freebsd-dev/lib/libusb/libusb20_desc.h

606 lines
18 KiB
C
Raw Normal View History

Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
/* $FreeBSD$ */
/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
* Copyright (c) 2008 Hans Petter Selasky. All rights reserved.
* Copyright (c) 2007-2008 Daniel Drake. All rights reserved.
* Copyright (c) 2001 Johannes Erdfelt. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* NOTE: This file contains the definition of some standard USB
* structures. All structures which name ends by *DECODED use host byte
* order.
*/
/*
* NOTE: This file uses a lot of macros. If you want to see what the
* macros become when they are expanded then run the following
* commands from your shell:
*
* cpp libusb20_desc.h > temp.h
* indent temp.h
* less temp.h
*/
#ifndef _LIBUSB20_DESC_H_
#define _LIBUSB20_DESC_H_
#ifndef LIBUSB_GLOBAL_INCLUDE_FILE
#include <stdint.h>
#endif
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
#ifdef __cplusplus
extern "C" {
#endif
#if 0
}; /* style */
#endif
/* basic macros */
#define LIBUSB20__NOT(...) __VA_ARGS__
#define LIBUSB20_NOT(arg) LIBUSB20__NOT(LIBUSB20_YES arg(() LIBUSB20_NO))
#define LIBUSB20_YES(...) __VA_ARGS__
#define LIBUSB20_NO(...)
#define LIBUSB20_END(...) __VA_ARGS__
#define LIBUSB20_MAX(a,b) (((a) > (b)) ? (a) : (b))
#define LIBUSB20_MIN(a,b) (((a) < (b)) ? (a) : (b))
#define LIBUSB20_ADD_BYTES(ptr,off) \
src/sys/dev/usb2/controller/uss820dci_pccard.c src/sys/dev/usb2/core/usbdevs src/sys/dev/usb2/include/urio2_ioctl.h src/sys/dev/usb2/storage/ustorage2_fs.h These files are not used any more. src/usr.sbin/Makefile src/etc/mtree/BSD.include.dist src/include/Makefile src/lib/Makefile src/share/man/man7/hier.7 src/share/mk/bsd.libnames.mk src/etc/mtree/BSD.include.dist Make "usbconfig" and "libusb20" a part of the default build. src/sys/dev/usb/rio500_usb.h src/sys/dev/usb2/storage/urio2.c Use common include file. src/sys/dev/usb2/bluetooth/ng_ubt2.c Make USB bluetooth depend on "ng_hci" module. src/sys/dev/usb2/controller/ehci2.c src/sys/dev/usb2/controller/ehci2.h Patches for Marvell EHCI. src/sys/dev/usb2/core/usb2_busdma.c Bugfix for 64-bit platforms. Need to unload the previously loaded DMA map and some cleanup regarding some corner cases. src/sys/dev/usb2/core/usb2_core.h src/sys/dev/usb2/core/usb2_dev.c src/sys/dev/usb2/core/usb2_dev.h Bugfix for libusb filesystem interface. New feature: Add support for filtering device data at the expense of the userland process. Add some more comments. Some minor code styling. Remove unused function, usb2_fifo_get_data_next(). Fix an issue about "fifo_index" being used instead of "ep_index". src/sys/dev/usb2/core/usb2_device.c src/sys/dev/usb2/core/usb2_generic.c Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when doing an alternate setting. Cleanup USB IOCTL and USB reference handling. Fix a corner case where USB-FS was left initialised after setting a new configuration or alternate setting. src/sys/dev/usb2/core/usb2_hub.c Improvement: Check all USB HUB ports by default at least one time. src/sys/dev/usb2/core/usb2_request.c Bugfix: Make sure destination ASCII string is properly zero terminated in all cases. Improvement: Skip invalid characters instead of replacing with a dot. src/sys/dev/usb2/core/usb2_util.c src/sys/dev/usb2/image/uscanner2.c Spelling. src/sys/dev/usb2/include/Makefile Share "usbdevs" with the old USB stack. src/sys/dev/usb2/include/usb2_devid.h src/sys/dev/usb2/include/usb2_devtable.h Regenerate files. Alfred: Please fix the RCS tag at the top. src/sys/dev/usb2/include/usb2_ioctl.h Fix compilation of "kdump". src/sys/dev/usb2/serial/ubsa2.c src/sys/dev/usb2/serial/ugensa2.c Remove device ID's which will end up in a new 3G driver. src/sys/dev/usb2/sound/uaudio2.c Correct a debug printout. src/sys/dev/usb2/storage/umass2.c Sync with old USB stack. src/lib/libusb20/libusb20.3 Add more documentation. src/lib/libusb20/libusb20.c Various bugfixes and improvements. src/usr.sbin/usbconfig/dump.c src/usr.sbin/usbconfig/usbconfig.c New commands for dumping strings and doing custom USB requests from the command line. Remove keyword requirements from generated files: "head/sys/dev/usb2/include/usb2_devid.h" "head/sys/dev/usb2/include/usb2_devtable.h"
2008-11-19 08:56:35 +00:00
((void *)(((const uint8_t *)(ptr)) + (off) - ((const uint8_t *)0)))
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
/* basic message elements */
enum {
LIBUSB20_ME_INT8,
LIBUSB20_ME_INT16,
LIBUSB20_ME_INT32,
LIBUSB20_ME_INT64,
LIBUSB20_ME_STRUCT,
LIBUSB20_ME_MAX, /* used to indicate end */
};
/* basic message element modifiers */
enum {
LIBUSB20_ME_IS_UNSIGNED = 0x00,
LIBUSB20_ME_IS_SIGNED = 0x80,
LIBUSB20_ME_MASK = 0x7F,
};
enum {
LIBUSB20_ME_IS_RAW, /* structure excludes length field
* (hardcoded value) */
LIBUSB20_ME_IS_ENCODED, /* structure includes length field */
LIBUSB20_ME_IS_EMPTY, /* no structure */
LIBUSB20_ME_IS_DECODED, /* structure is recursive */
};
/* basic helper structures and macros */
#define LIBUSB20_ME_STRUCT_ALIGN sizeof(void *)
struct libusb20_me_struct {
void *ptr; /* data pointer */
uint16_t len; /* defaults to zero */
uint16_t type; /* defaults to LIBUSB20_ME_IS_EMPTY */
} __aligned(LIBUSB20_ME_STRUCT_ALIGN);
struct libusb20_me_format {
const uint8_t *format; /* always set */
const char *desc; /* optionally set */
const char *fields; /* optionally set */
};
#define LIBUSB20_ME_STRUCT(n, field, arg, ismeta) \
ismeta ( LIBUSB20_ME_STRUCT, 1, 0, ) \
LIBUSB20_NOT(ismeta) ( struct libusb20_me_struct field; )
#define LIBUSB20_ME_STRUCT_ARRAY(n, field, arg, ismeta) \
ismeta ( LIBUSB20_ME_STRUCT , (arg) & 0xFF, \
((arg) / 0x100) & 0xFF, ) \
LIBUSB20_NOT(ismeta) ( struct libusb20_me_struct field [arg]; )
#define LIBUSB20_ME_INTEGER(n, field, ismeta, un, u, bits, a, size) \
ismeta ( LIBUSB20_ME_INT##bits | \
LIBUSB20_ME_IS_##un##SIGNED , \
(size) & 0xFF, ((size) / 0x100) & 0xFF, ) \
LIBUSB20_NOT(ismeta) ( u##int##bits##_t \
__aligned((bits) / 8) field a; )
#define LIBUSB20_ME_UINT8_T(n, field, arg, ismeta) \
LIBUSB20_ME_INTEGER(n, field, ismeta, UN, u, 8, , 1)
#define LIBUSB20_ME_UINT8_ARRAY_T(n, field, arg, ismeta) \
LIBUSB20_ME_INTEGER(n, field, ismeta, UN, u, 8, [arg], arg)
#define LIBUSB20_ME_SINT8_T(n, field, arg, ismeta) \
LIBUSB20_ME_INTEGER(n, field, ismeta,,, 8, , 1)
#define LIBUSB20_ME_SINT8_ARRAY_T(n, field, arg, ismeta) \
LIBUSB20_ME_INTEGER(n, field, ismeta,,, 8, [arg], arg)
#define LIBUSB20_ME_UINT16_T(n, field, arg, ismeta) \
LIBUSB20_ME_INTEGER(n, field, ismeta, UN, u, 16, , 1)
#define LIBUSB20_ME_UINT16_ARRAY_T(n, field, arg, ismeta) \
LIBUSB20_ME_INTEGER(n, field, ismeta, UN, u, 16, [arg], arg)
#define LIBUSB20_ME_SINT16_T(n, field, arg, ismeta) \
LIBUSB20_ME_INTEGER(n, field, ismeta,,, 16, , 1)
#define LIBUSB20_ME_SINT16_ARRAY_T(n, field, arg, ismeta) \
LIBUSB20_ME_INTEGER(n, field, ismeta,,, 16, [arg], arg)
#define LIBUSB20_ME_UINT32_T(n, field, arg, ismeta) \
LIBUSB20_ME_INTEGER(n, field, ismeta, UN, u, 32, , 1)
#define LIBUSB20_ME_UINT32_ARRAY_T(n, field, arg, ismeta) \
LIBUSB20_ME_INTEGER(n, field, ismeta, UN, u, 32, [arg], arg)
#define LIBUSB20_ME_SINT32_T(n, field, arg, ismeta) \
LIBUSB20_ME_INTEGER(n, field, ismeta,,, 32, , 1)
#define LIBUSB20_ME_SINT32_ARRAY_T(n, field, arg, ismeta) \
LIBUSB20_ME_INTEGER(n, field, ismeta,,, 32, [arg], arg)
#define LIBUSB20_ME_UINT64_T(n, field, arg, ismeta) \
LIBUSB20_ME_INTEGER(n, field, ismeta, UN, u, 64, , 1)
#define LIBUSB20_ME_UINT64_ARRAY_T(n, field, arg, ismeta) \
LIBUSB20_ME_INTEGER(n, field, ismeta, UN, u, 64, [arg], arg)
#define LIBUSB20_ME_SINT64_T(n, field, arg, ismeta) \
LIBUSB20_ME_INTEGER(n, field, ismeta,,, 64, , 1)
#define LIBUSB20_ME_SINT64_ARRAY_T(n, field, arg, ismeta) \
LIBUSB20_ME_INTEGER(n, field, ismeta,,, 64, [arg], arg)
#define LIBUSB20_MAKE_DECODED_FIELD(n, type, field, arg) \
LIBUSB20_ME_##type (n, field, arg, LIBUSB20_NO)
#define LIBUSB20_MAKE_STRUCT(name) \
extern const struct libusb20_me_format \
name##_FORMAT[1]; \
struct name##_DECODED { \
const struct libusb20_me_format *name##_FORMAT; \
name (LIBUSB20_MAKE_DECODED_FIELD,) \
}
#define LIBUSB20_MAKE_STRUCT_FORMAT(name) \
const struct libusb20_me_format \
name##_FORMAT[1] = {{ \
.format = LIBUSB20_MAKE_FORMAT(name), \
.desc = #name, \
.fields = NULL, \
}}
#define LIBUSB20_MAKE_FORMAT_SUB(n, type, field, arg) \
LIBUSB20_ME_##type (n, field, arg, LIBUSB20_YES)
#define LIBUSB20_MAKE_FORMAT(what) (const uint8_t []) \
{ what (LIBUSB20_MAKE_FORMAT_SUB, ) LIBUSB20_ME_MAX, 0, 0 }
#define LIBUSB20_INIT(what, ptr) do { \
memset(ptr, 0, sizeof(*(ptr))); \
(ptr)->what##_FORMAT = what##_FORMAT; \
} while (0)
#define LIBUSB20_DEVICE_DESC(m,n) \
m(n, UINT8_T, bLength, ) \
m(n, UINT8_T, bDescriptorType, ) \
m(n, UINT16_T, bcdUSB, ) \
m(n, UINT8_T, bDeviceClass, ) \
m(n, UINT8_T, bDeviceSubClass, ) \
m(n, UINT8_T, bDeviceProtocol, ) \
m(n, UINT8_T, bMaxPacketSize0, ) \
m(n, UINT16_T, idVendor, ) \
m(n, UINT16_T, idProduct, ) \
m(n, UINT16_T, bcdDevice, ) \
m(n, UINT8_T, iManufacturer, ) \
m(n, UINT8_T, iProduct, ) \
m(n, UINT8_T, iSerialNumber, ) \
m(n, UINT8_T, bNumConfigurations, ) \
LIBUSB20_MAKE_STRUCT(LIBUSB20_DEVICE_DESC);
#define LIBUSB20_ENDPOINT_DESC(m,n) \
m(n, UINT8_T, bLength, ) \
m(n, UINT8_T, bDescriptorType, ) \
m(n, UINT8_T, bEndpointAddress, ) \
m(n, UINT8_T, bmAttributes, ) \
m(n, UINT16_T, wMaxPacketSize, ) \
m(n, UINT8_T, bInterval, ) \
m(n, UINT8_T, bRefresh, ) \
m(n, UINT8_T, bSynchAddress, ) \
LIBUSB20_MAKE_STRUCT(LIBUSB20_ENDPOINT_DESC);
#define LIBUSB20_INTERFACE_DESC(m,n) \
m(n, UINT8_T, bLength, ) \
m(n, UINT8_T, bDescriptorType, ) \
m(n, UINT8_T, bInterfaceNumber, ) \
m(n, UINT8_T, bAlternateSetting, ) \
m(n, UINT8_T, bNumEndpoints, ) \
m(n, UINT8_T, bInterfaceClass, ) \
m(n, UINT8_T, bInterfaceSubClass, ) \
m(n, UINT8_T, bInterfaceProtocol, ) \
m(n, UINT8_T, iInterface, ) \
LIBUSB20_MAKE_STRUCT(LIBUSB20_INTERFACE_DESC);
#define LIBUSB20_CONFIG_DESC(m,n) \
m(n, UINT8_T, bLength, ) \
m(n, UINT8_T, bDescriptorType, ) \
m(n, UINT16_T, wTotalLength, ) \
m(n, UINT8_T, bNumInterfaces, ) \
m(n, UINT8_T, bConfigurationValue, ) \
m(n, UINT8_T, iConfiguration, ) \
m(n, UINT8_T, bmAttributes, ) \
m(n, UINT8_T, bMaxPower, ) \
LIBUSB20_MAKE_STRUCT(LIBUSB20_CONFIG_DESC);
#define LIBUSB20_CONTROL_SETUP(m,n) \
m(n, UINT8_T, bmRequestType, ) \
m(n, UINT8_T, bRequest, ) \
m(n, UINT16_T, wValue, ) \
m(n, UINT16_T, wIndex, ) \
m(n, UINT16_T, wLength, ) \
LIBUSB20_MAKE_STRUCT(LIBUSB20_CONTROL_SETUP);
#define LIBUSB20_SS_ENDPT_COMP_DESC(m,n) \
m(n, UINT8_T, bLength, ) \
m(n, UINT8_T, bDescriptorType, ) \
m(n, UINT8_T, bMaxBurst, ) \
m(n, UINT8_T, bmAttributes, ) \
m(n, UINT16_T, wBytesPerInterval, ) \
LIBUSB20_MAKE_STRUCT(LIBUSB20_SS_ENDPT_COMP_DESC);
#define LIBUSB20_USB_20_DEVCAP_DESC(m,n) \
m(n, UINT8_T, bLength, ) \
m(n, UINT8_T, bDescriptorType, ) \
m(n, UINT8_T, bDevCapabilityType, ) \
m(n, UINT32_T, bmAttributes, ) \
LIBUSB20_MAKE_STRUCT(LIBUSB20_USB_20_DEVCAP_DESC);
#define LIBUSB20_SS_USB_DEVCAP_DESC(m,n) \
m(n, UINT8_T, bLength, ) \
m(n, UINT8_T, bDescriptorType, ) \
m(n, UINT8_T, bDevCapabilityType, ) \
m(n, UINT8_T, bmAttributes, ) \
m(n, UINT16_T, wSpeedSupported, ) \
m(n, UINT8_T, bFunctionalitySupport, ) \
m(n, UINT8_T, bU1DevExitLat, ) \
m(n, UINT16_T, wU2DevExitLat, ) \
LIBUSB20_MAKE_STRUCT(LIBUSB20_SS_USB_DEVCAP_DESC);
#define LIBUSB20_BOS_DESCRIPTOR(m,n) \
m(n, UINT8_T, bLength, ) \
m(n, UINT8_T, bDescriptorType, ) \
m(n, UINT16_T, wTotalLength, ) \
m(n, UINT8_T, bNumDeviceCapabilities, ) \
LIBUSB20_MAKE_STRUCT(LIBUSB20_BOS_DESCRIPTOR);
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
/* standard USB stuff */
/** \ingroup desc
* Device and/or Interface Class codes */
enum libusb20_class_code {
/** In the context of a \ref LIBUSB20_DEVICE_DESC "device
* descriptor", this bDeviceClass value indicates that each
* interface specifies its own class information and all
* interfaces operate independently.
*/
LIBUSB20_CLASS_PER_INTERFACE = 0,
/** Audio class */
LIBUSB20_CLASS_AUDIO = 1,
/** Communications class */
LIBUSB20_CLASS_COMM = 2,
/** Human Interface Device class */
LIBUSB20_CLASS_HID = 3,
/** Printer dclass */
LIBUSB20_CLASS_PRINTER = 7,
/** Picture transfer protocol class */
LIBUSB20_CLASS_PTP = 6,
/** Mass storage class */
LIBUSB20_CLASS_MASS_STORAGE = 8,
/** Hub class */
LIBUSB20_CLASS_HUB = 9,
/** Data class */
LIBUSB20_CLASS_DATA = 10,
/** Class is vendor-specific */
LIBUSB20_CLASS_VENDOR_SPEC = 0xff,
};
/** \ingroup desc
* Descriptor types as defined by the USB specification. */
enum libusb20_descriptor_type {
/** Device descriptor. See LIBUSB20_DEVICE_DESC. */
LIBUSB20_DT_DEVICE = 0x01,
/** Configuration descriptor. See LIBUSB20_CONFIG_DESC. */
LIBUSB20_DT_CONFIG = 0x02,
/** String descriptor */
LIBUSB20_DT_STRING = 0x03,
/** Interface descriptor. See LIBUSB20_INTERFACE_DESC. */
LIBUSB20_DT_INTERFACE = 0x04,
/** Endpoint descriptor. See LIBUSB20_ENDPOINT_DESC. */
LIBUSB20_DT_ENDPOINT = 0x05,
/** HID descriptor */
LIBUSB20_DT_HID = 0x21,
/** HID report descriptor */
LIBUSB20_DT_REPORT = 0x22,
/** Physical descriptor */
LIBUSB20_DT_PHYSICAL = 0x23,
/** Hub descriptor */
LIBUSB20_DT_HUB = 0x29,
/** Binary Object Store, BOS */
LIBUSB20_DT_BOS = 0x0f,
/** Device Capability */
LIBUSB20_DT_DEVICE_CAPABILITY = 0x10,
/** SuperSpeed endpoint companion */
LIBUSB20_DT_SS_ENDPOINT_COMPANION = 0x30,
};
/** \ingroup desc
* Device capability types as defined by the USB specification. */
enum libusb20_device_capability_type {
LIBUSB20_WIRELESS_USB_DEVICE_CAPABILITY = 0x1,
LIBUSB20_USB_2_0_EXTENSION_DEVICE_CAPABILITY = 0x2,
LIBUSB20_SS_USB_DEVICE_CAPABILITY = 0x3,
LIBUSB20_CONTAINER_ID_DEVICE_CAPABILITY = 0x4,
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
};
/* Descriptor sizes per descriptor type */
#define LIBUSB20_DT_DEVICE_SIZE 18
#define LIBUSB20_DT_CONFIG_SIZE 9
#define LIBUSB20_DT_INTERFACE_SIZE 9
#define LIBUSB20_DT_ENDPOINT_SIZE 7
#define LIBUSB20_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */
#define LIBUSB20_DT_HUB_NONVAR_SIZE 7
#define LIBUSB20_DT_SS_ENDPOINT_COMPANION_SIZE 6
#define LIBUSB20_DT_BOS_SIZE 5
#define LIBUSB20_USB_2_0_EXTENSION_DEVICE_CAPABILITY_SIZE 7
#define LIBUSB20_SS_USB_DEVICE_CAPABILITY_SIZE 10
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
#define LIBUSB20_ENDPOINT_ADDRESS_MASK 0x0f /* in bEndpointAddress */
#define LIBUSB20_ENDPOINT_DIR_MASK 0x80
/** \ingroup desc
* Endpoint direction. Values for bit 7 of the
* \ref LIBUSB20_ENDPOINT_DESC::bEndpointAddress "endpoint address" scheme.
*/
enum libusb20_endpoint_direction {
/** In: device-to-host */
LIBUSB20_ENDPOINT_IN = 0x80,
/** Out: host-to-device */
LIBUSB20_ENDPOINT_OUT = 0x00,
};
#define LIBUSB20_TRANSFER_TYPE_MASK 0x03 /* in bmAttributes */
/** \ingroup desc
* Endpoint transfer type. Values for bits 0:1 of the
* \ref LIBUSB20_ENDPOINT_DESC::bmAttributes "endpoint attributes" field.
*/
enum libusb20_transfer_type {
/** Control endpoint */
LIBUSB20_TRANSFER_TYPE_CONTROL = 0,
/** Isochronous endpoint */
LIBUSB20_TRANSFER_TYPE_ISOCHRONOUS = 1,
/** Bulk endpoint */
LIBUSB20_TRANSFER_TYPE_BULK = 2,
/** Interrupt endpoint */
LIBUSB20_TRANSFER_TYPE_INTERRUPT = 3,
};
/** \ingroup misc
* Standard requests, as defined in table 9-3 of the USB2 specifications */
enum libusb20_standard_request {
/** Request status of the specific recipient */
LIBUSB20_REQUEST_GET_STATUS = 0x00,
/** Clear or disable a specific feature */
LIBUSB20_REQUEST_CLEAR_FEATURE = 0x01,
/* 0x02 is reserved */
/** Set or enable a specific feature */
LIBUSB20_REQUEST_SET_FEATURE = 0x03,
/* 0x04 is reserved */
/** Set device address for all future accesses */
LIBUSB20_REQUEST_SET_ADDRESS = 0x05,
/** Get the specified descriptor */
LIBUSB20_REQUEST_GET_DESCRIPTOR = 0x06,
/** Used to update existing descriptors or add new descriptors */
LIBUSB20_REQUEST_SET_DESCRIPTOR = 0x07,
/** Get the current device configuration value */
LIBUSB20_REQUEST_GET_CONFIGURATION = 0x08,
/** Set device configuration */
LIBUSB20_REQUEST_SET_CONFIGURATION = 0x09,
/** Return the selected alternate setting for the specified
* interface */
LIBUSB20_REQUEST_GET_INTERFACE = 0x0A,
/** Select an alternate interface for the specified interface */
LIBUSB20_REQUEST_SET_INTERFACE = 0x0B,
/** Set then report an endpoint's synchronization frame */
LIBUSB20_REQUEST_SYNCH_FRAME = 0x0C,
/** Set U1 and U2 system exit latency */
LIBUSB20_REQUEST_SET_SEL = 0x30,
/** Set isochronous delay */
LIBUSB20_REQUEST_SET_ISOCH_DELAY = 0x31,
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
};
/** \ingroup misc
* Request type bits of the
* \ref libusb20_control_setup::bmRequestType "bmRequestType" field in
* control transfers. */
enum libusb20_request_type {
/** Standard */
LIBUSB20_REQUEST_TYPE_STANDARD = (0x00 << 5),
/** Class */
LIBUSB20_REQUEST_TYPE_CLASS = (0x01 << 5),
/** Vendor */
LIBUSB20_REQUEST_TYPE_VENDOR = (0x02 << 5),
/** Reserved */
LIBUSB20_REQUEST_TYPE_RESERVED = (0x03 << 5),
};
/** \ingroup misc
* Recipient bits of the
* \ref libusb20_control_setup::bmRequestType "bmRequestType" field in
* control transfers. Values 4 through 31 are reserved. */
enum libusb20_request_recipient {
/** Device */
LIBUSB20_RECIPIENT_DEVICE = 0x00,
/** Interface */
LIBUSB20_RECIPIENT_INTERFACE = 0x01,
/** Endpoint */
LIBUSB20_RECIPIENT_ENDPOINT = 0x02,
/** Other */
LIBUSB20_RECIPIENT_OTHER = 0x03,
};
#define LIBUSB20_ISO_SYNC_TYPE_MASK 0x0C
/** \ingroup desc
* Synchronization type for isochronous endpoints. Values for bits 2:3
* of the \ref LIBUSB20_ENDPOINT_DESC::bmAttributes "bmAttributes"
* field in LIBUSB20_ENDPOINT_DESC.
*/
enum libusb20_iso_sync_type {
/** No synchronization */
LIBUSB20_ISO_SYNC_TYPE_NONE = 0,
/** Asynchronous */
LIBUSB20_ISO_SYNC_TYPE_ASYNC = 1,
/** Adaptive */
LIBUSB20_ISO_SYNC_TYPE_ADAPTIVE = 2,
/** Synchronous */
LIBUSB20_ISO_SYNC_TYPE_SYNC = 3,
};
#define LIBUSB20_ISO_USAGE_TYPE_MASK 0x30
/** \ingroup desc
* Usage type for isochronous endpoints. Values for bits 4:5 of the
* \ref LIBUSB20_ENDPOINT_DESC::bmAttributes "bmAttributes" field in
* LIBUSB20_ENDPOINT_DESC.
*/
enum libusb20_iso_usage_type {
/** Data endpoint */
LIBUSB20_ISO_USAGE_TYPE_DATA = 0,
/** Feedback endpoint */
LIBUSB20_ISO_USAGE_TYPE_FEEDBACK = 1,
/** Implicit feedback Data endpoint */
LIBUSB20_ISO_USAGE_TYPE_IMPLICIT = 2,
};
struct libusb20_endpoint {
struct LIBUSB20_ENDPOINT_DESC_DECODED desc;
struct libusb20_me_struct extra;
} __aligned(sizeof(void *));
struct libusb20_interface {
struct LIBUSB20_INTERFACE_DESC_DECODED desc;
struct libusb20_me_struct extra;
struct libusb20_interface *altsetting;
struct libusb20_endpoint *endpoints;
uint8_t num_altsetting;
uint8_t num_endpoints;
} __aligned(sizeof(void *));
struct libusb20_config {
struct LIBUSB20_CONFIG_DESC_DECODED desc;
struct libusb20_me_struct extra;
struct libusb20_interface *interface;
uint8_t num_interface;
} __aligned(sizeof(void *));
uint8_t libusb20_me_get_1(const struct libusb20_me_struct *ie, uint16_t offset);
uint16_t libusb20_me_get_2(const struct libusb20_me_struct *ie, uint16_t offset);
uint16_t libusb20_me_encode(void *ptr, uint16_t len, const void *pd);
uint16_t libusb20_me_decode(const void *ptr, uint16_t len, void *pd);
const uint8_t *libusb20_desc_foreach(const struct libusb20_me_struct *pdesc, const uint8_t *psubdesc);
struct libusb20_config *libusb20_parse_config_desc(const void *config_desc);
#if 0
{ /* style */
#endif
#ifdef __cplusplus
}
#endif
#endif /* _LIBUSB20_DESC_H_ */