freebsd-dev/usr.sbin/eeprom/ofw_options.c

311 lines
8.2 KiB
C
Raw Normal View History

Add eeprom(8), a utility to display and modify system configurations stored in EEPROM or NVRAM. It's inspired by the NetBSD eeprom(8) and the SunOS/Solaris eeprom(1M) utilities. Currently, this eeprom(8) only supports systems equipped with Open Firmware and is only tested on Sun machines but should work on any platform using Open Firmware. A bit more specific, eeprom(8) can be used on these systems to do the same under FreeBSD as can be done using the printenv and setenv commandos in the boot monitor. One thing that only hardly can be done using the boot monitor but easily with eeprom(8) is to write a logo to the "oem-logo" property. eeprom(8) may also be useful to recover the boot monitor password (in the default configuration only as root, of course), i.e. when the boot monitor allows you to boot but you can't alter the configuration because the password is unknown. The man page may also be a useful reference of the various configuration variables. The idea of eeprom(8) is that handlers can be written to add support for any firmware that stores such configuration in EEPROM or NVRAM; sort of e.g. eeprom(1M) on Solaris/x86 is used to turn PAE-support on and off (stored in a file then, not hardware). In FreeBSD, a candidate for this would be a handler for the EFI boot environment for FreeBSD/ia64. eeprom(8) uses some code from NetBSD (eeprom.c and the base for eeprom.8), the handler for the Open Firmware /options node (ofw_options.[c,h]) was written using ofw_util.[c,h] from ofwdump(8). Reviewed by: ru (slightly earlier version of the man page)
2004-05-22 16:56:04 +00:00
/*-
* Copyright (c) 2004 Marius Strobl
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* Handlers for Open Firmware /options node.
*/
#include <sys/types.h>
#include <dev/ofw/openfirm.h>
#include <err.h>
#include <fcntl.h>
#include <readpassphrase.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sysexits.h>
#include <unistd.h>
#include "ofw_options.h"
#include "ofw_util.h"
#define OFWO_LOGO 512
#define OFWO_MAXPROP 31
#define OFWO_MAXPWD 8
struct ofwo_extabent {
const char *ex_prop;
int (*ex_handler)(const struct ofwo_extabent *, int,
const void *, int, const char *);
Add eeprom(8), a utility to display and modify system configurations stored in EEPROM or NVRAM. It's inspired by the NetBSD eeprom(8) and the SunOS/Solaris eeprom(1M) utilities. Currently, this eeprom(8) only supports systems equipped with Open Firmware and is only tested on Sun machines but should work on any platform using Open Firmware. A bit more specific, eeprom(8) can be used on these systems to do the same under FreeBSD as can be done using the printenv and setenv commandos in the boot monitor. One thing that only hardly can be done using the boot monitor but easily with eeprom(8) is to write a logo to the "oem-logo" property. eeprom(8) may also be useful to recover the boot monitor password (in the default configuration only as root, of course), i.e. when the boot monitor allows you to boot but you can't alter the configuration because the password is unknown. The man page may also be a useful reference of the various configuration variables. The idea of eeprom(8) is that handlers can be written to add support for any firmware that stores such configuration in EEPROM or NVRAM; sort of e.g. eeprom(1M) on Solaris/x86 is used to turn PAE-support on and off (stored in a file then, not hardware). In FreeBSD, a candidate for this would be a handler for the EFI boot environment for FreeBSD/ia64. eeprom(8) uses some code from NetBSD (eeprom.c and the base for eeprom.8), the handler for the Open Firmware /options node (ofw_options.[c,h]) was written using ofw_util.[c,h] from ofwdump(8). Reviewed by: ru (slightly earlier version of the man page)
2004-05-22 16:56:04 +00:00
};
static int ofwo_oemlogo(const struct ofwo_extabent *, int, const void *,
int, const char *);
static int ofwo_secmode(const struct ofwo_extabent *, int, const void *,
int, const char *);
static int ofwo_secpwd(const struct ofwo_extabent *, int, const void *,
int, const char *);
Add eeprom(8), a utility to display and modify system configurations stored in EEPROM or NVRAM. It's inspired by the NetBSD eeprom(8) and the SunOS/Solaris eeprom(1M) utilities. Currently, this eeprom(8) only supports systems equipped with Open Firmware and is only tested on Sun machines but should work on any platform using Open Firmware. A bit more specific, eeprom(8) can be used on these systems to do the same under FreeBSD as can be done using the printenv and setenv commandos in the boot monitor. One thing that only hardly can be done using the boot monitor but easily with eeprom(8) is to write a logo to the "oem-logo" property. eeprom(8) may also be useful to recover the boot monitor password (in the default configuration only as root, of course), i.e. when the boot monitor allows you to boot but you can't alter the configuration because the password is unknown. The man page may also be a useful reference of the various configuration variables. The idea of eeprom(8) is that handlers can be written to add support for any firmware that stores such configuration in EEPROM or NVRAM; sort of e.g. eeprom(1M) on Solaris/x86 is used to turn PAE-support on and off (stored in a file then, not hardware). In FreeBSD, a candidate for this would be a handler for the EFI boot environment for FreeBSD/ia64. eeprom(8) uses some code from NetBSD (eeprom.c and the base for eeprom.8), the handler for the Open Firmware /options node (ofw_options.[c,h]) was written using ofw_util.[c,h] from ofwdump(8). Reviewed by: ru (slightly earlier version of the man page)
2004-05-22 16:56:04 +00:00
static const struct ofwo_extabent ofwo_extab[] = {
Add eeprom(8), a utility to display and modify system configurations stored in EEPROM or NVRAM. It's inspired by the NetBSD eeprom(8) and the SunOS/Solaris eeprom(1M) utilities. Currently, this eeprom(8) only supports systems equipped with Open Firmware and is only tested on Sun machines but should work on any platform using Open Firmware. A bit more specific, eeprom(8) can be used on these systems to do the same under FreeBSD as can be done using the printenv and setenv commandos in the boot monitor. One thing that only hardly can be done using the boot monitor but easily with eeprom(8) is to write a logo to the "oem-logo" property. eeprom(8) may also be useful to recover the boot monitor password (in the default configuration only as root, of course), i.e. when the boot monitor allows you to boot but you can't alter the configuration because the password is unknown. The man page may also be a useful reference of the various configuration variables. The idea of eeprom(8) is that handlers can be written to add support for any firmware that stores such configuration in EEPROM or NVRAM; sort of e.g. eeprom(1M) on Solaris/x86 is used to turn PAE-support on and off (stored in a file then, not hardware). In FreeBSD, a candidate for this would be a handler for the EFI boot environment for FreeBSD/ia64. eeprom(8) uses some code from NetBSD (eeprom.c and the base for eeprom.8), the handler for the Open Firmware /options node (ofw_options.[c,h]) was written using ofw_util.[c,h] from ofwdump(8). Reviewed by: ru (slightly earlier version of the man page)
2004-05-22 16:56:04 +00:00
{ "oem-logo", ofwo_oemlogo },
{ "security-mode", ofwo_secmode },
{ "security-password", ofwo_secpwd },
{ NULL, NULL }
};
static int ofwo_setpass(int);
static int ofwo_setstr(int, const void *, int, const char *, const char *);
Add eeprom(8), a utility to display and modify system configurations stored in EEPROM or NVRAM. It's inspired by the NetBSD eeprom(8) and the SunOS/Solaris eeprom(1M) utilities. Currently, this eeprom(8) only supports systems equipped with Open Firmware and is only tested on Sun machines but should work on any platform using Open Firmware. A bit more specific, eeprom(8) can be used on these systems to do the same under FreeBSD as can be done using the printenv and setenv commandos in the boot monitor. One thing that only hardly can be done using the boot monitor but easily with eeprom(8) is to write a logo to the "oem-logo" property. eeprom(8) may also be useful to recover the boot monitor password (in the default configuration only as root, of course), i.e. when the boot monitor allows you to boot but you can't alter the configuration because the password is unknown. The man page may also be a useful reference of the various configuration variables. The idea of eeprom(8) is that handlers can be written to add support for any firmware that stores such configuration in EEPROM or NVRAM; sort of e.g. eeprom(1M) on Solaris/x86 is used to turn PAE-support on and off (stored in a file then, not hardware). In FreeBSD, a candidate for this would be a handler for the EFI boot environment for FreeBSD/ia64. eeprom(8) uses some code from NetBSD (eeprom.c and the base for eeprom.8), the handler for the Open Firmware /options node (ofw_options.[c,h]) was written using ofw_util.[c,h] from ofwdump(8). Reviewed by: ru (slightly earlier version of the man page)
2004-05-22 16:56:04 +00:00
static __inline void
ofwo_printprop(const char *prop, const char* buf, int buflen)
{
printf("%s: %.*s\n", prop, buflen, buf);
}
Add eeprom(8), a utility to display and modify system configurations stored in EEPROM or NVRAM. It's inspired by the NetBSD eeprom(8) and the SunOS/Solaris eeprom(1M) utilities. Currently, this eeprom(8) only supports systems equipped with Open Firmware and is only tested on Sun machines but should work on any platform using Open Firmware. A bit more specific, eeprom(8) can be used on these systems to do the same under FreeBSD as can be done using the printenv and setenv commandos in the boot monitor. One thing that only hardly can be done using the boot monitor but easily with eeprom(8) is to write a logo to the "oem-logo" property. eeprom(8) may also be useful to recover the boot monitor password (in the default configuration only as root, of course), i.e. when the boot monitor allows you to boot but you can't alter the configuration because the password is unknown. The man page may also be a useful reference of the various configuration variables. The idea of eeprom(8) is that handlers can be written to add support for any firmware that stores such configuration in EEPROM or NVRAM; sort of e.g. eeprom(1M) on Solaris/x86 is used to turn PAE-support on and off (stored in a file then, not hardware). In FreeBSD, a candidate for this would be a handler for the EFI boot environment for FreeBSD/ia64. eeprom(8) uses some code from NetBSD (eeprom.c and the base for eeprom.8), the handler for the Open Firmware /options node (ofw_options.[c,h]) was written using ofw_util.[c,h] from ofwdump(8). Reviewed by: ru (slightly earlier version of the man page)
2004-05-22 16:56:04 +00:00
static int
ofwo_oemlogo(const struct ofwo_extabent *exent, int fd, const void *buf,
int buflen, const char *val)
Add eeprom(8), a utility to display and modify system configurations stored in EEPROM or NVRAM. It's inspired by the NetBSD eeprom(8) and the SunOS/Solaris eeprom(1M) utilities. Currently, this eeprom(8) only supports systems equipped with Open Firmware and is only tested on Sun machines but should work on any platform using Open Firmware. A bit more specific, eeprom(8) can be used on these systems to do the same under FreeBSD as can be done using the printenv and setenv commandos in the boot monitor. One thing that only hardly can be done using the boot monitor but easily with eeprom(8) is to write a logo to the "oem-logo" property. eeprom(8) may also be useful to recover the boot monitor password (in the default configuration only as root, of course), i.e. when the boot monitor allows you to boot but you can't alter the configuration because the password is unknown. The man page may also be a useful reference of the various configuration variables. The idea of eeprom(8) is that handlers can be written to add support for any firmware that stores such configuration in EEPROM or NVRAM; sort of e.g. eeprom(1M) on Solaris/x86 is used to turn PAE-support on and off (stored in a file then, not hardware). In FreeBSD, a candidate for this would be a handler for the EFI boot environment for FreeBSD/ia64. eeprom(8) uses some code from NetBSD (eeprom.c and the base for eeprom.8), the handler for the Open Firmware /options node (ofw_options.[c,h]) was written using ofw_util.[c,h] from ofwdump(8). Reviewed by: ru (slightly earlier version of the man page)
2004-05-22 16:56:04 +00:00
{
int lfd;
char logo[OFWO_LOGO + 1];
if (val) {
if (val[0] == '\0')
ofw_setprop(fd, ofw_optnode(fd), exent->ex_prop, "", 1);
else {
if ((lfd = open(val, O_RDONLY)) == -1) {
warn("could not open '%s'", val);
return (EX_USAGE);
}
if (read(lfd, logo, OFWO_LOGO) != OFWO_LOGO ||
lseek(lfd, 0, SEEK_END) != OFWO_LOGO) {
close(lfd);
warnx("logo '%s' has wrong size.", val);
return (EX_USAGE);
}
close(lfd);
logo[OFWO_LOGO] = '\0';
if (ofw_setprop(fd, ofw_optnode(fd), exent->ex_prop,
logo, OFWO_LOGO + 1) != OFWO_LOGO)
errx(EX_IOERR, "writing logo failed.");
}
} else
if (buflen != 0)
printf("%s: <logo data>\n", exent->ex_prop);
else
ofwo_printprop(exent->ex_prop, (const char *)buf,
buflen);
return (EX_OK);
}
static int
ofwo_secmode(const struct ofwo_extabent *exent, int fd, const void *buf,
int buflen, const char *val)
Add eeprom(8), a utility to display and modify system configurations stored in EEPROM or NVRAM. It's inspired by the NetBSD eeprom(8) and the SunOS/Solaris eeprom(1M) utilities. Currently, this eeprom(8) only supports systems equipped with Open Firmware and is only tested on Sun machines but should work on any platform using Open Firmware. A bit more specific, eeprom(8) can be used on these systems to do the same under FreeBSD as can be done using the printenv and setenv commandos in the boot monitor. One thing that only hardly can be done using the boot monitor but easily with eeprom(8) is to write a logo to the "oem-logo" property. eeprom(8) may also be useful to recover the boot monitor password (in the default configuration only as root, of course), i.e. when the boot monitor allows you to boot but you can't alter the configuration because the password is unknown. The man page may also be a useful reference of the various configuration variables. The idea of eeprom(8) is that handlers can be written to add support for any firmware that stores such configuration in EEPROM or NVRAM; sort of e.g. eeprom(1M) on Solaris/x86 is used to turn PAE-support on and off (stored in a file then, not hardware). In FreeBSD, a candidate for this would be a handler for the EFI boot environment for FreeBSD/ia64. eeprom(8) uses some code from NetBSD (eeprom.c and the base for eeprom.8), the handler for the Open Firmware /options node (ofw_options.[c,h]) was written using ofw_util.[c,h] from ofwdump(8). Reviewed by: ru (slightly earlier version of the man page)
2004-05-22 16:56:04 +00:00
{
int res;
if (val) {
if (strcmp(val, "full") == 0 || strcmp(val, "command") == 0) {
if ((res = ofwo_setpass(fd)) != EX_OK)
return (res);
if ((res = ofwo_setstr(fd, buf, buflen, exent->ex_prop,
val)) != EX_OK)
ofw_setprop(fd, ofw_optnode(fd),
"security-password", "", 1);
return (res);
}
if (strcmp(val, "none") == 0) {
ofw_setprop(fd, ofw_optnode(fd), "security-password",
"", 1);
return (ofwo_setstr(fd, buf, buflen, exent->ex_prop,
val));
}
return (EX_DATAERR);
} else
ofwo_printprop(exent->ex_prop, (const char *)buf, buflen);
return (EX_OK);
}
static int
ofwo_secpwd(const struct ofwo_extabent *exent, int fd, const void *buf,
int buflen, const char *val)
Add eeprom(8), a utility to display and modify system configurations stored in EEPROM or NVRAM. It's inspired by the NetBSD eeprom(8) and the SunOS/Solaris eeprom(1M) utilities. Currently, this eeprom(8) only supports systems equipped with Open Firmware and is only tested on Sun machines but should work on any platform using Open Firmware. A bit more specific, eeprom(8) can be used on these systems to do the same under FreeBSD as can be done using the printenv and setenv commandos in the boot monitor. One thing that only hardly can be done using the boot monitor but easily with eeprom(8) is to write a logo to the "oem-logo" property. eeprom(8) may also be useful to recover the boot monitor password (in the default configuration only as root, of course), i.e. when the boot monitor allows you to boot but you can't alter the configuration because the password is unknown. The man page may also be a useful reference of the various configuration variables. The idea of eeprom(8) is that handlers can be written to add support for any firmware that stores such configuration in EEPROM or NVRAM; sort of e.g. eeprom(1M) on Solaris/x86 is used to turn PAE-support on and off (stored in a file then, not hardware). In FreeBSD, a candidate for this would be a handler for the EFI boot environment for FreeBSD/ia64. eeprom(8) uses some code from NetBSD (eeprom.c and the base for eeprom.8), the handler for the Open Firmware /options node (ofw_options.[c,h]) was written using ofw_util.[c,h] from ofwdump(8). Reviewed by: ru (slightly earlier version of the man page)
2004-05-22 16:56:04 +00:00
{
void *pbuf;
int len, pblen, rv;
pblen = 0;
rv = EX_OK;
pbuf = NULL;
if (val) {
len = ofw_getprop_alloc(fd, ofw_optnode(fd), "security-mode",
&pbuf, &pblen, 1);
if (len <= 0 || strncmp("none", (char *)pbuf, len) == 0) {
rv = EX_CONFIG;
warnx("no security mode set.");
} else if (strncmp("command", (char *)pbuf, len) == 0 ||
strncmp("full", (char *)pbuf, len) == 0) {
rv = ofwo_setpass(fd);
} else {
rv = EX_CONFIG;
warnx("invalid security mode.");
}
} else
ofwo_printprop(exent->ex_prop, (const char *)buf, buflen);
if (pbuf != NULL)
free(pbuf);
return (rv);
}
static int
ofwo_setpass(int fd)
{
char pwd1[OFWO_MAXPWD + 1], pwd2[OFWO_MAXPWD + 1];
if (readpassphrase("New password:", pwd1, sizeof(pwd1),
RPP_ECHO_OFF | RPP_REQUIRE_TTY) == NULL ||
readpassphrase("Retype new password:", pwd2, sizeof(pwd2),
RPP_ECHO_OFF | RPP_REQUIRE_TTY) == NULL)
errx(EX_USAGE, "failed to get password.");
if (strlen(pwd1) == 0) {
printf("Password unchanged.\n");
return (EX_OK);
}
if (strcmp(pwd1, pwd2) != 0) {
printf("Mismatch - password unchanged.\n");
return (EX_USAGE);
}
ofw_setprop(fd, ofw_optnode(fd), "security-password", pwd1,
strlen(pwd1) + 1);
return (EX_OK);
}
static int
ofwo_setstr(int fd, const void *buf, int buflen, const char *prop,
const char *val)
{
void *pbuf;
int len, pblen, rv;
phandle_t optnode;
char *oval;
pblen = 0;
rv = EX_OK;
pbuf = NULL;
optnode = ofw_optnode(fd);
ofw_setprop(fd, optnode, prop, val, strlen(val) + 1);
len = ofw_getprop_alloc(fd, optnode, prop, &pbuf, &pblen, 1);
if (len < 0 || strncmp(val, (char *)pbuf, len) != 0) {
/*
* The value is too long for this property and the OFW has
* truncated it to fit or the value is illegal and a legal
* one has been written instead (e.g. attempted to write
* "foobar" to a "true"/"false"-property) - try to recover
* the old value.
*/
rv = EX_DATAERR;
if ((oval = malloc(buflen + 1)) == NULL)
err(EX_OSERR, "malloc() failed.");
strncpy(oval, buf, buflen);
oval[buflen] = '\0';
len = ofw_setprop(fd, optnode, prop, oval, buflen + 1);
if (len != buflen)
errx(EX_IOERR, "recovery of old value failed.");
free(oval);
goto out;
}
printf("%s: %.*s%s->%s%.*s\n", prop, buflen, (const char *)buf,
buflen > 0 ? " " : "", len > 0 ? " " : "", len, (char *)pbuf);
out:
if (pbuf != NULL)
free(pbuf);
return (rv);
}
void
ofwo_dump(void)
{
void *pbuf;
int fd, len, nlen, pblen;
phandle_t optnode;
char prop[OFWO_MAXPROP + 1];
const struct ofwo_extabent *ex;
Add eeprom(8), a utility to display and modify system configurations stored in EEPROM or NVRAM. It's inspired by the NetBSD eeprom(8) and the SunOS/Solaris eeprom(1M) utilities. Currently, this eeprom(8) only supports systems equipped with Open Firmware and is only tested on Sun machines but should work on any platform using Open Firmware. A bit more specific, eeprom(8) can be used on these systems to do the same under FreeBSD as can be done using the printenv and setenv commandos in the boot monitor. One thing that only hardly can be done using the boot monitor but easily with eeprom(8) is to write a logo to the "oem-logo" property. eeprom(8) may also be useful to recover the boot monitor password (in the default configuration only as root, of course), i.e. when the boot monitor allows you to boot but you can't alter the configuration because the password is unknown. The man page may also be a useful reference of the various configuration variables. The idea of eeprom(8) is that handlers can be written to add support for any firmware that stores such configuration in EEPROM or NVRAM; sort of e.g. eeprom(1M) on Solaris/x86 is used to turn PAE-support on and off (stored in a file then, not hardware). In FreeBSD, a candidate for this would be a handler for the EFI boot environment for FreeBSD/ia64. eeprom(8) uses some code from NetBSD (eeprom.c and the base for eeprom.8), the handler for the Open Firmware /options node (ofw_options.[c,h]) was written using ofw_util.[c,h] from ofwdump(8). Reviewed by: ru (slightly earlier version of the man page)
2004-05-22 16:56:04 +00:00
pblen = 0;
pbuf = NULL;
fd = ofw_open(O_RDONLY);
optnode = ofw_optnode(fd);
for (nlen = ofw_firstprop(fd, optnode, prop, sizeof(prop)); nlen != 0;
nlen = ofw_nextprop(fd, optnode, prop, prop, sizeof(prop))) {
Add eeprom(8), a utility to display and modify system configurations stored in EEPROM or NVRAM. It's inspired by the NetBSD eeprom(8) and the SunOS/Solaris eeprom(1M) utilities. Currently, this eeprom(8) only supports systems equipped with Open Firmware and is only tested on Sun machines but should work on any platform using Open Firmware. A bit more specific, eeprom(8) can be used on these systems to do the same under FreeBSD as can be done using the printenv and setenv commandos in the boot monitor. One thing that only hardly can be done using the boot monitor but easily with eeprom(8) is to write a logo to the "oem-logo" property. eeprom(8) may also be useful to recover the boot monitor password (in the default configuration only as root, of course), i.e. when the boot monitor allows you to boot but you can't alter the configuration because the password is unknown. The man page may also be a useful reference of the various configuration variables. The idea of eeprom(8) is that handlers can be written to add support for any firmware that stores such configuration in EEPROM or NVRAM; sort of e.g. eeprom(1M) on Solaris/x86 is used to turn PAE-support on and off (stored in a file then, not hardware). In FreeBSD, a candidate for this would be a handler for the EFI boot environment for FreeBSD/ia64. eeprom(8) uses some code from NetBSD (eeprom.c and the base for eeprom.8), the handler for the Open Firmware /options node (ofw_options.[c,h]) was written using ofw_util.[c,h] from ofwdump(8). Reviewed by: ru (slightly earlier version of the man page)
2004-05-22 16:56:04 +00:00
len = ofw_getprop_alloc(fd, optnode, prop, &pbuf, &pblen, 1);
if (len < 0)
continue;
if (strcmp(prop, "name") == 0)
continue;
for (ex = ofwo_extab; ex->ex_prop != NULL; ++ex)
if (strcmp(ex->ex_prop, prop) == 0)
break;
if (ex->ex_prop != NULL)
(*ex->ex_handler)(ex, fd, pbuf, len, NULL);
else
ofwo_printprop(prop, (char *)pbuf, len);
}
if (pbuf != NULL)
free(pbuf);
ofw_close(fd);
}
int
ofwo_action(const char *prop, const char *val)
{
void *pbuf;
int fd, len, pblen, rv;
const struct ofwo_extabent *ex;
Add eeprom(8), a utility to display and modify system configurations stored in EEPROM or NVRAM. It's inspired by the NetBSD eeprom(8) and the SunOS/Solaris eeprom(1M) utilities. Currently, this eeprom(8) only supports systems equipped with Open Firmware and is only tested on Sun machines but should work on any platform using Open Firmware. A bit more specific, eeprom(8) can be used on these systems to do the same under FreeBSD as can be done using the printenv and setenv commandos in the boot monitor. One thing that only hardly can be done using the boot monitor but easily with eeprom(8) is to write a logo to the "oem-logo" property. eeprom(8) may also be useful to recover the boot monitor password (in the default configuration only as root, of course), i.e. when the boot monitor allows you to boot but you can't alter the configuration because the password is unknown. The man page may also be a useful reference of the various configuration variables. The idea of eeprom(8) is that handlers can be written to add support for any firmware that stores such configuration in EEPROM or NVRAM; sort of e.g. eeprom(1M) on Solaris/x86 is used to turn PAE-support on and off (stored in a file then, not hardware). In FreeBSD, a candidate for this would be a handler for the EFI boot environment for FreeBSD/ia64. eeprom(8) uses some code from NetBSD (eeprom.c and the base for eeprom.8), the handler for the Open Firmware /options node (ofw_options.[c,h]) was written using ofw_util.[c,h] from ofwdump(8). Reviewed by: ru (slightly earlier version of the man page)
2004-05-22 16:56:04 +00:00
pblen = 0;
rv = EX_OK;
pbuf = NULL;
if (strcmp(prop, "name") == 0)
return (EX_UNAVAILABLE);
if (val)
fd = ofw_open(O_RDWR);
else
fd = ofw_open(O_RDONLY);
len = ofw_getprop_alloc(fd, ofw_optnode(fd), prop, &pbuf, &pblen, 1);
Add eeprom(8), a utility to display and modify system configurations stored in EEPROM or NVRAM. It's inspired by the NetBSD eeprom(8) and the SunOS/Solaris eeprom(1M) utilities. Currently, this eeprom(8) only supports systems equipped with Open Firmware and is only tested on Sun machines but should work on any platform using Open Firmware. A bit more specific, eeprom(8) can be used on these systems to do the same under FreeBSD as can be done using the printenv and setenv commandos in the boot monitor. One thing that only hardly can be done using the boot monitor but easily with eeprom(8) is to write a logo to the "oem-logo" property. eeprom(8) may also be useful to recover the boot monitor password (in the default configuration only as root, of course), i.e. when the boot monitor allows you to boot but you can't alter the configuration because the password is unknown. The man page may also be a useful reference of the various configuration variables. The idea of eeprom(8) is that handlers can be written to add support for any firmware that stores such configuration in EEPROM or NVRAM; sort of e.g. eeprom(1M) on Solaris/x86 is used to turn PAE-support on and off (stored in a file then, not hardware). In FreeBSD, a candidate for this would be a handler for the EFI boot environment for FreeBSD/ia64. eeprom(8) uses some code from NetBSD (eeprom.c and the base for eeprom.8), the handler for the Open Firmware /options node (ofw_options.[c,h]) was written using ofw_util.[c,h] from ofwdump(8). Reviewed by: ru (slightly earlier version of the man page)
2004-05-22 16:56:04 +00:00
if (len < 0) {
rv = EX_UNAVAILABLE;
goto out;
}
for (ex = ofwo_extab; ex->ex_prop != NULL; ++ex)
if (strcmp(ex->ex_prop, prop) == 0)
break;
if (ex->ex_prop != NULL)
rv = (*ex->ex_handler)(ex, fd, pbuf, len, val);
else if (val)
rv = ofwo_setstr(fd, pbuf, len, prop, val);
else
Add eeprom(8), a utility to display and modify system configurations stored in EEPROM or NVRAM. It's inspired by the NetBSD eeprom(8) and the SunOS/Solaris eeprom(1M) utilities. Currently, this eeprom(8) only supports systems equipped with Open Firmware and is only tested on Sun machines but should work on any platform using Open Firmware. A bit more specific, eeprom(8) can be used on these systems to do the same under FreeBSD as can be done using the printenv and setenv commandos in the boot monitor. One thing that only hardly can be done using the boot monitor but easily with eeprom(8) is to write a logo to the "oem-logo" property. eeprom(8) may also be useful to recover the boot monitor password (in the default configuration only as root, of course), i.e. when the boot monitor allows you to boot but you can't alter the configuration because the password is unknown. The man page may also be a useful reference of the various configuration variables. The idea of eeprom(8) is that handlers can be written to add support for any firmware that stores such configuration in EEPROM or NVRAM; sort of e.g. eeprom(1M) on Solaris/x86 is used to turn PAE-support on and off (stored in a file then, not hardware). In FreeBSD, a candidate for this would be a handler for the EFI boot environment for FreeBSD/ia64. eeprom(8) uses some code from NetBSD (eeprom.c and the base for eeprom.8), the handler for the Open Firmware /options node (ofw_options.[c,h]) was written using ofw_util.[c,h] from ofwdump(8). Reviewed by: ru (slightly earlier version of the man page)
2004-05-22 16:56:04 +00:00
ofwo_printprop(prop, (char *)pbuf, len);
out:
if (pbuf != NULL)
free(pbuf);
ofw_close(fd);
return (rv);
}