d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
6a9fa0152c
freebsd-dev/sys/dev/mpt/mpt_debug.c

777 lines
25 KiB
C
Raw Normal View History

Start each of the license/copyright comments with /*-, minor shuffle of lines
2005-01-06 01:43:34 +00:00
/*-
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
* Debug routines for LSI '909 FC adapters.
* FreeBSD Version.
*
* Copyright (c) 2000, 2001 by Greg Ansley
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice immediately at the beginning of the file, without modification,
* this list of conditions, and the following disclaimer.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
Massive overhaul of MPT Fusion driver: o Add timeout error recovery (from a thread context to avoid the deferral of other critical interrupts). o Properly recover commands across controller reset events. o Update the driver to handle events and status codes that have been added to the MPI spec since the driver was originally written. o Make the driver more modular to improve maintainability and support dynamic "personality" registration (e.g. SCSI Initiator, RAID, SAS, FC, etc). o Shorten and simplify the common I/O path to improve driver performance. o Add RAID volume and RAID member state/settings reporting. o Add periodic volume resynchronization status reporting. o Add support for sysctl tunable resync rate, member write cache enable, and volume transaction queue depth. Sponsored by ---------------- Avid Technologies Inc: SCSI error recovery, driver re-organization, update of MPI library headers, portions of dynamic personality registration, and misc bug fixes. Wheel Open Technologies: RAID event notification, RAID member pass-thru support, firmware upload/download support, enhanced RAID resync speed, portions of dynamic personality registration, and misc bug fixes. Detailed Changes ================ mpt.c mpt_cam.c mpt_raid.c mpt_pci.c: o Add support for personality modules. Each module exports load, and unload module scope methods as well as probe, attach, event, reset, shutdown, and detach per-device instance methods mpt.c mpt.h mpt_pci.c: o The driver now associates a callback function (via an index) with every transaction submitted to the controller. This allows the main interrupt handler to absolve itself of any knowledge of individual transaction/response types by simply calling the callback function "registered" for the transaction. We use a callback index instead of a callback function pointer in each requests so we can properly handle responses (e.g. event notifications) that are not associated with a transaction. Personality modules dynamically register their callbacks with the driver core to receive the callback index to use for their handlers. o Move the interrupt handler into mpt.c. The ISR algorithm is bus transport and OS independent and thus had no reason to be in mpt_pci.c. o Simplify configuration message reply handling by copying reply frame data for the requester and storing completion status in the original request structure. o Add the mpt_complete_request_chain() helper method and use it to implement reset handlers that must abort transactions. o Keep track of all pending requests on the new requests_pending_list in the softc. o Add default handlers to mpt.c to handle generic event notifications and controller reset activities. The event handler code is largely the same as in the original driver. The reset handler is new and terminates any pending transactions with a status code indicating the controller needs to be re-initialized. o Add some endian support to the driver. A complete audit is still required for this driver to have any hope of operating in a big-endian environment. o Use inttypes.h and __inline. Come closer to being style(9) compliant. o Remove extraneous use of typedefs. o Convert request state from a strict enumeration to a series of flags. This allows us to, for example, tag transactions that have timed-out while retaining the state that the transaction is still in-flight on the controller. o Add mpt_wait_req() which allows a caller to poll or sleep for the completion of a request. Use this to simplify and factor code out from many initialization routines. We also use this to sleep for task management request completions in our CAM timeout handler. mpt.c: o Correct a bug in the event handler where request structures were freed even if the request reply was marked as a continuation reply. Continuation replies indicate that the controller still owns the request and freeing these replies prematurely corrupted controller state. o Implement firmware upload and download. On controllers that do not have dedicated NVRAM (as in the Sun v20/v40z), the firmware image is downloaded to the controller by the system BIOS. This image occupies precious controller RAM space until the host driver fetches the image, reducing the number of concurrent I/Os the controller can processes. The uploaded image is used to re-program the controller during hard reset events since the controller cannot fetch the firmware on its own. Implementing this feature allows much higher queue depths when RAID volumes are configured. o Changed configuration page accessors to allow threads to sleep rather than busy wait for completion. o Removed hard coded data transfer sizes from configuration page routines so that RAID configuration page processing is possible. mpt_reg.h: o Move controller register definitions into a separate file. mpt.h: o Re-arrange includes to allow inlined functions to be defined in mpt.h. o Add reply, event, and reset handler definitions. o Add softc fields for handling timeout and controller reset recovery. mpt_cam.c: o Move mpt_freebsd.c to mpt_cam.c. Move all core functionality, such as event handling, into mpt.c leaving only CAM SCSI support here. o Revamp completion handler to provide correct CAM status for all currently defined SCSI MPI message result codes. o Register event and reset handlers with the MPT core. Modify the event handler to notify CAM of bus reset events. The controller reset handler will abort any transactions that have timed out. All other pending CAM transactions are correctly aborted by the core driver's reset handler. o Allocate a single request up front to perform task management operations. This guarantees that we can always perform a TMF operation even when the controller is saturated with other operations. The single request also serves as a perfect mechanism of guaranteeing that only a single TMF is in flight at a time - something that is required according to the MPT Fusion documentation. o Add a helper function for issuing task management requests to the controller. This is used to abort individual requests or perform a bus reset. o Modify the CAM XPT_BUS_RESET ccb handler to wait for and properly handle the status of the bus reset task management frame used to reset the bus. The previous code assumed that the reset request would always succeed. o Add timeout recovery support. When a timeout occurs, the timed-out request is added to a queue to be processed by our recovery thread and the thread is woken up. The recovery thread processes timed-out command serially, attempting first to abort them and then falling back to a bus reset if an abort fails. o Add calls to mpt_reset() to reset the controller if any handshake command, bus reset attempt or abort attempt fails due to a timeout. o Export a secondary "bus" to CAM that exposes all volume drive members as pass-thru devices, allowing CAM to perform proper speed negotiation to hidden devices. o Add a CAM async event handler tracking the AC_FOUND_DEVICE event. Use this to trigger calls to set the per-volume queue depth once the volume is fully registered with CAM. This is required to avoid hitting firmware limits on volume queue depth. Exceeding the limit causes the firmware to hang. mpt_cam.h: o Add several helper functions for interfacing to CAM and performing timeout recovery. mpt_pci.c: o Disable interrupts on the controller before registering and enabling interrupt delivery to the OS. Otherwise we risk receiving interrupts before the driver is ready to receive them. o Make use of compatibility macros that allow the driver to be compiled under 4.x and 5.x. mpt_raid.c: o Add a per-controller instance RAID thread to perform settings changes and query status (minimizes CPU busy wait loops). o Use a shutdown handler to disable "Member Write Cache Enable" (MWCE) setting for RAID arrays set to enable MWCE During Rebuild. o Change reply handler function signature to allow handlers to defer the deletion of reply frames. Use this to allow the event reply handler to queue up events that need to be acked if no resources are available to immediately ack an event. Queued events are processed in mpt_free_request() where resources are freed. This avoids a panic on resource shortage. o Parse and print out RAID controller capabilities during driver probe. o Define, allocate, and maintain RAID data structures for volumes, hidden member physical disks and spare disks. o Add dynamic sysctls for per-instance setting of the log level, array resync rate, array member cache enable, and volume queue depth. mpt_debug.c: o Add mpt_lprt and mpt_lprtc for printing diagnostics conditioned on a particular log level to aid in tracking down driver issues. o Add mpt_decode_value() which parses the bits in an integer value based on a parsing table (mask, value, name string, tuples). mpilib/*: o Update mpi library header files to latest distribution from LSI. Submitted by: gibbs Approved by: re
2005-07-10 15:05:39 +00:00
*
Role a microrev of the MPI Library in preparation for target mode work. Make my portions of the license clearer. Thank Chris Ellsworth for his support in getting a bunch of this done.
2006-02-25 07:45:54 +00:00
*/
/*-
* Copyright (c) 2002, 2006 by Matthew Jacob
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon including
* a substantially similar Disclaimer requirement for further binary
* redistribution.
* 3. Neither the names of the above listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
* OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Support from Chris Ellsworth in order to make SAS adapters work
* is gratefully acknowledged.
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
*/
Fix where my automated script blew the SCM ID format conversion.
2004-08-21 17:44:57 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
Massive overhaul of MPT Fusion driver: o Add timeout error recovery (from a thread context to avoid the deferral of other critical interrupts). o Properly recover commands across controller reset events. o Update the driver to handle events and status codes that have been added to the MPI spec since the driver was originally written. o Make the driver more modular to improve maintainability and support dynamic "personality" registration (e.g. SCSI Initiator, RAID, SAS, FC, etc). o Shorten and simplify the common I/O path to improve driver performance. o Add RAID volume and RAID member state/settings reporting. o Add periodic volume resynchronization status reporting. o Add support for sysctl tunable resync rate, member write cache enable, and volume transaction queue depth. Sponsored by ---------------- Avid Technologies Inc: SCSI error recovery, driver re-organization, update of MPI library headers, portions of dynamic personality registration, and misc bug fixes. Wheel Open Technologies: RAID event notification, RAID member pass-thru support, firmware upload/download support, enhanced RAID resync speed, portions of dynamic personality registration, and misc bug fixes. Detailed Changes ================ mpt.c mpt_cam.c mpt_raid.c mpt_pci.c: o Add support for personality modules. Each module exports load, and unload module scope methods as well as probe, attach, event, reset, shutdown, and detach per-device instance methods mpt.c mpt.h mpt_pci.c: o The driver now associates a callback function (via an index) with every transaction submitted to the controller. This allows the main interrupt handler to absolve itself of any knowledge of individual transaction/response types by simply calling the callback function "registered" for the transaction. We use a callback index instead of a callback function pointer in each requests so we can properly handle responses (e.g. event notifications) that are not associated with a transaction. Personality modules dynamically register their callbacks with the driver core to receive the callback index to use for their handlers. o Move the interrupt handler into mpt.c. The ISR algorithm is bus transport and OS independent and thus had no reason to be in mpt_pci.c. o Simplify configuration message reply handling by copying reply frame data for the requester and storing completion status in the original request structure. o Add the mpt_complete_request_chain() helper method and use it to implement reset handlers that must abort transactions. o Keep track of all pending requests on the new requests_pending_list in the softc. o Add default handlers to mpt.c to handle generic event notifications and controller reset activities. The event handler code is largely the same as in the original driver. The reset handler is new and terminates any pending transactions with a status code indicating the controller needs to be re-initialized. o Add some endian support to the driver. A complete audit is still required for this driver to have any hope of operating in a big-endian environment. o Use inttypes.h and __inline. Come closer to being style(9) compliant. o Remove extraneous use of typedefs. o Convert request state from a strict enumeration to a series of flags. This allows us to, for example, tag transactions that have timed-out while retaining the state that the transaction is still in-flight on the controller. o Add mpt_wait_req() which allows a caller to poll or sleep for the completion of a request. Use this to simplify and factor code out from many initialization routines. We also use this to sleep for task management request completions in our CAM timeout handler. mpt.c: o Correct a bug in the event handler where request structures were freed even if the request reply was marked as a continuation reply. Continuation replies indicate that the controller still owns the request and freeing these replies prematurely corrupted controller state. o Implement firmware upload and download. On controllers that do not have dedicated NVRAM (as in the Sun v20/v40z), the firmware image is downloaded to the controller by the system BIOS. This image occupies precious controller RAM space until the host driver fetches the image, reducing the number of concurrent I/Os the controller can processes. The uploaded image is used to re-program the controller during hard reset events since the controller cannot fetch the firmware on its own. Implementing this feature allows much higher queue depths when RAID volumes are configured. o Changed configuration page accessors to allow threads to sleep rather than busy wait for completion. o Removed hard coded data transfer sizes from configuration page routines so that RAID configuration page processing is possible. mpt_reg.h: o Move controller register definitions into a separate file. mpt.h: o Re-arrange includes to allow inlined functions to be defined in mpt.h. o Add reply, event, and reset handler definitions. o Add softc fields for handling timeout and controller reset recovery. mpt_cam.c: o Move mpt_freebsd.c to mpt_cam.c. Move all core functionality, such as event handling, into mpt.c leaving only CAM SCSI support here. o Revamp completion handler to provide correct CAM status for all currently defined SCSI MPI message result codes. o Register event and reset handlers with the MPT core. Modify the event handler to notify CAM of bus reset events. The controller reset handler will abort any transactions that have timed out. All other pending CAM transactions are correctly aborted by the core driver's reset handler. o Allocate a single request up front to perform task management operations. This guarantees that we can always perform a TMF operation even when the controller is saturated with other operations. The single request also serves as a perfect mechanism of guaranteeing that only a single TMF is in flight at a time - something that is required according to the MPT Fusion documentation. o Add a helper function for issuing task management requests to the controller. This is used to abort individual requests or perform a bus reset. o Modify the CAM XPT_BUS_RESET ccb handler to wait for and properly handle the status of the bus reset task management frame used to reset the bus. The previous code assumed that the reset request would always succeed. o Add timeout recovery support. When a timeout occurs, the timed-out request is added to a queue to be processed by our recovery thread and the thread is woken up. The recovery thread processes timed-out command serially, attempting first to abort them and then falling back to a bus reset if an abort fails. o Add calls to mpt_reset() to reset the controller if any handshake command, bus reset attempt or abort attempt fails due to a timeout. o Export a secondary "bus" to CAM that exposes all volume drive members as pass-thru devices, allowing CAM to perform proper speed negotiation to hidden devices. o Add a CAM async event handler tracking the AC_FOUND_DEVICE event. Use this to trigger calls to set the per-volume queue depth once the volume is fully registered with CAM. This is required to avoid hitting firmware limits on volume queue depth. Exceeding the limit causes the firmware to hang. mpt_cam.h: o Add several helper functions for interfacing to CAM and performing timeout recovery. mpt_pci.c: o Disable interrupts on the controller before registering and enabling interrupt delivery to the OS. Otherwise we risk receiving interrupts before the driver is ready to receive them. o Make use of compatibility macros that allow the driver to be compiled under 4.x and 5.x. mpt_raid.c: o Add a per-controller instance RAID thread to perform settings changes and query status (minimizes CPU busy wait loops). o Use a shutdown handler to disable "Member Write Cache Enable" (MWCE) setting for RAID arrays set to enable MWCE During Rebuild. o Change reply handler function signature to allow handlers to defer the deletion of reply frames. Use this to allow the event reply handler to queue up events that need to be acked if no resources are available to immediately ack an event. Queued events are processed in mpt_free_request() where resources are freed. This avoids a panic on resource shortage. o Parse and print out RAID controller capabilities during driver probe. o Define, allocate, and maintain RAID data structures for volumes, hidden member physical disks and spare disks. o Add dynamic sysctls for per-instance setting of the log level, array resync rate, array member cache enable, and volume queue depth. mpt_debug.c: o Add mpt_lprt and mpt_lprtc for printing diagnostics conditioned on a particular log level to aid in tracking down driver issues. o Add mpt_decode_value() which parses the bits in an integer value based on a parsing table (mask, value, name string, tuples). mpilib/*: o Update mpi library header files to latest distribution from LSI. Submitted by: gibbs Approved by: re
2005-07-10 15:05:39 +00:00
#include <dev/mpt/mpt.h>
#include <dev/mpt/mpilib/mpi_ioc.h>
#include <dev/mpt/mpilib/mpi_init.h>
#include <dev/mpt/mpilib/mpi_fc.h>
#include <cam/scsi/scsi_all.h>
Code cleanup: use mpt_prt instead of device_printf.
2002-09-24 21:33:43 +00:00
#include <machine/stdarg.h> /* for use by mpt_prt below */
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
struct Error_Map {
int Error_Code;
char *Error_String;
};
static const struct Error_Map IOC_Status[] = {
{ MPI_IOCSTATUS_SUCCESS, "Success" },
{ MPI_IOCSTATUS_INVALID_FUNCTION, "IOC: Invalid Function" },
{ MPI_IOCSTATUS_BUSY, "IOC: Busy" },
{ MPI_IOCSTATUS_INVALID_SGL, "IOC: Invalid SGL" },
{ MPI_IOCSTATUS_INTERNAL_ERROR, "IOC: Internal Error" },
{ MPI_IOCSTATUS_RESERVED, "IOC: Reserved" },
{ MPI_IOCSTATUS_INSUFFICIENT_RESOURCES, "IOC: Insufficient Resources" },
{ MPI_IOCSTATUS_INVALID_FIELD, "IOC: Invalid Field" },
{ MPI_IOCSTATUS_INVALID_STATE, "IOC: Invalid State" },
{ MPI_IOCSTATUS_CONFIG_INVALID_ACTION, "Invalid Action" },
{ MPI_IOCSTATUS_CONFIG_INVALID_TYPE, "Invalid Type" },
{ MPI_IOCSTATUS_CONFIG_INVALID_PAGE, "Invalid Page" },
{ MPI_IOCSTATUS_CONFIG_INVALID_DATA, "Invalid Data" },
{ MPI_IOCSTATUS_CONFIG_NO_DEFAULTS, "No Defaults" },
{ MPI_IOCSTATUS_CONFIG_CANT_COMMIT, "Can't Commit" },
{ MPI_IOCSTATUS_SCSI_RECOVERED_ERROR, "SCSI: Recoverd Error" },
{ MPI_IOCSTATUS_SCSI_INVALID_BUS, "SCSI: Invalid Bus" },
{ MPI_IOCSTATUS_SCSI_INVALID_TARGETID, "SCSI: Invalid Target ID" },
{ MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE, "SCSI: Device Not There" },
{ MPI_IOCSTATUS_SCSI_DATA_OVERRUN, "SCSI: Data Overrun" },
{ MPI_IOCSTATUS_SCSI_DATA_UNDERRUN, "SCSI: Data Underrun" },
{ MPI_IOCSTATUS_SCSI_IO_DATA_ERROR, "SCSI: Data Error" },
{ MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR, "SCSI: Protocol Error" },
{ MPI_IOCSTATUS_SCSI_TASK_TERMINATED, "SCSI: Task Terminated" },
{ MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH, "SCSI: Residual Mismatch" },
{ MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED, "SCSI: Task Management Failed" },
{ MPI_IOCSTATUS_SCSI_IOC_TERMINATED, "SCSI: IOC Bus Reset" },
{ MPI_IOCSTATUS_SCSI_EXT_TERMINATED, "SCSI: External Bus Reset" },
{ MPI_IOCSTATUS_TARGET_PRIORITY_IO, "SCSI Target: Priority I/O" },
{ MPI_IOCSTATUS_TARGET_INVALID_PORT, "SCSI Target: Invalid Port" },
{ MPI_IOCSTATUS_TARGET_INVALID_IOCINDEX, "SCSI Target: Invalid IOC Index" },
{ MPI_IOCSTATUS_TARGET_ABORTED, "SCSI Target: Aborted" },
{ MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE, "SCSI Target: No Connection (Retryable)" },
{ MPI_IOCSTATUS_TARGET_NO_CONNECTION, "SCSI Target: No Connection" },
{ MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH,"SCSI Target: Transfer Count Mismatch" },
{ MPI_IOCSTATUS_TARGET_FC_ABORTED, "FC: Aborted" },
{ MPI_IOCSTATUS_TARGET_FC_RX_ID_INVALID, "FC: Recieve ID Invalid" },
{ MPI_IOCSTATUS_TARGET_FC_DID_INVALID, "FC: Recieve DID Invalid" },
{ MPI_IOCSTATUS_TARGET_FC_NODE_LOGGED_OUT,"FC: Node Logged Out" },
{ MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND, "LAN: Device Not Found" },
{ MPI_IOCSTATUS_LAN_DEVICE_FAILURE, "LAN: Device Not Failure" },
{ MPI_IOCSTATUS_LAN_TRANSMIT_ERROR, "LAN: Transmit Error" },
{ MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED, "LAN: Transmit Aborted" },
{ MPI_IOCSTATUS_LAN_RECEIVE_ERROR, "LAN: Recieve Error" },
{ MPI_IOCSTATUS_LAN_RECEIVE_ABORTED, "LAN: Recieve Aborted" },
{ MPI_IOCSTATUS_LAN_PARTIAL_PACKET, "LAN: Partial Packet" },
{ MPI_IOCSTATUS_LAN_CANCELED, "LAN: Canceled" },
{ -1, 0},
};
static const struct Error_Map IOC_Func[] = {
{ MPI_FUNCTION_SCSI_IO_REQUEST, "SCSI IO Request" },
{ MPI_FUNCTION_SCSI_TASK_MGMT, "SCSI Task Management" },
{ MPI_FUNCTION_IOC_INIT, "IOC Init" },
{ MPI_FUNCTION_IOC_FACTS, "IOC Facts" },
{ MPI_FUNCTION_CONFIG, "Config" },
{ MPI_FUNCTION_PORT_FACTS, "Port Facts" },
{ MPI_FUNCTION_PORT_ENABLE, "Port Enable" },
{ MPI_FUNCTION_EVENT_NOTIFICATION, "Event Notification" },
Massive overhaul of MPT Fusion driver: o Add timeout error recovery (from a thread context to avoid the deferral of other critical interrupts). o Properly recover commands across controller reset events. o Update the driver to handle events and status codes that have been added to the MPI spec since the driver was originally written. o Make the driver more modular to improve maintainability and support dynamic "personality" registration (e.g. SCSI Initiator, RAID, SAS, FC, etc). o Shorten and simplify the common I/O path to improve driver performance. o Add RAID volume and RAID member state/settings reporting. o Add periodic volume resynchronization status reporting. o Add support for sysctl tunable resync rate, member write cache enable, and volume transaction queue depth. Sponsored by ---------------- Avid Technologies Inc: SCSI error recovery, driver re-organization, update of MPI library headers, portions of dynamic personality registration, and misc bug fixes. Wheel Open Technologies: RAID event notification, RAID member pass-thru support, firmware upload/download support, enhanced RAID resync speed, portions of dynamic personality registration, and misc bug fixes. Detailed Changes ================ mpt.c mpt_cam.c mpt_raid.c mpt_pci.c: o Add support for personality modules. Each module exports load, and unload module scope methods as well as probe, attach, event, reset, shutdown, and detach per-device instance methods mpt.c mpt.h mpt_pci.c: o The driver now associates a callback function (via an index) with every transaction submitted to the controller. This allows the main interrupt handler to absolve itself of any knowledge of individual transaction/response types by simply calling the callback function "registered" for the transaction. We use a callback index instead of a callback function pointer in each requests so we can properly handle responses (e.g. event notifications) that are not associated with a transaction. Personality modules dynamically register their callbacks with the driver core to receive the callback index to use for their handlers. o Move the interrupt handler into mpt.c. The ISR algorithm is bus transport and OS independent and thus had no reason to be in mpt_pci.c. o Simplify configuration message reply handling by copying reply frame data for the requester and storing completion status in the original request structure. o Add the mpt_complete_request_chain() helper method and use it to implement reset handlers that must abort transactions. o Keep track of all pending requests on the new requests_pending_list in the softc. o Add default handlers to mpt.c to handle generic event notifications and controller reset activities. The event handler code is largely the same as in the original driver. The reset handler is new and terminates any pending transactions with a status code indicating the controller needs to be re-initialized. o Add some endian support to the driver. A complete audit is still required for this driver to have any hope of operating in a big-endian environment. o Use inttypes.h and __inline. Come closer to being style(9) compliant. o Remove extraneous use of typedefs. o Convert request state from a strict enumeration to a series of flags. This allows us to, for example, tag transactions that have timed-out while retaining the state that the transaction is still in-flight on the controller. o Add mpt_wait_req() which allows a caller to poll or sleep for the completion of a request. Use this to simplify and factor code out from many initialization routines. We also use this to sleep for task management request completions in our CAM timeout handler. mpt.c: o Correct a bug in the event handler where request structures were freed even if the request reply was marked as a continuation reply. Continuation replies indicate that the controller still owns the request and freeing these replies prematurely corrupted controller state. o Implement firmware upload and download. On controllers that do not have dedicated NVRAM (as in the Sun v20/v40z), the firmware image is downloaded to the controller by the system BIOS. This image occupies precious controller RAM space until the host driver fetches the image, reducing the number of concurrent I/Os the controller can processes. The uploaded image is used to re-program the controller during hard reset events since the controller cannot fetch the firmware on its own. Implementing this feature allows much higher queue depths when RAID volumes are configured. o Changed configuration page accessors to allow threads to sleep rather than busy wait for completion. o Removed hard coded data transfer sizes from configuration page routines so that RAID configuration page processing is possible. mpt_reg.h: o Move controller register definitions into a separate file. mpt.h: o Re-arrange includes to allow inlined functions to be defined in mpt.h. o Add reply, event, and reset handler definitions. o Add softc fields for handling timeout and controller reset recovery. mpt_cam.c: o Move mpt_freebsd.c to mpt_cam.c. Move all core functionality, such as event handling, into mpt.c leaving only CAM SCSI support here. o Revamp completion handler to provide correct CAM status for all currently defined SCSI MPI message result codes. o Register event and reset handlers with the MPT core. Modify the event handler to notify CAM of bus reset events. The controller reset handler will abort any transactions that have timed out. All other pending CAM transactions are correctly aborted by the core driver's reset handler. o Allocate a single request up front to perform task management operations. This guarantees that we can always perform a TMF operation even when the controller is saturated with other operations. The single request also serves as a perfect mechanism of guaranteeing that only a single TMF is in flight at a time - something that is required according to the MPT Fusion documentation. o Add a helper function for issuing task management requests to the controller. This is used to abort individual requests or perform a bus reset. o Modify the CAM XPT_BUS_RESET ccb handler to wait for and properly handle the status of the bus reset task management frame used to reset the bus. The previous code assumed that the reset request would always succeed. o Add timeout recovery support. When a timeout occurs, the timed-out request is added to a queue to be processed by our recovery thread and the thread is woken up. The recovery thread processes timed-out command serially, attempting first to abort them and then falling back to a bus reset if an abort fails. o Add calls to mpt_reset() to reset the controller if any handshake command, bus reset attempt or abort attempt fails due to a timeout. o Export a secondary "bus" to CAM that exposes all volume drive members as pass-thru devices, allowing CAM to perform proper speed negotiation to hidden devices. o Add a CAM async event handler tracking the AC_FOUND_DEVICE event. Use this to trigger calls to set the per-volume queue depth once the volume is fully registered with CAM. This is required to avoid hitting firmware limits on volume queue depth. Exceeding the limit causes the firmware to hang. mpt_cam.h: o Add several helper functions for interfacing to CAM and performing timeout recovery. mpt_pci.c: o Disable interrupts on the controller before registering and enabling interrupt delivery to the OS. Otherwise we risk receiving interrupts before the driver is ready to receive them. o Make use of compatibility macros that allow the driver to be compiled under 4.x and 5.x. mpt_raid.c: o Add a per-controller instance RAID thread to perform settings changes and query status (minimizes CPU busy wait loops). o Use a shutdown handler to disable "Member Write Cache Enable" (MWCE) setting for RAID arrays set to enable MWCE During Rebuild. o Change reply handler function signature to allow handlers to defer the deletion of reply frames. Use this to allow the event reply handler to queue up events that need to be acked if no resources are available to immediately ack an event. Queued events are processed in mpt_free_request() where resources are freed. This avoids a panic on resource shortage. o Parse and print out RAID controller capabilities during driver probe. o Define, allocate, and maintain RAID data structures for volumes, hidden member physical disks and spare disks. o Add dynamic sysctls for per-instance setting of the log level, array resync rate, array member cache enable, and volume queue depth. mpt_debug.c: o Add mpt_lprt and mpt_lprtc for printing diagnostics conditioned on a particular log level to aid in tracking down driver issues. o Add mpt_decode_value() which parses the bits in an integer value based on a parsing table (mask, value, name string, tuples). mpilib/*: o Update mpi library header files to latest distribution from LSI. Submitted by: gibbs Approved by: re
2005-07-10 15:05:39 +00:00
{ MPI_FUNCTION_EVENT_ACK, "Event Ack" },
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
{ MPI_FUNCTION_FW_DOWNLOAD, "FW Download" },
{ MPI_FUNCTION_TARGET_CMD_BUFFER_POST, "SCSI Target Command Buffer" },
{ MPI_FUNCTION_TARGET_ASSIST, "Target Assist" },
{ MPI_FUNCTION_TARGET_STATUS_SEND, "Target Status Send" },
{ MPI_FUNCTION_TARGET_MODE_ABORT, "Target Mode Abort" },
{ -1, 0},
};
static const struct Error_Map IOC_Event[] = {
{ MPI_EVENT_NONE, "None" },
{ MPI_EVENT_LOG_DATA, "LogData" },
{ MPI_EVENT_STATE_CHANGE, "State Change" },
{ MPI_EVENT_UNIT_ATTENTION, "Unit Attention" },
{ MPI_EVENT_IOC_BUS_RESET, "IOC Bus Reset" },
{ MPI_EVENT_EXT_BUS_RESET, "External Bus Reset" },
{ MPI_EVENT_RESCAN, "Rescan" },
{ MPI_EVENT_LINK_STATUS_CHANGE, "Link Status Change" },
{ MPI_EVENT_LOOP_STATE_CHANGE, "Loop State Change" },
{ MPI_EVENT_LOGOUT, "Logout" },
{ MPI_EVENT_EVENT_CHANGE, "EventChange" },
{ -1, 0},
};
static const struct Error_Map IOC_SCSIState[] = {
{ MPI_SCSI_STATE_AUTOSENSE_VALID, "AutoSense_Valid" },
{ MPI_SCSI_STATE_AUTOSENSE_FAILED, "AutoSense_Failed" },
{ MPI_SCSI_STATE_NO_SCSI_STATUS, "No_SCSI_Status" },
{ MPI_SCSI_STATE_TERMINATED, "State_Terminated" },
{ MPI_SCSI_STATE_RESPONSE_INFO_VALID, "Repsonse_Info_Valid" },
{ MPI_SCSI_STATE_QUEUE_TAG_REJECTED, "Queue Tag Rejected" },
{ -1, 0},
};
static const struct Error_Map IOC_SCSIStatus[] = {
{ SCSI_STATUS_OK, "OK" },
{ SCSI_STATUS_CHECK_COND, "Check Condition" },
{ SCSI_STATUS_COND_MET, "Check Condition Met" },
{ SCSI_STATUS_BUSY, "Busy" },
{ SCSI_STATUS_INTERMED, "Intermidiate Condition" },
{ SCSI_STATUS_INTERMED_COND_MET, "Intermidiate Condition Met" },
{ SCSI_STATUS_RESERV_CONFLICT, "Reservation Conflict" },
{ SCSI_STATUS_CMD_TERMINATED, "Command Terminated" },
{ SCSI_STATUS_QUEUE_FULL, "Queue Full" },
{ -1, 0},
};
static const struct Error_Map IOC_Diag[] = {
Massive overhaul of MPT Fusion driver: o Add timeout error recovery (from a thread context to avoid the deferral of other critical interrupts). o Properly recover commands across controller reset events. o Update the driver to handle events and status codes that have been added to the MPI spec since the driver was originally written. o Make the driver more modular to improve maintainability and support dynamic "personality" registration (e.g. SCSI Initiator, RAID, SAS, FC, etc). o Shorten and simplify the common I/O path to improve driver performance. o Add RAID volume and RAID member state/settings reporting. o Add periodic volume resynchronization status reporting. o Add support for sysctl tunable resync rate, member write cache enable, and volume transaction queue depth. Sponsored by ---------------- Avid Technologies Inc: SCSI error recovery, driver re-organization, update of MPI library headers, portions of dynamic personality registration, and misc bug fixes. Wheel Open Technologies: RAID event notification, RAID member pass-thru support, firmware upload/download support, enhanced RAID resync speed, portions of dynamic personality registration, and misc bug fixes. Detailed Changes ================ mpt.c mpt_cam.c mpt_raid.c mpt_pci.c: o Add support for personality modules. Each module exports load, and unload module scope methods as well as probe, attach, event, reset, shutdown, and detach per-device instance methods mpt.c mpt.h mpt_pci.c: o The driver now associates a callback function (via an index) with every transaction submitted to the controller. This allows the main interrupt handler to absolve itself of any knowledge of individual transaction/response types by simply calling the callback function "registered" for the transaction. We use a callback index instead of a callback function pointer in each requests so we can properly handle responses (e.g. event notifications) that are not associated with a transaction. Personality modules dynamically register their callbacks with the driver core to receive the callback index to use for their handlers. o Move the interrupt handler into mpt.c. The ISR algorithm is bus transport and OS independent and thus had no reason to be in mpt_pci.c. o Simplify configuration message reply handling by copying reply frame data for the requester and storing completion status in the original request structure. o Add the mpt_complete_request_chain() helper method and use it to implement reset handlers that must abort transactions. o Keep track of all pending requests on the new requests_pending_list in the softc. o Add default handlers to mpt.c to handle generic event notifications and controller reset activities. The event handler code is largely the same as in the original driver. The reset handler is new and terminates any pending transactions with a status code indicating the controller needs to be re-initialized. o Add some endian support to the driver. A complete audit is still required for this driver to have any hope of operating in a big-endian environment. o Use inttypes.h and __inline. Come closer to being style(9) compliant. o Remove extraneous use of typedefs. o Convert request state from a strict enumeration to a series of flags. This allows us to, for example, tag transactions that have timed-out while retaining the state that the transaction is still in-flight on the controller. o Add mpt_wait_req() which allows a caller to poll or sleep for the completion of a request. Use this to simplify and factor code out from many initialization routines. We also use this to sleep for task management request completions in our CAM timeout handler. mpt.c: o Correct a bug in the event handler where request structures were freed even if the request reply was marked as a continuation reply. Continuation replies indicate that the controller still owns the request and freeing these replies prematurely corrupted controller state. o Implement firmware upload and download. On controllers that do not have dedicated NVRAM (as in the Sun v20/v40z), the firmware image is downloaded to the controller by the system BIOS. This image occupies precious controller RAM space until the host driver fetches the image, reducing the number of concurrent I/Os the controller can processes. The uploaded image is used to re-program the controller during hard reset events since the controller cannot fetch the firmware on its own. Implementing this feature allows much higher queue depths when RAID volumes are configured. o Changed configuration page accessors to allow threads to sleep rather than busy wait for completion. o Removed hard coded data transfer sizes from configuration page routines so that RAID configuration page processing is possible. mpt_reg.h: o Move controller register definitions into a separate file. mpt.h: o Re-arrange includes to allow inlined functions to be defined in mpt.h. o Add reply, event, and reset handler definitions. o Add softc fields for handling timeout and controller reset recovery. mpt_cam.c: o Move mpt_freebsd.c to mpt_cam.c. Move all core functionality, such as event handling, into mpt.c leaving only CAM SCSI support here. o Revamp completion handler to provide correct CAM status for all currently defined SCSI MPI message result codes. o Register event and reset handlers with the MPT core. Modify the event handler to notify CAM of bus reset events. The controller reset handler will abort any transactions that have timed out. All other pending CAM transactions are correctly aborted by the core driver's reset handler. o Allocate a single request up front to perform task management operations. This guarantees that we can always perform a TMF operation even when the controller is saturated with other operations. The single request also serves as a perfect mechanism of guaranteeing that only a single TMF is in flight at a time - something that is required according to the MPT Fusion documentation. o Add a helper function for issuing task management requests to the controller. This is used to abort individual requests or perform a bus reset. o Modify the CAM XPT_BUS_RESET ccb handler to wait for and properly handle the status of the bus reset task management frame used to reset the bus. The previous code assumed that the reset request would always succeed. o Add timeout recovery support. When a timeout occurs, the timed-out request is added to a queue to be processed by our recovery thread and the thread is woken up. The recovery thread processes timed-out command serially, attempting first to abort them and then falling back to a bus reset if an abort fails. o Add calls to mpt_reset() to reset the controller if any handshake command, bus reset attempt or abort attempt fails due to a timeout. o Export a secondary "bus" to CAM that exposes all volume drive members as pass-thru devices, allowing CAM to perform proper speed negotiation to hidden devices. o Add a CAM async event handler tracking the AC_FOUND_DEVICE event. Use this to trigger calls to set the per-volume queue depth once the volume is fully registered with CAM. This is required to avoid hitting firmware limits on volume queue depth. Exceeding the limit causes the firmware to hang. mpt_cam.h: o Add several helper functions for interfacing to CAM and performing timeout recovery. mpt_pci.c: o Disable interrupts on the controller before registering and enabling interrupt delivery to the OS. Otherwise we risk receiving interrupts before the driver is ready to receive them. o Make use of compatibility macros that allow the driver to be compiled under 4.x and 5.x. mpt_raid.c: o Add a per-controller instance RAID thread to perform settings changes and query status (minimizes CPU busy wait loops). o Use a shutdown handler to disable "Member Write Cache Enable" (MWCE) setting for RAID arrays set to enable MWCE During Rebuild. o Change reply handler function signature to allow handlers to defer the deletion of reply frames. Use this to allow the event reply handler to queue up events that need to be acked if no resources are available to immediately ack an event. Queued events are processed in mpt_free_request() where resources are freed. This avoids a panic on resource shortage. o Parse and print out RAID controller capabilities during driver probe. o Define, allocate, and maintain RAID data structures for volumes, hidden member physical disks and spare disks. o Add dynamic sysctls for per-instance setting of the log level, array resync rate, array member cache enable, and volume queue depth. mpt_debug.c: o Add mpt_lprt and mpt_lprtc for printing diagnostics conditioned on a particular log level to aid in tracking down driver issues. o Add mpt_decode_value() which parses the bits in an integer value based on a parsing table (mask, value, name string, tuples). mpilib/*: o Update mpi library header files to latest distribution from LSI. Submitted by: gibbs Approved by: re
2005-07-10 15:05:39 +00:00
{ MPI_DIAG_DRWE, "DWE" },
{ MPI_DIAG_FLASH_BAD_SIG, "FLASH_Bad" },
{ MPI_DIAGNOSTIC_OFFSET, "Offset" },
{ MPI_DIAG_RESET_ADAPTER, "Reset" },
{ MPI_DIAG_DISABLE_ARM, "DisARM" },
{ MPI_DIAG_MEM_ENABLE, "DME" },
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
{ -1, 0 },
};
Massive overhaul of MPT Fusion driver: o Add timeout error recovery (from a thread context to avoid the deferral of other critical interrupts). o Properly recover commands across controller reset events. o Update the driver to handle events and status codes that have been added to the MPI spec since the driver was originally written. o Make the driver more modular to improve maintainability and support dynamic "personality" registration (e.g. SCSI Initiator, RAID, SAS, FC, etc). o Shorten and simplify the common I/O path to improve driver performance. o Add RAID volume and RAID member state/settings reporting. o Add periodic volume resynchronization status reporting. o Add support for sysctl tunable resync rate, member write cache enable, and volume transaction queue depth. Sponsored by ---------------- Avid Technologies Inc: SCSI error recovery, driver re-organization, update of MPI library headers, portions of dynamic personality registration, and misc bug fixes. Wheel Open Technologies: RAID event notification, RAID member pass-thru support, firmware upload/download support, enhanced RAID resync speed, portions of dynamic personality registration, and misc bug fixes. Detailed Changes ================ mpt.c mpt_cam.c mpt_raid.c mpt_pci.c: o Add support for personality modules. Each module exports load, and unload module scope methods as well as probe, attach, event, reset, shutdown, and detach per-device instance methods mpt.c mpt.h mpt_pci.c: o The driver now associates a callback function (via an index) with every transaction submitted to the controller. This allows the main interrupt handler to absolve itself of any knowledge of individual transaction/response types by simply calling the callback function "registered" for the transaction. We use a callback index instead of a callback function pointer in each requests so we can properly handle responses (e.g. event notifications) that are not associated with a transaction. Personality modules dynamically register their callbacks with the driver core to receive the callback index to use for their handlers. o Move the interrupt handler into mpt.c. The ISR algorithm is bus transport and OS independent and thus had no reason to be in mpt_pci.c. o Simplify configuration message reply handling by copying reply frame data for the requester and storing completion status in the original request structure. o Add the mpt_complete_request_chain() helper method and use it to implement reset handlers that must abort transactions. o Keep track of all pending requests on the new requests_pending_list in the softc. o Add default handlers to mpt.c to handle generic event notifications and controller reset activities. The event handler code is largely the same as in the original driver. The reset handler is new and terminates any pending transactions with a status code indicating the controller needs to be re-initialized. o Add some endian support to the driver. A complete audit is still required for this driver to have any hope of operating in a big-endian environment. o Use inttypes.h and __inline. Come closer to being style(9) compliant. o Remove extraneous use of typedefs. o Convert request state from a strict enumeration to a series of flags. This allows us to, for example, tag transactions that have timed-out while retaining the state that the transaction is still in-flight on the controller. o Add mpt_wait_req() which allows a caller to poll or sleep for the completion of a request. Use this to simplify and factor code out from many initialization routines. We also use this to sleep for task management request completions in our CAM timeout handler. mpt.c: o Correct a bug in the event handler where request structures were freed even if the request reply was marked as a continuation reply. Continuation replies indicate that the controller still owns the request and freeing these replies prematurely corrupted controller state. o Implement firmware upload and download. On controllers that do not have dedicated NVRAM (as in the Sun v20/v40z), the firmware image is downloaded to the controller by the system BIOS. This image occupies precious controller RAM space until the host driver fetches the image, reducing the number of concurrent I/Os the controller can processes. The uploaded image is used to re-program the controller during hard reset events since the controller cannot fetch the firmware on its own. Implementing this feature allows much higher queue depths when RAID volumes are configured. o Changed configuration page accessors to allow threads to sleep rather than busy wait for completion. o Removed hard coded data transfer sizes from configuration page routines so that RAID configuration page processing is possible. mpt_reg.h: o Move controller register definitions into a separate file. mpt.h: o Re-arrange includes to allow inlined functions to be defined in mpt.h. o Add reply, event, and reset handler definitions. o Add softc fields for handling timeout and controller reset recovery. mpt_cam.c: o Move mpt_freebsd.c to mpt_cam.c. Move all core functionality, such as event handling, into mpt.c leaving only CAM SCSI support here. o Revamp completion handler to provide correct CAM status for all currently defined SCSI MPI message result codes. o Register event and reset handlers with the MPT core. Modify the event handler to notify CAM of bus reset events. The controller reset handler will abort any transactions that have timed out. All other pending CAM transactions are correctly aborted by the core driver's reset handler. o Allocate a single request up front to perform task management operations. This guarantees that we can always perform a TMF operation even when the controller is saturated with other operations. The single request also serves as a perfect mechanism of guaranteeing that only a single TMF is in flight at a time - something that is required according to the MPT Fusion documentation. o Add a helper function for issuing task management requests to the controller. This is used to abort individual requests or perform a bus reset. o Modify the CAM XPT_BUS_RESET ccb handler to wait for and properly handle the status of the bus reset task management frame used to reset the bus. The previous code assumed that the reset request would always succeed. o Add timeout recovery support. When a timeout occurs, the timed-out request is added to a queue to be processed by our recovery thread and the thread is woken up. The recovery thread processes timed-out command serially, attempting first to abort them and then falling back to a bus reset if an abort fails. o Add calls to mpt_reset() to reset the controller if any handshake command, bus reset attempt or abort attempt fails due to a timeout. o Export a secondary "bus" to CAM that exposes all volume drive members as pass-thru devices, allowing CAM to perform proper speed negotiation to hidden devices. o Add a CAM async event handler tracking the AC_FOUND_DEVICE event. Use this to trigger calls to set the per-volume queue depth once the volume is fully registered with CAM. This is required to avoid hitting firmware limits on volume queue depth. Exceeding the limit causes the firmware to hang. mpt_cam.h: o Add several helper functions for interfacing to CAM and performing timeout recovery. mpt_pci.c: o Disable interrupts on the controller before registering and enabling interrupt delivery to the OS. Otherwise we risk receiving interrupts before the driver is ready to receive them. o Make use of compatibility macros that allow the driver to be compiled under 4.x and 5.x. mpt_raid.c: o Add a per-controller instance RAID thread to perform settings changes and query status (minimizes CPU busy wait loops). o Use a shutdown handler to disable "Member Write Cache Enable" (MWCE) setting for RAID arrays set to enable MWCE During Rebuild. o Change reply handler function signature to allow handlers to defer the deletion of reply frames. Use this to allow the event reply handler to queue up events that need to be acked if no resources are available to immediately ack an event. Queued events are processed in mpt_free_request() where resources are freed. This avoids a panic on resource shortage. o Parse and print out RAID controller capabilities during driver probe. o Define, allocate, and maintain RAID data structures for volumes, hidden member physical disks and spare disks. o Add dynamic sysctls for per-instance setting of the log level, array resync rate, array member cache enable, and volume queue depth. mpt_debug.c: o Add mpt_lprt and mpt_lprtc for printing diagnostics conditioned on a particular log level to aid in tracking down driver issues. o Add mpt_decode_value() which parses the bits in an integer value based on a parsing table (mask, value, name string, tuples). mpilib/*: o Update mpi library header files to latest distribution from LSI. Submitted by: gibbs Approved by: re
2005-07-10 15:05:39 +00:00
static const struct Error_Map IOC_SCSITMType[] = {
{ MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK, "Abort Task" },
{ MPI_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, "Abort Task Set" },
{ MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET, "Target Reset" },
{ MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS, "Reset Bus" },
{ MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET, "Logical Unit Reset" },
{ -1, 0 },
};
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
static char *
mpt_ioc_status(int code)
{
const struct Error_Map *status = IOC_Status;
static char buf[64];
while (status->Error_Code >= 0) {
if (status->Error_Code == (code & MPI_IOCSTATUS_MASK))
return status->Error_String;
status++;
}
snprintf(buf, sizeof buf, "Unknown (0x%08x)", code);
return buf;
}
char *
mpt_ioc_diag(u_int32_t code)
{
const struct Error_Map *status = IOC_Diag;
static char buf[128];
char *ptr = buf;
char *end = &buf[128];
buf[0] = '\0';
ptr += snprintf(buf, sizeof buf, "(0x%08x)", code);
while (status->Error_Code >= 0) {
if ((status->Error_Code & code) != 0)
ptr += snprintf(ptr, (size_t)(end-ptr), "%s ",
status->Error_String);
status++;
}
return buf;
}
static char *
mpt_ioc_function(int code)
{
const struct Error_Map *status = IOC_Func;
static char buf[64];
while (status->Error_Code >= 0) {
if (status->Error_Code == code)
return status->Error_String;
status++;
}
snprintf(buf, sizeof buf, "Unknown (0x%08x)", code);
return buf;
}
static char *
mpt_ioc_event(int code)
{
const struct Error_Map *status = IOC_Event;
static char buf[64];
while (status->Error_Code >= 0) {
if (status->Error_Code == code)
return status->Error_String;
status++;
}
snprintf(buf, sizeof buf, "Unknown (0x%08x)", code);
return buf;
}
static char *
mpt_scsi_state(int code)
{
const struct Error_Map *status = IOC_SCSIState;
static char buf[128];
char *ptr = buf;
char *end = &buf[128];
buf[0] = '\0';
ptr += snprintf(buf, sizeof buf, "(0x%08x)", code);
while (status->Error_Code >= 0) {
if ((status->Error_Code & code) != 0)
ptr += snprintf(ptr, (size_t)(end-ptr), "%s ",
status->Error_String);
status++;
}
return buf;
}
static char *
mpt_scsi_status(int code)
{
const struct Error_Map *status = IOC_SCSIStatus;
static char buf[64];
while (status->Error_Code >= 0) {
if (status->Error_Code == code)
return status->Error_String;
status++;
}
snprintf(buf, sizeof buf, "Unknown (0x%08x)", code);
return buf;
}
static char *
mpt_who(int who_init)
{
char *who;
switch (who_init) {
case MPT_DB_INIT_NOONE: who = "No One"; break;
case MPT_DB_INIT_BIOS: who = "BIOS"; break;
case MPT_DB_INIT_ROMBIOS: who = "ROM BIOS"; break;
case MPT_DB_INIT_PCIPEER: who = "PCI Peer"; break;
case MPT_DB_INIT_HOST: who = "Host Driver"; break;
case MPT_DB_INIT_MANUFACTURE: who = "Manufacturing"; break;
default: who = "Unknown"; break;
}
return who;
}
static char *
mpt_state(u_int32_t mb)
{
char *text;
switch (MPT_STATE(mb)) {
case MPT_DB_STATE_RESET: text = "Reset"; break;
case MPT_DB_STATE_READY: text = "Ready"; break;
case MPT_DB_STATE_RUNNING:text = "Running"; break;
case MPT_DB_STATE_FAULT: text = "Fault"; break;
default: text = "Unknown"; break;
}
return text;
Remove erroneous semicolons.
2004-07-13 16:06:19 +00:00
}
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
Massive overhaul of MPT Fusion driver: o Add timeout error recovery (from a thread context to avoid the deferral of other critical interrupts). o Properly recover commands across controller reset events. o Update the driver to handle events and status codes that have been added to the MPI spec since the driver was originally written. o Make the driver more modular to improve maintainability and support dynamic "personality" registration (e.g. SCSI Initiator, RAID, SAS, FC, etc). o Shorten and simplify the common I/O path to improve driver performance. o Add RAID volume and RAID member state/settings reporting. o Add periodic volume resynchronization status reporting. o Add support for sysctl tunable resync rate, member write cache enable, and volume transaction queue depth. Sponsored by ---------------- Avid Technologies Inc: SCSI error recovery, driver re-organization, update of MPI library headers, portions of dynamic personality registration, and misc bug fixes. Wheel Open Technologies: RAID event notification, RAID member pass-thru support, firmware upload/download support, enhanced RAID resync speed, portions of dynamic personality registration, and misc bug fixes. Detailed Changes ================ mpt.c mpt_cam.c mpt_raid.c mpt_pci.c: o Add support for personality modules. Each module exports load, and unload module scope methods as well as probe, attach, event, reset, shutdown, and detach per-device instance methods mpt.c mpt.h mpt_pci.c: o The driver now associates a callback function (via an index) with every transaction submitted to the controller. This allows the main interrupt handler to absolve itself of any knowledge of individual transaction/response types by simply calling the callback function "registered" for the transaction. We use a callback index instead of a callback function pointer in each requests so we can properly handle responses (e.g. event notifications) that are not associated with a transaction. Personality modules dynamically register their callbacks with the driver core to receive the callback index to use for their handlers. o Move the interrupt handler into mpt.c. The ISR algorithm is bus transport and OS independent and thus had no reason to be in mpt_pci.c. o Simplify configuration message reply handling by copying reply frame data for the requester and storing completion status in the original request structure. o Add the mpt_complete_request_chain() helper method and use it to implement reset handlers that must abort transactions. o Keep track of all pending requests on the new requests_pending_list in the softc. o Add default handlers to mpt.c to handle generic event notifications and controller reset activities. The event handler code is largely the same as in the original driver. The reset handler is new and terminates any pending transactions with a status code indicating the controller needs to be re-initialized. o Add some endian support to the driver. A complete audit is still required for this driver to have any hope of operating in a big-endian environment. o Use inttypes.h and __inline. Come closer to being style(9) compliant. o Remove extraneous use of typedefs. o Convert request state from a strict enumeration to a series of flags. This allows us to, for example, tag transactions that have timed-out while retaining the state that the transaction is still in-flight on the controller. o Add mpt_wait_req() which allows a caller to poll or sleep for the completion of a request. Use this to simplify and factor code out from many initialization routines. We also use this to sleep for task management request completions in our CAM timeout handler. mpt.c: o Correct a bug in the event handler where request structures were freed even if the request reply was marked as a continuation reply. Continuation replies indicate that the controller still owns the request and freeing these replies prematurely corrupted controller state. o Implement firmware upload and download. On controllers that do not have dedicated NVRAM (as in the Sun v20/v40z), the firmware image is downloaded to the controller by the system BIOS. This image occupies precious controller RAM space until the host driver fetches the image, reducing the number of concurrent I/Os the controller can processes. The uploaded image is used to re-program the controller during hard reset events since the controller cannot fetch the firmware on its own. Implementing this feature allows much higher queue depths when RAID volumes are configured. o Changed configuration page accessors to allow threads to sleep rather than busy wait for completion. o Removed hard coded data transfer sizes from configuration page routines so that RAID configuration page processing is possible. mpt_reg.h: o Move controller register definitions into a separate file. mpt.h: o Re-arrange includes to allow inlined functions to be defined in mpt.h. o Add reply, event, and reset handler definitions. o Add softc fields for handling timeout and controller reset recovery. mpt_cam.c: o Move mpt_freebsd.c to mpt_cam.c. Move all core functionality, such as event handling, into mpt.c leaving only CAM SCSI support here. o Revamp completion handler to provide correct CAM status for all currently defined SCSI MPI message result codes. o Register event and reset handlers with the MPT core. Modify the event handler to notify CAM of bus reset events. The controller reset handler will abort any transactions that have timed out. All other pending CAM transactions are correctly aborted by the core driver's reset handler. o Allocate a single request up front to perform task management operations. This guarantees that we can always perform a TMF operation even when the controller is saturated with other operations. The single request also serves as a perfect mechanism of guaranteeing that only a single TMF is in flight at a time - something that is required according to the MPT Fusion documentation. o Add a helper function for issuing task management requests to the controller. This is used to abort individual requests or perform a bus reset. o Modify the CAM XPT_BUS_RESET ccb handler to wait for and properly handle the status of the bus reset task management frame used to reset the bus. The previous code assumed that the reset request would always succeed. o Add timeout recovery support. When a timeout occurs, the timed-out request is added to a queue to be processed by our recovery thread and the thread is woken up. The recovery thread processes timed-out command serially, attempting first to abort them and then falling back to a bus reset if an abort fails. o Add calls to mpt_reset() to reset the controller if any handshake command, bus reset attempt or abort attempt fails due to a timeout. o Export a secondary "bus" to CAM that exposes all volume drive members as pass-thru devices, allowing CAM to perform proper speed negotiation to hidden devices. o Add a CAM async event handler tracking the AC_FOUND_DEVICE event. Use this to trigger calls to set the per-volume queue depth once the volume is fully registered with CAM. This is required to avoid hitting firmware limits on volume queue depth. Exceeding the limit causes the firmware to hang. mpt_cam.h: o Add several helper functions for interfacing to CAM and performing timeout recovery. mpt_pci.c: o Disable interrupts on the controller before registering and enabling interrupt delivery to the OS. Otherwise we risk receiving interrupts before the driver is ready to receive them. o Make use of compatibility macros that allow the driver to be compiled under 4.x and 5.x. mpt_raid.c: o Add a per-controller instance RAID thread to perform settings changes and query status (minimizes CPU busy wait loops). o Use a shutdown handler to disable "Member Write Cache Enable" (MWCE) setting for RAID arrays set to enable MWCE During Rebuild. o Change reply handler function signature to allow handlers to defer the deletion of reply frames. Use this to allow the event reply handler to queue up events that need to be acked if no resources are available to immediately ack an event. Queued events are processed in mpt_free_request() where resources are freed. This avoids a panic on resource shortage. o Parse and print out RAID controller capabilities during driver probe. o Define, allocate, and maintain RAID data structures for volumes, hidden member physical disks and spare disks. o Add dynamic sysctls for per-instance setting of the log level, array resync rate, array member cache enable, and volume queue depth. mpt_debug.c: o Add mpt_lprt and mpt_lprtc for printing diagnostics conditioned on a particular log level to aid in tracking down driver issues. o Add mpt_decode_value() which parses the bits in an integer value based on a parsing table (mask, value, name string, tuples). mpilib/*: o Update mpi library header files to latest distribution from LSI. Submitted by: gibbs Approved by: re
2005-07-10 15:05:39 +00:00
static char *
mpt_scsi_tm_type(int code)
{
const struct Error_Map *status = IOC_SCSITMType;
static char buf[64];
while (status->Error_Code >= 0) {
if (status->Error_Code == code)
return status->Error_String;
status++;
}
snprintf(buf, sizeof buf, "Unknown (0x%08x)", code);
return buf;
}
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
void
mpt_print_db(u_int32_t mb)
{
printf("mpt mailbox: (0x%x) State %s WhoInit %s\n",
mb, mpt_state(mb), mpt_who(MPT_WHO(mb)));
}
/*****************************************************************************/
/* Reply functions */
/*****************************************************************************/
static void
mpt_print_reply_hdr(MSG_DEFAULT_REPLY *msg)
{
printf("%s Reply @ %p\n", mpt_ioc_function(msg->Function), msg);
printf("\tIOC Status %s\n", mpt_ioc_status(msg->IOCStatus));
Remove the ill-considered effect of using the type definitions as distributed by LSI-Logic. For FreeBSD, just use the posix defines instead of trying to figure out how wide an int is. Apologies to all.
2006-02-26 22:50:14 +00:00
printf("\tIOCLogInfo 0x%08x\n", msg->IOCLogInfo);
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
printf("\tMsgLength 0x%02x\n", msg->MsgLength);
printf("\tMsgFlags 0x%02x\n", msg->MsgFlags);
Remove the ill-considered effect of using the type definitions as distributed by LSI-Logic. For FreeBSD, just use the posix defines instead of trying to figure out how wide an int is. Apologies to all.
2006-02-26 22:50:14 +00:00
printf("\tMsgContext 0x%08x\n", msg->MsgContext);
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
}
static void
mpt_print_init_reply(MSG_IOC_INIT_REPLY *msg)
{
mpt_print_reply_hdr((MSG_DEFAULT_REPLY *)msg);
printf("\tWhoInit %s\n", mpt_who(msg->WhoInit));
printf("\tMaxDevices 0x%02x\n", msg->MaxDevices);
printf("\tMaxBuses 0x%02x\n", msg->MaxBuses);
}
static void
mpt_print_ioc_facts(MSG_IOC_FACTS_REPLY *msg)
{
mpt_print_reply_hdr((MSG_DEFAULT_REPLY *)msg);
printf("\tIOCNumber %d\n", msg->IOCNumber);
printf("\tMaxChainDepth %d\n", msg->MaxChainDepth);
printf("\tWhoInit %s\n", mpt_who(msg->WhoInit));
printf("\tBlockSize %d\n", msg->BlockSize);
printf("\tFlags %d\n", msg->Flags);
printf("\tReplyQueueDepth %d\n", msg->ReplyQueueDepth);
printf("\tReqFrameSize 0x%04x\n", msg->RequestFrameSize);
Remove the ill-considered effect of using the type definitions as distributed by LSI-Logic. For FreeBSD, just use the posix defines instead of trying to figure out how wide an int is. Apologies to all.
2006-02-26 22:50:14 +00:00
printf("\tFW Version 0x%08x\n", msg->FWVersion.Word);
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
printf("\tProduct ID 0x%04x\n", msg->ProductID);
printf("\tCredits 0x%04x\n", msg->GlobalCredits);
printf("\tPorts %d\n", msg->NumberOfPorts);
printf("\tEventState 0x%02x\n", msg->EventState);
Remove the ill-considered effect of using the type definitions as distributed by LSI-Logic. For FreeBSD, just use the posix defines instead of trying to figure out how wide an int is. Apologies to all.
2006-02-26 22:50:14 +00:00
printf("\tHostMFA_HA 0x%08x\n", msg->CurrentHostMfaHighAddr);
printf("\tSenseBuf_HA 0x%08x\n",
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
msg->CurrentSenseBufferHighAddr);
printf("\tRepFrameSize 0x%04x\n", msg->CurReplyFrameSize);
printf("\tMaxDevices 0x%02x\n", msg->MaxDevices);
printf("\tMaxBuses 0x%02x\n", msg->MaxBuses);
Remove the ill-considered effect of using the type definitions as distributed by LSI-Logic. For FreeBSD, just use the posix defines instead of trying to figure out how wide an int is. Apologies to all.
2006-02-26 22:50:14 +00:00
printf("\tFWImageSize 0x%04x\n", msg->FWImageSize);
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
}
static void
mpt_print_enable_reply(MSG_PORT_ENABLE_REPLY *msg)
{
mpt_print_reply_hdr((MSG_DEFAULT_REPLY *)msg);
printf("\tPort: %d\n", msg->PortNumber);
}
static void
mpt_print_scsi_io_reply(MSG_SCSI_IO_REPLY *msg)
{
mpt_print_reply_hdr((MSG_DEFAULT_REPLY *)msg);
printf("\tBus: %d\n", msg->Bus);
printf("\tTargetID %d\n", msg->TargetID);
printf("\tCDBLength %d\n", msg->CDBLength);
printf("\tSCSI Status: %s\n", mpt_scsi_status(msg->SCSIStatus));
printf("\tSCSI State: %s\n", mpt_scsi_state(msg->SCSIState));
Remove the ill-considered effect of using the type definitions as distributed by LSI-Logic. For FreeBSD, just use the posix defines instead of trying to figure out how wide an int is. Apologies to all.
2006-02-26 22:50:14 +00:00
printf("\tTransferCnt 0x%04x\n", msg->TransferCount);
printf("\tSenseCnt 0x%04x\n", msg->SenseCount);
printf("\tResponseInfo 0x%08x\n", msg->ResponseInfo);
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
}
static void
mpt_print_event_notice(MSG_EVENT_NOTIFY_REPLY *msg)
{
mpt_print_reply_hdr((MSG_DEFAULT_REPLY *)msg);
printf("\tEvent: %s\n", mpt_ioc_event(msg->Event));
Remove the ill-considered effect of using the type definitions as distributed by LSI-Logic. For FreeBSD, just use the posix defines instead of trying to figure out how wide an int is. Apologies to all.
2006-02-26 22:50:14 +00:00
printf("\tEventContext 0x%04x\n", msg->EventContext);
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
printf("\tAckRequired %d\n", msg->AckRequired);
printf("\tEventDataLength %d\n", msg->EventDataLength);
printf("\tContinuation %d\n", msg->MsgFlags & 0x80);
switch(msg->Event) {
case MPI_EVENT_LOG_DATA:
Remove the ill-considered effect of using the type definitions as distributed by LSI-Logic. For FreeBSD, just use the posix defines instead of trying to figure out how wide an int is. Apologies to all.
2006-02-26 22:50:14 +00:00
printf("\tEvtLogData: 0x%04x\n", msg->Data[0]);
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
break;
case MPI_EVENT_UNIT_ATTENTION:
Remove the ill-considered effect of using the type definitions as distributed by LSI-Logic. For FreeBSD, just use the posix defines instead of trying to figure out how wide an int is. Apologies to all.
2006-02-26 22:50:14 +00:00
printf("\tTargetID: 0x%04x\n",
msg->Data[0] & 0xff);
printf("\tBus: 0x%04x\n",
(msg->Data[0] >> 8) & 0xff);
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
break;
case MPI_EVENT_IOC_BUS_RESET:
case MPI_EVENT_EXT_BUS_RESET:
case MPI_EVENT_RESCAN:
Remove the ill-considered effect of using the type definitions as distributed by LSI-Logic. For FreeBSD, just use the posix defines instead of trying to figure out how wide an int is. Apologies to all.
2006-02-26 22:50:14 +00:00
printf("\tPort: %d\n",
(msg->Data[0] >> 8) & 0xff);
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
break;
case MPI_EVENT_LINK_STATUS_CHANGE:
Remove the ill-considered effect of using the type definitions as distributed by LSI-Logic. For FreeBSD, just use the posix defines instead of trying to figure out how wide an int is. Apologies to all.
2006-02-26 22:50:14 +00:00
printf("\tLinkState: %d\n",
msg->Data[0] & 0xff);
printf("\tPort: %d\n",
(msg->Data[1] >> 8) & 0xff);
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
break;
case MPI_EVENT_LOOP_STATE_CHANGE:
Remove the ill-considered effect of using the type definitions as distributed by LSI-Logic. For FreeBSD, just use the posix defines instead of trying to figure out how wide an int is. Apologies to all.
2006-02-26 22:50:14 +00:00
printf("\tType: %d\n",
(msg->Data[0] >> 16) & 0xff);
printf("\tChar3: 0x%02x\n",
(msg->Data[0] >> 8) & 0xff);
printf("\tChar4: 0x%02x\n",
(msg->Data[0] ) & 0xff);
printf("\tPort: %d\n",
(msg->Data[1] >> 8) & 0xff);
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
break;
case MPI_EVENT_LOGOUT:
Remove the ill-considered effect of using the type definitions as distributed by LSI-Logic. For FreeBSD, just use the posix defines instead of trying to figure out how wide an int is. Apologies to all.
2006-02-26 22:50:14 +00:00
printf("\tN_PortId: 0x%04x\n", msg->Data[0]);
printf("\tPort: %d\n",
(msg->Data[1] >> 8) & 0xff);
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
break;
}
}
void
mpt_print_reply(void *vmsg)
{
MSG_DEFAULT_REPLY *msg = vmsg;
switch (msg->Function) {
case MPI_FUNCTION_EVENT_NOTIFICATION:
mpt_print_event_notice((MSG_EVENT_NOTIFY_REPLY *)msg);
break;
case MPI_FUNCTION_PORT_ENABLE:
mpt_print_enable_reply((MSG_PORT_ENABLE_REPLY *)msg);
break;
case MPI_FUNCTION_IOC_FACTS:
mpt_print_ioc_facts((MSG_IOC_FACTS_REPLY *)msg);
break;
case MPI_FUNCTION_IOC_INIT:
mpt_print_init_reply((MSG_IOC_INIT_REPLY *)msg);
break;
case MPI_FUNCTION_SCSI_IO_REQUEST:
mpt_print_scsi_io_reply((MSG_SCSI_IO_REPLY *)msg);
break;
default:
mpt_print_reply_hdr((MSG_DEFAULT_REPLY *)msg);
break;
}
}
/*****************************************************************************/
/* Request functions */
/*****************************************************************************/
static void
mpt_print_request_hdr(MSG_REQUEST_HEADER *req)
{
printf("%s @ %p\n", mpt_ioc_function(req->Function), req);
printf("\tChain Offset 0x%02x\n", req->ChainOffset);
printf("\tMsgFlags 0x%02x\n", req->MsgFlags);
Remove the ill-considered effect of using the type definitions as distributed by LSI-Logic. For FreeBSD, just use the posix defines instead of trying to figure out how wide an int is. Apologies to all.
2006-02-26 22:50:14 +00:00
printf("\tMsgContext 0x%08x\n", req->MsgContext);
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
}
void
mpt_print_scsi_io_request(MSG_SCSI_IO_REQUEST *orig_msg)
{
MSG_SCSI_IO_REQUEST local, *msg = &local;
int i;
bcopy(orig_msg, msg, sizeof (MSG_SCSI_IO_REQUEST));
mpt_print_request_hdr((MSG_REQUEST_HEADER *)msg);
printf("\tBus: %d\n", msg->Bus);
printf("\tTargetID %d\n", msg->TargetID);
printf("\tSenseBufferLength %d\n", msg->SenseBufferLength);
printf("\tLUN: 0x%0x\n", msg->LUN[1]);
Remove the ill-considered effect of using the type definitions as distributed by LSI-Logic. For FreeBSD, just use the posix defines instead of trying to figure out how wide an int is. Apologies to all.
2006-02-26 22:50:14 +00:00
printf("\tControl 0x%08x ", msg->Control);
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
#define MPI_PRINT_FIELD(x) \
case MPI_SCSIIO_CONTROL_ ## x : \
printf(" " #x " "); \
break
switch (msg->Control & MPI_SCSIIO_CONTROL_DATADIRECTION_MASK) {
MPI_PRINT_FIELD(NODATATRANSFER);
MPI_PRINT_FIELD(WRITE);
MPI_PRINT_FIELD(READ);
default:
printf(" Invalid DIR! ");
break;
}
switch (msg->Control & MPI_SCSIIO_CONTROL_TASKATTRIBUTE_MASK) {
MPI_PRINT_FIELD(SIMPLEQ);
MPI_PRINT_FIELD(HEADOFQ);
MPI_PRINT_FIELD(ORDEREDQ);
MPI_PRINT_FIELD(ACAQ);
MPI_PRINT_FIELD(UNTAGGED);
MPI_PRINT_FIELD(NO_DISCONNECT);
default:
printf(" Unknown attribute! ");
break;
}
printf("\n");
#undef MPI_PRINT_FIELD
Remove the ill-considered effect of using the type definitions as distributed by LSI-Logic. For FreeBSD, just use the posix defines instead of trying to figure out how wide an int is. Apologies to all.
2006-02-26 22:50:14 +00:00
printf("\tDataLength\t0x%08x\n", msg->DataLength);
printf("\tSenseBufAddr\t0x%08x\n", msg->SenseBufferLowAddr);
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
printf("\tCDB[0:%d]\t", msg->CDBLength);
for (i = 0; i < msg->CDBLength; i++)
printf("%02x ", msg->CDB[i]);
printf("\n");
Do initial cut of SAS HBA support. These controllers (106X) seem to support automatically both SATA and SAS drives. The async SAS event handling we catch but ignore at present (so automagic attach/detach isn't hooked up yet). Do 64 bit PCI support- we can now work on systems with > 4GB of memory. Do large transfer support- we now can support up to reported chain depth, or the length of our request area. We simply allocate additional request elements when we would run out of room for chain lists. Tested on Ultra320, FC and SAS controllers on AMD64 and i386 platforms. There were no RAID cards available for me to regression test. The error recovery for this driver still is pretty bad.
2006-02-11 01:35:29 +00:00
if ((msg->Control & MPI_SCSIIO_CONTROL_DATADIRECTION_MASK) !=
MPI_SCSIIO_CONTROL_NODATATRANSFER ) {
mpt_dump_sgl(&orig_msg->SGL,
((char *)&orig_msg->SGL)-(char *)orig_msg);
}
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
}
Massive overhaul of MPT Fusion driver: o Add timeout error recovery (from a thread context to avoid the deferral of other critical interrupts). o Properly recover commands across controller reset events. o Update the driver to handle events and status codes that have been added to the MPI spec since the driver was originally written. o Make the driver more modular to improve maintainability and support dynamic "personality" registration (e.g. SCSI Initiator, RAID, SAS, FC, etc). o Shorten and simplify the common I/O path to improve driver performance. o Add RAID volume and RAID member state/settings reporting. o Add periodic volume resynchronization status reporting. o Add support for sysctl tunable resync rate, member write cache enable, and volume transaction queue depth. Sponsored by ---------------- Avid Technologies Inc: SCSI error recovery, driver re-organization, update of MPI library headers, portions of dynamic personality registration, and misc bug fixes. Wheel Open Technologies: RAID event notification, RAID member pass-thru support, firmware upload/download support, enhanced RAID resync speed, portions of dynamic personality registration, and misc bug fixes. Detailed Changes ================ mpt.c mpt_cam.c mpt_raid.c mpt_pci.c: o Add support for personality modules. Each module exports load, and unload module scope methods as well as probe, attach, event, reset, shutdown, and detach per-device instance methods mpt.c mpt.h mpt_pci.c: o The driver now associates a callback function (via an index) with every transaction submitted to the controller. This allows the main interrupt handler to absolve itself of any knowledge of individual transaction/response types by simply calling the callback function "registered" for the transaction. We use a callback index instead of a callback function pointer in each requests so we can properly handle responses (e.g. event notifications) that are not associated with a transaction. Personality modules dynamically register their callbacks with the driver core to receive the callback index to use for their handlers. o Move the interrupt handler into mpt.c. The ISR algorithm is bus transport and OS independent and thus had no reason to be in mpt_pci.c. o Simplify configuration message reply handling by copying reply frame data for the requester and storing completion status in the original request structure. o Add the mpt_complete_request_chain() helper method and use it to implement reset handlers that must abort transactions. o Keep track of all pending requests on the new requests_pending_list in the softc. o Add default handlers to mpt.c to handle generic event notifications and controller reset activities. The event handler code is largely the same as in the original driver. The reset handler is new and terminates any pending transactions with a status code indicating the controller needs to be re-initialized. o Add some endian support to the driver. A complete audit is still required for this driver to have any hope of operating in a big-endian environment. o Use inttypes.h and __inline. Come closer to being style(9) compliant. o Remove extraneous use of typedefs. o Convert request state from a strict enumeration to a series of flags. This allows us to, for example, tag transactions that have timed-out while retaining the state that the transaction is still in-flight on the controller. o Add mpt_wait_req() which allows a caller to poll or sleep for the completion of a request. Use this to simplify and factor code out from many initialization routines. We also use this to sleep for task management request completions in our CAM timeout handler. mpt.c: o Correct a bug in the event handler where request structures were freed even if the request reply was marked as a continuation reply. Continuation replies indicate that the controller still owns the request and freeing these replies prematurely corrupted controller state. o Implement firmware upload and download. On controllers that do not have dedicated NVRAM (as in the Sun v20/v40z), the firmware image is downloaded to the controller by the system BIOS. This image occupies precious controller RAM space until the host driver fetches the image, reducing the number of concurrent I/Os the controller can processes. The uploaded image is used to re-program the controller during hard reset events since the controller cannot fetch the firmware on its own. Implementing this feature allows much higher queue depths when RAID volumes are configured. o Changed configuration page accessors to allow threads to sleep rather than busy wait for completion. o Removed hard coded data transfer sizes from configuration page routines so that RAID configuration page processing is possible. mpt_reg.h: o Move controller register definitions into a separate file. mpt.h: o Re-arrange includes to allow inlined functions to be defined in mpt.h. o Add reply, event, and reset handler definitions. o Add softc fields for handling timeout and controller reset recovery. mpt_cam.c: o Move mpt_freebsd.c to mpt_cam.c. Move all core functionality, such as event handling, into mpt.c leaving only CAM SCSI support here. o Revamp completion handler to provide correct CAM status for all currently defined SCSI MPI message result codes. o Register event and reset handlers with the MPT core. Modify the event handler to notify CAM of bus reset events. The controller reset handler will abort any transactions that have timed out. All other pending CAM transactions are correctly aborted by the core driver's reset handler. o Allocate a single request up front to perform task management operations. This guarantees that we can always perform a TMF operation even when the controller is saturated with other operations. The single request also serves as a perfect mechanism of guaranteeing that only a single TMF is in flight at a time - something that is required according to the MPT Fusion documentation. o Add a helper function for issuing task management requests to the controller. This is used to abort individual requests or perform a bus reset. o Modify the CAM XPT_BUS_RESET ccb handler to wait for and properly handle the status of the bus reset task management frame used to reset the bus. The previous code assumed that the reset request would always succeed. o Add timeout recovery support. When a timeout occurs, the timed-out request is added to a queue to be processed by our recovery thread and the thread is woken up. The recovery thread processes timed-out command serially, attempting first to abort them and then falling back to a bus reset if an abort fails. o Add calls to mpt_reset() to reset the controller if any handshake command, bus reset attempt or abort attempt fails due to a timeout. o Export a secondary "bus" to CAM that exposes all volume drive members as pass-thru devices, allowing CAM to perform proper speed negotiation to hidden devices. o Add a CAM async event handler tracking the AC_FOUND_DEVICE event. Use this to trigger calls to set the per-volume queue depth once the volume is fully registered with CAM. This is required to avoid hitting firmware limits on volume queue depth. Exceeding the limit causes the firmware to hang. mpt_cam.h: o Add several helper functions for interfacing to CAM and performing timeout recovery. mpt_pci.c: o Disable interrupts on the controller before registering and enabling interrupt delivery to the OS. Otherwise we risk receiving interrupts before the driver is ready to receive them. o Make use of compatibility macros that allow the driver to be compiled under 4.x and 5.x. mpt_raid.c: o Add a per-controller instance RAID thread to perform settings changes and query status (minimizes CPU busy wait loops). o Use a shutdown handler to disable "Member Write Cache Enable" (MWCE) setting for RAID arrays set to enable MWCE During Rebuild. o Change reply handler function signature to allow handlers to defer the deletion of reply frames. Use this to allow the event reply handler to queue up events that need to be acked if no resources are available to immediately ack an event. Queued events are processed in mpt_free_request() where resources are freed. This avoids a panic on resource shortage. o Parse and print out RAID controller capabilities during driver probe. o Define, allocate, and maintain RAID data structures for volumes, hidden member physical disks and spare disks. o Add dynamic sysctls for per-instance setting of the log level, array resync rate, array member cache enable, and volume queue depth. mpt_debug.c: o Add mpt_lprt and mpt_lprtc for printing diagnostics conditioned on a particular log level to aid in tracking down driver issues. o Add mpt_decode_value() which parses the bits in an integer value based on a parsing table (mask, value, name string, tuples). mpilib/*: o Update mpi library header files to latest distribution from LSI. Submitted by: gibbs Approved by: re
2005-07-10 15:05:39 +00:00
static void
mpt_print_scsi_tmf_request(MSG_SCSI_TASK_MGMT *msg)
{
mpt_print_request_hdr((MSG_REQUEST_HEADER *)msg);
printf("\tLun 0x%02x\n", msg->LUN[1]);
printf("\tTaskType %s\n", mpt_scsi_tm_type(msg->TaskType));
Remove the ill-considered effect of using the type definitions as distributed by LSI-Logic. For FreeBSD, just use the posix defines instead of trying to figure out how wide an int is. Apologies to all.
2006-02-26 22:50:14 +00:00
printf("\tTaskMsgContext 0x%08x\n", msg->TaskMsgContext);
Massive overhaul of MPT Fusion driver: o Add timeout error recovery (from a thread context to avoid the deferral of other critical interrupts). o Properly recover commands across controller reset events. o Update the driver to handle events and status codes that have been added to the MPI spec since the driver was originally written. o Make the driver more modular to improve maintainability and support dynamic "personality" registration (e.g. SCSI Initiator, RAID, SAS, FC, etc). o Shorten and simplify the common I/O path to improve driver performance. o Add RAID volume and RAID member state/settings reporting. o Add periodic volume resynchronization status reporting. o Add support for sysctl tunable resync rate, member write cache enable, and volume transaction queue depth. Sponsored by ---------------- Avid Technologies Inc: SCSI error recovery, driver re-organization, update of MPI library headers, portions of dynamic personality registration, and misc bug fixes. Wheel Open Technologies: RAID event notification, RAID member pass-thru support, firmware upload/download support, enhanced RAID resync speed, portions of dynamic personality registration, and misc bug fixes. Detailed Changes ================ mpt.c mpt_cam.c mpt_raid.c mpt_pci.c: o Add support for personality modules. Each module exports load, and unload module scope methods as well as probe, attach, event, reset, shutdown, and detach per-device instance methods mpt.c mpt.h mpt_pci.c: o The driver now associates a callback function (via an index) with every transaction submitted to the controller. This allows the main interrupt handler to absolve itself of any knowledge of individual transaction/response types by simply calling the callback function "registered" for the transaction. We use a callback index instead of a callback function pointer in each requests so we can properly handle responses (e.g. event notifications) that are not associated with a transaction. Personality modules dynamically register their callbacks with the driver core to receive the callback index to use for their handlers. o Move the interrupt handler into mpt.c. The ISR algorithm is bus transport and OS independent and thus had no reason to be in mpt_pci.c. o Simplify configuration message reply handling by copying reply frame data for the requester and storing completion status in the original request structure. o Add the mpt_complete_request_chain() helper method and use it to implement reset handlers that must abort transactions. o Keep track of all pending requests on the new requests_pending_list in the softc. o Add default handlers to mpt.c to handle generic event notifications and controller reset activities. The event handler code is largely the same as in the original driver. The reset handler is new and terminates any pending transactions with a status code indicating the controller needs to be re-initialized. o Add some endian support to the driver. A complete audit is still required for this driver to have any hope of operating in a big-endian environment. o Use inttypes.h and __inline. Come closer to being style(9) compliant. o Remove extraneous use of typedefs. o Convert request state from a strict enumeration to a series of flags. This allows us to, for example, tag transactions that have timed-out while retaining the state that the transaction is still in-flight on the controller. o Add mpt_wait_req() which allows a caller to poll or sleep for the completion of a request. Use this to simplify and factor code out from many initialization routines. We also use this to sleep for task management request completions in our CAM timeout handler. mpt.c: o Correct a bug in the event handler where request structures were freed even if the request reply was marked as a continuation reply. Continuation replies indicate that the controller still owns the request and freeing these replies prematurely corrupted controller state. o Implement firmware upload and download. On controllers that do not have dedicated NVRAM (as in the Sun v20/v40z), the firmware image is downloaded to the controller by the system BIOS. This image occupies precious controller RAM space until the host driver fetches the image, reducing the number of concurrent I/Os the controller can processes. The uploaded image is used to re-program the controller during hard reset events since the controller cannot fetch the firmware on its own. Implementing this feature allows much higher queue depths when RAID volumes are configured. o Changed configuration page accessors to allow threads to sleep rather than busy wait for completion. o Removed hard coded data transfer sizes from configuration page routines so that RAID configuration page processing is possible. mpt_reg.h: o Move controller register definitions into a separate file. mpt.h: o Re-arrange includes to allow inlined functions to be defined in mpt.h. o Add reply, event, and reset handler definitions. o Add softc fields for handling timeout and controller reset recovery. mpt_cam.c: o Move mpt_freebsd.c to mpt_cam.c. Move all core functionality, such as event handling, into mpt.c leaving only CAM SCSI support here. o Revamp completion handler to provide correct CAM status for all currently defined SCSI MPI message result codes. o Register event and reset handlers with the MPT core. Modify the event handler to notify CAM of bus reset events. The controller reset handler will abort any transactions that have timed out. All other pending CAM transactions are correctly aborted by the core driver's reset handler. o Allocate a single request up front to perform task management operations. This guarantees that we can always perform a TMF operation even when the controller is saturated with other operations. The single request also serves as a perfect mechanism of guaranteeing that only a single TMF is in flight at a time - something that is required according to the MPT Fusion documentation. o Add a helper function for issuing task management requests to the controller. This is used to abort individual requests or perform a bus reset. o Modify the CAM XPT_BUS_RESET ccb handler to wait for and properly handle the status of the bus reset task management frame used to reset the bus. The previous code assumed that the reset request would always succeed. o Add timeout recovery support. When a timeout occurs, the timed-out request is added to a queue to be processed by our recovery thread and the thread is woken up. The recovery thread processes timed-out command serially, attempting first to abort them and then falling back to a bus reset if an abort fails. o Add calls to mpt_reset() to reset the controller if any handshake command, bus reset attempt or abort attempt fails due to a timeout. o Export a secondary "bus" to CAM that exposes all volume drive members as pass-thru devices, allowing CAM to perform proper speed negotiation to hidden devices. o Add a CAM async event handler tracking the AC_FOUND_DEVICE event. Use this to trigger calls to set the per-volume queue depth once the volume is fully registered with CAM. This is required to avoid hitting firmware limits on volume queue depth. Exceeding the limit causes the firmware to hang. mpt_cam.h: o Add several helper functions for interfacing to CAM and performing timeout recovery. mpt_pci.c: o Disable interrupts on the controller before registering and enabling interrupt delivery to the OS. Otherwise we risk receiving interrupts before the driver is ready to receive them. o Make use of compatibility macros that allow the driver to be compiled under 4.x and 5.x. mpt_raid.c: o Add a per-controller instance RAID thread to perform settings changes and query status (minimizes CPU busy wait loops). o Use a shutdown handler to disable "Member Write Cache Enable" (MWCE) setting for RAID arrays set to enable MWCE During Rebuild. o Change reply handler function signature to allow handlers to defer the deletion of reply frames. Use this to allow the event reply handler to queue up events that need to be acked if no resources are available to immediately ack an event. Queued events are processed in mpt_free_request() where resources are freed. This avoids a panic on resource shortage. o Parse and print out RAID controller capabilities during driver probe. o Define, allocate, and maintain RAID data structures for volumes, hidden member physical disks and spare disks. o Add dynamic sysctls for per-instance setting of the log level, array resync rate, array member cache enable, and volume queue depth. mpt_debug.c: o Add mpt_lprt and mpt_lprtc for printing diagnostics conditioned on a particular log level to aid in tracking down driver issues. o Add mpt_decode_value() which parses the bits in an integer value based on a parsing table (mask, value, name string, tuples). mpilib/*: o Update mpi library header files to latest distribution from LSI. Submitted by: gibbs Approved by: re
2005-07-10 15:05:39 +00:00
}
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
void
mpt_print_request(void *vreq)
{
MSG_REQUEST_HEADER *req = vreq;
switch (req->Function) {
case MPI_FUNCTION_SCSI_IO_REQUEST:
mpt_print_scsi_io_request((MSG_SCSI_IO_REQUEST *)req);
break;
Massive overhaul of MPT Fusion driver: o Add timeout error recovery (from a thread context to avoid the deferral of other critical interrupts). o Properly recover commands across controller reset events. o Update the driver to handle events and status codes that have been added to the MPI spec since the driver was originally written. o Make the driver more modular to improve maintainability and support dynamic "personality" registration (e.g. SCSI Initiator, RAID, SAS, FC, etc). o Shorten and simplify the common I/O path to improve driver performance. o Add RAID volume and RAID member state/settings reporting. o Add periodic volume resynchronization status reporting. o Add support for sysctl tunable resync rate, member write cache enable, and volume transaction queue depth. Sponsored by ---------------- Avid Technologies Inc: SCSI error recovery, driver re-organization, update of MPI library headers, portions of dynamic personality registration, and misc bug fixes. Wheel Open Technologies: RAID event notification, RAID member pass-thru support, firmware upload/download support, enhanced RAID resync speed, portions of dynamic personality registration, and misc bug fixes. Detailed Changes ================ mpt.c mpt_cam.c mpt_raid.c mpt_pci.c: o Add support for personality modules. Each module exports load, and unload module scope methods as well as probe, attach, event, reset, shutdown, and detach per-device instance methods mpt.c mpt.h mpt_pci.c: o The driver now associates a callback function (via an index) with every transaction submitted to the controller. This allows the main interrupt handler to absolve itself of any knowledge of individual transaction/response types by simply calling the callback function "registered" for the transaction. We use a callback index instead of a callback function pointer in each requests so we can properly handle responses (e.g. event notifications) that are not associated with a transaction. Personality modules dynamically register their callbacks with the driver core to receive the callback index to use for their handlers. o Move the interrupt handler into mpt.c. The ISR algorithm is bus transport and OS independent and thus had no reason to be in mpt_pci.c. o Simplify configuration message reply handling by copying reply frame data for the requester and storing completion status in the original request structure. o Add the mpt_complete_request_chain() helper method and use it to implement reset handlers that must abort transactions. o Keep track of all pending requests on the new requests_pending_list in the softc. o Add default handlers to mpt.c to handle generic event notifications and controller reset activities. The event handler code is largely the same as in the original driver. The reset handler is new and terminates any pending transactions with a status code indicating the controller needs to be re-initialized. o Add some endian support to the driver. A complete audit is still required for this driver to have any hope of operating in a big-endian environment. o Use inttypes.h and __inline. Come closer to being style(9) compliant. o Remove extraneous use of typedefs. o Convert request state from a strict enumeration to a series of flags. This allows us to, for example, tag transactions that have timed-out while retaining the state that the transaction is still in-flight on the controller. o Add mpt_wait_req() which allows a caller to poll or sleep for the completion of a request. Use this to simplify and factor code out from many initialization routines. We also use this to sleep for task management request completions in our CAM timeout handler. mpt.c: o Correct a bug in the event handler where request structures were freed even if the request reply was marked as a continuation reply. Continuation replies indicate that the controller still owns the request and freeing these replies prematurely corrupted controller state. o Implement firmware upload and download. On controllers that do not have dedicated NVRAM (as in the Sun v20/v40z), the firmware image is downloaded to the controller by the system BIOS. This image occupies precious controller RAM space until the host driver fetches the image, reducing the number of concurrent I/Os the controller can processes. The uploaded image is used to re-program the controller during hard reset events since the controller cannot fetch the firmware on its own. Implementing this feature allows much higher queue depths when RAID volumes are configured. o Changed configuration page accessors to allow threads to sleep rather than busy wait for completion. o Removed hard coded data transfer sizes from configuration page routines so that RAID configuration page processing is possible. mpt_reg.h: o Move controller register definitions into a separate file. mpt.h: o Re-arrange includes to allow inlined functions to be defined in mpt.h. o Add reply, event, and reset handler definitions. o Add softc fields for handling timeout and controller reset recovery. mpt_cam.c: o Move mpt_freebsd.c to mpt_cam.c. Move all core functionality, such as event handling, into mpt.c leaving only CAM SCSI support here. o Revamp completion handler to provide correct CAM status for all currently defined SCSI MPI message result codes. o Register event and reset handlers with the MPT core. Modify the event handler to notify CAM of bus reset events. The controller reset handler will abort any transactions that have timed out. All other pending CAM transactions are correctly aborted by the core driver's reset handler. o Allocate a single request up front to perform task management operations. This guarantees that we can always perform a TMF operation even when the controller is saturated with other operations. The single request also serves as a perfect mechanism of guaranteeing that only a single TMF is in flight at a time - something that is required according to the MPT Fusion documentation. o Add a helper function for issuing task management requests to the controller. This is used to abort individual requests or perform a bus reset. o Modify the CAM XPT_BUS_RESET ccb handler to wait for and properly handle the status of the bus reset task management frame used to reset the bus. The previous code assumed that the reset request would always succeed. o Add timeout recovery support. When a timeout occurs, the timed-out request is added to a queue to be processed by our recovery thread and the thread is woken up. The recovery thread processes timed-out command serially, attempting first to abort them and then falling back to a bus reset if an abort fails. o Add calls to mpt_reset() to reset the controller if any handshake command, bus reset attempt or abort attempt fails due to a timeout. o Export a secondary "bus" to CAM that exposes all volume drive members as pass-thru devices, allowing CAM to perform proper speed negotiation to hidden devices. o Add a CAM async event handler tracking the AC_FOUND_DEVICE event. Use this to trigger calls to set the per-volume queue depth once the volume is fully registered with CAM. This is required to avoid hitting firmware limits on volume queue depth. Exceeding the limit causes the firmware to hang. mpt_cam.h: o Add several helper functions for interfacing to CAM and performing timeout recovery. mpt_pci.c: o Disable interrupts on the controller before registering and enabling interrupt delivery to the OS. Otherwise we risk receiving interrupts before the driver is ready to receive them. o Make use of compatibility macros that allow the driver to be compiled under 4.x and 5.x. mpt_raid.c: o Add a per-controller instance RAID thread to perform settings changes and query status (minimizes CPU busy wait loops). o Use a shutdown handler to disable "Member Write Cache Enable" (MWCE) setting for RAID arrays set to enable MWCE During Rebuild. o Change reply handler function signature to allow handlers to defer the deletion of reply frames. Use this to allow the event reply handler to queue up events that need to be acked if no resources are available to immediately ack an event. Queued events are processed in mpt_free_request() where resources are freed. This avoids a panic on resource shortage. o Parse and print out RAID controller capabilities during driver probe. o Define, allocate, and maintain RAID data structures for volumes, hidden member physical disks and spare disks. o Add dynamic sysctls for per-instance setting of the log level, array resync rate, array member cache enable, and volume queue depth. mpt_debug.c: o Add mpt_lprt and mpt_lprtc for printing diagnostics conditioned on a particular log level to aid in tracking down driver issues. o Add mpt_decode_value() which parses the bits in an integer value based on a parsing table (mask, value, name string, tuples). mpilib/*: o Update mpi library header files to latest distribution from LSI. Submitted by: gibbs Approved by: re
2005-07-10 15:05:39 +00:00
case MPI_FUNCTION_SCSI_TASK_MGMT:
mpt_print_scsi_tmf_request((MSG_SCSI_TASK_MGMT *)req);
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
default:
mpt_print_request_hdr(req);
break;
}
}
Massive overhaul of MPT Fusion driver: o Add timeout error recovery (from a thread context to avoid the deferral of other critical interrupts). o Properly recover commands across controller reset events. o Update the driver to handle events and status codes that have been added to the MPI spec since the driver was originally written. o Make the driver more modular to improve maintainability and support dynamic "personality" registration (e.g. SCSI Initiator, RAID, SAS, FC, etc). o Shorten and simplify the common I/O path to improve driver performance. o Add RAID volume and RAID member state/settings reporting. o Add periodic volume resynchronization status reporting. o Add support for sysctl tunable resync rate, member write cache enable, and volume transaction queue depth. Sponsored by ---------------- Avid Technologies Inc: SCSI error recovery, driver re-organization, update of MPI library headers, portions of dynamic personality registration, and misc bug fixes. Wheel Open Technologies: RAID event notification, RAID member pass-thru support, firmware upload/download support, enhanced RAID resync speed, portions of dynamic personality registration, and misc bug fixes. Detailed Changes ================ mpt.c mpt_cam.c mpt_raid.c mpt_pci.c: o Add support for personality modules. Each module exports load, and unload module scope methods as well as probe, attach, event, reset, shutdown, and detach per-device instance methods mpt.c mpt.h mpt_pci.c: o The driver now associates a callback function (via an index) with every transaction submitted to the controller. This allows the main interrupt handler to absolve itself of any knowledge of individual transaction/response types by simply calling the callback function "registered" for the transaction. We use a callback index instead of a callback function pointer in each requests so we can properly handle responses (e.g. event notifications) that are not associated with a transaction. Personality modules dynamically register their callbacks with the driver core to receive the callback index to use for their handlers. o Move the interrupt handler into mpt.c. The ISR algorithm is bus transport and OS independent and thus had no reason to be in mpt_pci.c. o Simplify configuration message reply handling by copying reply frame data for the requester and storing completion status in the original request structure. o Add the mpt_complete_request_chain() helper method and use it to implement reset handlers that must abort transactions. o Keep track of all pending requests on the new requests_pending_list in the softc. o Add default handlers to mpt.c to handle generic event notifications and controller reset activities. The event handler code is largely the same as in the original driver. The reset handler is new and terminates any pending transactions with a status code indicating the controller needs to be re-initialized. o Add some endian support to the driver. A complete audit is still required for this driver to have any hope of operating in a big-endian environment. o Use inttypes.h and __inline. Come closer to being style(9) compliant. o Remove extraneous use of typedefs. o Convert request state from a strict enumeration to a series of flags. This allows us to, for example, tag transactions that have timed-out while retaining the state that the transaction is still in-flight on the controller. o Add mpt_wait_req() which allows a caller to poll or sleep for the completion of a request. Use this to simplify and factor code out from many initialization routines. We also use this to sleep for task management request completions in our CAM timeout handler. mpt.c: o Correct a bug in the event handler where request structures were freed even if the request reply was marked as a continuation reply. Continuation replies indicate that the controller still owns the request and freeing these replies prematurely corrupted controller state. o Implement firmware upload and download. On controllers that do not have dedicated NVRAM (as in the Sun v20/v40z), the firmware image is downloaded to the controller by the system BIOS. This image occupies precious controller RAM space until the host driver fetches the image, reducing the number of concurrent I/Os the controller can processes. The uploaded image is used to re-program the controller during hard reset events since the controller cannot fetch the firmware on its own. Implementing this feature allows much higher queue depths when RAID volumes are configured. o Changed configuration page accessors to allow threads to sleep rather than busy wait for completion. o Removed hard coded data transfer sizes from configuration page routines so that RAID configuration page processing is possible. mpt_reg.h: o Move controller register definitions into a separate file. mpt.h: o Re-arrange includes to allow inlined functions to be defined in mpt.h. o Add reply, event, and reset handler definitions. o Add softc fields for handling timeout and controller reset recovery. mpt_cam.c: o Move mpt_freebsd.c to mpt_cam.c. Move all core functionality, such as event handling, into mpt.c leaving only CAM SCSI support here. o Revamp completion handler to provide correct CAM status for all currently defined SCSI MPI message result codes. o Register event and reset handlers with the MPT core. Modify the event handler to notify CAM of bus reset events. The controller reset handler will abort any transactions that have timed out. All other pending CAM transactions are correctly aborted by the core driver's reset handler. o Allocate a single request up front to perform task management operations. This guarantees that we can always perform a TMF operation even when the controller is saturated with other operations. The single request also serves as a perfect mechanism of guaranteeing that only a single TMF is in flight at a time - something that is required according to the MPT Fusion documentation. o Add a helper function for issuing task management requests to the controller. This is used to abort individual requests or perform a bus reset. o Modify the CAM XPT_BUS_RESET ccb handler to wait for and properly handle the status of the bus reset task management frame used to reset the bus. The previous code assumed that the reset request would always succeed. o Add timeout recovery support. When a timeout occurs, the timed-out request is added to a queue to be processed by our recovery thread and the thread is woken up. The recovery thread processes timed-out command serially, attempting first to abort them and then falling back to a bus reset if an abort fails. o Add calls to mpt_reset() to reset the controller if any handshake command, bus reset attempt or abort attempt fails due to a timeout. o Export a secondary "bus" to CAM that exposes all volume drive members as pass-thru devices, allowing CAM to perform proper speed negotiation to hidden devices. o Add a CAM async event handler tracking the AC_FOUND_DEVICE event. Use this to trigger calls to set the per-volume queue depth once the volume is fully registered with CAM. This is required to avoid hitting firmware limits on volume queue depth. Exceeding the limit causes the firmware to hang. mpt_cam.h: o Add several helper functions for interfacing to CAM and performing timeout recovery. mpt_pci.c: o Disable interrupts on the controller before registering and enabling interrupt delivery to the OS. Otherwise we risk receiving interrupts before the driver is ready to receive them. o Make use of compatibility macros that allow the driver to be compiled under 4.x and 5.x. mpt_raid.c: o Add a per-controller instance RAID thread to perform settings changes and query status (minimizes CPU busy wait loops). o Use a shutdown handler to disable "Member Write Cache Enable" (MWCE) setting for RAID arrays set to enable MWCE During Rebuild. o Change reply handler function signature to allow handlers to defer the deletion of reply frames. Use this to allow the event reply handler to queue up events that need to be acked if no resources are available to immediately ack an event. Queued events are processed in mpt_free_request() where resources are freed. This avoids a panic on resource shortage. o Parse and print out RAID controller capabilities during driver probe. o Define, allocate, and maintain RAID data structures for volumes, hidden member physical disks and spare disks. o Add dynamic sysctls for per-instance setting of the log level, array resync rate, array member cache enable, and volume queue depth. mpt_debug.c: o Add mpt_lprt and mpt_lprtc for printing diagnostics conditioned on a particular log level to aid in tracking down driver issues. o Add mpt_decode_value() which parses the bits in an integer value based on a parsing table (mask, value, name string, tuples). mpilib/*: o Update mpi library header files to latest distribution from LSI. Submitted by: gibbs Approved by: re
2005-07-10 15:05:39 +00:00
int
mpt_decode_value(mpt_decode_entry_t *table, u_int num_entries,
const char *name, u_int value, u_int *cur_column,
u_int wrap_point)
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
{
Massive overhaul of MPT Fusion driver: o Add timeout error recovery (from a thread context to avoid the deferral of other critical interrupts). o Properly recover commands across controller reset events. o Update the driver to handle events and status codes that have been added to the MPI spec since the driver was originally written. o Make the driver more modular to improve maintainability and support dynamic "personality" registration (e.g. SCSI Initiator, RAID, SAS, FC, etc). o Shorten and simplify the common I/O path to improve driver performance. o Add RAID volume and RAID member state/settings reporting. o Add periodic volume resynchronization status reporting. o Add support for sysctl tunable resync rate, member write cache enable, and volume transaction queue depth. Sponsored by ---------------- Avid Technologies Inc: SCSI error recovery, driver re-organization, update of MPI library headers, portions of dynamic personality registration, and misc bug fixes. Wheel Open Technologies: RAID event notification, RAID member pass-thru support, firmware upload/download support, enhanced RAID resync speed, portions of dynamic personality registration, and misc bug fixes. Detailed Changes ================ mpt.c mpt_cam.c mpt_raid.c mpt_pci.c: o Add support for personality modules. Each module exports load, and unload module scope methods as well as probe, attach, event, reset, shutdown, and detach per-device instance methods mpt.c mpt.h mpt_pci.c: o The driver now associates a callback function (via an index) with every transaction submitted to the controller. This allows the main interrupt handler to absolve itself of any knowledge of individual transaction/response types by simply calling the callback function "registered" for the transaction. We use a callback index instead of a callback function pointer in each requests so we can properly handle responses (e.g. event notifications) that are not associated with a transaction. Personality modules dynamically register their callbacks with the driver core to receive the callback index to use for their handlers. o Move the interrupt handler into mpt.c. The ISR algorithm is bus transport and OS independent and thus had no reason to be in mpt_pci.c. o Simplify configuration message reply handling by copying reply frame data for the requester and storing completion status in the original request structure. o Add the mpt_complete_request_chain() helper method and use it to implement reset handlers that must abort transactions. o Keep track of all pending requests on the new requests_pending_list in the softc. o Add default handlers to mpt.c to handle generic event notifications and controller reset activities. The event handler code is largely the same as in the original driver. The reset handler is new and terminates any pending transactions with a status code indicating the controller needs to be re-initialized. o Add some endian support to the driver. A complete audit is still required for this driver to have any hope of operating in a big-endian environment. o Use inttypes.h and __inline. Come closer to being style(9) compliant. o Remove extraneous use of typedefs. o Convert request state from a strict enumeration to a series of flags. This allows us to, for example, tag transactions that have timed-out while retaining the state that the transaction is still in-flight on the controller. o Add mpt_wait_req() which allows a caller to poll or sleep for the completion of a request. Use this to simplify and factor code out from many initialization routines. We also use this to sleep for task management request completions in our CAM timeout handler. mpt.c: o Correct a bug in the event handler where request structures were freed even if the request reply was marked as a continuation reply. Continuation replies indicate that the controller still owns the request and freeing these replies prematurely corrupted controller state. o Implement firmware upload and download. On controllers that do not have dedicated NVRAM (as in the Sun v20/v40z), the firmware image is downloaded to the controller by the system BIOS. This image occupies precious controller RAM space until the host driver fetches the image, reducing the number of concurrent I/Os the controller can processes. The uploaded image is used to re-program the controller during hard reset events since the controller cannot fetch the firmware on its own. Implementing this feature allows much higher queue depths when RAID volumes are configured. o Changed configuration page accessors to allow threads to sleep rather than busy wait for completion. o Removed hard coded data transfer sizes from configuration page routines so that RAID configuration page processing is possible. mpt_reg.h: o Move controller register definitions into a separate file. mpt.h: o Re-arrange includes to allow inlined functions to be defined in mpt.h. o Add reply, event, and reset handler definitions. o Add softc fields for handling timeout and controller reset recovery. mpt_cam.c: o Move mpt_freebsd.c to mpt_cam.c. Move all core functionality, such as event handling, into mpt.c leaving only CAM SCSI support here. o Revamp completion handler to provide correct CAM status for all currently defined SCSI MPI message result codes. o Register event and reset handlers with the MPT core. Modify the event handler to notify CAM of bus reset events. The controller reset handler will abort any transactions that have timed out. All other pending CAM transactions are correctly aborted by the core driver's reset handler. o Allocate a single request up front to perform task management operations. This guarantees that we can always perform a TMF operation even when the controller is saturated with other operations. The single request also serves as a perfect mechanism of guaranteeing that only a single TMF is in flight at a time - something that is required according to the MPT Fusion documentation. o Add a helper function for issuing task management requests to the controller. This is used to abort individual requests or perform a bus reset. o Modify the CAM XPT_BUS_RESET ccb handler to wait for and properly handle the status of the bus reset task management frame used to reset the bus. The previous code assumed that the reset request would always succeed. o Add timeout recovery support. When a timeout occurs, the timed-out request is added to a queue to be processed by our recovery thread and the thread is woken up. The recovery thread processes timed-out command serially, attempting first to abort them and then falling back to a bus reset if an abort fails. o Add calls to mpt_reset() to reset the controller if any handshake command, bus reset attempt or abort attempt fails due to a timeout. o Export a secondary "bus" to CAM that exposes all volume drive members as pass-thru devices, allowing CAM to perform proper speed negotiation to hidden devices. o Add a CAM async event handler tracking the AC_FOUND_DEVICE event. Use this to trigger calls to set the per-volume queue depth once the volume is fully registered with CAM. This is required to avoid hitting firmware limits on volume queue depth. Exceeding the limit causes the firmware to hang. mpt_cam.h: o Add several helper functions for interfacing to CAM and performing timeout recovery. mpt_pci.c: o Disable interrupts on the controller before registering and enabling interrupt delivery to the OS. Otherwise we risk receiving interrupts before the driver is ready to receive them. o Make use of compatibility macros that allow the driver to be compiled under 4.x and 5.x. mpt_raid.c: o Add a per-controller instance RAID thread to perform settings changes and query status (minimizes CPU busy wait loops). o Use a shutdown handler to disable "Member Write Cache Enable" (MWCE) setting for RAID arrays set to enable MWCE During Rebuild. o Change reply handler function signature to allow handlers to defer the deletion of reply frames. Use this to allow the event reply handler to queue up events that need to be acked if no resources are available to immediately ack an event. Queued events are processed in mpt_free_request() where resources are freed. This avoids a panic on resource shortage. o Parse and print out RAID controller capabilities during driver probe. o Define, allocate, and maintain RAID data structures for volumes, hidden member physical disks and spare disks. o Add dynamic sysctls for per-instance setting of the log level, array resync rate, array member cache enable, and volume queue depth. mpt_debug.c: o Add mpt_lprt and mpt_lprtc for printing diagnostics conditioned on a particular log level to aid in tracking down driver issues. o Add mpt_decode_value() which parses the bits in an integer value based on a parsing table (mask, value, name string, tuples). mpilib/*: o Update mpi library header files to latest distribution from LSI. Submitted by: gibbs Approved by: re
2005-07-10 15:05:39 +00:00
int printed;
u_int printed_mask;
u_int dummy_column;
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
Massive overhaul of MPT Fusion driver: o Add timeout error recovery (from a thread context to avoid the deferral of other critical interrupts). o Properly recover commands across controller reset events. o Update the driver to handle events and status codes that have been added to the MPI spec since the driver was originally written. o Make the driver more modular to improve maintainability and support dynamic "personality" registration (e.g. SCSI Initiator, RAID, SAS, FC, etc). o Shorten and simplify the common I/O path to improve driver performance. o Add RAID volume and RAID member state/settings reporting. o Add periodic volume resynchronization status reporting. o Add support for sysctl tunable resync rate, member write cache enable, and volume transaction queue depth. Sponsored by ---------------- Avid Technologies Inc: SCSI error recovery, driver re-organization, update of MPI library headers, portions of dynamic personality registration, and misc bug fixes. Wheel Open Technologies: RAID event notification, RAID member pass-thru support, firmware upload/download support, enhanced RAID resync speed, portions of dynamic personality registration, and misc bug fixes. Detailed Changes ================ mpt.c mpt_cam.c mpt_raid.c mpt_pci.c: o Add support for personality modules. Each module exports load, and unload module scope methods as well as probe, attach, event, reset, shutdown, and detach per-device instance methods mpt.c mpt.h mpt_pci.c: o The driver now associates a callback function (via an index) with every transaction submitted to the controller. This allows the main interrupt handler to absolve itself of any knowledge of individual transaction/response types by simply calling the callback function "registered" for the transaction. We use a callback index instead of a callback function pointer in each requests so we can properly handle responses (e.g. event notifications) that are not associated with a transaction. Personality modules dynamically register their callbacks with the driver core to receive the callback index to use for their handlers. o Move the interrupt handler into mpt.c. The ISR algorithm is bus transport and OS independent and thus had no reason to be in mpt_pci.c. o Simplify configuration message reply handling by copying reply frame data for the requester and storing completion status in the original request structure. o Add the mpt_complete_request_chain() helper method and use it to implement reset handlers that must abort transactions. o Keep track of all pending requests on the new requests_pending_list in the softc. o Add default handlers to mpt.c to handle generic event notifications and controller reset activities. The event handler code is largely the same as in the original driver. The reset handler is new and terminates any pending transactions with a status code indicating the controller needs to be re-initialized. o Add some endian support to the driver. A complete audit is still required for this driver to have any hope of operating in a big-endian environment. o Use inttypes.h and __inline. Come closer to being style(9) compliant. o Remove extraneous use of typedefs. o Convert request state from a strict enumeration to a series of flags. This allows us to, for example, tag transactions that have timed-out while retaining the state that the transaction is still in-flight on the controller. o Add mpt_wait_req() which allows a caller to poll or sleep for the completion of a request. Use this to simplify and factor code out from many initialization routines. We also use this to sleep for task management request completions in our CAM timeout handler. mpt.c: o Correct a bug in the event handler where request structures were freed even if the request reply was marked as a continuation reply. Continuation replies indicate that the controller still owns the request and freeing these replies prematurely corrupted controller state. o Implement firmware upload and download. On controllers that do not have dedicated NVRAM (as in the Sun v20/v40z), the firmware image is downloaded to the controller by the system BIOS. This image occupies precious controller RAM space until the host driver fetches the image, reducing the number of concurrent I/Os the controller can processes. The uploaded image is used to re-program the controller during hard reset events since the controller cannot fetch the firmware on its own. Implementing this feature allows much higher queue depths when RAID volumes are configured. o Changed configuration page accessors to allow threads to sleep rather than busy wait for completion. o Removed hard coded data transfer sizes from configuration page routines so that RAID configuration page processing is possible. mpt_reg.h: o Move controller register definitions into a separate file. mpt.h: o Re-arrange includes to allow inlined functions to be defined in mpt.h. o Add reply, event, and reset handler definitions. o Add softc fields for handling timeout and controller reset recovery. mpt_cam.c: o Move mpt_freebsd.c to mpt_cam.c. Move all core functionality, such as event handling, into mpt.c leaving only CAM SCSI support here. o Revamp completion handler to provide correct CAM status for all currently defined SCSI MPI message result codes. o Register event and reset handlers with the MPT core. Modify the event handler to notify CAM of bus reset events. The controller reset handler will abort any transactions that have timed out. All other pending CAM transactions are correctly aborted by the core driver's reset handler. o Allocate a single request up front to perform task management operations. This guarantees that we can always perform a TMF operation even when the controller is saturated with other operations. The single request also serves as a perfect mechanism of guaranteeing that only a single TMF is in flight at a time - something that is required according to the MPT Fusion documentation. o Add a helper function for issuing task management requests to the controller. This is used to abort individual requests or perform a bus reset. o Modify the CAM XPT_BUS_RESET ccb handler to wait for and properly handle the status of the bus reset task management frame used to reset the bus. The previous code assumed that the reset request would always succeed. o Add timeout recovery support. When a timeout occurs, the timed-out request is added to a queue to be processed by our recovery thread and the thread is woken up. The recovery thread processes timed-out command serially, attempting first to abort them and then falling back to a bus reset if an abort fails. o Add calls to mpt_reset() to reset the controller if any handshake command, bus reset attempt or abort attempt fails due to a timeout. o Export a secondary "bus" to CAM that exposes all volume drive members as pass-thru devices, allowing CAM to perform proper speed negotiation to hidden devices. o Add a CAM async event handler tracking the AC_FOUND_DEVICE event. Use this to trigger calls to set the per-volume queue depth once the volume is fully registered with CAM. This is required to avoid hitting firmware limits on volume queue depth. Exceeding the limit causes the firmware to hang. mpt_cam.h: o Add several helper functions for interfacing to CAM and performing timeout recovery. mpt_pci.c: o Disable interrupts on the controller before registering and enabling interrupt delivery to the OS. Otherwise we risk receiving interrupts before the driver is ready to receive them. o Make use of compatibility macros that allow the driver to be compiled under 4.x and 5.x. mpt_raid.c: o Add a per-controller instance RAID thread to perform settings changes and query status (minimizes CPU busy wait loops). o Use a shutdown handler to disable "Member Write Cache Enable" (MWCE) setting for RAID arrays set to enable MWCE During Rebuild. o Change reply handler function signature to allow handlers to defer the deletion of reply frames. Use this to allow the event reply handler to queue up events that need to be acked if no resources are available to immediately ack an event. Queued events are processed in mpt_free_request() where resources are freed. This avoids a panic on resource shortage. o Parse and print out RAID controller capabilities during driver probe. o Define, allocate, and maintain RAID data structures for volumes, hidden member physical disks and spare disks. o Add dynamic sysctls for per-instance setting of the log level, array resync rate, array member cache enable, and volume queue depth. mpt_debug.c: o Add mpt_lprt and mpt_lprtc for printing diagnostics conditioned on a particular log level to aid in tracking down driver issues. o Add mpt_decode_value() which parses the bits in an integer value based on a parsing table (mask, value, name string, tuples). mpilib/*: o Update mpi library header files to latest distribution from LSI. Submitted by: gibbs Approved by: re
2005-07-10 15:05:39 +00:00
if (cur_column == NULL) {
dummy_column = 0;
cur_column = &dummy_column;
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
}
Massive overhaul of MPT Fusion driver: o Add timeout error recovery (from a thread context to avoid the deferral of other critical interrupts). o Properly recover commands across controller reset events. o Update the driver to handle events and status codes that have been added to the MPI spec since the driver was originally written. o Make the driver more modular to improve maintainability and support dynamic "personality" registration (e.g. SCSI Initiator, RAID, SAS, FC, etc). o Shorten and simplify the common I/O path to improve driver performance. o Add RAID volume and RAID member state/settings reporting. o Add periodic volume resynchronization status reporting. o Add support for sysctl tunable resync rate, member write cache enable, and volume transaction queue depth. Sponsored by ---------------- Avid Technologies Inc: SCSI error recovery, driver re-organization, update of MPI library headers, portions of dynamic personality registration, and misc bug fixes. Wheel Open Technologies: RAID event notification, RAID member pass-thru support, firmware upload/download support, enhanced RAID resync speed, portions of dynamic personality registration, and misc bug fixes. Detailed Changes ================ mpt.c mpt_cam.c mpt_raid.c mpt_pci.c: o Add support for personality modules. Each module exports load, and unload module scope methods as well as probe, attach, event, reset, shutdown, and detach per-device instance methods mpt.c mpt.h mpt_pci.c: o The driver now associates a callback function (via an index) with every transaction submitted to the controller. This allows the main interrupt handler to absolve itself of any knowledge of individual transaction/response types by simply calling the callback function "registered" for the transaction. We use a callback index instead of a callback function pointer in each requests so we can properly handle responses (e.g. event notifications) that are not associated with a transaction. Personality modules dynamically register their callbacks with the driver core to receive the callback index to use for their handlers. o Move the interrupt handler into mpt.c. The ISR algorithm is bus transport and OS independent and thus had no reason to be in mpt_pci.c. o Simplify configuration message reply handling by copying reply frame data for the requester and storing completion status in the original request structure. o Add the mpt_complete_request_chain() helper method and use it to implement reset handlers that must abort transactions. o Keep track of all pending requests on the new requests_pending_list in the softc. o Add default handlers to mpt.c to handle generic event notifications and controller reset activities. The event handler code is largely the same as in the original driver. The reset handler is new and terminates any pending transactions with a status code indicating the controller needs to be re-initialized. o Add some endian support to the driver. A complete audit is still required for this driver to have any hope of operating in a big-endian environment. o Use inttypes.h and __inline. Come closer to being style(9) compliant. o Remove extraneous use of typedefs. o Convert request state from a strict enumeration to a series of flags. This allows us to, for example, tag transactions that have timed-out while retaining the state that the transaction is still in-flight on the controller. o Add mpt_wait_req() which allows a caller to poll or sleep for the completion of a request. Use this to simplify and factor code out from many initialization routines. We also use this to sleep for task management request completions in our CAM timeout handler. mpt.c: o Correct a bug in the event handler where request structures were freed even if the request reply was marked as a continuation reply. Continuation replies indicate that the controller still owns the request and freeing these replies prematurely corrupted controller state. o Implement firmware upload and download. On controllers that do not have dedicated NVRAM (as in the Sun v20/v40z), the firmware image is downloaded to the controller by the system BIOS. This image occupies precious controller RAM space until the host driver fetches the image, reducing the number of concurrent I/Os the controller can processes. The uploaded image is used to re-program the controller during hard reset events since the controller cannot fetch the firmware on its own. Implementing this feature allows much higher queue depths when RAID volumes are configured. o Changed configuration page accessors to allow threads to sleep rather than busy wait for completion. o Removed hard coded data transfer sizes from configuration page routines so that RAID configuration page processing is possible. mpt_reg.h: o Move controller register definitions into a separate file. mpt.h: o Re-arrange includes to allow inlined functions to be defined in mpt.h. o Add reply, event, and reset handler definitions. o Add softc fields for handling timeout and controller reset recovery. mpt_cam.c: o Move mpt_freebsd.c to mpt_cam.c. Move all core functionality, such as event handling, into mpt.c leaving only CAM SCSI support here. o Revamp completion handler to provide correct CAM status for all currently defined SCSI MPI message result codes. o Register event and reset handlers with the MPT core. Modify the event handler to notify CAM of bus reset events. The controller reset handler will abort any transactions that have timed out. All other pending CAM transactions are correctly aborted by the core driver's reset handler. o Allocate a single request up front to perform task management operations. This guarantees that we can always perform a TMF operation even when the controller is saturated with other operations. The single request also serves as a perfect mechanism of guaranteeing that only a single TMF is in flight at a time - something that is required according to the MPT Fusion documentation. o Add a helper function for issuing task management requests to the controller. This is used to abort individual requests or perform a bus reset. o Modify the CAM XPT_BUS_RESET ccb handler to wait for and properly handle the status of the bus reset task management frame used to reset the bus. The previous code assumed that the reset request would always succeed. o Add timeout recovery support. When a timeout occurs, the timed-out request is added to a queue to be processed by our recovery thread and the thread is woken up. The recovery thread processes timed-out command serially, attempting first to abort them and then falling back to a bus reset if an abort fails. o Add calls to mpt_reset() to reset the controller if any handshake command, bus reset attempt or abort attempt fails due to a timeout. o Export a secondary "bus" to CAM that exposes all volume drive members as pass-thru devices, allowing CAM to perform proper speed negotiation to hidden devices. o Add a CAM async event handler tracking the AC_FOUND_DEVICE event. Use this to trigger calls to set the per-volume queue depth once the volume is fully registered with CAM. This is required to avoid hitting firmware limits on volume queue depth. Exceeding the limit causes the firmware to hang. mpt_cam.h: o Add several helper functions for interfacing to CAM and performing timeout recovery. mpt_pci.c: o Disable interrupts on the controller before registering and enabling interrupt delivery to the OS. Otherwise we risk receiving interrupts before the driver is ready to receive them. o Make use of compatibility macros that allow the driver to be compiled under 4.x and 5.x. mpt_raid.c: o Add a per-controller instance RAID thread to perform settings changes and query status (minimizes CPU busy wait loops). o Use a shutdown handler to disable "Member Write Cache Enable" (MWCE) setting for RAID arrays set to enable MWCE During Rebuild. o Change reply handler function signature to allow handlers to defer the deletion of reply frames. Use this to allow the event reply handler to queue up events that need to be acked if no resources are available to immediately ack an event. Queued events are processed in mpt_free_request() where resources are freed. This avoids a panic on resource shortage. o Parse and print out RAID controller capabilities during driver probe. o Define, allocate, and maintain RAID data structures for volumes, hidden member physical disks and spare disks. o Add dynamic sysctls for per-instance setting of the log level, array resync rate, array member cache enable, and volume queue depth. mpt_debug.c: o Add mpt_lprt and mpt_lprtc for printing diagnostics conditioned on a particular log level to aid in tracking down driver issues. o Add mpt_decode_value() which parses the bits in an integer value based on a parsing table (mask, value, name string, tuples). mpilib/*: o Update mpi library header files to latest distribution from LSI. Submitted by: gibbs Approved by: re
2005-07-10 15:05:39 +00:00
if (*cur_column >= wrap_point) {
printf("\n");
*cur_column = 0;
}
printed = printf("%s[0x%x]", name, value);
if (table == NULL) {
printed += printf(" ");
*cur_column += printed;
return (printed);
}
printed_mask = 0;
while (printed_mask != 0xFF) {
int entry;
for (entry = 0; entry < num_entries; entry++) {
if (((value & table[entry].mask)
!= table[entry].value)
|| ((printed_mask & table[entry].mask)
== table[entry].mask))
continue;
printed += printf("%s%s",
printed_mask == 0 ? ":(" : "|",
table[entry].name);
printed_mask |= table[entry].mask;
break;
}
if (entry >= num_entries)
break;
}
if (printed_mask != 0)
printed += printf(") ");
else
printed += printf(" ");
*cur_column += printed;
return (printed);
}
static mpt_decode_entry_t req_state_parse_table[] = {
{ "REQ_FREE", 0x00, 0xff },
{ "REQ_ALLOCATED", 0x01, 0x01 },
{ "REQ_QUEUED", 0x02, 0x02 },
{ "REQ_DONE", 0x04, 0x04 },
{ "REQ_TIMEDOUT", 0x08, 0x08 },
{ "REQ_NEED_WAKEUP", 0x10, 0x10 }
};
void
mpt_req_state(mpt_req_state_t state)
{
mpt_decode_value(req_state_parse_table,
NUM_ELEMENTS(req_state_parse_table),
"REQ_STATE", state, NULL, 80);
Remove erroneous semicolons.
2004-07-13 16:06:19 +00:00
}
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
Do initial cut of SAS HBA support. These controllers (106X) seem to support automatically both SATA and SAS drives. The async SAS event handling we catch but ignore at present (so automagic attach/detach isn't hooked up yet). Do 64 bit PCI support- we can now work on systems with > 4GB of memory. Do large transfer support- we now can support up to reported chain depth, or the length of our request area. We simply allocate additional request elements when we would run out of room for chain lists. Tested on Ultra320, FC and SAS controllers on AMD64 and i386 platforms. There were no RAID cards available for me to regression test. The error recovery for this driver still is pretty bad.
2006-02-11 01:35:29 +00:00
#define LAST_SGE ( \
MPI_SGE_FLAGS_END_OF_LIST | \
MPI_SGE_FLAGS_END_OF_BUFFER| \
MPI_SGE_FLAGS_LAST_ELEMENT)
void
mpt_dump_sgl(SGE_IO_UNION *su, int offset)
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
{
SGE_SIMPLE32 *se = (SGE_SIMPLE32 *) su;
Do initial cut of SAS HBA support. These controllers (106X) seem to support automatically both SATA and SAS drives. The async SAS event handling we catch but ignore at present (so automagic attach/detach isn't hooked up yet). Do 64 bit PCI support- we can now work on systems with > 4GB of memory. Do large transfer support- we now can support up to reported chain depth, or the length of our request area. We simply allocate additional request elements when we would run out of room for chain lists. Tested on Ultra320, FC and SAS controllers on AMD64 and i386 platforms. There were no RAID cards available for me to regression test. The error recovery for this driver still is pretty bad.
2006-02-11 01:35:29 +00:00
const char allfox[4] = { 0xff, 0xff, 0xff, 0xff };
void *nxtaddr = se;
void *lim;
int flags;
/*
* Can't be any bigger than this.
*/
lim = &((char *)se)[MPT_REQUEST_AREA - offset];
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
do {
int iprt;
printf("\t");
Do initial cut of SAS HBA support. These controllers (106X) seem to support automatically both SATA and SAS drives. The async SAS event handling we catch but ignore at present (so automagic attach/detach isn't hooked up yet). Do 64 bit PCI support- we can now work on systems with > 4GB of memory. Do large transfer support- we now can support up to reported chain depth, or the length of our request area. We simply allocate additional request elements when we would run out of room for chain lists. Tested on Ultra320, FC and SAS controllers on AMD64 and i386 platforms. There were no RAID cards available for me to regression test. The error recovery for this driver still is pretty bad.
2006-02-11 01:35:29 +00:00
if (memcmp(se, allfox, 4) == 0) {
uint32_t *nxt = (uint32_t *)se;
printf("PAD %p\n", se);
nxtaddr = nxt + 1;
se = nxtaddr;
flags = 0;
continue;
}
nxtaddr = se + 1;
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
flags = MPI_SGE_GET_FLAGS(se->FlagsLength);
switch (flags & MPI_SGE_FLAGS_ELEMENT_MASK) {
case MPI_SGE_FLAGS_SIMPLE_ELEMENT:
Do initial cut of SAS HBA support. These controllers (106X) seem to support automatically both SATA and SAS drives. The async SAS event handling we catch but ignore at present (so automagic attach/detach isn't hooked up yet). Do 64 bit PCI support- we can now work on systems with > 4GB of memory. Do large transfer support- we now can support up to reported chain depth, or the length of our request area. We simply allocate additional request elements when we would run out of room for chain lists. Tested on Ultra320, FC and SAS controllers on AMD64 and i386 platforms. There were no RAID cards available for me to regression test. The error recovery for this driver still is pretty bad.
2006-02-11 01:35:29 +00:00
if (flags & MPI_SGE_FLAGS_64_BIT_ADDRESSING) {
SGE_SIMPLE64 *se64 = (SGE_SIMPLE64 *)se;
Remove the ill-considered effect of using the type definitions as distributed by LSI-Logic. For FreeBSD, just use the posix defines instead of trying to figure out how wide an int is. Apologies to all.
2006-02-26 22:50:14 +00:00
printf("SE64 %p: Addr=0x%08x%08x FlagsLength"
"=0x%0x\n", se64, se64->Address.High,
Do initial cut of SAS HBA support. These controllers (106X) seem to support automatically both SATA and SAS drives. The async SAS event handling we catch but ignore at present (so automagic attach/detach isn't hooked up yet). Do 64 bit PCI support- we can now work on systems with > 4GB of memory. Do large transfer support- we now can support up to reported chain depth, or the length of our request area. We simply allocate additional request elements when we would run out of room for chain lists. Tested on Ultra320, FC and SAS controllers on AMD64 and i386 platforms. There were no RAID cards available for me to regression test. The error recovery for this driver still is pretty bad.
2006-02-11 01:35:29 +00:00
se64->Address.Low, se64->FlagsLength);
nxtaddr = se64 + 1;
} else {
Remove the ill-considered effect of using the type definitions as distributed by LSI-Logic. For FreeBSD, just use the posix defines instead of trying to figure out how wide an int is. Apologies to all.
2006-02-26 22:50:14 +00:00
printf("SE32 %p: Addr=0x%0x FlagsLength=0x%0x"
Do initial cut of SAS HBA support. These controllers (106X) seem to support automatically both SATA and SAS drives. The async SAS event handling we catch but ignore at present (so automagic attach/detach isn't hooked up yet). Do 64 bit PCI support- we can now work on systems with > 4GB of memory. Do large transfer support- we now can support up to reported chain depth, or the length of our request area. We simply allocate additional request elements when we would run out of room for chain lists. Tested on Ultra320, FC and SAS controllers on AMD64 and i386 platforms. There were no RAID cards available for me to regression test. The error recovery for this driver still is pretty bad.
2006-02-11 01:35:29 +00:00
"\n", se, se->Address, se->FlagsLength);
}
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
printf(" ");
break;
case MPI_SGE_FLAGS_CHAIN_ELEMENT:
Do initial cut of SAS HBA support. These controllers (106X) seem to support automatically both SATA and SAS drives. The async SAS event handling we catch but ignore at present (so automagic attach/detach isn't hooked up yet). Do 64 bit PCI support- we can now work on systems with > 4GB of memory. Do large transfer support- we now can support up to reported chain depth, or the length of our request area. We simply allocate additional request elements when we would run out of room for chain lists. Tested on Ultra320, FC and SAS controllers on AMD64 and i386 platforms. There were no RAID cards available for me to regression test. The error recovery for this driver still is pretty bad.
2006-02-11 01:35:29 +00:00
if (flags & MPI_SGE_FLAGS_64_BIT_ADDRESSING) {
SGE_CHAIN64 *ce64 = (SGE_CHAIN64 *) se;
Remove the ill-considered effect of using the type definitions as distributed by LSI-Logic. For FreeBSD, just use the posix defines instead of trying to figure out how wide an int is. Apologies to all.
2006-02-26 22:50:14 +00:00
printf("CE64 %p: Addr=0x%08x%08x NxtChnO=0x%x "
"Flgs=0x%x Len=0x%0x\n", ce64,
Do initial cut of SAS HBA support. These controllers (106X) seem to support automatically both SATA and SAS drives. The async SAS event handling we catch but ignore at present (so automagic attach/detach isn't hooked up yet). Do 64 bit PCI support- we can now work on systems with > 4GB of memory. Do large transfer support- we now can support up to reported chain depth, or the length of our request area. We simply allocate additional request elements when we would run out of room for chain lists. Tested on Ultra320, FC and SAS controllers on AMD64 and i386 platforms. There were no RAID cards available for me to regression test. The error recovery for this driver still is pretty bad.
2006-02-11 01:35:29 +00:00
ce64->Address.High, ce64->Address.Low,
ce64->NextChainOffset,
ce64->Flags, ce64->Length);
nxtaddr = ce64 + 1;
} else {
SGE_CHAIN32 *ce = (SGE_CHAIN32 *) se;
Remove the ill-considered effect of using the type definitions as distributed by LSI-Logic. For FreeBSD, just use the posix defines instead of trying to figure out how wide an int is. Apologies to all.
2006-02-26 22:50:14 +00:00
printf("CE32 %p: Addr=0x%0x NxtChnO=0x%x "
" Flgs=0x%x Len=0x%0x\n", ce, ce->Address,
Do initial cut of SAS HBA support. These controllers (106X) seem to support automatically both SATA and SAS drives. The async SAS event handling we catch but ignore at present (so automagic attach/detach isn't hooked up yet). Do 64 bit PCI support- we can now work on systems with > 4GB of memory. Do large transfer support- we now can support up to reported chain depth, or the length of our request area. We simply allocate additional request elements when we would run out of room for chain lists. Tested on Ultra320, FC and SAS controllers on AMD64 and i386 platforms. There were no RAID cards available for me to regression test. The error recovery for this driver still is pretty bad.
2006-02-11 01:35:29 +00:00
ce->NextChainOffset, ce->Flags, ce->Length);
}
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
flags = 0;
break;
case MPI_SGE_FLAGS_TRANSACTION_ELEMENT:
printf("TE32 @ %p\n", se);
flags = 0;
break;
}
iprt = 0;
#define MPT_PRINT_FLAG(x) \
if (flags & MPI_SGE_FLAGS_ ## x ) { \
if (iprt == 0) { \
printf("\t"); \
} \
printf(" "); \
printf( #x ); \
iprt++; \
}
MPT_PRINT_FLAG(LOCAL_ADDRESS);
MPT_PRINT_FLAG(HOST_TO_IOC);
MPT_PRINT_FLAG(64_BIT_ADDRESSING);
MPT_PRINT_FLAG(LAST_ELEMENT);
MPT_PRINT_FLAG(END_OF_BUFFER);
MPT_PRINT_FLAG(END_OF_LIST);
#undef MPT_PRINT_FLAG
if (iprt)
printf("\n");
Do initial cut of SAS HBA support. These controllers (106X) seem to support automatically both SATA and SAS drives. The async SAS event handling we catch but ignore at present (so automagic attach/detach isn't hooked up yet). Do 64 bit PCI support- we can now work on systems with > 4GB of memory. Do large transfer support- we now can support up to reported chain depth, or the length of our request area. We simply allocate additional request elements when we would run out of room for chain lists. Tested on Ultra320, FC and SAS controllers on AMD64 and i386 platforms. There were no RAID cards available for me to regression test. The error recovery for this driver still is pretty bad.
2006-02-11 01:35:29 +00:00
se = nxtaddr;
if ((flags & LAST_SGE) == LAST_SGE) {
break;
}
} while ((flags & MPI_SGE_FLAGS_END_OF_LIST) == 0 && nxtaddr < lim);
Add support for the LSI-Logic Fusion/MP architecture. This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
2002-08-11 23:34:20 +00:00
}
Code cleanup: use mpt_prt instead of device_printf.
2002-09-24 21:33:43 +00:00
void
Massive overhaul of MPT Fusion driver: o Add timeout error recovery (from a thread context to avoid the deferral of other critical interrupts). o Properly recover commands across controller reset events. o Update the driver to handle events and status codes that have been added to the MPI spec since the driver was originally written. o Make the driver more modular to improve maintainability and support dynamic "personality" registration (e.g. SCSI Initiator, RAID, SAS, FC, etc). o Shorten and simplify the common I/O path to improve driver performance. o Add RAID volume and RAID member state/settings reporting. o Add periodic volume resynchronization status reporting. o Add support for sysctl tunable resync rate, member write cache enable, and volume transaction queue depth. Sponsored by ---------------- Avid Technologies Inc: SCSI error recovery, driver re-organization, update of MPI library headers, portions of dynamic personality registration, and misc bug fixes. Wheel Open Technologies: RAID event notification, RAID member pass-thru support, firmware upload/download support, enhanced RAID resync speed, portions of dynamic personality registration, and misc bug fixes. Detailed Changes ================ mpt.c mpt_cam.c mpt_raid.c mpt_pci.c: o Add support for personality modules. Each module exports load, and unload module scope methods as well as probe, attach, event, reset, shutdown, and detach per-device instance methods mpt.c mpt.h mpt_pci.c: o The driver now associates a callback function (via an index) with every transaction submitted to the controller. This allows the main interrupt handler to absolve itself of any knowledge of individual transaction/response types by simply calling the callback function "registered" for the transaction. We use a callback index instead of a callback function pointer in each requests so we can properly handle responses (e.g. event notifications) that are not associated with a transaction. Personality modules dynamically register their callbacks with the driver core to receive the callback index to use for their handlers. o Move the interrupt handler into mpt.c. The ISR algorithm is bus transport and OS independent and thus had no reason to be in mpt_pci.c. o Simplify configuration message reply handling by copying reply frame data for the requester and storing completion status in the original request structure. o Add the mpt_complete_request_chain() helper method and use it to implement reset handlers that must abort transactions. o Keep track of all pending requests on the new requests_pending_list in the softc. o Add default handlers to mpt.c to handle generic event notifications and controller reset activities. The event handler code is largely the same as in the original driver. The reset handler is new and terminates any pending transactions with a status code indicating the controller needs to be re-initialized. o Add some endian support to the driver. A complete audit is still required for this driver to have any hope of operating in a big-endian environment. o Use inttypes.h and __inline. Come closer to being style(9) compliant. o Remove extraneous use of typedefs. o Convert request state from a strict enumeration to a series of flags. This allows us to, for example, tag transactions that have timed-out while retaining the state that the transaction is still in-flight on the controller. o Add mpt_wait_req() which allows a caller to poll or sleep for the completion of a request. Use this to simplify and factor code out from many initialization routines. We also use this to sleep for task management request completions in our CAM timeout handler. mpt.c: o Correct a bug in the event handler where request structures were freed even if the request reply was marked as a continuation reply. Continuation replies indicate that the controller still owns the request and freeing these replies prematurely corrupted controller state. o Implement firmware upload and download. On controllers that do not have dedicated NVRAM (as in the Sun v20/v40z), the firmware image is downloaded to the controller by the system BIOS. This image occupies precious controller RAM space until the host driver fetches the image, reducing the number of concurrent I/Os the controller can processes. The uploaded image is used to re-program the controller during hard reset events since the controller cannot fetch the firmware on its own. Implementing this feature allows much higher queue depths when RAID volumes are configured. o Changed configuration page accessors to allow threads to sleep rather than busy wait for completion. o Removed hard coded data transfer sizes from configuration page routines so that RAID configuration page processing is possible. mpt_reg.h: o Move controller register definitions into a separate file. mpt.h: o Re-arrange includes to allow inlined functions to be defined in mpt.h. o Add reply, event, and reset handler definitions. o Add softc fields for handling timeout and controller reset recovery. mpt_cam.c: o Move mpt_freebsd.c to mpt_cam.c. Move all core functionality, such as event handling, into mpt.c leaving only CAM SCSI support here. o Revamp completion handler to provide correct CAM status for all currently defined SCSI MPI message result codes. o Register event and reset handlers with the MPT core. Modify the event handler to notify CAM of bus reset events. The controller reset handler will abort any transactions that have timed out. All other pending CAM transactions are correctly aborted by the core driver's reset handler. o Allocate a single request up front to perform task management operations. This guarantees that we can always perform a TMF operation even when the controller is saturated with other operations. The single request also serves as a perfect mechanism of guaranteeing that only a single TMF is in flight at a time - something that is required according to the MPT Fusion documentation. o Add a helper function for issuing task management requests to the controller. This is used to abort individual requests or perform a bus reset. o Modify the CAM XPT_BUS_RESET ccb handler to wait for and properly handle the status of the bus reset task management frame used to reset the bus. The previous code assumed that the reset request would always succeed. o Add timeout recovery support. When a timeout occurs, the timed-out request is added to a queue to be processed by our recovery thread and the thread is woken up. The recovery thread processes timed-out command serially, attempting first to abort them and then falling back to a bus reset if an abort fails. o Add calls to mpt_reset() to reset the controller if any handshake command, bus reset attempt or abort attempt fails due to a timeout. o Export a secondary "bus" to CAM that exposes all volume drive members as pass-thru devices, allowing CAM to perform proper speed negotiation to hidden devices. o Add a CAM async event handler tracking the AC_FOUND_DEVICE event. Use this to trigger calls to set the per-volume queue depth once the volume is fully registered with CAM. This is required to avoid hitting firmware limits on volume queue depth. Exceeding the limit causes the firmware to hang. mpt_cam.h: o Add several helper functions for interfacing to CAM and performing timeout recovery. mpt_pci.c: o Disable interrupts on the controller before registering and enabling interrupt delivery to the OS. Otherwise we risk receiving interrupts before the driver is ready to receive them. o Make use of compatibility macros that allow the driver to be compiled under 4.x and 5.x. mpt_raid.c: o Add a per-controller instance RAID thread to perform settings changes and query status (minimizes CPU busy wait loops). o Use a shutdown handler to disable "Member Write Cache Enable" (MWCE) setting for RAID arrays set to enable MWCE During Rebuild. o Change reply handler function signature to allow handlers to defer the deletion of reply frames. Use this to allow the event reply handler to queue up events that need to be acked if no resources are available to immediately ack an event. Queued events are processed in mpt_free_request() where resources are freed. This avoids a panic on resource shortage. o Parse and print out RAID controller capabilities during driver probe. o Define, allocate, and maintain RAID data structures for volumes, hidden member physical disks and spare disks. o Add dynamic sysctls for per-instance setting of the log level, array resync rate, array member cache enable, and volume queue depth. mpt_debug.c: o Add mpt_lprt and mpt_lprtc for printing diagnostics conditioned on a particular log level to aid in tracking down driver issues. o Add mpt_decode_value() which parses the bits in an integer value based on a parsing table (mask, value, name string, tuples). mpilib/*: o Update mpi library header files to latest distribution from LSI. Submitted by: gibbs Approved by: re
2005-07-10 15:05:39 +00:00
mpt_prt(struct mpt_softc *mpt, const char *fmt, ...)
Code cleanup: use mpt_prt instead of device_printf.
2002-09-24 21:33:43 +00:00
{
va_list ap;
Massive overhaul of MPT Fusion driver: o Add timeout error recovery (from a thread context to avoid the deferral of other critical interrupts). o Properly recover commands across controller reset events. o Update the driver to handle events and status codes that have been added to the MPI spec since the driver was originally written. o Make the driver more modular to improve maintainability and support dynamic "personality" registration (e.g. SCSI Initiator, RAID, SAS, FC, etc). o Shorten and simplify the common I/O path to improve driver performance. o Add RAID volume and RAID member state/settings reporting. o Add periodic volume resynchronization status reporting. o Add support for sysctl tunable resync rate, member write cache enable, and volume transaction queue depth. Sponsored by ---------------- Avid Technologies Inc: SCSI error recovery, driver re-organization, update of MPI library headers, portions of dynamic personality registration, and misc bug fixes. Wheel Open Technologies: RAID event notification, RAID member pass-thru support, firmware upload/download support, enhanced RAID resync speed, portions of dynamic personality registration, and misc bug fixes. Detailed Changes ================ mpt.c mpt_cam.c mpt_raid.c mpt_pci.c: o Add support for personality modules. Each module exports load, and unload module scope methods as well as probe, attach, event, reset, shutdown, and detach per-device instance methods mpt.c mpt.h mpt_pci.c: o The driver now associates a callback function (via an index) with every transaction submitted to the controller. This allows the main interrupt handler to absolve itself of any knowledge of individual transaction/response types by simply calling the callback function "registered" for the transaction. We use a callback index instead of a callback function pointer in each requests so we can properly handle responses (e.g. event notifications) that are not associated with a transaction. Personality modules dynamically register their callbacks with the driver core to receive the callback index to use for their handlers. o Move the interrupt handler into mpt.c. The ISR algorithm is bus transport and OS independent and thus had no reason to be in mpt_pci.c. o Simplify configuration message reply handling by copying reply frame data for the requester and storing completion status in the original request structure. o Add the mpt_complete_request_chain() helper method and use it to implement reset handlers that must abort transactions. o Keep track of all pending requests on the new requests_pending_list in the softc. o Add default handlers to mpt.c to handle generic event notifications and controller reset activities. The event handler code is largely the same as in the original driver. The reset handler is new and terminates any pending transactions with a status code indicating the controller needs to be re-initialized. o Add some endian support to the driver. A complete audit is still required for this driver to have any hope of operating in a big-endian environment. o Use inttypes.h and __inline. Come closer to being style(9) compliant. o Remove extraneous use of typedefs. o Convert request state from a strict enumeration to a series of flags. This allows us to, for example, tag transactions that have timed-out while retaining the state that the transaction is still in-flight on the controller. o Add mpt_wait_req() which allows a caller to poll or sleep for the completion of a request. Use this to simplify and factor code out from many initialization routines. We also use this to sleep for task management request completions in our CAM timeout handler. mpt.c: o Correct a bug in the event handler where request structures were freed even if the request reply was marked as a continuation reply. Continuation replies indicate that the controller still owns the request and freeing these replies prematurely corrupted controller state. o Implement firmware upload and download. On controllers that do not have dedicated NVRAM (as in the Sun v20/v40z), the firmware image is downloaded to the controller by the system BIOS. This image occupies precious controller RAM space until the host driver fetches the image, reducing the number of concurrent I/Os the controller can processes. The uploaded image is used to re-program the controller during hard reset events since the controller cannot fetch the firmware on its own. Implementing this feature allows much higher queue depths when RAID volumes are configured. o Changed configuration page accessors to allow threads to sleep rather than busy wait for completion. o Removed hard coded data transfer sizes from configuration page routines so that RAID configuration page processing is possible. mpt_reg.h: o Move controller register definitions into a separate file. mpt.h: o Re-arrange includes to allow inlined functions to be defined in mpt.h. o Add reply, event, and reset handler definitions. o Add softc fields for handling timeout and controller reset recovery. mpt_cam.c: o Move mpt_freebsd.c to mpt_cam.c. Move all core functionality, such as event handling, into mpt.c leaving only CAM SCSI support here. o Revamp completion handler to provide correct CAM status for all currently defined SCSI MPI message result codes. o Register event and reset handlers with the MPT core. Modify the event handler to notify CAM of bus reset events. The controller reset handler will abort any transactions that have timed out. All other pending CAM transactions are correctly aborted by the core driver's reset handler. o Allocate a single request up front to perform task management operations. This guarantees that we can always perform a TMF operation even when the controller is saturated with other operations. The single request also serves as a perfect mechanism of guaranteeing that only a single TMF is in flight at a time - something that is required according to the MPT Fusion documentation. o Add a helper function for issuing task management requests to the controller. This is used to abort individual requests or perform a bus reset. o Modify the CAM XPT_BUS_RESET ccb handler to wait for and properly handle the status of the bus reset task management frame used to reset the bus. The previous code assumed that the reset request would always succeed. o Add timeout recovery support. When a timeout occurs, the timed-out request is added to a queue to be processed by our recovery thread and the thread is woken up. The recovery thread processes timed-out command serially, attempting first to abort them and then falling back to a bus reset if an abort fails. o Add calls to mpt_reset() to reset the controller if any handshake command, bus reset attempt or abort attempt fails due to a timeout. o Export a secondary "bus" to CAM that exposes all volume drive members as pass-thru devices, allowing CAM to perform proper speed negotiation to hidden devices. o Add a CAM async event handler tracking the AC_FOUND_DEVICE event. Use this to trigger calls to set the per-volume queue depth once the volume is fully registered with CAM. This is required to avoid hitting firmware limits on volume queue depth. Exceeding the limit causes the firmware to hang. mpt_cam.h: o Add several helper functions for interfacing to CAM and performing timeout recovery. mpt_pci.c: o Disable interrupts on the controller before registering and enabling interrupt delivery to the OS. Otherwise we risk receiving interrupts before the driver is ready to receive them. o Make use of compatibility macros that allow the driver to be compiled under 4.x and 5.x. mpt_raid.c: o Add a per-controller instance RAID thread to perform settings changes and query status (minimizes CPU busy wait loops). o Use a shutdown handler to disable "Member Write Cache Enable" (MWCE) setting for RAID arrays set to enable MWCE During Rebuild. o Change reply handler function signature to allow handlers to defer the deletion of reply frames. Use this to allow the event reply handler to queue up events that need to be acked if no resources are available to immediately ack an event. Queued events are processed in mpt_free_request() where resources are freed. This avoids a panic on resource shortage. o Parse and print out RAID controller capabilities during driver probe. o Define, allocate, and maintain RAID data structures for volumes, hidden member physical disks and spare disks. o Add dynamic sysctls for per-instance setting of the log level, array resync rate, array member cache enable, and volume queue depth. mpt_debug.c: o Add mpt_lprt and mpt_lprtc for printing diagnostics conditioned on a particular log level to aid in tracking down driver issues. o Add mpt_decode_value() which parses the bits in an integer value based on a parsing table (mask, value, name string, tuples). mpilib/*: o Update mpi library header files to latest distribution from LSI. Submitted by: gibbs Approved by: re
2005-07-10 15:05:39 +00:00
Code cleanup: use mpt_prt instead of device_printf.
2002-09-24 21:33:43 +00:00
printf("%s: ", device_get_nameunit(mpt->dev));
va_start(ap, fmt);
vprintf(fmt, ap);
va_end(ap);
Massive overhaul of MPT Fusion driver: o Add timeout error recovery (from a thread context to avoid the deferral of other critical interrupts). o Properly recover commands across controller reset events. o Update the driver to handle events and status codes that have been added to the MPI spec since the driver was originally written. o Make the driver more modular to improve maintainability and support dynamic "personality" registration (e.g. SCSI Initiator, RAID, SAS, FC, etc). o Shorten and simplify the common I/O path to improve driver performance. o Add RAID volume and RAID member state/settings reporting. o Add periodic volume resynchronization status reporting. o Add support for sysctl tunable resync rate, member write cache enable, and volume transaction queue depth. Sponsored by ---------------- Avid Technologies Inc: SCSI error recovery, driver re-organization, update of MPI library headers, portions of dynamic personality registration, and misc bug fixes. Wheel Open Technologies: RAID event notification, RAID member pass-thru support, firmware upload/download support, enhanced RAID resync speed, portions of dynamic personality registration, and misc bug fixes. Detailed Changes ================ mpt.c mpt_cam.c mpt_raid.c mpt_pci.c: o Add support for personality modules. Each module exports load, and unload module scope methods as well as probe, attach, event, reset, shutdown, and detach per-device instance methods mpt.c mpt.h mpt_pci.c: o The driver now associates a callback function (via an index) with every transaction submitted to the controller. This allows the main interrupt handler to absolve itself of any knowledge of individual transaction/response types by simply calling the callback function "registered" for the transaction. We use a callback index instead of a callback function pointer in each requests so we can properly handle responses (e.g. event notifications) that are not associated with a transaction. Personality modules dynamically register their callbacks with the driver core to receive the callback index to use for their handlers. o Move the interrupt handler into mpt.c. The ISR algorithm is bus transport and OS independent and thus had no reason to be in mpt_pci.c. o Simplify configuration message reply handling by copying reply frame data for the requester and storing completion status in the original request structure. o Add the mpt_complete_request_chain() helper method and use it to implement reset handlers that must abort transactions. o Keep track of all pending requests on the new requests_pending_list in the softc. o Add default handlers to mpt.c to handle generic event notifications and controller reset activities. The event handler code is largely the same as in the original driver. The reset handler is new and terminates any pending transactions with a status code indicating the controller needs to be re-initialized. o Add some endian support to the driver. A complete audit is still required for this driver to have any hope of operating in a big-endian environment. o Use inttypes.h and __inline. Come closer to being style(9) compliant. o Remove extraneous use of typedefs. o Convert request state from a strict enumeration to a series of flags. This allows us to, for example, tag transactions that have timed-out while retaining the state that the transaction is still in-flight on the controller. o Add mpt_wait_req() which allows a caller to poll or sleep for the completion of a request. Use this to simplify and factor code out from many initialization routines. We also use this to sleep for task management request completions in our CAM timeout handler. mpt.c: o Correct a bug in the event handler where request structures were freed even if the request reply was marked as a continuation reply. Continuation replies indicate that the controller still owns the request and freeing these replies prematurely corrupted controller state. o Implement firmware upload and download. On controllers that do not have dedicated NVRAM (as in the Sun v20/v40z), the firmware image is downloaded to the controller by the system BIOS. This image occupies precious controller RAM space until the host driver fetches the image, reducing the number of concurrent I/Os the controller can processes. The uploaded image is used to re-program the controller during hard reset events since the controller cannot fetch the firmware on its own. Implementing this feature allows much higher queue depths when RAID volumes are configured. o Changed configuration page accessors to allow threads to sleep rather than busy wait for completion. o Removed hard coded data transfer sizes from configuration page routines so that RAID configuration page processing is possible. mpt_reg.h: o Move controller register definitions into a separate file. mpt.h: o Re-arrange includes to allow inlined functions to be defined in mpt.h. o Add reply, event, and reset handler definitions. o Add softc fields for handling timeout and controller reset recovery. mpt_cam.c: o Move mpt_freebsd.c to mpt_cam.c. Move all core functionality, such as event handling, into mpt.c leaving only CAM SCSI support here. o Revamp completion handler to provide correct CAM status for all currently defined SCSI MPI message result codes. o Register event and reset handlers with the MPT core. Modify the event handler to notify CAM of bus reset events. The controller reset handler will abort any transactions that have timed out. All other pending CAM transactions are correctly aborted by the core driver's reset handler. o Allocate a single request up front to perform task management operations. This guarantees that we can always perform a TMF operation even when the controller is saturated with other operations. The single request also serves as a perfect mechanism of guaranteeing that only a single TMF is in flight at a time - something that is required according to the MPT Fusion documentation. o Add a helper function for issuing task management requests to the controller. This is used to abort individual requests or perform a bus reset. o Modify the CAM XPT_BUS_RESET ccb handler to wait for and properly handle the status of the bus reset task management frame used to reset the bus. The previous code assumed that the reset request would always succeed. o Add timeout recovery support. When a timeout occurs, the timed-out request is added to a queue to be processed by our recovery thread and the thread is woken up. The recovery thread processes timed-out command serially, attempting first to abort them and then falling back to a bus reset if an abort fails. o Add calls to mpt_reset() to reset the controller if any handshake command, bus reset attempt or abort attempt fails due to a timeout. o Export a secondary "bus" to CAM that exposes all volume drive members as pass-thru devices, allowing CAM to perform proper speed negotiation to hidden devices. o Add a CAM async event handler tracking the AC_FOUND_DEVICE event. Use this to trigger calls to set the per-volume queue depth once the volume is fully registered with CAM. This is required to avoid hitting firmware limits on volume queue depth. Exceeding the limit causes the firmware to hang. mpt_cam.h: o Add several helper functions for interfacing to CAM and performing timeout recovery. mpt_pci.c: o Disable interrupts on the controller before registering and enabling interrupt delivery to the OS. Otherwise we risk receiving interrupts before the driver is ready to receive them. o Make use of compatibility macros that allow the driver to be compiled under 4.x and 5.x. mpt_raid.c: o Add a per-controller instance RAID thread to perform settings changes and query status (minimizes CPU busy wait loops). o Use a shutdown handler to disable "Member Write Cache Enable" (MWCE) setting for RAID arrays set to enable MWCE During Rebuild. o Change reply handler function signature to allow handlers to defer the deletion of reply frames. Use this to allow the event reply handler to queue up events that need to be acked if no resources are available to immediately ack an event. Queued events are processed in mpt_free_request() where resources are freed. This avoids a panic on resource shortage. o Parse and print out RAID controller capabilities during driver probe. o Define, allocate, and maintain RAID data structures for volumes, hidden member physical disks and spare disks. o Add dynamic sysctls for per-instance setting of the log level, array resync rate, array member cache enable, and volume queue depth. mpt_debug.c: o Add mpt_lprt and mpt_lprtc for printing diagnostics conditioned on a particular log level to aid in tracking down driver issues. o Add mpt_decode_value() which parses the bits in an integer value based on a parsing table (mask, value, name string, tuples). mpilib/*: o Update mpi library header files to latest distribution from LSI. Submitted by: gibbs Approved by: re
2005-07-10 15:05:39 +00:00
}
void
mpt_prtc(struct mpt_softc *mpt, const char *fmt, ...)
{
va_list ap;
va_start(ap, fmt);
vprintf(fmt, ap);
va_end(ap);
Code cleanup: use mpt_prt instead of device_printf.
2002-09-24 21:33:43 +00:00
}
Reference in New Issue Copy Permalink