freebsd-dev/sys/x86/iommu/intel_drv.c

1312 lines
34 KiB
C
Raw Normal View History

Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
/*-
Use VT-d interrupt remapping block (IR) to perform FSB messages translation. In particular, despite IO-APICs only take 8bit apic id, IR translation structures accept 32bit APIC Id, which allows x2APIC mode to function properly. Extend msi_cpu of struct msi_intrsrc and io_cpu of ioapic_intsrc to full int from one byte. KPI of IR is isolated into the x86/iommu/iommu_intrmap.h, to avoid bringing all dmar headers into interrupt code. The non-PCI(e) devices which generate message interrupts on FSB require special handling. The HPET FSB interrupts are remapped, while DMAR interrupts are not. For each msi and ioapic interrupt source, the iommu cookie is added, which is in fact index of the IRE (interrupt remap entry) in the IR table. Cookie is made at the source allocation time, and then used at the map time to fill both IRE and device registers. The MSI address/data registers and IO-APIC redirection registers are programmed with the special values which are recognized by IR and used to restore the IRE index, to find proper delivery mode and target. Map all MSI interrupts in the block when msi_map() is called. Since an interrupt source setup and dismantle code are done in the non-sleepable context, flushing interrupt entries cache in the IR hardware, which is done async and ideally waits for the interrupt, requires busy-wait for queue to drain. The dmar_qi_wait_for_seq() is modified to take a boolean argument requesting busy-wait for the written sequence number instead of waiting for interrupt. Some interrupts are configured before IR is initialized, e.g. ACPI SCI. Add intr_reprogram() function to reprogram all already configured interrupts, and call it immediately before an IR unit is enabled. There is still a small window after the IO-APIC redirection entry is reprogrammed with cookie but before the unit is enabled, but to fix this properly, IR must be started much earlier. Add workarounds for 5500 and X58 northbridges, some revisions of which have severe flaws in handling IR. Use the same identification methods as employed by Linux. Review: https://reviews.freebsd.org/D1892 Reviewed by: neel Discussed with: jhb Tested by: glebius, pho (previous versions) Sponsored by: The FreeBSD Foundation MFC after: 3 weeks
2015-03-19 13:57:47 +00:00
* Copyright (c) 2013-2015 The FreeBSD Foundation
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
* All rights reserved.
*
* This software was developed by Konstantin Belousov <kib@FreeBSD.org>
* under sponsorship from the FreeBSD Foundation.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_acpi.h"
#if defined(__amd64__)
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
#define DEV_APIC
#else
#include "opt_apic.h"
#endif
#include "opt_ddb.h"
#include <sys/param.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/memdesc.h>
#include <sys/module.h>
#include <sys/rman.h>
#include <sys/rwlock.h>
#include <sys/smp.h>
#include <sys/taskqueue.h>
#include <sys/tree.h>
Use VT-d interrupt remapping block (IR) to perform FSB messages translation. In particular, despite IO-APICs only take 8bit apic id, IR translation structures accept 32bit APIC Id, which allows x2APIC mode to function properly. Extend msi_cpu of struct msi_intrsrc and io_cpu of ioapic_intsrc to full int from one byte. KPI of IR is isolated into the x86/iommu/iommu_intrmap.h, to avoid bringing all dmar headers into interrupt code. The non-PCI(e) devices which generate message interrupts on FSB require special handling. The HPET FSB interrupts are remapped, while DMAR interrupts are not. For each msi and ioapic interrupt source, the iommu cookie is added, which is in fact index of the IRE (interrupt remap entry) in the IR table. Cookie is made at the source allocation time, and then used at the map time to fill both IRE and device registers. The MSI address/data registers and IO-APIC redirection registers are programmed with the special values which are recognized by IR and used to restore the IRE index, to find proper delivery mode and target. Map all MSI interrupts in the block when msi_map() is called. Since an interrupt source setup and dismantle code are done in the non-sleepable context, flushing interrupt entries cache in the IR hardware, which is done async and ideally waits for the interrupt, requires busy-wait for queue to drain. The dmar_qi_wait_for_seq() is modified to take a boolean argument requesting busy-wait for the written sequence number instead of waiting for interrupt. Some interrupts are configured before IR is initialized, e.g. ACPI SCI. Add intr_reprogram() function to reprogram all already configured interrupts, and call it immediately before an IR unit is enabled. There is still a small window after the IO-APIC redirection entry is reprogrammed with cookie but before the unit is enabled, but to fix this properly, IR must be started much earlier. Add workarounds for 5500 and X58 northbridges, some revisions of which have severe flaws in handling IR. Use the same identification methods as employed by Linux. Review: https://reviews.freebsd.org/D1892 Reviewed by: neel Discussed with: jhb Tested by: glebius, pho (previous versions) Sponsored by: The FreeBSD Foundation MFC after: 3 weeks
2015-03-19 13:57:47 +00:00
#include <sys/vmem.h>
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
#include <machine/bus.h>
#include <contrib/dev/acpica/include/acpi.h>
#include <contrib/dev/acpica/include/accommon.h>
#include <dev/acpica/acpivar.h>
#include <vm/vm.h>
#include <vm/vm_extern.h>
#include <vm/vm_kern.h>
#include <vm/vm_object.h>
#include <vm/vm_page.h>
#include <vm/vm_pager.h>
#include <vm/vm_map.h>
#include <x86/include/busdma_impl.h>
#include <x86/iommu/intel_reg.h>
#include <x86/iommu/busdma_dmar.h>
#include <x86/iommu/intel_dmar.h>
Use VT-d interrupt remapping block (IR) to perform FSB messages translation. In particular, despite IO-APICs only take 8bit apic id, IR translation structures accept 32bit APIC Id, which allows x2APIC mode to function properly. Extend msi_cpu of struct msi_intrsrc and io_cpu of ioapic_intsrc to full int from one byte. KPI of IR is isolated into the x86/iommu/iommu_intrmap.h, to avoid bringing all dmar headers into interrupt code. The non-PCI(e) devices which generate message interrupts on FSB require special handling. The HPET FSB interrupts are remapped, while DMAR interrupts are not. For each msi and ioapic interrupt source, the iommu cookie is added, which is in fact index of the IRE (interrupt remap entry) in the IR table. Cookie is made at the source allocation time, and then used at the map time to fill both IRE and device registers. The MSI address/data registers and IO-APIC redirection registers are programmed with the special values which are recognized by IR and used to restore the IRE index, to find proper delivery mode and target. Map all MSI interrupts in the block when msi_map() is called. Since an interrupt source setup and dismantle code are done in the non-sleepable context, flushing interrupt entries cache in the IR hardware, which is done async and ideally waits for the interrupt, requires busy-wait for queue to drain. The dmar_qi_wait_for_seq() is modified to take a boolean argument requesting busy-wait for the written sequence number instead of waiting for interrupt. Some interrupts are configured before IR is initialized, e.g. ACPI SCI. Add intr_reprogram() function to reprogram all already configured interrupts, and call it immediately before an IR unit is enabled. There is still a small window after the IO-APIC redirection entry is reprogrammed with cookie but before the unit is enabled, but to fix this properly, IR must be started much earlier. Add workarounds for 5500 and X58 northbridges, some revisions of which have severe flaws in handling IR. Use the same identification methods as employed by Linux. Review: https://reviews.freebsd.org/D1892 Reviewed by: neel Discussed with: jhb Tested by: glebius, pho (previous versions) Sponsored by: The FreeBSD Foundation MFC after: 3 weeks
2015-03-19 13:57:47 +00:00
#include <dev/pci/pcireg.h>
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
#include <dev/pci/pcivar.h>
#ifdef DEV_APIC
#include "pcib_if.h"
#include <machine/intr_machdep.h>
#include <x86/apicreg.h>
#include <x86/apicvar.h>
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
#endif
#define DMAR_FAULT_IRQ_RID 0
#define DMAR_QI_IRQ_RID 1
#define DMAR_REG_RID 2
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
static devclass_t dmar_devclass;
static device_t *dmar_devs;
static int dmar_devcnt;
typedef int (*dmar_iter_t)(ACPI_DMAR_HEADER *, void *);
static void
dmar_iterate_tbl(dmar_iter_t iter, void *arg)
{
ACPI_TABLE_DMAR *dmartbl;
ACPI_DMAR_HEADER *dmarh;
char *ptr, *ptrend;
ACPI_STATUS status;
status = AcpiGetTable(ACPI_SIG_DMAR, 1, (ACPI_TABLE_HEADER **)&dmartbl);
if (ACPI_FAILURE(status))
return;
ptr = (char *)dmartbl + sizeof(*dmartbl);
ptrend = (char *)dmartbl + dmartbl->Header.Length;
for (;;) {
if (ptr >= ptrend)
break;
dmarh = (ACPI_DMAR_HEADER *)ptr;
if (dmarh->Length <= 0) {
printf("dmar_identify: corrupted DMAR table, l %d\n",
dmarh->Length);
break;
}
ptr += dmarh->Length;
if (!iter(dmarh, arg))
break;
}
AcpiPutTable((ACPI_TABLE_HEADER *)dmartbl);
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
}
struct find_iter_args {
int i;
ACPI_DMAR_HARDWARE_UNIT *res;
};
static int
dmar_find_iter(ACPI_DMAR_HEADER *dmarh, void *arg)
{
struct find_iter_args *fia;
if (dmarh->Type != ACPI_DMAR_TYPE_HARDWARE_UNIT)
return (1);
fia = arg;
if (fia->i == 0) {
fia->res = (ACPI_DMAR_HARDWARE_UNIT *)dmarh;
return (0);
}
fia->i--;
return (1);
}
static ACPI_DMAR_HARDWARE_UNIT *
dmar_find_by_index(int idx)
{
struct find_iter_args fia;
fia.i = idx;
fia.res = NULL;
dmar_iterate_tbl(dmar_find_iter, &fia);
return (fia.res);
}
static int
dmar_count_iter(ACPI_DMAR_HEADER *dmarh, void *arg)
{
if (dmarh->Type == ACPI_DMAR_TYPE_HARDWARE_UNIT)
dmar_devcnt++;
return (1);
}
static int dmar_enable = 0;
static void
dmar_identify(driver_t *driver, device_t parent)
{
ACPI_TABLE_DMAR *dmartbl;
ACPI_DMAR_HARDWARE_UNIT *dmarh;
ACPI_STATUS status;
int i, error;
if (acpi_disabled("dmar"))
return;
TUNABLE_INT_FETCH("hw.dmar.enable", &dmar_enable);
if (!dmar_enable)
return;
#ifdef INVARIANTS
TUNABLE_INT_FETCH("hw.dmar.check_free", &dmar_check_free);
#endif
TUNABLE_INT_FETCH("hw.dmar.match_verbose", &dmar_match_verbose);
status = AcpiGetTable(ACPI_SIG_DMAR, 1, (ACPI_TABLE_HEADER **)&dmartbl);
if (ACPI_FAILURE(status))
return;
haw = dmartbl->Width + 1;
if ((1ULL << (haw + 1)) > BUS_SPACE_MAXADDR)
dmar_high = BUS_SPACE_MAXADDR;
else
dmar_high = 1ULL << (haw + 1);
if (bootverbose) {
printf("DMAR HAW=%d flags=<%b>\n", dmartbl->Width,
(unsigned)dmartbl->Flags,
"\020\001INTR_REMAP\002X2APIC_OPT_OUT");
}
AcpiPutTable((ACPI_TABLE_HEADER *)dmartbl);
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
dmar_iterate_tbl(dmar_count_iter, NULL);
if (dmar_devcnt == 0)
return;
dmar_devs = malloc(sizeof(device_t) * dmar_devcnt, M_DEVBUF,
M_WAITOK | M_ZERO);
for (i = 0; i < dmar_devcnt; i++) {
dmarh = dmar_find_by_index(i);
if (dmarh == NULL) {
printf("dmar_identify: cannot find HWUNIT %d\n", i);
continue;
}
dmar_devs[i] = BUS_ADD_CHILD(parent, 1, "dmar", i);
if (dmar_devs[i] == NULL) {
printf("dmar_identify: cannot create instance %d\n", i);
continue;
}
error = bus_set_resource(dmar_devs[i], SYS_RES_MEMORY,
DMAR_REG_RID, dmarh->Address, PAGE_SIZE);
if (error != 0) {
printf(
"dmar%d: unable to alloc register window at 0x%08jx: error %d\n",
i, (uintmax_t)dmarh->Address, error);
device_delete_child(parent, dmar_devs[i]);
dmar_devs[i] = NULL;
}
}
}
static int
dmar_probe(device_t dev)
{
if (acpi_get_handle(dev) != NULL)
return (ENXIO);
device_set_desc(dev, "DMA remap");
return (BUS_PROBE_NOWILDCARD);
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
}
static void
dmar_release_intr(device_t dev, struct dmar_unit *unit, int idx)
{
struct dmar_msi_data *dmd;
dmd = &unit->intrs[idx];
if (dmd->irq == -1)
return;
bus_teardown_intr(dev, dmd->irq_res, dmd->intr_handle);
bus_release_resource(dev, SYS_RES_IRQ, dmd->irq_rid, dmd->irq_res);
bus_delete_resource(dev, SYS_RES_IRQ, dmd->irq_rid);
PCIB_RELEASE_MSIX(device_get_parent(device_get_parent(dev)),
dev, dmd->irq);
dmd->irq = -1;
}
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
static void
dmar_release_resources(device_t dev, struct dmar_unit *unit)
{
int i;
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
dmar_fini_busdma(unit);
Use VT-d interrupt remapping block (IR) to perform FSB messages translation. In particular, despite IO-APICs only take 8bit apic id, IR translation structures accept 32bit APIC Id, which allows x2APIC mode to function properly. Extend msi_cpu of struct msi_intrsrc and io_cpu of ioapic_intsrc to full int from one byte. KPI of IR is isolated into the x86/iommu/iommu_intrmap.h, to avoid bringing all dmar headers into interrupt code. The non-PCI(e) devices which generate message interrupts on FSB require special handling. The HPET FSB interrupts are remapped, while DMAR interrupts are not. For each msi and ioapic interrupt source, the iommu cookie is added, which is in fact index of the IRE (interrupt remap entry) in the IR table. Cookie is made at the source allocation time, and then used at the map time to fill both IRE and device registers. The MSI address/data registers and IO-APIC redirection registers are programmed with the special values which are recognized by IR and used to restore the IRE index, to find proper delivery mode and target. Map all MSI interrupts in the block when msi_map() is called. Since an interrupt source setup and dismantle code are done in the non-sleepable context, flushing interrupt entries cache in the IR hardware, which is done async and ideally waits for the interrupt, requires busy-wait for queue to drain. The dmar_qi_wait_for_seq() is modified to take a boolean argument requesting busy-wait for the written sequence number instead of waiting for interrupt. Some interrupts are configured before IR is initialized, e.g. ACPI SCI. Add intr_reprogram() function to reprogram all already configured interrupts, and call it immediately before an IR unit is enabled. There is still a small window after the IO-APIC redirection entry is reprogrammed with cookie but before the unit is enabled, but to fix this properly, IR must be started much earlier. Add workarounds for 5500 and X58 northbridges, some revisions of which have severe flaws in handling IR. Use the same identification methods as employed by Linux. Review: https://reviews.freebsd.org/D1892 Reviewed by: neel Discussed with: jhb Tested by: glebius, pho (previous versions) Sponsored by: The FreeBSD Foundation MFC after: 3 weeks
2015-03-19 13:57:47 +00:00
dmar_fini_irt(unit);
dmar_fini_qi(unit);
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
dmar_fini_fault_log(unit);
for (i = 0; i < DMAR_INTR_TOTAL; i++)
dmar_release_intr(dev, unit, i);
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
if (unit->regs != NULL) {
bus_deactivate_resource(dev, SYS_RES_MEMORY, unit->reg_rid,
unit->regs);
bus_release_resource(dev, SYS_RES_MEMORY, unit->reg_rid,
unit->regs);
unit->regs = NULL;
}
if (unit->domids != NULL) {
delete_unrhdr(unit->domids);
unit->domids = NULL;
}
if (unit->ctx_obj != NULL) {
vm_object_deallocate(unit->ctx_obj);
unit->ctx_obj = NULL;
}
}
static int
dmar_alloc_irq(device_t dev, struct dmar_unit *unit, int idx)
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
{
device_t pcib;
struct dmar_msi_data *dmd;
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
uint64_t msi_addr;
uint32_t msi_data;
int error;
dmd = &unit->intrs[idx];
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
pcib = device_get_parent(device_get_parent(dev)); /* Really not pcib */
error = PCIB_ALLOC_MSIX(pcib, dev, &dmd->irq);
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
if (error != 0) {
device_printf(dev, "cannot allocate %s interrupt, %d\n",
dmd->name, error);
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
goto err1;
}
error = bus_set_resource(dev, SYS_RES_IRQ, dmd->irq_rid,
dmd->irq, 1);
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
if (error != 0) {
device_printf(dev, "cannot set %s interrupt resource, %d\n",
dmd->name, error);
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
goto err2;
}
dmd->irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ,
&dmd->irq_rid, RF_ACTIVE);
if (dmd->irq_res == NULL) {
device_printf(dev,
"cannot allocate resource for %s interrupt\n", dmd->name);
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
error = ENXIO;
goto err3;
}
error = bus_setup_intr(dev, dmd->irq_res, INTR_TYPE_MISC,
dmd->handler, NULL, unit, &dmd->intr_handle);
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
if (error != 0) {
device_printf(dev, "cannot setup %s interrupt, %d\n",
dmd->name, error);
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
goto err4;
}
bus_describe_intr(dev, dmd->irq_res, dmd->intr_handle, "%s", dmd->name);
error = PCIB_MAP_MSI(pcib, dev, dmd->irq, &msi_addr, &msi_data);
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
if (error != 0) {
device_printf(dev, "cannot map %s interrupt, %d\n",
dmd->name, error);
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
goto err5;
}
dmar_write4(unit, dmd->msi_data_reg, msi_data);
dmar_write4(unit, dmd->msi_addr_reg, msi_addr);
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
/* Only for xAPIC mode */
dmar_write4(unit, dmd->msi_uaddr_reg, msi_addr >> 32);
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
return (0);
err5:
bus_teardown_intr(dev, dmd->irq_res, dmd->intr_handle);
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
err4:
bus_release_resource(dev, SYS_RES_IRQ, dmd->irq_rid, dmd->irq_res);
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
err3:
bus_delete_resource(dev, SYS_RES_IRQ, dmd->irq_rid);
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
err2:
PCIB_RELEASE_MSIX(pcib, dev, dmd->irq);
dmd->irq = -1;
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
err1:
return (error);
}
#ifdef DEV_APIC
static int
dmar_remap_intr(device_t dev, device_t child, u_int irq)
{
struct dmar_unit *unit;
struct dmar_msi_data *dmd;
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
uint64_t msi_addr;
uint32_t msi_data;
int i, error;
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
unit = device_get_softc(dev);
for (i = 0; i < DMAR_INTR_TOTAL; i++) {
dmd = &unit->intrs[i];
if (irq == dmd->irq) {
error = PCIB_MAP_MSI(device_get_parent(
device_get_parent(dev)),
dev, irq, &msi_addr, &msi_data);
if (error != 0)
return (error);
DMAR_LOCK(unit);
(dmd->disable_intr)(unit);
dmar_write4(unit, dmd->msi_data_reg, msi_data);
dmar_write4(unit, dmd->msi_addr_reg, msi_addr);
dmar_write4(unit, dmd->msi_uaddr_reg, msi_addr >> 32);
(dmd->enable_intr)(unit);
DMAR_UNLOCK(unit);
return (0);
}
}
return (ENOENT);
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
}
#endif
static void
dmar_print_caps(device_t dev, struct dmar_unit *unit,
ACPI_DMAR_HARDWARE_UNIT *dmaru)
{
uint32_t caphi, ecaphi;
device_printf(dev, "regs@0x%08jx, ver=%d.%d, seg=%d, flags=<%b>\n",
(uintmax_t)dmaru->Address, DMAR_MAJOR_VER(unit->hw_ver),
DMAR_MINOR_VER(unit->hw_ver), dmaru->Segment,
dmaru->Flags, "\020\001INCLUDE_ALL_PCI");
caphi = unit->hw_cap >> 32;
device_printf(dev, "cap=%b,", (u_int)unit->hw_cap,
"\020\004AFL\005WBF\006PLMR\007PHMR\010CM\027ZLR\030ISOCH");
printf("%b, ", caphi, "\020\010PSI\027DWD\030DRD\031FL1GP\034PSI");
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
printf("ndoms=%d, sagaw=%d, mgaw=%d, fro=%d, nfr=%d, superp=%d",
DMAR_CAP_ND(unit->hw_cap), DMAR_CAP_SAGAW(unit->hw_cap),
DMAR_CAP_MGAW(unit->hw_cap), DMAR_CAP_FRO(unit->hw_cap),
DMAR_CAP_NFR(unit->hw_cap), DMAR_CAP_SPS(unit->hw_cap));
if ((unit->hw_cap & DMAR_CAP_PSI) != 0)
printf(", mamv=%d", DMAR_CAP_MAMV(unit->hw_cap));
printf("\n");
ecaphi = unit->hw_ecap >> 32;
device_printf(dev, "ecap=%b,", (u_int)unit->hw_ecap,
"\020\001C\002QI\003DI\004IR\005EIM\007PT\010SC\031ECS\032MTS"
"\033NEST\034DIS\035PASID\036PRS\037ERS\040SRS");
printf("%b, ", ecaphi, "\020\002NWFS\003EAFS");
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
printf("mhmw=%d, iro=%d\n", DMAR_ECAP_MHMV(unit->hw_ecap),
DMAR_ECAP_IRO(unit->hw_ecap));
}
static int
dmar_attach(device_t dev)
{
struct dmar_unit *unit;
ACPI_DMAR_HARDWARE_UNIT *dmaru;
uint64_t timeout;
int i, error;
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
unit = device_get_softc(dev);
unit->dev = dev;
unit->unit = device_get_unit(dev);
dmaru = dmar_find_by_index(unit->unit);
if (dmaru == NULL)
return (EINVAL);
unit->segment = dmaru->Segment;
unit->base = dmaru->Address;
unit->reg_rid = DMAR_REG_RID;
unit->regs = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
&unit->reg_rid, RF_ACTIVE);
if (unit->regs == NULL) {
device_printf(dev, "cannot allocate register window\n");
return (ENOMEM);
}
unit->hw_ver = dmar_read4(unit, DMAR_VER_REG);
unit->hw_cap = dmar_read8(unit, DMAR_CAP_REG);
unit->hw_ecap = dmar_read8(unit, DMAR_ECAP_REG);
if (bootverbose)
dmar_print_caps(dev, unit, dmaru);
dmar_quirks_post_ident(unit);
timeout = dmar_get_timeout();
TUNABLE_UINT64_FETCH("hw.dmar.timeout", &timeout);
dmar_update_timeout(timeout);
for (i = 0; i < DMAR_INTR_TOTAL; i++)
unit->intrs[i].irq = -1;
unit->intrs[DMAR_INTR_FAULT].name = "fault";
unit->intrs[DMAR_INTR_FAULT].irq_rid = DMAR_FAULT_IRQ_RID;
unit->intrs[DMAR_INTR_FAULT].handler = dmar_fault_intr;
unit->intrs[DMAR_INTR_FAULT].msi_data_reg = DMAR_FEDATA_REG;
unit->intrs[DMAR_INTR_FAULT].msi_addr_reg = DMAR_FEADDR_REG;
unit->intrs[DMAR_INTR_FAULT].msi_uaddr_reg = DMAR_FEUADDR_REG;
unit->intrs[DMAR_INTR_FAULT].enable_intr = dmar_enable_fault_intr;
unit->intrs[DMAR_INTR_FAULT].disable_intr = dmar_disable_fault_intr;
error = dmar_alloc_irq(dev, unit, DMAR_INTR_FAULT);
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
if (error != 0) {
dmar_release_resources(dev, unit);
return (error);
}
if (DMAR_HAS_QI(unit)) {
unit->intrs[DMAR_INTR_QI].name = "qi";
unit->intrs[DMAR_INTR_QI].irq_rid = DMAR_QI_IRQ_RID;
unit->intrs[DMAR_INTR_QI].handler = dmar_qi_intr;
unit->intrs[DMAR_INTR_QI].msi_data_reg = DMAR_IEDATA_REG;
unit->intrs[DMAR_INTR_QI].msi_addr_reg = DMAR_IEADDR_REG;
unit->intrs[DMAR_INTR_QI].msi_uaddr_reg = DMAR_IEUADDR_REG;
unit->intrs[DMAR_INTR_QI].enable_intr = dmar_enable_qi_intr;
unit->intrs[DMAR_INTR_QI].disable_intr = dmar_disable_qi_intr;
error = dmar_alloc_irq(dev, unit, DMAR_INTR_QI);
if (error != 0) {
dmar_release_resources(dev, unit);
return (error);
}
}
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
mtx_init(&unit->lock, "dmarhw", NULL, MTX_DEF);
unit->domids = new_unrhdr(0, dmar_nd2mask(DMAR_CAP_ND(unit->hw_cap)),
&unit->lock);
LIST_INIT(&unit->domains);
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
/*
* 9.2 "Context Entry":
* When Caching Mode (CM) field is reported as Set, the
* domain-id value of zero is architecturally reserved.
* Software must not use domain-id value of zero
* when CM is Set.
*/
if ((unit->hw_cap & DMAR_CAP_CM) != 0)
alloc_unr_specific(unit->domids, 0);
unit->ctx_obj = vm_pager_allocate(OBJT_PHYS, NULL, IDX_TO_OFF(1 +
DMAR_CTX_CNT), 0, 0, NULL);
/*
* Allocate and load the root entry table pointer. Enable the
* address translation after the required invalidations are
* done.
*/
dmar_pgalloc(unit->ctx_obj, 0, DMAR_PGF_WAITOK | DMAR_PGF_ZERO);
DMAR_LOCK(unit);
error = dmar_load_root_entry_ptr(unit);
if (error != 0) {
DMAR_UNLOCK(unit);
dmar_release_resources(dev, unit);
return (error);
}
error = dmar_inv_ctx_glob(unit);
if (error != 0) {
DMAR_UNLOCK(unit);
dmar_release_resources(dev, unit);
return (error);
}
if ((unit->hw_ecap & DMAR_ECAP_DI) != 0) {
error = dmar_inv_iotlb_glob(unit);
if (error != 0) {
DMAR_UNLOCK(unit);
dmar_release_resources(dev, unit);
return (error);
}
}
DMAR_UNLOCK(unit);
error = dmar_init_fault_log(unit);
if (error != 0) {
dmar_release_resources(dev, unit);
return (error);
}
error = dmar_init_qi(unit);
if (error != 0) {
dmar_release_resources(dev, unit);
return (error);
}
Use VT-d interrupt remapping block (IR) to perform FSB messages translation. In particular, despite IO-APICs only take 8bit apic id, IR translation structures accept 32bit APIC Id, which allows x2APIC mode to function properly. Extend msi_cpu of struct msi_intrsrc and io_cpu of ioapic_intsrc to full int from one byte. KPI of IR is isolated into the x86/iommu/iommu_intrmap.h, to avoid bringing all dmar headers into interrupt code. The non-PCI(e) devices which generate message interrupts on FSB require special handling. The HPET FSB interrupts are remapped, while DMAR interrupts are not. For each msi and ioapic interrupt source, the iommu cookie is added, which is in fact index of the IRE (interrupt remap entry) in the IR table. Cookie is made at the source allocation time, and then used at the map time to fill both IRE and device registers. The MSI address/data registers and IO-APIC redirection registers are programmed with the special values which are recognized by IR and used to restore the IRE index, to find proper delivery mode and target. Map all MSI interrupts in the block when msi_map() is called. Since an interrupt source setup and dismantle code are done in the non-sleepable context, flushing interrupt entries cache in the IR hardware, which is done async and ideally waits for the interrupt, requires busy-wait for queue to drain. The dmar_qi_wait_for_seq() is modified to take a boolean argument requesting busy-wait for the written sequence number instead of waiting for interrupt. Some interrupts are configured before IR is initialized, e.g. ACPI SCI. Add intr_reprogram() function to reprogram all already configured interrupts, and call it immediately before an IR unit is enabled. There is still a small window after the IO-APIC redirection entry is reprogrammed with cookie but before the unit is enabled, but to fix this properly, IR must be started much earlier. Add workarounds for 5500 and X58 northbridges, some revisions of which have severe flaws in handling IR. Use the same identification methods as employed by Linux. Review: https://reviews.freebsd.org/D1892 Reviewed by: neel Discussed with: jhb Tested by: glebius, pho (previous versions) Sponsored by: The FreeBSD Foundation MFC after: 3 weeks
2015-03-19 13:57:47 +00:00
error = dmar_init_irt(unit);
if (error != 0) {
dmar_release_resources(dev, unit);
return (error);
}
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
error = dmar_init_busdma(unit);
if (error != 0) {
dmar_release_resources(dev, unit);
return (error);
}
#ifdef NOTYET
DMAR_LOCK(unit);
error = dmar_enable_translation(unit);
if (error != 0) {
DMAR_UNLOCK(unit);
dmar_release_resources(dev, unit);
return (error);
}
DMAR_UNLOCK(unit);
#endif
return (0);
}
static int
dmar_detach(device_t dev)
{
return (EBUSY);
}
static int
dmar_suspend(device_t dev)
{
return (0);
}
static int
dmar_resume(device_t dev)
{
/* XXXKIB */
return (0);
}
static device_method_t dmar_methods[] = {
DEVMETHOD(device_identify, dmar_identify),
DEVMETHOD(device_probe, dmar_probe),
DEVMETHOD(device_attach, dmar_attach),
DEVMETHOD(device_detach, dmar_detach),
DEVMETHOD(device_suspend, dmar_suspend),
DEVMETHOD(device_resume, dmar_resume),
#ifdef DEV_APIC
DEVMETHOD(bus_remap_intr, dmar_remap_intr),
#endif
DEVMETHOD_END
};
static driver_t dmar_driver = {
"dmar",
dmar_methods,
sizeof(struct dmar_unit),
};
DRIVER_MODULE(dmar, acpi, dmar_driver, dmar_devclass, 0, 0);
MODULE_DEPEND(dmar, acpi, 1, 1, 1);
static void
dmar_print_path(device_t dev, const char *banner, int busno, int depth,
const ACPI_DMAR_PCI_PATH *path)
{
int i;
device_printf(dev, "%s [%d, ", banner, busno);
for (i = 0; i < depth; i++) {
if (i != 0)
printf(", ");
printf("(%d, %d)", path[i].Device, path[i].Function);
}
printf("]\n");
}
static int
dmar_dev_depth(device_t child)
{
devclass_t pci_class;
device_t bus, pcib;
int depth;
pci_class = devclass_find("pci");
for (depth = 1; ; depth++) {
bus = device_get_parent(child);
pcib = device_get_parent(bus);
if (device_get_devclass(device_get_parent(pcib)) !=
pci_class)
return (depth);
child = pcib;
}
}
static void
dmar_dev_path(device_t child, int *busno, ACPI_DMAR_PCI_PATH *path, int depth)
{
devclass_t pci_class;
device_t bus, pcib;
pci_class = devclass_find("pci");
for (depth--; depth != -1; depth--) {
path[depth].Device = pci_get_slot(child);
path[depth].Function = pci_get_function(child);
bus = device_get_parent(child);
pcib = device_get_parent(bus);
if (device_get_devclass(device_get_parent(pcib)) !=
pci_class) {
/* reached a host bridge */
*busno = pcib_get_bus(bus);
return;
}
child = pcib;
}
panic("wrong depth");
}
static int
dmar_match_pathes(int busno1, const ACPI_DMAR_PCI_PATH *path1, int depth1,
int busno2, const ACPI_DMAR_PCI_PATH *path2, int depth2,
enum AcpiDmarScopeType scope_type)
{
int i, depth;
if (busno1 != busno2)
return (0);
if (scope_type == ACPI_DMAR_SCOPE_TYPE_ENDPOINT && depth1 != depth2)
return (0);
depth = depth1;
if (depth2 < depth)
depth = depth2;
for (i = 0; i < depth; i++) {
if (path1[i].Device != path2[i].Device ||
path1[i].Function != path2[i].Function)
return (0);
}
return (1);
}
static int
dmar_match_devscope(ACPI_DMAR_DEVICE_SCOPE *devscope, device_t dev,
int dev_busno, const ACPI_DMAR_PCI_PATH *dev_path, int dev_path_len)
{
ACPI_DMAR_PCI_PATH *path;
int path_len;
if (devscope->Length < sizeof(*devscope)) {
printf("dmar_find: corrupted DMAR table, dl %d\n",
devscope->Length);
return (-1);
}
if (devscope->EntryType != ACPI_DMAR_SCOPE_TYPE_ENDPOINT &&
devscope->EntryType != ACPI_DMAR_SCOPE_TYPE_BRIDGE)
return (0);
path_len = devscope->Length - sizeof(*devscope);
if (path_len % 2 != 0) {
printf("dmar_find_bsf: corrupted DMAR table, dl %d\n",
devscope->Length);
return (-1);
}
path_len /= 2;
path = (ACPI_DMAR_PCI_PATH *)(devscope + 1);
if (path_len == 0) {
printf("dmar_find: corrupted DMAR table, dl %d\n",
devscope->Length);
return (-1);
}
if (dmar_match_verbose)
dmar_print_path(dev, "DMAR", devscope->Bus, path_len, path);
return (dmar_match_pathes(devscope->Bus, path, path_len, dev_busno,
dev_path, dev_path_len, devscope->EntryType));
}
struct dmar_unit *
dmar_find(device_t dev)
{
device_t dmar_dev;
ACPI_DMAR_HARDWARE_UNIT *dmarh;
ACPI_DMAR_DEVICE_SCOPE *devscope;
char *ptr, *ptrend;
int i, match, dev_domain, dev_busno, dev_path_len;
dmar_dev = NULL;
dev_domain = pci_get_domain(dev);
dev_path_len = dmar_dev_depth(dev);
ACPI_DMAR_PCI_PATH dev_path[dev_path_len];
dmar_dev_path(dev, &dev_busno, dev_path, dev_path_len);
if (dmar_match_verbose)
dmar_print_path(dev, "PCI", dev_busno, dev_path_len, dev_path);
for (i = 0; i < dmar_devcnt; i++) {
if (dmar_devs[i] == NULL)
continue;
dmarh = dmar_find_by_index(i);
if (dmarh == NULL)
continue;
if (dmarh->Segment != dev_domain)
continue;
if ((dmarh->Flags & ACPI_DMAR_INCLUDE_ALL) != 0) {
dmar_dev = dmar_devs[i];
if (dmar_match_verbose) {
device_printf(dev,
"pci%d:%d:%d:%d matched dmar%d INCLUDE_ALL\n",
dev_domain, pci_get_bus(dev),
pci_get_slot(dev),
pci_get_function(dev),
((struct dmar_unit *)device_get_softc(
dmar_dev))->unit);
}
goto found;
}
ptr = (char *)dmarh + sizeof(*dmarh);
ptrend = (char *)dmarh + dmarh->Header.Length;
for (;;) {
if (ptr >= ptrend)
break;
devscope = (ACPI_DMAR_DEVICE_SCOPE *)ptr;
ptr += devscope->Length;
if (dmar_match_verbose) {
device_printf(dev,
"pci%d:%d:%d:%d matching dmar%d\n",
dev_domain, pci_get_bus(dev),
pci_get_slot(dev),
pci_get_function(dev),
((struct dmar_unit *)device_get_softc(
dmar_devs[i]))->unit);
}
match = dmar_match_devscope(devscope, dev, dev_busno,
dev_path, dev_path_len);
if (dmar_match_verbose) {
if (match == -1)
printf("table error\n");
else if (match == 0)
printf("not matched\n");
else
printf("matched\n");
}
if (match == -1)
return (NULL);
else if (match == 1) {
dmar_dev = dmar_devs[i];
goto found;
}
}
}
return (NULL);
found:
return (device_get_softc(dmar_dev));
}
Use VT-d interrupt remapping block (IR) to perform FSB messages translation. In particular, despite IO-APICs only take 8bit apic id, IR translation structures accept 32bit APIC Id, which allows x2APIC mode to function properly. Extend msi_cpu of struct msi_intrsrc and io_cpu of ioapic_intsrc to full int from one byte. KPI of IR is isolated into the x86/iommu/iommu_intrmap.h, to avoid bringing all dmar headers into interrupt code. The non-PCI(e) devices which generate message interrupts on FSB require special handling. The HPET FSB interrupts are remapped, while DMAR interrupts are not. For each msi and ioapic interrupt source, the iommu cookie is added, which is in fact index of the IRE (interrupt remap entry) in the IR table. Cookie is made at the source allocation time, and then used at the map time to fill both IRE and device registers. The MSI address/data registers and IO-APIC redirection registers are programmed with the special values which are recognized by IR and used to restore the IRE index, to find proper delivery mode and target. Map all MSI interrupts in the block when msi_map() is called. Since an interrupt source setup and dismantle code are done in the non-sleepable context, flushing interrupt entries cache in the IR hardware, which is done async and ideally waits for the interrupt, requires busy-wait for queue to drain. The dmar_qi_wait_for_seq() is modified to take a boolean argument requesting busy-wait for the written sequence number instead of waiting for interrupt. Some interrupts are configured before IR is initialized, e.g. ACPI SCI. Add intr_reprogram() function to reprogram all already configured interrupts, and call it immediately before an IR unit is enabled. There is still a small window after the IO-APIC redirection entry is reprogrammed with cookie but before the unit is enabled, but to fix this properly, IR must be started much earlier. Add workarounds for 5500 and X58 northbridges, some revisions of which have severe flaws in handling IR. Use the same identification methods as employed by Linux. Review: https://reviews.freebsd.org/D1892 Reviewed by: neel Discussed with: jhb Tested by: glebius, pho (previous versions) Sponsored by: The FreeBSD Foundation MFC after: 3 weeks
2015-03-19 13:57:47 +00:00
static struct dmar_unit *
dmar_find_nonpci(u_int id, u_int entry_type, uint16_t *rid)
{
device_t dmar_dev;
struct dmar_unit *unit;
ACPI_DMAR_HARDWARE_UNIT *dmarh;
ACPI_DMAR_DEVICE_SCOPE *devscope;
ACPI_DMAR_PCI_PATH *path;
char *ptr, *ptrend;
#ifdef DEV_APIC
int error;
#endif
Use VT-d interrupt remapping block (IR) to perform FSB messages translation. In particular, despite IO-APICs only take 8bit apic id, IR translation structures accept 32bit APIC Id, which allows x2APIC mode to function properly. Extend msi_cpu of struct msi_intrsrc and io_cpu of ioapic_intsrc to full int from one byte. KPI of IR is isolated into the x86/iommu/iommu_intrmap.h, to avoid bringing all dmar headers into interrupt code. The non-PCI(e) devices which generate message interrupts on FSB require special handling. The HPET FSB interrupts are remapped, while DMAR interrupts are not. For each msi and ioapic interrupt source, the iommu cookie is added, which is in fact index of the IRE (interrupt remap entry) in the IR table. Cookie is made at the source allocation time, and then used at the map time to fill both IRE and device registers. The MSI address/data registers and IO-APIC redirection registers are programmed with the special values which are recognized by IR and used to restore the IRE index, to find proper delivery mode and target. Map all MSI interrupts in the block when msi_map() is called. Since an interrupt source setup and dismantle code are done in the non-sleepable context, flushing interrupt entries cache in the IR hardware, which is done async and ideally waits for the interrupt, requires busy-wait for queue to drain. The dmar_qi_wait_for_seq() is modified to take a boolean argument requesting busy-wait for the written sequence number instead of waiting for interrupt. Some interrupts are configured before IR is initialized, e.g. ACPI SCI. Add intr_reprogram() function to reprogram all already configured interrupts, and call it immediately before an IR unit is enabled. There is still a small window after the IO-APIC redirection entry is reprogrammed with cookie but before the unit is enabled, but to fix this properly, IR must be started much earlier. Add workarounds for 5500 and X58 northbridges, some revisions of which have severe flaws in handling IR. Use the same identification methods as employed by Linux. Review: https://reviews.freebsd.org/D1892 Reviewed by: neel Discussed with: jhb Tested by: glebius, pho (previous versions) Sponsored by: The FreeBSD Foundation MFC after: 3 weeks
2015-03-19 13:57:47 +00:00
int i;
for (i = 0; i < dmar_devcnt; i++) {
dmar_dev = dmar_devs[i];
if (dmar_dev == NULL)
continue;
unit = (struct dmar_unit *)device_get_softc(dmar_dev);
dmarh = dmar_find_by_index(i);
if (dmarh == NULL)
continue;
ptr = (char *)dmarh + sizeof(*dmarh);
ptrend = (char *)dmarh + dmarh->Header.Length;
for (;;) {
if (ptr >= ptrend)
break;
devscope = (ACPI_DMAR_DEVICE_SCOPE *)ptr;
ptr += devscope->Length;
if (devscope->EntryType != entry_type)
continue;
if (devscope->EnumerationId != id)
continue;
#ifdef DEV_APIC
if (entry_type == ACPI_DMAR_SCOPE_TYPE_IOAPIC) {
error = ioapic_get_rid(id, rid);
/*
* If our IOAPIC has PCI bindings then
* use the PCI device rid.
*/
if (error == 0)
return (unit);
}
#endif
Use VT-d interrupt remapping block (IR) to perform FSB messages translation. In particular, despite IO-APICs only take 8bit apic id, IR translation structures accept 32bit APIC Id, which allows x2APIC mode to function properly. Extend msi_cpu of struct msi_intrsrc and io_cpu of ioapic_intsrc to full int from one byte. KPI of IR is isolated into the x86/iommu/iommu_intrmap.h, to avoid bringing all dmar headers into interrupt code. The non-PCI(e) devices which generate message interrupts on FSB require special handling. The HPET FSB interrupts are remapped, while DMAR interrupts are not. For each msi and ioapic interrupt source, the iommu cookie is added, which is in fact index of the IRE (interrupt remap entry) in the IR table. Cookie is made at the source allocation time, and then used at the map time to fill both IRE and device registers. The MSI address/data registers and IO-APIC redirection registers are programmed with the special values which are recognized by IR and used to restore the IRE index, to find proper delivery mode and target. Map all MSI interrupts in the block when msi_map() is called. Since an interrupt source setup and dismantle code are done in the non-sleepable context, flushing interrupt entries cache in the IR hardware, which is done async and ideally waits for the interrupt, requires busy-wait for queue to drain. The dmar_qi_wait_for_seq() is modified to take a boolean argument requesting busy-wait for the written sequence number instead of waiting for interrupt. Some interrupts are configured before IR is initialized, e.g. ACPI SCI. Add intr_reprogram() function to reprogram all already configured interrupts, and call it immediately before an IR unit is enabled. There is still a small window after the IO-APIC redirection entry is reprogrammed with cookie but before the unit is enabled, but to fix this properly, IR must be started much earlier. Add workarounds for 5500 and X58 northbridges, some revisions of which have severe flaws in handling IR. Use the same identification methods as employed by Linux. Review: https://reviews.freebsd.org/D1892 Reviewed by: neel Discussed with: jhb Tested by: glebius, pho (previous versions) Sponsored by: The FreeBSD Foundation MFC after: 3 weeks
2015-03-19 13:57:47 +00:00
if (devscope->Length - sizeof(ACPI_DMAR_DEVICE_SCOPE)
== 2) {
if (rid != NULL) {
path = (ACPI_DMAR_PCI_PATH *)
(devscope + 1);
*rid = PCI_RID(devscope->Bus,
path->Device, path->Function);
}
return (unit);
}
printf(
"dmar_find_nonpci: id %d type %d path length != 2\n",
id, entry_type);
break;
Use VT-d interrupt remapping block (IR) to perform FSB messages translation. In particular, despite IO-APICs only take 8bit apic id, IR translation structures accept 32bit APIC Id, which allows x2APIC mode to function properly. Extend msi_cpu of struct msi_intrsrc and io_cpu of ioapic_intsrc to full int from one byte. KPI of IR is isolated into the x86/iommu/iommu_intrmap.h, to avoid bringing all dmar headers into interrupt code. The non-PCI(e) devices which generate message interrupts on FSB require special handling. The HPET FSB interrupts are remapped, while DMAR interrupts are not. For each msi and ioapic interrupt source, the iommu cookie is added, which is in fact index of the IRE (interrupt remap entry) in the IR table. Cookie is made at the source allocation time, and then used at the map time to fill both IRE and device registers. The MSI address/data registers and IO-APIC redirection registers are programmed with the special values which are recognized by IR and used to restore the IRE index, to find proper delivery mode and target. Map all MSI interrupts in the block when msi_map() is called. Since an interrupt source setup and dismantle code are done in the non-sleepable context, flushing interrupt entries cache in the IR hardware, which is done async and ideally waits for the interrupt, requires busy-wait for queue to drain. The dmar_qi_wait_for_seq() is modified to take a boolean argument requesting busy-wait for the written sequence number instead of waiting for interrupt. Some interrupts are configured before IR is initialized, e.g. ACPI SCI. Add intr_reprogram() function to reprogram all already configured interrupts, and call it immediately before an IR unit is enabled. There is still a small window after the IO-APIC redirection entry is reprogrammed with cookie but before the unit is enabled, but to fix this properly, IR must be started much earlier. Add workarounds for 5500 and X58 northbridges, some revisions of which have severe flaws in handling IR. Use the same identification methods as employed by Linux. Review: https://reviews.freebsd.org/D1892 Reviewed by: neel Discussed with: jhb Tested by: glebius, pho (previous versions) Sponsored by: The FreeBSD Foundation MFC after: 3 weeks
2015-03-19 13:57:47 +00:00
}
}
return (NULL);
}
struct dmar_unit *
dmar_find_hpet(device_t dev, uint16_t *rid)
{
return (dmar_find_nonpci(hpet_get_uid(dev), ACPI_DMAR_SCOPE_TYPE_HPET,
rid));
Use VT-d interrupt remapping block (IR) to perform FSB messages translation. In particular, despite IO-APICs only take 8bit apic id, IR translation structures accept 32bit APIC Id, which allows x2APIC mode to function properly. Extend msi_cpu of struct msi_intrsrc and io_cpu of ioapic_intsrc to full int from one byte. KPI of IR is isolated into the x86/iommu/iommu_intrmap.h, to avoid bringing all dmar headers into interrupt code. The non-PCI(e) devices which generate message interrupts on FSB require special handling. The HPET FSB interrupts are remapped, while DMAR interrupts are not. For each msi and ioapic interrupt source, the iommu cookie is added, which is in fact index of the IRE (interrupt remap entry) in the IR table. Cookie is made at the source allocation time, and then used at the map time to fill both IRE and device registers. The MSI address/data registers and IO-APIC redirection registers are programmed with the special values which are recognized by IR and used to restore the IRE index, to find proper delivery mode and target. Map all MSI interrupts in the block when msi_map() is called. Since an interrupt source setup and dismantle code are done in the non-sleepable context, flushing interrupt entries cache in the IR hardware, which is done async and ideally waits for the interrupt, requires busy-wait for queue to drain. The dmar_qi_wait_for_seq() is modified to take a boolean argument requesting busy-wait for the written sequence number instead of waiting for interrupt. Some interrupts are configured before IR is initialized, e.g. ACPI SCI. Add intr_reprogram() function to reprogram all already configured interrupts, and call it immediately before an IR unit is enabled. There is still a small window after the IO-APIC redirection entry is reprogrammed with cookie but before the unit is enabled, but to fix this properly, IR must be started much earlier. Add workarounds for 5500 and X58 northbridges, some revisions of which have severe flaws in handling IR. Use the same identification methods as employed by Linux. Review: https://reviews.freebsd.org/D1892 Reviewed by: neel Discussed with: jhb Tested by: glebius, pho (previous versions) Sponsored by: The FreeBSD Foundation MFC after: 3 weeks
2015-03-19 13:57:47 +00:00
}
struct dmar_unit *
dmar_find_ioapic(u_int apic_id, uint16_t *rid)
{
return (dmar_find_nonpci(apic_id, ACPI_DMAR_SCOPE_TYPE_IOAPIC, rid));
}
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
struct rmrr_iter_args {
struct dmar_domain *domain;
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
device_t dev;
int dev_domain;
int dev_busno;
ACPI_DMAR_PCI_PATH *dev_path;
int dev_path_len;
struct dmar_map_entries_tailq *rmrr_entries;
};
static int
dmar_rmrr_iter(ACPI_DMAR_HEADER *dmarh, void *arg)
{
struct rmrr_iter_args *ria;
ACPI_DMAR_RESERVED_MEMORY *resmem;
ACPI_DMAR_DEVICE_SCOPE *devscope;
struct dmar_map_entry *entry;
char *ptr, *ptrend;
int match;
if (dmarh->Type != ACPI_DMAR_TYPE_RESERVED_MEMORY)
return (1);
ria = arg;
resmem = (ACPI_DMAR_RESERVED_MEMORY *)dmarh;
if (dmar_match_verbose) {
printf("RMRR [%jx,%jx] segment %d\n",
(uintmax_t)resmem->BaseAddress,
(uintmax_t)resmem->EndAddress,
resmem->Segment);
}
if (resmem->Segment != ria->dev_domain)
return (1);
ptr = (char *)resmem + sizeof(*resmem);
ptrend = (char *)resmem + resmem->Header.Length;
for (;;) {
if (ptr >= ptrend)
break;
devscope = (ACPI_DMAR_DEVICE_SCOPE *)ptr;
ptr += devscope->Length;
match = dmar_match_devscope(devscope, ria->dev, ria->dev_busno,
ria->dev_path, ria->dev_path_len);
if (match == 1) {
if (dmar_match_verbose)
printf("matched\n");
entry = dmar_gas_alloc_entry(ria->domain,
DMAR_PGF_WAITOK);
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
entry->start = resmem->BaseAddress;
/* The RMRR entry end address is inclusive. */
entry->end = resmem->EndAddress;
TAILQ_INSERT_TAIL(ria->rmrr_entries, entry,
unroll_link);
} else if (dmar_match_verbose) {
printf("not matched, err %d\n", match);
}
}
return (1);
}
void
dmar_dev_parse_rmrr(struct dmar_domain *domain, device_t dev,
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
struct dmar_map_entries_tailq *rmrr_entries)
{
struct rmrr_iter_args ria;
ria.dev_domain = pci_get_domain(dev);
ria.dev_path_len = dmar_dev_depth(dev);
ACPI_DMAR_PCI_PATH dev_path[ria.dev_path_len];
dmar_dev_path(dev, &ria.dev_busno, dev_path, ria.dev_path_len);
if (dmar_match_verbose) {
device_printf(dev, "parsing RMRR entries for ");
dmar_print_path(dev, "PCI", ria.dev_busno, ria.dev_path_len,
dev_path);
}
ria.domain = domain;
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
ria.dev = dev;
ria.dev_path = dev_path;
ria.rmrr_entries = rmrr_entries;
dmar_iterate_tbl(dmar_rmrr_iter, &ria);
}
struct inst_rmrr_iter_args {
struct dmar_unit *dmar;
};
static device_t
dmar_path_dev(int segment, int path_len, int busno,
const ACPI_DMAR_PCI_PATH *path)
{
devclass_t pci_class;
device_t bus, pcib, dev;
int i;
pci_class = devclass_find("pci");
dev = NULL;
for (i = 0; i < path_len; i++, path++) {
dev = pci_find_dbsf(segment, busno, path->Device,
path->Function);
if (dev == NULL)
break;
if (i != path_len - 1) {
bus = device_get_parent(dev);
pcib = device_get_parent(bus);
if (device_get_devclass(device_get_parent(pcib)) !=
pci_class)
return (NULL);
}
busno = pcib_get_bus(dev);
}
return (dev);
}
static int
dmar_inst_rmrr_iter(ACPI_DMAR_HEADER *dmarh, void *arg)
{
const ACPI_DMAR_RESERVED_MEMORY *resmem;
const ACPI_DMAR_DEVICE_SCOPE *devscope;
struct inst_rmrr_iter_args *iria;
const char *ptr, *ptrend;
struct dmar_unit *dev_dmar;
device_t dev;
if (dmarh->Type != ACPI_DMAR_TYPE_RESERVED_MEMORY)
return (1);
iria = arg;
resmem = (ACPI_DMAR_RESERVED_MEMORY *)dmarh;
if (resmem->Segment != iria->dmar->segment)
return (1);
if (dmar_match_verbose) {
printf("dmar%d: RMRR [%jx,%jx]\n", iria->dmar->unit,
(uintmax_t)resmem->BaseAddress,
(uintmax_t)resmem->EndAddress);
}
ptr = (const char *)resmem + sizeof(*resmem);
ptrend = (const char *)resmem + resmem->Header.Length;
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
for (;;) {
if (ptr >= ptrend)
break;
devscope = (const ACPI_DMAR_DEVICE_SCOPE *)ptr;
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
ptr += devscope->Length;
/* XXXKIB bridge */
if (devscope->EntryType != ACPI_DMAR_SCOPE_TYPE_ENDPOINT)
continue;
if (dmar_match_verbose) {
dmar_print_path(iria->dmar->dev, "RMRR scope",
devscope->Bus, (devscope->Length -
sizeof(ACPI_DMAR_DEVICE_SCOPE)) / 2,
(const ACPI_DMAR_PCI_PATH *)(devscope + 1));
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
}
dev = dmar_path_dev(resmem->Segment, (devscope->Length -
sizeof(ACPI_DMAR_DEVICE_SCOPE)) / 2, devscope->Bus,
(const ACPI_DMAR_PCI_PATH *)(devscope + 1));
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
if (dev == NULL) {
if (dmar_match_verbose)
printf("null dev\n");
continue;
}
dev_dmar = dmar_find(dev);
if (dev_dmar != iria->dmar) {
if (dmar_match_verbose) {
printf("dmar%d matched, skipping\n",
dev_dmar->unit);
}
continue;
}
if (dmar_match_verbose)
printf("matched, instantiating RMRR context\n");
dmar_instantiate_ctx(iria->dmar, dev, true);
}
return (1);
}
/*
* Pre-create all contexts for the DMAR which have RMRR entries.
*/
int
dmar_instantiate_rmrr_ctxs(struct dmar_unit *dmar)
{
struct inst_rmrr_iter_args iria;
int error;
if (!dmar_barrier_enter(dmar, DMAR_BARRIER_RMRR))
return (0);
error = 0;
iria.dmar = dmar;
if (dmar_match_verbose)
printf("dmar%d: instantiating RMRR contexts\n", dmar->unit);
dmar_iterate_tbl(dmar_inst_rmrr_iter, &iria);
DMAR_LOCK(dmar);
if (!LIST_EMPTY(&dmar->domains)) {
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
KASSERT((dmar->hw_gcmd & DMAR_GCMD_TE) == 0,
("dmar%d: RMRR not handled but translation is already enabled",
dmar->unit));
error = dmar_enable_translation(dmar);
}
dmar_barrier_exit(dmar, DMAR_BARRIER_RMRR);
return (error);
}
#ifdef DDB
#include <ddb/ddb.h>
#include <ddb/db_lex.h>
static void
dmar_print_domain_entry(const struct dmar_map_entry *entry)
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
{
struct dmar_map_entry *l, *r;
db_printf(
" start %jx end %jx free_after %jx free_down %jx flags %x ",
entry->start, entry->end, entry->free_after, entry->free_down,
entry->flags);
db_printf("left ");
l = RB_LEFT(entry, rb_entry);
if (l == NULL)
db_printf("NULL ");
else
db_printf("%jx ", l->start);
db_printf("right ");
r = RB_RIGHT(entry, rb_entry);
if (r == NULL)
db_printf("NULL");
else
db_printf("%jx", r->start);
db_printf("\n");
}
static void
dmar_print_ctx(struct dmar_ctx *ctx)
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
{
db_printf(
" @%p pci%d:%d:%d refs %d flags %x loads %lu unloads %lu\n",
ctx, pci_get_bus(ctx->ctx_tag.owner),
pci_get_slot(ctx->ctx_tag.owner),
pci_get_function(ctx->ctx_tag.owner), ctx->refs, ctx->flags,
ctx->loads, ctx->unloads);
}
static void
dmar_print_domain(struct dmar_domain *domain, bool show_mappings)
{
struct dmar_map_entry *entry;
struct dmar_ctx *ctx;
db_printf(
" @%p dom %d mgaw %d agaw %d pglvl %d end %jx refs %d\n"
" ctx_cnt %d flags %x pgobj %p map_ents %u\n",
domain, domain->domain, domain->mgaw, domain->agaw, domain->pglvl,
(uintmax_t)domain->end, domain->refs, domain->ctx_cnt,
domain->flags, domain->pgtbl_obj, domain->entries_cnt);
if (!LIST_EMPTY(&domain->contexts)) {
db_printf(" Contexts:\n");
LIST_FOREACH(ctx, &domain->contexts, link)
dmar_print_ctx(ctx);
}
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
if (!show_mappings)
return;
db_printf(" mapped:\n");
RB_FOREACH(entry, dmar_gas_entries_tree, &domain->rb_root) {
dmar_print_domain_entry(entry);
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
if (db_pager_quit)
break;
}
if (db_pager_quit)
return;
db_printf(" unloading:\n");
TAILQ_FOREACH(entry, &domain->unload_entries, dmamap_link) {
dmar_print_domain_entry(entry);
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
if (db_pager_quit)
break;
}
}
DB_FUNC(dmar_domain, db_dmar_print_domain, db_show_table, CS_OWN, NULL)
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
{
struct dmar_unit *unit;
struct dmar_domain *domain;
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
struct dmar_ctx *ctx;
bool show_mappings, valid;
int pci_domain, bus, device, function, i, t;
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
db_expr_t radix;
valid = false;
radix = db_radix;
db_radix = 10;
t = db_read_token();
if (t == tSLASH) {
t = db_read_token();
if (t != tIDENT) {
db_printf("Bad modifier\n");
db_radix = radix;
db_skip_to_eol();
return;
}
show_mappings = strchr(db_tok_string, 'm') != NULL;
t = db_read_token();
} else {
show_mappings = false;
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
}
if (t == tNUMBER) {
pci_domain = db_tok_number;
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
t = db_read_token();
if (t == tNUMBER) {
bus = db_tok_number;
t = db_read_token();
if (t == tNUMBER) {
device = db_tok_number;
t = db_read_token();
if (t == tNUMBER) {
function = db_tok_number;
valid = true;
}
}
}
}
db_radix = radix;
db_skip_to_eol();
if (!valid) {
db_printf("usage: show dmar_domain [/m] "
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
"<domain> <bus> <device> <func>\n");
return;
}
for (i = 0; i < dmar_devcnt; i++) {
unit = device_get_softc(dmar_devs[i]);
LIST_FOREACH(domain, &unit->domains, link) {
LIST_FOREACH(ctx, &domain->contexts, link) {
if (pci_domain == unit->segment &&
bus == pci_get_bus(ctx->ctx_tag.owner) &&
device ==
pci_get_slot(ctx->ctx_tag.owner) &&
function ==
pci_get_function(ctx->ctx_tag.owner)) {
dmar_print_domain(domain,
show_mappings);
goto out;
}
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
}
}
}
out:;
}
static void
dmar_print_one(int idx, bool show_domains, bool show_mappings)
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
{
struct dmar_unit *unit;
struct dmar_domain *domain;
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
int i, frir;
unit = device_get_softc(dmar_devs[idx]);
db_printf("dmar%d at %p, root at 0x%jx, ver 0x%x\n", unit->unit, unit,
dmar_read8(unit, DMAR_RTADDR_REG), dmar_read4(unit, DMAR_VER_REG));
db_printf("cap 0x%jx ecap 0x%jx gsts 0x%x fsts 0x%x fectl 0x%x\n",
(uintmax_t)dmar_read8(unit, DMAR_CAP_REG),
(uintmax_t)dmar_read8(unit, DMAR_ECAP_REG),
dmar_read4(unit, DMAR_GSTS_REG),
dmar_read4(unit, DMAR_FSTS_REG),
dmar_read4(unit, DMAR_FECTL_REG));
if (unit->ir_enabled) {
db_printf("ir is enabled; IRT @%p phys 0x%jx maxcnt %d\n",
unit->irt, (uintmax_t)unit->irt_phys, unit->irte_cnt);
}
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
db_printf("fed 0x%x fea 0x%x feua 0x%x\n",
dmar_read4(unit, DMAR_FEDATA_REG),
dmar_read4(unit, DMAR_FEADDR_REG),
dmar_read4(unit, DMAR_FEUADDR_REG));
db_printf("primary fault log:\n");
for (i = 0; i < DMAR_CAP_NFR(unit->hw_cap); i++) {
frir = (DMAR_CAP_FRO(unit->hw_cap) + i) * 16;
db_printf(" %d at 0x%x: %jx %jx\n", i, frir,
(uintmax_t)dmar_read8(unit, frir),
(uintmax_t)dmar_read8(unit, frir + 8));
}
if (DMAR_HAS_QI(unit)) {
db_printf("ied 0x%x iea 0x%x ieua 0x%x\n",
dmar_read4(unit, DMAR_IEDATA_REG),
dmar_read4(unit, DMAR_IEADDR_REG),
dmar_read4(unit, DMAR_IEUADDR_REG));
if (unit->qi_enabled) {
db_printf("qi is enabled: queue @0x%jx (IQA 0x%jx) "
"size 0x%jx\n"
" head 0x%x tail 0x%x avail 0x%x status 0x%x ctrl 0x%x\n"
" hw compl 0x%x@%p/phys@%jx next seq 0x%x gen 0x%x\n",
(uintmax_t)unit->inv_queue,
(uintmax_t)dmar_read8(unit, DMAR_IQA_REG),
(uintmax_t)unit->inv_queue_size,
dmar_read4(unit, DMAR_IQH_REG),
dmar_read4(unit, DMAR_IQT_REG),
unit->inv_queue_avail,
dmar_read4(unit, DMAR_ICS_REG),
dmar_read4(unit, DMAR_IECTL_REG),
unit->inv_waitd_seq_hw,
&unit->inv_waitd_seq_hw,
(uintmax_t)unit->inv_waitd_seq_hw_phys,
unit->inv_waitd_seq,
unit->inv_waitd_gen);
} else {
db_printf("qi is disabled\n");
}
}
if (show_domains) {
db_printf("domains:\n");
LIST_FOREACH(domain, &unit->domains, link) {
dmar_print_domain(domain, show_mappings);
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
if (db_pager_quit)
break;
}
}
}
DB_SHOW_COMMAND(dmar, db_dmar_print)
{
bool show_domains, show_mappings;
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
show_domains = strchr(modif, 'd') != NULL;
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
show_mappings = strchr(modif, 'm') != NULL;
if (!have_addr) {
db_printf("usage: show dmar [/d] [/m] index\n");
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
return;
}
dmar_print_one((int)addr, show_domains, show_mappings);
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
}
DB_SHOW_ALL_COMMAND(dmars, db_show_all_dmars)
{
int i;
bool show_domains, show_mappings;
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
show_domains = strchr(modif, 'd') != NULL;
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
show_mappings = strchr(modif, 'm') != NULL;
for (i = 0; i < dmar_devcnt; i++) {
dmar_print_one(i, show_domains, show_mappings);
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
if (db_pager_quit)
break;
}
}
#endif