freebsd-dev/sys/net/if_fddisubr.c

671 lines
15 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1995, 1996
* Matt Thomas <matt@3am-software.com>. All rights reserved.
* Copyright (c) 1982, 1989, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
1995-03-14 22:15:36 +00:00
* from: if_ethersubr.c,v 1.5 1994/12/13 22:31:45 wollman Exp
1999-08-28 01:08:13 +00:00
* $FreeBSD$
*/
#include "opt_inet.h"
#include "opt_inet6.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/module.h>
#include <sys/socket.h>
#include <sys/sockio.h>
#include <net/if.h>
#include <net/if_var.h>
#include <net/if_dl.h>
2003-03-15 16:37:28 +00:00
#include <net/if_llc.h>
#include <net/if_types.h>
#include <net/if_llatbl.h>
2003-03-15 16:37:28 +00:00
#include <net/ethernet.h>
#include <net/netisr.h>
#include <net/route.h>
#include <net/bpf.h>
#include <net/fddi.h>
#if defined(INET) || defined(INET6)
#include <netinet/in.h>
#include <netinet/in_var.h>
#include <netinet/if_ether.h>
#endif
#ifdef INET6
#include <netinet6/nd6.h>
#endif
#ifdef DECNET
#include <netdnet/dn.h>
#endif
#include <security/mac/mac_framework.h>
static const u_char fddibroadcastaddr[FDDI_ADDR_LEN] =
{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
static int fddi_resolvemulti(struct ifnet *, struct sockaddr **,
struct sockaddr *);
static int fddi_output(struct ifnet *, struct mbuf *, const struct sockaddr *,
struct route *);
static void fddi_input(struct ifnet *ifp, struct mbuf *m);
#define senderr(e) do { error = (e); goto bad; } while (0)
/*
* FDDI output routine.
* Encapsulate a packet of type family for the local net.
* Use trailer local net encapsulation if enough data in first
* packet leaves a multiple of 512 bytes of data in remainder.
*/
static int
fddi_output(struct ifnet *ifp, struct mbuf *m, const struct sockaddr *dst,
struct route *ro)
{
u_int16_t type;
int loop_copy = 0, error = 0, hdrcmplt = 0;
u_char esrc[FDDI_ADDR_LEN], edst[FDDI_ADDR_LEN];
2002-03-29 07:12:10 +00:00
struct fddi_header *fh;
Simplify the way of attaching IPv6 link-layer header. Problem description: How do we currently perform layer 2 resolution and header imposition: For IPv4 we have the following chain: ip_output() -> (ether|atm|whatever)_output() -> arpresolve() Lookup is done in proper place (link-layer output routine) and it is possible to provide cached lle data. For IPv6 situation is more complex: ip6_output() -> nd6_output() -> nd6_output_ifp() -> (whatever)_output() -> nd6_storelladdr() We have ip6_ouput() which calls nd6_output() instead of link output routine. nd6_output() does the following: * checks if lle exists, creates it if needed (similar to arpresolve()) * performes lle state transitions (similar to arpresolve()) * calls nd6_output_ifp() which pushes packets to link output routine along with running SeND/MAC hooks regardless of lle state (e.g. works as run-hooks placeholder). After that, iface output routine like ether_output() calls nd6_storelladdr() which performs lle lookup once again. As a result, we perform lookup twice for each outgoing packet for most types of interfaces. We also need to maintain runtime-checked table of 'nd6-free' interfaces (see nd6_need_cache()). Fix this behavior by eliminating first ND lookup. To be more specific: * make all nd6_output() consumers use nd6_output_ifp() instead * rename nd6_output[_slow]() to nd6_resolve_[slow]() * convert nd6_resolve() and nd6_resolve_slow() to arpresolve() semantics, e.g. copy L2 address to buffer instead of pushing packet towards lower layers * Make all nd6_storelladdr() users use nd6_resolve() * eliminate nd6_storelladdr() The resulting callchain is the following: ip6_output() -> nd6_output_ifp() -> (whatever)_output() -> nd6_resolve() Error handling: Currently sending packet to non-existing la results in ip6_<output|forward> -> nd6_output() -> nd6_output _lle() which returns 0. In new scenario packet is propagated to <ether|whatever>_output() -> nd6_resolve() which will return EWOULDBLOCK, and that result will be converted to 0. (And EWOULDBLOCK is actually used by IB/TOE code). Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D1469
2015-09-16 14:26:28 +00:00
#if defined(INET) || defined(INET6)
int is_gw = 0;
#endif
#ifdef MAC
error = mac_ifnet_check_transmit(ifp, m);
if (error)
senderr(error);
#endif
if (ifp->if_flags & IFF_MONITOR)
senderr(ENETDOWN);
if (!((ifp->if_flags & IFF_UP) &&
(ifp->if_drv_flags & IFF_DRV_RUNNING)))
senderr(ENETDOWN);
getmicrotime(&ifp->if_lastchange);
Simplify the way of attaching IPv6 link-layer header. Problem description: How do we currently perform layer 2 resolution and header imposition: For IPv4 we have the following chain: ip_output() -> (ether|atm|whatever)_output() -> arpresolve() Lookup is done in proper place (link-layer output routine) and it is possible to provide cached lle data. For IPv6 situation is more complex: ip6_output() -> nd6_output() -> nd6_output_ifp() -> (whatever)_output() -> nd6_storelladdr() We have ip6_ouput() which calls nd6_output() instead of link output routine. nd6_output() does the following: * checks if lle exists, creates it if needed (similar to arpresolve()) * performes lle state transitions (similar to arpresolve()) * calls nd6_output_ifp() which pushes packets to link output routine along with running SeND/MAC hooks regardless of lle state (e.g. works as run-hooks placeholder). After that, iface output routine like ether_output() calls nd6_storelladdr() which performs lle lookup once again. As a result, we perform lookup twice for each outgoing packet for most types of interfaces. We also need to maintain runtime-checked table of 'nd6-free' interfaces (see nd6_need_cache()). Fix this behavior by eliminating first ND lookup. To be more specific: * make all nd6_output() consumers use nd6_output_ifp() instead * rename nd6_output[_slow]() to nd6_resolve_[slow]() * convert nd6_resolve() and nd6_resolve_slow() to arpresolve() semantics, e.g. copy L2 address to buffer instead of pushing packet towards lower layers * Make all nd6_storelladdr() users use nd6_resolve() * eliminate nd6_storelladdr() The resulting callchain is the following: ip6_output() -> nd6_output_ifp() -> (whatever)_output() -> nd6_resolve() Error handling: Currently sending packet to non-existing la results in ip6_<output|forward> -> nd6_output() -> nd6_output _lle() which returns 0. In new scenario packet is propagated to <ether|whatever>_output() -> nd6_resolve() which will return EWOULDBLOCK, and that result will be converted to 0. (And EWOULDBLOCK is actually used by IB/TOE code). Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D1469
2015-09-16 14:26:28 +00:00
#if defined(INET) || defined(INET6)
if (ro != NULL)
is_gw = (ro->ro_flags & RT_HAS_GW) != 0;
Simplify the way of attaching IPv6 link-layer header. Problem description: How do we currently perform layer 2 resolution and header imposition: For IPv4 we have the following chain: ip_output() -> (ether|atm|whatever)_output() -> arpresolve() Lookup is done in proper place (link-layer output routine) and it is possible to provide cached lle data. For IPv6 situation is more complex: ip6_output() -> nd6_output() -> nd6_output_ifp() -> (whatever)_output() -> nd6_storelladdr() We have ip6_ouput() which calls nd6_output() instead of link output routine. nd6_output() does the following: * checks if lle exists, creates it if needed (similar to arpresolve()) * performes lle state transitions (similar to arpresolve()) * calls nd6_output_ifp() which pushes packets to link output routine along with running SeND/MAC hooks regardless of lle state (e.g. works as run-hooks placeholder). After that, iface output routine like ether_output() calls nd6_storelladdr() which performs lle lookup once again. As a result, we perform lookup twice for each outgoing packet for most types of interfaces. We also need to maintain runtime-checked table of 'nd6-free' interfaces (see nd6_need_cache()). Fix this behavior by eliminating first ND lookup. To be more specific: * make all nd6_output() consumers use nd6_output_ifp() instead * rename nd6_output[_slow]() to nd6_resolve_[slow]() * convert nd6_resolve() and nd6_resolve_slow() to arpresolve() semantics, e.g. copy L2 address to buffer instead of pushing packet towards lower layers * Make all nd6_storelladdr() users use nd6_resolve() * eliminate nd6_storelladdr() The resulting callchain is the following: ip6_output() -> nd6_output_ifp() -> (whatever)_output() -> nd6_resolve() Error handling: Currently sending packet to non-existing la results in ip6_<output|forward> -> nd6_output() -> nd6_output _lle() which returns 0. In new scenario packet is propagated to <ether|whatever>_output() -> nd6_resolve() which will return EWOULDBLOCK, and that result will be converted to 0. (And EWOULDBLOCK is actually used by IB/TOE code). Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D1469
2015-09-16 14:26:28 +00:00
#endif
switch (dst->sa_family) {
#ifdef INET
case AF_INET: {
error = arpresolve(ifp, is_gw, m, dst, edst, NULL, NULL);
This commit does two things: 1. rt_check() cleanup: rt_check() is only necessary for some address families to gain access to the corresponding arp entry, so call it only in/near the *resolve() routines where it is actually used -- at the moment this is arpresolve(), nd6_storelladdr() (the call is embedded here), and atmresolve() (the call is just before atmresolve to reduce the number of changes). This change will make it a lot easier to decouple the arp table from the routing table. There is an extra call to rt_check() in if_iso88025subr.c to determine the routing info length. I have left it alone for the time being. The interface of arpresolve() and nd6_storelladdr() now changes slightly: + the 'rtentry' parameter (really a hint from the upper level layer) is now passed unchanged from *_output(), so it becomes the route to the final destination and not to the gateway. + the routines will return 0 if resolution is possible, non-zero otherwise. + arpresolve() returns EWOULDBLOCK in case the mbuf is being held waiting for an arp reply -- in this case the error code is masked in the caller so the upper layer protocol will not see a failure. 2. arpcom untangling Where possible, use 'struct ifnet' instead of 'struct arpcom' variables, and use the IFP2AC macro to access arpcom fields. This mostly affects the netatalk code. === Detailed changes: === net/if_arcsubr.c rt_check() cleanup, remove a useless variable net/if_atmsubr.c rt_check() cleanup net/if_ethersubr.c rt_check() cleanup, arpcom untangling net/if_fddisubr.c rt_check() cleanup, arpcom untangling net/if_iso88025subr.c rt_check() cleanup netatalk/aarp.c arpcom untangling, remove a block of duplicated code netatalk/at_extern.h arpcom untangling netinet/if_ether.c rt_check() cleanup (change arpresolve) netinet6/nd6.c rt_check() cleanup (change nd6_storelladdr)
2004-04-25 09:24:52 +00:00
if (error)
return (error == EWOULDBLOCK ? 0 : error);
type = htons(ETHERTYPE_IP);
break;
}
case AF_ARP:
{
struct arphdr *ah;
ah = mtod(m, struct arphdr *);
ah->ar_hrd = htons(ARPHRD_ETHER);
loop_copy = -1; /* if this is for us, don't do it */
switch (ntohs(ah->ar_op)) {
case ARPOP_REVREQUEST:
case ARPOP_REVREPLY:
type = htons(ETHERTYPE_REVARP);
break;
case ARPOP_REQUEST:
case ARPOP_REPLY:
default:
type = htons(ETHERTYPE_ARP);
break;
}
if (m->m_flags & M_BCAST)
bcopy(ifp->if_broadcastaddr, edst, FDDI_ADDR_LEN);
else
bcopy(ar_tha(ah), edst, FDDI_ADDR_LEN);
}
break;
2003-03-15 15:09:11 +00:00
#endif /* INET */
#ifdef INET6
case AF_INET6:
error = nd6_resolve(ifp, is_gw, m, dst, edst, NULL, NULL);
This commit does two things: 1. rt_check() cleanup: rt_check() is only necessary for some address families to gain access to the corresponding arp entry, so call it only in/near the *resolve() routines where it is actually used -- at the moment this is arpresolve(), nd6_storelladdr() (the call is embedded here), and atmresolve() (the call is just before atmresolve to reduce the number of changes). This change will make it a lot easier to decouple the arp table from the routing table. There is an extra call to rt_check() in if_iso88025subr.c to determine the routing info length. I have left it alone for the time being. The interface of arpresolve() and nd6_storelladdr() now changes slightly: + the 'rtentry' parameter (really a hint from the upper level layer) is now passed unchanged from *_output(), so it becomes the route to the final destination and not to the gateway. + the routines will return 0 if resolution is possible, non-zero otherwise. + arpresolve() returns EWOULDBLOCK in case the mbuf is being held waiting for an arp reply -- in this case the error code is masked in the caller so the upper layer protocol will not see a failure. 2. arpcom untangling Where possible, use 'struct ifnet' instead of 'struct arpcom' variables, and use the IFP2AC macro to access arpcom fields. This mostly affects the netatalk code. === Detailed changes: === net/if_arcsubr.c rt_check() cleanup, remove a useless variable net/if_atmsubr.c rt_check() cleanup net/if_ethersubr.c rt_check() cleanup, arpcom untangling net/if_fddisubr.c rt_check() cleanup, arpcom untangling net/if_iso88025subr.c rt_check() cleanup netatalk/aarp.c arpcom untangling, remove a block of duplicated code netatalk/at_extern.h arpcom untangling netinet/if_ether.c rt_check() cleanup (change arpresolve) netinet6/nd6.c rt_check() cleanup (change nd6_storelladdr)
2004-04-25 09:24:52 +00:00
if (error)
Simplify the way of attaching IPv6 link-layer header. Problem description: How do we currently perform layer 2 resolution and header imposition: For IPv4 we have the following chain: ip_output() -> (ether|atm|whatever)_output() -> arpresolve() Lookup is done in proper place (link-layer output routine) and it is possible to provide cached lle data. For IPv6 situation is more complex: ip6_output() -> nd6_output() -> nd6_output_ifp() -> (whatever)_output() -> nd6_storelladdr() We have ip6_ouput() which calls nd6_output() instead of link output routine. nd6_output() does the following: * checks if lle exists, creates it if needed (similar to arpresolve()) * performes lle state transitions (similar to arpresolve()) * calls nd6_output_ifp() which pushes packets to link output routine along with running SeND/MAC hooks regardless of lle state (e.g. works as run-hooks placeholder). After that, iface output routine like ether_output() calls nd6_storelladdr() which performs lle lookup once again. As a result, we perform lookup twice for each outgoing packet for most types of interfaces. We also need to maintain runtime-checked table of 'nd6-free' interfaces (see nd6_need_cache()). Fix this behavior by eliminating first ND lookup. To be more specific: * make all nd6_output() consumers use nd6_output_ifp() instead * rename nd6_output[_slow]() to nd6_resolve_[slow]() * convert nd6_resolve() and nd6_resolve_slow() to arpresolve() semantics, e.g. copy L2 address to buffer instead of pushing packet towards lower layers * Make all nd6_storelladdr() users use nd6_resolve() * eliminate nd6_storelladdr() The resulting callchain is the following: ip6_output() -> nd6_output_ifp() -> (whatever)_output() -> nd6_resolve() Error handling: Currently sending packet to non-existing la results in ip6_<output|forward> -> nd6_output() -> nd6_output _lle() which returns 0. In new scenario packet is propagated to <ether|whatever>_output() -> nd6_resolve() which will return EWOULDBLOCK, and that result will be converted to 0. (And EWOULDBLOCK is actually used by IB/TOE code). Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D1469
2015-09-16 14:26:28 +00:00
return (error == EWOULDBLOCK ? 0 : error);
type = htons(ETHERTYPE_IPV6);
break;
2003-03-15 15:09:11 +00:00
#endif /* INET6 */
case pseudo_AF_HDRCMPLT:
{
const struct ether_header *eh;
hdrcmplt = 1;
eh = (const struct ether_header *)dst->sa_data;
bcopy(eh->ether_shost, esrc, FDDI_ADDR_LEN);
/* FALLTHROUGH */
}
case AF_UNSPEC:
{
const struct ether_header *eh;
loop_copy = -1;
eh = (const struct ether_header *)dst->sa_data;
bcopy(eh->ether_dhost, edst, FDDI_ADDR_LEN);
if (*edst & 1)
m->m_flags |= (M_BCAST|M_MCAST);
type = eh->ether_type;
break;
}
case AF_IMPLINK:
{
fh = mtod(m, struct fddi_header *);
error = EPROTONOSUPPORT;
switch (fh->fddi_fc & (FDDIFC_C|FDDIFC_L|FDDIFC_F)) {
case FDDIFC_LLC_ASYNC: {
/* legal priorities are 0 through 7 */
if ((fh->fddi_fc & FDDIFC_Z) > 7)
goto bad;
break;
}
case FDDIFC_LLC_SYNC: {
/* FDDIFC_Z bits reserved, must be zero */
if (fh->fddi_fc & FDDIFC_Z)
goto bad;
break;
}
case FDDIFC_SMT: {
/* FDDIFC_Z bits must be non zero */
if ((fh->fddi_fc & FDDIFC_Z) == 0)
goto bad;
break;
}
default: {
/* anything else is too dangerous */
goto bad;
}
}
error = 0;
if (fh->fddi_dhost[0] & 1)
m->m_flags |= (M_BCAST|M_MCAST);
goto queue_it;
}
default:
if_printf(ifp, "can't handle af%d\n", dst->sa_family);
senderr(EAFNOSUPPORT);
}
/*
* Add LLC header.
*/
if (type != 0) {
2002-03-29 07:12:10 +00:00
struct llc *l;
M_PREPEND(m, LLC_SNAPFRAMELEN, M_NOWAIT);
if (m == NULL)
senderr(ENOBUFS);
l = mtod(m, struct llc *);
l->llc_control = LLC_UI;
l->llc_dsap = l->llc_ssap = LLC_SNAP_LSAP;
2003-03-15 15:09:11 +00:00
l->llc_snap.org_code[0] =
l->llc_snap.org_code[1] =
l->llc_snap.org_code[2] = 0;
l->llc_snap.ether_type = htons(type);
}
/*
* Add local net header. If no space in first mbuf,
* allocate another.
*/
M_PREPEND(m, FDDI_HDR_LEN, M_NOWAIT);
if (m == NULL)
senderr(ENOBUFS);
fh = mtod(m, struct fddi_header *);
fh->fddi_fc = FDDIFC_LLC_ASYNC|FDDIFC_LLC_PRIO4;
bcopy((caddr_t)edst, (caddr_t)fh->fddi_dhost, FDDI_ADDR_LEN);
queue_it:
if (hdrcmplt)
bcopy((caddr_t)esrc, (caddr_t)fh->fddi_shost, FDDI_ADDR_LEN);
else
bcopy(IF_LLADDR(ifp), (caddr_t)fh->fddi_shost,
FDDI_ADDR_LEN);
/*
* If a simplex interface, and the packet is being sent to our
* Ethernet address or a broadcast address, loopback a copy.
* XXX To make a simplex device behave exactly like a duplex
* device, we should copy in the case of sending to our own
* ethernet address (thus letting the original actually appear
* on the wire). However, we don't do that here for security
* reasons and compatibility with the original behavior.
*/
if ((ifp->if_flags & IFF_SIMPLEX) && (loop_copy != -1)) {
2003-03-15 19:37:44 +00:00
if ((m->m_flags & M_BCAST) || (loop_copy > 0)) {
struct mbuf *n;
n = m_copy(m, 0, (int)M_COPYALL);
(void) if_simloop(ifp, n, dst->sa_family,
FDDI_HDR_LEN);
} else if (bcmp(fh->fddi_dhost, fh->fddi_shost,
FDDI_ADDR_LEN) == 0) {
(void) if_simloop(ifp, m, dst->sa_family,
FDDI_HDR_LEN);
return (0); /* XXX */
}
}
error = (ifp->if_transmit)(ifp, m);
if (error)
if_inc_counter(ifp, IFCOUNTER_OERRORS, 1);
return (error);
bad:
if_inc_counter(ifp, IFCOUNTER_OERRORS, 1);
if (m)
m_freem(m);
return (error);
}
/*
* Process a received FDDI packet.
*/
static void
fddi_input(ifp, m)
struct ifnet *ifp;
struct mbuf *m;
{
int isr;
2002-03-29 07:12:10 +00:00
struct llc *l;
struct fddi_header *fh;
/*
* Do consistency checks to verify assumptions
* made by code past this point.
*/
if ((m->m_flags & M_PKTHDR) == 0) {
if_printf(ifp, "discard frame w/o packet header\n");
if_inc_counter(ifp, IFCOUNTER_IERRORS, 1);
m_freem(m);
return;
}
if (m->m_pkthdr.rcvif == NULL) {
if_printf(ifp, "discard frame w/o interface pointer\n");
if_inc_counter(ifp, IFCOUNTER_IERRORS, 1);
m_freem(m);
return;
}
m = m_pullup(m, FDDI_HDR_LEN);
if (m == NULL) {
if_inc_counter(ifp, IFCOUNTER_IERRORS, 1);
goto dropanyway;
}
fh = mtod(m, struct fddi_header *);
/*
* Discard packet if interface is not up.
*/
if (!((ifp->if_flags & IFF_UP) &&
(ifp->if_drv_flags & IFF_DRV_RUNNING)))
goto dropanyway;
/*
* Give bpf a chance at the packet.
*/
BPF_MTAP(ifp, m);
/*
* Interface marked for monitoring; discard packet.
*/
if (ifp->if_flags & IFF_MONITOR) {
m_freem(m);
return;
}
#ifdef MAC
mac_ifnet_create_mbuf(ifp, m);
#endif
/*
* Update interface statistics.
*/
if_inc_counter(ifp, IFCOUNTER_IBYTES, m->m_pkthdr.len);
getmicrotime(&ifp->if_lastchange);
/*
* Discard non local unicast packets when interface
* is in promiscuous mode.
*/
if ((ifp->if_flags & IFF_PROMISC) && ((fh->fddi_dhost[0] & 1) == 0) &&
(bcmp(IF_LLADDR(ifp), (caddr_t)fh->fddi_dhost,
FDDI_ADDR_LEN) != 0))
goto dropanyway;
/*
* Set mbuf flags for bcast/mcast.
*/
if (fh->fddi_dhost[0] & 1) {
if (bcmp(ifp->if_broadcastaddr, fh->fddi_dhost,
FDDI_ADDR_LEN) == 0)
m->m_flags |= M_BCAST;
else
m->m_flags |= M_MCAST;
if_inc_counter(ifp, IFCOUNTER_IMCASTS, 1);
}
#ifdef M_LINK0
/*
* If this has a LLC priority of 0, then mark it so upper
* layers have a hint that it really came via a FDDI/Ethernet
* bridge.
*/
if ((fh->fddi_fc & FDDIFC_LLC_PRIO7) == FDDIFC_LLC_PRIO0)
m->m_flags |= M_LINK0;
#endif
/* Strip off FDDI header. */
m_adj(m, FDDI_HDR_LEN);
m = m_pullup(m, LLC_SNAPFRAMELEN);
if (m == 0) {
if_inc_counter(ifp, IFCOUNTER_IERRORS, 1);
goto dropanyway;
}
l = mtod(m, struct llc *);
switch (l->llc_dsap) {
case LLC_SNAP_LSAP:
{
u_int16_t type;
2003-03-15 15:09:11 +00:00
if ((l->llc_control != LLC_UI) ||
(l->llc_ssap != LLC_SNAP_LSAP)) {
if_inc_counter(ifp, IFCOUNTER_NOPROTO, 1);
goto dropanyway;
}
if (l->llc_snap.org_code[0] != 0 ||
l->llc_snap.org_code[1] != 0 ||
l->llc_snap.org_code[2] != 0) {
if_inc_counter(ifp, IFCOUNTER_NOPROTO, 1);
goto dropanyway;
}
type = ntohs(l->llc_snap.ether_type);
m_adj(m, LLC_SNAPFRAMELEN);
switch (type) {
#ifdef INET
case ETHERTYPE_IP:
isr = NETISR_IP;
break;
case ETHERTYPE_ARP:
if (ifp->if_flags & IFF_NOARP)
goto dropanyway;
isr = NETISR_ARP;
break;
#endif
#ifdef INET6
case ETHERTYPE_IPV6:
isr = NETISR_IPV6;
break;
#endif
#ifdef DECNET
case ETHERTYPE_DECNET:
isr = NETISR_DECNET;
break;
#endif
default:
/* printf("fddi_input: unknown protocol 0x%x\n", type); */
if_inc_counter(ifp, IFCOUNTER_NOPROTO, 1);
goto dropanyway;
}
break;
}
default:
/* printf("fddi_input: unknown dsap 0x%x\n", l->llc_dsap); */
if_inc_counter(ifp, IFCOUNTER_NOPROTO, 1);
goto dropanyway;
}
M_SETFIB(m, ifp->if_fib);
netisr_dispatch(isr, m);
return;
dropanyway:
if_inc_counter(ifp, IFCOUNTER_IQDROPS, 1);
if (m)
m_freem(m);
return;
}
/*
* Perform common duties while attaching to interface list
*/
void
fddi_ifattach(ifp, lla, bpf)
2002-03-29 07:12:10 +00:00
struct ifnet *ifp;
const u_int8_t *lla;
int bpf;
{
2002-03-29 07:12:10 +00:00
struct ifaddr *ifa;
struct sockaddr_dl *sdl;
ifp->if_type = IFT_FDDI;
ifp->if_addrlen = FDDI_ADDR_LEN;
ifp->if_hdrlen = 21;
if_attach(ifp); /* Must be called before additional assignments */
ifp->if_mtu = FDDIMTU;
ifp->if_output = fddi_output;
ifp->if_input = fddi_input;
ifp->if_resolvemulti = fddi_resolvemulti;
ifp->if_broadcastaddr = fddibroadcastaddr;
ifp->if_baudrate = 100000000;
#ifdef IFF_NOTRAILERS
ifp->if_flags |= IFF_NOTRAILERS;
#endif
ifa = ifp->if_addr;
KASSERT(ifa != NULL, ("%s: no lladdr!\n", __func__));
sdl = (struct sockaddr_dl *)ifa->ifa_addr;
sdl->sdl_type = IFT_FDDI;
sdl->sdl_alen = ifp->if_addrlen;
bcopy(lla, LLADDR(sdl), ifp->if_addrlen);
if (bpf)
bpfattach(ifp, DLT_FDDI, FDDI_HDR_LEN);
return;
}
void
fddi_ifdetach(ifp, bpf)
struct ifnet *ifp;
int bpf;
{
if (bpf)
bpfdetach(ifp);
if_detach(ifp);
return;
}
int
fddi_ioctl (ifp, command, data)
struct ifnet *ifp;
u_long command;
caddr_t data;
{
struct ifaddr *ifa;
struct ifreq *ifr;
int error;
ifa = (struct ifaddr *) data;
ifr = (struct ifreq *) data;
error = 0;
switch (command) {
case SIOCSIFADDR:
ifp->if_flags |= IFF_UP;
switch (ifa->ifa_addr->sa_family) {
#ifdef INET
case AF_INET: /* before arpwhohas */
ifp->if_init(ifp->if_softc);
arp_ifinit(ifp, ifa);
break;
#endif
default:
ifp->if_init(ifp->if_softc);
break;
}
break;
case SIOCGIFADDR: {
struct sockaddr *sa;
sa = (struct sockaddr *) & ifr->ifr_data;
bcopy(IF_LLADDR(ifp),
(caddr_t) sa->sa_data, FDDI_ADDR_LEN);
}
break;
case SIOCSIFMTU:
/*
* Set the interface MTU.
*/
if (ifr->ifr_mtu > FDDIMTU) {
error = EINVAL;
} else {
ifp->if_mtu = ifr->ifr_mtu;
}
break;
default:
error = EINVAL;
break;
}
return (error);
}
static int
fddi_resolvemulti(ifp, llsa, sa)
struct ifnet *ifp;
struct sockaddr **llsa;
struct sockaddr *sa;
{
struct sockaddr_dl *sdl;
#ifdef INET
struct sockaddr_in *sin;
#endif
#ifdef INET6
struct sockaddr_in6 *sin6;
#endif
u_char *e_addr;
switch(sa->sa_family) {
case AF_LINK:
/*
* No mapping needed. Just check that it's a valid MC address.
*/
sdl = (struct sockaddr_dl *)sa;
e_addr = LLADDR(sdl);
if ((e_addr[0] & 1) != 1)
return (EADDRNOTAVAIL);
*llsa = NULL;
return (0);
#ifdef INET
case AF_INET:
sin = (struct sockaddr_in *)sa;
if (!IN_MULTICAST(ntohl(sin->sin_addr.s_addr)))
return (EADDRNOTAVAIL);
sdl = link_init_sdl(ifp, *llsa, IFT_FDDI);
sdl->sdl_nlen = 0;
sdl->sdl_alen = FDDI_ADDR_LEN;
sdl->sdl_slen = 0;
e_addr = LLADDR(sdl);
ETHER_MAP_IP_MULTICAST(&sin->sin_addr, e_addr);
*llsa = (struct sockaddr *)sdl;
return (0);
#endif
#ifdef INET6
case AF_INET6:
sin6 = (struct sockaddr_in6 *)sa;
if (IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr)) {
/*
* An IP6 address of 0 means listen to all
* of the Ethernet multicast address used for IP6.
* (This is used for multicast routers.)
*/
ifp->if_flags |= IFF_ALLMULTI;
*llsa = NULL;
return (0);
}
if (!IN6_IS_ADDR_MULTICAST(&sin6->sin6_addr))
return (EADDRNOTAVAIL);
sdl = link_init_sdl(ifp, *llsa, IFT_FDDI);
sdl->sdl_nlen = 0;
sdl->sdl_alen = FDDI_ADDR_LEN;
sdl->sdl_slen = 0;
e_addr = LLADDR(sdl);
ETHER_MAP_IPV6_MULTICAST(&sin6->sin6_addr, e_addr);
*llsa = (struct sockaddr *)sdl;
return (0);
#endif
default:
/*
* Well, the text isn't quite right, but it's the name
* that counts...
*/
return (EAFNOSUPPORT);
}
return (0);
}
static moduledata_t fddi_mod = {
"fddi", /* module name */
NULL, /* event handler */
0 /* extra data */
};
DECLARE_MODULE(fddi, fddi_mod, SI_SUB_PSEUDO, SI_ORDER_ANY);
MODULE_VERSION(fddi, 1);