d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
67dc558175
freebsd-dev/usr.sbin/ppp/proto.c

116 lines
3.1 KiB
C
Raw Normal View History

o Redesign the layering mechanism and make the aliasing code part of the layering. We now ``stack'' layers as soon as we open the device (when we figure out what we're dealing with). A static set of `dispatch' routines are also declared for dealing with incoming packets after they've been `pulled' up through the stacked layers. Physical devices are now assigned handlers based on the device type when they're opened. For the moment there are three device types; ttys, execs and tcps. o Increment version number to 2.2 o Make an entry in [uw]tmp for non-tty -direct invocations (after pap/chap authentication). o Make throughput counters quad_t's o Account for the absolute number of mbuf malloc()s and free()s in ``show mem''. o ``show modem'' becomes ``show physical''.
1999-05-08 11:07:56 +00:00
/*-
* Copyright (c) 1999 Brian Somers <brian@Awfulhak.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
$Id$ -> $FreeBSD$
1999-08-28 01:35:59 +00:00
* $FreeBSD$
o Redesign the layering mechanism and make the aliasing code part of the layering. We now ``stack'' layers as soon as we open the device (when we figure out what we're dealing with). A static set of `dispatch' routines are also declared for dealing with incoming packets after they've been `pulled' up through the stacked layers. Physical devices are now assigned handlers based on the device type when they're opened. For the moment there are three device types; ttys, execs and tcps. o Increment version number to 2.2 o Make an entry in [uw]tmp for non-tty -direct invocations (after pap/chap authentication). o Make throughput counters quad_t's o Account for the absolute number of mbuf malloc()s and free()s in ``show mem''. o ``show modem'' becomes ``show physical''.
1999-05-08 11:07:56 +00:00
*/
#include <sys/types.h>
#include <stdio.h>
#include <termios.h>
#include "layer.h"
#include "acf.h"
#include "defs.h"
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
#include "log.h"
o Redesign the layering mechanism and make the aliasing code part of the layering. We now ``stack'' layers as soon as we open the device (when we figure out what we're dealing with). A static set of `dispatch' routines are also declared for dealing with incoming packets after they've been `pulled' up through the stacked layers. Physical devices are now assigned handlers based on the device type when they're opened. For the moment there are three device types; ttys, execs and tcps. o Increment version number to 2.2 o Make an entry in [uw]tmp for non-tty -direct invocations (after pap/chap authentication). o Make throughput counters quad_t's o Account for the absolute number of mbuf malloc()s and free()s in ``show mem''. o ``show modem'' becomes ``show physical''.
1999-05-08 11:07:56 +00:00
#include "timer.h"
#include "fsm.h"
#include "mbuf.h"
#include "proto.h"
#include "throughput.h"
#include "lqr.h"
#include "hdlc.h"
Support link identification from rfc1570 Two new commands are available; ``ident'' and ``sendident''.
2000-07-19 02:10:35 +00:00
#include "lcp.h"
o Redesign the layering mechanism and make the aliasing code part of the layering. We now ``stack'' layers as soon as we open the device (when we figure out what we're dealing with). A static set of `dispatch' routines are also declared for dealing with incoming packets after they've been `pulled' up through the stacked layers. Physical devices are now assigned handlers based on the device type when they're opened. For the moment there are three device types; ttys, execs and tcps. o Increment version number to 2.2 o Make an entry in [uw]tmp for non-tty -direct invocations (after pap/chap authentication). o Make throughput counters quad_t's o Account for the absolute number of mbuf malloc()s and free()s in ``show mem''. o ``show modem'' becomes ``show physical''.
1999-05-08 11:07:56 +00:00
#include "ccp.h"
#include "link.h"
int
proto_WrapperOctets(struct lcp *lcp, u_short proto)
{
return (lcp->his_protocomp && !(proto & 0xff00)) ? 1 : 2;
}
struct mbuf *
proto_Prepend(struct mbuf *bp, u_short proto, unsigned comp, int extra)
{
u_char cp[2];
cp[0] = proto >> 8;
cp[1] = proto & 0xff;
if (comp && cp[0] == 0)
Cosmetic: Make struct mbuf more like kernel mbufs.
1999-12-20 20:29:47 +00:00
bp = m_prepend(bp, cp + 1, 1, extra);
o Redesign the layering mechanism and make the aliasing code part of the layering. We now ``stack'' layers as soon as we open the device (when we figure out what we're dealing with). A static set of `dispatch' routines are also declared for dealing with incoming packets after they've been `pulled' up through the stacked layers. Physical devices are now assigned handlers based on the device type when they're opened. For the moment there are three device types; ttys, execs and tcps. o Increment version number to 2.2 o Make an entry in [uw]tmp for non-tty -direct invocations (after pap/chap authentication). o Make throughput counters quad_t's o Account for the absolute number of mbuf malloc()s and free()s in ``show mem''. o ``show modem'' becomes ``show physical''.
1999-05-08 11:07:56 +00:00
else
Cosmetic: Make struct mbuf more like kernel mbufs.
1999-12-20 20:29:47 +00:00
bp = m_prepend(bp, cp, 2, extra);
o Redesign the layering mechanism and make the aliasing code part of the layering. We now ``stack'' layers as soon as we open the device (when we figure out what we're dealing with). A static set of `dispatch' routines are also declared for dealing with incoming packets after they've been `pulled' up through the stacked layers. Physical devices are now assigned handlers based on the device type when they're opened. For the moment there are three device types; ttys, execs and tcps. o Increment version number to 2.2 o Make an entry in [uw]tmp for non-tty -direct invocations (after pap/chap authentication). o Make throughput counters quad_t's o Account for the absolute number of mbuf malloc()s and free()s in ``show mem''. o ``show modem'' becomes ``show physical''.
1999-05-08 11:07:56 +00:00
return bp;
}
static struct mbuf *
proto_LayerPush(struct bundle *b, struct link *l, struct mbuf *bp,
int pri, u_short *proto)
{
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
log_Printf(LogDEBUG, "proto_LayerPush: Using 0x%04x\n", *proto);
o Redesign the layering mechanism and make the aliasing code part of the layering. We now ``stack'' layers as soon as we open the device (when we figure out what we're dealing with). A static set of `dispatch' routines are also declared for dealing with incoming packets after they've been `pulled' up through the stacked layers. Physical devices are now assigned handlers based on the device type when they're opened. For the moment there are three device types; ttys, execs and tcps. o Increment version number to 2.2 o Make an entry in [uw]tmp for non-tty -direct invocations (after pap/chap authentication). o Make throughput counters quad_t's o Account for the absolute number of mbuf malloc()s and free()s in ``show mem''. o ``show modem'' becomes ``show physical''.
1999-05-08 11:07:56 +00:00
bp = proto_Prepend(bp, *proto, l->lcp.his_protocomp,
acf_WrapperOctets(&l->lcp, *proto));
Cosmetic: Make struct mbuf more like kernel mbufs.
1999-12-20 20:29:47 +00:00
m_settype(bp, MB_PROTOOUT);
o Redesign the layering mechanism and make the aliasing code part of the layering. We now ``stack'' layers as soon as we open the device (when we figure out what we're dealing with). A static set of `dispatch' routines are also declared for dealing with incoming packets after they've been `pulled' up through the stacked layers. Physical devices are now assigned handlers based on the device type when they're opened. For the moment there are three device types; ttys, execs and tcps. o Increment version number to 2.2 o Make an entry in [uw]tmp for non-tty -direct invocations (after pap/chap authentication). o Make throughput counters quad_t's o Account for the absolute number of mbuf malloc()s and free()s in ``show mem''. o ``show modem'' becomes ``show physical''.
1999-05-08 11:07:56 +00:00
link_ProtocolRecord(l, *proto, PROTO_OUT);
return bp;
}
static struct mbuf *
proto_LayerPull(struct bundle *b, struct link *l, struct mbuf *bp,
u_short *proto)
{
u_char cp[2];
size_t got;
if ((got = mbuf_View(bp, cp, 2)) == 0) {
Cosmetic: Make struct mbuf more like kernel mbufs.
1999-12-20 20:29:47 +00:00
m_freem(bp);
o Redesign the layering mechanism and make the aliasing code part of the layering. We now ``stack'' layers as soon as we open the device (when we figure out what we're dealing with). A static set of `dispatch' routines are also declared for dealing with incoming packets after they've been `pulled' up through the stacked layers. Physical devices are now assigned handlers based on the device type when they're opened. For the moment there are three device types; ttys, execs and tcps. o Increment version number to 2.2 o Make an entry in [uw]tmp for non-tty -direct invocations (after pap/chap authentication). o Make throughput counters quad_t's o Account for the absolute number of mbuf malloc()s and free()s in ``show mem''. o ``show modem'' becomes ``show physical''.
1999-05-08 11:07:56 +00:00
return NULL;
}
*proto = cp[0];
if (!(*proto & 1)) {
if (got == 1) {
Cosmetic: Make struct mbuf more like kernel mbufs.
1999-12-20 20:29:47 +00:00
m_freem(bp);
o Redesign the layering mechanism and make the aliasing code part of the layering. We now ``stack'' layers as soon as we open the device (when we figure out what we're dealing with). A static set of `dispatch' routines are also declared for dealing with incoming packets after they've been `pulled' up through the stacked layers. Physical devices are now assigned handlers based on the device type when they're opened. For the moment there are three device types; ttys, execs and tcps. o Increment version number to 2.2 o Make an entry in [uw]tmp for non-tty -direct invocations (after pap/chap authentication). o Make throughput counters quad_t's o Account for the absolute number of mbuf malloc()s and free()s in ``show mem''. o ``show modem'' becomes ``show physical''.
1999-05-08 11:07:56 +00:00
return NULL;
}
bp = mbuf_Read(bp, cp, 2);
*proto = (*proto << 8) | cp[1];
} else
bp = mbuf_Read(bp, cp, 1);
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
log_Printf(LogDEBUG, "proto_LayerPull: unknown -> 0x%04x\n", *proto);
Cosmetic: Make struct mbuf more like kernel mbufs.
1999-12-20 20:29:47 +00:00
m_settype(bp, MB_PROTOIN);
o Redesign the layering mechanism and make the aliasing code part of the layering. We now ``stack'' layers as soon as we open the device (when we figure out what we're dealing with). A static set of `dispatch' routines are also declared for dealing with incoming packets after they've been `pulled' up through the stacked layers. Physical devices are now assigned handlers based on the device type when they're opened. For the moment there are three device types; ttys, execs and tcps. o Increment version number to 2.2 o Make an entry in [uw]tmp for non-tty -direct invocations (after pap/chap authentication). o Make throughput counters quad_t's o Account for the absolute number of mbuf malloc()s and free()s in ``show mem''. o ``show modem'' becomes ``show physical''.
1999-05-08 11:07:56 +00:00
link_ProtocolRecord(l, *proto, PROTO_IN);
return bp;
}
struct layer protolayer =
{ LAYER_PROTO, "proto", proto_LayerPush, proto_LayerPull };
Reference in New Issue Copy Permalink