb command table and DB_SHOW_COMMAND adds to the `show' subtable. Most external commands will probably be `show' commands with no side effects. They should check their pointer args more carefully than `show map' :-), or ddb should trap internal faults better (like it does for memory accesses). The vm ddb commands are temporarily unattached. ddb.h: Also declare `db_indent' and db_iprintf() which will replace vm's `indent' and iprintf().
1996-09-14 09:13:15 +00:00
struct vm_map;
Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
Remove __P.
2002-03-20 05:14:42 +00:00
void db_check_interrupt(void);
void db_clear_watchpoints(void);
db_addr_t db_disasm(db_addr_t loc, boolean_t altfmt);
Completed function declarations and/or added prototypes. Removed `extern' from prototypes. Sorted prototypes. Uniformized idempotency ifdefs.
1995-11-24 13:53:05 +00:00
/* instruction disassembler */
Constify to kill some warnings.
2002-09-21 17:29:36 +00:00
void db_error(const char *s);
Remove __P.
2002-03-20 05:14:42 +00:00
int db_expression(db_expr_t *valuep);
int db_get_variable(db_expr_t *valuep);
void db_iprintf(const char *,...) __printflike(1, 2);
Add two helper functions: db_lookup_thread() and db_lookup_proc(). They take the addr value passed to a ddb command and attempt to use it to lookup a struct thread * or struct proc *, respectively. Each function first reparses the passed in value as if it was an ID entered in base 10. For threads the ID is treated as a thread ID, for proceses the ID is treated as a PID. If a thread or proc matching the ID is found, it is returned. For db_lookup_thread(), if the check_pid argument is true and it didn't find a thread with a matching thread ID, it will treat the ID as a PID and look for a matching process. If it finds one it returns the first thread in the process. If none of the ID lookups succeeded, then the functions assume that the passed in address is a thread or proc pointer, respectively. This allows one to use tids, pids, or structure pointers interchangeably in ddb functions that want to lookup threads or processes if desired.
2006-04-25 20:22:48 +00:00
struct proc *db_lookup_proc(db_expr_t addr);
struct thread *db_lookup_thread(db_expr_t addr, boolean_t check_pid);
Remove __P.
2002-03-20 05:14:42 +00:00
struct vm_map *db_map_addr(vm_offset_t);
boolean_t db_map_current(struct vm_map *);
boolean_t db_map_equal(struct vm_map *, struct vm_map *);
Move the prototypes of db_md_set_watchpoint(), db_md_clr_watchpoint() and db_md_list_watchpoints() to ddb/ddb.h.
2005-09-10 03:01:25 +00:00
int db_md_set_watchpoint(db_expr_t addr, db_expr_t size);
int db_md_clr_watchpoint(db_expr_t addr, db_expr_t size);
void db_md_list_watchpoints(void);
Remove __P.
2002-03-20 05:14:42 +00:00
void db_print_loc_and_inst(db_addr_t loc);
Mega update for the KDB framework: turn DDB into a KDB backend. Most of the changes are a direct result of adding thread awareness. Typically, DDB_REGS is gone. All registers are taken from the trapframe and backtraces use the PCB based contexts. DDB_REGS was defined to be a trapframe on all platforms anyway. Thread awareness introduces the following new commands: thread X switch to thread X (where X is the TID), show threads list all threads. The backtrace code has been made more flexible so that one can create backtraces for any thread by giving the thread ID as an argument to trace. With this change, ia64 has support for breakpoints.
2004-07-10 23:47:20 +00:00
void db_print_thread(void);
Remove __P.
2002-03-20 05:14:42 +00:00
void db_printf(const char *fmt, ...) __printflike(1, 2);
Mega update for the KDB framework: turn DDB into a KDB backend. Most of the changes are a direct result of adding thread awareness. Typically, DDB_REGS is gone. All registers are taken from the trapframe and backtraces use the PCB based contexts. DDB_REGS was defined to be a trapframe on all platforms anyway. Thread awareness introduces the following new commands: thread X switch to thread X (where X is the TID), show threads list all threads. The backtrace code has been made more flexible so that one can create backtraces for any thread by giving the thread ID as an argument to trace. With this change, ia64 has support for breakpoints.
2004-07-10 23:47:20 +00:00
int db_read_bytes(vm_offset_t addr, size_t size, char *data);
Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
/* machine-dependent */
Remove __P.
2002-03-20 05:14:42 +00:00
int db_readline(char *lstart, int lsize);
void db_restart_at_pc(boolean_t watchpt);
Mega update for the KDB framework: turn DDB into a KDB backend. Most of the changes are a direct result of adding thread awareness. Typically, DDB_REGS is gone. All registers are taken from the trapframe and backtraces use the PCB based contexts. DDB_REGS was defined to be a trapframe on all platforms anyway. Thread awareness introduces the following new commands: thread X switch to thread X (where X is the TID), show threads list all threads. The backtrace code has been made more flexible so that one can create backtraces for any thread by giving the thread ID as an argument to trace. With this change, ia64 has support for breakpoints.
2004-07-10 23:47:20 +00:00
int db_set_variable(db_expr_t value);
Remove __P.
2002-03-20 05:14:42 +00:00
void db_set_watchpoints(void);
void db_skip_to_eol(void);
boolean_t db_stop_at_pc(boolean_t *is_breakpoint);
Completed function declarations and/or added prototypes. Removed `extern' from prototypes. Sorted prototypes. Uniformized idempotency ifdefs.
1995-11-24 13:53:05 +00:00
#define db_strcpy strcpy
Mega update for the KDB framework: turn DDB into a KDB backend. Most of the changes are a direct result of adding thread awareness. Typically, DDB_REGS is gone. All registers are taken from the trapframe and backtraces use the PCB based contexts. DDB_REGS was defined to be a trapframe on all platforms anyway. Thread awareness introduces the following new commands: thread X switch to thread X (where X is the TID), show threads list all threads. The backtrace code has been made more flexible so that one can create backtraces for any thread by giving the thread ID as an argument to trace. With this change, ia64 has support for breakpoints.
2004-07-10 23:47:20 +00:00
void db_trace_self(void);
int db_trace_thread(struct thread *, int);
Remove __P.
2002-03-20 05:14:42 +00:00
int db_value_of_name(const char *name, db_expr_t *valuep);
Mega update for the KDB framework: turn DDB into a KDB backend. Most of the changes are a direct result of adding thread awareness. Typically, DDB_REGS is gone. All registers are taken from the trapframe and backtraces use the PCB based contexts. DDB_REGS was defined to be a trapframe on all platforms anyway. Thread awareness introduces the following new commands: thread X switch to thread X (where X is the TID), show threads list all threads. The backtrace code has been made more flexible so that one can create backtraces for any thread by giving the thread ID as an argument to trace. With this change, ia64 has support for breakpoints.
2004-07-10 23:47:20 +00:00
int db_write_bytes(vm_offset_t addr, size_t size, char *data);
Completed function declarations and/or added prototypes. Removed `extern' from prototypes. Sorted prototypes. Uniformized idempotency ifdefs.
1995-11-24 13:53:05 +00:00
db_cmdfcn_t db_breakpoint_cmd;
db_cmdfcn_t db_continue_cmd;
db_cmdfcn_t db_delete_cmd;
Add 'hwatch' and 'dhwatch' ddb commands analogous to 'watch' and 'dwatch'. The new commands install hardware watchpoints if supported by the architecture and if there are enough registers to cover the desired memory area. No objection by: audit@, hackers@ MFC after: 2 weeks
2001-07-11 03:15:25 +00:00
db_cmdfcn_t db_deletehwatch_cmd;
Completed function declarations and/or added prototypes. Removed `extern' from prototypes. Sorted prototypes. Uniformized idempotency ifdefs.
1995-11-24 13:53:05 +00:00
db_cmdfcn_t db_deletewatch_cmd;
db_cmdfcn_t db_examine_cmd;
Add 'hwatch' and 'dhwatch' ddb commands analogous to 'watch' and 'dwatch'. The new commands install hardware watchpoints if supported by the architecture and if there are enough registers to cover the desired memory area. No objection by: audit@, hackers@ MFC after: 2 weeks
2001-07-11 03:15:25 +00:00
db_cmdfcn_t db_hwatchpoint_cmd;
Completed function declarations and/or added prototypes. Removed `extern' from prototypes. Sorted prototypes. Uniformized idempotency ifdefs.
1995-11-24 13:53:05 +00:00
db_cmdfcn_t db_listbreak_cmd;
db_cmdfcn_t db_print_cmd;
db_cmdfcn_t db_ps;
db_cmdfcn_t db_search_cmd;
db_cmdfcn_t db_set_cmd;
Mega update for the KDB framework: turn DDB into a KDB backend. Most of the changes are a direct result of adding thread awareness. Typically, DDB_REGS is gone. All registers are taken from the trapframe and backtraces use the PCB based contexts. DDB_REGS was defined to be a trapframe on all platforms anyway. Thread awareness introduces the following new commands: thread X switch to thread X (where X is the TID), show threads list all threads. The backtrace code has been made more flexible so that one can create backtraces for any thread by giving the thread ID as an argument to trace. With this change, ia64 has support for breakpoints.
2004-07-10 23:47:20 +00:00
db_cmdfcn_t db_set_thread;
Completed function declarations and/or added prototypes. Removed `extern' from prototypes. Sorted prototypes. Uniformized idempotency ifdefs.
1995-11-24 13:53:05 +00:00
db_cmdfcn_t db_show_regs;
Mega update for the KDB framework: turn DDB into a KDB backend. Most of the changes are a direct result of adding thread awareness. Typically, DDB_REGS is gone. All registers are taken from the trapframe and backtraces use the PCB based contexts. DDB_REGS was defined to be a trapframe on all platforms anyway. Thread awareness introduces the following new commands: thread X switch to thread X (where X is the TID), show threads list all threads. The backtrace code has been made more flexible so that one can create backtraces for any thread by giving the thread ID as an argument to trace. With this change, ia64 has support for breakpoints.
2004-07-10 23:47:20 +00:00
db_cmdfcn_t db_show_threads;
Completed function declarations and/or added prototypes. Removed `extern' from prototypes. Sorted prototypes. Uniformized idempotency ifdefs.
1995-11-24 13:53:05 +00:00
db_cmdfcn_t db_single_step_cmd;
db_cmdfcn_t db_trace_until_call_cmd;
db_cmdfcn_t db_trace_until_matching_cmd;
db_cmdfcn_t db_watchpoint_cmd;
db_cmdfcn_t db_write_cmd;
Support statically attaching of ddb commands in non-ddb modules. The details are hidden in the DB_COMMAND(cmd_name, func_name) and DB_SHOW_COMMAND(cmd_name, func_name) macros. DB_COMMAND() adds to the top-level ddb command table and DB_SHOW_COMMAND adds to the `show' subtable. Most external commands will probably be `show' commands with no side effects. They should check their pointer args more carefully than `show map' :-), or ddb should trap internal faults better (like it does for memory accesses). The vm ddb commands are temporarily unattached. ddb.h: Also declare `db_indent' and db_iprintf() which will replace vm's `indent' and iprintf().
1996-09-14 09:13:15 +00:00
/*
* Command table.
*/
Clean up the way we handle auxiliary commands for a given ddb command table. Previously, the ddb code knew of each linker set of auxiliary commands and which explicit command list they were tied to. These changes add a simple command_table struct that contains both the static list of commands and the pointers for any auxiliary linker set of additional commands. This also makes it possible for other arbitrary command tables to be defined in other parts of the kernel w/o having to edit ddb itself. The DB_SET macro has also been trimmed down to just creating an entry in a linker set. A new DB_FUNC macro does what the old DB_SET did which is to not only add an entry to the linker set but also to include a function prototype for the function being added. With these changes, it's now also possible to create aliases for ddb functions using DB_SET() directly if desired.
2006-03-07 22:17:06 +00:00
struct command;
struct command_table {
struct command *table;
struct command **aux_tablep;
struct command **aux_tablep_end;
};
Support statically attaching of ddb commands in non-ddb modules. The details are hidden in the DB_COMMAND(cmd_name, func_name) and DB_SHOW_COMMAND(cmd_name, func_name) macros. DB_COMMAND() adds to the top-level ddb command table and DB_SHOW_COMMAND adds to the `show' subtable. Most external commands will probably be `show' commands with no side effects. They should check their pointer args more carefully than `show map' :-), or ddb should trap internal faults better (like it does for memory accesses). The vm ddb commands are temporarily unattached. ddb.h: Also declare `db_indent' and db_iprintf() which will replace vm's `indent' and iprintf().
1996-09-14 09:13:15 +00:00
struct command {
char * name; /* command name */
db_cmdfcn_t *fcn; /* function to call */
int flag; /* extra info: */
#define CS_OWN 0x1 /* non-standard syntax */
#define CS_MORE 0x2 /* standard syntax, but may have other words
* at end */
#define CS_SET_DOT 0x100 /* set dot after command */
Clean up the way we handle auxiliary commands for a given ddb command table. Previously, the ddb code knew of each linker set of auxiliary commands and which explicit command list they were tied to. These changes add a simple command_table struct that contains both the static list of commands and the pointers for any auxiliary linker set of additional commands. This also makes it possible for other arbitrary command tables to be defined in other parts of the kernel w/o having to edit ddb itself. The DB_SET macro has also been trimmed down to just creating an entry in a linker set. A new DB_FUNC macro does what the old DB_SET did which is to not only add an entry to the linker set but also to include a function prototype for the function being added. With these changes, it's now also possible to create aliases for ddb functions using DB_SET() directly if desired.
2006-03-07 22:17:06 +00:00
struct command_table *more; /* another level of command */
Support statically attaching of ddb commands in non-ddb modules. The details are hidden in the DB_COMMAND(cmd_name, func_name) and DB_SHOW_COMMAND(cmd_name, func_name) macros. DB_COMMAND() adds to the top-level ddb command table and DB_SHOW_COMMAND adds to the `show' subtable. Most external commands will probably be `show' commands with no side effects. They should check their pointer args more carefully than `show map' :-), or ddb should trap internal faults better (like it does for memory accesses). The vm ddb commands are temporarily unattached. ddb.h: Also declare `db_indent' and db_iprintf() which will replace vm's `indent' and iprintf().
1996-09-14 09:13:15 +00:00
};
Completed function declarations and/or added prototypes. Removed `extern' from prototypes. Sorted prototypes. Uniformized idempotency ifdefs.
1995-11-24 13:53:05 +00:00
#endif /* !_DDB_DDB_H_ */
Reference in New Issue Copy Permalink