d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
6303ae4d5c
freebsd-dev/sys/dev/isci/scil/sati_move.c

617 lines
23 KiB
C
Raw Normal View History

Add isci(4) driver for amd64 and i386 targets. The isci driver is for the integrated SAS controller in the Intel C600 (Patsburg) chipset. Source files in sys/dev/isci directory are FreeBSD-specific, and sys/dev/isci/scil subdirectory contains an OS-agnostic library (SCIL) published by Intel to control the SAS controller. This library is used primarily as-is in this driver, with some post-processing to better integrate into the kernel build environment. isci.4 and a README in the sys/dev/isci directory contain a few additional details. This driver is only built for amd64 and i386 targets. Sponsored by: Intel Reviewed by: scottl Approved by: scottl
2012-01-31 19:38:18 +00:00
/*-
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* BSD LICENSE
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/**
* @file
* @brief This file contains the method implementations common to
* translations that move data (i.e. read, write). It has code for
* the various different size CDBs (6, 10, 12, 16).
*/
#include <dev/isci/scil/sati_move.h>
#include <dev/isci/scil/sati_callbacks.h>
#include <dev/isci/scil/sati_translator_sequence.h>
#include <dev/isci/scil/sati_util.h>
#include <dev/isci/scil/intel_ata.h>
#include <dev/isci/scil/intel_scsi.h>
#include <dev/isci/scil/intel_sat.h>
//******************************************************************************
//* P R I V A T E M E T H O D S
//******************************************************************************
/**
* @brief This method simply sets the command register based upon the
* supplied opcodes and the data direction.
* For more information on the parameters passed to this method,
* please reference sati_translate_command()
*
* @param[in] write_opcode This parameter specifies the value to be written
* to the ATA command register for a write (data out) operation.
* @param[in] read_opcode This parameter specifies the value to be written
* to the ATA command register for a read (data in) operation.
*
* @return none.
*/
static
void sati_move_set_ata_command(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * ata_io,
U8 write_opcode,
U8 read_opcode
)
{
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
if (sequence->data_direction == SATI_DATA_DIRECTION_OUT)
sati_set_ata_command(register_fis, write_opcode);
else
sati_set_ata_command(register_fis, read_opcode);
}
/**
* @brief This method will translate the SCSI transfer count from the 6-byte
* CDB into the appropriate amount in the ATA register FIS. Please
* note for 48-bit UDMA requests, the caller must set the sector
* count extended field. This method also sets protocol and
* command fields.
* For more information on the parameters passed to this method,
* please reference sati_translate_command()
*
* @param[in] write_opcode This parameter specifies the value to be written
* to the ATA command register for a write (data out) operation.
* @param[in] read_opcode This parameter specifies the value to be written
* to the ATA command register for a read (data in) operation.
*
* @return none
*/
static
void sati_move_small_udma_translate_command(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io,
U8 write_opcode,
U8 read_opcode
)
{
U8 * cdb = sati_cb_get_cdb_address(scsi_io);
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
sati_move_set_ata_command(sequence, ata_io, write_opcode, read_opcode);
sati_set_ata_sector_count(register_fis, sati_get_cdb_byte(cdb, 4));
if (sequence->data_direction == SATI_DATA_DIRECTION_IN)
sequence->protocol = SAT_PROTOCOL_UDMA_DATA_IN;
else
sequence->protocol = SAT_PROTOCOL_UDMA_DATA_OUT;
}
/**
* @brief This method will translate the SCSI transfer count from the
* supplied sector_count parameter into the ATA register FIS.
* The translation is specific to 10,12, 16 byte CDBs.
* This method also sets protocol and command fields.
* For more information on the parameters passed to this method,
* please reference sati_translate_command()
*
* @param[in] sector_count This parameter specifies the number of sectors
* to be transfered.
* @param[in] write_opcode This parameter specifies the value to be written
* to the ATA command register for a write (data out) operation.
* @param[in] read_opcode This parameter specifies the value to be written
* to the ATA command register for a read (data in) operation.
*
* @return Please reference sati_move_set_sector_count() for information
* on return codes from this method.
*/
static
SATI_STATUS sati_move_large_udma_translate_command(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io,
U32 sector_count,
U8 write_opcode,
U8 read_opcode
)
{
sati_move_set_ata_command(sequence, ata_io, write_opcode, read_opcode);
if (sequence->data_direction == SATI_DATA_DIRECTION_IN)
sequence->protocol = SAT_PROTOCOL_UDMA_DATA_IN;
else
sequence->protocol = SAT_PROTOCOL_UDMA_DATA_OUT;
return sati_move_set_sector_count(
sequence, scsi_io, ata_io, sector_count, FALSE
);
}
/**
* @brief This method will translate the SCSI transfer count from the 6-byte
* CDB into the appropriate amount in the ATA register FIS.
* This is only used for translation of 6-byte SCSI CDBs.
* For more information on the parameters passed to this method,
* please reference sati_translate_command()
*
* @return none
*/
static
void sati_move_ncq_translate_8_bit_sector_count(
void * scsi_io,
void * ata_io
)
{
U8 * cdb = sati_cb_get_cdb_address(scsi_io);
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
sati_set_ata_features(register_fis, sati_get_cdb_byte(cdb, 4));
// A read 6 with a 0 sector count indicates a transfer of 256 sectors.
// As a result update the MSB (features expanded register) to indicate
// 256 sectors (0x100).
if (sati_get_cdb_byte(cdb, 4) == 0)
sati_set_ata_features_exp(register_fis, 1);
}
//******************************************************************************
//* P U B L I C M E T H O D S
//******************************************************************************
/**
* @brief This method will process a 32-bit sector into the appropriate fields
* in a register FIS. This method works for both 8-bit and 16-bit sector
* counts.
* This is used for translation of 10, 12, and 16-byte SCSI CDBs.
* For more information on the parameters passed to this method,
* please reference sati_translate_command().
*
* @note This method should only be called for CDB sizes of 10-bytes or larger.
*
* @param[in] sector_count This parameter specifies the number of sectors
* to be transfered.
* @param[in] is_fpdma_command This parameter indicates if the supplied
* ata_io is a first party DMA request (NCQ).
*
* @return none
*/
SATI_STATUS sati_move_set_sector_count(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io,
U32 sector_count,
U8 is_fpdma_command
)
{
U32 max_sector_count;
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
if (sequence->device->capabilities & SATI_DEVICE_CAP_48BIT_ENABLE)
max_sector_count = 65536;
else
max_sector_count = 256;
// Check the CDB transfer length count and set the register FIS sector
// count fields
if (0 == sector_count)
{
// A SCSI sector count of 0 for 10-byte CDBs and larger indicate no data
// transfer, so simply complete the command immediately.
return SATI_COMPLETE;
}
else if (sector_count >= max_sector_count)
{
// We have to perform multiple SATA commands to satisfy the sector
// count specified in the SCSI command.
sequence->command_specific_data.move_sector_count =
sector_count - max_sector_count;
// In ATA a sector count of 0 indicates use the maximum allowed for
// the command (i.e. 0 == 2^16 or 2^8).
sector_count = 0;
}
if (is_fpdma_command)
{
sati_set_ata_features(register_fis, sector_count & 0xFF);
sati_set_ata_features_exp(register_fis, (sector_count >> 8) & 0xFF);
}
else
{
sati_set_ata_sector_count(register_fis, sector_count & 0xFF);
sati_set_ata_sector_count_exp(register_fis, (sector_count >> 8) & 0xFF);
}
return SATI_SUCCESS;
}
/**
* @brief This method simply translates the 32-bit logical block address
* field from the SCSI CDB (10 or 12-byte) into the ATA task
* file (register FIS).
* For more information on the parameters passed to this method,
* please reference sati_translate_command()
*
* @return none
*/
void sati_move_translate_32_bit_lba(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io
)
{
U8 * cdb = sati_cb_get_cdb_address(scsi_io);
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
sati_set_ata_lba_low(register_fis, sati_get_cdb_byte(cdb, 5));
sati_set_ata_lba_mid(register_fis, sati_get_cdb_byte(cdb, 4));
sati_set_ata_lba_high(register_fis, sati_get_cdb_byte(cdb, 3));
sati_set_ata_lba_low_exp(register_fis, sati_get_cdb_byte(cdb, 2));
sati_set_ata_lba_mid_exp(register_fis, 0);
sati_set_ata_lba_high_exp(register_fis, 0);
}
/**
* @brief This method simply translates the 64-bit logical block address
* field from the SCSI CDB (16 byte) into the ATA task
* file (register FIS). The 2 most significant bytes must be 0,
* since ATA devices can, at most, support 48-bits of LBA.
* For more information on the parameters passed to this method,
* please reference sati_translate_command()
*
* @return Indicate if the LBA translation succeeded.
* @return SATI_SUCCESS This is returned if translation was successful.
* @return SATI_FAILURE_CHECK_RESPONSE_DATA This is returned if either
* of the 2 most significant bytes contain a non-zero value.
*/
SATI_STATUS sati_move_translate_64_bit_lba(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io
)
{
U8 * cdb = sati_cb_get_cdb_address(scsi_io);
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
// Ensure we receive a logical block address that is within range of
// addressibility per the ATA specification (i.e. 48-bit or 28-bit).
if ( (sati_get_cdb_byte(cdb, 2) == 0) && (sati_get_cdb_byte(cdb, 3) == 0) )
{
sati_set_ata_lba_low(register_fis, sati_get_cdb_byte(cdb, 9));
sati_set_ata_lba_mid(register_fis, sati_get_cdb_byte(cdb, 8));
sati_set_ata_lba_high(register_fis, sati_get_cdb_byte(cdb, 7));
sati_set_ata_lba_low_exp(register_fis, sati_get_cdb_byte(cdb, 6));
sati_set_ata_lba_mid_exp(register_fis, sati_get_cdb_byte(cdb, 5));
sati_set_ata_lba_high_exp(register_fis, sati_get_cdb_byte(cdb, 4));
return SATI_SUCCESS;
}
else
{
sati_scsi_sense_data_construct(
sequence,
scsi_io,
SCSI_STATUS_CHECK_CONDITION,
SCSI_SENSE_ILLEGAL_REQUEST,
SCSI_ASC_LBA_OUT_OF_RANGE,
SCSI_ASCQ_LBA_OUT_OF_RANGE
);
return SATI_FAILURE_CHECK_RESPONSE_DATA;
}
}
/**
* @brief This method will translate the pieces common to SCSI read and
* write 6 byte commands. Depending upon the capabilities
* supported by the target different ATA commands can be selected.
* For more information on the parameters passed to this method,
* please reference sati_translate_command().
*
* @return Indicate if the command translation succeeded.
* @retval SCI_SUCCESS This is returned if the command translation was
* successful.
*/
SATI_STATUS sati_move_6_translate_command(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io
)
{
U8 * cdb = sati_cb_get_cdb_address(scsi_io);
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
// Translate the logical block address information from the SCSI CDB.
// There is only 5 bits of MSB located in byte 1 of the CDB.
sati_set_ata_lba_low(register_fis, sati_get_cdb_byte(cdb, 3));
sati_set_ata_lba_mid(register_fis, sati_get_cdb_byte(cdb, 2));
sati_set_ata_lba_high(register_fis, sati_get_cdb_byte(cdb, 1) & 0x1F);
sati_move_translate_command(sequence, scsi_io, ata_io, 0);
return SATI_SUCCESS;
}
/**
* @brief This method will translate the pieces common to SCSI read and
* write 10/12 byte commands. Depending upon the capabilities
* supported by the target different ATA commands can be selected.
* For more information on the parameters passed to this method,
* please reference sati_translate_command().
*
* @param[in] device_head This parameter specifies the contents to be
* written to the device head register.
*
* @return Indicate if the command translation succeeded.
* @retval SCI_SUCCESS This is returned if the command translation was
* successful.
*/
SATI_STATUS sati_move_32_bit_lba_translate_command(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io,
U8 device_head
)
{
sati_move_translate_32_bit_lba(sequence, scsi_io, ata_io);
sati_move_translate_command(sequence, scsi_io, ata_io, device_head);
return SATI_SUCCESS;
}
/**
* @brief This method provides the common translation functionality for
* the 6-byte move command descriptor blocks (CDBs).
* This method will ensure that the following is performed:
* - command register is set
* - the SATI_TRANSLATOR_SEQUENCE::protocol field is set
* - the sector count field(s) are set
* - sati_move_6_translate_command() is invoked.
* For more information on the parameters passed to this method,
* please reference sati_translate_command().
*
* @pre The caller must ensure that the
* SATI_TRANSLATOR_SEQUENCE::data_direction field has already been set.
*
* @return Indicate if the command translation succeeded.
* @see sati_move_6_translate_command() for additional return codes.
*/
SATI_STATUS sati_move_small_translate_command(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io
)
{
// Translation of the sector count is performed differently for NCQ vs.
// other protocols.
if (sequence->device->capabilities & SATI_DEVICE_CAP_NCQ_SUPPORTED_ENABLE)
{
sati_move_set_ata_command(
sequence, ata_io, ATA_WRITE_FPDMA, ATA_READ_FPDMA
);
sati_move_ncq_translate_8_bit_sector_count(scsi_io, ata_io);
sequence->protocol = SAT_PROTOCOL_FPDMA;
}
else if (sequence->device->capabilities & SATI_DEVICE_CAP_48BIT_ENABLE)
{
U8 * cdb = sati_cb_get_cdb_address(scsi_io);
sati_move_small_udma_translate_command(
sequence, scsi_io, ata_io, ATA_WRITE_DMA_EXT, ATA_READ_DMA_EXT
);
// A read/write 6 with a 0 sector count indicates a transfer of 256
// sectors. As a result update the MSB (features expanded register)
// to indicate 256 sectors (0x100).
if (sati_get_cdb_byte(cdb, 4) == 0)
{
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
sati_set_ata_sector_count_exp(register_fis, 1);
}
}
else if (sequence->device->capabilities & SATI_DEVICE_CAP_UDMA_ENABLE)
{
sati_move_small_udma_translate_command(
sequence, scsi_io, ata_io, ATA_WRITE_DMA, ATA_READ_DMA
);
}
else
{
/**
* Currently the translation does not support devices incapable of
* handling the 48-bit feature set (i.e. 16 bits of sector count).
*/
sati_scsi_sense_data_construct(
sequence,
scsi_io,
SCSI_STATUS_CHECK_CONDITION,
SCSI_SENSE_ILLEGAL_REQUEST,
SCSI_ASC_INVALID_FIELD_IN_CDB,
SCSI_ASCQ_INVALID_FIELD_IN_CDB
);
return SATI_FAILURE_CHECK_RESPONSE_DATA;
}
return sati_move_6_translate_command(sequence, scsi_io, ata_io);
}
/**
* @brief This method provides the common translation functionality for
* the larger command descriptor blocks (10, 12, 16-byte CDBs).
* For more information on the parameters passed to this method,
* please reference sati_translate_command().
*
* @param[in] sector_count This parameter specifies the number of sectors
* to be transfered.
* @param[in] device_head This parameter specifies the contents to be
* written to the device head register.
*
* @return Indicate if the command translation succeeded.
* @retval SATI_FAILURE This value is returned if neither NCQ or DMA is
* supported by the target device.
* @see sati_move_set_sector_count() for additional return codes.
*/
SATI_STATUS sati_move_large_translate_command(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io,
U32 sector_count,
U8 * ata_device_head
)
{
SATI_STATUS status = SATI_SUCCESS;
U8 * cdb = sati_cb_get_cdb_address(scsi_io);
// Parts of translation (e.g. sector count) is performed differently
// for NCQ vs. other protocols.
if (sequence->device->capabilities & SATI_DEVICE_CAP_NCQ_SUPPORTED_ENABLE)
{
// if the user did not request to ignore FUA
if((sequence->device->capabilities & SATI_DEVICE_CAP_IGNORE_FUA)==0)
{
// Is the Force Unit Access bit set?
if (sati_get_cdb_byte(cdb, 1) & SCSI_MOVE_FUA_BIT_ENABLE)
*ata_device_head = ATA_DEV_HEAD_REG_FUA_ENABLE;
}
sati_move_set_ata_command(
sequence, ata_io, ATA_WRITE_FPDMA, ATA_READ_FPDMA
);
status = sati_move_set_sector_count(
sequence, scsi_io, ata_io, sector_count, TRUE
);
sequence->protocol = SAT_PROTOCOL_FPDMA;
}
else if (sequence->device->capabilities & SATI_DEVICE_CAP_48BIT_ENABLE)
{
// Is the Force Unit Access bit set? If it is, then error. We
// aren't supporting this yet for normal DMA.
if (sati_get_cdb_byte(cdb, 1) & SCSI_MOVE_FUA_BIT_ENABLE)
{
sati_scsi_sense_data_construct(
sequence,
scsi_io,
SCSI_STATUS_CHECK_CONDITION,
SCSI_SENSE_ILLEGAL_REQUEST,
SCSI_ASC_INVALID_FIELD_IN_CDB,
SCSI_ASCQ_INVALID_FIELD_IN_CDB
);
return SATI_FAILURE_CHECK_RESPONSE_DATA;
}
status = sati_move_large_udma_translate_command(
sequence,
scsi_io,
ata_io,
sector_count,
ATA_WRITE_DMA_EXT,
ATA_READ_DMA_EXT
);
}
else if (sequence->device->capabilities & SATI_DEVICE_CAP_UDMA_ENABLE)
{
status = sati_move_large_udma_translate_command(
sequence,
scsi_io,
ata_io,
sector_count,
ATA_WRITE_DMA,
ATA_READ_DMA
);
}
else
{
/**
* Currently the translation does not support devices incapable of
* handling the 48-bit feature set (i.e. 16 bits of sector count).
*/
sati_scsi_sense_data_construct(
sequence,
scsi_io,
SCSI_STATUS_CHECK_CONDITION,
SCSI_SENSE_ILLEGAL_REQUEST,
SCSI_ASC_INVALID_FIELD_IN_CDB,
SCSI_ASCQ_INVALID_FIELD_IN_CDB
);
return SATI_FAILURE_CHECK_RESPONSE_DATA;
}
return status;
}
/**
* @brief This method simply performs the functionality common to all
* payload data movement translations (i.e. READ/WRITE).
* For more information on the parameters passed to this method,
* please reference sati_translate_command().
*
* @param[in] device_head This parameter specifies the current contents
* to be written to the ATA task file (register FIS) device
* head register.
*
* @return none
*/
void sati_move_translate_command(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io,
U8 device_head
)
{
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
sati_set_ata_device_head(
register_fis, device_head | ATA_DEV_HEAD_REG_LBA_MODE_ENABLE
);
}
Reference in New Issue Copy Permalink