d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
68293b42c1
freebsd-dev/sys/pci/pci.c

1520 lines
36 KiB
C
Raw Normal View History

Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/*
* Copyright (c) 1997, Stefan Esser <se@freebsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
Alter the behavior of sys/kern/subr_bus.c:device_print_child() - device_print_child() either lets the BUS_PRINT_CHILD method produce the entire device announcement message or it prints "foo0: not found\n" Alter sys/kern/subr_bus.c:bus_generic_print_child() to take on the previous behavior of device_print_child() (printing the "foo0: <FooDevice 1.1>" bit of the announce message.) Provide bus_print_child_header() and bus_print_child_footer() to actually print the output for bus_generic_print_child(). These functions should be used whenever possible (unless you can just use bus_generic_print_child()) The BUS_PRINT_CHILD method now returns int instead of void. Modify everything else that defines or uses a BUS_PRINT_CHILD method to comply with the above changes. - Devices are 'on' a bus, not 'at' it. - If a custom BUS_PRINT_CHILD method does the same thing as bus_generic_print_child(), use bus_generic_print_child() - Use device_get_nameunit() instead of both device_get_name() and device_get_unit() - All BUS_PRINT_CHILD methods return the number of characters output. Reviewed by: dfr, peter
1999-07-29 01:03:04 +00:00
* $Id: pci.c,v 1.113 1999/07/28 07:57:47 dfr Exp $
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
*
*/
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + Stefan Esser <se> Directory for PCI autoconfigure and device driver code.
1994-09-01 01:45:19 +00:00
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
#include "opt_bus.h"
Make all file-system (MFS, FFS, NFS, LFS, DEVFS) related option new-style. This introduce an xxxFS_BOOT for each of the rootable filesystems. (Presently not required, but encouraged to allow a smooth move of option *FS to opt_dontuse.h later.) LFS is temporarily disabled, and will be re-enabled tomorrow.
1998-01-24 02:54:56 +00:00
#include "opt_devfs.h"
This commit fixes various 64bit portability problems required for FreeBSD/alpha. The most significant item is to change the command argument to ioctl functions from int to u_long. This change brings us inline with various other BSD versions. Driver writers may like to use (__FreeBSD_version == 300003) to detect this change. The prototype FreeBSD/alpha machdep will follow in a couple of days time.
1998-06-07 17:13:14 +00:00
#include "opt_simos.h"
Make all file-system (MFS, FFS, NFS, LFS, DEVFS) related option new-style. This introduce an xxxFS_BOOT for each of the rootable filesystems. (Presently not required, but encouraged to allow a smooth move of option *FS to opt_dontuse.h later.) LFS is temporarily disabled, and will be re-enabled tomorrow.
1998-01-24 02:54:56 +00:00
Added a bit of missing functionality to make this work correctly on a wider variety of systems. Include the deivers from pci_intel.c in pci_config.c (I hope this is what was intended; my system works ok). Use pmap_mapdev(). Automatically map any large linear frame buffers or whatnot in VGA-style devices which ordinarily would not have their own drivers, and don't call not_supported() for them. (This shuts up complaints about my Matrox card.) Include the beginnings of what could eventually become dynamically-loadable PCI devices. Allow for the possibility of PCI devices simply providing a PCI veneer over an existing ISA device, and shut up about them, too. Make autoconfiguration text conform more to the style of other supported buses.
1994-09-14 01:34:51 +00:00
#include <sys/param.h>
#include <sys/systm.h>
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> Bug fixed, that caused system hang on first interrupt on some motherboards. New version of PCI bus configuration code, now supports dynamic interrupt configuration (using BIOS supplied values). NCR SCSI and DEC Ethernet driver patched to use this feature. *** Remove PCI IRQ specifications from your kernel config file ! ***
1994-10-12 02:33:23 +00:00
#include <sys/malloc.h>
Replace the pcidevice_set linker set based configuration mechanism for old style pci drivers with a simple one-line change to use a module that registers itself under new-bus and should in theory enable just about all of the pci drivers to be loadable (kldload and loader(8)) but without having the impact of converting the APIs yet. This also fixes the problem of having undefined variables when only new-style pci drivers are present.
1999-04-24 19:59:20 +00:00
#include <sys/module.h>
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
#include <sys/fcntl.h>
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
#include <sys/conf.h>
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
#include <sys/kernel.h>
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
#include <sys/queue.h>
#include <sys/types.h>
#include <sys/buf.h>
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
#ifdef DEVFS
#include <sys/devfsext.h>
#endif /* DEVFS */
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + Stefan Esser <se> Directory for PCI autoconfigure and device driver code.
1994-09-01 01:45:19 +00:00
#include <vm/vm.h>
Untangled the vm.h include file spaghetti.
1995-12-07 12:48:31 +00:00
#include <vm/pmap.h>
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
#include <vm/vm_extern.h>
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + Stefan Esser <se> Directory for PCI autoconfigure and device driver code.
1994-09-01 01:45:19 +00:00
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
#include <sys/bus.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <machine/resource.h>
#include <machine/md_var.h> to bring the prototype for alpha_platform_assign_pciintr() into scope (!).
1999-07-01 22:58:03 +00:00
#include <machine/md_var.h> /* For the Alpha */
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
#include <pci/pcireg.h>
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
#include <pci/pcivar.h>
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
#include <pci/pci_ioctl.h>
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
Modified to use renamed get_pci_apic_irq() -> pci_apic_pin() function.
1997-06-25 20:56:29 +00:00
#ifdef APIC_IO
#include <machine/smp.h>
#endif /* APIC_IO */
Staticize.
1999-04-11 02:50:42 +00:00
static STAILQ_HEAD(devlist, pci_devinfo) pci_devq;
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
u_int32_t pci_numdevs = 0;
Staticize.
1999-04-11 02:50:42 +00:00
static u_int32_t pci_generation = 0;
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
Implement the BUS_PROBE_NOMATCH method for the PCI bus. This function is called for each device for which no driver was found. Output is similar to the eisa_probe_nomatch() function but with the added benefit of displaying the assigned IRQ (since PCI gives us this information up front.) Output is like so: pci0: unknown card CPQ0508 (vendor=0x0e11, dev=0x0508) at 11.0 irq 9 pci0: unknown card DFZ0508 (vendor=0x10da, dev=0x0508) at 11.0 irq 9 pci0: unknown card DBL0508 (vendor=0x104c, dev=0x0508) at 11.0 irq 9 pci0: unknown card DDM0011 (vendor=0x108d, dev=0x0011) at 11.0 irq 9 I'm not happy with the 3 lines of macro cruft that got added but I consider it a temporary annoyance as those bits will be moved to some place where PCI, EISA and ISAPNP code will be able to use them. (Not surprisingly, this message is longer than the code in question.) Reviewed by: peter, dfr
1999-07-27 04:28:14 +00:00
#define PCI_MFCTR_CHAR0(ID) (char)(((ID>>10) & 0x1F) | '@') /* Bits 10-14 */
#define PCI_MFCTR_CHAR1(ID) (char)(((ID>>5 ) & 0x1F) | '@') /* Bits 5-9 */
#define PCI_MFCTR_CHAR2(ID) (char)(( ID & 0x1F) | '@') /* Bits 0-4 */
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* return base address of memory or port map */
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> Bug fixed, that caused system hang on first interrupt on some motherboards. New version of PCI bus configuration code, now supports dynamic interrupt configuration (using BIOS supplied values). NCR SCSI and DEC Ethernet driver patched to use this feature. *** Remove PCI IRQ specifications from your kernel config file ! ***
1994-10-12 02:33:23 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
static int
pci_mapbase(unsigned mapreg)
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
{
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
int mask = 0x03;
if ((mapreg & 0x01) == 0)
mask = 0x0f;
return (mapreg & ~mask);
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* return map type of memory or port map */
Update PCI bus code from my current sources: - always use pci_conf_read() and pci_conf_write(). (This is required to simulate non-existant devices in my system for PCI bridge code tests.) - reorder some functions (put the main functions at the end). - correct off by one bug in the code dealing with unitialized PCI to PCI bridge chips. (Bug found by ASAMI Satoshi.) - print function number for multi-function devices.
1996-04-14 20:14:36 +00:00
static int
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
pci_maptype(unsigned mapreg)
{
static u_int8_t maptype[0x10] = {
PCI_MAPMEM, PCI_MAPPORT,
PCI_MAPMEM, 0,
PCI_MAPMEM, PCI_MAPPORT,
0, 0,
PCI_MAPMEM|PCI_MAPMEMP, PCI_MAPPORT,
PCI_MAPMEM|PCI_MAPMEMP, 0,
PCI_MAPMEM|PCI_MAPMEMP, PCI_MAPPORT,
0, 0,
Add PCI LKM support.
1997-01-21 23:23:40 +00:00
};
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
return maptype[mapreg & 0x0f];
Add PCI LKM support.
1997-01-21 23:23:40 +00:00
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* return log2 of map size decoded for memory or port map */
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
Add heuristic to detect multi-function devices that don't announce this feature in the header type register, though it is required by the PCI spec. This should correctly probe both functions of the Intel 82371FB chip, without the need for a special case based on the device ID.
1996-01-30 01:14:29 +00:00
static int
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
pci_mapsize(unsigned testval)
Add heuristic to detect multi-function devices that don't announce this feature in the header type register, though it is required by the PCI spec. This should correctly probe both functions of the Intel 82371FB chip, without the need for a special case based on the device ID.
1996-01-30 01:14:29 +00:00
{
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
int ln2size;
Add heuristic to detect multi-function devices that don't announce this feature in the header type register, though it is required by the PCI spec. This should correctly probe both functions of the Intel 82371FB chip, without the need for a special case based on the device ID.
1996-01-30 01:14:29 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
testval = pci_mapbase(testval);
Two minor changes to the code that builds the pci map array: 1) Stop at the first map register that contains a zero value. 2) When testing for the map size work up from low values, since this works around a bug in some BusLogic SCSI card, which has the 16 upper port base address bits hardwired to zero. The config register dump printed in the bootverbose case has been slightly rearranged.
1997-05-28 10:01:03 +00:00
ln2size = 0;
if (testval != 0) {
while ((testval & 1) == 0)
{
ln2size++;
testval >>= 1;
}
Make mapping messages depend on bootverbose flag. Add PCI subclass to unknown device message.
1995-09-07 15:20:53 +00:00
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
return (ln2size);
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* return log2 of address range supported by map register */
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
static int
pci_maprange(unsigned mapreg)
{
int ln2range = 0;
switch (mapreg & 0x07) {
case 0x00:
case 0x01:
case 0x05:
ln2range = 32;
break;
case 0x02:
ln2range = 20;
break;
case 0x04:
ln2range = 64;
break;
Update PCI bus code from my current sources: - always use pci_conf_read() and pci_conf_write(). (This is required to simulate non-existant devices in my system for PCI bridge code tests.) - reorder some functions (put the main functions at the end). - correct off by one bug in the code dealing with unitialized PCI to PCI bridge chips. (Bug found by ASAMI Satoshi.) - print function number for multi-function devices.
1996-04-14 20:14:36 +00:00
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
return (ln2range);
Reapplied all of Stefan's changes. What a mess - the files were modified and moved at the same time. This made it *very* difficult to fix the revision log lossage that happend when the files were moved. SIGH.
1995-02-02 13:12:18 +00:00
}
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* extract map parameters into newly allocated array of pcimap structures */
static pcimap *
pci_readmaps(pcicfgregs *cfg, int maxmaps)
Add PCI LKM support.
1997-01-21 23:23:40 +00:00
{
In the cyrix Cx5530, there are null (empty) Base address registers before the base register that controls Ultra-DMA, so we need to examine all possible base registers instead of just giving up at the first empty one. Also, looking at the source code to the BIOS, I see that they are also checking for 0xffffffff as an invalid value so do the same. Stefan may like to clean this up, but at least now I can find my PCI IDE registers.
1998-11-03 08:47:29 +00:00
int i, j = 0;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
pcimap *map;
int map64 = 0;
In the cyrix Cx5530, there are null (empty) Base address registers before the base register that controls Ultra-DMA, so we need to examine all possible base registers instead of just giving up at the first empty one. Also, looking at the source code to the BIOS, I see that they are also checking for 0xffffffff as an invalid value so do the same. Stefan may like to clean this up, but at least now I can find my PCI IDE registers.
1998-11-03 08:47:29 +00:00
int reg = PCIR_MAPS;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
Two minor changes to the code that builds the pci map array: 1) Stop at the first map register that contains a zero value. 2) When testing for the map size work up from low values, since this works around a bug in some BusLogic SCSI card, which has the 16 upper port base address bits hardwired to zero. The config register dump printed in the bootverbose case has been slightly rearranged.
1997-05-28 10:01:03 +00:00
for (i = 0; i < maxmaps; i++) {
int reg = PCIR_MAPS + i*4;
u_int32_t base;
u_int32_t ln2range;
base = pci_cfgread(cfg, reg, 4);
ln2range = pci_maprange(base);
In the cyrix Cx5530, there are null (empty) Base address registers before the base register that controls Ultra-DMA, so we need to examine all possible base registers instead of just giving up at the first empty one. Also, looking at the source code to the BIOS, I see that they are also checking for 0xffffffff as an invalid value so do the same. Stefan may like to clean this up, but at least now I can find my PCI IDE registers.
1998-11-03 08:47:29 +00:00
if (base == 0 || ln2range == 0 || base == 0xffffffff)
continue; /* skip invalid entry */
else {
j++;
if (ln2range > 32) {
i++;
j++;
}
}
Two minor changes to the code that builds the pci map array: 1) Stop at the first map register that contains a zero value. 2) When testing for the map size work up from low values, since this works around a bug in some BusLogic SCSI card, which has the 16 upper port base address bits hardwired to zero. The config register dump printed in the bootverbose case has been slightly rearranged.
1997-05-28 10:01:03 +00:00
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
In the cyrix Cx5530, there are null (empty) Base address registers before the base register that controls Ultra-DMA, so we need to examine all possible base registers instead of just giving up at the first empty one. Also, looking at the source code to the BIOS, I see that they are also checking for 0xffffffff as an invalid value so do the same. Stefan may like to clean this up, but at least now I can find my PCI IDE registers.
1998-11-03 08:47:29 +00:00
map = malloc(j * sizeof (pcimap), M_DEVBUF, M_WAITOK);
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
if (map != NULL) {
In the cyrix Cx5530, there are null (empty) Base address registers before the base register that controls Ultra-DMA, so we need to examine all possible base registers instead of just giving up at the first empty one. Also, looking at the source code to the BIOS, I see that they are also checking for 0xffffffff as an invalid value so do the same. Stefan may like to clean this up, but at least now I can find my PCI IDE registers.
1998-11-03 08:47:29 +00:00
bzero(map, sizeof(pcimap) * j);
cfg->nummaps = j;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
In the cyrix Cx5530, there are null (empty) Base address registers before the base register that controls Ultra-DMA, so we need to examine all possible base registers instead of just giving up at the first empty one. Also, looking at the source code to the BIOS, I see that they are also checking for 0xffffffff as an invalid value so do the same. Stefan may like to clean this up, but at least now I can find my PCI IDE registers.
1998-11-03 08:47:29 +00:00
for (i = 0, j = 0; i < maxmaps; i++, reg += 4) {
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
u_int32_t base;
u_int32_t testval;
base = pci_cfgread(cfg, reg, 4);
if (map64 == 0) {
In the cyrix Cx5530, there are null (empty) Base address registers before the base register that controls Ultra-DMA, so we need to examine all possible base registers instead of just giving up at the first empty one. Also, looking at the source code to the BIOS, I see that they are also checking for 0xffffffff as an invalid value so do the same. Stefan may like to clean this up, but at least now I can find my PCI IDE registers.
1998-11-03 08:47:29 +00:00
if (base == 0 || base == 0xffffffff)
continue; /* skip invalid entry */
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
pci_cfgwrite(cfg, reg, 0xffffffff, 4);
testval = pci_cfgread(cfg, reg, 4);
pci_cfgwrite(cfg, reg, base, 4);
Fix problem with zero valued map registers followed by valid map entries. The previous code just ignored the invalid map register, but this gave surprising results because of the way pci_map_port() associated the map register offset supplied with a map entry in the map array.
1999-01-19 23:29:20 +00:00
map[j].reg = reg;
In the cyrix Cx5530, there are null (empty) Base address registers before the base register that controls Ultra-DMA, so we need to examine all possible base registers instead of just giving up at the first empty one. Also, looking at the source code to the BIOS, I see that they are also checking for 0xffffffff as an invalid value so do the same. Stefan may like to clean this up, but at least now I can find my PCI IDE registers.
1998-11-03 08:47:29 +00:00
map[j].base = pci_mapbase(base);
map[j].type = pci_maptype(base);
map[j].ln2size = pci_mapsize(testval);
map[j].ln2range = pci_maprange(testval);
map64 = map[j].ln2range == 64;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
} else {
/* only fill in base, other fields are 0 */
In the cyrix Cx5530, there are null (empty) Base address registers before the base register that controls Ultra-DMA, so we need to examine all possible base registers instead of just giving up at the first empty one. Also, looking at the source code to the BIOS, I see that they are also checking for 0xffffffff as an invalid value so do the same. Stefan may like to clean this up, but at least now I can find my PCI IDE registers.
1998-11-03 08:47:29 +00:00
map[j].base = base;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
map64 = 0;
}
Add support for multiple PCI "hoses" used on various alpha platforms. The specific intent of this commit is to pave the way for importing Compaq XP1000 support. These changes should not affect the i386 port. Reviewed by: Doug Rabson <dfr@nlsystems.com> (actually, he walked me through most of it & deserves more than reviewd-by credit )
1999-05-20 15:33:33 +00:00
#ifdef __alpha__
/*
* XXX: encode hose number in the base addr,
* This will go away once the bus_space functions
* can deal with multiple hoses
*/
if(cfg->hose){
if(map[j].base & 0x80000000){
printf("base addr = 0x%x\n", map[j].base);
printf("hacked addr = 0x%x\n",
map[j].base | (cfg->hose << 31));
panic("hose encoding hack would clobber base addr");
}
if(cfg->hose > 1 )
panic("only one hose supported!");
map[j].base |= (cfg->hose << 31);
}
#endif
In the cyrix Cx5530, there are null (empty) Base address registers before the base register that controls Ultra-DMA, so we need to examine all possible base registers instead of just giving up at the first empty one. Also, looking at the source code to the BIOS, I see that they are also checking for 0xffffffff as an invalid value so do the same. Stefan may like to clean this up, but at least now I can find my PCI IDE registers.
1998-11-03 08:47:29 +00:00
j++;
Add PCI LKM support.
1997-01-21 23:23:40 +00:00
}
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
return (map);
Add PCI LKM support.
1997-01-21 23:23:40 +00:00
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* adjust some values from PCI 1.0 devices to match 2.0 standards ... */
Add PCI LKM support.
1997-01-21 23:23:40 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
static void
pci_fixancient(pcicfgregs *cfg)
Add PCI LKM support.
1997-01-21 23:23:40 +00:00
{
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
if (cfg->hdrtype != 0)
return;
Add PCI LKM support.
1997-01-21 23:23:40 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* PCI to PCI bridges use header type 1 */
Use "baseclass" instead of "class" for storing the contents of PCI register 0xB so that C++ programs can use the PCI conf interface.
1998-08-13 19:12:20 +00:00
if (cfg->baseclass == PCIC_BRIDGE && cfg->subclass == PCIS_BRIDGE_PCI)
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
cfg->hdrtype = 1;
Add PCI LKM support.
1997-01-21 23:23:40 +00:00
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* read config data specific to header type 1 device (PCI to PCI bridge) */
static void *
pci_readppb(pcicfgregs *cfg)
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + Stefan Esser <se> Directory for PCI autoconfigure and device driver code.
1994-09-01 01:45:19 +00:00
{
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
pcih1cfgregs *p;
Reapplied all of Stefan's changes. What a mess - the files were modified and moved at the same time. This made it *very* difficult to fix the revision log lossage that happend when the files were moved. SIGH.
1995-02-02 13:12:18 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
p = malloc(sizeof (pcih1cfgregs), M_DEVBUF, M_WAITOK);
if (p == NULL)
return (NULL);
Reapplied all of Stefan's changes. What a mess - the files were modified and moved at the same time. This made it *very* difficult to fix the revision log lossage that happend when the files were moved. SIGH.
1995-02-02 13:12:18 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
bzero(p, sizeof *p);
Reapplied all of Stefan's changes. What a mess - the files were modified and moved at the same time. This made it *very* difficult to fix the revision log lossage that happend when the files were moved. SIGH.
1995-02-02 13:12:18 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
p->secstat = pci_cfgread(cfg, PCIR_SECSTAT_1, 2);
p->bridgectl = pci_cfgread(cfg, PCIR_BRIDGECTL_1, 2);
Reapplied all of Stefan's changes. What a mess - the files were modified and moved at the same time. This made it *very* difficult to fix the revision log lossage that happend when the files were moved. SIGH.
1995-02-02 13:12:18 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
p->seclat = pci_cfgread(cfg, PCIR_SECLAT_1, 1);
Reapplied all of Stefan's changes. What a mess - the files were modified and moved at the same time. This made it *very* difficult to fix the revision log lossage that happend when the files were moved. SIGH.
1995-02-02 13:12:18 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
p->iobase = PCI_PPBIOBASE (pci_cfgread(cfg, PCIR_IOBASEH_1, 2),
pci_cfgread(cfg, PCIR_IOBASEL_1, 1));
p->iolimit = PCI_PPBIOLIMIT (pci_cfgread(cfg, PCIR_IOLIMITH_1, 2),
pci_cfgread(cfg, PCIR_IOLIMITL_1, 1));
Reapplied all of Stefan's changes. What a mess - the files were modified and moved at the same time. This made it *very* difficult to fix the revision log lossage that happend when the files were moved. SIGH.
1995-02-02 13:12:18 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
p->membase = PCI_PPBMEMBASE (0,
pci_cfgread(cfg, PCIR_MEMBASE_1, 2));
p->memlimit = PCI_PPBMEMLIMIT (0,
pci_cfgread(cfg, PCIR_MEMLIMIT_1, 2));
Reapplied all of Stefan's changes. What a mess - the files were modified and moved at the same time. This made it *very* difficult to fix the revision log lossage that happend when the files were moved. SIGH.
1995-02-02 13:12:18 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
p->pmembase = PCI_PPBMEMBASE (
(pci_addr_t)pci_cfgread(cfg, PCIR_PMBASEH_1, 4),
pci_cfgread(cfg, PCIR_PMBASEL_1, 2));
Reapplied all of Stefan's changes. What a mess - the files were modified and moved at the same time. This made it *very* difficult to fix the revision log lossage that happend when the files were moved. SIGH.
1995-02-02 13:12:18 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
p->pmemlimit = PCI_PPBMEMLIMIT (
(pci_addr_t)pci_cfgread(cfg, PCIR_PMLIMITH_1, 4),
pci_cfgread(cfg, PCIR_PMLIMITL_1, 2));
return (p);
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + Stefan Esser <se> Directory for PCI autoconfigure and device driver code.
1994-09-01 01:45:19 +00:00
}
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* read config data specific to header type 2 device (PCI to CardBus bridge) */
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + Stefan Esser <se> Directory for PCI autoconfigure and device driver code.
1994-09-01 01:45:19 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
static void *
pci_readpcb(pcicfgregs *cfg)
{
pcih2cfgregs *p;
New PCI attach code: PCI BIOS mappings are retained, except if option PCI_REMAP is specified in the kernel config file. There is now a list of attach addresses, and the first address that seems to make some device registers appear is chosen. Reviewed by: se Submitted by: wolf
1995-02-22 14:17:15 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
p = malloc(sizeof (pcih2cfgregs), M_DEVBUF, M_WAITOK);
if (p == NULL)
return (NULL);
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + <se> Improved bus probing, symbolic names for registers.. Chip set parameters get dumped for intel PCI chip sets (82424+82434 only, for now).
1994-09-16 00:33:29 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
bzero(p, sizeof *p);
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
p->secstat = pci_cfgread(cfg, PCIR_SECSTAT_2, 2);
p->bridgectl = pci_cfgread(cfg, PCIR_BRIDGECTL_2, 2);
p->seclat = pci_cfgread(cfg, PCIR_SECLAT_2, 1);
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
p->membase0 = pci_cfgread(cfg, PCIR_MEMBASE0_2, 4);
p->memlimit0 = pci_cfgread(cfg, PCIR_MEMLIMIT0_2, 4);
p->membase1 = pci_cfgread(cfg, PCIR_MEMBASE1_2, 4);
p->memlimit1 = pci_cfgread(cfg, PCIR_MEMLIMIT1_2, 4);
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + Stefan Esser <se> Directory for PCI autoconfigure and device driver code.
1994-09-01 01:45:19 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
p->iobase0 = pci_cfgread(cfg, PCIR_IOBASE0_2, 4);
p->iolimit0 = pci_cfgread(cfg, PCIR_IOLIMIT0_2, 4);
p->iobase1 = pci_cfgread(cfg, PCIR_IOBASE1_2, 4);
p->iolimit1 = pci_cfgread(cfg, PCIR_IOLIMIT1_2, 4);
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + <se> Improved bus probing, symbolic names for registers.. Chip set parameters get dumped for intel PCI chip sets (82424+82434 only, for now).
1994-09-16 00:33:29 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
p->pccardif = pci_cfgread(cfg, PCIR_PCCARDIF_2, 4);
return p;
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + Stefan Esser <se> Directory for PCI autoconfigure and device driver code.
1994-09-01 01:45:19 +00:00
}
First try to add support for PCI-PCI bridge chips (written for the DEC 21050 chip in particular, don't have specs of other such chips). This should add support for Multiple-Ethernet PCI cards (e.g. Znyx 314). Reviewed by: se Submitted by: <wolf@kintaro.cologne.de> Wolfgang Stanglmeier
1995-02-27 17:17:14 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* extract header type specific config data */
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
static void
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
pci_hdrtypedata(pcicfgregs *cfg)
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
{
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
switch (cfg->hdrtype) {
case 0:
cfg->subvendor = pci_cfgread(cfg, PCIR_SUBVEND_0, 2);
cfg->subdevice = pci_cfgread(cfg, PCIR_SUBDEV_0, 2);
cfg->map = pci_readmaps(cfg, PCI_MAXMAPS_0);
break;
case 1:
cfg->subvendor = pci_cfgread(cfg, PCIR_SUBVEND_1, 2);
cfg->subdevice = pci_cfgread(cfg, PCIR_SUBDEV_1, 2);
cfg->secondarybus = pci_cfgread(cfg, PCIR_SECBUS_1, 1);
cfg->subordinatebus = pci_cfgread(cfg, PCIR_SUBBUS_1, 1);
cfg->map = pci_readmaps(cfg, PCI_MAXMAPS_1);
cfg->hdrspec = pci_readppb(cfg);
break;
case 2:
cfg->subvendor = pci_cfgread(cfg, PCIR_SUBVEND_2, 2);
cfg->subdevice = pci_cfgread(cfg, PCIR_SUBDEV_2, 2);
cfg->secondarybus = pci_cfgread(cfg, PCIR_SECBUS_2, 1);
cfg->subordinatebus = pci_cfgread(cfg, PCIR_SUBBUS_2, 1);
cfg->map = pci_readmaps(cfg, PCI_MAXMAPS_2);
cfg->hdrspec = pci_readpcb(cfg);
break;
Make mapping messages depend on bootverbose flag. Add PCI subclass to unknown device message.
1995-09-07 15:20:53 +00:00
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
}
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* read configuration header into pcicfgrect structure */
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
static struct pci_devinfo *
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
pci_readcfg(pcicfgregs *probe)
{
pcicfgregs *cfg = NULL;
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
struct pci_devinfo *devlist_entry;
struct devlist *devlist_head;
devlist_head = &pci_devq;
devlist_entry = NULL;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
if (pci_cfgread(probe, PCIR_DEVVENDOR, 4) != -1) {
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
devlist_entry = malloc(sizeof(struct pci_devinfo),
M_DEVBUF, M_WAITOK);
if (devlist_entry == NULL)
return (NULL);
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
bzero(devlist_entry, sizeof *devlist_entry);
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
cfg = &devlist_entry->cfg;
Add support for multiple PCI "hoses" used on various alpha platforms. The specific intent of this commit is to pave the way for importing Compaq XP1000 support. These changes should not affect the i386 port. Reviewed by: Doug Rabson <dfr@nlsystems.com> (actually, he walked me through most of it & deserves more than reviewd-by credit )
1999-05-20 15:33:33 +00:00
cfg->hose = probe->hose;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
cfg->bus = probe->bus;
cfg->slot = probe->slot;
cfg->func = probe->func;
cfg->vendor = pci_cfgread(cfg, PCIR_VENDOR, 2);
cfg->device = pci_cfgread(cfg, PCIR_DEVICE, 2);
cfg->cmdreg = pci_cfgread(cfg, PCIR_COMMAND, 2);
cfg->statreg = pci_cfgread(cfg, PCIR_STATUS, 2);
Use "baseclass" instead of "class" for storing the contents of PCI register 0xB so that C++ programs can use the PCI conf interface.
1998-08-13 19:12:20 +00:00
cfg->baseclass = pci_cfgread(cfg, PCIR_CLASS, 1);
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
cfg->subclass = pci_cfgread(cfg, PCIR_SUBCLASS, 1);
cfg->progif = pci_cfgread(cfg, PCIR_PROGIF, 1);
cfg->revid = pci_cfgread(cfg, PCIR_REVID, 1);
cfg->hdrtype = pci_cfgread(cfg, PCIR_HEADERTYPE, 1);
cfg->cachelnsz = pci_cfgread(cfg, PCIR_CACHELNSZ, 1);
cfg->lattimer = pci_cfgread(cfg, PCIR_LATTIMER, 1);
cfg->intpin = pci_cfgread(cfg, PCIR_INTPIN, 1);
cfg->intline = pci_cfgread(cfg, PCIR_INTLINE, 1);
Add a call to a platform-specific irq remapping function for alpha platforms which don't record the correct irqs in PCI config space. Submitted by: Andrew Gallatin <gallatin@cs.duke.edu>
1998-07-22 08:40:46 +00:00
#ifdef __alpha__
alpha_platform_assign_pciintr(cfg);
#endif
Add support for APIC_IO to pci IRQ configuration. The support for APIC_IO was lost in the new set of pci modules. This patch restores the ability to build SMP/APIC_IO kernels.
1997-05-27 04:09:01 +00:00
#ifdef APIC_IO
Minor cleanup of APIC_IO code. Submitted by: Stefan Esser <se@freebsd.org>
1997-05-27 19:24:36 +00:00
if (cfg->intpin != 0) {
int airq;
Add support for APIC_IO to pci IRQ configuration. The support for APIC_IO was lost in the new set of pci modules. This patch restores the ability to build SMP/APIC_IO kernels.
1997-05-27 04:09:01 +00:00
Maintain a mapping from irq number to (ioapic number, int pin) tuple, and use this when masking/unmasking interrupts. Maintain a mapping from (iopaic number, int pin) tuple to irq number, and use this when configuring devices and programming the ioapics. Previous code assumed that irq number was equal to int pin number, and that the ioapic number was 0. Don't let an AP enter _cpu_switch before all local apics are initialized.
1998-09-06 22:41:42 +00:00
airq = pci_apic_irq(cfg->bus, cfg->slot, cfg->intpin);
Add two workarounds for broken MP tables: - Attempt to handle PCI devices where the interrupt is an ISA/EISA interrupt according to the mp table. - Attempt to handle multiple IO APIC pins connected to the same PCI or ISA/EISA interrupt source. Print a warning if this happens, since performance is suboptimal. This workaround is only used for PCI devices. With these two workarounds, the -SMP kernel is capable of running on my Asus P/I-P65UP5 motherboard when version 1.4 of the MP table is disabled.
1998-04-01 21:07:37 +00:00
if (airq >= 0) {
/* PCI specific entry found in MP table */
if (airq != cfg->intline) {
undirect_pci_irq(cfg->intline);
cfg->intline = airq;
}
} else {
/*
* PCI interrupts might be redirected to the
* ISA bus according to some MP tables. Use the
* same methods as used by the ISA devices
* devices to find the proper IOAPIC int pin.
*/
Maintain a mapping from irq number to (ioapic number, int pin) tuple, and use this when masking/unmasking interrupts. Maintain a mapping from (iopaic number, int pin) tuple to irq number, and use this when configuring devices and programming the ioapics. Previous code assumed that irq number was equal to int pin number, and that the ioapic number was 0. Don't let an AP enter _cpu_switch before all local apics are initialized.
1998-09-06 22:41:42 +00:00
airq = isa_apic_irq(cfg->intline);
Add two workarounds for broken MP tables: - Attempt to handle PCI devices where the interrupt is an ISA/EISA interrupt according to the mp table. - Attempt to handle multiple IO APIC pins connected to the same PCI or ISA/EISA interrupt source. Print a warning if this happens, since performance is suboptimal. This workaround is only used for PCI devices. With these two workarounds, the -SMP kernel is capable of running on my Asus P/I-P65UP5 motherboard when version 1.4 of the MP table is disabled.
1998-04-01 21:07:37 +00:00
if ((airq >= 0) && (airq != cfg->intline)) {
/* XXX: undirect_pci_irq() ? */
undirect_isa_irq(cfg->intline);
cfg->intline = airq;
}
Add support for APIC_IO to pci IRQ configuration. The support for APIC_IO was lost in the new set of pci modules. This patch restores the ability to build SMP/APIC_IO kernels.
1997-05-27 04:09:01 +00:00
}
}
Modified to use renamed get_pci_apic_irq() -> pci_apic_pin() function.
1997-06-25 20:56:29 +00:00
#endif /* APIC_IO */
Add support for APIC_IO to pci IRQ configuration. The support for APIC_IO was lost in the new set of pci modules. This patch restores the ability to build SMP/APIC_IO kernels.
1997-05-27 04:09:01 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
cfg->mingnt = pci_cfgread(cfg, PCIR_MINGNT, 1);
cfg->maxlat = pci_cfgread(cfg, PCIR_MAXLAT, 1);
cfg->mfdev = (cfg->hdrtype & PCIM_MFDEV) != 0;
cfg->hdrtype &= ~PCIM_MFDEV;
pci_fixancient(cfg);
pci_hdrtypedata(cfg);
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
STAILQ_INSERT_TAIL(devlist_head, devlist_entry, pci_links);
devlist_entry->conf.pc_sel.pc_bus = cfg->bus;
devlist_entry->conf.pc_sel.pc_dev = cfg->slot;
devlist_entry->conf.pc_sel.pc_func = cfg->func;
devlist_entry->conf.pc_hdr = cfg->hdrtype;
devlist_entry->conf.pc_subvendor = cfg->subvendor;
devlist_entry->conf.pc_subdevice = cfg->subdevice;
devlist_entry->conf.pc_vendor = cfg->vendor;
devlist_entry->conf.pc_device = cfg->device;
devlist_entry->conf.pc_class = cfg->baseclass;
devlist_entry->conf.pc_subclass = cfg->subclass;
devlist_entry->conf.pc_progif = cfg->progif;
devlist_entry->conf.pc_revid = cfg->revid;
pci_numdevs++;
pci_generation++;
Make mapping messages depend on bootverbose flag. Add PCI subclass to unknown device message.
1995-09-07 15:20:53 +00:00
}
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
return (devlist_entry);
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
}
Remove a bunch of variables which were unused both in GENERIC and LINT. Found by: -Wunused
1997-11-07 08:53:44 +00:00
#if 0
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* free pcicfgregs structure and all depending data structures */
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
static int
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
pci_freecfg(struct pci_devinfo *dinfo)
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
{
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
struct devlist *devlist_head;
devlist_head = &pci_devq;
if (dinfo->cfg.hdrspec != NULL)
free(dinfo->cfg.hdrspec, M_DEVBUF);
if (dinfo->cfg.map != NULL)
free(dinfo->cfg.map, M_DEVBUF);
/* XXX this hasn't been tested */
STAILQ_REMOVE(devlist_head, dinfo, pci_devinfo, pci_links);
free(dinfo, M_DEVBUF);
/* increment the generation count */
pci_generation++;
/* we're losing one device */
pci_numdevs--;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
return (0);
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
}
Remove a bunch of variables which were unused both in GENERIC and LINT. Found by: -Wunused
1997-11-07 08:53:44 +00:00
#endif
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
Add support for multiple PCI "hoses" used on various alpha platforms. The specific intent of this commit is to pave the way for importing Compaq XP1000 support. These changes should not affect the i386 port. Reviewed by: Doug Rabson <dfr@nlsystems.com> (actually, he walked me through most of it & deserves more than reviewd-by credit )
1999-05-20 15:33:33 +00:00
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
/*
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
* This is the user interface to PCI configuration space.
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
*/
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
static int
pci_open(dev_t dev, int oflags, int devtype, struct proc *p)
{
if ((oflags & FWRITE) && securelevel > 0) {
return EPERM;
}
return 0;
}
static int
pci_close(dev_t dev, int flag, int devtype, struct proc *p)
{
return 0;
}
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
/*
* Match a single pci_conf structure against an array of pci_match_conf
* structures. The first argument, 'matches', is an array of num_matches
* pci_match_conf structures. match_buf is a pointer to the pci_conf
* structure that will be compared to every entry in the matches array.
* This function returns 1 on failure, 0 on success.
*/
static int
pci_conf_match(struct pci_match_conf *matches, int num_matches,
struct pci_conf *match_buf)
{
int i;
if ((matches == NULL) || (match_buf == NULL) || (num_matches <= 0))
return(1);
for (i = 0; i < num_matches; i++) {
/*
* I'm not sure why someone would do this...but...
*/
if (matches[i].flags == PCI_GETCONF_NO_MATCH)
continue;
/*
* Look at each of the match flags. If it's set, do the
* comparison. If the comparison fails, we don't have a
* match, go on to the next item if there is one.
*/
if (((matches[i].flags & PCI_GETCONF_MATCH_BUS) != 0)
&& (match_buf->pc_sel.pc_bus != matches[i].pc_sel.pc_bus))
continue;
if (((matches[i].flags & PCI_GETCONF_MATCH_DEV) != 0)
&& (match_buf->pc_sel.pc_dev != matches[i].pc_sel.pc_dev))
continue;
if (((matches[i].flags & PCI_GETCONF_MATCH_FUNC) != 0)
&& (match_buf->pc_sel.pc_func != matches[i].pc_sel.pc_func))
continue;
if (((matches[i].flags & PCI_GETCONF_MATCH_VENDOR) != 0)
&& (match_buf->pc_vendor != matches[i].pc_vendor))
continue;
if (((matches[i].flags & PCI_GETCONF_MATCH_DEVICE) != 0)
&& (match_buf->pc_device != matches[i].pc_device))
continue;
if (((matches[i].flags & PCI_GETCONF_MATCH_CLASS) != 0)
&& (match_buf->pc_class != matches[i].pc_class))
continue;
if (((matches[i].flags & PCI_GETCONF_MATCH_UNIT) != 0)
&& (match_buf->pd_unit != matches[i].pd_unit))
continue;
if (((matches[i].flags & PCI_GETCONF_MATCH_NAME) != 0)
&& (strncmp(matches[i].pd_name, match_buf->pd_name,
sizeof(match_buf->pd_name)) != 0))
continue;
return(0);
}
return(1);
}
On the new Meteor cards, the Philips SAA 7116 is connected to the PCI bus via an IBM PCI-PCI bridge (82351 or 82352 or 82353) The driver must identify if it is on a secondary PCI bus, which is created via the IBM PCI-PCI bridge. If it is, then it must initialise the IBM PCI-PCI bridge correctly. To do this, the following new functions are added. Because they use the pcici_t tag, they are considered 2.2 compatibility APIs pcici_t * pci_get_parent_from_tag(pcici_t tag); int pci_get_bus_from_tag(pcici_t tag); (The _from_tag suffix is used to prevent clashes with similarly named newbus PCI API functions) Submitted by: Anton Berezin <tobez@plab.ku.dk> Reviewed by: Doug Rabson <dfr@nlsystems.com> Reworked by: Me (roger)
1999-05-31 22:13:37 +00:00
/*
* Locate the parent of a PCI device by scanning the PCI devlist
* and return the entry for the parent.
* For devices on PCI Bus 0 (the host bus), this is the PCI Host.
* For devices on secondary PCI busses, this is that bus' PCI-PCI Bridge.
*/
pcicfgregs *
pci_devlist_get_parent(pcicfgregs *cfg)
{
struct devlist *devlist_head;
struct pci_devinfo *dinfo;
pcicfgregs *bridge_cfg;
int i;
dinfo = STAILQ_FIRST(devlist_head = &pci_devq);
/* If the device is on PCI bus 0, look for the host */
if (cfg->bus == 0) {
for (i = 0; (dinfo != NULL) && (i < pci_numdevs);
dinfo = STAILQ_NEXT(dinfo, pci_links), i++) {
bridge_cfg = &dinfo->cfg;
if (bridge_cfg->baseclass == PCIC_BRIDGE
&& bridge_cfg->subclass == PCIS_BRIDGE_HOST
&& bridge_cfg->bus == cfg->bus) {
return bridge_cfg;
}
}
}
/* If the device is not on PCI bus 0, look for the PCI-PCI bridge */
if (cfg->bus > 0) {
for (i = 0; (dinfo != NULL) && (i < pci_numdevs);
dinfo = STAILQ_NEXT(dinfo, pci_links), i++) {
bridge_cfg = &dinfo->cfg;
if (bridge_cfg->baseclass == PCIC_BRIDGE
&& bridge_cfg->subclass == PCIS_BRIDGE_PCI
&& bridge_cfg->secondarybus == cfg->bus) {
return bridge_cfg;
}
}
}
return NULL;
}
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
static int
This commit fixes various 64bit portability problems required for FreeBSD/alpha. The most significant item is to change the command argument to ioctl functions from int to u_long. This change brings us inline with various other BSD versions. Driver writers may like to use (__FreeBSD_version == 300003) to detect this change. The prototype FreeBSD/alpha machdep will follow in a couple of days time.
1998-06-07 17:13:14 +00:00
pci_ioctl(dev_t dev, u_long cmd, caddr_t data, int flag, struct proc *p)
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
{
struct pci_io *io;
For the ioctl that reads the pci configuration, look up the name and unit on the fly so that we can see the driver assignment of new pci devices as well in the 'pciconf -l' display.
1999-05-09 20:27:26 +00:00
const char *name;
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
int error;
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
if (!(flag & FWRITE))
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
return EPERM;
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
switch(cmd) {
case PCIOCGETCONF:
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
{
struct pci_devinfo *dinfo;
struct pci_conf_io *cio;
struct devlist *devlist_head;
struct pci_match_conf *pattern_buf;
int num_patterns;
size_t iolen;
int ionum, i;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
cio = (struct pci_conf_io *)data;
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
num_patterns = 0;
dinfo = NULL;
/*
* Hopefully the user won't pass in a null pointer, but it
* can't hurt to check.
*/
if (cio == NULL) {
error = EINVAL;
break;
}
/*
* If the user specified an offset into the device list,
* but the list has changed since they last called this
* ioctl, tell them that the list has changed. They will
* have to get the list from the beginning.
*/
if ((cio->offset != 0)
&& (cio->generation != pci_generation)){
cio->num_matches = 0;
cio->status = PCI_GETCONF_LIST_CHANGED;
error = 0;
break;
}
/*
* Check to see whether the user has asked for an offset
* past the end of our list.
*/
if (cio->offset >= pci_numdevs) {
cio->num_matches = 0;
cio->status = PCI_GETCONF_LAST_DEVICE;
error = 0;
break;
}
/* get the head of the device queue */
devlist_head = &pci_devq;
/*
* Determine how much room we have for pci_conf structures.
* Round the user's buffer size down to the nearest
* multiple of sizeof(struct pci_conf) in case the user
* didn't specify a multiple of that size.
*/
iolen = min(cio->match_buf_len -
(cio->match_buf_len % sizeof(struct pci_conf)),
pci_numdevs * sizeof(struct pci_conf));
/*
* Since we know that iolen is a multiple of the size of
* the pciconf union, it's okay to do this.
*/
ionum = iolen / sizeof(struct pci_conf);
/*
* If this test is true, the user wants the pci_conf
* structures returned to match the supplied entries.
*/
if ((cio->num_patterns > 0)
&& (cio->pat_buf_len > 0)) {
/*
* pat_buf_len needs to be:
* num_patterns * sizeof(struct pci_match_conf)
* While it is certainly possible the user just
* allocated a large buffer, but set the number of
* matches correctly, it is far more likely that
* their kernel doesn't match the userland utility
* they're using. It's also possible that the user
* forgot to initialize some variables. Yes, this
* may be overly picky, but I hazard to guess that
* it's far more likely to just catch folks that
* updated their kernel but not their userland.
*/
if ((cio->num_patterns *
sizeof(struct pci_match_conf)) != cio->pat_buf_len){
/* The user made a mistake, return an error*/
cio->status = PCI_GETCONF_ERROR;
printf("pci_ioctl: pat_buf_len %d != "
"num_patterns (%d) * sizeof(struct "
"pci_match_conf) (%d)\npci_ioctl: "
"pat_buf_len should be = %d\n",
cio->pat_buf_len, cio->num_patterns,
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
(int)sizeof(struct pci_match_conf),
(int)sizeof(struct pci_match_conf) *
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
cio->num_patterns);
printf("pci_ioctl: do your headers match your "
"kernel?\n");
cio->num_matches = 0;
error = EINVAL;
break;
}
/*
* Check the user's buffer to make sure it's readable.
*/
if ((error = useracc((caddr_t)cio->patterns,
cio->pat_buf_len, B_READ)) != 1){
s/%#p/%p/ to fix a warning. This looks like a leftover of once being %#x, which causes a leading 0x to be prepended. %p has this by default and the '#' is ignored by the kernel prinf code for %p.
1998-11-09 08:08:06 +00:00
printf("pci_ioctl: pattern buffer %p, "
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
"length %u isn't user accessible for"
Some workarounds for a common DEC pci-pci bridge found on alphas. Fix printf format errors which show up on the alpha.
1998-09-16 08:28:11 +00:00
" READ\n", cio->patterns,
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
cio->pat_buf_len);
error = EACCES;
break;
}
/*
* Allocate a buffer to hold the patterns.
*/
pattern_buf = malloc(cio->pat_buf_len, M_TEMP,
M_WAITOK);
error = copyin(cio->patterns, pattern_buf,
cio->pat_buf_len);
if (error != 0)
break;
num_patterns = cio->num_patterns;
} else if ((cio->num_patterns > 0)
|| (cio->pat_buf_len > 0)) {
/*
* The user made a mistake, spit out an error.
*/
cio->status = PCI_GETCONF_ERROR;
cio->num_matches = 0;
printf("pci_ioctl: invalid GETCONF arguments\n");
error = EINVAL;
break;
} else
pattern_buf = NULL;
/*
* Make sure we can write to the match buffer.
*/
if ((error = useracc((caddr_t)cio->matches, cio->match_buf_len,
B_WRITE)) != 1) {
s/%#p/%p/ to fix a warning. This looks like a leftover of once being %#x, which causes a leading 0x to be prepended. %p has this by default and the '#' is ignored by the kernel prinf code for %p.
1998-11-09 08:08:06 +00:00
printf("pci_ioctl: match buffer %p, length %u "
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
"isn't user accessible for WRITE\n",
Some workarounds for a common DEC pci-pci bridge found on alphas. Fix printf format errors which show up on the alpha.
1998-09-16 08:28:11 +00:00
cio->matches, cio->match_buf_len);
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
error = EACCES;
break;
}
/*
* Go through the list of devices and copy out the devices
* that match the user's criteria.
*/
for (cio->num_matches = 0, error = 0, i = 0,
dinfo = STAILQ_FIRST(devlist_head);
(dinfo != NULL) && (cio->num_matches < ionum)
&& (error == 0) && (i < pci_numdevs);
dinfo = STAILQ_NEXT(dinfo, pci_links), i++) {
if (i < cio->offset)
continue;
For the ioctl that reads the pci configuration, look up the name and unit on the fly so that we can see the driver assignment of new pci devices as well in the 'pciconf -l' display.
1999-05-09 20:27:26 +00:00
/* Populate pd_name and pd_unit */
name = NULL;
if (dinfo->cfg.dev && dinfo->conf.pd_name[0] == '\0')
name = device_get_name(dinfo->cfg.dev);
if (name) {
strncpy(dinfo->conf.pd_name, name,
sizeof(dinfo->conf.pd_name));
dinfo->conf.pd_name[PCI_MAXNAMELEN] = 0;
dinfo->conf.pd_unit =
device_get_unit(dinfo->cfg.dev);
}
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
if ((pattern_buf == NULL) ||
(pci_conf_match(pattern_buf, num_patterns,
&dinfo->conf) == 0)) {
/*
* If we've filled up the user's buffer,
* break out at this point. Since we've
* got a match here, we'll pick right back
* up at the matching entry. We can also
* tell the user that there are more matches
* left.
*/
if (cio->num_matches >= ionum)
break;
error = copyout(&dinfo->conf,
&cio->matches[cio->num_matches],
sizeof(struct pci_conf));
cio->num_matches++;
}
}
/*
* Set the pointer into the list, so if the user is getting
* n records at a time, where n < pci_numdevs,
*/
cio->offset = i;
/*
* Set the generation, the user will need this if they make
* another ioctl call with offset != 0.
*/
cio->generation = pci_generation;
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
/*
* If this is the last device, inform the user so he won't
* bother asking for more devices. If dinfo isn't NULL, we
* know that there are more matches in the list because of
* the way the traversal is done.
*/
if (dinfo == NULL)
cio->status = PCI_GETCONF_LAST_DEVICE;
else
cio->status = PCI_GETCONF_MORE_DEVS;
if (pattern_buf != NULL)
free(pattern_buf, M_TEMP);
break;
}
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
case PCIOCREAD:
io = (struct pci_io *)data;
switch(io->pi_width) {
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
pcicfgregs probe;
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
case 4:
case 2:
case 1:
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
probe.bus = io->pi_sel.pc_bus;
probe.slot = io->pi_sel.pc_dev;
probe.func = io->pi_sel.pc_func;
io->pi_data = pci_cfgread(&probe,
io->pi_reg, io->pi_width);
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
error = 0;
break;
default:
error = ENODEV;
break;
}
break;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
case PCIOCWRITE:
Add PCI LKM support.
1997-01-21 23:23:40 +00:00
io = (struct pci_io *)data;
switch(io->pi_width) {
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
pcicfgregs probe;
Add PCI LKM support.
1997-01-21 23:23:40 +00:00
case 4:
case 2:
case 1:
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
probe.bus = io->pi_sel.pc_bus;
probe.slot = io->pi_sel.pc_dev;
probe.func = io->pi_sel.pc_func;
pci_cfgwrite(&probe,
io->pi_reg, io->pi_data, io->pi_width);
error = 0;
break;
Add PCI LKM support.
1997-01-21 23:23:40 +00:00
default:
error = ENODEV;
break;
}
break;
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
default:
error = ENOTTY;
break;
}
return (error);
}
#define PCI_CDEV 78
static struct cdevsw pcicdev = {
This commit should be a extensive NO-OP: Reformat and initialize correctly all "struct cdevsw". Initialize the d_maj and d_bmaj fields. The d_reset field was not removed, although it is never used. I used a program to do most of this, so all the files now use the same consistent format. Please keep it that way. Vinum and i4b not modified, patches emailed to respective authors.
1999-05-30 16:53:49 +00:00
/* open */ pci_open,
/* close */ pci_close,
/* read */ noread,
/* write */ nowrite,
/* ioctl */ pci_ioctl,
/* stop */ nostop,
/* reset */ noreset,
/* devtotty */ nodevtotty,
/* poll */ nopoll,
/* mmap */ nommap,
/* strategy */ nostrategy,
/* name */ "pci",
/* parms */ noparms,
/* maj */ PCI_CDEV,
/* dump */ nodump,
/* psize */ nopsize,
/* flags */ 0,
/* maxio */ 0,
/* bmaj */ -1
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
};
#ifdef DEVFS
static void *pci_devfs_token;
#endif
static void
pci_cdevinit(void *dummy)
{
Simplify cdevsw registration. The cdevsw_add() function now finds the major number(s) in the struct cdevsw passed to it. cdevsw_add_generic() is no longer needed, cdevsw_add() does the same thing. cdevsw_add() will print an message if the d_maj field looks bogus. Remove nblkdev and nchrdev variables. Most places they were used bogusly. Instead check a dev_t for validity by seeing if devsw() or bdevsw() returns NULL. Move bdevsw() and devsw() functions to kern/kern_conf.c Bump __FreeBSD_version to 400006 This commit removes: 72 bogus makedev() calls 26 bogus SYSINIT functions if_xe.c bogusly accessed cdevsw[], author/maintainer please fix. I4b and vinum not changed. Patches emailed to authors. LINT probably broken until they catch up.
1999-05-31 11:29:30 +00:00
cdevsw_add(&pcicdev);
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
#ifdef DEVFS
pci_devfs_token = devfs_add_devswf(&pcicdev, 0, DV_CHR,
UID_ROOT, GID_WHEEL, 0644, "pci");
#endif
}
SYSINIT(pcidev, SI_SUB_DRIVERS, SI_ORDER_MIDDLE+PCI_CDEV, pci_cdevinit, NULL);
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
#include "pci_if.h"
/*
* A simple driver to wrap the old pci driver mechanism for back-compat.
*/
static int
pci_compat_probe(device_t dev)
{
struct pci_device *dvp;
struct pci_devinfo *dinfo;
pcicfgregs *cfg;
const char *name;
int error;
dinfo = device_get_ivars(dev);
cfg = &dinfo->cfg;
dvp = device_get_driver(dev)->priv;
/*
* Do the wrapped probe.
*/
error = ENXIO;
if (dvp && dvp->pd_probe) {
name = dvp->pd_probe(cfg, (cfg->device << 16) + cfg->vendor);
if (name) {
device_set_desc_copy(dev, name);
error = 0;
}
}
return error;
}
static int
pci_compat_attach(device_t dev)
{
struct pci_device *dvp;
struct pci_devinfo *dinfo;
pcicfgregs *cfg;
int unit;
dinfo = device_get_ivars(dev);
cfg = &dinfo->cfg;
dvp = device_get_driver(dev)->priv;
unit = device_get_unit(dev);
if (unit > *dvp->pd_count)
*dvp->pd_count = unit;
if (dvp->pd_attach)
dvp->pd_attach(cfg, unit);
return 0;
}
static device_method_t pci_compat_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, pci_compat_probe),
DEVMETHOD(device_attach, pci_compat_attach),
{ 0, 0 }
};
static devclass_t pci_devclass;
/*
* Create a new style driver around each old pci driver.
*/
Replace the pcidevice_set linker set based configuration mechanism for old style pci drivers with a simple one-line change to use a module that registers itself under new-bus and should in theory enable just about all of the pci drivers to be loadable (kldload and loader(8)) but without having the impact of converting the APIs yet. This also fixes the problem of having undefined variables when only new-style pci drivers are present.
1999-04-24 19:59:20 +00:00
int
Fix a goof on my part; s/struct moduledata */struct module */
1999-05-06 22:05:39 +00:00
compat_pci_handler(module_t mod, int type, void *data)
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
{
Replace the pcidevice_set linker set based configuration mechanism for old style pci drivers with a simple one-line change to use a module that registers itself under new-bus and should in theory enable just about all of the pci drivers to be loadable (kldload and loader(8)) but without having the impact of converting the APIs yet. This also fixes the problem of having undefined variables when only new-style pci drivers are present.
1999-04-24 19:59:20 +00:00
struct pci_device *dvp = (struct pci_device *)data;
driver_t *driver;
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
Replace the pcidevice_set linker set based configuration mechanism for old style pci drivers with a simple one-line change to use a module that registers itself under new-bus and should in theory enable just about all of the pci drivers to be loadable (kldload and loader(8)) but without having the impact of converting the APIs yet. This also fixes the problem of having undefined variables when only new-style pci drivers are present.
1999-04-24 19:59:20 +00:00
switch (type) {
case MOD_LOAD:
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
driver = malloc(sizeof(driver_t), M_DEVBUF, M_NOWAIT);
if (!driver)
Replace the pcidevice_set linker set based configuration mechanism for old style pci drivers with a simple one-line change to use a module that registers itself under new-bus and should in theory enable just about all of the pci drivers to be loadable (kldload and loader(8)) but without having the impact of converting the APIs yet. This also fixes the problem of having undefined variables when only new-style pci drivers are present.
1999-04-24 19:59:20 +00:00
return ENOMEM;
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
bzero(driver, sizeof(driver_t));
driver->name = dvp->pd_name;
driver->methods = pci_compat_methods;
driver->softc = sizeof(struct pci_devinfo *);
driver->priv = dvp;
devclass_add_driver(pci_devclass, driver);
Replace the pcidevice_set linker set based configuration mechanism for old style pci drivers with a simple one-line change to use a module that registers itself under new-bus and should in theory enable just about all of the pci drivers to be loadable (kldload and loader(8)) but without having the impact of converting the APIs yet. This also fixes the problem of having undefined variables when only new-style pci drivers are present.
1999-04-24 19:59:20 +00:00
break;
case MOD_UNLOAD:
Fix a goof on my part; s/struct moduledata */struct module */
1999-05-06 22:05:39 +00:00
printf("%s: module unload not supported!\n", dvp->pd_name);
Replace the pcidevice_set linker set based configuration mechanism for old style pci drivers with a simple one-line change to use a module that registers itself under new-bus and should in theory enable just about all of the pci drivers to be loadable (kldload and loader(8)) but without having the impact of converting the APIs yet. This also fixes the problem of having undefined variables when only new-style pci drivers are present.
1999-04-24 19:59:20 +00:00
return EOPNOTSUPP;
default:
break;
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
}
Replace the pcidevice_set linker set based configuration mechanism for old style pci drivers with a simple one-line change to use a module that registers itself under new-bus and should in theory enable just about all of the pci drivers to be loadable (kldload and loader(8)) but without having the impact of converting the APIs yet. This also fixes the problem of having undefined variables when only new-style pci drivers are present.
1999-04-24 19:59:20 +00:00
return 0;
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
}
/*
* New style pci driver. Parent device is either a pci-host-bridge or a
* pci-pci-bridge. Both kinds are represented by instances of pcib.
*/
static void
pci_print_verbose(struct pci_devinfo *dinfo)
{
if (bootverbose) {
int i;
pcicfgregs *cfg = &dinfo->cfg;
printf("found->\tvendor=0x%04x, dev=0x%04x, revid=0x%02x\n",
cfg->vendor, cfg->device, cfg->revid);
printf("\tclass=%02x-%02x-%02x, hdrtype=0x%02x, mfdev=%d\n",
cfg->baseclass, cfg->subclass, cfg->progif,
cfg->hdrtype, cfg->mfdev);
printf("\tsubordinatebus=%x \tsecondarybus=%x\n",
cfg->subordinatebus, cfg->secondarybus);
#ifdef PCI_DEBUG
printf("\tcmdreg=0x%04x, statreg=0x%04x, cachelnsz=%d (dwords)\n",
cfg->cmdreg, cfg->statreg, cfg->cachelnsz);
printf("\tlattimer=0x%02x (%d ns), mingnt=0x%02x (%d ns), maxlat=0x%02x (%d ns)\n",
cfg->lattimer, cfg->lattimer * 30,
cfg->mingnt, cfg->mingnt * 250, cfg->maxlat, cfg->maxlat * 250);
#endif /* PCI_DEBUG */
if (cfg->intpin > 0)
printf("\tintpin=%c, irq=%d\n", cfg->intpin +'a' -1, cfg->intline);
for (i = 0; i < cfg->nummaps; i++) {
pcimap *m = &cfg->map[i];
printf("\tmap[%d]: type %x, range %2d, base %08x, size %2d\n",
i, m->type, m->ln2range, m->base, m->ln2size);
}
}
}
static int
pci_add_children(device_t dev, int busno)
{
pcicfgregs probe;
int bushigh = busno;
#ifdef SIMOS
#undef PCI_SLOTMAX
#define PCI_SLOTMAX 0
#endif
bzero(&probe, sizeof probe);
Add support for multiple PCI "hoses" used on various alpha platforms. The specific intent of this commit is to pave the way for importing Compaq XP1000 support. These changes should not affect the i386 port. Reviewed by: Doug Rabson <dfr@nlsystems.com> (actually, he walked me through most of it & deserves more than reviewd-by credit )
1999-05-20 15:33:33 +00:00
#ifdef __alpha__
probe.hose = pcib_get_hose(dev);
#endif
#ifdef __i386__
probe.hose = 0;
#endif
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
probe.bus = busno;
Add support for multiple PCI "hoses" used on various alpha platforms. The specific intent of this commit is to pave the way for importing Compaq XP1000 support. These changes should not affect the i386 port. Reviewed by: Doug Rabson <dfr@nlsystems.com> (actually, he walked me through most of it & deserves more than reviewd-by credit )
1999-05-20 15:33:33 +00:00
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
for (probe.slot = 0; probe.slot <= PCI_SLOTMAX; probe.slot++) {
int pcifunchigh = 0;
for (probe.func = 0; probe.func <= pcifunchigh; probe.func++) {
struct pci_devinfo *dinfo = pci_readcfg(&probe);
if (dinfo != NULL) {
if (dinfo->cfg.mfdev)
pcifunchigh = 7;
pci_print_verbose(dinfo);
dinfo->cfg.dev =
device_add_child(dev, NULL, -1, dinfo);
if (bushigh < dinfo->cfg.subordinatebus)
bushigh = dinfo->cfg.subordinatebus;
if (bushigh < dinfo->cfg.secondarybus)
bushigh = dinfo->cfg.secondarybus;
}
}
}
return bushigh;
}
static int
pci_new_probe(device_t dev)
{
device_set_desc(dev, "PCI bus");
pci_add_children(dev, device_get_unit(dev));
return 0;
}
Alter the behavior of sys/kern/subr_bus.c:device_print_child() - device_print_child() either lets the BUS_PRINT_CHILD method produce the entire device announcement message or it prints "foo0: not found\n" Alter sys/kern/subr_bus.c:bus_generic_print_child() to take on the previous behavior of device_print_child() (printing the "foo0: <FooDevice 1.1>" bit of the announce message.) Provide bus_print_child_header() and bus_print_child_footer() to actually print the output for bus_generic_print_child(). These functions should be used whenever possible (unless you can just use bus_generic_print_child()) The BUS_PRINT_CHILD method now returns int instead of void. Modify everything else that defines or uses a BUS_PRINT_CHILD method to comply with the above changes. - Devices are 'on' a bus, not 'at' it. - If a custom BUS_PRINT_CHILD method does the same thing as bus_generic_print_child(), use bus_generic_print_child() - Use device_get_nameunit() instead of both device_get_name() and device_get_unit() - All BUS_PRINT_CHILD methods return the number of characters output. Reviewed by: dfr, peter
1999-07-29 01:03:04 +00:00
static int
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
pci_print_child(device_t dev, device_t child)
{
Print 'irq nn' on the device attach line like the old pci code did. However, we are not printing 'int a/b/c/d' yet, is it worth it on non-SMP systems? (It's useful when tracing PCI->IO-APIC routing on SMP systems)
1999-05-08 20:28:01 +00:00
struct pci_devinfo *dinfo;
pcicfgregs *cfg;
Alter the behavior of sys/kern/subr_bus.c:device_print_child() - device_print_child() either lets the BUS_PRINT_CHILD method produce the entire device announcement message or it prints "foo0: not found\n" Alter sys/kern/subr_bus.c:bus_generic_print_child() to take on the previous behavior of device_print_child() (printing the "foo0: <FooDevice 1.1>" bit of the announce message.) Provide bus_print_child_header() and bus_print_child_footer() to actually print the output for bus_generic_print_child(). These functions should be used whenever possible (unless you can just use bus_generic_print_child()) The BUS_PRINT_CHILD method now returns int instead of void. Modify everything else that defines or uses a BUS_PRINT_CHILD method to comply with the above changes. - Devices are 'on' a bus, not 'at' it. - If a custom BUS_PRINT_CHILD method does the same thing as bus_generic_print_child(), use bus_generic_print_child() - Use device_get_nameunit() instead of both device_get_name() and device_get_unit() - All BUS_PRINT_CHILD methods return the number of characters output. Reviewed by: dfr, peter
1999-07-29 01:03:04 +00:00
int retval = 0;
Print 'irq nn' on the device attach line like the old pci code did. However, we are not printing 'int a/b/c/d' yet, is it worth it on non-SMP systems? (It's useful when tracing PCI->IO-APIC routing on SMP systems)
1999-05-08 20:28:01 +00:00
dinfo = device_get_ivars(child);
cfg = &dinfo->cfg;
Alter the behavior of sys/kern/subr_bus.c:device_print_child() - device_print_child() either lets the BUS_PRINT_CHILD method produce the entire device announcement message or it prints "foo0: not found\n" Alter sys/kern/subr_bus.c:bus_generic_print_child() to take on the previous behavior of device_print_child() (printing the "foo0: <FooDevice 1.1>" bit of the announce message.) Provide bus_print_child_header() and bus_print_child_footer() to actually print the output for bus_generic_print_child(). These functions should be used whenever possible (unless you can just use bus_generic_print_child()) The BUS_PRINT_CHILD method now returns int instead of void. Modify everything else that defines or uses a BUS_PRINT_CHILD method to comply with the above changes. - Devices are 'on' a bus, not 'at' it. - If a custom BUS_PRINT_CHILD method does the same thing as bus_generic_print_child(), use bus_generic_print_child() - Use device_get_nameunit() instead of both device_get_name() and device_get_unit() - All BUS_PRINT_CHILD methods return the number of characters output. Reviewed by: dfr, peter
1999-07-29 01:03:04 +00:00
retval += bus_print_child_header(dev, child);
Print 'irq nn' on the device attach line like the old pci code did. However, we are not printing 'int a/b/c/d' yet, is it worth it on non-SMP systems? (It's useful when tracing PCI->IO-APIC routing on SMP systems)
1999-05-08 20:28:01 +00:00
if (cfg->intpin > 0 && cfg->intline != 255)
Alter the behavior of sys/kern/subr_bus.c:device_print_child() - device_print_child() either lets the BUS_PRINT_CHILD method produce the entire device announcement message or it prints "foo0: not found\n" Alter sys/kern/subr_bus.c:bus_generic_print_child() to take on the previous behavior of device_print_child() (printing the "foo0: <FooDevice 1.1>" bit of the announce message.) Provide bus_print_child_header() and bus_print_child_footer() to actually print the output for bus_generic_print_child(). These functions should be used whenever possible (unless you can just use bus_generic_print_child()) The BUS_PRINT_CHILD method now returns int instead of void. Modify everything else that defines or uses a BUS_PRINT_CHILD method to comply with the above changes. - Devices are 'on' a bus, not 'at' it. - If a custom BUS_PRINT_CHILD method does the same thing as bus_generic_print_child(), use bus_generic_print_child() - Use device_get_nameunit() instead of both device_get_name() and device_get_unit() - All BUS_PRINT_CHILD methods return the number of characters output. Reviewed by: dfr, peter
1999-07-29 01:03:04 +00:00
retval += printf(" irq %d", cfg->intline);
retval += printf(" at device %d.%d", pci_get_slot(child),
pci_get_function(child));
retval += bus_print_child_footer(dev, child);
return (retval);
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
}
Implement the BUS_PROBE_NOMATCH method for the PCI bus. This function is called for each device for which no driver was found. Output is similar to the eisa_probe_nomatch() function but with the added benefit of displaying the assigned IRQ (since PCI gives us this information up front.) Output is like so: pci0: unknown card CPQ0508 (vendor=0x0e11, dev=0x0508) at 11.0 irq 9 pci0: unknown card DFZ0508 (vendor=0x10da, dev=0x0508) at 11.0 irq 9 pci0: unknown card DBL0508 (vendor=0x104c, dev=0x0508) at 11.0 irq 9 pci0: unknown card DDM0011 (vendor=0x108d, dev=0x0011) at 11.0 irq 9 I'm not happy with the 3 lines of macro cruft that got added but I consider it a temporary annoyance as those bits will be moved to some place where PCI, EISA and ISAPNP code will be able to use them. (Not surprisingly, this message is longer than the code in question.) Reviewed by: peter, dfr
1999-07-27 04:28:14 +00:00
static void
pci_probe_nomatch(device_t dev, device_t child)
{
struct pci_devinfo *dinfo;
pcicfgregs *cfg;
dinfo = device_get_ivars(child);
cfg = &dinfo->cfg;
Case matters. DEv_METHOD to DEV_METHOD.
1999-07-27 05:08:36 +00:00
device_printf(dev, "unknown card %c%c%c%04x (vendor=0x%04x, dev=0x%04x) at %d.%d",
Implement the BUS_PROBE_NOMATCH method for the PCI bus. This function is called for each device for which no driver was found. Output is similar to the eisa_probe_nomatch() function but with the added benefit of displaying the assigned IRQ (since PCI gives us this information up front.) Output is like so: pci0: unknown card CPQ0508 (vendor=0x0e11, dev=0x0508) at 11.0 irq 9 pci0: unknown card DFZ0508 (vendor=0x10da, dev=0x0508) at 11.0 irq 9 pci0: unknown card DBL0508 (vendor=0x104c, dev=0x0508) at 11.0 irq 9 pci0: unknown card DDM0011 (vendor=0x108d, dev=0x0011) at 11.0 irq 9 I'm not happy with the 3 lines of macro cruft that got added but I consider it a temporary annoyance as those bits will be moved to some place where PCI, EISA and ISAPNP code will be able to use them. (Not surprisingly, this message is longer than the code in question.) Reviewed by: peter, dfr
1999-07-27 04:28:14 +00:00
PCI_MFCTR_CHAR0(cfg->vendor),
PCI_MFCTR_CHAR1(cfg->vendor),
PCI_MFCTR_CHAR2(cfg->vendor),
cfg->device,
cfg->vendor,
cfg->device,
pci_get_slot(child),
pci_get_function(child));
if (cfg->intpin > 0 && cfg->intline != 255) {
printf(" irq %d", cfg->intline);
}
printf("\n");
return;
}
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
static int
pci_read_ivar(device_t dev, device_t child, int which, u_long *result)
{
struct pci_devinfo *dinfo;
pcicfgregs *cfg;
dinfo = device_get_ivars(child);
cfg = &dinfo->cfg;
switch (which) {
case PCI_IVAR_SUBVENDOR:
*result = cfg->subvendor;
break;
case PCI_IVAR_SUBDEVICE:
*result = cfg->subdevice;
break;
case PCI_IVAR_VENDOR:
*result = cfg->vendor;
break;
case PCI_IVAR_DEVICE:
*result = cfg->device;
break;
case PCI_IVAR_DEVID:
*result = (cfg->device << 16) | cfg->vendor;
break;
case PCI_IVAR_CLASS:
*result = cfg->baseclass;
break;
case PCI_IVAR_SUBCLASS:
*result = cfg->subclass;
break;
case PCI_IVAR_PROGIF:
*result = cfg->progif;
break;
case PCI_IVAR_REVID:
*result = cfg->revid;
break;
case PCI_IVAR_INTPIN:
*result = cfg->intpin;
break;
case PCI_IVAR_IRQ:
*result = cfg->intline;
break;
case PCI_IVAR_BUS:
*result = cfg->bus;
break;
case PCI_IVAR_SLOT:
*result = cfg->slot;
break;
case PCI_IVAR_FUNCTION:
*result = cfg->func;
break;
case PCI_IVAR_SECONDARYBUS:
*result = cfg->secondarybus;
break;
case PCI_IVAR_SUBORDINATEBUS:
*result = cfg->subordinatebus;
break;
Add support for multiple PCI "hoses" used on various alpha platforms. The specific intent of this commit is to pave the way for importing Compaq XP1000 support. These changes should not affect the i386 port. Reviewed by: Doug Rabson <dfr@nlsystems.com> (actually, he walked me through most of it & deserves more than reviewd-by credit )
1999-05-20 15:33:33 +00:00
case PCI_IVAR_HOSE:
/*
* Pass up to parent bridge.
*/
*result = pcib_get_hose(dev);
break;
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
default:
return ENOENT;
}
return 0;
}
static int
pci_write_ivar(device_t dev, device_t child, int which, uintptr_t value)
{
struct pci_devinfo *dinfo;
pcicfgregs *cfg;
dinfo = device_get_ivars(child);
cfg = &dinfo->cfg;
switch (which) {
case PCI_IVAR_SUBVENDOR:
case PCI_IVAR_SUBDEVICE:
case PCI_IVAR_VENDOR:
case PCI_IVAR_DEVICE:
case PCI_IVAR_DEVID:
case PCI_IVAR_CLASS:
case PCI_IVAR_SUBCLASS:
case PCI_IVAR_PROGIF:
case PCI_IVAR_REVID:
case PCI_IVAR_INTPIN:
case PCI_IVAR_IRQ:
case PCI_IVAR_BUS:
case PCI_IVAR_SLOT:
case PCI_IVAR_FUNCTION:
return EINVAL; /* disallow for now */
case PCI_IVAR_SECONDARYBUS:
cfg->secondarybus = value;
break;
case PCI_IVAR_SUBORDINATEBUS:
cfg->subordinatebus = value;
break;
default:
return ENOENT;
}
return 0;
}
static int
pci_mapno(pcicfgregs *cfg, int reg)
{
int i, nummaps;
pcimap *map;
nummaps = cfg->nummaps;
map = cfg->map;
for (i = 0; i < nummaps; i++)
if (map[i].reg == reg)
return (i);
return (-1);
}
static int
pci_porten(pcicfgregs *cfg)
{
return ((cfg->cmdreg & PCIM_CMD_PORTEN) != 0);
}
static int
pci_isportmap(pcicfgregs *cfg, int map)
{
return ((unsigned)map < cfg->nummaps
&& (cfg->map[map].type & PCI_MAPPORT) != 0);
}
static int
pci_memen(pcicfgregs *cfg)
{
return ((cfg->cmdreg & PCIM_CMD_MEMEN) != 0);
}
static int
pci_ismemmap(pcicfgregs *cfg, int map)
{
return ((unsigned)map < cfg->nummaps
&& (cfg->map[map].type & PCI_MAPMEM) != 0);
}
static struct resource *
pci_alloc_resource(device_t dev, device_t child, int type, int *rid,
u_long start, u_long end, u_long count, u_int flags)
{
int isdefault;
struct pci_devinfo *dinfo = device_get_ivars(child);
pcicfgregs *cfg = &dinfo->cfg;
struct resource *rv, **rvp = 0;
int map;
isdefault = (device_get_parent(child) == dev
In pci_alloc_resource() only check start and end to see if its a default.
1999-05-30 10:54:31 +00:00
&& start == 0UL && end == ~0UL);
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
switch (type) {
case SYS_RES_IRQ:
if (*rid != 0)
return 0;
if (isdefault && cfg->intline != 255) {
start = cfg->intline;
end = cfg->intline;
count = 1;
}
break;
case SYS_RES_DRQ: /* passthru for child isa */
break;
Add support for SYS_RES_DENSE and SYS_RES_BWX resource types. These are equivalent to SYS_RES_MEMORY for x86 but for alpha, the rman_get_virtual() address of the resource is initialised to point into either dense-mapped or bwx-mapped space respectively, allowing direct memory pointers to be used to device memory. Reviewed by: Andrew Gallatin <gallatin@cs.duke.edu>
1999-07-28 07:57:48 +00:00
#ifdef __alpha__
case SYS_RES_DENSE:
case SYS_RES_BWX:
#endif
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
case SYS_RES_MEMORY:
if (isdefault) {
map = pci_mapno(cfg, *rid);
if (pci_memen(cfg) && pci_ismemmap(cfg, map)) {
start = cfg->map[map].base;
count = 1 << cfg->map[map].ln2size;
end = start + count;
rvp = &cfg->map[map].res;
} else
return 0;
}
break;
case SYS_RES_IOPORT:
if (isdefault) {
map = pci_mapno(cfg, *rid);
if (pci_porten(cfg) && pci_isportmap(cfg, map)) {
start = cfg->map[map].base;
count = 1 << cfg->map[map].ln2size;
end = start + count;
rvp = &cfg->map[map].res;
} else
return 0;
}
break;
default:
return 0;
}
rv = BUS_ALLOC_RESOURCE(device_get_parent(dev), child,
type, rid, start, end, count, flags);
if (rvp)
*rvp = rv;
return rv;
}
static int
pci_release_resource(device_t dev, device_t child, int type, int rid,
struct resource *r)
{
int rv;
struct pci_devinfo *dinfo = device_get_ivars(child);
pcicfgregs *cfg = &dinfo->cfg;
int map = 0;
switch (type) {
case SYS_RES_IRQ:
if (rid != 0)
return EINVAL;
break;
case SYS_RES_DRQ: /* passthru for child isa */
break;
Add support for SYS_RES_DENSE and SYS_RES_BWX resource types. These are equivalent to SYS_RES_MEMORY for x86 but for alpha, the rman_get_virtual() address of the resource is initialised to point into either dense-mapped or bwx-mapped space respectively, allowing direct memory pointers to be used to device memory. Reviewed by: Andrew Gallatin <gallatin@cs.duke.edu>
1999-07-28 07:57:48 +00:00
#ifdef __alpha__
case SYS_RES_DENSE:
case SYS_RES_BWX:
#endif
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
case SYS_RES_MEMORY:
case SYS_RES_IOPORT:
/*
* Only check the map registers if this is a direct
* descendant.
*/
if (device_get_parent(child) == dev)
map = pci_mapno(cfg, rid);
else
map = -1;
break;
default:
return (ENOENT);
}
rv = BUS_RELEASE_RESOURCE(device_get_parent(dev), child, type, rid, r);
if (rv == 0) {
switch (type) {
case SYS_RES_IRQ:
cfg->irqres = 0;
break;
case SYS_RES_DRQ: /* passthru for child isa */
break;
Add support for SYS_RES_DENSE and SYS_RES_BWX resource types. These are equivalent to SYS_RES_MEMORY for x86 but for alpha, the rman_get_virtual() address of the resource is initialised to point into either dense-mapped or bwx-mapped space respectively, allowing direct memory pointers to be used to device memory. Reviewed by: Andrew Gallatin <gallatin@cs.duke.edu>
1999-07-28 07:57:48 +00:00
#ifdef __alpha__
case SYS_RES_DENSE:
case SYS_RES_BWX:
#endif
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
case SYS_RES_MEMORY:
case SYS_RES_IOPORT:
if (map != -1)
cfg->map[map].res = 0;
break;
default:
return ENOENT;
}
}
return rv;
}
static u_int32_t
pci_read_config_method(device_t dev, device_t child, int reg, int width)
{
struct pci_devinfo *dinfo = device_get_ivars(child);
pcicfgregs *cfg = &dinfo->cfg;
return pci_cfgread(cfg, reg, width);
}
static void
pci_write_config_method(device_t dev, device_t child, int reg,
u_int32_t val, int width)
{
struct pci_devinfo *dinfo = device_get_ivars(child);
pcicfgregs *cfg = &dinfo->cfg;
pci_cfgwrite(cfg, reg, val, width);
}
static int
pci_modevent(module_t mod, int what, void *arg)
{
switch (what) {
case MOD_LOAD:
Argh, don't clobber the pci device list if there are multiple busses! (An AGP counts as a PCI bus, it seems...) This stopped 'pciconf -l' from working on AGP or PCI->PCI bridge systems.
1999-05-09 15:54:04 +00:00
STAILQ_INIT(&pci_devq);
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
break;
case MOD_UNLOAD:
break;
}
return 0;
}
static device_method_t pci_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, pci_new_probe),
DEVMETHOD(device_attach, bus_generic_attach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
Add missing suspend/resume methods.
1999-05-10 17:56:23 +00:00
DEVMETHOD(device_suspend, bus_generic_suspend),
DEVMETHOD(device_resume, bus_generic_resume),
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
/* Bus interface */
DEVMETHOD(bus_print_child, pci_print_child),
Case matters. DEv_METHOD to DEV_METHOD.
1999-07-27 05:08:36 +00:00
DEVMETHOD(bus_probe_nomatch, pci_probe_nomatch),
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
DEVMETHOD(bus_read_ivar, pci_read_ivar),
DEVMETHOD(bus_write_ivar, pci_write_ivar),
DEVMETHOD(bus_driver_added, bus_generic_driver_added),
DEVMETHOD(bus_alloc_resource, pci_alloc_resource),
DEVMETHOD(bus_release_resource, pci_release_resource),
DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
DEVMETHOD(bus_setup_intr, bus_generic_setup_intr),
DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
/* PCI interface */
DEVMETHOD(pci_read_config, pci_read_config_method),
DEVMETHOD(pci_write_config, pci_write_config_method),
{ 0, 0 }
};
static driver_t pci_driver = {
"pci",
pci_methods,
1, /* no softc */
};
DRIVER_MODULE(pci, pcib, pci_driver, pci_devclass, pci_modevent, 0);
Reference in New Issue Copy Permalink