freebsd-dev/sys/powerpc/powermac/hrowpic.c

280 lines
6.8 KiB
C
Raw Normal View History

/*-
* Copyright 2003 by Peter Grehan. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* A driver for the PIC found in the Heathrow/Paddington MacIO chips.
* This was superseded by an OpenPIC in the Keylargo and beyond
* MacIO versions.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/kernel.h>
#include <sys/rman.h>
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/openfirm.h>
#include <machine/bus.h>
#include <machine/intr.h>
#include <machine/intr_machdep.h>
#include <machine/md_var.h>
#include <machine/nexusvar.h>
#include <machine/pio.h>
#include <machine/resource.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <powerpc/powermac/hrowpicvar.h>
#include "pic_if.h"
/*
* MacIO interface
*/
static int hrowpic_probe(device_t);
static int hrowpic_attach(device_t);
static void hrowpic_dispatch(device_t, struct trapframe *);
static void hrowpic_enable(device_t, u_int, u_int);
static void hrowpic_eoi(device_t, u_int);
static void hrowpic_ipi(device_t, u_int);
static void hrowpic_mask(device_t, u_int);
static void hrowpic_unmask(device_t, u_int);
static device_method_t hrowpic_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, hrowpic_probe),
DEVMETHOD(device_attach, hrowpic_attach),
/* PIC interface */
DEVMETHOD(pic_dispatch, hrowpic_dispatch),
DEVMETHOD(pic_enable, hrowpic_enable),
DEVMETHOD(pic_eoi, hrowpic_eoi),
DEVMETHOD(pic_ipi, hrowpic_ipi),
DEVMETHOD(pic_mask, hrowpic_mask),
DEVMETHOD(pic_unmask, hrowpic_unmask),
{ 0, 0 },
};
static driver_t hrowpic_driver = {
"hrowpic",
hrowpic_methods,
sizeof(struct hrowpic_softc)
};
static devclass_t hrowpic_devclass;
DRIVER_MODULE(hrowpic, macio, hrowpic_driver, hrowpic_devclass, 0, 0);
static uint32_t
hrowpic_read_reg(struct hrowpic_softc *sc, u_int reg, u_int bank)
{
if (bank == HPIC_PRIMARY)
reg += HPIC_1ST_OFFSET;
return (bus_space_read_4(sc->sc_bt, sc->sc_bh, reg));
}
static void
hrowpic_write_reg(struct hrowpic_softc *sc, u_int reg, u_int bank,
uint32_t val)
{
if (bank == HPIC_PRIMARY)
reg += HPIC_1ST_OFFSET;
bus_space_write_4(sc->sc_bt, sc->sc_bh, reg, val);
/* XXX Issue a read to force the write to complete. */
bus_space_read_4(sc->sc_bt, sc->sc_bh, reg);
}
static int
hrowpic_probe(device_t dev)
{
const char *type = ofw_bus_get_type(dev);
/*
* OpenPIC cells have a type of "open-pic", so this
* is sufficient to identify a Heathrow cell
*/
if (strcmp(type, "interrupt-controller") != 0)
return (ENXIO);
/*
* The description was already printed out in the nexus
* probe, so don't do it again here
*/
device_set_desc(dev, "Heathrow MacIO interrupt controller");
return (0);
}
static int
hrowpic_attach(device_t dev)
{
struct hrowpic_softc *sc;
sc = device_get_softc(dev);
sc->sc_dev = dev;
sc->sc_rrid = 0;
sc->sc_rres = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &sc->sc_rrid,
RF_ACTIVE);
if (sc->sc_rres == NULL) {
device_printf(dev, "Could not alloc mem resource!\n");
return (ENXIO);
}
sc->sc_bt = rman_get_bustag(sc->sc_rres);
sc->sc_bh = rman_get_bushandle(sc->sc_rres);
/*
* Disable all interrupt sources and clear outstanding interrupts
*/
hrowpic_write_reg(sc, HPIC_ENABLE, HPIC_PRIMARY, 0);
hrowpic_write_reg(sc, HPIC_CLEAR, HPIC_PRIMARY, 0xffffffff);
hrowpic_write_reg(sc, HPIC_ENABLE, HPIC_SECONDARY, 0);
hrowpic_write_reg(sc, HPIC_CLEAR, HPIC_SECONDARY, 0xffffffff);
powerpc_register_pic(dev, 64);
return (0);
}
/*
* Local routines
*/
static void
hrowpic_toggle_irq(struct hrowpic_softc *sc, int irq, int enable)
{
u_int roffset;
u_int rbit;
KASSERT((irq > 0) && (irq < HROWPIC_IRQMAX), ("en irq out of range"));
/*
* Calculate prim/sec register bank for the IRQ, update soft copy,
* and enable the IRQ as an interrupt source
*/
roffset = HPIC_INT_TO_BANK(irq);
rbit = HPIC_INT_TO_REGBIT(irq);
if (enable)
sc->sc_softreg[roffset] |= (1 << rbit);
else
sc->sc_softreg[roffset] &= ~(1 << rbit);
hrowpic_write_reg(sc, HPIC_ENABLE, roffset, sc->sc_softreg[roffset]);
}
/*
* PIC I/F methods.
*/
static void
hrowpic_dispatch(device_t dev, struct trapframe *tf)
{
struct hrowpic_softc *sc;
uint64_t mask;
uint32_t reg;
u_int irq;
sc = device_get_softc(dev);
while (1) {
mask = hrowpic_read_reg(sc, HPIC_STATUS, HPIC_SECONDARY);
reg = hrowpic_read_reg(sc, HPIC_STATUS, HPIC_PRIMARY);
mask = (mask << 32) | reg;
if (mask == 0)
break;
irq = 0;
while (irq < HROWPIC_IRQMAX) {
if (mask & 1)
powerpc_dispatch_intr(sc->sc_vector[irq], tf);
mask >>= 1;
irq++;
}
}
}
static void
hrowpic_enable(device_t dev, u_int irq, u_int vector)
{
struct hrowpic_softc *sc;
sc = device_get_softc(dev);
sc->sc_vector[irq] = vector;
hrowpic_toggle_irq(sc, irq, 1);
}
static void
hrowpic_eoi(device_t dev __unused, u_int irq __unused)
{
struct hrowpic_softc *sc;
int bank;
sc = device_get_softc(dev);
bank = (irq >= 32) ? HPIC_SECONDARY : HPIC_PRIMARY ;
hrowpic_write_reg(sc, HPIC_CLEAR, bank, 1U << (irq & 0x1f));
}
static void
hrowpic_ipi(device_t dev, u_int irq)
{
/* No SMP support. */
}
static void
hrowpic_mask(device_t dev, u_int irq)
{
struct hrowpic_softc *sc;
int bank;
sc = device_get_softc(dev);
hrowpic_toggle_irq(sc, irq, 0);
bank = (irq >= 32) ? HPIC_SECONDARY : HPIC_PRIMARY ;
hrowpic_write_reg(sc, HPIC_CLEAR, bank, 1U << (irq & 0x1f));
}
static void
hrowpic_unmask(device_t dev, u_int irq)
{
struct hrowpic_softc *sc;
sc = device_get_softc(dev);
hrowpic_toggle_irq(sc, irq, 1);
}