freebsd-dev/sys/dev/isci/scil/sati_atapi.h

180 lines
7.7 KiB
C
Raw Normal View History

/*-
* SPDX-License-Identifier: BSD-2-Clause OR GPL-2.0
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* BSD LICENSE
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _SATI_ATAPI_H_
#define _SATI_ATAPI_H_
/**
* @file
* @brief This file contains all of the interface methods, macros, structures
* that can be utilized by a user to perform SCSI-to-ATA PACKET IO
* Translation.
*/
#include <dev/isci/scil/sati_types.h>
#include <dev/isci/scil/sati_translator_sequence.h>
/**
* @brief This method translates the supplied SCSI command into a
* corresponding ATA packet protocol command.
*
* @param[in] sequence This parameter specifies the sequence
* data associated with the translation.
* @param[in] sati_device This parameter specifies the remote device
* for which the translated request is destined.
* @param[in,out] scsi_io This parameter specifies the user's SCSI IO request
* object. SATI expects that the user can access the SCSI CDB,
* response, and data from this pointer. For example, if there
* is a failure in translation resulting in sense data, then
* SATI will call sati_cb_set_status() and pass the scsi_io
* pointer as a parameter.
* @param[out] atapi_io This parameter specifies the location of the
* ATA Packet FIS into which the translator can write the resultant
* ATA command if translation is successful. This parameter is
* passed back to the user through the SATI_SATA_CALLBACKS when it
* is necessary to write fields in the ata_io.
*
* @return Indicate if the translation was successful.
* @retval SATI_SUCCESS
* @retval SATI_FAILURE_CHECK_RESPONSE_DATA
*/
SATI_STATUS sati_atapi_translate_command(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
SATI_DEVICE_T * sati_device,
void * scsi_io,
void * atapi_io
);
/**
* @brief This method translates the supplied ATA packet IO response into the
* corresponding SCSI command response.
*
* @param[out] sequence This parameter specifies the sequence
* data associated with the translation and will be updated
* according to the command response.
* @param[out] scsi_io This parameter specifies the user's SCSI IO request
* object. SATI expects that the user can access the SCSI CDB,
* response, and data from this pointer. For example, if there
* is a failure in translation resulting in sense data, then
* SATI will call sati_cb_set_status() and pass the scsi_io
* pointer as a parameter.
* @param[in] atapi_io This parameter specifies the location of the
* ATAPI IO request (e.g. register FIS, PIO Setup etc.) from which
* the translator can read the received ATA status and error
* fields.
*
* @return Indicate if the translation was successful.
* @retval SATI_SUCCESS
* @retval SATI_FAILURE_CHECK_RESPONSE_DATA
*/
SATI_STATUS sati_atapi_translate_command_response(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * atapi_io
);
/**
* @brief This method translates the internal Request Sense command response
* and set the sense data for the previous failed SCSI command.
*
* @param[out] sequence This parameter specifies the sequence
* data associated with the translation and to be updated to
* final state.
* @param[out] scsi_io This parameter specifies the user's SCSI IO request
* object. SATI expects that the user can access the SCSI CDB,
* response, and data from this pointer. For example, if there
* is a failure in translation resulting in sense data, then
* SATI will call sati_cb_set_status() and pass the scsi_io
* pointer as a parameter.
* @param[in] atapi_io This parameter specifies the location of the
* ATAPI IO request (e.g. register FIS, PIO Setup etc.) from which
* the translator can read the received ATA status and error
* fields.
*
* @return None.
*/
void sati_atapi_translate_request_sense_response(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * atapi_io
);
/**
* @brief This method retrieve ATA packet IO actual transferred data length.
*
* @param[in] sequence This parameter specifies the sequence
* data associated with the translation.
* @param[out] scsi_io This parameter specifies the user's SCSI IO request
* object. SATI expects that the user can access the SCSI CDB,
* response, and data from this pointer. For example, if there
* is a failure in translation resulting in sense data, then
* SATI will call sati_cb_set_status() and pass the scsi_io
* pointer as a parameter.
* @param[out] atapi_io This parameter specifies the location of the
* ATAPI IO request (e.g. register FIS, PIO Setup etc.) from which
* the translator can read the received ATA status and error
* fields.
*
* @return Actual data transfer length.
*/
U32 sati_atapi_translate_number_of_bytes_transferred(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * atapi_io
);
#endif