freebsd-dev/sys/conf/Makefile.alpha

355 lines
9.9 KiB
Makefile
Raw Normal View History

# Makefile.alpha -- with config changes.
# Copyright 1990 W. Jolitz
# from: @(#)Makefile.alpha 7.1 5/10/91
1999-08-28 01:08:13 +00:00
# $FreeBSD$
#
# Makefile for FreeBSD
#
# This makefile is constructed from a machine description:
# config machineid
# Most changes should be made in the machine description
# /sys/alpha/conf/``machineid''
# after which you should do
# config machineid
# Generic makefile changes should be made in
# /sys/alpha/conf/Makefile.alpha
# after which config should be rerun for all machines.
#
# Which version of config(8) is required.
Borrow phk's axe and apply the next stage of config(8)'s evolution. Use Warner Losh's "hint" driver to decode ascii strings to fill the resource table at boot time. config(8) no longer generates an ioconf.c table - ie: the configuration no longer has to be compiled into the kernel. You can reconfigure your isa devices with the likes of this at loader(8) time: set hint.ed.0.port=0x320 userconfig will be rewritten to use this style interface one day and will move to /boot/userconfig.4th or something like that. It is still possible to statically compile in a set of hints into a kernel if you do not wish to use loader(8). See the "hints" directive in GENERIC as an example. All device wiring has been moved out of config(8). There is a set of helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98) that extract the 'at isa? port foo irq bar' from the old files and produces a hints file. If you install this file as /boot/device.hints (and update /boot/defaults/loader.conf - You can do a build/install in sys/boot) then loader will load it automatically for you. You can also compile in the hints directly with: hints "device.hints" as well. There are a few things that I'm not too happy with yet. Under this scheme, things like LINT would no longer be useful as "documentation" of settings. I have renamed this file to 'NOTES' and stored the example hints strings in it. However... this is not something that config(8) understands, so there is a script that extracts the build-specific data from the documentation file (NOTES) to produce a LINT that can be config'ed and built. A stack of man4 pages will need updating. :-/ Also, since there is no longer a difference between 'device' and 'pseudo-device' I collapsed the two together, and the resulting 'device' takes a 'number of units' for devices that still have it statically allocated. eg: 'device fe 4' will compile the fe driver with NFE set to 4. You can then set hints for 4 units (0 - 3). Also note that 'device fe0' will be interpreted as "zero units of 'fe'" which would be bad, so there is a config warning for this. This is only needed for old drivers that still have static limits on numbers of units. All the statically limited drivers that I could find were marked. Please exercise EXTREME CAUTION when transitioning! Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
%VERSREQ= 500002
# Can be overridden by makeoptions or /etc/make.conf
KERNEL?= kernel
STD8X16FONT?= iso
.if !defined(S)
.if exists(./@/.)
S= ./@
.else
S= ../..
.endif
.endif
M= ${MACHINE_ARCH}
SIZE?= size
OBJCOPY?= objcopy
COPTFLAGS?=-O
INCLUDES= -nostdinc -I- -I. -I$S
# This hack is to allow kernel compiles to succeed on machines w/out srcdist
.if exists($S/../include)
INCLUDES+= -I$S/../include
.else
INCLUDES+= -I/usr/include
.endif
COPTS= ${INCLUDES} ${IDENT} -D_KERNEL -include opt_global.h
CFLAGS= ${COPTFLAGS} ${CWARNFLAGS} ${DEBUG} ${COPTS}
# XXX LOCORE means "don't declare C stuff" not "for locore.s".
ASM_CFLAGS= -x assembler-with-cpp -DLOCORE ${CFLAGS}
# Select the correct set of tools. Can't set OBJFORMAT here because it
# doesn't get exported into the environment, and if it were exported
# then it might break building of utilities.
FMT= -elf
CFLAGS+= ${FMT}
DEFINED_PROF= ${PROF}
.if defined(PROF)
CFLAGS+= -malign-functions=4
.if ${PROFLEVEL} >= 2
IDENT+= -DGPROF4 -DGUPROF
PROF+= -mprofiler-epilogue
.endif
.endif
# Put configuration-specific C flags last (except for ${PROF}) so that they
# can override the others.
CFLAGS+= ${CONF_CFLAGS}
NORMAL_C= ${CC} -c ${CFLAGS} ${PROF} ${.IMPSRC}
NORMAL_C_C= ${CC} -c ${CFLAGS} ${PROF} ${.IMPSRC}
NORMAL_S= ${CC} -c ${ASM_CFLAGS} ${.IMPSRC}
PROFILE_C= ${CC} -c ${CFLAGS} ${.IMPSRC}
NORMAL_M= perl5 $S/kern/makeobjops.pl -c $<; \
${CC} -c ${CFLAGS} ${PROF} ${.PREFIX}.c
GEN_CFILES= $S/$M/$M/genassym.c
# setdef0.c and setdef1.c are intentionally
# omitted from SYSTEM_CFILES. They include setdefs.h, a header which
# is generated from all of ${OBJS}. We don't want to have to compile
# everything just to do a make depend.
Borrow phk's axe and apply the next stage of config(8)'s evolution. Use Warner Losh's "hint" driver to decode ascii strings to fill the resource table at boot time. config(8) no longer generates an ioconf.c table - ie: the configuration no longer has to be compiled into the kernel. You can reconfigure your isa devices with the likes of this at loader(8) time: set hint.ed.0.port=0x320 userconfig will be rewritten to use this style interface one day and will move to /boot/userconfig.4th or something like that. It is still possible to statically compile in a set of hints into a kernel if you do not wish to use loader(8). See the "hints" directive in GENERIC as an example. All device wiring has been moved out of config(8). There is a set of helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98) that extract the 'at isa? port foo irq bar' from the old files and produces a hints file. If you install this file as /boot/device.hints (and update /boot/defaults/loader.conf - You can do a build/install in sys/boot) then loader will load it automatically for you. You can also compile in the hints directly with: hints "device.hints" as well. There are a few things that I'm not too happy with yet. Under this scheme, things like LINT would no longer be useful as "documentation" of settings. I have renamed this file to 'NOTES' and stored the example hints strings in it. However... this is not something that config(8) understands, so there is a script that extracts the build-specific data from the documentation file (NOTES) to produce a LINT that can be config'ed and built. A stack of man4 pages will need updating. :-/ Also, since there is no longer a difference between 'device' and 'pseudo-device' I collapsed the two together, and the resulting 'device' takes a 'number of units' for devices that still have it statically allocated. eg: 'device fe 4' will compile the fe driver with NFE set to 4. You can then set hints for 4 units (0 - 3). Also note that 'device fe0' will be interpreted as "zero units of 'fe'" which would be bad, so there is a config warning for this. This is only needed for old drivers that still have static limits on numbers of units. All the statically limited drivers that I could find were marked. Please exercise EXTREME CAUTION when transitioning! Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
SYSTEM_CFILES= param.c vnode_if.c hints.c config.c
SYSTEM_SFILES= $S/$M/$M/locore.s
SYSTEM_DEP= Makefile ${SYSTEM_OBJS}
Borrow phk's axe and apply the next stage of config(8)'s evolution. Use Warner Losh's "hint" driver to decode ascii strings to fill the resource table at boot time. config(8) no longer generates an ioconf.c table - ie: the configuration no longer has to be compiled into the kernel. You can reconfigure your isa devices with the likes of this at loader(8) time: set hint.ed.0.port=0x320 userconfig will be rewritten to use this style interface one day and will move to /boot/userconfig.4th or something like that. It is still possible to statically compile in a set of hints into a kernel if you do not wish to use loader(8). See the "hints" directive in GENERIC as an example. All device wiring has been moved out of config(8). There is a set of helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98) that extract the 'at isa? port foo irq bar' from the old files and produces a hints file. If you install this file as /boot/device.hints (and update /boot/defaults/loader.conf - You can do a build/install in sys/boot) then loader will load it automatically for you. You can also compile in the hints directly with: hints "device.hints" as well. There are a few things that I'm not too happy with yet. Under this scheme, things like LINT would no longer be useful as "documentation" of settings. I have renamed this file to 'NOTES' and stored the example hints strings in it. However... this is not something that config(8) understands, so there is a script that extracts the build-specific data from the documentation file (NOTES) to produce a LINT that can be config'ed and built. A stack of man4 pages will need updating. :-/ Also, since there is no longer a difference between 'device' and 'pseudo-device' I collapsed the two together, and the resulting 'device' takes a 'number of units' for devices that still have it statically allocated. eg: 'device fe 4' will compile the fe driver with NFE set to 4. You can then set hints for 4 units (0 - 3). Also note that 'device fe0' will be interpreted as "zero units of 'fe'" which would be bad, so there is a config warning for this. This is only needed for old drivers that still have static limits on numbers of units. All the statically limited drivers that I could find were marked. Please exercise EXTREME CAUTION when transitioning! Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
SYSTEM_OBJS= locore.o setdef0.o vnode_if.o ${OBJS} param.o hints.o config.o \
setdef1.o hack.So
SYSTEM_LD= @${LD} ${FMT} -Bdynamic -T $S/conf/ldscript.$M \
-e locorestart \
-export-dynamic -dynamic-linker /red/herring \
-o ${.TARGET} -X ${SYSTEM_OBJS} vers.o
SYSTEM_LD_TAIL= @${OBJCOPY} --strip-symbol gcc2_compiled. ${.TARGET} ; \
${SIZE} ${FMT} ${.TARGET} ; chmod 755 ${.TARGET}
SYSTEM_DEP+= $S/conf/ldscript.$M
%BEFORE_DEPEND
%OBJS
%CFILES
%SFILES
%MFILES
%CLEAN
.PHONY: all modules
all: ${KERNEL}
depend: kernel-depend
clean: kernel-clean
cleandepend: kernel-cleandepend
tags: kernel-tags
install install.debug: kernel-install
reinstall reinstall.debug: kernel-reinstall
.if !defined(DEBUG)
FULLKERNEL= ${KERNEL}
.else
FULLKERNEL= ${KERNEL}.debug
${KERNEL}: ${FULLKERNEL}
${OBJCOPY} --strip-debug ${FULLKERNEL} ${KERNEL}
.endif
${FULLKERNEL}: ${SYSTEM_DEP} vers.o
@rm -f ${.TARGET}
@echo linking ${.TARGET}
${SYSTEM_LD}
${SYSTEM_LD_TAIL}
.if !exists(.depend)
${SYSTEM_OBJS}: vnode_if.h ${BEFORE_DEPEND:M*.h} ${MFILES:T:S/.m$/.h/}
.endif
.for mfile in ${MFILES}
${mfile:T:S/.m$/.h/}: ${mfile}
perl5 $S/kern/makeobjops.pl -h ${mfile}
.endfor
kernel-clean:
rm -f *.o *.so *.So *.ko *.s eddep errs \
${FULLKERNEL} ${KERNEL} linterrs makelinks param.c \
setdef[01].c setdefs.h tags \
vers.c vnode_if.c vnode_if.h \
${MFILES:T:S/.m$/.c/} ${MFILES:T:S/.m$/.h/} \
${CLEAN}
#lint: /tmp param.c
# @lint -hbxn -DGENERIC -Dvolatile= ${COPTS} \
Borrow phk's axe and apply the next stage of config(8)'s evolution. Use Warner Losh's "hint" driver to decode ascii strings to fill the resource table at boot time. config(8) no longer generates an ioconf.c table - ie: the configuration no longer has to be compiled into the kernel. You can reconfigure your isa devices with the likes of this at loader(8) time: set hint.ed.0.port=0x320 userconfig will be rewritten to use this style interface one day and will move to /boot/userconfig.4th or something like that. It is still possible to statically compile in a set of hints into a kernel if you do not wish to use loader(8). See the "hints" directive in GENERIC as an example. All device wiring has been moved out of config(8). There is a set of helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98) that extract the 'at isa? port foo irq bar' from the old files and produces a hints file. If you install this file as /boot/device.hints (and update /boot/defaults/loader.conf - You can do a build/install in sys/boot) then loader will load it automatically for you. You can also compile in the hints directly with: hints "device.hints" as well. There are a few things that I'm not too happy with yet. Under this scheme, things like LINT would no longer be useful as "documentation" of settings. I have renamed this file to 'NOTES' and stored the example hints strings in it. However... this is not something that config(8) understands, so there is a script that extracts the build-specific data from the documentation file (NOTES) to produce a LINT that can be config'ed and built. A stack of man4 pages will need updating. :-/ Also, since there is no longer a difference between 'device' and 'pseudo-device' I collapsed the two together, and the resulting 'device' takes a 'number of units' for devices that still have it statically allocated. eg: 'device fe 4' will compile the fe driver with NFE set to 4. You can then set hints for 4 units (0 - 3). Also note that 'device fe0' will be interpreted as "zero units of 'fe'" which would be bad, so there is a config warning for this. This is only needed for old drivers that still have static limits on numbers of units. All the statically limited drivers that I could find were marked. Please exercise EXTREME CAUTION when transitioning! Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
# $S/$M/$M/Locore.c ${CFILES} param.c | \
# grep -v 'struct/union .* never defined' | \
# grep -v 'possible pointer alignment problem'
locore.o: $S/$M/$M/locore.s assym.s
${NORMAL_S}
# This is a hack. BFD "optimizes" away dynamic mode if there are no
# dynamic references. We could probably do a '-Bforcedynamic' mode like
# in the a.out ld. For now, this works.
hack.So: Makefile
touch hack.c
${CC} ${FMT} -shared -nostdlib hack.c -o hack.So
rm -f hack.c
.ORDER: setdefs.h setdef0.c setdef1.c
setdef0.o: setdef0.c setdefs.h
${NORMAL_C}
setdef1.o: setdef1.c setdefs.h
${NORMAL_C}
setdef0.c setdef1.c setdefs.h: ${OBJS} param.o
@gensetdefs ${OBJS} param.o
# this rule stops ./assym.s in .depend from causing problems
./assym.s: assym.s
assym.s: $S/kern/genassym.sh genassym.o
sh $S/kern/genassym.sh genassym.o > ${.TARGET}
genassym.o: $S/$M/$M/genassym.c
${CC} -c ${CFLAGS} $S/$M/$M/genassym.c
SYSTEM_OBJS+= __divqu.o __divq.o __divlu.o __divl.o
SYSTEM_OBJS+= __remqu.o __remq.o __remlu.o __reml.o
CLEAN+= __divqu.S __divq.S __divlu.S __divl.S
CLEAN+= __remqu.S __remq.S __remlu.S __reml.S
__divqu.S: $S/$M/$M/divrem.m4
@echo 'building ${.TARGET} from ${.ALLSRC}'
@(echo "define(NAME,\`__divqu')define(OP,\`div')define(S,\`false')"; \
echo "define(WORDSIZE,64)"; cat ${.ALLSRC}) | m4 > ${.TARGET}
__divq.S: $S/$M/$M/divrem.m4
@echo 'building ${.TARGET} from ${.ALLSRC}'
@(echo "define(NAME,\`__divq')define(OP,\`div')define(S,\`true')"; \
echo "define(WORDSIZE,64)"; cat ${.ALLSRC}) | m4 > ${.TARGET}
__divlu.S: $S/$M/$M/divrem.m4
@echo 'building ${.TARGET} from ${.ALLSRC}'
@(echo "define(NAME,\`__divlu')define(OP,\`div')define(S,\`false')"; \
echo "define(WORDSIZE,32)"; cat ${.ALLSRC}) | m4 > ${.TARGET}
__divl.S: $S/$M/$M/divrem.m4
@echo 'building ${.TARGET} from ${.ALLSRC}'
@(echo "define(NAME,\`__divl')define(OP,\`div')define(S,\`true')"; \
echo "define(WORDSIZE,32)"; cat ${.ALLSRC}) | m4 > ${.TARGET}
__remqu.S: $S/$M/$M/divrem.m4
@echo 'building ${.TARGET} from ${.ALLSRC}'
@(echo "define(NAME,\`__remqu')define(OP,\`rem')define(S,\`false')"; \
echo "define(WORDSIZE,64)"; cat ${.ALLSRC}) | m4 > ${.TARGET}
__remq.S: $S/$M/$M/divrem.m4
@echo 'building ${.TARGET} from ${.ALLSRC}'
@(echo "define(NAME,\`__remq')define(OP,\`rem')define(S,\`true')"; \
echo "define(WORDSIZE,64)"; cat ${.ALLSRC}) | m4 > ${.TARGET}
__remlu.S: $S/$M/$M/divrem.m4
@echo 'building ${.TARGET} from ${.ALLSRC}'
@(echo "define(NAME,\`__remlu')define(OP,\`rem')define(S,\`false')"; \
echo "define(WORDSIZE,32)"; cat ${.ALLSRC}) | m4 > ${.TARGET}
__reml.S: $S/$M/$M/divrem.m4
@echo 'building ${.TARGET} from ${.ALLSRC}'
@(echo "define(NAME,\`__reml')define(OP,\`rem')define(S,\`true')"; \
echo "define(WORDSIZE,32)"; cat ${.ALLSRC}) | m4 > ${.TARGET}
${SYSTEM_OBJS} genassym.o vers.o: opt_global.h
kernel-depend: assym.s param.c vnode_if.h ${BEFORE_DEPEND} \
${CFILES} ${SYSTEM_CFILES} ${GEN_CFILES} ${SFILES} \
${SYSTEM_SFILES} ${MFILES:T:S/.m$/.h/}
rm -f .newdep
mkdep -a -f .newdep ${CFLAGS} ${CFILES} ${SYSTEM_CFILES} ${GEN_CFILES}
env MKDEP_CPP="${CC} -E" \
mkdep -a -f .newdep ${ASM_CFLAGS} ${SFILES} ${SYSTEM_SFILES}
rm -f .depend
mv -f .newdep .depend
kernel-cleandepend:
rm -f .depend
links:
egrep '#if' ${CFILES} | sed -f $S/conf/defines | \
sed -e 's/:.*//' -e 's/\.c/.o/' | sort -u > dontlink
echo ${CFILES} | tr -s ' ' '\12' | sed 's/\.c/.o/' | \
sort -u | comm -23 - dontlink | \
sed 's,../.*/\(.*.o\),rm -f \1;ln -s ../GENERIC/\1 \1,' > makelinks
sh makelinks && rm -f dontlink
kernel-tags:
@[ -f .depend ] || { echo "you must make depend first"; exit 1; }
sh $S/conf/systags.sh
rm -f tags1
sed -e 's, ../, ,' tags > tags1
kernel-install kernel-install.debug:
@if [ ! -f ${KERNEL}${.TARGET:S/kernel-install//} ] ; then \
1999-11-16 22:02:16 +00:00
echo "You must build a kernel first." ; \
exit 1 ; \
fi
.if exists(${DESTDIR}/${KERNEL})
-chflags noschg ${DESTDIR}/${KERNEL}
mv ${DESTDIR}/${KERNEL} ${DESTDIR}/${KERNEL}.old
.endif
install -c -m 555 -o root -g wheel -fschg \
${KERNEL}${.TARGET:S/kernel-install//} ${DESTDIR}/${KERNEL}
kernel-reinstall kernel-reinstall.debug:
install -c -m 555 -o root -g wheel -fschg \
${KERNEL}${.TARGET:S/kernel-reinstall//} ${DESTDIR}/${KERNEL}
.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists($S/modules)
all: modules
depend: modules-depend
clean: modules-clean
cleandepend: modules-cleandepend
tags: modules-tags
install install.debug: modules-install
reinstall reinstall.debug: modules-reinstall
.endif
modules:
@mkdir -p ${.OBJDIR}/modules
cd $S/modules && env MAKEOBJDIRPREFIX=${.OBJDIR}/modules ${MAKE} obj all
modules-depend:
@mkdir -p ${.OBJDIR}/modules
cd $S/modules && env MAKEOBJDIRPREFIX=${.OBJDIR}/modules ${MAKE} obj depend
modules-clean:
cd $S/modules && env MAKEOBJDIRPREFIX=${.OBJDIR}/modules ${MAKE} clean
modules-cleandepend:
cd $S/modules && env MAKEOBJDIRPREFIX=${.OBJDIR}/modules ${MAKE} cleandepend
modules-tags:
cd $S/modules && env MAKEOBJDIRPREFIX=${.OBJDIR}/modules ${MAKE} tags
modules-install modules-install.debug:
.if !defined(NO_MODULES_OLD)
if [ -d ${DESTDIR}/modules -a -n "`ls ${DESTDIR}/modules`" ]; then \
mkdir -p ${DESTDIR}/modules.old ; \
cp -p ${DESTDIR}/modules/* ${DESTDIR}/modules.old ; \
fi;
.endif
cd $S/modules && env MAKEOBJDIRPREFIX=${.OBJDIR}/modules ${MAKE} install
modules-reinstall modules-reinstall.debug:
cd $S/modules && env MAKEOBJDIRPREFIX=${.OBJDIR}/modules ${MAKE} install
config.o:
${NORMAL_C}
param.c: $S/conf/param.c
-rm -f param.c
cp $S/conf/param.c .
param.o:
${NORMAL_C}
vers.c: $S/conf/newvers.sh $S/sys/param.h ${SYSTEM_DEP}
sh $S/conf/newvers.sh ${KERN_IDENT} ${IDENT}
# XXX strictly, everything depends on Makefile because changes to ${PROF}
# only appear there, but we don't handle that.
vers.o:
${NORMAL_C}
Borrow phk's axe and apply the next stage of config(8)'s evolution. Use Warner Losh's "hint" driver to decode ascii strings to fill the resource table at boot time. config(8) no longer generates an ioconf.c table - ie: the configuration no longer has to be compiled into the kernel. You can reconfigure your isa devices with the likes of this at loader(8) time: set hint.ed.0.port=0x320 userconfig will be rewritten to use this style interface one day and will move to /boot/userconfig.4th or something like that. It is still possible to statically compile in a set of hints into a kernel if you do not wish to use loader(8). See the "hints" directive in GENERIC as an example. All device wiring has been moved out of config(8). There is a set of helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98) that extract the 'at isa? port foo irq bar' from the old files and produces a hints file. If you install this file as /boot/device.hints (and update /boot/defaults/loader.conf - You can do a build/install in sys/boot) then loader will load it automatically for you. You can also compile in the hints directly with: hints "device.hints" as well. There are a few things that I'm not too happy with yet. Under this scheme, things like LINT would no longer be useful as "documentation" of settings. I have renamed this file to 'NOTES' and stored the example hints strings in it. However... this is not something that config(8) understands, so there is a script that extracts the build-specific data from the documentation file (NOTES) to produce a LINT that can be config'ed and built. A stack of man4 pages will need updating. :-/ Also, since there is no longer a difference between 'device' and 'pseudo-device' I collapsed the two together, and the resulting 'device' takes a 'number of units' for devices that still have it statically allocated. eg: 'device fe 4' will compile the fe driver with NFE set to 4. You can then set hints for 4 units (0 - 3). Also note that 'device fe0' will be interpreted as "zero units of 'fe'" which would be bad, so there is a config warning for this. This is only needed for old drivers that still have static limits on numbers of units. All the statically limited drivers that I could find were marked. Please exercise EXTREME CAUTION when transitioning! Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
hints.o: hints.c
${NORMAL_C}
vnode_if.c: $S/kern/vnode_if.pl $S/kern/vnode_if.src
perl5 $S/kern/vnode_if.pl -c $S/kern/vnode_if.src
vnode_if.h: $S/kern/vnode_if.pl $S/kern/vnode_if.src
perl5 $S/kern/vnode_if.pl -h $S/kern/vnode_if.src
vnode_if.o:
${NORMAL_C}
.if exists($S/../share/mk)
.include "$S/../share/mk/bsd.kern.mk"
.else
.include <bsd.kern.mk>
.endif
%RULES
# DO NOT DELETE THIS LINE -- make depend uses it