d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
6840adf6da
freebsd-dev/sys/netipsec/key.c

7848 lines
196 KiB
C
Raw Normal View History

"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* $FreeBSD$ */
/* $KAME: key.c,v 1.191 2001/06/27 10:46:49 sakane Exp $ */
/* -> /*- for license, minor formatting changes
2005-01-07 01:45:51 +00:00
/*-
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
* Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the project nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* This code is referd to RFC 2367
*/
#include "opt_inet.h"
#include "opt_inet6.h"
#include "opt_ipsec.h"
#include <sys/types.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
#include <sys/lock.h>
#include <sys/mutex.h>
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
#include <sys/mbuf.h>
#include <sys/domain.h>
#include <sys/protosw.h>
#include <sys/malloc.h>
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
#include <sys/rmlock.h>
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
#include <sys/socket.h>
#include <sys/socketvar.h>
#include <sys/sysctl.h>
#include <sys/errno.h>
#include <sys/proc.h>
#include <sys/queue.h>
Prevent disappearing SAD entries by implementing MPsafe refcounting. "Why didn't he use SECASVAR_LOCK()/SECASVAR_UNLOCK() macros to synchronize access to the secasvar structure's fields?" one may ask. There were two reasons: 1. refcount(9) is faster then mutex(9) synchronization (one atomic operation instead of two). 2. Those macros are not used now at all, so at some point we may decide to remove them entirely. OK'ed by: gnn MFC after: 2 weeks
2006-05-20 15:35:36 +00:00
#include <sys/refcount.h>
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
#include <sys/syslog.h>
#include <net/if.h>
The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare to this event, adding if_var.h to files that do need it. Also, include all includes that now are included due to implicit pollution via if_var.h Sponsored by: Netflix Sponsored by: Nginx, Inc.
2013-10-26 17:58:36 +00:00
#include <net/if_var.h>
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
#include <net/vnet.h>
The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare to this event, adding if_var.h to files that do need it. Also, include all includes that now are included due to implicit pollution via if_var.h Sponsored by: Netflix Sponsored by: Nginx, Inc.
2013-10-26 17:58:36 +00:00
#include <net/raw_cb.h>
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/ip.h>
#include <netinet/in_var.h>
#ifdef INET6
#include <netinet/ip6.h>
#include <netinet6/in6_var.h>
#include <netinet6/ip6_var.h>
#endif /* INET6 */
Make IPsec compile without INET adding appropriate #ifdef checks. Unfold the IPSEC_COMMON_INPUT_CB() macro in xform_{ah,esp,ipcomp}.c to not need three different versions depending on INET, INET6 or both. Mark two places preparing for not yet supported functionality with IPv6. Reviewed by: gnn Sponsored by: The FreeBSD Foundation Sponsored by: iXsystems MFC after: 4 days
2011-04-27 19:28:42 +00:00
#if defined(INET) || defined(INET6)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
#include <netinet/in_pcb.h>
#endif
#ifdef INET6
#include <netinet6/in6_pcb.h>
#endif /* INET6 */
#include <net/pfkeyv2.h>
#include <netipsec/keydb.h>
#include <netipsec/key.h>
#include <netipsec/keysock.h>
#include <netipsec/key_debug.h>
#include <netipsec/ipsec.h>
#ifdef INET6
#include <netipsec/ipsec6.h>
#endif
#include <netipsec/xform.h>
#include <machine/stdarg.h>
/* randomness */
#include <sys/random.h>
#define FULLMASK 0xff
#define _BITS(bytes) ((bytes) << 3)
/*
* Note on SA reference counting:
* - SAs that are not in DEAD state will have (total external reference + 1)
* following value in reference count field. they cannot be freed and are
* referenced from SA header.
* - SAs that are in DEAD state will have (total external reference)
* in reference count field. they are ready to be freed. reference from
* SA header will be removed in key_delsav(), when the reference count
* field hits 0 (= no external reference other than from SA header.
*/
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
VNET_DEFINE(u_int32_t, key_debug_level) = 0;
After some off-list discussion, revert a number of changes to the DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various people working on the affected files. A better long-term solution is still being considered. This reversal may give some modules empty set_pcpu or set_vnet sections, but these are harmless. Changes reverted: ------------------------------------------------------------------------ r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines Instead of unconditionally emitting .globl's for the __start_set_xxx and __stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu sections are actually defined. ------------------------------------------------------------------------ r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout the tree. ------------------------------------------------------------------------ r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.
2010-11-22 19:32:54 +00:00
static VNET_DEFINE(u_int, key_spi_trycnt) = 1000;
static VNET_DEFINE(u_int32_t, key_spi_minval) = 0x100;
static VNET_DEFINE(u_int32_t, key_spi_maxval) = 0x0fffffff; /* XXX */
static VNET_DEFINE(u_int32_t, policy_id) = 0;
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
/*interval to initialize randseed,1(m)*/
After some off-list discussion, revert a number of changes to the DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various people working on the affected files. A better long-term solution is still being considered. This reversal may give some modules empty set_pcpu or set_vnet sections, but these are harmless. Changes reverted: ------------------------------------------------------------------------ r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines Instead of unconditionally emitting .globl's for the __start_set_xxx and __stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu sections are actually defined. ------------------------------------------------------------------------ r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout the tree. ------------------------------------------------------------------------ r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.
2010-11-22 19:32:54 +00:00
static VNET_DEFINE(u_int, key_int_random) = 60;
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
/* interval to expire acquiring, 30(s)*/
After some off-list discussion, revert a number of changes to the DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various people working on the affected files. A better long-term solution is still being considered. This reversal may give some modules empty set_pcpu or set_vnet sections, but these are harmless. Changes reverted: ------------------------------------------------------------------------ r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines Instead of unconditionally emitting .globl's for the __start_set_xxx and __stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu sections are actually defined. ------------------------------------------------------------------------ r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout the tree. ------------------------------------------------------------------------ r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.
2010-11-22 19:32:54 +00:00
static VNET_DEFINE(u_int, key_larval_lifetime) = 30;
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
/* counter for blocking SADB_ACQUIRE.*/
After some off-list discussion, revert a number of changes to the DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various people working on the affected files. A better long-term solution is still being considered. This reversal may give some modules empty set_pcpu or set_vnet sections, but these are harmless. Changes reverted: ------------------------------------------------------------------------ r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines Instead of unconditionally emitting .globl's for the __start_set_xxx and __stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu sections are actually defined. ------------------------------------------------------------------------ r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout the tree. ------------------------------------------------------------------------ r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.
2010-11-22 19:32:54 +00:00
static VNET_DEFINE(int, key_blockacq_count) = 10;
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
/* lifetime for blocking SADB_ACQUIRE.*/
After some off-list discussion, revert a number of changes to the DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various people working on the affected files. A better long-term solution is still being considered. This reversal may give some modules empty set_pcpu or set_vnet sections, but these are harmless. Changes reverted: ------------------------------------------------------------------------ r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines Instead of unconditionally emitting .globl's for the __start_set_xxx and __stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu sections are actually defined. ------------------------------------------------------------------------ r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout the tree. ------------------------------------------------------------------------ r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.
2010-11-22 19:32:54 +00:00
static VNET_DEFINE(int, key_blockacq_lifetime) = 20;
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
/* preferred old sa rather than new sa.*/
After some off-list discussion, revert a number of changes to the DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various people working on the affected files. A better long-term solution is still being considered. This reversal may give some modules empty set_pcpu or set_vnet sections, but these are harmless. Changes reverted: ------------------------------------------------------------------------ r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines Instead of unconditionally emitting .globl's for the __start_set_xxx and __stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu sections are actually defined. ------------------------------------------------------------------------ r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout the tree. ------------------------------------------------------------------------ r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.
2010-11-22 19:32:54 +00:00
static VNET_DEFINE(int, key_preferred_oldsa) = 1;
MFP4: @176978-176982, 176984, 176990-176994, 177441 "Whitspace" churn after the VIMAGE/VNET whirls. Remove the need for some "init" functions within the network stack, like pim6_init(), icmp_init() or significantly shorten others like ip6_init() and nd6_init(), using static initialization again where possible and formerly missed. Move (most) variables back to the place they used to be before the container structs and VIMAGE_GLOABLS (before r185088) and try to reduce the diff to stable/7 and earlier as good as possible, to help out-of-tree consumers to update from 6.x or 7.x to 8 or 9. This also removes some header file pollution for putatively static global variables. Revert VIMAGE specific changes in ipfilter::ip_auth.c, that are no longer needed. Reviewed by: jhb Discussed with: rwatson Sponsored by: The FreeBSD Foundation Sponsored by: CK Software GmbH MFC after: 6 days
2010-04-29 11:52:42 +00:00
#define V_key_spi_trycnt VNET(key_spi_trycnt)
#define V_key_spi_minval VNET(key_spi_minval)
#define V_key_spi_maxval VNET(key_spi_maxval)
#define V_policy_id VNET(policy_id)
#define V_key_int_random VNET(key_int_random)
#define V_key_larval_lifetime VNET(key_larval_lifetime)
#define V_key_blockacq_count VNET(key_blockacq_count)
#define V_key_blockacq_lifetime VNET(key_blockacq_lifetime)
Remove unused VNET_SET() and related macros; only VNET_GET() is ever actually used. Rename VNET_GET() to VNET() to shorten variable references. Discussed with: bz, julian Reviewed by: bz Approved by: re (kensmith, kib)
2009-07-16 21:13:04 +00:00
#define V_key_preferred_oldsa VNET(key_preferred_oldsa)
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
After some off-list discussion, revert a number of changes to the DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various people working on the affected files. A better long-term solution is still being considered. This reversal may give some modules empty set_pcpu or set_vnet sections, but these are harmless. Changes reverted: ------------------------------------------------------------------------ r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines Instead of unconditionally emitting .globl's for the __start_set_xxx and __stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu sections are actually defined. ------------------------------------------------------------------------ r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout the tree. ------------------------------------------------------------------------ r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.
2010-11-22 19:32:54 +00:00
static VNET_DEFINE(u_int32_t, acq_seq) = 0;
Remove unused VNET_SET() and related macros; only VNET_GET() is ever actually used. Rename VNET_GET() to VNET() to shorten variable references. Discussed with: bz, julian Reviewed by: bz Approved by: re (kensmith, kib)
2009-07-16 21:13:04 +00:00
#define V_acq_seq VNET(acq_seq)
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
/* SPD */
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
static VNET_DEFINE(TAILQ_HEAD(_sptree, secpolicy), sptree[IPSEC_DIR_MAX]);
static struct rmlock sptree_lock;
Remove unused VNET_SET() and related macros; only VNET_GET() is ever actually used. Rename VNET_GET() to VNET() to shorten variable references. Discussed with: bz, julian Reviewed by: bz Approved by: re (kensmith, kib)
2009-07-16 21:13:04 +00:00
#define V_sptree VNET(sptree)
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
#define SPTREE_LOCK_INIT() rm_init(&sptree_lock, "sptree")
#define SPTREE_LOCK_DESTROY() rm_destroy(&sptree_lock)
#define SPTREE_RLOCK_TRACKER struct rm_priotracker sptree_tracker
#define SPTREE_RLOCK() rm_rlock(&sptree_lock, &sptree_tracker)
#define SPTREE_RUNLOCK() rm_runlock(&sptree_lock, &sptree_tracker)
#define SPTREE_RLOCK_ASSERT() rm_assert(&sptree_lock, RA_RLOCKED)
#define SPTREE_WLOCK() rm_wlock(&sptree_lock)
#define SPTREE_WUNLOCK() rm_wunlock(&sptree_lock)
#define SPTREE_WLOCK_ASSERT() rm_assert(&sptree_lock, RA_WLOCKED)
#define SPTREE_UNLOCK_ASSERT() rm_assert(&sptree_lock, RA_UNLOCKED)
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
After some off-list discussion, revert a number of changes to the DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various people working on the affected files. A better long-term solution is still being considered. This reversal may give some modules empty set_pcpu or set_vnet sections, but these are harmless. Changes reverted: ------------------------------------------------------------------------ r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines Instead of unconditionally emitting .globl's for the __start_set_xxx and __stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu sections are actually defined. ------------------------------------------------------------------------ r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout the tree. ------------------------------------------------------------------------ r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.
2010-11-22 19:32:54 +00:00
static VNET_DEFINE(LIST_HEAD(_sahtree, secashead), sahtree); /* SAD */
Remove unused VNET_SET() and related macros; only VNET_GET() is ever actually used. Rename VNET_GET() to VNET() to shorten variable references. Discussed with: bz, julian Reviewed by: bz Approved by: re (kensmith, kib)
2009-07-16 21:13:04 +00:00
#define V_sahtree VNET(sahtree)
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
static struct mtx sahtree_lock;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
#define SAHTREE_LOCK_INIT() \
mtx_init(&sahtree_lock, "sahtree", \
"fast ipsec security association database", MTX_DEF)
#define SAHTREE_LOCK_DESTROY() mtx_destroy(&sahtree_lock)
#define SAHTREE_LOCK() mtx_lock(&sahtree_lock)
#define SAHTREE_UNLOCK() mtx_unlock(&sahtree_lock)
#define SAHTREE_LOCK_ASSERT() mtx_assert(&sahtree_lock, MA_OWNED)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* registed list */
After some off-list discussion, revert a number of changes to the DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various people working on the affected files. A better long-term solution is still being considered. This reversal may give some modules empty set_pcpu or set_vnet sections, but these are harmless. Changes reverted: ------------------------------------------------------------------------ r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines Instead of unconditionally emitting .globl's for the __start_set_xxx and __stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu sections are actually defined. ------------------------------------------------------------------------ r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout the tree. ------------------------------------------------------------------------ r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.
2010-11-22 19:32:54 +00:00
static VNET_DEFINE(LIST_HEAD(_regtree, secreg), regtree[SADB_SATYPE_MAX + 1]);
Remove unused VNET_SET() and related macros; only VNET_GET() is ever actually used. Rename VNET_GET() to VNET() to shorten variable references. Discussed with: bz, julian Reviewed by: bz Approved by: re (kensmith, kib)
2009-07-16 21:13:04 +00:00
#define V_regtree VNET(regtree)
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
static struct mtx regtree_lock;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
#define REGTREE_LOCK_INIT() \
mtx_init(&regtree_lock, "regtree", "fast ipsec regtree", MTX_DEF)
#define REGTREE_LOCK_DESTROY() mtx_destroy(&regtree_lock)
#define REGTREE_LOCK() mtx_lock(&regtree_lock)
#define REGTREE_UNLOCK() mtx_unlock(&regtree_lock)
#define REGTREE_LOCK_ASSERT() mtx_assert(&regtree_lock, MA_OWNED)
After some off-list discussion, revert a number of changes to the DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various people working on the affected files. A better long-term solution is still being considered. This reversal may give some modules empty set_pcpu or set_vnet sections, but these are harmless. Changes reverted: ------------------------------------------------------------------------ r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines Instead of unconditionally emitting .globl's for the __start_set_xxx and __stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu sections are actually defined. ------------------------------------------------------------------------ r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout the tree. ------------------------------------------------------------------------ r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.
2010-11-22 19:32:54 +00:00
static VNET_DEFINE(LIST_HEAD(_acqtree, secacq), acqtree); /* acquiring list */
Remove unused VNET_SET() and related macros; only VNET_GET() is ever actually used. Rename VNET_GET() to VNET() to shorten variable references. Discussed with: bz, julian Reviewed by: bz Approved by: re (kensmith, kib)
2009-07-16 21:13:04 +00:00
#define V_acqtree VNET(acqtree)
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
static struct mtx acq_lock;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
#define ACQ_LOCK_INIT() \
mtx_init(&acq_lock, "acqtree", "fast ipsec acquire list", MTX_DEF)
#define ACQ_LOCK_DESTROY() mtx_destroy(&acq_lock)
#define ACQ_LOCK() mtx_lock(&acq_lock)
#define ACQ_UNLOCK() mtx_unlock(&acq_lock)
#define ACQ_LOCK_ASSERT() mtx_assert(&acq_lock, MA_OWNED)
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
/* SP acquiring list */
After some off-list discussion, revert a number of changes to the DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various people working on the affected files. A better long-term solution is still being considered. This reversal may give some modules empty set_pcpu or set_vnet sections, but these are harmless. Changes reverted: ------------------------------------------------------------------------ r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines Instead of unconditionally emitting .globl's for the __start_set_xxx and __stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu sections are actually defined. ------------------------------------------------------------------------ r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout the tree. ------------------------------------------------------------------------ r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.
2010-11-22 19:32:54 +00:00
static VNET_DEFINE(LIST_HEAD(_spacqtree, secspacq), spacqtree);
Remove unused VNET_SET() and related macros; only VNET_GET() is ever actually used. Rename VNET_GET() to VNET() to shorten variable references. Discussed with: bz, julian Reviewed by: bz Approved by: re (kensmith, kib)
2009-07-16 21:13:04 +00:00
#define V_spacqtree VNET(spacqtree)
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
static struct mtx spacq_lock;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
#define SPACQ_LOCK_INIT() \
mtx_init(&spacq_lock, "spacqtree", \
"fast ipsec security policy acquire list", MTX_DEF)
#define SPACQ_LOCK_DESTROY() mtx_destroy(&spacq_lock)
#define SPACQ_LOCK() mtx_lock(&spacq_lock)
#define SPACQ_UNLOCK() mtx_unlock(&spacq_lock)
#define SPACQ_LOCK_ASSERT() mtx_assert(&spacq_lock, MA_OWNED)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* search order for SAs */
add support to prefer old SA to new SA during allocation (makes net.key.preferred_oldsa work as for KAME) Submitted by: gabor@sentex.net Reviewed by: Bjoern A. Zeeb MFC after: 1 day
2004-05-03 03:29:21 +00:00
static const u_int saorder_state_valid_prefer_old[] = {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
SADB_SASTATE_DYING, SADB_SASTATE_MATURE,
add support to prefer old SA to new SA during allocation (makes net.key.preferred_oldsa work as for KAME) Submitted by: gabor@sentex.net Reviewed by: Bjoern A. Zeeb MFC after: 1 day
2004-05-03 03:29:21 +00:00
};
static const u_int saorder_state_valid_prefer_new[] = {
SADB_SASTATE_MATURE, SADB_SASTATE_DYING,
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
};
Merge more of currently non-functional (i.e. resolving to whitespace) macros from p4/vimage branch. Do a better job at enclosing all instantiations of globals scheduled for virtualization in #ifdef VIMAGE_GLOBALS blocks. De-virtualize and mark as const saorder_state_alive and saorder_state_any arrays from ipsec code, given that they are never updated at runtime, so virtualizing them would be pointless. Reviewed by: bz, julian Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-11-26 22:32:07 +00:00
static const u_int saorder_state_alive[] = {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* except DEAD */
SADB_SASTATE_MATURE, SADB_SASTATE_DYING, SADB_SASTATE_LARVAL
};
Merge more of currently non-functional (i.e. resolving to whitespace) macros from p4/vimage branch. Do a better job at enclosing all instantiations of globals scheduled for virtualization in #ifdef VIMAGE_GLOBALS blocks. De-virtualize and mark as const saorder_state_alive and saorder_state_any arrays from ipsec code, given that they are never updated at runtime, so virtualizing them would be pointless. Reviewed by: bz, julian Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-11-26 22:32:07 +00:00
static const u_int saorder_state_any[] = {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
SADB_SASTATE_MATURE, SADB_SASTATE_DYING,
SADB_SASTATE_LARVAL, SADB_SASTATE_DEAD
};
static const int minsize[] = {
sizeof(struct sadb_msg), /* SADB_EXT_RESERVED */
sizeof(struct sadb_sa), /* SADB_EXT_SA */
sizeof(struct sadb_lifetime), /* SADB_EXT_LIFETIME_CURRENT */
sizeof(struct sadb_lifetime), /* SADB_EXT_LIFETIME_HARD */
sizeof(struct sadb_lifetime), /* SADB_EXT_LIFETIME_SOFT */
sizeof(struct sadb_address), /* SADB_EXT_ADDRESS_SRC */
sizeof(struct sadb_address), /* SADB_EXT_ADDRESS_DST */
sizeof(struct sadb_address), /* SADB_EXT_ADDRESS_PROXY */
sizeof(struct sadb_key), /* SADB_EXT_KEY_AUTH */
sizeof(struct sadb_key), /* SADB_EXT_KEY_ENCRYPT */
sizeof(struct sadb_ident), /* SADB_EXT_IDENTITY_SRC */
sizeof(struct sadb_ident), /* SADB_EXT_IDENTITY_DST */
sizeof(struct sadb_sens), /* SADB_EXT_SENSITIVITY */
sizeof(struct sadb_prop), /* SADB_EXT_PROPOSAL */
sizeof(struct sadb_supported), /* SADB_EXT_SUPPORTED_AUTH */
sizeof(struct sadb_supported), /* SADB_EXT_SUPPORTED_ENCRYPT */
sizeof(struct sadb_spirange), /* SADB_EXT_SPIRANGE */
0, /* SADB_X_EXT_KMPRIVATE */
sizeof(struct sadb_x_policy), /* SADB_X_EXT_POLICY */
sizeof(struct sadb_x_sa2), /* SADB_X_SA2 */
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
sizeof(struct sadb_x_nat_t_type),/* SADB_X_EXT_NAT_T_TYPE */
sizeof(struct sadb_x_nat_t_port),/* SADB_X_EXT_NAT_T_SPORT */
sizeof(struct sadb_x_nat_t_port),/* SADB_X_EXT_NAT_T_DPORT */
sizeof(struct sadb_address), /* SADB_X_EXT_NAT_T_OAI */
sizeof(struct sadb_address), /* SADB_X_EXT_NAT_T_OAR */
sizeof(struct sadb_x_nat_t_frag),/* SADB_X_EXT_NAT_T_FRAG */
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
};
static const int maxsize[] = {
sizeof(struct sadb_msg), /* SADB_EXT_RESERVED */
sizeof(struct sadb_sa), /* SADB_EXT_SA */
sizeof(struct sadb_lifetime), /* SADB_EXT_LIFETIME_CURRENT */
sizeof(struct sadb_lifetime), /* SADB_EXT_LIFETIME_HARD */
sizeof(struct sadb_lifetime), /* SADB_EXT_LIFETIME_SOFT */
0, /* SADB_EXT_ADDRESS_SRC */
0, /* SADB_EXT_ADDRESS_DST */
0, /* SADB_EXT_ADDRESS_PROXY */
0, /* SADB_EXT_KEY_AUTH */
0, /* SADB_EXT_KEY_ENCRYPT */
0, /* SADB_EXT_IDENTITY_SRC */
0, /* SADB_EXT_IDENTITY_DST */
0, /* SADB_EXT_SENSITIVITY */
0, /* SADB_EXT_PROPOSAL */
0, /* SADB_EXT_SUPPORTED_AUTH */
0, /* SADB_EXT_SUPPORTED_ENCRYPT */
sizeof(struct sadb_spirange), /* SADB_EXT_SPIRANGE */
0, /* SADB_X_EXT_KMPRIVATE */
0, /* SADB_X_EXT_POLICY */
sizeof(struct sadb_x_sa2), /* SADB_X_SA2 */
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
sizeof(struct sadb_x_nat_t_type),/* SADB_X_EXT_NAT_T_TYPE */
sizeof(struct sadb_x_nat_t_port),/* SADB_X_EXT_NAT_T_SPORT */
sizeof(struct sadb_x_nat_t_port),/* SADB_X_EXT_NAT_T_DPORT */
0, /* SADB_X_EXT_NAT_T_OAI */
0, /* SADB_X_EXT_NAT_T_OAR */
sizeof(struct sadb_x_nat_t_frag),/* SADB_X_EXT_NAT_T_FRAG */
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
};
After some off-list discussion, revert a number of changes to the DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various people working on the affected files. A better long-term solution is still being considered. This reversal may give some modules empty set_pcpu or set_vnet sections, but these are harmless. Changes reverted: ------------------------------------------------------------------------ r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines Instead of unconditionally emitting .globl's for the __start_set_xxx and __stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu sections are actually defined. ------------------------------------------------------------------------ r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout the tree. ------------------------------------------------------------------------ r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.
2010-11-22 19:32:54 +00:00
static VNET_DEFINE(int, ipsec_esp_keymin) = 256;
static VNET_DEFINE(int, ipsec_esp_auth) = 0;
static VNET_DEFINE(int, ipsec_ah_keymin) = 128;
MFP4: @176978-176982, 176984, 176990-176994, 177441 "Whitspace" churn after the VIMAGE/VNET whirls. Remove the need for some "init" functions within the network stack, like pim6_init(), icmp_init() or significantly shorten others like ip6_init() and nd6_init(), using static initialization again where possible and formerly missed. Move (most) variables back to the place they used to be before the container structs and VIMAGE_GLOABLS (before r185088) and try to reduce the diff to stable/7 and earlier as good as possible, to help out-of-tree consumers to update from 6.x or 7.x to 8 or 9. This also removes some header file pollution for putatively static global variables. Revert VIMAGE specific changes in ipfilter::ip_auth.c, that are no longer needed. Reviewed by: jhb Discussed with: rwatson Sponsored by: The FreeBSD Foundation Sponsored by: CK Software GmbH MFC after: 6 days
2010-04-29 11:52:42 +00:00
#define V_ipsec_esp_keymin VNET(ipsec_esp_keymin)
#define V_ipsec_esp_auth VNET(ipsec_esp_auth)
Remove unused VNET_SET() and related macros; only VNET_GET() is ever actually used. Rename VNET_GET() to VNET() to shorten variable references. Discussed with: bz, julian Reviewed by: bz Approved by: re (kensmith, kib)
2009-07-16 21:13:04 +00:00
#define V_ipsec_ah_keymin VNET(ipsec_ah_keymin)
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
#ifdef SYSCTL_DECL
SYSCTL_DECL(_net_key);
#endif
Remove SYSCTL_VNET_* macros, and simply put CTLFLAG_VNET where needed. Sponsored by: Nginx, Inc.
2014-11-07 09:39:05 +00:00
SYSCTL_INT(_net_key, KEYCTL_DEBUG_LEVEL, debug,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(key_debug_level), 0, "");
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* max count of trial for the decision of spi value */
Remove SYSCTL_VNET_* macros, and simply put CTLFLAG_VNET where needed. Sponsored by: Nginx, Inc.
2014-11-07 09:39:05 +00:00
SYSCTL_INT(_net_key, KEYCTL_SPI_TRY, spi_trycnt,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(key_spi_trycnt), 0, "");
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* minimum spi value to allocate automatically. */
Remove SYSCTL_VNET_* macros, and simply put CTLFLAG_VNET where needed. Sponsored by: Nginx, Inc.
2014-11-07 09:39:05 +00:00
SYSCTL_INT(_net_key, KEYCTL_SPI_MIN_VALUE, spi_minval,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(key_spi_minval), 0, "");
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* maximun spi value to allocate automatically. */
Remove SYSCTL_VNET_* macros, and simply put CTLFLAG_VNET where needed. Sponsored by: Nginx, Inc.
2014-11-07 09:39:05 +00:00
SYSCTL_INT(_net_key, KEYCTL_SPI_MAX_VALUE, spi_maxval,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(key_spi_maxval), 0, "");
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* interval to initialize randseed */
Remove SYSCTL_VNET_* macros, and simply put CTLFLAG_VNET where needed. Sponsored by: Nginx, Inc.
2014-11-07 09:39:05 +00:00
SYSCTL_INT(_net_key, KEYCTL_RANDOM_INT, int_random,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(key_int_random), 0, "");
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* lifetime for larval SA */
Remove SYSCTL_VNET_* macros, and simply put CTLFLAG_VNET where needed. Sponsored by: Nginx, Inc.
2014-11-07 09:39:05 +00:00
SYSCTL_INT(_net_key, KEYCTL_LARVAL_LIFETIME, larval_lifetime,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(key_larval_lifetime), 0, "");
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* counter for blocking to send SADB_ACQUIRE to IKEd */
Remove SYSCTL_VNET_* macros, and simply put CTLFLAG_VNET where needed. Sponsored by: Nginx, Inc.
2014-11-07 09:39:05 +00:00
SYSCTL_INT(_net_key, KEYCTL_BLOCKACQ_COUNT, blockacq_count,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(key_blockacq_count), 0, "");
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* lifetime for blocking to send SADB_ACQUIRE to IKEd */
Remove SYSCTL_VNET_* macros, and simply put CTLFLAG_VNET where needed. Sponsored by: Nginx, Inc.
2014-11-07 09:39:05 +00:00
SYSCTL_INT(_net_key, KEYCTL_BLOCKACQ_LIFETIME, blockacq_lifetime,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(key_blockacq_lifetime), 0, "");
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* ESP auth */
Remove SYSCTL_VNET_* macros, and simply put CTLFLAG_VNET where needed. Sponsored by: Nginx, Inc.
2014-11-07 09:39:05 +00:00
SYSCTL_INT(_net_key, KEYCTL_ESP_AUTH, esp_auth,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ipsec_esp_auth), 0, "");
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* minimum ESP key length */
Remove SYSCTL_VNET_* macros, and simply put CTLFLAG_VNET where needed. Sponsored by: Nginx, Inc.
2014-11-07 09:39:05 +00:00
SYSCTL_INT(_net_key, KEYCTL_ESP_KEYMIN, esp_keymin,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ipsec_esp_keymin), 0, "");
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* minimum AH key length */
Remove SYSCTL_VNET_* macros, and simply put CTLFLAG_VNET where needed. Sponsored by: Nginx, Inc.
2014-11-07 09:39:05 +00:00
SYSCTL_INT(_net_key, KEYCTL_AH_KEYMIN, ah_keymin,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ipsec_ah_keymin), 0, "");
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* perfered old SA rather than new SA */
Remove SYSCTL_VNET_* macros, and simply put CTLFLAG_VNET where needed. Sponsored by: Nginx, Inc.
2014-11-07 09:39:05 +00:00
SYSCTL_INT(_net_key, KEYCTL_PREFERED_OLDSA, preferred_oldsa,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(key_preferred_oldsa), 0, "");
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
#define __LIST_CHAINED(elm) \
(!((elm)->chain.le_next == NULL && (elm)->chain.le_prev == NULL))
#define LIST_INSERT_TAIL(head, elm, type, field) \
do {\
struct type *curelm = LIST_FIRST(head); \
if (curelm == NULL) {\
LIST_INSERT_HEAD(head, elm, field); \
} else { \
while (LIST_NEXT(curelm, field)) \
curelm = LIST_NEXT(curelm, field);\
LIST_INSERT_AFTER(curelm, elm, field);\
}\
} while (0)
#define KEY_CHKSASTATE(head, sav, name) \
do { \
if ((head) != (sav)) { \
ipseclog((LOG_DEBUG, "%s: state mismatched (TREE=%d SA=%d)\n", \
(name), (head), (sav))); \
continue; \
} \
} while (0)
#define KEY_CHKSPDIR(head, sp, name) \
do { \
if ((head) != (sp)) { \
ipseclog((LOG_DEBUG, "%s: direction mismatched (TREE=%d SP=%d), " \
"anyway continue.\n", \
(name), (head), (sp))); \
} \
} while (0)
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
MALLOC_DEFINE(M_IPSEC_SA, "secasvar", "ipsec security association");
MALLOC_DEFINE(M_IPSEC_SAH, "sahead", "ipsec sa head");
MALLOC_DEFINE(M_IPSEC_SP, "ipsecpolicy", "ipsec security policy");
MALLOC_DEFINE(M_IPSEC_SR, "ipsecrequest", "ipsec security request");
MALLOC_DEFINE(M_IPSEC_MISC, "ipsec-misc", "ipsec miscellaneous");
MALLOC_DEFINE(M_IPSEC_SAQ, "ipsec-saq", "ipsec sa acquire");
MALLOC_DEFINE(M_IPSEC_SAR, "ipsec-reg", "ipsec sa acquire");
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/*
* set parameters into secpolicyindex buffer.
* Must allocate secpolicyindex buffer passed to this function.
*/
#define KEY_SETSECSPIDX(_dir, s, d, ps, pd, ulp, idx) \
do { \
bzero((idx), sizeof(struct secpolicyindex)); \
(idx)->dir = (_dir); \
(idx)->prefs = (ps); \
(idx)->prefd = (pd); \
(idx)->ul_proto = (ulp); \
bcopy((s), &(idx)->src, ((const struct sockaddr *)(s))->sa_len); \
bcopy((d), &(idx)->dst, ((const struct sockaddr *)(d))->sa_len); \
} while (0)
/*
* set parameters into secasindex buffer.
* Must allocate secasindex buffer before calling this function.
*/
#define KEY_SETSECASIDX(p, m, r, s, d, idx) \
do { \
bzero((idx), sizeof(struct secasindex)); \
(idx)->proto = (p); \
(idx)->mode = (m); \
(idx)->reqid = (r); \
bcopy((s), &(idx)->src, ((const struct sockaddr *)(s))->sa_len); \
bcopy((d), &(idx)->dst, ((const struct sockaddr *)(d))->sa_len); \
} while (0)
/* key statistics */
struct _keystat {
u_long getspi_count; /* the avarage of count to try to get new SPI */
} keystat;
struct sadb_msghdr {
struct sadb_msg *msg;
struct sadb_ext *ext[SADB_EXT_MAX + 1];
int extoff[SADB_EXT_MAX + 1];
int extlen[SADB_EXT_MAX + 1];
};
Use a static callout to drive key_timehandler() instead of timeout(). While here, make key_timehandler() private to key.c. Submitted by: bz (2) Tested by: bz
2014-10-23 20:43:16 +00:00
#ifndef IPSEC_DEBUG2
static struct callout key_timer;
#endif
Remove __P() macro. Suggested by: kevlo Sponsored by: Yandex LLC
2014-12-03 04:08:41 +00:00
static struct secasvar *key_allocsa_policy(const struct secasindex *);
static void key_freesp_so(struct secpolicy **);
static struct secasvar *key_do_allocsa_policy(struct secashead *, u_int);
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
static void key_unlink(struct secpolicy *);
Remove __P() macro. Suggested by: kevlo Sponsored by: Yandex LLC
2014-12-03 04:08:41 +00:00
static struct secpolicy *key_getsp(struct secpolicyindex *);
static struct secpolicy *key_getspbyid(u_int32_t);
static u_int32_t key_newreqid(void);
static struct mbuf *key_gather_mbuf(struct mbuf *,
const struct sadb_msghdr *, int, int, ...);
static int key_spdadd(struct socket *, struct mbuf *,
const struct sadb_msghdr *);
static u_int32_t key_getnewspid(void);
static int key_spddelete(struct socket *, struct mbuf *,
const struct sadb_msghdr *);
static int key_spddelete2(struct socket *, struct mbuf *,
const struct sadb_msghdr *);
static int key_spdget(struct socket *, struct mbuf *,
const struct sadb_msghdr *);
static int key_spdflush(struct socket *, struct mbuf *,
const struct sadb_msghdr *);
static int key_spddump(struct socket *, struct mbuf *,
const struct sadb_msghdr *);
static struct mbuf *key_setdumpsp(struct secpolicy *,
u_int8_t, u_int32_t, u_int32_t);
static u_int key_getspreqmsglen(struct secpolicy *);
static int key_spdexpire(struct secpolicy *);
static struct secashead *key_newsah(struct secasindex *);
static void key_delsah(struct secashead *);
static struct secasvar *key_newsav(struct mbuf *,
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
const struct sadb_msghdr *, struct secashead *, int *,
Remove __P() macro. Suggested by: kevlo Sponsored by: Yandex LLC
2014-12-03 04:08:41 +00:00
const char*, int);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
#define KEY_NEWSAV(m, sadb, sah, e) \
key_newsav(m, sadb, sah, e, __FILE__, __LINE__)
Remove __P() macro. Suggested by: kevlo Sponsored by: Yandex LLC
2014-12-03 04:08:41 +00:00
static void key_delsav(struct secasvar *);
static struct secashead *key_getsah(struct secasindex *);
static struct secasvar *key_checkspidup(struct secasindex *, u_int32_t);
static struct secasvar *key_getsavbyspi(struct secashead *, u_int32_t);
static int key_setsaval(struct secasvar *, struct mbuf *,
const struct sadb_msghdr *);
static int key_mature(struct secasvar *);
static struct mbuf *key_setdumpsa(struct secasvar *, u_int8_t,
u_int8_t, u_int32_t, u_int32_t);
static struct mbuf *key_setsadbmsg(u_int8_t, u_int16_t, u_int8_t,
u_int32_t, pid_t, u_int16_t);
static struct mbuf *key_setsadbsa(struct secasvar *);
static struct mbuf *key_setsadbaddr(u_int16_t,
const struct sockaddr *, u_int8_t, u_int16_t);
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
#ifdef IPSEC_NAT_T
static struct mbuf *key_setsadbxport(u_int16_t, u_int16_t);
static struct mbuf *key_setsadbxtype(u_int16_t);
#endif
static void key_porttosaddr(struct sockaddr *, u_int16_t);
#define KEY_PORTTOSADDR(saddr, port) \
key_porttosaddr((struct sockaddr *)(saddr), (port))
Remove __P() macro. Suggested by: kevlo Sponsored by: Yandex LLC
2014-12-03 04:08:41 +00:00
static struct mbuf *key_setsadbxsa2(u_int8_t, u_int32_t, u_int32_t);
static struct mbuf *key_setsadbxpolicy(u_int16_t, u_int8_t,
u_int32_t);
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
static struct seckey *key_dup_keymsg(const struct sadb_key *, u_int,
struct malloc_type *);
static struct seclifetime *key_dup_lifemsg(const struct sadb_lifetime *src,
struct malloc_type *type);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
#ifdef INET6
Remove __P() macro. Suggested by: kevlo Sponsored by: Yandex LLC
2014-12-03 04:08:41 +00:00
static int key_ismyaddr6(struct sockaddr_in6 *);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
#endif
/* flags for key_cmpsaidx() */
#define CMP_HEAD 1 /* protocol, addresses. */
#define CMP_MODE_REQID 2 /* additionally HEAD, reqid, mode. */
#define CMP_REQID 3 /* additionally HEAD, reaid. */
#define CMP_EXACTLY 4 /* all elements. */
Remove __P() macro. Suggested by: kevlo Sponsored by: Yandex LLC
2014-12-03 04:08:41 +00:00
static int key_cmpsaidx(const struct secasindex *,
const struct secasindex *, int);
static int key_cmpspidx_exactly(struct secpolicyindex *,
struct secpolicyindex *);
static int key_cmpspidx_withmask(struct secpolicyindex *,
struct secpolicyindex *);
static int key_sockaddrcmp(const struct sockaddr *,
const struct sockaddr *, int);
static int key_bbcmp(const void *, const void *, u_int);
static u_int16_t key_satype2proto(u_int8_t);
static u_int8_t key_proto2satype(u_int16_t);
static int key_getspi(struct socket *, struct mbuf *,
const struct sadb_msghdr *);
static u_int32_t key_do_getnewspi(struct sadb_spirange *,
struct secasindex *);
static int key_update(struct socket *, struct mbuf *,
const struct sadb_msghdr *);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
#ifdef IPSEC_DOSEQCHECK
Remove __P() macro. Suggested by: kevlo Sponsored by: Yandex LLC
2014-12-03 04:08:41 +00:00
static struct secasvar *key_getsavbyseq(struct secashead *, u_int32_t);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
#endif
Remove __P() macro. Suggested by: kevlo Sponsored by: Yandex LLC
2014-12-03 04:08:41 +00:00
static int key_add(struct socket *, struct mbuf *,
const struct sadb_msghdr *);
static int key_setident(struct secashead *, struct mbuf *,
const struct sadb_msghdr *);
static struct mbuf *key_getmsgbuf_x1(struct mbuf *,
const struct sadb_msghdr *);
static int key_delete(struct socket *, struct mbuf *,
const struct sadb_msghdr *);
static int key_delete_all(struct socket *, struct mbuf *,
const struct sadb_msghdr *, u_int16_t);
static int key_get(struct socket *, struct mbuf *,
const struct sadb_msghdr *);
static void key_getcomb_setlifetime(struct sadb_comb *);
static struct mbuf *key_getcomb_esp(void);
static struct mbuf *key_getcomb_ah(void);
static struct mbuf *key_getcomb_ipcomp(void);
static struct mbuf *key_getprop(const struct secasindex *);
static int key_acquire(const struct secasindex *, struct secpolicy *);
static struct secacq *key_newacq(const struct secasindex *);
static struct secacq *key_getacq(const struct secasindex *);
static struct secacq *key_getacqbyseq(u_int32_t);
static struct secspacq *key_newspacq(struct secpolicyindex *);
static struct secspacq *key_getspacq(struct secpolicyindex *);
static int key_acquire2(struct socket *, struct mbuf *,
const struct sadb_msghdr *);
static int key_register(struct socket *, struct mbuf *,
const struct sadb_msghdr *);
Teach key_expire() send SADB_EXPIRE message with the SADB_EXT_LIFETIME_HARD extension header type. The key_flush_sad() now will send SADB_EXPIRE message when HARD lifetime expires. This is required by RFC 2367 and some keying daemons rely on these messages. HARD lifetime messages have precedence over SOFT lifetime messages, so now they will be checked first. Also now SADB_EXPIRE messages will be send even the SA has not been used, because keying daemons might want to rekey such SA. PR: 200282, 200283 Submitted by: Tobias Brunner <tobias at strongswan dot org> MFC after: 2 weeks
2015-05-19 08:30:04 +00:00
static int key_expire(struct secasvar *, int);
Remove __P() macro. Suggested by: kevlo Sponsored by: Yandex LLC
2014-12-03 04:08:41 +00:00
static int key_flush(struct socket *, struct mbuf *,
const struct sadb_msghdr *);
static int key_dump(struct socket *, struct mbuf *,
const struct sadb_msghdr *);
static int key_promisc(struct socket *, struct mbuf *,
const struct sadb_msghdr *);
static int key_senderror(struct socket *, struct mbuf *, int);
static int key_validate_ext(const struct sadb_ext *, int);
static int key_align(struct mbuf *, struct sadb_msghdr *);
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
static struct mbuf *key_setlifetime(struct seclifetime *src,
u_int16_t exttype);
static struct mbuf *key_setkey(struct seckey *src, u_int16_t exttype);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
#if 0
Remove __P() macro. Suggested by: kevlo Sponsored by: Yandex LLC
2014-12-03 04:08:41 +00:00
static const char *key_getfqdn(void);
static const char *key_getuserfqdn(void);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
#endif
Remove __P() macro. Suggested by: kevlo Sponsored by: Yandex LLC
2014-12-03 04:08:41 +00:00
static void key_sa_chgstate(struct secasvar *, u_int8_t);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Prevent disappearing SAD entries by implementing MPsafe refcounting. "Why didn't he use SECASVAR_LOCK()/SECASVAR_UNLOCK() macros to synchronize access to the secasvar structure's fields?" one may ask. There were two reasons: 1. refcount(9) is faster then mutex(9) synchronization (one atomic operation instead of two). 2. Those macros are not used now at all, so at some point we may decide to remove them entirely. OK'ed by: gnn MFC after: 2 weeks
2006-05-20 15:35:36 +00:00
static __inline void
sa_initref(struct secasvar *sav)
{
refcount_init(&sav->refcnt, 1);
}
static __inline void
sa_addref(struct secasvar *sav)
{
refcount_acquire(&sav->refcnt);
IPSEC_ASSERT(sav->refcnt != 0, ("SA refcnt overflow"));
}
static __inline int
sa_delref(struct secasvar *sav)
{
IPSEC_ASSERT(sav->refcnt > 0, ("SA refcnt underflow"));
return (refcount_release(&sav->refcnt));
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
#define SP_ADDREF(p) refcount_acquire(&(p)->refcnt)
#define SP_DELREF(p) refcount_release(&(p)->refcnt)
Add missing locking for secpolicy refcnt manipulations. Submitted by: Roselyn Lee
2004-09-30 01:08:02 +00:00
/*
* Update the refcnt while holding the SPTREE lock.
*/
void
key_addref(struct secpolicy *sp)
{
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
Add missing locking for secpolicy refcnt manipulations. Submitted by: Roselyn Lee
2004-09-30 01:08:02 +00:00
SP_ADDREF(sp);
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/*
* Return 0 when there are known to be no SP's for the specified
* direction. Otherwise return 1. This is used by IPsec code
* to optimize performance.
*/
int
key_havesp(u_int dir)
{
Step 1.5 of importing the network stack virtualization infrastructure from the vimage project, as per plan established at devsummit 08/08: http://wiki.freebsd.org/Image/Notes200808DevSummit Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator macros, and CURVNET_SET() context setting macros, all currently resolving to NOPs. Prepare for virtualization of selected SYSCTL objects by introducing a family of SYSCTL_V_*() macros, currently resolving to their global counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT(). Move selected #defines from sys/sys/vimage.h to newly introduced header files specific to virtualized subsystems (sys/net/vnet.h, sys/netinet/vinet.h etc.). All the changes are verified to have zero functional impact at this point in time by doing MD5 comparision between pre- and post-change object files(*). (*) netipsec/keysock.c did not validate depending on compile time options. Implemented by: julian, bz, brooks, zec Reviewed by: julian, bz, brooks, kris, rwatson, ... Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return (dir == IPSEC_DIR_INBOUND || dir == IPSEC_DIR_OUTBOUND ?
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
TAILQ_FIRST(&V_sptree[dir]) != NULL : 1);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
/* %%% IPsec policy management */
/*
* allocating a SP for OUTBOUND or INBOUND packet.
* Must call key_freesp() later.
* OUT: NULL: not found
* others: found and return the pointer.
*/
struct secpolicy *
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_allocsp(struct secpolicyindex *spidx, u_int dir, const char* where,
int tag)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
SPTREE_RLOCK_TRACKER;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
struct secpolicy *sp;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(spidx != NULL, ("null spidx"));
IPSEC_ASSERT(dir == IPSEC_DIR_INBOUND || dir == IPSEC_DIR_OUTBOUND,
("invalid direction %u", dir));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
KEYDEBUG(KEYDEBUG_IPSEC_STAMP,
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
printf("DP %s from %s:%u\n", __func__, where, tag));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* get a SP entry */
KEYDEBUG(KEYDEBUG_IPSEC_DATA,
printf("*** objects\n");
kdebug_secpolicyindex(spidx));
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
SPTREE_RLOCK();
TAILQ_FOREACH(sp, &V_sptree[dir], chain) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
KEYDEBUG(KEYDEBUG_IPSEC_DATA,
printf("*** in SPD\n");
kdebug_secpolicyindex(&sp->spidx));
if (key_cmpspidx_withmask(&sp->spidx, spidx))
goto found;
}
sp = NULL;
found:
if (sp) {
/* sanity check */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
KEY_CHKSPDIR(sp->spidx.dir, dir, __func__);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* found a SPD entry */
sp->lastused = time_second;
SP_ADDREF(sp);
}
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
SPTREE_RUNLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
KEYDEBUG(KEYDEBUG_IPSEC_STAMP,
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
printf("DP %s return SP:%p (ID=%u) refcnt %u\n", __func__,
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
sp, sp ? sp->id : 0, sp ? sp->refcnt : 0));
return sp;
}
/*
* allocating a SP for OUTBOUND or INBOUND packet.
* Must call key_freesp() later.
* OUT: NULL: not found
* others: found and return the pointer.
*/
struct secpolicy *
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_allocsp2(u_int32_t spi, union sockaddr_union *dst, u_int8_t proto,
u_int dir, const char* where, int tag)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
SPTREE_RLOCK_TRACKER;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
struct secpolicy *sp;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(dst != NULL, ("null dst"));
IPSEC_ASSERT(dir == IPSEC_DIR_INBOUND || dir == IPSEC_DIR_OUTBOUND,
("invalid direction %u", dir));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
KEYDEBUG(KEYDEBUG_IPSEC_STAMP,
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
printf("DP %s from %s:%u\n", __func__, where, tag));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* get a SP entry */
KEYDEBUG(KEYDEBUG_IPSEC_DATA,
printf("*** objects\n");
printf("spi %u proto %u dir %u\n", spi, proto, dir);
kdebug_sockaddr(&dst->sa));
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
SPTREE_RLOCK();
TAILQ_FOREACH(sp, &V_sptree[dir], chain) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
KEYDEBUG(KEYDEBUG_IPSEC_DATA,
printf("*** in SPD\n");
kdebug_secpolicyindex(&sp->spidx));
/* compare simple values, then dst address */
if (sp->spidx.ul_proto != proto)
continue;
/* NB: spi's must exist and match */
if (!sp->req || !sp->req->sav || sp->req->sav->spi != spi)
continue;
if (key_sockaddrcmp(&sp->spidx.dst.sa, &dst->sa, 1) == 0)
goto found;
}
sp = NULL;
found:
if (sp) {
/* sanity check */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
KEY_CHKSPDIR(sp->spidx.dir, dir, __func__);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* found a SPD entry */
sp->lastused = time_second;
SP_ADDREF(sp);
}
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
SPTREE_RUNLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
KEYDEBUG(KEYDEBUG_IPSEC_STAMP,
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
printf("DP %s return SP:%p (ID=%u) refcnt %u\n", __func__,
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
sp, sp ? sp->id : 0, sp ? sp->refcnt : 0));
return sp;
}
key_gettunnel() has been unsued with FAST_IPSEC (now IPSEC). KAME had explicit checks at one point using it, so just hide it behind #if 0 for now until we are sure if we can completely dump it or not. MFC after: 1 month
2009-04-27 21:04:16 +00:00
#if 0
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/*
* return a policy that matches this particular inbound packet.
* XXX slow
*/
struct secpolicy *
key_gettunnel(const struct sockaddr *osrc,
const struct sockaddr *odst,
const struct sockaddr *isrc,
const struct sockaddr *idst,
const char* where, int tag)
{
struct secpolicy *sp;
const int dir = IPSEC_DIR_INBOUND;
struct ipsecrequest *r1, *r2, *p;
struct secpolicyindex spidx;
KEYDEBUG(KEYDEBUG_IPSEC_STAMP,
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
printf("DP %s from %s:%u\n", __func__, where, tag));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (isrc->sa_family != idst->sa_family) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_ERR, "%s: protocol family mismatched %d != %d\n.",
__func__, isrc->sa_family, idst->sa_family));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
sp = NULL;
goto done;
}
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SPTREE_LOCK();
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
LIST_FOREACH(sp, &V_sptree[dir], chain) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (sp->state == IPSEC_SPSTATE_DEAD)
continue;
r1 = r2 = NULL;
for (p = sp->req; p; p = p->next) {
if (p->saidx.mode != IPSEC_MODE_TUNNEL)
continue;
r1 = r2;
r2 = p;
if (!r1) {
/* here we look at address matches only */
spidx = sp->spidx;
if (isrc->sa_len > sizeof(spidx.src) ||
idst->sa_len > sizeof(spidx.dst))
continue;
bcopy(isrc, &spidx.src, isrc->sa_len);
bcopy(idst, &spidx.dst, idst->sa_len);
if (!key_cmpspidx_withmask(&sp->spidx, &spidx))
continue;
} else {
if (key_sockaddrcmp(&r1->saidx.src.sa, isrc, 0) ||
key_sockaddrcmp(&r1->saidx.dst.sa, idst, 0))
continue;
}
if (key_sockaddrcmp(&r2->saidx.src.sa, osrc, 0) ||
key_sockaddrcmp(&r2->saidx.dst.sa, odst, 0))
continue;
goto found;
}
}
sp = NULL;
found:
if (sp) {
sp->lastused = time_second;
SP_ADDREF(sp);
}
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SPTREE_UNLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
done:
KEYDEBUG(KEYDEBUG_IPSEC_STAMP,
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
printf("DP %s return SP:%p (ID=%u) refcnt %u\n", __func__,
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
sp, sp ? sp->id : 0, sp ? sp->refcnt : 0));
return sp;
}
key_gettunnel() has been unsued with FAST_IPSEC (now IPSEC). KAME had explicit checks at one point using it, so just hide it behind #if 0 for now until we are sure if we can completely dump it or not. MFC after: 1 month
2009-04-27 21:04:16 +00:00
#endif
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/*
* allocating an SA entry for an *OUTBOUND* packet.
* checking each request entries in SP, and acquire an SA if need.
* OUT: 0: there are valid requests.
* ENOENT: policy may be valid, but SA with REQUIRE is on acquiring.
*/
int
key_checkrequest(struct ipsecrequest *isr, const struct secasindex *saidx)
{
u_int level;
int error;
Optimisation in IPSEC(4): - Remove contention on ISR during the crypto operation by using rwlock(9). - Remove a second lookup of the SA in the callback. Gain on 6 cores CPU with SHA1/AES128 can be up to 30%. Reviewed by: vanhu MFC after: 1 month
2011-03-31 15:23:32 +00:00
struct secasvar *sav;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(isr != NULL, ("null isr"));
IPSEC_ASSERT(saidx != NULL, ("null saidx"));
IPSEC_ASSERT(saidx->mode == IPSEC_MODE_TRANSPORT ||
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
saidx->mode == IPSEC_MODE_TUNNEL,
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
("unexpected policy %u", saidx->mode));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/*
* XXX guard against protocol callbacks from the crypto
* thread as they reference ipsecrequest.sav which we
* temporarily null out below. Need to rethink how we
* handle bundled SA's in the callback thread.
*/
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSECREQUEST_LOCK_ASSERT(isr);
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
/* get current level */
level = ipsec_get_reqlevel(isr);
Optimisation in IPSEC(4): - Remove contention on ISR during the crypto operation by using rwlock(9). - Remove a second lookup of the SA in the callback. Gain on 6 cores CPU with SHA1/AES128 can be up to 30%. Reviewed by: vanhu MFC after: 1 month
2011-03-31 15:23:32 +00:00
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/*
Optimisation in IPSEC(4): - Remove contention on ISR during the crypto operation by using rwlock(9). - Remove a second lookup of the SA in the callback. Gain on 6 cores CPU with SHA1/AES128 can be up to 30%. Reviewed by: vanhu MFC after: 1 month
2011-03-31 15:23:32 +00:00
* We check new SA in the IPsec request because a different
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
* SA may be involved each time this request is checked, either
* because new SAs are being configured, or this request is
* associated with an unconnected datagram socket, or this request
* is associated with a system default policy.
*
* key_allocsa_policy should allocate the oldest SA available.
* See key_do_allocsa_policy(), and draft-jenkins-ipsec-rekeying-03.txt.
*/
Optimisation in IPSEC(4): - Remove contention on ISR during the crypto operation by using rwlock(9). - Remove a second lookup of the SA in the callback. Gain on 6 cores CPU with SHA1/AES128 can be up to 30%. Reviewed by: vanhu MFC after: 1 month
2011-03-31 15:23:32 +00:00
sav = key_allocsa_policy(saidx);
if (sav != isr->sav) {
/* SA need to be updated. */
if (!IPSECREQUEST_UPGRADE(isr)) {
/* Kick everyone off. */
IPSECREQUEST_UNLOCK(isr);
IPSECREQUEST_WLOCK(isr);
}
if (isr->sav != NULL)
KEY_FREESAV(&isr->sav);
isr->sav = sav;
IPSECREQUEST_DOWNGRADE(isr);
} else if (sav != NULL)
KEY_FREESAV(&sav);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* When there is SA. */
if (isr->sav != NULL) {
if (isr->sav->state != SADB_SASTATE_MATURE &&
isr->sav->state != SADB_SASTATE_DYING)
return EINVAL;
return 0;
}
/* there is no SA */
error = key_acquire(saidx, isr->sp);
if (error != 0) {
/* XXX What should I do ? */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: error %d returned from key_acquire\n",
__func__, error));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return error;
}
if (level != IPSEC_LEVEL_REQUIRE) {
/* XXX sigh, the interface to this routine is botched */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(isr->sav == NULL, ("unexpected SA"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return 0;
} else {
return ENOENT;
}
}
/*
* allocating a SA for policy entry from SAD.
* NOTE: searching SAD of aliving state.
* OUT: NULL: not found.
* others: found and return the pointer.
*/
static struct secasvar *
key_allocsa_policy(const struct secasindex *saidx)
{
add support to prefer old SA to new SA during allocation (makes net.key.preferred_oldsa work as for KAME) Submitted by: gabor@sentex.net Reviewed by: Bjoern A. Zeeb MFC after: 1 day
2004-05-03 03:29:21 +00:00
#define N(a) _ARRAYLEN(a)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
struct secashead *sah;
struct secasvar *sav;
add support to prefer old SA to new SA during allocation (makes net.key.preferred_oldsa work as for KAME) Submitted by: gabor@sentex.net Reviewed by: Bjoern A. Zeeb MFC after: 1 day
2004-05-03 03:29:21 +00:00
u_int stateidx, arraysize;
const u_int *state_valid;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Silent gcc? Yeah, you wish. What I ment was to silence gcc. Spotted by: julian
2009-09-06 19:05:03 +00:00
state_valid = NULL; /* silence gcc */
arraysize = 0; /* silence gcc */
Initialize state_valid and arraysize variable so gcc won't complain. Reported by: bz
2009-09-06 18:09:25 +00:00
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_LOCK();
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
LIST_FOREACH(sah, &V_sahtree, chain) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (sah->state == SADB_SASTATE_DEAD)
continue;
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
if (key_cmpsaidx(&sah->saidx, saidx, CMP_MODE_REQID)) {
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
if (V_key_preferred_oldsa) {
add support to prefer old SA to new SA during allocation (makes net.key.preferred_oldsa work as for KAME) Submitted by: gabor@sentex.net Reviewed by: Bjoern A. Zeeb MFC after: 1 day
2004-05-03 03:29:21 +00:00
state_valid = saorder_state_valid_prefer_old;
arraysize = N(saorder_state_valid_prefer_old);
} else {
state_valid = saorder_state_valid_prefer_new;
arraysize = N(saorder_state_valid_prefer_new);
}
Improve code a bit by eliminating goto and having one unlock per lock.
2009-09-06 07:32:16 +00:00
break;
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_UNLOCK();
Improve code a bit by eliminating goto and having one unlock per lock.
2009-09-06 07:32:16 +00:00
if (sah == NULL)
return NULL;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* search valid state */
add support to prefer old SA to new SA during allocation (makes net.key.preferred_oldsa work as for KAME) Submitted by: gabor@sentex.net Reviewed by: Bjoern A. Zeeb MFC after: 1 day
2004-05-03 03:29:21 +00:00
for (stateidx = 0; stateidx < arraysize; stateidx++) {
sav = key_do_allocsa_policy(sah, state_valid[stateidx]);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (sav != NULL)
return sav;
}
return NULL;
add support to prefer old SA to new SA during allocation (makes net.key.preferred_oldsa work as for KAME) Submitted by: gabor@sentex.net Reviewed by: Bjoern A. Zeeb MFC after: 1 day
2004-05-03 03:29:21 +00:00
#undef N
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
/*
* searching SAD with direction, protocol, mode and state.
* called by key_allocsa_policy().
* OUT:
* NULL : not found
* others : found, pointer to a SA.
*/
static struct secasvar *
key_do_allocsa_policy(struct secashead *sah, u_int state)
{
struct secasvar *sav, *nextsav, *candidate, *d;
/* initilize */
candidate = NULL;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_LOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
for (sav = LIST_FIRST(&sah->savtree[state]);
sav != NULL;
sav = nextsav) {
nextsav = LIST_NEXT(sav, chain);
/* sanity check */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
KEY_CHKSASTATE(sav->state, state, __func__);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* initialize */
if (candidate == NULL) {
candidate = sav;
continue;
}
/* Which SA is the better ? */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(candidate->lft_c != NULL,
("null candidate lifetime"));
IPSEC_ASSERT(sav->lft_c != NULL, ("null sav lifetime"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* What the best method is to compare ? */
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
if (V_key_preferred_oldsa) {
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
if (candidate->lft_c->addtime >
sav->lft_c->addtime) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
candidate = sav;
}
continue;
/*NOTREACHED*/
}
Fix type in a sysctl. It used to be: net.key.prefered_oldsa and is corrected to net.key.preferred_oldsa This makes it consistent with the KAME IPsec implementation. Approved by: sam
2004-02-16 17:09:53 +00:00
/* preferred new sa rather than old sa */
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
if (candidate->lft_c->addtime <
sav->lft_c->addtime) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
d = candidate;
candidate = sav;
} else
d = sav;
/*
* prepared to delete the SA when there is more
* suitable candidate and the lifetime of the SA is not
* permanent.
*/
Import change from KAME, rev. 1.362 kame/kame/sys/netkey/key.c In case of "new SA", we must check the hard lifetime of the old SA to find out if it is not permanent and we can delete it. Submitted by: sakane via gnn MFC after: 3 days
2008-03-24 14:55:09 +00:00
if (d->lft_h->addtime != 0) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
struct mbuf *m, *result;
must convert protocol to sa type when preparing a DELETE message Submitted by: Roselyn Lee <rosel@verniernetworks.com> MFC after: 1 week
2004-02-05 23:19:17 +00:00
u_int8_t satype;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
key_sa_chgstate(d, SADB_SASTATE_DEAD);
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(d->refcnt > 0, ("bogus ref count"));
must convert protocol to sa type when preparing a DELETE message Submitted by: Roselyn Lee <rosel@verniernetworks.com> MFC after: 1 week
2004-02-05 23:19:17 +00:00
satype = key_proto2satype(d->sah->saidx.proto);
if (satype == 0)
goto msgfail;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
m = key_setsadbmsg(SADB_DELETE, 0,
must convert protocol to sa type when preparing a DELETE message Submitted by: Roselyn Lee <rosel@verniernetworks.com> MFC after: 1 week
2004-02-05 23:19:17 +00:00
satype, 0, 0, d->refcnt - 1);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (!m)
goto msgfail;
result = m;
/* set sadb_address for saidx's. */
m = key_setsadbaddr(SADB_EXT_ADDRESS_SRC,
&d->sah->saidx.src.sa,
d->sah->saidx.src.sa.sa_len << 3,
IPSEC_ULPROTO_ANY);
if (!m)
goto msgfail;
m_cat(result, m);
/* set sadb_address for saidx's. */
m = key_setsadbaddr(SADB_EXT_ADDRESS_DST,
use correct address for SADB_EXT_ADDRESS_DST in key_do_allocsa_policy (was using src instead of dst) Submitted by: Bjoern A. Zeeb Obtained from: KAME MFC after: 1 day
2004-05-03 05:15:53 +00:00
&d->sah->saidx.dst.sa,
d->sah->saidx.dst.sa.sa_len << 3,
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
IPSEC_ULPROTO_ANY);
if (!m)
goto msgfail;
m_cat(result, m);
/* create SA extension */
m = key_setsadbsa(d);
if (!m)
goto msgfail;
m_cat(result, m);
if (result->m_len < sizeof(struct sadb_msg)) {
result = m_pullup(result,
sizeof(struct sadb_msg));
if (result == NULL)
goto msgfail;
}
result->m_pkthdr.len = 0;
for (m = result; m; m = m->m_next)
result->m_pkthdr.len += m->m_len;
mtod(result, struct sadb_msg *)->sadb_msg_len =
PFKEY_UNIT64(result->m_pkthdr.len);
if (key_sendup_mbuf(NULL, result,
KEY_SENDUP_REGISTERED))
goto msgfail;
msgfail:
KEY_FREESAV(&d);
}
}
if (candidate) {
Prevent disappearing SAD entries by implementing MPsafe refcounting. "Why didn't he use SECASVAR_LOCK()/SECASVAR_UNLOCK() macros to synchronize access to the secasvar structure's fields?" one may ask. There were two reasons: 1. refcount(9) is faster then mutex(9) synchronization (one atomic operation instead of two). 2. Those macros are not used now at all, so at some point we may decide to remove them entirely. OK'ed by: gnn MFC after: 2 weeks
2006-05-20 15:35:36 +00:00
sa_addref(candidate);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
KEYDEBUG(KEYDEBUG_IPSEC_STAMP,
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
printf("DP %s cause refcnt++:%d SA:%p\n",
__func__, candidate->refcnt, candidate));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_UNLOCK();
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return candidate;
}
/*
* allocating a usable SA entry for a *INBOUND* packet.
* Must call key_freesav() later.
* OUT: positive: pointer to a usable sav (i.e. MATURE or DYING state).
* NULL: not found, or error occured.
*
* In the comparison, no source address is used--for RFC2401 conformance.
* To quote, from section 4.1:
* A security association is uniquely identified by a triple consisting
* of a Security Parameter Index (SPI), an IP Destination Address, and a
* security protocol (AH or ESP) identifier.
* Note that, however, we do need to keep source address in IPsec SA.
* IKE specification and PF_KEY specification do assume that we
* keep source address in IPsec SA. We see a tricky situation here.
*/
struct secasvar *
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_allocsa(union sockaddr_union *dst, u_int proto, u_int32_t spi,
const char* where, int tag)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct secashead *sah;
struct secasvar *sav;
add support to prefer old SA to new SA during allocation (makes net.key.preferred_oldsa work as for KAME) Submitted by: gabor@sentex.net Reviewed by: Bjoern A. Zeeb MFC after: 1 day
2004-05-03 03:29:21 +00:00
u_int stateidx, arraysize, state;
const u_int *saorder_state_valid;
Only do a ports check if this is a NAT-T SA. Otherwise other lookups providing ports may get unexpected results. MFC After: 2 weeks
2014-05-24 09:29:23 +00:00
#ifdef IPSEC_NAT_T
int natt_chkport;
#endif
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(dst != NULL, ("null dst address"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
KEYDEBUG(KEYDEBUG_IPSEC_STAMP,
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
printf("DP %s from %s:%u\n", __func__, where, tag));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
#ifdef IPSEC_NAT_T
Only do a ports check if this is a NAT-T SA. Otherwise other lookups providing ports may get unexpected results. MFC After: 2 weeks
2014-05-24 09:29:23 +00:00
natt_chkport = (dst->sa.sa_family == AF_INET &&
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
dst->sa.sa_len == sizeof(struct sockaddr_in) &&
dst->sin.sin_port != 0);
#endif
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/*
* searching SAD.
* XXX: to be checked internal IP header somewhere. Also when
* IPsec tunnel packet is received. But ESP tunnel mode is
* encrypted so we can't check internal IP header.
*/
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_LOCK();
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
if (V_key_preferred_oldsa) {
add support to prefer old SA to new SA during allocation (makes net.key.preferred_oldsa work as for KAME) Submitted by: gabor@sentex.net Reviewed by: Bjoern A. Zeeb MFC after: 1 day
2004-05-03 03:29:21 +00:00
saorder_state_valid = saorder_state_valid_prefer_old;
arraysize = _ARRAYLEN(saorder_state_valid_prefer_old);
} else {
saorder_state_valid = saorder_state_valid_prefer_new;
arraysize = _ARRAYLEN(saorder_state_valid_prefer_new);
}
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
LIST_FOREACH(sah, &V_sahtree, chain) {
Only do a ports check if this is a NAT-T SA. Otherwise other lookups providing ports may get unexpected results. MFC After: 2 weeks
2014-05-24 09:29:23 +00:00
int checkport;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* search valid state */
add support to prefer old SA to new SA during allocation (makes net.key.preferred_oldsa work as for KAME) Submitted by: gabor@sentex.net Reviewed by: Bjoern A. Zeeb MFC after: 1 day
2004-05-03 03:29:21 +00:00
for (stateidx = 0; stateidx < arraysize; stateidx++) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
state = saorder_state_valid[stateidx];
LIST_FOREACH(sav, &sah->savtree[state], chain) {
/* sanity check */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
KEY_CHKSASTATE(sav->state, state, __func__);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* do not return entries w/ unusable state */
if (sav->state != SADB_SASTATE_MATURE &&
sav->state != SADB_SASTATE_DYING)
continue;
if (proto != sav->sah->saidx.proto)
continue;
if (spi != sav->spi)
continue;
Only do a ports check if this is a NAT-T SA. Otherwise other lookups providing ports may get unexpected results. MFC After: 2 weeks
2014-05-24 09:29:23 +00:00
checkport = 0;
#ifdef IPSEC_NAT_T
/*
* Really only check ports when this is a NAT-T
* SA. Otherwise other lookups providing ports
* might suffer.
*/
if (sav->natt_type && natt_chkport)
checkport = 1;
#endif
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
#if 0 /* don't check src */
/* check src address */
Only do a ports check if this is a NAT-T SA. Otherwise other lookups providing ports may get unexpected results. MFC After: 2 weeks
2014-05-24 09:29:23 +00:00
if (key_sockaddrcmp(&src->sa,
&sav->sah->saidx.src.sa, checkport) != 0)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
continue;
#endif
/* check dst address */
Only do a ports check if this is a NAT-T SA. Otherwise other lookups providing ports may get unexpected results. MFC After: 2 weeks
2014-05-24 09:29:23 +00:00
if (key_sockaddrcmp(&dst->sa,
&sav->sah->saidx.dst.sa, checkport) != 0)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
continue;
Prevent disappearing SAD entries by implementing MPsafe refcounting. "Why didn't he use SECASVAR_LOCK()/SECASVAR_UNLOCK() macros to synchronize access to the secasvar structure's fields?" one may ask. There were two reasons: 1. refcount(9) is faster then mutex(9) synchronization (one atomic operation instead of two). 2. Those macros are not used now at all, so at some point we may decide to remove them entirely. OK'ed by: gnn MFC after: 2 weeks
2006-05-20 15:35:36 +00:00
sa_addref(sav);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
goto done;
}
}
}
sav = NULL;
done:
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_UNLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
KEYDEBUG(KEYDEBUG_IPSEC_STAMP,
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
printf("DP %s return SA:%p; refcnt %u\n", __func__,
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
sav, sav ? sav->refcnt : 0));
return sav;
}
/*
* Must be called after calling key_allocsp().
* For both the packet without socket and key_freeso().
*/
void
_key_freesp(struct secpolicy **spp, const char* where, int tag)
{
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
struct ipsecrequest *isr, *nextisr;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
struct secpolicy *sp = *spp;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(sp != NULL, ("null sp"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
KEYDEBUG(KEYDEBUG_IPSEC_STAMP,
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
printf("DP %s SP:%p (ID=%u) from %s:%u; refcnt now %u\n",
__func__, sp, sp->id, where, tag, sp->refcnt));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
if (SP_DELREF(sp) == 0)
return;
*spp = NULL;
for (isr = sp->req; isr != NULL; isr = nextisr) {
if (isr->sav != NULL) {
KEY_FREESAV(&isr->sav);
isr->sav = NULL;
}
nextisr = isr->next;
ipsec_delisr(isr);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
free(sp, M_IPSEC_SP);
}
static void
key_unlink(struct secpolicy *sp)
{
IPSEC_ASSERT(sp != NULL, ("null sp"));
IPSEC_ASSERT(sp->spidx.dir == IPSEC_DIR_INBOUND ||
sp->spidx.dir == IPSEC_DIR_OUTBOUND,
("invalid direction %u", sp->spidx.dir));
SPTREE_UNLOCK_ASSERT();
SPTREE_WLOCK();
Fix possible memory leak and several races in the IPsec policy management code. Resurrect the state field in the struct secpolicy, it has IPSEC_SPSTATE_ALIVE value when security policy linked in the chain, and IPSEC_SPSTATE_DEAD value in all other cases. This field protects from trying to unlink one security policy several times from the different threads. Take additional reference in the key_flush_spd() to be sure that policy won't be freed from the different thread while we are sending SPDEXPIRE message. Add KEY_FREESP() call to the key_unlink() to release additional reference that we take when use key_getsp*() functions. Differential Revision: https://reviews.freebsd.org/D1914 Tested by: Emeric POUPON <emeric.poupon at stormshield dot eu> Reviewed by: hrs Sponsored by: Yandex LLC
2015-02-24 10:35:07 +00:00
if (sp->state == IPSEC_SPSTATE_DEAD) {
SPTREE_WUNLOCK();
return;
}
sp->state = IPSEC_SPSTATE_DEAD;
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
TAILQ_REMOVE(&V_sptree[sp->spidx.dir], sp, chain);
SPTREE_WUNLOCK();
Fix possible memory leak and several races in the IPsec policy management code. Resurrect the state field in the struct secpolicy, it has IPSEC_SPSTATE_ALIVE value when security policy linked in the chain, and IPSEC_SPSTATE_DEAD value in all other cases. This field protects from trying to unlink one security policy several times from the different threads. Take additional reference in the key_flush_spd() to be sure that policy won't be freed from the different thread while we are sending SPDEXPIRE message. Add KEY_FREESP() call to the key_unlink() to release additional reference that we take when use key_getsp*() functions. Differential Revision: https://reviews.freebsd.org/D1914 Tested by: Emeric POUPON <emeric.poupon at stormshield dot eu> Reviewed by: hrs Sponsored by: Yandex LLC
2015-02-24 10:35:07 +00:00
KEY_FREESP(&sp);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
/*
* Must be called after calling key_allocsp().
* For the packet with socket.
*/
void
key_freeso(struct socket *so)
{
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(so != NULL, ("null so"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
switch (so->so_proto->pr_domain->dom_family) {
Another step assimilating IPv[46] PCB code - directly use the inpcb names rather than the following IPv6 compat macros: in6pcb,in6p_sp, in6p_ip6_nxt,in6p_flowinfo,in6p_vflag, in6p_flags,in6p_socket,in6p_lport,in6p_fport,in6p_ppcb and sotoin6pcb(). Apart from removing duplicate code in netipsec, this is a pure whitespace, not a functional change. Discussed with: rwatson Reviewed by: rwatson (version before review requested changes) MFC after: 4 weeks (set the timer and see then)
2008-12-15 21:50:54 +00:00
#if defined(INET) || defined(INET6)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
#ifdef INET
case PF_INET:
#endif
#ifdef INET6
case PF_INET6:
Another step assimilating IPv[46] PCB code - directly use the inpcb names rather than the following IPv6 compat macros: in6pcb,in6p_sp, in6p_ip6_nxt,in6p_flowinfo,in6p_vflag, in6p_flags,in6p_socket,in6p_lport,in6p_fport,in6p_ppcb and sotoin6pcb(). Apart from removing duplicate code in netipsec, this is a pure whitespace, not a functional change. Discussed with: rwatson Reviewed by: rwatson (version before review requested changes) MFC after: 4 weeks (set the timer and see then)
2008-12-15 21:50:54 +00:00
#endif
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
Another step assimilating IPv[46] PCB code - directly use the inpcb names rather than the following IPv6 compat macros: in6pcb,in6p_sp, in6p_ip6_nxt,in6p_flowinfo,in6p_vflag, in6p_flags,in6p_socket,in6p_lport,in6p_fport,in6p_ppcb and sotoin6pcb(). Apart from removing duplicate code in netipsec, this is a pure whitespace, not a functional change. Discussed with: rwatson Reviewed by: rwatson (version before review requested changes) MFC after: 4 weeks (set the timer and see then)
2008-12-15 21:50:54 +00:00
struct inpcb *pcb = sotoinpcb(so);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* Does it have a PCB ? */
if (pcb == NULL)
return;
key_freesp_so(&pcb->inp_sp->sp_in);
key_freesp_so(&pcb->inp_sp->sp_out);
}
break;
Another step assimilating IPv[46] PCB code - directly use the inpcb names rather than the following IPv6 compat macros: in6pcb,in6p_sp, in6p_ip6_nxt,in6p_flowinfo,in6p_vflag, in6p_flags,in6p_socket,in6p_lport,in6p_fport,in6p_ppcb and sotoin6pcb(). Apart from removing duplicate code in netipsec, this is a pure whitespace, not a functional change. Discussed with: rwatson Reviewed by: rwatson (version before review requested changes) MFC after: 4 weeks (set the timer and see then)
2008-12-15 21:50:54 +00:00
#endif /* INET || INET6 */
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
default:
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: unknown address family=%d.\n",
__func__, so->so_proto->pr_domain->dom_family));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return;
}
}
static void
key_freesp_so(struct secpolicy **sp)
{
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(sp != NULL && *sp != NULL, ("null sp"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if ((*sp)->policy == IPSEC_POLICY_ENTRUST ||
(*sp)->policy == IPSEC_POLICY_BYPASS)
return;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT((*sp)->policy == IPSEC_POLICY_IPSEC,
("invalid policy %u", (*sp)->policy));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
KEY_FREESP(sp);
}
Optimisation in IPSEC(4): - Remove contention on ISR during the crypto operation by using rwlock(9). - Remove a second lookup of the SA in the callback. Gain on 6 cores CPU with SHA1/AES128 can be up to 30%. Reviewed by: vanhu MFC after: 1 month
2011-03-31 15:23:32 +00:00
void
key_addrefsa(struct secasvar *sav, const char* where, int tag)
{
IPSEC_ASSERT(sav != NULL, ("null sav"));
IPSEC_ASSERT(sav->refcnt > 0, ("refcount must exist"));
sa_addref(sav);
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/*
* Must be called after calling key_allocsa().
* This function is called by key_freesp() to free some SA allocated
* for a policy.
*/
void
key_freesav(struct secasvar **psav, const char* where, int tag)
{
struct secasvar *sav = *psav;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(sav != NULL, ("null sav"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Prevent disappearing SAD entries by implementing MPsafe refcounting. "Why didn't he use SECASVAR_LOCK()/SECASVAR_UNLOCK() macros to synchronize access to the secasvar structure's fields?" one may ask. There were two reasons: 1. refcount(9) is faster then mutex(9) synchronization (one atomic operation instead of two). 2. Those macros are not used now at all, so at some point we may decide to remove them entirely. OK'ed by: gnn MFC after: 2 weeks
2006-05-20 15:35:36 +00:00
if (sa_delref(sav)) {
KEYDEBUG(KEYDEBUG_IPSEC_STAMP,
printf("DP %s SA:%p (SPI %u) from %s:%u; refcnt now %u\n",
__func__, sav, ntohl(sav->spi), where, tag, sav->refcnt));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
*psav = NULL;
key_delsav(sav);
Prevent disappearing SAD entries by implementing MPsafe refcounting. "Why didn't he use SECASVAR_LOCK()/SECASVAR_UNLOCK() macros to synchronize access to the secasvar structure's fields?" one may ask. There were two reasons: 1. refcount(9) is faster then mutex(9) synchronization (one atomic operation instead of two). 2. Those macros are not used now at all, so at some point we may decide to remove them entirely. OK'ed by: gnn MFC after: 2 weeks
2006-05-20 15:35:36 +00:00
} else {
KEYDEBUG(KEYDEBUG_IPSEC_STAMP,
printf("DP %s SA:%p (SPI %u) from %s:%u; refcnt now %u\n",
__func__, sav, ntohl(sav->spi), where, tag, sav->refcnt));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
}
/* %%% SPD management */
/*
* search SPD
* OUT: NULL : not found
* others : found, pointer to a SP.
*/
static struct secpolicy *
key_getsp(struct secpolicyindex *spidx)
{
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
SPTREE_RLOCK_TRACKER;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
struct secpolicy *sp;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(spidx != NULL, ("null spidx"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
SPTREE_RLOCK();
TAILQ_FOREACH(sp, &V_sptree[spidx->dir], chain) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (key_cmpspidx_exactly(spidx, &sp->spidx)) {
SP_ADDREF(sp);
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
break;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
}
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
SPTREE_RUNLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
return sp;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
/*
* get SP by index.
* OUT: NULL : not found
* others : found, pointer to a SP.
*/
static struct secpolicy *
key_getspbyid(u_int32_t id)
{
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
SPTREE_RLOCK_TRACKER;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
struct secpolicy *sp;
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
SPTREE_RLOCK();
TAILQ_FOREACH(sp, &V_sptree[IPSEC_DIR_INBOUND], chain) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (sp->id == id) {
SP_ADDREF(sp);
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
goto done;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
}
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
TAILQ_FOREACH(sp, &V_sptree[IPSEC_DIR_OUTBOUND], chain) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (sp->id == id) {
SP_ADDREF(sp);
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
goto done;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
}
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
done:
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
SPTREE_RUNLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
return sp;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
struct secpolicy *
key_newsp(const char* where, int tag)
{
struct secpolicy *newsp = NULL;
newsp = (struct secpolicy *)
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
malloc(sizeof(struct secpolicy), M_IPSEC_SP, M_NOWAIT|M_ZERO);
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
if (newsp)
refcount_init(&newsp->refcnt, 1);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
KEYDEBUG(KEYDEBUG_IPSEC_STAMP,
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
printf("DP %s from %s:%u return SP:%p\n", __func__,
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
where, tag, newsp));
return newsp;
}
/*
* create secpolicy structure from sadb_x_policy structure.
* NOTE: `state', `secpolicyindex' in secpolicy structure are not set,
* so must be set properly later.
*/
struct secpolicy *
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_msg2sp(struct sadb_x_policy *xpl0, size_t len, int *error)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct secpolicy *newsp;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(xpl0 != NULL, ("null xpl0"));
Unbreak FAST_IPSEC build on 64 bit archs with INVARIANTS. Approved by: sam
2004-04-07 00:19:02 +00:00
IPSEC_ASSERT(len >= sizeof(*xpl0), ("policy too short: %zu", len));
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (len != PFKEY_EXTLEN(xpl0)) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: Invalid msg length.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
*error = EINVAL;
return NULL;
}
if ((newsp = KEY_NEWSP()) == NULL) {
*error = ENOBUFS;
return NULL;
}
newsp->spidx.dir = xpl0->sadb_x_policy_dir;
newsp->policy = xpl0->sadb_x_policy_type;
/* check policy */
switch (xpl0->sadb_x_policy_type) {
case IPSEC_POLICY_DISCARD:
case IPSEC_POLICY_NONE:
case IPSEC_POLICY_ENTRUST:
case IPSEC_POLICY_BYPASS:
newsp->req = NULL;
break;
case IPSEC_POLICY_IPSEC:
{
int tlen;
struct sadb_x_ipsecrequest *xisr;
struct ipsecrequest **p_isr = &newsp->req;
/* validity check */
if (PFKEY_EXTLEN(xpl0) < sizeof(*xpl0)) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: Invalid msg length.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
KEY_FREESP(&newsp);
*error = EINVAL;
return NULL;
}
tlen = PFKEY_EXTLEN(xpl0) - sizeof(*xpl0);
xisr = (struct sadb_x_ipsecrequest *)(xpl0 + 1);
while (tlen > 0) {
/* length check */
if (xisr->sadb_x_ipsecrequest_len < sizeof(*xisr)) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid ipsecrequest "
"length.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
KEY_FREESP(&newsp);
*error = EINVAL;
return NULL;
}
/* allocate request buffer */
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
/* NB: data structure is zero'd */
*p_isr = ipsec_newisr();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if ((*p_isr) == NULL) {
ipseclog((LOG_DEBUG,
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
"%s: No more memory.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
KEY_FREESP(&newsp);
*error = ENOBUFS;
return NULL;
}
/* set values */
switch (xisr->sadb_x_ipsecrequest_proto) {
case IPPROTO_ESP:
case IPPROTO_AH:
case IPPROTO_IPCOMP:
break;
default:
ipseclog((LOG_DEBUG,
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
"%s: invalid proto type=%u\n", __func__,
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
xisr->sadb_x_ipsecrequest_proto));
KEY_FREESP(&newsp);
*error = EPROTONOSUPPORT;
return NULL;
}
(*p_isr)->saidx.proto = xisr->sadb_x_ipsecrequest_proto;
switch (xisr->sadb_x_ipsecrequest_mode) {
case IPSEC_MODE_TRANSPORT:
case IPSEC_MODE_TUNNEL:
break;
case IPSEC_MODE_ANY:
default:
ipseclog((LOG_DEBUG,
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
"%s: invalid mode=%u\n", __func__,
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
xisr->sadb_x_ipsecrequest_mode));
KEY_FREESP(&newsp);
*error = EINVAL;
return NULL;
}
(*p_isr)->saidx.mode = xisr->sadb_x_ipsecrequest_mode;
switch (xisr->sadb_x_ipsecrequest_level) {
case IPSEC_LEVEL_DEFAULT:
case IPSEC_LEVEL_USE:
case IPSEC_LEVEL_REQUIRE:
break;
case IPSEC_LEVEL_UNIQUE:
/* validity check */
/*
* If range violation of reqid, kernel will
* update it, don't refuse it.
*/
if (xisr->sadb_x_ipsecrequest_reqid
> IPSEC_MANUAL_REQID_MAX) {
ipseclog((LOG_DEBUG,
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
"%s: reqid=%d range "
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
"violation, updated by kernel.\n",
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
__func__,
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
xisr->sadb_x_ipsecrequest_reqid));
xisr->sadb_x_ipsecrequest_reqid = 0;
}
/* allocate new reqid id if reqid is zero. */
if (xisr->sadb_x_ipsecrequest_reqid == 0) {
u_int32_t reqid;
if ((reqid = key_newreqid()) == 0) {
KEY_FREESP(&newsp);
*error = ENOBUFS;
return NULL;
}
(*p_isr)->saidx.reqid = reqid;
xisr->sadb_x_ipsecrequest_reqid = reqid;
} else {
/* set it for manual keying. */
(*p_isr)->saidx.reqid =
xisr->sadb_x_ipsecrequest_reqid;
}
break;
default:
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid level=%u\n",
__func__,
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
xisr->sadb_x_ipsecrequest_level));
KEY_FREESP(&newsp);
*error = EINVAL;
return NULL;
}
(*p_isr)->level = xisr->sadb_x_ipsecrequest_level;
/* set IP addresses if there */
if (xisr->sadb_x_ipsecrequest_len > sizeof(*xisr)) {
struct sockaddr *paddr;
paddr = (struct sockaddr *)(xisr + 1);
/* validity check */
if (paddr->sa_len
> sizeof((*p_isr)->saidx.src)) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid "
"request address length.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
KEY_FREESP(&newsp);
*error = EINVAL;
return NULL;
}
bcopy(paddr, &(*p_isr)->saidx.src,
paddr->sa_len);
paddr = (struct sockaddr *)((caddr_t)paddr
+ paddr->sa_len);
/* validity check */
if (paddr->sa_len
> sizeof((*p_isr)->saidx.dst)) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid "
"request address length.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
KEY_FREESP(&newsp);
*error = EINVAL;
return NULL;
}
bcopy(paddr, &(*p_isr)->saidx.dst,
paddr->sa_len);
}
(*p_isr)->sp = newsp;
/* initialization for the next. */
p_isr = &(*p_isr)->next;
tlen -= xisr->sadb_x_ipsecrequest_len;
/* validity check */
if (tlen < 0) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: becoming tlen < 0.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
KEY_FREESP(&newsp);
*error = EINVAL;
return NULL;
}
xisr = (struct sadb_x_ipsecrequest *)((caddr_t)xisr
+ xisr->sadb_x_ipsecrequest_len);
}
}
break;
default:
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid policy type.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
KEY_FREESP(&newsp);
*error = EINVAL;
return NULL;
}
*error = 0;
return newsp;
}
static u_int32_t
key_newreqid()
{
static u_int32_t auto_reqid = IPSEC_MANUAL_REQID_MAX + 1;
auto_reqid = (auto_reqid == ~0
? IPSEC_MANUAL_REQID_MAX + 1 : auto_reqid + 1);
/* XXX should be unique check */
return auto_reqid;
}
/*
* copy secpolicy struct to sadb_x_policy structure indicated.
*/
struct mbuf *
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_sp2msg(struct secpolicy *sp)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct sadb_x_policy *xpl;
int tlen;
caddr_t p;
struct mbuf *m;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(sp != NULL, ("null policy"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
tlen = key_getspreqmsglen(sp);
Use m_get2() + m_align() instead of hand made key_alloc_mbuf(). Code examination shows, that although key_alloc_mbuf() could return chains, the callers never use chains, so m_get2() should suffice. Sponsored by: Nginx, Inc.
2013-03-15 10:20:15 +00:00
m = m_get2(tlen, M_NOWAIT, MT_DATA, 0);
if (m == NULL)
return (NULL);
m_align(m, tlen);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
m->m_len = tlen;
xpl = mtod(m, struct sadb_x_policy *);
bzero(xpl, tlen);
xpl->sadb_x_policy_len = PFKEY_UNIT64(tlen);
xpl->sadb_x_policy_exttype = SADB_X_EXT_POLICY;
xpl->sadb_x_policy_type = sp->policy;
xpl->sadb_x_policy_dir = sp->spidx.dir;
xpl->sadb_x_policy_id = sp->id;
p = (caddr_t)xpl + sizeof(*xpl);
/* if is the policy for ipsec ? */
if (sp->policy == IPSEC_POLICY_IPSEC) {
struct sadb_x_ipsecrequest *xisr;
struct ipsecrequest *isr;
for (isr = sp->req; isr != NULL; isr = isr->next) {
xisr = (struct sadb_x_ipsecrequest *)p;
xisr->sadb_x_ipsecrequest_proto = isr->saidx.proto;
xisr->sadb_x_ipsecrequest_mode = isr->saidx.mode;
xisr->sadb_x_ipsecrequest_level = isr->level;
xisr->sadb_x_ipsecrequest_reqid = isr->saidx.reqid;
p += sizeof(*xisr);
bcopy(&isr->saidx.src, p, isr->saidx.src.sa.sa_len);
p += isr->saidx.src.sa.sa_len;
bcopy(&isr->saidx.dst, p, isr->saidx.dst.sa.sa_len);
p += isr->saidx.src.sa.sa_len;
xisr->sadb_x_ipsecrequest_len =
PFKEY_ALIGN8(sizeof(*xisr)
+ isr->saidx.src.sa.sa_len
+ isr->saidx.dst.sa.sa_len);
}
}
return m;
}
/* m will not be freed nor modified */
static struct mbuf *
key_gather_mbuf(struct mbuf *m, const struct sadb_msghdr *mhp,
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
int ndeep, int nitem, ...)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
va_list ap;
int idx;
int i;
struct mbuf *result = NULL, *n;
int len;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(m != NULL, ("null mbuf"));
IPSEC_ASSERT(mhp != NULL, ("null msghdr"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
va_start(ap, nitem);
for (i = 0; i < nitem; i++) {
idx = va_arg(ap, int);
if (idx < 0 || idx > SADB_EXT_MAX)
goto fail;
/* don't attempt to pull empty extension */
if (idx == SADB_EXT_RESERVED && mhp->msg == NULL)
continue;
if (idx != SADB_EXT_RESERVED &&
(mhp->ext[idx] == NULL || mhp->extlen[idx] == 0))
continue;
if (idx == SADB_EXT_RESERVED) {
len = PFKEY_ALIGN8(sizeof(struct sadb_msg));
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(len <= MHLEN, ("header too big %u", len));
Mechanically substitute flags from historic mbuf allocator with malloc(9) flags within sys. Exceptions: - sys/contrib not touched - sys/mbuf.h edited manually
2012-12-05 08:04:20 +00:00
MGETHDR(n, M_NOWAIT, MT_DATA);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (!n)
goto fail;
n->m_len = len;
n->m_next = NULL;
m_copydata(m, 0, sizeof(struct sadb_msg),
mtod(n, caddr_t));
} else if (i < ndeep) {
len = mhp->extlen[idx];
Use m_get2() + m_align() instead of hand made key_alloc_mbuf(). Code examination shows, that although key_alloc_mbuf() could return chains, the callers never use chains, so m_get2() should suffice. Sponsored by: Nginx, Inc.
2013-03-15 10:20:15 +00:00
n = m_get2(len, M_NOWAIT, MT_DATA, 0);
if (n == NULL)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
goto fail;
Use m_get2() + m_align() instead of hand made key_alloc_mbuf(). Code examination shows, that although key_alloc_mbuf() could return chains, the callers never use chains, so m_get2() should suffice. Sponsored by: Nginx, Inc.
2013-03-15 10:20:15 +00:00
m_align(n, len);
n->m_len = len;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
m_copydata(m, mhp->extoff[idx], mhp->extlen[idx],
mtod(n, caddr_t));
} else {
n = m_copym(m, mhp->extoff[idx], mhp->extlen[idx],
Mechanically substitute flags from historic mbuf allocator with malloc(9) flags within sys. Exceptions: - sys/contrib not touched - sys/mbuf.h edited manually
2012-12-05 08:04:20 +00:00
M_NOWAIT);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
if (n == NULL)
goto fail;
if (result)
m_cat(result, n);
else
result = n;
}
va_end(ap);
if ((result->m_flags & M_PKTHDR) != 0) {
result->m_pkthdr.len = 0;
for (n = result; n; n = n->m_next)
result->m_pkthdr.len += n->m_len;
}
return result;
fail:
m_freem(result);
Add missing va_end() in an error case to clean up after va_start() (already done in the non-error case). CID: 4726 Found with: Coverity Prevent(tm) MFC after: 1 week
2011-10-07 21:00:26 +00:00
va_end(ap);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return NULL;
}
/*
* SADB_X_SPDADD, SADB_X_SPDSETIDX or SADB_X_SPDUPDATE processing
Correct typos, mostly s/ a / an / where appropriate. Some whitespace cleanup, especially in troff files.
2003-01-01 18:49:04 +00:00
* add an entry to SP database, when received
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
* <base, address(SD), (lifetime(H),) policy>
* from the user(?).
* Adding to SP database,
* and send
* <base, address(SD), (lifetime(H),) policy>
* to the socket which was send.
*
* SPDADD set a unique policy entry.
* SPDSETIDX like SPDADD without a part of policy requests.
* SPDUPDATE replace a unique policy entry.
*
* m will always be freed.
*/
static int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_spdadd(struct socket *so, struct mbuf *m, const struct sadb_msghdr *mhp)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct sadb_address *src0, *dst0;
struct sadb_x_policy *xpl0, *xpl;
struct sadb_lifetime *lft = NULL;
struct secpolicyindex spidx;
struct secpolicy *newsp;
int error;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(so != NULL, ("null socket"));
IPSEC_ASSERT(m != NULL, ("null mbuf"));
IPSEC_ASSERT(mhp != NULL, ("null msghdr"));
IPSEC_ASSERT(mhp->msg != NULL, ("null msg"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (mhp->ext[SADB_EXT_ADDRESS_SRC] == NULL ||
mhp->ext[SADB_EXT_ADDRESS_DST] == NULL ||
mhp->ext[SADB_X_EXT_POLICY] == NULL) {
ipseclog((LOG_DEBUG, "key_spdadd: invalid message is passed.\n"));
return key_senderror(so, m, EINVAL);
}
if (mhp->extlen[SADB_EXT_ADDRESS_SRC] < sizeof(struct sadb_address) ||
mhp->extlen[SADB_EXT_ADDRESS_DST] < sizeof(struct sadb_address) ||
mhp->extlen[SADB_X_EXT_POLICY] < sizeof(struct sadb_x_policy)) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid message is passed.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
if (mhp->ext[SADB_EXT_LIFETIME_HARD] != NULL) {
if (mhp->extlen[SADB_EXT_LIFETIME_HARD]
< sizeof(struct sadb_lifetime)) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid message is passed.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
lft = (struct sadb_lifetime *)mhp->ext[SADB_EXT_LIFETIME_HARD];
}
src0 = (struct sadb_address *)mhp->ext[SADB_EXT_ADDRESS_SRC];
dst0 = (struct sadb_address *)mhp->ext[SADB_EXT_ADDRESS_DST];
xpl0 = (struct sadb_x_policy *)mhp->ext[SADB_X_EXT_POLICY];
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
/*
* Note: do not parse SADB_X_EXT_NAT_T_* here:
* we are processing traffic endpoints.
*/
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* make secindex */
/* XXX boundary check against sa_len */
KEY_SETSECSPIDX(xpl0->sadb_x_policy_dir,
src0 + 1,
dst0 + 1,
src0->sadb_address_prefixlen,
dst0->sadb_address_prefixlen,
src0->sadb_address_proto,
&spidx);
/* checking the direciton. */
switch (xpl0->sadb_x_policy_dir) {
case IPSEC_DIR_INBOUND:
case IPSEC_DIR_OUTBOUND:
break;
default:
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: Invalid SP direction.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
mhp->msg->sadb_msg_errno = EINVAL;
return 0;
}
/* check policy */
/* key_spdadd() accepts DISCARD, NONE and IPSEC. */
if (xpl0->sadb_x_policy_type == IPSEC_POLICY_ENTRUST
|| xpl0->sadb_x_policy_type == IPSEC_POLICY_BYPASS) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: Invalid policy type.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
/* policy requests are mandatory when action is ipsec. */
if (mhp->msg->sadb_msg_type != SADB_X_SPDSETIDX
&& xpl0->sadb_x_policy_type == IPSEC_POLICY_IPSEC
&& mhp->extlen[SADB_X_EXT_POLICY] <= sizeof(*xpl0)) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: some policy requests part required\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
/*
* checking there is SP already or not.
* SPDUPDATE doesn't depend on whether there is a SP or not.
* If the type is either SPDADD or SPDSETIDX AND a SP is found,
* then error.
*/
newsp = key_getsp(&spidx);
if (mhp->msg->sadb_msg_type == SADB_X_SPDUPDATE) {
if (newsp) {
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
key_unlink(newsp);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
KEY_FREESP(&newsp);
}
} else {
if (newsp != NULL) {
KEY_FREESP(&newsp);
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: a SP entry exists already.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EEXIST);
}
}
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
/* XXX: there is race between key_getsp and key_msg2sp. */
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* allocation new SP entry */
if ((newsp = key_msg2sp(xpl0, PFKEY_EXTLEN(xpl0), &error)) == NULL) {
return key_senderror(so, m, error);
}
if ((newsp->id = key_getnewspid()) == 0) {
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
KEY_FREESP(&newsp);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, ENOBUFS);
}
/* XXX boundary check against sa_len */
KEY_SETSECSPIDX(xpl0->sadb_x_policy_dir,
src0 + 1,
dst0 + 1,
src0->sadb_address_prefixlen,
dst0->sadb_address_prefixlen,
src0->sadb_address_proto,
&newsp->spidx);
/* sanity check on addr pair */
if (((struct sockaddr *)(src0 + 1))->sa_family !=
((struct sockaddr *)(dst0+ 1))->sa_family) {
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
KEY_FREESP(&newsp);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
if (((struct sockaddr *)(src0 + 1))->sa_len !=
((struct sockaddr *)(dst0+ 1))->sa_len) {
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
KEY_FREESP(&newsp);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
#if 1
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
if (newsp->req && newsp->req->saidx.src.sa.sa_family &&
newsp->req->saidx.dst.sa.sa_family) {
if (newsp->req->saidx.src.sa.sa_family !=
newsp->req->saidx.dst.sa.sa_family) {
KEY_FREESP(&newsp);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
}
#endif
newsp->created = time_second;
newsp->lastused = newsp->created;
newsp->lifetime = lft ? lft->sadb_lifetime_addtime : 0;
newsp->validtime = lft ? lft->sadb_lifetime_usetime : 0;
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
SPTREE_WLOCK();
TAILQ_INSERT_TAIL(&V_sptree[newsp->spidx.dir], newsp, chain);
Fix possible memory leak and several races in the IPsec policy management code. Resurrect the state field in the struct secpolicy, it has IPSEC_SPSTATE_ALIVE value when security policy linked in the chain, and IPSEC_SPSTATE_DEAD value in all other cases. This field protects from trying to unlink one security policy several times from the different threads. Take additional reference in the key_flush_spd() to be sure that policy won't be freed from the different thread while we are sending SPDEXPIRE message. Add KEY_FREESP() call to the key_unlink() to release additional reference that we take when use key_getsp*() functions. Differential Revision: https://reviews.freebsd.org/D1914 Tested by: Emeric POUPON <emeric.poupon at stormshield dot eu> Reviewed by: hrs Sponsored by: Yandex LLC
2015-02-24 10:35:07 +00:00
newsp->state = IPSEC_SPSTATE_ALIVE;
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
SPTREE_WUNLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* delete the entry in spacqtree */
if (mhp->msg->sadb_msg_type == SADB_X_SPDUPDATE) {
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
struct secspacq *spacq = key_getspacq(&spidx);
if (spacq != NULL) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* reset counter in order to deletion by timehandler. */
spacq->created = time_second;
spacq->count = 0;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SPACQ_UNLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
}
{
struct mbuf *n, *mpolicy;
struct sadb_msg *newmsg;
int off;
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
/*
* Note: do not send SADB_X_EXT_NAT_T_* here:
* we are sending traffic endpoints.
*/
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* create new sadb_msg to reply. */
if (lft) {
n = key_gather_mbuf(m, mhp, 2, 5, SADB_EXT_RESERVED,
SADB_X_EXT_POLICY, SADB_EXT_LIFETIME_HARD,
SADB_EXT_ADDRESS_SRC, SADB_EXT_ADDRESS_DST);
} else {
n = key_gather_mbuf(m, mhp, 2, 4, SADB_EXT_RESERVED,
SADB_X_EXT_POLICY,
SADB_EXT_ADDRESS_SRC, SADB_EXT_ADDRESS_DST);
}
if (!n)
return key_senderror(so, m, ENOBUFS);
if (n->m_len < sizeof(*newmsg)) {
n = m_pullup(n, sizeof(*newmsg));
if (!n)
return key_senderror(so, m, ENOBUFS);
}
newmsg = mtod(n, struct sadb_msg *);
newmsg->sadb_msg_errno = 0;
newmsg->sadb_msg_len = PFKEY_UNIT64(n->m_pkthdr.len);
off = 0;
mpolicy = m_pulldown(n, PFKEY_ALIGN8(sizeof(struct sadb_msg)),
sizeof(*xpl), &off);
if (mpolicy == NULL) {
/* n is already freed */
return key_senderror(so, m, ENOBUFS);
}
xpl = (struct sadb_x_policy *)(mtod(mpolicy, caddr_t) + off);
if (xpl->sadb_x_policy_exttype != SADB_X_EXT_POLICY) {
m_freem(n);
return key_senderror(so, m, EINVAL);
}
xpl->sadb_x_policy_id = newsp->id;
m_freem(m);
return key_sendup_mbuf(so, n, KEY_SENDUP_ALL);
}
}
/*
* get new policy id.
* OUT:
* 0: failure.
* others: success.
*/
static u_int32_t
key_getnewspid()
{
u_int32_t newid = 0;
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
int count = V_key_spi_trycnt; /* XXX */
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
struct secpolicy *sp;
/* when requesting to allocate spi ranged */
while (count--) {
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
newid = (V_policy_id = (V_policy_id == ~0 ? 1 : V_policy_id + 1));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if ((sp = key_getspbyid(newid)) == NULL)
break;
KEY_FREESP(&sp);
}
if (count == 0 || newid == 0) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: to allocate policy id is failed.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return 0;
}
return newid;
}
/*
* SADB_SPDDELETE processing
* receive
* <base, address(SD), policy(*)>
* from the user(?), and set SADB_SASTATE_DEAD,
* and send,
* <base, address(SD), policy(*)>
* to the ikmpd.
* policy(*) including direction of policy.
*
* m will always be freed.
*/
static int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_spddelete(struct socket *so, struct mbuf *m,
const struct sadb_msghdr *mhp)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct sadb_address *src0, *dst0;
struct sadb_x_policy *xpl0;
struct secpolicyindex spidx;
struct secpolicy *sp;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(so != NULL, ("null so"));
IPSEC_ASSERT(m != NULL, ("null mbuf"));
IPSEC_ASSERT(mhp != NULL, ("null msghdr"));
IPSEC_ASSERT(mhp->msg != NULL, ("null msg"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (mhp->ext[SADB_EXT_ADDRESS_SRC] == NULL ||
mhp->ext[SADB_EXT_ADDRESS_DST] == NULL ||
mhp->ext[SADB_X_EXT_POLICY] == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid message is passed.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
if (mhp->extlen[SADB_EXT_ADDRESS_SRC] < sizeof(struct sadb_address) ||
mhp->extlen[SADB_EXT_ADDRESS_DST] < sizeof(struct sadb_address) ||
mhp->extlen[SADB_X_EXT_POLICY] < sizeof(struct sadb_x_policy)) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid message is passed.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
src0 = (struct sadb_address *)mhp->ext[SADB_EXT_ADDRESS_SRC];
dst0 = (struct sadb_address *)mhp->ext[SADB_EXT_ADDRESS_DST];
xpl0 = (struct sadb_x_policy *)mhp->ext[SADB_X_EXT_POLICY];
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
/*
* Note: do not parse SADB_X_EXT_NAT_T_* here:
* we are processing traffic endpoints.
*/
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* make secindex */
/* XXX boundary check against sa_len */
KEY_SETSECSPIDX(xpl0->sadb_x_policy_dir,
src0 + 1,
dst0 + 1,
src0->sadb_address_prefixlen,
dst0->sadb_address_prefixlen,
src0->sadb_address_proto,
&spidx);
/* checking the direciton. */
switch (xpl0->sadb_x_policy_dir) {
case IPSEC_DIR_INBOUND:
case IPSEC_DIR_OUTBOUND:
break;
default:
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: Invalid SP direction.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
/* Is there SP in SPD ? */
if ((sp = key_getsp(&spidx)) == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: no SP found.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
/* save policy id to buffer to be returned. */
xpl0->sadb_x_policy_id = sp->id;
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
key_unlink(sp);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
KEY_FREESP(&sp);
{
struct mbuf *n;
struct sadb_msg *newmsg;
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
/*
* Note: do not send SADB_X_EXT_NAT_T_* here:
* we are sending traffic endpoints.
*/
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* create new sadb_msg to reply. */
n = key_gather_mbuf(m, mhp, 1, 4, SADB_EXT_RESERVED,
SADB_X_EXT_POLICY, SADB_EXT_ADDRESS_SRC, SADB_EXT_ADDRESS_DST);
if (!n)
return key_senderror(so, m, ENOBUFS);
newmsg = mtod(n, struct sadb_msg *);
newmsg->sadb_msg_errno = 0;
newmsg->sadb_msg_len = PFKEY_UNIT64(n->m_pkthdr.len);
m_freem(m);
return key_sendup_mbuf(so, n, KEY_SENDUP_ALL);
}
}
/*
* SADB_SPDDELETE2 processing
* receive
* <base, policy(*)>
* from the user(?), and set SADB_SASTATE_DEAD,
* and send,
* <base, policy(*)>
* to the ikmpd.
* policy(*) including direction of policy.
*
* m will always be freed.
*/
static int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_spddelete2(struct socket *so, struct mbuf *m,
const struct sadb_msghdr *mhp)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
u_int32_t id;
struct secpolicy *sp;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(so != NULL, ("null socket"));
IPSEC_ASSERT(m != NULL, ("null mbuf"));
IPSEC_ASSERT(mhp != NULL, ("null msghdr"));
IPSEC_ASSERT(mhp->msg != NULL, ("null msg"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (mhp->ext[SADB_X_EXT_POLICY] == NULL ||
mhp->extlen[SADB_X_EXT_POLICY] < sizeof(struct sadb_x_policy)) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid message is passed.\n", __func__));
Add a missing return so that we drop out in case of an error and do not continue with a NULL pointer. [1] While here change the return of the error handling code path above. I cannot see why we should always return 0 there. Neither does KAME nor do we in here for the similar check in all the other functions. Found with: Coverity Prevent(tm) [1] CID: 2521
2007-06-15 23:45:39 +00:00
return key_senderror(so, m, EINVAL);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
id = ((struct sadb_x_policy *)mhp->ext[SADB_X_EXT_POLICY])->sadb_x_policy_id;
/* Is there SP in SPD ? */
if ((sp = key_getspbyid(id)) == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: no SP found id:%u.\n", __func__, id));
Add a missing return so that we drop out in case of an error and do not continue with a NULL pointer. [1] While here change the return of the error handling code path above. I cannot see why we should always return 0 there. Neither does KAME nor do we in here for the similar check in all the other functions. Found with: Coverity Prevent(tm) [1] CID: 2521
2007-06-15 23:45:39 +00:00
return key_senderror(so, m, EINVAL);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
key_unlink(sp);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
KEY_FREESP(&sp);
{
struct mbuf *n, *nn;
struct sadb_msg *newmsg;
int off, len;
/* create new sadb_msg to reply. */
len = PFKEY_ALIGN8(sizeof(struct sadb_msg));
Mechanically substitute flags from historic mbuf allocator with malloc(9) flags within sys. Exceptions: - sys/contrib not touched - sys/mbuf.h edited manually
2012-12-05 08:04:20 +00:00
MGETHDR(n, M_NOWAIT, MT_DATA);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (n && len > MHLEN) {
In order to reduce use of M_EXT outside of the mbuf allocator and socket-buffer implementations, introduce a return value for MCLGET() (and m_cljget() that underlies it) to allow the caller to avoid testing M_EXT itself. Update all callers to use the return value. With this change, very few network device drivers remain aware of M_EXT; the primary exceptions lie in mbuf-chain pretty printers for debugging, and in a few cases, custom mbuf and cluster allocation implementations. NB: This is a difficult-to-test change as it touches many drivers for which I don't have physical devices. Instead we've gone for intensive review, but further post-commit review would definitely be appreciated to spot errors where changes could not easily be made mechanically, but were largely mechanical in nature. Differential Revision: https://reviews.freebsd.org/D1440 Reviewed by: adrian, bz, gnn Sponsored by: EMC / Isilon Storage Division
2015-01-06 12:59:37 +00:00
if (!(MCLGET(n, M_NOWAIT))) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
m_freem(n);
n = NULL;
}
}
if (!n)
return key_senderror(so, m, ENOBUFS);
n->m_len = len;
n->m_next = NULL;
off = 0;
m_copydata(m, 0, sizeof(struct sadb_msg), mtod(n, caddr_t) + off);
off += PFKEY_ALIGN8(sizeof(struct sadb_msg));
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(off == len, ("length inconsistency (off %u len %u)",
off, len));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
n->m_next = m_copym(m, mhp->extoff[SADB_X_EXT_POLICY],
Mechanically substitute flags from historic mbuf allocator with malloc(9) flags within sys. Exceptions: - sys/contrib not touched - sys/mbuf.h edited manually
2012-12-05 08:04:20 +00:00
mhp->extlen[SADB_X_EXT_POLICY], M_NOWAIT);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (!n->m_next) {
m_freem(n);
return key_senderror(so, m, ENOBUFS);
}
n->m_pkthdr.len = 0;
for (nn = n; nn; nn = nn->m_next)
n->m_pkthdr.len += nn->m_len;
newmsg = mtod(n, struct sadb_msg *);
newmsg->sadb_msg_errno = 0;
newmsg->sadb_msg_len = PFKEY_UNIT64(n->m_pkthdr.len);
m_freem(m);
return key_sendup_mbuf(so, n, KEY_SENDUP_ALL);
}
}
/*
In the reply to SADB_X_SPDGET message use the same sequence number that was in the request. Some IKE deamons expect it will the same. Linux and NetBSD also follow this behaviour. PR: 137309 MFC after: 2 weeks
2015-05-20 11:59:53 +00:00
* SADB_X_SPDGET processing
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
* receive
* <base, policy(*)>
* from the user(?),
* and send,
* <base, address(SD), policy>
* to the ikmpd.
* policy(*) including direction of policy.
*
* m will always be freed.
*/
static int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_spdget(struct socket *so, struct mbuf *m, const struct sadb_msghdr *mhp)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
u_int32_t id;
struct secpolicy *sp;
struct mbuf *n;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(so != NULL, ("null socket"));
IPSEC_ASSERT(m != NULL, ("null mbuf"));
IPSEC_ASSERT(mhp != NULL, ("null msghdr"));
IPSEC_ASSERT(mhp->msg != NULL, ("null msg"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (mhp->ext[SADB_X_EXT_POLICY] == NULL ||
mhp->extlen[SADB_X_EXT_POLICY] < sizeof(struct sadb_x_policy)) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid message is passed.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
id = ((struct sadb_x_policy *)mhp->ext[SADB_X_EXT_POLICY])->sadb_x_policy_id;
/* Is there SP in SPD ? */
if ((sp = key_getspbyid(id)) == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: no SP found id:%u.\n", __func__, id));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, ENOENT);
}
In the reply to SADB_X_SPDGET message use the same sequence number that was in the request. Some IKE deamons expect it will the same. Linux and NetBSD also follow this behaviour. PR: 137309 MFC after: 2 weeks
2015-05-20 11:59:53 +00:00
n = key_setdumpsp(sp, SADB_X_SPDGET, mhp->msg->sadb_msg_seq,
mhp->msg->sadb_msg_pid);
Release SP's refcount in key_get_spdbyid(). PR: 156676 Submitted by: Tobias Brunner (tobias@strongswan.org) MFC after: 1 week
2011-05-09 13:16:21 +00:00
KEY_FREESP(&sp);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (n != NULL) {
m_freem(m);
return key_sendup_mbuf(so, n, KEY_SENDUP_ONE);
} else
return key_senderror(so, m, ENOBUFS);
}
/*
* SADB_X_SPDACQUIRE processing.
* Acquire policy and SA(s) for a *OUTBOUND* packet.
* send
* <base, policy(*)>
* to KMD, and expect to receive
* <base> with SADB_X_SPDACQUIRE if error occured,
* or
* <base, policy>
* with SADB_X_SPDUPDATE from KMD by PF_KEY.
* policy(*) is without policy requests.
*
* 0 : succeed
* others: error number
*/
int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_spdacquire(struct secpolicy *sp)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct mbuf *result = NULL, *m;
struct secspacq *newspacq;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(sp != NULL, ("null secpolicy"));
IPSEC_ASSERT(sp->req == NULL, ("policy exists"));
IPSEC_ASSERT(sp->policy == IPSEC_POLICY_IPSEC,
("policy not IPSEC %u", sp->policy));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Correct typos, mostly s/ a / an / where appropriate. Some whitespace cleanup, especially in troff files.
2003-01-01 18:49:04 +00:00
/* Get an entry to check whether sent message or not. */
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
newspacq = key_getspacq(&sp->spidx);
if (newspacq != NULL) {
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
if (V_key_blockacq_count < newspacq->count) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* reset counter and do send message. */
newspacq->count = 0;
} else {
/* increment counter and do nothing. */
newspacq->count++;
key_getspacq() returns holding the spacq_lock. Unlock it in all cases. MFC after: 1 week Sponsored by: Yandex LLC
2014-12-07 06:47:00 +00:00
SPACQ_UNLOCK();
return (0);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SPACQ_UNLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
} else {
/* make new entry for blocking to send SADB_ACQUIRE. */
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
newspacq = key_newspacq(&sp->spidx);
if (newspacq == NULL)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return ENOBUFS;
}
/* create new sadb_msg to reply. */
m = key_setsadbmsg(SADB_X_SPDACQUIRE, 0, 0, 0, 0, 0);
In case of failure we can directly return ENOBUFS because 'result' is still NULL and we do not need to free anything. That allows us to gc the entire goto parts and a now unused variable. Found with: Coverity Prevent(tm) CID: 2519
2007-06-16 00:15:14 +00:00
if (!m)
return ENOBUFS;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
result = m;
result->m_pkthdr.len = 0;
for (m = result; m; m = m->m_next)
result->m_pkthdr.len += m->m_len;
mtod(result, struct sadb_msg *)->sadb_msg_len =
PFKEY_UNIT64(result->m_pkthdr.len);
return key_sendup_mbuf(NULL, m, KEY_SENDUP_REGISTERED);
}
/*
* SADB_SPDFLUSH processing
* receive
* <base>
* from the user, and free all entries in secpctree.
* and send,
* <base>
* to the user.
* NOTE: what to do is only marking SADB_SASTATE_DEAD.
*
* m will always be freed.
*/
static int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_spdflush(struct socket *so, struct mbuf *m, const struct sadb_msghdr *mhp)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
TAILQ_HEAD(, secpolicy) drainq;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
struct sadb_msg *newmsg;
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
struct secpolicy *sp, *nextsp;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
u_int dir;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(so != NULL, ("null socket"));
IPSEC_ASSERT(m != NULL, ("null mbuf"));
IPSEC_ASSERT(mhp != NULL, ("null msghdr"));
IPSEC_ASSERT(mhp->msg != NULL, ("null msg"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (m->m_len != PFKEY_ALIGN8(sizeof(struct sadb_msg)))
return key_senderror(so, m, EINVAL);
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
TAILQ_INIT(&drainq);
SPTREE_WLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
for (dir = 0; dir < IPSEC_DIR_MAX; dir++) {
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
TAILQ_CONCAT(&drainq, &V_sptree[dir], chain);
}
Fix possible memory leak and several races in the IPsec policy management code. Resurrect the state field in the struct secpolicy, it has IPSEC_SPSTATE_ALIVE value when security policy linked in the chain, and IPSEC_SPSTATE_DEAD value in all other cases. This field protects from trying to unlink one security policy several times from the different threads. Take additional reference in the key_flush_spd() to be sure that policy won't be freed from the different thread while we are sending SPDEXPIRE message. Add KEY_FREESP() call to the key_unlink() to release additional reference that we take when use key_getsp*() functions. Differential Revision: https://reviews.freebsd.org/D1914 Tested by: Emeric POUPON <emeric.poupon at stormshield dot eu> Reviewed by: hrs Sponsored by: Yandex LLC
2015-02-24 10:35:07 +00:00
/*
* We need to set state to DEAD for each policy to be sure,
* that another thread won't try to unlink it.
*/
TAILQ_FOREACH(sp, &drainq, chain)
sp->state = IPSEC_SPSTATE_DEAD;
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
SPTREE_WUNLOCK();
sp = TAILQ_FIRST(&drainq);
while (sp != NULL) {
nextsp = TAILQ_NEXT(sp, chain);
KEY_FREESP(&sp);
sp = nextsp;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
if (sizeof(struct sadb_msg) > m->m_len + M_TRAILINGSPACE(m)) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: No more memory.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, ENOBUFS);
}
if (m->m_next)
m_freem(m->m_next);
m->m_next = NULL;
m->m_pkthdr.len = m->m_len = PFKEY_ALIGN8(sizeof(struct sadb_msg));
newmsg = mtod(m, struct sadb_msg *);
newmsg->sadb_msg_errno = 0;
newmsg->sadb_msg_len = PFKEY_UNIT64(m->m_pkthdr.len);
return key_sendup_mbuf(so, m, KEY_SENDUP_ALL);
}
/*
* SADB_SPDDUMP processing
* receive
* <base>
* from the user, and dump all SP leaves
* and send,
* <base> .....
* to the ikmpd.
*
* m will always be freed.
*/
static int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_spddump(struct socket *so, struct mbuf *m, const struct sadb_msghdr *mhp)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
SPTREE_RLOCK_TRACKER;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
struct secpolicy *sp;
int cnt;
u_int dir;
struct mbuf *n;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(so != NULL, ("null socket"));
IPSEC_ASSERT(m != NULL, ("null mbuf"));
IPSEC_ASSERT(mhp != NULL, ("null msghdr"));
IPSEC_ASSERT(mhp->msg != NULL, ("null msg"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* search SPD entry and get buffer size. */
cnt = 0;
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
SPTREE_RLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
for (dir = 0; dir < IPSEC_DIR_MAX; dir++) {
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
TAILQ_FOREACH(sp, &V_sptree[dir], chain) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
cnt++;
}
}
Lock SPTREE before parsing it in key_spddump() Approved by: gnn(mentor) Obtained from: NETASQ MFC after: 2 weeks
2009-05-27 09:44:14 +00:00
if (cnt == 0) {
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
SPTREE_RUNLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, ENOENT);
Lock SPTREE before parsing it in key_spddump() Approved by: gnn(mentor) Obtained from: NETASQ MFC after: 2 weeks
2009-05-27 09:44:14 +00:00
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
for (dir = 0; dir < IPSEC_DIR_MAX; dir++) {
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
TAILQ_FOREACH(sp, &V_sptree[dir], chain) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
--cnt;
n = key_setdumpsp(sp, SADB_X_SPDDUMP, cnt,
mhp->msg->sadb_msg_pid);
if (n)
key_sendup_mbuf(so, n, KEY_SENDUP_ONE);
}
}
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
SPTREE_RUNLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
m_freem(m);
return 0;
}
static struct mbuf *
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_setdumpsp(struct secpolicy *sp, u_int8_t type, u_int32_t seq,
u_int32_t pid)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct mbuf *result = NULL, *m;
Add lifetime informations to generated SPD entries when SPDDUMP Approved by: gnn (mentor) MFC after: 4 weeks
2008-08-05 15:36:50 +00:00
struct seclifetime lt;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
m = key_setsadbmsg(type, 0, SADB_SATYPE_UNSPEC, seq, pid, sp->refcnt);
if (!m)
goto fail;
result = m;
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
/*
* Note: do not send SADB_X_EXT_NAT_T_* here:
* we are sending traffic endpoints.
*/
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
m = key_setsadbaddr(SADB_EXT_ADDRESS_SRC,
&sp->spidx.src.sa, sp->spidx.prefs,
sp->spidx.ul_proto);
if (!m)
goto fail;
m_cat(result, m);
m = key_setsadbaddr(SADB_EXT_ADDRESS_DST,
&sp->spidx.dst.sa, sp->spidx.prefd,
sp->spidx.ul_proto);
if (!m)
goto fail;
m_cat(result, m);
m = key_sp2msg(sp);
if (!m)
goto fail;
m_cat(result, m);
Add lifetime informations to generated SPD entries when SPDDUMP Approved by: gnn (mentor) MFC after: 4 weeks
2008-08-05 15:36:50 +00:00
if(sp->lifetime){
lt.addtime=sp->created;
lt.usetime= sp->lastused;
m = key_setlifetime(&lt, SADB_EXT_LIFETIME_CURRENT);
if (!m)
goto fail;
m_cat(result, m);
lt.addtime=sp->lifetime;
lt.usetime= sp->validtime;
m = key_setlifetime(&lt, SADB_EXT_LIFETIME_HARD);
if (!m)
goto fail;
m_cat(result, m);
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if ((result->m_flags & M_PKTHDR) == 0)
goto fail;
if (result->m_len < sizeof(struct sadb_msg)) {
result = m_pullup(result, sizeof(struct sadb_msg));
if (result == NULL)
goto fail;
}
result->m_pkthdr.len = 0;
for (m = result; m; m = m->m_next)
result->m_pkthdr.len += m->m_len;
mtod(result, struct sadb_msg *)->sadb_msg_len =
PFKEY_UNIT64(result->m_pkthdr.len);
return result;
fail:
m_freem(result);
return NULL;
}
/*
* get PFKEY message length for security policy and request.
*/
static u_int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_getspreqmsglen(struct secpolicy *sp)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
u_int tlen;
tlen = sizeof(struct sadb_x_policy);
/* if is the policy for ipsec ? */
if (sp->policy != IPSEC_POLICY_IPSEC)
return tlen;
/* get length of ipsec requests */
{
struct ipsecrequest *isr;
int len;
for (isr = sp->req; isr != NULL; isr = isr->next) {
len = sizeof(struct sadb_x_ipsecrequest)
+ isr->saidx.src.sa.sa_len
+ isr->saidx.dst.sa.sa_len;
tlen += PFKEY_ALIGN8(len);
}
}
return tlen;
}
/*
* SADB_SPDEXPIRE processing
* send
* <base, address(SD), lifetime(CH), policy>
* to KMD by PF_KEY.
*
* OUT: 0 : succeed
* others : error number
*/
static int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_spdexpire(struct secpolicy *sp)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct mbuf *result = NULL, *m;
int len;
int error = -1;
struct sadb_lifetime *lt;
/* XXX: Why do we lock ? */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(sp != NULL, ("null secpolicy"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* set msg header */
m = key_setsadbmsg(SADB_X_SPDEXPIRE, 0, 0, 0, 0, 0);
if (!m) {
error = ENOBUFS;
goto fail;
}
result = m;
/* create lifetime extension (current and hard) */
len = PFKEY_ALIGN8(sizeof(*lt)) * 2;
Use m_get2() + m_align() instead of hand made key_alloc_mbuf(). Code examination shows, that although key_alloc_mbuf() could return chains, the callers never use chains, so m_get2() should suffice. Sponsored by: Nginx, Inc.
2013-03-15 10:20:15 +00:00
m = m_get2(len, M_NOWAIT, MT_DATA, 0);
if (m == NULL) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = ENOBUFS;
goto fail;
}
Use m_get2() + m_align() instead of hand made key_alloc_mbuf(). Code examination shows, that although key_alloc_mbuf() could return chains, the callers never use chains, so m_get2() should suffice. Sponsored by: Nginx, Inc.
2013-03-15 10:20:15 +00:00
m_align(m, len);
m->m_len = len;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
bzero(mtod(m, caddr_t), len);
lt = mtod(m, struct sadb_lifetime *);
lt->sadb_lifetime_len = PFKEY_UNIT64(sizeof(struct sadb_lifetime));
lt->sadb_lifetime_exttype = SADB_EXT_LIFETIME_CURRENT;
lt->sadb_lifetime_allocations = 0;
lt->sadb_lifetime_bytes = 0;
lt->sadb_lifetime_addtime = sp->created;
lt->sadb_lifetime_usetime = sp->lastused;
lt = (struct sadb_lifetime *)(mtod(m, caddr_t) + len / 2);
lt->sadb_lifetime_len = PFKEY_UNIT64(sizeof(struct sadb_lifetime));
lt->sadb_lifetime_exttype = SADB_EXT_LIFETIME_HARD;
lt->sadb_lifetime_allocations = 0;
lt->sadb_lifetime_bytes = 0;
lt->sadb_lifetime_addtime = sp->lifetime;
lt->sadb_lifetime_usetime = sp->validtime;
m_cat(result, m);
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
/*
* Note: do not send SADB_X_EXT_NAT_T_* here:
* we are sending traffic endpoints.
*/
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* set sadb_address for source */
m = key_setsadbaddr(SADB_EXT_ADDRESS_SRC,
&sp->spidx.src.sa,
sp->spidx.prefs, sp->spidx.ul_proto);
if (!m) {
error = ENOBUFS;
goto fail;
}
m_cat(result, m);
/* set sadb_address for destination */
m = key_setsadbaddr(SADB_EXT_ADDRESS_DST,
&sp->spidx.dst.sa,
sp->spidx.prefd, sp->spidx.ul_proto);
if (!m) {
error = ENOBUFS;
goto fail;
}
m_cat(result, m);
/* set secpolicy */
m = key_sp2msg(sp);
if (!m) {
error = ENOBUFS;
goto fail;
}
m_cat(result, m);
if ((result->m_flags & M_PKTHDR) == 0) {
error = EINVAL;
goto fail;
}
if (result->m_len < sizeof(struct sadb_msg)) {
result = m_pullup(result, sizeof(struct sadb_msg));
if (result == NULL) {
error = ENOBUFS;
goto fail;
}
}
result->m_pkthdr.len = 0;
for (m = result; m; m = m->m_next)
result->m_pkthdr.len += m->m_len;
mtod(result, struct sadb_msg *)->sadb_msg_len =
PFKEY_UNIT64(result->m_pkthdr.len);
return key_sendup_mbuf(NULL, result, KEY_SENDUP_REGISTERED);
fail:
if (result)
m_freem(result);
return error;
}
/* %%% SAD management */
/*
* allocating a memory for new SA head, and copy from the values of mhp.
* OUT: NULL : failure due to the lack of memory.
* others : pointer to new SA head.
*/
static struct secashead *
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_newsah(struct secasindex *saidx)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct secashead *newsah;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(saidx != NULL, ("null saidx"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
newsah = malloc(sizeof(struct secashead), M_IPSEC_SAH, M_NOWAIT|M_ZERO);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (newsah != NULL) {
int i;
for (i = 0; i < sizeof(newsah->savtree)/sizeof(newsah->savtree[0]); i++)
LIST_INIT(&newsah->savtree[i]);
newsah->saidx = *saidx;
/* add to saidxtree */
newsah->state = SADB_SASTATE_MATURE;
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_LOCK();
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
LIST_INSERT_HEAD(&V_sahtree, newsah, chain);
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_UNLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
return(newsah);
}
/*
* delete SA index and all SA registerd.
*/
static void
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_delsah(struct secashead *sah)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct secasvar *sav, *nextsav;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
u_int stateidx;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
int zombie = 0;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(sah != NULL, ("NULL sah"));
SAHTREE_LOCK_ASSERT();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* searching all SA registerd in the secindex. */
for (stateidx = 0;
Merge more of currently non-functional (i.e. resolving to whitespace) macros from p4/vimage branch. Do a better job at enclosing all instantiations of globals scheduled for virtualization in #ifdef VIMAGE_GLOBALS blocks. De-virtualize and mark as const saorder_state_alive and saorder_state_any arrays from ipsec code, given that they are never updated at runtime, so virtualizing them would be pointless. Reviewed by: bz, julian Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-11-26 22:32:07 +00:00
stateidx < _ARRAYLEN(saorder_state_any);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
stateidx++) {
Merge more of currently non-functional (i.e. resolving to whitespace) macros from p4/vimage branch. Do a better job at enclosing all instantiations of globals scheduled for virtualization in #ifdef VIMAGE_GLOBALS blocks. De-virtualize and mark as const saorder_state_alive and saorder_state_any arrays from ipsec code, given that they are never updated at runtime, so virtualizing them would be pointless. Reviewed by: bz, julian Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-11-26 22:32:07 +00:00
u_int state = saorder_state_any[stateidx];
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
LIST_FOREACH_SAFE(sav, &sah->savtree[state], chain, nextsav) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (sav->refcnt == 0) {
/* sanity check */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
KEY_CHKSASTATE(state, sav->state, __func__);
Fixed style for some comments Approved by: gnn(mentor)
2009-03-19 15:44:13 +00:00
/*
* do NOT call KEY_FREESAV here:
* it will only delete the sav if refcnt == 1,
Fixed deletion of sav entries in key_delsah() Approved by: gnn(mentor) Obtained from: NETASQ MFC after: 1 month
2009-03-18 14:01:41 +00:00
* where we already know that refcnt == 0
*/
key_delsav(sav);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
} else {
/* give up to delete this sa */
zombie++;
}
}
}
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
if (!zombie) { /* delete only if there are savs */
/* remove from tree of SA index */
if (__LIST_CHAINED(sah))
LIST_REMOVE(sah, chain);
free(sah, M_IPSEC_SAH);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
}
/*
* allocating a new SA with LARVAL state. key_add() and key_getspi() call,
* and copy the values of mhp into new buffer.
* When SAD message type is GETSPI:
* to set sequence number from acq_seq++,
* to set zero to SPI.
* not to call key_setsava().
* OUT: NULL : fail
* others : pointer to new secasvar.
*
* does not modify mbuf. does not free mbuf on error.
*/
static struct secasvar *
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_newsav(struct mbuf *m, const struct sadb_msghdr *mhp,
struct secashead *sah, int *errp, const char *where, int tag)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct secasvar *newsav;
const struct sadb_sa *xsa;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(m != NULL, ("null mbuf"));
IPSEC_ASSERT(mhp != NULL, ("null msghdr"));
IPSEC_ASSERT(mhp->msg != NULL, ("null msg"));
IPSEC_ASSERT(sah != NULL, ("null secashead"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
newsav = malloc(sizeof(struct secasvar), M_IPSEC_SA, M_NOWAIT|M_ZERO);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (newsav == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: No more memory.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
*errp = ENOBUFS;
goto done;
}
switch (mhp->msg->sadb_msg_type) {
case SADB_GETSPI:
newsav->spi = 0;
#ifdef IPSEC_DOSEQCHECK
/* sync sequence number */
if (mhp->msg->sadb_msg_seq == 0)
newsav->seq =
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
(V_acq_seq = (V_acq_seq == ~0 ? 1 : ++V_acq_seq));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
else
#endif
newsav->seq = mhp->msg->sadb_msg_seq;
break;
case SADB_ADD:
/* sanity check */
if (mhp->ext[SADB_EXT_SA] == NULL) {
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
free(newsav, M_IPSEC_SA);
newsav = NULL;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid message is passed.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
*errp = EINVAL;
goto done;
}
xsa = (const struct sadb_sa *)mhp->ext[SADB_EXT_SA];
newsav->spi = xsa->sadb_sa_spi;
newsav->seq = mhp->msg->sadb_msg_seq;
break;
default:
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
free(newsav, M_IPSEC_SA);
newsav = NULL;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
*errp = EINVAL;
goto done;
}
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* copy sav values */
if (mhp->msg->sadb_msg_type != SADB_GETSPI) {
*errp = key_setsaval(newsav, m, mhp);
if (*errp) {
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
free(newsav, M_IPSEC_SA);
newsav = NULL;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
goto done;
}
}
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SECASVAR_LOCK_INIT(newsav);
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* reset created */
newsav->created = time_second;
newsav->pid = mhp->msg->sadb_msg_pid;
/* add to satree */
newsav->sah = sah;
Prevent disappearing SAD entries by implementing MPsafe refcounting. "Why didn't he use SECASVAR_LOCK()/SECASVAR_UNLOCK() macros to synchronize access to the secasvar structure's fields?" one may ask. There were two reasons: 1. refcount(9) is faster then mutex(9) synchronization (one atomic operation instead of two). 2. Those macros are not used now at all, so at some point we may decide to remove them entirely. OK'ed by: gnn MFC after: 2 weeks
2006-05-20 15:35:36 +00:00
sa_initref(newsav);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
newsav->state = SADB_SASTATE_LARVAL;
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
fixed two race conditions when inserting/removing SAs via PFKey, which can both lead to a kernel panic when adding/removing quickly a lot of SAs. Obtained from: NETASQ MFC after: 2w (MFC on 8 before 8.0 release ???)
2009-11-17 16:00:41 +00:00
SAHTREE_LOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
LIST_INSERT_TAIL(&sah->savtree[SADB_SASTATE_LARVAL], newsav,
secasvar, chain);
fixed two race conditions when inserting/removing SAs via PFKey, which can both lead to a kernel panic when adding/removing quickly a lot of SAs. Obtained from: NETASQ MFC after: 2w (MFC on 8 before 8.0 release ???)
2009-11-17 16:00:41 +00:00
SAHTREE_UNLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
done:
KEYDEBUG(KEYDEBUG_IPSEC_STAMP,
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
printf("DP %s from %s:%u return SP:%p\n", __func__,
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
where, tag, newsav));
return newsav;
}
/*
* free() SA variable entry.
*/
static void
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
key_cleansav(struct secasvar *sav)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
plug xform memory leaks: o add missing zeroize op when deleting an SA o don't re-initialize an xform for an SA that already has one Submitted by: Doug Ambrisko <ambrisko@verniernetworks.com> MFC after: 1 day
2003-06-29 23:58:38 +00:00
/*
* Cleanup xform state. Note that zeroize'ing causes the
* keys to be cleared; otherwise we must do it ourself.
*/
if (sav->tdb_xform != NULL) {
sav->tdb_xform->xf_zeroize(sav);
sav->tdb_xform = NULL;
} else {
if (sav->key_auth != NULL)
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
bzero(sav->key_auth->key_data, _KEYLEN(sav->key_auth));
plug xform memory leaks: o add missing zeroize op when deleting an SA o don't re-initialize an xform for an SA that already has one Submitted by: Doug Ambrisko <ambrisko@verniernetworks.com> MFC after: 1 day
2003-06-29 23:58:38 +00:00
if (sav->key_enc != NULL)
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
bzero(sav->key_enc->key_data, _KEYLEN(sav->key_enc));
plug xform memory leaks: o add missing zeroize op when deleting an SA o don't re-initialize an xform for an SA that already has one Submitted by: Doug Ambrisko <ambrisko@verniernetworks.com> MFC after: 1 day
2003-06-29 23:58:38 +00:00
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (sav->key_auth != NULL) {
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
if (sav->key_auth->key_data != NULL)
free(sav->key_auth->key_data, M_IPSEC_MISC);
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
free(sav->key_auth, M_IPSEC_MISC);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
sav->key_auth = NULL;
}
if (sav->key_enc != NULL) {
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
if (sav->key_enc->key_data != NULL)
free(sav->key_enc->key_data, M_IPSEC_MISC);
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
free(sav->key_enc, M_IPSEC_MISC);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
sav->key_enc = NULL;
}
if (sav->sched) {
bzero(sav->sched, sav->schedlen);
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
free(sav->sched, M_IPSEC_MISC);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
sav->sched = NULL;
}
if (sav->replay != NULL) {
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
free(sav->replay, M_IPSEC_MISC);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
sav->replay = NULL;
}
if (sav->lft_c != NULL) {
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
free(sav->lft_c, M_IPSEC_MISC);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
sav->lft_c = NULL;
}
if (sav->lft_h != NULL) {
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
free(sav->lft_h, M_IPSEC_MISC);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
sav->lft_h = NULL;
}
if (sav->lft_s != NULL) {
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
free(sav->lft_s, M_IPSEC_MISC);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
sav->lft_s = NULL;
}
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
/*
* free() SA variable entry.
*/
static void
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_delsav(struct secasvar *sav)
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
{
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(sav != NULL, ("null sav"));
IPSEC_ASSERT(sav->refcnt == 0, ("reference count %u > 0", sav->refcnt));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
/* remove from SA header */
if (__LIST_CHAINED(sav))
LIST_REMOVE(sav, chain);
key_cleansav(sav);
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SECASVAR_LOCK_DESTROY(sav);
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
free(sav, M_IPSEC_SA);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
/*
* search SAD.
* OUT:
* NULL : not found
* others : found, pointer to a SA.
*/
static struct secashead *
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_getsah(struct secasindex *saidx)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct secashead *sah;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_LOCK();
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
LIST_FOREACH(sah, &V_sahtree, chain) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (sah->state == SADB_SASTATE_DEAD)
continue;
if (key_cmpsaidx(&sah->saidx, saidx, CMP_REQID))
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
break;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_UNLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
return sah;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
/*
* check not to be duplicated SPI.
* NOTE: this function is too slow due to searching all SAD.
* OUT:
* NULL : not found
* others : found, pointer to a SA.
*/
static struct secasvar *
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_checkspidup(struct secasindex *saidx, u_int32_t spi)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct secashead *sah;
struct secasvar *sav;
/* check address family */
if (saidx->src.sa.sa_family != saidx->dst.sa.sa_family) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: address family mismatched.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return NULL;
}
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
sav = NULL;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* check all SAD */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_LOCK();
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
LIST_FOREACH(sah, &V_sahtree, chain) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (!key_ismyaddr((struct sockaddr *)&sah->saidx.dst))
continue;
sav = key_getsavbyspi(sah, spi);
if (sav != NULL)
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
break;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_UNLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
return sav;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
/*
* search SAD litmited alive SA, protocol, SPI.
* OUT:
* NULL : not found
* others : found, pointer to a SA.
*/
static struct secasvar *
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_getsavbyspi(struct secashead *sah, u_int32_t spi)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct secasvar *sav;
u_int stateidx, state;
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
sav = NULL;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_LOCK_ASSERT();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* search all status */
for (stateidx = 0;
Merge more of currently non-functional (i.e. resolving to whitespace) macros from p4/vimage branch. Do a better job at enclosing all instantiations of globals scheduled for virtualization in #ifdef VIMAGE_GLOBALS blocks. De-virtualize and mark as const saorder_state_alive and saorder_state_any arrays from ipsec code, given that they are never updated at runtime, so virtualizing them would be pointless. Reviewed by: bz, julian Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-11-26 22:32:07 +00:00
stateidx < _ARRAYLEN(saorder_state_alive);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
stateidx++) {
Merge more of currently non-functional (i.e. resolving to whitespace) macros from p4/vimage branch. Do a better job at enclosing all instantiations of globals scheduled for virtualization in #ifdef VIMAGE_GLOBALS blocks. De-virtualize and mark as const saorder_state_alive and saorder_state_any arrays from ipsec code, given that they are never updated at runtime, so virtualizing them would be pointless. Reviewed by: bz, julian Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-11-26 22:32:07 +00:00
state = saorder_state_alive[stateidx];
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
LIST_FOREACH(sav, &sah->savtree[state], chain) {
/* sanity check */
if (sav->state != state) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: "
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
"invalid sav->state (queue: %d SA: %d)\n",
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
__func__, state, sav->state));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
continue;
}
if (sav->spi == spi)
correct behaviour of key_getsavbyspi broken in rev 1.7; corrects problems with removing specific SPIs Submitted by: Bjoern A. Zeeb
2004-05-03 05:11:40 +00:00
return sav;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
}
correct behaviour of key_getsavbyspi broken in rev 1.7; corrects problems with removing specific SPIs Submitted by: Bjoern A. Zeeb
2004-05-03 05:11:40 +00:00
return NULL;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
/*
* copy SA values from PF_KEY message except *SPI, SEQ, PID, STATE and TYPE*.
* You must update these if need.
* OUT: 0: success.
* !0: failure.
*
* does not modify mbuf. does not free mbuf on error.
*/
static int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_setsaval(struct secasvar *sav, struct mbuf *m,
const struct sadb_msghdr *mhp)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
int error = 0;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(m != NULL, ("null mbuf"));
IPSEC_ASSERT(mhp != NULL, ("null msghdr"));
IPSEC_ASSERT(mhp->msg != NULL, ("null msg"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* initialization */
sav->replay = NULL;
sav->key_auth = NULL;
sav->key_enc = NULL;
sav->sched = NULL;
sav->schedlen = 0;
sav->lft_c = NULL;
sav->lft_h = NULL;
sav->lft_s = NULL;
sav->tdb_xform = NULL; /* transform */
sav->tdb_encalgxform = NULL; /* encoding algorithm */
sav->tdb_authalgxform = NULL; /* authentication algorithm */
sav->tdb_compalgxform = NULL; /* compression algorithm */
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
/* Initialize even if NAT-T not compiled in: */
sav->natt_type = 0;
sav->natt_esp_frag_len = 0;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* SA */
if (mhp->ext[SADB_EXT_SA] != NULL) {
const struct sadb_sa *sa0;
sa0 = (const struct sadb_sa *)mhp->ext[SADB_EXT_SA];
if (mhp->extlen[SADB_EXT_SA] < sizeof(*sa0)) {
error = EINVAL;
goto fail;
}
sav->alg_auth = sa0->sadb_sa_auth;
sav->alg_enc = sa0->sadb_sa_encrypt;
sav->flags = sa0->sadb_sa_flags;
/* replay window */
if ((sa0->sadb_sa_flags & SADB_X_EXT_OLD) == 0) {
sav->replay = (struct secreplay *)
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
malloc(sizeof(struct secreplay)+sa0->sadb_sa_replay, M_IPSEC_MISC, M_NOWAIT|M_ZERO);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (sav->replay == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: No more memory.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = ENOBUFS;
goto fail;
}
if (sa0->sadb_sa_replay != 0)
sav->replay->bitmap = (caddr_t)(sav->replay+1);
sav->replay->wsize = sa0->sadb_sa_replay;
}
}
/* Authentication keys */
if (mhp->ext[SADB_EXT_KEY_AUTH] != NULL) {
const struct sadb_key *key0;
int len;
key0 = (const struct sadb_key *)mhp->ext[SADB_EXT_KEY_AUTH];
len = mhp->extlen[SADB_EXT_KEY_AUTH];
error = 0;
if (len < sizeof(*key0)) {
error = EINVAL;
goto fail;
}
switch (mhp->msg->sadb_msg_satype) {
case SADB_SATYPE_AH:
case SADB_SATYPE_ESP:
Initial import of RFC 2385 (TCP-MD5) digest support. This is the first of two commits; bringing in the kernel support first. This can be enabled by compiling a kernel with options TCP_SIGNATURE and FAST_IPSEC. For the uninitiated, this is a TCP option which provides for a means of authenticating TCP sessions which came into being before IPSEC. It is still relevant today, however, as it is used by many commercial router vendors, particularly with BGP, and as such has become a requirement for interconnect at many major Internet points of presence. Several parts of the TCP and IP headers, including the segment payload, are digested with MD5, including a shared secret. The PF_KEY interface is used to manage the secrets using security associations in the SADB. There is a limitation here in that as there is no way to map a TCP flow per-port back to an SPI without polluting tcpcb or using the SPD; the code to do the latter is unstable at this time. Therefore this code only supports per-host keying granularity. Whilst FAST_IPSEC is mutually exclusive with KAME IPSEC (and thus IPv6), TCP_SIGNATURE applies only to IPv4. For the vast majority of prospective users of this feature, this will not pose any problem. This implementation is output-only; that is, the option is honoured when responding to a host initiating a TCP session, but no effort is made [yet] to authenticate inbound traffic. This is, however, sufficient to interwork with Cisco equipment. Tested with a Cisco 2501 running IOS 12.0(27), and Quagga 0.96.4 with local patches. Patches for tcpdump to validate TCP-MD5 sessions are also available from me upon request. Sponsored by: sentex.net
2004-02-11 04:26:04 +00:00
case SADB_X_SATYPE_TCPSIGNATURE:
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (len == PFKEY_ALIGN8(sizeof(struct sadb_key)) &&
sav->alg_auth != SADB_X_AALG_NULL)
error = EINVAL;
break;
case SADB_X_SATYPE_IPCOMP:
default:
error = EINVAL;
break;
}
if (error) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid key_auth values.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
goto fail;
}
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
sav->key_auth = (struct seckey *)key_dup_keymsg(key0, len,
M_IPSEC_MISC);
if (sav->key_auth == NULL ) {
ipseclog((LOG_DEBUG, "%s: No more memory.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = ENOBUFS;
goto fail;
}
}
/* Encryption key */
if (mhp->ext[SADB_EXT_KEY_ENCRYPT] != NULL) {
const struct sadb_key *key0;
int len;
key0 = (const struct sadb_key *)mhp->ext[SADB_EXT_KEY_ENCRYPT];
len = mhp->extlen[SADB_EXT_KEY_ENCRYPT];
error = 0;
if (len < sizeof(*key0)) {
error = EINVAL;
goto fail;
}
switch (mhp->msg->sadb_msg_satype) {
case SADB_SATYPE_ESP:
if (len == PFKEY_ALIGN8(sizeof(struct sadb_key)) &&
sav->alg_enc != SADB_EALG_NULL) {
error = EINVAL;
break;
}
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
sav->key_enc = (struct seckey *)key_dup_keymsg(key0,
len,
M_IPSEC_MISC);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (sav->key_enc == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: No more memory.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = ENOBUFS;
goto fail;
}
break;
case SADB_X_SATYPE_IPCOMP:
if (len != PFKEY_ALIGN8(sizeof(struct sadb_key)))
error = EINVAL;
sav->key_enc = NULL; /*just in case*/
break;
case SADB_SATYPE_AH:
Initial import of RFC 2385 (TCP-MD5) digest support. This is the first of two commits; bringing in the kernel support first. This can be enabled by compiling a kernel with options TCP_SIGNATURE and FAST_IPSEC. For the uninitiated, this is a TCP option which provides for a means of authenticating TCP sessions which came into being before IPSEC. It is still relevant today, however, as it is used by many commercial router vendors, particularly with BGP, and as such has become a requirement for interconnect at many major Internet points of presence. Several parts of the TCP and IP headers, including the segment payload, are digested with MD5, including a shared secret. The PF_KEY interface is used to manage the secrets using security associations in the SADB. There is a limitation here in that as there is no way to map a TCP flow per-port back to an SPI without polluting tcpcb or using the SPD; the code to do the latter is unstable at this time. Therefore this code only supports per-host keying granularity. Whilst FAST_IPSEC is mutually exclusive with KAME IPSEC (and thus IPv6), TCP_SIGNATURE applies only to IPv4. For the vast majority of prospective users of this feature, this will not pose any problem. This implementation is output-only; that is, the option is honoured when responding to a host initiating a TCP session, but no effort is made [yet] to authenticate inbound traffic. This is, however, sufficient to interwork with Cisco equipment. Tested with a Cisco 2501 running IOS 12.0(27), and Quagga 0.96.4 with local patches. Patches for tcpdump to validate TCP-MD5 sessions are also available from me upon request. Sponsored by: sentex.net
2004-02-11 04:26:04 +00:00
case SADB_X_SATYPE_TCPSIGNATURE:
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
default:
error = EINVAL;
break;
}
if (error) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid key_enc value.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
goto fail;
}
}
/* set iv */
sav->ivlen = 0;
switch (mhp->msg->sadb_msg_satype) {
case SADB_SATYPE_AH:
error = xform_init(sav, XF_AH);
break;
case SADB_SATYPE_ESP:
error = xform_init(sav, XF_ESP);
break;
case SADB_X_SATYPE_IPCOMP:
error = xform_init(sav, XF_IPCOMP);
break;
Initial import of RFC 2385 (TCP-MD5) digest support. This is the first of two commits; bringing in the kernel support first. This can be enabled by compiling a kernel with options TCP_SIGNATURE and FAST_IPSEC. For the uninitiated, this is a TCP option which provides for a means of authenticating TCP sessions which came into being before IPSEC. It is still relevant today, however, as it is used by many commercial router vendors, particularly with BGP, and as such has become a requirement for interconnect at many major Internet points of presence. Several parts of the TCP and IP headers, including the segment payload, are digested with MD5, including a shared secret. The PF_KEY interface is used to manage the secrets using security associations in the SADB. There is a limitation here in that as there is no way to map a TCP flow per-port back to an SPI without polluting tcpcb or using the SPD; the code to do the latter is unstable at this time. Therefore this code only supports per-host keying granularity. Whilst FAST_IPSEC is mutually exclusive with KAME IPSEC (and thus IPv6), TCP_SIGNATURE applies only to IPv4. For the vast majority of prospective users of this feature, this will not pose any problem. This implementation is output-only; that is, the option is honoured when responding to a host initiating a TCP session, but no effort is made [yet] to authenticate inbound traffic. This is, however, sufficient to interwork with Cisco equipment. Tested with a Cisco 2501 running IOS 12.0(27), and Quagga 0.96.4 with local patches. Patches for tcpdump to validate TCP-MD5 sessions are also available from me upon request. Sponsored by: sentex.net
2004-02-11 04:26:04 +00:00
case SADB_X_SATYPE_TCPSIGNATURE:
error = xform_init(sav, XF_TCPSIGNATURE);
break;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
if (error) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: unable to initialize SA type %u.\n",
__func__, mhp->msg->sadb_msg_satype));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
goto fail;
}
/* reset created */
sav->created = time_second;
/* make lifetime for CURRENT */
Fix bugs when allocating and passing information of current lifetime and soft lifetime [1] introduced in rev. 1.21 of key.c. Along with that, fix a related problem in key_debug printing the correct data. While there replace a printf by panic in a sanity check. PR: 120751 Submitted by: Kazuaki ODA (kazuaki aliceblue.jp) [1] MFC after: 5 days
2008-03-02 17:12:28 +00:00
sav->lft_c = malloc(sizeof(struct seclifetime), M_IPSEC_MISC, M_NOWAIT);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (sav->lft_c == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: No more memory.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = ENOBUFS;
goto fail;
}
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
sav->lft_c->allocations = 0;
sav->lft_c->bytes = 0;
sav->lft_c->addtime = time_second;
sav->lft_c->usetime = 0;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* lifetimes for HARD and SOFT */
{
const struct sadb_lifetime *lft0;
lft0 = (struct sadb_lifetime *)mhp->ext[SADB_EXT_LIFETIME_HARD];
if (lft0 != NULL) {
if (mhp->extlen[SADB_EXT_LIFETIME_HARD] < sizeof(*lft0)) {
error = EINVAL;
goto fail;
}
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
sav->lft_h = key_dup_lifemsg(lft0, M_IPSEC_MISC);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (sav->lft_h == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: No more memory.\n",__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = ENOBUFS;
goto fail;
}
/* to be initialize ? */
}
lft0 = (struct sadb_lifetime *)mhp->ext[SADB_EXT_LIFETIME_SOFT];
if (lft0 != NULL) {
if (mhp->extlen[SADB_EXT_LIFETIME_SOFT] < sizeof(*lft0)) {
error = EINVAL;
goto fail;
}
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
sav->lft_s = key_dup_lifemsg(lft0, M_IPSEC_MISC);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (sav->lft_s == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: No more memory.\n",__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = ENOBUFS;
goto fail;
}
/* to be initialize ? */
}
}
return 0;
fail:
/* initialization */
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
key_cleansav(sav);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return error;
}
/*
* validation with a secasvar entry, and set SADB_SATYPE_MATURE.
* OUT: 0: valid
* other: errno
*/
static int
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
key_mature(struct secasvar *sav)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
int error;
/* check SPI value */
switch (sav->sah->saidx.proto) {
case IPPROTO_ESP:
case IPPROTO_AH:
'spi' and the return value of ntohl are unsigned. Remove the extra >=0 check which was always true. Document the special meaning of spi values of 0 and 1-255 with a comment. Found with: Coverity Prevent(tm) CID: 2047
2007-06-16 09:25:23 +00:00
/*
* RFC 4302, 2.4. Security Parameters Index (SPI), SPI values
* 1-255 reserved by IANA for future use,
* 0 for implementation specific, local use.
*/
if (ntohl(sav->spi) <= 255) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: illegal range of SPI %u.\n",
__func__, (u_int32_t)ntohl(sav->spi)));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return EINVAL;
}
break;
}
/* check satype */
switch (sav->sah->saidx.proto) {
case IPPROTO_ESP:
/* check flags */
if ((sav->flags & (SADB_X_EXT_OLD|SADB_X_EXT_DERIV)) ==
(SADB_X_EXT_OLD|SADB_X_EXT_DERIV)) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid flag (derived) "
"given to old-esp.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return EINVAL;
}
error = xform_init(sav, XF_ESP);
break;
case IPPROTO_AH:
/* check flags */
if (sav->flags & SADB_X_EXT_DERIV) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid flag (derived) "
"given to AH SA.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return EINVAL;
}
if (sav->alg_enc != SADB_EALG_NONE) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: protocol and algorithm "
"mismated.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return(EINVAL);
}
error = xform_init(sav, XF_AH);
break;
case IPPROTO_IPCOMP:
if (sav->alg_auth != SADB_AALG_NONE) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: protocol and algorithm "
"mismated.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return(EINVAL);
}
if ((sav->flags & SADB_X_EXT_RAWCPI) == 0
&& ntohl(sav->spi) >= 0x10000) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid cpi for IPComp.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return(EINVAL);
}
error = xform_init(sav, XF_IPCOMP);
break;
Initial import of RFC 2385 (TCP-MD5) digest support. This is the first of two commits; bringing in the kernel support first. This can be enabled by compiling a kernel with options TCP_SIGNATURE and FAST_IPSEC. For the uninitiated, this is a TCP option which provides for a means of authenticating TCP sessions which came into being before IPSEC. It is still relevant today, however, as it is used by many commercial router vendors, particularly with BGP, and as such has become a requirement for interconnect at many major Internet points of presence. Several parts of the TCP and IP headers, including the segment payload, are digested with MD5, including a shared secret. The PF_KEY interface is used to manage the secrets using security associations in the SADB. There is a limitation here in that as there is no way to map a TCP flow per-port back to an SPI without polluting tcpcb or using the SPD; the code to do the latter is unstable at this time. Therefore this code only supports per-host keying granularity. Whilst FAST_IPSEC is mutually exclusive with KAME IPSEC (and thus IPv6), TCP_SIGNATURE applies only to IPv4. For the vast majority of prospective users of this feature, this will not pose any problem. This implementation is output-only; that is, the option is honoured when responding to a host initiating a TCP session, but no effort is made [yet] to authenticate inbound traffic. This is, however, sufficient to interwork with Cisco equipment. Tested with a Cisco 2501 running IOS 12.0(27), and Quagga 0.96.4 with local patches. Patches for tcpdump to validate TCP-MD5 sessions are also available from me upon request. Sponsored by: sentex.net
2004-02-11 04:26:04 +00:00
case IPPROTO_TCP:
if (sav->alg_enc != SADB_EALG_NONE) {
ipseclog((LOG_DEBUG, "%s: protocol and algorithm "
"mismated.\n", __func__));
return(EINVAL);
}
error = xform_init(sav, XF_TCPSIGNATURE);
break;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
default:
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: Invalid satype.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = EPROTONOSUPPORT;
break;
}
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
if (error == 0) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_LOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
key_sa_chgstate(sav, SADB_SASTATE_MATURE);
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_UNLOCK();
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return (error);
}
/*
* subroutine for SADB_GET and SADB_DUMP.
*/
static struct mbuf *
Change the functions to ANSI in those cases where it breaks promotion to int rule. See ISO C Standard: SS6.7.5.3:15. Approved by: kib (mentor) Reviewed by: warner Tested by: silence on -current
2009-02-24 18:09:31 +00:00
key_setdumpsa(struct secasvar *sav, u_int8_t type, u_int8_t satype,
u_int32_t seq, u_int32_t pid)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct mbuf *result = NULL, *tres = NULL, *m;
int i;
int dumporder[] = {
SADB_EXT_SA, SADB_X_EXT_SA2,
SADB_EXT_LIFETIME_HARD, SADB_EXT_LIFETIME_SOFT,
SADB_EXT_LIFETIME_CURRENT, SADB_EXT_ADDRESS_SRC,
SADB_EXT_ADDRESS_DST, SADB_EXT_ADDRESS_PROXY, SADB_EXT_KEY_AUTH,
SADB_EXT_KEY_ENCRYPT, SADB_EXT_IDENTITY_SRC,
SADB_EXT_IDENTITY_DST, SADB_EXT_SENSITIVITY,
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
#ifdef IPSEC_NAT_T
SADB_X_EXT_NAT_T_TYPE,
SADB_X_EXT_NAT_T_SPORT, SADB_X_EXT_NAT_T_DPORT,
SADB_X_EXT_NAT_T_OAI, SADB_X_EXT_NAT_T_OAR,
SADB_X_EXT_NAT_T_FRAG,
#endif
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
};
m = key_setsadbmsg(type, 0, satype, seq, pid, sav->refcnt);
if (m == NULL)
goto fail;
result = m;
for (i = sizeof(dumporder)/sizeof(dumporder[0]) - 1; i >= 0; i--) {
m = NULL;
switch (dumporder[i]) {
case SADB_EXT_SA:
m = key_setsadbsa(sav);
if (!m)
goto fail;
break;
case SADB_X_EXT_SA2:
m = key_setsadbxsa2(sav->sah->saidx.mode,
sav->replay ? sav->replay->count : 0,
sav->sah->saidx.reqid);
if (!m)
goto fail;
break;
case SADB_EXT_ADDRESS_SRC:
m = key_setsadbaddr(SADB_EXT_ADDRESS_SRC,
&sav->sah->saidx.src.sa,
FULLMASK, IPSEC_ULPROTO_ANY);
if (!m)
goto fail;
break;
case SADB_EXT_ADDRESS_DST:
m = key_setsadbaddr(SADB_EXT_ADDRESS_DST,
&sav->sah->saidx.dst.sa,
FULLMASK, IPSEC_ULPROTO_ANY);
if (!m)
goto fail;
break;
case SADB_EXT_KEY_AUTH:
if (!sav->key_auth)
continue;
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
m = key_setkey(sav->key_auth, SADB_EXT_KEY_AUTH);
if (!m)
goto fail;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
break;
case SADB_EXT_KEY_ENCRYPT:
if (!sav->key_enc)
continue;
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
m = key_setkey(sav->key_enc, SADB_EXT_KEY_ENCRYPT);
if (!m)
goto fail;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
break;
case SADB_EXT_LIFETIME_CURRENT:
if (!sav->lft_c)
continue;
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
m = key_setlifetime(sav->lft_c,
SADB_EXT_LIFETIME_CURRENT);
if (!m)
goto fail;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
break;
case SADB_EXT_LIFETIME_HARD:
if (!sav->lft_h)
continue;
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
m = key_setlifetime(sav->lft_h,
SADB_EXT_LIFETIME_HARD);
if (!m)
goto fail;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
break;
case SADB_EXT_LIFETIME_SOFT:
if (!sav->lft_s)
continue;
Fix a bug that when getting/dumping the soft lifetime we reported the hard lifetime instead. MFC after: 3 days
2008-03-24 15:01:20 +00:00
m = key_setlifetime(sav->lft_s,
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
SADB_EXT_LIFETIME_SOFT);
if (!m)
goto fail;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
break;
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
#ifdef IPSEC_NAT_T
case SADB_X_EXT_NAT_T_TYPE:
m = key_setsadbxtype(sav->natt_type);
if (!m)
goto fail;
break;
case SADB_X_EXT_NAT_T_DPORT:
m = key_setsadbxport(
KEY_PORTFROMSADDR(&sav->sah->saidx.dst),
SADB_X_EXT_NAT_T_DPORT);
if (!m)
goto fail;
break;
case SADB_X_EXT_NAT_T_SPORT:
m = key_setsadbxport(
KEY_PORTFROMSADDR(&sav->sah->saidx.src),
SADB_X_EXT_NAT_T_SPORT);
if (!m)
goto fail;
break;
case SADB_X_EXT_NAT_T_OAI:
case SADB_X_EXT_NAT_T_OAR:
case SADB_X_EXT_NAT_T_FRAG:
/* We do not (yet) support those. */
continue;
#endif
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
case SADB_EXT_ADDRESS_PROXY:
case SADB_EXT_IDENTITY_SRC:
case SADB_EXT_IDENTITY_DST:
/* XXX: should we brought from SPD ? */
case SADB_EXT_SENSITIVITY:
default:
continue;
}
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
if (!m)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
goto fail;
if (tres)
m_cat(m, tres);
tres = m;
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
m_cat(result, tres);
if (result->m_len < sizeof(struct sadb_msg)) {
result = m_pullup(result, sizeof(struct sadb_msg));
if (result == NULL)
goto fail;
}
result->m_pkthdr.len = 0;
for (m = result; m; m = m->m_next)
result->m_pkthdr.len += m->m_len;
mtod(result, struct sadb_msg *)->sadb_msg_len =
PFKEY_UNIT64(result->m_pkthdr.len);
return result;
fail:
m_freem(result);
m_freem(tres);
return NULL;
}
/*
* set data into sadb_msg.
*/
static struct mbuf *
Change the functions to ANSI in those cases where it breaks promotion to int rule. See ISO C Standard: SS6.7.5.3:15. Approved by: kib (mentor) Reviewed by: warner Tested by: silence on -current
2009-02-24 18:09:31 +00:00
key_setsadbmsg(u_int8_t type, u_int16_t tlen, u_int8_t satype, u_int32_t seq,
pid_t pid, u_int16_t reserved)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct mbuf *m;
struct sadb_msg *p;
int len;
len = PFKEY_ALIGN8(sizeof(struct sadb_msg));
if (len > MCLBYTES)
return NULL;
Mechanically substitute flags from historic mbuf allocator with malloc(9) flags within sys. Exceptions: - sys/contrib not touched - sys/mbuf.h edited manually
2012-12-05 08:04:20 +00:00
MGETHDR(m, M_NOWAIT, MT_DATA);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (m && len > MHLEN) {
In order to reduce use of M_EXT outside of the mbuf allocator and socket-buffer implementations, introduce a return value for MCLGET() (and m_cljget() that underlies it) to allow the caller to avoid testing M_EXT itself. Update all callers to use the return value. With this change, very few network device drivers remain aware of M_EXT; the primary exceptions lie in mbuf-chain pretty printers for debugging, and in a few cases, custom mbuf and cluster allocation implementations. NB: This is a difficult-to-test change as it touches many drivers for which I don't have physical devices. Instead we've gone for intensive review, but further post-commit review would definitely be appreciated to spot errors where changes could not easily be made mechanically, but were largely mechanical in nature. Differential Revision: https://reviews.freebsd.org/D1440 Reviewed by: adrian, bz, gnn Sponsored by: EMC / Isilon Storage Division
2015-01-06 12:59:37 +00:00
if (!(MCLGET(m, M_NOWAIT))) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
m_freem(m);
m = NULL;
}
}
if (!m)
return NULL;
m->m_pkthdr.len = m->m_len = len;
m->m_next = NULL;
p = mtod(m, struct sadb_msg *);
bzero(p, len);
p->sadb_msg_version = PF_KEY_V2;
p->sadb_msg_type = type;
p->sadb_msg_errno = 0;
p->sadb_msg_satype = satype;
p->sadb_msg_len = PFKEY_UNIT64(tlen);
p->sadb_msg_reserved = reserved;
p->sadb_msg_seq = seq;
p->sadb_msg_pid = (u_int32_t)pid;
return m;
}
/*
* copy secasvar data into sadb_address.
*/
static struct mbuf *
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_setsadbsa(struct secasvar *sav)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct mbuf *m;
struct sadb_sa *p;
int len;
len = PFKEY_ALIGN8(sizeof(struct sadb_sa));
Use m_get2() + m_align() instead of hand made key_alloc_mbuf(). Code examination shows, that although key_alloc_mbuf() could return chains, the callers never use chains, so m_get2() should suffice. Sponsored by: Nginx, Inc.
2013-03-15 10:20:15 +00:00
m = m_get2(len, M_NOWAIT, MT_DATA, 0);
if (m == NULL)
return (NULL);
m_align(m, len);
m->m_len = len;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
p = mtod(m, struct sadb_sa *);
bzero(p, len);
p->sadb_sa_len = PFKEY_UNIT64(len);
p->sadb_sa_exttype = SADB_EXT_SA;
p->sadb_sa_spi = sav->spi;
p->sadb_sa_replay = (sav->replay != NULL ? sav->replay->wsize : 0);
p->sadb_sa_state = sav->state;
p->sadb_sa_auth = sav->alg_auth;
p->sadb_sa_encrypt = sav->alg_enc;
p->sadb_sa_flags = sav->flags;
return m;
}
/*
* set data into sadb_address.
*/
static struct mbuf *
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_setsadbaddr(u_int16_t exttype, const struct sockaddr *saddr,
u_int8_t prefixlen, u_int16_t ul_proto)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct mbuf *m;
struct sadb_address *p;
size_t len;
len = PFKEY_ALIGN8(sizeof(struct sadb_address)) +
PFKEY_ALIGN8(saddr->sa_len);
Use m_get2() + m_align() instead of hand made key_alloc_mbuf(). Code examination shows, that although key_alloc_mbuf() could return chains, the callers never use chains, so m_get2() should suffice. Sponsored by: Nginx, Inc.
2013-03-15 10:20:15 +00:00
m = m_get2(len, M_NOWAIT, MT_DATA, 0);
if (m == NULL)
return (NULL);
m_align(m, len);
m->m_len = len;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
p = mtod(m, struct sadb_address *);
bzero(p, len);
p->sadb_address_len = PFKEY_UNIT64(len);
p->sadb_address_exttype = exttype;
p->sadb_address_proto = ul_proto;
if (prefixlen == FULLMASK) {
switch (saddr->sa_family) {
case AF_INET:
prefixlen = sizeof(struct in_addr) << 3;
break;
case AF_INET6:
prefixlen = sizeof(struct in6_addr) << 3;
break;
default:
; /*XXX*/
}
}
p->sadb_address_prefixlen = prefixlen;
p->sadb_address_reserved = 0;
bcopy(saddr,
mtod(m, caddr_t) + PFKEY_ALIGN8(sizeof(struct sadb_address)),
saddr->sa_len);
return m;
}
/*
* set data into sadb_x_sa2.
*/
static struct mbuf *
Change the functions to ANSI in those cases where it breaks promotion to int rule. See ISO C Standard: SS6.7.5.3:15. Approved by: kib (mentor) Reviewed by: warner Tested by: silence on -current
2009-02-24 18:09:31 +00:00
key_setsadbxsa2(u_int8_t mode, u_int32_t seq, u_int32_t reqid)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct mbuf *m;
struct sadb_x_sa2 *p;
size_t len;
len = PFKEY_ALIGN8(sizeof(struct sadb_x_sa2));
Use m_get2() + m_align() instead of hand made key_alloc_mbuf(). Code examination shows, that although key_alloc_mbuf() could return chains, the callers never use chains, so m_get2() should suffice. Sponsored by: Nginx, Inc.
2013-03-15 10:20:15 +00:00
m = m_get2(len, M_NOWAIT, MT_DATA, 0);
if (m == NULL)
return (NULL);
m_align(m, len);
m->m_len = len;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
p = mtod(m, struct sadb_x_sa2 *);
bzero(p, len);
p->sadb_x_sa2_len = PFKEY_UNIT64(len);
p->sadb_x_sa2_exttype = SADB_X_EXT_SA2;
p->sadb_x_sa2_mode = mode;
p->sadb_x_sa2_reserved1 = 0;
p->sadb_x_sa2_reserved2 = 0;
p->sadb_x_sa2_sequence = seq;
p->sadb_x_sa2_reqid = reqid;
return m;
}
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
#ifdef IPSEC_NAT_T
/*
* Set a type in sadb_x_nat_t_type.
*/
static struct mbuf *
key_setsadbxtype(u_int16_t type)
{
struct mbuf *m;
size_t len;
struct sadb_x_nat_t_type *p;
len = PFKEY_ALIGN8(sizeof(struct sadb_x_nat_t_type));
Use m_get2() + m_align() instead of hand made key_alloc_mbuf(). Code examination shows, that although key_alloc_mbuf() could return chains, the callers never use chains, so m_get2() should suffice. Sponsored by: Nginx, Inc.
2013-03-15 10:20:15 +00:00
m = m_get2(len, M_NOWAIT, MT_DATA, 0);
if (m == NULL)
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
return (NULL);
Use m_get2() + m_align() instead of hand made key_alloc_mbuf(). Code examination shows, that although key_alloc_mbuf() could return chains, the callers never use chains, so m_get2() should suffice. Sponsored by: Nginx, Inc.
2013-03-15 10:20:15 +00:00
m_align(m, len);
m->m_len = len;
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
p = mtod(m, struct sadb_x_nat_t_type *);
bzero(p, len);
p->sadb_x_nat_t_type_len = PFKEY_UNIT64(len);
p->sadb_x_nat_t_type_exttype = SADB_X_EXT_NAT_T_TYPE;
p->sadb_x_nat_t_type_type = type;
return (m);
}
/*
* Set a port in sadb_x_nat_t_port.
* In contrast to default RFC 2367 behaviour, port is in network byte order.
*/
static struct mbuf *
key_setsadbxport(u_int16_t port, u_int16_t type)
{
struct mbuf *m;
size_t len;
struct sadb_x_nat_t_port *p;
len = PFKEY_ALIGN8(sizeof(struct sadb_x_nat_t_port));
Use m_get2() + m_align() instead of hand made key_alloc_mbuf(). Code examination shows, that although key_alloc_mbuf() could return chains, the callers never use chains, so m_get2() should suffice. Sponsored by: Nginx, Inc.
2013-03-15 10:20:15 +00:00
m = m_get2(len, M_NOWAIT, MT_DATA, 0);
if (m == NULL)
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
return (NULL);
Use m_get2() + m_align() instead of hand made key_alloc_mbuf(). Code examination shows, that although key_alloc_mbuf() could return chains, the callers never use chains, so m_get2() should suffice. Sponsored by: Nginx, Inc.
2013-03-15 10:20:15 +00:00
m_align(m, len);
m->m_len = len;
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
p = mtod(m, struct sadb_x_nat_t_port *);
bzero(p, len);
p->sadb_x_nat_t_port_len = PFKEY_UNIT64(len);
p->sadb_x_nat_t_port_exttype = type;
p->sadb_x_nat_t_port_port = port;
return (m);
}
/*
* Get port from sockaddr. Port is in network byte order.
*/
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
u_int16_t
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
key_portfromsaddr(struct sockaddr *sa)
{
switch (sa->sa_family) {
#ifdef INET
case AF_INET:
return ((struct sockaddr_in *)sa)->sin_port;
#endif
#ifdef INET6
case AF_INET6:
return ((struct sockaddr_in6 *)sa)->sin6_port;
#endif
}
KEYDEBUG(KEYDEBUG_IPSEC_STAMP,
printf("DP %s unexpected address family %d\n",
__func__, sa->sa_family));
return (0);
}
#endif /* IPSEC_NAT_T */
/*
* Set port in struct sockaddr. Port is in network byte order.
*/
static void
key_porttosaddr(struct sockaddr *sa, u_int16_t port)
{
switch (sa->sa_family) {
#ifdef INET
case AF_INET:
((struct sockaddr_in *)sa)->sin_port = port;
break;
#endif
#ifdef INET6
case AF_INET6:
((struct sockaddr_in6 *)sa)->sin6_port = port;
break;
#endif
default:
ipseclog((LOG_DEBUG, "%s: unexpected address family %d.\n",
__func__, sa->sa_family));
break;
}
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/*
* set data into sadb_x_policy
*/
static struct mbuf *
Change the functions to ANSI in those cases where it breaks promotion to int rule. See ISO C Standard: SS6.7.5.3:15. Approved by: kib (mentor) Reviewed by: warner Tested by: silence on -current
2009-02-24 18:09:31 +00:00
key_setsadbxpolicy(u_int16_t type, u_int8_t dir, u_int32_t id)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct mbuf *m;
struct sadb_x_policy *p;
size_t len;
len = PFKEY_ALIGN8(sizeof(struct sadb_x_policy));
Use m_get2() + m_align() instead of hand made key_alloc_mbuf(). Code examination shows, that although key_alloc_mbuf() could return chains, the callers never use chains, so m_get2() should suffice. Sponsored by: Nginx, Inc.
2013-03-15 10:20:15 +00:00
m = m_get2(len, M_NOWAIT, MT_DATA, 0);
if (m == NULL)
return (NULL);
m_align(m, len);
m->m_len = len;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
p = mtod(m, struct sadb_x_policy *);
bzero(p, len);
p->sadb_x_policy_len = PFKEY_UNIT64(len);
p->sadb_x_policy_exttype = SADB_X_EXT_POLICY;
p->sadb_x_policy_type = type;
p->sadb_x_policy_dir = dir;
p->sadb_x_policy_id = id;
return m;
}
/* %%% utilities */
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
/* Take a key message (sadb_key) from the socket and turn it into one
* of the kernel's key structures (seckey).
*
* IN: pointer to the src
* OUT: NULL no more memory
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
*/
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
struct seckey *
key_dup_keymsg(const struct sadb_key *src, u_int len,
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
struct malloc_type *type)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
struct seckey *dst;
dst = (struct seckey *)malloc(sizeof(struct seckey), type, M_NOWAIT);
if (dst != NULL) {
dst->bits = src->sadb_key_bits;
dst->key_data = (char *)malloc(len, type, M_NOWAIT);
if (dst->key_data != NULL) {
bcopy((const char *)src + sizeof(struct sadb_key),
dst->key_data, len);
} else {
ipseclog((LOG_DEBUG, "%s: No more memory.\n",
__func__));
free(dst, type);
dst = NULL;
}
} else {
ipseclog((LOG_DEBUG, "%s: No more memory.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
}
return dst;
}
/* Take a lifetime message (sadb_lifetime) passed in on a socket and
* turn it into one of the kernel's lifetime structures (seclifetime).
*
* IN: pointer to the destination, source and malloc type
* OUT: NULL, no more memory
*/
static struct seclifetime *
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_dup_lifemsg(const struct sadb_lifetime *src, struct malloc_type *type)
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
{
struct seclifetime *dst = NULL;
dst = (struct seclifetime *)malloc(sizeof(struct seclifetime),
type, M_NOWAIT);
if (dst == NULL) {
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
/* XXX counter */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: No more memory.\n", __func__));
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
} else {
dst->allocations = src->sadb_lifetime_allocations;
dst->bytes = src->sadb_lifetime_bytes;
dst->addtime = src->sadb_lifetime_addtime;
dst->usetime = src->sadb_lifetime_usetime;
}
return dst;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
/* compare my own address
* OUT: 1: true, i.e. my address.
* 0: false
*/
int
Use in_localip() instead of handmade implementation. MFC after: 1 week Sponsored by: Yandex LLC
2014-10-31 12:19:22 +00:00
key_ismyaddr(struct sockaddr *sa)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(sa != NULL, ("null sockaddr"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
switch (sa->sa_family) {
#ifdef INET
case AF_INET:
Use in_localip() instead of handmade implementation. MFC after: 1 week Sponsored by: Yandex LLC
2014-10-31 12:19:22 +00:00
return (in_localip(satosin(sa)->sin_addr));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
#endif
#ifdef INET6
case AF_INET6:
return key_ismyaddr6((struct sockaddr_in6 *)sa);
#endif
}
return 0;
}
#ifdef INET6
/*
* compare my own address for IPv6.
* 1: ours
* 0: other
*/
static int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_ismyaddr6(struct sockaddr_in6 *sin6)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
Fix handling of scoped IPv6 addresses in IPSec code. * in ipsec_encap() embed scope zone ids into link-local addresses in the new IPv6 header, this helps ip6_output() disambiguate the scope; * teach key_ismyaddr6() use in6_localip(). in6_localip() is less strict than key_sockaddrcmp(). It doesn't compare all fileds of struct sockaddr_in6, but it is faster and it should be safe, because all SA's data was checked for correctness. Also, since IPv6 link-local addresses in the &V_in6_ifaddrhead are stored in kernel-internal form, we need to embed scope zone id from SA into the address before calling in6_localip. * in ipsec_common_input() take scope zone id embedded in the address and use it to initialize sin6_scope_id, then use this sockaddr structure to lookup SA, because we keep addresses in the SADB without embedded scope zone id. Differential Revision: https://reviews.freebsd.org/D2304 Reviewed by: gnn Sponsored by: Yandex LLC
2015-04-18 16:46:31 +00:00
struct in6_addr in6;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Fix handling of scoped IPv6 addresses in IPSec code. * in ipsec_encap() embed scope zone ids into link-local addresses in the new IPv6 header, this helps ip6_output() disambiguate the scope; * teach key_ismyaddr6() use in6_localip(). in6_localip() is less strict than key_sockaddrcmp(). It doesn't compare all fileds of struct sockaddr_in6, but it is faster and it should be safe, because all SA's data was checked for correctness. Also, since IPv6 link-local addresses in the &V_in6_ifaddrhead are stored in kernel-internal form, we need to embed scope zone id from SA into the address before calling in6_localip. * in ipsec_common_input() take scope zone id embedded in the address and use it to initialize sin6_scope_id, then use this sockaddr structure to lookup SA, because we keep addresses in the SADB without embedded scope zone id. Differential Revision: https://reviews.freebsd.org/D2304 Reviewed by: gnn Sponsored by: Yandex LLC
2015-04-18 16:46:31 +00:00
if (!IN6_IS_SCOPE_LINKLOCAL(&sin6->sin6_addr))
return (in6_localip(&sin6->sin6_addr));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Fix handling of scoped IPv6 addresses in IPSec code. * in ipsec_encap() embed scope zone ids into link-local addresses in the new IPv6 header, this helps ip6_output() disambiguate the scope; * teach key_ismyaddr6() use in6_localip(). in6_localip() is less strict than key_sockaddrcmp(). It doesn't compare all fileds of struct sockaddr_in6, but it is faster and it should be safe, because all SA's data was checked for correctness. Also, since IPv6 link-local addresses in the &V_in6_ifaddrhead are stored in kernel-internal form, we need to embed scope zone id from SA into the address before calling in6_localip. * in ipsec_common_input() take scope zone id embedded in the address and use it to initialize sin6_scope_id, then use this sockaddr structure to lookup SA, because we keep addresses in the SADB without embedded scope zone id. Differential Revision: https://reviews.freebsd.org/D2304 Reviewed by: gnn Sponsored by: Yandex LLC
2015-04-18 16:46:31 +00:00
/* Convert address into kernel-internal form */
in6 = sin6->sin6_addr;
in6.s6_addr16[1] = htons(sin6->sin6_scope_id & 0xffff);
return (in6_localip(&in6));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
#endif /*INET6*/
/*
* compare two secasindex structure.
* flag can specify to compare 2 saidxes.
* compare two secasindex structure without both mode and reqid.
* don't compare port.
* IN:
* saidx0: source, it can be in SAD.
* saidx1: object.
* OUT:
* 1 : equal
* 0 : not equal
*/
static int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_cmpsaidx(const struct secasindex *saidx0, const struct secasindex *saidx1,
int flag)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
int chkport = 0;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* sanity */
if (saidx0 == NULL && saidx1 == NULL)
return 1;
if (saidx0 == NULL || saidx1 == NULL)
return 0;
if (saidx0->proto != saidx1->proto)
return 0;
if (flag == CMP_EXACTLY) {
if (saidx0->mode != saidx1->mode)
return 0;
if (saidx0->reqid != saidx1->reqid)
return 0;
if (bcmp(&saidx0->src, &saidx1->src, saidx0->src.sa.sa_len) != 0 ||
bcmp(&saidx0->dst, &saidx1->dst, saidx0->dst.sa.sa_len) != 0)
return 0;
} else {
/* CMP_MODE_REQID, CMP_REQID, CMP_HEAD */
if (flag == CMP_MODE_REQID
||flag == CMP_REQID) {
/*
* If reqid of SPD is non-zero, unique SA is required.
* The result must be of same reqid in this case.
*/
if (saidx1->reqid != 0 && saidx0->reqid != saidx1->reqid)
return 0;
}
if (flag == CMP_MODE_REQID) {
if (saidx0->mode != IPSEC_MODE_ANY
&& saidx0->mode != saidx1->mode)
return 0;
}
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
#ifdef IPSEC_NAT_T
/*
* If NAT-T is enabled, check ports for tunnel mode.
* Do not check ports if they are set to zero in the SPD.
In NAT-T transport mode, allow a client to open a new connection just after closing another. It worked only in tunnel mode before. Submitted by: Andreas Longwitz <longwitz@incore.de> MFC after: 1M
2012-09-12 12:14:50 +00:00
* Also do not do it for native transport mode, as there
* is no port information available in the SP.
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
*/
In NAT-T transport mode, allow a client to open a new connection just after closing another. It worked only in tunnel mode before. Submitted by: Andreas Longwitz <longwitz@incore.de> MFC after: 1M
2012-09-12 12:14:50 +00:00
if ((saidx1->mode == IPSEC_MODE_TUNNEL ||
(saidx1->mode == IPSEC_MODE_TRANSPORT &&
saidx1->proto == IPPROTO_ESP)) &&
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
saidx1->src.sa.sa_family == AF_INET &&
saidx1->dst.sa.sa_family == AF_INET &&
((const struct sockaddr_in *)(&saidx1->src))->sin_port &&
((const struct sockaddr_in *)(&saidx1->dst))->sin_port)
chkport = 1;
#endif /* IPSEC_NAT_T */
if (key_sockaddrcmp(&saidx0->src.sa, &saidx1->src.sa, chkport) != 0) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return 0;
}
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
if (key_sockaddrcmp(&saidx0->dst.sa, &saidx1->dst.sa, chkport) != 0) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return 0;
}
}
return 1;
}
/*
* compare two secindex structure exactly.
* IN:
* spidx0: source, it is often in SPD.
* spidx1: object, it is often from PFKEY message.
* OUT:
* 1 : equal
* 0 : not equal
*/
static int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_cmpspidx_exactly(struct secpolicyindex *spidx0,
struct secpolicyindex *spidx1)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
/* sanity */
if (spidx0 == NULL && spidx1 == NULL)
return 1;
if (spidx0 == NULL || spidx1 == NULL)
return 0;
if (spidx0->prefs != spidx1->prefs
|| spidx0->prefd != spidx1->prefd
|| spidx0->ul_proto != spidx1->ul_proto)
return 0;
return key_sockaddrcmp(&spidx0->src.sa, &spidx1->src.sa, 1) == 0 &&
key_sockaddrcmp(&spidx0->dst.sa, &spidx1->dst.sa, 1) == 0;
}
/*
* compare two secindex structure with mask.
* IN:
* spidx0: source, it is often in SPD.
* spidx1: object, it is often from IP header.
* OUT:
* 1 : equal
* 0 : not equal
*/
static int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_cmpspidx_withmask(struct secpolicyindex *spidx0,
struct secpolicyindex *spidx1)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
/* sanity */
if (spidx0 == NULL && spidx1 == NULL)
return 1;
if (spidx0 == NULL || spidx1 == NULL)
return 0;
if (spidx0->src.sa.sa_family != spidx1->src.sa.sa_family ||
spidx0->dst.sa.sa_family != spidx1->dst.sa.sa_family ||
spidx0->src.sa.sa_len != spidx1->src.sa.sa_len ||
spidx0->dst.sa.sa_len != spidx1->dst.sa.sa_len)
return 0;
/* if spidx.ul_proto == IPSEC_ULPROTO_ANY, ignore. */
if (spidx0->ul_proto != (u_int16_t)IPSEC_ULPROTO_ANY
&& spidx0->ul_proto != spidx1->ul_proto)
return 0;
switch (spidx0->src.sa.sa_family) {
case AF_INET:
if (spidx0->src.sin.sin_port != IPSEC_PORT_ANY
&& spidx0->src.sin.sin_port != spidx1->src.sin.sin_port)
return 0;
if (!key_bbcmp(&spidx0->src.sin.sin_addr,
&spidx1->src.sin.sin_addr, spidx0->prefs))
return 0;
break;
case AF_INET6:
if (spidx0->src.sin6.sin6_port != IPSEC_PORT_ANY
&& spidx0->src.sin6.sin6_port != spidx1->src.sin6.sin6_port)
return 0;
/*
* scope_id check. if sin6_scope_id is 0, we regard it
* as a wildcard scope, which matches any scope zone ID.
*/
if (spidx0->src.sin6.sin6_scope_id &&
spidx1->src.sin6.sin6_scope_id &&
spidx0->src.sin6.sin6_scope_id != spidx1->src.sin6.sin6_scope_id)
return 0;
if (!key_bbcmp(&spidx0->src.sin6.sin6_addr,
&spidx1->src.sin6.sin6_addr, spidx0->prefs))
return 0;
break;
default:
/* XXX */
if (bcmp(&spidx0->src, &spidx1->src, spidx0->src.sa.sa_len) != 0)
return 0;
break;
}
switch (spidx0->dst.sa.sa_family) {
case AF_INET:
if (spidx0->dst.sin.sin_port != IPSEC_PORT_ANY
&& spidx0->dst.sin.sin_port != spidx1->dst.sin.sin_port)
return 0;
if (!key_bbcmp(&spidx0->dst.sin.sin_addr,
&spidx1->dst.sin.sin_addr, spidx0->prefd))
return 0;
break;
case AF_INET6:
if (spidx0->dst.sin6.sin6_port != IPSEC_PORT_ANY
&& spidx0->dst.sin6.sin6_port != spidx1->dst.sin6.sin6_port)
return 0;
/*
* scope_id check. if sin6_scope_id is 0, we regard it
* as a wildcard scope, which matches any scope zone ID.
*/
Fix a paste-o in key_cmpspidx_withmask(). PR: misc/67013 Submitted by: Zhenmin <zli4@cs.uiuc.edu>
2004-06-22 17:17:44 +00:00
if (spidx0->dst.sin6.sin6_scope_id &&
spidx1->dst.sin6.sin6_scope_id &&
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
spidx0->dst.sin6.sin6_scope_id != spidx1->dst.sin6.sin6_scope_id)
return 0;
if (!key_bbcmp(&spidx0->dst.sin6.sin6_addr,
&spidx1->dst.sin6.sin6_addr, spidx0->prefd))
return 0;
break;
default:
/* XXX */
if (bcmp(&spidx0->dst, &spidx1->dst, spidx0->dst.sa.sa_len) != 0)
return 0;
break;
}
/* XXX Do we check other field ? e.g. flowinfo */
return 1;
}
/* returns 0 on match */
static int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_sockaddrcmp(const struct sockaddr *sa1, const struct sockaddr *sa2,
int port)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
#ifdef satosin
#undef satosin
#endif
#define satosin(s) ((const struct sockaddr_in *)s)
#ifdef satosin6
#undef satosin6
#endif
#define satosin6(s) ((const struct sockaddr_in6 *)s)
if (sa1->sa_family != sa2->sa_family || sa1->sa_len != sa2->sa_len)
return 1;
switch (sa1->sa_family) {
case AF_INET:
if (sa1->sa_len != sizeof(struct sockaddr_in))
return 1;
if (satosin(sa1)->sin_addr.s_addr !=
satosin(sa2)->sin_addr.s_addr) {
return 1;
}
if (port && satosin(sa1)->sin_port != satosin(sa2)->sin_port)
return 1;
break;
case AF_INET6:
if (sa1->sa_len != sizeof(struct sockaddr_in6))
return 1; /*EINVAL*/
if (satosin6(sa1)->sin6_scope_id !=
satosin6(sa2)->sin6_scope_id) {
return 1;
}
if (!IN6_ARE_ADDR_EQUAL(&satosin6(sa1)->sin6_addr,
&satosin6(sa2)->sin6_addr)) {
return 1;
}
if (port &&
satosin6(sa1)->sin6_port != satosin6(sa2)->sin6_port) {
return 1;
}
Add missing break; so when comparing AF_INET6 addresses, scope and ports we do not run into the default case and return 'no match' instead of 'match'.
2007-05-29 22:18:44 +00:00
break;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
default:
if (bcmp(sa1, sa2, sa1->sa_len) != 0)
return 1;
break;
}
return 0;
#undef satosin
#undef satosin6
}
/*
* compare two buffers with mask.
* IN:
* addr1: source
* addr2: object
* bits: Number of bits to compare
* OUT:
* 1 : equal
* 0 : not equal
*/
static int
key_bbcmp(const void *a1, const void *a2, u_int bits)
{
const unsigned char *p1 = a1;
const unsigned char *p2 = a2;
/* XXX: This could be considerably faster if we compare a word
* at a time, but it is complicated on LSB Endian machines */
/* Handle null pointers */
if (p1 == NULL || p2 == NULL)
return (p1 == p2);
while (bits >= 8) {
if (*p1++ != *p2++)
return 0;
bits -= 8;
}
if (bits > 0) {
u_int8_t mask = ~((1<<(8-bits))-1);
if ((*p1 & mask) != (*p2 & mask))
return 0;
}
return 1; /* Match! */
}
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
static void
key_flush_spd(time_t now)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
SPTREE_RLOCK_TRACKER;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
struct secpolicy *sp;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
u_int dir;
/* SPD */
for (dir = 0; dir < IPSEC_DIR_MAX; dir++) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
restart:
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
SPTREE_RLOCK();
TAILQ_FOREACH(sp, &V_sptree[dir], chain) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (sp->lifetime == 0 && sp->validtime == 0)
continue;
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
if ((sp->lifetime &&
now - sp->created > sp->lifetime) ||
(sp->validtime &&
now - sp->lastused > sp->validtime)) {
Fix possible memory leak and several races in the IPsec policy management code. Resurrect the state field in the struct secpolicy, it has IPSEC_SPSTATE_ALIVE value when security policy linked in the chain, and IPSEC_SPSTATE_DEAD value in all other cases. This field protects from trying to unlink one security policy several times from the different threads. Take additional reference in the key_flush_spd() to be sure that policy won't be freed from the different thread while we are sending SPDEXPIRE message. Add KEY_FREESP() call to the key_unlink() to release additional reference that we take when use key_getsp*() functions. Differential Revision: https://reviews.freebsd.org/D1914 Tested by: Emeric POUPON <emeric.poupon at stormshield dot eu> Reviewed by: hrs Sponsored by: Yandex LLC
2015-02-24 10:35:07 +00:00
SP_ADDREF(sp);
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
SPTREE_RUNLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
key_spdexpire(sp);
Fix possible memory leak and several races in the IPsec policy management code. Resurrect the state field in the struct secpolicy, it has IPSEC_SPSTATE_ALIVE value when security policy linked in the chain, and IPSEC_SPSTATE_DEAD value in all other cases. This field protects from trying to unlink one security policy several times from the different threads. Take additional reference in the key_flush_spd() to be sure that policy won't be freed from the different thread while we are sending SPDEXPIRE message. Add KEY_FREESP() call to the key_unlink() to release additional reference that we take when use key_getsp*() functions. Differential Revision: https://reviews.freebsd.org/D1914 Tested by: Emeric POUPON <emeric.poupon at stormshield dot eu> Reviewed by: hrs Sponsored by: Yandex LLC
2015-02-24 10:35:07 +00:00
key_unlink(sp);
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
KEY_FREESP(&sp);
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
goto restart;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
}
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
SPTREE_RUNLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
static void
key_flush_sad(time_t now)
{
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
struct secashead *sah, *nextsah;
struct secasvar *sav, *nextsav;
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
/* SAD */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_LOCK();
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
LIST_FOREACH_SAFE(sah, &V_sahtree, chain, nextsah) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* if sah has been dead, then delete it and process next sah. */
if (sah->state == SADB_SASTATE_DEAD) {
key_delsah(sah);
continue;
}
/* if LARVAL entry doesn't become MATURE, delete it. */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
LIST_FOREACH_SAFE(sav, &sah->savtree[SADB_SASTATE_LARVAL], chain, nextsav) {
Fixed style for some comments Approved by: gnn(mentor)
2009-03-19 15:44:13 +00:00
/* Need to also check refcnt for a larval SA ??? */
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
if (now - sav->created > V_key_larval_lifetime)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
KEY_FREESAV(&sav);
}
/*
* check MATURE entry to start to send expire message
* whether or not.
*/
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
LIST_FOREACH_SAFE(sav, &sah->savtree[SADB_SASTATE_MATURE], chain, nextsav) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* we don't need to check. */
if (sav->lft_s == NULL)
continue;
/* sanity check */
if (sav->lft_c == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG,"%s: there is no CURRENT "
"time, why?\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
continue;
}
/*
Teach key_expire() send SADB_EXPIRE message with the SADB_EXT_LIFETIME_HARD extension header type. The key_flush_sad() now will send SADB_EXPIRE message when HARD lifetime expires. This is required by RFC 2367 and some keying daemons rely on these messages. HARD lifetime messages have precedence over SOFT lifetime messages, so now they will be checked first. Also now SADB_EXPIRE messages will be send even the SA has not been used, because keying daemons might want to rekey such SA. PR: 200282, 200283 Submitted by: Tobias Brunner <tobias at strongswan dot org> MFC after: 2 weeks
2015-05-19 08:30:04 +00:00
* RFC 2367:
* HARD lifetimes MUST take precedence over SOFT
* lifetimes, meaning if the HARD and SOFT lifetimes
* are the same, the HARD lifetime will appear on the
* EXPIRE message.
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
*/
Teach key_expire() send SADB_EXPIRE message with the SADB_EXT_LIFETIME_HARD extension header type. The key_flush_sad() now will send SADB_EXPIRE message when HARD lifetime expires. This is required by RFC 2367 and some keying daemons rely on these messages. HARD lifetime messages have precedence over SOFT lifetime messages, so now they will be checked first. Also now SADB_EXPIRE messages will be send even the SA has not been used, because keying daemons might want to rekey such SA. PR: 200282, 200283 Submitted by: Tobias Brunner <tobias at strongswan dot org> MFC after: 2 weeks
2015-05-19 08:30:04 +00:00
/* check HARD lifetime */
if ((sav->lft_h->addtime != 0 &&
now - sav->created > sav->lft_h->addtime) ||
(sav->lft_h->bytes != 0 &&
sav->lft_h->bytes < sav->lft_c->bytes)) {
key_sa_chgstate(sav, SADB_SASTATE_DEAD);
key_expire(sav, 1);
KEY_FREESAV(&sav);
}
/* check SOFT lifetime */
else if ((sav->lft_s->addtime != 0 &&
now - sav->created > sav->lft_s->addtime) ||
(sav->lft_s->bytes != 0 &&
sav->lft_s->bytes < sav->lft_c->bytes)) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
key_sa_chgstate(sav, SADB_SASTATE_DYING);
Teach key_expire() send SADB_EXPIRE message with the SADB_EXT_LIFETIME_HARD extension header type. The key_flush_sad() now will send SADB_EXPIRE message when HARD lifetime expires. This is required by RFC 2367 and some keying daemons rely on these messages. HARD lifetime messages have precedence over SOFT lifetime messages, so now they will be checked first. Also now SADB_EXPIRE messages will be send even the SA has not been used, because keying daemons might want to rekey such SA. PR: 200282, 200283 Submitted by: Tobias Brunner <tobias at strongswan dot org> MFC after: 2 weeks
2015-05-19 08:30:04 +00:00
key_expire(sav, 0);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
}
/* check DYING entry to change status to DEAD. */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
LIST_FOREACH_SAFE(sav, &sah->savtree[SADB_SASTATE_DYING], chain, nextsav) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* we don't need to check. */
if (sav->lft_h == NULL)
continue;
/* sanity check */
if (sav->lft_c == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: there is no CURRENT "
"time, why?\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
continue;
}
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
if (sav->lft_h->addtime != 0 &&
now - sav->created > sav->lft_h->addtime) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
key_sa_chgstate(sav, SADB_SASTATE_DEAD);
Change SA's state before sending SADB_EXPIRE message. This state will be reported to keying daemon. MFC after: 2 weeks
2015-05-19 08:37:03 +00:00
key_expire(sav, 1);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
KEY_FREESAV(&sav);
}
#if 0 /* XXX Should we keep to send expire message until HARD lifetime ? */
else if (sav->lft_s != NULL
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
&& sav->lft_s->addtime != 0
&& now - sav->created > sav->lft_s->addtime) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/*
* XXX: should be checked to be
* installed the valid SA.
*/
/*
* If there is no SA then sending
* expire message.
*/
Teach key_expire() send SADB_EXPIRE message with the SADB_EXT_LIFETIME_HARD extension header type. The key_flush_sad() now will send SADB_EXPIRE message when HARD lifetime expires. This is required by RFC 2367 and some keying daemons rely on these messages. HARD lifetime messages have precedence over SOFT lifetime messages, so now they will be checked first. Also now SADB_EXPIRE messages will be send even the SA has not been used, because keying daemons might want to rekey such SA. PR: 200282, 200283 Submitted by: Tobias Brunner <tobias at strongswan dot org> MFC after: 2 weeks
2015-05-19 08:30:04 +00:00
key_expire(sav, 0);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
#endif
/* check HARD lifetime by bytes */
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
else if (sav->lft_h->bytes != 0 &&
sav->lft_h->bytes < sav->lft_c->bytes) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
key_sa_chgstate(sav, SADB_SASTATE_DEAD);
Change SA's state before sending SADB_EXPIRE message. This state will be reported to keying daemon. MFC after: 2 weeks
2015-05-19 08:37:03 +00:00
key_expire(sav, 1);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
KEY_FREESAV(&sav);
}
}
/* delete entry in DEAD */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
LIST_FOREACH_SAFE(sav, &sah->savtree[SADB_SASTATE_DEAD], chain, nextsav) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* sanity check */
if (sav->state != SADB_SASTATE_DEAD) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid sav->state "
"(queue: %d SA: %d): kill it anyway\n",
__func__,
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
SADB_SASTATE_DEAD, sav->state));
}
/*
* do not call key_freesav() here.
* sav should already be freed, and sav->refcnt
* shows other references to sav
* (such as from SPD).
*/
}
}
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_UNLOCK();
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
static void
key_flush_acq(time_t now)
{
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
struct secacq *acq, *nextacq;
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
/* ACQ tree */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ACQ_LOCK();
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
for (acq = LIST_FIRST(&V_acqtree); acq != NULL; acq = nextacq) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
nextacq = LIST_NEXT(acq, chain);
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
if (now - acq->created > V_key_blockacq_lifetime
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
&& __LIST_CHAINED(acq)) {
LIST_REMOVE(acq, chain);
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
free(acq, M_IPSEC_SAQ);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
}
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ACQ_UNLOCK();
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
static void
key_flush_spacq(time_t now)
{
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
struct secspacq *acq, *nextacq;
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
/* SP ACQ tree */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SPACQ_LOCK();
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
for (acq = LIST_FIRST(&V_spacqtree); acq != NULL; acq = nextacq) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
nextacq = LIST_NEXT(acq, chain);
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
if (now - acq->created > V_key_blockacq_lifetime
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
&& __LIST_CHAINED(acq)) {
LIST_REMOVE(acq, chain);
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
free(acq, M_IPSEC_SAQ);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
}
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SPACQ_UNLOCK();
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
/*
* time handler.
* scanning SPD and SAD to check status for each entries,
* and do to remove or to expire.
* XXX: year 2038 problem may remain.
*/
Use a static callout to drive key_timehandler() instead of timeout(). While here, make key_timehandler() private to key.c. Submitted by: bz (2) Tested by: bz
2014-10-23 20:43:16 +00:00
static void
key_timehandler(void *arg)
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
{
Step 1.5 of importing the network stack virtualization infrastructure from the vimage project, as per plan established at devsummit 08/08: http://wiki.freebsd.org/Image/Notes200808DevSummit Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator macros, and CURVNET_SET() context setting macros, all currently resolving to NOPs. Prepare for virtualization of selected SYSCTL objects by introducing a family of SYSCTL_V_*() macros, currently resolving to their global counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT(). Move selected #defines from sys/sys/vimage.h to newly introduced header files specific to virtualized subsystems (sys/net/vnet.h, sys/netinet/vinet.h etc.). All the changes are verified to have zero functional impact at this point in time by doing MD5 comparision between pre- and post-change object files(*). (*) netipsec/keysock.c did not validate depending on compile time options. Implemented by: julian, bz, brooks, zec Reviewed by: julian, bz, brooks, kris, rwatson, ... Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
VNET_ITERATOR_DECL(vnet_iter);
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
time_t now = time_second;
Reimplement and/or implement vnet list locking by replacing a mostly unused custom mutex/condvar-based sleep locks with two locks: an rwlock (for non-sleeping use) and sxlock (for sleeping use). Either acquired for read is sufficient to stabilize the vnet list, but both must be acquired for write to modify the list. Replace previous no-op read locking macros, used in various places in the stack, with actual locking to prevent race conditions. Callers must declare when they may perform unbounded sleeps or not when selecting how to lock. Refactor vnet sysinits so that the vnet list and locks are initialized before kernel modules are linked, as the kernel linker will use them for modules loaded by the boot loader. Update various consumers of these KPIs based on whether they may sleep or not. Reviewed by: bz Approved by: re (kib)
2009-07-19 14:20:53 +00:00
VNET_LIST_RLOCK_NOSLEEP();
Step 1.5 of importing the network stack virtualization infrastructure from the vimage project, as per plan established at devsummit 08/08: http://wiki.freebsd.org/Image/Notes200808DevSummit Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator macros, and CURVNET_SET() context setting macros, all currently resolving to NOPs. Prepare for virtualization of selected SYSCTL objects by introducing a family of SYSCTL_V_*() macros, currently resolving to their global counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT(). Move selected #defines from sys/sys/vimage.h to newly introduced header files specific to virtualized subsystems (sys/net/vnet.h, sys/netinet/vinet.h etc.). All the changes are verified to have zero functional impact at this point in time by doing MD5 comparision between pre- and post-change object files(*). (*) netipsec/keysock.c did not validate depending on compile time options. Implemented by: julian, bz, brooks, zec Reviewed by: julian, bz, brooks, kris, rwatson, ... Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
VNET_FOREACH(vnet_iter) {
CURVNET_SET(vnet_iter);
key_flush_spd(now);
key_flush_sad(now);
key_flush_acq(now);
key_flush_spacq(now);
CURVNET_RESTORE();
}
Reimplement and/or implement vnet list locking by replacing a mostly unused custom mutex/condvar-based sleep locks with two locks: an rwlock (for non-sleeping use) and sxlock (for sleeping use). Either acquired for read is sufficient to stabilize the vnet list, but both must be acquired for write to modify the list. Replace previous no-op read locking macros, used in various places in the stack, with actual locking to prevent race conditions. Callers must declare when they may perform unbounded sleeps or not when selecting how to lock. Refactor vnet sysinits so that the vnet list and locks are initialized before kernel modules are linked, as the kernel linker will use them for modules loaded by the boot loader. Update various consumers of these KPIs based on whether they may sleep or not. Reviewed by: bz Approved by: re (kib)
2009-07-19 14:20:53 +00:00
VNET_LIST_RUNLOCK_NOSLEEP();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
#ifndef IPSEC_DEBUG2
/* do exchange to tick time !! */
Use a static callout to drive key_timehandler() instead of timeout(). While here, make key_timehandler() private to key.c. Submitted by: bz (2) Tested by: bz
2014-10-23 20:43:16 +00:00
callout_schedule(&key_timer, hz);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
#endif /* IPSEC_DEBUG2 */
}
u_long
key_random()
{
u_long value;
key_randomfill(&value, sizeof(value));
return value;
}
void
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_randomfill(void *p, size_t l)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
size_t n;
u_long v;
static int warn = 1;
n = 0;
n = (size_t)read_random(p, (u_int)l);
/* last resort */
while (n < l) {
v = random();
bcopy(&v, (u_int8_t *)p + n,
l - n < sizeof(v) ? l - n : sizeof(v));
n += sizeof(v);
if (warn) {
printf("WARNING: pseudo-random number generator "
"used for IPsec processing\n");
warn = 0;
}
}
}
/*
* map SADB_SATYPE_* to IPPROTO_*.
* if satype == SADB_SATYPE then satype is mapped to ~0.
* OUT:
* 0: invalid satype.
*/
static u_int16_t
Change the functions to ANSI in those cases where it breaks promotion to int rule. See ISO C Standard: SS6.7.5.3:15. Approved by: kib (mentor) Reviewed by: warner Tested by: silence on -current
2009-02-24 18:09:31 +00:00
key_satype2proto(u_int8_t satype)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
switch (satype) {
case SADB_SATYPE_UNSPEC:
return IPSEC_PROTO_ANY;
case SADB_SATYPE_AH:
return IPPROTO_AH;
case SADB_SATYPE_ESP:
return IPPROTO_ESP;
case SADB_X_SATYPE_IPCOMP:
return IPPROTO_IPCOMP;
Initial import of RFC 2385 (TCP-MD5) digest support. This is the first of two commits; bringing in the kernel support first. This can be enabled by compiling a kernel with options TCP_SIGNATURE and FAST_IPSEC. For the uninitiated, this is a TCP option which provides for a means of authenticating TCP sessions which came into being before IPSEC. It is still relevant today, however, as it is used by many commercial router vendors, particularly with BGP, and as such has become a requirement for interconnect at many major Internet points of presence. Several parts of the TCP and IP headers, including the segment payload, are digested with MD5, including a shared secret. The PF_KEY interface is used to manage the secrets using security associations in the SADB. There is a limitation here in that as there is no way to map a TCP flow per-port back to an SPI without polluting tcpcb or using the SPD; the code to do the latter is unstable at this time. Therefore this code only supports per-host keying granularity. Whilst FAST_IPSEC is mutually exclusive with KAME IPSEC (and thus IPv6), TCP_SIGNATURE applies only to IPv4. For the vast majority of prospective users of this feature, this will not pose any problem. This implementation is output-only; that is, the option is honoured when responding to a host initiating a TCP session, but no effort is made [yet] to authenticate inbound traffic. This is, however, sufficient to interwork with Cisco equipment. Tested with a Cisco 2501 running IOS 12.0(27), and Quagga 0.96.4 with local patches. Patches for tcpdump to validate TCP-MD5 sessions are also available from me upon request. Sponsored by: sentex.net
2004-02-11 04:26:04 +00:00
case SADB_X_SATYPE_TCPSIGNATURE:
return IPPROTO_TCP;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
default:
return 0;
}
/* NOTREACHED */
}
/*
* map IPPROTO_* to SADB_SATYPE_*
* OUT:
* 0: invalid protocol type.
*/
static u_int8_t
Change the functions to ANSI in those cases where it breaks promotion to int rule. See ISO C Standard: SS6.7.5.3:15. Approved by: kib (mentor) Reviewed by: warner Tested by: silence on -current
2009-02-24 18:09:31 +00:00
key_proto2satype(u_int16_t proto)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
switch (proto) {
case IPPROTO_AH:
return SADB_SATYPE_AH;
case IPPROTO_ESP:
return SADB_SATYPE_ESP;
case IPPROTO_IPCOMP:
return SADB_X_SATYPE_IPCOMP;
Initial import of RFC 2385 (TCP-MD5) digest support. This is the first of two commits; bringing in the kernel support first. This can be enabled by compiling a kernel with options TCP_SIGNATURE and FAST_IPSEC. For the uninitiated, this is a TCP option which provides for a means of authenticating TCP sessions which came into being before IPSEC. It is still relevant today, however, as it is used by many commercial router vendors, particularly with BGP, and as such has become a requirement for interconnect at many major Internet points of presence. Several parts of the TCP and IP headers, including the segment payload, are digested with MD5, including a shared secret. The PF_KEY interface is used to manage the secrets using security associations in the SADB. There is a limitation here in that as there is no way to map a TCP flow per-port back to an SPI without polluting tcpcb or using the SPD; the code to do the latter is unstable at this time. Therefore this code only supports per-host keying granularity. Whilst FAST_IPSEC is mutually exclusive with KAME IPSEC (and thus IPv6), TCP_SIGNATURE applies only to IPv4. For the vast majority of prospective users of this feature, this will not pose any problem. This implementation is output-only; that is, the option is honoured when responding to a host initiating a TCP session, but no effort is made [yet] to authenticate inbound traffic. This is, however, sufficient to interwork with Cisco equipment. Tested with a Cisco 2501 running IOS 12.0(27), and Quagga 0.96.4 with local patches. Patches for tcpdump to validate TCP-MD5 sessions are also available from me upon request. Sponsored by: sentex.net
2004-02-11 04:26:04 +00:00
case IPPROTO_TCP:
return SADB_X_SATYPE_TCPSIGNATURE;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
default:
return 0;
}
/* NOTREACHED */
}
/* %%% PF_KEY */
/*
* SADB_GETSPI processing is to receive
* <base, (SA2), src address, dst address, (SPI range)>
* from the IKMPd, to assign a unique spi value, to hang on the INBOUND
* tree with the status of LARVAL, and send
* <base, SA(*), address(SD)>
* to the IKMPd.
*
* IN: mhp: pointer to the pointer to each header.
* OUT: NULL if fail.
* other if success, return pointer to the message to send.
*/
static int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_getspi(struct socket *so, struct mbuf *m, const struct sadb_msghdr *mhp)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct sadb_address *src0, *dst0;
struct secasindex saidx;
struct secashead *newsah;
struct secasvar *newsav;
u_int8_t proto;
u_int32_t spi;
u_int8_t mode;
u_int32_t reqid;
int error;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(so != NULL, ("null socket"));
IPSEC_ASSERT(m != NULL, ("null mbuf"));
IPSEC_ASSERT(mhp != NULL, ("null msghdr"));
IPSEC_ASSERT(mhp->msg != NULL, ("null msg"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (mhp->ext[SADB_EXT_ADDRESS_SRC] == NULL ||
mhp->ext[SADB_EXT_ADDRESS_DST] == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid message is passed.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
if (mhp->extlen[SADB_EXT_ADDRESS_SRC] < sizeof(struct sadb_address) ||
mhp->extlen[SADB_EXT_ADDRESS_DST] < sizeof(struct sadb_address)) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid message is passed.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
if (mhp->ext[SADB_X_EXT_SA2] != NULL) {
mode = ((struct sadb_x_sa2 *)mhp->ext[SADB_X_EXT_SA2])->sadb_x_sa2_mode;
reqid = ((struct sadb_x_sa2 *)mhp->ext[SADB_X_EXT_SA2])->sadb_x_sa2_reqid;
} else {
mode = IPSEC_MODE_ANY;
reqid = 0;
}
src0 = (struct sadb_address *)(mhp->ext[SADB_EXT_ADDRESS_SRC]);
dst0 = (struct sadb_address *)(mhp->ext[SADB_EXT_ADDRESS_DST]);
/* map satype to proto */
if ((proto = key_satype2proto(mhp->msg->sadb_msg_satype)) == 0) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid satype is passed.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
/*
* Make sure the port numbers are zero.
* In case of NAT-T we will update them later if needed.
*/
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
switch (((struct sockaddr *)(src0 + 1))->sa_family) {
case AF_INET:
if (((struct sockaddr *)(src0 + 1))->sa_len !=
sizeof(struct sockaddr_in))
return key_senderror(so, m, EINVAL);
((struct sockaddr_in *)(src0 + 1))->sin_port = 0;
break;
case AF_INET6:
if (((struct sockaddr *)(src0 + 1))->sa_len !=
sizeof(struct sockaddr_in6))
return key_senderror(so, m, EINVAL);
((struct sockaddr_in6 *)(src0 + 1))->sin6_port = 0;
break;
default:
; /*???*/
}
switch (((struct sockaddr *)(dst0 + 1))->sa_family) {
case AF_INET:
if (((struct sockaddr *)(dst0 + 1))->sa_len !=
sizeof(struct sockaddr_in))
return key_senderror(so, m, EINVAL);
((struct sockaddr_in *)(dst0 + 1))->sin_port = 0;
break;
case AF_INET6:
if (((struct sockaddr *)(dst0 + 1))->sa_len !=
sizeof(struct sockaddr_in6))
return key_senderror(so, m, EINVAL);
((struct sockaddr_in6 *)(dst0 + 1))->sin6_port = 0;
break;
default:
; /*???*/
}
/* XXX boundary check against sa_len */
KEY_SETSECASIDX(proto, mode, reqid, src0 + 1, dst0 + 1, &saidx);
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
#ifdef IPSEC_NAT_T
/*
* Handle NAT-T info if present.
* We made sure the port numbers are zero above, so we do
* not have to worry in case we do not update them.
*/
if (mhp->ext[SADB_X_EXT_NAT_T_OAI] != NULL)
ipseclog((LOG_DEBUG, "%s: NAT-T OAi present\n", __func__));
if (mhp->ext[SADB_X_EXT_NAT_T_OAR] != NULL)
ipseclog((LOG_DEBUG, "%s: NAT-T OAr present\n", __func__));
if (mhp->ext[SADB_X_EXT_NAT_T_TYPE] != NULL &&
mhp->ext[SADB_X_EXT_NAT_T_SPORT] != NULL &&
mhp->ext[SADB_X_EXT_NAT_T_DPORT] != NULL) {
struct sadb_x_nat_t_type *type;
struct sadb_x_nat_t_port *sport, *dport;
if (mhp->extlen[SADB_X_EXT_NAT_T_TYPE] < sizeof(*type) ||
mhp->extlen[SADB_X_EXT_NAT_T_SPORT] < sizeof(*sport) ||
mhp->extlen[SADB_X_EXT_NAT_T_DPORT] < sizeof(*dport)) {
ipseclog((LOG_DEBUG, "%s: invalid nat-t message "
"passed.\n", __func__));
return key_senderror(so, m, EINVAL);
}
sport = (struct sadb_x_nat_t_port *)
mhp->ext[SADB_X_EXT_NAT_T_SPORT];
dport = (struct sadb_x_nat_t_port *)
mhp->ext[SADB_X_EXT_NAT_T_DPORT];
if (sport)
KEY_PORTTOSADDR(&saidx.src, sport->sadb_x_nat_t_port_port);
if (dport)
KEY_PORTTOSADDR(&saidx.dst, dport->sadb_x_nat_t_port_port);
}
#endif
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* SPI allocation */
spi = key_do_getnewspi((struct sadb_spirange *)mhp->ext[SADB_EXT_SPIRANGE],
&saidx);
if (spi == 0)
return key_senderror(so, m, EINVAL);
/* get a SA index */
if ((newsah = key_getsah(&saidx)) == NULL) {
/* create a new SA index */
if ((newsah = key_newsah(&saidx)) == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: No more memory.\n",__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, ENOBUFS);
}
}
/* get a new SA */
/* XXX rewrite */
newsav = KEY_NEWSAV(m, mhp, newsah, &error);
if (newsav == NULL) {
/* XXX don't free new SA index allocated in above. */
return key_senderror(so, m, error);
}
/* set spi */
newsav->spi = htonl(spi);
/* delete the entry in acqtree */
if (mhp->msg->sadb_msg_seq != 0) {
struct secacq *acq;
if ((acq = key_getacqbyseq(mhp->msg->sadb_msg_seq)) != NULL) {
/* reset counter in order to deletion by timehandler. */
acq->created = time_second;
acq->count = 0;
}
}
{
struct mbuf *n, *nn;
struct sadb_sa *m_sa;
struct sadb_msg *newmsg;
int off, len;
/* create new sadb_msg to reply. */
len = PFKEY_ALIGN8(sizeof(struct sadb_msg)) +
PFKEY_ALIGN8(sizeof(struct sadb_sa));
Mechanically substitute flags from historic mbuf allocator with malloc(9) flags within sys. Exceptions: - sys/contrib not touched - sys/mbuf.h edited manually
2012-12-05 08:04:20 +00:00
MGETHDR(n, M_NOWAIT, MT_DATA);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (len > MHLEN) {
In order to reduce use of M_EXT outside of the mbuf allocator and socket-buffer implementations, introduce a return value for MCLGET() (and m_cljget() that underlies it) to allow the caller to avoid testing M_EXT itself. Update all callers to use the return value. With this change, very few network device drivers remain aware of M_EXT; the primary exceptions lie in mbuf-chain pretty printers for debugging, and in a few cases, custom mbuf and cluster allocation implementations. NB: This is a difficult-to-test change as it touches many drivers for which I don't have physical devices. Instead we've gone for intensive review, but further post-commit review would definitely be appreciated to spot errors where changes could not easily be made mechanically, but were largely mechanical in nature. Differential Revision: https://reviews.freebsd.org/D1440 Reviewed by: adrian, bz, gnn Sponsored by: EMC / Isilon Storage Division
2015-01-06 12:59:37 +00:00
if (!(MCLGET(n, M_NOWAIT))) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
m_freem(n);
n = NULL;
}
}
if (!n)
return key_senderror(so, m, ENOBUFS);
n->m_len = len;
n->m_next = NULL;
off = 0;
m_copydata(m, 0, sizeof(struct sadb_msg), mtod(n, caddr_t) + off);
off += PFKEY_ALIGN8(sizeof(struct sadb_msg));
m_sa = (struct sadb_sa *)(mtod(n, caddr_t) + off);
m_sa->sadb_sa_len = PFKEY_UNIT64(sizeof(struct sadb_sa));
m_sa->sadb_sa_exttype = SADB_EXT_SA;
m_sa->sadb_sa_spi = htonl(spi);
off += PFKEY_ALIGN8(sizeof(struct sadb_sa));
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(off == len,
("length inconsistency (off %u len %u)", off, len));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
n->m_next = key_gather_mbuf(m, mhp, 0, 2, SADB_EXT_ADDRESS_SRC,
SADB_EXT_ADDRESS_DST);
if (!n->m_next) {
m_freem(n);
return key_senderror(so, m, ENOBUFS);
}
if (n->m_len < sizeof(struct sadb_msg)) {
n = m_pullup(n, sizeof(struct sadb_msg));
if (n == NULL)
return key_sendup_mbuf(so, m, KEY_SENDUP_ONE);
}
n->m_pkthdr.len = 0;
for (nn = n; nn; nn = nn->m_next)
n->m_pkthdr.len += nn->m_len;
newmsg = mtod(n, struct sadb_msg *);
newmsg->sadb_msg_seq = newsav->seq;
newmsg->sadb_msg_errno = 0;
newmsg->sadb_msg_len = PFKEY_UNIT64(n->m_pkthdr.len);
m_freem(m);
return key_sendup_mbuf(so, n, KEY_SENDUP_ONE);
}
}
/*
* allocating new SPI
* called by key_getspi().
* OUT:
* 0: failure.
* others: success.
*/
static u_int32_t
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_do_getnewspi(struct sadb_spirange *spirange, struct secasindex *saidx)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
u_int32_t newspi;
u_int32_t min, max;
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
int count = V_key_spi_trycnt;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* set spi range to allocate */
if (spirange != NULL) {
min = spirange->sadb_spirange_min;
max = spirange->sadb_spirange_max;
} else {
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
min = V_key_spi_minval;
max = V_key_spi_maxval;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
/* IPCOMP needs 2-byte SPI */
if (saidx->proto == IPPROTO_IPCOMP) {
u_int32_t t;
if (min >= 0x10000)
min = 0xffff;
if (max >= 0x10000)
max = 0xffff;
if (min > max) {
t = min; min = max; max = t;
}
}
if (min == max) {
if (key_checkspidup(saidx, min) != NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: SPI %u exists already.\n",
__func__, min));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return 0;
}
count--; /* taking one cost. */
newspi = min;
} else {
/* init SPI */
newspi = 0;
/* when requesting to allocate spi ranged */
while (count--) {
/* generate pseudo-random SPI value ranged. */
newspi = min + (key_random() % (max - min + 1));
if (key_checkspidup(saidx, newspi) == NULL)
break;
}
if (count == 0 || newspi == 0) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: to allocate spi is failed.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return 0;
}
}
/* statistics */
keystat.getspi_count =
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
(keystat.getspi_count + V_key_spi_trycnt - count) / 2;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return newspi;
}
/*
* SADB_UPDATE processing
* receive
* <base, SA, (SA2), (lifetime(HSC),) address(SD), (address(P),)
* key(AE), (identity(SD),) (sensitivity)>
* from the ikmpd, and update a secasvar entry whose status is SADB_SASTATE_LARVAL.
* and send
* <base, SA, (SA2), (lifetime(HSC),) address(SD), (address(P),)
* (identity(SD),) (sensitivity)>
* to the ikmpd.
*
* m will always be freed.
*/
static int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_update(struct socket *so, struct mbuf *m, const struct sadb_msghdr *mhp)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct sadb_sa *sa0;
struct sadb_address *src0, *dst0;
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
#ifdef IPSEC_NAT_T
struct sadb_x_nat_t_type *type;
Move setting of ports from NAT-T below key_getsah() and actually below key_setsaval(). Without that, the lookup for the SA had failed as we were looking for a SA with the new, updated port numbers instead of the old ones and were comparing the ports in key_cmpsaidx(). This makes updating the remote -> local SA on the initiator work again. Problem introduced with: p4 changeset 152114
2009-06-19 21:01:55 +00:00
struct sadb_x_nat_t_port *sport, *dport;
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
struct sadb_address *iaddr, *raddr;
struct sadb_x_nat_t_frag *frag;
#endif
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
struct secasindex saidx;
struct secashead *sah;
struct secasvar *sav;
u_int16_t proto;
u_int8_t mode;
u_int32_t reqid;
int error;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(so != NULL, ("null socket"));
IPSEC_ASSERT(m != NULL, ("null mbuf"));
IPSEC_ASSERT(mhp != NULL, ("null msghdr"));
IPSEC_ASSERT(mhp->msg != NULL, ("null msg"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* map satype to proto */
if ((proto = key_satype2proto(mhp->msg->sadb_msg_satype)) == 0) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid satype is passed.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
if (mhp->ext[SADB_EXT_SA] == NULL ||
mhp->ext[SADB_EXT_ADDRESS_SRC] == NULL ||
mhp->ext[SADB_EXT_ADDRESS_DST] == NULL ||
(mhp->msg->sadb_msg_satype == SADB_SATYPE_ESP &&
mhp->ext[SADB_EXT_KEY_ENCRYPT] == NULL) ||
(mhp->msg->sadb_msg_satype == SADB_SATYPE_AH &&
mhp->ext[SADB_EXT_KEY_AUTH] == NULL) ||
(mhp->ext[SADB_EXT_LIFETIME_HARD] != NULL &&
mhp->ext[SADB_EXT_LIFETIME_SOFT] == NULL) ||
(mhp->ext[SADB_EXT_LIFETIME_HARD] == NULL &&
mhp->ext[SADB_EXT_LIFETIME_SOFT] != NULL)) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid message is passed.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
if (mhp->extlen[SADB_EXT_SA] < sizeof(struct sadb_sa) ||
mhp->extlen[SADB_EXT_ADDRESS_SRC] < sizeof(struct sadb_address) ||
mhp->extlen[SADB_EXT_ADDRESS_DST] < sizeof(struct sadb_address)) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid message is passed.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
if (mhp->ext[SADB_X_EXT_SA2] != NULL) {
mode = ((struct sadb_x_sa2 *)mhp->ext[SADB_X_EXT_SA2])->sadb_x_sa2_mode;
reqid = ((struct sadb_x_sa2 *)mhp->ext[SADB_X_EXT_SA2])->sadb_x_sa2_reqid;
} else {
mode = IPSEC_MODE_ANY;
reqid = 0;
}
/* XXX boundary checking for other extensions */
sa0 = (struct sadb_sa *)mhp->ext[SADB_EXT_SA];
src0 = (struct sadb_address *)(mhp->ext[SADB_EXT_ADDRESS_SRC]);
dst0 = (struct sadb_address *)(mhp->ext[SADB_EXT_ADDRESS_DST]);
/* XXX boundary check against sa_len */
KEY_SETSECASIDX(proto, mode, reqid, src0 + 1, dst0 + 1, &saidx);
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
/*
* Make sure the port numbers are zero.
* In case of NAT-T we will update them later if needed.
*/
KEY_PORTTOSADDR(&saidx.src, 0);
KEY_PORTTOSADDR(&saidx.dst, 0);
#ifdef IPSEC_NAT_T
/*
* Handle NAT-T info if present.
*/
if (mhp->ext[SADB_X_EXT_NAT_T_TYPE] != NULL &&
mhp->ext[SADB_X_EXT_NAT_T_SPORT] != NULL &&
mhp->ext[SADB_X_EXT_NAT_T_DPORT] != NULL) {
if (mhp->extlen[SADB_X_EXT_NAT_T_TYPE] < sizeof(*type) ||
mhp->extlen[SADB_X_EXT_NAT_T_SPORT] < sizeof(*sport) ||
mhp->extlen[SADB_X_EXT_NAT_T_DPORT] < sizeof(*dport)) {
ipseclog((LOG_DEBUG, "%s: invalid message.\n",
__func__));
return key_senderror(so, m, EINVAL);
}
type = (struct sadb_x_nat_t_type *)
mhp->ext[SADB_X_EXT_NAT_T_TYPE];
sport = (struct sadb_x_nat_t_port *)
mhp->ext[SADB_X_EXT_NAT_T_SPORT];
dport = (struct sadb_x_nat_t_port *)
mhp->ext[SADB_X_EXT_NAT_T_DPORT];
} else {
type = 0;
Move setting of ports from NAT-T below key_getsah() and actually below key_setsaval(). Without that, the lookup for the SA had failed as we were looking for a SA with the new, updated port numbers instead of the old ones and were comparing the ports in key_cmpsaidx(). This makes updating the remote -> local SA on the initiator work again. Problem introduced with: p4 changeset 152114
2009-06-19 21:01:55 +00:00
sport = dport = 0;
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
}
if (mhp->ext[SADB_X_EXT_NAT_T_OAI] != NULL &&
mhp->ext[SADB_X_EXT_NAT_T_OAR] != NULL) {
if (mhp->extlen[SADB_X_EXT_NAT_T_OAI] < sizeof(*iaddr) ||
mhp->extlen[SADB_X_EXT_NAT_T_OAR] < sizeof(*raddr)) {
ipseclog((LOG_DEBUG, "%s: invalid message\n",
__func__));
return key_senderror(so, m, EINVAL);
}
iaddr = (struct sadb_address *)mhp->ext[SADB_X_EXT_NAT_T_OAI];
raddr = (struct sadb_address *)mhp->ext[SADB_X_EXT_NAT_T_OAR];
ipseclog((LOG_DEBUG, "%s: NAT-T OAi/r present\n", __func__));
} else {
iaddr = raddr = NULL;
}
if (mhp->ext[SADB_X_EXT_NAT_T_FRAG] != NULL) {
if (mhp->extlen[SADB_X_EXT_NAT_T_FRAG] < sizeof(*frag)) {
ipseclog((LOG_DEBUG, "%s: invalid message\n",
__func__));
return key_senderror(so, m, EINVAL);
}
frag = (struct sadb_x_nat_t_frag *)
mhp->ext[SADB_X_EXT_NAT_T_FRAG];
} else {
frag = 0;
}
#endif
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* get a SA header */
if ((sah = key_getsah(&saidx)) == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: no SA index found.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, ENOENT);
}
/* set spidx if there */
/* XXX rewrite */
error = key_setident(sah, m, mhp);
if (error)
return key_senderror(so, m, error);
/* find a SA with sequence number. */
#ifdef IPSEC_DOSEQCHECK
if (mhp->msg->sadb_msg_seq != 0
&& (sav = key_getsavbyseq(sah, mhp->msg->sadb_msg_seq)) == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: no larval SA with sequence %u "
"exists.\n", __func__, mhp->msg->sadb_msg_seq));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, ENOENT);
}
#else
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_LOCK();
sav = key_getsavbyspi(sah, sa0->sadb_sa_spi);
SAHTREE_UNLOCK();
if (sav == NULL) {
ipseclog((LOG_DEBUG, "%s: no such a SA found (spi:%u)\n",
__func__, (u_int32_t)ntohl(sa0->sadb_sa_spi)));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
#endif
/* validity check */
if (sav->sah->saidx.proto != proto) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: protocol mismatched "
"(DB=%u param=%u)\n", __func__,
sav->sah->saidx.proto, proto));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
#ifdef IPSEC_DOSEQCHECK
if (sav->spi != sa0->sadb_sa_spi) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: SPI mismatched (DB:%u param:%u)\n",
__func__,
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
(u_int32_t)ntohl(sav->spi),
(u_int32_t)ntohl(sa0->sadb_sa_spi)));
return key_senderror(so, m, EINVAL);
}
#endif
if (sav->pid != mhp->msg->sadb_msg_pid) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: pid mismatched (DB:%u param:%u)\n",
__func__, sav->pid, mhp->msg->sadb_msg_pid));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
/* copy sav values */
error = key_setsaval(sav, m, mhp);
if (error) {
KEY_FREESAV(&sav);
return key_senderror(so, m, error);
}
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
#ifdef IPSEC_NAT_T
/*
* Handle more NAT-T info if present,
* now that we have a sav to fill.
*/
if (type)
sav->natt_type = type->sadb_x_nat_t_type_type;
Move setting of ports from NAT-T below key_getsah() and actually below key_setsaval(). Without that, the lookup for the SA had failed as we were looking for a SA with the new, updated port numbers instead of the old ones and were comparing the ports in key_cmpsaidx(). This makes updating the remote -> local SA on the initiator work again. Problem introduced with: p4 changeset 152114
2009-06-19 21:01:55 +00:00
if (sport)
KEY_PORTTOSADDR(&sav->sah->saidx.src,
sport->sadb_x_nat_t_port_port);
if (dport)
KEY_PORTTOSADDR(&sav->sah->saidx.dst,
dport->sadb_x_nat_t_port_port);
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
#if 0
/*
* In case SADB_X_EXT_NAT_T_FRAG was not given, leave it at 0.
* We should actually check for a minimum MTU here, if we
* want to support it in ip_output.
*/
if (frag)
sav->natt_esp_frag_len = frag->sadb_x_nat_t_frag_fraglen;
#endif
#endif
Update SA's NAT-T stuff before calling key_mature() in key_update(), as SA may be used as soon as key_mature() has been called. Obtained from: NETASQ MFC after: 1 week
2010-05-05 08:55:26 +00:00
/* check SA values to be mature. */
if ((mhp->msg->sadb_msg_errno = key_mature(sav)) != 0) {
KEY_FREESAV(&sav);
return key_senderror(so, m, 0);
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct mbuf *n;
/* set msg buf from mhp */
n = key_getmsgbuf_x1(m, mhp);
if (n == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: No more memory.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, ENOBUFS);
}
m_freem(m);
return key_sendup_mbuf(so, n, KEY_SENDUP_ALL);
}
}
/*
* search SAD with sequence for a SA which state is SADB_SASTATE_LARVAL.
* only called by key_update().
* OUT:
* NULL : not found
* others : found, pointer to a SA.
*/
#ifdef IPSEC_DOSEQCHECK
static struct secasvar *
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_getsavbyseq(struct secashead *sah, u_int32_t seq)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct secasvar *sav;
u_int state;
state = SADB_SASTATE_LARVAL;
/* search SAD with sequence number ? */
LIST_FOREACH(sav, &sah->savtree[state], chain) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
KEY_CHKSASTATE(state, sav->state, __func__);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (sav->seq == seq) {
Prevent disappearing SAD entries by implementing MPsafe refcounting. "Why didn't he use SECASVAR_LOCK()/SECASVAR_UNLOCK() macros to synchronize access to the secasvar structure's fields?" one may ask. There were two reasons: 1. refcount(9) is faster then mutex(9) synchronization (one atomic operation instead of two). 2. Those macros are not used now at all, so at some point we may decide to remove them entirely. OK'ed by: gnn MFC after: 2 weeks
2006-05-20 15:35:36 +00:00
sa_addref(sav);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
KEYDEBUG(KEYDEBUG_IPSEC_STAMP,
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
printf("DP %s cause refcnt++:%d SA:%p\n",
__func__, sav->refcnt, sav));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return sav;
}
}
return NULL;
}
#endif
/*
* SADB_ADD processing
Correct typos, mostly s/ a / an / where appropriate. Some whitespace cleanup, especially in troff files.
2003-01-01 18:49:04 +00:00
* add an entry to SA database, when received
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
* <base, SA, (SA2), (lifetime(HSC),) address(SD), (address(P),)
* key(AE), (identity(SD),) (sensitivity)>
* from the ikmpd,
* and send
* <base, SA, (SA2), (lifetime(HSC),) address(SD), (address(P),)
* (identity(SD),) (sensitivity)>
* to the ikmpd.
*
* IGNORE identity and sensitivity messages.
*
* m will always be freed.
*/
static int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_add(struct socket *so, struct mbuf *m, const struct sadb_msghdr *mhp)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct sadb_sa *sa0;
struct sadb_address *src0, *dst0;
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
#ifdef IPSEC_NAT_T
struct sadb_x_nat_t_type *type;
struct sadb_address *iaddr, *raddr;
struct sadb_x_nat_t_frag *frag;
#endif
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
struct secasindex saidx;
struct secashead *newsah;
struct secasvar *newsav;
u_int16_t proto;
u_int8_t mode;
u_int32_t reqid;
int error;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(so != NULL, ("null socket"));
IPSEC_ASSERT(m != NULL, ("null mbuf"));
IPSEC_ASSERT(mhp != NULL, ("null msghdr"));
IPSEC_ASSERT(mhp->msg != NULL, ("null msg"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* map satype to proto */
if ((proto = key_satype2proto(mhp->msg->sadb_msg_satype)) == 0) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid satype is passed.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
if (mhp->ext[SADB_EXT_SA] == NULL ||
mhp->ext[SADB_EXT_ADDRESS_SRC] == NULL ||
mhp->ext[SADB_EXT_ADDRESS_DST] == NULL ||
(mhp->msg->sadb_msg_satype == SADB_SATYPE_ESP &&
mhp->ext[SADB_EXT_KEY_ENCRYPT] == NULL) ||
(mhp->msg->sadb_msg_satype == SADB_SATYPE_AH &&
mhp->ext[SADB_EXT_KEY_AUTH] == NULL) ||
(mhp->ext[SADB_EXT_LIFETIME_HARD] != NULL &&
mhp->ext[SADB_EXT_LIFETIME_SOFT] == NULL) ||
(mhp->ext[SADB_EXT_LIFETIME_HARD] == NULL &&
mhp->ext[SADB_EXT_LIFETIME_SOFT] != NULL)) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid message is passed.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
if (mhp->extlen[SADB_EXT_SA] < sizeof(struct sadb_sa) ||
mhp->extlen[SADB_EXT_ADDRESS_SRC] < sizeof(struct sadb_address) ||
mhp->extlen[SADB_EXT_ADDRESS_DST] < sizeof(struct sadb_address)) {
/* XXX need more */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid message is passed.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
if (mhp->ext[SADB_X_EXT_SA2] != NULL) {
mode = ((struct sadb_x_sa2 *)mhp->ext[SADB_X_EXT_SA2])->sadb_x_sa2_mode;
reqid = ((struct sadb_x_sa2 *)mhp->ext[SADB_X_EXT_SA2])->sadb_x_sa2_reqid;
} else {
mode = IPSEC_MODE_ANY;
reqid = 0;
}
sa0 = (struct sadb_sa *)mhp->ext[SADB_EXT_SA];
src0 = (struct sadb_address *)mhp->ext[SADB_EXT_ADDRESS_SRC];
dst0 = (struct sadb_address *)mhp->ext[SADB_EXT_ADDRESS_DST];
/* XXX boundary check against sa_len */
KEY_SETSECASIDX(proto, mode, reqid, src0 + 1, dst0 + 1, &saidx);
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
/*
* Make sure the port numbers are zero.
* In case of NAT-T we will update them later if needed.
*/
KEY_PORTTOSADDR(&saidx.src, 0);
KEY_PORTTOSADDR(&saidx.dst, 0);
#ifdef IPSEC_NAT_T
/*
* Handle NAT-T info if present.
*/
if (mhp->ext[SADB_X_EXT_NAT_T_TYPE] != NULL &&
mhp->ext[SADB_X_EXT_NAT_T_SPORT] != NULL &&
mhp->ext[SADB_X_EXT_NAT_T_DPORT] != NULL) {
struct sadb_x_nat_t_port *sport, *dport;
if (mhp->extlen[SADB_X_EXT_NAT_T_TYPE] < sizeof(*type) ||
mhp->extlen[SADB_X_EXT_NAT_T_SPORT] < sizeof(*sport) ||
mhp->extlen[SADB_X_EXT_NAT_T_DPORT] < sizeof(*dport)) {
ipseclog((LOG_DEBUG, "%s: invalid message.\n",
__func__));
return key_senderror(so, m, EINVAL);
}
type = (struct sadb_x_nat_t_type *)
mhp->ext[SADB_X_EXT_NAT_T_TYPE];
sport = (struct sadb_x_nat_t_port *)
mhp->ext[SADB_X_EXT_NAT_T_SPORT];
dport = (struct sadb_x_nat_t_port *)
mhp->ext[SADB_X_EXT_NAT_T_DPORT];
if (sport)
KEY_PORTTOSADDR(&saidx.src,
sport->sadb_x_nat_t_port_port);
if (dport)
KEY_PORTTOSADDR(&saidx.dst,
dport->sadb_x_nat_t_port_port);
} else {
type = 0;
}
if (mhp->ext[SADB_X_EXT_NAT_T_OAI] != NULL &&
mhp->ext[SADB_X_EXT_NAT_T_OAR] != NULL) {
if (mhp->extlen[SADB_X_EXT_NAT_T_OAI] < sizeof(*iaddr) ||
mhp->extlen[SADB_X_EXT_NAT_T_OAR] < sizeof(*raddr)) {
ipseclog((LOG_DEBUG, "%s: invalid message\n",
__func__));
return key_senderror(so, m, EINVAL);
}
iaddr = (struct sadb_address *)mhp->ext[SADB_X_EXT_NAT_T_OAI];
raddr = (struct sadb_address *)mhp->ext[SADB_X_EXT_NAT_T_OAR];
ipseclog((LOG_DEBUG, "%s: NAT-T OAi/r present\n", __func__));
} else {
iaddr = raddr = NULL;
}
if (mhp->ext[SADB_X_EXT_NAT_T_FRAG] != NULL) {
if (mhp->extlen[SADB_X_EXT_NAT_T_FRAG] < sizeof(*frag)) {
ipseclog((LOG_DEBUG, "%s: invalid message\n",
__func__));
return key_senderror(so, m, EINVAL);
}
frag = (struct sadb_x_nat_t_frag *)
mhp->ext[SADB_X_EXT_NAT_T_FRAG];
} else {
frag = 0;
}
#endif
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* get a SA header */
if ((newsah = key_getsah(&saidx)) == NULL) {
/* create a new SA header */
if ((newsah = key_newsah(&saidx)) == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: No more memory.\n",__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, ENOBUFS);
}
}
/* set spidx if there */
/* XXX rewrite */
error = key_setident(newsah, m, mhp);
if (error) {
return key_senderror(so, m, error);
}
/* create new SA entry. */
/* We can create new SA only if SPI is differenct. */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_LOCK();
newsav = key_getsavbyspi(newsah, sa0->sadb_sa_spi);
SAHTREE_UNLOCK();
if (newsav != NULL) {
ipseclog((LOG_DEBUG, "%s: SA already exists.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EEXIST);
}
newsav = KEY_NEWSAV(m, mhp, newsah, &error);
if (newsav == NULL) {
return key_senderror(so, m, error);
}
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
#ifdef IPSEC_NAT_T
/*
* Handle more NAT-T info if present,
* now that we have a sav to fill.
*/
if (type)
newsav->natt_type = type->sadb_x_nat_t_type_type;
#if 0
/*
* In case SADB_X_EXT_NAT_T_FRAG was not given, leave it at 0.
* We should actually check for a minimum MTU here, if we
* want to support it in ip_output.
*/
if (frag)
newsav->natt_esp_frag_len = frag->sadb_x_nat_t_frag_fraglen;
#endif
#endif
Set SA's natt_type before calling key_mature() in key_add(), as the SA may be used as soon as key_mature() has been done. Obtained from: NETASQ MFC after: 1 week
2010-05-05 08:58:58 +00:00
/* check SA values to be mature. */
if ((error = key_mature(newsav)) != 0) {
KEY_FREESAV(&newsav);
return key_senderror(so, m, error);
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/*
* don't call key_freesav() here, as we would like to keep the SA
* in the database on success.
*/
{
struct mbuf *n;
/* set msg buf from mhp */
n = key_getmsgbuf_x1(m, mhp);
if (n == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: No more memory.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, ENOBUFS);
}
m_freem(m);
return key_sendup_mbuf(so, n, KEY_SENDUP_ALL);
}
}
/* m is retained */
static int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_setident(struct secashead *sah, struct mbuf *m,
const struct sadb_msghdr *mhp)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
const struct sadb_ident *idsrc, *iddst;
int idsrclen, iddstlen;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(sah != NULL, ("null secashead"));
IPSEC_ASSERT(m != NULL, ("null mbuf"));
IPSEC_ASSERT(mhp != NULL, ("null msghdr"));
IPSEC_ASSERT(mhp->msg != NULL, ("null msg"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* don't make buffer if not there */
if (mhp->ext[SADB_EXT_IDENTITY_SRC] == NULL &&
mhp->ext[SADB_EXT_IDENTITY_DST] == NULL) {
sah->idents = NULL;
sah->identd = NULL;
return 0;
}
if (mhp->ext[SADB_EXT_IDENTITY_SRC] == NULL ||
mhp->ext[SADB_EXT_IDENTITY_DST] == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid identity.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return EINVAL;
}
idsrc = (const struct sadb_ident *)mhp->ext[SADB_EXT_IDENTITY_SRC];
iddst = (const struct sadb_ident *)mhp->ext[SADB_EXT_IDENTITY_DST];
idsrclen = mhp->extlen[SADB_EXT_IDENTITY_SRC];
iddstlen = mhp->extlen[SADB_EXT_IDENTITY_DST];
/* validity check */
if (idsrc->sadb_ident_type != iddst->sadb_ident_type) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: ident type mismatch.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return EINVAL;
}
switch (idsrc->sadb_ident_type) {
case SADB_IDENTTYPE_PREFIX:
case SADB_IDENTTYPE_FQDN:
case SADB_IDENTTYPE_USERFQDN:
default:
/* XXX do nothing */
sah->idents = NULL;
sah->identd = NULL;
return 0;
}
/* make structure */
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
sah->idents = malloc(sizeof(struct secident), M_IPSEC_MISC, M_NOWAIT);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (sah->idents == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: No more memory.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return ENOBUFS;
}
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
sah->identd = malloc(sizeof(struct secident), M_IPSEC_MISC, M_NOWAIT);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (sah->identd == NULL) {
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
free(sah->idents, M_IPSEC_MISC);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
sah->idents = NULL;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: No more memory.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return ENOBUFS;
}
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
sah->idents->type = idsrc->sadb_ident_type;
sah->idents->id = idsrc->sadb_ident_id;
sah->identd->type = iddst->sadb_ident_type;
sah->identd->id = iddst->sadb_ident_id;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return 0;
}
/*
* m will not be freed on return.
* it is caller's responsibility to free the result.
*/
static struct mbuf *
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_getmsgbuf_x1(struct mbuf *m, const struct sadb_msghdr *mhp)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct mbuf *n;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(m != NULL, ("null mbuf"));
IPSEC_ASSERT(mhp != NULL, ("null msghdr"));
IPSEC_ASSERT(mhp->msg != NULL, ("null msg"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* create new sadb_msg to reply. */
n = key_gather_mbuf(m, mhp, 1, 9, SADB_EXT_RESERVED,
SADB_EXT_SA, SADB_X_EXT_SA2,
SADB_EXT_ADDRESS_SRC, SADB_EXT_ADDRESS_DST,
SADB_EXT_LIFETIME_HARD, SADB_EXT_LIFETIME_SOFT,
SADB_EXT_IDENTITY_SRC, SADB_EXT_IDENTITY_DST);
if (!n)
return NULL;
if (n->m_len < sizeof(struct sadb_msg)) {
n = m_pullup(n, sizeof(struct sadb_msg));
if (n == NULL)
return NULL;
}
mtod(n, struct sadb_msg *)->sadb_msg_errno = 0;
mtod(n, struct sadb_msg *)->sadb_msg_len =
PFKEY_UNIT64(n->m_pkthdr.len);
return n;
}
/*
* SADB_DELETE processing
* receive
* <base, SA(*), address(SD)>
* from the ikmpd, and set SADB_SASTATE_DEAD,
* and send,
* <base, SA(*), address(SD)>
* to the ikmpd.
*
* m will always be freed.
*/
static int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_delete(struct socket *so, struct mbuf *m, const struct sadb_msghdr *mhp)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct sadb_sa *sa0;
struct sadb_address *src0, *dst0;
struct secasindex saidx;
struct secashead *sah;
struct secasvar *sav = NULL;
u_int16_t proto;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(so != NULL, ("null socket"));
IPSEC_ASSERT(m != NULL, ("null mbuf"));
IPSEC_ASSERT(mhp != NULL, ("null msghdr"));
IPSEC_ASSERT(mhp->msg != NULL, ("null msg"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* map satype to proto */
if ((proto = key_satype2proto(mhp->msg->sadb_msg_satype)) == 0) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid satype is passed.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
if (mhp->ext[SADB_EXT_ADDRESS_SRC] == NULL ||
mhp->ext[SADB_EXT_ADDRESS_DST] == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid message is passed.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
if (mhp->extlen[SADB_EXT_ADDRESS_SRC] < sizeof(struct sadb_address) ||
mhp->extlen[SADB_EXT_ADDRESS_DST] < sizeof(struct sadb_address)) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid message is passed.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
if (mhp->ext[SADB_EXT_SA] == NULL) {
/*
* Caller wants us to delete all non-LARVAL SAs
* that match the src/dst. This is used during
* IKE INITIAL-CONTACT.
*/
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: doing delete all.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_delete_all(so, m, mhp, proto);
} else if (mhp->extlen[SADB_EXT_SA] < sizeof(struct sadb_sa)) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid message is passed.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
sa0 = (struct sadb_sa *)mhp->ext[SADB_EXT_SA];
src0 = (struct sadb_address *)(mhp->ext[SADB_EXT_ADDRESS_SRC]);
dst0 = (struct sadb_address *)(mhp->ext[SADB_EXT_ADDRESS_DST]);
/* XXX boundary check against sa_len */
KEY_SETSECASIDX(proto, IPSEC_MODE_ANY, 0, src0 + 1, dst0 + 1, &saidx);
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
/*
* Make sure the port numbers are zero.
* In case of NAT-T we will update them later if needed.
*/
KEY_PORTTOSADDR(&saidx.src, 0);
KEY_PORTTOSADDR(&saidx.dst, 0);
#ifdef IPSEC_NAT_T
/*
* Handle NAT-T info if present.
*/
if (mhp->ext[SADB_X_EXT_NAT_T_SPORT] != NULL &&
mhp->ext[SADB_X_EXT_NAT_T_DPORT] != NULL) {
struct sadb_x_nat_t_port *sport, *dport;
if (mhp->extlen[SADB_X_EXT_NAT_T_SPORT] < sizeof(*sport) ||
mhp->extlen[SADB_X_EXT_NAT_T_DPORT] < sizeof(*dport)) {
ipseclog((LOG_DEBUG, "%s: invalid message.\n",
__func__));
return key_senderror(so, m, EINVAL);
}
sport = (struct sadb_x_nat_t_port *)
mhp->ext[SADB_X_EXT_NAT_T_SPORT];
dport = (struct sadb_x_nat_t_port *)
mhp->ext[SADB_X_EXT_NAT_T_DPORT];
if (sport)
KEY_PORTTOSADDR(&saidx.src,
sport->sadb_x_nat_t_port_port);
if (dport)
KEY_PORTTOSADDR(&saidx.dst,
dport->sadb_x_nat_t_port_port);
}
#endif
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* get a SA header */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_LOCK();
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
LIST_FOREACH(sah, &V_sahtree, chain) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (sah->state == SADB_SASTATE_DEAD)
continue;
if (key_cmpsaidx(&sah->saidx, &saidx, CMP_HEAD) == 0)
continue;
/* get a SA with SPI. */
sav = key_getsavbyspi(sah, sa0->sadb_sa_spi);
if (sav)
break;
}
if (sah == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_UNLOCK();
ipseclog((LOG_DEBUG, "%s: no SA found.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, ENOENT);
}
key_sa_chgstate(sav, SADB_SASTATE_DEAD);
KEY_FREESAV(&sav);
fixed two race conditions when inserting/removing SAs via PFKey, which can both lead to a kernel panic when adding/removing quickly a lot of SAs. Obtained from: NETASQ MFC after: 2w (MFC on 8 before 8.0 release ???)
2009-11-17 16:00:41 +00:00
SAHTREE_UNLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct mbuf *n;
struct sadb_msg *newmsg;
/* create new sadb_msg to reply. */
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
/* XXX-BZ NAT-T extensions? */
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
n = key_gather_mbuf(m, mhp, 1, 4, SADB_EXT_RESERVED,
SADB_EXT_SA, SADB_EXT_ADDRESS_SRC, SADB_EXT_ADDRESS_DST);
if (!n)
return key_senderror(so, m, ENOBUFS);
if (n->m_len < sizeof(struct sadb_msg)) {
n = m_pullup(n, sizeof(struct sadb_msg));
if (n == NULL)
return key_senderror(so, m, ENOBUFS);
}
newmsg = mtod(n, struct sadb_msg *);
newmsg->sadb_msg_errno = 0;
newmsg->sadb_msg_len = PFKEY_UNIT64(n->m_pkthdr.len);
m_freem(m);
return key_sendup_mbuf(so, n, KEY_SENDUP_ALL);
}
}
/*
* delete all SAs for src/dst. Called from key_delete().
*/
static int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_delete_all(struct socket *so, struct mbuf *m,
const struct sadb_msghdr *mhp, u_int16_t proto)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct sadb_address *src0, *dst0;
struct secasindex saidx;
struct secashead *sah;
struct secasvar *sav, *nextsav;
u_int stateidx, state;
src0 = (struct sadb_address *)(mhp->ext[SADB_EXT_ADDRESS_SRC]);
dst0 = (struct sadb_address *)(mhp->ext[SADB_EXT_ADDRESS_DST]);
/* XXX boundary check against sa_len */
KEY_SETSECASIDX(proto, IPSEC_MODE_ANY, 0, src0 + 1, dst0 + 1, &saidx);
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
/*
* Make sure the port numbers are zero.
* In case of NAT-T we will update them later if needed.
*/
KEY_PORTTOSADDR(&saidx.src, 0);
KEY_PORTTOSADDR(&saidx.dst, 0);
#ifdef IPSEC_NAT_T
/*
* Handle NAT-T info if present.
*/
if (mhp->ext[SADB_X_EXT_NAT_T_SPORT] != NULL &&
mhp->ext[SADB_X_EXT_NAT_T_DPORT] != NULL) {
struct sadb_x_nat_t_port *sport, *dport;
if (mhp->extlen[SADB_X_EXT_NAT_T_SPORT] < sizeof(*sport) ||
mhp->extlen[SADB_X_EXT_NAT_T_DPORT] < sizeof(*dport)) {
ipseclog((LOG_DEBUG, "%s: invalid message.\n",
__func__));
return key_senderror(so, m, EINVAL);
}
sport = (struct sadb_x_nat_t_port *)
mhp->ext[SADB_X_EXT_NAT_T_SPORT];
dport = (struct sadb_x_nat_t_port *)
mhp->ext[SADB_X_EXT_NAT_T_DPORT];
if (sport)
KEY_PORTTOSADDR(&saidx.src,
sport->sadb_x_nat_t_port_port);
if (dport)
KEY_PORTTOSADDR(&saidx.dst,
dport->sadb_x_nat_t_port_port);
}
#endif
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_LOCK();
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
LIST_FOREACH(sah, &V_sahtree, chain) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (sah->state == SADB_SASTATE_DEAD)
continue;
if (key_cmpsaidx(&sah->saidx, &saidx, CMP_HEAD) == 0)
continue;
/* Delete all non-LARVAL SAs. */
for (stateidx = 0;
Merge more of currently non-functional (i.e. resolving to whitespace) macros from p4/vimage branch. Do a better job at enclosing all instantiations of globals scheduled for virtualization in #ifdef VIMAGE_GLOBALS blocks. De-virtualize and mark as const saorder_state_alive and saorder_state_any arrays from ipsec code, given that they are never updated at runtime, so virtualizing them would be pointless. Reviewed by: bz, julian Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-11-26 22:32:07 +00:00
stateidx < _ARRAYLEN(saorder_state_alive);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
stateidx++) {
Merge more of currently non-functional (i.e. resolving to whitespace) macros from p4/vimage branch. Do a better job at enclosing all instantiations of globals scheduled for virtualization in #ifdef VIMAGE_GLOBALS blocks. De-virtualize and mark as const saorder_state_alive and saorder_state_any arrays from ipsec code, given that they are never updated at runtime, so virtualizing them would be pointless. Reviewed by: bz, julian Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-11-26 22:32:07 +00:00
state = saorder_state_alive[stateidx];
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (state == SADB_SASTATE_LARVAL)
continue;
for (sav = LIST_FIRST(&sah->savtree[state]);
sav != NULL; sav = nextsav) {
nextsav = LIST_NEXT(sav, chain);
/* sanity check */
if (sav->state != state) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid "
"sav->state (queue %d SA %d)\n",
__func__, state, sav->state));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
continue;
}
key_sa_chgstate(sav, SADB_SASTATE_DEAD);
KEY_FREESAV(&sav);
}
}
}
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_UNLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct mbuf *n;
struct sadb_msg *newmsg;
/* create new sadb_msg to reply. */
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
/* XXX-BZ NAT-T extensions? */
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
n = key_gather_mbuf(m, mhp, 1, 3, SADB_EXT_RESERVED,
SADB_EXT_ADDRESS_SRC, SADB_EXT_ADDRESS_DST);
if (!n)
return key_senderror(so, m, ENOBUFS);
if (n->m_len < sizeof(struct sadb_msg)) {
n = m_pullup(n, sizeof(struct sadb_msg));
if (n == NULL)
return key_senderror(so, m, ENOBUFS);
}
newmsg = mtod(n, struct sadb_msg *);
newmsg->sadb_msg_errno = 0;
newmsg->sadb_msg_len = PFKEY_UNIT64(n->m_pkthdr.len);
m_freem(m);
return key_sendup_mbuf(so, n, KEY_SENDUP_ALL);
}
}
/*
* SADB_GET processing
* receive
* <base, SA(*), address(SD)>
* from the ikmpd, and get a SP and a SA to respond,
* and send,
* <base, SA, (lifetime(HSC),) address(SD), (address(P),) key(AE),
* (identity(SD),) (sensitivity)>
* to the ikmpd.
*
* m will always be freed.
*/
static int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_get(struct socket *so, struct mbuf *m, const struct sadb_msghdr *mhp)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct sadb_sa *sa0;
struct sadb_address *src0, *dst0;
struct secasindex saidx;
struct secashead *sah;
struct secasvar *sav = NULL;
u_int16_t proto;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(so != NULL, ("null socket"));
IPSEC_ASSERT(m != NULL, ("null mbuf"));
IPSEC_ASSERT(mhp != NULL, ("null msghdr"));
IPSEC_ASSERT(mhp->msg != NULL, ("null msg"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* map satype to proto */
if ((proto = key_satype2proto(mhp->msg->sadb_msg_satype)) == 0) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid satype is passed.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
if (mhp->ext[SADB_EXT_SA] == NULL ||
mhp->ext[SADB_EXT_ADDRESS_SRC] == NULL ||
mhp->ext[SADB_EXT_ADDRESS_DST] == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid message is passed.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
if (mhp->extlen[SADB_EXT_SA] < sizeof(struct sadb_sa) ||
mhp->extlen[SADB_EXT_ADDRESS_SRC] < sizeof(struct sadb_address) ||
mhp->extlen[SADB_EXT_ADDRESS_DST] < sizeof(struct sadb_address)) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid message is passed.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
sa0 = (struct sadb_sa *)mhp->ext[SADB_EXT_SA];
src0 = (struct sadb_address *)mhp->ext[SADB_EXT_ADDRESS_SRC];
dst0 = (struct sadb_address *)mhp->ext[SADB_EXT_ADDRESS_DST];
/* XXX boundary check against sa_len */
KEY_SETSECASIDX(proto, IPSEC_MODE_ANY, 0, src0 + 1, dst0 + 1, &saidx);
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
/*
* Make sure the port numbers are zero.
* In case of NAT-T we will update them later if needed.
*/
KEY_PORTTOSADDR(&saidx.src, 0);
KEY_PORTTOSADDR(&saidx.dst, 0);
#ifdef IPSEC_NAT_T
/*
* Handle NAT-T info if present.
*/
if (mhp->ext[SADB_X_EXT_NAT_T_SPORT] != NULL &&
mhp->ext[SADB_X_EXT_NAT_T_DPORT] != NULL) {
struct sadb_x_nat_t_port *sport, *dport;
if (mhp->extlen[SADB_X_EXT_NAT_T_SPORT] < sizeof(*sport) ||
mhp->extlen[SADB_X_EXT_NAT_T_DPORT] < sizeof(*dport)) {
ipseclog((LOG_DEBUG, "%s: invalid message.\n",
__func__));
return key_senderror(so, m, EINVAL);
}
sport = (struct sadb_x_nat_t_port *)
mhp->ext[SADB_X_EXT_NAT_T_SPORT];
dport = (struct sadb_x_nat_t_port *)
mhp->ext[SADB_X_EXT_NAT_T_DPORT];
if (sport)
KEY_PORTTOSADDR(&saidx.src,
sport->sadb_x_nat_t_port_port);
if (dport)
KEY_PORTTOSADDR(&saidx.dst,
dport->sadb_x_nat_t_port_port);
}
#endif
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* get a SA header */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_LOCK();
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
LIST_FOREACH(sah, &V_sahtree, chain) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (sah->state == SADB_SASTATE_DEAD)
continue;
if (key_cmpsaidx(&sah->saidx, &saidx, CMP_HEAD) == 0)
continue;
/* get a SA with SPI. */
sav = key_getsavbyspi(sah, sa0->sadb_sa_spi);
if (sav)
break;
}
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_UNLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (sah == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: no SA found.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, ENOENT);
}
{
struct mbuf *n;
u_int8_t satype;
/* map proto to satype */
if ((satype = key_proto2satype(sah->saidx.proto)) == 0) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: there was invalid proto in SAD.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
/* create new sadb_msg to reply. */
n = key_setdumpsa(sav, SADB_GET, satype, mhp->msg->sadb_msg_seq,
mhp->msg->sadb_msg_pid);
if (!n)
return key_senderror(so, m, ENOBUFS);
m_freem(m);
return key_sendup_mbuf(so, n, KEY_SENDUP_ONE);
}
}
/* XXX make it sysctl-configurable? */
static void
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_getcomb_setlifetime(struct sadb_comb *comb)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
comb->sadb_comb_soft_allocations = 1;
comb->sadb_comb_hard_allocations = 1;
comb->sadb_comb_soft_bytes = 0;
comb->sadb_comb_hard_bytes = 0;
comb->sadb_comb_hard_addtime = 86400; /* 1 day */
comb->sadb_comb_soft_addtime = comb->sadb_comb_soft_addtime * 80 / 100;
comb->sadb_comb_soft_usetime = 28800; /* 8 hours */
comb->sadb_comb_hard_usetime = comb->sadb_comb_hard_usetime * 80 / 100;
}
/*
* XXX reorder combinations by preference
* XXX no idea if the user wants ESP authentication or not
*/
static struct mbuf *
key_getcomb_esp()
{
struct sadb_comb *comb;
struct enc_xform *algo;
struct mbuf *result = NULL, *m, *n;
int encmin;
int i, off, o;
int totlen;
const int l = PFKEY_ALIGN8(sizeof(struct sadb_comb));
m = NULL;
for (i = 1; i <= SADB_EALG_MAX; i++) {
algo = esp_algorithm_lookup(i);
if (algo == NULL)
continue;
/* discard algorithms with key size smaller than system min */
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
if (_BITS(algo->maxkey) < V_ipsec_esp_keymin)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
continue;
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
if (_BITS(algo->minkey) < V_ipsec_esp_keymin)
encmin = V_ipsec_esp_keymin;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
else
encmin = _BITS(algo->minkey);
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
if (V_ipsec_esp_auth)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
m = key_getcomb_ah();
else {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(l <= MLEN,
("l=%u > MLEN=%lu", l, (u_long) MLEN));
Mechanically substitute flags from historic mbuf allocator with malloc(9) flags within sys. Exceptions: - sys/contrib not touched - sys/mbuf.h edited manually
2012-12-05 08:04:20 +00:00
MGET(m, M_NOWAIT, MT_DATA);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (m) {
M_ALIGN(m, l);
m->m_len = l;
m->m_next = NULL;
bzero(mtod(m, caddr_t), m->m_len);
}
}
if (!m)
goto fail;
totlen = 0;
for (n = m; n; n = n->m_next)
totlen += n->m_len;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT((totlen % l) == 0, ("totlen=%u, l=%u", totlen, l));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
for (off = 0; off < totlen; off += l) {
n = m_pulldown(m, off, l, &o);
if (!n) {
/* m is already freed */
goto fail;
}
comb = (struct sadb_comb *)(mtod(n, caddr_t) + o);
bzero(comb, sizeof(*comb));
key_getcomb_setlifetime(comb);
comb->sadb_comb_encrypt = i;
comb->sadb_comb_encrypt_minbits = encmin;
comb->sadb_comb_encrypt_maxbits = _BITS(algo->maxkey);
}
if (!result)
result = m;
else
m_cat(result, m);
}
return result;
fail:
if (result)
m_freem(result);
return NULL;
}
static void
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_getsizes_ah(const struct auth_hash *ah, int alg, u_int16_t* min,
u_int16_t* max)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
Step 1.5 of importing the network stack virtualization infrastructure from the vimage project, as per plan established at devsummit 08/08: http://wiki.freebsd.org/Image/Notes200808DevSummit Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator macros, and CURVNET_SET() context setting macros, all currently resolving to NOPs. Prepare for virtualization of selected SYSCTL objects by introducing a family of SYSCTL_V_*() macros, currently resolving to their global counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT(). Move selected #defines from sys/sys/vimage.h to newly introduced header files specific to virtualized subsystems (sys/net/vnet.h, sys/netinet/vinet.h etc.). All the changes are verified to have zero functional impact at this point in time by doing MD5 comparision between pre- and post-change object files(*). (*) netipsec/keysock.c did not validate depending on compile time options. Implemented by: julian, bz, brooks, zec Reviewed by: julian, bz, brooks, kris, rwatson, ... Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
*min = *max = ah->keysize;
if (ah->keysize == 0) {
/*
* Transform takes arbitrary key size but algorithm
* key size is restricted. Enforce this here.
*/
switch (alg) {
case SADB_X_AALG_MD5: *min = *max = 16; break;
case SADB_X_AALG_SHA: *min = *max = 20; break;
case SADB_X_AALG_NULL: *min = 1; *max = 256; break;
Fixed IPsec's HMAC_SHA256-512 support to be RFC4868 compliant. This will break interoperability with all older versions of FreeBSD for those algorithms. Reviewed by: bz, gnn Obtained from: NETASQ MFC after: 1w
2011-02-18 09:40:13 +00:00
case SADB_X_AALG_SHA2_256: *min = *max = 32; break;
case SADB_X_AALG_SHA2_384: *min = *max = 48; break;
case SADB_X_AALG_SHA2_512: *min = *max = 64; break;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
default:
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: unknown AH algorithm %u\n",
__func__, alg));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
break;
}
}
}
/*
* XXX reorder combinations by preference
*/
static struct mbuf *
key_getcomb_ah()
{
struct sadb_comb *comb;
struct auth_hash *algo;
struct mbuf *m;
u_int16_t minkeysize, maxkeysize;
int i;
const int l = PFKEY_ALIGN8(sizeof(struct sadb_comb));
m = NULL;
for (i = 1; i <= SADB_AALG_MAX; i++) {
#if 1
/* we prefer HMAC algorithms, not old algorithms */
Fixed IPsec's HMAC_SHA256-512 support to be RFC4868 compliant. This will break interoperability with all older versions of FreeBSD for those algorithms. Reviewed by: bz, gnn Obtained from: NETASQ MFC after: 1w
2011-02-18 09:40:13 +00:00
if (i != SADB_AALG_SHA1HMAC &&
i != SADB_AALG_MD5HMAC &&
i != SADB_X_AALG_SHA2_256 &&
i != SADB_X_AALG_SHA2_384 &&
i != SADB_X_AALG_SHA2_512)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
continue;
#endif
algo = ah_algorithm_lookup(i);
if (!algo)
continue;
key_getsizes_ah(algo, i, &minkeysize, &maxkeysize);
/* discard algorithms with key size smaller than system min */
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
if (_BITS(minkeysize) < V_ipsec_ah_keymin)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
continue;
if (!m) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(l <= MLEN,
("l=%u > MLEN=%lu", l, (u_long) MLEN));
Mechanically substitute flags from historic mbuf allocator with malloc(9) flags within sys. Exceptions: - sys/contrib not touched - sys/mbuf.h edited manually
2012-12-05 08:04:20 +00:00
MGET(m, M_NOWAIT, MT_DATA);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (m) {
M_ALIGN(m, l);
m->m_len = l;
m->m_next = NULL;
}
} else
Mechanically substitute flags from historic mbuf allocator with malloc(9) flags within sys. Exceptions: - sys/contrib not touched - sys/mbuf.h edited manually
2012-12-05 08:04:20 +00:00
M_PREPEND(m, l, M_NOWAIT);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (!m)
return NULL;
comb = mtod(m, struct sadb_comb *);
bzero(comb, sizeof(*comb));
key_getcomb_setlifetime(comb);
comb->sadb_comb_auth = i;
comb->sadb_comb_auth_minbits = _BITS(minkeysize);
comb->sadb_comb_auth_maxbits = _BITS(maxkeysize);
}
return m;
}
/*
* not really an official behavior. discussed in pf_key@inner.net in Sep2000.
* XXX reorder combinations by preference
*/
static struct mbuf *
key_getcomb_ipcomp()
{
struct sadb_comb *comb;
struct comp_algo *algo;
struct mbuf *m;
int i;
const int l = PFKEY_ALIGN8(sizeof(struct sadb_comb));
m = NULL;
for (i = 1; i <= SADB_X_CALG_MAX; i++) {
algo = ipcomp_algorithm_lookup(i);
if (!algo)
continue;
if (!m) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(l <= MLEN,
("l=%u > MLEN=%lu", l, (u_long) MLEN));
Mechanically substitute flags from historic mbuf allocator with malloc(9) flags within sys. Exceptions: - sys/contrib not touched - sys/mbuf.h edited manually
2012-12-05 08:04:20 +00:00
MGET(m, M_NOWAIT, MT_DATA);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (m) {
M_ALIGN(m, l);
m->m_len = l;
m->m_next = NULL;
}
} else
Mechanically substitute flags from historic mbuf allocator with malloc(9) flags within sys. Exceptions: - sys/contrib not touched - sys/mbuf.h edited manually
2012-12-05 08:04:20 +00:00
M_PREPEND(m, l, M_NOWAIT);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (!m)
return NULL;
comb = mtod(m, struct sadb_comb *);
bzero(comb, sizeof(*comb));
key_getcomb_setlifetime(comb);
comb->sadb_comb_encrypt = i;
/* what should we set into sadb_comb_*_{min,max}bits? */
}
return m;
}
/*
* XXX no way to pass mode (transport/tunnel) to userland
* XXX replay checking?
* XXX sysctl interface to ipsec_{ah,esp}_keymin
*/
static struct mbuf *
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_getprop(const struct secasindex *saidx)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct sadb_prop *prop;
struct mbuf *m, *n;
const int l = PFKEY_ALIGN8(sizeof(struct sadb_prop));
int totlen;
switch (saidx->proto) {
case IPPROTO_ESP:
m = key_getcomb_esp();
break;
case IPPROTO_AH:
m = key_getcomb_ah();
break;
case IPPROTO_IPCOMP:
m = key_getcomb_ipcomp();
break;
default:
return NULL;
}
if (!m)
return NULL;
Mechanically substitute flags from historic mbuf allocator with malloc(9) flags within sys. Exceptions: - sys/contrib not touched - sys/mbuf.h edited manually
2012-12-05 08:04:20 +00:00
M_PREPEND(m, l, M_NOWAIT);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (!m)
return NULL;
totlen = 0;
for (n = m; n; n = n->m_next)
totlen += n->m_len;
prop = mtod(m, struct sadb_prop *);
bzero(prop, sizeof(*prop));
prop->sadb_prop_len = PFKEY_UNIT64(totlen);
prop->sadb_prop_exttype = SADB_EXT_PROPOSAL;
prop->sadb_prop_replay = 32; /* XXX */
return m;
}
/*
* SADB_ACQUIRE processing called by key_checkrequest() and key_acquire2().
* send
* <base, SA, address(SD), (address(P)), x_policy,
* (identity(SD),) (sensitivity,) proposal>
* to KMD, and expect to receive
* <base> with SADB_ACQUIRE if error occured,
* or
* <base, src address, dst address, (SPI range)> with SADB_GETSPI
* from KMD by PF_KEY.
*
* XXX x_policy is outside of RFC2367 (KAME extension).
* XXX sensitivity is not supported.
* XXX for ipcomp, RFC2367 does not define how to fill in proposal.
* see comment for key_getcomb_ipcomp().
*
* OUT:
* 0 : succeed
* others: error number
*/
static int
key_acquire(const struct secasindex *saidx, struct secpolicy *sp)
{
Fill the port and protocol information in the SADB_ACQUIRE message in case when security policy has it as required by RFC 2367. PR: 192774 Differential Revision: https://reviews.freebsd.org/D2972 MFC after: 1 week
2015-07-06 12:40:31 +00:00
union sockaddr_union addr;
struct mbuf *result, *m;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
struct secacq *newacq;
u_int32_t seq;
Fill the port and protocol information in the SADB_ACQUIRE message in case when security policy has it as required by RFC 2367. PR: 192774 Differential Revision: https://reviews.freebsd.org/D2972 MFC after: 1 week
2015-07-06 12:40:31 +00:00
int error;
u_int16_t ul_proto;
u_int8_t mask, satype;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(saidx != NULL, ("null saidx"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
satype = key_proto2satype(saidx->proto);
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(satype != 0, ("null satype, protocol %u", saidx->proto));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Fill the port and protocol information in the SADB_ACQUIRE message in case when security policy has it as required by RFC 2367. PR: 192774 Differential Revision: https://reviews.freebsd.org/D2972 MFC after: 1 week
2015-07-06 12:40:31 +00:00
error = -1;
result = NULL;
ul_proto = IPSEC_ULPROTO_ANY;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/*
* We never do anything about acquirng SA. There is anather
* solution that kernel blocks to send SADB_ACQUIRE message until
* getting something message from IKEd. In later case, to be
* managed with ACQUIRING list.
*/
Correct typos, mostly s/ a / an / where appropriate. Some whitespace cleanup, especially in troff files.
2003-01-01 18:49:04 +00:00
/* Get an entry to check whether sending message or not. */
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if ((newacq = key_getacq(saidx)) != NULL) {
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
if (V_key_blockacq_count < newacq->count) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* reset counter and do send message. */
newacq->count = 0;
} else {
/* increment counter and do nothing. */
newacq->count++;
return 0;
}
} else {
/* make new entry for blocking to send SADB_ACQUIRE. */
if ((newacq = key_newacq(saidx)) == NULL)
return ENOBUFS;
}
seq = newacq->seq;
m = key_setsadbmsg(SADB_ACQUIRE, 0, satype, seq, 0, 0);
if (!m) {
error = ENOBUFS;
goto fail;
}
result = m;
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
/*
* No SADB_X_EXT_NAT_T_* here: we do not know
* anything related to NAT-T at this time.
*/
Fill the port and protocol information in the SADB_ACQUIRE message in case when security policy has it as required by RFC 2367. PR: 192774 Differential Revision: https://reviews.freebsd.org/D2972 MFC after: 1 week
2015-07-06 12:40:31 +00:00
/*
* set sadb_address for saidx's.
*
* Note that if sp is supplied, then we're being called from
* key_checkrequest and should supply port and protocol information.
*/
if (sp != NULL && (sp->spidx.ul_proto == IPPROTO_TCP ||
sp->spidx.ul_proto == IPPROTO_UDP))
ul_proto = sp->spidx.ul_proto;
addr = saidx->src;
mask = FULLMASK;
if (ul_proto != IPSEC_ULPROTO_ANY) {
switch (sp->spidx.src.sa.sa_family) {
case AF_INET:
if (sp->spidx.src.sin.sin_port != IPSEC_PORT_ANY) {
addr.sin.sin_port = sp->spidx.src.sin.sin_port;
mask = sp->spidx.prefs;
}
break;
case AF_INET6:
if (sp->spidx.src.sin6.sin6_port != IPSEC_PORT_ANY) {
addr.sin6.sin6_port = sp->spidx.src.sin6.sin6_port;
mask = sp->spidx.prefs;
}
break;
default:
break;
}
}
m = key_setsadbaddr(SADB_EXT_ADDRESS_SRC, &addr.sa, mask, ul_proto);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (!m) {
error = ENOBUFS;
goto fail;
}
m_cat(result, m);
Fill the port and protocol information in the SADB_ACQUIRE message in case when security policy has it as required by RFC 2367. PR: 192774 Differential Revision: https://reviews.freebsd.org/D2972 MFC after: 1 week
2015-07-06 12:40:31 +00:00
addr = saidx->dst;
mask = FULLMASK;
if (ul_proto != IPSEC_ULPROTO_ANY) {
switch (sp->spidx.dst.sa.sa_family) {
case AF_INET:
if (sp->spidx.dst.sin.sin_port != IPSEC_PORT_ANY) {
addr.sin.sin_port = sp->spidx.dst.sin.sin_port;
mask = sp->spidx.prefd;
}
break;
case AF_INET6:
if (sp->spidx.dst.sin6.sin6_port != IPSEC_PORT_ANY) {
addr.sin6.sin6_port = sp->spidx.dst.sin6.sin6_port;
mask = sp->spidx.prefd;
}
break;
default:
break;
}
}
m = key_setsadbaddr(SADB_EXT_ADDRESS_DST, &addr.sa, mask, ul_proto);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (!m) {
error = ENOBUFS;
goto fail;
}
m_cat(result, m);
/* XXX proxy address (optional) */
/* set sadb_x_policy */
if (sp) {
m = key_setsadbxpolicy(sp->policy, sp->spidx.dir, sp->id);
if (!m) {
error = ENOBUFS;
goto fail;
}
m_cat(result, m);
}
/* XXX identity (optional) */
#if 0
if (idexttype && fqdn) {
/* create identity extension (FQDN) */
struct sadb_ident *id;
int fqdnlen;
fqdnlen = strlen(fqdn) + 1; /* +1 for terminating-NUL */
id = (struct sadb_ident *)p;
bzero(id, sizeof(*id) + PFKEY_ALIGN8(fqdnlen));
id->sadb_ident_len = PFKEY_UNIT64(sizeof(*id) + PFKEY_ALIGN8(fqdnlen));
id->sadb_ident_exttype = idexttype;
id->sadb_ident_type = SADB_IDENTTYPE_FQDN;
bcopy(fqdn, id + 1, fqdnlen);
p += sizeof(struct sadb_ident) + PFKEY_ALIGN8(fqdnlen);
}
if (idexttype) {
/* create identity extension (USERFQDN) */
struct sadb_ident *id;
int userfqdnlen;
if (userfqdn) {
/* +1 for terminating-NUL */
userfqdnlen = strlen(userfqdn) + 1;
} else
userfqdnlen = 0;
id = (struct sadb_ident *)p;
bzero(id, sizeof(*id) + PFKEY_ALIGN8(userfqdnlen));
id->sadb_ident_len = PFKEY_UNIT64(sizeof(*id) + PFKEY_ALIGN8(userfqdnlen));
id->sadb_ident_exttype = idexttype;
id->sadb_ident_type = SADB_IDENTTYPE_USERFQDN;
/* XXX is it correct? */
if (curproc && curproc->p_cred)
id->sadb_ident_id = curproc->p_cred->p_ruid;
if (userfqdn && userfqdnlen)
bcopy(userfqdn, id + 1, userfqdnlen);
p += sizeof(struct sadb_ident) + PFKEY_ALIGN8(userfqdnlen);
}
#endif
/* XXX sensitivity (optional) */
/* create proposal/combination extension */
m = key_getprop(saidx);
#if 0
/*
* spec conformant: always attach proposal/combination extension,
* the problem is that we have no way to attach it for ipcomp,
* due to the way sadb_comb is declared in RFC2367.
*/
if (!m) {
error = ENOBUFS;
goto fail;
}
m_cat(result, m);
#else
/*
* outside of spec; make proposal/combination extension optional.
*/
if (m)
m_cat(result, m);
#endif
if ((result->m_flags & M_PKTHDR) == 0) {
error = EINVAL;
goto fail;
}
if (result->m_len < sizeof(struct sadb_msg)) {
result = m_pullup(result, sizeof(struct sadb_msg));
if (result == NULL) {
error = ENOBUFS;
goto fail;
}
}
result->m_pkthdr.len = 0;
for (m = result; m; m = m->m_next)
result->m_pkthdr.len += m->m_len;
mtod(result, struct sadb_msg *)->sadb_msg_len =
PFKEY_UNIT64(result->m_pkthdr.len);
return key_sendup_mbuf(NULL, result, KEY_SENDUP_REGISTERED);
fail:
if (result)
m_freem(result);
return error;
}
static struct secacq *
key_newacq(const struct secasindex *saidx)
{
struct secacq *newacq;
/* get new entry */
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
newacq = malloc(sizeof(struct secacq), M_IPSEC_SAQ, M_NOWAIT|M_ZERO);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (newacq == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: No more memory.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return NULL;
}
/* copy secindex */
bcopy(saidx, &newacq->saidx, sizeof(newacq->saidx));
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
newacq->seq = (V_acq_seq == ~0 ? 1 : ++V_acq_seq);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
newacq->created = time_second;
newacq->count = 0;
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
/* add to acqtree */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ACQ_LOCK();
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
LIST_INSERT_HEAD(&V_acqtree, newacq, chain);
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ACQ_UNLOCK();
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return newacq;
}
static struct secacq *
key_getacq(const struct secasindex *saidx)
{
struct secacq *acq;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ACQ_LOCK();
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
LIST_FOREACH(acq, &V_acqtree, chain) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (key_cmpsaidx(saidx, &acq->saidx, CMP_EXACTLY))
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
break;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ACQ_UNLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
return acq;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
static struct secacq *
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_getacqbyseq(u_int32_t seq)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct secacq *acq;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ACQ_LOCK();
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
LIST_FOREACH(acq, &V_acqtree, chain) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (acq->seq == seq)
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
break;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ACQ_UNLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
return acq;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
static struct secspacq *
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_newspacq(struct secpolicyindex *spidx)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct secspacq *acq;
/* get new entry */
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
acq = malloc(sizeof(struct secspacq), M_IPSEC_SAQ, M_NOWAIT|M_ZERO);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (acq == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: No more memory.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return NULL;
}
/* copy secindex */
bcopy(spidx, &acq->spidx, sizeof(acq->spidx));
acq->created = time_second;
acq->count = 0;
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
/* add to spacqtree */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SPACQ_LOCK();
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
LIST_INSERT_HEAD(&V_spacqtree, acq, chain);
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SPACQ_UNLOCK();
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return acq;
}
static struct secspacq *
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_getspacq(struct secpolicyindex *spidx)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct secspacq *acq;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SPACQ_LOCK();
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
LIST_FOREACH(acq, &V_spacqtree, chain) {
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
if (key_cmpspidx_exactly(spidx, &acq->spidx)) {
/* NB: return holding spacq_lock */
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return acq;
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SPACQ_UNLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return NULL;
}
/*
* SADB_ACQUIRE processing,
* in first situation, is receiving
* <base>
* from the ikmpd, and clear sequence of its secasvar entry.
*
* In second situation, is receiving
* <base, address(SD), (address(P),) (identity(SD),) (sensitivity,) proposal>
* from a user land process, and return
* <base, address(SD), (address(P),) (identity(SD),) (sensitivity,) proposal>
* to the socket.
*
* m will always be freed.
*/
static int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_acquire2(struct socket *so, struct mbuf *m, const struct sadb_msghdr *mhp)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
const struct sadb_address *src0, *dst0;
struct secasindex saidx;
struct secashead *sah;
u_int16_t proto;
int error;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(so != NULL, ("null socket"));
IPSEC_ASSERT(m != NULL, ("null mbuf"));
IPSEC_ASSERT(mhp != NULL, ("null msghdr"));
IPSEC_ASSERT(mhp->msg != NULL, ("null msg"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/*
* Error message from KMd.
* We assume that if error was occured in IKEd, the length of PFKEY
* message is equal to the size of sadb_msg structure.
* We do not raise error even if error occured in this function.
*/
if (mhp->msg->sadb_msg_len == PFKEY_UNIT64(sizeof(struct sadb_msg))) {
struct secacq *acq;
/* check sequence number */
if (mhp->msg->sadb_msg_seq == 0) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: must specify sequence "
"number.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
m_freem(m);
return 0;
}
if ((acq = key_getacqbyseq(mhp->msg->sadb_msg_seq)) == NULL) {
/*
* the specified larval SA is already gone, or we got
* a bogus sequence number. we can silently ignore it.
*/
m_freem(m);
return 0;
}
/* reset acq counter in order to deletion by timehander. */
acq->created = time_second;
acq->count = 0;
m_freem(m);
return 0;
}
/*
* This message is from user land.
*/
/* map satype to proto */
if ((proto = key_satype2proto(mhp->msg->sadb_msg_satype)) == 0) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid satype is passed.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
if (mhp->ext[SADB_EXT_ADDRESS_SRC] == NULL ||
mhp->ext[SADB_EXT_ADDRESS_DST] == NULL ||
mhp->ext[SADB_EXT_PROPOSAL] == NULL) {
/* error */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid message is passed.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
if (mhp->extlen[SADB_EXT_ADDRESS_SRC] < sizeof(struct sadb_address) ||
mhp->extlen[SADB_EXT_ADDRESS_DST] < sizeof(struct sadb_address) ||
mhp->extlen[SADB_EXT_PROPOSAL] < sizeof(struct sadb_prop)) {
/* error */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid message is passed.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
src0 = (struct sadb_address *)mhp->ext[SADB_EXT_ADDRESS_SRC];
dst0 = (struct sadb_address *)mhp->ext[SADB_EXT_ADDRESS_DST];
/* XXX boundary check against sa_len */
KEY_SETSECASIDX(proto, IPSEC_MODE_ANY, 0, src0 + 1, dst0 + 1, &saidx);
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
/*
* Make sure the port numbers are zero.
* In case of NAT-T we will update them later if needed.
*/
KEY_PORTTOSADDR(&saidx.src, 0);
KEY_PORTTOSADDR(&saidx.dst, 0);
#ifndef IPSEC_NAT_T
/*
* Handle NAT-T info if present.
*/
if (mhp->ext[SADB_X_EXT_NAT_T_SPORT] != NULL &&
mhp->ext[SADB_X_EXT_NAT_T_DPORT] != NULL) {
struct sadb_x_nat_t_port *sport, *dport;
if (mhp->extlen[SADB_X_EXT_NAT_T_SPORT] < sizeof(*sport) ||
mhp->extlen[SADB_X_EXT_NAT_T_DPORT] < sizeof(*dport)) {
ipseclog((LOG_DEBUG, "%s: invalid message.\n",
__func__));
return key_senderror(so, m, EINVAL);
}
sport = (struct sadb_x_nat_t_port *)
mhp->ext[SADB_X_EXT_NAT_T_SPORT];
dport = (struct sadb_x_nat_t_port *)
mhp->ext[SADB_X_EXT_NAT_T_DPORT];
if (sport)
KEY_PORTTOSADDR(&saidx.src,
sport->sadb_x_nat_t_port_port);
if (dport)
KEY_PORTTOSADDR(&saidx.dst,
dport->sadb_x_nat_t_port_port);
}
#endif
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* get a SA index */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_LOCK();
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
LIST_FOREACH(sah, &V_sahtree, chain) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (sah->state == SADB_SASTATE_DEAD)
continue;
if (key_cmpsaidx(&sah->saidx, &saidx, CMP_MODE_REQID))
break;
}
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_UNLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (sah != NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: a SA exists already.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EEXIST);
}
error = key_acquire(&saidx, NULL);
if (error != 0) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: error %d returned from key_acquire\n",
__func__, mhp->msg->sadb_msg_errno));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, error);
}
return key_sendup_mbuf(so, m, KEY_SENDUP_REGISTERED);
}
/*
* SADB_REGISTER processing.
* If SATYPE_UNSPEC has been passed as satype, only return sabd_supported.
* receive
* <base>
* from the ikmpd, and register a socket to send PF_KEY messages,
* and send
* <base, supported>
* to KMD by PF_KEY.
* If socket is detached, must free from regnode.
*
* m will always be freed.
*/
static int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_register(struct socket *so, struct mbuf *m, const struct sadb_msghdr *mhp)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct secreg *reg, *newreg = 0;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(so != NULL, ("null socket"));
IPSEC_ASSERT(m != NULL, ("null mbuf"));
IPSEC_ASSERT(mhp != NULL, ("null msghdr"));
IPSEC_ASSERT(mhp->msg != NULL, ("null msg"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* check for invalid register message */
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
if (mhp->msg->sadb_msg_satype >= sizeof(V_regtree)/sizeof(V_regtree[0]))
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
/* When SATYPE_UNSPEC is specified, only return sabd_supported. */
if (mhp->msg->sadb_msg_satype == SADB_SATYPE_UNSPEC)
goto setmsg;
/* check whether existing or not */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
REGTREE_LOCK();
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
LIST_FOREACH(reg, &V_regtree[mhp->msg->sadb_msg_satype], chain) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (reg->so == so) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
REGTREE_UNLOCK();
ipseclog((LOG_DEBUG, "%s: socket exists already.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EEXIST);
}
}
/* create regnode */
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
newreg = malloc(sizeof(struct secreg), M_IPSEC_SAR, M_NOWAIT|M_ZERO);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (newreg == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
REGTREE_UNLOCK();
ipseclog((LOG_DEBUG, "%s: No more memory.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, ENOBUFS);
}
newreg->so = so;
((struct keycb *)sotorawcb(so))->kp_registered++;
/* add regnode to regtree. */
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
LIST_INSERT_HEAD(&V_regtree[mhp->msg->sadb_msg_satype], newreg, chain);
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
REGTREE_UNLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
setmsg:
{
struct mbuf *n;
struct sadb_msg *newmsg;
struct sadb_supported *sup;
u_int len, alen, elen;
int off;
int i;
struct sadb_alg *alg;
/* create new sadb_msg to reply. */
alen = 0;
for (i = 1; i <= SADB_AALG_MAX; i++) {
if (ah_algorithm_lookup(i))
alen += sizeof(struct sadb_alg);
}
if (alen)
alen += sizeof(struct sadb_supported);
elen = 0;
for (i = 1; i <= SADB_EALG_MAX; i++) {
if (esp_algorithm_lookup(i))
elen += sizeof(struct sadb_alg);
}
if (elen)
elen += sizeof(struct sadb_supported);
len = sizeof(struct sadb_msg) + alen + elen;
if (len > MCLBYTES)
return key_senderror(so, m, ENOBUFS);
Mechanically substitute flags from historic mbuf allocator with malloc(9) flags within sys. Exceptions: - sys/contrib not touched - sys/mbuf.h edited manually
2012-12-05 08:04:20 +00:00
MGETHDR(n, M_NOWAIT, MT_DATA);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (len > MHLEN) {
In order to reduce use of M_EXT outside of the mbuf allocator and socket-buffer implementations, introduce a return value for MCLGET() (and m_cljget() that underlies it) to allow the caller to avoid testing M_EXT itself. Update all callers to use the return value. With this change, very few network device drivers remain aware of M_EXT; the primary exceptions lie in mbuf-chain pretty printers for debugging, and in a few cases, custom mbuf and cluster allocation implementations. NB: This is a difficult-to-test change as it touches many drivers for which I don't have physical devices. Instead we've gone for intensive review, but further post-commit review would definitely be appreciated to spot errors where changes could not easily be made mechanically, but were largely mechanical in nature. Differential Revision: https://reviews.freebsd.org/D1440 Reviewed by: adrian, bz, gnn Sponsored by: EMC / Isilon Storage Division
2015-01-06 12:59:37 +00:00
if (!(MCLGET(n, M_NOWAIT))) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
m_freem(n);
n = NULL;
}
}
if (!n)
return key_senderror(so, m, ENOBUFS);
n->m_pkthdr.len = n->m_len = len;
n->m_next = NULL;
off = 0;
m_copydata(m, 0, sizeof(struct sadb_msg), mtod(n, caddr_t) + off);
newmsg = mtod(n, struct sadb_msg *);
newmsg->sadb_msg_errno = 0;
newmsg->sadb_msg_len = PFKEY_UNIT64(len);
off += PFKEY_ALIGN8(sizeof(struct sadb_msg));
/* for authentication algorithm */
if (alen) {
sup = (struct sadb_supported *)(mtod(n, caddr_t) + off);
sup->sadb_supported_len = PFKEY_UNIT64(alen);
sup->sadb_supported_exttype = SADB_EXT_SUPPORTED_AUTH;
off += PFKEY_ALIGN8(sizeof(*sup));
for (i = 1; i <= SADB_AALG_MAX; i++) {
struct auth_hash *aalgo;
u_int16_t minkeysize, maxkeysize;
aalgo = ah_algorithm_lookup(i);
if (!aalgo)
continue;
alg = (struct sadb_alg *)(mtod(n, caddr_t) + off);
alg->sadb_alg_id = i;
alg->sadb_alg_ivlen = 0;
key_getsizes_ah(aalgo, i, &minkeysize, &maxkeysize);
alg->sadb_alg_minbits = _BITS(minkeysize);
alg->sadb_alg_maxbits = _BITS(maxkeysize);
off += PFKEY_ALIGN8(sizeof(*alg));
}
}
/* for encryption algorithm */
if (elen) {
sup = (struct sadb_supported *)(mtod(n, caddr_t) + off);
sup->sadb_supported_len = PFKEY_UNIT64(elen);
sup->sadb_supported_exttype = SADB_EXT_SUPPORTED_ENCRYPT;
off += PFKEY_ALIGN8(sizeof(*sup));
for (i = 1; i <= SADB_EALG_MAX; i++) {
struct enc_xform *ealgo;
ealgo = esp_algorithm_lookup(i);
if (!ealgo)
continue;
alg = (struct sadb_alg *)(mtod(n, caddr_t) + off);
alg->sadb_alg_id = i;
alg->sadb_alg_ivlen = ealgo->blocksize;
alg->sadb_alg_minbits = _BITS(ealgo->minkey);
alg->sadb_alg_maxbits = _BITS(ealgo->maxkey);
off += PFKEY_ALIGN8(sizeof(struct sadb_alg));
}
}
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(off == len,
("length assumption failed (off %u len %u)", off, len));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
m_freem(m);
return key_sendup_mbuf(so, n, KEY_SENDUP_REGISTERED);
}
}
/*
* free secreg entry registered.
* XXX: I want to do free a socket marked done SADB_RESIGER to socket.
*/
void
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
key_freereg(struct socket *so)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct secreg *reg;
int i;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(so != NULL, ("NULL so"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/*
* check whether existing or not.
* check all type of SA, because there is a potential that
* one socket is registered to multiple type of SA.
*/
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
REGTREE_LOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
for (i = 0; i <= SADB_SATYPE_MAX; i++) {
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
LIST_FOREACH(reg, &V_regtree[i], chain) {
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
if (reg->so == so && __LIST_CHAINED(reg)) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
LIST_REMOVE(reg, chain);
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
free(reg, M_IPSEC_SAR);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
break;
}
}
}
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
REGTREE_UNLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
/*
* SADB_EXPIRE processing
* send
* <base, SA, SA2, lifetime(C and one of HS), address(SD)>
* to KMD by PF_KEY.
* NOTE: We send only soft lifetime extension.
*
* OUT: 0 : succeed
* others : error number
*/
static int
Teach key_expire() send SADB_EXPIRE message with the SADB_EXT_LIFETIME_HARD extension header type. The key_flush_sad() now will send SADB_EXPIRE message when HARD lifetime expires. This is required by RFC 2367 and some keying daemons rely on these messages. HARD lifetime messages have precedence over SOFT lifetime messages, so now they will be checked first. Also now SADB_EXPIRE messages will be send even the SA has not been used, because keying daemons might want to rekey such SA. PR: 200282, 200283 Submitted by: Tobias Brunner <tobias at strongswan dot org> MFC after: 2 weeks
2015-05-19 08:30:04 +00:00
key_expire(struct secasvar *sav, int hard)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
int satype;
struct mbuf *result = NULL, *m;
int len;
int error = -1;
struct sadb_lifetime *lt;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT (sav != NULL, ("null sav"));
IPSEC_ASSERT (sav->sah != NULL, ("null sa header"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* set msg header */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
satype = key_proto2satype(sav->sah->saidx.proto);
IPSEC_ASSERT(satype != 0, ("invalid proto, satype %u", satype));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
m = key_setsadbmsg(SADB_EXPIRE, 0, satype, sav->seq, 0, sav->refcnt);
if (!m) {
error = ENOBUFS;
goto fail;
}
result = m;
/* create SA extension */
m = key_setsadbsa(sav);
if (!m) {
error = ENOBUFS;
goto fail;
}
m_cat(result, m);
/* create SA extension */
m = key_setsadbxsa2(sav->sah->saidx.mode,
sav->replay ? sav->replay->count : 0,
sav->sah->saidx.reqid);
if (!m) {
error = ENOBUFS;
goto fail;
}
m_cat(result, m);
/* create lifetime extension (current and soft) */
len = PFKEY_ALIGN8(sizeof(*lt)) * 2;
Use m_get2() + m_align() instead of hand made key_alloc_mbuf(). Code examination shows, that although key_alloc_mbuf() could return chains, the callers never use chains, so m_get2() should suffice. Sponsored by: Nginx, Inc.
2013-03-15 10:20:15 +00:00
m = m_get2(len, M_NOWAIT, MT_DATA, 0);
if (m == NULL) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = ENOBUFS;
goto fail;
}
Use m_get2() + m_align() instead of hand made key_alloc_mbuf(). Code examination shows, that although key_alloc_mbuf() could return chains, the callers never use chains, so m_get2() should suffice. Sponsored by: Nginx, Inc.
2013-03-15 10:20:15 +00:00
m_align(m, len);
m->m_len = len;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
bzero(mtod(m, caddr_t), len);
lt = mtod(m, struct sadb_lifetime *);
lt->sadb_lifetime_len = PFKEY_UNIT64(sizeof(struct sadb_lifetime));
lt->sadb_lifetime_exttype = SADB_EXT_LIFETIME_CURRENT;
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
lt->sadb_lifetime_allocations = sav->lft_c->allocations;
lt->sadb_lifetime_bytes = sav->lft_c->bytes;
lt->sadb_lifetime_addtime = sav->lft_c->addtime;
lt->sadb_lifetime_usetime = sav->lft_c->usetime;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
lt = (struct sadb_lifetime *)(mtod(m, caddr_t) + len / 2);
Fix bugs when allocating and passing information of current lifetime and soft lifetime [1] introduced in rev. 1.21 of key.c. Along with that, fix a related problem in key_debug printing the correct data. While there replace a printf by panic in a sanity check. PR: 120751 Submitted by: Kazuaki ODA (kazuaki aliceblue.jp) [1] MFC after: 5 days
2008-03-02 17:12:28 +00:00
lt->sadb_lifetime_len = PFKEY_UNIT64(sizeof(struct sadb_lifetime));
Teach key_expire() send SADB_EXPIRE message with the SADB_EXT_LIFETIME_HARD extension header type. The key_flush_sad() now will send SADB_EXPIRE message when HARD lifetime expires. This is required by RFC 2367 and some keying daemons rely on these messages. HARD lifetime messages have precedence over SOFT lifetime messages, so now they will be checked first. Also now SADB_EXPIRE messages will be send even the SA has not been used, because keying daemons might want to rekey such SA. PR: 200282, 200283 Submitted by: Tobias Brunner <tobias at strongswan dot org> MFC after: 2 weeks
2015-05-19 08:30:04 +00:00
if (hard) {
lt->sadb_lifetime_exttype = SADB_EXT_LIFETIME_HARD;
lt->sadb_lifetime_allocations = sav->lft_h->allocations;
lt->sadb_lifetime_bytes = sav->lft_h->bytes;
lt->sadb_lifetime_addtime = sav->lft_h->addtime;
lt->sadb_lifetime_usetime = sav->lft_h->usetime;
} else {
lt->sadb_lifetime_exttype = SADB_EXT_LIFETIME_SOFT;
lt->sadb_lifetime_allocations = sav->lft_s->allocations;
lt->sadb_lifetime_bytes = sav->lft_s->bytes;
lt->sadb_lifetime_addtime = sav->lft_s->addtime;
lt->sadb_lifetime_usetime = sav->lft_s->usetime;
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
m_cat(result, m);
/* set sadb_address for source */
m = key_setsadbaddr(SADB_EXT_ADDRESS_SRC,
&sav->sah->saidx.src.sa,
FULLMASK, IPSEC_ULPROTO_ANY);
if (!m) {
error = ENOBUFS;
goto fail;
}
m_cat(result, m);
/* set sadb_address for destination */
m = key_setsadbaddr(SADB_EXT_ADDRESS_DST,
&sav->sah->saidx.dst.sa,
FULLMASK, IPSEC_ULPROTO_ANY);
if (!m) {
error = ENOBUFS;
goto fail;
}
m_cat(result, m);
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
/*
* XXX-BZ Handle NAT-T extensions here.
*/
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if ((result->m_flags & M_PKTHDR) == 0) {
error = EINVAL;
goto fail;
}
if (result->m_len < sizeof(struct sadb_msg)) {
result = m_pullup(result, sizeof(struct sadb_msg));
if (result == NULL) {
error = ENOBUFS;
goto fail;
}
}
result->m_pkthdr.len = 0;
for (m = result; m; m = m->m_next)
result->m_pkthdr.len += m->m_len;
mtod(result, struct sadb_msg *)->sadb_msg_len =
PFKEY_UNIT64(result->m_pkthdr.len);
return key_sendup_mbuf(NULL, result, KEY_SENDUP_REGISTERED);
fail:
if (result)
m_freem(result);
return error;
}
/*
* SADB_FLUSH processing
* receive
* <base>
* from the ikmpd, and free all entries in secastree.
* and send,
* <base>
* to the ikmpd.
* NOTE: to do is only marking SADB_SASTATE_DEAD.
*
* m will always be freed.
*/
static int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_flush(struct socket *so, struct mbuf *m, const struct sadb_msghdr *mhp)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct sadb_msg *newmsg;
struct secashead *sah, *nextsah;
struct secasvar *sav, *nextsav;
u_int16_t proto;
u_int8_t state;
u_int stateidx;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(so != NULL, ("null socket"));
IPSEC_ASSERT(mhp != NULL, ("null msghdr"));
IPSEC_ASSERT(mhp->msg != NULL, ("null msg"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* map satype to proto */
if ((proto = key_satype2proto(mhp->msg->sadb_msg_satype)) == 0) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid satype is passed.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
/* no SATYPE specified, i.e. flushing all SA. */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_LOCK();
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
for (sah = LIST_FIRST(&V_sahtree);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
sah != NULL;
sah = nextsah) {
nextsah = LIST_NEXT(sah, chain);
if (mhp->msg->sadb_msg_satype != SADB_SATYPE_UNSPEC
&& proto != sah->saidx.proto)
continue;
for (stateidx = 0;
Merge more of currently non-functional (i.e. resolving to whitespace) macros from p4/vimage branch. Do a better job at enclosing all instantiations of globals scheduled for virtualization in #ifdef VIMAGE_GLOBALS blocks. De-virtualize and mark as const saorder_state_alive and saorder_state_any arrays from ipsec code, given that they are never updated at runtime, so virtualizing them would be pointless. Reviewed by: bz, julian Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-11-26 22:32:07 +00:00
stateidx < _ARRAYLEN(saorder_state_alive);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
stateidx++) {
Merge more of currently non-functional (i.e. resolving to whitespace) macros from p4/vimage branch. Do a better job at enclosing all instantiations of globals scheduled for virtualization in #ifdef VIMAGE_GLOBALS blocks. De-virtualize and mark as const saorder_state_alive and saorder_state_any arrays from ipsec code, given that they are never updated at runtime, so virtualizing them would be pointless. Reviewed by: bz, julian Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-11-26 22:32:07 +00:00
state = saorder_state_any[stateidx];
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
for (sav = LIST_FIRST(&sah->savtree[state]);
sav != NULL;
sav = nextsav) {
nextsav = LIST_NEXT(sav, chain);
key_sa_chgstate(sav, SADB_SASTATE_DEAD);
KEY_FREESAV(&sav);
}
}
sah->state = SADB_SASTATE_DEAD;
}
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_UNLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (m->m_len < sizeof(struct sadb_msg) ||
sizeof(struct sadb_msg) > m->m_len + M_TRAILINGSPACE(m)) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: No more memory.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, ENOBUFS);
}
if (m->m_next)
m_freem(m->m_next);
m->m_next = NULL;
m->m_pkthdr.len = m->m_len = sizeof(struct sadb_msg);
newmsg = mtod(m, struct sadb_msg *);
newmsg->sadb_msg_errno = 0;
newmsg->sadb_msg_len = PFKEY_UNIT64(m->m_pkthdr.len);
return key_sendup_mbuf(so, m, KEY_SENDUP_ALL);
}
/*
* SADB_DUMP processing
* dump all entries including status of DEAD in SAD.
* receive
* <base>
* from the ikmpd, and dump all secasvar leaves
* and send,
* <base> .....
* to the ikmpd.
*
* m will always be freed.
*/
static int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_dump(struct socket *so, struct mbuf *m, const struct sadb_msghdr *mhp)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct secashead *sah;
struct secasvar *sav;
u_int16_t proto;
u_int stateidx;
u_int8_t satype;
u_int8_t state;
int cnt;
struct sadb_msg *newmsg;
struct mbuf *n;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(so != NULL, ("null socket"));
IPSEC_ASSERT(m != NULL, ("null mbuf"));
IPSEC_ASSERT(mhp != NULL, ("null msghdr"));
IPSEC_ASSERT(mhp->msg != NULL, ("null msg"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* map satype to proto */
if ((proto = key_satype2proto(mhp->msg->sadb_msg_satype)) == 0) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid satype is passed.\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
/* count sav entries to be sent to the userland. */
cnt = 0;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_LOCK();
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
LIST_FOREACH(sah, &V_sahtree, chain) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (mhp->msg->sadb_msg_satype != SADB_SATYPE_UNSPEC
&& proto != sah->saidx.proto)
continue;
for (stateidx = 0;
Merge more of currently non-functional (i.e. resolving to whitespace) macros from p4/vimage branch. Do a better job at enclosing all instantiations of globals scheduled for virtualization in #ifdef VIMAGE_GLOBALS blocks. De-virtualize and mark as const saorder_state_alive and saorder_state_any arrays from ipsec code, given that they are never updated at runtime, so virtualizing them would be pointless. Reviewed by: bz, julian Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-11-26 22:32:07 +00:00
stateidx < _ARRAYLEN(saorder_state_any);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
stateidx++) {
Merge more of currently non-functional (i.e. resolving to whitespace) macros from p4/vimage branch. Do a better job at enclosing all instantiations of globals scheduled for virtualization in #ifdef VIMAGE_GLOBALS blocks. De-virtualize and mark as const saorder_state_alive and saorder_state_any arrays from ipsec code, given that they are never updated at runtime, so virtualizing them would be pointless. Reviewed by: bz, julian Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-11-26 22:32:07 +00:00
state = saorder_state_any[stateidx];
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
LIST_FOREACH(sav, &sah->savtree[state], chain) {
cnt++;
}
}
}
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
if (cnt == 0) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_UNLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, ENOENT);
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* send this to the userland, one at a time. */
newmsg = NULL;
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
LIST_FOREACH(sah, &V_sahtree, chain) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (mhp->msg->sadb_msg_satype != SADB_SATYPE_UNSPEC
&& proto != sah->saidx.proto)
continue;
/* map proto to satype */
if ((satype = key_proto2satype(sah->saidx.proto)) == 0) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_UNLOCK();
ipseclog((LOG_DEBUG, "%s: there was invalid proto in "
"SAD.\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, EINVAL);
}
for (stateidx = 0;
Merge more of currently non-functional (i.e. resolving to whitespace) macros from p4/vimage branch. Do a better job at enclosing all instantiations of globals scheduled for virtualization in #ifdef VIMAGE_GLOBALS blocks. De-virtualize and mark as const saorder_state_alive and saorder_state_any arrays from ipsec code, given that they are never updated at runtime, so virtualizing them would be pointless. Reviewed by: bz, julian Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-11-26 22:32:07 +00:00
stateidx < _ARRAYLEN(saorder_state_any);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
stateidx++) {
Merge more of currently non-functional (i.e. resolving to whitespace) macros from p4/vimage branch. Do a better job at enclosing all instantiations of globals scheduled for virtualization in #ifdef VIMAGE_GLOBALS blocks. De-virtualize and mark as const saorder_state_alive and saorder_state_any arrays from ipsec code, given that they are never updated at runtime, so virtualizing them would be pointless. Reviewed by: bz, julian Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-11-26 22:32:07 +00:00
state = saorder_state_any[stateidx];
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
LIST_FOREACH(sav, &sah->savtree[state], chain) {
n = key_setdumpsa(sav, SADB_DUMP, satype,
--cnt, mhp->msg->sadb_msg_pid);
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
if (!n) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_UNLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return key_senderror(so, m, ENOBUFS);
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
key_sendup_mbuf(so, n, KEY_SENDUP_ONE);
}
}
}
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
SAHTREE_UNLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
m_freem(m);
return 0;
}
/*
* SADB_X_PROMISC processing
*
* m will always be freed.
*/
static int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_promisc(struct socket *so, struct mbuf *m, const struct sadb_msghdr *mhp)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
int olen;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(so != NULL, ("null socket"));
IPSEC_ASSERT(m != NULL, ("null mbuf"));
IPSEC_ASSERT(mhp != NULL, ("null msghdr"));
IPSEC_ASSERT(mhp->msg != NULL, ("null msg"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
olen = PFKEY_UNUNIT64(mhp->msg->sadb_msg_len);
if (olen < sizeof(struct sadb_msg)) {
#if 1
return key_senderror(so, m, EINVAL);
#else
m_freem(m);
return 0;
#endif
} else if (olen == sizeof(struct sadb_msg)) {
/* enable/disable promisc mode */
struct keycb *kp;
if ((kp = (struct keycb *)sotorawcb(so)) == NULL)
return key_senderror(so, m, EINVAL);
mhp->msg->sadb_msg_errno = 0;
switch (mhp->msg->sadb_msg_satype) {
case 0:
case 1:
kp->kp_promisc = mhp->msg->sadb_msg_satype;
break;
default:
return key_senderror(so, m, EINVAL);
}
/* send the original message back to everyone */
mhp->msg->sadb_msg_errno = 0;
return key_sendup_mbuf(so, m, KEY_SENDUP_ALL);
} else {
/* send packet as is */
m_adj(m, PFKEY_ALIGN8(sizeof(struct sadb_msg)));
/* TODO: if sadb_msg_seq is specified, send to specific pid */
return key_sendup_mbuf(so, m, KEY_SENDUP_ALL);
}
}
Remove __P() macro. Suggested by: kevlo Sponsored by: Yandex LLC
2014-12-03 04:08:41 +00:00
static int (*key_typesw[])(struct socket *, struct mbuf *,
const struct sadb_msghdr *) = {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
NULL, /* SADB_RESERVED */
key_getspi, /* SADB_GETSPI */
key_update, /* SADB_UPDATE */
key_add, /* SADB_ADD */
key_delete, /* SADB_DELETE */
key_get, /* SADB_GET */
key_acquire2, /* SADB_ACQUIRE */
key_register, /* SADB_REGISTER */
NULL, /* SADB_EXPIRE */
key_flush, /* SADB_FLUSH */
key_dump, /* SADB_DUMP */
key_promisc, /* SADB_X_PROMISC */
NULL, /* SADB_X_PCHANGE */
key_spdadd, /* SADB_X_SPDUPDATE */
key_spdadd, /* SADB_X_SPDADD */
key_spddelete, /* SADB_X_SPDDELETE */
key_spdget, /* SADB_X_SPDGET */
NULL, /* SADB_X_SPDACQUIRE */
key_spddump, /* SADB_X_SPDDUMP */
key_spdflush, /* SADB_X_SPDFLUSH */
key_spdadd, /* SADB_X_SPDSETIDX */
NULL, /* SADB_X_SPDEXPIRE */
key_spddelete2, /* SADB_X_SPDDELETE2 */
};
/*
* parse sadb_msg buffer to process PFKEYv2,
* and create a data to response if needed.
* I think to be dealed with mbuf directly.
* IN:
* msgp : pointer to pointer to a received buffer pulluped.
* This is rewrited to response.
* so : pointer to socket.
* OUT:
* length for buffer to send to user process.
*/
int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_parse(struct mbuf *m, struct socket *so)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct sadb_msg *msg;
struct sadb_msghdr mh;
u_int orglen;
int error;
int target;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(so != NULL, ("null socket"));
IPSEC_ASSERT(m != NULL, ("null mbuf"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
#if 0 /*kdebug_sadb assumes msg in linear buffer*/
KEYDEBUG(KEYDEBUG_KEY_DUMP,
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: passed sadb_msg\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
kdebug_sadb(msg));
#endif
if (m->m_len < sizeof(struct sadb_msg)) {
m = m_pullup(m, sizeof(struct sadb_msg));
if (!m)
return ENOBUFS;
}
msg = mtod(m, struct sadb_msg *);
orglen = PFKEY_UNUNIT64(msg->sadb_msg_len);
target = KEY_SENDUP_ONE;
if ((m->m_flags & M_PKTHDR) == 0 ||
m->m_pkthdr.len != m->m_pkthdr.len) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid message length.\n",__func__));
Use corresponding macros to update statistics for AH, ESP, IPIP, IPCOMP, PFKEY. MFC after: 2 weeks
2013-06-20 11:44:16 +00:00
PFKEYSTAT_INC(out_invlen);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = EINVAL;
goto senderror;
}
if (msg->sadb_msg_version != PF_KEY_V2) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: PF_KEY version %u is mismatched.\n",
__func__, msg->sadb_msg_version));
Use corresponding macros to update statistics for AH, ESP, IPIP, IPCOMP, PFKEY. MFC after: 2 weeks
2013-06-20 11:44:16 +00:00
PFKEYSTAT_INC(out_invver);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = EINVAL;
goto senderror;
}
if (msg->sadb_msg_type > SADB_MAX) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid type %u is passed.\n",
__func__, msg->sadb_msg_type));
Use corresponding macros to update statistics for AH, ESP, IPIP, IPCOMP, PFKEY. MFC after: 2 weeks
2013-06-20 11:44:16 +00:00
PFKEYSTAT_INC(out_invmsgtype);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = EINVAL;
goto senderror;
}
/* for old-fashioned code - should be nuked */
if (m->m_pkthdr.len > MCLBYTES) {
m_freem(m);
return ENOBUFS;
}
if (m->m_next) {
struct mbuf *n;
Mechanically substitute flags from historic mbuf allocator with malloc(9) flags within sys. Exceptions: - sys/contrib not touched - sys/mbuf.h edited manually
2012-12-05 08:04:20 +00:00
MGETHDR(n, M_NOWAIT, MT_DATA);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (n && m->m_pkthdr.len > MHLEN) {
In order to reduce use of M_EXT outside of the mbuf allocator and socket-buffer implementations, introduce a return value for MCLGET() (and m_cljget() that underlies it) to allow the caller to avoid testing M_EXT itself. Update all callers to use the return value. With this change, very few network device drivers remain aware of M_EXT; the primary exceptions lie in mbuf-chain pretty printers for debugging, and in a few cases, custom mbuf and cluster allocation implementations. NB: This is a difficult-to-test change as it touches many drivers for which I don't have physical devices. Instead we've gone for intensive review, but further post-commit review would definitely be appreciated to spot errors where changes could not easily be made mechanically, but were largely mechanical in nature. Differential Revision: https://reviews.freebsd.org/D1440 Reviewed by: adrian, bz, gnn Sponsored by: EMC / Isilon Storage Division
2015-01-06 12:59:37 +00:00
if (!(MCLGET(n, M_NOWAIT))) {
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
m_free(n);
n = NULL;
}
}
if (!n) {
m_freem(m);
return ENOBUFS;
}
m_copydata(m, 0, m->m_pkthdr.len, mtod(n, caddr_t));
n->m_pkthdr.len = n->m_len = m->m_pkthdr.len;
n->m_next = NULL;
m_freem(m);
m = n;
}
/* align the mbuf chain so that extensions are in contiguous region. */
error = key_align(m, &mh);
if (error)
return error;
msg = mh.msg;
/* check SA type */
switch (msg->sadb_msg_satype) {
case SADB_SATYPE_UNSPEC:
switch (msg->sadb_msg_type) {
case SADB_GETSPI:
case SADB_UPDATE:
case SADB_ADD:
case SADB_DELETE:
case SADB_GET:
case SADB_ACQUIRE:
case SADB_EXPIRE:
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: must specify satype "
"when msg type=%u.\n", __func__,
msg->sadb_msg_type));
Use corresponding macros to update statistics for AH, ESP, IPIP, IPCOMP, PFKEY. MFC after: 2 weeks
2013-06-20 11:44:16 +00:00
PFKEYSTAT_INC(out_invsatype);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = EINVAL;
goto senderror;
}
break;
case SADB_SATYPE_AH:
case SADB_SATYPE_ESP:
case SADB_X_SATYPE_IPCOMP:
Initial import of RFC 2385 (TCP-MD5) digest support. This is the first of two commits; bringing in the kernel support first. This can be enabled by compiling a kernel with options TCP_SIGNATURE and FAST_IPSEC. For the uninitiated, this is a TCP option which provides for a means of authenticating TCP sessions which came into being before IPSEC. It is still relevant today, however, as it is used by many commercial router vendors, particularly with BGP, and as such has become a requirement for interconnect at many major Internet points of presence. Several parts of the TCP and IP headers, including the segment payload, are digested with MD5, including a shared secret. The PF_KEY interface is used to manage the secrets using security associations in the SADB. There is a limitation here in that as there is no way to map a TCP flow per-port back to an SPI without polluting tcpcb or using the SPD; the code to do the latter is unstable at this time. Therefore this code only supports per-host keying granularity. Whilst FAST_IPSEC is mutually exclusive with KAME IPSEC (and thus IPv6), TCP_SIGNATURE applies only to IPv4. For the vast majority of prospective users of this feature, this will not pose any problem. This implementation is output-only; that is, the option is honoured when responding to a host initiating a TCP session, but no effort is made [yet] to authenticate inbound traffic. This is, however, sufficient to interwork with Cisco equipment. Tested with a Cisco 2501 running IOS 12.0(27), and Quagga 0.96.4 with local patches. Patches for tcpdump to validate TCP-MD5 sessions are also available from me upon request. Sponsored by: sentex.net
2004-02-11 04:26:04 +00:00
case SADB_X_SATYPE_TCPSIGNATURE:
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
switch (msg->sadb_msg_type) {
case SADB_X_SPDADD:
case SADB_X_SPDDELETE:
case SADB_X_SPDGET:
case SADB_X_SPDDUMP:
case SADB_X_SPDFLUSH:
case SADB_X_SPDSETIDX:
case SADB_X_SPDUPDATE:
case SADB_X_SPDDELETE2:
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: illegal satype=%u\n",
__func__, msg->sadb_msg_type));
Use corresponding macros to update statistics for AH, ESP, IPIP, IPCOMP, PFKEY. MFC after: 2 weeks
2013-06-20 11:44:16 +00:00
PFKEYSTAT_INC(out_invsatype);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = EINVAL;
goto senderror;
}
break;
case SADB_SATYPE_RSVP:
case SADB_SATYPE_OSPFV2:
case SADB_SATYPE_RIPV2:
case SADB_SATYPE_MIP:
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: type %u isn't supported.\n",
__func__, msg->sadb_msg_satype));
Use corresponding macros to update statistics for AH, ESP, IPIP, IPCOMP, PFKEY. MFC after: 2 weeks
2013-06-20 11:44:16 +00:00
PFKEYSTAT_INC(out_invsatype);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = EOPNOTSUPP;
goto senderror;
case 1: /* XXX: What does it do? */
if (msg->sadb_msg_type == SADB_X_PROMISC)
break;
/*FALLTHROUGH*/
default:
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid type %u is passed.\n",
__func__, msg->sadb_msg_satype));
Use corresponding macros to update statistics for AH, ESP, IPIP, IPCOMP, PFKEY. MFC after: 2 weeks
2013-06-20 11:44:16 +00:00
PFKEYSTAT_INC(out_invsatype);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = EINVAL;
goto senderror;
}
/* check field of upper layer protocol and address family */
if (mh.ext[SADB_EXT_ADDRESS_SRC] != NULL
&& mh.ext[SADB_EXT_ADDRESS_DST] != NULL) {
struct sadb_address *src0, *dst0;
u_int plen;
src0 = (struct sadb_address *)(mh.ext[SADB_EXT_ADDRESS_SRC]);
dst0 = (struct sadb_address *)(mh.ext[SADB_EXT_ADDRESS_DST]);
/* check upper layer protocol */
if (src0->sadb_address_proto != dst0->sadb_address_proto) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: upper layer protocol "
"mismatched.\n", __func__));
Use corresponding macros to update statistics for AH, ESP, IPIP, IPCOMP, PFKEY. MFC after: 2 weeks
2013-06-20 11:44:16 +00:00
PFKEYSTAT_INC(out_invaddr);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = EINVAL;
goto senderror;
}
/* check family */
if (PFKEY_ADDR_SADDR(src0)->sa_family !=
PFKEY_ADDR_SADDR(dst0)->sa_family) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: address family mismatched.\n",
__func__));
Use corresponding macros to update statistics for AH, ESP, IPIP, IPCOMP, PFKEY. MFC after: 2 weeks
2013-06-20 11:44:16 +00:00
PFKEYSTAT_INC(out_invaddr);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = EINVAL;
goto senderror;
}
if (PFKEY_ADDR_SADDR(src0)->sa_len !=
PFKEY_ADDR_SADDR(dst0)->sa_len) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: address struct size "
"mismatched.\n", __func__));
Use corresponding macros to update statistics for AH, ESP, IPIP, IPCOMP, PFKEY. MFC after: 2 weeks
2013-06-20 11:44:16 +00:00
PFKEYSTAT_INC(out_invaddr);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = EINVAL;
goto senderror;
}
switch (PFKEY_ADDR_SADDR(src0)->sa_family) {
case AF_INET:
if (PFKEY_ADDR_SADDR(src0)->sa_len !=
sizeof(struct sockaddr_in)) {
Use corresponding macros to update statistics for AH, ESP, IPIP, IPCOMP, PFKEY. MFC after: 2 weeks
2013-06-20 11:44:16 +00:00
PFKEYSTAT_INC(out_invaddr);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = EINVAL;
goto senderror;
}
break;
case AF_INET6:
if (PFKEY_ADDR_SADDR(src0)->sa_len !=
sizeof(struct sockaddr_in6)) {
Use corresponding macros to update statistics for AH, ESP, IPIP, IPCOMP, PFKEY. MFC after: 2 weeks
2013-06-20 11:44:16 +00:00
PFKEYSTAT_INC(out_invaddr);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = EINVAL;
goto senderror;
}
break;
default:
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: unsupported address family\n",
__func__));
Use corresponding macros to update statistics for AH, ESP, IPIP, IPCOMP, PFKEY. MFC after: 2 weeks
2013-06-20 11:44:16 +00:00
PFKEYSTAT_INC(out_invaddr);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = EAFNOSUPPORT;
goto senderror;
}
switch (PFKEY_ADDR_SADDR(src0)->sa_family) {
case AF_INET:
plen = sizeof(struct in_addr) << 3;
break;
case AF_INET6:
plen = sizeof(struct in6_addr) << 3;
break;
default:
plen = 0; /*fool gcc*/
break;
}
/* check max prefix length */
if (src0->sadb_address_prefixlen > plen ||
dst0->sadb_address_prefixlen > plen) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: illegal prefixlen.\n",
__func__));
Use corresponding macros to update statistics for AH, ESP, IPIP, IPCOMP, PFKEY. MFC after: 2 weeks
2013-06-20 11:44:16 +00:00
PFKEYSTAT_INC(out_invaddr);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = EINVAL;
goto senderror;
}
/*
* prefixlen == 0 is valid because there can be a case when
* all addresses are matched.
*/
}
if (msg->sadb_msg_type >= sizeof(key_typesw)/sizeof(key_typesw[0]) ||
key_typesw[msg->sadb_msg_type] == NULL) {
Use corresponding macros to update statistics for AH, ESP, IPIP, IPCOMP, PFKEY. MFC after: 2 weeks
2013-06-20 11:44:16 +00:00
PFKEYSTAT_INC(out_invmsgtype);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = EINVAL;
goto senderror;
}
return (*key_typesw[msg->sadb_msg_type])(so, m, &mh);
senderror:
msg->sadb_msg_errno = error;
return key_sendup_mbuf(so, m, target);
}
static int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_senderror(struct socket *so, struct mbuf *m, int code)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct sadb_msg *msg;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(m->m_len >= sizeof(struct sadb_msg),
("mbuf too small, len %u", m->m_len));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
msg = mtod(m, struct sadb_msg *);
msg->sadb_msg_errno = code;
return key_sendup_mbuf(so, m, KEY_SENDUP_ONE);
}
/*
* set the pointer to each header into message buffer.
* m will be freed on error.
* XXX larger-than-MCLBYTES extension?
*/
static int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_align(struct mbuf *m, struct sadb_msghdr *mhp)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
struct mbuf *n;
struct sadb_ext *ext;
size_t off, end;
int extlen;
int toff;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(m != NULL, ("null mbuf"));
IPSEC_ASSERT(mhp != NULL, ("null msghdr"));
IPSEC_ASSERT(m->m_len >= sizeof(struct sadb_msg),
("mbuf too small, len %u", m->m_len));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* initialize */
bzero(mhp, sizeof(*mhp));
mhp->msg = mtod(m, struct sadb_msg *);
mhp->ext[0] = (struct sadb_ext *)mhp->msg; /*XXX backward compat */
end = PFKEY_UNUNIT64(mhp->msg->sadb_msg_len);
extlen = end; /*just in case extlen is not updated*/
for (off = sizeof(struct sadb_msg); off < end; off += extlen) {
n = m_pulldown(m, off, sizeof(struct sadb_ext), &toff);
if (!n) {
/* m is already freed */
return ENOBUFS;
}
ext = (struct sadb_ext *)(mtod(n, caddr_t) + toff);
/* set pointer */
switch (ext->sadb_ext_type) {
case SADB_EXT_SA:
case SADB_EXT_ADDRESS_SRC:
case SADB_EXT_ADDRESS_DST:
case SADB_EXT_ADDRESS_PROXY:
case SADB_EXT_LIFETIME_CURRENT:
case SADB_EXT_LIFETIME_HARD:
case SADB_EXT_LIFETIME_SOFT:
case SADB_EXT_KEY_AUTH:
case SADB_EXT_KEY_ENCRYPT:
case SADB_EXT_IDENTITY_SRC:
case SADB_EXT_IDENTITY_DST:
case SADB_EXT_SENSITIVITY:
case SADB_EXT_PROPOSAL:
case SADB_EXT_SUPPORTED_AUTH:
case SADB_EXT_SUPPORTED_ENCRYPT:
case SADB_EXT_SPIRANGE:
case SADB_X_EXT_POLICY:
case SADB_X_EXT_SA2:
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
#ifdef IPSEC_NAT_T
case SADB_X_EXT_NAT_T_TYPE:
case SADB_X_EXT_NAT_T_SPORT:
case SADB_X_EXT_NAT_T_DPORT:
case SADB_X_EXT_NAT_T_OAI:
case SADB_X_EXT_NAT_T_OAR:
case SADB_X_EXT_NAT_T_FRAG:
#endif
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* duplicate check */
/*
* XXX Are there duplication payloads of either
* KEY_AUTH or KEY_ENCRYPT ?
*/
if (mhp->ext[ext->sadb_ext_type] != NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: duplicate ext_type "
"%u\n", __func__, ext->sadb_ext_type));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
m_freem(m);
Use corresponding macros to update statistics for AH, ESP, IPIP, IPCOMP, PFKEY. MFC after: 2 weeks
2013-06-20 11:44:16 +00:00
PFKEYSTAT_INC(out_dupext);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return EINVAL;
}
break;
default:
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_DEBUG, "%s: invalid ext_type %u\n",
__func__, ext->sadb_ext_type));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
m_freem(m);
Use corresponding macros to update statistics for AH, ESP, IPIP, IPCOMP, PFKEY. MFC after: 2 weeks
2013-06-20 11:44:16 +00:00
PFKEYSTAT_INC(out_invexttype);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return EINVAL;
}
extlen = PFKEY_UNUNIT64(ext->sadb_ext_len);
if (key_validate_ext(ext, extlen)) {
m_freem(m);
Use corresponding macros to update statistics for AH, ESP, IPIP, IPCOMP, PFKEY. MFC after: 2 weeks
2013-06-20 11:44:16 +00:00
PFKEYSTAT_INC(out_invlen);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return EINVAL;
}
n = m_pulldown(m, off, extlen, &toff);
if (!n) {
/* m is already freed */
return ENOBUFS;
}
ext = (struct sadb_ext *)(mtod(n, caddr_t) + toff);
mhp->ext[ext->sadb_ext_type] = ext;
mhp->extoff[ext->sadb_ext_type] = off;
mhp->extlen[ext->sadb_ext_type] = extlen;
}
if (off != end) {
m_freem(m);
Use corresponding macros to update statistics for AH, ESP, IPIP, IPCOMP, PFKEY. MFC after: 2 weeks
2013-06-20 11:44:16 +00:00
PFKEYSTAT_INC(out_invlen);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return EINVAL;
}
return 0;
}
static int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_validate_ext(const struct sadb_ext *ext, int len)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
const struct sockaddr *sa;
enum { NONE, ADDR } checktype = NONE;
int baselen = 0;
const int sal = offsetof(struct sockaddr, sa_len) + sizeof(sa->sa_len);
if (len != PFKEY_UNUNIT64(ext->sadb_ext_len))
return EINVAL;
/* if it does not match minimum/maximum length, bail */
if (ext->sadb_ext_type >= sizeof(minsize) / sizeof(minsize[0]) ||
ext->sadb_ext_type >= sizeof(maxsize) / sizeof(maxsize[0]))
return EINVAL;
if (!minsize[ext->sadb_ext_type] || len < minsize[ext->sadb_ext_type])
return EINVAL;
if (maxsize[ext->sadb_ext_type] && len > maxsize[ext->sadb_ext_type])
return EINVAL;
/* more checks based on sadb_ext_type XXX need more */
switch (ext->sadb_ext_type) {
case SADB_EXT_ADDRESS_SRC:
case SADB_EXT_ADDRESS_DST:
case SADB_EXT_ADDRESS_PROXY:
baselen = PFKEY_ALIGN8(sizeof(struct sadb_address));
checktype = ADDR;
break;
case SADB_EXT_IDENTITY_SRC:
case SADB_EXT_IDENTITY_DST:
if (((const struct sadb_ident *)ext)->sadb_ident_type ==
SADB_X_IDENTTYPE_ADDR) {
baselen = PFKEY_ALIGN8(sizeof(struct sadb_ident));
checktype = ADDR;
} else
checktype = NONE;
break;
default:
checktype = NONE;
break;
}
switch (checktype) {
case NONE:
break;
case ADDR:
sa = (const struct sockaddr *)(((const u_int8_t*)ext)+baselen);
if (len < baselen + sal)
return EINVAL;
if (baselen + PFKEY_ALIGN8(sa->sa_len) != len)
return EINVAL;
break;
}
return 0;
}
void
Enter the 1990s. Use real function declaration.
2008-06-29 00:49:50 +00:00
key_init(void)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
int i;
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
for (i = 0; i < IPSEC_DIR_MAX; i++)
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
TAILQ_INIT(&V_sptree[i]);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
LIST_INIT(&V_sahtree);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
for (i = 0; i <= SADB_SATYPE_MAX; i++)
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
LIST_INIT(&V_regtree[i]);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
LIST_INIT(&V_acqtree);
LIST_INIT(&V_spacqtree);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
First pass at separating per-vnet initializer functions from existing functions for initializing global state. At this stage, the new per-vnet initializer functions are directly called from the existing global initialization code, which should in most cases result in compiler inlining those new functions, hence yielding a near-zero functional change. Modify the existing initializer functions which are invoked via protosw, like ip_init() et. al., to allow them to be invoked multiple times, i.e. per each vnet. Global state, if any, is initialized only if such functions are called within the context of vnet0, which will be determined via the IS_DEFAULT_VNET(curvnet) check (currently always true). While here, V_irtualize a few remaining global UMA zones used by net/netinet/netipsec networking code. While it is not yet clear to me or anybody else whether this is the right thing to do, at this stage this makes the code more readable, and makes it easier to track uncollected UMA-zone-backed objects on vnet removal. In the long run, it's quite possible that some form of shared use of UMA zone pools among multiple vnets should be considered. Bump __FreeBSD_version due to changes in layout of structs vnet_ipfw, vnet_inet and vnet_net. Approved by: julian (mentor)
2009-04-06 22:29:41 +00:00
if (!IS_DEFAULT_VNET(curvnet))
return;
SPTREE_LOCK_INIT();
REGTREE_LOCK_INIT();
SAHTREE_LOCK_INIT();
ACQ_LOCK_INIT();
SPACQ_LOCK_INIT();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
#ifndef IPSEC_DEBUG2
CALLOUT_MPSAFE has lost its meaning since r141428, i.e., for more than ten years for head. However, it is continuously misused as the mpsafe argument for callout_init(9). Deprecate the flag and clean up callout_init() calls to make them more consistent. Differential Revision: https://reviews.freebsd.org/D2613 Reviewed by: jhb MFC after: 2 weeks
2015-05-22 17:05:21 +00:00
callout_init(&key_timer, 1);
Use a static callout to drive key_timehandler() instead of timeout(). While here, make key_timehandler() private to key.c. Submitted by: bz (2) Tested by: bz
2014-10-23 20:43:16 +00:00
callout_reset(&key_timer, hz, key_timehandler, NULL);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
#endif /*IPSEC_DEBUG2*/
/* initialize key statistics */
keystat.getspi_count = 1;
Remove the "Fast " from the "Fast IPsec: Initialized Security Association Processing." printf. People kept asking questions about this after the IPsec shuffle. This still is the Fast IPsec implementation so no worries that it would be any slower now. There are no functional changes. Discussed with: sam MFC after: 4 days
2008-03-14 16:25:40 +00:00
printf("IPsec: Initialized Security Association Processing.\n");
Introduce an infrastructure for dismantling vnet instances. Vnet modules and protocol domains may now register destructor functions to clean up and release per-module state. The destructor mechanisms can be triggered by invoking "vimage -d", or a future equivalent command which will be provided via the new jail framework. While this patch introduces numerous placeholder destructor functions, many of those are currently incomplete, thus leaking memory or (even worse) failing to stop all running timers. Many of such issues are already known and will be incrementaly fixed over the next weeks in smaller incremental commits. Apart from introducing new fields in structs ifnet, domain, protosw and vnet_net, which requires the kernel and modules to be rebuilt, this change should have no impact on nooptions VIMAGE builds, since vnet destructors can only be called in VIMAGE kernels. Moreover, destructor functions should be in general compiled in only in options VIMAGE builds, except for kernel modules which can be safely kldunloaded at run time. Bump __FreeBSD_version to 800097. Reviewed by: bz, julian Approved by: rwatson, kib (re), julian (mentor)
2009-06-08 17:15:40 +00:00
}
#ifdef VIMAGE
void
key_destroy(void)
{
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
TAILQ_HEAD(, secpolicy) drainq;
Introduce an infrastructure for dismantling vnet instances. Vnet modules and protocol domains may now register destructor functions to clean up and release per-module state. The destructor mechanisms can be triggered by invoking "vimage -d", or a future equivalent command which will be provided via the new jail framework. While this patch introduces numerous placeholder destructor functions, many of those are currently incomplete, thus leaking memory or (even worse) failing to stop all running timers. Many of such issues are already known and will be incrementaly fixed over the next weeks in smaller incremental commits. Apart from introducing new fields in structs ifnet, domain, protosw and vnet_net, which requires the kernel and modules to be rebuilt, this change should have no impact on nooptions VIMAGE builds, since vnet destructors can only be called in VIMAGE kernels. Moreover, destructor functions should be in general compiled in only in options VIMAGE builds, except for kernel modules which can be safely kldunloaded at run time. Bump __FreeBSD_version to 800097. Reviewed by: bz, julian Approved by: rwatson, kib (re), julian (mentor)
2009-06-08 17:15:40 +00:00
struct secpolicy *sp, *nextsp;
When tearing down IPsec as part of a (virtual) network stack, do not try to free the same list twice but free both the acquiring list and the security policy acquiring list. Reviewed by: anchie MFC after: 3 days
2010-03-28 06:51:50 +00:00
struct secacq *acq, *nextacq;
struct secspacq *spacq, *nextspacq;
Introduce an infrastructure for dismantling vnet instances. Vnet modules and protocol domains may now register destructor functions to clean up and release per-module state. The destructor mechanisms can be triggered by invoking "vimage -d", or a future equivalent command which will be provided via the new jail framework. While this patch introduces numerous placeholder destructor functions, many of those are currently incomplete, thus leaking memory or (even worse) failing to stop all running timers. Many of such issues are already known and will be incrementaly fixed over the next weeks in smaller incremental commits. Apart from introducing new fields in structs ifnet, domain, protosw and vnet_net, which requires the kernel and modules to be rebuilt, this change should have no impact on nooptions VIMAGE builds, since vnet destructors can only be called in VIMAGE kernels. Moreover, destructor functions should be in general compiled in only in options VIMAGE builds, except for kernel modules which can be safely kldunloaded at run time. Bump __FreeBSD_version to 800097. Reviewed by: bz, julian Approved by: rwatson, kib (re), julian (mentor)
2009-06-08 17:15:40 +00:00
struct secashead *sah, *nextsah;
struct secreg *reg;
int i;
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
TAILQ_INIT(&drainq);
SPTREE_WLOCK();
Introduce an infrastructure for dismantling vnet instances. Vnet modules and protocol domains may now register destructor functions to clean up and release per-module state. The destructor mechanisms can be triggered by invoking "vimage -d", or a future equivalent command which will be provided via the new jail framework. While this patch introduces numerous placeholder destructor functions, many of those are currently incomplete, thus leaking memory or (even worse) failing to stop all running timers. Many of such issues are already known and will be incrementaly fixed over the next weeks in smaller incremental commits. Apart from introducing new fields in structs ifnet, domain, protosw and vnet_net, which requires the kernel and modules to be rebuilt, this change should have no impact on nooptions VIMAGE builds, since vnet destructors can only be called in VIMAGE kernels. Moreover, destructor functions should be in general compiled in only in options VIMAGE builds, except for kernel modules which can be safely kldunloaded at run time. Bump __FreeBSD_version to 800097. Reviewed by: bz, julian Approved by: rwatson, kib (re), julian (mentor)
2009-06-08 17:15:40 +00:00
for (i = 0; i < IPSEC_DIR_MAX; i++) {
Fix VIMAGE build.
2014-12-25 13:38:51 +00:00
TAILQ_CONCAT(&drainq, &V_sptree[i], chain);
Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and IPv6. Initialize it only once in def_policy_init(). Remove its initialization from key_init() and make it static. Remove several fields from struct secpolicy: * lock - it isn't so useful having mutex in the structure, but the only thing we do with it is initialization and destroying. * state - it has only two values - DEAD and ALIVE. Instead of take a lock and change the state to DEAD, then take lock again in GC function and delete policy from the chain - keep in the chain only ALIVE policies. * scangen - it was used in GC function to protect from sending several SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries in the chain and there is no need to have scangen variable. Use TAILQ to implement SPD entries chain. Use rmlock to protect access to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK when we are inserting (or removing) SP entry in the chain. Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9) API to implement refcounting in SPD. Merge code from key_delsp() and _key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases when we want to release reference or just delete SP entry. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-24 18:34:56 +00:00
}
SPTREE_WUNLOCK();
sp = TAILQ_FIRST(&drainq);
while (sp != NULL) {
nextsp = TAILQ_NEXT(sp, chain);
KEY_FREESP(&sp);
sp = nextsp;
Introduce an infrastructure for dismantling vnet instances. Vnet modules and protocol domains may now register destructor functions to clean up and release per-module state. The destructor mechanisms can be triggered by invoking "vimage -d", or a future equivalent command which will be provided via the new jail framework. While this patch introduces numerous placeholder destructor functions, many of those are currently incomplete, thus leaking memory or (even worse) failing to stop all running timers. Many of such issues are already known and will be incrementaly fixed over the next weeks in smaller incremental commits. Apart from introducing new fields in structs ifnet, domain, protosw and vnet_net, which requires the kernel and modules to be rebuilt, this change should have no impact on nooptions VIMAGE builds, since vnet destructors can only be called in VIMAGE kernels. Moreover, destructor functions should be in general compiled in only in options VIMAGE builds, except for kernel modules which can be safely kldunloaded at run time. Bump __FreeBSD_version to 800097. Reviewed by: bz, julian Approved by: rwatson, kib (re), julian (mentor)
2009-06-08 17:15:40 +00:00
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Introduce an infrastructure for dismantling vnet instances. Vnet modules and protocol domains may now register destructor functions to clean up and release per-module state. The destructor mechanisms can be triggered by invoking "vimage -d", or a future equivalent command which will be provided via the new jail framework. While this patch introduces numerous placeholder destructor functions, many of those are currently incomplete, thus leaking memory or (even worse) failing to stop all running timers. Many of such issues are already known and will be incrementaly fixed over the next weeks in smaller incremental commits. Apart from introducing new fields in structs ifnet, domain, protosw and vnet_net, which requires the kernel and modules to be rebuilt, this change should have no impact on nooptions VIMAGE builds, since vnet destructors can only be called in VIMAGE kernels. Moreover, destructor functions should be in general compiled in only in options VIMAGE builds, except for kernel modules which can be safely kldunloaded at run time. Bump __FreeBSD_version to 800097. Reviewed by: bz, julian Approved by: rwatson, kib (re), julian (mentor)
2009-06-08 17:15:40 +00:00
SAHTREE_LOCK();
for (sah = LIST_FIRST(&V_sahtree); sah != NULL; sah = nextsah) {
nextsah = LIST_NEXT(sah, chain);
if (__LIST_CHAINED(sah)) {
LIST_REMOVE(sah, chain);
free(sah, M_IPSEC_SAH);
}
}
SAHTREE_UNLOCK();
REGTREE_LOCK();
for (i = 0; i <= SADB_SATYPE_MAX; i++) {
LIST_FOREACH(reg, &V_regtree[i], chain) {
if (__LIST_CHAINED(reg)) {
LIST_REMOVE(reg, chain);
free(reg, M_IPSEC_SAR);
break;
}
}
}
REGTREE_UNLOCK();
ACQ_LOCK();
When tearing down IPsec as part of a (virtual) network stack, do not try to free the same list twice but free both the acquiring list and the security policy acquiring list. Reviewed by: anchie MFC after: 3 days
2010-03-28 06:51:50 +00:00
for (acq = LIST_FIRST(&V_acqtree); acq != NULL; acq = nextacq) {
Introduce an infrastructure for dismantling vnet instances. Vnet modules and protocol domains may now register destructor functions to clean up and release per-module state. The destructor mechanisms can be triggered by invoking "vimage -d", or a future equivalent command which will be provided via the new jail framework. While this patch introduces numerous placeholder destructor functions, many of those are currently incomplete, thus leaking memory or (even worse) failing to stop all running timers. Many of such issues are already known and will be incrementaly fixed over the next weeks in smaller incremental commits. Apart from introducing new fields in structs ifnet, domain, protosw and vnet_net, which requires the kernel and modules to be rebuilt, this change should have no impact on nooptions VIMAGE builds, since vnet destructors can only be called in VIMAGE kernels. Moreover, destructor functions should be in general compiled in only in options VIMAGE builds, except for kernel modules which can be safely kldunloaded at run time. Bump __FreeBSD_version to 800097. Reviewed by: bz, julian Approved by: rwatson, kib (re), julian (mentor)
2009-06-08 17:15:40 +00:00
nextacq = LIST_NEXT(acq, chain);
if (__LIST_CHAINED(acq)) {
LIST_REMOVE(acq, chain);
free(acq, M_IPSEC_SAQ);
}
}
ACQ_UNLOCK();
SPACQ_LOCK();
When tearing down IPsec as part of a (virtual) network stack, do not try to free the same list twice but free both the acquiring list and the security policy acquiring list. Reviewed by: anchie MFC after: 3 days
2010-03-28 06:51:50 +00:00
for (spacq = LIST_FIRST(&V_spacqtree); spacq != NULL;
spacq = nextspacq) {
nextspacq = LIST_NEXT(spacq, chain);
if (__LIST_CHAINED(spacq)) {
LIST_REMOVE(spacq, chain);
free(spacq, M_IPSEC_SAQ);
Introduce an infrastructure for dismantling vnet instances. Vnet modules and protocol domains may now register destructor functions to clean up and release per-module state. The destructor mechanisms can be triggered by invoking "vimage -d", or a future equivalent command which will be provided via the new jail framework. While this patch introduces numerous placeholder destructor functions, many of those are currently incomplete, thus leaking memory or (even worse) failing to stop all running timers. Many of such issues are already known and will be incrementaly fixed over the next weeks in smaller incremental commits. Apart from introducing new fields in structs ifnet, domain, protosw and vnet_net, which requires the kernel and modules to be rebuilt, this change should have no impact on nooptions VIMAGE builds, since vnet destructors can only be called in VIMAGE kernels. Moreover, destructor functions should be in general compiled in only in options VIMAGE builds, except for kernel modules which can be safely kldunloaded at run time. Bump __FreeBSD_version to 800097. Reviewed by: bz, julian Approved by: rwatson, kib (re), julian (mentor)
2009-06-08 17:15:40 +00:00
}
}
SPACQ_UNLOCK();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
Introduce an infrastructure for dismantling vnet instances. Vnet modules and protocol domains may now register destructor functions to clean up and release per-module state. The destructor mechanisms can be triggered by invoking "vimage -d", or a future equivalent command which will be provided via the new jail framework. While this patch introduces numerous placeholder destructor functions, many of those are currently incomplete, thus leaking memory or (even worse) failing to stop all running timers. Many of such issues are already known and will be incrementaly fixed over the next weeks in smaller incremental commits. Apart from introducing new fields in structs ifnet, domain, protosw and vnet_net, which requires the kernel and modules to be rebuilt, this change should have no impact on nooptions VIMAGE builds, since vnet destructors can only be called in VIMAGE kernels. Moreover, destructor functions should be in general compiled in only in options VIMAGE builds, except for kernel modules which can be safely kldunloaded at run time. Bump __FreeBSD_version to 800097. Reviewed by: bz, julian Approved by: rwatson, kib (re), julian (mentor)
2009-06-08 17:15:40 +00:00
#endif
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/*
* XXX: maybe This function is called after INBOUND IPsec processing.
*
* Special check for tunnel-mode packets.
* We must make some checks for consistency between inner and outer IP header.
*
* xxx more checks to be provided
*/
int
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_checktunnelsanity(struct secasvar *sav, u_int family, caddr_t src,
caddr_t dst)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(sav->sah != NULL, ("null SA header"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* XXX: check inner IP header */
return 1;
}
/* record data transfer on SA, and update timestamps */
void
ANSIfy function declarations. Sponsored by: Yandex LLC
2014-12-03 03:50:54 +00:00
key_sa_recordxfer(struct secasvar *sav, struct mbuf *m)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(sav != NULL, ("Null secasvar"));
IPSEC_ASSERT(m != NULL, ("Null mbuf"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (!sav->lft_c)
return;
/*
* XXX Currently, there is a difference of bytes size
* between inbound and outbound processing.
*/
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
sav->lft_c->bytes += m->m_pkthdr.len;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* to check bytes lifetime is done in key_timehandler(). */
/*
* We use the number of packets as the unit of
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
* allocations. We increment the variable
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
* whenever {esp,ah}_{in,out}put is called.
*/
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
sav->lft_c->allocations++;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* XXX check for expires? */
/*
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
* NOTE: We record CURRENT usetime by using wall clock,
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
* in seconds. HARD and SOFT lifetime are measured by the time
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
* difference (again in seconds) from usetime.
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
*
* usetime
* v expire expire
* -----+-----+--------+---> t
* <--------------> HARD
* <-----> SOFT
*/
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
sav->lft_c->usetime = time_second;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* XXX check for expires? */
return;
}
static void
Change the functions to ANSI in those cases where it breaks promotion to int rule. See ISO C Standard: SS6.7.5.3:15. Approved by: kib (mentor) Reviewed by: warner Tested by: silence on -current
2009-02-24 18:09:31 +00:00
key_sa_chgstate(struct secasvar *sav, u_int8_t state)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(sav != NULL, ("NULL sav"));
SAHTREE_LOCK_ASSERT();
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
if (sav->state != state) {
if (__LIST_CHAINED(sav))
LIST_REMOVE(sav, chain);
sav->state = state;
LIST_INSERT_HEAD(&sav->sah->savtree[state], sav, chain);
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
/*
* Take one of the kernel's security keys and convert it into a PF_KEY
* structure within an mbuf, suitable for sending up to a waiting
* application in user land.
*
* IN:
* src: A pointer to a kernel security key.
* exttype: Which type of key this is. Refer to the PF_KEY data structures.
* OUT:
* a valid mbuf or NULL indicating an error
*
*/
static struct mbuf *
key_setkey(struct seckey *src, u_int16_t exttype)
{
struct mbuf *m;
struct sadb_key *p;
With the current code 'src' is never NULL. Nevertheless move the check for NULL before dereferencing the pointer. Found with: Coverity Prevent(tm) CID: 2528
2007-06-15 22:35:59 +00:00
int len;
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
if (src == NULL)
return NULL;
With the current code 'src' is never NULL. Nevertheless move the check for NULL before dereferencing the pointer. Found with: Coverity Prevent(tm) CID: 2528
2007-06-15 22:35:59 +00:00
len = PFKEY_ALIGN8(sizeof(struct sadb_key) + _KEYLEN(src));
Use m_get2() + m_align() instead of hand made key_alloc_mbuf(). Code examination shows, that although key_alloc_mbuf() could return chains, the callers never use chains, so m_get2() should suffice. Sponsored by: Nginx, Inc.
2013-03-15 10:20:15 +00:00
m = m_get2(len, M_NOWAIT, MT_DATA, 0);
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
if (m == NULL)
return NULL;
Use m_get2() + m_align() instead of hand made key_alloc_mbuf(). Code examination shows, that although key_alloc_mbuf() could return chains, the callers never use chains, so m_get2() should suffice. Sponsored by: Nginx, Inc.
2013-03-15 10:20:15 +00:00
m_align(m, len);
m->m_len = len;
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
p = mtod(m, struct sadb_key *);
bzero(p, len);
p->sadb_key_len = PFKEY_UNIT64(len);
p->sadb_key_exttype = exttype;
p->sadb_key_bits = src->bits;
bcopy(src->key_data, _KEYBUF(p), _KEYLEN(src));
return m;
}
/*
* Take one of the kernel's lifetime data structures and convert it
* into a PF_KEY structure within an mbuf, suitable for sending up to
* a waiting application in user land.
*
* IN:
* src: A pointer to a kernel lifetime structure.
* exttype: Which type of lifetime this is. Refer to the PF_KEY
* data structures for more information.
* OUT:
* a valid mbuf or NULL indicating an error
*
*/
static struct mbuf *
key_setlifetime(struct seclifetime *src, u_int16_t exttype)
{
struct mbuf *m = NULL;
struct sadb_lifetime *p;
int len = PFKEY_ALIGN8(sizeof(struct sadb_lifetime));
if (src == NULL)
return NULL;
Use m_get2() + m_align() instead of hand made key_alloc_mbuf(). Code examination shows, that although key_alloc_mbuf() could return chains, the callers never use chains, so m_get2() should suffice. Sponsored by: Nginx, Inc.
2013-03-15 10:20:15 +00:00
m = m_get2(len, M_NOWAIT, MT_DATA, 0);
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
if (m == NULL)
return m;
Use m_get2() + m_align() instead of hand made key_alloc_mbuf(). Code examination shows, that although key_alloc_mbuf() could return chains, the callers never use chains, so m_get2() should suffice. Sponsored by: Nginx, Inc.
2013-03-15 10:20:15 +00:00
m_align(m, len);
m->m_len = len;
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
p = mtod(m, struct sadb_lifetime *);
bzero(p, len);
p->sadb_lifetime_len = PFKEY_UNIT64(len);
p->sadb_lifetime_exttype = exttype;
p->sadb_lifetime_allocations = src->allocations;
p->sadb_lifetime_bytes = src->bytes;
p->sadb_lifetime_addtime = src->addtime;
p->sadb_lifetime_usetime = src->usetime;
return m;
}
Reference in New Issue Copy Permalink