2004-03-21 18:16:49 +00:00
|
|
|
/*-
|
Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.
Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.
However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.
For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.
This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.
We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).
Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months
2006-07-09 17:50:20 +00:00
|
|
|
* ISP Firmware Modules for FreeBSD
|
2000-06-18 04:37:44 +00:00
|
|
|
*
|
Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.
Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.
However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.
For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.
This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.
We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).
Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months
2006-07-09 17:50:20 +00:00
|
|
|
* Copyright (c) 2000, 2001, 2006 by Matthew Jacob
|
2000-06-18 04:37:44 +00:00
|
|
|
* All rights reserved.
|
|
|
|
|
*
|
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
|
* are met:
|
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
|
* notice immediately at the beginning of the file, without modification,
|
|
|
|
|
* this list of conditions, and the following disclaimer.
|
2000-09-21 20:16:04 +00:00
|
|
|
* 2. The name of the author may not be used to endorse or promote products
|
|
|
|
|
* derived from this software without specific prior written permission.
|
2000-06-18 04:37:44 +00:00
|
|
|
*
|
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
|
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
|
|
|
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
|
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
|
* SUCH DAMAGE.
|
|
|
|
|
*/
|
|
|
|
|
|
2004-03-21 18:16:49 +00:00
|
|
|
#include <sys/cdefs.h>
|
|
|
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
|
|
2000-06-18 04:37:44 +00:00
|
|
|
#include <sys/param.h>
|
|
|
|
|
#include <sys/kernel.h>
|
2004-05-30 20:08:47 +00:00
|
|
|
#include <sys/module.h>
|
Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.
Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.
However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.
For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.
This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.
We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).
Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months
2006-07-09 17:50:20 +00:00
|
|
|
#include <sys/param.h>
|
|
|
|
|
#include <sys/systm.h>
|
|
|
|
|
#include <sys/linker.h>
|
|
|
|
|
#include <sys/firmware.h>
|
|
|
|
|
|
|
|
|
|
#if defined(ISP_ALL) || !defined(KLD_MODULE)
|
|
|
|
|
#define ISP_1040 1
|
|
|
|
|
#define ISP_1040_IT 1
|
|
|
|
|
#define ISP_1080 1
|
|
|
|
|
#define ISP_1080_IT 1
|
|
|
|
|
#define ISP_12160 1
|
|
|
|
|
#define ISP_12160_IT 1
|
|
|
|
|
#define ISP_2100 1
|
|
|
|
|
#define ISP_2200 1
|
|
|
|
|
#define ISP_2300 1
|
|
|
|
|
#define ISP_2322 1
|
2006-08-26 18:39:18 +00:00
|
|
|
#define ISP_2400 1
|
Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.
Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.
However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.
For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.
This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.
We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).
Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months
2006-07-09 17:50:20 +00:00
|
|
|
#ifdef __sparc64__
|
|
|
|
|
#define ISP_1000 1
|
|
|
|
|
#endif
|
|
|
|
|
#define MODULE_NAME "isp"
|
|
|
|
|
#endif
|
2000-06-18 04:37:44 +00:00
|
|
|
|
Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.
Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.
However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.
For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.
This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.
We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).
Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months
2006-07-09 17:50:20 +00:00
|
|
|
#if defined(ISP_1040) || defined(ISP_1040_IT)
|
2000-06-18 04:37:44 +00:00
|
|
|
#include <dev/ispfw/asm_1040.h>
|
Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.
Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.
However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.
For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.
This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.
We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).
Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months
2006-07-09 17:50:20 +00:00
|
|
|
#endif
|
|
|
|
|
#if defined(ISP_1080) || defined(ISP_1080_IT)
|
2000-06-18 04:37:44 +00:00
|
|
|
#include <dev/ispfw/asm_1080.h>
|
Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.
Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.
However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.
For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.
This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.
We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).
Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months
2006-07-09 17:50:20 +00:00
|
|
|
#endif
|
|
|
|
|
#if defined(ISP_12160) || defined(ISP_12160_IT)
|
2000-06-18 04:37:44 +00:00
|
|
|
#include <dev/ispfw/asm_12160.h>
|
Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.
Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.
However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.
For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.
This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.
We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).
Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months
2006-07-09 17:50:20 +00:00
|
|
|
#endif
|
|
|
|
|
#if defined(ISP_2100)
|
2000-06-18 04:37:44 +00:00
|
|
|
#include <dev/ispfw/asm_2100.h>
|
Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.
Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.
However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.
For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.
This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.
We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).
Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months
2006-07-09 17:50:20 +00:00
|
|
|
#endif
|
|
|
|
|
#if defined(ISP_2200)
|
2000-06-18 04:37:44 +00:00
|
|
|
#include <dev/ispfw/asm_2200.h>
|
Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.
Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.
However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.
For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.
This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.
We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).
Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months
2006-07-09 17:50:20 +00:00
|
|
|
#endif
|
|
|
|
|
#if defined(ISP_2300)
|
2001-08-31 21:25:15 +00:00
|
|
|
#include <dev/ispfw/asm_2300.h>
|
Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.
Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.
However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.
For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.
This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.
We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).
Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months
2006-07-09 17:50:20 +00:00
|
|
|
#endif
|
|
|
|
|
#if defined(ISP_2322)
|
2006-07-03 08:22:09 +00:00
|
|
|
#include <dev/ispfw/asm_2322.h>
|
2002-07-11 01:55:15 +00:00
|
|
|
#endif
|
2006-08-26 18:39:18 +00:00
|
|
|
#if defined(ISP_2400)
|
|
|
|
|
#include <dev/ispfw/asm_2400.h>
|
|
|
|
|
#endif
|
Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.
Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.
However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.
For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.
This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.
We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).
Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months
2006-07-09 17:50:20 +00:00
|
|
|
#if defined(ISP_1000)
|
|
|
|
|
#include <dev/ispfw/asm_1000.h>
|
2002-07-11 01:55:15 +00:00
|
|
|
#endif
|
2000-06-18 04:37:44 +00:00
|
|
|
|
Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.
Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.
However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.
For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.
This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.
We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).
Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months
2006-07-09 17:50:20 +00:00
|
|
|
#define ISPFW_VERSION 1
|
|
|
|
|
#define RMACRO(token) \
|
|
|
|
|
if (firmware_register(#token, token##_risc_code, \
|
2006-08-26 18:39:18 +00:00
|
|
|
token##_risc_code [3] * sizeof token##_risc_code [3], \
|
|
|
|
|
ISPFW_VERSION, NULL) == NULL) { \
|
Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.
Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.
However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.
For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.
This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.
We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).
Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months
2006-07-09 17:50:20 +00:00
|
|
|
printf("unable to register firmware '%s'\n", #token); \
|
|
|
|
|
} else { \
|
|
|
|
|
printf("registered firmware set <%s>\n", #token); \
|
|
|
|
|
}
|
2000-06-18 04:37:44 +00:00
|
|
|
|
Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.
Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.
However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.
For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.
This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.
We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).
Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months
2006-07-09 17:50:20 +00:00
|
|
|
#define UMACRO(token) \
|
|
|
|
|
firmware_unregister(#token); \
|
|
|
|
|
printf("unregistered firmware set <%s>\n", #token);
|
2000-06-18 04:37:44 +00:00
|
|
|
|
|
|
|
|
static int
|
Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.
Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.
However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.
For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.
This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.
We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).
Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months
2006-07-09 17:50:20 +00:00
|
|
|
do_load_fw(void)
|
2000-06-18 04:37:44 +00:00
|
|
|
{
|
Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.
Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.
However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.
For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.
This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.
We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).
Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months
2006-07-09 17:50:20 +00:00
|
|
|
#if defined(ISP_1000)
|
|
|
|
|
RMACRO(isp_1000);
|
|
|
|
|
#endif
|
|
|
|
|
#if defined(ISP_1040)
|
|
|
|
|
RMACRO(isp_1040);
|
|
|
|
|
#endif
|
|
|
|
|
#if defined(ISP_1040_IT)
|
|
|
|
|
RMACRO(isp_1040_it);
|
|
|
|
|
#endif
|
|
|
|
|
#if defined(ISP_1080)
|
|
|
|
|
RMACRO(isp_1080);
|
|
|
|
|
#endif
|
|
|
|
|
#if defined(ISP_1080_IT)
|
|
|
|
|
RMACRO(isp_1080_it);
|
|
|
|
|
#endif
|
|
|
|
|
#if defined(ISP_12160)
|
|
|
|
|
RMACRO(isp_12160);
|
|
|
|
|
#endif
|
|
|
|
|
#if defined(ISP_12160_IT)
|
|
|
|
|
RMACRO(isp_12160_it);
|
|
|
|
|
#endif
|
|
|
|
|
#if defined(ISP_2100)
|
|
|
|
|
RMACRO(isp_2100);
|
|
|
|
|
#endif
|
|
|
|
|
#if defined(ISP_2200)
|
|
|
|
|
RMACRO(isp_2200);
|
|
|
|
|
#endif
|
|
|
|
|
#if defined(ISP_2300)
|
|
|
|
|
RMACRO(isp_2300);
|
|
|
|
|
#endif
|
|
|
|
|
#if defined(ISP_2322)
|
|
|
|
|
RMACRO(isp_2322);
|
2006-08-26 18:39:18 +00:00
|
|
|
#endif
|
|
|
|
|
#if defined(ISP_2400)
|
|
|
|
|
RMACRO(isp_2400);
|
Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.
Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.
However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.
For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.
This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.
We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).
Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months
2006-07-09 17:50:20 +00:00
|
|
|
#endif
|
|
|
|
|
return (0);
|
2000-06-18 04:37:44 +00:00
|
|
|
}
|
|
|
|
|
|
Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.
Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.
However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.
For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.
This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.
We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).
Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months
2006-07-09 17:50:20 +00:00
|
|
|
static int
|
|
|
|
|
do_unload_fw(void)
|
2000-06-18 04:37:44 +00:00
|
|
|
{
|
Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.
Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.
However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.
For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.
This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.
We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).
Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months
2006-07-09 17:50:20 +00:00
|
|
|
#if defined(ISP_1000)
|
|
|
|
|
UMACRO(isp_1000);
|
|
|
|
|
#elif defined(ISP_1040)
|
|
|
|
|
UMACRO(isp_1040);
|
|
|
|
|
#elif defined(ISP_1040_IT)
|
|
|
|
|
UMACRO(isp_1040_it);
|
|
|
|
|
#elif defined(ISP_1080)
|
|
|
|
|
UMACRO(isp_1080);
|
|
|
|
|
#elif defined(ISP_1080_IT)
|
|
|
|
|
UMACRO(isp_1080_it);
|
|
|
|
|
#elif defined(ISP_12160)
|
|
|
|
|
UMACRO(isp_12160);
|
|
|
|
|
#elif defined(ISP_12160_IT)
|
|
|
|
|
UMACRO(isp_12160_it);
|
|
|
|
|
#elif defined(ISP_2100)
|
|
|
|
|
UMACRO(isp_2100);
|
|
|
|
|
#elif defined(ISP_2200)
|
|
|
|
|
UMACRO(isp_2200);
|
|
|
|
|
#elif defined(ISP_2300)
|
|
|
|
|
UMACRO(isp_2300);
|
|
|
|
|
#elif defined(ISP_2322)
|
|
|
|
|
UMACRO(isp_2322);
|
2006-08-26 18:39:18 +00:00
|
|
|
#elif defined(ISP_2400)
|
|
|
|
|
UMACRO(isp_2400);
|
Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.
Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.
However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.
For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.
This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.
We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).
Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months
2006-07-09 17:50:20 +00:00
|
|
|
#endif
|
|
|
|
|
return (0);
|
2000-06-18 04:37:44 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.
Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.
However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.
For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.
This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.
We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).
Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months
2006-07-09 17:50:20 +00:00
|
|
|
module_handler(module_t mod, int what, void *arg)
|
2000-06-18 04:37:44 +00:00
|
|
|
{
|
Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.
Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.
However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.
For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.
This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.
We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).
Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months
2006-07-09 17:50:20 +00:00
|
|
|
int r;
|
2000-06-18 04:37:44 +00:00
|
|
|
switch (what) {
|
|
|
|
|
case MOD_LOAD:
|
Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.
Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.
However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.
For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.
This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.
We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).
Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months
2006-07-09 17:50:20 +00:00
|
|
|
r = do_load_fw();
|
2000-06-18 04:37:44 +00:00
|
|
|
break;
|
|
|
|
|
case MOD_UNLOAD:
|
Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.
Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.
However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.
For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.
This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.
We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).
Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months
2006-07-09 17:50:20 +00:00
|
|
|
r = do_unload_fw();
|
2000-06-18 04:37:44 +00:00
|
|
|
break;
|
|
|
|
|
default:
|
Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.
Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.
However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.
For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.
This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.
We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).
Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months
2006-07-09 17:50:20 +00:00
|
|
|
r = EOPNOTSUPP;
|
2000-06-18 04:37:44 +00:00
|
|
|
break;
|
|
|
|
|
}
|
Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.
Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.
However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.
For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.
This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.
We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).
Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months
2006-07-09 17:50:20 +00:00
|
|
|
return (r);
|
2000-06-18 04:37:44 +00:00
|
|
|
}
|
|
|
|
|
static moduledata_t ispfw_mod = {
|
Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.
Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.
However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.
For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.
This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.
We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).
Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months
2006-07-09 17:50:20 +00:00
|
|
|
MODULE_NAME, module_handler, NULL
|
2000-06-18 04:37:44 +00:00
|
|
|
};
|
Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.
Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.
However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.
For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.
This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.
We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).
Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months
2006-07-09 17:50:20 +00:00
|
|
|
#ifndef KLD_MODULE
|
|
|
|
|
DECLARE_MODULE(isp, ispfw_mod, SI_SUB_DRIVERS, SI_ORDER_THIRD);
|
|
|
|
|
#else
|
|
|
|
|
#if defined(ISP_1000)
|
|
|
|
|
DECLARE_MODULE(isp_1000, ispfw_mod, SI_SUB_DRIVERS, SI_ORDER_THIRD);
|
|
|
|
|
#elif defined(ISP_1040)
|
|
|
|
|
DECLARE_MODULE(isp_1040, ispfw_mod, SI_SUB_DRIVERS, SI_ORDER_THIRD);
|
|
|
|
|
#elif defined(ISP_1040_IT)
|
|
|
|
|
DECLARE_MODULE(isp_1040_it, ispfw_mod, SI_SUB_DRIVERS, SI_ORDER_THIRD);
|
|
|
|
|
#elif defined(ISP_1080)
|
|
|
|
|
DECLARE_MODULE(isp_1080, ispfw_mod, SI_SUB_DRIVERS, SI_ORDER_THIRD);
|
|
|
|
|
#elif defined(ISP_1080_IT)
|
|
|
|
|
DECLARE_MODULE(isp_1080_it, ispfw_mod, SI_SUB_DRIVERS, SI_ORDER_THIRD);
|
|
|
|
|
#elif defined(ISP_12160)
|
|
|
|
|
DECLARE_MODULE(isp_12160, ispfw_mod, SI_SUB_DRIVERS, SI_ORDER_THIRD);
|
|
|
|
|
#elif defined(ISP_12160_IT)
|
|
|
|
|
DECLARE_MODULE(isp_12160_IT, ispfw_mod, SI_SUB_DRIVERS, SI_ORDER_THIRD);
|
|
|
|
|
#elif defined(ISP_2100)
|
|
|
|
|
DECLARE_MODULE(isp_2100, ispfw_mod, SI_SUB_DRIVERS, SI_ORDER_THIRD);
|
|
|
|
|
#elif defined(ISP_2200)
|
|
|
|
|
DECLARE_MODULE(isp_2200, ispfw_mod, SI_SUB_DRIVERS, SI_ORDER_THIRD);
|
|
|
|
|
#elif defined(ISP_2300)
|
|
|
|
|
DECLARE_MODULE(isp_2300, ispfw_mod, SI_SUB_DRIVERS, SI_ORDER_THIRD);
|
|
|
|
|
#elif defined(ISP_2322)
|
|
|
|
|
DECLARE_MODULE(isp_2322, ispfw_mod, SI_SUB_DRIVERS, SI_ORDER_THIRD);
|
2006-08-26 18:39:18 +00:00
|
|
|
#elif defined(ISP_2400)
|
|
|
|
|
DECLARE_MODULE(isp_2400, ispfw_mod, SI_SUB_DRIVERS, SI_ORDER_THIRD);
|
Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.
Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.
However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.
For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.
This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.
We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).
Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months
2006-07-09 17:50:20 +00:00
|
|
|
#endif
|
|
|
|
|
#endif
|
