freebsd-dev/sys/cam/scsi/scsi_ch.c

1711 lines
44 KiB
C
Raw Normal View History

/*
* Copyright (c) 1997 Justin T. Gibbs.
* Copyright (c) 1997, 1998, 1999 Kenneth D. Merry.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
1999-08-28 01:08:13 +00:00
* $FreeBSD$
*/
/*
* Derived from the NetBSD SCSI changer driver.
*
* $NetBSD: ch.c,v 1.32 1998/01/12 09:49:12 thorpej Exp $
*
*/
/*
* Copyright (c) 1996, 1997 Jason R. Thorpe <thorpej@and.com>
* All rights reserved.
*
* Partially based on an autochanger driver written by Stefan Grefen
* and on an autochanger driver written by the Systems Programming Group
* at the University of Utah Computer Science Department.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgements:
* This product includes software developed by Jason R. Thorpe
* for And Communications, http://www.and.com/
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/param.h>
#include <sys/queue.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/types.h>
#include <sys/malloc.h>
#include <sys/fcntl.h>
#include <sys/conf.h>
#include <sys/chio.h>
#include <sys/errno.h>
#include <sys/devicestat.h>
#include <cam/cam.h>
#include <cam/cam_ccb.h>
#include <cam/cam_extend.h>
#include <cam/cam_periph.h>
#include <cam/cam_xpt_periph.h>
#include <cam/cam_debug.h>
#include <cam/scsi/scsi_all.h>
#include <cam/scsi/scsi_message.h>
#include <cam/scsi/scsi_ch.h>
/*
* Timeout definitions for various changer related commands. They may
* be too short for some devices (especially the timeout for INITIALIZE
* ELEMENT STATUS).
*/
1998-12-22 20:05:23 +00:00
static const u_int32_t CH_TIMEOUT_MODE_SENSE = 6000;
static const u_int32_t CH_TIMEOUT_MOVE_MEDIUM = 100000;
static const u_int32_t CH_TIMEOUT_EXCHANGE_MEDIUM = 100000;
static const u_int32_t CH_TIMEOUT_POSITION_TO_ELEMENT = 100000;
static const u_int32_t CH_TIMEOUT_READ_ELEMENT_STATUS = 10000;
static const u_int32_t CH_TIMEOUT_SEND_VOLTAG = 10000;
static const u_int32_t CH_TIMEOUT_INITIALIZE_ELEMENT_STATUS = 500000;
typedef enum {
CH_FLAG_INVALID = 0x001,
CH_FLAG_OPEN = 0x002
} ch_flags;
typedef enum {
CH_STATE_PROBE,
CH_STATE_NORMAL
} ch_state;
typedef enum {
CH_CCB_PROBE,
CH_CCB_WAITING
} ch_ccb_types;
typedef enum {
CH_Q_NONE = 0x00,
CH_Q_NO_DBD = 0x01
} ch_quirks;
#define ccb_state ppriv_field0
#define ccb_bp ppriv_ptr1
struct scsi_mode_sense_data {
struct scsi_mode_header_6 header;
struct scsi_mode_blk_desc blk_desc;
union {
struct page_element_address_assignment ea;
struct page_transport_geometry_parameters tg;
struct page_device_capabilities cap;
} pages;
};
struct ch_softc {
ch_flags flags;
ch_state state;
ch_quirks quirks;
union ccb saved_ccb;
struct devstat device_stats;
dev_t dev;
int sc_picker; /* current picker */
/*
* The following information is obtained from the
* element address assignment page.
*/
int sc_firsts[4]; /* firsts, indexed by CHET_* */
int sc_counts[4]; /* counts, indexed by CHET_* */
/*
* The following mask defines the legal combinations
* of elements for the MOVE MEDIUM command.
*/
u_int8_t sc_movemask[4];
/*
* As above, but for EXCHANGE MEDIUM.
*/
u_int8_t sc_exchangemask[4];
/*
* Quirks; see below. XXX KDM not implemented yet
*/
int sc_settledelay; /* delay for settle */
};
#define CHUNIT(x) (minor((x)))
#define CH_CDEV_MAJOR 17
static d_open_t chopen;
static d_close_t chclose;
static d_ioctl_t chioctl;
static periph_init_t chinit;
static periph_ctor_t chregister;
Fix a problem with the way we handled device invalidation when attaching to a device failed. In theory, the same steps that happen when we get an AC_LOST_DEVICE async notification should have been taken when a driver fails to attach. In practice, that wasn't the case. This only affected the da, cd and ch drivers, but the fix affects all peripheral drivers. There were several possible problems: - In the da driver, we didn't remove the peripheral's softc from the da driver's linked list of softcs. Once the peripheral and softc got removed, we'd get a kernel panic the next time the timeout routine called dasendorderedtag(). - In the da, cd and possibly ch drivers, we didn't remove the peripheral's devstat structure from the devstat queue. Once the peripheral and softc were removed, this could cause a panic if anyone tried to access device statistics. (one component of the linked list wouldn't exist anymore) - In the cd driver, we didn't take the peripheral off the changer run queue if it was scheduled to run. In practice, it's highly unlikely, and maybe impossible that the peripheral would have been on the changer run queue at that stage of the probe process. The fix is: - Add a new peripheral callback function (the "oninvalidate" function) that is called the first time cam_periph_invalidate() is called for a peripheral. - Create new foooninvalidate() routines for each peripheral driver. This routine is always called at splsoftcam(), and contains all the stuff that used to be in the AC_LOST_DEVICE case of the async callback handler. - Move the devstat cleanup call to the destructor/cleanup routines, since some of the drivers do I/O in their close routines. - Make sure that when we're flushing the buffer queue, we traverse it at splbio(). - Add a check for the invalid flag in the pt driver's open routine. Reviewed by: gibbs
1998-10-22 22:16:56 +00:00
static periph_oninv_t choninvalidate;
static periph_dtor_t chcleanup;
static periph_start_t chstart;
static void chasync(void *callback_arg, u_int32_t code,
struct cam_path *path, void *arg);
static void chdone(struct cam_periph *periph,
union ccb *done_ccb);
static int cherror(union ccb *ccb, u_int32_t cam_flags,
u_int32_t sense_flags);
static int chmove(struct cam_periph *periph,
struct changer_move *cm);
static int chexchange(struct cam_periph *periph,
struct changer_exchange *ce);
static int chposition(struct cam_periph *periph,
struct changer_position *cp);
static int chgetelemstatus(struct cam_periph *periph,
struct changer_element_status_request *csr);
static int chsetvoltag(struct cam_periph *periph,
struct changer_set_voltag_request *csvr);
static int chielem(struct cam_periph *periph,
unsigned int timeout);
static int chgetparams(struct cam_periph *periph);
static struct periph_driver chdriver =
{
chinit, "ch",
TAILQ_HEAD_INITIALIZER(chdriver.units), /* generation */ 0
};
PERIPHDRIVER_DECLARE(ch, chdriver);
static struct cdevsw ch_cdevsw = {
/* open */ chopen,
/* close */ chclose,
/* read */ noread,
/* write */ nowrite,
/* ioctl */ chioctl,
/* poll */ nopoll,
/* mmap */ nommap,
/* strategy */ nostrategy,
/* name */ "ch",
/* maj */ CH_CDEV_MAJOR,
/* dump */ nodump,
/* psize */ nopsize,
/* flags */ 0,
};
static struct extend_array *chperiphs;
void
chinit(void)
{
cam_status status;
struct cam_path *path;
/*
* Create our extend array for storing the devices we attach to.
*/
chperiphs = cam_extend_new();
if (chperiphs == NULL) {
printf("ch: Failed to alloc extend array!\n");
return;
}
/*
* Install a global async callback. This callback will
* receive async callbacks like "new device found".
*/
status = xpt_create_path(&path, /*periph*/NULL, CAM_XPT_PATH_ID,
CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
if (status == CAM_REQ_CMP) {
struct ccb_setasync csa;
xpt_setup_ccb(&csa.ccb_h, path, /*priority*/5);
csa.ccb_h.func_code = XPT_SASYNC_CB;
csa.event_enable = AC_FOUND_DEVICE;
csa.callback = chasync;
csa.callback_arg = NULL;
xpt_action((union ccb *)&csa);
status = csa.ccb_h.status;
xpt_free_path(path);
}
if (status != CAM_REQ_CMP) {
printf("ch: Failed to attach master async callback "
"due to status 0x%x!\n", status);
}
}
Fix a problem with the way we handled device invalidation when attaching to a device failed. In theory, the same steps that happen when we get an AC_LOST_DEVICE async notification should have been taken when a driver fails to attach. In practice, that wasn't the case. This only affected the da, cd and ch drivers, but the fix affects all peripheral drivers. There were several possible problems: - In the da driver, we didn't remove the peripheral's softc from the da driver's linked list of softcs. Once the peripheral and softc got removed, we'd get a kernel panic the next time the timeout routine called dasendorderedtag(). - In the da, cd and possibly ch drivers, we didn't remove the peripheral's devstat structure from the devstat queue. Once the peripheral and softc were removed, this could cause a panic if anyone tried to access device statistics. (one component of the linked list wouldn't exist anymore) - In the cd driver, we didn't take the peripheral off the changer run queue if it was scheduled to run. In practice, it's highly unlikely, and maybe impossible that the peripheral would have been on the changer run queue at that stage of the probe process. The fix is: - Add a new peripheral callback function (the "oninvalidate" function) that is called the first time cam_periph_invalidate() is called for a peripheral. - Create new foooninvalidate() routines for each peripheral driver. This routine is always called at splsoftcam(), and contains all the stuff that used to be in the AC_LOST_DEVICE case of the async callback handler. - Move the devstat cleanup call to the destructor/cleanup routines, since some of the drivers do I/O in their close routines. - Make sure that when we're flushing the buffer queue, we traverse it at splbio(). - Add a check for the invalid flag in the pt driver's open routine. Reviewed by: gibbs
1998-10-22 22:16:56 +00:00
static void
choninvalidate(struct cam_periph *periph)
{
struct ch_softc *softc;
struct ccb_setasync csa;
softc = (struct ch_softc *)periph->softc;
/*
* De-register any async callbacks.
*/
xpt_setup_ccb(&csa.ccb_h, periph->path,
/* priority */ 5);
csa.ccb_h.func_code = XPT_SASYNC_CB;
csa.event_enable = 0;
csa.callback = chasync;
csa.callback_arg = periph;
xpt_action((union ccb *)&csa);
softc->flags |= CH_FLAG_INVALID;
xpt_print_path(periph->path);
printf("lost device\n");
}
static void
chcleanup(struct cam_periph *periph)
{
Fix a problem with the way we handled device invalidation when attaching to a device failed. In theory, the same steps that happen when we get an AC_LOST_DEVICE async notification should have been taken when a driver fails to attach. In practice, that wasn't the case. This only affected the da, cd and ch drivers, but the fix affects all peripheral drivers. There were several possible problems: - In the da driver, we didn't remove the peripheral's softc from the da driver's linked list of softcs. Once the peripheral and softc got removed, we'd get a kernel panic the next time the timeout routine called dasendorderedtag(). - In the da, cd and possibly ch drivers, we didn't remove the peripheral's devstat structure from the devstat queue. Once the peripheral and softc were removed, this could cause a panic if anyone tried to access device statistics. (one component of the linked list wouldn't exist anymore) - In the cd driver, we didn't take the peripheral off the changer run queue if it was scheduled to run. In practice, it's highly unlikely, and maybe impossible that the peripheral would have been on the changer run queue at that stage of the probe process. The fix is: - Add a new peripheral callback function (the "oninvalidate" function) that is called the first time cam_periph_invalidate() is called for a peripheral. - Create new foooninvalidate() routines for each peripheral driver. This routine is always called at splsoftcam(), and contains all the stuff that used to be in the AC_LOST_DEVICE case of the async callback handler. - Move the devstat cleanup call to the destructor/cleanup routines, since some of the drivers do I/O in their close routines. - Make sure that when we're flushing the buffer queue, we traverse it at splbio(). - Add a check for the invalid flag in the pt driver's open routine. Reviewed by: gibbs
1998-10-22 22:16:56 +00:00
struct ch_softc *softc;
Fix a problem with the way we handled device invalidation when attaching to a device failed. In theory, the same steps that happen when we get an AC_LOST_DEVICE async notification should have been taken when a driver fails to attach. In practice, that wasn't the case. This only affected the da, cd and ch drivers, but the fix affects all peripheral drivers. There were several possible problems: - In the da driver, we didn't remove the peripheral's softc from the da driver's linked list of softcs. Once the peripheral and softc got removed, we'd get a kernel panic the next time the timeout routine called dasendorderedtag(). - In the da, cd and possibly ch drivers, we didn't remove the peripheral's devstat structure from the devstat queue. Once the peripheral and softc were removed, this could cause a panic if anyone tried to access device statistics. (one component of the linked list wouldn't exist anymore) - In the cd driver, we didn't take the peripheral off the changer run queue if it was scheduled to run. In practice, it's highly unlikely, and maybe impossible that the peripheral would have been on the changer run queue at that stage of the probe process. The fix is: - Add a new peripheral callback function (the "oninvalidate" function) that is called the first time cam_periph_invalidate() is called for a peripheral. - Create new foooninvalidate() routines for each peripheral driver. This routine is always called at splsoftcam(), and contains all the stuff that used to be in the AC_LOST_DEVICE case of the async callback handler. - Move the devstat cleanup call to the destructor/cleanup routines, since some of the drivers do I/O in their close routines. - Make sure that when we're flushing the buffer queue, we traverse it at splbio(). - Add a check for the invalid flag in the pt driver's open routine. Reviewed by: gibbs
1998-10-22 22:16:56 +00:00
softc = (struct ch_softc *)periph->softc;
devstat_remove_entry(&softc->device_stats);
destroy_dev(softc->dev);
Fix a problem with the way we handled device invalidation when attaching to a device failed. In theory, the same steps that happen when we get an AC_LOST_DEVICE async notification should have been taken when a driver fails to attach. In practice, that wasn't the case. This only affected the da, cd and ch drivers, but the fix affects all peripheral drivers. There were several possible problems: - In the da driver, we didn't remove the peripheral's softc from the da driver's linked list of softcs. Once the peripheral and softc got removed, we'd get a kernel panic the next time the timeout routine called dasendorderedtag(). - In the da, cd and possibly ch drivers, we didn't remove the peripheral's devstat structure from the devstat queue. Once the peripheral and softc were removed, this could cause a panic if anyone tried to access device statistics. (one component of the linked list wouldn't exist anymore) - In the cd driver, we didn't take the peripheral off the changer run queue if it was scheduled to run. In practice, it's highly unlikely, and maybe impossible that the peripheral would have been on the changer run queue at that stage of the probe process. The fix is: - Add a new peripheral callback function (the "oninvalidate" function) that is called the first time cam_periph_invalidate() is called for a peripheral. - Create new foooninvalidate() routines for each peripheral driver. This routine is always called at splsoftcam(), and contains all the stuff that used to be in the AC_LOST_DEVICE case of the async callback handler. - Move the devstat cleanup call to the destructor/cleanup routines, since some of the drivers do I/O in their close routines. - Make sure that when we're flushing the buffer queue, we traverse it at splbio(). - Add a check for the invalid flag in the pt driver's open routine. Reviewed by: gibbs
1998-10-22 22:16:56 +00:00
cam_extend_release(chperiphs, periph->unit_number);
xpt_print_path(periph->path);
printf("removing device entry\n");
free(softc, M_DEVBUF);
}
static void
chasync(void *callback_arg, u_int32_t code, struct cam_path *path, void *arg)
{
struct cam_periph *periph;
periph = (struct cam_periph *)callback_arg;
switch(code) {
case AC_FOUND_DEVICE:
{
struct ccb_getdev *cgd;
cam_status status;
cgd = (struct ccb_getdev *)arg;
if (cgd == NULL)
break;
if (SID_TYPE(&cgd->inq_data)!= T_CHANGER)
break;
/*
* Allocate a peripheral instance for
* this device and start the probe
* process.
*/
Fix a problem with the way we handled device invalidation when attaching to a device failed. In theory, the same steps that happen when we get an AC_LOST_DEVICE async notification should have been taken when a driver fails to attach. In practice, that wasn't the case. This only affected the da, cd and ch drivers, but the fix affects all peripheral drivers. There were several possible problems: - In the da driver, we didn't remove the peripheral's softc from the da driver's linked list of softcs. Once the peripheral and softc got removed, we'd get a kernel panic the next time the timeout routine called dasendorderedtag(). - In the da, cd and possibly ch drivers, we didn't remove the peripheral's devstat structure from the devstat queue. Once the peripheral and softc were removed, this could cause a panic if anyone tried to access device statistics. (one component of the linked list wouldn't exist anymore) - In the cd driver, we didn't take the peripheral off the changer run queue if it was scheduled to run. In practice, it's highly unlikely, and maybe impossible that the peripheral would have been on the changer run queue at that stage of the probe process. The fix is: - Add a new peripheral callback function (the "oninvalidate" function) that is called the first time cam_periph_invalidate() is called for a peripheral. - Create new foooninvalidate() routines for each peripheral driver. This routine is always called at splsoftcam(), and contains all the stuff that used to be in the AC_LOST_DEVICE case of the async callback handler. - Move the devstat cleanup call to the destructor/cleanup routines, since some of the drivers do I/O in their close routines. - Make sure that when we're flushing the buffer queue, we traverse it at splbio(). - Add a check for the invalid flag in the pt driver's open routine. Reviewed by: gibbs
1998-10-22 22:16:56 +00:00
status = cam_periph_alloc(chregister, choninvalidate,
chcleanup, chstart, "ch",
CAM_PERIPH_BIO, cgd->ccb_h.path,
chasync, AC_FOUND_DEVICE, cgd);
if (status != CAM_REQ_CMP
&& status != CAM_REQ_INPROG)
printf("chasync: Unable to probe new device "
"due to status 0x%x\n", status);
break;
}
default:
cam_periph_async(periph, code, path, arg);
break;
}
}
static cam_status
chregister(struct cam_periph *periph, void *arg)
{
struct ch_softc *softc;
struct ccb_setasync csa;
struct ccb_getdev *cgd;
cgd = (struct ccb_getdev *)arg;
if (periph == NULL) {
printf("chregister: periph was NULL!!\n");
return(CAM_REQ_CMP_ERR);
}
if (cgd == NULL) {
printf("chregister: no getdev CCB, can't register device\n");
return(CAM_REQ_CMP_ERR);
}
softc = (struct ch_softc *)malloc(sizeof(*softc),M_DEVBUF,M_NOWAIT);
if (softc == NULL) {
printf("chregister: Unable to probe new device. "
"Unable to allocate softc\n");
return(CAM_REQ_CMP_ERR);
}
bzero(softc, sizeof(*softc));
softc->state = CH_STATE_PROBE;
periph->softc = softc;
cam_extend_set(chperiphs, periph->unit_number, periph);
softc->quirks = CH_Q_NONE;
/*
* Changers don't have a blocksize, and obviously don't support
* tagged queueing.
*/
devstat_add_entry(&softc->device_stats, "ch",
periph->unit_number, 0,
DEVSTAT_NO_BLOCKSIZE | DEVSTAT_NO_ORDERED_TAGS,
SID_TYPE(&cgd->inq_data)| DEVSTAT_TYPE_IF_SCSI,
DEVSTAT_PRIORITY_OTHER);
/* Register the device */
softc->dev = make_dev(&ch_cdevsw, periph->unit_number, UID_ROOT,
GID_OPERATOR, 0600, "%s%d", periph->periph_name,
periph->unit_number);
/*
* Add an async callback so that we get
* notified if this device goes away.
*/
xpt_setup_ccb(&csa.ccb_h, periph->path, /* priority */ 5);
csa.ccb_h.func_code = XPT_SASYNC_CB;
csa.event_enable = AC_LOST_DEVICE;
csa.callback = chasync;
csa.callback_arg = periph;
xpt_action((union ccb *)&csa);
/*
* Lock this peripheral until we are setup.
* This first call can't block
*/
(void)cam_periph_lock(periph, PRIBIO);
xpt_schedule(periph, /*priority*/5);
return(CAM_REQ_CMP);
}
static int
chopen(dev_t dev, int flags, int fmt, struct thread *td)
{
struct cam_periph *periph;
struct ch_softc *softc;
int unit, error;
Fix a problem with the way we handled device invalidation when attaching to a device failed. In theory, the same steps that happen when we get an AC_LOST_DEVICE async notification should have been taken when a driver fails to attach. In practice, that wasn't the case. This only affected the da, cd and ch drivers, but the fix affects all peripheral drivers. There were several possible problems: - In the da driver, we didn't remove the peripheral's softc from the da driver's linked list of softcs. Once the peripheral and softc got removed, we'd get a kernel panic the next time the timeout routine called dasendorderedtag(). - In the da, cd and possibly ch drivers, we didn't remove the peripheral's devstat structure from the devstat queue. Once the peripheral and softc were removed, this could cause a panic if anyone tried to access device statistics. (one component of the linked list wouldn't exist anymore) - In the cd driver, we didn't take the peripheral off the changer run queue if it was scheduled to run. In practice, it's highly unlikely, and maybe impossible that the peripheral would have been on the changer run queue at that stage of the probe process. The fix is: - Add a new peripheral callback function (the "oninvalidate" function) that is called the first time cam_periph_invalidate() is called for a peripheral. - Create new foooninvalidate() routines for each peripheral driver. This routine is always called at splsoftcam(), and contains all the stuff that used to be in the AC_LOST_DEVICE case of the async callback handler. - Move the devstat cleanup call to the destructor/cleanup routines, since some of the drivers do I/O in their close routines. - Make sure that when we're flushing the buffer queue, we traverse it at splbio(). - Add a check for the invalid flag in the pt driver's open routine. Reviewed by: gibbs
1998-10-22 22:16:56 +00:00
int s;
unit = CHUNIT(dev);
periph = cam_extend_get(chperiphs, unit);
if (periph == NULL)
return(ENXIO);
softc = (struct ch_softc *)periph->softc;
Fix a problem with the way we handled device invalidation when attaching to a device failed. In theory, the same steps that happen when we get an AC_LOST_DEVICE async notification should have been taken when a driver fails to attach. In practice, that wasn't the case. This only affected the da, cd and ch drivers, but the fix affects all peripheral drivers. There were several possible problems: - In the da driver, we didn't remove the peripheral's softc from the da driver's linked list of softcs. Once the peripheral and softc got removed, we'd get a kernel panic the next time the timeout routine called dasendorderedtag(). - In the da, cd and possibly ch drivers, we didn't remove the peripheral's devstat structure from the devstat queue. Once the peripheral and softc were removed, this could cause a panic if anyone tried to access device statistics. (one component of the linked list wouldn't exist anymore) - In the cd driver, we didn't take the peripheral off the changer run queue if it was scheduled to run. In practice, it's highly unlikely, and maybe impossible that the peripheral would have been on the changer run queue at that stage of the probe process. The fix is: - Add a new peripheral callback function (the "oninvalidate" function) that is called the first time cam_periph_invalidate() is called for a peripheral. - Create new foooninvalidate() routines for each peripheral driver. This routine is always called at splsoftcam(), and contains all the stuff that used to be in the AC_LOST_DEVICE case of the async callback handler. - Move the devstat cleanup call to the destructor/cleanup routines, since some of the drivers do I/O in their close routines. - Make sure that when we're flushing the buffer queue, we traverse it at splbio(). - Add a check for the invalid flag in the pt driver's open routine. Reviewed by: gibbs
1998-10-22 22:16:56 +00:00
s = splsoftcam();
if (softc->flags & CH_FLAG_INVALID) {
splx(s);
return(ENXIO);
Fix a problem with the way we handled device invalidation when attaching to a device failed. In theory, the same steps that happen when we get an AC_LOST_DEVICE async notification should have been taken when a driver fails to attach. In practice, that wasn't the case. This only affected the da, cd and ch drivers, but the fix affects all peripheral drivers. There were several possible problems: - In the da driver, we didn't remove the peripheral's softc from the da driver's linked list of softcs. Once the peripheral and softc got removed, we'd get a kernel panic the next time the timeout routine called dasendorderedtag(). - In the da, cd and possibly ch drivers, we didn't remove the peripheral's devstat structure from the devstat queue. Once the peripheral and softc were removed, this could cause a panic if anyone tried to access device statistics. (one component of the linked list wouldn't exist anymore) - In the cd driver, we didn't take the peripheral off the changer run queue if it was scheduled to run. In practice, it's highly unlikely, and maybe impossible that the peripheral would have been on the changer run queue at that stage of the probe process. The fix is: - Add a new peripheral callback function (the "oninvalidate" function) that is called the first time cam_periph_invalidate() is called for a peripheral. - Create new foooninvalidate() routines for each peripheral driver. This routine is always called at splsoftcam(), and contains all the stuff that used to be in the AC_LOST_DEVICE case of the async callback handler. - Move the devstat cleanup call to the destructor/cleanup routines, since some of the drivers do I/O in their close routines. - Make sure that when we're flushing the buffer queue, we traverse it at splbio(). - Add a check for the invalid flag in the pt driver's open routine. Reviewed by: gibbs
1998-10-22 22:16:56 +00:00
}
if ((error = cam_periph_lock(periph, PRIBIO | PCATCH)) != 0) {
splx(s);
return (error);
}
splx(s);
if ((softc->flags & CH_FLAG_OPEN) == 0) {
if (cam_periph_acquire(periph) != CAM_REQ_CMP)
return(ENXIO);
softc->flags |= CH_FLAG_OPEN;
}
/*
* Load information about this changer device into the softc.
*/
if ((error = chgetparams(periph)) != 0) {
softc->flags &= ~CH_FLAG_OPEN;
cam_periph_unlock(periph);
cam_periph_release(periph);
return(error);
}
cam_periph_unlock(periph);
return(error);
}
static int
chclose(dev_t dev, int flag, int fmt, struct thread *td)
{
struct cam_periph *periph;
struct ch_softc *softc;
int unit, error;
error = 0;
unit = CHUNIT(dev);
periph = cam_extend_get(chperiphs, unit);
if (periph == NULL)
return(ENXIO);
softc = (struct ch_softc *)periph->softc;
if ((error = cam_periph_lock(periph, PRIBIO)) != 0)
return(error);
softc->flags &= ~CH_FLAG_OPEN;
cam_periph_unlock(periph);
cam_periph_release(periph);
return(0);
}
static void
chstart(struct cam_periph *periph, union ccb *start_ccb)
{
struct ch_softc *softc;
int s;
softc = (struct ch_softc *)periph->softc;
switch (softc->state) {
case CH_STATE_NORMAL:
{
s = splbio();
if (periph->immediate_priority <= periph->pinfo.priority){
start_ccb->ccb_h.ccb_state = CH_CCB_WAITING;
SLIST_INSERT_HEAD(&periph->ccb_list, &start_ccb->ccb_h,
periph_links.sle);
periph->immediate_priority = CAM_PRIORITY_NONE;
splx(s);
wakeup(&periph->ccb_list);
} else
splx(s);
break;
}
case CH_STATE_PROBE:
{
int mode_buffer_len;
void *mode_buffer;
/*
* Include the block descriptor when calculating the mode
* buffer length,
*/
mode_buffer_len = sizeof(struct scsi_mode_header_6) +
sizeof(struct scsi_mode_blk_desc) +
sizeof(struct page_element_address_assignment);
mode_buffer = malloc(mode_buffer_len, M_TEMP, M_NOWAIT);
if (mode_buffer == NULL) {
printf("chstart: couldn't malloc mode sense data\n");
break;
}
bzero(mode_buffer, mode_buffer_len);
/*
* Get the element address assignment page.
*/
scsi_mode_sense(&start_ccb->csio,
/* retries */ 1,
/* cbfcnp */ chdone,
/* tag_action */ MSG_SIMPLE_Q_TAG,
/* dbd */ (softc->quirks & CH_Q_NO_DBD) ?
FALSE : TRUE,
/* page_code */ SMS_PAGE_CTRL_CURRENT,
/* page */ CH_ELEMENT_ADDR_ASSIGN_PAGE,
/* param_buf */ (u_int8_t *)mode_buffer,
/* param_len */ mode_buffer_len,
/* sense_len */ SSD_FULL_SIZE,
/* timeout */ CH_TIMEOUT_MODE_SENSE);
start_ccb->ccb_h.ccb_bp = NULL;
start_ccb->ccb_h.ccb_state = CH_CCB_PROBE;
xpt_action(start_ccb);
break;
}
}
}
static void
chdone(struct cam_periph *periph, union ccb *done_ccb)
{
struct ch_softc *softc;
struct ccb_scsiio *csio;
softc = (struct ch_softc *)periph->softc;
csio = &done_ccb->csio;
switch(done_ccb->ccb_h.ccb_state) {
case CH_CCB_PROBE:
{
struct scsi_mode_header_6 *mode_header;
struct page_element_address_assignment *ea;
char announce_buf[80];
mode_header = (struct scsi_mode_header_6 *)csio->data_ptr;
ea = (struct page_element_address_assignment *)
find_mode_page_6(mode_header);
if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP){
softc->sc_firsts[CHET_MT] = scsi_2btoul(ea->mtea);
softc->sc_counts[CHET_MT] = scsi_2btoul(ea->nmte);
softc->sc_firsts[CHET_ST] = scsi_2btoul(ea->fsea);
softc->sc_counts[CHET_ST] = scsi_2btoul(ea->nse);
softc->sc_firsts[CHET_IE] = scsi_2btoul(ea->fieea);
softc->sc_counts[CHET_IE] = scsi_2btoul(ea->niee);
softc->sc_firsts[CHET_DT] = scsi_2btoul(ea->fdtea);
softc->sc_counts[CHET_DT] = scsi_2btoul(ea->ndte);
softc->sc_picker = softc->sc_firsts[CHET_MT];
#define PLURAL(c) (c) == 1 ? "" : "s"
snprintf(announce_buf, sizeof(announce_buf),
"%d slot%s, %d drive%s, "
"%d picker%s, %d portal%s",
softc->sc_counts[CHET_ST],
PLURAL(softc->sc_counts[CHET_ST]),
softc->sc_counts[CHET_DT],
PLURAL(softc->sc_counts[CHET_DT]),
softc->sc_counts[CHET_MT],
PLURAL(softc->sc_counts[CHET_MT]),
softc->sc_counts[CHET_IE],
PLURAL(softc->sc_counts[CHET_IE]));
#undef PLURAL
} else {
int error;
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
error = cherror(done_ccb, CAM_RETRY_SELTO,
SF_RETRY_UA | SF_NO_PRINT);
/*
* Retry any UNIT ATTENTION type errors. They
* are expected at boot.
*/
if (error == ERESTART) {
/*
* A retry was scheuled, so
* just return.
*/
return;
} else if (error != 0) {
int retry_scheduled;
struct scsi_mode_sense_6 *sms;
sms = (struct scsi_mode_sense_6 *)
done_ccb->csio.cdb_io.cdb_bytes;
/*
* Check to see if block descriptors were
* disabled. Some devices don't like that.
* We're taking advantage of the fact that
* the first few bytes of the 6 and 10 byte
* mode sense commands are the same. If
* block descriptors were disabled, enable
* them and re-send the command.
*/
if (sms->byte2 & SMS_DBD) {
sms->byte2 &= ~SMS_DBD;
xpt_action(done_ccb);
softc->quirks |= CH_Q_NO_DBD;
retry_scheduled = 1;
} else
retry_scheduled = 0;
/* Don't wedge this device's queue */
cam_release_devq(done_ccb->ccb_h.path,
/*relsim_flags*/0,
/*reduction*/0,
/*timeout*/0,
/*getcount_only*/0);
if (retry_scheduled)
return;
if ((done_ccb->ccb_h.status & CAM_STATUS_MASK)
== CAM_SCSI_STATUS_ERROR)
scsi_sense_print(&done_ccb->csio);
else {
xpt_print_path(periph->path);
printf("got CAM status %#x\n",
done_ccb->ccb_h.status);
}
xpt_print_path(periph->path);
printf("fatal error, failed to attach to"
" device\n");
cam_periph_invalidate(periph);
announce_buf[0] = '\0';
}
}
if (announce_buf[0] != '\0')
xpt_announce_periph(periph, announce_buf);
softc->state = CH_STATE_NORMAL;
free(mode_header, M_TEMP);
/*
* Since our peripheral may be invalidated by an error
* above or an external event, we must release our CCB
* before releasing the probe lock on the peripheral.
* The peripheral will only go away once the last lock
* is removed, and we need it around for the CCB release
* operation.
*/
xpt_release_ccb(done_ccb);
cam_periph_unlock(periph);
return;
}
case CH_CCB_WAITING:
{
/* Caller will release the CCB */
wakeup(&done_ccb->ccb_h.cbfcnp);
return;
}
default:
break;
}
xpt_release_ccb(done_ccb);
}
static int
cherror(union ccb *ccb, u_int32_t cam_flags, u_int32_t sense_flags)
{
struct ch_softc *softc;
struct cam_periph *periph;
periph = xpt_path_periph(ccb->ccb_h.path);
softc = (struct ch_softc *)periph->softc;
return (cam_periph_error(ccb, cam_flags, sense_flags,
&softc->saved_ccb));
}
static int
chioctl(dev_t dev, u_long cmd, caddr_t addr, int flag, struct thread *td)
{
struct cam_periph *periph;
struct ch_softc *softc;
u_int8_t unit;
int error;
unit = CHUNIT(dev);
periph = cam_extend_get(chperiphs, unit);
if (periph == NULL)
return(ENXIO);
CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("entering chioctl\n"));
softc = (struct ch_softc *)periph->softc;
error = 0;
CAM_DEBUG(periph->path, CAM_DEBUG_TRACE,
("trying to do ioctl %#lx\n", cmd));
/*
* If this command can change the device's state, we must
* have the device open for writing.
*/
switch (cmd) {
case CHIOGPICKER:
case CHIOGPARAMS:
case CHIOGSTATUS:
break;
default:
if ((flag & FWRITE) == 0)
return (EBADF);
}
switch (cmd) {
case CHIOMOVE:
error = chmove(periph, (struct changer_move *)addr);
break;
case CHIOEXCHANGE:
error = chexchange(periph, (struct changer_exchange *)addr);
break;
case CHIOPOSITION:
error = chposition(periph, (struct changer_position *)addr);
break;
case CHIOGPICKER:
*(int *)addr = softc->sc_picker - softc->sc_firsts[CHET_MT];
break;
case CHIOSPICKER:
{
int new_picker = *(int *)addr;
if (new_picker > (softc->sc_counts[CHET_MT] - 1))
return (EINVAL);
softc->sc_picker = softc->sc_firsts[CHET_MT] + new_picker;
break;
}
case CHIOGPARAMS:
{
struct changer_params *cp = (struct changer_params *)addr;
cp->cp_npickers = softc->sc_counts[CHET_MT];
cp->cp_nslots = softc->sc_counts[CHET_ST];
cp->cp_nportals = softc->sc_counts[CHET_IE];
cp->cp_ndrives = softc->sc_counts[CHET_DT];
break;
}
case CHIOIELEM:
error = chielem(periph, *(unsigned int *)addr);
break;
case CHIOGSTATUS:
{
error = chgetelemstatus(periph,
(struct changer_element_status_request *) addr);
break;
}
case CHIOSETVOLTAG:
{
error = chsetvoltag(periph,
(struct changer_set_voltag_request *) addr);
break;
}
/* Implement prevent/allow? */
default:
error = cam_periph_ioctl(periph, cmd, addr, cherror);
break;
}
return (error);
}
static int
chmove(struct cam_periph *periph, struct changer_move *cm)
{
struct ch_softc *softc;
u_int16_t fromelem, toelem;
union ccb *ccb;
int error;
error = 0;
softc = (struct ch_softc *)periph->softc;
/*
* Check arguments.
*/
if ((cm->cm_fromtype > CHET_DT) || (cm->cm_totype > CHET_DT))
return (EINVAL);
if ((cm->cm_fromunit > (softc->sc_counts[cm->cm_fromtype] - 1)) ||
(cm->cm_tounit > (softc->sc_counts[cm->cm_totype] - 1)))
return (ENODEV);
/*
* Check the request against the changer's capabilities.
*/
if ((softc->sc_movemask[cm->cm_fromtype] & (1 << cm->cm_totype)) == 0)
return (ENODEV);
/*
* Calculate the source and destination elements.
*/
fromelem = softc->sc_firsts[cm->cm_fromtype] + cm->cm_fromunit;
toelem = softc->sc_firsts[cm->cm_totype] + cm->cm_tounit;
ccb = cam_periph_getccb(periph, /*priority*/ 1);
scsi_move_medium(&ccb->csio,
/* retries */ 1,
/* cbfcnp */ chdone,
/* tag_action */ MSG_SIMPLE_Q_TAG,
/* tea */ softc->sc_picker,
/* src */ fromelem,
/* dst */ toelem,
/* invert */ (cm->cm_flags & CM_INVERT) ? TRUE : FALSE,
/* sense_len */ SSD_FULL_SIZE,
/* timeout */ CH_TIMEOUT_MOVE_MEDIUM);
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
error = cam_periph_runccb(ccb, cherror, /*cam_flags*/CAM_RETRY_SELTO,
/*sense_flags*/ SF_RETRY_UA,
&softc->device_stats);
xpt_release_ccb(ccb);
return(error);
}
static int
chexchange(struct cam_periph *periph, struct changer_exchange *ce)
{
struct ch_softc *softc;
u_int16_t src, dst1, dst2;
union ccb *ccb;
int error;
error = 0;
softc = (struct ch_softc *)periph->softc;
/*
* Check arguments.
*/
if ((ce->ce_srctype > CHET_DT) || (ce->ce_fdsttype > CHET_DT) ||
(ce->ce_sdsttype > CHET_DT))
return (EINVAL);
if ((ce->ce_srcunit > (softc->sc_counts[ce->ce_srctype] - 1)) ||
(ce->ce_fdstunit > (softc->sc_counts[ce->ce_fdsttype] - 1)) ||
(ce->ce_sdstunit > (softc->sc_counts[ce->ce_sdsttype] - 1)))
return (ENODEV);
/*
* Check the request against the changer's capabilities.
*/
if (((softc->sc_exchangemask[ce->ce_srctype] &
(1 << ce->ce_fdsttype)) == 0) ||
((softc->sc_exchangemask[ce->ce_fdsttype] &
(1 << ce->ce_sdsttype)) == 0))
return (ENODEV);
/*
* Calculate the source and destination elements.
*/
src = softc->sc_firsts[ce->ce_srctype] + ce->ce_srcunit;
dst1 = softc->sc_firsts[ce->ce_fdsttype] + ce->ce_fdstunit;
dst2 = softc->sc_firsts[ce->ce_sdsttype] + ce->ce_sdstunit;
ccb = cam_periph_getccb(periph, /*priority*/ 1);
scsi_exchange_medium(&ccb->csio,
/* retries */ 1,
/* cbfcnp */ chdone,
/* tag_action */ MSG_SIMPLE_Q_TAG,
/* tea */ softc->sc_picker,
/* src */ src,
/* dst1 */ dst1,
/* dst2 */ dst2,
/* invert1 */ (ce->ce_flags & CE_INVERT1) ?
TRUE : FALSE,
/* invert2 */ (ce->ce_flags & CE_INVERT2) ?
TRUE : FALSE,
/* sense_len */ SSD_FULL_SIZE,
/* timeout */ CH_TIMEOUT_EXCHANGE_MEDIUM);
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
error = cam_periph_runccb(ccb, cherror, /*cam_flags*/CAM_RETRY_SELTO,
/*sense_flags*/ SF_RETRY_UA,
&softc->device_stats);
xpt_release_ccb(ccb);
return(error);
}
static int
chposition(struct cam_periph *periph, struct changer_position *cp)
{
struct ch_softc *softc;
u_int16_t dst;
union ccb *ccb;
int error;
error = 0;
softc = (struct ch_softc *)periph->softc;
/*
* Check arguments.
*/
if (cp->cp_type > CHET_DT)
return (EINVAL);
if (cp->cp_unit > (softc->sc_counts[cp->cp_type] - 1))
return (ENODEV);
/*
* Calculate the destination element.
*/
dst = softc->sc_firsts[cp->cp_type] + cp->cp_unit;
ccb = cam_periph_getccb(periph, /*priority*/ 1);
scsi_position_to_element(&ccb->csio,
/* retries */ 1,
/* cbfcnp */ chdone,
/* tag_action */ MSG_SIMPLE_Q_TAG,
/* tea */ softc->sc_picker,
/* dst */ dst,
/* invert */ (cp->cp_flags & CP_INVERT) ?
TRUE : FALSE,
/* sense_len */ SSD_FULL_SIZE,
/* timeout */ CH_TIMEOUT_POSITION_TO_ELEMENT);
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
error = cam_periph_runccb(ccb, cherror, /*cam_flags*/ CAM_RETRY_SELTO,
/*sense_flags*/ SF_RETRY_UA,
&softc->device_stats);
xpt_release_ccb(ccb);
return(error);
}
/*
* Copy a volume tag to a volume_tag struct, converting SCSI byte order
* to host native byte order in the volume serial number. The volume
* label as returned by the changer is transferred to user mode as
* nul-terminated string. Volume labels are truncated at the first
* space, as suggested by SCSI-2.
*/
static void
copy_voltag(struct changer_voltag *uvoltag, struct volume_tag *voltag)
{
int i;
for (i=0; i<CH_VOLTAG_MAXLEN; i++) {
char c = voltag->vif[i];
if (c && c != ' ')
uvoltag->cv_volid[i] = c;
else
break;
}
uvoltag->cv_serial = scsi_2btoul(voltag->vsn);
}
/*
* Copy an an element status descriptor to a user-mode
* changer_element_status structure.
*/
static void
copy_element_status(struct ch_softc *softc,
u_int16_t flags,
struct read_element_status_descriptor *desc,
struct changer_element_status *ces)
{
u_int16_t eaddr = scsi_2btoul(desc->eaddr);
u_int16_t et;
ces->ces_int_addr = eaddr;
/* set up logical address in element status */
for (et = CHET_MT; et <= CHET_DT; et++) {
if ((softc->sc_firsts[et] <= eaddr)
&& ((softc->sc_firsts[et] + softc->sc_counts[et])
> eaddr)) {
ces->ces_addr = eaddr - softc->sc_firsts[et];
ces->ces_type = et;
break;
}
}
ces->ces_flags = desc->flags1;
ces->ces_sensecode = desc->sense_code;
ces->ces_sensequal = desc->sense_qual;
if (desc->flags2 & READ_ELEMENT_STATUS_INVERT)
ces->ces_flags |= CES_INVERT;
if (desc->flags2 & READ_ELEMENT_STATUS_SVALID) {
eaddr = scsi_2btoul(desc->ssea);
/* convert source address to logical format */
for (et = CHET_MT; et <= CHET_DT; et++) {
if ((softc->sc_firsts[et] <= eaddr)
&& ((softc->sc_firsts[et] + softc->sc_counts[et])
> eaddr)) {
ces->ces_source_addr =
eaddr - softc->sc_firsts[et];
ces->ces_source_type = et;
ces->ces_flags |= CES_SOURCE_VALID;
break;
}
}
if (!(ces->ces_flags & CES_SOURCE_VALID))
printf("ch: warning: could not map element source "
"address %ud to a valid element type\n",
eaddr);
}
if (flags & READ_ELEMENT_STATUS_PVOLTAG)
copy_voltag(&(ces->ces_pvoltag), &(desc->pvoltag));
if (flags & READ_ELEMENT_STATUS_AVOLTAG)
copy_voltag(&(ces->ces_avoltag), &(desc->avoltag));
if (desc->dt_scsi_flags & READ_ELEMENT_STATUS_DT_IDVALID) {
ces->ces_flags |= CES_SCSIID_VALID;
ces->ces_scsi_id = desc->dt_scsi_addr;
}
if (desc->dt_scsi_addr & READ_ELEMENT_STATUS_DT_LUVALID) {
ces->ces_flags |= CES_LUN_VALID;
ces->ces_scsi_lun =
desc->dt_scsi_flags & READ_ELEMENT_STATUS_DT_LUNMASK;
}
}
static int
chgetelemstatus(struct cam_periph *periph,
struct changer_element_status_request *cesr)
{
struct read_element_status_header *st_hdr;
struct read_element_status_page_header *pg_hdr;
struct read_element_status_descriptor *desc;
caddr_t data = NULL;
size_t size, desclen;
int avail, i, error = 0;
struct changer_element_status *user_data = NULL;
struct ch_softc *softc;
union ccb *ccb;
int chet = cesr->cesr_element_type;
int want_voltags = (cesr->cesr_flags & CESR_VOLTAGS) ? 1 : 0;
softc = (struct ch_softc *)periph->softc;
/* perform argument checking */
/*
* Perform a range check on the cesr_element_{base,count}
* request argument fields.
*/
if ((softc->sc_counts[chet] - cesr->cesr_element_base) <= 0
|| (cesr->cesr_element_base + cesr->cesr_element_count)
> softc->sc_counts[chet])
return (EINVAL);
/*
* Request one descriptor for the given element type. This
* is used to determine the size of the descriptor so that
* we can allocate enough storage for all of them. We assume
* that the first one can fit into 1k.
*/
data = (caddr_t)malloc(1024, M_DEVBUF, M_WAITOK);
ccb = cam_periph_getccb(periph, /*priority*/ 1);
scsi_read_element_status(&ccb->csio,
/* retries */ 1,
/* cbfcnp */ chdone,
/* tag_action */ MSG_SIMPLE_Q_TAG,
/* voltag */ want_voltags,
/* sea */ softc->sc_firsts[chet],
/* count */ 1,
/* data_ptr */ data,
/* dxfer_len */ 1024,
/* sense_len */ SSD_FULL_SIZE,
/* timeout */ CH_TIMEOUT_READ_ELEMENT_STATUS);
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
error = cam_periph_runccb(ccb, cherror, /*cam_flags*/ CAM_RETRY_SELTO,
/*sense_flags*/ SF_RETRY_UA,
&softc->device_stats);
if (error)
goto done;
st_hdr = (struct read_element_status_header *)data;
pg_hdr = (struct read_element_status_page_header *)((uintptr_t)st_hdr +
sizeof(struct read_element_status_header));
desclen = scsi_2btoul(pg_hdr->edl);
size = sizeof(struct read_element_status_header) +
sizeof(struct read_element_status_page_header) +
(desclen * cesr->cesr_element_count);
/*
* Reallocate storage for descriptors and get them from the
* device.
*/
free(data, M_DEVBUF);
data = (caddr_t)malloc(size, M_DEVBUF, M_WAITOK);
scsi_read_element_status(&ccb->csio,
/* retries */ 1,
/* cbfcnp */ chdone,
/* tag_action */ MSG_SIMPLE_Q_TAG,
/* voltag */ want_voltags,
/* sea */ softc->sc_firsts[chet]
+ cesr->cesr_element_base,
/* count */ cesr->cesr_element_count,
/* data_ptr */ data,
/* dxfer_len */ size,
/* sense_len */ SSD_FULL_SIZE,
/* timeout */ CH_TIMEOUT_READ_ELEMENT_STATUS);
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
error = cam_periph_runccb(ccb, cherror, /*cam_flags*/ CAM_RETRY_SELTO,
/*sense_flags*/ SF_RETRY_UA,
&softc->device_stats);
if (error)
goto done;
/*
* Fill in the user status array.
*/
st_hdr = (struct read_element_status_header *)data;
avail = scsi_2btoul(st_hdr->count);
if (avail != cesr->cesr_element_count) {
xpt_print_path(periph->path);
printf("warning, READ ELEMENT STATUS avail != count\n");
}
user_data = (struct changer_element_status *)
malloc(avail * sizeof(struct changer_element_status),
M_DEVBUF, M_WAITOK | M_ZERO);
desc = (struct read_element_status_descriptor *)((uintptr_t)data +
sizeof(struct read_element_status_header) +
sizeof(struct read_element_status_page_header));
/*
* Set up the individual element status structures
*/
for (i = 0; i < avail; ++i) {
struct changer_element_status *ces = &(user_data[i]);
copy_element_status(softc, pg_hdr->flags, desc, ces);
desc = (struct read_element_status_descriptor *)
((uintptr_t)desc + desclen);
}
/* Copy element status structures out to userspace. */
error = copyout(user_data,
cesr->cesr_element_status,
avail * sizeof(struct changer_element_status));
done:
xpt_release_ccb(ccb);
if (data != NULL)
free(data, M_DEVBUF);
if (user_data != NULL)
free(user_data, M_DEVBUF);
return (error);
}
static int
chielem(struct cam_periph *periph,
unsigned int timeout)
{
union ccb *ccb;
struct ch_softc *softc;
int error;
if (!timeout) {
timeout = CH_TIMEOUT_INITIALIZE_ELEMENT_STATUS;
} else {
timeout *= 1000;
}
error = 0;
softc = (struct ch_softc *)periph->softc;
ccb = cam_periph_getccb(periph, /*priority*/ 1);
scsi_initialize_element_status(&ccb->csio,
/* retries */ 1,
/* cbfcnp */ chdone,
/* tag_action */ MSG_SIMPLE_Q_TAG,
/* sense_len */ SSD_FULL_SIZE,
/* timeout */ timeout);
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
error = cam_periph_runccb(ccb, cherror, /*cam_flags*/ CAM_RETRY_SELTO,
/*sense_flags*/ SF_RETRY_UA,
&softc->device_stats);
xpt_release_ccb(ccb);
return(error);
}
static int
chsetvoltag(struct cam_periph *periph,
struct changer_set_voltag_request *csvr)
{
union ccb *ccb;
struct ch_softc *softc;
u_int16_t ea;
u_int8_t sac;
struct scsi_send_volume_tag_parameters ssvtp;
int error;
int i;
error = 0;
softc = (struct ch_softc *)periph->softc;
bzero(&ssvtp, sizeof(ssvtp));
for (i=0; i<sizeof(ssvtp.vitf); i++) {
ssvtp.vitf[i] = ' ';
}
/*
* Check arguments.
*/
if (csvr->csvr_type > CHET_DT)
return EINVAL;
if (csvr->csvr_addr > (softc->sc_counts[csvr->csvr_type] - 1))
return ENODEV;
ea = softc->sc_firsts[csvr->csvr_type] + csvr->csvr_addr;
if (csvr->csvr_flags & CSVR_ALTERNATE) {
switch (csvr->csvr_flags & CSVR_MODE_MASK) {
case CSVR_MODE_SET:
sac = SEND_VOLUME_TAG_ASSERT_ALTERNATE;
break;
case CSVR_MODE_REPLACE:
sac = SEND_VOLUME_TAG_REPLACE_ALTERNATE;
break;
case CSVR_MODE_CLEAR:
sac = SEND_VOLUME_TAG_UNDEFINED_ALTERNATE;
break;
default:
error = EINVAL;
goto out;
}
} else {
switch (csvr->csvr_flags & CSVR_MODE_MASK) {
case CSVR_MODE_SET:
sac = SEND_VOLUME_TAG_ASSERT_PRIMARY;
break;
case CSVR_MODE_REPLACE:
sac = SEND_VOLUME_TAG_REPLACE_PRIMARY;
break;
case CSVR_MODE_CLEAR:
sac = SEND_VOLUME_TAG_UNDEFINED_PRIMARY;
break;
default:
error = EINVAL;
goto out;
}
}
memcpy(ssvtp.vitf, csvr->csvr_voltag.cv_volid,
min(strlen(csvr->csvr_voltag.cv_volid), sizeof(ssvtp.vitf)));
scsi_ulto2b(csvr->csvr_voltag.cv_serial, ssvtp.minvsn);
ccb = cam_periph_getccb(periph, /*priority*/ 1);
scsi_send_volume_tag(&ccb->csio,
/* retries */ 1,
/* cbfcnp */ chdone,
/* tag_action */ MSG_SIMPLE_Q_TAG,
/* element_address */ ea,
/* send_action_code */ sac,
/* parameters */ &ssvtp,
/* sense_len */ SSD_FULL_SIZE,
/* timeout */ CH_TIMEOUT_SEND_VOLTAG);
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
error = cam_periph_runccb(ccb, cherror, /*cam_flags*/ CAM_RETRY_SELTO,
/*sense_flags*/ SF_RETRY_UA,
&softc->device_stats);
xpt_release_ccb(ccb);
out:
return error;
}
static int
chgetparams(struct cam_periph *periph)
{
union ccb *ccb;
struct ch_softc *softc;
void *mode_buffer;
int mode_buffer_len;
struct page_element_address_assignment *ea;
struct page_device_capabilities *cap;
int error, from, dbd;
u_int8_t *moves, *exchanges;
error = 0;
softc = (struct ch_softc *)periph->softc;
ccb = cam_periph_getccb(periph, /*priority*/ 1);
/*
* The scsi_mode_sense_data structure is just a convenience
* structure that allows us to easily calculate the worst-case
* storage size of the mode sense buffer.
*/
mode_buffer_len = sizeof(struct scsi_mode_sense_data);
mode_buffer = malloc(mode_buffer_len, M_TEMP, M_NOWAIT);
if (mode_buffer == NULL) {
printf("chgetparams: couldn't malloc mode sense data\n");
return(ENOSPC);
}
bzero(mode_buffer, mode_buffer_len);
if (softc->quirks & CH_Q_NO_DBD)
dbd = FALSE;
else
dbd = TRUE;
/*
* Get the element address assignment page.
*/
scsi_mode_sense(&ccb->csio,
/* retries */ 1,
/* cbfcnp */ chdone,
/* tag_action */ MSG_SIMPLE_Q_TAG,
/* dbd */ dbd,
/* page_code */ SMS_PAGE_CTRL_CURRENT,
/* page */ CH_ELEMENT_ADDR_ASSIGN_PAGE,
/* param_buf */ (u_int8_t *)mode_buffer,
/* param_len */ mode_buffer_len,
/* sense_len */ SSD_FULL_SIZE,
/* timeout */ CH_TIMEOUT_MODE_SENSE);
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
error = cam_periph_runccb(ccb, cherror, /*cam_flags*/ CAM_RETRY_SELTO,
/* sense_flags */ SF_RETRY_UA|SF_NO_PRINT,
&softc->device_stats);
if (error) {
if (dbd) {
struct scsi_mode_sense_6 *sms;
sms = (struct scsi_mode_sense_6 *)
ccb->csio.cdb_io.cdb_bytes;
sms->byte2 &= ~SMS_DBD;
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
error = cam_periph_runccb(ccb, cherror,
/*cam_flags*/ CAM_RETRY_SELTO,
/*sense_flags*/ SF_RETRY_UA,
&softc->device_stats);
} else {
/*
* Since we disabled sense printing above, print
* out the sense here since we got an error.
*/
scsi_sense_print(&ccb->csio);
}
if (error) {
xpt_print_path(periph->path);
printf("chgetparams: error getting element "
"address page\n");
xpt_release_ccb(ccb);
free(mode_buffer, M_TEMP);
return(error);
}
}
ea = (struct page_element_address_assignment *)
find_mode_page_6((struct scsi_mode_header_6 *)mode_buffer);
softc->sc_firsts[CHET_MT] = scsi_2btoul(ea->mtea);
softc->sc_counts[CHET_MT] = scsi_2btoul(ea->nmte);
softc->sc_firsts[CHET_ST] = scsi_2btoul(ea->fsea);
softc->sc_counts[CHET_ST] = scsi_2btoul(ea->nse);
softc->sc_firsts[CHET_IE] = scsi_2btoul(ea->fieea);
softc->sc_counts[CHET_IE] = scsi_2btoul(ea->niee);
softc->sc_firsts[CHET_DT] = scsi_2btoul(ea->fdtea);
softc->sc_counts[CHET_DT] = scsi_2btoul(ea->ndte);
bzero(mode_buffer, mode_buffer_len);
/*
* Now get the device capabilities page.
*/
scsi_mode_sense(&ccb->csio,
/* retries */ 1,
/* cbfcnp */ chdone,
/* tag_action */ MSG_SIMPLE_Q_TAG,
/* dbd */ dbd,
/* page_code */ SMS_PAGE_CTRL_CURRENT,
/* page */ CH_DEVICE_CAP_PAGE,
/* param_buf */ (u_int8_t *)mode_buffer,
/* param_len */ mode_buffer_len,
/* sense_len */ SSD_FULL_SIZE,
/* timeout */ CH_TIMEOUT_MODE_SENSE);
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
error = cam_periph_runccb(ccb, cherror, /*cam_flags*/ CAM_RETRY_SELTO,
/* sense_flags */ SF_RETRY_UA | SF_NO_PRINT,
&softc->device_stats);
if (error) {
if (dbd) {
struct scsi_mode_sense_6 *sms;
sms = (struct scsi_mode_sense_6 *)
ccb->csio.cdb_io.cdb_bytes;
sms->byte2 &= ~SMS_DBD;
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
error = cam_periph_runccb(ccb, cherror,
/*cam_flags*/ CAM_RETRY_SELTO,
/*sense_flags*/ SF_RETRY_UA,
&softc->device_stats);
} else {
/*
* Since we disabled sense printing above, print
* out the sense here since we got an error.
*/
scsi_sense_print(&ccb->csio);
}
if (error) {
xpt_print_path(periph->path);
printf("chgetparams: error getting device "
"capabilities page\n");
xpt_release_ccb(ccb);
free(mode_buffer, M_TEMP);
return(error);
}
}
xpt_release_ccb(ccb);
cap = (struct page_device_capabilities *)
find_mode_page_6((struct scsi_mode_header_6 *)mode_buffer);
bzero(softc->sc_movemask, sizeof(softc->sc_movemask));
bzero(softc->sc_exchangemask, sizeof(softc->sc_exchangemask));
moves = &cap->move_from_mt;
exchanges = &cap->exchange_with_mt;
for (from = CHET_MT; from <= CHET_DT; ++from) {
softc->sc_movemask[from] = moves[from];
softc->sc_exchangemask[from] = exchanges[from];
}
free(mode_buffer, M_TEMP);
return(error);
}
void
scsi_move_medium(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, u_int32_t tea, u_int32_t src,
u_int32_t dst, int invert, u_int8_t sense_len,
u_int32_t timeout)
{
struct scsi_move_medium *scsi_cmd;
scsi_cmd = (struct scsi_move_medium *)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = MOVE_MEDIUM;
scsi_ulto2b(tea, scsi_cmd->tea);
scsi_ulto2b(src, scsi_cmd->src);
scsi_ulto2b(dst, scsi_cmd->dst);
if (invert)
scsi_cmd->invert |= MOVE_MEDIUM_INVERT;
cam_fill_csio(csio,
retries,
cbfcnp,
/*flags*/ CAM_DIR_NONE,
tag_action,
/*data_ptr*/ NULL,
/*dxfer_len*/ 0,
sense_len,
sizeof(*scsi_cmd),
timeout);
}
void
scsi_exchange_medium(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, u_int32_t tea, u_int32_t src,
u_int32_t dst1, u_int32_t dst2, int invert1,
int invert2, u_int8_t sense_len, u_int32_t timeout)
{
struct scsi_exchange_medium *scsi_cmd;
scsi_cmd = (struct scsi_exchange_medium *)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = EXCHANGE_MEDIUM;
scsi_ulto2b(tea, scsi_cmd->tea);
scsi_ulto2b(src, scsi_cmd->src);
scsi_ulto2b(dst1, scsi_cmd->fdst);
scsi_ulto2b(dst2, scsi_cmd->sdst);
if (invert1)
scsi_cmd->invert |= EXCHANGE_MEDIUM_INV1;
if (invert2)
scsi_cmd->invert |= EXCHANGE_MEDIUM_INV2;
cam_fill_csio(csio,
retries,
cbfcnp,
/*flags*/ CAM_DIR_NONE,
tag_action,
/*data_ptr*/ NULL,
/*dxfer_len*/ 0,
sense_len,
sizeof(*scsi_cmd),
timeout);
}
void
scsi_position_to_element(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, u_int32_t tea, u_int32_t dst,
int invert, u_int8_t sense_len, u_int32_t timeout)
{
struct scsi_position_to_element *scsi_cmd;
scsi_cmd = (struct scsi_position_to_element *)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = POSITION_TO_ELEMENT;
scsi_ulto2b(tea, scsi_cmd->tea);
scsi_ulto2b(dst, scsi_cmd->dst);
if (invert)
scsi_cmd->invert |= POSITION_TO_ELEMENT_INVERT;
cam_fill_csio(csio,
retries,
cbfcnp,
/*flags*/ CAM_DIR_NONE,
tag_action,
/*data_ptr*/ NULL,
/*dxfer_len*/ 0,
sense_len,
sizeof(*scsi_cmd),
timeout);
}
void
scsi_read_element_status(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, int voltag, u_int32_t sea,
u_int32_t count, u_int8_t *data_ptr,
u_int32_t dxfer_len, u_int8_t sense_len,
u_int32_t timeout)
{
struct scsi_read_element_status *scsi_cmd;
scsi_cmd = (struct scsi_read_element_status *)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = READ_ELEMENT_STATUS;
scsi_ulto2b(sea, scsi_cmd->sea);
scsi_ulto2b(count, scsi_cmd->count);
scsi_ulto3b(dxfer_len, scsi_cmd->len);
if (voltag)
scsi_cmd->byte2 |= READ_ELEMENT_STATUS_VOLTAG;
cam_fill_csio(csio,
retries,
cbfcnp,
/*flags*/ CAM_DIR_IN,
tag_action,
data_ptr,
dxfer_len,
sense_len,
sizeof(*scsi_cmd),
timeout);
}
void
scsi_initialize_element_status(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, u_int8_t sense_len,
u_int32_t timeout)
{
struct scsi_initialize_element_status *scsi_cmd;
scsi_cmd = (struct scsi_initialize_element_status *)
&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = INITIALIZE_ELEMENT_STATUS;
cam_fill_csio(csio,
retries,
cbfcnp,
/*flags*/ CAM_DIR_NONE,
tag_action,
/* data_ptr */ NULL,
/* dxfer_len */ 0,
sense_len,
sizeof(*scsi_cmd),
timeout);
}
void
scsi_send_volume_tag(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action,
u_int16_t element_address,
u_int8_t send_action_code,
struct scsi_send_volume_tag_parameters *parameters,
u_int8_t sense_len, u_int32_t timeout)
{
struct scsi_send_volume_tag *scsi_cmd;
scsi_cmd = (struct scsi_send_volume_tag *) &csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = SEND_VOLUME_TAG;
scsi_ulto2b(element_address, scsi_cmd->ea);
scsi_cmd->sac = send_action_code;
scsi_ulto2b(sizeof(*parameters), scsi_cmd->pll);
cam_fill_csio(csio,
retries,
cbfcnp,
/*flags*/ CAM_DIR_OUT,
tag_action,
/* data_ptr */ (u_int8_t *) parameters,
sizeof(*parameters),
sense_len,
sizeof(*scsi_cmd),
timeout);
}