d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
6b7c15e580
freebsd-dev/sys/ufs/ffs/ffs_extern.h

180 lines
7.4 KiB
C
Raw Normal View History

BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*-
* Copyright (c) 1991, 1993, 1994
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
* @(#)ffs_extern.h 8.6 (Berkeley) 3/30/95
$Id$ -> $FreeBSD$
1999-08-28 01:08:13 +00:00
* $FreeBSD$
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
Removed bogus _BEGIN_DECLS/_END_DECLS. Removed unused struct tag declarations in cloned code. Added or cleaned up idempotency ifdefs.
1996-05-01 02:16:17 +00:00
#ifndef _UFS_FFS_EXTERN_H
#define _UFS_FFS_EXTERN_H
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
struct buf;
Forward declare struct cg to quiet a warning. Submitted by: bde
2001-05-30 23:08:40 +00:00
struct cg;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct fid;
struct fs;
struct inode;
Forward declare some structs so that this file is more self-sufficient.
1998-02-03 21:52:02 +00:00
struct malloc_type;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct mount;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct thread;
Fix all areas of the system (or at least all those in LINT) to avoid storing socket addresses in mbufs. (Socket buffers are the one exception.) A number of kernel APIs needed to get fixed in order to make this happen. Also, fix three protocol families which kept PCBs in mbufs to not malloc them instead. Delete some old compatibility cruft while we're at it, and add some new routines in the in_cksum family.
1997-08-16 19:16:27 +00:00
struct sockaddr;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct statfs;
Forward declare some structs so that this file is more self-sufficient.
1998-02-03 21:52:02 +00:00
struct ucred;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct vnode;
Forward declare even more structs to restore some self-sufficiency. Didn't fix new dependence on <ufs/ufs/inode.h> and its prerequisites.
1998-03-23 14:12:37 +00:00
struct vop_fsync_args;
Forward declare some structs so that this file is more self-sufficient.
1998-02-03 21:52:02 +00:00
struct vop_reallocblks_args;
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
struct workhead;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Following a fair amount of real world experience with ACLs and extended attributes since FreeBSD 5, make the following semantic changes: - Don't update the inode modification time (mtime) when extended attributes (and hence also ACLs) are added, modified, or removed. - Don't update the inode access tie (atime) when extended attributes (and hence also ACLs) are queried. This means that rsync (and related tools) won't improperly think that the data in the file has changed when only the ACL has changed. Note that ffs_reallocblks() has not been changed to not update on an IO_EXT transaction, but currently EAs don't use the cluster write routines so this shouldn't be a problem. If EAs grow support for clustering, then VOP_REALLOCBLKS() will need to grow a flag argument to carry down IO_EXT to UFS. MFC after: 1 week PR: ports/125739 Reported by: Alexander Zagrebin <alexz@visp.ru> Tested by: pluknet <pluknet@gmail.com>, Greg Byshenk <freebsd@byshenk.net> Discussed with: kib, kientzle, timur, Alexander Bokovoy <ab@samba.org>
2009-01-27 21:48:47 +00:00
int ffs_alloc(struct inode *, ufs2_daddr_t, ufs2_daddr_t, int, int,
struct ucred *, ufs2_daddr_t *);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
int ffs_balloc_ufs1(struct vnode *a_vp, off_t a_startoffset, int a_size,
struct ucred *a_cred, int a_flags, struct buf **a_bpp);
int ffs_balloc_ufs2(struct vnode *a_vp, off_t a_startoffset, int a_size,
Remove __P.
2002-03-19 22:40:48 +00:00
struct ucred *a_cred, int a_flags, struct buf **a_bpp);
int ffs_blkatoff(struct vnode *, off_t, char **, struct buf **);
- Change some function parameters so that the ufsmount structure is accessable in places where the ufs lock will be needed. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:02:11 +00:00
void ffs_blkfree(struct ufsmount *, struct fs *, struct vnode *,
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
ufs2_daddr_t, long, ino_t, struct workhead *);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t ffs_blkpref_ufs1(struct inode *, ufs_lbn_t, int, ufs1_daddr_t *);
ufs2_daddr_t ffs_blkpref_ufs2(struct inode *, ufs_lbn_t, int, ufs2_daddr_t *);
This patch fixes a bug on an active filesystem on which a snapshot is being taken from panicing with either "freeing free block" or "freeing free inode". The problem arises when the snapshot code is scanning the filesystem looking for inodes with a reference count of zero (e.g., unlinked but still open) so that it can expunge them from its view. If it encounters a reclaimed vnode and has to restart its scan, then it will panic if it encounters and tries to free an inode that it has already processed. The fix is to check each candidate inode to see if it has already been processed before trying to delete it from the snapshot image. Sponsored by: DARPA & NAI Labs.
2003-02-22 00:29:51 +00:00
int ffs_checkfreefile(struct fs *, struct vnode *, ino_t);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
void ffs_clrblock(struct fs *, u_char *, ufs1_daddr_t);
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
void ffs_clusteracct(struct fs *, struct cg *, ufs1_daddr_t, int);
Cylinder group bitmaps and blocks containing inode for a snapshot file are after snaplock, while other ffs device buffers are before snaplock in global lock order. By itself, this could cause deadlock when bdwrite() tries to flush dirty buffers on snapshotted ffs. If, during the flush, COW activity for snapshot needs to allocate block and ffs_alloccg() selects the cylinder group that is being written by bdwrite(), then kernel would panic due to recursive buffer lock acquision. Avoid dealing with buffers in bdwrite() that are from other side of snaplock divisor in the lock order then the buffer being written. Add new BOP, bop_bdwrite(), to do dirty buffer flushing for same vnode in the bdwrite(). Default implementation, bufbdflush(), refactors the code from bdwrite(). For ffs device buffers, specialized implementation is used. Reviewed by: tegge, jeff, Russell Cattelan (cattelan xfs org, xfs changes) Tested by: Peter Holm X-MFC after: 3 weeks (if ever: it changes ABI)
2007-01-23 10:01:19 +00:00
void ffs_bdflush(struct bufobj *, struct buf *);
Degeneralize the per cdev copyonwrite callback. The only possible value is ffs_copyonwrite() and the only place it can be called from is FFS which would never want to call another filesystems copyonwrite method, should one exist, so there is no reason why anything generic should know about this.
2004-10-26 06:25:56 +00:00
int ffs_copyonwrite(struct vnode *, struct buf *);
Remove __P.
2002-03-19 22:40:48 +00:00
int ffs_flushfiles(struct mount *, int, struct thread *);
void ffs_fragacct(struct fs *, int, int32_t [], int);
- Change some function parameters so that the ufsmount structure is accessable in places where the ufs lock will be needed. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:02:11 +00:00
int ffs_freefile(struct ufsmount *, struct fs *, struct vnode *, ino_t,
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
int, struct workhead *);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
int ffs_isblock(struct fs *, u_char *, ufs1_daddr_t);
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
int ffs_isfreeblock(struct fs *, u_char *, ufs1_daddr_t);
Move the allocation of the inode contents into ffs_vfsops.c rather than passing malloc types around.
2002-12-27 10:23:03 +00:00
void ffs_load_inode(struct buf *, struct inode *, struct fs *, ino_t);
Remove __P.
2002-03-19 22:40:48 +00:00
int ffs_mountroot(void);
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
void ffs_oldfscompat_write(struct fs *, struct ufsmount *);
Implement fully asynchronous partial truncation with softupdates journaling to resolve errors which can cause corruption on recovery with the old synchronous mechanism. - Append partial truncation freework structures to indirdeps while truncation is proceeding. These prevent new block pointers from becoming valid until truncation completes and serialize truncations. - On completion of a partial truncate journal work waits for zeroed pointers to hit indirects. - softdep_journal_freeblocks() handles last frag allocation and last block zeroing. - vtruncbuf/ffs_page_remove moved into softdep_*_freeblocks() so it is only implemented in one place. - Block allocation failure handling moved up one level so it does not proceed with buf locks held. This permits us to do more extensive reclaims when filesystem space is exhausted. - softdep_sync_metadata() is broken into two parts, the first executes once at the start of ffs_syncvnode() and flushes truncations and inode dependencies. The second is called on each locked buf. This eliminates excessive looping and rollbacks. - Improve the mechanism in process_worklist_item() that handles acquiring vnode locks for handle_workitem_remove() so that it works more generally and does not loop excessively over the same worklist items on each call. - Don't corrupt directories by zeroing the tail in fsck. This is only done for regular files. - Push a fsync complete record for files that need it so the checker knows a truncation in the journal is no longer valid. Discussed with: mckusick, kib (ffs_pages_remove and ffs_truncate parts) Tested by: pho
2011-06-10 22:48:35 +00:00
void ffs_pages_remove(struct vnode *vp, vm_pindex_t start, vm_pindex_t end);
Remove __P.
2002-03-19 22:40:48 +00:00
int ffs_reallocblks(struct vop_reallocblks_args *);
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
int ffs_realloccg(struct inode *, ufs2_daddr_t, ufs2_daddr_t,
Following a fair amount of real world experience with ACLs and extended attributes since FreeBSD 5, make the following semantic changes: - Don't update the inode modification time (mtime) when extended attributes (and hence also ACLs) are added, modified, or removed. - Don't update the inode access tie (atime) when extended attributes (and hence also ACLs) are queried. This means that rsync (and related tools) won't improperly think that the data in the file has changed when only the ACL has changed. Note that ffs_reallocblks() has not been changed to not update on an IO_EXT transaction, but currently EAs don't use the cluster write routines so this shouldn't be a problem. If EAs grow support for clustering, then VOP_REALLOCBLKS() will need to grow a flag argument to carry down IO_EXT to UFS. MFC after: 1 week PR: ports/125739 Reported by: Alexander Zagrebin <alexz@visp.ru> Tested by: pluknet <pluknet@gmail.com>, Greg Byshenk <freebsd@byshenk.net> Discussed with: kib, kientzle, timur, Alexander Bokovoy <ab@samba.org>
2009-01-27 21:48:47 +00:00
ufs2_daddr_t, int, int, int, struct ucred *, struct buf **);
Add gjournal specific code to the UFS file system: - Add FS_GJOURNAL flag which enables gjournal support on a file system. - Add cg_unrefs field to the cylinder group structure which holds number of unreferenced (orphaned) inodes in the given cylinder group. - Add fs_unrefs field to the super block structure which holds total number of unreferenced (orphaned) inodes. - When file or a directory is orphaned (last reference is removed, but object is still open), increase fs_unrefs and cg_unrefs fields, which is a hint for fsck in which cylinder groups looks for such (orphaned) objects. - When file is last closed, decrease {fs,cg}_unrefs fields. - Add VV_DELETED vnode flag which points at orphaned objects. Sponsored by: home.pl
2006-10-31 21:48:54 +00:00
int ffs_sbupdate(struct ufsmount *, int, int);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
void ffs_setblock(struct fs *, u_char *, ufs1_daddr_t);
Update to soft updates journaling to properly track freed blocks that get claimed by snapshots. Submitted by: Jeff Roberson Tested by: Peter Holm
2011-06-12 19:27:05 +00:00
int ffs_snapblkfree(struct fs *, struct vnode *, ufs2_daddr_t, long, ino_t,
struct workhead *);
Remove __P.
2002-03-19 22:40:48 +00:00
void ffs_snapremove(struct vnode *vp);
int ffs_snapshot(struct mount *mp, char *snapfile);
void ffs_snapshot_mount(struct mount *mp);
void ffs_snapshot_unmount(struct mount *mp);
When attempt is made to suspend a filesystem that is already syspended, wait until the current suspension is lifted instead of silently returning success immediately. The consequences of calling vfs_write() resume when not owning the suspension are not well-defined at best. Add the vfs_susp_clean() mount method to be called from vfs_write_resume(). Set it to process_deferred_inactive() for ffs, and stop calling it manually. Add the thread flag TDP_IGNSUSP that allows to bypass the suspension point in the vn_start_write. It is intended for use by VFS in the situations where the suspender want to do some i/o requiring calls to vn_start_write(), and this i/o cannot be done later. Reviewed by: tegge In collaboration with: pho MFC after: 1 month
2008-09-16 11:51:06 +00:00
void process_deferred_inactive(struct mount *mp);
Update to soft updates journaling to properly track freed blocks that get claimed by snapshots. Submitted by: Jeff Roberson Tested by: Peter Holm
2011-06-12 19:27:05 +00:00
void ffs_sync_snap(struct mount *, int);
For snapshots we need all VOP_LOCKs to be exclusive. The "business class upgrade" was implemented in UFS's VOP_LOCK implementation ufs_lock() which is the wrong layer, so move it to ffs_lock(). Also, as long as we have not abandonned advanced vfs-stacking we should not preclude it from happening: instead of implementing a copy locally, use the VOP_LOCK_APV(&ufs) to correctly arrive at vop_stdlock() at the bottom.
2005-02-08 16:25:50 +00:00
int ffs_syncvnode(struct vnode *vp, int waitfor);
Remove __P.
2002-03-19 22:40:48 +00:00
int ffs_truncate(struct vnode *, off_t, int, struct ucred *, struct thread *);
int ffs_update(struct vnode *, int);
int ffs_valloc(struct vnode *, int, struct ucred *, struct vnode **);
VFS mega cleanup commit (x/N) 1. Add new file "sys/kern/vfs_default.c" where default actions for VOPs go. Implement proper defaults for ABORTOP, BWRITE, LEASE, POLL, REVOKE and STRATEGY. Various stuff spread over the entire tree belongs here. 2. Change VOP_BLKATOFF to a normal function in cd9660. 3. Kill VOP_BLKATOFF, VOP_TRUNCATE, VOP_VFREE, VOP_VALLOC. These are private interface functions between UFS and the underlying storage manager layer (FFS/LFS/MFS/EXT2FS). The functions now live in struct ufsmount instead. 4. Remove a kludge of VOP_ functions in all filesystems, that did nothing but obscure the simplicity and break the expandability. If a filesystem doesn't implement VOP_FOO, it shouldn't have an entry for it in its vnops table. The system will try to DTRT if it is not implemented. There are still some cruft left, but the bulk of it is done. 5. Fix another VCALL in vfs_cache.c (thanks Bruce!)
1997-10-16 10:50:27 +00:00
Remove __P.
2002-03-19 22:40:48 +00:00
int ffs_vfree(struct vnode *, ino_t, int);
Introduce typedefs for the member functions of struct vfsops and employ these in the main filesystems. This does not change the resulting code but makes the source a little bit more grepable. Sponsored by: DARPA and NAI Labs.
2002-08-13 10:05:50 +00:00
vfs_vget_t ffs_vget;
Softdep code may need to instantiate vnode when processing dependencies. In particular, it may need this while syncing filesystem being unmounted. Since during unmount MNTK_NOINSMNTQUE flag is set, that could sometimes disallow insertion of the vnode into the vnode mount list, softdep code needs to overwrite the MNTK_NOINSMNTQUE flag. Create the ffs_vgetf() function that sets the VV_FORCEINSMQ flag for new vnode and use it consistently from the softdep code instead of ffs_vget(). Add the retry logic to the softdep_flushfiles() to flush the vnodes that could be instantiated while flushing softdep dependencies. Tested by: pho, kris Reviewed by: tegge MFC after: 1 month
2008-08-28 09:18:20 +00:00
int ffs_vgetf(struct mount *, ino_t, int, struct vnode **, int);
#define FFSV_FORCEINSMQ 0x0001
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Split the vop_vector for ffs1 and ffs2, this is mostly for the different EXTATTR support.
2005-02-08 21:03:52 +00:00
extern struct vop_vector ffs_vnodeops1;
extern struct vop_vector ffs_fifoops1;
extern struct vop_vector ffs_vnodeops2;
extern struct vop_vector ffs_fifoops2;
Removed bogus _BEGIN_DECLS/_END_DECLS. Removed unused struct tag declarations in cloned code. Added or cleaned up idempotency ifdefs.
1996-05-01 02:16:17 +00:00
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
/*
* Soft update function prototypes.
*/
Use vn_start_secondary_write() and vn_finished_secondary_write() as a replacement for vn_write_suspend_wait() to better account for secondary write processing. Close race where secondary writes could be started after ffs_sync() returned but before the file system was marked as suspended. Detect if secondary writes or softdep processing occurred during vnode sync loop in ffs_sync() and retry the loop if needed.
2006-03-08 23:43:39 +00:00
int softdep_check_suspend(struct mount *, struct vnode *,
int, int, int, int);
void softdep_get_depcounts(struct mount *, int *, int *);
Remove __P.
2002-03-19 22:40:48 +00:00
void softdep_initialize(void);
Add the ffs bits necessary to support unloading of the ufs kernel module. This adds an ffs_uninit() function that calls ufs_uninit() and also calls a new softdep_uninitialize() function. Add a stub for softdep_uninitialize() to cover the non-SOFTUPDATES case. Reviewed by: mckusick
2002-07-01 11:00:47 +00:00
void softdep_uninitialize(void);
Remove __P.
2002-03-19 22:40:48 +00:00
int softdep_mount(struct vnode *, struct mount *, struct fs *,
struct ucred *);
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
void softdep_unmount(struct mount *);
int softdep_move_dependencies(struct buf *, struct buf *);
Remove __P.
2002-03-19 22:40:48 +00:00
int softdep_flushworklist(struct mount *, int *, struct thread *);
int softdep_flushfiles(struct mount *, int, struct thread *);
void softdep_update_inodeblock(struct inode *, struct buf *, int);
void softdep_load_inodeblock(struct inode *);
void softdep_freefile(struct vnode *, ino_t, int);
Be far more persistent in reclaiming blocks and inodes before giving up and declaring a filesystem out of space. Especially necessary when running on a small filesystem. With this improvement, it should be possible to use soft updates on a small root filesystem. Kudos to: Peter Holm Testing by: Peter Holm MFC: 2 weeks
2011-04-05 21:26:05 +00:00
int softdep_request_cleanup(struct fs *, struct vnode *,
struct ucred *, int);
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
void softdep_setup_freeblocks(struct inode *, off_t, int);
Remove __P.
2002-03-19 22:40:48 +00:00
void softdep_setup_inomapdep(struct buf *, struct inode *, ino_t);
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
void softdep_setup_blkmapdep(struct buf *, struct mount *, ufs2_daddr_t,
int, int);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
void softdep_setup_allocdirect(struct inode *, ufs_lbn_t, ufs2_daddr_t,
ufs2_daddr_t, long, long, struct buf *);
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
void softdep_setup_allocext(struct inode *, ufs_lbn_t, ufs2_daddr_t,
ufs2_daddr_t, long, long, struct buf *);
Remove __P.
2002-03-19 22:40:48 +00:00
void softdep_setup_allocindir_meta(struct buf *, struct inode *,
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
struct buf *, int, ufs2_daddr_t);
Remove __P.
2002-03-19 22:40:48 +00:00
void softdep_setup_allocindir_page(struct inode *, ufs_lbn_t,
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
struct buf *, int, ufs2_daddr_t, ufs2_daddr_t, struct buf *);
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
void softdep_setup_blkfree(struct mount *, struct buf *, ufs2_daddr_t, int,
struct workhead *);
void softdep_setup_inofree(struct mount *, struct buf *, ino_t,
struct workhead *);
void softdep_setup_sbupdate(struct ufsmount *, struct fs *, struct buf *);
Remove __P.
2002-03-19 22:40:48 +00:00
void softdep_fsync_mountdev(struct vnode *);
For snapshots we need all VOP_LOCKs to be exclusive. The "business class upgrade" was implemented in UFS's VOP_LOCK implementation ufs_lock() which is the wrong layer, so move it to ffs_lock(). Also, as long as we have not abandonned advanced vfs-stacking we should not preclude it from happening: instead of implementing a copy locally, use the VOP_LOCK_APV(&ufs) to correctly arrive at vop_stdlock() at the bottom.
2005-02-08 16:25:50 +00:00
int softdep_sync_metadata(struct vnode *);
Implement fully asynchronous partial truncation with softupdates journaling to resolve errors which can cause corruption on recovery with the old synchronous mechanism. - Append partial truncation freework structures to indirdeps while truncation is proceeding. These prevent new block pointers from becoming valid until truncation completes and serialize truncations. - On completion of a partial truncate journal work waits for zeroed pointers to hit indirects. - softdep_journal_freeblocks() handles last frag allocation and last block zeroing. - vtruncbuf/ffs_page_remove moved into softdep_*_freeblocks() so it is only implemented in one place. - Block allocation failure handling moved up one level so it does not proceed with buf locks held. This permits us to do more extensive reclaims when filesystem space is exhausted. - softdep_sync_metadata() is broken into two parts, the first executes once at the start of ffs_syncvnode() and flushes truncations and inode dependencies. The second is called on each locked buf. This eliminates excessive looping and rollbacks. - Improve the mechanism in process_worklist_item() that handles acquiring vnode locks for handle_workitem_remove() so that it works more generally and does not loop excessively over the same worklist items on each call. - Don't corrupt directories by zeroing the tail in fsck. This is only done for regular files. - Push a fsync complete record for files that need it so the checker knows a truncation in the journal is no longer valid. Discussed with: mckusick, kib (ffs_pages_remove and ffs_truncate parts) Tested by: pho
2011-06-10 22:48:35 +00:00
int softdep_sync_buf(struct vnode *, struct buf *, int);
- Move softdep from using a global worklist to per-mount worklists. This has many positive effects including improved smp locking, reducing interdependencies between mounts that can lead to deadlocks, etc. - Add the softdep worklist and various counters to the ufsmnt structure. - Add a mount pointer to the workitem and remove mount pointers from the various structures derived from the workitem as they are now redundant. - Remove the poor-man's semaphore protecting softdep_process_worklist and softdep_flushworklist. Several threads may now process the list simultaneously. - Add softdep_waitidle() to block the thread until all pending dependencies being operated on by other threads have been flushed. - Use softdep_waitidle() in unmount and snapshots to block either operation until the fs is stable. - Remove softdep worklist processing from the syncer and move it into the softdep_flush() thread. This thread processes all softdep mounts once each second and when it is called via the new softdep_speedup() when there is a resource shortage. This removes the softdep hook from the kernel and various hacks in header files to support it. Reviewed by/Discussed with: tegge, truckman, mckusick Tested by: kris
2006-03-02 05:50:23 +00:00
int softdep_process_worklist(struct mount *, int);
int softdep_fsync(struct vnode *);
int softdep_waitidle(struct mount *);
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
int softdep_prealloc(struct vnode *, int);
int softdep_journal_lookup(struct mount *, struct vnode **);
Implement fully asynchronous partial truncation with softupdates journaling to resolve errors which can cause corruption on recovery with the old synchronous mechanism. - Append partial truncation freework structures to indirdeps while truncation is proceeding. These prevent new block pointers from becoming valid until truncation completes and serialize truncations. - On completion of a partial truncate journal work waits for zeroed pointers to hit indirects. - softdep_journal_freeblocks() handles last frag allocation and last block zeroing. - vtruncbuf/ffs_page_remove moved into softdep_*_freeblocks() so it is only implemented in one place. - Block allocation failure handling moved up one level so it does not proceed with buf locks held. This permits us to do more extensive reclaims when filesystem space is exhausted. - softdep_sync_metadata() is broken into two parts, the first executes once at the start of ffs_syncvnode() and flushes truncations and inode dependencies. The second is called on each locked buf. This eliminates excessive looping and rollbacks. - Improve the mechanism in process_worklist_item() that handles acquiring vnode locks for handle_workitem_remove() so that it works more generally and does not loop excessively over the same worklist items on each call. - Don't corrupt directories by zeroing the tail in fsck. This is only done for regular files. - Push a fsync complete record for files that need it so the checker knows a truncation in the journal is no longer valid. Discussed with: mckusick, kib (ffs_pages_remove and ffs_truncate parts) Tested by: pho
2011-06-10 22:48:35 +00:00
void softdep_journal_freeblocks(struct inode *, struct ucred *, off_t, int);
void softdep_journal_fsync(struct inode *);
Update to soft updates journaling to properly track freed blocks that get claimed by snapshots. Submitted by: Jeff Roberson Tested by: Peter Holm
2011-06-12 19:27:05 +00:00
void softdep_buf_append(struct buf *, struct workhead *);
void softdep_inode_append(struct inode *, struct ucred *, struct workhead *);
void softdep_freework(struct workhead *);
Implement fully asynchronous partial truncation with softupdates journaling to resolve errors which can cause corruption on recovery with the old synchronous mechanism. - Append partial truncation freework structures to indirdeps while truncation is proceeding. These prevent new block pointers from becoming valid until truncation completes and serialize truncations. - On completion of a partial truncate journal work waits for zeroed pointers to hit indirects. - softdep_journal_freeblocks() handles last frag allocation and last block zeroing. - vtruncbuf/ffs_page_remove moved into softdep_*_freeblocks() so it is only implemented in one place. - Block allocation failure handling moved up one level so it does not proceed with buf locks held. This permits us to do more extensive reclaims when filesystem space is exhausted. - softdep_sync_metadata() is broken into two parts, the first executes once at the start of ffs_syncvnode() and flushes truncations and inode dependencies. The second is called on each locked buf. This eliminates excessive looping and rollbacks. - Improve the mechanism in process_worklist_item() that handles acquiring vnode locks for handle_workitem_remove() so that it works more generally and does not loop excessively over the same worklist items on each call. - Don't corrupt directories by zeroing the tail in fsck. This is only done for regular files. - Push a fsync complete record for files that need it so the checker knows a truncation in the journal is no longer valid. Discussed with: mckusick, kib (ffs_pages_remove and ffs_truncate parts) Tested by: pho
2011-06-10 22:48:35 +00:00
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
Add retry code analogous to the block allocation retry code to avoid running out of inodes. Reported by: Peter Holm
2011-03-23 05:13:54 +00:00
/*
* Things to request flushing in softdep_request_cleanup()
*/
#define FLUSH_INODES 1
#define FLUSH_INODES_WAIT 2
#define FLUSH_BLOCKS 3
#define FLUSH_BLOCKS_WAIT 4
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
When downgrading the read-write mount to read-only, do_unmount() sets MNT_RDONLY flag before the VFS_MOUNT() is called. In ufs_inactive() and ufs_itimes_locked(), UFS verifies whether the fs is read-only by checking MNT_RDONLY, but this may cause loss of the IN_MODIFIED flag for inode on the fs being remounted rw->ro. Introduce UFS_RDONLY() struct ufsmount' method that reports the value of the fs_ronly. The later is set to 1 only after the remount is finished. Reviewed by: tegge In collaboration with: pho MFC after: 1 month
2008-09-16 10:59:35 +00:00
int ffs_rdonly(struct inode *);
Update to soft updates journaling to properly track freed blocks that get claimed by snapshots. Submitted by: Jeff Roberson Tested by: Peter Holm
2011-06-12 19:27:05 +00:00
TAILQ_HEAD(snaphead, inode);
struct snapdata {
LIST_ENTRY(snapdata) sn_link;
struct snaphead sn_head;
daddr_t sn_listsize;
daddr_t *sn_blklist;
struct lock sn_lock;
};
Removed bogus _BEGIN_DECLS/_END_DECLS. Removed unused struct tag declarations in cloned code. Added or cleaned up idempotency ifdefs.
1996-05-01 02:16:17 +00:00
#endif /* !_UFS_FFS_EXTERN_H */
Reference in New Issue Copy Permalink