d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
6772fb679a
freebsd-dev/module/zfs/arc.c

5070 lines
142 KiB
C
Raw Normal View History

Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
Illumos #1748: desire support for reguid in zfs Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com> Reviewed by: Alexander Eremin <alexander.eremin@nexenta.com> Reviewed by: Alexander Stetsenko <ams@nexenta.com> Approved by: Richard Lowe <richlowe@richlowe.net> References: https://www.illumos.org/issues/1748 This commit modifies the user to kernel space ioctl ABI. Extra care should be taken when updating to ensure both the kernel modules and utilities are updated. If only the user space component is updated both the 'zpool events' command and the 'zpool reguid' command will not work until the kernel modules are updated. Ported by: Martin Matuska <martin@matuska.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #665
2011-11-11 22:07:54 +00:00
* Copyright 2011 Nexenta Systems, Inc. All rights reserved.
* Copyright (c) 2011 by Delphix. All rights reserved.
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
*/
/*
* DVA-based Adjustable Replacement Cache
*
* While much of the theory of operation used here is
* based on the self-tuning, low overhead replacement cache
* presented by Megiddo and Modha at FAST 2003, there are some
* significant differences:
*
* 1. The Megiddo and Modha model assumes any page is evictable.
* Pages in its cache cannot be "locked" into memory. This makes
* the eviction algorithm simple: evict the last page in the list.
* This also make the performance characteristics easy to reason
* about. Our cache is not so simple. At any given moment, some
* subset of the blocks in the cache are un-evictable because we
* have handed out a reference to them. Blocks are only evictable
* when there are no external references active. This makes
* eviction far more problematic: we choose to evict the evictable
* blocks that are the "lowest" in the list.
*
* There are times when it is not possible to evict the requested
* space. In these circumstances we are unable to adjust the cache
* size. To prevent the cache growing unbounded at these times we
* implement a "cache throttle" that slows the flow of new data
* into the cache until we can make space available.
*
* 2. The Megiddo and Modha model assumes a fixed cache size.
* Pages are evicted when the cache is full and there is a cache
* miss. Our model has a variable sized cache. It grows with
* high use, but also tries to react to memory pressure from the
* operating system: decreasing its size when system memory is
* tight.
*
* 3. The Megiddo and Modha model assumes a fixed page size. All
* elements of the cache are therefor exactly the same size. So
* when adjusting the cache size following a cache miss, its simply
* a matter of choosing a single page to evict. In our model, we
* have variable sized cache blocks (rangeing from 512 bytes to
* 128K bytes). We therefor choose a set of blocks to evict to make
* space for a cache miss that approximates as closely as possible
* the space used by the new block.
*
* See also: "ARC: A Self-Tuning, Low Overhead Replacement Cache"
* by N. Megiddo & D. Modha, FAST 2003
*/
/*
* The locking model:
*
* A new reference to a cache buffer can be obtained in two
* ways: 1) via a hash table lookup using the DVA as a key,
* or 2) via one of the ARC lists. The arc_read() interface
* uses method 1, while the internal arc algorithms for
* adjusting the cache use method 2. We therefor provide two
* types of locks: 1) the hash table lock array, and 2) the
* arc list locks.
*
Illumos #2618 arc.c mistypes in the comments 2618 arc.c mistypes in the comments Reviewed by: Jason King <jason.brian.king@gmail.com> Reviewed by: Josef Sipek <jeffpc@josefsipek.net> Approved by: Richard Lowe <richlowe@richlowe.net> References: illumos/illumos-gate@fc98fea58e89224f6f13d7fae246d6cb5dfa35ea illumos changeset: 13721:5b51a16a186f https://www.illumos.org/issues/2618 Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-01-11 16:54:18 +00:00
* Buffers do not have their own mutexes, rather they rely on the
* hash table mutexes for the bulk of their protection (i.e. most
* fields in the arc_buf_hdr_t are protected by these mutexes).
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
*
* buf_hash_find() returns the appropriate mutex (held) when it
* locates the requested buffer in the hash table. It returns
* NULL for the mutex if the buffer was not in the table.
*
* buf_hash_remove() expects the appropriate hash mutex to be
* already held before it is invoked.
*
* Each arc state also has a mutex which is used to protect the
* buffer list associated with the state. When attempting to
* obtain a hash table lock while holding an arc list lock you
* must use: mutex_tryenter() to avoid deadlock. Also note that
* the active state mutex must be held before the ghost state mutex.
*
* Arc buffers may have an associated eviction callback function.
* This function will be invoked prior to removing the buffer (e.g.
* in arc_do_user_evicts()). Note however that the data associated
* with the buffer may be evicted prior to the callback. The callback
* must be made with *no locks held* (to prevent deadlock). Additionally,
* the users of callbacks must ensure that their private data is
* protected from simultaneous callbacks from arc_buf_evict()
* and arc_do_user_evicts().
*
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
* It as also possible to register a callback which is run when the
* arc_meta_limit is reached and no buffers can be safely evicted. In
* this case the arc user should drop a reference on some arc buffers so
* they can be reclaimed and the arc_meta_limit honored. For example,
* when using the ZPL each dentry holds a references on a znode. These
* dentries must be pruned before the arc buffer holding the znode can
* be safely evicted.
*
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
* Note that the majority of the performance stats are manipulated
* with atomic operations.
*
* The L2ARC uses the l2arc_buflist_mtx global mutex for the following:
*
* - L2ARC buflist creation
* - L2ARC buflist eviction
* - L2ARC write completion, which walks L2ARC buflists
* - ARC header destruction, as it removes from L2ARC buflists
* - ARC header release, as it removes from L2ARC buflists
*/
#include <sys/spa.h>
#include <sys/zio.h>
#include <sys/zfs_context.h>
#include <sys/arc.h>
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
#include <sys/vdev.h>
Rebase master to b117
2009-07-02 22:44:48 +00:00
#include <sys/vdev_impl.h>
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
#ifdef _KERNEL
#include <sys/vmsystm.h>
#include <vm/anon.h>
#include <sys/fs/swapnode.h>
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
#include <sys/zpl.h>
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
#endif
#include <sys/callb.h>
#include <sys/kstat.h>
Add 'dmu_tx' kstats entry Keep counters for the various reasons that a thread may end up in txg_wait_open() waiting on a new txg. This can be useful when attempting to determine why a particular workload is under performing. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-01-20 18:58:57 +00:00
#include <sys/dmu_tx.h>
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
#include <zfs_fletcher.h>
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
static kmutex_t arc_reclaim_thr_lock;
static kcondvar_t arc_reclaim_thr_cv; /* used to signal reclaim thr */
static uint8_t arc_thread_exit;
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
/* number of bytes to prune from caches when at arc_meta_limit is reached */
uint_t arc_meta_prune = 1048576;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
typedef enum arc_reclaim_strategy {
ARC_RECLAIM_AGGR, /* Aggressive reclaim strategy */
ARC_RECLAIM_CONS /* Conservative reclaim strategy */
} arc_reclaim_strategy_t;
/* number of seconds before growing cache again */
Integrate ARC more tightly with Linux Under Solaris the ARC was designed to stay one step ahead of the VM subsystem. It would attempt to recognize low memory situtions before they occured and evict data from the cache. It would also make assessments about if there was enough free memory to perform a specific operation. This was all possible because Solaris exposes a fairly decent view of the memory state of the system to other kernel threads. Linux on the other hand does not make this information easily available. To avoid extensive modifications to the ARC the SPL attempts to provide these same interfaces. While this works it is not ideal and problems can arise when the ARC and Linux have different ideas about when your out of memory. This has manifested itself in the past as a spinning arc_reclaim_thread. This patch abandons the emulated Solaris interfaces in favor of the prefered Linux interface. That means moving the bulk of the memory reclaim logic out of the arc_reclaim_thread and in to the evict driven shrinker callback. The Linux VM will call this function when it needs memory. The ARC is then responsible for attempting to free the requested amount of memory if possible. Several interfaces have been modified to accomidate this approach, however the basic user space implementation remains the same. The following changes almost exclusively just apply to the kernel implementation. * Removed the hdr_recl() reclaim callback which is redundant with the broader arc_shrinker_func(). * Reduced arc_grow_retry to 5 seconds from 60. This is now used internally in the ARC with arc_no_grow to indicate that direct reclaim was recently performed. This typically indicates a rapid change in memory demands which the kswapd threads were unable to keep ahead of. As long as direct reclaim is happening once every 5 seconds arc growth will be paused to avoid further contributing to the existing memory pressure. The more common indirect reclaim paths will not set arc_no_grow. * arc_shrink() has been extended to take the number of bytes by which arc_c should be reduced. This allows for a more granual reduction of the arc target. Since the kernel provides a reclaim value to the arc_shrinker_func() this value is used instead of 1<<arc_shrink_shift. * arc_reclaim_needed() has been removed. It was used to determine if the system was under memory pressure and relied extensively on Solaris specific VM interfaces. In most case the new code just checks arc_no_grow which indicates that within the last arc_grow_retry seconds direct memory reclaim occurred. * arc_memory_throttle() has been updated to always include the amount of evictable memory (arc and page cache) in its free space calculations. This space is largely available in most call paths due to direct memory reclaim. * The Solaris pageout code was also removed to avoid confusion. It has always been disabled due to proc_pageout being defined as NULL in the Linux port. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-13 21:29:16 +00:00
static int arc_grow_retry = 5;
/* expiration time for arc_no_grow */
static clock_t arc_grow_time = 0;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Rebase master to b108
2009-02-18 20:51:31 +00:00
/* shift of arc_c for calculating both min and max arc_p */
static int arc_p_min_shift = 4;
/* log2(fraction of arc to reclaim) */
static int arc_shrink_shift = 5;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* minimum lifespan of a prefetch block in clock ticks
* (initialized in arc_init())
*/
static int arc_min_prefetch_lifespan;
static int arc_dead;
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
/*
* The arc has filled available memory and has now warmed up.
*/
static boolean_t arc_warm;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* These tunables are for performance analysis.
*/
Add linux kernel module support Setup linux kernel module support, this includes: - zfs context for kernel/user - kernel module build system integration - kernel module macros - kernel module symbol export - kernel module options Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:49:16 +00:00
unsigned long zfs_arc_max = 0;
unsigned long zfs_arc_min = 0;
unsigned long zfs_arc_meta_limit = 0;
Rebase master to b108
2009-02-18 20:51:31 +00:00
int zfs_arc_grow_retry = 0;
int zfs_arc_shrink_shift = 0;
int zfs_arc_p_min_shift = 0;
Illumos #3145, #3212 3145 single-copy arc 3212 ztest: race condition between vdev_online() and spa_vdev_remove() Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Eric Schrock <eric.schrock@delphix.com> Reviewed by: Justin T. Gibbs <gibbs@scsiguy.com> Approved by: Eric Schrock <eric.schrock@delphix.com> References: illumos-gate/commit/9253d63df408bb48584e0b1abfcc24ef2472382e illumos changeset: 13840:97fd5cdf328a https://www.illumos.org/issues/3145 https://www.illumos.org/issues/3212 Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #989 Closes #1137
2012-12-21 22:57:09 +00:00
int zfs_disable_dup_eviction = 0;
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
int zfs_arc_meta_prune = 0;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* Note that buffers can be in one of 6 states:
* ARC_anon - anonymous (discussed below)
* ARC_mru - recently used, currently cached
* ARC_mru_ghost - recentely used, no longer in cache
* ARC_mfu - frequently used, currently cached
* ARC_mfu_ghost - frequently used, no longer in cache
* ARC_l2c_only - exists in L2ARC but not other states
* When there are no active references to the buffer, they are
* are linked onto a list in one of these arc states. These are
* the only buffers that can be evicted or deleted. Within each
* state there are multiple lists, one for meta-data and one for
* non-meta-data. Meta-data (indirect blocks, blocks of dnodes,
* etc.) is tracked separately so that it can be managed more
* explicitly: favored over data, limited explicitly.
*
* Anonymous buffers are buffers that are not associated with
* a DVA. These are buffers that hold dirty block copies
* before they are written to stable storage. By definition,
* they are "ref'd" and are considered part of arc_mru
* that cannot be freed. Generally, they will aquire a DVA
* as they are written and migrate onto the arc_mru list.
*
* The ARC_l2c_only state is for buffers that are in the second
* level ARC but no longer in any of the ARC_m* lists. The second
* level ARC itself may also contain buffers that are in any of
* the ARC_m* states - meaning that a buffer can exist in two
* places. The reason for the ARC_l2c_only state is to keep the
* buffer header in the hash table, so that reads that hit the
* second level ARC benefit from these fast lookups.
*/
typedef struct arc_state {
list_t arcs_list[ARC_BUFC_NUMTYPES]; /* list of evictable buffers */
uint64_t arcs_lsize[ARC_BUFC_NUMTYPES]; /* amount of evictable data */
uint64_t arcs_size; /* total amount of data in this state */
kmutex_t arcs_mtx;
} arc_state_t;
/* The 6 states: */
static arc_state_t ARC_anon;
static arc_state_t ARC_mru;
static arc_state_t ARC_mru_ghost;
static arc_state_t ARC_mfu;
static arc_state_t ARC_mfu_ghost;
static arc_state_t ARC_l2c_only;
typedef struct arc_stats {
kstat_named_t arcstat_hits;
kstat_named_t arcstat_misses;
kstat_named_t arcstat_demand_data_hits;
kstat_named_t arcstat_demand_data_misses;
kstat_named_t arcstat_demand_metadata_hits;
kstat_named_t arcstat_demand_metadata_misses;
kstat_named_t arcstat_prefetch_data_hits;
kstat_named_t arcstat_prefetch_data_misses;
kstat_named_t arcstat_prefetch_metadata_hits;
kstat_named_t arcstat_prefetch_metadata_misses;
kstat_named_t arcstat_mru_hits;
kstat_named_t arcstat_mru_ghost_hits;
kstat_named_t arcstat_mfu_hits;
kstat_named_t arcstat_mfu_ghost_hits;
kstat_named_t arcstat_deleted;
kstat_named_t arcstat_recycle_miss;
kstat_named_t arcstat_mutex_miss;
kstat_named_t arcstat_evict_skip;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
kstat_named_t arcstat_evict_l2_cached;
kstat_named_t arcstat_evict_l2_eligible;
kstat_named_t arcstat_evict_l2_ineligible;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
kstat_named_t arcstat_hash_elements;
kstat_named_t arcstat_hash_elements_max;
kstat_named_t arcstat_hash_collisions;
kstat_named_t arcstat_hash_chains;
kstat_named_t arcstat_hash_chain_max;
kstat_named_t arcstat_p;
kstat_named_t arcstat_c;
kstat_named_t arcstat_c_min;
kstat_named_t arcstat_c_max;
kstat_named_t arcstat_size;
kstat_named_t arcstat_hdr_size;
Rebase master to b108
2009-02-18 20:51:31 +00:00
kstat_named_t arcstat_data_size;
kstat_named_t arcstat_other_size;
Add arc_state_t stats to arcstats To ensure the arc is behaving properly we need greater visibility in to exactly how it's managing the systems memory. This patch takes one step in that direction be adding the current arc_state_t for the anon, mru, mru_ghost, mfu, and mfs_ghost lists. The l2 arc_state_t is already well represented in the arcstats. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-01-30 21:28:40 +00:00
kstat_named_t arcstat_anon_size;
kstat_named_t arcstat_anon_evict_data;
kstat_named_t arcstat_anon_evict_metadata;
kstat_named_t arcstat_mru_size;
kstat_named_t arcstat_mru_evict_data;
kstat_named_t arcstat_mru_evict_metadata;
kstat_named_t arcstat_mru_ghost_size;
kstat_named_t arcstat_mru_ghost_evict_data;
kstat_named_t arcstat_mru_ghost_evict_metadata;
kstat_named_t arcstat_mfu_size;
kstat_named_t arcstat_mfu_evict_data;
kstat_named_t arcstat_mfu_evict_metadata;
kstat_named_t arcstat_mfu_ghost_size;
kstat_named_t arcstat_mfu_ghost_evict_data;
kstat_named_t arcstat_mfu_ghost_evict_metadata;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
kstat_named_t arcstat_l2_hits;
kstat_named_t arcstat_l2_misses;
kstat_named_t arcstat_l2_feeds;
kstat_named_t arcstat_l2_rw_clash;
Rebase master to b108
2009-02-18 20:51:31 +00:00
kstat_named_t arcstat_l2_read_bytes;
kstat_named_t arcstat_l2_write_bytes;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
kstat_named_t arcstat_l2_writes_sent;
kstat_named_t arcstat_l2_writes_done;
kstat_named_t arcstat_l2_writes_error;
kstat_named_t arcstat_l2_writes_hdr_miss;
kstat_named_t arcstat_l2_evict_lock_retry;
kstat_named_t arcstat_l2_evict_reading;
kstat_named_t arcstat_l2_free_on_write;
kstat_named_t arcstat_l2_abort_lowmem;
kstat_named_t arcstat_l2_cksum_bad;
kstat_named_t arcstat_l2_io_error;
kstat_named_t arcstat_l2_size;
kstat_named_t arcstat_l2_hdr_size;
kstat_named_t arcstat_memory_throttle_count;
Illumos #3145, #3212 3145 single-copy arc 3212 ztest: race condition between vdev_online() and spa_vdev_remove() Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Eric Schrock <eric.schrock@delphix.com> Reviewed by: Justin T. Gibbs <gibbs@scsiguy.com> Approved by: Eric Schrock <eric.schrock@delphix.com> References: illumos-gate/commit/9253d63df408bb48584e0b1abfcc24ef2472382e illumos changeset: 13840:97fd5cdf328a https://www.illumos.org/issues/3145 https://www.illumos.org/issues/3212 Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #989 Closes #1137
2012-12-21 22:57:09 +00:00
kstat_named_t arcstat_duplicate_buffers;
kstat_named_t arcstat_duplicate_buffers_size;
kstat_named_t arcstat_duplicate_reads;
Add direct+indirect ARC reclaim Under OpenSolaris all memory reclaim is done asyncronously. Under Linux memory reclaim is done asynchronously _and_ synchronously. When a process allocates memory with GFP_KERNEL it explicitly allows the kernel to do reclaim on its behalf to satify the allocation. If that GFP_KERNEL allocation fails the kernel may take more drastic measures to reclaim the memory such as killing user space processes. This was observed to happen with ZFS because the ARC could consume a large fraction of the system memory but no synchronous reclaim could be performed on it. The result was GFP_KERNEL allocations could fail resulting in OOM events, and only moments latter the arc_reclaim thread would free unused memory from the ARC. This change leaves the arc_thread in place to manage the fundamental ARC behavior. But it adds a synchronous (direct) reclaim path for the ARC which can be called when memory is badly needed. It also adds an asynchronous (indirect) reclaim path which is called much more frequently to prune the ARC slab caches.
2011-03-30 01:08:59 +00:00
kstat_named_t arcstat_memory_direct_count;
kstat_named_t arcstat_memory_indirect_count;
Add missing arcstats The following useful values were missing the arcstats. This change adds them in to provide greater visibility in to the arcs behavior. arc_no_grow 4 0 arc_tempreserve 4 0 arc_loaned_bytes 4 0 arc_meta_used 4 624774592 arc_meta_limit 4 400785408 arc_meta_max 4 625594176
2011-03-24 19:13:55 +00:00
kstat_named_t arcstat_no_grow;
kstat_named_t arcstat_tempreserve;
kstat_named_t arcstat_loaned_bytes;
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
kstat_named_t arcstat_prune;
Add missing arcstats The following useful values were missing the arcstats. This change adds them in to provide greater visibility in to the arcs behavior. arc_no_grow 4 0 arc_tempreserve 4 0 arc_loaned_bytes 4 0 arc_meta_used 4 624774592 arc_meta_limit 4 400785408 arc_meta_max 4 625594176
2011-03-24 19:13:55 +00:00
kstat_named_t arcstat_meta_used;
kstat_named_t arcstat_meta_limit;
kstat_named_t arcstat_meta_max;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
} arc_stats_t;
static arc_stats_t arc_stats = {
{ "hits", KSTAT_DATA_UINT64 },
{ "misses", KSTAT_DATA_UINT64 },
{ "demand_data_hits", KSTAT_DATA_UINT64 },
{ "demand_data_misses", KSTAT_DATA_UINT64 },
{ "demand_metadata_hits", KSTAT_DATA_UINT64 },
{ "demand_metadata_misses", KSTAT_DATA_UINT64 },
{ "prefetch_data_hits", KSTAT_DATA_UINT64 },
{ "prefetch_data_misses", KSTAT_DATA_UINT64 },
{ "prefetch_metadata_hits", KSTAT_DATA_UINT64 },
{ "prefetch_metadata_misses", KSTAT_DATA_UINT64 },
{ "mru_hits", KSTAT_DATA_UINT64 },
{ "mru_ghost_hits", KSTAT_DATA_UINT64 },
{ "mfu_hits", KSTAT_DATA_UINT64 },
{ "mfu_ghost_hits", KSTAT_DATA_UINT64 },
{ "deleted", KSTAT_DATA_UINT64 },
{ "recycle_miss", KSTAT_DATA_UINT64 },
{ "mutex_miss", KSTAT_DATA_UINT64 },
{ "evict_skip", KSTAT_DATA_UINT64 },
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
{ "evict_l2_cached", KSTAT_DATA_UINT64 },
{ "evict_l2_eligible", KSTAT_DATA_UINT64 },
{ "evict_l2_ineligible", KSTAT_DATA_UINT64 },
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
{ "hash_elements", KSTAT_DATA_UINT64 },
{ "hash_elements_max", KSTAT_DATA_UINT64 },
{ "hash_collisions", KSTAT_DATA_UINT64 },
{ "hash_chains", KSTAT_DATA_UINT64 },
{ "hash_chain_max", KSTAT_DATA_UINT64 },
{ "p", KSTAT_DATA_UINT64 },
{ "c", KSTAT_DATA_UINT64 },
{ "c_min", KSTAT_DATA_UINT64 },
{ "c_max", KSTAT_DATA_UINT64 },
{ "size", KSTAT_DATA_UINT64 },
{ "hdr_size", KSTAT_DATA_UINT64 },
Rebase master to b108
2009-02-18 20:51:31 +00:00
{ "data_size", KSTAT_DATA_UINT64 },
{ "other_size", KSTAT_DATA_UINT64 },
Add arc_state_t stats to arcstats To ensure the arc is behaving properly we need greater visibility in to exactly how it's managing the systems memory. This patch takes one step in that direction be adding the current arc_state_t for the anon, mru, mru_ghost, mfu, and mfs_ghost lists. The l2 arc_state_t is already well represented in the arcstats. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-01-30 21:28:40 +00:00
{ "anon_size", KSTAT_DATA_UINT64 },
{ "anon_evict_data", KSTAT_DATA_UINT64 },
{ "anon_evict_metadata", KSTAT_DATA_UINT64 },
{ "mru_size", KSTAT_DATA_UINT64 },
{ "mru_evict_data", KSTAT_DATA_UINT64 },
{ "mru_evict_metadata", KSTAT_DATA_UINT64 },
{ "mru_ghost_size", KSTAT_DATA_UINT64 },
{ "mru_ghost_evict_data", KSTAT_DATA_UINT64 },
{ "mru_ghost_evict_metadata", KSTAT_DATA_UINT64 },
{ "mfu_size", KSTAT_DATA_UINT64 },
{ "mfu_evict_data", KSTAT_DATA_UINT64 },
{ "mfu_evict_metadata", KSTAT_DATA_UINT64 },
{ "mfu_ghost_size", KSTAT_DATA_UINT64 },
{ "mfu_ghost_evict_data", KSTAT_DATA_UINT64 },
{ "mfu_ghost_evict_metadata", KSTAT_DATA_UINT64 },
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
{ "l2_hits", KSTAT_DATA_UINT64 },
{ "l2_misses", KSTAT_DATA_UINT64 },
{ "l2_feeds", KSTAT_DATA_UINT64 },
{ "l2_rw_clash", KSTAT_DATA_UINT64 },
Rebase master to b108
2009-02-18 20:51:31 +00:00
{ "l2_read_bytes", KSTAT_DATA_UINT64 },
{ "l2_write_bytes", KSTAT_DATA_UINT64 },
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
{ "l2_writes_sent", KSTAT_DATA_UINT64 },
{ "l2_writes_done", KSTAT_DATA_UINT64 },
{ "l2_writes_error", KSTAT_DATA_UINT64 },
{ "l2_writes_hdr_miss", KSTAT_DATA_UINT64 },
{ "l2_evict_lock_retry", KSTAT_DATA_UINT64 },
{ "l2_evict_reading", KSTAT_DATA_UINT64 },
{ "l2_free_on_write", KSTAT_DATA_UINT64 },
{ "l2_abort_lowmem", KSTAT_DATA_UINT64 },
{ "l2_cksum_bad", KSTAT_DATA_UINT64 },
{ "l2_io_error", KSTAT_DATA_UINT64 },
{ "l2_size", KSTAT_DATA_UINT64 },
{ "l2_hdr_size", KSTAT_DATA_UINT64 },
Add missing arcstats The following useful values were missing the arcstats. This change adds them in to provide greater visibility in to the arcs behavior. arc_no_grow 4 0 arc_tempreserve 4 0 arc_loaned_bytes 4 0 arc_meta_used 4 624774592 arc_meta_limit 4 400785408 arc_meta_max 4 625594176
2011-03-24 19:13:55 +00:00
{ "memory_throttle_count", KSTAT_DATA_UINT64 },
Illumos #3145, #3212 3145 single-copy arc 3212 ztest: race condition between vdev_online() and spa_vdev_remove() Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Eric Schrock <eric.schrock@delphix.com> Reviewed by: Justin T. Gibbs <gibbs@scsiguy.com> Approved by: Eric Schrock <eric.schrock@delphix.com> References: illumos-gate/commit/9253d63df408bb48584e0b1abfcc24ef2472382e illumos changeset: 13840:97fd5cdf328a https://www.illumos.org/issues/3145 https://www.illumos.org/issues/3212 Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #989 Closes #1137
2012-12-21 22:57:09 +00:00
{ "duplicate_buffers", KSTAT_DATA_UINT64 },
{ "duplicate_buffers_size", KSTAT_DATA_UINT64 },
{ "duplicate_reads", KSTAT_DATA_UINT64 },
Add direct+indirect ARC reclaim Under OpenSolaris all memory reclaim is done asyncronously. Under Linux memory reclaim is done asynchronously _and_ synchronously. When a process allocates memory with GFP_KERNEL it explicitly allows the kernel to do reclaim on its behalf to satify the allocation. If that GFP_KERNEL allocation fails the kernel may take more drastic measures to reclaim the memory such as killing user space processes. This was observed to happen with ZFS because the ARC could consume a large fraction of the system memory but no synchronous reclaim could be performed on it. The result was GFP_KERNEL allocations could fail resulting in OOM events, and only moments latter the arc_reclaim thread would free unused memory from the ARC. This change leaves the arc_thread in place to manage the fundamental ARC behavior. But it adds a synchronous (direct) reclaim path for the ARC which can be called when memory is badly needed. It also adds an asynchronous (indirect) reclaim path which is called much more frequently to prune the ARC slab caches.
2011-03-30 01:08:59 +00:00
{ "memory_direct_count", KSTAT_DATA_UINT64 },
{ "memory_indirect_count", KSTAT_DATA_UINT64 },
Add missing arcstats The following useful values were missing the arcstats. This change adds them in to provide greater visibility in to the arcs behavior. arc_no_grow 4 0 arc_tempreserve 4 0 arc_loaned_bytes 4 0 arc_meta_used 4 624774592 arc_meta_limit 4 400785408 arc_meta_max 4 625594176
2011-03-24 19:13:55 +00:00
{ "arc_no_grow", KSTAT_DATA_UINT64 },
{ "arc_tempreserve", KSTAT_DATA_UINT64 },
{ "arc_loaned_bytes", KSTAT_DATA_UINT64 },
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
{ "arc_prune", KSTAT_DATA_UINT64 },
Add missing arcstats The following useful values were missing the arcstats. This change adds them in to provide greater visibility in to the arcs behavior. arc_no_grow 4 0 arc_tempreserve 4 0 arc_loaned_bytes 4 0 arc_meta_used 4 624774592 arc_meta_limit 4 400785408 arc_meta_max 4 625594176
2011-03-24 19:13:55 +00:00
{ "arc_meta_used", KSTAT_DATA_UINT64 },
{ "arc_meta_limit", KSTAT_DATA_UINT64 },
{ "arc_meta_max", KSTAT_DATA_UINT64 },
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
};
#define ARCSTAT(stat) (arc_stats.stat.value.ui64)
#define ARCSTAT_INCR(stat, val) \
atomic_add_64(&arc_stats.stat.value.ui64, (val));
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
#define ARCSTAT_BUMP(stat) ARCSTAT_INCR(stat, 1)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
#define ARCSTAT_BUMPDOWN(stat) ARCSTAT_INCR(stat, -1)
#define ARCSTAT_MAX(stat, val) { \
uint64_t m; \
while ((val) > (m = arc_stats.stat.value.ui64) && \
(m != atomic_cas_64(&arc_stats.stat.value.ui64, m, (val)))) \
continue; \
}
#define ARCSTAT_MAXSTAT(stat) \
ARCSTAT_MAX(stat##_max, arc_stats.stat.value.ui64)
/*
* We define a macro to allow ARC hits/misses to be easily broken down by
* two separate conditions, giving a total of four different subtypes for
* each of hits and misses (so eight statistics total).
*/
#define ARCSTAT_CONDSTAT(cond1, stat1, notstat1, cond2, stat2, notstat2, stat) \
if (cond1) { \
if (cond2) { \
ARCSTAT_BUMP(arcstat_##stat1##_##stat2##_##stat); \
} else { \
ARCSTAT_BUMP(arcstat_##stat1##_##notstat2##_##stat); \
} \
} else { \
if (cond2) { \
ARCSTAT_BUMP(arcstat_##notstat1##_##stat2##_##stat); \
} else { \
ARCSTAT_BUMP(arcstat_##notstat1##_##notstat2##_##stat);\
} \
}
kstat_t *arc_ksp;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
static arc_state_t *arc_anon;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
static arc_state_t *arc_mru;
static arc_state_t *arc_mru_ghost;
static arc_state_t *arc_mfu;
static arc_state_t *arc_mfu_ghost;
static arc_state_t *arc_l2c_only;
/*
* There are several ARC variables that are critical to export as kstats --
* but we don't want to have to grovel around in the kstat whenever we wish to
* manipulate them. For these variables, we therefore define them to be in
* terms of the statistic variable. This assures that we are not introducing
* the possibility of inconsistency by having shadow copies of the variables,
* while still allowing the code to be readable.
*/
#define arc_size ARCSTAT(arcstat_size) /* actual total arc size */
#define arc_p ARCSTAT(arcstat_p) /* target size of MRU */
#define arc_c ARCSTAT(arcstat_c) /* target size of cache */
#define arc_c_min ARCSTAT(arcstat_c_min) /* min target cache size */
#define arc_c_max ARCSTAT(arcstat_c_max) /* max target cache size */
Add missing arcstats The following useful values were missing the arcstats. This change adds them in to provide greater visibility in to the arcs behavior. arc_no_grow 4 0 arc_tempreserve 4 0 arc_loaned_bytes 4 0 arc_meta_used 4 624774592 arc_meta_limit 4 400785408 arc_meta_max 4 625594176
2011-03-24 19:13:55 +00:00
#define arc_no_grow ARCSTAT(arcstat_no_grow)
#define arc_tempreserve ARCSTAT(arcstat_tempreserve)
#define arc_loaned_bytes ARCSTAT(arcstat_loaned_bytes)
#define arc_meta_used ARCSTAT(arcstat_meta_used)
#define arc_meta_limit ARCSTAT(arcstat_meta_limit)
#define arc_meta_max ARCSTAT(arcstat_meta_max)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
typedef struct l2arc_buf_hdr l2arc_buf_hdr_t;
typedef struct arc_callback arc_callback_t;
struct arc_callback {
void *acb_private;
arc_done_func_t *acb_done;
arc_buf_t *acb_buf;
zio_t *acb_zio_dummy;
arc_callback_t *acb_next;
};
typedef struct arc_write_callback arc_write_callback_t;
struct arc_write_callback {
void *awcb_private;
arc_done_func_t *awcb_ready;
arc_done_func_t *awcb_done;
arc_buf_t *awcb_buf;
};
struct arc_buf_hdr {
/* protected by hash lock */
dva_t b_dva;
uint64_t b_birth;
uint64_t b_cksum0;
kmutex_t b_freeze_lock;
zio_cksum_t *b_freeze_cksum;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
void *b_thawed;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
arc_buf_hdr_t *b_hash_next;
arc_buf_t *b_buf;
uint32_t b_flags;
uint32_t b_datacnt;
arc_callback_t *b_acb;
kcondvar_t b_cv;
/* immutable */
arc_buf_contents_t b_type;
uint64_t b_size;
Rebase master to b108
2009-02-18 20:51:31 +00:00
uint64_t b_spa;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/* protected by arc state mutex */
arc_state_t *b_state;
list_node_t b_arc_node;
/* updated atomically */
clock_t b_arc_access;
/* self protecting */
refcount_t b_refcnt;
l2arc_buf_hdr_t *b_l2hdr;
list_node_t b_l2node;
};
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
static list_t arc_prune_list;
static kmutex_t arc_prune_mtx;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
static arc_buf_t *arc_eviction_list;
static kmutex_t arc_eviction_mtx;
static arc_buf_hdr_t arc_eviction_hdr;
static void arc_get_data_buf(arc_buf_t *buf);
static void arc_access(arc_buf_hdr_t *buf, kmutex_t *hash_lock);
static int arc_evict_needed(arc_buf_contents_t type);
Rebase master to b108
2009-02-18 20:51:31 +00:00
static void arc_evict_ghost(arc_state_t *state, uint64_t spa, int64_t bytes);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
static boolean_t l2arc_write_eligible(uint64_t spa_guid, arc_buf_hdr_t *ab);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
#define GHOST_STATE(state) \
((state) == arc_mru_ghost || (state) == arc_mfu_ghost || \
(state) == arc_l2c_only)
/*
* Private ARC flags. These flags are private ARC only flags that will show up
* in b_flags in the arc_hdr_buf_t. Some flags are publicly declared, and can
* be passed in as arc_flags in things like arc_read. However, these flags
* should never be passed and should only be set by ARC code. When adding new
* public flags, make sure not to smash the private ones.
*/
#define ARC_IN_HASH_TABLE (1 << 9) /* this buffer is hashed */
#define ARC_IO_IN_PROGRESS (1 << 10) /* I/O in progress for buf */
#define ARC_IO_ERROR (1 << 11) /* I/O failed for buf */
#define ARC_FREED_IN_READ (1 << 12) /* buf freed while in read */
#define ARC_BUF_AVAILABLE (1 << 13) /* block not in active use */
#define ARC_INDIRECT (1 << 14) /* this is an indirect block */
#define ARC_FREE_IN_PROGRESS (1 << 15) /* hdr about to be freed */
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
#define ARC_L2_WRITING (1 << 16) /* L2ARC write in progress */
#define ARC_L2_EVICTED (1 << 17) /* evicted during I/O */
#define ARC_L2_WRITE_HEAD (1 << 18) /* head of write list */
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
#define HDR_IN_HASH_TABLE(hdr) ((hdr)->b_flags & ARC_IN_HASH_TABLE)
#define HDR_IO_IN_PROGRESS(hdr) ((hdr)->b_flags & ARC_IO_IN_PROGRESS)
#define HDR_IO_ERROR(hdr) ((hdr)->b_flags & ARC_IO_ERROR)
Rebase master to b108
2009-02-18 20:51:31 +00:00
#define HDR_PREFETCH(hdr) ((hdr)->b_flags & ARC_PREFETCH)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
#define HDR_FREED_IN_READ(hdr) ((hdr)->b_flags & ARC_FREED_IN_READ)
#define HDR_BUF_AVAILABLE(hdr) ((hdr)->b_flags & ARC_BUF_AVAILABLE)
#define HDR_FREE_IN_PROGRESS(hdr) ((hdr)->b_flags & ARC_FREE_IN_PROGRESS)
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
#define HDR_L2CACHE(hdr) ((hdr)->b_flags & ARC_L2CACHE)
#define HDR_L2_READING(hdr) ((hdr)->b_flags & ARC_IO_IN_PROGRESS && \
(hdr)->b_l2hdr != NULL)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
#define HDR_L2_WRITING(hdr) ((hdr)->b_flags & ARC_L2_WRITING)
#define HDR_L2_EVICTED(hdr) ((hdr)->b_flags & ARC_L2_EVICTED)
#define HDR_L2_WRITE_HEAD(hdr) ((hdr)->b_flags & ARC_L2_WRITE_HEAD)
/*
* Other sizes
*/
#define HDR_SIZE ((int64_t)sizeof (arc_buf_hdr_t))
#define L2HDR_SIZE ((int64_t)sizeof (l2arc_buf_hdr_t))
/*
* Hash table routines
*/
Add linux kernel memory support Required kmem/vmem changes Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:46:09 +00:00
#define HT_LOCK_ALIGN 64
#define HT_LOCK_PAD (P2NPHASE(sizeof (kmutex_t), (HT_LOCK_ALIGN)))
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
struct ht_lock {
kmutex_t ht_lock;
#ifdef _KERNEL
Add linux kernel memory support Required kmem/vmem changes Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:46:09 +00:00
unsigned char pad[HT_LOCK_PAD];
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
#endif
};
#define BUF_LOCKS 256
typedef struct buf_hash_table {
uint64_t ht_mask;
arc_buf_hdr_t **ht_table;
struct ht_lock ht_locks[BUF_LOCKS];
} buf_hash_table_t;
static buf_hash_table_t buf_hash_table;
#define BUF_HASH_INDEX(spa, dva, birth) \
(buf_hash(spa, dva, birth) & buf_hash_table.ht_mask)
#define BUF_HASH_LOCK_NTRY(idx) (buf_hash_table.ht_locks[idx & (BUF_LOCKS-1)])
#define BUF_HASH_LOCK(idx) (&(BUF_HASH_LOCK_NTRY(idx).ht_lock))
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
#define HDR_LOCK(hdr) \
(BUF_HASH_LOCK(BUF_HASH_INDEX(hdr->b_spa, &hdr->b_dva, hdr->b_birth)))
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
uint64_t zfs_crc64_table[256];
/*
* Level 2 ARC
*/
#define L2ARC_WRITE_SIZE (8 * 1024 * 1024) /* initial write max */
Rebase master to b108
2009-02-18 20:51:31 +00:00
#define L2ARC_HEADROOM 2 /* num of writes */
#define L2ARC_FEED_SECS 1 /* caching interval secs */
#define L2ARC_FEED_MIN_MS 200 /* min caching interval ms */
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
#define l2arc_writes_sent ARCSTAT(arcstat_l2_writes_sent)
#define l2arc_writes_done ARCSTAT(arcstat_l2_writes_done)
/*
* L2ARC Performance Tunables
*/
Add L2ARC tunables The performance of the L2ARC can be tweaked by a number of tunables, which may be necessary for different workloads: l2arc_write_max max write bytes per interval l2arc_write_boost extra write bytes during device warmup l2arc_noprefetch skip caching prefetched buffers l2arc_headroom number of max device writes to precache l2arc_feed_secs seconds between L2ARC writing l2arc_feed_min_ms min feed interval in milliseconds l2arc_feed_again turbo L2ARC warmup l2arc_norw no reads during writes Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #316
2011-07-08 19:41:57 +00:00
unsigned long l2arc_write_max = L2ARC_WRITE_SIZE; /* def max write size */
unsigned long l2arc_write_boost = L2ARC_WRITE_SIZE; /* extra warmup write */
unsigned long l2arc_headroom = L2ARC_HEADROOM; /* # of dev writes */
unsigned long l2arc_feed_secs = L2ARC_FEED_SECS; /* interval seconds */
unsigned long l2arc_feed_min_ms = L2ARC_FEED_MIN_MS; /* min interval msecs */
int l2arc_noprefetch = B_TRUE; /* don't cache prefetch bufs */
int l2arc_feed_again = B_TRUE; /* turbo warmup */
int l2arc_norw = B_TRUE; /* no reads during writes */
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* L2ARC Internals
*/
typedef struct l2arc_dev {
vdev_t *l2ad_vdev; /* vdev */
spa_t *l2ad_spa; /* spa */
uint64_t l2ad_hand; /* next write location */
uint64_t l2ad_write; /* desired write size, bytes */
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
uint64_t l2ad_boost; /* warmup write boost, bytes */
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
uint64_t l2ad_start; /* first addr on device */
uint64_t l2ad_end; /* last addr on device */
uint64_t l2ad_evict; /* last addr eviction reached */
boolean_t l2ad_first; /* first sweep through */
Rebase master to b108
2009-02-18 20:51:31 +00:00
boolean_t l2ad_writing; /* currently writing */
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
list_t *l2ad_buflist; /* buffer list */
list_node_t l2ad_node; /* device list node */
} l2arc_dev_t;
static list_t L2ARC_dev_list; /* device list */
static list_t *l2arc_dev_list; /* device list pointer */
static kmutex_t l2arc_dev_mtx; /* device list mutex */
static l2arc_dev_t *l2arc_dev_last; /* last device used */
static kmutex_t l2arc_buflist_mtx; /* mutex for all buflists */
static list_t L2ARC_free_on_write; /* free after write buf list */
static list_t *l2arc_free_on_write; /* free after write list ptr */
static kmutex_t l2arc_free_on_write_mtx; /* mutex for list */
static uint64_t l2arc_ndev; /* number of devices */
typedef struct l2arc_read_callback {
arc_buf_t *l2rcb_buf; /* read buffer */
spa_t *l2rcb_spa; /* spa */
blkptr_t l2rcb_bp; /* original blkptr */
zbookmark_t l2rcb_zb; /* original bookmark */
int l2rcb_flags; /* original flags */
} l2arc_read_callback_t;
typedef struct l2arc_write_callback {
l2arc_dev_t *l2wcb_dev; /* device info */
arc_buf_hdr_t *l2wcb_head; /* head of write buflist */
} l2arc_write_callback_t;
struct l2arc_buf_hdr {
/* protected by arc_buf_hdr mutex */
l2arc_dev_t *b_dev; /* L2ARC device */
Rebase master to b117
2009-07-02 22:44:48 +00:00
uint64_t b_daddr; /* disk address, offset byte */
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
};
typedef struct l2arc_data_free {
/* protected by l2arc_free_on_write_mtx */
void *l2df_data;
size_t l2df_size;
void (*l2df_func)(void *, size_t);
list_node_t l2df_list_node;
} l2arc_data_free_t;
static kmutex_t l2arc_feed_thr_lock;
static kcondvar_t l2arc_feed_thr_cv;
static uint8_t l2arc_thread_exit;
static void l2arc_read_done(zio_t *zio);
static void l2arc_hdr_stat_add(void);
static void l2arc_hdr_stat_remove(void);
static uint64_t
Rebase master to b108
2009-02-18 20:51:31 +00:00
buf_hash(uint64_t spa, const dva_t *dva, uint64_t birth)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
{
uint8_t *vdva = (uint8_t *)dva;
uint64_t crc = -1ULL;
int i;
ASSERT(zfs_crc64_table[128] == ZFS_CRC64_POLY);
for (i = 0; i < sizeof (dva_t); i++)
crc = (crc >> 8) ^ zfs_crc64_table[(crc ^ vdva[i]) & 0xFF];
Rebase master to b108
2009-02-18 20:51:31 +00:00
crc ^= (spa>>8) ^ birth;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
return (crc);
}
#define BUF_EMPTY(buf) \
((buf)->b_dva.dva_word[0] == 0 && \
(buf)->b_dva.dva_word[1] == 0 && \
(buf)->b_birth == 0)
#define BUF_EQUAL(spa, dva, birth, buf) \
((buf)->b_dva.dva_word[0] == (dva)->dva_word[0]) && \
((buf)->b_dva.dva_word[1] == (dva)->dva_word[1]) && \
((buf)->b_birth == birth) && ((buf)->b_spa == spa)
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
static void
buf_discard_identity(arc_buf_hdr_t *hdr)
{
hdr->b_dva.dva_word[0] = 0;
hdr->b_dva.dva_word[1] = 0;
hdr->b_birth = 0;
hdr->b_cksum0 = 0;
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
static arc_buf_hdr_t *
Rebase master to b108
2009-02-18 20:51:31 +00:00
buf_hash_find(uint64_t spa, const dva_t *dva, uint64_t birth, kmutex_t **lockp)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
{
uint64_t idx = BUF_HASH_INDEX(spa, dva, birth);
kmutex_t *hash_lock = BUF_HASH_LOCK(idx);
arc_buf_hdr_t *buf;
mutex_enter(hash_lock);
for (buf = buf_hash_table.ht_table[idx]; buf != NULL;
buf = buf->b_hash_next) {
if (BUF_EQUAL(spa, dva, birth, buf)) {
*lockp = hash_lock;
return (buf);
}
}
mutex_exit(hash_lock);
*lockp = NULL;
return (NULL);
}
/*
* Insert an entry into the hash table. If there is already an element
* equal to elem in the hash table, then the already existing element
* will be returned and the new element will not be inserted.
* Otherwise returns NULL.
*/
static arc_buf_hdr_t *
buf_hash_insert(arc_buf_hdr_t *buf, kmutex_t **lockp)
{
uint64_t idx = BUF_HASH_INDEX(buf->b_spa, &buf->b_dva, buf->b_birth);
kmutex_t *hash_lock = BUF_HASH_LOCK(idx);
arc_buf_hdr_t *fbuf;
uint32_t i;
ASSERT(!HDR_IN_HASH_TABLE(buf));
*lockp = hash_lock;
mutex_enter(hash_lock);
for (fbuf = buf_hash_table.ht_table[idx], i = 0; fbuf != NULL;
fbuf = fbuf->b_hash_next, i++) {
if (BUF_EQUAL(buf->b_spa, &buf->b_dva, buf->b_birth, fbuf))
return (fbuf);
}
buf->b_hash_next = buf_hash_table.ht_table[idx];
buf_hash_table.ht_table[idx] = buf;
buf->b_flags |= ARC_IN_HASH_TABLE;
/* collect some hash table performance data */
if (i > 0) {
ARCSTAT_BUMP(arcstat_hash_collisions);
if (i == 1)
ARCSTAT_BUMP(arcstat_hash_chains);
ARCSTAT_MAX(arcstat_hash_chain_max, i);
}
ARCSTAT_BUMP(arcstat_hash_elements);
ARCSTAT_MAXSTAT(arcstat_hash_elements);
return (NULL);
}
static void
buf_hash_remove(arc_buf_hdr_t *buf)
{
arc_buf_hdr_t *fbuf, **bufp;
uint64_t idx = BUF_HASH_INDEX(buf->b_spa, &buf->b_dva, buf->b_birth);
ASSERT(MUTEX_HELD(BUF_HASH_LOCK(idx)));
ASSERT(HDR_IN_HASH_TABLE(buf));
bufp = &buf_hash_table.ht_table[idx];
while ((fbuf = *bufp) != buf) {
ASSERT(fbuf != NULL);
bufp = &fbuf->b_hash_next;
}
*bufp = buf->b_hash_next;
buf->b_hash_next = NULL;
buf->b_flags &= ~ARC_IN_HASH_TABLE;
/* collect some hash table performance data */
ARCSTAT_BUMPDOWN(arcstat_hash_elements);
if (buf_hash_table.ht_table[idx] &&
buf_hash_table.ht_table[idx]->b_hash_next == NULL)
ARCSTAT_BUMPDOWN(arcstat_hash_chains);
}
/*
* Global data structures and functions for the buf kmem cache.
*/
static kmem_cache_t *hdr_cache;
static kmem_cache_t *buf_cache;
static void
buf_fini(void)
{
int i;
Add linux kernel memory support Required kmem/vmem changes Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:46:09 +00:00
#if defined(_KERNEL) && defined(HAVE_SPL)
/* Large allocations which do not require contiguous pages
* should be using vmem_free() in the linux kernel */
vmem_free(buf_hash_table.ht_table,
(buf_hash_table.ht_mask + 1) * sizeof (void *));
#else
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
kmem_free(buf_hash_table.ht_table,
(buf_hash_table.ht_mask + 1) * sizeof (void *));
Add linux kernel memory support Required kmem/vmem changes Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:46:09 +00:00
#endif
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
for (i = 0; i < BUF_LOCKS; i++)
mutex_destroy(&buf_hash_table.ht_locks[i].ht_lock);
kmem_cache_destroy(hdr_cache);
kmem_cache_destroy(buf_cache);
}
/*
* Constructor callback - called when the cache is empty
* and a new buf is requested.
*/
/* ARGSUSED */
static int
hdr_cons(void *vbuf, void *unused, int kmflag)
{
arc_buf_hdr_t *buf = vbuf;
bzero(buf, sizeof (arc_buf_hdr_t));
refcount_create(&buf->b_refcnt);
cv_init(&buf->b_cv, NULL, CV_DEFAULT, NULL);
mutex_init(&buf->b_freeze_lock, NULL, MUTEX_DEFAULT, NULL);
Fix list handling to only use the API Remove all instances of list handling where the API is not used and instead list data members are directly accessed. Doing this sort of thing is bad for portability. Additionally, ensure that list_link_init() is called on newly created list nodes. This ensures the node is properly initialized and does not rely on the assumption that zero'ing the list_node_t via kmem_zalloc() is the same as proper initialization. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 17:26:44 +00:00
list_link_init(&buf->b_arc_node);
list_link_init(&buf->b_l2node);
Rebase master to b108
2009-02-18 20:51:31 +00:00
arc_space_consume(sizeof (arc_buf_hdr_t), ARC_SPACE_HDRS);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
return (0);
}
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
/* ARGSUSED */
static int
buf_cons(void *vbuf, void *unused, int kmflag)
{
arc_buf_t *buf = vbuf;
bzero(buf, sizeof (arc_buf_t));
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
mutex_init(&buf->b_evict_lock, NULL, MUTEX_DEFAULT, NULL);
rw_init(&buf->b_data_lock, NULL, RW_DEFAULT, NULL);
Rebase master to b108
2009-02-18 20:51:31 +00:00
arc_space_consume(sizeof (arc_buf_t), ARC_SPACE_HDRS);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
return (0);
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* Destructor callback - called when a cached buf is
* no longer required.
*/
/* ARGSUSED */
static void
hdr_dest(void *vbuf, void *unused)
{
arc_buf_hdr_t *buf = vbuf;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
ASSERT(BUF_EMPTY(buf));
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
refcount_destroy(&buf->b_refcnt);
cv_destroy(&buf->b_cv);
mutex_destroy(&buf->b_freeze_lock);
Rebase master to b108
2009-02-18 20:51:31 +00:00
arc_space_return(sizeof (arc_buf_hdr_t), ARC_SPACE_HDRS);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
/* ARGSUSED */
static void
buf_dest(void *vbuf, void *unused)
{
arc_buf_t *buf = vbuf;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
mutex_destroy(&buf->b_evict_lock);
rw_destroy(&buf->b_data_lock);
Rebase master to b108
2009-02-18 20:51:31 +00:00
arc_space_return(sizeof (arc_buf_t), ARC_SPACE_HDRS);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
static void
buf_init(void)
{
uint64_t *ct;
uint64_t hsize = 1ULL << 12;
int i, j;
/*
* The hash table is big enough to fill all of physical memory
* with an average 64K block size. The table will take up
* totalmem*sizeof(void*)/64K (eg. 128KB/GB with 8-byte pointers).
*/
while (hsize * 65536 < physmem * PAGESIZE)
hsize <<= 1;
retry:
buf_hash_table.ht_mask = hsize - 1;
Add linux kernel memory support Required kmem/vmem changes Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:46:09 +00:00
#if defined(_KERNEL) && defined(HAVE_SPL)
/* Large allocations which do not require contiguous pages
* should be using vmem_alloc() in the linux kernel */
buf_hash_table.ht_table =
vmem_zalloc(hsize * sizeof (void*), KM_SLEEP);
#else
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
buf_hash_table.ht_table =
kmem_zalloc(hsize * sizeof (void*), KM_NOSLEEP);
Add linux kernel memory support Required kmem/vmem changes Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:46:09 +00:00
#endif
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
if (buf_hash_table.ht_table == NULL) {
ASSERT(hsize > (1ULL << 8));
hsize >>= 1;
goto retry;
}
hdr_cache = kmem_cache_create("arc_buf_hdr_t", sizeof (arc_buf_hdr_t),
Integrate ARC more tightly with Linux Under Solaris the ARC was designed to stay one step ahead of the VM subsystem. It would attempt to recognize low memory situtions before they occured and evict data from the cache. It would also make assessments about if there was enough free memory to perform a specific operation. This was all possible because Solaris exposes a fairly decent view of the memory state of the system to other kernel threads. Linux on the other hand does not make this information easily available. To avoid extensive modifications to the ARC the SPL attempts to provide these same interfaces. While this works it is not ideal and problems can arise when the ARC and Linux have different ideas about when your out of memory. This has manifested itself in the past as a spinning arc_reclaim_thread. This patch abandons the emulated Solaris interfaces in favor of the prefered Linux interface. That means moving the bulk of the memory reclaim logic out of the arc_reclaim_thread and in to the evict driven shrinker callback. The Linux VM will call this function when it needs memory. The ARC is then responsible for attempting to free the requested amount of memory if possible. Several interfaces have been modified to accomidate this approach, however the basic user space implementation remains the same. The following changes almost exclusively just apply to the kernel implementation. * Removed the hdr_recl() reclaim callback which is redundant with the broader arc_shrinker_func(). * Reduced arc_grow_retry to 5 seconds from 60. This is now used internally in the ARC with arc_no_grow to indicate that direct reclaim was recently performed. This typically indicates a rapid change in memory demands which the kswapd threads were unable to keep ahead of. As long as direct reclaim is happening once every 5 seconds arc growth will be paused to avoid further contributing to the existing memory pressure. The more common indirect reclaim paths will not set arc_no_grow. * arc_shrink() has been extended to take the number of bytes by which arc_c should be reduced. This allows for a more granual reduction of the arc target. Since the kernel provides a reclaim value to the arc_shrinker_func() this value is used instead of 1<<arc_shrink_shift. * arc_reclaim_needed() has been removed. It was used to determine if the system was under memory pressure and relied extensively on Solaris specific VM interfaces. In most case the new code just checks arc_no_grow which indicates that within the last arc_grow_retry seconds direct memory reclaim occurred. * arc_memory_throttle() has been updated to always include the amount of evictable memory (arc and page cache) in its free space calculations. This space is largely available in most call paths due to direct memory reclaim. * The Solaris pageout code was also removed to avoid confusion. It has always been disabled due to proc_pageout being defined as NULL in the Linux port. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-13 21:29:16 +00:00
0, hdr_cons, hdr_dest, NULL, NULL, NULL, 0);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
buf_cache = kmem_cache_create("arc_buf_t", sizeof (arc_buf_t),
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
0, buf_cons, buf_dest, NULL, NULL, NULL, 0);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
for (i = 0; i < 256; i++)
for (ct = zfs_crc64_table + i, *ct = i, j = 8; j > 0; j--)
*ct = (*ct >> 1) ^ (-(*ct & 1) & ZFS_CRC64_POLY);
for (i = 0; i < BUF_LOCKS; i++) {
mutex_init(&buf_hash_table.ht_locks[i].ht_lock,
NULL, MUTEX_DEFAULT, NULL);
}
}
#define ARC_MINTIME (hz>>4) /* 62 ms */
static void
arc_cksum_verify(arc_buf_t *buf)
{
zio_cksum_t zc;
if (!(zfs_flags & ZFS_DEBUG_MODIFY))
return;
mutex_enter(&buf->b_hdr->b_freeze_lock);
if (buf->b_hdr->b_freeze_cksum == NULL ||
(buf->b_hdr->b_flags & ARC_IO_ERROR)) {
mutex_exit(&buf->b_hdr->b_freeze_lock);
return;
}
fletcher_2_native(buf->b_data, buf->b_hdr->b_size, &zc);
if (!ZIO_CHECKSUM_EQUAL(*buf->b_hdr->b_freeze_cksum, zc))
panic("buffer modified while frozen!");
mutex_exit(&buf->b_hdr->b_freeze_lock);
}
static int
arc_cksum_equal(arc_buf_t *buf)
{
zio_cksum_t zc;
int equal;
mutex_enter(&buf->b_hdr->b_freeze_lock);
fletcher_2_native(buf->b_data, buf->b_hdr->b_size, &zc);
equal = ZIO_CHECKSUM_EQUAL(*buf->b_hdr->b_freeze_cksum, zc);
mutex_exit(&buf->b_hdr->b_freeze_lock);
return (equal);
}
static void
arc_cksum_compute(arc_buf_t *buf, boolean_t force)
{
if (!force && !(zfs_flags & ZFS_DEBUG_MODIFY))
return;
mutex_enter(&buf->b_hdr->b_freeze_lock);
if (buf->b_hdr->b_freeze_cksum != NULL) {
mutex_exit(&buf->b_hdr->b_freeze_lock);
return;
}
Use KM_PUSHPAGE in l2arc_write_buffers There is potential for deadlock in the l2arc_feed thread if KM_PUSHPAGE is not used for the allocations made in l2arc_write_buffers. Specifically, if KM_PUSHPAGE is not used for these allocations, it is possible for reclaim to be triggered which can cause the l2arc_feed thread to deadlock itself on the ARC_mru mutex. An example of this is demonstrated in the following backtrace of the l2arc_feed thread: crash> bt 4123 PID: 4123 TASK: ffff88062f8c1500 CPU: 6 COMMAND: "l2arc_feed" 0 [ffff88062511d610] schedule at ffffffff814eeee0 1 [ffff88062511d6d8] __mutex_lock_slowpath at ffffffff814f057e 2 [ffff88062511d748] mutex_lock at ffffffff814f041b 3 [ffff88062511d768] arc_evict at ffffffffa05130ca [zfs] 4 [ffff88062511d858] arc_adjust at ffffffffa05139a9 [zfs] 5 [ffff88062511d878] arc_shrink at ffffffffa0513a95 [zfs] 6 [ffff88062511d898] arc_kmem_reap_now at ffffffffa0513be8 [zfs] 7 [ffff88062511d8c8] arc_shrinker_func at ffffffffa0513ccc [zfs] 8 [ffff88062511d8f8] shrink_slab at ffffffff8112a17a 9 [ffff88062511d958] do_try_to_free_pages at ffffffff8112bfdf 10 [ffff88062511d9e8] try_to_free_pages at ffffffff8112c3ed 11 [ffff88062511da98] __alloc_pages_nodemask at ffffffff8112431d 12 [ffff88062511dbb8] kmem_getpages at ffffffff8115e632 13 [ffff88062511dbe8] fallback_alloc at ffffffff8115f24a 14 [ffff88062511dc68] ____cache_alloc_node at ffffffff8115efc9 15 [ffff88062511dcc8] __kmalloc at ffffffff8115fbf9 16 [ffff88062511dd18] kmem_alloc_debug at ffffffffa047b8cb [spl] 17 [ffff88062511dda8] l2arc_feed_thread at ffffffffa0511e71 [zfs] 18 [ffff88062511dea8] thread_generic_wrapper at ffffffffa047d1a1 [spl] 19 [ffff88062511dee8] kthread at ffffffff81090a86 20 [ffff88062511df48] kernel_thread at ffffffff8100c14a Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-04-10 17:55:17 +00:00
buf->b_hdr->b_freeze_cksum = kmem_alloc(sizeof (zio_cksum_t),
KM_PUSHPAGE);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
fletcher_2_native(buf->b_data, buf->b_hdr->b_size,
buf->b_hdr->b_freeze_cksum);
mutex_exit(&buf->b_hdr->b_freeze_lock);
}
void
arc_buf_thaw(arc_buf_t *buf)
{
if (zfs_flags & ZFS_DEBUG_MODIFY) {
if (buf->b_hdr->b_state != arc_anon)
panic("modifying non-anon buffer!");
if (buf->b_hdr->b_flags & ARC_IO_IN_PROGRESS)
panic("modifying buffer while i/o in progress!");
arc_cksum_verify(buf);
}
mutex_enter(&buf->b_hdr->b_freeze_lock);
if (buf->b_hdr->b_freeze_cksum != NULL) {
kmem_free(buf->b_hdr->b_freeze_cksum, sizeof (zio_cksum_t));
buf->b_hdr->b_freeze_cksum = NULL;
}
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (zfs_flags & ZFS_DEBUG_MODIFY) {
if (buf->b_hdr->b_thawed)
kmem_free(buf->b_hdr->b_thawed, 1);
buf->b_hdr->b_thawed = kmem_alloc(1, KM_SLEEP);
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
mutex_exit(&buf->b_hdr->b_freeze_lock);
}
void
arc_buf_freeze(arc_buf_t *buf)
{
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
kmutex_t *hash_lock;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
if (!(zfs_flags & ZFS_DEBUG_MODIFY))
return;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
hash_lock = HDR_LOCK(buf->b_hdr);
mutex_enter(hash_lock);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ASSERT(buf->b_hdr->b_freeze_cksum != NULL ||
buf->b_hdr->b_state == arc_anon);
arc_cksum_compute(buf, B_FALSE);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
mutex_exit(hash_lock);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
static void
add_reference(arc_buf_hdr_t *ab, kmutex_t *hash_lock, void *tag)
{
ASSERT(MUTEX_HELD(hash_lock));
if ((refcount_add(&ab->b_refcnt, tag) == 1) &&
(ab->b_state != arc_anon)) {
uint64_t delta = ab->b_size * ab->b_datacnt;
list_t *list = &ab->b_state->arcs_list[ab->b_type];
uint64_t *size = &ab->b_state->arcs_lsize[ab->b_type];
ASSERT(!MUTEX_HELD(&ab->b_state->arcs_mtx));
mutex_enter(&ab->b_state->arcs_mtx);
ASSERT(list_link_active(&ab->b_arc_node));
list_remove(list, ab);
if (GHOST_STATE(ab->b_state)) {
ASSERT3U(ab->b_datacnt, ==, 0);
ASSERT3P(ab->b_buf, ==, NULL);
delta = ab->b_size;
}
ASSERT(delta > 0);
ASSERT3U(*size, >=, delta);
atomic_add_64(size, -delta);
mutex_exit(&ab->b_state->arcs_mtx);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
/* remove the prefetch flag if we get a reference */
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
if (ab->b_flags & ARC_PREFETCH)
ab->b_flags &= ~ARC_PREFETCH;
}
}
static int
remove_reference(arc_buf_hdr_t *ab, kmutex_t *hash_lock, void *tag)
{
int cnt;
arc_state_t *state = ab->b_state;
ASSERT(state == arc_anon || MUTEX_HELD(hash_lock));
ASSERT(!GHOST_STATE(state));
if (((cnt = refcount_remove(&ab->b_refcnt, tag)) == 0) &&
(state != arc_anon)) {
uint64_t *size = &state->arcs_lsize[ab->b_type];
ASSERT(!MUTEX_HELD(&state->arcs_mtx));
mutex_enter(&state->arcs_mtx);
ASSERT(!list_link_active(&ab->b_arc_node));
list_insert_head(&state->arcs_list[ab->b_type], ab);
ASSERT(ab->b_datacnt > 0);
atomic_add_64(size, ab->b_size * ab->b_datacnt);
mutex_exit(&state->arcs_mtx);
}
return (cnt);
}
/*
* Move the supplied buffer to the indicated state. The mutex
* for the buffer must be held by the caller.
*/
static void
arc_change_state(arc_state_t *new_state, arc_buf_hdr_t *ab, kmutex_t *hash_lock)
{
arc_state_t *old_state = ab->b_state;
int64_t refcnt = refcount_count(&ab->b_refcnt);
uint64_t from_delta, to_delta;
ASSERT(MUTEX_HELD(hash_lock));
ASSERT(new_state != old_state);
ASSERT(refcnt == 0 || ab->b_datacnt > 0);
ASSERT(ab->b_datacnt == 0 || !GHOST_STATE(new_state));
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
ASSERT(ab->b_datacnt <= 1 || old_state != arc_anon);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
from_delta = to_delta = ab->b_datacnt * ab->b_size;
/*
* If this buffer is evictable, transfer it from the
* old state list to the new state list.
*/
if (refcnt == 0) {
if (old_state != arc_anon) {
int use_mutex = !MUTEX_HELD(&old_state->arcs_mtx);
uint64_t *size = &old_state->arcs_lsize[ab->b_type];
if (use_mutex)
mutex_enter(&old_state->arcs_mtx);
ASSERT(list_link_active(&ab->b_arc_node));
list_remove(&old_state->arcs_list[ab->b_type], ab);
/*
* If prefetching out of the ghost cache,
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
* we will have a non-zero datacnt.
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
*/
if (GHOST_STATE(old_state) && ab->b_datacnt == 0) {
/* ghost elements have a ghost size */
ASSERT(ab->b_buf == NULL);
from_delta = ab->b_size;
}
ASSERT3U(*size, >=, from_delta);
atomic_add_64(size, -from_delta);
if (use_mutex)
mutex_exit(&old_state->arcs_mtx);
}
if (new_state != arc_anon) {
int use_mutex = !MUTEX_HELD(&new_state->arcs_mtx);
uint64_t *size = &new_state->arcs_lsize[ab->b_type];
if (use_mutex)
mutex_enter(&new_state->arcs_mtx);
list_insert_head(&new_state->arcs_list[ab->b_type], ab);
/* ghost elements have a ghost size */
if (GHOST_STATE(new_state)) {
ASSERT(ab->b_datacnt == 0);
ASSERT(ab->b_buf == NULL);
to_delta = ab->b_size;
}
atomic_add_64(size, to_delta);
if (use_mutex)
mutex_exit(&new_state->arcs_mtx);
}
}
ASSERT(!BUF_EMPTY(ab));
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (new_state == arc_anon && HDR_IN_HASH_TABLE(ab))
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
buf_hash_remove(ab);
/* adjust state sizes */
if (to_delta)
atomic_add_64(&new_state->arcs_size, to_delta);
if (from_delta) {
ASSERT3U(old_state->arcs_size, >=, from_delta);
atomic_add_64(&old_state->arcs_size, -from_delta);
}
ab->b_state = new_state;
/* adjust l2arc hdr stats */
if (new_state == arc_l2c_only)
l2arc_hdr_stat_add();
else if (old_state == arc_l2c_only)
l2arc_hdr_stat_remove();
}
void
Rebase master to b108
2009-02-18 20:51:31 +00:00
arc_space_consume(uint64_t space, arc_space_type_t type)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
{
Rebase master to b108
2009-02-18 20:51:31 +00:00
ASSERT(type >= 0 && type < ARC_SPACE_NUMTYPES);
switch (type) {
Fix gcc missing case warnings Gcc ASSERT() missing cases are impossible Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 16:52:41 +00:00
default:
break;
Rebase master to b108
2009-02-18 20:51:31 +00:00
case ARC_SPACE_DATA:
ARCSTAT_INCR(arcstat_data_size, space);
break;
case ARC_SPACE_OTHER:
ARCSTAT_INCR(arcstat_other_size, space);
break;
case ARC_SPACE_HDRS:
ARCSTAT_INCR(arcstat_hdr_size, space);
break;
case ARC_SPACE_L2HDRS:
ARCSTAT_INCR(arcstat_l2_hdr_size, space);
break;
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
atomic_add_64(&arc_meta_used, space);
atomic_add_64(&arc_size, space);
}
void
Rebase master to b108
2009-02-18 20:51:31 +00:00
arc_space_return(uint64_t space, arc_space_type_t type)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
{
Rebase master to b108
2009-02-18 20:51:31 +00:00
ASSERT(type >= 0 && type < ARC_SPACE_NUMTYPES);
switch (type) {
Fix gcc missing case warnings Gcc ASSERT() missing cases are impossible Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 16:52:41 +00:00
default:
break;
Rebase master to b108
2009-02-18 20:51:31 +00:00
case ARC_SPACE_DATA:
ARCSTAT_INCR(arcstat_data_size, -space);
break;
case ARC_SPACE_OTHER:
ARCSTAT_INCR(arcstat_other_size, -space);
break;
case ARC_SPACE_HDRS:
ARCSTAT_INCR(arcstat_hdr_size, -space);
break;
case ARC_SPACE_L2HDRS:
ARCSTAT_INCR(arcstat_l2_hdr_size, -space);
break;
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ASSERT(arc_meta_used >= space);
if (arc_meta_max < arc_meta_used)
arc_meta_max = arc_meta_used;
atomic_add_64(&arc_meta_used, -space);
ASSERT(arc_size >= space);
atomic_add_64(&arc_size, -space);
}
void *
arc_data_buf_alloc(uint64_t size)
{
if (arc_evict_needed(ARC_BUFC_DATA))
cv_signal(&arc_reclaim_thr_cv);
atomic_add_64(&arc_size, size);
return (zio_data_buf_alloc(size));
}
void
arc_data_buf_free(void *buf, uint64_t size)
{
zio_data_buf_free(buf, size);
ASSERT(arc_size >= size);
atomic_add_64(&arc_size, -size);
}
arc_buf_t *
arc_buf_alloc(spa_t *spa, int size, void *tag, arc_buf_contents_t type)
{
arc_buf_hdr_t *hdr;
arc_buf_t *buf;
ASSERT3U(size, >, 0);
hdr = kmem_cache_alloc(hdr_cache, KM_PUSHPAGE);
ASSERT(BUF_EMPTY(hdr));
hdr->b_size = size;
hdr->b_type = type;
Illumos #1748: desire support for reguid in zfs Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com> Reviewed by: Alexander Eremin <alexander.eremin@nexenta.com> Reviewed by: Alexander Stetsenko <ams@nexenta.com> Approved by: Richard Lowe <richlowe@richlowe.net> References: https://www.illumos.org/issues/1748 This commit modifies the user to kernel space ioctl ABI. Extra care should be taken when updating to ensure both the kernel modules and utilities are updated. If only the user space component is updated both the 'zpool events' command and the 'zpool reguid' command will not work until the kernel modules are updated. Ported by: Martin Matuska <martin@matuska.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #665
2011-11-11 22:07:54 +00:00
hdr->b_spa = spa_load_guid(spa);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
hdr->b_state = arc_anon;
hdr->b_arc_access = 0;
buf = kmem_cache_alloc(buf_cache, KM_PUSHPAGE);
buf->b_hdr = hdr;
buf->b_data = NULL;
buf->b_efunc = NULL;
buf->b_private = NULL;
buf->b_next = NULL;
hdr->b_buf = buf;
arc_get_data_buf(buf);
hdr->b_datacnt = 1;
hdr->b_flags = 0;
ASSERT(refcount_is_zero(&hdr->b_refcnt));
(void) refcount_add(&hdr->b_refcnt, tag);
return (buf);
}
Rebase master to b117
2009-07-02 22:44:48 +00:00
static char *arc_onloan_tag = "onloan";
/*
* Loan out an anonymous arc buffer. Loaned buffers are not counted as in
* flight data by arc_tempreserve_space() until they are "returned". Loaned
* buffers must be returned to the arc before they can be used by the DMU or
* freed.
*/
arc_buf_t *
arc_loan_buf(spa_t *spa, int size)
{
arc_buf_t *buf;
buf = arc_buf_alloc(spa, size, arc_onloan_tag, ARC_BUFC_DATA);
atomic_add_64(&arc_loaned_bytes, size);
return (buf);
}
/*
* Return a loaned arc buffer to the arc.
*/
void
arc_return_buf(arc_buf_t *buf, void *tag)
{
arc_buf_hdr_t *hdr = buf->b_hdr;
ASSERT(buf->b_data != NULL);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
(void) refcount_add(&hdr->b_refcnt, tag);
(void) refcount_remove(&hdr->b_refcnt, arc_onloan_tag);
Rebase master to b117
2009-07-02 22:44:48 +00:00
atomic_add_64(&arc_loaned_bytes, -hdr->b_size);
}
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
/* Detach an arc_buf from a dbuf (tag) */
void
arc_loan_inuse_buf(arc_buf_t *buf, void *tag)
{
arc_buf_hdr_t *hdr;
ASSERT(buf->b_data != NULL);
hdr = buf->b_hdr;
(void) refcount_add(&hdr->b_refcnt, arc_onloan_tag);
(void) refcount_remove(&hdr->b_refcnt, tag);
buf->b_efunc = NULL;
buf->b_private = NULL;
atomic_add_64(&arc_loaned_bytes, hdr->b_size);
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
static arc_buf_t *
arc_buf_clone(arc_buf_t *from)
{
arc_buf_t *buf;
arc_buf_hdr_t *hdr = from->b_hdr;
uint64_t size = hdr->b_size;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
ASSERT(hdr->b_state != arc_anon);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
buf = kmem_cache_alloc(buf_cache, KM_PUSHPAGE);
buf->b_hdr = hdr;
buf->b_data = NULL;
buf->b_efunc = NULL;
buf->b_private = NULL;
buf->b_next = hdr->b_buf;
hdr->b_buf = buf;
arc_get_data_buf(buf);
bcopy(from->b_data, buf->b_data, size);
Illumos #3145, #3212 3145 single-copy arc 3212 ztest: race condition between vdev_online() and spa_vdev_remove() Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Eric Schrock <eric.schrock@delphix.com> Reviewed by: Justin T. Gibbs <gibbs@scsiguy.com> Approved by: Eric Schrock <eric.schrock@delphix.com> References: illumos-gate/commit/9253d63df408bb48584e0b1abfcc24ef2472382e illumos changeset: 13840:97fd5cdf328a https://www.illumos.org/issues/3145 https://www.illumos.org/issues/3212 Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #989 Closes #1137
2012-12-21 22:57:09 +00:00
/*
* This buffer already exists in the arc so create a duplicate
* copy for the caller. If the buffer is associated with user data
* then track the size and number of duplicates. These stats will be
* updated as duplicate buffers are created and destroyed.
*/
if (hdr->b_type == ARC_BUFC_DATA) {
ARCSTAT_BUMP(arcstat_duplicate_buffers);
ARCSTAT_INCR(arcstat_duplicate_buffers_size, size);
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
hdr->b_datacnt += 1;
return (buf);
}
void
arc_buf_add_ref(arc_buf_t *buf, void* tag)
{
arc_buf_hdr_t *hdr;
kmutex_t *hash_lock;
/*
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
* Check to see if this buffer is evicted. Callers
* must verify b_data != NULL to know if the add_ref
* was successful.
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
*/
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
mutex_enter(&buf->b_evict_lock);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
if (buf->b_data == NULL) {
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
mutex_exit(&buf->b_evict_lock);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
return;
}
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
hash_lock = HDR_LOCK(buf->b_hdr);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
mutex_enter(hash_lock);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
hdr = buf->b_hdr;
ASSERT3P(hash_lock, ==, HDR_LOCK(hdr));
mutex_exit(&buf->b_evict_lock);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ASSERT(hdr->b_state == arc_mru || hdr->b_state == arc_mfu);
add_reference(hdr, hash_lock, tag);
Rebase master to b108
2009-02-18 20:51:31 +00:00
DTRACE_PROBE1(arc__hit, arc_buf_hdr_t *, hdr);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
arc_access(hdr, hash_lock);
mutex_exit(hash_lock);
ARCSTAT_BUMP(arcstat_hits);
ARCSTAT_CONDSTAT(!(hdr->b_flags & ARC_PREFETCH),
demand, prefetch, hdr->b_type != ARC_BUFC_METADATA,
data, metadata, hits);
}
/*
* Free the arc data buffer. If it is an l2arc write in progress,
* the buffer is placed on l2arc_free_on_write to be freed later.
*/
static void
arc_buf_data_free(arc_buf_hdr_t *hdr, void (*free_func)(void *, size_t),
void *data, size_t size)
{
if (HDR_L2_WRITING(hdr)) {
l2arc_data_free_t *df;
Switch KM_SLEEP to KM_PUSHPAGE This warning indicates the incorrect use of KM_SLEEP in a call path which must use KM_PUSHPAGE to avoid deadlocking in direct reclaim. See commit b8d06fca089fae4680c3a552fc55c512bfb02202 for additional details. SPL: Fixing allocation for task txg_sync (6093) which used GFP flags 0x297bda7c with PF_NOFS set Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #917
2012-09-03 20:05:19 +00:00
df = kmem_alloc(sizeof (l2arc_data_free_t), KM_PUSHPAGE);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
df->l2df_data = data;
df->l2df_size = size;
df->l2df_func = free_func;
mutex_enter(&l2arc_free_on_write_mtx);
list_insert_head(l2arc_free_on_write, df);
mutex_exit(&l2arc_free_on_write_mtx);
ARCSTAT_BUMP(arcstat_l2_free_on_write);
} else {
free_func(data, size);
}
}
static void
arc_buf_destroy(arc_buf_t *buf, boolean_t recycle, boolean_t all)
{
arc_buf_t **bufp;
/* free up data associated with the buf */
if (buf->b_data) {
arc_state_t *state = buf->b_hdr->b_state;
uint64_t size = buf->b_hdr->b_size;
arc_buf_contents_t type = buf->b_hdr->b_type;
arc_cksum_verify(buf);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
if (!recycle) {
if (type == ARC_BUFC_METADATA) {
arc_buf_data_free(buf->b_hdr, zio_buf_free,
buf->b_data, size);
Rebase master to b108
2009-02-18 20:51:31 +00:00
arc_space_return(size, ARC_SPACE_DATA);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
} else {
ASSERT(type == ARC_BUFC_DATA);
arc_buf_data_free(buf->b_hdr,
zio_data_buf_free, buf->b_data, size);
Rebase master to b108
2009-02-18 20:51:31 +00:00
ARCSTAT_INCR(arcstat_data_size, -size);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
atomic_add_64(&arc_size, -size);
}
}
if (list_link_active(&buf->b_hdr->b_arc_node)) {
uint64_t *cnt = &state->arcs_lsize[type];
ASSERT(refcount_is_zero(&buf->b_hdr->b_refcnt));
ASSERT(state != arc_anon);
ASSERT3U(*cnt, >=, size);
atomic_add_64(cnt, -size);
}
ASSERT3U(state->arcs_size, >=, size);
atomic_add_64(&state->arcs_size, -size);
buf->b_data = NULL;
Illumos #3145, #3212 3145 single-copy arc 3212 ztest: race condition between vdev_online() and spa_vdev_remove() Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Eric Schrock <eric.schrock@delphix.com> Reviewed by: Justin T. Gibbs <gibbs@scsiguy.com> Approved by: Eric Schrock <eric.schrock@delphix.com> References: illumos-gate/commit/9253d63df408bb48584e0b1abfcc24ef2472382e illumos changeset: 13840:97fd5cdf328a https://www.illumos.org/issues/3145 https://www.illumos.org/issues/3212 Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #989 Closes #1137
2012-12-21 22:57:09 +00:00
/*
* If we're destroying a duplicate buffer make sure
* that the appropriate statistics are updated.
*/
if (buf->b_hdr->b_datacnt > 1 &&
buf->b_hdr->b_type == ARC_BUFC_DATA) {
ARCSTAT_BUMPDOWN(arcstat_duplicate_buffers);
ARCSTAT_INCR(arcstat_duplicate_buffers_size, -size);
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ASSERT(buf->b_hdr->b_datacnt > 0);
buf->b_hdr->b_datacnt -= 1;
}
/* only remove the buf if requested */
if (!all)
return;
/* remove the buf from the hdr list */
for (bufp = &buf->b_hdr->b_buf; *bufp != buf; bufp = &(*bufp)->b_next)
continue;
*bufp = buf->b_next;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
buf->b_next = NULL;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ASSERT(buf->b_efunc == NULL);
/* clean up the buf */
buf->b_hdr = NULL;
kmem_cache_free(buf_cache, buf);
}
static void
arc_hdr_destroy(arc_buf_hdr_t *hdr)
{
Fix gcc c90 compliance warnings Fix non-c90 compliant code, for the most part these changes simply deal with where a particular variable is declared. Under c90 it must alway be done at the very start of a block. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 16:52:39 +00:00
l2arc_buf_hdr_t *l2hdr = hdr->b_l2hdr;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ASSERT(refcount_is_zero(&hdr->b_refcnt));
ASSERT3P(hdr->b_state, ==, arc_anon);
ASSERT(!HDR_IO_IN_PROGRESS(hdr));
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (l2hdr != NULL) {
boolean_t buflist_held = MUTEX_HELD(&l2arc_buflist_mtx);
/*
* To prevent arc_free() and l2arc_evict() from
* attempting to free the same buffer at the same time,
* a FREE_IN_PROGRESS flag is given to arc_free() to
* give it priority. l2arc_evict() can't destroy this
* header while we are waiting on l2arc_buflist_mtx.
*
* The hdr may be removed from l2ad_buflist before we
* grab l2arc_buflist_mtx, so b_l2hdr is rechecked.
*/
if (!buflist_held) {
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
mutex_enter(&l2arc_buflist_mtx);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
l2hdr = hdr->b_l2hdr;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (l2hdr != NULL) {
list_remove(l2hdr->b_dev->l2ad_buflist, hdr);
ARCSTAT_INCR(arcstat_l2_size, -hdr->b_size);
kmem_free(l2hdr, sizeof (l2arc_buf_hdr_t));
if (hdr->b_state == arc_l2c_only)
l2arc_hdr_stat_remove();
hdr->b_l2hdr = NULL;
}
if (!buflist_held)
mutex_exit(&l2arc_buflist_mtx);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
if (!BUF_EMPTY(hdr)) {
ASSERT(!HDR_IN_HASH_TABLE(hdr));
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
buf_discard_identity(hdr);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
while (hdr->b_buf) {
arc_buf_t *buf = hdr->b_buf;
if (buf->b_efunc) {
mutex_enter(&arc_eviction_mtx);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
mutex_enter(&buf->b_evict_lock);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ASSERT(buf->b_hdr != NULL);
arc_buf_destroy(hdr->b_buf, FALSE, FALSE);
hdr->b_buf = buf->b_next;
buf->b_hdr = &arc_eviction_hdr;
buf->b_next = arc_eviction_list;
arc_eviction_list = buf;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
mutex_exit(&buf->b_evict_lock);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
mutex_exit(&arc_eviction_mtx);
} else {
arc_buf_destroy(hdr->b_buf, FALSE, TRUE);
}
}
if (hdr->b_freeze_cksum != NULL) {
kmem_free(hdr->b_freeze_cksum, sizeof (zio_cksum_t));
hdr->b_freeze_cksum = NULL;
}
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (hdr->b_thawed) {
kmem_free(hdr->b_thawed, 1);
hdr->b_thawed = NULL;
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ASSERT(!list_link_active(&hdr->b_arc_node));
ASSERT3P(hdr->b_hash_next, ==, NULL);
ASSERT3P(hdr->b_acb, ==, NULL);
kmem_cache_free(hdr_cache, hdr);
}
void
arc_buf_free(arc_buf_t *buf, void *tag)
{
arc_buf_hdr_t *hdr = buf->b_hdr;
int hashed = hdr->b_state != arc_anon;
ASSERT(buf->b_efunc == NULL);
ASSERT(buf->b_data != NULL);
if (hashed) {
kmutex_t *hash_lock = HDR_LOCK(hdr);
mutex_enter(hash_lock);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
hdr = buf->b_hdr;
ASSERT3P(hash_lock, ==, HDR_LOCK(hdr));
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
(void) remove_reference(hdr, hash_lock, tag);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (hdr->b_datacnt > 1) {
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
arc_buf_destroy(buf, FALSE, TRUE);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
} else {
ASSERT(buf == hdr->b_buf);
ASSERT(buf->b_efunc == NULL);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
hdr->b_flags |= ARC_BUF_AVAILABLE;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
mutex_exit(hash_lock);
} else if (HDR_IO_IN_PROGRESS(hdr)) {
int destroy_hdr;
/*
* We are in the middle of an async write. Don't destroy
* this buffer unless the write completes before we finish
* decrementing the reference count.
*/
mutex_enter(&arc_eviction_mtx);
(void) remove_reference(hdr, NULL, tag);
ASSERT(refcount_is_zero(&hdr->b_refcnt));
destroy_hdr = !HDR_IO_IN_PROGRESS(hdr);
mutex_exit(&arc_eviction_mtx);
if (destroy_hdr)
arc_hdr_destroy(hdr);
} else {
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (remove_reference(hdr, NULL, tag) > 0)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
arc_buf_destroy(buf, FALSE, TRUE);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
else
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
arc_hdr_destroy(hdr);
}
}
int
arc_buf_remove_ref(arc_buf_t *buf, void* tag)
{
arc_buf_hdr_t *hdr = buf->b_hdr;
kmutex_t *hash_lock = HDR_LOCK(hdr);
int no_callback = (buf->b_efunc == NULL);
if (hdr->b_state == arc_anon) {
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
ASSERT(hdr->b_datacnt == 1);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
arc_buf_free(buf, tag);
return (no_callback);
}
mutex_enter(hash_lock);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
hdr = buf->b_hdr;
ASSERT3P(hash_lock, ==, HDR_LOCK(hdr));
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ASSERT(hdr->b_state != arc_anon);
ASSERT(buf->b_data != NULL);
(void) remove_reference(hdr, hash_lock, tag);
if (hdr->b_datacnt > 1) {
if (no_callback)
arc_buf_destroy(buf, FALSE, TRUE);
} else if (no_callback) {
ASSERT(hdr->b_buf == buf && buf->b_next == NULL);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
ASSERT(buf->b_efunc == NULL);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
hdr->b_flags |= ARC_BUF_AVAILABLE;
}
ASSERT(no_callback || hdr->b_datacnt > 1 ||
refcount_is_zero(&hdr->b_refcnt));
mutex_exit(hash_lock);
return (no_callback);
}
int
arc_buf_size(arc_buf_t *buf)
{
return (buf->b_hdr->b_size);
}
Illumos #3145, #3212 3145 single-copy arc 3212 ztest: race condition between vdev_online() and spa_vdev_remove() Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Eric Schrock <eric.schrock@delphix.com> Reviewed by: Justin T. Gibbs <gibbs@scsiguy.com> Approved by: Eric Schrock <eric.schrock@delphix.com> References: illumos-gate/commit/9253d63df408bb48584e0b1abfcc24ef2472382e illumos changeset: 13840:97fd5cdf328a https://www.illumos.org/issues/3145 https://www.illumos.org/issues/3212 Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #989 Closes #1137
2012-12-21 22:57:09 +00:00
/*
* Called from the DMU to determine if the current buffer should be
* evicted. In order to ensure proper locking, the eviction must be initiated
* from the DMU. Return true if the buffer is associated with user data and
* duplicate buffers still exist.
*/
boolean_t
arc_buf_eviction_needed(arc_buf_t *buf)
{
arc_buf_hdr_t *hdr;
boolean_t evict_needed = B_FALSE;
if (zfs_disable_dup_eviction)
return (B_FALSE);
mutex_enter(&buf->b_evict_lock);
hdr = buf->b_hdr;
if (hdr == NULL) {
/*
* We are in arc_do_user_evicts(); let that function
* perform the eviction.
*/
ASSERT(buf->b_data == NULL);
mutex_exit(&buf->b_evict_lock);
return (B_FALSE);
} else if (buf->b_data == NULL) {
/*
* We have already been added to the arc eviction list;
* recommend eviction.
*/
ASSERT3P(hdr, ==, &arc_eviction_hdr);
mutex_exit(&buf->b_evict_lock);
return (B_TRUE);
}
if (hdr->b_datacnt > 1 && hdr->b_type == ARC_BUFC_DATA)
evict_needed = B_TRUE;
mutex_exit(&buf->b_evict_lock);
return (evict_needed);
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* Evict buffers from list until we've removed the specified number of
* bytes. Move the removed buffers to the appropriate evict state.
* If the recycle flag is set, then attempt to "recycle" a buffer:
* - look for a buffer to evict that is `bytes' long.
* - return the data block from this buffer rather than freeing it.
* This flag is used by callers that are trying to make space for a
* new buffer in a full arc cache.
*
* This function makes a "best effort". It skips over any buffers
* it can't get a hash_lock on, and so may not catch all candidates.
* It may also return without evicting as much space as requested.
*/
static void *
Rebase master to b108
2009-02-18 20:51:31 +00:00
arc_evict(arc_state_t *state, uint64_t spa, int64_t bytes, boolean_t recycle,
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
arc_buf_contents_t type)
{
arc_state_t *evicted_state;
uint64_t bytes_evicted = 0, skipped = 0, missed = 0;
arc_buf_hdr_t *ab, *ab_prev = NULL;
list_t *list = &state->arcs_list[type];
kmutex_t *hash_lock;
boolean_t have_lock;
void *stolen = NULL;
ASSERT(state == arc_mru || state == arc_mfu);
evicted_state = (state == arc_mru) ? arc_mru_ghost : arc_mfu_ghost;
mutex_enter(&state->arcs_mtx);
mutex_enter(&evicted_state->arcs_mtx);
for (ab = list_tail(list); ab; ab = ab_prev) {
ab_prev = list_prev(list, ab);
/* prefetch buffers have a minimum lifespan */
if (HDR_IO_IN_PROGRESS(ab) ||
(spa && ab->b_spa != spa) ||
(ab->b_flags & (ARC_PREFETCH|ARC_INDIRECT) &&
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
ddi_get_lbolt() - ab->b_arc_access <
arc_min_prefetch_lifespan)) {
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
skipped++;
continue;
}
/* "lookahead" for better eviction candidate */
if (recycle && ab->b_size != bytes &&
ab_prev && ab_prev->b_size == bytes)
continue;
hash_lock = HDR_LOCK(ab);
have_lock = MUTEX_HELD(hash_lock);
if (have_lock || mutex_tryenter(hash_lock)) {
ASSERT3U(refcount_count(&ab->b_refcnt), ==, 0);
ASSERT(ab->b_datacnt > 0);
while (ab->b_buf) {
arc_buf_t *buf = ab->b_buf;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (!mutex_tryenter(&buf->b_evict_lock)) {
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
missed += 1;
break;
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
if (buf->b_data) {
bytes_evicted += ab->b_size;
if (recycle && ab->b_type == type &&
ab->b_size == bytes &&
!HDR_L2_WRITING(ab)) {
stolen = buf->b_data;
recycle = FALSE;
}
}
if (buf->b_efunc) {
mutex_enter(&arc_eviction_mtx);
arc_buf_destroy(buf,
buf->b_data == stolen, FALSE);
ab->b_buf = buf->b_next;
buf->b_hdr = &arc_eviction_hdr;
buf->b_next = arc_eviction_list;
arc_eviction_list = buf;
mutex_exit(&arc_eviction_mtx);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
mutex_exit(&buf->b_evict_lock);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
} else {
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
mutex_exit(&buf->b_evict_lock);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
arc_buf_destroy(buf,
buf->b_data == stolen, TRUE);
}
}
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (ab->b_l2hdr) {
ARCSTAT_INCR(arcstat_evict_l2_cached,
ab->b_size);
} else {
if (l2arc_write_eligible(ab->b_spa, ab)) {
ARCSTAT_INCR(arcstat_evict_l2_eligible,
ab->b_size);
} else {
ARCSTAT_INCR(
arcstat_evict_l2_ineligible,
ab->b_size);
}
}
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
if (ab->b_datacnt == 0) {
arc_change_state(evicted_state, ab, hash_lock);
ASSERT(HDR_IN_HASH_TABLE(ab));
ab->b_flags |= ARC_IN_HASH_TABLE;
ab->b_flags &= ~ARC_BUF_AVAILABLE;
DTRACE_PROBE1(arc__evict, arc_buf_hdr_t *, ab);
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
if (!have_lock)
mutex_exit(hash_lock);
if (bytes >= 0 && bytes_evicted >= bytes)
break;
} else {
missed += 1;
}
}
mutex_exit(&evicted_state->arcs_mtx);
mutex_exit(&state->arcs_mtx);
if (bytes_evicted < bytes)
Fix missing newlines Add missing \n's to dprintf()s Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 17:28:31 +00:00
dprintf("only evicted %lld bytes from %x\n",
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
(longlong_t)bytes_evicted, state);
if (skipped)
ARCSTAT_INCR(arcstat_evict_skip, skipped);
if (missed)
ARCSTAT_INCR(arcstat_mutex_miss, missed);
/*
* We have just evicted some date into the ghost state, make
* sure we also adjust the ghost state size if necessary.
*/
if (arc_no_grow &&
arc_mru_ghost->arcs_size + arc_mfu_ghost->arcs_size > arc_c) {
int64_t mru_over = arc_anon->arcs_size + arc_mru->arcs_size +
arc_mru_ghost->arcs_size - arc_c;
if (mru_over > 0 && arc_mru_ghost->arcs_lsize[type] > 0) {
int64_t todelete =
MIN(arc_mru_ghost->arcs_lsize[type], mru_over);
Fix gcc cast warnings Gcc -Wall warn: 'lacks a cast' Gcc -Wall warn: 'comparison between pointer and integer' Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 16:52:39 +00:00
arc_evict_ghost(arc_mru_ghost, 0, todelete);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
} else if (arc_mfu_ghost->arcs_lsize[type] > 0) {
int64_t todelete = MIN(arc_mfu_ghost->arcs_lsize[type],
arc_mru_ghost->arcs_size +
arc_mfu_ghost->arcs_size - arc_c);
Fix gcc cast warnings Gcc -Wall warn: 'lacks a cast' Gcc -Wall warn: 'comparison between pointer and integer' Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 16:52:39 +00:00
arc_evict_ghost(arc_mfu_ghost, 0, todelete);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
}
return (stolen);
}
/*
* Remove buffers from list until we've removed the specified number of
* bytes. Destroy the buffers that are removed.
*/
static void
Rebase master to b108
2009-02-18 20:51:31 +00:00
arc_evict_ghost(arc_state_t *state, uint64_t spa, int64_t bytes)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
{
arc_buf_hdr_t *ab, *ab_prev;
Fix gcc missing braces warnings Resolve compiler warnings concerning missing braces. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 16:52:41 +00:00
arc_buf_hdr_t marker;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
list_t *list = &state->arcs_list[ARC_BUFC_DATA];
kmutex_t *hash_lock;
uint64_t bytes_deleted = 0;
uint64_t bufs_skipped = 0;
ASSERT(GHOST_STATE(state));
Fix gcc missing braces warnings Resolve compiler warnings concerning missing braces. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 16:52:41 +00:00
bzero(&marker, sizeof(marker));
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
top:
mutex_enter(&state->arcs_mtx);
for (ab = list_tail(list); ab; ab = ab_prev) {
ab_prev = list_prev(list, ab);
if (spa && ab->b_spa != spa)
continue;
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
/* ignore markers */
if (ab->b_spa == 0)
continue;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
hash_lock = HDR_LOCK(ab);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
/* caller may be trying to modify this buffer, skip it */
if (MUTEX_HELD(hash_lock))
continue;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
if (mutex_tryenter(hash_lock)) {
ASSERT(!HDR_IO_IN_PROGRESS(ab));
ASSERT(ab->b_buf == NULL);
ARCSTAT_BUMP(arcstat_deleted);
bytes_deleted += ab->b_size;
if (ab->b_l2hdr != NULL) {
/*
* This buffer is cached on the 2nd Level ARC;
* don't destroy the header.
*/
arc_change_state(arc_l2c_only, ab, hash_lock);
mutex_exit(hash_lock);
} else {
arc_change_state(arc_anon, ab, hash_lock);
mutex_exit(hash_lock);
arc_hdr_destroy(ab);
}
DTRACE_PROBE1(arc__delete, arc_buf_hdr_t *, ab);
if (bytes >= 0 && bytes_deleted >= bytes)
break;
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
} else if (bytes < 0) {
/*
* Insert a list marker and then wait for the
* hash lock to become available. Once its
* available, restart from where we left off.
*/
list_insert_after(list, ab, &marker);
mutex_exit(&state->arcs_mtx);
mutex_enter(hash_lock);
mutex_exit(hash_lock);
mutex_enter(&state->arcs_mtx);
ab_prev = list_prev(list, &marker);
list_remove(list, &marker);
} else
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
bufs_skipped += 1;
}
mutex_exit(&state->arcs_mtx);
if (list == &state->arcs_list[ARC_BUFC_DATA] &&
(bytes < 0 || bytes_deleted < bytes)) {
list = &state->arcs_list[ARC_BUFC_METADATA];
goto top;
}
if (bufs_skipped) {
ARCSTAT_INCR(arcstat_mutex_miss, bufs_skipped);
ASSERT(bytes >= 0);
}
if (bytes_deleted < bytes)
Fix missing newlines Add missing \n's to dprintf()s Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 17:28:31 +00:00
dprintf("only deleted %lld bytes from %p\n",
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
(longlong_t)bytes_deleted, state);
}
static void
arc_adjust(void)
{
Rebase master to b108
2009-02-18 20:51:31 +00:00
int64_t adjustment, delta;
/*
* Adjust MRU size
*/
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
adjustment = MIN((int64_t)(arc_size - arc_c),
(int64_t)(arc_anon->arcs_size + arc_mru->arcs_size + arc_meta_used -
arc_p));
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Rebase master to b108
2009-02-18 20:51:31 +00:00
if (adjustment > 0 && arc_mru->arcs_lsize[ARC_BUFC_DATA] > 0) {
delta = MIN(arc_mru->arcs_lsize[ARC_BUFC_DATA], adjustment);
Fix gcc cast warnings Gcc -Wall warn: 'lacks a cast' Gcc -Wall warn: 'comparison between pointer and integer' Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 16:52:39 +00:00
(void) arc_evict(arc_mru, 0, delta, FALSE, ARC_BUFC_DATA);
Rebase master to b108
2009-02-18 20:51:31 +00:00
adjustment -= delta;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
Rebase master to b108
2009-02-18 20:51:31 +00:00
if (adjustment > 0 && arc_mru->arcs_lsize[ARC_BUFC_METADATA] > 0) {
delta = MIN(arc_mru->arcs_lsize[ARC_BUFC_METADATA], adjustment);
Fix gcc cast warnings Gcc -Wall warn: 'lacks a cast' Gcc -Wall warn: 'comparison between pointer and integer' Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 16:52:39 +00:00
(void) arc_evict(arc_mru, 0, delta, FALSE,
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ARC_BUFC_METADATA);
}
Rebase master to b108
2009-02-18 20:51:31 +00:00
/*
* Adjust MFU size
*/
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Rebase master to b108
2009-02-18 20:51:31 +00:00
adjustment = arc_size - arc_c;
if (adjustment > 0 && arc_mfu->arcs_lsize[ARC_BUFC_DATA] > 0) {
delta = MIN(adjustment, arc_mfu->arcs_lsize[ARC_BUFC_DATA]);
Fix gcc cast warnings Gcc -Wall warn: 'lacks a cast' Gcc -Wall warn: 'comparison between pointer and integer' Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 16:52:39 +00:00
(void) arc_evict(arc_mfu, 0, delta, FALSE, ARC_BUFC_DATA);
Rebase master to b108
2009-02-18 20:51:31 +00:00
adjustment -= delta;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
Rebase master to b108
2009-02-18 20:51:31 +00:00
if (adjustment > 0 && arc_mfu->arcs_lsize[ARC_BUFC_METADATA] > 0) {
int64_t delta = MIN(adjustment,
arc_mfu->arcs_lsize[ARC_BUFC_METADATA]);
Fix gcc cast warnings Gcc -Wall warn: 'lacks a cast' Gcc -Wall warn: 'comparison between pointer and integer' Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 16:52:39 +00:00
(void) arc_evict(arc_mfu, 0, delta, FALSE,
Rebase master to b108
2009-02-18 20:51:31 +00:00
ARC_BUFC_METADATA);
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Rebase master to b108
2009-02-18 20:51:31 +00:00
/*
* Adjust ghost lists
*/
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Rebase master to b108
2009-02-18 20:51:31 +00:00
adjustment = arc_mru->arcs_size + arc_mru_ghost->arcs_size - arc_c;
if (adjustment > 0 && arc_mru_ghost->arcs_size > 0) {
delta = MIN(arc_mru_ghost->arcs_size, adjustment);
Fix gcc cast warnings Gcc -Wall warn: 'lacks a cast' Gcc -Wall warn: 'comparison between pointer and integer' Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 16:52:39 +00:00
arc_evict_ghost(arc_mru_ghost, 0, delta);
Rebase master to b108
2009-02-18 20:51:31 +00:00
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Rebase master to b108
2009-02-18 20:51:31 +00:00
adjustment =
arc_mru_ghost->arcs_size + arc_mfu_ghost->arcs_size - arc_c;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Rebase master to b108
2009-02-18 20:51:31 +00:00
if (adjustment > 0 && arc_mfu_ghost->arcs_size > 0) {
delta = MIN(arc_mfu_ghost->arcs_size, adjustment);
Fix gcc cast warnings Gcc -Wall warn: 'lacks a cast' Gcc -Wall warn: 'comparison between pointer and integer' Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 16:52:39 +00:00
arc_evict_ghost(arc_mfu_ghost, 0, delta);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
}
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
/*
* Request that arc user drop references so that N bytes can be released
* from the cache. This provides a mechanism to ensure the arc can honor
* the arc_meta_limit and reclaim buffers which are pinned in the cache
* by higher layers. (i.e. the zpl)
*/
static void
arc_do_user_prune(int64_t adjustment)
{
arc_prune_func_t *func;
void *private;
arc_prune_t *cp, *np;
mutex_enter(&arc_prune_mtx);
cp = list_head(&arc_prune_list);
while (cp != NULL) {
func = cp->p_pfunc;
private = cp->p_private;
np = list_next(&arc_prune_list, cp);
refcount_add(&cp->p_refcnt, func);
mutex_exit(&arc_prune_mtx);
if (func != NULL)
func(adjustment, private);
mutex_enter(&arc_prune_mtx);
/* User removed prune callback concurrently with execution */
if (refcount_remove(&cp->p_refcnt, func) == 0) {
ASSERT(!list_link_active(&cp->p_node));
refcount_destroy(&cp->p_refcnt);
kmem_free(cp, sizeof (*cp));
}
cp = np;
}
ARCSTAT_BUMP(arcstat_prune);
mutex_exit(&arc_prune_mtx);
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
static void
arc_do_user_evicts(void)
{
mutex_enter(&arc_eviction_mtx);
while (arc_eviction_list != NULL) {
arc_buf_t *buf = arc_eviction_list;
arc_eviction_list = buf->b_next;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
mutex_enter(&buf->b_evict_lock);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
buf->b_hdr = NULL;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
mutex_exit(&buf->b_evict_lock);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
mutex_exit(&arc_eviction_mtx);
if (buf->b_efunc != NULL)
VERIFY(buf->b_efunc(buf) == 0);
buf->b_efunc = NULL;
buf->b_private = NULL;
kmem_cache_free(buf_cache, buf);
mutex_enter(&arc_eviction_mtx);
}
mutex_exit(&arc_eviction_mtx);
}
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
/*
* Evict only meta data objects from the cache leaving the data objects.
* This is only used to enforce the tunable arc_meta_limit, if we are
* unable to evict enough buffers notify the user via the prune callback.
*/
void
arc_adjust_meta(int64_t adjustment, boolean_t may_prune)
{
int64_t delta;
if (adjustment > 0 && arc_mru->arcs_lsize[ARC_BUFC_METADATA] > 0) {
delta = MIN(arc_mru->arcs_lsize[ARC_BUFC_METADATA], adjustment);
arc_evict(arc_mru, 0, delta, FALSE, ARC_BUFC_METADATA);
adjustment -= delta;
}
if (adjustment > 0 && arc_mfu->arcs_lsize[ARC_BUFC_METADATA] > 0) {
delta = MIN(arc_mfu->arcs_lsize[ARC_BUFC_METADATA], adjustment);
arc_evict(arc_mfu, 0, delta, FALSE, ARC_BUFC_METADATA);
adjustment -= delta;
}
if (may_prune && (adjustment > 0) && (arc_meta_used > arc_meta_limit))
arc_do_user_prune(arc_meta_prune);
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* Flush all *evictable* data from the cache for the given spa.
* NOTE: this will not touch "active" (i.e. referenced) data.
*/
void
arc_flush(spa_t *spa)
{
Rebase master to b108
2009-02-18 20:51:31 +00:00
uint64_t guid = 0;
if (spa)
Illumos #1748: desire support for reguid in zfs Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com> Reviewed by: Alexander Eremin <alexander.eremin@nexenta.com> Reviewed by: Alexander Stetsenko <ams@nexenta.com> Approved by: Richard Lowe <richlowe@richlowe.net> References: https://www.illumos.org/issues/1748 This commit modifies the user to kernel space ioctl ABI. Extra care should be taken when updating to ensure both the kernel modules and utilities are updated. If only the user space component is updated both the 'zpool events' command and the 'zpool reguid' command will not work until the kernel modules are updated. Ported by: Martin Matuska <martin@matuska.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #665
2011-11-11 22:07:54 +00:00
guid = spa_load_guid(spa);
Rebase master to b108
2009-02-18 20:51:31 +00:00
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
while (list_head(&arc_mru->arcs_list[ARC_BUFC_DATA])) {
Rebase master to b108
2009-02-18 20:51:31 +00:00
(void) arc_evict(arc_mru, guid, -1, FALSE, ARC_BUFC_DATA);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
if (spa)
break;
}
while (list_head(&arc_mru->arcs_list[ARC_BUFC_METADATA])) {
Rebase master to b108
2009-02-18 20:51:31 +00:00
(void) arc_evict(arc_mru, guid, -1, FALSE, ARC_BUFC_METADATA);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
if (spa)
break;
}
while (list_head(&arc_mfu->arcs_list[ARC_BUFC_DATA])) {
Rebase master to b108
2009-02-18 20:51:31 +00:00
(void) arc_evict(arc_mfu, guid, -1, FALSE, ARC_BUFC_DATA);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
if (spa)
break;
}
while (list_head(&arc_mfu->arcs_list[ARC_BUFC_METADATA])) {
Rebase master to b108
2009-02-18 20:51:31 +00:00
(void) arc_evict(arc_mfu, guid, -1, FALSE, ARC_BUFC_METADATA);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
if (spa)
break;
}
Rebase master to b108
2009-02-18 20:51:31 +00:00
arc_evict_ghost(arc_mru_ghost, guid, -1);
arc_evict_ghost(arc_mfu_ghost, guid, -1);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
mutex_enter(&arc_reclaim_thr_lock);
arc_do_user_evicts();
mutex_exit(&arc_reclaim_thr_lock);
ASSERT(spa || arc_eviction_list == NULL);
}
void
Integrate ARC more tightly with Linux Under Solaris the ARC was designed to stay one step ahead of the VM subsystem. It would attempt to recognize low memory situtions before they occured and evict data from the cache. It would also make assessments about if there was enough free memory to perform a specific operation. This was all possible because Solaris exposes a fairly decent view of the memory state of the system to other kernel threads. Linux on the other hand does not make this information easily available. To avoid extensive modifications to the ARC the SPL attempts to provide these same interfaces. While this works it is not ideal and problems can arise when the ARC and Linux have different ideas about when your out of memory. This has manifested itself in the past as a spinning arc_reclaim_thread. This patch abandons the emulated Solaris interfaces in favor of the prefered Linux interface. That means moving the bulk of the memory reclaim logic out of the arc_reclaim_thread and in to the evict driven shrinker callback. The Linux VM will call this function when it needs memory. The ARC is then responsible for attempting to free the requested amount of memory if possible. Several interfaces have been modified to accomidate this approach, however the basic user space implementation remains the same. The following changes almost exclusively just apply to the kernel implementation. * Removed the hdr_recl() reclaim callback which is redundant with the broader arc_shrinker_func(). * Reduced arc_grow_retry to 5 seconds from 60. This is now used internally in the ARC with arc_no_grow to indicate that direct reclaim was recently performed. This typically indicates a rapid change in memory demands which the kswapd threads were unable to keep ahead of. As long as direct reclaim is happening once every 5 seconds arc growth will be paused to avoid further contributing to the existing memory pressure. The more common indirect reclaim paths will not set arc_no_grow. * arc_shrink() has been extended to take the number of bytes by which arc_c should be reduced. This allows for a more granual reduction of the arc target. Since the kernel provides a reclaim value to the arc_shrinker_func() this value is used instead of 1<<arc_shrink_shift. * arc_reclaim_needed() has been removed. It was used to determine if the system was under memory pressure and relied extensively on Solaris specific VM interfaces. In most case the new code just checks arc_no_grow which indicates that within the last arc_grow_retry seconds direct memory reclaim occurred. * arc_memory_throttle() has been updated to always include the amount of evictable memory (arc and page cache) in its free space calculations. This space is largely available in most call paths due to direct memory reclaim. * The Solaris pageout code was also removed to avoid confusion. It has always been disabled due to proc_pageout being defined as NULL in the Linux port. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-13 21:29:16 +00:00
arc_shrink(uint64_t bytes)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
{
if (arc_c > arc_c_min) {
uint64_t to_free;
Integrate ARC more tightly with Linux Under Solaris the ARC was designed to stay one step ahead of the VM subsystem. It would attempt to recognize low memory situtions before they occured and evict data from the cache. It would also make assessments about if there was enough free memory to perform a specific operation. This was all possible because Solaris exposes a fairly decent view of the memory state of the system to other kernel threads. Linux on the other hand does not make this information easily available. To avoid extensive modifications to the ARC the SPL attempts to provide these same interfaces. While this works it is not ideal and problems can arise when the ARC and Linux have different ideas about when your out of memory. This has manifested itself in the past as a spinning arc_reclaim_thread. This patch abandons the emulated Solaris interfaces in favor of the prefered Linux interface. That means moving the bulk of the memory reclaim logic out of the arc_reclaim_thread and in to the evict driven shrinker callback. The Linux VM will call this function when it needs memory. The ARC is then responsible for attempting to free the requested amount of memory if possible. Several interfaces have been modified to accomidate this approach, however the basic user space implementation remains the same. The following changes almost exclusively just apply to the kernel implementation. * Removed the hdr_recl() reclaim callback which is redundant with the broader arc_shrinker_func(). * Reduced arc_grow_retry to 5 seconds from 60. This is now used internally in the ARC with arc_no_grow to indicate that direct reclaim was recently performed. This typically indicates a rapid change in memory demands which the kswapd threads were unable to keep ahead of. As long as direct reclaim is happening once every 5 seconds arc growth will be paused to avoid further contributing to the existing memory pressure. The more common indirect reclaim paths will not set arc_no_grow. * arc_shrink() has been extended to take the number of bytes by which arc_c should be reduced. This allows for a more granual reduction of the arc target. Since the kernel provides a reclaim value to the arc_shrinker_func() this value is used instead of 1<<arc_shrink_shift. * arc_reclaim_needed() has been removed. It was used to determine if the system was under memory pressure and relied extensively on Solaris specific VM interfaces. In most case the new code just checks arc_no_grow which indicates that within the last arc_grow_retry seconds direct memory reclaim occurred. * arc_memory_throttle() has been updated to always include the amount of evictable memory (arc and page cache) in its free space calculations. This space is largely available in most call paths due to direct memory reclaim. * The Solaris pageout code was also removed to avoid confusion. It has always been disabled due to proc_pageout being defined as NULL in the Linux port. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-13 21:29:16 +00:00
to_free = bytes ? bytes : arc_c >> arc_shrink_shift;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
if (arc_c > arc_c_min + to_free)
atomic_add_64(&arc_c, -to_free);
else
arc_c = arc_c_min;
atomic_add_64(&arc_p, -(arc_p >> arc_shrink_shift));
if (arc_c > arc_size)
arc_c = MAX(arc_size, arc_c_min);
if (arc_p > arc_c)
arc_p = (arc_c >> 1);
ASSERT(arc_c >= arc_c_min);
ASSERT((int64_t)arc_p >= 0);
}
if (arc_size > arc_c)
arc_adjust();
}
static void
Integrate ARC more tightly with Linux Under Solaris the ARC was designed to stay one step ahead of the VM subsystem. It would attempt to recognize low memory situtions before they occured and evict data from the cache. It would also make assessments about if there was enough free memory to perform a specific operation. This was all possible because Solaris exposes a fairly decent view of the memory state of the system to other kernel threads. Linux on the other hand does not make this information easily available. To avoid extensive modifications to the ARC the SPL attempts to provide these same interfaces. While this works it is not ideal and problems can arise when the ARC and Linux have different ideas about when your out of memory. This has manifested itself in the past as a spinning arc_reclaim_thread. This patch abandons the emulated Solaris interfaces in favor of the prefered Linux interface. That means moving the bulk of the memory reclaim logic out of the arc_reclaim_thread and in to the evict driven shrinker callback. The Linux VM will call this function when it needs memory. The ARC is then responsible for attempting to free the requested amount of memory if possible. Several interfaces have been modified to accomidate this approach, however the basic user space implementation remains the same. The following changes almost exclusively just apply to the kernel implementation. * Removed the hdr_recl() reclaim callback which is redundant with the broader arc_shrinker_func(). * Reduced arc_grow_retry to 5 seconds from 60. This is now used internally in the ARC with arc_no_grow to indicate that direct reclaim was recently performed. This typically indicates a rapid change in memory demands which the kswapd threads were unable to keep ahead of. As long as direct reclaim is happening once every 5 seconds arc growth will be paused to avoid further contributing to the existing memory pressure. The more common indirect reclaim paths will not set arc_no_grow. * arc_shrink() has been extended to take the number of bytes by which arc_c should be reduced. This allows for a more granual reduction of the arc target. Since the kernel provides a reclaim value to the arc_shrinker_func() this value is used instead of 1<<arc_shrink_shift. * arc_reclaim_needed() has been removed. It was used to determine if the system was under memory pressure and relied extensively on Solaris specific VM interfaces. In most case the new code just checks arc_no_grow which indicates that within the last arc_grow_retry seconds direct memory reclaim occurred. * arc_memory_throttle() has been updated to always include the amount of evictable memory (arc and page cache) in its free space calculations. This space is largely available in most call paths due to direct memory reclaim. * The Solaris pageout code was also removed to avoid confusion. It has always been disabled due to proc_pageout being defined as NULL in the Linux port. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-13 21:29:16 +00:00
arc_kmem_reap_now(arc_reclaim_strategy_t strat, uint64_t bytes)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
{
size_t i;
kmem_cache_t *prev_cache = NULL;
kmem_cache_t *prev_data_cache = NULL;
extern kmem_cache_t *zio_buf_cache[];
extern kmem_cache_t *zio_data_buf_cache[];
/*
* An aggressive reclamation will shrink the cache size as well as
* reap free buffers from the arc kmem caches.
*/
if (strat == ARC_RECLAIM_AGGR)
Integrate ARC more tightly with Linux Under Solaris the ARC was designed to stay one step ahead of the VM subsystem. It would attempt to recognize low memory situtions before they occured and evict data from the cache. It would also make assessments about if there was enough free memory to perform a specific operation. This was all possible because Solaris exposes a fairly decent view of the memory state of the system to other kernel threads. Linux on the other hand does not make this information easily available. To avoid extensive modifications to the ARC the SPL attempts to provide these same interfaces. While this works it is not ideal and problems can arise when the ARC and Linux have different ideas about when your out of memory. This has manifested itself in the past as a spinning arc_reclaim_thread. This patch abandons the emulated Solaris interfaces in favor of the prefered Linux interface. That means moving the bulk of the memory reclaim logic out of the arc_reclaim_thread and in to the evict driven shrinker callback. The Linux VM will call this function when it needs memory. The ARC is then responsible for attempting to free the requested amount of memory if possible. Several interfaces have been modified to accomidate this approach, however the basic user space implementation remains the same. The following changes almost exclusively just apply to the kernel implementation. * Removed the hdr_recl() reclaim callback which is redundant with the broader arc_shrinker_func(). * Reduced arc_grow_retry to 5 seconds from 60. This is now used internally in the ARC with arc_no_grow to indicate that direct reclaim was recently performed. This typically indicates a rapid change in memory demands which the kswapd threads were unable to keep ahead of. As long as direct reclaim is happening once every 5 seconds arc growth will be paused to avoid further contributing to the existing memory pressure. The more common indirect reclaim paths will not set arc_no_grow. * arc_shrink() has been extended to take the number of bytes by which arc_c should be reduced. This allows for a more granual reduction of the arc target. Since the kernel provides a reclaim value to the arc_shrinker_func() this value is used instead of 1<<arc_shrink_shift. * arc_reclaim_needed() has been removed. It was used to determine if the system was under memory pressure and relied extensively on Solaris specific VM interfaces. In most case the new code just checks arc_no_grow which indicates that within the last arc_grow_retry seconds direct memory reclaim occurred. * arc_memory_throttle() has been updated to always include the amount of evictable memory (arc and page cache) in its free space calculations. This space is largely available in most call paths due to direct memory reclaim. * The Solaris pageout code was also removed to avoid confusion. It has always been disabled due to proc_pageout being defined as NULL in the Linux port. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-13 21:29:16 +00:00
arc_shrink(bytes);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
for (i = 0; i < SPA_MAXBLOCKSIZE >> SPA_MINBLOCKSHIFT; i++) {
if (zio_buf_cache[i] != prev_cache) {
prev_cache = zio_buf_cache[i];
kmem_cache_reap_now(zio_buf_cache[i]);
}
if (zio_data_buf_cache[i] != prev_data_cache) {
prev_data_cache = zio_data_buf_cache[i];
kmem_cache_reap_now(zio_data_buf_cache[i]);
}
}
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
kmem_cache_reap_now(buf_cache);
kmem_cache_reap_now(hdr_cache);
}
Integrate ARC more tightly with Linux Under Solaris the ARC was designed to stay one step ahead of the VM subsystem. It would attempt to recognize low memory situtions before they occured and evict data from the cache. It would also make assessments about if there was enough free memory to perform a specific operation. This was all possible because Solaris exposes a fairly decent view of the memory state of the system to other kernel threads. Linux on the other hand does not make this information easily available. To avoid extensive modifications to the ARC the SPL attempts to provide these same interfaces. While this works it is not ideal and problems can arise when the ARC and Linux have different ideas about when your out of memory. This has manifested itself in the past as a spinning arc_reclaim_thread. This patch abandons the emulated Solaris interfaces in favor of the prefered Linux interface. That means moving the bulk of the memory reclaim logic out of the arc_reclaim_thread and in to the evict driven shrinker callback. The Linux VM will call this function when it needs memory. The ARC is then responsible for attempting to free the requested amount of memory if possible. Several interfaces have been modified to accomidate this approach, however the basic user space implementation remains the same. The following changes almost exclusively just apply to the kernel implementation. * Removed the hdr_recl() reclaim callback which is redundant with the broader arc_shrinker_func(). * Reduced arc_grow_retry to 5 seconds from 60. This is now used internally in the ARC with arc_no_grow to indicate that direct reclaim was recently performed. This typically indicates a rapid change in memory demands which the kswapd threads were unable to keep ahead of. As long as direct reclaim is happening once every 5 seconds arc growth will be paused to avoid further contributing to the existing memory pressure. The more common indirect reclaim paths will not set arc_no_grow. * arc_shrink() has been extended to take the number of bytes by which arc_c should be reduced. This allows for a more granual reduction of the arc target. Since the kernel provides a reclaim value to the arc_shrinker_func() this value is used instead of 1<<arc_shrink_shift. * arc_reclaim_needed() has been removed. It was used to determine if the system was under memory pressure and relied extensively on Solaris specific VM interfaces. In most case the new code just checks arc_no_grow which indicates that within the last arc_grow_retry seconds direct memory reclaim occurred. * arc_memory_throttle() has been updated to always include the amount of evictable memory (arc and page cache) in its free space calculations. This space is largely available in most call paths due to direct memory reclaim. * The Solaris pageout code was also removed to avoid confusion. It has always been disabled due to proc_pageout being defined as NULL in the Linux port. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-13 21:29:16 +00:00
/*
* Unlike other ZFS implementations this thread is only responsible for
* adapting the target ARC size on Linux. The responsibility for memory
* reclamation has been entirely delegated to the arc_shrinker_func()
* which is registered with the VM. To reflect this change in behavior
* the arc_reclaim thread has been renamed to arc_adapt.
*/
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
static void
Integrate ARC more tightly with Linux Under Solaris the ARC was designed to stay one step ahead of the VM subsystem. It would attempt to recognize low memory situtions before they occured and evict data from the cache. It would also make assessments about if there was enough free memory to perform a specific operation. This was all possible because Solaris exposes a fairly decent view of the memory state of the system to other kernel threads. Linux on the other hand does not make this information easily available. To avoid extensive modifications to the ARC the SPL attempts to provide these same interfaces. While this works it is not ideal and problems can arise when the ARC and Linux have different ideas about when your out of memory. This has manifested itself in the past as a spinning arc_reclaim_thread. This patch abandons the emulated Solaris interfaces in favor of the prefered Linux interface. That means moving the bulk of the memory reclaim logic out of the arc_reclaim_thread and in to the evict driven shrinker callback. The Linux VM will call this function when it needs memory. The ARC is then responsible for attempting to free the requested amount of memory if possible. Several interfaces have been modified to accomidate this approach, however the basic user space implementation remains the same. The following changes almost exclusively just apply to the kernel implementation. * Removed the hdr_recl() reclaim callback which is redundant with the broader arc_shrinker_func(). * Reduced arc_grow_retry to 5 seconds from 60. This is now used internally in the ARC with arc_no_grow to indicate that direct reclaim was recently performed. This typically indicates a rapid change in memory demands which the kswapd threads were unable to keep ahead of. As long as direct reclaim is happening once every 5 seconds arc growth will be paused to avoid further contributing to the existing memory pressure. The more common indirect reclaim paths will not set arc_no_grow. * arc_shrink() has been extended to take the number of bytes by which arc_c should be reduced. This allows for a more granual reduction of the arc target. Since the kernel provides a reclaim value to the arc_shrinker_func() this value is used instead of 1<<arc_shrink_shift. * arc_reclaim_needed() has been removed. It was used to determine if the system was under memory pressure and relied extensively on Solaris specific VM interfaces. In most case the new code just checks arc_no_grow which indicates that within the last arc_grow_retry seconds direct memory reclaim occurred. * arc_memory_throttle() has been updated to always include the amount of evictable memory (arc and page cache) in its free space calculations. This space is largely available in most call paths due to direct memory reclaim. * The Solaris pageout code was also removed to avoid confusion. It has always been disabled due to proc_pageout being defined as NULL in the Linux port. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-13 21:29:16 +00:00
arc_adapt_thread(void)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
{
callb_cpr_t cpr;
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
int64_t prune;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
CALLB_CPR_INIT(&cpr, &arc_reclaim_thr_lock, callb_generic_cpr, FTAG);
mutex_enter(&arc_reclaim_thr_lock);
while (arc_thread_exit == 0) {
Integrate ARC more tightly with Linux Under Solaris the ARC was designed to stay one step ahead of the VM subsystem. It would attempt to recognize low memory situtions before they occured and evict data from the cache. It would also make assessments about if there was enough free memory to perform a specific operation. This was all possible because Solaris exposes a fairly decent view of the memory state of the system to other kernel threads. Linux on the other hand does not make this information easily available. To avoid extensive modifications to the ARC the SPL attempts to provide these same interfaces. While this works it is not ideal and problems can arise when the ARC and Linux have different ideas about when your out of memory. This has manifested itself in the past as a spinning arc_reclaim_thread. This patch abandons the emulated Solaris interfaces in favor of the prefered Linux interface. That means moving the bulk of the memory reclaim logic out of the arc_reclaim_thread and in to the evict driven shrinker callback. The Linux VM will call this function when it needs memory. The ARC is then responsible for attempting to free the requested amount of memory if possible. Several interfaces have been modified to accomidate this approach, however the basic user space implementation remains the same. The following changes almost exclusively just apply to the kernel implementation. * Removed the hdr_recl() reclaim callback which is redundant with the broader arc_shrinker_func(). * Reduced arc_grow_retry to 5 seconds from 60. This is now used internally in the ARC with arc_no_grow to indicate that direct reclaim was recently performed. This typically indicates a rapid change in memory demands which the kswapd threads were unable to keep ahead of. As long as direct reclaim is happening once every 5 seconds arc growth will be paused to avoid further contributing to the existing memory pressure. The more common indirect reclaim paths will not set arc_no_grow. * arc_shrink() has been extended to take the number of bytes by which arc_c should be reduced. This allows for a more granual reduction of the arc target. Since the kernel provides a reclaim value to the arc_shrinker_func() this value is used instead of 1<<arc_shrink_shift. * arc_reclaim_needed() has been removed. It was used to determine if the system was under memory pressure and relied extensively on Solaris specific VM interfaces. In most case the new code just checks arc_no_grow which indicates that within the last arc_grow_retry seconds direct memory reclaim occurred. * arc_memory_throttle() has been updated to always include the amount of evictable memory (arc and page cache) in its free space calculations. This space is largely available in most call paths due to direct memory reclaim. * The Solaris pageout code was also removed to avoid confusion. It has always been disabled due to proc_pageout being defined as NULL in the Linux port. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-13 21:29:16 +00:00
#ifndef _KERNEL
arc_reclaim_strategy_t last_reclaim = ARC_RECLAIM_CONS;
if (spa_get_random(100) == 0) {
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
if (arc_no_grow) {
if (last_reclaim == ARC_RECLAIM_CONS) {
last_reclaim = ARC_RECLAIM_AGGR;
} else {
last_reclaim = ARC_RECLAIM_CONS;
}
} else {
arc_no_grow = TRUE;
last_reclaim = ARC_RECLAIM_AGGR;
membar_producer();
}
/* reset the growth delay for every reclaim */
Integrate ARC more tightly with Linux Under Solaris the ARC was designed to stay one step ahead of the VM subsystem. It would attempt to recognize low memory situtions before they occured and evict data from the cache. It would also make assessments about if there was enough free memory to perform a specific operation. This was all possible because Solaris exposes a fairly decent view of the memory state of the system to other kernel threads. Linux on the other hand does not make this information easily available. To avoid extensive modifications to the ARC the SPL attempts to provide these same interfaces. While this works it is not ideal and problems can arise when the ARC and Linux have different ideas about when your out of memory. This has manifested itself in the past as a spinning arc_reclaim_thread. This patch abandons the emulated Solaris interfaces in favor of the prefered Linux interface. That means moving the bulk of the memory reclaim logic out of the arc_reclaim_thread and in to the evict driven shrinker callback. The Linux VM will call this function when it needs memory. The ARC is then responsible for attempting to free the requested amount of memory if possible. Several interfaces have been modified to accomidate this approach, however the basic user space implementation remains the same. The following changes almost exclusively just apply to the kernel implementation. * Removed the hdr_recl() reclaim callback which is redundant with the broader arc_shrinker_func(). * Reduced arc_grow_retry to 5 seconds from 60. This is now used internally in the ARC with arc_no_grow to indicate that direct reclaim was recently performed. This typically indicates a rapid change in memory demands which the kswapd threads were unable to keep ahead of. As long as direct reclaim is happening once every 5 seconds arc growth will be paused to avoid further contributing to the existing memory pressure. The more common indirect reclaim paths will not set arc_no_grow. * arc_shrink() has been extended to take the number of bytes by which arc_c should be reduced. This allows for a more granual reduction of the arc target. Since the kernel provides a reclaim value to the arc_shrinker_func() this value is used instead of 1<<arc_shrink_shift. * arc_reclaim_needed() has been removed. It was used to determine if the system was under memory pressure and relied extensively on Solaris specific VM interfaces. In most case the new code just checks arc_no_grow which indicates that within the last arc_grow_retry seconds direct memory reclaim occurred. * arc_memory_throttle() has been updated to always include the amount of evictable memory (arc and page cache) in its free space calculations. This space is largely available in most call paths due to direct memory reclaim. * The Solaris pageout code was also removed to avoid confusion. It has always been disabled due to proc_pageout being defined as NULL in the Linux port. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-13 21:29:16 +00:00
arc_grow_time = ddi_get_lbolt()+(arc_grow_retry * hz);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Integrate ARC more tightly with Linux Under Solaris the ARC was designed to stay one step ahead of the VM subsystem. It would attempt to recognize low memory situtions before they occured and evict data from the cache. It would also make assessments about if there was enough free memory to perform a specific operation. This was all possible because Solaris exposes a fairly decent view of the memory state of the system to other kernel threads. Linux on the other hand does not make this information easily available. To avoid extensive modifications to the ARC the SPL attempts to provide these same interfaces. While this works it is not ideal and problems can arise when the ARC and Linux have different ideas about when your out of memory. This has manifested itself in the past as a spinning arc_reclaim_thread. This patch abandons the emulated Solaris interfaces in favor of the prefered Linux interface. That means moving the bulk of the memory reclaim logic out of the arc_reclaim_thread and in to the evict driven shrinker callback. The Linux VM will call this function when it needs memory. The ARC is then responsible for attempting to free the requested amount of memory if possible. Several interfaces have been modified to accomidate this approach, however the basic user space implementation remains the same. The following changes almost exclusively just apply to the kernel implementation. * Removed the hdr_recl() reclaim callback which is redundant with the broader arc_shrinker_func(). * Reduced arc_grow_retry to 5 seconds from 60. This is now used internally in the ARC with arc_no_grow to indicate that direct reclaim was recently performed. This typically indicates a rapid change in memory demands which the kswapd threads were unable to keep ahead of. As long as direct reclaim is happening once every 5 seconds arc growth will be paused to avoid further contributing to the existing memory pressure. The more common indirect reclaim paths will not set arc_no_grow. * arc_shrink() has been extended to take the number of bytes by which arc_c should be reduced. This allows for a more granual reduction of the arc target. Since the kernel provides a reclaim value to the arc_shrinker_func() this value is used instead of 1<<arc_shrink_shift. * arc_reclaim_needed() has been removed. It was used to determine if the system was under memory pressure and relied extensively on Solaris specific VM interfaces. In most case the new code just checks arc_no_grow which indicates that within the last arc_grow_retry seconds direct memory reclaim occurred. * arc_memory_throttle() has been updated to always include the amount of evictable memory (arc and page cache) in its free space calculations. This space is largely available in most call paths due to direct memory reclaim. * The Solaris pageout code was also removed to avoid confusion. It has always been disabled due to proc_pageout being defined as NULL in the Linux port. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-13 21:29:16 +00:00
arc_kmem_reap_now(last_reclaim, 0);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
arc_warm = B_TRUE;
Integrate ARC more tightly with Linux Under Solaris the ARC was designed to stay one step ahead of the VM subsystem. It would attempt to recognize low memory situtions before they occured and evict data from the cache. It would also make assessments about if there was enough free memory to perform a specific operation. This was all possible because Solaris exposes a fairly decent view of the memory state of the system to other kernel threads. Linux on the other hand does not make this information easily available. To avoid extensive modifications to the ARC the SPL attempts to provide these same interfaces. While this works it is not ideal and problems can arise when the ARC and Linux have different ideas about when your out of memory. This has manifested itself in the past as a spinning arc_reclaim_thread. This patch abandons the emulated Solaris interfaces in favor of the prefered Linux interface. That means moving the bulk of the memory reclaim logic out of the arc_reclaim_thread and in to the evict driven shrinker callback. The Linux VM will call this function when it needs memory. The ARC is then responsible for attempting to free the requested amount of memory if possible. Several interfaces have been modified to accomidate this approach, however the basic user space implementation remains the same. The following changes almost exclusively just apply to the kernel implementation. * Removed the hdr_recl() reclaim callback which is redundant with the broader arc_shrinker_func(). * Reduced arc_grow_retry to 5 seconds from 60. This is now used internally in the ARC with arc_no_grow to indicate that direct reclaim was recently performed. This typically indicates a rapid change in memory demands which the kswapd threads were unable to keep ahead of. As long as direct reclaim is happening once every 5 seconds arc growth will be paused to avoid further contributing to the existing memory pressure. The more common indirect reclaim paths will not set arc_no_grow. * arc_shrink() has been extended to take the number of bytes by which arc_c should be reduced. This allows for a more granual reduction of the arc target. Since the kernel provides a reclaim value to the arc_shrinker_func() this value is used instead of 1<<arc_shrink_shift. * arc_reclaim_needed() has been removed. It was used to determine if the system was under memory pressure and relied extensively on Solaris specific VM interfaces. In most case the new code just checks arc_no_grow which indicates that within the last arc_grow_retry seconds direct memory reclaim occurred. * arc_memory_throttle() has been updated to always include the amount of evictable memory (arc and page cache) in its free space calculations. This space is largely available in most call paths due to direct memory reclaim. * The Solaris pageout code was also removed to avoid confusion. It has always been disabled due to proc_pageout being defined as NULL in the Linux port. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-13 21:29:16 +00:00
}
#endif /* !_KERNEL */
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Integrate ARC more tightly with Linux Under Solaris the ARC was designed to stay one step ahead of the VM subsystem. It would attempt to recognize low memory situtions before they occured and evict data from the cache. It would also make assessments about if there was enough free memory to perform a specific operation. This was all possible because Solaris exposes a fairly decent view of the memory state of the system to other kernel threads. Linux on the other hand does not make this information easily available. To avoid extensive modifications to the ARC the SPL attempts to provide these same interfaces. While this works it is not ideal and problems can arise when the ARC and Linux have different ideas about when your out of memory. This has manifested itself in the past as a spinning arc_reclaim_thread. This patch abandons the emulated Solaris interfaces in favor of the prefered Linux interface. That means moving the bulk of the memory reclaim logic out of the arc_reclaim_thread and in to the evict driven shrinker callback. The Linux VM will call this function when it needs memory. The ARC is then responsible for attempting to free the requested amount of memory if possible. Several interfaces have been modified to accomidate this approach, however the basic user space implementation remains the same. The following changes almost exclusively just apply to the kernel implementation. * Removed the hdr_recl() reclaim callback which is redundant with the broader arc_shrinker_func(). * Reduced arc_grow_retry to 5 seconds from 60. This is now used internally in the ARC with arc_no_grow to indicate that direct reclaim was recently performed. This typically indicates a rapid change in memory demands which the kswapd threads were unable to keep ahead of. As long as direct reclaim is happening once every 5 seconds arc growth will be paused to avoid further contributing to the existing memory pressure. The more common indirect reclaim paths will not set arc_no_grow. * arc_shrink() has been extended to take the number of bytes by which arc_c should be reduced. This allows for a more granual reduction of the arc target. Since the kernel provides a reclaim value to the arc_shrinker_func() this value is used instead of 1<<arc_shrink_shift. * arc_reclaim_needed() has been removed. It was used to determine if the system was under memory pressure and relied extensively on Solaris specific VM interfaces. In most case the new code just checks arc_no_grow which indicates that within the last arc_grow_retry seconds direct memory reclaim occurred. * arc_memory_throttle() has been updated to always include the amount of evictable memory (arc and page cache) in its free space calculations. This space is largely available in most call paths due to direct memory reclaim. * The Solaris pageout code was also removed to avoid confusion. It has always been disabled due to proc_pageout being defined as NULL in the Linux port. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-13 21:29:16 +00:00
/* No recent memory pressure allow the ARC to grow. */
if (arc_no_grow && ddi_get_lbolt() >= arc_grow_time)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
arc_no_grow = FALSE;
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
/*
* Keep meta data usage within limits, arc_shrink() is not
* used to avoid collapsing the arc_c value when only the
* arc_meta_limit is being exceeded.
*/
prune = (int64_t)arc_meta_used - (int64_t)arc_meta_limit;
if (prune > 0)
arc_adjust_meta(prune, B_TRUE);
Enforce ARC meta-data limits This change ensures the ARC meta-data limits are enforced. Without this enforcement meta-data can grow to consume all of the ARC cache pushing out data and hurting performance. The cache is aggressively reclaimed but this is a soft and not a hard limit. The cache may exceed the set limit briefly before being brought under control. By default 25% of the ARC capacity can be used for meta-data. This limit can be tuned by setting the 'zfs_arc_meta_limit' module option. Once this limit is exceeded meta-data reclaim will occur in 3 percent chunks, or may be tuned using 'arc_reduce_dnlc_percent'. Closes #193
2011-03-31 01:59:17 +00:00
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
arc_adjust();
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
if (arc_eviction_list != NULL)
arc_do_user_evicts();
/* block until needed, or one second, whichever is shorter */
CALLB_CPR_SAFE_BEGIN(&cpr);
Use cv_timedwait_interruptible in arc The issue is that cv_timedwait() sleeps uninterruptibly to block signals and avoid waking up early. Under Linux this counts against the load average keeping it artificially high. This change allows the arc to sleep interruptibly which mean it may be woken up early due to a signal. Normally this means some extra care must be taken to handle a potential signal. But for the arcs usage of cv_timedwait() there is no harm in waking up before the timeout expires so no extra handling is required.
2010-12-10 20:00:00 +00:00
(void) cv_timedwait_interruptible(&arc_reclaim_thr_cv,
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
&arc_reclaim_thr_lock, (ddi_get_lbolt() + hz));
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
CALLB_CPR_SAFE_END(&cpr, &arc_reclaim_thr_lock);
}
arc_thread_exit = 0;
cv_broadcast(&arc_reclaim_thr_cv);
CALLB_CPR_EXIT(&cpr); /* drops arc_reclaim_thr_lock */
thread_exit();
}
Add direct+indirect ARC reclaim Under OpenSolaris all memory reclaim is done asyncronously. Under Linux memory reclaim is done asynchronously _and_ synchronously. When a process allocates memory with GFP_KERNEL it explicitly allows the kernel to do reclaim on its behalf to satify the allocation. If that GFP_KERNEL allocation fails the kernel may take more drastic measures to reclaim the memory such as killing user space processes. This was observed to happen with ZFS because the ARC could consume a large fraction of the system memory but no synchronous reclaim could be performed on it. The result was GFP_KERNEL allocations could fail resulting in OOM events, and only moments latter the arc_reclaim thread would free unused memory from the ARC. This change leaves the arc_thread in place to manage the fundamental ARC behavior. But it adds a synchronous (direct) reclaim path for the ARC which can be called when memory is badly needed. It also adds an asynchronous (indirect) reclaim path which is called much more frequently to prune the ARC slab caches.
2011-03-30 01:08:59 +00:00
#ifdef _KERNEL
/*
Integrate ARC more tightly with Linux Under Solaris the ARC was designed to stay one step ahead of the VM subsystem. It would attempt to recognize low memory situtions before they occured and evict data from the cache. It would also make assessments about if there was enough free memory to perform a specific operation. This was all possible because Solaris exposes a fairly decent view of the memory state of the system to other kernel threads. Linux on the other hand does not make this information easily available. To avoid extensive modifications to the ARC the SPL attempts to provide these same interfaces. While this works it is not ideal and problems can arise when the ARC and Linux have different ideas about when your out of memory. This has manifested itself in the past as a spinning arc_reclaim_thread. This patch abandons the emulated Solaris interfaces in favor of the prefered Linux interface. That means moving the bulk of the memory reclaim logic out of the arc_reclaim_thread and in to the evict driven shrinker callback. The Linux VM will call this function when it needs memory. The ARC is then responsible for attempting to free the requested amount of memory if possible. Several interfaces have been modified to accomidate this approach, however the basic user space implementation remains the same. The following changes almost exclusively just apply to the kernel implementation. * Removed the hdr_recl() reclaim callback which is redundant with the broader arc_shrinker_func(). * Reduced arc_grow_retry to 5 seconds from 60. This is now used internally in the ARC with arc_no_grow to indicate that direct reclaim was recently performed. This typically indicates a rapid change in memory demands which the kswapd threads were unable to keep ahead of. As long as direct reclaim is happening once every 5 seconds arc growth will be paused to avoid further contributing to the existing memory pressure. The more common indirect reclaim paths will not set arc_no_grow. * arc_shrink() has been extended to take the number of bytes by which arc_c should be reduced. This allows for a more granual reduction of the arc target. Since the kernel provides a reclaim value to the arc_shrinker_func() this value is used instead of 1<<arc_shrink_shift. * arc_reclaim_needed() has been removed. It was used to determine if the system was under memory pressure and relied extensively on Solaris specific VM interfaces. In most case the new code just checks arc_no_grow which indicates that within the last arc_grow_retry seconds direct memory reclaim occurred. * arc_memory_throttle() has been updated to always include the amount of evictable memory (arc and page cache) in its free space calculations. This space is largely available in most call paths due to direct memory reclaim. * The Solaris pageout code was also removed to avoid confusion. It has always been disabled due to proc_pageout being defined as NULL in the Linux port. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-13 21:29:16 +00:00
* Determine the amount of memory eligible for eviction contained in the
* ARC. All clean data reported by the ghost lists can always be safely
* evicted. Due to arc_c_min, the same does not hold for all clean data
* contained by the regular mru and mfu lists.
*
* In the case of the regular mru and mfu lists, we need to report as
* much clean data as possible, such that evicting that same reported
* data will not bring arc_size below arc_c_min. Thus, in certain
* circumstances, the total amount of clean data in the mru and mfu
* lists might not actually be evictable.
*
* The following two distinct cases are accounted for:
*
* 1. The sum of the amount of dirty data contained by both the mru and
* mfu lists, plus the ARC's other accounting (e.g. the anon list),
* is greater than or equal to arc_c_min.
* (i.e. amount of dirty data >= arc_c_min)
*
* This is the easy case; all clean data contained by the mru and mfu
* lists is evictable. Evicting all clean data can only drop arc_size
* to the amount of dirty data, which is greater than arc_c_min.
*
* 2. The sum of the amount of dirty data contained by both the mru and
* mfu lists, plus the ARC's other accounting (e.g. the anon list),
* is less than arc_c_min.
* (i.e. arc_c_min > amount of dirty data)
*
* 2.1. arc_size is greater than or equal arc_c_min.
* (i.e. arc_size >= arc_c_min > amount of dirty data)
*
* In this case, not all clean data from the regular mru and mfu
* lists is actually evictable; we must leave enough clean data
* to keep arc_size above arc_c_min. Thus, the maximum amount of
* evictable data from the two lists combined, is exactly the
* difference between arc_size and arc_c_min.
*
* 2.2. arc_size is less than arc_c_min
* (i.e. arc_c_min > arc_size > amount of dirty data)
*
* In this case, none of the data contained in the mru and mfu
* lists is evictable, even if it's clean. Since arc_size is
* already below arc_c_min, evicting any more would only
* increase this negative difference.
Add direct+indirect ARC reclaim Under OpenSolaris all memory reclaim is done asyncronously. Under Linux memory reclaim is done asynchronously _and_ synchronously. When a process allocates memory with GFP_KERNEL it explicitly allows the kernel to do reclaim on its behalf to satify the allocation. If that GFP_KERNEL allocation fails the kernel may take more drastic measures to reclaim the memory such as killing user space processes. This was observed to happen with ZFS because the ARC could consume a large fraction of the system memory but no synchronous reclaim could be performed on it. The result was GFP_KERNEL allocations could fail resulting in OOM events, and only moments latter the arc_reclaim thread would free unused memory from the ARC. This change leaves the arc_thread in place to manage the fundamental ARC behavior. But it adds a synchronous (direct) reclaim path for the ARC which can be called when memory is badly needed. It also adds an asynchronous (indirect) reclaim path which is called much more frequently to prune the ARC slab caches.
2011-03-30 01:08:59 +00:00
*/
Integrate ARC more tightly with Linux Under Solaris the ARC was designed to stay one step ahead of the VM subsystem. It would attempt to recognize low memory situtions before they occured and evict data from the cache. It would also make assessments about if there was enough free memory to perform a specific operation. This was all possible because Solaris exposes a fairly decent view of the memory state of the system to other kernel threads. Linux on the other hand does not make this information easily available. To avoid extensive modifications to the ARC the SPL attempts to provide these same interfaces. While this works it is not ideal and problems can arise when the ARC and Linux have different ideas about when your out of memory. This has manifested itself in the past as a spinning arc_reclaim_thread. This patch abandons the emulated Solaris interfaces in favor of the prefered Linux interface. That means moving the bulk of the memory reclaim logic out of the arc_reclaim_thread and in to the evict driven shrinker callback. The Linux VM will call this function when it needs memory. The ARC is then responsible for attempting to free the requested amount of memory if possible. Several interfaces have been modified to accomidate this approach, however the basic user space implementation remains the same. The following changes almost exclusively just apply to the kernel implementation. * Removed the hdr_recl() reclaim callback which is redundant with the broader arc_shrinker_func(). * Reduced arc_grow_retry to 5 seconds from 60. This is now used internally in the ARC with arc_no_grow to indicate that direct reclaim was recently performed. This typically indicates a rapid change in memory demands which the kswapd threads were unable to keep ahead of. As long as direct reclaim is happening once every 5 seconds arc growth will be paused to avoid further contributing to the existing memory pressure. The more common indirect reclaim paths will not set arc_no_grow. * arc_shrink() has been extended to take the number of bytes by which arc_c should be reduced. This allows for a more granual reduction of the arc target. Since the kernel provides a reclaim value to the arc_shrinker_func() this value is used instead of 1<<arc_shrink_shift. * arc_reclaim_needed() has been removed. It was used to determine if the system was under memory pressure and relied extensively on Solaris specific VM interfaces. In most case the new code just checks arc_no_grow which indicates that within the last arc_grow_retry seconds direct memory reclaim occurred. * arc_memory_throttle() has been updated to always include the amount of evictable memory (arc and page cache) in its free space calculations. This space is largely available in most call paths due to direct memory reclaim. * The Solaris pageout code was also removed to avoid confusion. It has always been disabled due to proc_pageout being defined as NULL in the Linux port. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-13 21:29:16 +00:00
static uint64_t
arc_evictable_memory(void) {
uint64_t arc_clean =
arc_mru->arcs_lsize[ARC_BUFC_DATA] +
arc_mru->arcs_lsize[ARC_BUFC_METADATA] +
arc_mfu->arcs_lsize[ARC_BUFC_DATA] +
arc_mfu->arcs_lsize[ARC_BUFC_METADATA];
uint64_t ghost_clean =
arc_mru_ghost->arcs_lsize[ARC_BUFC_DATA] +
arc_mru_ghost->arcs_lsize[ARC_BUFC_METADATA] +
arc_mfu_ghost->arcs_lsize[ARC_BUFC_DATA] +
arc_mfu_ghost->arcs_lsize[ARC_BUFC_METADATA];
uint64_t arc_dirty = MAX((int64_t)arc_size - (int64_t)arc_clean, 0);
if (arc_dirty >= arc_c_min)
return (ghost_clean + arc_clean);
return (ghost_clean + MAX((int64_t)arc_size - (int64_t)arc_c_min, 0));
}
Linux 3.0 compat, shrinker compatibility To accomindate the updated Linux 3.0 shrinker API the spl shrinker compatibility code was updated. Unfortunately, this couldn't be done cleanly without slightly adjusting the comapt API. See spl commit a55bcaad181096d764e12d847e3091cd7b15509a. This commit updates the ZFS code to use the slightly modified API. You must use the latest SPL if your building ZFS.
2011-06-21 21:26:51 +00:00
static int
__arc_shrinker_func(struct shrinker *shrink, struct shrink_control *sc)
Add direct+indirect ARC reclaim Under OpenSolaris all memory reclaim is done asyncronously. Under Linux memory reclaim is done asynchronously _and_ synchronously. When a process allocates memory with GFP_KERNEL it explicitly allows the kernel to do reclaim on its behalf to satify the allocation. If that GFP_KERNEL allocation fails the kernel may take more drastic measures to reclaim the memory such as killing user space processes. This was observed to happen with ZFS because the ARC could consume a large fraction of the system memory but no synchronous reclaim could be performed on it. The result was GFP_KERNEL allocations could fail resulting in OOM events, and only moments latter the arc_reclaim thread would free unused memory from the ARC. This change leaves the arc_thread in place to manage the fundamental ARC behavior. But it adds a synchronous (direct) reclaim path for the ARC which can be called when memory is badly needed. It also adds an asynchronous (indirect) reclaim path which is called much more frequently to prune the ARC slab caches.
2011-03-30 01:08:59 +00:00
{
Integrate ARC more tightly with Linux Under Solaris the ARC was designed to stay one step ahead of the VM subsystem. It would attempt to recognize low memory situtions before they occured and evict data from the cache. It would also make assessments about if there was enough free memory to perform a specific operation. This was all possible because Solaris exposes a fairly decent view of the memory state of the system to other kernel threads. Linux on the other hand does not make this information easily available. To avoid extensive modifications to the ARC the SPL attempts to provide these same interfaces. While this works it is not ideal and problems can arise when the ARC and Linux have different ideas about when your out of memory. This has manifested itself in the past as a spinning arc_reclaim_thread. This patch abandons the emulated Solaris interfaces in favor of the prefered Linux interface. That means moving the bulk of the memory reclaim logic out of the arc_reclaim_thread and in to the evict driven shrinker callback. The Linux VM will call this function when it needs memory. The ARC is then responsible for attempting to free the requested amount of memory if possible. Several interfaces have been modified to accomidate this approach, however the basic user space implementation remains the same. The following changes almost exclusively just apply to the kernel implementation. * Removed the hdr_recl() reclaim callback which is redundant with the broader arc_shrinker_func(). * Reduced arc_grow_retry to 5 seconds from 60. This is now used internally in the ARC with arc_no_grow to indicate that direct reclaim was recently performed. This typically indicates a rapid change in memory demands which the kswapd threads were unable to keep ahead of. As long as direct reclaim is happening once every 5 seconds arc growth will be paused to avoid further contributing to the existing memory pressure. The more common indirect reclaim paths will not set arc_no_grow. * arc_shrink() has been extended to take the number of bytes by which arc_c should be reduced. This allows for a more granual reduction of the arc target. Since the kernel provides a reclaim value to the arc_shrinker_func() this value is used instead of 1<<arc_shrink_shift. * arc_reclaim_needed() has been removed. It was used to determine if the system was under memory pressure and relied extensively on Solaris specific VM interfaces. In most case the new code just checks arc_no_grow which indicates that within the last arc_grow_retry seconds direct memory reclaim occurred. * arc_memory_throttle() has been updated to always include the amount of evictable memory (arc and page cache) in its free space calculations. This space is largely available in most call paths due to direct memory reclaim. * The Solaris pageout code was also removed to avoid confusion. It has always been disabled due to proc_pageout being defined as NULL in the Linux port. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-13 21:29:16 +00:00
uint64_t pages;
Add direct+indirect ARC reclaim Under OpenSolaris all memory reclaim is done asyncronously. Under Linux memory reclaim is done asynchronously _and_ synchronously. When a process allocates memory with GFP_KERNEL it explicitly allows the kernel to do reclaim on its behalf to satify the allocation. If that GFP_KERNEL allocation fails the kernel may take more drastic measures to reclaim the memory such as killing user space processes. This was observed to happen with ZFS because the ARC could consume a large fraction of the system memory but no synchronous reclaim could be performed on it. The result was GFP_KERNEL allocations could fail resulting in OOM events, and only moments latter the arc_reclaim thread would free unused memory from the ARC. This change leaves the arc_thread in place to manage the fundamental ARC behavior. But it adds a synchronous (direct) reclaim path for the ARC which can be called when memory is badly needed. It also adds an asynchronous (indirect) reclaim path which is called much more frequently to prune the ARC slab caches.
2011-03-30 01:08:59 +00:00
Integrate ARC more tightly with Linux Under Solaris the ARC was designed to stay one step ahead of the VM subsystem. It would attempt to recognize low memory situtions before they occured and evict data from the cache. It would also make assessments about if there was enough free memory to perform a specific operation. This was all possible because Solaris exposes a fairly decent view of the memory state of the system to other kernel threads. Linux on the other hand does not make this information easily available. To avoid extensive modifications to the ARC the SPL attempts to provide these same interfaces. While this works it is not ideal and problems can arise when the ARC and Linux have different ideas about when your out of memory. This has manifested itself in the past as a spinning arc_reclaim_thread. This patch abandons the emulated Solaris interfaces in favor of the prefered Linux interface. That means moving the bulk of the memory reclaim logic out of the arc_reclaim_thread and in to the evict driven shrinker callback. The Linux VM will call this function when it needs memory. The ARC is then responsible for attempting to free the requested amount of memory if possible. Several interfaces have been modified to accomidate this approach, however the basic user space implementation remains the same. The following changes almost exclusively just apply to the kernel implementation. * Removed the hdr_recl() reclaim callback which is redundant with the broader arc_shrinker_func(). * Reduced arc_grow_retry to 5 seconds from 60. This is now used internally in the ARC with arc_no_grow to indicate that direct reclaim was recently performed. This typically indicates a rapid change in memory demands which the kswapd threads were unable to keep ahead of. As long as direct reclaim is happening once every 5 seconds arc growth will be paused to avoid further contributing to the existing memory pressure. The more common indirect reclaim paths will not set arc_no_grow. * arc_shrink() has been extended to take the number of bytes by which arc_c should be reduced. This allows for a more granual reduction of the arc target. Since the kernel provides a reclaim value to the arc_shrinker_func() this value is used instead of 1<<arc_shrink_shift. * arc_reclaim_needed() has been removed. It was used to determine if the system was under memory pressure and relied extensively on Solaris specific VM interfaces. In most case the new code just checks arc_no_grow which indicates that within the last arc_grow_retry seconds direct memory reclaim occurred. * arc_memory_throttle() has been updated to always include the amount of evictable memory (arc and page cache) in its free space calculations. This space is largely available in most call paths due to direct memory reclaim. * The Solaris pageout code was also removed to avoid confusion. It has always been disabled due to proc_pageout being defined as NULL in the Linux port. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-13 21:29:16 +00:00
/* The arc is considered warm once reclaim has occurred */
if (unlikely(arc_warm == B_FALSE))
arc_warm = B_TRUE;
Add direct+indirect ARC reclaim Under OpenSolaris all memory reclaim is done asyncronously. Under Linux memory reclaim is done asynchronously _and_ synchronously. When a process allocates memory with GFP_KERNEL it explicitly allows the kernel to do reclaim on its behalf to satify the allocation. If that GFP_KERNEL allocation fails the kernel may take more drastic measures to reclaim the memory such as killing user space processes. This was observed to happen with ZFS because the ARC could consume a large fraction of the system memory but no synchronous reclaim could be performed on it. The result was GFP_KERNEL allocations could fail resulting in OOM events, and only moments latter the arc_reclaim thread would free unused memory from the ARC. This change leaves the arc_thread in place to manage the fundamental ARC behavior. But it adds a synchronous (direct) reclaim path for the ARC which can be called when memory is badly needed. It also adds an asynchronous (indirect) reclaim path which is called much more frequently to prune the ARC slab caches.
2011-03-30 01:08:59 +00:00
Integrate ARC more tightly with Linux Under Solaris the ARC was designed to stay one step ahead of the VM subsystem. It would attempt to recognize low memory situtions before they occured and evict data from the cache. It would also make assessments about if there was enough free memory to perform a specific operation. This was all possible because Solaris exposes a fairly decent view of the memory state of the system to other kernel threads. Linux on the other hand does not make this information easily available. To avoid extensive modifications to the ARC the SPL attempts to provide these same interfaces. While this works it is not ideal and problems can arise when the ARC and Linux have different ideas about when your out of memory. This has manifested itself in the past as a spinning arc_reclaim_thread. This patch abandons the emulated Solaris interfaces in favor of the prefered Linux interface. That means moving the bulk of the memory reclaim logic out of the arc_reclaim_thread and in to the evict driven shrinker callback. The Linux VM will call this function when it needs memory. The ARC is then responsible for attempting to free the requested amount of memory if possible. Several interfaces have been modified to accomidate this approach, however the basic user space implementation remains the same. The following changes almost exclusively just apply to the kernel implementation. * Removed the hdr_recl() reclaim callback which is redundant with the broader arc_shrinker_func(). * Reduced arc_grow_retry to 5 seconds from 60. This is now used internally in the ARC with arc_no_grow to indicate that direct reclaim was recently performed. This typically indicates a rapid change in memory demands which the kswapd threads were unable to keep ahead of. As long as direct reclaim is happening once every 5 seconds arc growth will be paused to avoid further contributing to the existing memory pressure. The more common indirect reclaim paths will not set arc_no_grow. * arc_shrink() has been extended to take the number of bytes by which arc_c should be reduced. This allows for a more granual reduction of the arc target. Since the kernel provides a reclaim value to the arc_shrinker_func() this value is used instead of 1<<arc_shrink_shift. * arc_reclaim_needed() has been removed. It was used to determine if the system was under memory pressure and relied extensively on Solaris specific VM interfaces. In most case the new code just checks arc_no_grow which indicates that within the last arc_grow_retry seconds direct memory reclaim occurred. * arc_memory_throttle() has been updated to always include the amount of evictable memory (arc and page cache) in its free space calculations. This space is largely available in most call paths due to direct memory reclaim. * The Solaris pageout code was also removed to avoid confusion. It has always been disabled due to proc_pageout being defined as NULL in the Linux port. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-13 21:29:16 +00:00
/* Return the potential number of reclaimable pages */
pages = btop(arc_evictable_memory());
if (sc->nr_to_scan == 0)
return (pages);
Fix 'negative objects to delete' warning Normally when the arc_shrinker_func() function is called the return value should be: >=0 - To indicate the number of freeable objects in the cache, or -1 - To indicate this cache should be skipped However, when the shrinker callback is called with 'nr_to_scan' equal to zero. The caller simply wants the number of freeable objects in the cache and we must never return -1. This patch reorders the first two conditionals in arc_shrinker_func() to ensure this behavior. This patch also now explictly casts arc_size and arc_c_min to signed int64_t types so MAX(x, 0) works as expected. As unsigned types we would never see an negative value which defeated the purpose of the MAX() lower bound and broke the shrinker logic. Finally, when nr_to_scan is non-zero we explictly prevent all reclaim below arc_c_min. This is done to prevent the Linux page cache from completely crowding out the ARC. This limit is tunable and some experimentation is likely going to be required to set it exactly right. For now we're sticking with the OpenSolaris defaults. Closes #218 Closes #243
2011-05-09 19:18:46 +00:00
/* Not allowed to perform filesystem reclaim */
Linux 3.0 compat, shrinker compatibility To accomindate the updated Linux 3.0 shrinker API the spl shrinker compatibility code was updated. Unfortunately, this couldn't be done cleanly without slightly adjusting the comapt API. See spl commit a55bcaad181096d764e12d847e3091cd7b15509a. This commit updates the ZFS code to use the slightly modified API. You must use the latest SPL if your building ZFS.
2011-06-21 21:26:51 +00:00
if (!(sc->gfp_mask & __GFP_FS))
Fix 'negative objects to delete' warning Normally when the arc_shrinker_func() function is called the return value should be: >=0 - To indicate the number of freeable objects in the cache, or -1 - To indicate this cache should be skipped However, when the shrinker callback is called with 'nr_to_scan' equal to zero. The caller simply wants the number of freeable objects in the cache and we must never return -1. This patch reorders the first two conditionals in arc_shrinker_func() to ensure this behavior. This patch also now explictly casts arc_size and arc_c_min to signed int64_t types so MAX(x, 0) works as expected. As unsigned types we would never see an negative value which defeated the purpose of the MAX() lower bound and broke the shrinker logic. Finally, when nr_to_scan is non-zero we explictly prevent all reclaim below arc_c_min. This is done to prevent the Linux page cache from completely crowding out the ARC. This limit is tunable and some experimentation is likely going to be required to set it exactly right. For now we're sticking with the OpenSolaris defaults. Closes #218 Closes #243
2011-05-09 19:18:46 +00:00
return (-1);
Add direct+indirect ARC reclaim Under OpenSolaris all memory reclaim is done asyncronously. Under Linux memory reclaim is done asynchronously _and_ synchronously. When a process allocates memory with GFP_KERNEL it explicitly allows the kernel to do reclaim on its behalf to satify the allocation. If that GFP_KERNEL allocation fails the kernel may take more drastic measures to reclaim the memory such as killing user space processes. This was observed to happen with ZFS because the ARC could consume a large fraction of the system memory but no synchronous reclaim could be performed on it. The result was GFP_KERNEL allocations could fail resulting in OOM events, and only moments latter the arc_reclaim thread would free unused memory from the ARC. This change leaves the arc_thread in place to manage the fundamental ARC behavior. But it adds a synchronous (direct) reclaim path for the ARC which can be called when memory is badly needed. It also adds an asynchronous (indirect) reclaim path which is called much more frequently to prune the ARC slab caches.
2011-03-30 01:08:59 +00:00
/* Reclaim in progress */
if (mutex_tryenter(&arc_reclaim_thr_lock) == 0)
return (-1);
Integrate ARC more tightly with Linux Under Solaris the ARC was designed to stay one step ahead of the VM subsystem. It would attempt to recognize low memory situtions before they occured and evict data from the cache. It would also make assessments about if there was enough free memory to perform a specific operation. This was all possible because Solaris exposes a fairly decent view of the memory state of the system to other kernel threads. Linux on the other hand does not make this information easily available. To avoid extensive modifications to the ARC the SPL attempts to provide these same interfaces. While this works it is not ideal and problems can arise when the ARC and Linux have different ideas about when your out of memory. This has manifested itself in the past as a spinning arc_reclaim_thread. This patch abandons the emulated Solaris interfaces in favor of the prefered Linux interface. That means moving the bulk of the memory reclaim logic out of the arc_reclaim_thread and in to the evict driven shrinker callback. The Linux VM will call this function when it needs memory. The ARC is then responsible for attempting to free the requested amount of memory if possible. Several interfaces have been modified to accomidate this approach, however the basic user space implementation remains the same. The following changes almost exclusively just apply to the kernel implementation. * Removed the hdr_recl() reclaim callback which is redundant with the broader arc_shrinker_func(). * Reduced arc_grow_retry to 5 seconds from 60. This is now used internally in the ARC with arc_no_grow to indicate that direct reclaim was recently performed. This typically indicates a rapid change in memory demands which the kswapd threads were unable to keep ahead of. As long as direct reclaim is happening once every 5 seconds arc growth will be paused to avoid further contributing to the existing memory pressure. The more common indirect reclaim paths will not set arc_no_grow. * arc_shrink() has been extended to take the number of bytes by which arc_c should be reduced. This allows for a more granual reduction of the arc target. Since the kernel provides a reclaim value to the arc_shrinker_func() this value is used instead of 1<<arc_shrink_shift. * arc_reclaim_needed() has been removed. It was used to determine if the system was under memory pressure and relied extensively on Solaris specific VM interfaces. In most case the new code just checks arc_no_grow which indicates that within the last arc_grow_retry seconds direct memory reclaim occurred. * arc_memory_throttle() has been updated to always include the amount of evictable memory (arc and page cache) in its free space calculations. This space is largely available in most call paths due to direct memory reclaim. * The Solaris pageout code was also removed to avoid confusion. It has always been disabled due to proc_pageout being defined as NULL in the Linux port. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-13 21:29:16 +00:00
/*
* Evict the requested number of pages by shrinking arc_c the
* requested amount. If there is nothing left to evict just
* reap whatever we can from the various arc slabs.
*/
if (pages > 0) {
arc_kmem_reap_now(ARC_RECLAIM_AGGR, ptob(sc->nr_to_scan));
pages = btop(arc_evictable_memory());
} else {
arc_kmem_reap_now(ARC_RECLAIM_CONS, ptob(sc->nr_to_scan));
pages = -1;
}
/*
* When direct reclaim is observed it usually indicates a rapid
* increase in memory pressure. This occurs because the kswapd
* threads were unable to asynchronously keep enough free memory
* available. In this case set arc_no_grow to briefly pause arc
* growth to avoid compounding the memory pressure.
*/
Add direct+indirect ARC reclaim Under OpenSolaris all memory reclaim is done asyncronously. Under Linux memory reclaim is done asynchronously _and_ synchronously. When a process allocates memory with GFP_KERNEL it explicitly allows the kernel to do reclaim on its behalf to satify the allocation. If that GFP_KERNEL allocation fails the kernel may take more drastic measures to reclaim the memory such as killing user space processes. This was observed to happen with ZFS because the ARC could consume a large fraction of the system memory but no synchronous reclaim could be performed on it. The result was GFP_KERNEL allocations could fail resulting in OOM events, and only moments latter the arc_reclaim thread would free unused memory from the ARC. This change leaves the arc_thread in place to manage the fundamental ARC behavior. But it adds a synchronous (direct) reclaim path for the ARC which can be called when memory is badly needed. It also adds an asynchronous (indirect) reclaim path which is called much more frequently to prune the ARC slab caches.
2011-03-30 01:08:59 +00:00
if (current_is_kswapd()) {
Integrate ARC more tightly with Linux Under Solaris the ARC was designed to stay one step ahead of the VM subsystem. It would attempt to recognize low memory situtions before they occured and evict data from the cache. It would also make assessments about if there was enough free memory to perform a specific operation. This was all possible because Solaris exposes a fairly decent view of the memory state of the system to other kernel threads. Linux on the other hand does not make this information easily available. To avoid extensive modifications to the ARC the SPL attempts to provide these same interfaces. While this works it is not ideal and problems can arise when the ARC and Linux have different ideas about when your out of memory. This has manifested itself in the past as a spinning arc_reclaim_thread. This patch abandons the emulated Solaris interfaces in favor of the prefered Linux interface. That means moving the bulk of the memory reclaim logic out of the arc_reclaim_thread and in to the evict driven shrinker callback. The Linux VM will call this function when it needs memory. The ARC is then responsible for attempting to free the requested amount of memory if possible. Several interfaces have been modified to accomidate this approach, however the basic user space implementation remains the same. The following changes almost exclusively just apply to the kernel implementation. * Removed the hdr_recl() reclaim callback which is redundant with the broader arc_shrinker_func(). * Reduced arc_grow_retry to 5 seconds from 60. This is now used internally in the ARC with arc_no_grow to indicate that direct reclaim was recently performed. This typically indicates a rapid change in memory demands which the kswapd threads were unable to keep ahead of. As long as direct reclaim is happening once every 5 seconds arc growth will be paused to avoid further contributing to the existing memory pressure. The more common indirect reclaim paths will not set arc_no_grow. * arc_shrink() has been extended to take the number of bytes by which arc_c should be reduced. This allows for a more granual reduction of the arc target. Since the kernel provides a reclaim value to the arc_shrinker_func() this value is used instead of 1<<arc_shrink_shift. * arc_reclaim_needed() has been removed. It was used to determine if the system was under memory pressure and relied extensively on Solaris specific VM interfaces. In most case the new code just checks arc_no_grow which indicates that within the last arc_grow_retry seconds direct memory reclaim occurred. * arc_memory_throttle() has been updated to always include the amount of evictable memory (arc and page cache) in its free space calculations. This space is largely available in most call paths due to direct memory reclaim. * The Solaris pageout code was also removed to avoid confusion. It has always been disabled due to proc_pageout being defined as NULL in the Linux port. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-13 21:29:16 +00:00
ARCSTAT_BUMP(arcstat_memory_indirect_count);
Add direct+indirect ARC reclaim Under OpenSolaris all memory reclaim is done asyncronously. Under Linux memory reclaim is done asynchronously _and_ synchronously. When a process allocates memory with GFP_KERNEL it explicitly allows the kernel to do reclaim on its behalf to satify the allocation. If that GFP_KERNEL allocation fails the kernel may take more drastic measures to reclaim the memory such as killing user space processes. This was observed to happen with ZFS because the ARC could consume a large fraction of the system memory but no synchronous reclaim could be performed on it. The result was GFP_KERNEL allocations could fail resulting in OOM events, and only moments latter the arc_reclaim thread would free unused memory from the ARC. This change leaves the arc_thread in place to manage the fundamental ARC behavior. But it adds a synchronous (direct) reclaim path for the ARC which can be called when memory is badly needed. It also adds an asynchronous (indirect) reclaim path which is called much more frequently to prune the ARC slab caches.
2011-03-30 01:08:59 +00:00
} else {
Integrate ARC more tightly with Linux Under Solaris the ARC was designed to stay one step ahead of the VM subsystem. It would attempt to recognize low memory situtions before they occured and evict data from the cache. It would also make assessments about if there was enough free memory to perform a specific operation. This was all possible because Solaris exposes a fairly decent view of the memory state of the system to other kernel threads. Linux on the other hand does not make this information easily available. To avoid extensive modifications to the ARC the SPL attempts to provide these same interfaces. While this works it is not ideal and problems can arise when the ARC and Linux have different ideas about when your out of memory. This has manifested itself in the past as a spinning arc_reclaim_thread. This patch abandons the emulated Solaris interfaces in favor of the prefered Linux interface. That means moving the bulk of the memory reclaim logic out of the arc_reclaim_thread and in to the evict driven shrinker callback. The Linux VM will call this function when it needs memory. The ARC is then responsible for attempting to free the requested amount of memory if possible. Several interfaces have been modified to accomidate this approach, however the basic user space implementation remains the same. The following changes almost exclusively just apply to the kernel implementation. * Removed the hdr_recl() reclaim callback which is redundant with the broader arc_shrinker_func(). * Reduced arc_grow_retry to 5 seconds from 60. This is now used internally in the ARC with arc_no_grow to indicate that direct reclaim was recently performed. This typically indicates a rapid change in memory demands which the kswapd threads were unable to keep ahead of. As long as direct reclaim is happening once every 5 seconds arc growth will be paused to avoid further contributing to the existing memory pressure. The more common indirect reclaim paths will not set arc_no_grow. * arc_shrink() has been extended to take the number of bytes by which arc_c should be reduced. This allows for a more granual reduction of the arc target. Since the kernel provides a reclaim value to the arc_shrinker_func() this value is used instead of 1<<arc_shrink_shift. * arc_reclaim_needed() has been removed. It was used to determine if the system was under memory pressure and relied extensively on Solaris specific VM interfaces. In most case the new code just checks arc_no_grow which indicates that within the last arc_grow_retry seconds direct memory reclaim occurred. * arc_memory_throttle() has been updated to always include the amount of evictable memory (arc and page cache) in its free space calculations. This space is largely available in most call paths due to direct memory reclaim. * The Solaris pageout code was also removed to avoid confusion. It has always been disabled due to proc_pageout being defined as NULL in the Linux port. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-13 21:29:16 +00:00
arc_no_grow = B_TRUE;
arc_grow_time = ddi_get_lbolt() + (arc_grow_retry * hz);
ARCSTAT_BUMP(arcstat_memory_direct_count);
Add direct+indirect ARC reclaim Under OpenSolaris all memory reclaim is done asyncronously. Under Linux memory reclaim is done asynchronously _and_ synchronously. When a process allocates memory with GFP_KERNEL it explicitly allows the kernel to do reclaim on its behalf to satify the allocation. If that GFP_KERNEL allocation fails the kernel may take more drastic measures to reclaim the memory such as killing user space processes. This was observed to happen with ZFS because the ARC could consume a large fraction of the system memory but no synchronous reclaim could be performed on it. The result was GFP_KERNEL allocations could fail resulting in OOM events, and only moments latter the arc_reclaim thread would free unused memory from the ARC. This change leaves the arc_thread in place to manage the fundamental ARC behavior. But it adds a synchronous (direct) reclaim path for the ARC which can be called when memory is badly needed. It also adds an asynchronous (indirect) reclaim path which is called much more frequently to prune the ARC slab caches.
2011-03-30 01:08:59 +00:00
}
mutex_exit(&arc_reclaim_thr_lock);
Integrate ARC more tightly with Linux Under Solaris the ARC was designed to stay one step ahead of the VM subsystem. It would attempt to recognize low memory situtions before they occured and evict data from the cache. It would also make assessments about if there was enough free memory to perform a specific operation. This was all possible because Solaris exposes a fairly decent view of the memory state of the system to other kernel threads. Linux on the other hand does not make this information easily available. To avoid extensive modifications to the ARC the SPL attempts to provide these same interfaces. While this works it is not ideal and problems can arise when the ARC and Linux have different ideas about when your out of memory. This has manifested itself in the past as a spinning arc_reclaim_thread. This patch abandons the emulated Solaris interfaces in favor of the prefered Linux interface. That means moving the bulk of the memory reclaim logic out of the arc_reclaim_thread and in to the evict driven shrinker callback. The Linux VM will call this function when it needs memory. The ARC is then responsible for attempting to free the requested amount of memory if possible. Several interfaces have been modified to accomidate this approach, however the basic user space implementation remains the same. The following changes almost exclusively just apply to the kernel implementation. * Removed the hdr_recl() reclaim callback which is redundant with the broader arc_shrinker_func(). * Reduced arc_grow_retry to 5 seconds from 60. This is now used internally in the ARC with arc_no_grow to indicate that direct reclaim was recently performed. This typically indicates a rapid change in memory demands which the kswapd threads were unable to keep ahead of. As long as direct reclaim is happening once every 5 seconds arc growth will be paused to avoid further contributing to the existing memory pressure. The more common indirect reclaim paths will not set arc_no_grow. * arc_shrink() has been extended to take the number of bytes by which arc_c should be reduced. This allows for a more granual reduction of the arc target. Since the kernel provides a reclaim value to the arc_shrinker_func() this value is used instead of 1<<arc_shrink_shift. * arc_reclaim_needed() has been removed. It was used to determine if the system was under memory pressure and relied extensively on Solaris specific VM interfaces. In most case the new code just checks arc_no_grow which indicates that within the last arc_grow_retry seconds direct memory reclaim occurred. * arc_memory_throttle() has been updated to always include the amount of evictable memory (arc and page cache) in its free space calculations. This space is largely available in most call paths due to direct memory reclaim. * The Solaris pageout code was also removed to avoid confusion. It has always been disabled due to proc_pageout being defined as NULL in the Linux port. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-13 21:29:16 +00:00
return (pages);
Add direct+indirect ARC reclaim Under OpenSolaris all memory reclaim is done asyncronously. Under Linux memory reclaim is done asynchronously _and_ synchronously. When a process allocates memory with GFP_KERNEL it explicitly allows the kernel to do reclaim on its behalf to satify the allocation. If that GFP_KERNEL allocation fails the kernel may take more drastic measures to reclaim the memory such as killing user space processes. This was observed to happen with ZFS because the ARC could consume a large fraction of the system memory but no synchronous reclaim could be performed on it. The result was GFP_KERNEL allocations could fail resulting in OOM events, and only moments latter the arc_reclaim thread would free unused memory from the ARC. This change leaves the arc_thread in place to manage the fundamental ARC behavior. But it adds a synchronous (direct) reclaim path for the ARC which can be called when memory is badly needed. It also adds an asynchronous (indirect) reclaim path which is called much more frequently to prune the ARC slab caches.
2011-03-30 01:08:59 +00:00
}
Linux 3.0 compat, shrinker compatibility To accomindate the updated Linux 3.0 shrinker API the spl shrinker compatibility code was updated. Unfortunately, this couldn't be done cleanly without slightly adjusting the comapt API. See spl commit a55bcaad181096d764e12d847e3091cd7b15509a. This commit updates the ZFS code to use the slightly modified API. You must use the latest SPL if your building ZFS.
2011-06-21 21:26:51 +00:00
SPL_SHRINKER_CALLBACK_WRAPPER(arc_shrinker_func);
Add direct+indirect ARC reclaim Under OpenSolaris all memory reclaim is done asyncronously. Under Linux memory reclaim is done asynchronously _and_ synchronously. When a process allocates memory with GFP_KERNEL it explicitly allows the kernel to do reclaim on its behalf to satify the allocation. If that GFP_KERNEL allocation fails the kernel may take more drastic measures to reclaim the memory such as killing user space processes. This was observed to happen with ZFS because the ARC could consume a large fraction of the system memory but no synchronous reclaim could be performed on it. The result was GFP_KERNEL allocations could fail resulting in OOM events, and only moments latter the arc_reclaim thread would free unused memory from the ARC. This change leaves the arc_thread in place to manage the fundamental ARC behavior. But it adds a synchronous (direct) reclaim path for the ARC which can be called when memory is badly needed. It also adds an asynchronous (indirect) reclaim path which is called much more frequently to prune the ARC slab caches.
2011-03-30 01:08:59 +00:00
SPL_SHRINKER_DECLARE(arc_shrinker, arc_shrinker_func, DEFAULT_SEEKS);
#endif /* _KERNEL */
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* Adapt arc info given the number of bytes we are trying to add and
* the state that we are comming from. This function is only called
* when we are adding new content to the cache.
*/
static void
arc_adapt(int bytes, arc_state_t *state)
{
int mult;
Rebase master to b108
2009-02-18 20:51:31 +00:00
uint64_t arc_p_min = (arc_c >> arc_p_min_shift);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
if (state == arc_l2c_only)
return;
ASSERT(bytes > 0);
/*
* Adapt the target size of the MRU list:
* - if we just hit in the MRU ghost list, then increase
* the target size of the MRU list.
* - if we just hit in the MFU ghost list, then increase
* the target size of the MFU list by decreasing the
* target size of the MRU list.
*/
if (state == arc_mru_ghost) {
mult = ((arc_mru_ghost->arcs_size >= arc_mfu_ghost->arcs_size) ?
1 : (arc_mfu_ghost->arcs_size/arc_mru_ghost->arcs_size));
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
mult = MIN(mult, 10); /* avoid wild arc_p adjustment */
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Rebase master to b108
2009-02-18 20:51:31 +00:00
arc_p = MIN(arc_c - arc_p_min, arc_p + bytes * mult);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
} else if (state == arc_mfu_ghost) {
Rebase master to b108
2009-02-18 20:51:31 +00:00
uint64_t delta;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
mult = ((arc_mfu_ghost->arcs_size >= arc_mru_ghost->arcs_size) ?
1 : (arc_mru_ghost->arcs_size/arc_mfu_ghost->arcs_size));
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
mult = MIN(mult, 10);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Rebase master to b108
2009-02-18 20:51:31 +00:00
delta = MIN(bytes * mult, arc_p);
arc_p = MAX(arc_p_min, arc_p - delta);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
ASSERT((int64_t)arc_p >= 0);
if (arc_no_grow)
return;
if (arc_c >= arc_c_max)
return;
/*
* If we're within (2 * maxblocksize) bytes of the target
* cache size, increment the target cache size
*/
if (arc_size > arc_c - (2ULL << SPA_MAXBLOCKSHIFT)) {
atomic_add_64(&arc_c, (int64_t)bytes);
if (arc_c > arc_c_max)
arc_c = arc_c_max;
else if (state == arc_anon)
atomic_add_64(&arc_p, (int64_t)bytes);
if (arc_p > arc_c)
arc_p = arc_c;
}
ASSERT((int64_t)arc_p >= 0);
}
/*
* Check if the cache has reached its limits and eviction is required
* prior to insert.
*/
static int
arc_evict_needed(arc_buf_contents_t type)
{
if (type == ARC_BUFC_METADATA && arc_meta_used >= arc_meta_limit)
return (1);
Integrate ARC more tightly with Linux Under Solaris the ARC was designed to stay one step ahead of the VM subsystem. It would attempt to recognize low memory situtions before they occured and evict data from the cache. It would also make assessments about if there was enough free memory to perform a specific operation. This was all possible because Solaris exposes a fairly decent view of the memory state of the system to other kernel threads. Linux on the other hand does not make this information easily available. To avoid extensive modifications to the ARC the SPL attempts to provide these same interfaces. While this works it is not ideal and problems can arise when the ARC and Linux have different ideas about when your out of memory. This has manifested itself in the past as a spinning arc_reclaim_thread. This patch abandons the emulated Solaris interfaces in favor of the prefered Linux interface. That means moving the bulk of the memory reclaim logic out of the arc_reclaim_thread and in to the evict driven shrinker callback. The Linux VM will call this function when it needs memory. The ARC is then responsible for attempting to free the requested amount of memory if possible. Several interfaces have been modified to accomidate this approach, however the basic user space implementation remains the same. The following changes almost exclusively just apply to the kernel implementation. * Removed the hdr_recl() reclaim callback which is redundant with the broader arc_shrinker_func(). * Reduced arc_grow_retry to 5 seconds from 60. This is now used internally in the ARC with arc_no_grow to indicate that direct reclaim was recently performed. This typically indicates a rapid change in memory demands which the kswapd threads were unable to keep ahead of. As long as direct reclaim is happening once every 5 seconds arc growth will be paused to avoid further contributing to the existing memory pressure. The more common indirect reclaim paths will not set arc_no_grow. * arc_shrink() has been extended to take the number of bytes by which arc_c should be reduced. This allows for a more granual reduction of the arc target. Since the kernel provides a reclaim value to the arc_shrinker_func() this value is used instead of 1<<arc_shrink_shift. * arc_reclaim_needed() has been removed. It was used to determine if the system was under memory pressure and relied extensively on Solaris specific VM interfaces. In most case the new code just checks arc_no_grow which indicates that within the last arc_grow_retry seconds direct memory reclaim occurred. * arc_memory_throttle() has been updated to always include the amount of evictable memory (arc and page cache) in its free space calculations. This space is largely available in most call paths due to direct memory reclaim. * The Solaris pageout code was also removed to avoid confusion. It has always been disabled due to proc_pageout being defined as NULL in the Linux port. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-13 21:29:16 +00:00
if (arc_no_grow)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
return (1);
return (arc_size > arc_c);
}
/*
* The buffer, supplied as the first argument, needs a data block.
* So, if we are at cache max, determine which cache should be victimized.
* We have the following cases:
*
* 1. Insert for MRU, p > sizeof(arc_anon + arc_mru) ->
* In this situation if we're out of space, but the resident size of the MFU is
* under the limit, victimize the MFU cache to satisfy this insertion request.
*
* 2. Insert for MRU, p <= sizeof(arc_anon + arc_mru) ->
* Here, we've used up all of the available space for the MRU, so we need to
* evict from our own cache instead. Evict from the set of resident MRU
* entries.
*
* 3. Insert for MFU (c - p) > sizeof(arc_mfu) ->
* c minus p represents the MFU space in the cache, since p is the size of the
* cache that is dedicated to the MRU. In this situation there's still space on
* the MFU side, so the MRU side needs to be victimized.
*
* 4. Insert for MFU (c - p) < sizeof(arc_mfu) ->
* MFU's resident set is consuming more space than it has been allotted. In
* this situation, we must victimize our own cache, the MFU, for this insertion.
*/
static void
arc_get_data_buf(arc_buf_t *buf)
{
arc_state_t *state = buf->b_hdr->b_state;
uint64_t size = buf->b_hdr->b_size;
arc_buf_contents_t type = buf->b_hdr->b_type;
arc_adapt(size, state);
/*
* We have not yet reached cache maximum size,
* just allocate a new buffer.
*/
if (!arc_evict_needed(type)) {
if (type == ARC_BUFC_METADATA) {
buf->b_data = zio_buf_alloc(size);
Rebase master to b108
2009-02-18 20:51:31 +00:00
arc_space_consume(size, ARC_SPACE_DATA);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
} else {
ASSERT(type == ARC_BUFC_DATA);
buf->b_data = zio_data_buf_alloc(size);
Rebase master to b108
2009-02-18 20:51:31 +00:00
ARCSTAT_INCR(arcstat_data_size, size);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
atomic_add_64(&arc_size, size);
}
goto out;
}
/*
* If we are prefetching from the mfu ghost list, this buffer
* will end up on the mru list; so steal space from there.
*/
if (state == arc_mfu_ghost)
state = buf->b_hdr->b_flags & ARC_PREFETCH ? arc_mru : arc_mfu;
else if (state == arc_mru_ghost)
state = arc_mru;
if (state == arc_mru || state == arc_anon) {
uint64_t mru_used = arc_anon->arcs_size + arc_mru->arcs_size;
Rebase master to b108
2009-02-18 20:51:31 +00:00
state = (arc_mfu->arcs_lsize[type] >= size &&
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
arc_p > mru_used) ? arc_mfu : arc_mru;
} else {
/* MFU cases */
uint64_t mfu_space = arc_c - arc_p;
Rebase master to b108
2009-02-18 20:51:31 +00:00
state = (arc_mru->arcs_lsize[type] >= size &&
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
mfu_space > arc_mfu->arcs_size) ? arc_mru : arc_mfu;
}
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
Fix gcc cast warnings Gcc -Wall warn: 'lacks a cast' Gcc -Wall warn: 'comparison between pointer and integer' Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 16:52:39 +00:00
if ((buf->b_data = arc_evict(state, 0, size, TRUE, type)) == NULL) {
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
if (type == ARC_BUFC_METADATA) {
buf->b_data = zio_buf_alloc(size);
Rebase master to b108
2009-02-18 20:51:31 +00:00
arc_space_consume(size, ARC_SPACE_DATA);
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
/*
* If we are unable to recycle an existing meta buffer
* signal the reclaim thread. It will notify users
* via the prune callback to drop references. The
* prune callback in run in the context of the reclaim
* thread to avoid deadlocking on the hash_lock.
*/
cv_signal(&arc_reclaim_thr_cv);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
} else {
ASSERT(type == ARC_BUFC_DATA);
buf->b_data = zio_data_buf_alloc(size);
Rebase master to b108
2009-02-18 20:51:31 +00:00
ARCSTAT_INCR(arcstat_data_size, size);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
atomic_add_64(&arc_size, size);
}
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ARCSTAT_BUMP(arcstat_recycle_miss);
}
ASSERT(buf->b_data != NULL);
out:
/*
* Update the state size. Note that ghost states have a
* "ghost size" and so don't need to be updated.
*/
if (!GHOST_STATE(buf->b_hdr->b_state)) {
arc_buf_hdr_t *hdr = buf->b_hdr;
atomic_add_64(&hdr->b_state->arcs_size, size);
if (list_link_active(&hdr->b_arc_node)) {
ASSERT(refcount_is_zero(&hdr->b_refcnt));
atomic_add_64(&hdr->b_state->arcs_lsize[type], size);
}
/*
* If we are growing the cache, and we are adding anonymous
* data, and we have outgrown arc_p, update arc_p
*/
if (arc_size < arc_c && hdr->b_state == arc_anon &&
arc_anon->arcs_size + arc_mru->arcs_size > arc_p)
arc_p = MIN(arc_c, arc_p + size);
}
}
/*
* This routine is called whenever a buffer is accessed.
* NOTE: the hash lock is dropped in this function.
*/
static void
arc_access(arc_buf_hdr_t *buf, kmutex_t *hash_lock)
{
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
clock_t now;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ASSERT(MUTEX_HELD(hash_lock));
if (buf->b_state == arc_anon) {
/*
* This buffer is not in the cache, and does not
* appear in our "ghost" list. Add the new buffer
* to the MRU state.
*/
ASSERT(buf->b_arc_access == 0);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
buf->b_arc_access = ddi_get_lbolt();
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
DTRACE_PROBE1(new_state__mru, arc_buf_hdr_t *, buf);
arc_change_state(arc_mru, buf, hash_lock);
} else if (buf->b_state == arc_mru) {
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
now = ddi_get_lbolt();
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* If this buffer is here because of a prefetch, then either:
* - clear the flag if this is a "referencing" read
* (any subsequent access will bump this into the MFU state).
* or
* - move the buffer to the head of the list if this is
* another prefetch (to make it less likely to be evicted).
*/
if ((buf->b_flags & ARC_PREFETCH) != 0) {
if (refcount_count(&buf->b_refcnt) == 0) {
ASSERT(list_link_active(&buf->b_arc_node));
} else {
buf->b_flags &= ~ARC_PREFETCH;
ARCSTAT_BUMP(arcstat_mru_hits);
}
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
buf->b_arc_access = now;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
return;
}
/*
* This buffer has been "accessed" only once so far,
* but it is still in the cache. Move it to the MFU
* state.
*/
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (now > buf->b_arc_access + ARC_MINTIME) {
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* More than 125ms have passed since we
* instantiated this buffer. Move it to the
* most frequently used state.
*/
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
buf->b_arc_access = now;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
DTRACE_PROBE1(new_state__mfu, arc_buf_hdr_t *, buf);
arc_change_state(arc_mfu, buf, hash_lock);
}
ARCSTAT_BUMP(arcstat_mru_hits);
} else if (buf->b_state == arc_mru_ghost) {
arc_state_t *new_state;
/*
* This buffer has been "accessed" recently, but
* was evicted from the cache. Move it to the
* MFU state.
*/
if (buf->b_flags & ARC_PREFETCH) {
new_state = arc_mru;
if (refcount_count(&buf->b_refcnt) > 0)
buf->b_flags &= ~ARC_PREFETCH;
DTRACE_PROBE1(new_state__mru, arc_buf_hdr_t *, buf);
} else {
new_state = arc_mfu;
DTRACE_PROBE1(new_state__mfu, arc_buf_hdr_t *, buf);
}
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
buf->b_arc_access = ddi_get_lbolt();
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
arc_change_state(new_state, buf, hash_lock);
ARCSTAT_BUMP(arcstat_mru_ghost_hits);
} else if (buf->b_state == arc_mfu) {
/*
* This buffer has been accessed more than once and is
* still in the cache. Keep it in the MFU state.
*
* NOTE: an add_reference() that occurred when we did
* the arc_read() will have kicked this off the list.
* If it was a prefetch, we will explicitly move it to
* the head of the list now.
*/
if ((buf->b_flags & ARC_PREFETCH) != 0) {
ASSERT(refcount_count(&buf->b_refcnt) == 0);
ASSERT(list_link_active(&buf->b_arc_node));
}
ARCSTAT_BUMP(arcstat_mfu_hits);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
buf->b_arc_access = ddi_get_lbolt();
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
} else if (buf->b_state == arc_mfu_ghost) {
arc_state_t *new_state = arc_mfu;
/*
* This buffer has been accessed more than once but has
* been evicted from the cache. Move it back to the
* MFU state.
*/
if (buf->b_flags & ARC_PREFETCH) {
/*
* This is a prefetch access...
* move this block back to the MRU state.
*/
ASSERT3U(refcount_count(&buf->b_refcnt), ==, 0);
new_state = arc_mru;
}
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
buf->b_arc_access = ddi_get_lbolt();
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
DTRACE_PROBE1(new_state__mfu, arc_buf_hdr_t *, buf);
arc_change_state(new_state, buf, hash_lock);
ARCSTAT_BUMP(arcstat_mfu_ghost_hits);
} else if (buf->b_state == arc_l2c_only) {
/*
* This buffer is on the 2nd Level ARC.
*/
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
buf->b_arc_access = ddi_get_lbolt();
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
DTRACE_PROBE1(new_state__mfu, arc_buf_hdr_t *, buf);
arc_change_state(arc_mfu, buf, hash_lock);
} else {
ASSERT(!"invalid arc state");
}
}
/* a generic arc_done_func_t which you can use */
/* ARGSUSED */
void
arc_bcopy_func(zio_t *zio, arc_buf_t *buf, void *arg)
{
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (zio == NULL || zio->io_error == 0)
bcopy(buf->b_data, arg, buf->b_hdr->b_size);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
VERIFY(arc_buf_remove_ref(buf, arg) == 1);
}
/* a generic arc_done_func_t */
void
arc_getbuf_func(zio_t *zio, arc_buf_t *buf, void *arg)
{
arc_buf_t **bufp = arg;
if (zio && zio->io_error) {
VERIFY(arc_buf_remove_ref(buf, arg) == 1);
*bufp = NULL;
} else {
*bufp = buf;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
ASSERT(buf->b_data);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
}
static void
arc_read_done(zio_t *zio)
{
arc_buf_hdr_t *hdr, *found;
arc_buf_t *buf;
arc_buf_t *abuf; /* buffer we're assigning to callback */
kmutex_t *hash_lock;
arc_callback_t *callback_list, *acb;
int freeable = FALSE;
buf = zio->io_private;
hdr = buf->b_hdr;
/*
* The hdr was inserted into hash-table and removed from lists
* prior to starting I/O. We should find this header, since
* it's in the hash table, and it should be legit since it's
* not possible to evict it during the I/O. The only possible
* reason for it not to be found is if we were freed during the
* read.
*/
Rebase master to b108
2009-02-18 20:51:31 +00:00
found = buf_hash_find(hdr->b_spa, &hdr->b_dva, hdr->b_birth,
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
&hash_lock);
ASSERT((found == NULL && HDR_FREED_IN_READ(hdr) && hash_lock == NULL) ||
(found == hdr && DVA_EQUAL(&hdr->b_dva, BP_IDENTITY(zio->io_bp))) ||
(found == hdr && HDR_L2_READING(hdr)));
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
hdr->b_flags &= ~ARC_L2_EVICTED;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
if (l2arc_noprefetch && (hdr->b_flags & ARC_PREFETCH))
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
hdr->b_flags &= ~ARC_L2CACHE;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/* byteswap if necessary */
callback_list = hdr->b_acb;
ASSERT(callback_list != NULL);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (BP_SHOULD_BYTESWAP(zio->io_bp) && zio->io_error == 0) {
Illumos #2619 and #2747 2619 asynchronous destruction of ZFS file systems 2747 SPA versioning with zfs feature flags Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@delphix.com> Reviewed by: Richard Lowe <richlowe@richlowe.net> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: illumos/illumos-gate@53089ab7c84db6fb76c16ca50076c147cda11757 illumos/illumos-gate@ad135b5d644628e791c3188a6ecbd9c257961ef8 illumos changeset: 13700:2889e2596bd6 https://www.illumos.org/issues/2619 https://www.illumos.org/issues/2747 NOTE: The grub specific changes were not ported. This change must be made to the Linux grub packages. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-13 23:24:15 +00:00
dmu_object_byteswap_t bswap =
DMU_OT_BYTESWAP(BP_GET_TYPE(zio->io_bp));
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
arc_byteswap_func_t *func = BP_GET_LEVEL(zio->io_bp) > 0 ?
byteswap_uint64_array :
Illumos #2619 and #2747 2619 asynchronous destruction of ZFS file systems 2747 SPA versioning with zfs feature flags Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@delphix.com> Reviewed by: Richard Lowe <richlowe@richlowe.net> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: illumos/illumos-gate@53089ab7c84db6fb76c16ca50076c147cda11757 illumos/illumos-gate@ad135b5d644628e791c3188a6ecbd9c257961ef8 illumos changeset: 13700:2889e2596bd6 https://www.illumos.org/issues/2619 https://www.illumos.org/issues/2747 NOTE: The grub specific changes were not ported. This change must be made to the Linux grub packages. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-13 23:24:15 +00:00
dmu_ot_byteswap[bswap].ob_func;
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
func(buf->b_data, hdr->b_size);
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
arc_cksum_compute(buf, B_FALSE);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (hash_lock && zio->io_error == 0 && hdr->b_state == arc_anon) {
/*
* Only call arc_access on anonymous buffers. This is because
* if we've issued an I/O for an evicted buffer, we've already
* called arc_access (to prevent any simultaneous readers from
* getting confused).
*/
arc_access(hdr, hash_lock);
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/* create copies of the data buffer for the callers */
abuf = buf;
for (acb = callback_list; acb; acb = acb->acb_next) {
if (acb->acb_done) {
Illumos #3145, #3212 3145 single-copy arc 3212 ztest: race condition between vdev_online() and spa_vdev_remove() Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Eric Schrock <eric.schrock@delphix.com> Reviewed by: Justin T. Gibbs <gibbs@scsiguy.com> Approved by: Eric Schrock <eric.schrock@delphix.com> References: illumos-gate/commit/9253d63df408bb48584e0b1abfcc24ef2472382e illumos changeset: 13840:97fd5cdf328a https://www.illumos.org/issues/3145 https://www.illumos.org/issues/3212 Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #989 Closes #1137
2012-12-21 22:57:09 +00:00
if (abuf == NULL) {
ARCSTAT_BUMP(arcstat_duplicate_reads);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
abuf = arc_buf_clone(buf);
Illumos #3145, #3212 3145 single-copy arc 3212 ztest: race condition between vdev_online() and spa_vdev_remove() Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Eric Schrock <eric.schrock@delphix.com> Reviewed by: Justin T. Gibbs <gibbs@scsiguy.com> Approved by: Eric Schrock <eric.schrock@delphix.com> References: illumos-gate/commit/9253d63df408bb48584e0b1abfcc24ef2472382e illumos changeset: 13840:97fd5cdf328a https://www.illumos.org/issues/3145 https://www.illumos.org/issues/3212 Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #989 Closes #1137
2012-12-21 22:57:09 +00:00
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
acb->acb_buf = abuf;
abuf = NULL;
}
}
hdr->b_acb = NULL;
hdr->b_flags &= ~ARC_IO_IN_PROGRESS;
ASSERT(!HDR_BUF_AVAILABLE(hdr));
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (abuf == buf) {
ASSERT(buf->b_efunc == NULL);
ASSERT(hdr->b_datacnt == 1);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
hdr->b_flags |= ARC_BUF_AVAILABLE;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ASSERT(refcount_is_zero(&hdr->b_refcnt) || callback_list != NULL);
if (zio->io_error != 0) {
hdr->b_flags |= ARC_IO_ERROR;
if (hdr->b_state != arc_anon)
arc_change_state(arc_anon, hdr, hash_lock);
if (HDR_IN_HASH_TABLE(hdr))
buf_hash_remove(hdr);
freeable = refcount_is_zero(&hdr->b_refcnt);
}
/*
* Broadcast before we drop the hash_lock to avoid the possibility
* that the hdr (and hence the cv) might be freed before we get to
* the cv_broadcast().
*/
cv_broadcast(&hdr->b_cv);
if (hash_lock) {
mutex_exit(hash_lock);
} else {
/*
* This block was freed while we waited for the read to
* complete. It has been removed from the hash table and
* moved to the anonymous state (so that it won't show up
* in the cache).
*/
ASSERT3P(hdr->b_state, ==, arc_anon);
freeable = refcount_is_zero(&hdr->b_refcnt);
}
/* execute each callback and free its structure */
while ((acb = callback_list) != NULL) {
if (acb->acb_done)
acb->acb_done(zio, acb->acb_buf, acb->acb_private);
if (acb->acb_zio_dummy != NULL) {
acb->acb_zio_dummy->io_error = zio->io_error;
zio_nowait(acb->acb_zio_dummy);
}
callback_list = acb->acb_next;
kmem_free(acb, sizeof (arc_callback_t));
}
if (freeable)
arc_hdr_destroy(hdr);
}
/*
Illumos #2618 arc.c mistypes in the comments 2618 arc.c mistypes in the comments Reviewed by: Jason King <jason.brian.king@gmail.com> Reviewed by: Josef Sipek <jeffpc@josefsipek.net> Approved by: Richard Lowe <richlowe@richlowe.net> References: illumos/illumos-gate@fc98fea58e89224f6f13d7fae246d6cb5dfa35ea illumos changeset: 13721:5b51a16a186f https://www.illumos.org/issues/2618 Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-01-11 16:54:18 +00:00
* "Read" the block at the specified DVA (in bp) via the
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
* cache. If the block is found in the cache, invoke the provided
* callback immediately and return. Note that the `zio' parameter
* in the callback will be NULL in this case, since no IO was
* required. If the block is not in the cache pass the read request
* on to the spa with a substitute callback function, so that the
* requested block will be added to the cache.
*
* If a read request arrives for a block that has a read in-progress,
* either wait for the in-progress read to complete (and return the
* results); or, if this is a read with a "done" func, add a record
* to the read to invoke the "done" func when the read completes,
* and return; or just return.
*
* arc_read_done() will invoke all the requested "done" functions
* for readers of this block.
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
*
* Normal callers should use arc_read and pass the arc buffer and offset
* for the bp. But if you know you don't need locking, you can use
* arc_read_bp.
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
*/
int
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
arc_read(zio_t *pio, spa_t *spa, const blkptr_t *bp, arc_buf_t *pbuf,
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
arc_done_func_t *done, void *private, int priority, int zio_flags,
uint32_t *arc_flags, const zbookmark_t *zb)
{
int err;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (pbuf == NULL) {
/*
* XXX This happens from traverse callback funcs, for
* the objset_phys_t block.
*/
return (arc_read_nolock(pio, spa, bp, done, private, priority,
zio_flags, arc_flags, zb));
}
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
ASSERT(!refcount_is_zero(&pbuf->b_hdr->b_refcnt));
ASSERT3U((char *)bp - (char *)pbuf->b_data, <, pbuf->b_hdr->b_size);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
rw_enter(&pbuf->b_data_lock, RW_READER);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
err = arc_read_nolock(pio, spa, bp, done, private, priority,
zio_flags, arc_flags, zb);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
rw_exit(&pbuf->b_data_lock);
Rebase master to b117
2009-07-02 22:44:48 +00:00
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
return (err);
}
int
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
arc_read_nolock(zio_t *pio, spa_t *spa, const blkptr_t *bp,
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
arc_done_func_t *done, void *private, int priority, int zio_flags,
uint32_t *arc_flags, const zbookmark_t *zb)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
{
arc_buf_hdr_t *hdr;
Fix gcc uninitialized variable warnings Gcc -Wall warn: 'uninitialized variable' Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 16:58:04 +00:00
arc_buf_t *buf = NULL;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
kmutex_t *hash_lock;
zio_t *rzio;
Illumos #1748: desire support for reguid in zfs Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com> Reviewed by: Alexander Eremin <alexander.eremin@nexenta.com> Reviewed by: Alexander Stetsenko <ams@nexenta.com> Approved by: Richard Lowe <richlowe@richlowe.net> References: https://www.illumos.org/issues/1748 This commit modifies the user to kernel space ioctl ABI. Extra care should be taken when updating to ensure both the kernel modules and utilities are updated. If only the user space component is updated both the 'zpool events' command and the 'zpool reguid' command will not work until the kernel modules are updated. Ported by: Martin Matuska <martin@matuska.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #665
2011-11-11 22:07:54 +00:00
uint64_t guid = spa_load_guid(spa);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
top:
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
hdr = buf_hash_find(guid, BP_IDENTITY(bp), BP_PHYSICAL_BIRTH(bp),
&hash_lock);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
if (hdr && hdr->b_datacnt > 0) {
*arc_flags |= ARC_CACHED;
if (HDR_IO_IN_PROGRESS(hdr)) {
if (*arc_flags & ARC_WAIT) {
cv_wait(&hdr->b_cv, hash_lock);
mutex_exit(hash_lock);
goto top;
}
ASSERT(*arc_flags & ARC_NOWAIT);
if (done) {
arc_callback_t *acb = NULL;
acb = kmem_zalloc(sizeof (arc_callback_t),
Use KM_PUSHPAGE instead of KM_SLEEP It used to be the case that all KM_SLEEP allocations were GFS_NOFS. Unfortunately this often resulted in the kernel being unable to reclaim the ARC, inode, and dentry caches in a timely manor. The fix was to make KM_SLEEP a GFP_KERNEL allocation in the SPL. However, this increases the posibility of deadlocking the system on a zfs write thread. If a zfs write thread attempts to perform an allocation it may trigger synchronous reclaim. This reclaim may attempt to flush dirty data/inode to disk to free memory. Unforunately, this write cannot finish because the write thread which would handle it is holding the previous transaction open. Deadlock. To avoid this all allocations in the zfs write thread path must use KM_PUSHPAGE which prohibits synchronous reclaim for that thread. In this way forward progress in ensured. The risk with this change is I missed updating an allocation for the write threads leaving an increased posibility of deadlock. If any deadlocks remain they will be unlikely but we'll have to make sure they all get fixed.
2011-03-19 21:34:30 +00:00
KM_PUSHPAGE);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
acb->acb_done = done;
acb->acb_private = private;
if (pio != NULL)
acb->acb_zio_dummy = zio_null(pio,
Rebase master to b108
2009-02-18 20:51:31 +00:00
spa, NULL, NULL, NULL, zio_flags);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ASSERT(acb->acb_done != NULL);
acb->acb_next = hdr->b_acb;
hdr->b_acb = acb;
add_reference(hdr, hash_lock, private);
mutex_exit(hash_lock);
return (0);
}
mutex_exit(hash_lock);
return (0);
}
ASSERT(hdr->b_state == arc_mru || hdr->b_state == arc_mfu);
if (done) {
add_reference(hdr, hash_lock, private);
/*
* If this block is already in use, create a new
* copy of the data so that we will be guaranteed
* that arc_release() will always succeed.
*/
buf = hdr->b_buf;
ASSERT(buf);
ASSERT(buf->b_data);
if (HDR_BUF_AVAILABLE(hdr)) {
ASSERT(buf->b_efunc == NULL);
hdr->b_flags &= ~ARC_BUF_AVAILABLE;
} else {
buf = arc_buf_clone(buf);
}
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
} else if (*arc_flags & ARC_PREFETCH &&
refcount_count(&hdr->b_refcnt) == 0) {
hdr->b_flags |= ARC_PREFETCH;
}
DTRACE_PROBE1(arc__hit, arc_buf_hdr_t *, hdr);
arc_access(hdr, hash_lock);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
if (*arc_flags & ARC_L2CACHE)
hdr->b_flags |= ARC_L2CACHE;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
mutex_exit(hash_lock);
ARCSTAT_BUMP(arcstat_hits);
ARCSTAT_CONDSTAT(!(hdr->b_flags & ARC_PREFETCH),
demand, prefetch, hdr->b_type != ARC_BUFC_METADATA,
data, metadata, hits);
if (done)
done(NULL, buf, private);
} else {
uint64_t size = BP_GET_LSIZE(bp);
arc_callback_t *acb;
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
vdev_t *vd = NULL;
Fix for access beyond end of device error This commit fixes a sign extension bug affecting l2arc devices. Extremely large offsets may be passed down to the low level block device driver on reads, generating errors similar to attempt to access beyond end of device sdbi1: rw=14, want=36028797014862705, limit=125026959 The unwanted sign extension occurrs because the function arc_read_nolock() stores the offset as a daddr_t, a 32-bit signed int type in the Linux kernel. This offset is then passed to zio_read_phys() as a uint64_t argument, causing sign extension for values of 0x80000000 or greater. To avoid this, we store the offset in a uint64_t. This change also changes a few daddr_t struct members to uint64_t in the libspl headers to avoid similar bugs cropping up in the future. We also add an ASSERT to __vdev_disk_physio() to check for invalid offsets. Closes #66 Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-11-10 21:36:18 +00:00
uint64_t addr = -1;
Rebase master to b108
2009-02-18 20:51:31 +00:00
boolean_t devw = B_FALSE;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
if (hdr == NULL) {
/* this block is not in the cache */
arc_buf_hdr_t *exists;
arc_buf_contents_t type = BP_GET_BUFC_TYPE(bp);
buf = arc_buf_alloc(spa, size, private, type);
hdr = buf->b_hdr;
hdr->b_dva = *BP_IDENTITY(bp);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
hdr->b_birth = BP_PHYSICAL_BIRTH(bp);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
hdr->b_cksum0 = bp->blk_cksum.zc_word[0];
exists = buf_hash_insert(hdr, &hash_lock);
if (exists) {
/* somebody beat us to the hash insert */
mutex_exit(hash_lock);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
buf_discard_identity(hdr);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
(void) arc_buf_remove_ref(buf, private);
goto top; /* restart the IO request */
}
/* if this is a prefetch, we don't have a reference */
if (*arc_flags & ARC_PREFETCH) {
(void) remove_reference(hdr, hash_lock,
private);
hdr->b_flags |= ARC_PREFETCH;
}
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
if (*arc_flags & ARC_L2CACHE)
hdr->b_flags |= ARC_L2CACHE;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
if (BP_GET_LEVEL(bp) > 0)
hdr->b_flags |= ARC_INDIRECT;
} else {
/* this block is in the ghost cache */
ASSERT(GHOST_STATE(hdr->b_state));
ASSERT(!HDR_IO_IN_PROGRESS(hdr));
ASSERT3U(refcount_count(&hdr->b_refcnt), ==, 0);
ASSERT(hdr->b_buf == NULL);
/* if this is a prefetch, we don't have a reference */
if (*arc_flags & ARC_PREFETCH)
hdr->b_flags |= ARC_PREFETCH;
else
add_reference(hdr, hash_lock, private);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
if (*arc_flags & ARC_L2CACHE)
hdr->b_flags |= ARC_L2CACHE;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
buf = kmem_cache_alloc(buf_cache, KM_PUSHPAGE);
buf->b_hdr = hdr;
buf->b_data = NULL;
buf->b_efunc = NULL;
buf->b_private = NULL;
buf->b_next = NULL;
hdr->b_buf = buf;
ASSERT(hdr->b_datacnt == 0);
hdr->b_datacnt = 1;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
arc_get_data_buf(buf);
arc_access(hdr, hash_lock);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
ASSERT(!GHOST_STATE(hdr->b_state));
Use KM_PUSHPAGE instead of KM_SLEEP It used to be the case that all KM_SLEEP allocations were GFS_NOFS. Unfortunately this often resulted in the kernel being unable to reclaim the ARC, inode, and dentry caches in a timely manor. The fix was to make KM_SLEEP a GFP_KERNEL allocation in the SPL. However, this increases the posibility of deadlocking the system on a zfs write thread. If a zfs write thread attempts to perform an allocation it may trigger synchronous reclaim. This reclaim may attempt to flush dirty data/inode to disk to free memory. Unforunately, this write cannot finish because the write thread which would handle it is holding the previous transaction open. Deadlock. To avoid this all allocations in the zfs write thread path must use KM_PUSHPAGE which prohibits synchronous reclaim for that thread. In this way forward progress in ensured. The risk with this change is I missed updating an allocation for the write threads leaving an increased posibility of deadlock. If any deadlocks remain they will be unlikely but we'll have to make sure they all get fixed.
2011-03-19 21:34:30 +00:00
acb = kmem_zalloc(sizeof (arc_callback_t), KM_PUSHPAGE);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
acb->acb_done = done;
acb->acb_private = private;
ASSERT(hdr->b_acb == NULL);
hdr->b_acb = acb;
hdr->b_flags |= ARC_IO_IN_PROGRESS;
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
if (HDR_L2CACHE(hdr) && hdr->b_l2hdr != NULL &&
(vd = hdr->b_l2hdr->b_dev->l2ad_vdev) != NULL) {
Rebase master to b108
2009-02-18 20:51:31 +00:00
devw = hdr->b_l2hdr->b_dev->l2ad_writing;
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
addr = hdr->b_l2hdr->b_daddr;
/*
* Lock out device removal.
*/
if (vdev_is_dead(vd) ||
!spa_config_tryenter(spa, SCL_L2ARC, vd, RW_READER))
vd = NULL;
}
mutex_exit(hash_lock);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ASSERT3U(hdr->b_size, ==, size);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
DTRACE_PROBE4(arc__miss, arc_buf_hdr_t *, hdr, blkptr_t *, bp,
uint64_t, size, zbookmark_t *, zb);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ARCSTAT_BUMP(arcstat_misses);
ARCSTAT_CONDSTAT(!(hdr->b_flags & ARC_PREFETCH),
demand, prefetch, hdr->b_type != ARC_BUFC_METADATA,
data, metadata, misses);
Rebase master to b108
2009-02-18 20:51:31 +00:00
if (vd != NULL && l2arc_ndev != 0 && !(l2arc_norw && devw)) {
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* Read from the L2ARC if the following are true:
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
* 1. The L2ARC vdev was previously cached.
* 2. This buffer still has L2ARC metadata.
* 3. This buffer isn't currently writing to the L2ARC.
* 4. The L2ARC entry wasn't evicted, which may
* also have invalidated the vdev.
Rebase master to b108
2009-02-18 20:51:31 +00:00
* 5. This isn't prefetch and l2arc_noprefetch is set.
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
*/
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
if (hdr->b_l2hdr != NULL &&
Rebase master to b108
2009-02-18 20:51:31 +00:00
!HDR_L2_WRITING(hdr) && !HDR_L2_EVICTED(hdr) &&
!(l2arc_noprefetch && HDR_PREFETCH(hdr))) {
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
l2arc_read_callback_t *cb;
DTRACE_PROBE1(l2arc__hit, arc_buf_hdr_t *, hdr);
ARCSTAT_BUMP(arcstat_l2_hits);
cb = kmem_zalloc(sizeof (l2arc_read_callback_t),
Use KM_PUSHPAGE instead of KM_SLEEP It used to be the case that all KM_SLEEP allocations were GFS_NOFS. Unfortunately this often resulted in the kernel being unable to reclaim the ARC, inode, and dentry caches in a timely manor. The fix was to make KM_SLEEP a GFP_KERNEL allocation in the SPL. However, this increases the posibility of deadlocking the system on a zfs write thread. If a zfs write thread attempts to perform an allocation it may trigger synchronous reclaim. This reclaim may attempt to flush dirty data/inode to disk to free memory. Unforunately, this write cannot finish because the write thread which would handle it is holding the previous transaction open. Deadlock. To avoid this all allocations in the zfs write thread path must use KM_PUSHPAGE which prohibits synchronous reclaim for that thread. In this way forward progress in ensured. The risk with this change is I missed updating an allocation for the write threads leaving an increased posibility of deadlock. If any deadlocks remain they will be unlikely but we'll have to make sure they all get fixed.
2011-03-19 21:34:30 +00:00
KM_PUSHPAGE);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
cb->l2rcb_buf = buf;
cb->l2rcb_spa = spa;
cb->l2rcb_bp = *bp;
cb->l2rcb_zb = *zb;
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
cb->l2rcb_flags = zio_flags;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
* l2arc read. The SCL_L2ARC lock will be
* released by l2arc_read_done().
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
*/
rzio = zio_read_phys(pio, vd, addr, size,
buf->b_data, ZIO_CHECKSUM_OFF,
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
l2arc_read_done, cb, priority, zio_flags |
ZIO_FLAG_DONT_CACHE | ZIO_FLAG_CANFAIL |
ZIO_FLAG_DONT_PROPAGATE |
ZIO_FLAG_DONT_RETRY, B_FALSE);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
DTRACE_PROBE2(l2arc__read, vdev_t *, vd,
zio_t *, rzio);
Rebase master to b108
2009-02-18 20:51:31 +00:00
ARCSTAT_INCR(arcstat_l2_read_bytes, size);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
if (*arc_flags & ARC_NOWAIT) {
zio_nowait(rzio);
return (0);
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
ASSERT(*arc_flags & ARC_WAIT);
if (zio_wait(rzio) == 0)
return (0);
/* l2arc read error; goto zio_read() */
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
} else {
DTRACE_PROBE1(l2arc__miss,
arc_buf_hdr_t *, hdr);
ARCSTAT_BUMP(arcstat_l2_misses);
if (HDR_L2_WRITING(hdr))
ARCSTAT_BUMP(arcstat_l2_rw_clash);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
spa_config_exit(spa, SCL_L2ARC, vd);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
Rebase master to b108
2009-02-18 20:51:31 +00:00
} else {
if (vd != NULL)
spa_config_exit(spa, SCL_L2ARC, vd);
if (l2arc_ndev != 0) {
DTRACE_PROBE1(l2arc__miss,
arc_buf_hdr_t *, hdr);
ARCSTAT_BUMP(arcstat_l2_misses);
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
rzio = zio_read(pio, spa, bp, buf->b_data, size,
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
arc_read_done, buf, priority, zio_flags, zb);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
if (*arc_flags & ARC_WAIT)
return (zio_wait(rzio));
ASSERT(*arc_flags & ARC_NOWAIT);
zio_nowait(rzio);
}
return (0);
}
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
arc_prune_t *
arc_add_prune_callback(arc_prune_func_t *func, void *private)
{
arc_prune_t *p;
p = kmem_alloc(sizeof(*p), KM_SLEEP);
p->p_pfunc = func;
p->p_private = private;
list_link_init(&p->p_node);
refcount_create(&p->p_refcnt);
mutex_enter(&arc_prune_mtx);
refcount_add(&p->p_refcnt, &arc_prune_list);
list_insert_head(&arc_prune_list, p);
mutex_exit(&arc_prune_mtx);
return (p);
}
void
arc_remove_prune_callback(arc_prune_t *p)
{
mutex_enter(&arc_prune_mtx);
list_remove(&arc_prune_list, p);
if (refcount_remove(&p->p_refcnt, &arc_prune_list) == 0) {
refcount_destroy(&p->p_refcnt);
kmem_free(p, sizeof (*p));
}
mutex_exit(&arc_prune_mtx);
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
void
arc_set_callback(arc_buf_t *buf, arc_evict_func_t *func, void *private)
{
ASSERT(buf->b_hdr != NULL);
ASSERT(buf->b_hdr->b_state != arc_anon);
ASSERT(!refcount_is_zero(&buf->b_hdr->b_refcnt) || func == NULL);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
ASSERT(buf->b_efunc == NULL);
ASSERT(!HDR_BUF_AVAILABLE(buf->b_hdr));
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
buf->b_efunc = func;
buf->b_private = private;
}
/*
* This is used by the DMU to let the ARC know that a buffer is
* being evicted, so the ARC should clean up. If this arc buf
* is not yet in the evicted state, it will be put there.
*/
int
arc_buf_evict(arc_buf_t *buf)
{
arc_buf_hdr_t *hdr;
kmutex_t *hash_lock;
arc_buf_t **bufp;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
mutex_enter(&buf->b_evict_lock);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
hdr = buf->b_hdr;
if (hdr == NULL) {
/*
* We are in arc_do_user_evicts().
*/
ASSERT(buf->b_data == NULL);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
mutex_exit(&buf->b_evict_lock);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
return (0);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
} else if (buf->b_data == NULL) {
arc_buf_t copy = *buf; /* structure assignment */
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
* We are on the eviction list; process this buffer now
* but let arc_do_user_evicts() do the reaping.
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
*/
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
buf->b_efunc = NULL;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
mutex_exit(&buf->b_evict_lock);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
VERIFY(copy.b_efunc(&copy) == 0);
return (1);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
hash_lock = HDR_LOCK(hdr);
mutex_enter(hash_lock);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
hdr = buf->b_hdr;
ASSERT3P(hash_lock, ==, HDR_LOCK(hdr));
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ASSERT3U(refcount_count(&hdr->b_refcnt), <, hdr->b_datacnt);
ASSERT(hdr->b_state == arc_mru || hdr->b_state == arc_mfu);
/*
* Pull this buffer off of the hdr
*/
bufp = &hdr->b_buf;
while (*bufp != buf)
bufp = &(*bufp)->b_next;
*bufp = buf->b_next;
ASSERT(buf->b_data != NULL);
arc_buf_destroy(buf, FALSE, FALSE);
if (hdr->b_datacnt == 0) {
arc_state_t *old_state = hdr->b_state;
arc_state_t *evicted_state;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
ASSERT(hdr->b_buf == NULL);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ASSERT(refcount_is_zero(&hdr->b_refcnt));
evicted_state =
(old_state == arc_mru) ? arc_mru_ghost : arc_mfu_ghost;
mutex_enter(&old_state->arcs_mtx);
mutex_enter(&evicted_state->arcs_mtx);
arc_change_state(evicted_state, hdr, hash_lock);
ASSERT(HDR_IN_HASH_TABLE(hdr));
hdr->b_flags |= ARC_IN_HASH_TABLE;
hdr->b_flags &= ~ARC_BUF_AVAILABLE;
mutex_exit(&evicted_state->arcs_mtx);
mutex_exit(&old_state->arcs_mtx);
}
mutex_exit(hash_lock);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
mutex_exit(&buf->b_evict_lock);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
VERIFY(buf->b_efunc(buf) == 0);
buf->b_efunc = NULL;
buf->b_private = NULL;
buf->b_hdr = NULL;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
buf->b_next = NULL;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
kmem_cache_free(buf_cache, buf);
return (1);
}
/*
* Release this buffer from the cache. This must be done
* after a read and prior to modifying the buffer contents.
* If the buffer has more than one reference, we must make
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
* a new hdr for the buffer.
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
*/
void
arc_release(arc_buf_t *buf, void *tag)
{
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
arc_buf_hdr_t *hdr;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
kmutex_t *hash_lock = NULL;
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
l2arc_buf_hdr_t *l2hdr;
Fix gcc uninitialized variable warnings Gcc -Wall warn: 'uninitialized variable' Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 16:58:04 +00:00
uint64_t buf_size = 0;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
/*
* It would be nice to assert that if it's DMU metadata (level >
* 0 || it's the dnode file), then it must be syncing context.
* But we don't know that information at this level.
*/
mutex_enter(&buf->b_evict_lock);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
hdr = buf->b_hdr;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/* this buffer is not on any list */
ASSERT(refcount_count(&hdr->b_refcnt) > 0);
if (hdr->b_state == arc_anon) {
/* this buffer is already released */
ASSERT(buf->b_efunc == NULL);
Rebase master to b117
2009-07-02 22:44:48 +00:00
} else {
hash_lock = HDR_LOCK(hdr);
mutex_enter(hash_lock);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
hdr = buf->b_hdr;
ASSERT3P(hash_lock, ==, HDR_LOCK(hdr));
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
l2hdr = hdr->b_l2hdr;
if (l2hdr) {
mutex_enter(&l2arc_buflist_mtx);
hdr->b_l2hdr = NULL;
buf_size = hdr->b_size;
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* Do we have more than one buf?
*/
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
if (hdr->b_datacnt > 1) {
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
arc_buf_hdr_t *nhdr;
arc_buf_t **bufp;
uint64_t blksz = hdr->b_size;
Rebase master to b108
2009-02-18 20:51:31 +00:00
uint64_t spa = hdr->b_spa;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
arc_buf_contents_t type = hdr->b_type;
uint32_t flags = hdr->b_flags;
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
ASSERT(hdr->b_buf != buf || buf->b_next != NULL);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
* Pull the data off of this hdr and attach it to
* a new anonymous hdr.
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
*/
(void) remove_reference(hdr, hash_lock, tag);
bufp = &hdr->b_buf;
while (*bufp != buf)
bufp = &(*bufp)->b_next;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
*bufp = buf->b_next;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
buf->b_next = NULL;
ASSERT3U(hdr->b_state->arcs_size, >=, hdr->b_size);
atomic_add_64(&hdr->b_state->arcs_size, -hdr->b_size);
if (refcount_is_zero(&hdr->b_refcnt)) {
uint64_t *size = &hdr->b_state->arcs_lsize[hdr->b_type];
ASSERT3U(*size, >=, hdr->b_size);
atomic_add_64(size, -hdr->b_size);
}
Illumos #3145, #3212 3145 single-copy arc 3212 ztest: race condition between vdev_online() and spa_vdev_remove() Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Eric Schrock <eric.schrock@delphix.com> Reviewed by: Justin T. Gibbs <gibbs@scsiguy.com> Approved by: Eric Schrock <eric.schrock@delphix.com> References: illumos-gate/commit/9253d63df408bb48584e0b1abfcc24ef2472382e illumos changeset: 13840:97fd5cdf328a https://www.illumos.org/issues/3145 https://www.illumos.org/issues/3212 Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #989 Closes #1137
2012-12-21 22:57:09 +00:00
/*
* We're releasing a duplicate user data buffer, update
* our statistics accordingly.
*/
if (hdr->b_type == ARC_BUFC_DATA) {
ARCSTAT_BUMPDOWN(arcstat_duplicate_buffers);
ARCSTAT_INCR(arcstat_duplicate_buffers_size,
-hdr->b_size);
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
hdr->b_datacnt -= 1;
arc_cksum_verify(buf);
mutex_exit(hash_lock);
nhdr = kmem_cache_alloc(hdr_cache, KM_PUSHPAGE);
nhdr->b_size = blksz;
nhdr->b_spa = spa;
nhdr->b_type = type;
nhdr->b_buf = buf;
nhdr->b_state = arc_anon;
nhdr->b_arc_access = 0;
nhdr->b_flags = flags & ARC_L2_WRITING;
nhdr->b_l2hdr = NULL;
nhdr->b_datacnt = 1;
nhdr->b_freeze_cksum = NULL;
(void) refcount_add(&nhdr->b_refcnt, tag);
buf->b_hdr = nhdr;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
mutex_exit(&buf->b_evict_lock);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
atomic_add_64(&arc_anon->arcs_size, blksz);
} else {
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
mutex_exit(&buf->b_evict_lock);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ASSERT(refcount_count(&hdr->b_refcnt) == 1);
ASSERT(!list_link_active(&hdr->b_arc_node));
ASSERT(!HDR_IO_IN_PROGRESS(hdr));
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (hdr->b_state != arc_anon)
arc_change_state(arc_anon, hdr, hash_lock);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
hdr->b_arc_access = 0;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (hash_lock)
mutex_exit(hash_lock);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
buf_discard_identity(hdr);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
arc_buf_thaw(buf);
}
buf->b_efunc = NULL;
buf->b_private = NULL;
if (l2hdr) {
list_remove(l2hdr->b_dev->l2ad_buflist, hdr);
kmem_free(l2hdr, sizeof (l2arc_buf_hdr_t));
ARCSTAT_INCR(arcstat_l2_size, -buf_size);
mutex_exit(&l2arc_buflist_mtx);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
/*
* Release this buffer. If it does not match the provided BP, fill it
* with that block's contents.
*/
/* ARGSUSED */
int
arc_release_bp(arc_buf_t *buf, void *tag, blkptr_t *bp, spa_t *spa,
zbookmark_t *zb)
{
arc_release(buf, tag);
return (0);
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
int
arc_released(arc_buf_t *buf)
{
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
int released;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
mutex_enter(&buf->b_evict_lock);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
released = (buf->b_data != NULL && buf->b_hdr->b_state == arc_anon);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
mutex_exit(&buf->b_evict_lock);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
return (released);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
int
arc_has_callback(arc_buf_t *buf)
{
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
int callback;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
mutex_enter(&buf->b_evict_lock);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
callback = (buf->b_efunc != NULL);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
mutex_exit(&buf->b_evict_lock);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
return (callback);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
#ifdef ZFS_DEBUG
int
arc_referenced(arc_buf_t *buf)
{
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
int referenced;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
mutex_enter(&buf->b_evict_lock);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
referenced = (refcount_count(&buf->b_hdr->b_refcnt));
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
mutex_exit(&buf->b_evict_lock);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
return (referenced);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
#endif
static void
arc_write_ready(zio_t *zio)
{
arc_write_callback_t *callback = zio->io_private;
arc_buf_t *buf = callback->awcb_buf;
arc_buf_hdr_t *hdr = buf->b_hdr;
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
ASSERT(!refcount_is_zero(&buf->b_hdr->b_refcnt));
callback->awcb_ready(zio, buf, callback->awcb_private);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* If the IO is already in progress, then this is a re-write
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
* attempt, so we need to thaw and re-compute the cksum.
* It is the responsibility of the callback to handle the
* accounting for any re-write attempt.
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
*/
if (HDR_IO_IN_PROGRESS(hdr)) {
mutex_enter(&hdr->b_freeze_lock);
if (hdr->b_freeze_cksum != NULL) {
kmem_free(hdr->b_freeze_cksum, sizeof (zio_cksum_t));
hdr->b_freeze_cksum = NULL;
}
mutex_exit(&hdr->b_freeze_lock);
}
arc_cksum_compute(buf, B_FALSE);
hdr->b_flags |= ARC_IO_IN_PROGRESS;
}
static void
arc_write_done(zio_t *zio)
{
arc_write_callback_t *callback = zio->io_private;
arc_buf_t *buf = callback->awcb_buf;
arc_buf_hdr_t *hdr = buf->b_hdr;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
ASSERT(hdr->b_acb == NULL);
if (zio->io_error == 0) {
hdr->b_dva = *BP_IDENTITY(zio->io_bp);
hdr->b_birth = BP_PHYSICAL_BIRTH(zio->io_bp);
hdr->b_cksum0 = zio->io_bp->blk_cksum.zc_word[0];
} else {
ASSERT(BUF_EMPTY(hdr));
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* If the block to be written was all-zero, we may have
* compressed it away. In this case no write was performed
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
* so there will be no dva/birth/checksum. The buffer must
* therefore remain anonymous (and uncached).
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
*/
if (!BUF_EMPTY(hdr)) {
arc_buf_hdr_t *exists;
kmutex_t *hash_lock;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
ASSERT(zio->io_error == 0);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
arc_cksum_verify(buf);
exists = buf_hash_insert(hdr, &hash_lock);
if (exists) {
/*
* This can only happen if we overwrite for
* sync-to-convergence, because we remove
* buffers from the hash table when we arc_free().
*/
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (zio->io_flags & ZIO_FLAG_IO_REWRITE) {
if (!BP_EQUAL(&zio->io_bp_orig, zio->io_bp))
panic("bad overwrite, hdr=%p exists=%p",
(void *)hdr, (void *)exists);
ASSERT(refcount_is_zero(&exists->b_refcnt));
arc_change_state(arc_anon, exists, hash_lock);
mutex_exit(hash_lock);
arc_hdr_destroy(exists);
exists = buf_hash_insert(hdr, &hash_lock);
ASSERT3P(exists, ==, NULL);
} else {
/* Dedup */
ASSERT(hdr->b_datacnt == 1);
ASSERT(hdr->b_state == arc_anon);
ASSERT(BP_GET_DEDUP(zio->io_bp));
ASSERT(BP_GET_LEVEL(zio->io_bp) == 0);
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
hdr->b_flags &= ~ARC_IO_IN_PROGRESS;
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
/* if it's not anon, we are doing a scrub */
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (!exists && hdr->b_state == arc_anon)
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
arc_access(hdr, hash_lock);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
mutex_exit(hash_lock);
} else {
hdr->b_flags &= ~ARC_IO_IN_PROGRESS;
}
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
ASSERT(!refcount_is_zero(&hdr->b_refcnt));
callback->awcb_done(zio, buf, callback->awcb_private);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
kmem_free(callback, sizeof (arc_write_callback_t));
}
zio_t *
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
arc_write(zio_t *pio, spa_t *spa, uint64_t txg,
blkptr_t *bp, arc_buf_t *buf, boolean_t l2arc, const zio_prop_t *zp,
arc_done_func_t *ready, arc_done_func_t *done, void *private,
int priority, int zio_flags, const zbookmark_t *zb)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
{
arc_buf_hdr_t *hdr = buf->b_hdr;
arc_write_callback_t *callback;
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
zio_t *zio;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
ASSERT(ready != NULL);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
ASSERT(done != NULL);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ASSERT(!HDR_IO_ERROR(hdr));
ASSERT((hdr->b_flags & ARC_IO_IN_PROGRESS) == 0);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
ASSERT(hdr->b_acb == NULL);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
if (l2arc)
hdr->b_flags |= ARC_L2CACHE;
Switch KM_SLEEP to KM_PUSHPAGE Differences between how paging is done on Solaris and Linux can cause deadlocks if KM_SLEEP is used in any the following contexts. * The txg_sync thread * The zvol write/discard threads * The zpl_putpage() VFS callback This is because KM_SLEEP will allow for direct reclaim which may result in the VM calling back in to the filesystem or block layer to write out pages. If a lock is held over this operation the potential exists to deadlock the system. To ensure forward progress all memory allocations in these contexts must us KM_PUSHPAGE which disables performing any I/O to accomplish the memory allocation. Previously, this behavior was acheived by setting PF_MEMALLOC on the thread. However, that resulted in unexpected side effects such as the exhaustion of pages in ZONE_DMA. This approach touchs more of the zfs code, but it is more consistent with the right way to handle these cases under Linux. This is patch lays the ground work for being able to safely revert the following commits which used PF_MEMALLOC: 21ade34 Disable direct reclaim for z_wr_* threads cfc9a5c Fix zpl_writepage() deadlock eec8164 Fix ASSERTION(!dsl_pool_sync_context(tx->tx_pool)) Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #726
2012-05-07 17:49:51 +00:00
callback = kmem_zalloc(sizeof (arc_write_callback_t), KM_PUSHPAGE);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
callback->awcb_ready = ready;
callback->awcb_done = done;
callback->awcb_private = private;
callback->awcb_buf = buf;
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
zio = zio_write(pio, spa, txg, bp, buf->b_data, hdr->b_size, zp,
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
arc_write_ready, arc_write_done, callback, priority, zio_flags, zb);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
return (zio);
}
static int
Rebase master to b117
2009-07-02 22:44:48 +00:00
arc_memory_throttle(uint64_t reserve, uint64_t inflight_data, uint64_t txg)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
{
#ifdef _KERNEL
Integrate ARC more tightly with Linux Under Solaris the ARC was designed to stay one step ahead of the VM subsystem. It would attempt to recognize low memory situtions before they occured and evict data from the cache. It would also make assessments about if there was enough free memory to perform a specific operation. This was all possible because Solaris exposes a fairly decent view of the memory state of the system to other kernel threads. Linux on the other hand does not make this information easily available. To avoid extensive modifications to the ARC the SPL attempts to provide these same interfaces. While this works it is not ideal and problems can arise when the ARC and Linux have different ideas about when your out of memory. This has manifested itself in the past as a spinning arc_reclaim_thread. This patch abandons the emulated Solaris interfaces in favor of the prefered Linux interface. That means moving the bulk of the memory reclaim logic out of the arc_reclaim_thread and in to the evict driven shrinker callback. The Linux VM will call this function when it needs memory. The ARC is then responsible for attempting to free the requested amount of memory if possible. Several interfaces have been modified to accomidate this approach, however the basic user space implementation remains the same. The following changes almost exclusively just apply to the kernel implementation. * Removed the hdr_recl() reclaim callback which is redundant with the broader arc_shrinker_func(). * Reduced arc_grow_retry to 5 seconds from 60. This is now used internally in the ARC with arc_no_grow to indicate that direct reclaim was recently performed. This typically indicates a rapid change in memory demands which the kswapd threads were unable to keep ahead of. As long as direct reclaim is happening once every 5 seconds arc growth will be paused to avoid further contributing to the existing memory pressure. The more common indirect reclaim paths will not set arc_no_grow. * arc_shrink() has been extended to take the number of bytes by which arc_c should be reduced. This allows for a more granual reduction of the arc target. Since the kernel provides a reclaim value to the arc_shrinker_func() this value is used instead of 1<<arc_shrink_shift. * arc_reclaim_needed() has been removed. It was used to determine if the system was under memory pressure and relied extensively on Solaris specific VM interfaces. In most case the new code just checks arc_no_grow which indicates that within the last arc_grow_retry seconds direct memory reclaim occurred. * arc_memory_throttle() has been updated to always include the amount of evictable memory (arc and page cache) in its free space calculations. This space is largely available in most call paths due to direct memory reclaim. * The Solaris pageout code was also removed to avoid confusion. It has always been disabled due to proc_pageout being defined as NULL in the Linux port. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-13 21:29:16 +00:00
uint64_t available_memory;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Integrate ARC more tightly with Linux Under Solaris the ARC was designed to stay one step ahead of the VM subsystem. It would attempt to recognize low memory situtions before they occured and evict data from the cache. It would also make assessments about if there was enough free memory to perform a specific operation. This was all possible because Solaris exposes a fairly decent view of the memory state of the system to other kernel threads. Linux on the other hand does not make this information easily available. To avoid extensive modifications to the ARC the SPL attempts to provide these same interfaces. While this works it is not ideal and problems can arise when the ARC and Linux have different ideas about when your out of memory. This has manifested itself in the past as a spinning arc_reclaim_thread. This patch abandons the emulated Solaris interfaces in favor of the prefered Linux interface. That means moving the bulk of the memory reclaim logic out of the arc_reclaim_thread and in to the evict driven shrinker callback. The Linux VM will call this function when it needs memory. The ARC is then responsible for attempting to free the requested amount of memory if possible. Several interfaces have been modified to accomidate this approach, however the basic user space implementation remains the same. The following changes almost exclusively just apply to the kernel implementation. * Removed the hdr_recl() reclaim callback which is redundant with the broader arc_shrinker_func(). * Reduced arc_grow_retry to 5 seconds from 60. This is now used internally in the ARC with arc_no_grow to indicate that direct reclaim was recently performed. This typically indicates a rapid change in memory demands which the kswapd threads were unable to keep ahead of. As long as direct reclaim is happening once every 5 seconds arc growth will be paused to avoid further contributing to the existing memory pressure. The more common indirect reclaim paths will not set arc_no_grow. * arc_shrink() has been extended to take the number of bytes by which arc_c should be reduced. This allows for a more granual reduction of the arc target. Since the kernel provides a reclaim value to the arc_shrinker_func() this value is used instead of 1<<arc_shrink_shift. * arc_reclaim_needed() has been removed. It was used to determine if the system was under memory pressure and relied extensively on Solaris specific VM interfaces. In most case the new code just checks arc_no_grow which indicates that within the last arc_grow_retry seconds direct memory reclaim occurred. * arc_memory_throttle() has been updated to always include the amount of evictable memory (arc and page cache) in its free space calculations. This space is largely available in most call paths due to direct memory reclaim. * The Solaris pageout code was also removed to avoid confusion. It has always been disabled due to proc_pageout being defined as NULL in the Linux port. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-13 21:29:16 +00:00
/* Easily reclaimable memory (free + inactive + arc-evictable) */
available_memory = ptob(spl_kmem_availrmem()) + arc_evictable_memory();
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Integrate ARC more tightly with Linux Under Solaris the ARC was designed to stay one step ahead of the VM subsystem. It would attempt to recognize low memory situtions before they occured and evict data from the cache. It would also make assessments about if there was enough free memory to perform a specific operation. This was all possible because Solaris exposes a fairly decent view of the memory state of the system to other kernel threads. Linux on the other hand does not make this information easily available. To avoid extensive modifications to the ARC the SPL attempts to provide these same interfaces. While this works it is not ideal and problems can arise when the ARC and Linux have different ideas about when your out of memory. This has manifested itself in the past as a spinning arc_reclaim_thread. This patch abandons the emulated Solaris interfaces in favor of the prefered Linux interface. That means moving the bulk of the memory reclaim logic out of the arc_reclaim_thread and in to the evict driven shrinker callback. The Linux VM will call this function when it needs memory. The ARC is then responsible for attempting to free the requested amount of memory if possible. Several interfaces have been modified to accomidate this approach, however the basic user space implementation remains the same. The following changes almost exclusively just apply to the kernel implementation. * Removed the hdr_recl() reclaim callback which is redundant with the broader arc_shrinker_func(). * Reduced arc_grow_retry to 5 seconds from 60. This is now used internally in the ARC with arc_no_grow to indicate that direct reclaim was recently performed. This typically indicates a rapid change in memory demands which the kswapd threads were unable to keep ahead of. As long as direct reclaim is happening once every 5 seconds arc growth will be paused to avoid further contributing to the existing memory pressure. The more common indirect reclaim paths will not set arc_no_grow. * arc_shrink() has been extended to take the number of bytes by which arc_c should be reduced. This allows for a more granual reduction of the arc target. Since the kernel provides a reclaim value to the arc_shrinker_func() this value is used instead of 1<<arc_shrink_shift. * arc_reclaim_needed() has been removed. It was used to determine if the system was under memory pressure and relied extensively on Solaris specific VM interfaces. In most case the new code just checks arc_no_grow which indicates that within the last arc_grow_retry seconds direct memory reclaim occurred. * arc_memory_throttle() has been updated to always include the amount of evictable memory (arc and page cache) in its free space calculations. This space is largely available in most call paths due to direct memory reclaim. * The Solaris pageout code was also removed to avoid confusion. It has always been disabled due to proc_pageout being defined as NULL in the Linux port. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-13 21:29:16 +00:00
if (available_memory <= zfs_write_limit_max) {
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ARCSTAT_INCR(arcstat_memory_throttle_count, 1);
Add 'dmu_tx' kstats entry Keep counters for the various reasons that a thread may end up in txg_wait_open() waiting on a new txg. This can be useful when attempting to determine why a particular workload is under performing. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-01-20 18:58:57 +00:00
DMU_TX_STAT_BUMP(dmu_tx_memory_reclaim);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
return (EAGAIN);
}
if (inflight_data > available_memory / 4) {
ARCSTAT_INCR(arcstat_memory_throttle_count, 1);
Add 'dmu_tx' kstats entry Keep counters for the various reasons that a thread may end up in txg_wait_open() waiting on a new txg. This can be useful when attempting to determine why a particular workload is under performing. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-01-20 18:58:57 +00:00
DMU_TX_STAT_BUMP(dmu_tx_memory_inflight);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
return (ERESTART);
}
#endif
return (0);
}
void
arc_tempreserve_clear(uint64_t reserve)
{
atomic_add_64(&arc_tempreserve, -reserve);
ASSERT((int64_t)arc_tempreserve >= 0);
}
int
arc_tempreserve_space(uint64_t reserve, uint64_t txg)
{
int error;
Rebase master to b117
2009-07-02 22:44:48 +00:00
uint64_t anon_size;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
#ifdef ZFS_DEBUG
/*
* Once in a while, fail for no reason. Everything should cope.
*/
if (spa_get_random(10000) == 0) {
dprintf("forcing random failure\n");
return (ERESTART);
}
#endif
if (reserve > arc_c/4 && !arc_no_grow)
arc_c = MIN(arc_c_max, reserve * 4);
Add 'dmu_tx' kstats entry Keep counters for the various reasons that a thread may end up in txg_wait_open() waiting on a new txg. This can be useful when attempting to determine why a particular workload is under performing. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-01-20 18:58:57 +00:00
if (reserve > arc_c) {
DMU_TX_STAT_BUMP(dmu_tx_memory_reserve);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
return (ENOMEM);
Add 'dmu_tx' kstats entry Keep counters for the various reasons that a thread may end up in txg_wait_open() waiting on a new txg. This can be useful when attempting to determine why a particular workload is under performing. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-01-20 18:58:57 +00:00
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Rebase master to b117
2009-07-02 22:44:48 +00:00
/*
* Don't count loaned bufs as in flight dirty data to prevent long
* network delays from blocking transactions that are ready to be
* assigned to a txg.
*/
anon_size = MAX((int64_t)(arc_anon->arcs_size - arc_loaned_bytes), 0);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* Writes will, almost always, require additional memory allocations
* in order to compress/encrypt/etc the data. We therefor need to
* make sure that there is sufficient available memory for this.
*/
Fix gcc missing parenthesis warnings Gcc -Wall warn: 'missing parenthesis' Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 16:52:42 +00:00
if ((error = arc_memory_throttle(reserve, anon_size, txg)))
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
return (error);
/*
* Throttle writes when the amount of dirty data in the cache
* gets too large. We try to keep the cache less than half full
* of dirty blocks so that our sync times don't grow too large.
* Note: if two requests come in concurrently, we might let them
* both succeed, when one of them should fail. Not a huge deal.
*/
Rebase master to b117
2009-07-02 22:44:48 +00:00
if (reserve + arc_tempreserve + anon_size > arc_c / 2 &&
anon_size > arc_c / 4) {
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
dprintf("failing, arc_tempreserve=%lluK anon_meta=%lluK "
"anon_data=%lluK tempreserve=%lluK arc_c=%lluK\n",
arc_tempreserve>>10,
arc_anon->arcs_lsize[ARC_BUFC_METADATA]>>10,
arc_anon->arcs_lsize[ARC_BUFC_DATA]>>10,
reserve>>10, arc_c>>10);
Add 'dmu_tx' kstats entry Keep counters for the various reasons that a thread may end up in txg_wait_open() waiting on a new txg. This can be useful when attempting to determine why a particular workload is under performing. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-01-20 18:58:57 +00:00
DMU_TX_STAT_BUMP(dmu_tx_dirty_throttle);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
return (ERESTART);
}
atomic_add_64(&arc_tempreserve, reserve);
return (0);
}
Add arc_state_t stats to arcstats To ensure the arc is behaving properly we need greater visibility in to exactly how it's managing the systems memory. This patch takes one step in that direction be adding the current arc_state_t for the anon, mru, mru_ghost, mfu, and mfs_ghost lists. The l2 arc_state_t is already well represented in the arcstats. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-01-30 21:28:40 +00:00
static void
arc_kstat_update_state(arc_state_t *state, kstat_named_t *size,
kstat_named_t *evict_data, kstat_named_t *evict_metadata)
{
size->value.ui64 = state->arcs_size;
evict_data->value.ui64 = state->arcs_lsize[ARC_BUFC_DATA];
evict_metadata->value.ui64 = state->arcs_lsize[ARC_BUFC_METADATA];
}
static int
arc_kstat_update(kstat_t *ksp, int rw)
{
arc_stats_t *as = ksp->ks_data;
if (rw == KSTAT_WRITE) {
return (EACCES);
} else {
arc_kstat_update_state(arc_anon,
&as->arcstat_anon_size,
&as->arcstat_anon_evict_data,
&as->arcstat_anon_evict_metadata);
arc_kstat_update_state(arc_mru,
&as->arcstat_mru_size,
&as->arcstat_mru_evict_data,
&as->arcstat_mru_evict_metadata);
arc_kstat_update_state(arc_mru_ghost,
&as->arcstat_mru_ghost_size,
&as->arcstat_mru_ghost_evict_data,
&as->arcstat_mru_ghost_evict_metadata);
arc_kstat_update_state(arc_mfu,
&as->arcstat_mfu_size,
&as->arcstat_mfu_evict_data,
&as->arcstat_mfu_evict_metadata);
Properly expose the mfu ghost list kstats Due to a typo the mru ghost lists stats were accidentally being exposed as the mfu ghost list stats. This was harmless but confusing since memory usage could be over reported. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-27 17:10:26 +00:00
arc_kstat_update_state(arc_mfu_ghost,
Add arc_state_t stats to arcstats To ensure the arc is behaving properly we need greater visibility in to exactly how it's managing the systems memory. This patch takes one step in that direction be adding the current arc_state_t for the anon, mru, mru_ghost, mfu, and mfs_ghost lists. The l2 arc_state_t is already well represented in the arcstats. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-01-30 21:28:40 +00:00
&as->arcstat_mfu_ghost_size,
&as->arcstat_mfu_ghost_evict_data,
&as->arcstat_mfu_ghost_evict_metadata);
}
return (0);
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
void
arc_init(void)
{
mutex_init(&arc_reclaim_thr_lock, NULL, MUTEX_DEFAULT, NULL);
cv_init(&arc_reclaim_thr_cv, NULL, CV_DEFAULT, NULL);
/* Convert seconds to clock ticks */
arc_min_prefetch_lifespan = 1 * hz;
/* Start out with 1/8 of all memory */
arc_c = physmem * PAGESIZE / 8;
#ifdef _KERNEL
/*
* On architectures where the physical memory can be larger
* than the addressable space (intel in 32-bit mode), we may
* need to limit the cache to 1/8 of VM size.
*/
arc_c = MIN(arc_c, vmem_size(heap_arena, VMEM_ALLOC | VMEM_FREE) / 8);
Add direct+indirect ARC reclaim Under OpenSolaris all memory reclaim is done asyncronously. Under Linux memory reclaim is done asynchronously _and_ synchronously. When a process allocates memory with GFP_KERNEL it explicitly allows the kernel to do reclaim on its behalf to satify the allocation. If that GFP_KERNEL allocation fails the kernel may take more drastic measures to reclaim the memory such as killing user space processes. This was observed to happen with ZFS because the ARC could consume a large fraction of the system memory but no synchronous reclaim could be performed on it. The result was GFP_KERNEL allocations could fail resulting in OOM events, and only moments latter the arc_reclaim thread would free unused memory from the ARC. This change leaves the arc_thread in place to manage the fundamental ARC behavior. But it adds a synchronous (direct) reclaim path for the ARC which can be called when memory is badly needed. It also adds an asynchronous (indirect) reclaim path which is called much more frequently to prune the ARC slab caches.
2011-03-30 01:08:59 +00:00
/*
* Register a shrinker to support synchronous (direct) memory
* reclaim from the arc. This is done to prevent kswapd from
* swapping out pages when it is preferable to shrink the arc.
*/
spl_register_shrinker(&arc_shrinker);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
#endif
/* set min cache to 1/32 of all memory, or 64MB, whichever is more */
arc_c_min = MAX(arc_c / 4, 64<<20);
Update ARC memory limits to account for SLUB internal fragmentation 23bdb07d4e4c435205d25d3efdb5fef2d089ce5e updated the ARC memory limits to be 1/2 of memory or all but 4GB. Unfortunately, these values assume zero internal fragmentation in the SLUB allocator, when in reality, the internal fragmentation could be as high as 50%, effectively doubling memory usage. This poses clear safety issues, because it permits the size of ARC to exceed system memory. This patch changes this so that the default value of arc_c_max is always 1/2 of system memory. This effectively limits the ARC to the memory that the system has physically installed. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #660
2012-04-12 21:22:08 +00:00
/* set max to 1/2 of all memory */
Update default ARC memory limits In the upstream OpenSolaris ZFS code the maximum ARC usage is limited to 3/4 of memory or all but 1GB, whichever is larger. Because of how Linux's VM subsystem is organized these defaults have proven to be too large which can lead to stability issues. To avoid making everyone manually tune the ARC the defaults are being changed to 1/2 of memory or all but 4GB. The rational for this is as follows: * Desktop Systems (less than 8GB of memory) Limiting the ARC to 1/2 of memory is desirable for desktop systems which have highly dynamic memory requirements. For example, launching your web browser can suddenly result in a demand for several gigabytes of memory. This memory must be reclaimed from the ARC cache which can take some time. The user will experience this reclaim time as a sluggish system with poor interactive performance. Thus in this case it is preferable to leave the memory as free and available for immediate use. * Server Systems (more than 8GB of memory) Using all but 4GB of memory for the ARC is preferable for server systems. These systems often run with minimal user interaction and have long running daemons with relatively stable memory demands. These systems will benefit most by having as much data cached in memory as possible. These values should work well for most configurations. However, if you have a desktop system with more than 8GB of memory you may wish to further restrict the ARC. This can still be accomplished by setting the 'zfs_arc_max' module option. Additionally, keep in mind these aren't currently hard limits. The ARC is based on a slab implementation which can suffer from memory fragmentation. Because this fragmentation is not visible from the ARC it may believe it is within the specified limits while actually consuming slightly more memory. How much more memory get's consumed will be determined by how badly fragmented the slabs are. In the long term this can be mitigated by slab defragmentation code which was OpenSolaris solution. Or preferably, using the page cache to back the ARC under Linux would be even better. See issue #75 for the benefits of more tightly integrating with the page cache. This change also fixes a issue where the default ARC max was being set incorrectly for machines with less than 2GB of memory. The constant in the arc_c_max comparison must be explicitly cast to a uint64_t type to prevent overflow and the wrong conditional branch being taken. This failure was typically observed in VMs which are commonly created with less than 2GB of memory. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #75
2011-12-05 18:08:29 +00:00
arc_c_max = MAX(arc_c * 4, arc_c_max);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* Allow the tunables to override our calculations if they are
* reasonable (ie. over 64MB)
*/
if (zfs_arc_max > 64<<20 && zfs_arc_max < physmem * PAGESIZE)
arc_c_max = zfs_arc_max;
if (zfs_arc_min > 64<<20 && zfs_arc_min <= arc_c_max)
arc_c_min = zfs_arc_min;
arc_c = arc_c_max;
arc_p = (arc_c >> 1);
/* limit meta-data to 1/4 of the arc capacity */
arc_meta_limit = arc_c_max / 4;
Add missing arcstats The following useful values were missing the arcstats. This change adds them in to provide greater visibility in to the arcs behavior. arc_no_grow 4 0 arc_tempreserve 4 0 arc_loaned_bytes 4 0 arc_meta_used 4 624774592 arc_meta_limit 4 400785408 arc_meta_max 4 625594176
2011-03-24 19:13:55 +00:00
arc_meta_max = 0;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/* Allow the tunable to override if it is reasonable */
if (zfs_arc_meta_limit > 0 && zfs_arc_meta_limit <= arc_c_max)
arc_meta_limit = zfs_arc_meta_limit;
if (arc_c_min < arc_meta_limit / 2 && zfs_arc_min == 0)
arc_c_min = arc_meta_limit / 2;
Rebase master to b108
2009-02-18 20:51:31 +00:00
if (zfs_arc_grow_retry > 0)
arc_grow_retry = zfs_arc_grow_retry;
if (zfs_arc_shrink_shift > 0)
arc_shrink_shift = zfs_arc_shrink_shift;
if (zfs_arc_p_min_shift > 0)
arc_p_min_shift = zfs_arc_p_min_shift;
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
if (zfs_arc_meta_prune > 0)
arc_meta_prune = zfs_arc_meta_prune;
Enforce ARC meta-data limits This change ensures the ARC meta-data limits are enforced. Without this enforcement meta-data can grow to consume all of the ARC cache pushing out data and hurting performance. The cache is aggressively reclaimed but this is a soft and not a hard limit. The cache may exceed the set limit briefly before being brought under control. By default 25% of the ARC capacity can be used for meta-data. This limit can be tuned by setting the 'zfs_arc_meta_limit' module option. Once this limit is exceeded meta-data reclaim will occur in 3 percent chunks, or may be tuned using 'arc_reduce_dnlc_percent'. Closes #193
2011-03-31 01:59:17 +00:00
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/* if kmem_flags are set, lets try to use less memory */
if (kmem_debugging())
arc_c = arc_c / 2;
if (arc_c < arc_c_min)
arc_c = arc_c_min;
arc_anon = &ARC_anon;
arc_mru = &ARC_mru;
arc_mru_ghost = &ARC_mru_ghost;
arc_mfu = &ARC_mfu;
arc_mfu_ghost = &ARC_mfu_ghost;
arc_l2c_only = &ARC_l2c_only;
arc_size = 0;
mutex_init(&arc_anon->arcs_mtx, NULL, MUTEX_DEFAULT, NULL);
mutex_init(&arc_mru->arcs_mtx, NULL, MUTEX_DEFAULT, NULL);
mutex_init(&arc_mru_ghost->arcs_mtx, NULL, MUTEX_DEFAULT, NULL);
mutex_init(&arc_mfu->arcs_mtx, NULL, MUTEX_DEFAULT, NULL);
mutex_init(&arc_mfu_ghost->arcs_mtx, NULL, MUTEX_DEFAULT, NULL);
mutex_init(&arc_l2c_only->arcs_mtx, NULL, MUTEX_DEFAULT, NULL);
list_create(&arc_mru->arcs_list[ARC_BUFC_METADATA],
sizeof (arc_buf_hdr_t), offsetof(arc_buf_hdr_t, b_arc_node));
list_create(&arc_mru->arcs_list[ARC_BUFC_DATA],
sizeof (arc_buf_hdr_t), offsetof(arc_buf_hdr_t, b_arc_node));
list_create(&arc_mru_ghost->arcs_list[ARC_BUFC_METADATA],
sizeof (arc_buf_hdr_t), offsetof(arc_buf_hdr_t, b_arc_node));
list_create(&arc_mru_ghost->arcs_list[ARC_BUFC_DATA],
sizeof (arc_buf_hdr_t), offsetof(arc_buf_hdr_t, b_arc_node));
list_create(&arc_mfu->arcs_list[ARC_BUFC_METADATA],
sizeof (arc_buf_hdr_t), offsetof(arc_buf_hdr_t, b_arc_node));
list_create(&arc_mfu->arcs_list[ARC_BUFC_DATA],
sizeof (arc_buf_hdr_t), offsetof(arc_buf_hdr_t, b_arc_node));
list_create(&arc_mfu_ghost->arcs_list[ARC_BUFC_METADATA],
sizeof (arc_buf_hdr_t), offsetof(arc_buf_hdr_t, b_arc_node));
list_create(&arc_mfu_ghost->arcs_list[ARC_BUFC_DATA],
sizeof (arc_buf_hdr_t), offsetof(arc_buf_hdr_t, b_arc_node));
list_create(&arc_l2c_only->arcs_list[ARC_BUFC_METADATA],
sizeof (arc_buf_hdr_t), offsetof(arc_buf_hdr_t, b_arc_node));
list_create(&arc_l2c_only->arcs_list[ARC_BUFC_DATA],
sizeof (arc_buf_hdr_t), offsetof(arc_buf_hdr_t, b_arc_node));
buf_init();
arc_thread_exit = 0;
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
list_create(&arc_prune_list, sizeof (arc_prune_t),
offsetof(arc_prune_t, p_node));
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
arc_eviction_list = NULL;
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
mutex_init(&arc_prune_mtx, NULL, MUTEX_DEFAULT, NULL);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
mutex_init(&arc_eviction_mtx, NULL, MUTEX_DEFAULT, NULL);
bzero(&arc_eviction_hdr, sizeof (arc_buf_hdr_t));
arc_ksp = kstat_create("zfs", 0, "arcstats", "misc", KSTAT_TYPE_NAMED,
sizeof (arc_stats) / sizeof (kstat_named_t), KSTAT_FLAG_VIRTUAL);
if (arc_ksp != NULL) {
arc_ksp->ks_data = &arc_stats;
Add arc_state_t stats to arcstats To ensure the arc is behaving properly we need greater visibility in to exactly how it's managing the systems memory. This patch takes one step in that direction be adding the current arc_state_t for the anon, mru, mru_ghost, mfu, and mfs_ghost lists. The l2 arc_state_t is already well represented in the arcstats. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-01-30 21:28:40 +00:00
arc_ksp->ks_update = arc_kstat_update;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
kstat_install(arc_ksp);
}
Integrate ARC more tightly with Linux Under Solaris the ARC was designed to stay one step ahead of the VM subsystem. It would attempt to recognize low memory situtions before they occured and evict data from the cache. It would also make assessments about if there was enough free memory to perform a specific operation. This was all possible because Solaris exposes a fairly decent view of the memory state of the system to other kernel threads. Linux on the other hand does not make this information easily available. To avoid extensive modifications to the ARC the SPL attempts to provide these same interfaces. While this works it is not ideal and problems can arise when the ARC and Linux have different ideas about when your out of memory. This has manifested itself in the past as a spinning arc_reclaim_thread. This patch abandons the emulated Solaris interfaces in favor of the prefered Linux interface. That means moving the bulk of the memory reclaim logic out of the arc_reclaim_thread and in to the evict driven shrinker callback. The Linux VM will call this function when it needs memory. The ARC is then responsible for attempting to free the requested amount of memory if possible. Several interfaces have been modified to accomidate this approach, however the basic user space implementation remains the same. The following changes almost exclusively just apply to the kernel implementation. * Removed the hdr_recl() reclaim callback which is redundant with the broader arc_shrinker_func(). * Reduced arc_grow_retry to 5 seconds from 60. This is now used internally in the ARC with arc_no_grow to indicate that direct reclaim was recently performed. This typically indicates a rapid change in memory demands which the kswapd threads were unable to keep ahead of. As long as direct reclaim is happening once every 5 seconds arc growth will be paused to avoid further contributing to the existing memory pressure. The more common indirect reclaim paths will not set arc_no_grow. * arc_shrink() has been extended to take the number of bytes by which arc_c should be reduced. This allows for a more granual reduction of the arc target. Since the kernel provides a reclaim value to the arc_shrinker_func() this value is used instead of 1<<arc_shrink_shift. * arc_reclaim_needed() has been removed. It was used to determine if the system was under memory pressure and relied extensively on Solaris specific VM interfaces. In most case the new code just checks arc_no_grow which indicates that within the last arc_grow_retry seconds direct memory reclaim occurred. * arc_memory_throttle() has been updated to always include the amount of evictable memory (arc and page cache) in its free space calculations. This space is largely available in most call paths due to direct memory reclaim. * The Solaris pageout code was also removed to avoid confusion. It has always been disabled due to proc_pageout being defined as NULL in the Linux port. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-13 21:29:16 +00:00
(void) thread_create(NULL, 0, arc_adapt_thread, NULL, 0, &p0,
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
TS_RUN, minclsyspri);
arc_dead = FALSE;
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
arc_warm = B_FALSE;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
if (zfs_write_limit_max == 0)
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
zfs_write_limit_max = ptob(physmem) >> zfs_write_limit_shift;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
else
zfs_write_limit_shift = 0;
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
mutex_init(&zfs_write_limit_lock, NULL, MUTEX_DEFAULT, NULL);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
void
arc_fini(void)
{
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
arc_prune_t *p;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
mutex_enter(&arc_reclaim_thr_lock);
Add direct+indirect ARC reclaim Under OpenSolaris all memory reclaim is done asyncronously. Under Linux memory reclaim is done asynchronously _and_ synchronously. When a process allocates memory with GFP_KERNEL it explicitly allows the kernel to do reclaim on its behalf to satify the allocation. If that GFP_KERNEL allocation fails the kernel may take more drastic measures to reclaim the memory such as killing user space processes. This was observed to happen with ZFS because the ARC could consume a large fraction of the system memory but no synchronous reclaim could be performed on it. The result was GFP_KERNEL allocations could fail resulting in OOM events, and only moments latter the arc_reclaim thread would free unused memory from the ARC. This change leaves the arc_thread in place to manage the fundamental ARC behavior. But it adds a synchronous (direct) reclaim path for the ARC which can be called when memory is badly needed. It also adds an asynchronous (indirect) reclaim path which is called much more frequently to prune the ARC slab caches.
2011-03-30 01:08:59 +00:00
#ifdef _KERNEL
spl_unregister_shrinker(&arc_shrinker);
#endif /* _KERNEL */
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
arc_thread_exit = 1;
while (arc_thread_exit != 0)
cv_wait(&arc_reclaim_thr_cv, &arc_reclaim_thr_lock);
mutex_exit(&arc_reclaim_thr_lock);
arc_flush(NULL);
arc_dead = TRUE;
if (arc_ksp != NULL) {
kstat_delete(arc_ksp);
arc_ksp = NULL;
}
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
mutex_enter(&arc_prune_mtx);
while ((p = list_head(&arc_prune_list)) != NULL) {
list_remove(&arc_prune_list, p);
refcount_remove(&p->p_refcnt, &arc_prune_list);
refcount_destroy(&p->p_refcnt);
kmem_free(p, sizeof (*p));
}
mutex_exit(&arc_prune_mtx);
list_destroy(&arc_prune_list);
mutex_destroy(&arc_prune_mtx);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
mutex_destroy(&arc_eviction_mtx);
mutex_destroy(&arc_reclaim_thr_lock);
cv_destroy(&arc_reclaim_thr_cv);
list_destroy(&arc_mru->arcs_list[ARC_BUFC_METADATA]);
list_destroy(&arc_mru_ghost->arcs_list[ARC_BUFC_METADATA]);
list_destroy(&arc_mfu->arcs_list[ARC_BUFC_METADATA]);
list_destroy(&arc_mfu_ghost->arcs_list[ARC_BUFC_METADATA]);
list_destroy(&arc_mru->arcs_list[ARC_BUFC_DATA]);
list_destroy(&arc_mru_ghost->arcs_list[ARC_BUFC_DATA]);
list_destroy(&arc_mfu->arcs_list[ARC_BUFC_DATA]);
list_destroy(&arc_mfu_ghost->arcs_list[ARC_BUFC_DATA]);
mutex_destroy(&arc_anon->arcs_mtx);
mutex_destroy(&arc_mru->arcs_mtx);
mutex_destroy(&arc_mru_ghost->arcs_mtx);
mutex_destroy(&arc_mfu->arcs_mtx);
mutex_destroy(&arc_mfu_ghost->arcs_mtx);
Rebase master to b105
2009-01-15 21:59:39 +00:00
mutex_destroy(&arc_l2c_only->arcs_mtx);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
mutex_destroy(&zfs_write_limit_lock);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
buf_fini();
Rebase master to b117
2009-07-02 22:44:48 +00:00
ASSERT(arc_loaned_bytes == 0);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
/*
* Level 2 ARC
*
* The level 2 ARC (L2ARC) is a cache layer in-between main memory and disk.
* It uses dedicated storage devices to hold cached data, which are populated
* using large infrequent writes. The main role of this cache is to boost
* the performance of random read workloads. The intended L2ARC devices
* include short-stroked disks, solid state disks, and other media with
* substantially faster read latency than disk.
*
* +-----------------------+
* | ARC |
* +-----------------------+
* | ^ ^
* | | |
* l2arc_feed_thread() arc_read()
* | | |
* | l2arc read |
* V | |
* +---------------+ |
* | L2ARC | |
* +---------------+ |
* | ^ |
* l2arc_write() | |
* | | |
* V | |
* +-------+ +-------+
* | vdev | | vdev |
* | cache | | cache |
* +-------+ +-------+
* +=========+ .-----.
* : L2ARC : |-_____-|
* : devices : | Disks |
* +=========+ `-_____-'
*
* Read requests are satisfied from the following sources, in order:
*
* 1) ARC
* 2) vdev cache of L2ARC devices
* 3) L2ARC devices
* 4) vdev cache of disks
* 5) disks
*
* Some L2ARC device types exhibit extremely slow write performance.
* To accommodate for this there are some significant differences between
* the L2ARC and traditional cache design:
*
* 1. There is no eviction path from the ARC to the L2ARC. Evictions from
* the ARC behave as usual, freeing buffers and placing headers on ghost
* lists. The ARC does not send buffers to the L2ARC during eviction as
* this would add inflated write latencies for all ARC memory pressure.
*
* 2. The L2ARC attempts to cache data from the ARC before it is evicted.
* It does this by periodically scanning buffers from the eviction-end of
* the MFU and MRU ARC lists, copying them to the L2ARC devices if they are
* not already there. It scans until a headroom of buffers is satisfied,
* which itself is a buffer for ARC eviction. The thread that does this is
* l2arc_feed_thread(), illustrated below; example sizes are included to
* provide a better sense of ratio than this diagram:
*
* head --> tail
* +---------------------+----------+
* ARC_mfu |:::::#:::::::::::::::|o#o###o###|-->. # already on L2ARC
* +---------------------+----------+ | o L2ARC eligible
* ARC_mru |:#:::::::::::::::::::|#o#ooo####|-->| : ARC buffer
* +---------------------+----------+ |
* 15.9 Gbytes ^ 32 Mbytes |
* headroom |
* l2arc_feed_thread()
* |
* l2arc write hand <--[oooo]--'
* | 8 Mbyte
* | write max
* V
* +==============================+
* L2ARC dev |####|#|###|###| |####| ... |
* +==============================+
* 32 Gbytes
*
* 3. If an ARC buffer is copied to the L2ARC but then hit instead of
* evicted, then the L2ARC has cached a buffer much sooner than it probably
* needed to, potentially wasting L2ARC device bandwidth and storage. It is
* safe to say that this is an uncommon case, since buffers at the end of
* the ARC lists have moved there due to inactivity.
*
* 4. If the ARC evicts faster than the L2ARC can maintain a headroom,
* then the L2ARC simply misses copying some buffers. This serves as a
* pressure valve to prevent heavy read workloads from both stalling the ARC
* with waits and clogging the L2ARC with writes. This also helps prevent
* the potential for the L2ARC to churn if it attempts to cache content too
* quickly, such as during backups of the entire pool.
*
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
* 5. After system boot and before the ARC has filled main memory, there are
* no evictions from the ARC and so the tails of the ARC_mfu and ARC_mru
* lists can remain mostly static. Instead of searching from tail of these
* lists as pictured, the l2arc_feed_thread() will search from the list heads
* for eligible buffers, greatly increasing its chance of finding them.
*
* The L2ARC device write speed is also boosted during this time so that
* the L2ARC warms up faster. Since there have been no ARC evictions yet,
* there are no L2ARC reads, and no fear of degrading read performance
* through increased writes.
*
* 6. Writes to the L2ARC devices are grouped and sent in-sequence, so that
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
* the vdev queue can aggregate them into larger and fewer writes. Each
* device is written to in a rotor fashion, sweeping writes through
* available space then repeating.
*
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
* 7. The L2ARC does not store dirty content. It never needs to flush
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
* write buffers back to disk based storage.
*
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
* 8. If an ARC buffer is written (and dirtied) which also exists in the
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
* L2ARC, the now stale L2ARC buffer is immediately dropped.
*
* The performance of the L2ARC can be tweaked by a number of tunables, which
* may be necessary for different workloads:
*
* l2arc_write_max max write bytes per interval
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
* l2arc_write_boost extra write bytes during device warmup
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
* l2arc_noprefetch skip caching prefetched buffers
* l2arc_headroom number of max device writes to precache
* l2arc_feed_secs seconds between L2ARC writing
*
* Tunables may be removed or added as future performance improvements are
* integrated, and also may become zpool properties.
Rebase master to b108
2009-02-18 20:51:31 +00:00
*
* There are three key functions that control how the L2ARC warms up:
*
* l2arc_write_eligible() check if a buffer is eligible to cache
* l2arc_write_size() calculate how much to write
* l2arc_write_interval() calculate sleep delay between writes
*
* These three functions determine what to write, how much, and how quickly
* to send writes.
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
*/
Rebase master to b108
2009-02-18 20:51:31 +00:00
static boolean_t
l2arc_write_eligible(uint64_t spa_guid, arc_buf_hdr_t *ab)
{
/*
* A buffer is *not* eligible for the L2ARC if it:
* 1. belongs to a different spa.
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
* 2. is already cached on the L2ARC.
* 3. has an I/O in progress (it may be an incomplete read).
* 4. is flagged not eligible (zfs property).
Rebase master to b108
2009-02-18 20:51:31 +00:00
*/
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (ab->b_spa != spa_guid || ab->b_l2hdr != NULL ||
Rebase master to b108
2009-02-18 20:51:31 +00:00
HDR_IO_IN_PROGRESS(ab) || !HDR_L2CACHE(ab))
return (B_FALSE);
return (B_TRUE);
}
static uint64_t
l2arc_write_size(l2arc_dev_t *dev)
{
uint64_t size;
size = dev->l2ad_write;
if (arc_warm == B_FALSE)
size += dev->l2ad_boost;
return (size);
}
static clock_t
l2arc_write_interval(clock_t began, uint64_t wanted, uint64_t wrote)
{
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
clock_t interval, next, now;
Rebase master to b108
2009-02-18 20:51:31 +00:00
/*
* If the ARC lists are busy, increase our write rate; if the
* lists are stale, idle back. This is achieved by checking
* how much we previously wrote - if it was more than half of
* what we wanted, schedule the next write much sooner.
*/
if (l2arc_feed_again && wrote > (wanted / 2))
interval = (hz * l2arc_feed_min_ms) / 1000;
else
interval = hz * l2arc_feed_secs;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
now = ddi_get_lbolt();
next = MAX(now, MIN(now + interval, began + interval));
Rebase master to b108
2009-02-18 20:51:31 +00:00
return (next);
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
static void
l2arc_hdr_stat_add(void)
{
ARCSTAT_INCR(arcstat_l2_hdr_size, HDR_SIZE + L2HDR_SIZE);
ARCSTAT_INCR(arcstat_hdr_size, -HDR_SIZE);
}
static void
l2arc_hdr_stat_remove(void)
{
ARCSTAT_INCR(arcstat_l2_hdr_size, -(HDR_SIZE + L2HDR_SIZE));
ARCSTAT_INCR(arcstat_hdr_size, HDR_SIZE);
}
/*
* Cycle through L2ARC devices. This is how L2ARC load balances.
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
* If a device is returned, this also returns holding the spa config lock.
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
*/
static l2arc_dev_t *
l2arc_dev_get_next(void)
{
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
l2arc_dev_t *first, *next = NULL;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
/*
* Lock out the removal of spas (spa_namespace_lock), then removal
* of cache devices (l2arc_dev_mtx). Once a device has been selected,
* both locks will be dropped and a spa config lock held instead.
*/
mutex_enter(&spa_namespace_lock);
mutex_enter(&l2arc_dev_mtx);
/* if there are no vdevs, there is nothing to do */
if (l2arc_ndev == 0)
goto out;
first = NULL;
next = l2arc_dev_last;
do {
/* loop around the list looking for a non-faulted vdev */
if (next == NULL) {
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
next = list_head(l2arc_dev_list);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
} else {
next = list_next(l2arc_dev_list, next);
if (next == NULL)
next = list_head(l2arc_dev_list);
}
/* if we have come back to the start, bail out */
if (first == NULL)
first = next;
else if (next == first)
break;
} while (vdev_is_dead(next->l2ad_vdev));
/* if we were unable to find any usable vdevs, return NULL */
if (vdev_is_dead(next->l2ad_vdev))
next = NULL;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
l2arc_dev_last = next;
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
out:
mutex_exit(&l2arc_dev_mtx);
/*
* Grab the config lock to prevent the 'next' device from being
* removed while we are writing to it.
*/
if (next != NULL)
spa_config_enter(next->l2ad_spa, SCL_L2ARC, next, RW_READER);
mutex_exit(&spa_namespace_lock);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
return (next);
}
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
/*
* Free buffers that were tagged for destruction.
*/
static void
Fix gcc invalid prototype warnings Gcc -Wall warn: 'invalid prototype' Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 16:52:41 +00:00
l2arc_do_free_on_write(void)
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
{
list_t *buflist;
l2arc_data_free_t *df, *df_prev;
mutex_enter(&l2arc_free_on_write_mtx);
buflist = l2arc_free_on_write;
for (df = list_tail(buflist); df; df = df_prev) {
df_prev = list_prev(buflist, df);
ASSERT(df->l2df_data != NULL);
ASSERT(df->l2df_func != NULL);
df->l2df_func(df->l2df_data, df->l2df_size);
list_remove(buflist, df);
kmem_free(df, sizeof (l2arc_data_free_t));
}
mutex_exit(&l2arc_free_on_write_mtx);
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* A write to a cache device has completed. Update all headers to allow
* reads from these buffers to begin.
*/
static void
l2arc_write_done(zio_t *zio)
{
l2arc_write_callback_t *cb;
l2arc_dev_t *dev;
list_t *buflist;
arc_buf_hdr_t *head, *ab, *ab_prev;
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
l2arc_buf_hdr_t *abl2;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
kmutex_t *hash_lock;
cb = zio->io_private;
ASSERT(cb != NULL);
dev = cb->l2wcb_dev;
ASSERT(dev != NULL);
head = cb->l2wcb_head;
ASSERT(head != NULL);
buflist = dev->l2ad_buflist;
ASSERT(buflist != NULL);
DTRACE_PROBE2(l2arc__iodone, zio_t *, zio,
l2arc_write_callback_t *, cb);
if (zio->io_error != 0)
ARCSTAT_BUMP(arcstat_l2_writes_error);
mutex_enter(&l2arc_buflist_mtx);
/*
* All writes completed, or an error was hit.
*/
for (ab = list_prev(buflist, head); ab; ab = ab_prev) {
ab_prev = list_prev(buflist, ab);
hash_lock = HDR_LOCK(ab);
if (!mutex_tryenter(hash_lock)) {
/*
* This buffer misses out. It may be in a stage
* of eviction. Its ARC_L2_WRITING flag will be
* left set, denying reads to this buffer.
*/
ARCSTAT_BUMP(arcstat_l2_writes_hdr_miss);
continue;
}
if (zio->io_error != 0) {
/*
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
* Error - drop L2ARC entry.
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
*/
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
list_remove(buflist, ab);
abl2 = ab->b_l2hdr;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ab->b_l2hdr = NULL;
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
kmem_free(abl2, sizeof (l2arc_buf_hdr_t));
ARCSTAT_INCR(arcstat_l2_size, -ab->b_size);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
/*
* Allow ARC to begin reads to this L2ARC entry.
*/
ab->b_flags &= ~ARC_L2_WRITING;
mutex_exit(hash_lock);
}
atomic_inc_64(&l2arc_writes_done);
list_remove(buflist, head);
kmem_cache_free(hdr_cache, head);
mutex_exit(&l2arc_buflist_mtx);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
l2arc_do_free_on_write();
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
kmem_free(cb, sizeof (l2arc_write_callback_t));
}
/*
* A read to a cache device completed. Validate buffer contents before
* handing over to the regular ARC routines.
*/
static void
l2arc_read_done(zio_t *zio)
{
l2arc_read_callback_t *cb;
arc_buf_hdr_t *hdr;
arc_buf_t *buf;
kmutex_t *hash_lock;
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
int equal;
ASSERT(zio->io_vd != NULL);
ASSERT(zio->io_flags & ZIO_FLAG_DONT_PROPAGATE);
spa_config_exit(zio->io_spa, SCL_L2ARC, zio->io_vd);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
cb = zio->io_private;
ASSERT(cb != NULL);
buf = cb->l2rcb_buf;
ASSERT(buf != NULL);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
hash_lock = HDR_LOCK(buf->b_hdr);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
mutex_enter(hash_lock);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
hdr = buf->b_hdr;
ASSERT3P(hash_lock, ==, HDR_LOCK(hdr));
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* Check this survived the L2ARC journey.
*/
equal = arc_cksum_equal(buf);
if (equal && zio->io_error == 0 && !HDR_L2_EVICTED(hdr)) {
mutex_exit(hash_lock);
zio->io_private = buf;
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
zio->io_bp_copy = cb->l2rcb_bp; /* XXX fix in L2ARC 2.0 */
zio->io_bp = &zio->io_bp_copy; /* XXX fix in L2ARC 2.0 */
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
arc_read_done(zio);
} else {
mutex_exit(hash_lock);
/*
* Buffer didn't survive caching. Increment stats and
* reissue to the original storage device.
*/
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
if (zio->io_error != 0) {
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ARCSTAT_BUMP(arcstat_l2_io_error);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
} else {
zio->io_error = EIO;
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
if (!equal)
ARCSTAT_BUMP(arcstat_l2_cksum_bad);
/*
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
* If there's no waiter, issue an async i/o to the primary
* storage now. If there *is* a waiter, the caller must
* issue the i/o in a context where it's OK to block.
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
*/
Rebase master to b108
2009-02-18 20:51:31 +00:00
if (zio->io_waiter == NULL) {
zio_t *pio = zio_unique_parent(zio);
ASSERT(!pio || pio->io_child_type == ZIO_CHILD_LOGICAL);
zio_nowait(zio_read(pio, cb->l2rcb_spa, &cb->l2rcb_bp,
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
buf->b_data, zio->io_size, arc_read_done, buf,
zio->io_priority, cb->l2rcb_flags, &cb->l2rcb_zb));
Rebase master to b108
2009-02-18 20:51:31 +00:00
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
kmem_free(cb, sizeof (l2arc_read_callback_t));
}
/*
* This is the list priority from which the L2ARC will search for pages to
* cache. This is used within loops (0..3) to cycle through lists in the
* desired order. This order can have a significant effect on cache
* performance.
*
* Currently the metadata lists are hit first, MFU then MRU, followed by
* the data lists. This function returns a locked list, and also returns
* the lock pointer.
*/
static list_t *
l2arc_list_locked(int list_num, kmutex_t **lock)
{
Fix gcc uninitialized variable warnings Gcc -Wall warn: 'uninitialized variable' Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 16:58:04 +00:00
list_t *list = NULL;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ASSERT(list_num >= 0 && list_num <= 3);
switch (list_num) {
case 0:
list = &arc_mfu->arcs_list[ARC_BUFC_METADATA];
*lock = &arc_mfu->arcs_mtx;
break;
case 1:
list = &arc_mru->arcs_list[ARC_BUFC_METADATA];
*lock = &arc_mru->arcs_mtx;
break;
case 2:
list = &arc_mfu->arcs_list[ARC_BUFC_DATA];
*lock = &arc_mfu->arcs_mtx;
break;
case 3:
list = &arc_mru->arcs_list[ARC_BUFC_DATA];
*lock = &arc_mru->arcs_mtx;
break;
}
ASSERT(!(MUTEX_HELD(*lock)));
mutex_enter(*lock);
return (list);
}
/*
* Evict buffers from the device write hand to the distance specified in
* bytes. This distance may span populated buffers, it may span nothing.
* This is clearing a region on the L2ARC device ready for writing.
* If the 'all' boolean is set, every buffer is evicted.
*/
static void
l2arc_evict(l2arc_dev_t *dev, uint64_t distance, boolean_t all)
{
list_t *buflist;
l2arc_buf_hdr_t *abl2;
arc_buf_hdr_t *ab, *ab_prev;
kmutex_t *hash_lock;
uint64_t taddr;
buflist = dev->l2ad_buflist;
if (buflist == NULL)
return;
if (!all && dev->l2ad_first) {
/*
* This is the first sweep through the device. There is
* nothing to evict.
*/
return;
}
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
if (dev->l2ad_hand >= (dev->l2ad_end - (2 * distance))) {
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* When nearing the end of the device, evict to the end
* before the device write hand jumps to the start.
*/
taddr = dev->l2ad_end;
} else {
taddr = dev->l2ad_hand + distance;
}
DTRACE_PROBE4(l2arc__evict, l2arc_dev_t *, dev, list_t *, buflist,
uint64_t, taddr, boolean_t, all);
top:
mutex_enter(&l2arc_buflist_mtx);
for (ab = list_tail(buflist); ab; ab = ab_prev) {
ab_prev = list_prev(buflist, ab);
hash_lock = HDR_LOCK(ab);
if (!mutex_tryenter(hash_lock)) {
/*
* Missed the hash lock. Retry.
*/
ARCSTAT_BUMP(arcstat_l2_evict_lock_retry);
mutex_exit(&l2arc_buflist_mtx);
mutex_enter(hash_lock);
mutex_exit(hash_lock);
goto top;
}
if (HDR_L2_WRITE_HEAD(ab)) {
/*
* We hit a write head node. Leave it for
* l2arc_write_done().
*/
list_remove(buflist, ab);
mutex_exit(hash_lock);
continue;
}
if (!all && ab->b_l2hdr != NULL &&
(ab->b_l2hdr->b_daddr > taddr ||
ab->b_l2hdr->b_daddr < dev->l2ad_hand)) {
/*
* We've evicted to the target address,
* or the end of the device.
*/
mutex_exit(hash_lock);
break;
}
if (HDR_FREE_IN_PROGRESS(ab)) {
/*
* Already on the path to destruction.
*/
mutex_exit(hash_lock);
continue;
}
if (ab->b_state == arc_l2c_only) {
ASSERT(!HDR_L2_READING(ab));
/*
* This doesn't exist in the ARC. Destroy.
* arc_hdr_destroy() will call list_remove()
* and decrement arcstat_l2_size.
*/
arc_change_state(arc_anon, ab, hash_lock);
arc_hdr_destroy(ab);
} else {
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
/*
* Invalidate issued or about to be issued
* reads, since we may be about to write
* over this location.
*/
if (HDR_L2_READING(ab)) {
ARCSTAT_BUMP(arcstat_l2_evict_reading);
ab->b_flags |= ARC_L2_EVICTED;
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* Tell ARC this no longer exists in L2ARC.
*/
if (ab->b_l2hdr != NULL) {
abl2 = ab->b_l2hdr;
ab->b_l2hdr = NULL;
kmem_free(abl2, sizeof (l2arc_buf_hdr_t));
ARCSTAT_INCR(arcstat_l2_size, -ab->b_size);
}
list_remove(buflist, ab);
/*
* This may have been leftover after a
* failed write.
*/
ab->b_flags &= ~ARC_L2_WRITING;
}
mutex_exit(hash_lock);
}
mutex_exit(&l2arc_buflist_mtx);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
vdev_space_update(dev->l2ad_vdev, -(taddr - dev->l2ad_evict), 0, 0);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
dev->l2ad_evict = taddr;
}
/*
* Find and write ARC buffers to the L2ARC device.
*
* An ARC_L2_WRITING flag is set so that the L2ARC buffers are not valid
* for reading until they have completed writing.
*/
Rebase master to b108
2009-02-18 20:51:31 +00:00
static uint64_t
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
l2arc_write_buffers(spa_t *spa, l2arc_dev_t *dev, uint64_t target_sz)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
{
arc_buf_hdr_t *ab, *ab_prev, *head;
l2arc_buf_hdr_t *hdrl2;
list_t *list;
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
uint64_t passed_sz, write_sz, buf_sz, headroom;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
void *buf_data;
Fix gcc uninitialized variable warnings Gcc -Wall warn: 'uninitialized variable' Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 16:58:04 +00:00
kmutex_t *hash_lock, *list_lock = NULL;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
boolean_t have_lock, full;
l2arc_write_callback_t *cb;
zio_t *pio, *wzio;
Illumos #1748: desire support for reguid in zfs Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com> Reviewed by: Alexander Eremin <alexander.eremin@nexenta.com> Reviewed by: Alexander Stetsenko <ams@nexenta.com> Approved by: Richard Lowe <richlowe@richlowe.net> References: https://www.illumos.org/issues/1748 This commit modifies the user to kernel space ioctl ABI. Extra care should be taken when updating to ensure both the kernel modules and utilities are updated. If only the user space component is updated both the 'zpool events' command and the 'zpool reguid' command will not work until the kernel modules are updated. Ported by: Martin Matuska <martin@matuska.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #665
2011-11-11 22:07:54 +00:00
uint64_t guid = spa_load_guid(spa);
Fix gcc c90 compliance warnings Fix non-c90 compliant code, for the most part these changes simply deal with where a particular variable is declared. Under c90 it must alway be done at the very start of a block. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 16:52:39 +00:00
int try;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ASSERT(dev->l2ad_vdev != NULL);
pio = NULL;
write_sz = 0;
full = B_FALSE;
head = kmem_cache_alloc(hdr_cache, KM_PUSHPAGE);
head->b_flags |= ARC_L2_WRITE_HEAD;
/*
* Copy buffers for L2ARC writing.
*/
mutex_enter(&l2arc_buflist_mtx);
Fix gcc c90 compliance warnings Fix non-c90 compliant code, for the most part these changes simply deal with where a particular variable is declared. Under c90 it must alway be done at the very start of a block. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 16:52:39 +00:00
for (try = 0; try <= 3; try++) {
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
list = l2arc_list_locked(try, &list_lock);
passed_sz = 0;
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
/*
* L2ARC fast warmup.
*
* Until the ARC is warm and starts to evict, read from the
* head of the ARC lists rather than the tail.
*/
headroom = target_sz * l2arc_headroom;
if (arc_warm == B_FALSE)
ab = list_head(list);
else
ab = list_tail(list);
for (; ab; ab = ab_prev) {
if (arc_warm == B_FALSE)
ab_prev = list_next(list, ab);
else
ab_prev = list_prev(list, ab);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
hash_lock = HDR_LOCK(ab);
have_lock = MUTEX_HELD(hash_lock);
if (!have_lock && !mutex_tryenter(hash_lock)) {
/*
* Skip this buffer rather than waiting.
*/
continue;
}
passed_sz += ab->b_size;
if (passed_sz > headroom) {
/*
* Searched too far.
*/
mutex_exit(hash_lock);
break;
}
Rebase master to b108
2009-02-18 20:51:31 +00:00
if (!l2arc_write_eligible(guid, ab)) {
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
mutex_exit(hash_lock);
continue;
}
if ((write_sz + ab->b_size) > target_sz) {
full = B_TRUE;
mutex_exit(hash_lock);
break;
}
if (pio == NULL) {
/*
* Insert a dummy header on the buflist so
* l2arc_write_done() can find where the
* write buffers begin without searching.
*/
list_insert_head(dev->l2ad_buflist, head);
Use KM_PUSHPAGE in l2arc_write_buffers There is potential for deadlock in the l2arc_feed thread if KM_PUSHPAGE is not used for the allocations made in l2arc_write_buffers. Specifically, if KM_PUSHPAGE is not used for these allocations, it is possible for reclaim to be triggered which can cause the l2arc_feed thread to deadlock itself on the ARC_mru mutex. An example of this is demonstrated in the following backtrace of the l2arc_feed thread: crash> bt 4123 PID: 4123 TASK: ffff88062f8c1500 CPU: 6 COMMAND: "l2arc_feed" 0 [ffff88062511d610] schedule at ffffffff814eeee0 1 [ffff88062511d6d8] __mutex_lock_slowpath at ffffffff814f057e 2 [ffff88062511d748] mutex_lock at ffffffff814f041b 3 [ffff88062511d768] arc_evict at ffffffffa05130ca [zfs] 4 [ffff88062511d858] arc_adjust at ffffffffa05139a9 [zfs] 5 [ffff88062511d878] arc_shrink at ffffffffa0513a95 [zfs] 6 [ffff88062511d898] arc_kmem_reap_now at ffffffffa0513be8 [zfs] 7 [ffff88062511d8c8] arc_shrinker_func at ffffffffa0513ccc [zfs] 8 [ffff88062511d8f8] shrink_slab at ffffffff8112a17a 9 [ffff88062511d958] do_try_to_free_pages at ffffffff8112bfdf 10 [ffff88062511d9e8] try_to_free_pages at ffffffff8112c3ed 11 [ffff88062511da98] __alloc_pages_nodemask at ffffffff8112431d 12 [ffff88062511dbb8] kmem_getpages at ffffffff8115e632 13 [ffff88062511dbe8] fallback_alloc at ffffffff8115f24a 14 [ffff88062511dc68] ____cache_alloc_node at ffffffff8115efc9 15 [ffff88062511dcc8] __kmalloc at ffffffff8115fbf9 16 [ffff88062511dd18] kmem_alloc_debug at ffffffffa047b8cb [spl] 17 [ffff88062511dda8] l2arc_feed_thread at ffffffffa0511e71 [zfs] 18 [ffff88062511dea8] thread_generic_wrapper at ffffffffa047d1a1 [spl] 19 [ffff88062511dee8] kthread at ffffffff81090a86 20 [ffff88062511df48] kernel_thread at ffffffff8100c14a Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-04-10 17:55:17 +00:00
cb = kmem_alloc(sizeof (l2arc_write_callback_t),
KM_PUSHPAGE);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
cb->l2wcb_dev = dev;
cb->l2wcb_head = head;
pio = zio_root(spa, l2arc_write_done, cb,
ZIO_FLAG_CANFAIL);
}
/*
* Create and add a new L2ARC header.
*/
Use KM_PUSHPAGE in l2arc_write_buffers There is potential for deadlock in the l2arc_feed thread if KM_PUSHPAGE is not used for the allocations made in l2arc_write_buffers. Specifically, if KM_PUSHPAGE is not used for these allocations, it is possible for reclaim to be triggered which can cause the l2arc_feed thread to deadlock itself on the ARC_mru mutex. An example of this is demonstrated in the following backtrace of the l2arc_feed thread: crash> bt 4123 PID: 4123 TASK: ffff88062f8c1500 CPU: 6 COMMAND: "l2arc_feed" 0 [ffff88062511d610] schedule at ffffffff814eeee0 1 [ffff88062511d6d8] __mutex_lock_slowpath at ffffffff814f057e 2 [ffff88062511d748] mutex_lock at ffffffff814f041b 3 [ffff88062511d768] arc_evict at ffffffffa05130ca [zfs] 4 [ffff88062511d858] arc_adjust at ffffffffa05139a9 [zfs] 5 [ffff88062511d878] arc_shrink at ffffffffa0513a95 [zfs] 6 [ffff88062511d898] arc_kmem_reap_now at ffffffffa0513be8 [zfs] 7 [ffff88062511d8c8] arc_shrinker_func at ffffffffa0513ccc [zfs] 8 [ffff88062511d8f8] shrink_slab at ffffffff8112a17a 9 [ffff88062511d958] do_try_to_free_pages at ffffffff8112bfdf 10 [ffff88062511d9e8] try_to_free_pages at ffffffff8112c3ed 11 [ffff88062511da98] __alloc_pages_nodemask at ffffffff8112431d 12 [ffff88062511dbb8] kmem_getpages at ffffffff8115e632 13 [ffff88062511dbe8] fallback_alloc at ffffffff8115f24a 14 [ffff88062511dc68] ____cache_alloc_node at ffffffff8115efc9 15 [ffff88062511dcc8] __kmalloc at ffffffff8115fbf9 16 [ffff88062511dd18] kmem_alloc_debug at ffffffffa047b8cb [spl] 17 [ffff88062511dda8] l2arc_feed_thread at ffffffffa0511e71 [zfs] 18 [ffff88062511dea8] thread_generic_wrapper at ffffffffa047d1a1 [spl] 19 [ffff88062511dee8] kthread at ffffffff81090a86 20 [ffff88062511df48] kernel_thread at ffffffff8100c14a Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-04-10 17:55:17 +00:00
hdrl2 = kmem_zalloc(sizeof (l2arc_buf_hdr_t),
KM_PUSHPAGE);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
hdrl2->b_dev = dev;
hdrl2->b_daddr = dev->l2ad_hand;
ab->b_flags |= ARC_L2_WRITING;
ab->b_l2hdr = hdrl2;
list_insert_head(dev->l2ad_buflist, ab);
buf_data = ab->b_buf->b_data;
buf_sz = ab->b_size;
/*
* Compute and store the buffer cksum before
* writing. On debug the cksum is verified first.
*/
arc_cksum_verify(ab->b_buf);
arc_cksum_compute(ab->b_buf, B_TRUE);
mutex_exit(hash_lock);
wzio = zio_write_phys(pio, dev->l2ad_vdev,
dev->l2ad_hand, buf_sz, buf_data, ZIO_CHECKSUM_OFF,
NULL, NULL, ZIO_PRIORITY_ASYNC_WRITE,
ZIO_FLAG_CANFAIL, B_FALSE);
DTRACE_PROBE2(l2arc__write, vdev_t *, dev->l2ad_vdev,
zio_t *, wzio);
(void) zio_nowait(wzio);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
/*
* Keep the clock hand suitably device-aligned.
*/
buf_sz = vdev_psize_to_asize(dev->l2ad_vdev, buf_sz);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
write_sz += buf_sz;
dev->l2ad_hand += buf_sz;
}
mutex_exit(list_lock);
if (full == B_TRUE)
break;
}
mutex_exit(&l2arc_buflist_mtx);
if (pio == NULL) {
ASSERT3U(write_sz, ==, 0);
kmem_cache_free(hdr_cache, head);
Rebase master to b108
2009-02-18 20:51:31 +00:00
return (0);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
ASSERT3U(write_sz, <=, target_sz);
ARCSTAT_BUMP(arcstat_l2_writes_sent);
Rebase master to b108
2009-02-18 20:51:31 +00:00
ARCSTAT_INCR(arcstat_l2_write_bytes, write_sz);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ARCSTAT_INCR(arcstat_l2_size, write_sz);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
vdev_space_update(dev->l2ad_vdev, write_sz, 0, 0);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* Bump device hand to the device start if it is approaching the end.
* l2arc_evict() will already have evicted ahead for this case.
*/
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
if (dev->l2ad_hand >= (dev->l2ad_end - target_sz)) {
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
vdev_space_update(dev->l2ad_vdev,
dev->l2ad_end - dev->l2ad_hand, 0, 0);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
dev->l2ad_hand = dev->l2ad_start;
dev->l2ad_evict = dev->l2ad_start;
dev->l2ad_first = B_FALSE;
}
Rebase master to b108
2009-02-18 20:51:31 +00:00
dev->l2ad_writing = B_TRUE;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
(void) zio_wait(pio);
Rebase master to b108
2009-02-18 20:51:31 +00:00
dev->l2ad_writing = B_FALSE;
return (write_sz);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
/*
* This thread feeds the L2ARC at regular intervals. This is the beating
* heart of the L2ARC.
*/
static void
l2arc_feed_thread(void)
{
callb_cpr_t cpr;
l2arc_dev_t *dev;
spa_t *spa;
Rebase master to b108
2009-02-18 20:51:31 +00:00
uint64_t size, wrote;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
clock_t begin, next = ddi_get_lbolt();
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
CALLB_CPR_INIT(&cpr, &l2arc_feed_thr_lock, callb_generic_cpr, FTAG);
mutex_enter(&l2arc_feed_thr_lock);
while (l2arc_thread_exit == 0) {
CALLB_CPR_SAFE_BEGIN(&cpr);
Use cv_timedwait_interruptible in arc The issue is that cv_timedwait() sleeps uninterruptibly to block signals and avoid waking up early. Under Linux this counts against the load average keeping it artificially high. This change allows the arc to sleep interruptibly which mean it may be woken up early due to a signal. Normally this means some extra care must be taken to handle a potential signal. But for the arcs usage of cv_timedwait() there is no harm in waking up before the timeout expires so no extra handling is required.
2010-12-10 20:00:00 +00:00
(void) cv_timedwait_interruptible(&l2arc_feed_thr_cv,
&l2arc_feed_thr_lock, next);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
CALLB_CPR_SAFE_END(&cpr, &l2arc_feed_thr_lock);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
next = ddi_get_lbolt() + hz;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
* Quick check for L2ARC devices.
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
*/
mutex_enter(&l2arc_dev_mtx);
if (l2arc_ndev == 0) {
mutex_exit(&l2arc_dev_mtx);
continue;
}
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
mutex_exit(&l2arc_dev_mtx);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
begin = ddi_get_lbolt();
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
* This selects the next l2arc device to write to, and in
* doing so the next spa to feed from: dev->l2ad_spa. This
* will return NULL if there are now no l2arc devices or if
* they are all faulted.
*
* If a device is returned, its spa's config lock is also
* held to prevent device removal. l2arc_dev_get_next()
* will grab and release l2arc_dev_mtx.
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
*/
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
if ((dev = l2arc_dev_get_next()) == NULL)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
continue;
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
spa = dev->l2ad_spa;
ASSERT(spa != NULL);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
/*
* If the pool is read-only then force the feed thread to
* sleep a little longer.
*/
if (!spa_writeable(spa)) {
next = ddi_get_lbolt() + 5 * l2arc_feed_secs * hz;
spa_config_exit(spa, SCL_L2ARC, dev);
continue;
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
* Avoid contributing to memory pressure.
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
*/
Integrate ARC more tightly with Linux Under Solaris the ARC was designed to stay one step ahead of the VM subsystem. It would attempt to recognize low memory situtions before they occured and evict data from the cache. It would also make assessments about if there was enough free memory to perform a specific operation. This was all possible because Solaris exposes a fairly decent view of the memory state of the system to other kernel threads. Linux on the other hand does not make this information easily available. To avoid extensive modifications to the ARC the SPL attempts to provide these same interfaces. While this works it is not ideal and problems can arise when the ARC and Linux have different ideas about when your out of memory. This has manifested itself in the past as a spinning arc_reclaim_thread. This patch abandons the emulated Solaris interfaces in favor of the prefered Linux interface. That means moving the bulk of the memory reclaim logic out of the arc_reclaim_thread and in to the evict driven shrinker callback. The Linux VM will call this function when it needs memory. The ARC is then responsible for attempting to free the requested amount of memory if possible. Several interfaces have been modified to accomidate this approach, however the basic user space implementation remains the same. The following changes almost exclusively just apply to the kernel implementation. * Removed the hdr_recl() reclaim callback which is redundant with the broader arc_shrinker_func(). * Reduced arc_grow_retry to 5 seconds from 60. This is now used internally in the ARC with arc_no_grow to indicate that direct reclaim was recently performed. This typically indicates a rapid change in memory demands which the kswapd threads were unable to keep ahead of. As long as direct reclaim is happening once every 5 seconds arc growth will be paused to avoid further contributing to the existing memory pressure. The more common indirect reclaim paths will not set arc_no_grow. * arc_shrink() has been extended to take the number of bytes by which arc_c should be reduced. This allows for a more granual reduction of the arc target. Since the kernel provides a reclaim value to the arc_shrinker_func() this value is used instead of 1<<arc_shrink_shift. * arc_reclaim_needed() has been removed. It was used to determine if the system was under memory pressure and relied extensively on Solaris specific VM interfaces. In most case the new code just checks arc_no_grow which indicates that within the last arc_grow_retry seconds direct memory reclaim occurred. * arc_memory_throttle() has been updated to always include the amount of evictable memory (arc and page cache) in its free space calculations. This space is largely available in most call paths due to direct memory reclaim. * The Solaris pageout code was also removed to avoid confusion. It has always been disabled due to proc_pageout being defined as NULL in the Linux port. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-13 21:29:16 +00:00
if (arc_no_grow) {
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
ARCSTAT_BUMP(arcstat_l2_abort_lowmem);
spa_config_exit(spa, SCL_L2ARC, dev);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
continue;
}
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ARCSTAT_BUMP(arcstat_l2_feeds);
Rebase master to b108
2009-02-18 20:51:31 +00:00
size = l2arc_write_size(dev);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* Evict L2ARC buffers that will be overwritten.
*/
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
l2arc_evict(dev, size, B_FALSE);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* Write ARC buffers.
*/
Rebase master to b108
2009-02-18 20:51:31 +00:00
wrote = l2arc_write_buffers(spa, dev, size);
/*
* Calculate interval between writes.
*/
next = l2arc_write_interval(begin, size, wrote);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
spa_config_exit(spa, SCL_L2ARC, dev);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
l2arc_thread_exit = 0;
cv_broadcast(&l2arc_feed_thr_cv);
CALLB_CPR_EXIT(&cpr); /* drops l2arc_feed_thr_lock */
thread_exit();
}
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
boolean_t
l2arc_vdev_present(vdev_t *vd)
{
l2arc_dev_t *dev;
mutex_enter(&l2arc_dev_mtx);
for (dev = list_head(l2arc_dev_list); dev != NULL;
dev = list_next(l2arc_dev_list, dev)) {
if (dev->l2ad_vdev == vd)
break;
}
mutex_exit(&l2arc_dev_mtx);
return (dev != NULL);
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* Add a vdev for use by the L2ARC. By this point the spa has already
* validated the vdev and opened it.
*/
void
Rebase master to b117
2009-07-02 22:44:48 +00:00
l2arc_add_vdev(spa_t *spa, vdev_t *vd)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
{
l2arc_dev_t *adddev;
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
ASSERT(!l2arc_vdev_present(vd));
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* Create a new l2arc device entry.
*/
adddev = kmem_zalloc(sizeof (l2arc_dev_t), KM_SLEEP);
adddev->l2ad_spa = spa;
adddev->l2ad_vdev = vd;
adddev->l2ad_write = l2arc_write_max;
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
adddev->l2ad_boost = l2arc_write_boost;
Rebase master to b117
2009-07-02 22:44:48 +00:00
adddev->l2ad_start = VDEV_LABEL_START_SIZE;
adddev->l2ad_end = VDEV_LABEL_START_SIZE + vdev_get_min_asize(vd);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
adddev->l2ad_hand = adddev->l2ad_start;
adddev->l2ad_evict = adddev->l2ad_start;
adddev->l2ad_first = B_TRUE;
Rebase master to b108
2009-02-18 20:51:31 +00:00
adddev->l2ad_writing = B_FALSE;
Fix list handling to only use the API Remove all instances of list handling where the API is not used and instead list data members are directly accessed. Doing this sort of thing is bad for portability. Additionally, ensure that list_link_init() is called on newly created list nodes. This ensures the node is properly initialized and does not rely on the assumption that zero'ing the list_node_t via kmem_zalloc() is the same as proper initialization. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 17:26:44 +00:00
list_link_init(&adddev->l2ad_node);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ASSERT3U(adddev->l2ad_write, >, 0);
/*
* This is a list of all ARC buffers that are still valid on the
* device.
*/
adddev->l2ad_buflist = kmem_zalloc(sizeof (list_t), KM_SLEEP);
list_create(adddev->l2ad_buflist, sizeof (arc_buf_hdr_t),
offsetof(arc_buf_hdr_t, b_l2node));
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
vdev_space_update(vd, 0, 0, adddev->l2ad_end - adddev->l2ad_hand);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* Add device to global list
*/
mutex_enter(&l2arc_dev_mtx);
list_insert_head(l2arc_dev_list, adddev);
atomic_inc_64(&l2arc_ndev);
mutex_exit(&l2arc_dev_mtx);
}
/*
* Remove a vdev from the L2ARC.
*/
void
l2arc_remove_vdev(vdev_t *vd)
{
l2arc_dev_t *dev, *nextdev, *remdev = NULL;
/*
* Find the device by vdev
*/
mutex_enter(&l2arc_dev_mtx);
for (dev = list_head(l2arc_dev_list); dev; dev = nextdev) {
nextdev = list_next(l2arc_dev_list, dev);
if (vd == dev->l2ad_vdev) {
remdev = dev;
break;
}
}
ASSERT(remdev != NULL);
/*
* Remove device from global list
*/
list_remove(l2arc_dev_list, remdev);
l2arc_dev_last = NULL; /* may have been invalidated */
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
atomic_dec_64(&l2arc_ndev);
mutex_exit(&l2arc_dev_mtx);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* Clear all buflists and ARC references. L2ARC device flush.
*/
l2arc_evict(remdev, 0, B_TRUE);
list_destroy(remdev->l2ad_buflist);
kmem_free(remdev->l2ad_buflist, sizeof (list_t));
kmem_free(remdev, sizeof (l2arc_dev_t));
}
void
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
l2arc_init(void)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
{
l2arc_thread_exit = 0;
l2arc_ndev = 0;
l2arc_writes_sent = 0;
l2arc_writes_done = 0;
mutex_init(&l2arc_feed_thr_lock, NULL, MUTEX_DEFAULT, NULL);
cv_init(&l2arc_feed_thr_cv, NULL, CV_DEFAULT, NULL);
mutex_init(&l2arc_dev_mtx, NULL, MUTEX_DEFAULT, NULL);
mutex_init(&l2arc_buflist_mtx, NULL, MUTEX_DEFAULT, NULL);
mutex_init(&l2arc_free_on_write_mtx, NULL, MUTEX_DEFAULT, NULL);
l2arc_dev_list = &L2ARC_dev_list;
l2arc_free_on_write = &L2ARC_free_on_write;
list_create(l2arc_dev_list, sizeof (l2arc_dev_t),
offsetof(l2arc_dev_t, l2ad_node));
list_create(l2arc_free_on_write, sizeof (l2arc_data_free_t),
offsetof(l2arc_data_free_t, l2df_list_node));
}
void
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
l2arc_fini(void)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
{
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
/*
* This is called from dmu_fini(), which is called from spa_fini();
* Because of this, we can assume that all l2arc devices have
* already been removed when the pools themselves were removed.
*/
l2arc_do_free_on_write();
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
mutex_destroy(&l2arc_feed_thr_lock);
cv_destroy(&l2arc_feed_thr_cv);
mutex_destroy(&l2arc_dev_mtx);
mutex_destroy(&l2arc_buflist_mtx);
mutex_destroy(&l2arc_free_on_write_mtx);
list_destroy(l2arc_dev_list);
list_destroy(l2arc_free_on_write);
}
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
void
l2arc_start(void)
{
Rebase master to b105
2009-01-15 21:59:39 +00:00
if (!(spa_mode_global & FWRITE))
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
return;
(void) thread_create(NULL, 0, l2arc_feed_thread, NULL, 0, &p0,
TS_RUN, minclsyspri);
}
void
l2arc_stop(void)
{
Rebase master to b105
2009-01-15 21:59:39 +00:00
if (!(spa_mode_global & FWRITE))
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
return;
mutex_enter(&l2arc_feed_thr_lock);
cv_signal(&l2arc_feed_thr_cv); /* kick thread out of startup */
l2arc_thread_exit = 1;
while (l2arc_thread_exit != 0)
cv_wait(&l2arc_feed_thr_cv, &l2arc_feed_thr_lock);
mutex_exit(&l2arc_feed_thr_lock);
}
Add linux kernel module support Setup linux kernel module support, this includes: - zfs context for kernel/user - kernel module build system integration - kernel module macros - kernel module symbol export - kernel module options Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:49:16 +00:00
#if defined(_KERNEL) && defined(HAVE_SPL)
EXPORT_SYMBOL(arc_read);
EXPORT_SYMBOL(arc_buf_remove_ref);
EXPORT_SYMBOL(arc_getbuf_func);
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
EXPORT_SYMBOL(arc_add_prune_callback);
EXPORT_SYMBOL(arc_remove_prune_callback);
Add linux kernel module support Setup linux kernel module support, this includes: - zfs context for kernel/user - kernel module build system integration - kernel module macros - kernel module symbol export - kernel module options Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:49:16 +00:00
Add missing ZFS tunables This commit adds module options for all existing zfs tunables. Ideally the average user should never need to modify any of these values. However, in practice sometimes you do need to tweak these values for one reason or another. In those cases it's nice not to have to resort to rebuilding from source. All tunables are visable to modinfo and the list is as follows: $ modinfo module/zfs/zfs.ko filename: module/zfs/zfs.ko license: CDDL author: Sun Microsystems/Oracle, Lawrence Livermore National Laboratory description: ZFS srcversion: 8EAB1D71DACE05B5AA61567 depends: spl,znvpair,zcommon,zunicode,zavl vermagic: 2.6.32-131.0.5.el6.x86_64 SMP mod_unload modversions parm: zvol_major:Major number for zvol device (uint) parm: zvol_threads:Number of threads for zvol device (uint) parm: zio_injection_enabled:Enable fault injection (int) parm: zio_bulk_flags:Additional flags to pass to bulk buffers (int) parm: zio_delay_max:Max zio millisec delay before posting event (int) parm: zio_requeue_io_start_cut_in_line:Prioritize requeued I/O (bool) parm: zil_replay_disable:Disable intent logging replay (int) parm: zfs_nocacheflush:Disable cache flushes (bool) parm: zfs_read_chunk_size:Bytes to read per chunk (long) parm: zfs_vdev_max_pending:Max pending per-vdev I/Os (int) parm: zfs_vdev_min_pending:Min pending per-vdev I/Os (int) parm: zfs_vdev_aggregation_limit:Max vdev I/O aggregation size (int) parm: zfs_vdev_time_shift:Deadline time shift for vdev I/O (int) parm: zfs_vdev_ramp_rate:Exponential I/O issue ramp-up rate (int) parm: zfs_vdev_read_gap_limit:Aggregate read I/O over gap (int) parm: zfs_vdev_write_gap_limit:Aggregate write I/O over gap (int) parm: zfs_vdev_scheduler:I/O scheduler (charp) parm: zfs_vdev_cache_max:Inflate reads small than max (int) parm: zfs_vdev_cache_size:Total size of the per-disk cache (int) parm: zfs_vdev_cache_bshift:Shift size to inflate reads too (int) parm: zfs_scrub_limit:Max scrub/resilver I/O per leaf vdev (int) parm: zfs_recover:Set to attempt to recover from fatal errors (int) parm: spa_config_path:SPA config file (/etc/zfs/zpool.cache) (charp) parm: zfs_zevent_len_max:Max event queue length (int) parm: zfs_zevent_cols:Max event column width (int) parm: zfs_zevent_console:Log events to the console (int) parm: zfs_top_maxinflight:Max I/Os per top-level (int) parm: zfs_resilver_delay:Number of ticks to delay resilver (int) parm: zfs_scrub_delay:Number of ticks to delay scrub (int) parm: zfs_scan_idle:Idle window in clock ticks (int) parm: zfs_scan_min_time_ms:Min millisecs to scrub per txg (int) parm: zfs_free_min_time_ms:Min millisecs to free per txg (int) parm: zfs_resilver_min_time_ms:Min millisecs to resilver per txg (int) parm: zfs_no_scrub_io:Set to disable scrub I/O (bool) parm: zfs_no_scrub_prefetch:Set to disable scrub prefetching (bool) parm: zfs_txg_timeout:Max seconds worth of delta per txg (int) parm: zfs_no_write_throttle:Disable write throttling (int) parm: zfs_write_limit_shift:log2(fraction of memory) per txg (int) parm: zfs_txg_synctime_ms:Target milliseconds between tgx sync (int) parm: zfs_write_limit_min:Min tgx write limit (ulong) parm: zfs_write_limit_max:Max tgx write limit (ulong) parm: zfs_write_limit_inflated:Inflated tgx write limit (ulong) parm: zfs_write_limit_override:Override tgx write limit (ulong) parm: zfs_prefetch_disable:Disable all ZFS prefetching (int) parm: zfetch_max_streams:Max number of streams per zfetch (uint) parm: zfetch_min_sec_reap:Min time before stream reclaim (uint) parm: zfetch_block_cap:Max number of blocks to fetch at a time (uint) parm: zfetch_array_rd_sz:Number of bytes in a array_read (ulong) parm: zfs_pd_blks_max:Max number of blocks to prefetch (int) parm: zfs_dedup_prefetch:Enable prefetching dedup-ed blks (int) parm: zfs_arc_min:Min arc size (ulong) parm: zfs_arc_max:Max arc size (ulong) parm: zfs_arc_meta_limit:Meta limit for arc size (ulong) parm: zfs_arc_reduce_dnlc_percent:Meta reclaim percentage (int) parm: zfs_arc_grow_retry:Seconds before growing arc size (int) parm: zfs_arc_shrink_shift:log2(fraction of arc to reclaim) (int) parm: zfs_arc_p_min_shift:arc_c shift to calc min/max arc_p (int)
2011-05-03 22:09:28 +00:00
module_param(zfs_arc_min, ulong, 0444);
MODULE_PARM_DESC(zfs_arc_min, "Min arc size");
Add linux kernel module support Setup linux kernel module support, this includes: - zfs context for kernel/user - kernel module build system integration - kernel module macros - kernel module symbol export - kernel module options Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:49:16 +00:00
Add missing ZFS tunables This commit adds module options for all existing zfs tunables. Ideally the average user should never need to modify any of these values. However, in practice sometimes you do need to tweak these values for one reason or another. In those cases it's nice not to have to resort to rebuilding from source. All tunables are visable to modinfo and the list is as follows: $ modinfo module/zfs/zfs.ko filename: module/zfs/zfs.ko license: CDDL author: Sun Microsystems/Oracle, Lawrence Livermore National Laboratory description: ZFS srcversion: 8EAB1D71DACE05B5AA61567 depends: spl,znvpair,zcommon,zunicode,zavl vermagic: 2.6.32-131.0.5.el6.x86_64 SMP mod_unload modversions parm: zvol_major:Major number for zvol device (uint) parm: zvol_threads:Number of threads for zvol device (uint) parm: zio_injection_enabled:Enable fault injection (int) parm: zio_bulk_flags:Additional flags to pass to bulk buffers (int) parm: zio_delay_max:Max zio millisec delay before posting event (int) parm: zio_requeue_io_start_cut_in_line:Prioritize requeued I/O (bool) parm: zil_replay_disable:Disable intent logging replay (int) parm: zfs_nocacheflush:Disable cache flushes (bool) parm: zfs_read_chunk_size:Bytes to read per chunk (long) parm: zfs_vdev_max_pending:Max pending per-vdev I/Os (int) parm: zfs_vdev_min_pending:Min pending per-vdev I/Os (int) parm: zfs_vdev_aggregation_limit:Max vdev I/O aggregation size (int) parm: zfs_vdev_time_shift:Deadline time shift for vdev I/O (int) parm: zfs_vdev_ramp_rate:Exponential I/O issue ramp-up rate (int) parm: zfs_vdev_read_gap_limit:Aggregate read I/O over gap (int) parm: zfs_vdev_write_gap_limit:Aggregate write I/O over gap (int) parm: zfs_vdev_scheduler:I/O scheduler (charp) parm: zfs_vdev_cache_max:Inflate reads small than max (int) parm: zfs_vdev_cache_size:Total size of the per-disk cache (int) parm: zfs_vdev_cache_bshift:Shift size to inflate reads too (int) parm: zfs_scrub_limit:Max scrub/resilver I/O per leaf vdev (int) parm: zfs_recover:Set to attempt to recover from fatal errors (int) parm: spa_config_path:SPA config file (/etc/zfs/zpool.cache) (charp) parm: zfs_zevent_len_max:Max event queue length (int) parm: zfs_zevent_cols:Max event column width (int) parm: zfs_zevent_console:Log events to the console (int) parm: zfs_top_maxinflight:Max I/Os per top-level (int) parm: zfs_resilver_delay:Number of ticks to delay resilver (int) parm: zfs_scrub_delay:Number of ticks to delay scrub (int) parm: zfs_scan_idle:Idle window in clock ticks (int) parm: zfs_scan_min_time_ms:Min millisecs to scrub per txg (int) parm: zfs_free_min_time_ms:Min millisecs to free per txg (int) parm: zfs_resilver_min_time_ms:Min millisecs to resilver per txg (int) parm: zfs_no_scrub_io:Set to disable scrub I/O (bool) parm: zfs_no_scrub_prefetch:Set to disable scrub prefetching (bool) parm: zfs_txg_timeout:Max seconds worth of delta per txg (int) parm: zfs_no_write_throttle:Disable write throttling (int) parm: zfs_write_limit_shift:log2(fraction of memory) per txg (int) parm: zfs_txg_synctime_ms:Target milliseconds between tgx sync (int) parm: zfs_write_limit_min:Min tgx write limit (ulong) parm: zfs_write_limit_max:Max tgx write limit (ulong) parm: zfs_write_limit_inflated:Inflated tgx write limit (ulong) parm: zfs_write_limit_override:Override tgx write limit (ulong) parm: zfs_prefetch_disable:Disable all ZFS prefetching (int) parm: zfetch_max_streams:Max number of streams per zfetch (uint) parm: zfetch_min_sec_reap:Min time before stream reclaim (uint) parm: zfetch_block_cap:Max number of blocks to fetch at a time (uint) parm: zfetch_array_rd_sz:Number of bytes in a array_read (ulong) parm: zfs_pd_blks_max:Max number of blocks to prefetch (int) parm: zfs_dedup_prefetch:Enable prefetching dedup-ed blks (int) parm: zfs_arc_min:Min arc size (ulong) parm: zfs_arc_max:Max arc size (ulong) parm: zfs_arc_meta_limit:Meta limit for arc size (ulong) parm: zfs_arc_reduce_dnlc_percent:Meta reclaim percentage (int) parm: zfs_arc_grow_retry:Seconds before growing arc size (int) parm: zfs_arc_shrink_shift:log2(fraction of arc to reclaim) (int) parm: zfs_arc_p_min_shift:arc_c shift to calc min/max arc_p (int)
2011-05-03 22:09:28 +00:00
module_param(zfs_arc_max, ulong, 0444);
MODULE_PARM_DESC(zfs_arc_max, "Max arc size");
Add linux kernel module support Setup linux kernel module support, this includes: - zfs context for kernel/user - kernel module build system integration - kernel module macros - kernel module symbol export - kernel module options Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:49:16 +00:00
Add missing ZFS tunables This commit adds module options for all existing zfs tunables. Ideally the average user should never need to modify any of these values. However, in practice sometimes you do need to tweak these values for one reason or another. In those cases it's nice not to have to resort to rebuilding from source. All tunables are visable to modinfo and the list is as follows: $ modinfo module/zfs/zfs.ko filename: module/zfs/zfs.ko license: CDDL author: Sun Microsystems/Oracle, Lawrence Livermore National Laboratory description: ZFS srcversion: 8EAB1D71DACE05B5AA61567 depends: spl,znvpair,zcommon,zunicode,zavl vermagic: 2.6.32-131.0.5.el6.x86_64 SMP mod_unload modversions parm: zvol_major:Major number for zvol device (uint) parm: zvol_threads:Number of threads for zvol device (uint) parm: zio_injection_enabled:Enable fault injection (int) parm: zio_bulk_flags:Additional flags to pass to bulk buffers (int) parm: zio_delay_max:Max zio millisec delay before posting event (int) parm: zio_requeue_io_start_cut_in_line:Prioritize requeued I/O (bool) parm: zil_replay_disable:Disable intent logging replay (int) parm: zfs_nocacheflush:Disable cache flushes (bool) parm: zfs_read_chunk_size:Bytes to read per chunk (long) parm: zfs_vdev_max_pending:Max pending per-vdev I/Os (int) parm: zfs_vdev_min_pending:Min pending per-vdev I/Os (int) parm: zfs_vdev_aggregation_limit:Max vdev I/O aggregation size (int) parm: zfs_vdev_time_shift:Deadline time shift for vdev I/O (int) parm: zfs_vdev_ramp_rate:Exponential I/O issue ramp-up rate (int) parm: zfs_vdev_read_gap_limit:Aggregate read I/O over gap (int) parm: zfs_vdev_write_gap_limit:Aggregate write I/O over gap (int) parm: zfs_vdev_scheduler:I/O scheduler (charp) parm: zfs_vdev_cache_max:Inflate reads small than max (int) parm: zfs_vdev_cache_size:Total size of the per-disk cache (int) parm: zfs_vdev_cache_bshift:Shift size to inflate reads too (int) parm: zfs_scrub_limit:Max scrub/resilver I/O per leaf vdev (int) parm: zfs_recover:Set to attempt to recover from fatal errors (int) parm: spa_config_path:SPA config file (/etc/zfs/zpool.cache) (charp) parm: zfs_zevent_len_max:Max event queue length (int) parm: zfs_zevent_cols:Max event column width (int) parm: zfs_zevent_console:Log events to the console (int) parm: zfs_top_maxinflight:Max I/Os per top-level (int) parm: zfs_resilver_delay:Number of ticks to delay resilver (int) parm: zfs_scrub_delay:Number of ticks to delay scrub (int) parm: zfs_scan_idle:Idle window in clock ticks (int) parm: zfs_scan_min_time_ms:Min millisecs to scrub per txg (int) parm: zfs_free_min_time_ms:Min millisecs to free per txg (int) parm: zfs_resilver_min_time_ms:Min millisecs to resilver per txg (int) parm: zfs_no_scrub_io:Set to disable scrub I/O (bool) parm: zfs_no_scrub_prefetch:Set to disable scrub prefetching (bool) parm: zfs_txg_timeout:Max seconds worth of delta per txg (int) parm: zfs_no_write_throttle:Disable write throttling (int) parm: zfs_write_limit_shift:log2(fraction of memory) per txg (int) parm: zfs_txg_synctime_ms:Target milliseconds between tgx sync (int) parm: zfs_write_limit_min:Min tgx write limit (ulong) parm: zfs_write_limit_max:Max tgx write limit (ulong) parm: zfs_write_limit_inflated:Inflated tgx write limit (ulong) parm: zfs_write_limit_override:Override tgx write limit (ulong) parm: zfs_prefetch_disable:Disable all ZFS prefetching (int) parm: zfetch_max_streams:Max number of streams per zfetch (uint) parm: zfetch_min_sec_reap:Min time before stream reclaim (uint) parm: zfetch_block_cap:Max number of blocks to fetch at a time (uint) parm: zfetch_array_rd_sz:Number of bytes in a array_read (ulong) parm: zfs_pd_blks_max:Max number of blocks to prefetch (int) parm: zfs_dedup_prefetch:Enable prefetching dedup-ed blks (int) parm: zfs_arc_min:Min arc size (ulong) parm: zfs_arc_max:Max arc size (ulong) parm: zfs_arc_meta_limit:Meta limit for arc size (ulong) parm: zfs_arc_reduce_dnlc_percent:Meta reclaim percentage (int) parm: zfs_arc_grow_retry:Seconds before growing arc size (int) parm: zfs_arc_shrink_shift:log2(fraction of arc to reclaim) (int) parm: zfs_arc_p_min_shift:arc_c shift to calc min/max arc_p (int)
2011-05-03 22:09:28 +00:00
module_param(zfs_arc_meta_limit, ulong, 0444);
Add linux kernel module support Setup linux kernel module support, this includes: - zfs context for kernel/user - kernel module build system integration - kernel module macros - kernel module symbol export - kernel module options Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:49:16 +00:00
MODULE_PARM_DESC(zfs_arc_meta_limit, "Meta limit for arc size");
Enforce ARC meta-data limits This change ensures the ARC meta-data limits are enforced. Without this enforcement meta-data can grow to consume all of the ARC cache pushing out data and hurting performance. The cache is aggressively reclaimed but this is a soft and not a hard limit. The cache may exceed the set limit briefly before being brought under control. By default 25% of the ARC capacity can be used for meta-data. This limit can be tuned by setting the 'zfs_arc_meta_limit' module option. Once this limit is exceeded meta-data reclaim will occur in 3 percent chunks, or may be tuned using 'arc_reduce_dnlc_percent'. Closes #193
2011-03-31 01:59:17 +00:00
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
module_param(zfs_arc_meta_prune, int, 0444);
MODULE_PARM_DESC(zfs_arc_meta_prune, "Bytes of meta data to prune");
Add missing ZFS tunables This commit adds module options for all existing zfs tunables. Ideally the average user should never need to modify any of these values. However, in practice sometimes you do need to tweak these values for one reason or another. In those cases it's nice not to have to resort to rebuilding from source. All tunables are visable to modinfo and the list is as follows: $ modinfo module/zfs/zfs.ko filename: module/zfs/zfs.ko license: CDDL author: Sun Microsystems/Oracle, Lawrence Livermore National Laboratory description: ZFS srcversion: 8EAB1D71DACE05B5AA61567 depends: spl,znvpair,zcommon,zunicode,zavl vermagic: 2.6.32-131.0.5.el6.x86_64 SMP mod_unload modversions parm: zvol_major:Major number for zvol device (uint) parm: zvol_threads:Number of threads for zvol device (uint) parm: zio_injection_enabled:Enable fault injection (int) parm: zio_bulk_flags:Additional flags to pass to bulk buffers (int) parm: zio_delay_max:Max zio millisec delay before posting event (int) parm: zio_requeue_io_start_cut_in_line:Prioritize requeued I/O (bool) parm: zil_replay_disable:Disable intent logging replay (int) parm: zfs_nocacheflush:Disable cache flushes (bool) parm: zfs_read_chunk_size:Bytes to read per chunk (long) parm: zfs_vdev_max_pending:Max pending per-vdev I/Os (int) parm: zfs_vdev_min_pending:Min pending per-vdev I/Os (int) parm: zfs_vdev_aggregation_limit:Max vdev I/O aggregation size (int) parm: zfs_vdev_time_shift:Deadline time shift for vdev I/O (int) parm: zfs_vdev_ramp_rate:Exponential I/O issue ramp-up rate (int) parm: zfs_vdev_read_gap_limit:Aggregate read I/O over gap (int) parm: zfs_vdev_write_gap_limit:Aggregate write I/O over gap (int) parm: zfs_vdev_scheduler:I/O scheduler (charp) parm: zfs_vdev_cache_max:Inflate reads small than max (int) parm: zfs_vdev_cache_size:Total size of the per-disk cache (int) parm: zfs_vdev_cache_bshift:Shift size to inflate reads too (int) parm: zfs_scrub_limit:Max scrub/resilver I/O per leaf vdev (int) parm: zfs_recover:Set to attempt to recover from fatal errors (int) parm: spa_config_path:SPA config file (/etc/zfs/zpool.cache) (charp) parm: zfs_zevent_len_max:Max event queue length (int) parm: zfs_zevent_cols:Max event column width (int) parm: zfs_zevent_console:Log events to the console (int) parm: zfs_top_maxinflight:Max I/Os per top-level (int) parm: zfs_resilver_delay:Number of ticks to delay resilver (int) parm: zfs_scrub_delay:Number of ticks to delay scrub (int) parm: zfs_scan_idle:Idle window in clock ticks (int) parm: zfs_scan_min_time_ms:Min millisecs to scrub per txg (int) parm: zfs_free_min_time_ms:Min millisecs to free per txg (int) parm: zfs_resilver_min_time_ms:Min millisecs to resilver per txg (int) parm: zfs_no_scrub_io:Set to disable scrub I/O (bool) parm: zfs_no_scrub_prefetch:Set to disable scrub prefetching (bool) parm: zfs_txg_timeout:Max seconds worth of delta per txg (int) parm: zfs_no_write_throttle:Disable write throttling (int) parm: zfs_write_limit_shift:log2(fraction of memory) per txg (int) parm: zfs_txg_synctime_ms:Target milliseconds between tgx sync (int) parm: zfs_write_limit_min:Min tgx write limit (ulong) parm: zfs_write_limit_max:Max tgx write limit (ulong) parm: zfs_write_limit_inflated:Inflated tgx write limit (ulong) parm: zfs_write_limit_override:Override tgx write limit (ulong) parm: zfs_prefetch_disable:Disable all ZFS prefetching (int) parm: zfetch_max_streams:Max number of streams per zfetch (uint) parm: zfetch_min_sec_reap:Min time before stream reclaim (uint) parm: zfetch_block_cap:Max number of blocks to fetch at a time (uint) parm: zfetch_array_rd_sz:Number of bytes in a array_read (ulong) parm: zfs_pd_blks_max:Max number of blocks to prefetch (int) parm: zfs_dedup_prefetch:Enable prefetching dedup-ed blks (int) parm: zfs_arc_min:Min arc size (ulong) parm: zfs_arc_max:Max arc size (ulong) parm: zfs_arc_meta_limit:Meta limit for arc size (ulong) parm: zfs_arc_reduce_dnlc_percent:Meta reclaim percentage (int) parm: zfs_arc_grow_retry:Seconds before growing arc size (int) parm: zfs_arc_shrink_shift:log2(fraction of arc to reclaim) (int) parm: zfs_arc_p_min_shift:arc_c shift to calc min/max arc_p (int)
2011-05-03 22:09:28 +00:00
module_param(zfs_arc_grow_retry, int, 0444);
MODULE_PARM_DESC(zfs_arc_grow_retry, "Seconds before growing arc size");
module_param(zfs_arc_shrink_shift, int, 0444);
MODULE_PARM_DESC(zfs_arc_shrink_shift, "log2(fraction of arc to reclaim)");
module_param(zfs_arc_p_min_shift, int, 0444);
MODULE_PARM_DESC(zfs_arc_p_min_shift, "arc_c shift to calc min/max arc_p");
Add L2ARC tunables The performance of the L2ARC can be tweaked by a number of tunables, which may be necessary for different workloads: l2arc_write_max max write bytes per interval l2arc_write_boost extra write bytes during device warmup l2arc_noprefetch skip caching prefetched buffers l2arc_headroom number of max device writes to precache l2arc_feed_secs seconds between L2ARC writing l2arc_feed_min_ms min feed interval in milliseconds l2arc_feed_again turbo L2ARC warmup l2arc_norw no reads during writes Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #316
2011-07-08 19:41:57 +00:00
module_param(l2arc_write_max, ulong, 0444);
MODULE_PARM_DESC(l2arc_write_max, "Max write bytes per interval");
module_param(l2arc_write_boost, ulong, 0444);
MODULE_PARM_DESC(l2arc_write_boost, "Extra write bytes during device warmup");
module_param(l2arc_headroom, ulong, 0444);
MODULE_PARM_DESC(l2arc_headroom, "Number of max device writes to precache");
module_param(l2arc_feed_secs, ulong, 0444);
MODULE_PARM_DESC(l2arc_feed_secs, "Seconds between L2ARC writing");
module_param(l2arc_feed_min_ms, ulong, 0444);
MODULE_PARM_DESC(l2arc_feed_min_ms, "Min feed interval in milliseconds");
module_param(l2arc_noprefetch, int, 0444);
MODULE_PARM_DESC(l2arc_noprefetch, "Skip caching prefetched buffers");
module_param(l2arc_feed_again, int, 0444);
MODULE_PARM_DESC(l2arc_feed_again, "Turbo L2ARC warmup");
module_param(l2arc_norw, int, 0444);
MODULE_PARM_DESC(l2arc_norw, "No reads during writes");
Add linux kernel module support Setup linux kernel module support, this includes: - zfs context for kernel/user - kernel module build system integration - kernel module macros - kernel module symbol export - kernel module options Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:49:16 +00:00
#endif
Reference in New Issue Copy Permalink