d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
71e3c3083b
freebsd-dev/sys/sparc64/ebus/ebus.c

729 lines
21 KiB
C
Raw Normal View History

/* -> /*- for license, minor formatting changes
2005-01-07 02:29:27 +00:00
/*-
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
* Copyright (c) 1999, 2000 Matthew R. Green
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
* Copyright (c) 2009 by Marius Strobl <marius@FreeBSD.org>
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
Sync licenses and the corresponding RCS IDs with NetBSD, mainly switching the licenses of Matthew R. Green and the TNF to 2-clause. Obtained from: NetBSD
2011-03-12 14:33:32 +00:00
* from: NetBSD: ebus.c,v 1.52 2008/05/29 14:51:26 mrg Exp
*/
/*-
* Copyright (c) 2001 Thomas Moestl <tmm@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
*/
- Artificially using SYS_RES_IOPORT for EBus devices for reasons of compatibility with ISA devices while in fact all known EBus devices actually use memory space turned out to be not a good idea as so far there is only the 'rtc' device known to show up either on an EBus or ISA bus but not on any of the other busses used on sparc64. However there are quite a couple of them that show up on either EBus, FireHose or SBus. In order to save extra code in the respective drivers switch ebus(4) to actually use SYS_RES_MEMORY for the memory resources of its children. At least for transition still accept SYS_RES_IOPORT and silently change it to SYS_RES_MEMORY. [1] - In ebus_probe() use ofw_bus_get_name() instead of re-implementing it via ofw_bus_get_node() and OF_getprop(). - Remove some unused variables. - Use FBSDID. Discussed with: tmm (some time ago)
2005-05-19 18:11:46 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
/*
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
* Driver for JBus to EBus and PCI to EBus bridges
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
Add missing <sys/module.h> instances which were shadowed by the nested include in <sys/kernel.h>
2004-06-03 05:58:30 +00:00
#include <sys/module.h>
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
#include <sys/rman.h>
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
#include <dev/ofw/ofw_bus.h>
- Convert these bus drivers to make use of the newly introduced set of ofw_bus_gen_get_*() for providing the ofw_bus KOBJ interface in order to reduce code duplication. - While here sync the various sparc64 bus drivers a bit (handle failure to attach a child gracefully instead of panicing, move the printing of child resources common to bus_print_child() and bus_probe_nomatch() implementations of a bus into a <bus>_print_res() function, ...) and fix some minor bugs and nits (plug memory leaks present when attaching a bus or child device fails, remove unused struct members, ...). Additional testing by: kris (central(4) and fhc(4))
2005-11-22 16:39:44 +00:00
#include <dev/ofw/ofw_bus_subr.h>
s=include <ofw/=include <dev/ofw/= to reflect removal of -I$S/dev
2003-08-23 00:11:16 +00:00
#include <dev/ofw/openfirm.h>
Make the OpenFirmware interrupt mapping code more generic, to reduce the bus-dependent code and to be able to support more systems. The core of the new code is mostly obtained from NetBSD. Kluge the interrupt routing methods of the psycho and apb drivers so that an intline of 0 can be handled for now; real routing is still not possible (all intline registers are preinitialized instead); this will require a sparc64-specific adaption of the driver for generic PCI-PCI bridges with a custom routing method to work right.
2002-03-24 02:11:06 +00:00
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
#include <machine/bus.h>
#ifndef SUN4V
#include <machine/bus_common.h>
#endif
#include <machine/intr_machdep.h>
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
#include <machine/resource.h>
Prefer new location of pci include files (which have only been in the tree for two or more years now), except in a few places where there's code to be compatible with older versions of FreeBSD.
2003-08-22 07:39:05 +00:00
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
#include <sparc64/pci/ofw_pci.h>
/*
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
* The register, interrupt map and for the PCI variant also the ranges
* properties are identical to the ISA ones.
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
*/
#include <sparc64/isa/ofw_isa.h>
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
struct ebus_nexus_ranges {
uint32_t child_hi;
uint32_t child_lo;
uint32_t phys_hi;
uint32_t phys_lo;
uint32_t size;
};
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
struct ebus_devinfo {
- Convert these bus drivers to make use of the newly introduced set of ofw_bus_gen_get_*() for providing the ofw_bus KOBJ interface in order to reduce code duplication. - While here sync the various sparc64 bus drivers a bit (handle failure to attach a child gracefully instead of panicing, move the printing of child resources common to bus_print_child() and bus_probe_nomatch() implementations of a bus into a <bus>_print_res() function, ...) and fix some minor bugs and nits (plug memory leaks present when attaching a bus or child device fails, remove unused struct members, ...). Additional testing by: kris (central(4) and fhc(4))
2005-11-22 16:39:44 +00:00
struct ofw_bus_devinfo edi_obdinfo;
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
struct resource_list edi_rl;
};
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
struct ebus_rinfo {
int eri_rtype;
struct rman eri_rman;
struct resource *eri_res;
};
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
struct ebus_softc {
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
void *sc_range;
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
struct ebus_rinfo *sc_rinfo;
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
u_int sc_flags;
#define EBUS_PCI (1 << 0)
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
int sc_nrange;
Add the new sparc64 OFW PCI framework, conditional on options OFW_NEWPCI for now. It introduces a OFW PCI bus driver and a generic OFW PCI-PCI bridge driver. By utilizing these, the PCI handling is much more elegant now. The advantages of the new approach are: - Device enumeration should hopefully be more like on Solaris now, so unit numbers should match what's printed on the box more closely. - Real interrupt routing is implemented now, so cardbus bridges etc. have at least a chance to work. - The quirk tables are gone and have been replaced by (hopefully sufficient) heuristics. - Much cleaner code. There was also a report that previously bogus interrupt assignments are fixed now, which can be attributed to the new heuristics. A pitfall, and the reason why this is not the default yet, is that it changes device enumeration, as mentioned above, which can make it necessary to change the system configuration if more than one unit of a device type is present (on a system with two hme cars, for example, it is possible that hme0 becomes hme1 and vice versa after enabling the option). Systems with multiple disk controllers may need to be booted into single user (and require manual specification of the root file system on boot) to adjust the fstab. Nevertheless, I would like to encourage users to use this option, so that it can be made the default soon. In detail, the changes are: - Introduce an OFW PCI bus driver; it inherits most methods from the generic PCI bus driver, but uses the firmware for enumeration, performs additional initialization for devices and firmware-specific interrupt routing. It also implements an OFW-specific method to allow child devices to get their firmware nodes. - Introduce an OFW PCI-PCI bridge driver; again, it inherits most of the generic PCI-PCI bridge driver; it has it's own method for interrupt routing, as well as some sparc64-specific methods (one to get the node again, and one to adjust the bridge bus range, since we need to reenumerate all PCI buses). - Convert the apb driver to the new way of handling things. - Provide a common framework for OFW bridge drivers, used be the two drivers above. - Provide a small common framework for interrupt routing (for all bridge types). - Convert the psycho driver to the new framework; this gets rid of a bunch of old kludges in pci_read_config(), and the whole preinitialization (ofw_pci_init()). - Convert the ISA MD part and the EBus driver to the new way interrupts and nodes are handled. - Introduce types for firmware interrupt properties. - Rename the old sparcbus_if to ofw_pci_if by repo copy (it is only required for PCI), and move it to a more correct location (new support methodsx were also added, and an old one was deprecated). - Fix a bunch of minor bugs, perform some cleanups. In some cases, I introduced some minor code duplication to keep the new code clean, in hopes that the old code will be unifdef'ed soon. Reviewed in part by: imp Tested by: jake, Marius Strobl <marius@alchemy.franken.de>, Sergey Mokryshev <mokr@mokr.net>, Chris Jackman <cjackNOSPAM@klatsch.org> Info on u30 firmware provided by: kris
2003-07-01 14:52:47 +00:00
struct ofw_bus_iinfo sc_iinfo;
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
#ifndef SUN4V
uint32_t sc_ign;
#endif
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
};
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
static device_probe_t ebus_nexus_probe;
static device_attach_t ebus_nexus_attach;
static device_probe_t ebus_pci_probe;
static device_attach_t ebus_pci_attach;
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
static bus_print_child_t ebus_print_child;
static bus_probe_nomatch_t ebus_probe_nomatch;
static bus_alloc_resource_t ebus_alloc_resource;
Make sparc64 compatible with NEW_PCIB and enable it: - Implement bus_adjust_resource() methods as far as necessary and in non-PCI bridge drivers as far as feasible without rototilling them. - As NEW_PCIB does a layering violation by activating resources at layers above pci(4) without previously bubbling up their allocation there, move the assignment of bus tags and handles from the bus_alloc_resource() to the bus_activate_resource() methods like at least the other NEW_PCIB enabled architectures do. This is somewhat unfortunate as previously sparc64 (ab)used resource activation to indicate whether SYS_RES_MEMORY resources should be mapped into KVA, which is only necessary if their going to be accessed via the pointer returned from rman_get_virtual() but not for bus_space(9) as the later always uses physical access on sparc64. Besides wasting KVA if we always map in SYS_RES_MEMORY resources, a driver also may deliberately not map them in if the firmware already has done so, possibly in a special way. So in order to still allow a driver to decide whether a SYS_RES_MEMORY resource should be mapped into KVA we let it indicate that by calling bus_space_map(9) with BUS_SPACE_MAP_LINEAR as actually documented in the bus_space(9) page. This is implemented by allocating a separate bus tag per SYS_RES_MEMORY resource and passing the resource via the previously unused bus tag cookie so we later on can call rman_set_virtual() in sparc64_bus_mem_map(). As a side effect this now also allows to actually indicate that a SYS_RES_MEMORY resource should be mapped in as cacheable and/or read-only via BUS_SPACE_MAP_CACHEABLE and BUS_SPACE_MAP_READONLY respectively. - Do some minor cleanup like taking advantage of rman_init_from_resource(), factor out the common part of bus tag allocation into a newly added sparc64_alloc_bus_tag(), hook up some missing newbus methods and replace some homegrown versions with the generic counterparts etc. - While at it, let apb_attach() (which can't use the generic NEW_PCIB code as APB bridges just don't have the base and limit registers implemented) regarding the config space registers cached in pcib_softc and the SYSCTL reporting nodes set up.
2011-10-02 23:22:38 +00:00
static bus_activate_resource_t ebus_activate_resource;
static bus_adjust_resource_t ebus_adjust_resource;
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
static bus_release_resource_t ebus_release_resource;
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
static bus_setup_intr_t ebus_setup_intr;
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
static bus_get_resource_list_t ebus_get_resource_list;
- Convert these bus drivers to make use of the newly introduced set of ofw_bus_gen_get_*() for providing the ofw_bus KOBJ interface in order to reduce code duplication. - While here sync the various sparc64 bus drivers a bit (handle failure to attach a child gracefully instead of panicing, move the printing of child resources common to bus_print_child() and bus_probe_nomatch() implementations of a bus into a <bus>_print_res() function, ...) and fix some minor bugs and nits (plug memory leaks present when attaching a bus or child device fails, remove unused struct members, ...). Additional testing by: kris (central(4) and fhc(4))
2005-11-22 16:39:44 +00:00
static ofw_bus_get_devinfo_t ebus_get_devinfo;
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
static int ebus_attach(device_t dev, struct ebus_softc *sc, phandle_t node);
static struct ebus_devinfo *ebus_setup_dinfo(device_t dev,
struct ebus_softc *sc, phandle_t node);
static void ebus_destroy_dinfo(struct ebus_devinfo *edi);
static int ebus_print_res(struct ebus_devinfo *edi);
static devclass_t ebus_devclass;
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
static device_method_t ebus_nexus_methods[] = {
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
/* Device interface */
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
DEVMETHOD(device_probe, ebus_nexus_probe),
DEVMETHOD(device_attach, ebus_nexus_attach),
- Register the generic implementations for the device shutdown, suspend and resume methods so these events propagate through the device driver hierarchy. - In dma(4) enable the chaining of the DMA engine interrupt handler for the LANCE devices via a dma_setup_intr(). This was commented out before as I was unsure whether I'd use it but this is probably cleaner than fiddling with the DMA engine interrupt in the LANCE driver directly. - In ebus_setup_dinfo() free 'intrs' instead of 'reg' twice in case setting up a child fails due to routing one of its interrupts fails. [1] Found by: Coverity Prevent [1] MFC after: 3 days
2006-01-26 21:14:32 +00:00
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD(device_suspend, bus_generic_suspend),
DEVMETHOD(device_resume, bus_generic_resume),
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
/* Bus interface */
DEVMETHOD(bus_print_child, ebus_print_child),
DEVMETHOD(bus_probe_nomatch, ebus_probe_nomatch),
DEVMETHOD(bus_alloc_resource, ebus_alloc_resource),
Make sparc64 compatible with NEW_PCIB and enable it: - Implement bus_adjust_resource() methods as far as necessary and in non-PCI bridge drivers as far as feasible without rototilling them. - As NEW_PCIB does a layering violation by activating resources at layers above pci(4) without previously bubbling up their allocation there, move the assignment of bus tags and handles from the bus_alloc_resource() to the bus_activate_resource() methods like at least the other NEW_PCIB enabled architectures do. This is somewhat unfortunate as previously sparc64 (ab)used resource activation to indicate whether SYS_RES_MEMORY resources should be mapped into KVA, which is only necessary if their going to be accessed via the pointer returned from rman_get_virtual() but not for bus_space(9) as the later always uses physical access on sparc64. Besides wasting KVA if we always map in SYS_RES_MEMORY resources, a driver also may deliberately not map them in if the firmware already has done so, possibly in a special way. So in order to still allow a driver to decide whether a SYS_RES_MEMORY resource should be mapped into KVA we let it indicate that by calling bus_space_map(9) with BUS_SPACE_MAP_LINEAR as actually documented in the bus_space(9) page. This is implemented by allocating a separate bus tag per SYS_RES_MEMORY resource and passing the resource via the previously unused bus tag cookie so we later on can call rman_set_virtual() in sparc64_bus_mem_map(). As a side effect this now also allows to actually indicate that a SYS_RES_MEMORY resource should be mapped in as cacheable and/or read-only via BUS_SPACE_MAP_CACHEABLE and BUS_SPACE_MAP_READONLY respectively. - Do some minor cleanup like taking advantage of rman_init_from_resource(), factor out the common part of bus tag allocation into a newly added sparc64_alloc_bus_tag(), hook up some missing newbus methods and replace some homegrown versions with the generic counterparts etc. - While at it, let apb_attach() (which can't use the generic NEW_PCIB code as APB bridges just don't have the base and limit registers implemented) regarding the config space registers cached in pcib_softc and the SYSCTL reporting nodes set up.
2011-10-02 23:22:38 +00:00
DEVMETHOD(bus_activate_resource, ebus_activate_resource),
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
Make sparc64 compatible with NEW_PCIB and enable it: - Implement bus_adjust_resource() methods as far as necessary and in non-PCI bridge drivers as far as feasible without rototilling them. - As NEW_PCIB does a layering violation by activating resources at layers above pci(4) without previously bubbling up their allocation there, move the assignment of bus tags and handles from the bus_alloc_resource() to the bus_activate_resource() methods like at least the other NEW_PCIB enabled architectures do. This is somewhat unfortunate as previously sparc64 (ab)used resource activation to indicate whether SYS_RES_MEMORY resources should be mapped into KVA, which is only necessary if their going to be accessed via the pointer returned from rman_get_virtual() but not for bus_space(9) as the later always uses physical access on sparc64. Besides wasting KVA if we always map in SYS_RES_MEMORY resources, a driver also may deliberately not map them in if the firmware already has done so, possibly in a special way. So in order to still allow a driver to decide whether a SYS_RES_MEMORY resource should be mapped into KVA we let it indicate that by calling bus_space_map(9) with BUS_SPACE_MAP_LINEAR as actually documented in the bus_space(9) page. This is implemented by allocating a separate bus tag per SYS_RES_MEMORY resource and passing the resource via the previously unused bus tag cookie so we later on can call rman_set_virtual() in sparc64_bus_mem_map(). As a side effect this now also allows to actually indicate that a SYS_RES_MEMORY resource should be mapped in as cacheable and/or read-only via BUS_SPACE_MAP_CACHEABLE and BUS_SPACE_MAP_READONLY respectively. - Do some minor cleanup like taking advantage of rman_init_from_resource(), factor out the common part of bus tag allocation into a newly added sparc64_alloc_bus_tag(), hook up some missing newbus methods and replace some homegrown versions with the generic counterparts etc. - While at it, let apb_attach() (which can't use the generic NEW_PCIB code as APB bridges just don't have the base and limit registers implemented) regarding the config space registers cached in pcib_softc and the SYSCTL reporting nodes set up.
2011-10-02 23:22:38 +00:00
DEVMETHOD(bus_adjust_resource, ebus_adjust_resource),
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
DEVMETHOD(bus_release_resource, ebus_release_resource),
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
DEVMETHOD(bus_setup_intr, ebus_setup_intr),
- Sort device methods. - Take advantage of KOBJMETHOD_END.
2009-03-19 20:31:55 +00:00
DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
Now that all affected drivers have been changed remove the helpers for the SYS_RES_IOPORT -> SYS_RES_MEMORY transition again. While it was helpful to not need to change all of the affected drivers in a single pass together with ebus(4) we probably shouldn't start into 6.0 with such a hack. This requires some of the modules of affected drivers to be rebuilt, namely: auxio(4), snd_audiocs(4) and puc(4).
2005-06-04 20:31:20 +00:00
DEVMETHOD(bus_get_resource, bus_generic_rl_get_resource),
- Sort device methods. - Take advantage of KOBJMETHOD_END.
2009-03-19 20:31:55 +00:00
DEVMETHOD(bus_get_resource_list, ebus_get_resource_list),
Adapt parts of the sparc64 Open Firmware bus enumeration code (in particular, the code for parsing interrupt maps) to PowerPC and reflect their new MI status by moving them to the shared dev/ofw directory. This commit also modifies the OFW PCI enumeration procedure on PowerPC to allow the bus to find non-firmware-enumerated devices that Apple likes to add, and adds some useful Open Firmware properties (compat and name) to the pnpinfo string of children on OFW SBus, EBus, PCI, and MacIO links. Because of the change to PCI enumeration on PowerPC, X has started working again on PPC machines with Grackle hostbridges. Reviewed by: marius Obtained from: sparc64
2008-12-15 15:31:10 +00:00
DEVMETHOD(bus_child_pnpinfo_str, ofw_bus_gen_child_pnpinfo_str),
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
/* ofw_bus interface */
- Convert these bus drivers to make use of the newly introduced set of ofw_bus_gen_get_*() for providing the ofw_bus KOBJ interface in order to reduce code duplication. - While here sync the various sparc64 bus drivers a bit (handle failure to attach a child gracefully instead of panicing, move the printing of child resources common to bus_print_child() and bus_probe_nomatch() implementations of a bus into a <bus>_print_res() function, ...) and fix some minor bugs and nits (plug memory leaks present when attaching a bus or child device fails, remove unused struct members, ...). Additional testing by: kris (central(4) and fhc(4))
2005-11-22 16:39:44 +00:00
DEVMETHOD(ofw_bus_get_devinfo, ebus_get_devinfo),
DEVMETHOD(ofw_bus_get_compat, ofw_bus_gen_get_compat),
DEVMETHOD(ofw_bus_get_model, ofw_bus_gen_get_model),
DEVMETHOD(ofw_bus_get_name, ofw_bus_gen_get_name),
DEVMETHOD(ofw_bus_get_node, ofw_bus_gen_get_node),
DEVMETHOD(ofw_bus_get_type, ofw_bus_gen_get_type),
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
s,KOBJMETHOD_END,DEVMETHOD_END,g in order to fully hide the explicit mention of kobj(9) from device drivers.
2011-11-22 21:55:40 +00:00
DEVMETHOD_END
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
};
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
static driver_t ebus_nexus_driver = {
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
"ebus",
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
ebus_nexus_methods,
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
sizeof(struct ebus_softc),
};
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
/*
* NB: we rely on the interrupt controllers of the accompanying PCI-Express
* bridge to be registered as the nexus variant of the EBus bridges doesn't
* employ its own one.
*/
EARLY_DRIVER_MODULE(ebus, nexus, ebus_nexus_driver, ebus_devclass, 0, 0,
BUS_PASS_BUS + 1);
MODULE_DEPEND(ebus, nexus, 1, 1, 1);
static device_method_t ebus_pci_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, ebus_pci_probe),
DEVMETHOD(device_attach, ebus_pci_attach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD(device_suspend, bus_generic_suspend),
DEVMETHOD(device_resume, bus_generic_resume),
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
/* Bus interface */
DEVMETHOD(bus_print_child, ebus_print_child),
DEVMETHOD(bus_probe_nomatch, ebus_probe_nomatch),
DEVMETHOD(bus_alloc_resource, ebus_alloc_resource),
DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
DEVMETHOD(bus_release_resource, ebus_release_resource),
DEVMETHOD(bus_setup_intr, bus_generic_setup_intr),
DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
DEVMETHOD(bus_get_resource, bus_generic_rl_get_resource),
DEVMETHOD(bus_get_resource_list, ebus_get_resource_list),
DEVMETHOD(bus_child_pnpinfo_str, ofw_bus_gen_child_pnpinfo_str),
/* ofw_bus interface */
DEVMETHOD(ofw_bus_get_devinfo, ebus_get_devinfo),
DEVMETHOD(ofw_bus_get_compat, ofw_bus_gen_get_compat),
DEVMETHOD(ofw_bus_get_model, ofw_bus_gen_get_model),
DEVMETHOD(ofw_bus_get_name, ofw_bus_gen_get_name),
DEVMETHOD(ofw_bus_get_node, ofw_bus_gen_get_node),
DEVMETHOD(ofw_bus_get_type, ofw_bus_gen_get_type),
s,KOBJMETHOD_END,DEVMETHOD_END,g in order to fully hide the explicit mention of kobj(9) from device drivers.
2011-11-22 21:55:40 +00:00
DEVMETHOD_END
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
};
static driver_t ebus_pci_driver = {
"ebus",
ebus_pci_methods,
sizeof(struct ebus_softc),
};
EARLY_DRIVER_MODULE(ebus, pci, ebus_pci_driver, ebus_devclass, 0, 0,
Enroll these drivers in multipass probing. The motivation behind this is that the JBus to EBus bridges share the interrupt controller of a sibling JBus to PCIe bridge (at least as far as the OFW device tree is concerned, in reality they are part of the same chip) so we have to probe and attach the latter first. That happens to be also the case due to the fact that the JBus to PCIe bridges appear first in the OFW device tree but it doesn't hurt to ensure the right order.
2009-12-22 21:02:46 +00:00
BUS_PASS_BUS);
- Removed unused sc_node. - Provide module dependency information. - Static'ize ebus_release_resource() in order to match prototype. - Remove outdated and/or obsolete comments. - Fix whitespace bugs. MFC after: 3 days
2008-08-23 15:44:13 +00:00
MODULE_DEPEND(ebus, pci, 1, 1, 1);
MODULE_VERSION(ebus, 1);
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
static int
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
ebus_nexus_probe(device_t dev)
{
const char* compat;
compat = ofw_bus_get_compat(dev);
if (compat != NULL && strcmp(ofw_bus_get_name(dev), "ebus") == 0 &&
strcmp(compat, "jbus-ebus") == 0) {
device_set_desc(dev, "JBus-EBus bridge");
return (BUS_PROBE_GENERIC);
}
return (ENXIO);
}
static int
ebus_pci_probe(device_t dev)
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
{
if (pci_get_class(dev) != PCIC_BRIDGE ||
pci_get_vendor(dev) != 0x108e ||
- Artificially using SYS_RES_IOPORT for EBus devices for reasons of compatibility with ISA devices while in fact all known EBus devices actually use memory space turned out to be not a good idea as so far there is only the 'rtc' device known to show up either on an EBus or ISA bus but not on any of the other busses used on sparc64. However there are quite a couple of them that show up on either EBus, FireHose or SBus. In order to save extra code in the respective drivers switch ebus(4) to actually use SYS_RES_MEMORY for the memory resources of its children. At least for transition still accept SYS_RES_IOPORT and silently change it to SYS_RES_MEMORY. [1] - In ebus_probe() use ofw_bus_get_name() instead of re-implementing it via ofw_bus_get_node() and OF_getprop(). - Remove some unused variables. - Use FBSDID. Discussed with: tmm (some time ago)
2005-05-19 18:11:46 +00:00
strcmp(ofw_bus_get_name(dev), "ebus") != 0)
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
return (ENXIO);
if (pci_get_device(dev) == 0x1000)
device_set_desc(dev, "PCI-EBus2 bridge");
else if (pci_get_device(dev) == 0x1100)
device_set_desc(dev, "PCI-EBus3 bridge");
else
return (ENXIO);
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
return (BUS_PROBE_GENERIC);
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
}
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
static int
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
ebus_nexus_attach(device_t dev)
{
struct ebus_softc *sc;
phandle_t node;
sc = device_get_softc(dev);
node = ofw_bus_get_node(dev);
#ifndef SUN4V
if (OF_getprop(node, "portid", &sc->sc_ign,
sizeof(sc->sc_ign)) == -1) {
device_printf(dev, "could not determine IGN");
return (ENXIO);
}
#endif
sc->sc_nrange = OF_getprop_alloc(node, "ranges",
sizeof(struct ebus_nexus_ranges), &sc->sc_range);
if (sc->sc_nrange == -1) {
- Sanity check that the parent ranges given in the "ranges" property of PCI-EBus-bridges actually match the BARs as specified in and required by [1, p. 113 f.]. Doing so earlier would have simplified diagnosing a bug in QEMU/OpenBIOS getting the mapping of child addresses wrong, which still needs to be fixed there. In theory, we could try to change the BARs accordingly if we hit this problem. However, at least with real machines changing the decoding likely won't work, especially if the PCI-EBus-bridge is beneath an APB one. So implementing such functionality generally is rather pointless. - Actually change the allocation type of EBus resources if they change from SYS_RES_MEMORY to SYS_RES_IOPORT when mapping them to PCI ranges in ebus_alloc_resource() and passing them up to bus_activate_resource(9). This may happen with the QEMU/OpenBIOS PCI-EBus-bridge but not real ones. Still, this is only cleans up the code and the result of resource allocation and activation is unchanged. - Change the remainder of printf(9) to device_printf(9) calls and canonicalize their wording. MFC after: 1 week Peripheral Component Interconnect Input Output Controller, Part No.: 802-7837-01, Sun Microelectronics, March 1997 [1]
2015-09-13 21:59:56 +00:00
device_printf(dev, "could not get ranges property\n");
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
return (ENXIO);
}
return (ebus_attach(dev, sc, node));
}
static int
ebus_pci_attach(device_t dev)
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
{
struct ebus_softc *sc;
struct ebus_rinfo *eri;
struct resource *res;
- Sanity check that the parent ranges given in the "ranges" property of PCI-EBus-bridges actually match the BARs as specified in and required by [1, p. 113 f.]. Doing so earlier would have simplified diagnosing a bug in QEMU/OpenBIOS getting the mapping of child addresses wrong, which still needs to be fixed there. In theory, we could try to change the BARs accordingly if we hit this problem. However, at least with real machines changing the decoding likely won't work, especially if the PCI-EBus-bridge is beneath an APB one. So implementing such functionality generally is rather pointless. - Actually change the allocation type of EBus resources if they change from SYS_RES_MEMORY to SYS_RES_IOPORT when mapping them to PCI ranges in ebus_alloc_resource() and passing them up to bus_activate_resource(9). This may happen with the QEMU/OpenBIOS PCI-EBus-bridge but not real ones. Still, this is only cleans up the code and the result of resource allocation and activation is unchanged. - Change the remainder of printf(9) to device_printf(9) calls and canonicalize their wording. MFC after: 1 week Peripheral Component Interconnect Input Output Controller, Part No.: 802-7837-01, Sun Microelectronics, March 1997 [1]
2015-09-13 21:59:56 +00:00
struct isa_ranges *range;
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
phandle_t node;
int i, rnum, rid;
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
sc = device_get_softc(dev);
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
sc->sc_flags |= EBUS_PCI;
pci_write_config(dev, PCIR_COMMAND,
pci_read_config(dev, PCIR_COMMAND, 2) | PCIM_CMD_SERRESPEN |
PCIM_CMD_PERRESPEN | PCIM_CMD_BUSMASTEREN | PCIM_CMD_MEMEN, 2);
pci_write_config(dev, PCIR_CACHELNSZ, 16 /* 64 bytes */, 1);
pci_write_config(dev, PCIR_LATTIMER, 64 /* 64 PCI cycles */, 1);
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
- Removed unused sc_node. - Provide module dependency information. - Static'ize ebus_release_resource() in order to match prototype. - Remove outdated and/or obsolete comments. - Fix whitespace bugs. MFC after: 3 days
2008-08-23 15:44:13 +00:00
node = ofw_bus_get_node(dev);
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
sc->sc_nrange = OF_getprop_alloc(node, "ranges",
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
sizeof(struct isa_ranges), &sc->sc_range);
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
if (sc->sc_nrange == -1) {
- Sanity check that the parent ranges given in the "ranges" property of PCI-EBus-bridges actually match the BARs as specified in and required by [1, p. 113 f.]. Doing so earlier would have simplified diagnosing a bug in QEMU/OpenBIOS getting the mapping of child addresses wrong, which still needs to be fixed there. In theory, we could try to change the BARs accordingly if we hit this problem. However, at least with real machines changing the decoding likely won't work, especially if the PCI-EBus-bridge is beneath an APB one. So implementing such functionality generally is rather pointless. - Actually change the allocation type of EBus resources if they change from SYS_RES_MEMORY to SYS_RES_IOPORT when mapping them to PCI ranges in ebus_alloc_resource() and passing them up to bus_activate_resource(9). This may happen with the QEMU/OpenBIOS PCI-EBus-bridge but not real ones. Still, this is only cleans up the code and the result of resource allocation and activation is unchanged. - Change the remainder of printf(9) to device_printf(9) calls and canonicalize their wording. MFC after: 1 week Peripheral Component Interconnect Input Output Controller, Part No.: 802-7837-01, Sun Microelectronics, March 1997 [1]
2015-09-13 21:59:56 +00:00
device_printf(dev, "could not get ranges property\n");
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
return (ENXIO);
}
sc->sc_rinfo = malloc(sizeof(*sc->sc_rinfo) * sc->sc_nrange, M_DEVBUF,
M_WAITOK | M_ZERO);
/* For every range, there must be a matching resource. */
for (rnum = 0; rnum < sc->sc_nrange; rnum++) {
eri = &sc->sc_rinfo[rnum];
- Sanity check that the parent ranges given in the "ranges" property of PCI-EBus-bridges actually match the BARs as specified in and required by [1, p. 113 f.]. Doing so earlier would have simplified diagnosing a bug in QEMU/OpenBIOS getting the mapping of child addresses wrong, which still needs to be fixed there. In theory, we could try to change the BARs accordingly if we hit this problem. However, at least with real machines changing the decoding likely won't work, especially if the PCI-EBus-bridge is beneath an APB one. So implementing such functionality generally is rather pointless. - Actually change the allocation type of EBus resources if they change from SYS_RES_MEMORY to SYS_RES_IOPORT when mapping them to PCI ranges in ebus_alloc_resource() and passing them up to bus_activate_resource(9). This may happen with the QEMU/OpenBIOS PCI-EBus-bridge but not real ones. Still, this is only cleans up the code and the result of resource allocation and activation is unchanged. - Change the remainder of printf(9) to device_printf(9) calls and canonicalize their wording. MFC after: 1 week Peripheral Component Interconnect Input Output Controller, Part No.: 802-7837-01, Sun Microelectronics, March 1997 [1]
2015-09-13 21:59:56 +00:00
range = &((struct isa_ranges *)sc->sc_range)[rnum];
eri->eri_rtype = ofw_isa_range_restype(range);
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
rid = PCIR_BAR(rnum);
res = bus_alloc_resource_any(dev, eri->eri_rtype, &rid,
RF_ACTIVE);
if (res == NULL) {
- Sanity check that the parent ranges given in the "ranges" property of PCI-EBus-bridges actually match the BARs as specified in and required by [1, p. 113 f.]. Doing so earlier would have simplified diagnosing a bug in QEMU/OpenBIOS getting the mapping of child addresses wrong, which still needs to be fixed there. In theory, we could try to change the BARs accordingly if we hit this problem. However, at least with real machines changing the decoding likely won't work, especially if the PCI-EBus-bridge is beneath an APB one. So implementing such functionality generally is rather pointless. - Actually change the allocation type of EBus resources if they change from SYS_RES_MEMORY to SYS_RES_IOPORT when mapping them to PCI ranges in ebus_alloc_resource() and passing them up to bus_activate_resource(9). This may happen with the QEMU/OpenBIOS PCI-EBus-bridge but not real ones. Still, this is only cleans up the code and the result of resource allocation and activation is unchanged. - Change the remainder of printf(9) to device_printf(9) calls and canonicalize their wording. MFC after: 1 week Peripheral Component Interconnect Input Output Controller, Part No.: 802-7837-01, Sun Microelectronics, March 1997 [1]
2015-09-13 21:59:56 +00:00
device_printf(dev,
"could not allocate range resource %d\n", rnum);
goto fail;
}
if (rman_get_start(res) != ISA_RANGE_PHYS(range)) {
device_printf(dev,
"mismatch in start of range %d (0x%lx/0x%lx)\n",
rnum, rman_get_start(res), ISA_RANGE_PHYS(range));
goto fail;
}
if (rman_get_size(res) != range->size) {
device_printf(dev,
"mismatch in size of range %d (0x%lx/0x%x)\n",
rnum, rman_get_size(res), range->size);
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
goto fail;
}
eri->eri_res = res;
eri->eri_rman.rm_type = RMAN_ARRAY;
eri->eri_rman.rm_descr = "EBus range";
Make sparc64 compatible with NEW_PCIB and enable it: - Implement bus_adjust_resource() methods as far as necessary and in non-PCI bridge drivers as far as feasible without rototilling them. - As NEW_PCIB does a layering violation by activating resources at layers above pci(4) without previously bubbling up their allocation there, move the assignment of bus tags and handles from the bus_alloc_resource() to the bus_activate_resource() methods like at least the other NEW_PCIB enabled architectures do. This is somewhat unfortunate as previously sparc64 (ab)used resource activation to indicate whether SYS_RES_MEMORY resources should be mapped into KVA, which is only necessary if their going to be accessed via the pointer returned from rman_get_virtual() but not for bus_space(9) as the later always uses physical access on sparc64. Besides wasting KVA if we always map in SYS_RES_MEMORY resources, a driver also may deliberately not map them in if the firmware already has done so, possibly in a special way. So in order to still allow a driver to decide whether a SYS_RES_MEMORY resource should be mapped into KVA we let it indicate that by calling bus_space_map(9) with BUS_SPACE_MAP_LINEAR as actually documented in the bus_space(9) page. This is implemented by allocating a separate bus tag per SYS_RES_MEMORY resource and passing the resource via the previously unused bus tag cookie so we later on can call rman_set_virtual() in sparc64_bus_mem_map(). As a side effect this now also allows to actually indicate that a SYS_RES_MEMORY resource should be mapped in as cacheable and/or read-only via BUS_SPACE_MAP_CACHEABLE and BUS_SPACE_MAP_READONLY respectively. - Do some minor cleanup like taking advantage of rman_init_from_resource(), factor out the common part of bus tag allocation into a newly added sparc64_alloc_bus_tag(), hook up some missing newbus methods and replace some homegrown versions with the generic counterparts etc. - While at it, let apb_attach() (which can't use the generic NEW_PCIB code as APB bridges just don't have the base and limit registers implemented) regarding the config space registers cached in pcib_softc and the SYSCTL reporting nodes set up.
2011-10-02 23:22:38 +00:00
if (rman_init_from_resource(&eri->eri_rman, res) != 0) {
- Sanity check that the parent ranges given in the "ranges" property of PCI-EBus-bridges actually match the BARs as specified in and required by [1, p. 113 f.]. Doing so earlier would have simplified diagnosing a bug in QEMU/OpenBIOS getting the mapping of child addresses wrong, which still needs to be fixed there. In theory, we could try to change the BARs accordingly if we hit this problem. However, at least with real machines changing the decoding likely won't work, especially if the PCI-EBus-bridge is beneath an APB one. So implementing such functionality generally is rather pointless. - Actually change the allocation type of EBus resources if they change from SYS_RES_MEMORY to SYS_RES_IOPORT when mapping them to PCI ranges in ebus_alloc_resource() and passing them up to bus_activate_resource(9). This may happen with the QEMU/OpenBIOS PCI-EBus-bridge but not real ones. Still, this is only cleans up the code and the result of resource allocation and activation is unchanged. - Change the remainder of printf(9) to device_printf(9) calls and canonicalize their wording. MFC after: 1 week Peripheral Component Interconnect Input Output Controller, Part No.: 802-7837-01, Sun Microelectronics, March 1997 [1]
2015-09-13 21:59:56 +00:00
device_printf(dev,
"could not initialize rman for range %d", rnum);
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
goto fail;
}
}
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
return (ebus_attach(dev, sc, node));
fail:
for (i = rnum; i >= 0; i--) {
eri = &sc->sc_rinfo[i];
if (i < rnum)
rman_fini(&eri->eri_rman);
sparc64: for pointers replace 0 with NULL. These are mostly cosmetical, no functional change. Found with devel/coccinelle.
2016-04-15 12:17:34 +00:00
if (eri->eri_res != NULL) {
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
bus_release_resource(dev, eri->eri_rtype,
PCIR_BAR(rnum), eri->eri_res);
}
}
free(sc->sc_rinfo, M_DEVBUF);
Use OF_prop_free instead of direct call to free(9) Reviewed by: marius
2016-05-18 23:39:31 +00:00
OF_prop_free(sc->sc_range);
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
return (ENXIO);
}
static int
ebus_attach(device_t dev, struct ebus_softc *sc, phandle_t node)
{
struct ebus_devinfo *edi;
device_t cdev;
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
Add the new sparc64 OFW PCI framework, conditional on options OFW_NEWPCI for now. It introduces a OFW PCI bus driver and a generic OFW PCI-PCI bridge driver. By utilizing these, the PCI handling is much more elegant now. The advantages of the new approach are: - Device enumeration should hopefully be more like on Solaris now, so unit numbers should match what's printed on the box more closely. - Real interrupt routing is implemented now, so cardbus bridges etc. have at least a chance to work. - The quirk tables are gone and have been replaced by (hopefully sufficient) heuristics. - Much cleaner code. There was also a report that previously bogus interrupt assignments are fixed now, which can be attributed to the new heuristics. A pitfall, and the reason why this is not the default yet, is that it changes device enumeration, as mentioned above, which can make it necessary to change the system configuration if more than one unit of a device type is present (on a system with two hme cars, for example, it is possible that hme0 becomes hme1 and vice versa after enabling the option). Systems with multiple disk controllers may need to be booted into single user (and require manual specification of the root file system on boot) to adjust the fstab. Nevertheless, I would like to encourage users to use this option, so that it can be made the default soon. In detail, the changes are: - Introduce an OFW PCI bus driver; it inherits most methods from the generic PCI bus driver, but uses the firmware for enumeration, performs additional initialization for devices and firmware-specific interrupt routing. It also implements an OFW-specific method to allow child devices to get their firmware nodes. - Introduce an OFW PCI-PCI bridge driver; again, it inherits most of the generic PCI-PCI bridge driver; it has it's own method for interrupt routing, as well as some sparc64-specific methods (one to get the node again, and one to adjust the bridge bus range, since we need to reenumerate all PCI buses). - Convert the apb driver to the new way of handling things. - Provide a common framework for OFW bridge drivers, used be the two drivers above. - Provide a small common framework for interrupt routing (for all bridge types). - Convert the psycho driver to the new framework; this gets rid of a bunch of old kludges in pci_read_config(), and the whole preinitialization (ofw_pci_init()). - Convert the ISA MD part and the EBus driver to the new way interrupts and nodes are handled. - Introduce types for firmware interrupt properties. - Rename the old sparcbus_if to ofw_pci_if by repo copy (it is only required for PCI), and move it to a more correct location (new support methodsx were also added, and an old one was deprecated). - Fix a bunch of minor bugs, perform some cleanups. In some cases, I introduced some minor code duplication to keep the new code clean, in hopes that the old code will be unifdef'ed soon. Reviewed in part by: imp Tested by: jake, Marius Strobl <marius@alchemy.franken.de>, Sergey Mokryshev <mokr@mokr.net>, Chris Jackman <cjackNOSPAM@klatsch.org> Info on u30 firmware provided by: kris
2003-07-01 14:52:47 +00:00
ofw_bus_setup_iinfo(node, &sc->sc_iinfo, sizeof(ofw_isa_intr_t));
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
/*
Add the new sparc64 OFW PCI framework, conditional on options OFW_NEWPCI for now. It introduces a OFW PCI bus driver and a generic OFW PCI-PCI bridge driver. By utilizing these, the PCI handling is much more elegant now. The advantages of the new approach are: - Device enumeration should hopefully be more like on Solaris now, so unit numbers should match what's printed on the box more closely. - Real interrupt routing is implemented now, so cardbus bridges etc. have at least a chance to work. - The quirk tables are gone and have been replaced by (hopefully sufficient) heuristics. - Much cleaner code. There was also a report that previously bogus interrupt assignments are fixed now, which can be attributed to the new heuristics. A pitfall, and the reason why this is not the default yet, is that it changes device enumeration, as mentioned above, which can make it necessary to change the system configuration if more than one unit of a device type is present (on a system with two hme cars, for example, it is possible that hme0 becomes hme1 and vice versa after enabling the option). Systems with multiple disk controllers may need to be booted into single user (and require manual specification of the root file system on boot) to adjust the fstab. Nevertheless, I would like to encourage users to use this option, so that it can be made the default soon. In detail, the changes are: - Introduce an OFW PCI bus driver; it inherits most methods from the generic PCI bus driver, but uses the firmware for enumeration, performs additional initialization for devices and firmware-specific interrupt routing. It also implements an OFW-specific method to allow child devices to get their firmware nodes. - Introduce an OFW PCI-PCI bridge driver; again, it inherits most of the generic PCI-PCI bridge driver; it has it's own method for interrupt routing, as well as some sparc64-specific methods (one to get the node again, and one to adjust the bridge bus range, since we need to reenumerate all PCI buses). - Convert the apb driver to the new way of handling things. - Provide a common framework for OFW bridge drivers, used be the two drivers above. - Provide a small common framework for interrupt routing (for all bridge types). - Convert the psycho driver to the new framework; this gets rid of a bunch of old kludges in pci_read_config(), and the whole preinitialization (ofw_pci_init()). - Convert the ISA MD part and the EBus driver to the new way interrupts and nodes are handled. - Introduce types for firmware interrupt properties. - Rename the old sparcbus_if to ofw_pci_if by repo copy (it is only required for PCI), and move it to a more correct location (new support methodsx were also added, and an old one was deprecated). - Fix a bunch of minor bugs, perform some cleanups. In some cases, I introduced some minor code duplication to keep the new code clean, in hopes that the old code will be unifdef'ed soon. Reviewed in part by: imp Tested by: jake, Marius Strobl <marius@alchemy.franken.de>, Sergey Mokryshev <mokr@mokr.net>, Chris Jackman <cjackNOSPAM@klatsch.org> Info on u30 firmware provided by: kris
2003-07-01 14:52:47 +00:00
* Now attach our children.
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
*/
for (node = OF_child(node); node > 0; node = OF_peer(node)) {
- Convert these bus drivers to make use of the newly introduced set of ofw_bus_gen_get_*() for providing the ofw_bus KOBJ interface in order to reduce code duplication. - While here sync the various sparc64 bus drivers a bit (handle failure to attach a child gracefully instead of panicing, move the printing of child resources common to bus_print_child() and bus_probe_nomatch() implementations of a bus into a <bus>_print_res() function, ...) and fix some minor bugs and nits (plug memory leaks present when attaching a bus or child device fails, remove unused struct members, ...). Additional testing by: kris (central(4) and fhc(4))
2005-11-22 16:39:44 +00:00
if ((edi = ebus_setup_dinfo(dev, sc, node)) == NULL)
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
continue;
- Convert these bus drivers to make use of the newly introduced set of ofw_bus_gen_get_*() for providing the ofw_bus KOBJ interface in order to reduce code duplication. - While here sync the various sparc64 bus drivers a bit (handle failure to attach a child gracefully instead of panicing, move the printing of child resources common to bus_print_child() and bus_probe_nomatch() implementations of a bus into a <bus>_print_res() function, ...) and fix some minor bugs and nits (plug memory leaks present when attaching a bus or child device fails, remove unused struct members, ...). Additional testing by: kris (central(4) and fhc(4))
2005-11-22 16:39:44 +00:00
if ((cdev = device_add_child(dev, NULL, -1)) == NULL) {
device_printf(dev, "<%s>: device_add_child failed\n",
edi->edi_obdinfo.obd_name);
ebus_destroy_dinfo(edi);
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
continue;
}
device_set_ivars(cdev, edi);
}
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
return (bus_generic_attach(dev));
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
}
static int
ebus_print_child(device_t dev, device_t child)
{
int retval;
retval = bus_print_child_header(dev, child);
- Convert these bus drivers to make use of the newly introduced set of ofw_bus_gen_get_*() for providing the ofw_bus KOBJ interface in order to reduce code duplication. - While here sync the various sparc64 bus drivers a bit (handle failure to attach a child gracefully instead of panicing, move the printing of child resources common to bus_print_child() and bus_probe_nomatch() implementations of a bus into a <bus>_print_res() function, ...) and fix some minor bugs and nits (plug memory leaks present when attaching a bus or child device fails, remove unused struct members, ...). Additional testing by: kris (central(4) and fhc(4))
2005-11-22 16:39:44 +00:00
retval += ebus_print_res(device_get_ivars(child));
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
retval += bus_print_child_footer(dev, child);
return (retval);
}
static void
ebus_probe_nomatch(device_t dev, device_t child)
{
- Convert these bus drivers to make use of the newly introduced set of ofw_bus_gen_get_*() for providing the ofw_bus KOBJ interface in order to reduce code duplication. - While here sync the various sparc64 bus drivers a bit (handle failure to attach a child gracefully instead of panicing, move the printing of child resources common to bus_print_child() and bus_probe_nomatch() implementations of a bus into a <bus>_print_res() function, ...) and fix some minor bugs and nits (plug memory leaks present when attaching a bus or child device fails, remove unused struct members, ...). Additional testing by: kris (central(4) and fhc(4))
2005-11-22 16:39:44 +00:00
device_printf(dev, "<%s>", ofw_bus_get_name(child));
ebus_print_res(device_get_ivars(child));
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
printf(" (no driver attached)\n");
}
static struct resource *
ebus_alloc_resource(device_t bus, device_t child, int type, int *rid,
Convert rman to use rman_res_t instead of u_long Summary: Migrate to using the semi-opaque type rman_res_t to specify rman resources. For now, this is still compatible with u_long. This is step one in migrating rman to use uintmax_t for resources instead of u_long. Going forward, this could feasibly be used to specify architecture-specific definitions of resource ranges, rather than baking a specific integer type into the API. This change has been broken out to facilitate MFC'ing drivers back to 10 without breaking ABI. Reviewed By: jhb Sponsored by: Alex Perez/Inertial Computing Differential Revision: https://reviews.freebsd.org/D5075
2016-01-27 02:23:54 +00:00
rman_res_t start, rman_res_t end, rman_res_t count, u_int flags)
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
{
struct ebus_softc *sc;
struct resource_list *rl;
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
struct resource_list_entry *rle = NULL;
struct resource *res;
Make sparc64 compatible with NEW_PCIB and enable it: - Implement bus_adjust_resource() methods as far as necessary and in non-PCI bridge drivers as far as feasible without rototilling them. - As NEW_PCIB does a layering violation by activating resources at layers above pci(4) without previously bubbling up their allocation there, move the assignment of bus tags and handles from the bus_alloc_resource() to the bus_activate_resource() methods like at least the other NEW_PCIB enabled architectures do. This is somewhat unfortunate as previously sparc64 (ab)used resource activation to indicate whether SYS_RES_MEMORY resources should be mapped into KVA, which is only necessary if their going to be accessed via the pointer returned from rman_get_virtual() but not for bus_space(9) as the later always uses physical access on sparc64. Besides wasting KVA if we always map in SYS_RES_MEMORY resources, a driver also may deliberately not map them in if the firmware already has done so, possibly in a special way. So in order to still allow a driver to decide whether a SYS_RES_MEMORY resource should be mapped into KVA we let it indicate that by calling bus_space_map(9) with BUS_SPACE_MAP_LINEAR as actually documented in the bus_space(9) page. This is implemented by allocating a separate bus tag per SYS_RES_MEMORY resource and passing the resource via the previously unused bus tag cookie so we later on can call rman_set_virtual() in sparc64_bus_mem_map(). As a side effect this now also allows to actually indicate that a SYS_RES_MEMORY resource should be mapped in as cacheable and/or read-only via BUS_SPACE_MAP_CACHEABLE and BUS_SPACE_MAP_READONLY respectively. - Do some minor cleanup like taking advantage of rman_init_from_resource(), factor out the common part of bus tag allocation into a newly added sparc64_alloc_bus_tag(), hook up some missing newbus methods and replace some homegrown versions with the generic counterparts etc. - While at it, let apb_attach() (which can't use the generic NEW_PCIB code as APB bridges just don't have the base and limit registers implemented) regarding the config space registers cached in pcib_softc and the SYSCTL reporting nodes set up.
2011-10-02 23:22:38 +00:00
struct ebus_rinfo *eri;
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
struct ebus_nexus_ranges *enr;
uint64_t cend, cstart, offset;
Make sparc64 compatible with NEW_PCIB and enable it: - Implement bus_adjust_resource() methods as far as necessary and in non-PCI bridge drivers as far as feasible without rototilling them. - As NEW_PCIB does a layering violation by activating resources at layers above pci(4) without previously bubbling up their allocation there, move the assignment of bus tags and handles from the bus_alloc_resource() to the bus_activate_resource() methods like at least the other NEW_PCIB enabled architectures do. This is somewhat unfortunate as previously sparc64 (ab)used resource activation to indicate whether SYS_RES_MEMORY resources should be mapped into KVA, which is only necessary if their going to be accessed via the pointer returned from rman_get_virtual() but not for bus_space(9) as the later always uses physical access on sparc64. Besides wasting KVA if we always map in SYS_RES_MEMORY resources, a driver also may deliberately not map them in if the firmware already has done so, possibly in a special way. So in order to still allow a driver to decide whether a SYS_RES_MEMORY resource should be mapped into KVA we let it indicate that by calling bus_space_map(9) with BUS_SPACE_MAP_LINEAR as actually documented in the bus_space(9) page. This is implemented by allocating a separate bus tag per SYS_RES_MEMORY resource and passing the resource via the previously unused bus tag cookie so we later on can call rman_set_virtual() in sparc64_bus_mem_map(). As a side effect this now also allows to actually indicate that a SYS_RES_MEMORY resource should be mapped in as cacheable and/or read-only via BUS_SPACE_MAP_CACHEABLE and BUS_SPACE_MAP_READONLY respectively. - Do some minor cleanup like taking advantage of rman_init_from_resource(), factor out the common part of bus tag allocation into a newly added sparc64_alloc_bus_tag(), hook up some missing newbus methods and replace some homegrown versions with the generic counterparts etc. - While at it, let apb_attach() (which can't use the generic NEW_PCIB code as APB bridges just don't have the base and limit registers implemented) regarding the config space registers cached in pcib_softc and the SYSCTL reporting nodes set up.
2011-10-02 23:22:38 +00:00
int i, isdefault, passthrough, ridx;
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
Introduce a RMAN_IS_DEFAULT_RANGE() macro, and use it. This simplifies checking for default resource range for bus_alloc_resource(), and improves readability. This is part of, and related to, the migration of rman_res_t from u_long to uintmax_t. Discussed with: jhb Suggested by: marcel
2016-02-20 01:32:58 +00:00
isdefault = RMAN_IS_DEFAULT_RANGE(start, end);
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
passthrough = (device_get_parent(child) != bus);
sc = device_get_softc(bus);
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
rl = BUS_GET_RESOURCE_LIST(bus, child);
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
switch (type) {
- Artificially using SYS_RES_IOPORT for EBus devices for reasons of compatibility with ISA devices while in fact all known EBus devices actually use memory space turned out to be not a good idea as so far there is only the 'rtc' device known to show up either on an EBus or ISA bus but not on any of the other busses used on sparc64. However there are quite a couple of them that show up on either EBus, FireHose or SBus. In order to save extra code in the respective drivers switch ebus(4) to actually use SYS_RES_MEMORY for the memory resources of its children. At least for transition still accept SYS_RES_IOPORT and silently change it to SYS_RES_MEMORY. [1] - In ebus_probe() use ofw_bus_get_name() instead of re-implementing it via ofw_bus_get_node() and OF_getprop(). - Remove some unused variables. - Use FBSDID. Discussed with: tmm (some time ago)
2005-05-19 18:11:46 +00:00
case SYS_RES_MEMORY:
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
KASSERT(!(isdefault && passthrough),
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
("%s: passthrough of default allocation", __func__));
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
if (!passthrough) {
Now that all affected drivers have been changed remove the helpers for the SYS_RES_IOPORT -> SYS_RES_MEMORY transition again. While it was helpful to not need to change all of the affected drivers in a single pass together with ebus(4) we probably shouldn't start into 6.0 with such a hack. This requires some of the modules of affected drivers to be rebuilt, namely: auxio(4), snd_audiocs(4) and puc(4).
2005-06-04 20:31:20 +00:00
rle = resource_list_find(rl, type, *rid);
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
if (rle == NULL)
return (NULL);
KASSERT(rle->res == NULL,
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
("%s: resource entry is busy", __func__));
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
if (isdefault) {
start = rle->start;
count = ulmax(count, rle->count);
end = ulmax(rle->end, start + count - 1);
}
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
}
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
res = NULL;
if ((sc->sc_flags & EBUS_PCI) != 0) {
/*
* Map EBus ranges to PCI ranges. This may include
* changing the allocation type.
*/
- Sanity check that the parent ranges given in the "ranges" property of PCI-EBus-bridges actually match the BARs as specified in and required by [1, p. 113 f.]. Doing so earlier would have simplified diagnosing a bug in QEMU/OpenBIOS getting the mapping of child addresses wrong, which still needs to be fixed there. In theory, we could try to change the BARs accordingly if we hit this problem. However, at least with real machines changing the decoding likely won't work, especially if the PCI-EBus-bridge is beneath an APB one. So implementing such functionality generally is rather pointless. - Actually change the allocation type of EBus resources if they change from SYS_RES_MEMORY to SYS_RES_IOPORT when mapping them to PCI ranges in ebus_alloc_resource() and passing them up to bus_activate_resource(9). This may happen with the QEMU/OpenBIOS PCI-EBus-bridge but not real ones. Still, this is only cleans up the code and the result of resource allocation and activation is unchanged. - Change the remainder of printf(9) to device_printf(9) calls and canonicalize their wording. MFC after: 1 week Peripheral Component Interconnect Input Output Controller, Part No.: 802-7837-01, Sun Microelectronics, March 1997 [1]
2015-09-13 21:59:56 +00:00
type = ofw_isa_range_map(sc->sc_range, sc->sc_nrange,
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
&start, &end, &ridx);
Make sparc64 compatible with NEW_PCIB and enable it: - Implement bus_adjust_resource() methods as far as necessary and in non-PCI bridge drivers as far as feasible without rototilling them. - As NEW_PCIB does a layering violation by activating resources at layers above pci(4) without previously bubbling up their allocation there, move the assignment of bus tags and handles from the bus_alloc_resource() to the bus_activate_resource() methods like at least the other NEW_PCIB enabled architectures do. This is somewhat unfortunate as previously sparc64 (ab)used resource activation to indicate whether SYS_RES_MEMORY resources should be mapped into KVA, which is only necessary if their going to be accessed via the pointer returned from rman_get_virtual() but not for bus_space(9) as the later always uses physical access on sparc64. Besides wasting KVA if we always map in SYS_RES_MEMORY resources, a driver also may deliberately not map them in if the firmware already has done so, possibly in a special way. So in order to still allow a driver to decide whether a SYS_RES_MEMORY resource should be mapped into KVA we let it indicate that by calling bus_space_map(9) with BUS_SPACE_MAP_LINEAR as actually documented in the bus_space(9) page. This is implemented by allocating a separate bus tag per SYS_RES_MEMORY resource and passing the resource via the previously unused bus tag cookie so we later on can call rman_set_virtual() in sparc64_bus_mem_map(). As a side effect this now also allows to actually indicate that a SYS_RES_MEMORY resource should be mapped in as cacheable and/or read-only via BUS_SPACE_MAP_CACHEABLE and BUS_SPACE_MAP_READONLY respectively. - Do some minor cleanup like taking advantage of rman_init_from_resource(), factor out the common part of bus tag allocation into a newly added sparc64_alloc_bus_tag(), hook up some missing newbus methods and replace some homegrown versions with the generic counterparts etc. - While at it, let apb_attach() (which can't use the generic NEW_PCIB code as APB bridges just don't have the base and limit registers implemented) regarding the config space registers cached in pcib_softc and the SYSCTL reporting nodes set up.
2011-10-02 23:22:38 +00:00
eri = &sc->sc_rinfo[ridx];
res = rman_reserve_resource(&eri->eri_rman, start,
end, count, flags & ~RF_ACTIVE, child);
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
if (res == NULL)
return (NULL);
rman_set_rid(res, *rid);
Make sparc64 compatible with NEW_PCIB and enable it: - Implement bus_adjust_resource() methods as far as necessary and in non-PCI bridge drivers as far as feasible without rototilling them. - As NEW_PCIB does a layering violation by activating resources at layers above pci(4) without previously bubbling up their allocation there, move the assignment of bus tags and handles from the bus_alloc_resource() to the bus_activate_resource() methods like at least the other NEW_PCIB enabled architectures do. This is somewhat unfortunate as previously sparc64 (ab)used resource activation to indicate whether SYS_RES_MEMORY resources should be mapped into KVA, which is only necessary if their going to be accessed via the pointer returned from rman_get_virtual() but not for bus_space(9) as the later always uses physical access on sparc64. Besides wasting KVA if we always map in SYS_RES_MEMORY resources, a driver also may deliberately not map them in if the firmware already has done so, possibly in a special way. So in order to still allow a driver to decide whether a SYS_RES_MEMORY resource should be mapped into KVA we let it indicate that by calling bus_space_map(9) with BUS_SPACE_MAP_LINEAR as actually documented in the bus_space(9) page. This is implemented by allocating a separate bus tag per SYS_RES_MEMORY resource and passing the resource via the previously unused bus tag cookie so we later on can call rman_set_virtual() in sparc64_bus_mem_map(). As a side effect this now also allows to actually indicate that a SYS_RES_MEMORY resource should be mapped in as cacheable and/or read-only via BUS_SPACE_MAP_CACHEABLE and BUS_SPACE_MAP_READONLY respectively. - Do some minor cleanup like taking advantage of rman_init_from_resource(), factor out the common part of bus tag allocation into a newly added sparc64_alloc_bus_tag(), hook up some missing newbus methods and replace some homegrown versions with the generic counterparts etc. - While at it, let apb_attach() (which can't use the generic NEW_PCIB code as APB bridges just don't have the base and limit registers implemented) regarding the config space registers cached in pcib_softc and the SYSCTL reporting nodes set up.
2011-10-02 23:22:38 +00:00
if ((flags & RF_ACTIVE) != 0 && bus_activate_resource(
child, type, *rid, res) != 0) {
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
rman_release_resource(res);
return (NULL);
}
} else {
/* Map EBus ranges to nexus ranges. */
for (i = 0; i < sc->sc_nrange; i++) {
enr = &((struct ebus_nexus_ranges *)
sc->sc_range)[i];
cstart = (((uint64_t)enr->child_hi) << 32) |
enr->child_lo;
cend = cstart + enr->size - 1;
if (start >= cstart && end <= cend) {
offset =
(((uint64_t)enr->phys_hi) << 32) |
enr->phys_lo;
start += offset - cstart;
end += offset - cstart;
res = bus_generic_alloc_resource(bus,
child, type, rid, start, end,
count, flags);
break;
}
}
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
}
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
if (!passthrough)
rle->res = res;
return (res);
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
case SYS_RES_IRQ:
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
return (resource_list_alloc(rl, bus, child, type, rid, start,
end, count, flags));
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
}
Don't panic when we're asked to allocate a resource type that we know won't exist for EBus. Just fail the allocation by returning NULL. Now drivers that are MI can try resources that the driver knows may be used by the device.
2005-01-09 18:58:08 +00:00
return (NULL);
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
}
Minor bug fixes (add a missing break, correct the resource ranges, remove a memory leak).
2002-02-13 15:35:22 +00:00
Make sparc64 compatible with NEW_PCIB and enable it: - Implement bus_adjust_resource() methods as far as necessary and in non-PCI bridge drivers as far as feasible without rototilling them. - As NEW_PCIB does a layering violation by activating resources at layers above pci(4) without previously bubbling up their allocation there, move the assignment of bus tags and handles from the bus_alloc_resource() to the bus_activate_resource() methods like at least the other NEW_PCIB enabled architectures do. This is somewhat unfortunate as previously sparc64 (ab)used resource activation to indicate whether SYS_RES_MEMORY resources should be mapped into KVA, which is only necessary if their going to be accessed via the pointer returned from rman_get_virtual() but not for bus_space(9) as the later always uses physical access on sparc64. Besides wasting KVA if we always map in SYS_RES_MEMORY resources, a driver also may deliberately not map them in if the firmware already has done so, possibly in a special way. So in order to still allow a driver to decide whether a SYS_RES_MEMORY resource should be mapped into KVA we let it indicate that by calling bus_space_map(9) with BUS_SPACE_MAP_LINEAR as actually documented in the bus_space(9) page. This is implemented by allocating a separate bus tag per SYS_RES_MEMORY resource and passing the resource via the previously unused bus tag cookie so we later on can call rman_set_virtual() in sparc64_bus_mem_map(). As a side effect this now also allows to actually indicate that a SYS_RES_MEMORY resource should be mapped in as cacheable and/or read-only via BUS_SPACE_MAP_CACHEABLE and BUS_SPACE_MAP_READONLY respectively. - Do some minor cleanup like taking advantage of rman_init_from_resource(), factor out the common part of bus tag allocation into a newly added sparc64_alloc_bus_tag(), hook up some missing newbus methods and replace some homegrown versions with the generic counterparts etc. - While at it, let apb_attach() (which can't use the generic NEW_PCIB code as APB bridges just don't have the base and limit registers implemented) regarding the config space registers cached in pcib_softc and the SYSCTL reporting nodes set up.
2011-10-02 23:22:38 +00:00
static int
ebus_activate_resource(device_t bus, device_t child, int type, int rid,
struct resource *res)
{
struct ebus_softc *sc;
struct ebus_rinfo *eri;
bus_space_tag_t bt;
bus_space_handle_t bh;
int i, rv;
sc = device_get_softc(bus);
- Sanity check that the parent ranges given in the "ranges" property of PCI-EBus-bridges actually match the BARs as specified in and required by [1, p. 113 f.]. Doing so earlier would have simplified diagnosing a bug in QEMU/OpenBIOS getting the mapping of child addresses wrong, which still needs to be fixed there. In theory, we could try to change the BARs accordingly if we hit this problem. However, at least with real machines changing the decoding likely won't work, especially if the PCI-EBus-bridge is beneath an APB one. So implementing such functionality generally is rather pointless. - Actually change the allocation type of EBus resources if they change from SYS_RES_MEMORY to SYS_RES_IOPORT when mapping them to PCI ranges in ebus_alloc_resource() and passing them up to bus_activate_resource(9). This may happen with the QEMU/OpenBIOS PCI-EBus-bridge but not real ones. Still, this is only cleans up the code and the result of resource allocation and activation is unchanged. - Change the remainder of printf(9) to device_printf(9) calls and canonicalize their wording. MFC after: 1 week Peripheral Component Interconnect Input Output Controller, Part No.: 802-7837-01, Sun Microelectronics, March 1997 [1]
2015-09-13 21:59:56 +00:00
if ((sc->sc_flags & EBUS_PCI) != 0 && type != SYS_RES_IRQ) {
Make sparc64 compatible with NEW_PCIB and enable it: - Implement bus_adjust_resource() methods as far as necessary and in non-PCI bridge drivers as far as feasible without rototilling them. - As NEW_PCIB does a layering violation by activating resources at layers above pci(4) without previously bubbling up their allocation there, move the assignment of bus tags and handles from the bus_alloc_resource() to the bus_activate_resource() methods like at least the other NEW_PCIB enabled architectures do. This is somewhat unfortunate as previously sparc64 (ab)used resource activation to indicate whether SYS_RES_MEMORY resources should be mapped into KVA, which is only necessary if their going to be accessed via the pointer returned from rman_get_virtual() but not for bus_space(9) as the later always uses physical access on sparc64. Besides wasting KVA if we always map in SYS_RES_MEMORY resources, a driver also may deliberately not map them in if the firmware already has done so, possibly in a special way. So in order to still allow a driver to decide whether a SYS_RES_MEMORY resource should be mapped into KVA we let it indicate that by calling bus_space_map(9) with BUS_SPACE_MAP_LINEAR as actually documented in the bus_space(9) page. This is implemented by allocating a separate bus tag per SYS_RES_MEMORY resource and passing the resource via the previously unused bus tag cookie so we later on can call rman_set_virtual() in sparc64_bus_mem_map(). As a side effect this now also allows to actually indicate that a SYS_RES_MEMORY resource should be mapped in as cacheable and/or read-only via BUS_SPACE_MAP_CACHEABLE and BUS_SPACE_MAP_READONLY respectively. - Do some minor cleanup like taking advantage of rman_init_from_resource(), factor out the common part of bus tag allocation into a newly added sparc64_alloc_bus_tag(), hook up some missing newbus methods and replace some homegrown versions with the generic counterparts etc. - While at it, let apb_attach() (which can't use the generic NEW_PCIB code as APB bridges just don't have the base and limit registers implemented) regarding the config space registers cached in pcib_softc and the SYSCTL reporting nodes set up.
2011-10-02 23:22:38 +00:00
for (i = 0; i < sc->sc_nrange; i++) {
eri = &sc->sc_rinfo[i];
if (rman_is_region_manager(res, &eri->eri_rman) != 0) {
bt = rman_get_bustag(eri->eri_res);
rv = bus_space_subregion(bt,
rman_get_bushandle(eri->eri_res),
rman_get_start(res) -
rman_get_start(eri->eri_res),
rman_get_size(res), &bh);
if (rv != 0)
return (rv);
rman_set_bustag(res, bt);
rman_set_bushandle(res, bh);
return (rman_activate_resource(res));
}
}
return (EINVAL);
}
return (bus_generic_activate_resource(bus, child, type, rid, res));
}
static int
ebus_adjust_resource(device_t bus __unused, device_t child __unused,
Convert rman to use rman_res_t instead of u_long Summary: Migrate to using the semi-opaque type rman_res_t to specify rman resources. For now, this is still compatible with u_long. This is step one in migrating rman to use uintmax_t for resources instead of u_long. Going forward, this could feasibly be used to specify architecture-specific definitions of resource ranges, rather than baking a specific integer type into the API. This change has been broken out to facilitate MFC'ing drivers back to 10 without breaking ABI. Reviewed By: jhb Sponsored by: Alex Perez/Inertial Computing Differential Revision: https://reviews.freebsd.org/D5075
2016-01-27 02:23:54 +00:00
int type __unused, struct resource *res __unused, rman_res_t start __unused,
rman_res_t end __unused)
Make sparc64 compatible with NEW_PCIB and enable it: - Implement bus_adjust_resource() methods as far as necessary and in non-PCI bridge drivers as far as feasible without rototilling them. - As NEW_PCIB does a layering violation by activating resources at layers above pci(4) without previously bubbling up their allocation there, move the assignment of bus tags and handles from the bus_alloc_resource() to the bus_activate_resource() methods like at least the other NEW_PCIB enabled architectures do. This is somewhat unfortunate as previously sparc64 (ab)used resource activation to indicate whether SYS_RES_MEMORY resources should be mapped into KVA, which is only necessary if their going to be accessed via the pointer returned from rman_get_virtual() but not for bus_space(9) as the later always uses physical access on sparc64. Besides wasting KVA if we always map in SYS_RES_MEMORY resources, a driver also may deliberately not map them in if the firmware already has done so, possibly in a special way. So in order to still allow a driver to decide whether a SYS_RES_MEMORY resource should be mapped into KVA we let it indicate that by calling bus_space_map(9) with BUS_SPACE_MAP_LINEAR as actually documented in the bus_space(9) page. This is implemented by allocating a separate bus tag per SYS_RES_MEMORY resource and passing the resource via the previously unused bus tag cookie so we later on can call rman_set_virtual() in sparc64_bus_mem_map(). As a side effect this now also allows to actually indicate that a SYS_RES_MEMORY resource should be mapped in as cacheable and/or read-only via BUS_SPACE_MAP_CACHEABLE and BUS_SPACE_MAP_READONLY respectively. - Do some minor cleanup like taking advantage of rman_init_from_resource(), factor out the common part of bus tag allocation into a newly added sparc64_alloc_bus_tag(), hook up some missing newbus methods and replace some homegrown versions with the generic counterparts etc. - While at it, let apb_attach() (which can't use the generic NEW_PCIB code as APB bridges just don't have the base and limit registers implemented) regarding the config space registers cached in pcib_softc and the SYSCTL reporting nodes set up.
2011-10-02 23:22:38 +00:00
{
return (ENXIO);
}
- Removed unused sc_node. - Provide module dependency information. - Static'ize ebus_release_resource() in order to match prototype. - Remove outdated and/or obsolete comments. - Fix whitespace bugs. MFC after: 3 days
2008-08-23 15:44:13 +00:00
static int
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
ebus_release_resource(device_t bus, device_t child, int type, int rid,
struct resource *res)
{
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
struct ebus_softc *sc;
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
struct resource_list *rl;
struct resource_list_entry *rle;
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
int passthrough, rv;
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
passthrough = (device_get_parent(child) != bus);
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
rl = BUS_GET_RESOURCE_LIST(bus, child);
Make sparc64 compatible with NEW_PCIB and enable it: - Implement bus_adjust_resource() methods as far as necessary and in non-PCI bridge drivers as far as feasible without rototilling them. - As NEW_PCIB does a layering violation by activating resources at layers above pci(4) without previously bubbling up their allocation there, move the assignment of bus tags and handles from the bus_alloc_resource() to the bus_activate_resource() methods like at least the other NEW_PCIB enabled architectures do. This is somewhat unfortunate as previously sparc64 (ab)used resource activation to indicate whether SYS_RES_MEMORY resources should be mapped into KVA, which is only necessary if their going to be accessed via the pointer returned from rman_get_virtual() but not for bus_space(9) as the later always uses physical access on sparc64. Besides wasting KVA if we always map in SYS_RES_MEMORY resources, a driver also may deliberately not map them in if the firmware already has done so, possibly in a special way. So in order to still allow a driver to decide whether a SYS_RES_MEMORY resource should be mapped into KVA we let it indicate that by calling bus_space_map(9) with BUS_SPACE_MAP_LINEAR as actually documented in the bus_space(9) page. This is implemented by allocating a separate bus tag per SYS_RES_MEMORY resource and passing the resource via the previously unused bus tag cookie so we later on can call rman_set_virtual() in sparc64_bus_mem_map(). As a side effect this now also allows to actually indicate that a SYS_RES_MEMORY resource should be mapped in as cacheable and/or read-only via BUS_SPACE_MAP_CACHEABLE and BUS_SPACE_MAP_READONLY respectively. - Do some minor cleanup like taking advantage of rman_init_from_resource(), factor out the common part of bus tag allocation into a newly added sparc64_alloc_bus_tag(), hook up some missing newbus methods and replace some homegrown versions with the generic counterparts etc. - While at it, let apb_attach() (which can't use the generic NEW_PCIB code as APB bridges just don't have the base and limit registers implemented) regarding the config space registers cached in pcib_softc and the SYSCTL reporting nodes set up.
2011-10-02 23:22:38 +00:00
sc = device_get_softc(bus);
- Sanity check that the parent ranges given in the "ranges" property of PCI-EBus-bridges actually match the BARs as specified in and required by [1, p. 113 f.]. Doing so earlier would have simplified diagnosing a bug in QEMU/OpenBIOS getting the mapping of child addresses wrong, which still needs to be fixed there. In theory, we could try to change the BARs accordingly if we hit this problem. However, at least with real machines changing the decoding likely won't work, especially if the PCI-EBus-bridge is beneath an APB one. So implementing such functionality generally is rather pointless. - Actually change the allocation type of EBus resources if they change from SYS_RES_MEMORY to SYS_RES_IOPORT when mapping them to PCI ranges in ebus_alloc_resource() and passing them up to bus_activate_resource(9). This may happen with the QEMU/OpenBIOS PCI-EBus-bridge but not real ones. Still, this is only cleans up the code and the result of resource allocation and activation is unchanged. - Change the remainder of printf(9) to device_printf(9) calls and canonicalize their wording. MFC after: 1 week Peripheral Component Interconnect Input Output Controller, Part No.: 802-7837-01, Sun Microelectronics, March 1997 [1]
2015-09-13 21:59:56 +00:00
if ((sc->sc_flags & EBUS_PCI) != 0 && type != SYS_RES_IRQ) {
Make sparc64 compatible with NEW_PCIB and enable it: - Implement bus_adjust_resource() methods as far as necessary and in non-PCI bridge drivers as far as feasible without rototilling them. - As NEW_PCIB does a layering violation by activating resources at layers above pci(4) without previously bubbling up their allocation there, move the assignment of bus tags and handles from the bus_alloc_resource() to the bus_activate_resource() methods like at least the other NEW_PCIB enabled architectures do. This is somewhat unfortunate as previously sparc64 (ab)used resource activation to indicate whether SYS_RES_MEMORY resources should be mapped into KVA, which is only necessary if their going to be accessed via the pointer returned from rman_get_virtual() but not for bus_space(9) as the later always uses physical access on sparc64. Besides wasting KVA if we always map in SYS_RES_MEMORY resources, a driver also may deliberately not map them in if the firmware already has done so, possibly in a special way. So in order to still allow a driver to decide whether a SYS_RES_MEMORY resource should be mapped into KVA we let it indicate that by calling bus_space_map(9) with BUS_SPACE_MAP_LINEAR as actually documented in the bus_space(9) page. This is implemented by allocating a separate bus tag per SYS_RES_MEMORY resource and passing the resource via the previously unused bus tag cookie so we later on can call rman_set_virtual() in sparc64_bus_mem_map(). As a side effect this now also allows to actually indicate that a SYS_RES_MEMORY resource should be mapped in as cacheable and/or read-only via BUS_SPACE_MAP_CACHEABLE and BUS_SPACE_MAP_READONLY respectively. - Do some minor cleanup like taking advantage of rman_init_from_resource(), factor out the common part of bus tag allocation into a newly added sparc64_alloc_bus_tag(), hook up some missing newbus methods and replace some homegrown versions with the generic counterparts etc. - While at it, let apb_attach() (which can't use the generic NEW_PCIB code as APB bridges just don't have the base and limit registers implemented) regarding the config space registers cached in pcib_softc and the SYSCTL reporting nodes set up.
2011-10-02 23:22:38 +00:00
if ((rman_get_flags(res) & RF_ACTIVE) != 0 ){
rv = bus_deactivate_resource(child, type, rid, res);
if (rv != 0)
return (rv);
}
rv = rman_release_resource(res);
if (rv != 0)
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
return (rv);
if (!passthrough) {
Now that all affected drivers have been changed remove the helpers for the SYS_RES_IOPORT -> SYS_RES_MEMORY transition again. While it was helpful to not need to change all of the affected drivers in a single pass together with ebus(4) we probably shouldn't start into 6.0 with such a hack. This requires some of the modules of affected drivers to be rebuilt, namely: auxio(4), snd_audiocs(4) and puc(4).
2005-06-04 20:31:20 +00:00
rle = resource_list_find(rl, type, rid);
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
KASSERT(rle != NULL,
("%s: resource entry not found!", __func__));
KASSERT(rle->res != NULL,
("%s: resource entry is not busy", __func__));
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
rle->res = NULL;
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
}
Make sparc64 compatible with NEW_PCIB and enable it: - Implement bus_adjust_resource() methods as far as necessary and in non-PCI bridge drivers as far as feasible without rototilling them. - As NEW_PCIB does a layering violation by activating resources at layers above pci(4) without previously bubbling up their allocation there, move the assignment of bus tags and handles from the bus_alloc_resource() to the bus_activate_resource() methods like at least the other NEW_PCIB enabled architectures do. This is somewhat unfortunate as previously sparc64 (ab)used resource activation to indicate whether SYS_RES_MEMORY resources should be mapped into KVA, which is only necessary if their going to be accessed via the pointer returned from rman_get_virtual() but not for bus_space(9) as the later always uses physical access on sparc64. Besides wasting KVA if we always map in SYS_RES_MEMORY resources, a driver also may deliberately not map them in if the firmware already has done so, possibly in a special way. So in order to still allow a driver to decide whether a SYS_RES_MEMORY resource should be mapped into KVA we let it indicate that by calling bus_space_map(9) with BUS_SPACE_MAP_LINEAR as actually documented in the bus_space(9) page. This is implemented by allocating a separate bus tag per SYS_RES_MEMORY resource and passing the resource via the previously unused bus tag cookie so we later on can call rman_set_virtual() in sparc64_bus_mem_map(). As a side effect this now also allows to actually indicate that a SYS_RES_MEMORY resource should be mapped in as cacheable and/or read-only via BUS_SPACE_MAP_CACHEABLE and BUS_SPACE_MAP_READONLY respectively. - Do some minor cleanup like taking advantage of rman_init_from_resource(), factor out the common part of bus tag allocation into a newly added sparc64_alloc_bus_tag(), hook up some missing newbus methods and replace some homegrown versions with the generic counterparts etc. - While at it, let apb_attach() (which can't use the generic NEW_PCIB code as APB bridges just don't have the base and limit registers implemented) regarding the config space registers cached in pcib_softc and the SYSCTL reporting nodes set up.
2011-10-02 23:22:38 +00:00
return (0);
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
}
Make sparc64 compatible with NEW_PCIB and enable it: - Implement bus_adjust_resource() methods as far as necessary and in non-PCI bridge drivers as far as feasible without rototilling them. - As NEW_PCIB does a layering violation by activating resources at layers above pci(4) without previously bubbling up their allocation there, move the assignment of bus tags and handles from the bus_alloc_resource() to the bus_activate_resource() methods like at least the other NEW_PCIB enabled architectures do. This is somewhat unfortunate as previously sparc64 (ab)used resource activation to indicate whether SYS_RES_MEMORY resources should be mapped into KVA, which is only necessary if their going to be accessed via the pointer returned from rman_get_virtual() but not for bus_space(9) as the later always uses physical access on sparc64. Besides wasting KVA if we always map in SYS_RES_MEMORY resources, a driver also may deliberately not map them in if the firmware already has done so, possibly in a special way. So in order to still allow a driver to decide whether a SYS_RES_MEMORY resource should be mapped into KVA we let it indicate that by calling bus_space_map(9) with BUS_SPACE_MAP_LINEAR as actually documented in the bus_space(9) page. This is implemented by allocating a separate bus tag per SYS_RES_MEMORY resource and passing the resource via the previously unused bus tag cookie so we later on can call rman_set_virtual() in sparc64_bus_mem_map(). As a side effect this now also allows to actually indicate that a SYS_RES_MEMORY resource should be mapped in as cacheable and/or read-only via BUS_SPACE_MAP_CACHEABLE and BUS_SPACE_MAP_READONLY respectively. - Do some minor cleanup like taking advantage of rman_init_from_resource(), factor out the common part of bus tag allocation into a newly added sparc64_alloc_bus_tag(), hook up some missing newbus methods and replace some homegrown versions with the generic counterparts etc. - While at it, let apb_attach() (which can't use the generic NEW_PCIB code as APB bridges just don't have the base and limit registers implemented) regarding the config space registers cached in pcib_softc and the SYSCTL reporting nodes set up.
2011-10-02 23:22:38 +00:00
return (resource_list_release(rl, bus, child, type, rid, res));
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
}
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
static int
ebus_setup_intr(device_t dev, device_t child, struct resource *ires,
int flags, driver_filter_t *filt, driver_intr_t *intr, void *arg,
void **cookiep)
{
#ifndef SUN4V
struct ebus_softc *sc;
u_long vec;
sc = device_get_softc(dev);
if ((sc->sc_flags & EBUS_PCI) == 0) {
/*
* Make sure the vector is fully specified. This isn't
* necessarily the case with the PCI variant.
*/
vec = rman_get_start(ires);
if (INTIGN(vec) != sc->sc_ign) {
device_printf(dev,
"invalid interrupt vector 0x%lx\n", vec);
return (EINVAL);
}
/*
* As we rely on the interrupt controllers of the
* accompanying PCI-Express bridge ensure at least
* something is registered for this vector.
*/
if (intr_vectors[vec].iv_ic == NULL) {
device_printf(dev,
"invalid interrupt controller for vector 0x%lx\n",
vec);
return (EINVAL);
}
}
#endif
return (bus_generic_setup_intr(dev, child, ires, flags, filt, intr,
arg, cookiep));
}
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
static struct resource_list *
ebus_get_resource_list(device_t dev, device_t child)
{
struct ebus_devinfo *edi;
edi = device_get_ivars(child);
return (&edi->edi_rl);
}
- Convert these bus drivers to make use of the newly introduced set of ofw_bus_gen_get_*() for providing the ofw_bus KOBJ interface in order to reduce code duplication. - While here sync the various sparc64 bus drivers a bit (handle failure to attach a child gracefully instead of panicing, move the printing of child resources common to bus_print_child() and bus_probe_nomatch() implementations of a bus into a <bus>_print_res() function, ...) and fix some minor bugs and nits (plug memory leaks present when attaching a bus or child device fails, remove unused struct members, ...). Additional testing by: kris (central(4) and fhc(4))
2005-11-22 16:39:44 +00:00
static const struct ofw_bus_devinfo *
ebus_get_devinfo(device_t bus, device_t dev)
{
struct ebus_devinfo *edi;
edi = device_get_ivars(dev);
return (&edi->edi_obdinfo);
}
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
static struct ebus_devinfo *
- Convert these bus drivers to make use of the newly introduced set of ofw_bus_gen_get_*() for providing the ofw_bus KOBJ interface in order to reduce code duplication. - While here sync the various sparc64 bus drivers a bit (handle failure to attach a child gracefully instead of panicing, move the printing of child resources common to bus_print_child() and bus_probe_nomatch() implementations of a bus into a <bus>_print_res() function, ...) and fix some minor bugs and nits (plug memory leaks present when attaching a bus or child device fails, remove unused struct members, ...). Additional testing by: kris (central(4) and fhc(4))
2005-11-22 16:39:44 +00:00
ebus_setup_dinfo(device_t dev, struct ebus_softc *sc, phandle_t node)
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
{
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
struct isa_regs reg, *regs;
ofw_isa_intr_t intr, *intrs;
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
struct ebus_devinfo *edi;
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
uint64_t start;
uint32_t rintr;
int i, nintr, nreg, rv;
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
Back out M_* changes, per decision of the TRB. Approved by: trb
2003-02-19 05:47:46 +00:00
edi = malloc(sizeof(*edi), M_DEVBUF, M_ZERO | M_WAITOK);
- Convert these bus drivers to make use of the newly introduced set of ofw_bus_gen_get_*() for providing the ofw_bus KOBJ interface in order to reduce code duplication. - While here sync the various sparc64 bus drivers a bit (handle failure to attach a child gracefully instead of panicing, move the printing of child resources common to bus_print_child() and bus_probe_nomatch() implementations of a bus into a <bus>_print_res() function, ...) and fix some minor bugs and nits (plug memory leaks present when attaching a bus or child device fails, remove unused struct members, ...). Additional testing by: kris (central(4) and fhc(4))
2005-11-22 16:39:44 +00:00
if (ofw_bus_gen_setup_devinfo(&edi->edi_obdinfo, node) != 0) {
free(edi, M_DEVBUF);
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
return (NULL);
- Convert these bus drivers to make use of the newly introduced set of ofw_bus_gen_get_*() for providing the ofw_bus KOBJ interface in order to reduce code duplication. - While here sync the various sparc64 bus drivers a bit (handle failure to attach a child gracefully instead of panicing, move the printing of child resources common to bus_print_child() and bus_probe_nomatch() implementations of a bus into a <bus>_print_res() function, ...) and fix some minor bugs and nits (plug memory leaks present when attaching a bus or child device fails, remove unused struct members, ...). Additional testing by: kris (central(4) and fhc(4))
2005-11-22 16:39:44 +00:00
}
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
resource_list_init(&edi->edi_rl);
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
nreg = OF_getprop_alloc(node, "reg", sizeof(*regs), (void **)&regs);
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
if (nreg == -1) {
- Convert these bus drivers to make use of the newly introduced set of ofw_bus_gen_get_*() for providing the ofw_bus KOBJ interface in order to reduce code duplication. - While here sync the various sparc64 bus drivers a bit (handle failure to attach a child gracefully instead of panicing, move the printing of child resources common to bus_print_child() and bus_probe_nomatch() implementations of a bus into a <bus>_print_res() function, ...) and fix some minor bugs and nits (plug memory leaks present when attaching a bus or child device fails, remove unused struct members, ...). Additional testing by: kris (central(4) and fhc(4))
2005-11-22 16:39:44 +00:00
device_printf(dev, "<%s>: incomplete\n",
edi->edi_obdinfo.obd_name);
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
ebus_destroy_dinfo(edi);
return (NULL);
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
}
for (i = 0; i < nreg; i++) {
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
start = ISA_REG_PHYS(regs + i);
(void)resource_list_add(&edi->edi_rl, SYS_RES_MEMORY, i,
start, start + regs[i].size - 1, regs[i].size);
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
}
Use OF_prop_free instead of direct call to free(9) Reviewed by: marius
2016-05-18 23:39:31 +00:00
OF_prop_free(regs);
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
nintr = OF_getprop_alloc(node, "interrupts", sizeof(*intrs),
(void **)&intrs);
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
if (nintr == -1)
return (edi);
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
for (i = 0; i < nintr; i++) {
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
rv = 0;
if ((sc->sc_flags & EBUS_PCI) != 0) {
rintr = ofw_isa_route_intr(dev, node, &sc->sc_iinfo,
intrs[i]);
} else {
intr = intrs[i];
rv = ofw_bus_lookup_imap(node, &sc->sc_iinfo, &reg,
sizeof(reg), &intr, sizeof(intr), &rintr,
Simplify the ofw_bus_lookup_imap() API slightly: make it allocate maskbuf internally instead of requiring the caller to allocate it.
2013-12-17 15:11:24 +00:00
sizeof(rintr), NULL);
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
#ifndef SUN4V
if (rv != 0)
rintr = INTMAP_VEC(sc->sc_ign, rintr);
#endif
}
if ((sc->sc_flags & EBUS_PCI) == 0 ? rv == 0 :
rintr == PCI_INVALID_IRQ) {
- Convert these bus drivers to make use of the newly introduced set of ofw_bus_gen_get_*() for providing the ofw_bus KOBJ interface in order to reduce code duplication. - While here sync the various sparc64 bus drivers a bit (handle failure to attach a child gracefully instead of panicing, move the printing of child resources common to bus_print_child() and bus_probe_nomatch() implementations of a bus into a <bus>_print_res() function, ...) and fix some minor bugs and nits (plug memory leaks present when attaching a bus or child device fails, remove unused struct members, ...). Additional testing by: kris (central(4) and fhc(4))
2005-11-22 16:39:44 +00:00
device_printf(dev,
"<%s>: could not map EBus interrupt %d\n",
edi->edi_obdinfo.obd_name, intrs[i]);
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
continue;
- Convert these bus drivers to make use of the newly introduced set of ofw_bus_gen_get_*() for providing the ofw_bus KOBJ interface in order to reduce code duplication. - While here sync the various sparc64 bus drivers a bit (handle failure to attach a child gracefully instead of panicing, move the printing of child resources common to bus_print_child() and bus_probe_nomatch() implementations of a bus into a <bus>_print_res() function, ...) and fix some minor bugs and nits (plug memory leaks present when attaching a bus or child device fails, remove unused struct members, ...). Additional testing by: kris (central(4) and fhc(4))
2005-11-22 16:39:44 +00:00
}
- Add support for the JBus to EBus bridges which hang off of nexus(4) and are found in sun4u and sun4v machines based on the Fire ASIC. - Initialize the configuration space of the PCI to EBus variant the same way as OpenSolaris does.
2009-12-22 21:49:53 +00:00
(void)resource_list_add(&edi->edi_rl, SYS_RES_IRQ, i, rintr,
rintr, 1);
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
}
Use OF_prop_free instead of direct call to free(9) Reviewed by: marius
2016-05-18 23:39:31 +00:00
OF_prop_free(intrs);
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
return (edi);
}
static void
ebus_destroy_dinfo(struct ebus_devinfo *edi)
{
resource_list_free(&edi->edi_rl);
- Convert these bus drivers to make use of the newly introduced set of ofw_bus_gen_get_*() for providing the ofw_bus KOBJ interface in order to reduce code duplication. - While here sync the various sparc64 bus drivers a bit (handle failure to attach a child gracefully instead of panicing, move the printing of child resources common to bus_print_child() and bus_probe_nomatch() implementations of a bus into a <bus>_print_res() function, ...) and fix some minor bugs and nits (plug memory leaks present when attaching a bus or child device fails, remove unused struct members, ...). Additional testing by: kris (central(4) and fhc(4))
2005-11-22 16:39:44 +00:00
ofw_bus_gen_destroy_devinfo(&edi->edi_obdinfo);
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
free(edi, M_DEVBUF);
}
static int
ebus_print_res(struct ebus_devinfo *edi)
{
int retval;
retval = 0;
- Artificially using SYS_RES_IOPORT for EBus devices for reasons of compatibility with ISA devices while in fact all known EBus devices actually use memory space turned out to be not a good idea as so far there is only the 'rtc' device known to show up either on an EBus or ISA bus but not on any of the other busses used on sparc64. However there are quite a couple of them that show up on either EBus, FireHose or SBus. In order to save extra code in the respective drivers switch ebus(4) to actually use SYS_RES_MEMORY for the memory resources of its children. At least for transition still accept SYS_RES_IOPORT and silently change it to SYS_RES_MEMORY. [1] - In ebus_probe() use ofw_bus_get_name() instead of re-implementing it via ofw_bus_get_node() and OF_getprop(). - Remove some unused variables. - Use FBSDID. Discussed with: tmm (some time ago)
2005-05-19 18:11:46 +00:00
retval += resource_list_print_type(&edi->edi_rl, "addr", SYS_RES_MEMORY,
Fix the resource_list_print_type() calls to use uintmax_t. Missed a bunch from r297000.
2016-03-22 22:25:08 +00:00
"%#jx");
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
retval += resource_list_print_type(&edi->edi_rl, "irq", SYS_RES_IRQ,
Fix the resource_list_print_type() calls to use uintmax_t. Missed a bunch from r297000.
2016-03-22 22:25:08 +00:00
"%jd");
Add EBus support code, ported from NetBSD.
2001-11-09 20:23:38 +00:00
return (retval);
}
Reference in New Issue Copy Permalink