d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
77ad3c4146
freebsd-dev/sys/dev/cxgbe/t4_main.c

7085 lines
176 KiB
C
Raw Normal View History

cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/*-
* Copyright (c) 2011 Chelsio Communications, Inc.
* All rights reserved.
* Written by: Navdeep Parhar <np@FreeBSD.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_inet.h"
cxgbe(4): support for IPv6 TSO and LRO. Submitted by: bz (this is a modified version of that patch)
2012-06-29 19:51:06 +00:00
#include "opt_inet6.h"
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
#include <sys/param.h>
#include <sys/conf.h>
#include <sys/priv.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <sys/module.h>
Resume tx immediately in response to an SGE egress update from the hardware. MFC after: 1 week
2011-03-05 03:06:38 +00:00
#include <sys/malloc.h>
#include <sys/queue.h>
#include <sys/taskqueue.h>
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
#include <sys/pciio.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pci_private.h>
#include <sys/firmware.h>
Display holdoff timers and packet counts as a list of numbers. MFC after: 1 week
2011-03-09 21:07:09 +00:00
#include <sys/sbuf.h>
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
#include <sys/smp.h>
#include <sys/socket.h>
#include <sys/sockio.h>
#include <sys/sysctl.h>
#include <net/ethernet.h>
#include <net/if.h>
#include <net/if_types.h>
#include <net/if_dl.h>
Add missing header. The test for VLAN_CAPABILITIES later in the file doesn't make sense without it. MFC after: 3 days
2011-05-17 00:40:11 +00:00
#include <net/if_vlan_var.h>
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
#if defined(__i386__) || defined(__amd64__)
#include <vm/vm.h>
#include <vm/pmap.h>
#endif
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
#include "common/common.h"
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
#include "common/t4_msg.h"
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
#include "common/t4_regs.h"
#include "common/t4_regs_values.h"
#include "t4_ioctl.h"
L2 table code. This is enough to get the T4's switch + L2 rewrite filters working. (All other filters - switch without L2 info rewrite, steer, and drop - were already fully-functional). Some contrived examples of "switch" filters with L2 rewriting: # cxgbetool t4nex0 iport 0 dport 80 action switch vlan +9 eport 3 Intercept all packets received on physical port 0 with TCP port 80 as destination, insert a vlan tag with VID 9, and send them out of port 3. # cxgbetool t4nex0 sip 192.168.1.1/32 ivlan 5 action switch \ vlan =9 smac aa:bb:cc:dd:ee:ff eport 0 Intercept all packets (received on any port) with source IP address 192.168.1.1 and VLAN id 5, rewrite the VLAN id to 9, rewrite source mac to aa:bb:cc:dd:ee:ff, and send it out of port 0. MFC after: 1 week
2011-05-30 21:07:26 +00:00
#include "t4_l2t.h"
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/* T4 bus driver interface */
static int t4_probe(device_t);
static int t4_attach(device_t);
static int t4_detach(device_t);
static device_method_t t4_methods[] = {
DEVMETHOD(device_probe, t4_probe),
DEVMETHOD(device_attach, t4_attach),
DEVMETHOD(device_detach, t4_detach),
- There's no need to overwrite the default device method with the default one. Interestingly, these are actually the default for quite some time (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9) since r52045) but even recently added device drivers do this unnecessarily. Discussed with: jhb, marcel - While at it, use DEVMETHOD_END. Discussed with: jhb - Also while at it, use __FBSDID.
2011-11-22 21:28:20 +00:00
DEVMETHOD_END
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
};
static driver_t t4_driver = {
"t4nex",
t4_methods,
sizeof(struct adapter)
};
/* T4 port (cxgbe) interface */
static int cxgbe_probe(device_t);
static int cxgbe_attach(device_t);
static int cxgbe_detach(device_t);
static device_method_t cxgbe_methods[] = {
DEVMETHOD(device_probe, cxgbe_probe),
DEVMETHOD(device_attach, cxgbe_attach),
DEVMETHOD(device_detach, cxgbe_detach),
{ 0, 0 }
};
static driver_t cxgbe_driver = {
"cxgbe",
cxgbe_methods,
sizeof(struct port_info)
};
static d_ioctl_t t4_ioctl;
static d_open_t t4_open;
static d_close_t t4_close;
static struct cdevsw t4_cdevsw = {
.d_version = D_VERSION,
.d_flags = 0,
.d_open = t4_open,
.d_close = t4_close,
.d_ioctl = t4_ioctl,
.d_name = "t4nex",
};
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
/* T5 bus driver interface */
static int t5_probe(device_t);
static device_method_t t5_methods[] = {
DEVMETHOD(device_probe, t5_probe),
DEVMETHOD(device_attach, t4_attach),
DEVMETHOD(device_detach, t4_detach),
DEVMETHOD_END
};
static driver_t t5_driver = {
"t5nex",
t5_methods,
sizeof(struct adapter)
};
/* T5 port (cxl) interface */
static driver_t cxl_driver = {
"cxl",
cxgbe_methods,
sizeof(struct port_info)
};
static struct cdevsw t5_cdevsw = {
.d_version = D_VERSION,
.d_flags = 0,
.d_open = t4_open,
.d_close = t4_close,
.d_ioctl = t4_ioctl,
.d_name = "t5nex",
};
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/* ifnet + media interface */
static void cxgbe_init(void *);
static int cxgbe_ioctl(struct ifnet *, unsigned long, caddr_t);
static int cxgbe_transmit(struct ifnet *, struct mbuf *);
static void cxgbe_qflush(struct ifnet *);
static int cxgbe_media_change(struct ifnet *);
static void cxgbe_media_status(struct ifnet *, struct ifmediareq *);
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
MALLOC_DEFINE(M_CXGBE, "cxgbe", "Chelsio T4/T5 Ethernet driver and services");
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
/*
* Correct lock order when you need to acquire multiple locks is t4_list_lock,
* then ADAPTER_LOCK, then t4_uld_list_lock.
*/
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static struct mtx t4_list_lock;
static SLIST_HEAD(, adapter) t4_list;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static struct mtx t4_uld_list_lock;
static SLIST_HEAD(, uld_info) t4_uld_list;
#endif
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/*
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
* Tunables. See tweak_tunables() too.
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
*
* Each tunable is set to a default value here if it's known at compile-time.
* Otherwise it is set to -1 as an indication to tweak_tunables() that it should
* provide a reasonable default when the driver is loaded.
*
* Tunables applicable to both T4 and T5 are under hw.cxgbe. Those specific to
* T5 are under hw.cxl.
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
*/
/*
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
* Number of queues for tx and rx, 10G and 1G, NIC and offload.
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
*/
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
#define NTXQ_10G 16
static int t4_ntxq10g = -1;
TUNABLE_INT("hw.cxgbe.ntxq10g", &t4_ntxq10g);
#define NRXQ_10G 8
static int t4_nrxq10g = -1;
TUNABLE_INT("hw.cxgbe.nrxq10g", &t4_nrxq10g);
#define NTXQ_1G 4
static int t4_ntxq1g = -1;
TUNABLE_INT("hw.cxgbe.ntxq1g", &t4_ntxq1g);
#define NRXQ_1G 2
static int t4_nrxq1g = -1;
TUNABLE_INT("hw.cxgbe.nrxq1g", &t4_nrxq1g);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
#define NOFLDTXQ_10G 8
static int t4_nofldtxq10g = -1;
TUNABLE_INT("hw.cxgbe.nofldtxq10g", &t4_nofldtxq10g);
#define NOFLDRXQ_10G 2
static int t4_nofldrxq10g = -1;
TUNABLE_INT("hw.cxgbe.nofldrxq10g", &t4_nofldrxq10g);
#define NOFLDTXQ_1G 2
static int t4_nofldtxq1g = -1;
TUNABLE_INT("hw.cxgbe.nofldtxq1g", &t4_nofldtxq1g);
#define NOFLDRXQ_1G 1
static int t4_nofldrxq1g = -1;
TUNABLE_INT("hw.cxgbe.nofldrxq1g", &t4_nofldrxq1g);
#endif
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/*
* Holdoff parameters for 10G and 1G ports.
*/
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
#define TMR_IDX_10G 1
static int t4_tmr_idx_10g = TMR_IDX_10G;
TUNABLE_INT("hw.cxgbe.holdoff_timer_idx_10G", &t4_tmr_idx_10g);
Change the default to not use packet counters to generate rx interrupts. Rely solely on the timer based mechanism. Update man page to reflect this change. MFC after: 1 week
2012-04-30 09:46:05 +00:00
#define PKTC_IDX_10G (-1)
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int t4_pktc_idx_10g = PKTC_IDX_10G;
TUNABLE_INT("hw.cxgbe.holdoff_pktc_idx_10G", &t4_pktc_idx_10g);
#define TMR_IDX_1G 1
static int t4_tmr_idx_1g = TMR_IDX_1G;
TUNABLE_INT("hw.cxgbe.holdoff_timer_idx_1G", &t4_tmr_idx_1g);
Change the default to not use packet counters to generate rx interrupts. Rely solely on the timer based mechanism. Update man page to reflect this change. MFC after: 1 week
2012-04-30 09:46:05 +00:00
#define PKTC_IDX_1G (-1)
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int t4_pktc_idx_1g = PKTC_IDX_1G;
TUNABLE_INT("hw.cxgbe.holdoff_pktc_idx_1G", &t4_pktc_idx_1g);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/*
* Size (# of entries) of each tx and rx queue.
*/
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static unsigned int t4_qsize_txq = TX_EQ_QSIZE;
TUNABLE_INT("hw.cxgbe.qsize_txq", &t4_qsize_txq);
static unsigned int t4_qsize_rxq = RX_IQ_QSIZE;
TUNABLE_INT("hw.cxgbe.qsize_rxq", &t4_qsize_rxq);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/*
* Interrupt types allowed (bits 0, 1, 2 = INTx, MSI, MSI-X respectively).
*/
static int t4_intr_types = INTR_MSIX | INTR_MSI | INTR_INTX;
TUNABLE_INT("hw.cxgbe.interrupt_types", &t4_intr_types);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/*
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
* Configuration file.
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
*/
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
#define DEFAULT_CF "default"
#define FLASH_CF "flash"
#define UWIRE_CF "uwire"
- Explain clearly why a different firmware is being installed (if/when it is being installed). Improve other error messages while here. - Select special FPGA specific configuration profile when appropriate. MFC after: 3 days
2013-04-11 19:39:40 +00:00
#define FPGA_CF "fpga"
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
static char t4_cfg_file[32] = DEFAULT_CF;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
TUNABLE_STR("hw.cxgbe.config_file", t4_cfg_file, sizeof(t4_cfg_file));
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Consider all the API versions of the interfaces exported by the firmware (instead of just the main firmware version) when evaluating firmware compatibility. Document the new "hw.cxgbe.fw_install" knob being introduced here. This should fix kern/173584 too. Setting hw.cxgbe.fw_install=2 will mostly do what was requested in the PR but it's a bit more intelligent in that it won't reinstall the same firmware repeatedly if the knob is left set. PR: kern/173584 MFC after: 5 days
2013-02-26 20:35:54 +00:00
/*
* Firmware auto-install by driver during attach (0, 1, 2 = prohibited, allowed,
* encouraged respectively).
*/
static unsigned int t4_fw_install = 1;
TUNABLE_INT("hw.cxgbe.fw_install", &t4_fw_install);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/*
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
* ASIC features that will be used. Disable the ones you don't want so that the
* chip resources aren't wasted on features that will not be used.
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
*/
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int t4_linkcaps_allowed = 0; /* No DCBX, PPP, etc. by default */
TUNABLE_INT("hw.cxgbe.linkcaps_allowed", &t4_linkcaps_allowed);
static int t4_niccaps_allowed = FW_CAPS_CONFIG_NIC;
TUNABLE_INT("hw.cxgbe.niccaps_allowed", &t4_niccaps_allowed);
Instruct the firmware not to provision resources for TCP offload if the kernel is being built without TCP_OFFLOAD. But never override toecaps_allowed if it has been set manually.
2012-07-02 20:42:43 +00:00
static int t4_toecaps_allowed = -1;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
TUNABLE_INT("hw.cxgbe.toecaps_allowed", &t4_toecaps_allowed);
static int t4_rdmacaps_allowed = 0;
TUNABLE_INT("hw.cxgbe.rdmacaps_allowed", &t4_rdmacaps_allowed);
static int t4_iscsicaps_allowed = 0;
TUNABLE_INT("hw.cxgbe.iscsicaps_allowed", &t4_iscsicaps_allowed);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int t4_fcoecaps_allowed = 0;
TUNABLE_INT("hw.cxgbe.fcoecaps_allowed", &t4_fcoecaps_allowed);
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
static int t5_write_combine = 0;
TUNABLE_INT("hw.cxl.write_combine", &t5_write_combine);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
struct intrs_and_queues {
Do not over-allocate MSI interrupts for the case where each ingress queue has its own interrupt. If the exact number that we need is not a power of 2 and we're using MSI, then switch to interrupt multiplexing. While here, replace the magic numbers with something more readable. MFC after: 3 days
2011-03-24 01:03:01 +00:00
int intr_type; /* INTx, MSI, or MSI-X */
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
int nirq; /* Number of vectors */
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
int intr_flags;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
int ntxq10g; /* # of NIC txq's for each 10G port */
int nrxq10g; /* # of NIC rxq's for each 10G port */
int ntxq1g; /* # of NIC txq's for each 1G port */
int nrxq1g; /* # of NIC rxq's for each 1G port */
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
int nofldtxq10g; /* # of TOE txq's for each 10G port */
int nofldrxq10g; /* # of TOE rxq's for each 10G port */
int nofldtxq1g; /* # of TOE txq's for each 1G port */
int nofldrxq1g; /* # of TOE rxq's for each 1G port */
#endif
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
};
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
struct filter_entry {
uint32_t valid:1; /* filter allocated and valid */
uint32_t locked:1; /* filter is administratively locked */
uint32_t pending:1; /* filter action is pending firmware reply */
uint32_t smtidx:8; /* Source MAC Table index for smac */
L2 table code. This is enough to get the T4's switch + L2 rewrite filters working. (All other filters - switch without L2 info rewrite, steer, and drop - were already fully-functional). Some contrived examples of "switch" filters with L2 rewriting: # cxgbetool t4nex0 iport 0 dport 80 action switch vlan +9 eport 3 Intercept all packets received on physical port 0 with TCP port 80 as destination, insert a vlan tag with VID 9, and send them out of port 3. # cxgbetool t4nex0 sip 192.168.1.1/32 ivlan 5 action switch \ vlan =9 smac aa:bb:cc:dd:ee:ff eport 0 Intercept all packets (received on any port) with source IP address 192.168.1.1 and VLAN id 5, rewrite the VLAN id to 9, rewrite source mac to aa:bb:cc:dd:ee:ff, and send it out of port 0. MFC after: 1 week
2011-05-30 21:07:26 +00:00
struct l2t_entry *l2t; /* Layer Two Table entry for dmac */
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
struct t4_filter_specification fs;
};
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
enum {
XGMAC_MTU = (1 << 0),
XGMAC_PROMISC = (1 << 1),
XGMAC_ALLMULTI = (1 << 2),
XGMAC_VLANEX = (1 << 3),
XGMAC_UCADDR = (1 << 4),
XGMAC_MCADDRS = (1 << 5),
XGMAC_ALL = 0xffff
};
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
static int map_bars_0_and_4(struct adapter *);
static int map_bar_2(struct adapter *);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static void setup_memwin(struct adapter *);
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
static int validate_mem_range(struct adapter *, uint32_t, int);
static int validate_mt_off_len(struct adapter *, int, uint32_t, int,
uint32_t *);
static void memwin_info(struct adapter *, int, uint32_t *, uint32_t *);
static uint32_t position_memwin(struct adapter *, int, uint32_t);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static int cfg_itype_and_nqueues(struct adapter *, int, int,
struct intrs_and_queues *);
static int prep_firmware(struct adapter *);
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
static int partition_resources(struct adapter *, const struct firmware *,
const char *);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int get_params__pre_init(struct adapter *);
static int get_params__post_init(struct adapter *);
cxgbe(4): Ask the card's firmware to pad up tiny CPLs by encapsulating them in a firmware message if it is able to do so. This works out better for one of the FIFOs in the chip. MFC after: 5 days
2013-02-26 00:27:27 +00:00
static int set_params__post_init(struct adapter *);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static void t4_set_desc(struct adapter *);
static void build_medialist(struct port_info *);
static int update_mac_settings(struct port_info *, int);
static int cxgbe_init_synchronized(struct port_info *);
static int cxgbe_uninit_synchronized(struct port_info *);
Install interrupt handlers early, during attach, for the reason explained in r239913 by jhb. MFC after: 1 week
2012-09-13 09:18:13 +00:00
static int setup_intr_handlers(struct adapter *);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int adapter_full_init(struct adapter *);
static int adapter_full_uninit(struct adapter *);
static int port_full_init(struct port_info *);
static int port_full_uninit(struct port_info *);
static void quiesce_eq(struct adapter *, struct sge_eq *);
static void quiesce_iq(struct adapter *, struct sge_iq *);
static void quiesce_fl(struct adapter *, struct sge_fl *);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static int t4_alloc_irq(struct adapter *, struct irq *, int rid,
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
driver_intr_t *, void *, char *);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static int t4_free_irq(struct adapter *, struct irq *);
static void reg_block_dump(struct adapter *, uint8_t *, unsigned int,
unsigned int);
static void t4_get_regs(struct adapter *, struct t4_regdump *, uint8_t *);
static void cxgbe_tick(void *);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
static void cxgbe_vlan_config(void *, struct ifnet *, uint16_t);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int cpl_not_handled(struct sge_iq *, const struct rss_header *,
struct mbuf *);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
static int an_not_handled(struct sge_iq *, const struct rsp_ctrl *);
Allow for a different handler for each type of firmware message. MFC after: 2 weeks
2012-08-16 18:31:50 +00:00
static int fw_msg_not_handled(struct adapter *, const __be64 *);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static int t4_sysctls(struct adapter *);
static int cxgbe_sysctls(struct port_info *);
Display holdoff timers and packet counts as a list of numbers. MFC after: 1 week
2011-03-09 21:07:09 +00:00
static int sysctl_int_array(SYSCTL_HANDLER_ARGS);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int sysctl_bitfield(SYSCTL_HANDLER_ARGS);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static int sysctl_holdoff_tmr_idx(SYSCTL_HANDLER_ARGS);
static int sysctl_holdoff_pktc_idx(SYSCTL_HANDLER_ARGS);
static int sysctl_qsize_rxq(SYSCTL_HANDLER_ARGS);
static int sysctl_qsize_txq(SYSCTL_HANDLER_ARGS);
static int sysctl_handle_t4_reg64(SYSCTL_HANDLER_ARGS);
cxgbe: reduce diffs with other branches. Will help future MFCs from HEAD. MFC after: 3 days
2012-02-07 06:21:59 +00:00
#ifdef SBUF_DRAIN
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int sysctl_cctrl(SYSCTL_HANDLER_ARGS);
cxgbe(4): Add sysctls to extract debug information from the chip: dev.t4nex.X.misc.cim_la logic analyzer dump dev.t4nex.X.misc.cim_qcfg queue configuration dev.t4nex.X.misc.cim_ibq_xxx inbound queues dev.t4nex.X.misc.cim_obq_xxx outbound queues Obtained from: Chelsio MFC after: 1 week
2013-02-21 20:13:15 +00:00
static int sysctl_cim_ibq_obq(SYSCTL_HANDLER_ARGS);
static int sysctl_cim_la(SYSCTL_HANDLER_ARGS);
static int sysctl_cim_qcfg(SYSCTL_HANDLER_ARGS);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int sysctl_cpl_stats(SYSCTL_HANDLER_ARGS);
static int sysctl_ddp_stats(SYSCTL_HANDLER_ARGS);
Firmware device log. # sysctl dev.t4nex.0.devlog MFC after: mdf's sysctl+sbuf changes are MFC'd
2011-05-31 23:49:13 +00:00
static int sysctl_devlog(SYSCTL_HANDLER_ARGS);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int sysctl_fcoe_stats(SYSCTL_HANDLER_ARGS);
static int sysctl_hw_sched(SYSCTL_HANDLER_ARGS);
static int sysctl_lb_stats(SYSCTL_HANDLER_ARGS);
static int sysctl_meminfo(SYSCTL_HANDLER_ARGS);
static int sysctl_path_mtus(SYSCTL_HANDLER_ARGS);
static int sysctl_pm_stats(SYSCTL_HANDLER_ARGS);
static int sysctl_rdma_stats(SYSCTL_HANDLER_ARGS);
static int sysctl_tcp_stats(SYSCTL_HANDLER_ARGS);
static int sysctl_tids(SYSCTL_HANDLER_ARGS);
static int sysctl_tp_err_stats(SYSCTL_HANDLER_ARGS);
static int sysctl_tx_rate(SYSCTL_HANDLER_ARGS);
Cosmetic change (s/wrwc/wcwr/;s/WRWC/WCWR/). MFC after: 3 days.
2013-04-11 22:49:29 +00:00
static int sysctl_wcwr_stats(SYSCTL_HANDLER_ARGS);
cxgbe: reduce diffs with other branches. Will help future MFCs from HEAD. MFC after: 3 days
2012-02-07 06:21:59 +00:00
#endif
Resume tx immediately in response to an SGE egress update from the hardware. MFC after: 1 week
2011-03-05 03:06:38 +00:00
static inline void txq_start(struct ifnet *, struct sge_txq *);
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
static uint32_t fconf_to_mode(uint32_t);
static uint32_t mode_to_fconf(uint32_t);
static uint32_t fspec_to_fconf(struct t4_filter_specification *);
static int get_filter_mode(struct adapter *, uint32_t *);
static int set_filter_mode(struct adapter *, uint32_t);
Provide hit-count with rest of the information about a filter. MFC after: 1 week
2011-06-01 01:32:58 +00:00
static inline uint64_t get_filter_hits(struct adapter *, uint32_t);
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
static int get_filter(struct adapter *, struct t4_filter *);
static int set_filter(struct adapter *, struct t4_filter *);
static int del_filter(struct adapter *, struct t4_filter *);
L2 table code. This is enough to get the T4's switch + L2 rewrite filters working. (All other filters - switch without L2 info rewrite, steer, and drop - were already fully-functional). Some contrived examples of "switch" filters with L2 rewriting: # cxgbetool t4nex0 iport 0 dport 80 action switch vlan +9 eport 3 Intercept all packets received on physical port 0 with TCP port 80 as destination, insert a vlan tag with VID 9, and send them out of port 3. # cxgbetool t4nex0 sip 192.168.1.1/32 ivlan 5 action switch \ vlan =9 smac aa:bb:cc:dd:ee:ff eport 0 Intercept all packets (received on any port) with source IP address 192.168.1.1 and VLAN id 5, rewrite the VLAN id to 9, rewrite source mac to aa:bb:cc:dd:ee:ff, and send it out of port 0. MFC after: 1 week
2011-05-30 21:07:26 +00:00
static void clear_filter(struct filter_entry *);
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
static int set_filter_wr(struct adapter *, int);
static int del_filter_wr(struct adapter *, int);
- driver ioctl to get SGE context for any given queue. - sysctls to display the context id, cidx, and pidx of all kinds of queues. MFC after: 3 days
2011-06-11 04:50:54 +00:00
static int get_sge_context(struct adapter *, struct t4_sge_context *);
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
static int load_fw(struct adapter *, struct t4_data *);
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
static int read_card_mem(struct adapter *, int, struct t4_mem_range *);
Add a driver ioctl to read a byte from any device on a port's i2c bus. This lets userspace read arbitrary information from the SFP+ modules etc. on this bus. Reading multiple bytes in the same transaction isn't possible right now. I'll update the driver once the chip's firmware supports this. MFC after: 3 days
2012-10-10 17:13:46 +00:00
static int read_i2c(struct adapter *, struct t4_i2c_data *);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int toe_capability(struct port_info *, int);
#endif
cxgbe(4): Ensure that the MOD_LOAD handler runs before either t4nex or t5nex attach to their devices. MFC after: 3 days
2013-04-11 17:50:50 +00:00
static int mod_event(module_t, int, void *);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
struct {
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
uint16_t device;
char *desc;
} t4_pciids[] = {
Allow cxgbe(4) running within a VM to attach to its devices that have been exported via PCI passthrough. - Do not check for a specific physical function (PF) before claiming a device. Different PFs have different device-ids so this check is redundant anyway. - Obtain the PF# from the WHOAMI register instead of pci_get_function(). - Setup the memory windows using the real BAR0 address, not what the VM says it is. Obtained from: Chelsio Communications
2012-06-26 00:34:34 +00:00
{0xa000, "Chelsio Terminator 4 FPGA"},
{0x4400, "Chelsio T440-dbg"},
{0x4401, "Chelsio T420-CR"},
{0x4402, "Chelsio T422-CR"},
{0x4403, "Chelsio T440-CR"},
{0x4404, "Chelsio T420-BCH"},
{0x4405, "Chelsio T440-BCH"},
{0x4406, "Chelsio T440-CH"},
{0x4407, "Chelsio T420-SO"},
{0x4408, "Chelsio T420-CX"},
{0x4409, "Chelsio T420-BT"},
{0x440a, "Chelsio T404-BT"},
cxgbe(4): Add support for the T440-LP-CR card. This is the 4x10G low profile card with a QSFP+ transceiver. MFC after: 3 days
2012-12-22 07:47:07 +00:00
{0x440e, "Chelsio T440-LP-CR"},
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
}, t5_pciids[] = {
{0xb000, "Chelsio Terminator 5 FPGA"},
{0x5400, "Chelsio T580-dbg"},
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
};
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
/*
* service_iq() has an iq and needs the fl. Offset of fl from the iq should be
* exactly the same for both rxq and ofld_rxq.
*/
CTASSERT(offsetof(struct sge_ofld_rxq, iq) == offsetof(struct sge_rxq, iq));
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
CTASSERT(offsetof(struct sge_ofld_rxq, fl) == offsetof(struct sge_rxq, fl));
#endif
Allow for a different handler for each type of firmware message. MFC after: 2 weeks
2012-08-16 18:31:50 +00:00
/* No easy way to include t4_msg.h before adapter.h so we check this way */
Use native FreeBSD facilities everywhere except the shared code in common/ MFC after: 1 week
2012-09-13 09:10:10 +00:00
CTASSERT(nitems(((struct adapter *)0)->cpl_handler) == NUM_CPL_CMDS);
CTASSERT(nitems(((struct adapter *)0)->fw_msg_handler) == NUM_FW6_TYPES);
Allow for a different handler for each type of firmware message. MFC after: 2 weeks
2012-08-16 18:31:50 +00:00
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static int
t4_probe(device_t dev)
{
int i;
uint16_t v = pci_get_vendor(dev);
uint16_t d = pci_get_device(dev);
Allow cxgbe(4) running within a VM to attach to its devices that have been exported via PCI passthrough. - Do not check for a specific physical function (PF) before claiming a device. Different PFs have different device-ids so this check is redundant anyway. - Obtain the PF# from the WHOAMI register instead of pci_get_function(). - Setup the memory windows using the real BAR0 address, not what the VM says it is. Obtained from: Chelsio Communications
2012-06-26 00:34:34 +00:00
uint8_t f = pci_get_function(dev);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (v != PCI_VENDOR_ID_CHELSIO)
return (ENXIO);
Allow cxgbe(4) running within a VM to attach to its devices that have been exported via PCI passthrough. - Do not check for a specific physical function (PF) before claiming a device. Different PFs have different device-ids so this check is redundant anyway. - Obtain the PF# from the WHOAMI register instead of pci_get_function(). - Setup the memory windows using the real BAR0 address, not what the VM says it is. Obtained from: Chelsio Communications
2012-06-26 00:34:34 +00:00
/* Attach only to PF0 of the FPGA */
if (d == 0xa000 && f != 0)
return (ENXIO);
Use native FreeBSD facilities everywhere except the shared code in common/ MFC after: 1 week
2012-09-13 09:10:10 +00:00
for (i = 0; i < nitems(t4_pciids); i++) {
Allow cxgbe(4) running within a VM to attach to its devices that have been exported via PCI passthrough. - Do not check for a specific physical function (PF) before claiming a device. Different PFs have different device-ids so this check is redundant anyway. - Obtain the PF# from the WHOAMI register instead of pci_get_function(). - Setup the memory windows using the real BAR0 address, not what the VM says it is. Obtained from: Chelsio Communications
2012-06-26 00:34:34 +00:00
if (d == t4_pciids[i].device) {
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
device_set_desc(dev, t4_pciids[i].desc);
return (BUS_PROBE_DEFAULT);
}
}
return (ENXIO);
}
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
static int
t5_probe(device_t dev)
{
int i;
uint16_t v = pci_get_vendor(dev);
uint16_t d = pci_get_device(dev);
uint8_t f = pci_get_function(dev);
if (v != PCI_VENDOR_ID_CHELSIO)
return (ENXIO);
/* Attach only to PF0 of the FPGA */
if (d == 0xb000 && f != 0)
return (ENXIO);
for (i = 0; i < nitems(t5_pciids); i++) {
if (d == t5_pciids[i].device) {
device_set_desc(dev, t5_pciids[i].desc);
return (BUS_PROBE_DEFAULT);
}
}
return (ENXIO);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static int
t4_attach(device_t dev)
{
struct adapter *sc;
int rc = 0, i, n10g, n1g, rqidx, tqidx;
struct intrs_and_queues iaq;
struct sge *s;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
int ofld_rqidx, ofld_tqidx;
#endif
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
sc = device_get_softc(dev);
sc->dev = dev;
pci_enable_busmaster(dev);
- Enable per-channel congestion notification. - Enable PCIe relaxed ordering for all egress queues and rx data buffers. MFC after: 3 days
2011-05-18 22:09:04 +00:00
if (pci_find_cap(dev, PCIY_EXPRESS, &i) == 0) {
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
uint32_t v;
- Enable per-channel congestion notification. - Enable PCIe relaxed ordering for all egress queues and rx data buffers. MFC after: 3 days
2011-05-18 22:09:04 +00:00
pci_set_max_read_req(dev, 4096);
Align the PCI Express #defines with the style used for the PCI-X #defines. This also has the advantage that it makes the names more compact, iand also allows us to correct the non-uniform naming of the PCIM_LINK_* defines, making them all consistent amongst themselves. This is a mostly mechanical rename: s/PCIR_EXPRESS_/PCIER_/g s/PCIM_EXP_/PCIEM_/g s/PCIM_LINK_/PCIEM_LINK_/g When this is MFC'd, #defines will be added for the old names to assist out-of-tree drivers. Discussed with: jhb MFC after: 1 week
2012-09-18 22:04:59 +00:00
v = pci_read_config(dev, i + PCIER_DEVICE_CTL, 2);
v |= PCIEM_CTL_RELAXED_ORD_ENABLE;
pci_write_config(dev, i + PCIER_DEVICE_CTL, v, 2);
- Enable per-channel congestion notification. - Enable PCIe relaxed ordering for all egress queues and rx data buffers. MFC after: 3 days
2011-05-18 22:09:04 +00:00
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
snprintf(sc->lockname, sizeof(sc->lockname), "%s",
device_get_nameunit(dev));
mtx_init(&sc->sc_lock, sc->lockname, 0, MTX_DEF);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
mtx_lock(&t4_list_lock);
SLIST_INSERT_HEAD(&t4_list, sc, link);
mtx_unlock(&t4_list_lock);
mtx_init(&sc->sfl_lock, "starving freelists", 0, MTX_DEF);
TAILQ_INIT(&sc->sfl);
callout_init(&sc->sfl_callout, CALLOUT_MPSAFE);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
rc = map_bars_0_and_4(sc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (rc != 0)
goto done; /* error message displayed already */
Allow cxgbe(4) running within a VM to attach to its devices that have been exported via PCI passthrough. - Do not check for a specific physical function (PF) before claiming a device. Different PFs have different device-ids so this check is redundant anyway. - Obtain the PF# from the WHOAMI register instead of pci_get_function(). - Setup the memory windows using the real BAR0 address, not what the VM says it is. Obtained from: Chelsio Communications
2012-06-26 00:34:34 +00:00
/*
* This is the real PF# to which we're attaching. Works from within PCI
* passthrough environments too, where pci_get_function() could return a
* different PF# depending on the passthrough configuration. We need to
* use the real PF# in all our communication with the firmware.
*/
sc->pf = G_SOURCEPF(t4_read_reg(sc, A_PL_WHOAMI));
sc->mbox = sc->pf;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
memset(sc->chan_map, 0xff, sizeof(sc->chan_map));
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
sc->an_handler = an_not_handled;
Use native FreeBSD facilities everywhere except the shared code in common/ MFC after: 1 week
2012-09-13 09:10:10 +00:00
for (i = 0; i < nitems(sc->cpl_handler); i++)
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
sc->cpl_handler[i] = cpl_not_handled;
Use native FreeBSD facilities everywhere except the shared code in common/ MFC after: 1 week
2012-09-13 09:10:10 +00:00
for (i = 0; i < nitems(sc->fw_msg_handler); i++)
Allow for a different handler for each type of firmware message. MFC after: 2 weeks
2012-08-16 18:31:50 +00:00
sc->fw_msg_handler[i] = fw_msg_not_handled;
Add a routine (t4_set_tcb_field) to update arbitrary parts of a hardware TCB. Filters are programmed by modifying the TCB too (via a different routine) and the reply to any TCB update is delivered via a CPL_SET_TCB_RPL. Figure out whether the reply is for a filter-write or something else and route it appropriately. MFC after: 2 weeks
2012-08-16 20:15:29 +00:00
t4_register_cpl_handler(sc, CPL_SET_TCB_RPL, t4_filter_rpl);
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
t4_init_sge_cpl_handlers(sc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/* Prepare the adapter for operation */
rc = -t4_prep_adapter(sc);
if (rc != 0) {
device_printf(dev, "failed to prepare adapter: %d.\n", rc);
goto done;
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/*
* Do this really early, with the memory windows set up even before the
* character device. The userland tool's register i/o and mem read
* will work even in "recovery mode".
*/
setup_memwin(sc);
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
sc->cdev = make_dev(is_t4(sc) ? &t4_cdevsw : &t5_cdevsw,
device_get_unit(dev), UID_ROOT, GID_WHEEL, 0600, "%s",
device_get_nameunit(dev));
if (sc->cdev == NULL)
device_printf(dev, "failed to create nexus char device.\n");
else
sc->cdev->si_drv1 = sc;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/* Go no further if recovery mode has been requested. */
if (TUNABLE_INT_FETCH("hw.cxgbe.sos", &i) && i != 0) {
device_printf(dev, "recovery mode.\n");
goto done;
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/* Prepare the firmware for operation */
rc = prep_firmware(sc);
if (rc != 0)
goto done; /* error message displayed already */
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
rc = get_params__post_init(sc);
if (rc != 0)
goto done; /* error message displayed already */
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Ask the card's firmware to pad up tiny CPLs by encapsulating them in a firmware message if it is able to do so. This works out better for one of the FIFOs in the chip. MFC after: 5 days
2013-02-26 00:27:27 +00:00
rc = set_params__post_init(sc);
if (rc != 0)
goto done; /* error message displayed already */
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
rc = map_bar_2(sc);
if (rc != 0)
goto done; /* error message displayed already */
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
for (i = 0; i < NCHAN; i++)
sc->params.tp.tx_modq[i] = i;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
rc = t4_create_dma_tag(sc);
if (rc != 0)
goto done; /* error message displayed already */
/*
* First pass over all the ports - allocate VIs and initialize some
* basic parameters like mac address, port type, etc. We also figure
* out whether a port is 10G or 1G and use that information when
* calculating how many interrupts to attempt to allocate.
*/
n10g = n1g = 0;
for_each_port(sc, i) {
struct port_info *pi;
pi = malloc(sizeof(*pi), M_CXGBE, M_ZERO | M_WAITOK);
sc->port[i] = pi;
/* These must be set before t4_port_init */
pi->adapter = sc;
pi->port_id = i;
/* Allocate the vi and initialize parameters like mac addr */
rc = -t4_port_init(pi, sc->mbox, sc->pf, 0);
if (rc != 0) {
device_printf(dev, "unable to initialize port %d: %d\n",
i, rc);
free(pi, M_CXGBE);
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
sc->port[i] = NULL;
goto done;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
snprintf(pi->lockname, sizeof(pi->lockname), "%sp%d",
device_get_nameunit(dev), i);
mtx_init(&pi->pi_lock, pi->lockname, 0, MTX_DEF);
if (is_10G_port(pi)) {
n10g++;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
pi->tmr_idx = t4_tmr_idx_10g;
pi->pktc_idx = t4_pktc_idx_10g;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
} else {
n1g++;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
pi->tmr_idx = t4_tmr_idx_1g;
pi->pktc_idx = t4_pktc_idx_1g;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
pi->xact_addr_filt = -1;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
pi->qsize_rxq = t4_qsize_rxq;
pi->qsize_txq = t4_qsize_txq;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
pi->dev = device_add_child(dev, is_t4(sc) ? "cxgbe" : "cxl", -1);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (pi->dev == NULL) {
device_printf(dev,
"failed to add device for port %d.\n", i);
rc = ENXIO;
goto done;
}
device_set_softc(pi->dev, pi);
}
/*
* Interrupt type, # of interrupts, # of rx/tx queues, etc.
*/
rc = cfg_itype_and_nqueues(sc, n10g, n1g, &iaq);
if (rc != 0)
goto done; /* error message displayed already */
sc->intr_type = iaq.intr_type;
sc->intr_count = iaq.nirq;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
sc->flags |= iaq.intr_flags;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
s = &sc->sge;
s->nrxq = n10g * iaq.nrxq10g + n1g * iaq.nrxq1g;
s->ntxq = n10g * iaq.ntxq10g + n1g * iaq.ntxq1g;
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
s->neq = s->ntxq + s->nrxq; /* the free list in an rxq is an eq */
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
s->neq += sc->params.nports + 1;/* ctrl queues: 1 per port + 1 mgmt */
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
s->niq = s->nrxq + 1; /* 1 extra for firmware event queue */
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (is_offload(sc)) {
s->nofldrxq = n10g * iaq.nofldrxq10g + n1g * iaq.nofldrxq1g;
s->nofldtxq = n10g * iaq.nofldtxq10g + n1g * iaq.nofldtxq1g;
s->neq += s->nofldtxq + s->nofldrxq;
s->niq += s->nofldrxq;
s->ofld_rxq = malloc(s->nofldrxq * sizeof(struct sge_ofld_rxq),
M_CXGBE, M_ZERO | M_WAITOK);
s->ofld_txq = malloc(s->nofldtxq * sizeof(struct sge_wrq),
M_CXGBE, M_ZERO | M_WAITOK);
}
#endif
s->ctrlq = malloc(sc->params.nports * sizeof(struct sge_wrq), M_CXGBE,
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
M_ZERO | M_WAITOK);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
s->rxq = malloc(s->nrxq * sizeof(struct sge_rxq), M_CXGBE,
M_ZERO | M_WAITOK);
s->txq = malloc(s->ntxq * sizeof(struct sge_txq), M_CXGBE,
M_ZERO | M_WAITOK);
s->iqmap = malloc(s->niq * sizeof(struct sge_iq *), M_CXGBE,
M_ZERO | M_WAITOK);
s->eqmap = malloc(s->neq * sizeof(struct sge_eq *), M_CXGBE,
M_ZERO | M_WAITOK);
sc->irq = malloc(sc->intr_count * sizeof(struct irq), M_CXGBE,
M_ZERO | M_WAITOK);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
t4_init_l2t(sc, M_WAITOK);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/*
* Second pass over the ports. This time we know the number of rx and
* tx queues that each port should get.
*/
rqidx = tqidx = 0;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
ofld_rqidx = ofld_tqidx = 0;
#endif
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
for_each_port(sc, i) {
struct port_info *pi = sc->port[i];
if (pi == NULL)
continue;
pi->first_rxq = rqidx;
pi->first_txq = tqidx;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (is_10G_port(pi)) {
pi->nrxq = iaq.nrxq10g;
pi->ntxq = iaq.ntxq10g;
} else {
pi->nrxq = iaq.nrxq1g;
pi->ntxq = iaq.ntxq1g;
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
rqidx += pi->nrxq;
tqidx += pi->ntxq;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (is_offload(sc)) {
pi->first_ofld_rxq = ofld_rqidx;
pi->first_ofld_txq = ofld_tqidx;
if (is_10G_port(pi)) {
pi->nofldrxq = iaq.nofldrxq10g;
pi->nofldtxq = iaq.nofldtxq10g;
} else {
pi->nofldrxq = iaq.nofldrxq1g;
pi->nofldtxq = iaq.nofldtxq1g;
}
ofld_rqidx += pi->nofldrxq;
ofld_tqidx += pi->nofldtxq;
}
#endif
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
Install interrupt handlers early, during attach, for the reason explained in r239913 by jhb. MFC after: 1 week
2012-09-13 09:18:13 +00:00
rc = setup_intr_handlers(sc);
if (rc != 0) {
device_printf(dev,
"failed to setup interrupt handlers: %d\n", rc);
goto done;
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
rc = bus_generic_attach(dev);
if (rc != 0) {
device_printf(dev,
"failed to attach all child ports: %d\n", rc);
goto done;
}
device_printf(dev,
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
"PCIe x%d, %d ports, %d %s interrupt%s, %d eq, %d iq\n",
sc->params.pci.width, sc->params.nports, sc->intr_count,
sc->intr_type == INTR_MSIX ? "MSI-X" :
(sc->intr_type == INTR_MSI ? "MSI" : "INTx"),
sc->intr_count > 1 ? "s" : "", sc->sge.neq, sc->sge.niq);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
t4_set_desc(sc);
done:
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (rc != 0 && sc->cdev) {
/* cdev was created and so cxgbetool works; recover that way. */
device_printf(dev,
"error during attach, adapter is now in recovery mode.\n");
rc = 0;
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (rc != 0)
t4_detach(dev);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
else
t4_sysctls(sc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
return (rc);
}
/*
* Idempotent
*/
static int
t4_detach(device_t dev)
{
struct adapter *sc;
struct port_info *pi;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
int i, rc;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
sc = device_get_softc(dev);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (sc->flags & FULL_INIT_DONE)
t4_intr_disable(sc);
if (sc->cdev) {
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
destroy_dev(sc->cdev);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
sc->cdev = NULL;
}
rc = bus_generic_detach(dev);
if (rc) {
device_printf(dev,
"failed to detach child devices: %d\n", rc);
return (rc);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Install interrupt handlers early, during attach, for the reason explained in r239913 by jhb. MFC after: 1 week
2012-09-13 09:18:13 +00:00
for (i = 0; i < sc->intr_count; i++)
t4_free_irq(sc, &sc->irq[i]);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
for (i = 0; i < MAX_NPORTS; i++) {
pi = sc->port[i];
if (pi) {
t4_free_vi(pi->adapter, sc->mbox, sc->pf, 0, pi->viid);
if (pi->dev)
device_delete_child(dev, pi->dev);
mtx_destroy(&pi->pi_lock);
free(pi, M_CXGBE);
}
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (sc->flags & FULL_INIT_DONE)
adapter_full_uninit(sc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (sc->flags & FW_OK)
t4_fw_bye(sc, sc->mbox);
Do not over-allocate MSI interrupts for the case where each ingress queue has its own interrupt. If the exact number that we need is not a power of 2 and we're using MSI, then switch to interrupt multiplexing. While here, replace the magic numbers with something more readable. MFC after: 3 days
2011-03-24 01:03:01 +00:00
if (sc->intr_type == INTR_MSI || sc->intr_type == INTR_MSIX)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
pci_release_msi(dev);
if (sc->regs_res)
bus_release_resource(dev, SYS_RES_MEMORY, sc->regs_rid,
sc->regs_res);
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
if (sc->udbs_res)
bus_release_resource(dev, SYS_RES_MEMORY, sc->udbs_rid,
sc->udbs_res);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (sc->msix_res)
bus_release_resource(dev, SYS_RES_MEMORY, sc->msix_rid,
sc->msix_res);
L2 table code. This is enough to get the T4's switch + L2 rewrite filters working. (All other filters - switch without L2 info rewrite, steer, and drop - were already fully-functional). Some contrived examples of "switch" filters with L2 rewriting: # cxgbetool t4nex0 iport 0 dport 80 action switch vlan +9 eport 3 Intercept all packets received on physical port 0 with TCP port 80 as destination, insert a vlan tag with VID 9, and send them out of port 3. # cxgbetool t4nex0 sip 192.168.1.1/32 ivlan 5 action switch \ vlan =9 smac aa:bb:cc:dd:ee:ff eport 0 Intercept all packets (received on any port) with source IP address 192.168.1.1 and VLAN id 5, rewrite the VLAN id to 9, rewrite source mac to aa:bb:cc:dd:ee:ff, and send it out of port 0. MFC after: 1 week
2011-05-30 21:07:26 +00:00
if (sc->l2t)
t4_free_l2t(sc->l2t);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
free(sc->sge.ofld_rxq, M_CXGBE);
free(sc->sge.ofld_txq, M_CXGBE);
#endif
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
free(sc->irq, M_CXGBE);
free(sc->sge.rxq, M_CXGBE);
free(sc->sge.txq, M_CXGBE);
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
free(sc->sge.ctrlq, M_CXGBE);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
free(sc->sge.iqmap, M_CXGBE);
free(sc->sge.eqmap, M_CXGBE);
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
free(sc->tids.ftid_tab, M_CXGBE);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
t4_destroy_dma_tag(sc);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (mtx_initialized(&sc->sc_lock)) {
mtx_lock(&t4_list_lock);
SLIST_REMOVE(&t4_list, sc, adapter, link);
mtx_unlock(&t4_list_lock);
mtx_destroy(&sc->sc_lock);
}
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
if (mtx_initialized(&sc->tids.ftid_lock))
mtx_destroy(&sc->tids.ftid_lock);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (mtx_initialized(&sc->sfl_lock))
mtx_destroy(&sc->sfl_lock);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
bzero(sc, sizeof(*sc));
return (0);
}
static int
cxgbe_probe(device_t dev)
{
char buf[128];
struct port_info *pi = device_get_softc(dev);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
snprintf(buf, sizeof(buf), "port %d", pi->port_id);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
device_set_desc_copy(dev, buf);
return (BUS_PROBE_DEFAULT);
}
#define T4_CAP (IFCAP_VLAN_HWTAGGING | IFCAP_VLAN_MTU | IFCAP_HWCSUM | \
IFCAP_VLAN_HWCSUM | IFCAP_TSO | IFCAP_JUMBO_MTU | IFCAP_LRO | \
- Assign (don't OR) the CSUM_XXX bits to csum_flags in the rx checksum code. - Fix TSO/TSO4 mixup. - Add IFCAP_LINKSTATE to the available/enabled capabilities.
2012-06-30 02:05:09 +00:00
IFCAP_VLAN_HWTSO | IFCAP_LINKSTATE | IFCAP_HWCSUM_IPV6)
cxgbe(4): support for IPv6 TSO and LRO. Submitted by: bz (this is a modified version of that patch)
2012-06-29 19:51:06 +00:00
#define T4_CAP_ENABLE (T4_CAP)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static int
cxgbe_attach(device_t dev)
{
struct port_info *pi = device_get_softc(dev);
struct ifnet *ifp;
/* Allocate an ifnet and set it up */
ifp = if_alloc(IFT_ETHER);
if (ifp == NULL) {
device_printf(dev, "Cannot allocate ifnet\n");
return (ENOMEM);
}
pi->ifp = ifp;
ifp->if_softc = pi;
callout_init(&pi->tick, CALLOUT_MPSAFE);
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_init = cxgbe_init;
ifp->if_ioctl = cxgbe_ioctl;
ifp->if_transmit = cxgbe_transmit;
ifp->if_qflush = cxgbe_qflush;
ifp->if_capabilities = T4_CAP;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (is_offload(pi->adapter))
cxgbe/tom: List IFCAP_TOE6 as supported now that all the required pieces are in place. You still have to enable it explicitly, after loading the t4_tom KLD.
2013-01-26 01:06:27 +00:00
ifp->if_capabilities |= IFCAP_TOE;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
#endif
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
ifp->if_capenable = T4_CAP_ENABLE;
cxgbe(4): support for IPv6 hardware checksumming (rx and tx).
2012-06-29 16:50:52 +00:00
ifp->if_hwassist = CSUM_TCP | CSUM_UDP | CSUM_IP | CSUM_TSO |
CSUM_UDP_IPV6 | CSUM_TCP_IPV6;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/* Initialize ifmedia for this port */
ifmedia_init(&pi->media, IFM_IMASK, cxgbe_media_change,
cxgbe_media_status);
build_medialist(pi);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
pi->vlan_c = EVENTHANDLER_REGISTER(vlan_config, cxgbe_vlan_config, ifp,
EVENTHANDLER_PRI_ANY);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
ether_ifattach(ifp, pi->hw_addr);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (is_offload(pi->adapter)) {
device_printf(dev,
"%d txq, %d rxq (NIC); %d txq, %d rxq (TOE)\n",
pi->ntxq, pi->nrxq, pi->nofldtxq, pi->nofldrxq);
} else
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
#endif
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
device_printf(dev, "%d txq, %d rxq\n", pi->ntxq, pi->nrxq);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe_sysctls(pi);
return (0);
}
static int
cxgbe_detach(device_t dev)
{
struct port_info *pi = device_get_softc(dev);
struct adapter *sc = pi->adapter;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct ifnet *ifp = pi->ifp;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/* Tell if_ioctl and if_init that the port is going away */
ADAPTER_LOCK(sc);
SET_DOOMED(pi);
wakeup(&sc->flags);
while (IS_BUSY(sc))
mtx_sleep(&sc->flags, &sc->sc_lock, 0, "t4detach", 0);
SET_BUSY(sc);
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
#ifdef INVARIANTS
sc->last_op = "t4detach";
sc->last_op_thr = curthread;
#endif
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
ADAPTER_UNLOCK(sc);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
if (pi->vlan_c)
EVENTHANDLER_DEREGISTER(vlan_config, pi->vlan_c);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
PORT_LOCK(pi);
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
callout_stop(&pi->tick);
PORT_UNLOCK(pi);
callout_drain(&pi->tick);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/* Let detach proceed even if these fail. */
cxgbe_uninit_synchronized(pi);
port_full_uninit(pi);
Resume tx immediately in response to an SGE egress update from the hardware. MFC after: 1 week
2011-03-05 03:06:38 +00:00
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
ifmedia_removeall(&pi->media);
ether_ifdetach(pi->ifp);
if_free(pi->ifp);
ADAPTER_LOCK(sc);
CLR_BUSY(sc);
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
wakeup(&sc->flags);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
ADAPTER_UNLOCK(sc);
return (0);
}
static void
cxgbe_init(void *arg)
{
struct port_info *pi = arg;
struct adapter *sc = pi->adapter;
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
if (begin_synchronized_op(sc, pi, SLEEP_OK | INTR_OK, "t4init") != 0)
return;
cxgbe_init_synchronized(pi);
end_synchronized_op(sc, 0);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
static int
cxgbe_ioctl(struct ifnet *ifp, unsigned long cmd, caddr_t data)
{
int rc = 0, mtu, flags;
struct port_info *pi = ifp->if_softc;
struct adapter *sc = pi->adapter;
struct ifreq *ifr = (struct ifreq *)data;
uint32_t mask;
switch (cmd) {
case SIOCSIFMTU:
mtu = ifr->ifr_mtu;
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
if ((mtu < ETHERMIN) || (mtu > ETHERMTU_JUMBO))
return (EINVAL);
rc = begin_synchronized_op(sc, pi, SLEEP_OK | INTR_OK, "t4mtu");
if (rc)
return (rc);
ifp->if_mtu = mtu;
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
t4_update_fl_bufsize(ifp);
rc = update_mac_settings(pi, XGMAC_MTU);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
end_synchronized_op(sc, 0);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
break;
case SIOCSIFFLAGS:
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
rc = begin_synchronized_op(sc, pi, SLEEP_OK | INTR_OK, "t4flg");
if (rc)
return (rc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (ifp->if_flags & IFF_UP) {
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
flags = pi->if_flags;
if ((ifp->if_flags ^ flags) &
(IFF_PROMISC | IFF_ALLMULTI)) {
rc = update_mac_settings(pi,
XGMAC_PROMISC | XGMAC_ALLMULTI);
}
} else
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
rc = cxgbe_init_synchronized(pi);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
pi->if_flags = ifp->if_flags;
} else if (ifp->if_drv_flags & IFF_DRV_RUNNING)
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
rc = cxgbe_uninit_synchronized(pi);
end_synchronized_op(sc, 0);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
break;
case SIOCADDMULTI:
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
case SIOCDELMULTI: /* these two are called with a mutex held :-( */
rc = begin_synchronized_op(sc, pi, HOLD_LOCK, "t4multi");
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (rc)
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
return (rc);
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
rc = update_mac_settings(pi, XGMAC_MCADDRS);
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
end_synchronized_op(sc, LOCK_HELD);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
break;
case SIOCSIFCAP:
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
rc = begin_synchronized_op(sc, pi, SLEEP_OK | INTR_OK, "t4cap");
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (rc)
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
return (rc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
mask = ifr->ifr_reqcap ^ ifp->if_capenable;
if (mask & IFCAP_TXCSUM) {
ifp->if_capenable ^= IFCAP_TXCSUM;
ifp->if_hwassist ^= (CSUM_TCP | CSUM_UDP | CSUM_IP);
- Assign (don't OR) the CSUM_XXX bits to csum_flags in the rx checksum code. - Fix TSO/TSO4 mixup. - Add IFCAP_LINKSTATE to the available/enabled capabilities.
2012-06-30 02:05:09 +00:00
if (IFCAP_TSO4 & ifp->if_capenable &&
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
!(IFCAP_TXCSUM & ifp->if_capenable)) {
cxgbe(4): support for IPv6 hardware checksumming (rx and tx).
2012-06-29 16:50:52 +00:00
ifp->if_capenable &= ~IFCAP_TSO4;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if_printf(ifp,
- Assign (don't OR) the CSUM_XXX bits to csum_flags in the rx checksum code. - Fix TSO/TSO4 mixup. - Add IFCAP_LINKSTATE to the available/enabled capabilities.
2012-06-30 02:05:09 +00:00
"tso4 disabled due to -txcsum.\n");
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
}
cxgbe(4): support for IPv6 hardware checksumming (rx and tx).
2012-06-29 16:50:52 +00:00
if (mask & IFCAP_TXCSUM_IPV6) {
ifp->if_capenable ^= IFCAP_TXCSUM_IPV6;
ifp->if_hwassist ^= (CSUM_UDP_IPV6 | CSUM_TCP_IPV6);
if (IFCAP_TSO6 & ifp->if_capenable &&
!(IFCAP_TXCSUM_IPV6 & ifp->if_capenable)) {
ifp->if_capenable &= ~IFCAP_TSO6;
if_printf(ifp,
"tso6 disabled due to -txcsum6.\n");
}
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (mask & IFCAP_RXCSUM)
ifp->if_capenable ^= IFCAP_RXCSUM;
cxgbe(4): support for IPv6 hardware checksumming (rx and tx).
2012-06-29 16:50:52 +00:00
if (mask & IFCAP_RXCSUM_IPV6)
ifp->if_capenable ^= IFCAP_RXCSUM_IPV6;
/*
* Note that we leave CSUM_TSO alone (it is always set). The
* kernel takes both IFCAP_TSOx and CSUM_TSO into account before
* sending a TSO request our way, so it's sufficient to toggle
* IFCAP_TSOx only.
*/
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (mask & IFCAP_TSO4) {
cxgbe(4): support for IPv6 hardware checksumming (rx and tx).
2012-06-29 16:50:52 +00:00
if (!(IFCAP_TSO4 & ifp->if_capenable) &&
!(IFCAP_TXCSUM & ifp->if_capenable)) {
if_printf(ifp, "enable txcsum first.\n");
rc = EAGAIN;
goto fail;
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
ifp->if_capenable ^= IFCAP_TSO4;
cxgbe(4): support for IPv6 hardware checksumming (rx and tx).
2012-06-29 16:50:52 +00:00
}
if (mask & IFCAP_TSO6) {
if (!(IFCAP_TSO6 & ifp->if_capenable) &&
!(IFCAP_TXCSUM_IPV6 & ifp->if_capenable)) {
if_printf(ifp, "enable txcsum6 first.\n");
rc = EAGAIN;
goto fail;
}
ifp->if_capenable ^= IFCAP_TSO6;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
if (mask & IFCAP_LRO) {
cxgbe(4): support for IPv6 TSO and LRO. Submitted by: bz (this is a modified version of that patch)
2012-06-29 19:51:06 +00:00
#if defined(INET) || defined(INET6)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
int i;
struct sge_rxq *rxq;
ifp->if_capenable ^= IFCAP_LRO;
for_each_rxq(pi, i, rxq) {
if (ifp->if_capenable & IFCAP_LRO)
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
rxq->iq.flags |= IQ_LRO_ENABLED;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
else
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
rxq->iq.flags &= ~IQ_LRO_ENABLED;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
#endif
}
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (mask & IFCAP_TOE) {
int enable = (ifp->if_capenable ^ mask) & IFCAP_TOE;
rc = toe_capability(pi, enable);
if (rc != 0)
goto fail;
ifp->if_capenable ^= mask;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
#endif
if (mask & IFCAP_VLAN_HWTAGGING) {
ifp->if_capenable ^= IFCAP_VLAN_HWTAGGING;
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
rc = update_mac_settings(pi, XGMAC_VLANEX);
}
if (mask & IFCAP_VLAN_MTU) {
ifp->if_capenable ^= IFCAP_VLAN_MTU;
/* Need to find out how to disable auto-mtu-inflation */
}
if (mask & IFCAP_VLAN_HWTSO)
ifp->if_capenable ^= IFCAP_VLAN_HWTSO;
if (mask & IFCAP_VLAN_HWCSUM)
ifp->if_capenable ^= IFCAP_VLAN_HWCSUM;
#ifdef VLAN_CAPABILITIES
VLAN_CAPABILITIES(ifp);
#endif
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
fail:
end_synchronized_op(sc, 0);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
break;
case SIOCSIFMEDIA:
case SIOCGIFMEDIA:
ifmedia_ioctl(ifp, ifr, &pi->media, cmd);
break;
default:
rc = ether_ioctl(ifp, cmd, data);
}
return (rc);
}
static int
cxgbe_transmit(struct ifnet *ifp, struct mbuf *m)
{
struct port_info *pi = ifp->if_softc;
struct adapter *sc = pi->adapter;
struct sge_txq *txq = &sc->sge.txq[pi->first_txq];
struct buf_ring *br;
int rc;
M_ASSERTPKTHDR(m);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (__predict_false(pi->link_cfg.link_ok == 0)) {
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
m_freem(m);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return (ENETDOWN);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
if (m->m_flags & M_FLOWID)
txq += (m->m_pkthdr.flowid % pi->ntxq);
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
br = txq->br;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (TXQ_TRYLOCK(txq) == 0) {
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct sge_eq *eq = &txq->eq;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/*
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
* It is possible that t4_eth_tx finishes up and releases the
* lock between the TRYLOCK above and the drbr_enqueue here. We
* need to make sure that this mbuf doesn't just sit there in
* the drbr.
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
*/
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
rc = drbr_enqueue(ifp, br, m);
if (rc == 0 && callout_pending(&eq->tx_callout) == 0 &&
!(eq->flags & EQ_DOOMED))
callout_reset(&eq->tx_callout, 1, t4_tx_callout, eq);
return (rc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
/*
* txq->m is the mbuf that is held up due to a temporary shortage of
* resources and it should be put on the wire first. Then what's in
* drbr and finally the mbuf that was just passed in to us.
*
* Return code should indicate the fate of the mbuf that was passed in
* this time.
*/
TXQ_LOCK_ASSERT_OWNED(txq);
if (drbr_needs_enqueue(ifp, br) || txq->m) {
/* Queued for transmission. */
rc = drbr_enqueue(ifp, br, m);
m = txq->m ? txq->m : drbr_dequeue(ifp, br);
(void) t4_eth_tx(ifp, txq, m);
TXQ_UNLOCK(txq);
return (rc);
}
/* Direct transmission. */
rc = t4_eth_tx(ifp, txq, m);
if (rc != 0 && txq->m)
rc = 0; /* held, will be transmitted soon (hopefully) */
TXQ_UNLOCK(txq);
return (rc);
}
static void
cxgbe_qflush(struct ifnet *ifp)
{
struct port_info *pi = ifp->if_softc;
Fix a couple of bad races that can occur when a cxgbe interface is taken down. The ingress queue lock was unused and has been removed as part of these changes. - An in-flight egress update from the SGE must be handled before the queue that requested it is destroyed. Wait for the update to arrive. - Interrupt handlers must stop processing rx events for a queue before the queue is destroyed. Events that have not yet been processed should be ignored once the queue disappears. MFC after: 1 week
2011-04-15 03:09:27 +00:00
struct sge_txq *txq;
int i;
struct mbuf *m;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/* queues do not exist if !PORT_INIT_DONE. */
if (pi->flags & PORT_INIT_DONE) {
Fix a couple of bad races that can occur when a cxgbe interface is taken down. The ingress queue lock was unused and has been removed as part of these changes. - An in-flight egress update from the SGE must be handled before the queue that requested it is destroyed. Wait for the update to arrive. - Interrupt handlers must stop processing rx events for a queue before the queue is destroyed. Events that have not yet been processed should be ignored once the queue disappears. MFC after: 1 week
2011-04-15 03:09:27 +00:00
for_each_txq(pi, i, txq) {
TXQ_LOCK(txq);
m_freem(txq->m);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
txq->m = NULL;
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
while ((m = buf_ring_dequeue_sc(txq->br)) != NULL)
Fix a couple of bad races that can occur when a cxgbe interface is taken down. The ingress queue lock was unused and has been removed as part of these changes. - An in-flight egress update from the SGE must be handled before the queue that requested it is destroyed. Wait for the update to arrive. - Interrupt handlers must stop processing rx events for a queue before the queue is destroyed. Events that have not yet been processed should be ignored once the queue disappears. MFC after: 1 week
2011-04-15 03:09:27 +00:00
m_freem(m);
TXQ_UNLOCK(txq);
}
}
if_qflush(ifp);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
static int
cxgbe_media_change(struct ifnet *ifp)
{
struct port_info *pi = ifp->if_softc;
device_printf(pi->dev, "%s unimplemented.\n", __func__);
return (EOPNOTSUPP);
}
static void
cxgbe_media_status(struct ifnet *ifp, struct ifmediareq *ifmr)
{
struct port_info *pi = ifp->if_softc;
struct ifmedia_entry *cur = pi->media.ifm_cur;
int speed = pi->link_cfg.speed;
int data = (pi->port_type << 8) | pi->mod_type;
if (cur->ifm_data != data) {
build_medialist(pi);
cur = pi->media.ifm_cur;
}
ifmr->ifm_status = IFM_AVALID;
if (!pi->link_cfg.link_ok)
return;
ifmr->ifm_status |= IFM_ACTIVE;
/* active and current will differ iff current media is autoselect. */
if (IFM_SUBTYPE(cur->ifm_media) != IFM_AUTO)
return;
ifmr->ifm_active = IFM_ETHER | IFM_FDX;
if (speed == SPEED_10000)
ifmr->ifm_active |= IFM_10G_T;
else if (speed == SPEED_1000)
ifmr->ifm_active |= IFM_1000_T;
else if (speed == SPEED_100)
ifmr->ifm_active |= IFM_100_TX;
else if (speed == SPEED_10)
ifmr->ifm_active |= IFM_10_T;
else
KASSERT(0, ("%s: link up but speed unknown (%u)", __func__,
speed));
}
void
t4_fatal_err(struct adapter *sc)
{
t4_set_reg_field(sc, A_SGE_CONTROL, F_GLOBALENABLE, 0);
t4_intr_disable(sc);
log(LOG_EMERG, "%s: encountered fatal error, adapter stopped.\n",
device_get_nameunit(sc->dev));
}
static int
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
map_bars_0_and_4(struct adapter *sc)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
sc->regs_rid = PCIR_BAR(0);
sc->regs_res = bus_alloc_resource_any(sc->dev, SYS_RES_MEMORY,
&sc->regs_rid, RF_ACTIVE);
if (sc->regs_res == NULL) {
device_printf(sc->dev, "cannot map registers.\n");
return (ENXIO);
}
sc->bt = rman_get_bustag(sc->regs_res);
sc->bh = rman_get_bushandle(sc->regs_res);
sc->mmio_len = rman_get_size(sc->regs_res);
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
setbit(&sc->doorbells, DOORBELL_KDB);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
sc->msix_rid = PCIR_BAR(4);
sc->msix_res = bus_alloc_resource_any(sc->dev, SYS_RES_MEMORY,
&sc->msix_rid, RF_ACTIVE);
if (sc->msix_res == NULL) {
device_printf(sc->dev, "cannot map MSI-X BAR.\n");
return (ENXIO);
}
return (0);
}
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
static int
map_bar_2(struct adapter *sc)
{
/*
* T4: only iWARP driver uses the userspace doorbells. There is no need
* to map it if RDMA is disabled.
*/
if (is_t4(sc) && sc->rdmacaps == 0)
return (0);
sc->udbs_rid = PCIR_BAR(2);
sc->udbs_res = bus_alloc_resource_any(sc->dev, SYS_RES_MEMORY,
&sc->udbs_rid, RF_ACTIVE);
if (sc->udbs_res == NULL) {
device_printf(sc->dev, "cannot map doorbell BAR.\n");
return (ENXIO);
}
sc->udbs_base = rman_get_virtual(sc->udbs_res);
if (is_t5(sc)) {
setbit(&sc->doorbells, DOORBELL_UDB);
#if defined(__i386__) || defined(__amd64__)
if (t5_write_combine) {
int rc;
/*
* Enable write combining on BAR2. This is the
* userspace doorbell BAR and is split into 128B
* (UDBS_SEG_SIZE) doorbell regions, each associated
* with an egress queue. The first 64B has the doorbell
* and the second 64B can be used to submit a tx work
* request with an implicit doorbell.
*/
rc = pmap_change_attr((vm_offset_t)sc->udbs_base,
rman_get_size(sc->udbs_res), PAT_WRITE_COMBINING);
if (rc == 0) {
clrbit(&sc->doorbells, DOORBELL_UDB);
Cosmetic change (s/wrwc/wcwr/;s/WRWC/WCWR/). MFC after: 3 days.
2013-04-11 22:49:29 +00:00
setbit(&sc->doorbells, DOORBELL_WCWR);
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
setbit(&sc->doorbells, DOORBELL_UDBWC);
} else {
device_printf(sc->dev,
"couldn't enable write combining: %d\n",
rc);
}
t4_write_reg(sc, A_SGE_STAT_CFG,
V_STATSOURCE_T5(7) | V_STATMODE(0));
}
#endif
}
return (0);
}
static const struct memwin t4_memwin[] = {
{ MEMWIN0_BASE, MEMWIN0_APERTURE },
{ MEMWIN1_BASE, MEMWIN1_APERTURE },
{ MEMWIN2_BASE_T4, MEMWIN2_APERTURE_T4 }
};
static const struct memwin t5_memwin[] = {
{ MEMWIN0_BASE, MEMWIN0_APERTURE },
{ MEMWIN1_BASE, MEMWIN1_APERTURE },
{ MEMWIN2_BASE_T5, MEMWIN2_APERTURE_T5 },
};
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static void
setup_memwin(struct adapter *sc)
{
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
const struct memwin *mw;
int i, n;
Allow cxgbe(4) running within a VM to attach to its devices that have been exported via PCI passthrough. - Do not check for a specific physical function (PF) before claiming a device. Different PFs have different device-ids so this check is redundant anyway. - Obtain the PF# from the WHOAMI register instead of pci_get_function(). - Setup the memory windows using the real BAR0 address, not what the VM says it is. Obtained from: Chelsio Communications
2012-06-26 00:34:34 +00:00
uint32_t bar0;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
if (is_t4(sc)) {
/*
* Read low 32b of bar0 indirectly via the hardware backdoor
* mechanism. Works from within PCI passthrough environments
* too, where rman_get_start() can return a different value. We
* need to program the T4 memory window decoders with the actual
* addresses that will be coming across the PCIe link.
*/
bar0 = t4_hw_pci_read_cfg4(sc, PCIR_BAR(0));
bar0 &= (uint32_t) PCIM_BAR_MEM_BASE;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
mw = &t4_memwin[0];
n = nitems(t4_memwin);
} else {
/* T5 uses the relative offset inside the PCIe BAR */
bar0 = 0;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
mw = &t5_memwin[0];
n = nitems(t5_memwin);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
for (i = 0; i < n; i++, mw++) {
t4_write_reg(sc,
PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_BASE_WIN, i),
(mw->base + bar0) | V_BIR(0) |
V_WINDOW(ilog2(mw->aperture) - 10));
}
Allow cxgbe(4) running within a VM to attach to its devices that have been exported via PCI passthrough. - Do not check for a specific physical function (PF) before claiming a device. Different PFs have different device-ids so this check is redundant anyway. - Obtain the PF# from the WHOAMI register instead of pci_get_function(). - Setup the memory windows using the real BAR0 address, not what the VM says it is. Obtained from: Chelsio Communications
2012-06-26 00:34:34 +00:00
/* flush */
t4_read_reg(sc, PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_BASE_WIN, 2));
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
/*
* Verify that the memory range specified by the addr/len pair is valid and lies
* entirely within a single region (EDCx or MCx).
*/
static int
validate_mem_range(struct adapter *sc, uint32_t addr, int len)
{
uint32_t em, addr_len, maddr, mlen;
/* Memory can only be accessed in naturally aligned 4 byte units */
if (addr & 3 || len & 3 || len == 0)
return (EINVAL);
/* Enabled memories */
em = t4_read_reg(sc, A_MA_TARGET_MEM_ENABLE);
if (em & F_EDRAM0_ENABLE) {
addr_len = t4_read_reg(sc, A_MA_EDRAM0_BAR);
maddr = G_EDRAM0_BASE(addr_len) << 20;
mlen = G_EDRAM0_SIZE(addr_len) << 20;
if (mlen > 0 && addr >= maddr && addr < maddr + mlen &&
addr + len <= maddr + mlen)
return (0);
}
if (em & F_EDRAM1_ENABLE) {
addr_len = t4_read_reg(sc, A_MA_EDRAM1_BAR);
maddr = G_EDRAM1_BASE(addr_len) << 20;
mlen = G_EDRAM1_SIZE(addr_len) << 20;
if (mlen > 0 && addr >= maddr && addr < maddr + mlen &&
addr + len <= maddr + mlen)
return (0);
}
if (em & F_EXT_MEM_ENABLE) {
addr_len = t4_read_reg(sc, A_MA_EXT_MEMORY_BAR);
maddr = G_EXT_MEM_BASE(addr_len) << 20;
mlen = G_EXT_MEM_SIZE(addr_len) << 20;
if (mlen > 0 && addr >= maddr && addr < maddr + mlen &&
addr + len <= maddr + mlen)
return (0);
}
if (!is_t4(sc) && em & F_EXT_MEM1_ENABLE) {
addr_len = t4_read_reg(sc, A_MA_EXT_MEMORY1_BAR);
maddr = G_EXT_MEM1_BASE(addr_len) << 20;
mlen = G_EXT_MEM1_SIZE(addr_len) << 20;
if (mlen > 0 && addr >= maddr && addr < maddr + mlen &&
addr + len <= maddr + mlen)
return (0);
}
return (EFAULT);
}
/*
* Verify that the memory range specified by the memtype/offset/len pair is
* valid and lies entirely within the memtype specified. The global address of
* the start of the range is returned in addr.
*/
static int
validate_mt_off_len(struct adapter *sc, int mtype, uint32_t off, int len,
uint32_t *addr)
{
uint32_t em, addr_len, maddr, mlen;
/* Memory can only be accessed in naturally aligned 4 byte units */
if (off & 3 || len & 3 || len == 0)
return (EINVAL);
em = t4_read_reg(sc, A_MA_TARGET_MEM_ENABLE);
switch (mtype) {
case MEM_EDC0:
if (!(em & F_EDRAM0_ENABLE))
return (EINVAL);
addr_len = t4_read_reg(sc, A_MA_EDRAM0_BAR);
maddr = G_EDRAM0_BASE(addr_len) << 20;
mlen = G_EDRAM0_SIZE(addr_len) << 20;
break;
case MEM_EDC1:
if (!(em & F_EDRAM1_ENABLE))
return (EINVAL);
addr_len = t4_read_reg(sc, A_MA_EDRAM1_BAR);
maddr = G_EDRAM1_BASE(addr_len) << 20;
mlen = G_EDRAM1_SIZE(addr_len) << 20;
break;
case MEM_MC:
if (!(em & F_EXT_MEM_ENABLE))
return (EINVAL);
addr_len = t4_read_reg(sc, A_MA_EXT_MEMORY_BAR);
maddr = G_EXT_MEM_BASE(addr_len) << 20;
mlen = G_EXT_MEM_SIZE(addr_len) << 20;
break;
case MEM_MC1:
if (is_t4(sc) || !(em & F_EXT_MEM1_ENABLE))
return (EINVAL);
addr_len = t4_read_reg(sc, A_MA_EXT_MEMORY1_BAR);
maddr = G_EXT_MEM1_BASE(addr_len) << 20;
mlen = G_EXT_MEM1_SIZE(addr_len) << 20;
break;
default:
return (EINVAL);
}
if (mlen > 0 && off < mlen && off + len <= mlen) {
*addr = maddr + off; /* global address */
return (0);
}
return (EFAULT);
}
static void
memwin_info(struct adapter *sc, int win, uint32_t *base, uint32_t *aperture)
{
const struct memwin *mw;
if (is_t4(sc)) {
KASSERT(win >= 0 && win < nitems(t4_memwin),
("%s: incorrect memwin# (%d)", __func__, win));
mw = &t4_memwin[win];
} else {
KASSERT(win >= 0 && win < nitems(t5_memwin),
("%s: incorrect memwin# (%d)", __func__, win));
mw = &t5_memwin[win];
}
if (base != NULL)
*base = mw->base;
if (aperture != NULL)
*aperture = mw->aperture;
}
/*
* Positions the memory window such that it can be used to access the specified
* address in the chip's address space. The return value is the offset of addr
* from the start of the window.
*/
static uint32_t
position_memwin(struct adapter *sc, int n, uint32_t addr)
{
uint32_t start, pf;
uint32_t reg;
KASSERT(n >= 0 && n <= 3,
("%s: invalid window %d.", __func__, n));
KASSERT((addr & 3) == 0,
("%s: addr (0x%x) is not at a 4B boundary.", __func__, addr));
if (is_t4(sc)) {
pf = 0;
start = addr & ~0xf; /* start must be 16B aligned */
} else {
pf = V_PFNUM(sc->pf);
start = addr & ~0x7f; /* start must be 128B aligned */
}
reg = PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_OFFSET, n);
t4_write_reg(sc, reg, start | pf);
t4_read_reg(sc, reg);
return (addr - start);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static int
cfg_itype_and_nqueues(struct adapter *sc, int n10g, int n1g,
struct intrs_and_queues *iaq)
{
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
int rc, itype, navail, nrxq10g, nrxq1g, n;
int nofldrxq10g = 0, nofldrxq1g = 0;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
bzero(iaq, sizeof(*iaq));
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
iaq->ntxq10g = t4_ntxq10g;
iaq->ntxq1g = t4_ntxq1g;
iaq->nrxq10g = nrxq10g = t4_nrxq10g;
iaq->nrxq1g = nrxq1g = t4_nrxq1g;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Do not allocate extra vectors when adapter is not TOE capable (or toecaps have been disallowed by the user). + one very minor unrelated cleanup in t4_sge.c
2012-06-22 22:59:42 +00:00
if (is_offload(sc)) {
iaq->nofldtxq10g = t4_nofldtxq10g;
iaq->nofldtxq1g = t4_nofldtxq1g;
iaq->nofldrxq10g = nofldrxq10g = t4_nofldrxq10g;
iaq->nofldrxq1g = nofldrxq1g = t4_nofldrxq1g;
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
#endif
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Do not over-allocate MSI interrupts for the case where each ingress queue has its own interrupt. If the exact number that we need is not a power of 2 and we're using MSI, then switch to interrupt multiplexing. While here, replace the magic numbers with something more readable. MFC after: 3 days
2011-03-24 01:03:01 +00:00
for (itype = INTR_MSIX; itype; itype >>= 1) {
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if ((itype & t4_intr_types) == 0)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
continue; /* not allowed */
Do not over-allocate MSI interrupts for the case where each ingress queue has its own interrupt. If the exact number that we need is not a power of 2 and we're using MSI, then switch to interrupt multiplexing. While here, replace the magic numbers with something more readable. MFC after: 3 days
2011-03-24 01:03:01 +00:00
if (itype == INTR_MSIX)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
navail = pci_msix_count(sc->dev);
Do not over-allocate MSI interrupts for the case where each ingress queue has its own interrupt. If the exact number that we need is not a power of 2 and we're using MSI, then switch to interrupt multiplexing. While here, replace the magic numbers with something more readable. MFC after: 3 days
2011-03-24 01:03:01 +00:00
else if (itype == INTR_MSI)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
navail = pci_msi_count(sc->dev);
else
navail = 1;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
restart:
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (navail == 0)
continue;
iaq->intr_type = itype;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
iaq->intr_flags = 0;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/*
* Best option: an interrupt vector for errors, one for the
* firmware event queue, and one each for each rxq (NIC as well
* as offload).
*/
iaq->nirq = T4_EXTRA_INTR;
iaq->nirq += n10g * (nrxq10g + nofldrxq10g);
iaq->nirq += n1g * (nrxq1g + nofldrxq1g);
if (iaq->nirq <= navail &&
(itype != INTR_MSI || powerof2(iaq->nirq))) {
iaq->intr_flags |= INTR_DIRECT;
goto allocate;
}
Do not over-allocate MSI interrupts for the case where each ingress queue has its own interrupt. If the exact number that we need is not a power of 2 and we're using MSI, then switch to interrupt multiplexing. While here, replace the magic numbers with something more readable. MFC after: 3 days
2011-03-24 01:03:01 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/*
* Second best option: an interrupt vector for errors, one for
* the firmware event queue, and one each for either NIC or
* offload rxq's.
*/
iaq->nirq = T4_EXTRA_INTR;
iaq->nirq += n10g * max(nrxq10g, nofldrxq10g);
iaq->nirq += n1g * max(nrxq1g, nofldrxq1g);
if (iaq->nirq <= navail &&
(itype != INTR_MSI || powerof2(iaq->nirq)))
goto allocate;
Do not over-allocate MSI interrupts for the case where each ingress queue has its own interrupt. If the exact number that we need is not a power of 2 and we're using MSI, then switch to interrupt multiplexing. While here, replace the magic numbers with something more readable. MFC after: 3 days
2011-03-24 01:03:01 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/*
* Next best option: an interrupt vector for errors, one for the
* firmware event queue, and at least one per port. At this
* point we know we'll have to downsize nrxq or nofldrxq to fit
* what's available to us.
*/
iaq->nirq = T4_EXTRA_INTR;
iaq->nirq += n10g + n1g;
if (iaq->nirq <= navail) {
int leftover = navail - iaq->nirq;
if (n10g > 0) {
int target = max(nrxq10g, nofldrxq10g);
n = 1;
while (n < target && leftover >= n10g) {
leftover -= n10g;
iaq->nirq += n10g;
n++;
}
iaq->nrxq10g = min(n, nrxq10g);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Do not allocate extra vectors when adapter is not TOE capable (or toecaps have been disallowed by the user). + one very minor unrelated cleanup in t4_sge.c
2012-06-22 22:59:42 +00:00
if (is_offload(sc))
iaq->nofldrxq10g = min(n, nofldrxq10g);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
#endif
}
Do not over-allocate MSI interrupts for the case where each ingress queue has its own interrupt. If the exact number that we need is not a power of 2 and we're using MSI, then switch to interrupt multiplexing. While here, replace the magic numbers with something more readable. MFC after: 3 days
2011-03-24 01:03:01 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (n1g > 0) {
int target = max(nrxq1g, nofldrxq1g);
Do not over-allocate MSI interrupts for the case where each ingress queue has its own interrupt. If the exact number that we need is not a power of 2 and we're using MSI, then switch to interrupt multiplexing. While here, replace the magic numbers with something more readable. MFC after: 3 days
2011-03-24 01:03:01 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
n = 1;
while (n < target && leftover >= n1g) {
leftover -= n1g;
iaq->nirq += n1g;
n++;
Do not over-allocate MSI interrupts for the case where each ingress queue has its own interrupt. If the exact number that we need is not a power of 2 and we're using MSI, then switch to interrupt multiplexing. While here, replace the magic numbers with something more readable. MFC after: 3 days
2011-03-24 01:03:01 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
iaq->nrxq1g = min(n, nrxq1g);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Do not allocate extra vectors when adapter is not TOE capable (or toecaps have been disallowed by the user). + one very minor unrelated cleanup in t4_sge.c
2012-06-22 22:59:42 +00:00
if (is_offload(sc))
iaq->nofldrxq1g = min(n, nofldrxq1g);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
#endif
Do not over-allocate MSI interrupts for the case where each ingress queue has its own interrupt. If the exact number that we need is not a power of 2 and we're using MSI, then switch to interrupt multiplexing. While here, replace the magic numbers with something more readable. MFC after: 3 days
2011-03-24 01:03:01 +00:00
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (itype != INTR_MSI || powerof2(iaq->nirq))
goto allocate;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/*
* Least desirable option: one interrupt vector for everything.
*/
iaq->nirq = iaq->nrxq10g = iaq->nrxq1g = 1;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Do not allocate extra vectors when adapter is not TOE capable (or toecaps have been disallowed by the user). + one very minor unrelated cleanup in t4_sge.c
2012-06-22 22:59:42 +00:00
if (is_offload(sc))
iaq->nofldrxq10g = iaq->nofldrxq1g = 1;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
#endif
allocate:
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
navail = iaq->nirq;
rc = 0;
Do not over-allocate MSI interrupts for the case where each ingress queue has its own interrupt. If the exact number that we need is not a power of 2 and we're using MSI, then switch to interrupt multiplexing. While here, replace the magic numbers with something more readable. MFC after: 3 days
2011-03-24 01:03:01 +00:00
if (itype == INTR_MSIX)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
rc = pci_alloc_msix(sc->dev, &navail);
Do not over-allocate MSI interrupts for the case where each ingress queue has its own interrupt. If the exact number that we need is not a power of 2 and we're using MSI, then switch to interrupt multiplexing. While here, replace the magic numbers with something more readable. MFC after: 3 days
2011-03-24 01:03:01 +00:00
else if (itype == INTR_MSI)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
rc = pci_alloc_msi(sc->dev, &navail);
if (rc == 0) {
if (navail == iaq->nirq)
return (0);
/*
* Didn't get the number requested. Use whatever number
* the kernel is willing to allocate (it's in navail).
*/
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
device_printf(sc->dev, "fewer vectors than requested, "
"type=%d, req=%d, rcvd=%d; will downshift req.\n",
itype, iaq->nirq, navail);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
pci_release_msi(sc->dev);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
goto restart;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
device_printf(sc->dev,
"failed to allocate vectors:%d, type=%d, req=%d, rcvd=%d\n",
itype, rc, iaq->nirq, navail);
}
device_printf(sc->dev,
"failed to find a usable interrupt type. "
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
"allowed=%d, msi-x=%d, msi=%d, intx=1", t4_intr_types,
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
pci_msix_count(sc->dev), pci_msi_count(sc->dev));
return (ENXIO);
}
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
#define FW_VERSION(chip) ( \
V_FW_HDR_FW_VER_MAJOR(FW_VERSION_MAJOR_##chip) | \
V_FW_HDR_FW_VER_MINOR(FW_VERSION_MINOR_##chip) | \
V_FW_HDR_FW_VER_MICRO(FW_VERSION_MICRO_##chip) | \
V_FW_HDR_FW_VER_BUILD(FW_VERSION_BUILD_##chip))
#define FW_INTFVER(chip, intf) (FW_HDR_INTFVER_##intf)
struct fw_info {
uint8_t chip;
char *kld_name;
char *fw_mod_name;
struct fw_hdr fw_hdr; /* XXX: waste of space, need a sparse struct */
} fw_info[] = {
{
.chip = CHELSIO_T4,
.kld_name = "t4fw_cfg",
.fw_mod_name = "t4fw",
.fw_hdr = {
.chip = FW_HDR_CHIP_T4,
.fw_ver = htobe32_const(FW_VERSION(T4)),
.intfver_nic = FW_INTFVER(T4, NIC),
.intfver_vnic = FW_INTFVER(T4, VNIC),
.intfver_ofld = FW_INTFVER(T4, OFLD),
.intfver_ri = FW_INTFVER(T4, RI),
.intfver_iscsipdu = FW_INTFVER(T4, ISCSIPDU),
.intfver_iscsi = FW_INTFVER(T4, ISCSI),
.intfver_fcoepdu = FW_INTFVER(T4, FCOEPDU),
.intfver_fcoe = FW_INTFVER(T4, FCOE),
},
}, {
.chip = CHELSIO_T5,
.kld_name = "t5fw_cfg",
.fw_mod_name = "t5fw",
.fw_hdr = {
.chip = FW_HDR_CHIP_T5,
.fw_ver = htobe32_const(FW_VERSION(T5)),
.intfver_nic = FW_INTFVER(T5, NIC),
.intfver_vnic = FW_INTFVER(T5, VNIC),
.intfver_ofld = FW_INTFVER(T5, OFLD),
.intfver_ri = FW_INTFVER(T5, RI),
.intfver_iscsipdu = FW_INTFVER(T5, ISCSIPDU),
.intfver_iscsi = FW_INTFVER(T5, ISCSI),
.intfver_fcoepdu = FW_INTFVER(T5, FCOEPDU),
.intfver_fcoe = FW_INTFVER(T5, FCOE),
},
}
};
static struct fw_info *
find_fw_info(int chip)
{
int i;
for (i = 0; i < nitems(fw_info); i++) {
if (fw_info[i].chip == chip)
return (&fw_info[i]);
}
return (NULL);
}
cxgbe(4): Consider all the API versions of the interfaces exported by the firmware (instead of just the main firmware version) when evaluating firmware compatibility. Document the new "hw.cxgbe.fw_install" knob being introduced here. This should fix kern/173584 too. Setting hw.cxgbe.fw_install=2 will mostly do what was requested in the PR but it's a bit more intelligent in that it won't reinstall the same firmware repeatedly if the knob is left set. PR: kern/173584 MFC after: 5 days
2013-02-26 20:35:54 +00:00
/*
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
* Is the given firmware API compatible with the one the driver was compiled
* with?
cxgbe(4): Consider all the API versions of the interfaces exported by the firmware (instead of just the main firmware version) when evaluating firmware compatibility. Document the new "hw.cxgbe.fw_install" knob being introduced here. This should fix kern/173584 too. Setting hw.cxgbe.fw_install=2 will mostly do what was requested in the PR but it's a bit more intelligent in that it won't reinstall the same firmware repeatedly if the knob is left set. PR: kern/173584 MFC after: 5 days
2013-02-26 20:35:54 +00:00
*/
static int
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
fw_compatible(const struct fw_hdr *hdr1, const struct fw_hdr *hdr2)
cxgbe(4): Consider all the API versions of the interfaces exported by the firmware (instead of just the main firmware version) when evaluating firmware compatibility. Document the new "hw.cxgbe.fw_install" knob being introduced here. This should fix kern/173584 too. Setting hw.cxgbe.fw_install=2 will mostly do what was requested in the PR but it's a bit more intelligent in that it won't reinstall the same firmware repeatedly if the knob is left set. PR: kern/173584 MFC after: 5 days
2013-02-26 20:35:54 +00:00
{
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
/* short circuit if it's the exact same firmware version */
if (hdr1->chip == hdr2->chip && hdr1->fw_ver == hdr2->fw_ver)
cxgbe(4): Consider all the API versions of the interfaces exported by the firmware (instead of just the main firmware version) when evaluating firmware compatibility. Document the new "hw.cxgbe.fw_install" knob being introduced here. This should fix kern/173584 too. Setting hw.cxgbe.fw_install=2 will mostly do what was requested in the PR but it's a bit more intelligent in that it won't reinstall the same firmware repeatedly if the knob is left set. PR: kern/173584 MFC after: 5 days
2013-02-26 20:35:54 +00:00
return (1);
/*
* XXX: Is this too conservative? Perhaps I should limit this to the
* features that are supported in the driver.
*/
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
#define SAME_INTF(x) (hdr1->intfver_##x == hdr2->intfver_##x)
if (hdr1->chip == hdr2->chip && SAME_INTF(nic) && SAME_INTF(vnic) &&
SAME_INTF(ofld) && SAME_INTF(ri) && SAME_INTF(iscsipdu) &&
SAME_INTF(iscsi) && SAME_INTF(fcoepdu) && SAME_INTF(fcoe))
cxgbe(4): Consider all the API versions of the interfaces exported by the firmware (instead of just the main firmware version) when evaluating firmware compatibility. Document the new "hw.cxgbe.fw_install" knob being introduced here. This should fix kern/173584 too. Setting hw.cxgbe.fw_install=2 will mostly do what was requested in the PR but it's a bit more intelligent in that it won't reinstall the same firmware repeatedly if the knob is left set. PR: kern/173584 MFC after: 5 days
2013-02-26 20:35:54 +00:00
return (1);
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
#undef SAME_INTF
cxgbe(4): Consider all the API versions of the interfaces exported by the firmware (instead of just the main firmware version) when evaluating firmware compatibility. Document the new "hw.cxgbe.fw_install" knob being introduced here. This should fix kern/173584 too. Setting hw.cxgbe.fw_install=2 will mostly do what was requested in the PR but it's a bit more intelligent in that it won't reinstall the same firmware repeatedly if the knob is left set. PR: kern/173584 MFC after: 5 days
2013-02-26 20:35:54 +00:00
return (0);
}
- Explain clearly why a different firmware is being installed (if/when it is being installed). Improve other error messages while here. - Select special FPGA specific configuration profile when appropriate. MFC after: 3 days
2013-04-11 19:39:40 +00:00
/*
* The firmware in the KLD is usable and can be installed. But should it be?
* This routine explains itself in detail if it indicates the KLD firmware
* should be installed.
*/
static int
should_install_kld_fw(struct adapter *sc, int card_fw_usable, int k, int c)
{
const char *reason;
KASSERT(t4_fw_install != 0, ("%s: Can't install; shouldn't be asked "
"to evaluate if install is a good idea.", __func__));
if (!card_fw_usable) {
reason = "incompatible or unusable";
goto install;
}
if (k > c) {
reason = "older than the version bundled with this driver";
goto install;
}
if (t4_fw_install == 2 && k != c) {
reason = "different than the version bundled with this driver";
goto install;
}
return (0);
install:
device_printf(sc->dev, "firmware on card (%u.%u.%u.%u) is %s, "
"installing firmware %u.%u.%u.%u on card.\n",
G_FW_HDR_FW_VER_MAJOR(c), G_FW_HDR_FW_VER_MINOR(c),
G_FW_HDR_FW_VER_MICRO(c), G_FW_HDR_FW_VER_BUILD(c), reason,
G_FW_HDR_FW_VER_MAJOR(k), G_FW_HDR_FW_VER_MINOR(k),
G_FW_HDR_FW_VER_MICRO(k), G_FW_HDR_FW_VER_BUILD(k));
return (1);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/*
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
* Establish contact with the firmware and determine if we are the master driver
* or not, and whether we are responsible for chip initialization.
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
*/
static int
prep_firmware(struct adapter *sc)
{
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
const struct firmware *fw = NULL, *default_cfg;
int rc, pf, card_fw_usable, kld_fw_usable, need_fw_reset = 1;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
enum dev_state state;
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
struct fw_info *fw_info;
struct fw_hdr *card_fw; /* fw on the card */
const struct fw_hdr *kld_fw; /* fw in the KLD */
const struct fw_hdr *drv_fw; /* fw header the driver was compiled
against */
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
/* Contact firmware. */
rc = t4_fw_hello(sc, sc->mbox, sc->mbox, MASTER_MAY, &state);
if (rc < 0 || state == DEV_STATE_ERR) {
rc = -rc;
device_printf(sc->dev,
"failed to connect to the firmware: %d, %d.\n", rc, state);
return (rc);
}
pf = rc;
if (pf == sc->mbox)
sc->flags |= MASTER_PF;
else if (state == DEV_STATE_UNINIT) {
/*
* We didn't get to be the master so we definitely won't be
* configuring the chip. It's a bug if someone else hasn't
* configured it already.
*/
device_printf(sc->dev, "couldn't be master(%d), "
"device not already initialized either(%d).\n", rc, state);
return (EDOOFUS);
}
/* This is the firmware whose headers the driver was compiled against */
fw_info = find_fw_info(chip_id(sc));
if (fw_info == NULL) {
device_printf(sc->dev,
"unable to look up firmware information for chip %d.\n",
chip_id(sc));
return (EINVAL);
}
drv_fw = &fw_info->fw_hdr;
/*
* The firmware KLD contains many modules. The KLD name is also the
* name of the module that contains the default config file.
*/
default_cfg = firmware_get(fw_info->kld_name);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4): Consider all the API versions of the interfaces exported by the firmware (instead of just the main firmware version) when evaluating firmware compatibility. Document the new "hw.cxgbe.fw_install" knob being introduced here. This should fix kern/173584 too. Setting hw.cxgbe.fw_install=2 will mostly do what was requested in the PR but it's a bit more intelligent in that it won't reinstall the same firmware repeatedly if the knob is left set. PR: kern/173584 MFC after: 5 days
2013-02-26 20:35:54 +00:00
/* Read the header of the firmware on the card */
card_fw = malloc(sizeof(*card_fw), M_CXGBE, M_ZERO | M_WAITOK);
rc = -t4_read_flash(sc, FLASH_FW_START,
sizeof (*card_fw) / sizeof (uint32_t), (uint32_t *)card_fw, 1);
if (rc == 0)
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
card_fw_usable = fw_compatible(drv_fw, (const void*)card_fw);
cxgbe(4): Consider all the API versions of the interfaces exported by the firmware (instead of just the main firmware version) when evaluating firmware compatibility. Document the new "hw.cxgbe.fw_install" knob being introduced here. This should fix kern/173584 too. Setting hw.cxgbe.fw_install=2 will mostly do what was requested in the PR but it's a bit more intelligent in that it won't reinstall the same firmware repeatedly if the knob is left set. PR: kern/173584 MFC after: 5 days
2013-02-26 20:35:54 +00:00
else {
device_printf(sc->dev,
"Unable to read card's firmware header: %d\n", rc);
card_fw_usable = 0;
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Consider all the API versions of the interfaces exported by the firmware (instead of just the main firmware version) when evaluating firmware compatibility. Document the new "hw.cxgbe.fw_install" knob being introduced here. This should fix kern/173584 too. Setting hw.cxgbe.fw_install=2 will mostly do what was requested in the PR but it's a bit more intelligent in that it won't reinstall the same firmware repeatedly if the knob is left set. PR: kern/173584 MFC after: 5 days
2013-02-26 20:35:54 +00:00
/* This is the firmware in the KLD */
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
fw = firmware_get(fw_info->fw_mod_name);
cxgbe(4): Consider all the API versions of the interfaces exported by the firmware (instead of just the main firmware version) when evaluating firmware compatibility. Document the new "hw.cxgbe.fw_install" knob being introduced here. This should fix kern/173584 too. Setting hw.cxgbe.fw_install=2 will mostly do what was requested in the PR but it's a bit more intelligent in that it won't reinstall the same firmware repeatedly if the knob is left set. PR: kern/173584 MFC after: 5 days
2013-02-26 20:35:54 +00:00
if (fw != NULL) {
kld_fw = (const void *)fw->data;
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
kld_fw_usable = fw_compatible(drv_fw, kld_fw);
cxgbe(4): Consider all the API versions of the interfaces exported by the firmware (instead of just the main firmware version) when evaluating firmware compatibility. Document the new "hw.cxgbe.fw_install" knob being introduced here. This should fix kern/173584 too. Setting hw.cxgbe.fw_install=2 will mostly do what was requested in the PR but it's a bit more intelligent in that it won't reinstall the same firmware repeatedly if the knob is left set. PR: kern/173584 MFC after: 5 days
2013-02-26 20:35:54 +00:00
} else {
kld_fw = NULL;
kld_fw_usable = 0;
}
Upgrade the firmware on the card automatically if a better version is available. Downgrade only for a major version mismatch. MFC after: 1 week
2011-03-05 03:12:50 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
if (card_fw_usable && card_fw->fw_ver == drv_fw->fw_ver &&
(!kld_fw_usable || kld_fw->fw_ver == drv_fw->fw_ver ||
t4_fw_install == 0)) {
/*
* Common case: the firmware on the card is an exact match and
* the KLD is an exact match too, or the KLD is
* absent/incompatible, or we're prohibited from using it. Note
* that t4_fw_install = 2 is ignored here -- use cxgbetool
* loadfw if you want to reinstall the same firmware as the one
* on the card.
*/
} else if (kld_fw_usable && state == DEV_STATE_UNINIT &&
- Explain clearly why a different firmware is being installed (if/when it is being installed). Improve other error messages while here. - Select special FPGA specific configuration profile when appropriate. MFC after: 3 days
2013-04-11 19:39:40 +00:00
should_install_kld_fw(sc, card_fw_usable, be32toh(kld_fw->fw_ver),
be32toh(card_fw->fw_ver))) {
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Consider all the API versions of the interfaces exported by the firmware (instead of just the main firmware version) when evaluating firmware compatibility. Document the new "hw.cxgbe.fw_install" knob being introduced here. This should fix kern/173584 too. Setting hw.cxgbe.fw_install=2 will mostly do what was requested in the PR but it's a bit more intelligent in that it won't reinstall the same firmware repeatedly if the knob is left set. PR: kern/173584 MFC after: 5 days
2013-02-26 20:35:54 +00:00
rc = -t4_load_fw(sc, fw->data, fw->datasize);
if (rc != 0) {
device_printf(sc->dev,
"failed to install firmware: %d\n", rc);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
goto done;
Upgrade the firmware on the card automatically if a better version is available. Downgrade only for a major version mismatch. MFC after: 1 week
2011-03-05 03:12:50 +00:00
}
cxgbe(4): Consider all the API versions of the interfaces exported by the firmware (instead of just the main firmware version) when evaluating firmware compatibility. Document the new "hw.cxgbe.fw_install" knob being introduced here. This should fix kern/173584 too. Setting hw.cxgbe.fw_install=2 will mostly do what was requested in the PR but it's a bit more intelligent in that it won't reinstall the same firmware repeatedly if the knob is left set. PR: kern/173584 MFC after: 5 days
2013-02-26 20:35:54 +00:00
/* Installed successfully, update the cached header too. */
memcpy(card_fw, kld_fw, sizeof(*card_fw));
card_fw_usable = 1;
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
need_fw_reset = 0; /* already reset as part of load_fw */
cxgbe(4): Consider all the API versions of the interfaces exported by the firmware (instead of just the main firmware version) when evaluating firmware compatibility. Document the new "hw.cxgbe.fw_install" knob being introduced here. This should fix kern/173584 too. Setting hw.cxgbe.fw_install=2 will mostly do what was requested in the PR but it's a bit more intelligent in that it won't reinstall the same firmware repeatedly if the knob is left set. PR: kern/173584 MFC after: 5 days
2013-02-26 20:35:54 +00:00
}
Upgrade the firmware on the card automatically if a better version is available. Downgrade only for a major version mismatch. MFC after: 1 week
2011-03-05 03:12:50 +00:00
cxgbe(4): Consider all the API versions of the interfaces exported by the firmware (instead of just the main firmware version) when evaluating firmware compatibility. Document the new "hw.cxgbe.fw_install" knob being introduced here. This should fix kern/173584 too. Setting hw.cxgbe.fw_install=2 will mostly do what was requested in the PR but it's a bit more intelligent in that it won't reinstall the same firmware repeatedly if the knob is left set. PR: kern/173584 MFC after: 5 days
2013-02-26 20:35:54 +00:00
if (!card_fw_usable) {
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
uint32_t d, c, k;
cxgbe(4): Consider all the API versions of the interfaces exported by the firmware (instead of just the main firmware version) when evaluating firmware compatibility. Document the new "hw.cxgbe.fw_install" knob being introduced here. This should fix kern/173584 too. Setting hw.cxgbe.fw_install=2 will mostly do what was requested in the PR but it's a bit more intelligent in that it won't reinstall the same firmware repeatedly if the knob is left set. PR: kern/173584 MFC after: 5 days
2013-02-26 20:35:54 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
d = ntohl(drv_fw->fw_ver);
cxgbe(4): Consider all the API versions of the interfaces exported by the firmware (instead of just the main firmware version) when evaluating firmware compatibility. Document the new "hw.cxgbe.fw_install" knob being introduced here. This should fix kern/173584 too. Setting hw.cxgbe.fw_install=2 will mostly do what was requested in the PR but it's a bit more intelligent in that it won't reinstall the same firmware repeatedly if the knob is left set. PR: kern/173584 MFC after: 5 days
2013-02-26 20:35:54 +00:00
c = ntohl(card_fw->fw_ver);
k = kld_fw ? ntohl(kld_fw->fw_ver) : 0;
device_printf(sc->dev, "Cannot find a usable firmware: "
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
"fw_install %d, chip state %d, "
"driver compiled with %d.%d.%d.%d, "
cxgbe(4): Consider all the API versions of the interfaces exported by the firmware (instead of just the main firmware version) when evaluating firmware compatibility. Document the new "hw.cxgbe.fw_install" knob being introduced here. This should fix kern/173584 too. Setting hw.cxgbe.fw_install=2 will mostly do what was requested in the PR but it's a bit more intelligent in that it won't reinstall the same firmware repeatedly if the knob is left set. PR: kern/173584 MFC after: 5 days
2013-02-26 20:35:54 +00:00
"card has %d.%d.%d.%d, KLD has %d.%d.%d.%d\n",
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
t4_fw_install, state,
G_FW_HDR_FW_VER_MAJOR(d), G_FW_HDR_FW_VER_MINOR(d),
G_FW_HDR_FW_VER_MICRO(d), G_FW_HDR_FW_VER_BUILD(d),
cxgbe(4): Consider all the API versions of the interfaces exported by the firmware (instead of just the main firmware version) when evaluating firmware compatibility. Document the new "hw.cxgbe.fw_install" knob being introduced here. This should fix kern/173584 too. Setting hw.cxgbe.fw_install=2 will mostly do what was requested in the PR but it's a bit more intelligent in that it won't reinstall the same firmware repeatedly if the knob is left set. PR: kern/173584 MFC after: 5 days
2013-02-26 20:35:54 +00:00
G_FW_HDR_FW_VER_MAJOR(c), G_FW_HDR_FW_VER_MINOR(c),
G_FW_HDR_FW_VER_MICRO(c), G_FW_HDR_FW_VER_BUILD(c),
G_FW_HDR_FW_VER_MAJOR(k), G_FW_HDR_FW_VER_MINOR(k),
G_FW_HDR_FW_VER_MICRO(k), G_FW_HDR_FW_VER_BUILD(k));
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
rc = EINVAL;
cxgbe(4): Consider all the API versions of the interfaces exported by the firmware (instead of just the main firmware version) when evaluating firmware compatibility. Document the new "hw.cxgbe.fw_install" knob being introduced here. This should fix kern/173584 too. Setting hw.cxgbe.fw_install=2 will mostly do what was requested in the PR but it's a bit more intelligent in that it won't reinstall the same firmware repeatedly if the knob is left set. PR: kern/173584 MFC after: 5 days
2013-02-26 20:35:54 +00:00
goto done;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
cxgbe(4): Consider all the API versions of the interfaces exported by the firmware (instead of just the main firmware version) when evaluating firmware compatibility. Document the new "hw.cxgbe.fw_install" knob being introduced here. This should fix kern/173584 too. Setting hw.cxgbe.fw_install=2 will mostly do what was requested in the PR but it's a bit more intelligent in that it won't reinstall the same firmware repeatedly if the knob is left set. PR: kern/173584 MFC after: 5 days
2013-02-26 20:35:54 +00:00
/* We're using whatever's on the card and it's known to be good. */
sc->params.fw_vers = ntohl(card_fw->fw_ver);
snprintf(sc->fw_version, sizeof(sc->fw_version), "%u.%u.%u.%u",
G_FW_HDR_FW_VER_MAJOR(sc->params.fw_vers),
G_FW_HDR_FW_VER_MINOR(sc->params.fw_vers),
G_FW_HDR_FW_VER_MICRO(sc->params.fw_vers),
G_FW_HDR_FW_VER_BUILD(sc->params.fw_vers));
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/* Reset device */
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
if (need_fw_reset &&
(rc = -t4_fw_reset(sc, sc->mbox, F_PIORSTMODE | F_PIORST)) != 0) {
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
device_printf(sc->dev, "firmware reset failed: %d.\n", rc);
if (rc != ETIMEDOUT && rc != EIO)
t4_fw_bye(sc, sc->mbox);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
goto done;
}
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
sc->flags |= FW_OK;
rc = get_params__pre_init(sc);
if (rc != 0)
goto done; /* error message displayed already */
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/* Partition adapter resources as specified in the config file. */
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
if (state == DEV_STATE_UNINIT) {
KASSERT(sc->flags & MASTER_PF,
("%s: trying to change chip settings when not master.",
__func__));
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
rc = partition_resources(sc, default_cfg, fw_info->kld_name);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (rc != 0)
goto done; /* error message displayed already */
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
t4_tweak_chip_settings(sc);
/* get basic stuff going */
rc = -t4_fw_initialize(sc, sc->mbox);
if (rc != 0) {
device_printf(sc->dev, "fw init failed: %d.\n", rc);
goto done;
}
Force the 404-BT card (4 x 1G) to use the "uwire" configuration file. MFC after: 3 days
2013-01-26 03:10:28 +00:00
} else {
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
snprintf(sc->cfg_file, sizeof(sc->cfg_file), "pf%d", pf);
sc->cfcsum = 0;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
done:
cxgbe(4): Consider all the API versions of the interfaces exported by the firmware (instead of just the main firmware version) when evaluating firmware compatibility. Document the new "hw.cxgbe.fw_install" knob being introduced here. This should fix kern/173584 too. Setting hw.cxgbe.fw_install=2 will mostly do what was requested in the PR but it's a bit more intelligent in that it won't reinstall the same firmware repeatedly if the knob is left set. PR: kern/173584 MFC after: 5 days
2013-02-26 20:35:54 +00:00
free(card_fw, M_CXGBE);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (fw != NULL)
firmware_put(fw, FIRMWARE_UNLOAD);
if (default_cfg != NULL)
firmware_put(default_cfg, FIRMWARE_UNLOAD);
return (rc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
#define FW_PARAM_DEV(param) \
(V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | \
V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_##param))
#define FW_PARAM_PFVF(param) \
(V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_PFVF) | \
V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_PFVF_##param))
/*
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
* Partition chip resources for use between various PFs, VFs, etc.
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
*/
Firmware device log. # sysctl dev.t4nex.0.devlog MFC after: mdf's sysctl+sbuf changes are MFC'd
2011-05-31 23:49:13 +00:00
static int
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
partition_resources(struct adapter *sc, const struct firmware *default_cfg,
const char *name_prefix)
Firmware device log. # sysctl dev.t4nex.0.devlog MFC after: mdf's sysctl+sbuf changes are MFC'd
2011-05-31 23:49:13 +00:00
{
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
const struct firmware *cfg = NULL;
int rc = 0;
struct fw_caps_config_cmd caps;
uint32_t mtype, moff, finicsum, cfcsum;
Firmware device log. # sysctl dev.t4nex.0.devlog MFC after: mdf's sysctl+sbuf changes are MFC'd
2011-05-31 23:49:13 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
/*
* Figure out what configuration file to use. Pick the default config
* file for the card if the user hasn't specified one explicitly.
*/
snprintf(sc->cfg_file, sizeof(sc->cfg_file), "%s", t4_cfg_file);
if (strncmp(t4_cfg_file, DEFAULT_CF, sizeof(t4_cfg_file)) == 0) {
/* Card specific overrides go here. */
if (pci_get_device(sc->dev) == 0x440a)
snprintf(sc->cfg_file, sizeof(sc->cfg_file), UWIRE_CF);
- Explain clearly why a different firmware is being installed (if/when it is being installed). Improve other error messages while here. - Select special FPGA specific configuration profile when appropriate. MFC after: 3 days
2013-04-11 19:39:40 +00:00
if (is_fpga(sc))
snprintf(sc->cfg_file, sizeof(sc->cfg_file), FPGA_CF);
Firmware device log. # sysctl dev.t4nex.0.devlog MFC after: mdf's sysctl+sbuf changes are MFC'd
2011-05-31 23:49:13 +00:00
}
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
/*
* We need to load another module if the profile is anything except
* "default" or "flash".
*/
if (strncmp(sc->cfg_file, DEFAULT_CF, sizeof(sc->cfg_file)) != 0 &&
strncmp(sc->cfg_file, FLASH_CF, sizeof(sc->cfg_file)) != 0) {
char s[32];
snprintf(s, sizeof(s), "%s_%s", name_prefix, sc->cfg_file);
cfg = firmware_get(s);
if (cfg == NULL) {
if (default_cfg != NULL) {
- Explain clearly why a different firmware is being installed (if/when it is being installed). Improve other error messages while here. - Select special FPGA specific configuration profile when appropriate. MFC after: 3 days
2013-04-11 19:39:40 +00:00
device_printf(sc->dev,
"unable to load module \"%s\" for "
"configuration profile \"%s\", will use "
"the default config file instead.\n",
s, sc->cfg_file);
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
snprintf(sc->cfg_file, sizeof(sc->cfg_file),
"%s", DEFAULT_CF);
} else {
- Explain clearly why a different firmware is being installed (if/when it is being installed). Improve other error messages while here. - Select special FPGA specific configuration profile when appropriate. MFC after: 3 days
2013-04-11 19:39:40 +00:00
device_printf(sc->dev,
"unable to load module \"%s\" for "
"configuration profile \"%s\", will use "
"the config file on the card's flash "
"instead.\n", s, sc->cfg_file);
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
snprintf(sc->cfg_file, sizeof(sc->cfg_file),
"%s", FLASH_CF);
}
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
}
Firmware device log. # sysctl dev.t4nex.0.devlog MFC after: mdf's sysctl+sbuf changes are MFC'd
2011-05-31 23:49:13 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
if (strncmp(sc->cfg_file, DEFAULT_CF, sizeof(sc->cfg_file)) == 0 &&
default_cfg == NULL) {
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
device_printf(sc->dev,
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
"default config file not available, will use the config "
"file on the card's flash instead.\n");
snprintf(sc->cfg_file, sizeof(sc->cfg_file), "%s", FLASH_CF);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
if (strncmp(sc->cfg_file, FLASH_CF, sizeof(sc->cfg_file)) != 0) {
u_int cflen, i, n;
const uint32_t *cfdata;
uint32_t param, val, addr, off, mw_base, mw_aperture;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
KASSERT(cfg != NULL || default_cfg != NULL,
("%s: no config to upload", __func__));
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
/*
* Ask the firmware where it wants us to upload the config file.
*/
param = FW_PARAM_DEV(CF);
rc = -t4_query_params(sc, sc->mbox, sc->pf, 0, 1, &param, &val);
if (rc != 0) {
/* No support for config file? Shouldn't happen. */
device_printf(sc->dev,
"failed to query config file location: %d.\n", rc);
goto done;
}
mtype = G_FW_PARAMS_PARAM_Y(val);
moff = G_FW_PARAMS_PARAM_Z(val) << 16;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
/*
* XXX: sheer laziness. We deliberately added 4 bytes of
* useless stuffing/comments at the end of the config file so
* it's ok to simply throw away the last remaining bytes when
* the config file is not an exact multiple of 4. This also
* helps with the validate_mt_off_len check.
*/
if (cfg != NULL) {
cflen = cfg->datasize & ~3;
cfdata = cfg->data;
} else {
cflen = default_cfg->datasize & ~3;
cfdata = default_cfg->data;
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
if (cflen > FLASH_CFG_MAX_SIZE) {
device_printf(sc->dev,
"config file too long (%d, max allowed is %d). "
"Will try to use the config on the card, if any.\n",
cflen, FLASH_CFG_MAX_SIZE);
goto use_config_on_flash;
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
rc = validate_mt_off_len(sc, mtype, moff, cflen, &addr);
if (rc != 0) {
device_printf(sc->dev,
"%s: addr (%d/0x%x) or len %d is not valid: %d. "
"Will try to use the config on the card, if any.\n",
__func__, mtype, moff, cflen, rc);
goto use_config_on_flash;
}
memwin_info(sc, 2, &mw_base, &mw_aperture);
while (cflen) {
off = position_memwin(sc, 2, addr);
n = min(cflen, mw_aperture - off);
for (i = 0; i < n; i += 4)
t4_write_reg(sc, mw_base + off + i, *cfdata++);
cflen -= n;
addr += n;
}
} else {
use_config_on_flash:
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
mtype = FW_MEMTYPE_CF_FLASH;
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
moff = t4_flash_cfg_addr(sc);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
}
bzero(&caps, sizeof(caps));
caps.op_to_write = htobe32(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
F_FW_CMD_REQUEST | F_FW_CMD_READ);
caps.cfvalid_to_len16 = htobe32(F_FW_CAPS_CONFIG_CMD_CFVALID |
V_FW_CAPS_CONFIG_CMD_MEMTYPE_CF(mtype) |
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
V_FW_CAPS_CONFIG_CMD_MEMADDR64K_CF(moff >> 16) | FW_LEN16(caps));
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
rc = -t4_wr_mbox(sc, sc->mbox, &caps, sizeof(caps), &caps);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (rc != 0) {
device_printf(sc->dev,
- Explain clearly why a different firmware is being installed (if/when it is being installed). Improve other error messages while here. - Select special FPGA specific configuration profile when appropriate. MFC after: 3 days
2013-04-11 19:39:40 +00:00
"failed to pre-process config file: %d "
"(mtype %d, moff 0x%x).\n", rc, mtype, moff);
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
goto done;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
}
finicsum = be32toh(caps.finicsum);
cfcsum = be32toh(caps.cfcsum);
if (finicsum != cfcsum) {
device_printf(sc->dev,
"WARNING: config file checksum mismatch: %08x %08x\n",
finicsum, cfcsum);
}
sc->cfcsum = cfcsum;
#define LIMIT_CAPS(x) do { \
caps.x &= htobe16(t4_##x##_allowed); \
sc->x = htobe16(caps.x); \
} while (0)
/*
* Let the firmware know what features will (not) be used so it can tune
* things accordingly.
*/
LIMIT_CAPS(linkcaps);
LIMIT_CAPS(niccaps);
LIMIT_CAPS(toecaps);
LIMIT_CAPS(rdmacaps);
LIMIT_CAPS(iscsicaps);
LIMIT_CAPS(fcoecaps);
#undef LIMIT_CAPS
caps.op_to_write = htobe32(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
F_FW_CMD_REQUEST | F_FW_CMD_WRITE);
caps.cfvalid_to_len16 = htobe32(FW_LEN16(caps));
rc = -t4_wr_mbox(sc, sc->mbox, &caps, sizeof(caps), NULL);
if (rc != 0) {
device_printf(sc->dev,
"failed to process config file: %d.\n", rc);
}
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
done:
if (cfg != NULL)
firmware_put(cfg, FIRMWARE_UNLOAD);
return (rc);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
}
/*
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
* Retrieve parameters that are needed (or nice to have) very early.
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
*/
static int
get_params__pre_init(struct adapter *sc)
{
int rc;
uint32_t param[2], val[2];
struct fw_devlog_cmd cmd;
struct devlog_params *dlog = &sc->params.devlog;
param[0] = FW_PARAM_DEV(PORTVEC);
param[1] = FW_PARAM_DEV(CCLK);
rc = -t4_query_params(sc, sc->mbox, sc->pf, 0, 2, param, val);
if (rc != 0) {
device_printf(sc->dev,
"failed to query parameters (pre_init): %d.\n", rc);
return (rc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
sc->params.portvec = val[0];
Use native FreeBSD facilities everywhere except the shared code in common/ MFC after: 1 week
2012-09-13 09:10:10 +00:00
sc->params.nports = bitcount32(val[0]);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
sc->params.vpd.cclk = val[1];
/* Read device log parameters. */
bzero(&cmd, sizeof(cmd));
cmd.op_to_write = htobe32(V_FW_CMD_OP(FW_DEVLOG_CMD) |
F_FW_CMD_REQUEST | F_FW_CMD_READ);
cmd.retval_len16 = htobe32(FW_LEN16(cmd));
rc = -t4_wr_mbox(sc, sc->mbox, &cmd, sizeof(cmd), &cmd);
if (rc != 0) {
device_printf(sc->dev,
"failed to get devlog parameters: %d.\n", rc);
bzero(dlog, sizeof (*dlog));
rc = 0; /* devlog isn't critical for device operation */
} else {
val[0] = be32toh(cmd.memtype_devlog_memaddr16_devlog);
dlog->memtype = G_FW_DEVLOG_CMD_MEMTYPE_DEVLOG(val[0]);
dlog->start = G_FW_DEVLOG_CMD_MEMADDR16_DEVLOG(val[0]) << 4;
dlog->size = be32toh(cmd.memsize_devlog);
}
return (rc);
}
/*
* Retrieve various parameters that are of interest to the driver. The device
* has been initialized by the firmware at this point.
*/
static int
get_params__post_init(struct adapter *sc)
{
int rc;
uint32_t param[7], val[7];
struct fw_caps_config_cmd caps;
param[0] = FW_PARAM_PFVF(IQFLINT_START);
param[1] = FW_PARAM_PFVF(EQ_START);
param[2] = FW_PARAM_PFVF(FILTER_START);
param[3] = FW_PARAM_PFVF(FILTER_END);
cxgbe(4): Updates to the hardware L2 table management code. - Add full support for IPv6 addresses. - Read the size of the L2 table during attach. Do not assume that PCIe physical function 4 of the card has all of the table to itself. - Use FNV instead of Jenkins to hash L3 addresses and drop the private copy of jhash.h from the driver. MFC after: 1 week
2013-01-14 20:36:22 +00:00
param[4] = FW_PARAM_PFVF(L2T_START);
param[5] = FW_PARAM_PFVF(L2T_END);
rc = -t4_query_params(sc, sc->mbox, sc->pf, 0, 6, param, val);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (rc != 0) {
device_printf(sc->dev,
"failed to query parameters (post_init): %d.\n", rc);
return (rc);
}
sc->sge.iq_start = val[0];
sc->sge.eq_start = val[1];
sc->tids.ftid_base = val[2];
sc->tids.nftids = val[3] - val[2] + 1;
cxgbe(4): Updates to the hardware L2 table management code. - Add full support for IPv6 addresses. - Read the size of the L2 table during attach. Do not assume that PCIe physical function 4 of the card has all of the table to itself. - Use FNV instead of Jenkins to hash L3 addresses and drop the private copy of jhash.h from the driver. MFC after: 1 week
2013-01-14 20:36:22 +00:00
sc->vres.l2t.start = val[4];
sc->vres.l2t.size = val[5] - val[4] + 1;
KASSERT(sc->vres.l2t.size <= L2T_SIZE,
("%s: L2 table size (%u) larger than expected (%u)",
__func__, sc->vres.l2t.size, L2T_SIZE));
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/* get capabilites */
bzero(&caps, sizeof(caps));
caps.op_to_write = htobe32(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
F_FW_CMD_REQUEST | F_FW_CMD_READ);
caps.cfvalid_to_len16 = htobe32(FW_LEN16(caps));
rc = -t4_wr_mbox(sc, sc->mbox, &caps, sizeof(caps), &caps);
if (rc != 0) {
device_printf(sc->dev,
"failed to get card capabilities: %d.\n", rc);
return (rc);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (caps.toecaps) {
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/* query offload-related parameters */
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
param[0] = FW_PARAM_DEV(NTID);
param[1] = FW_PARAM_PFVF(SERVER_START);
param[2] = FW_PARAM_PFVF(SERVER_END);
param[3] = FW_PARAM_PFVF(TDDP_START);
param[4] = FW_PARAM_PFVF(TDDP_END);
param[5] = FW_PARAM_DEV(FLOWC_BUFFIFO_SZ);
rc = -t4_query_params(sc, sc->mbox, sc->pf, 0, 6, param, val);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (rc != 0) {
device_printf(sc->dev,
"failed to query TOE parameters: %d.\n", rc);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return (rc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
sc->tids.ntids = val[0];
sc->tids.natids = min(sc->tids.ntids / 2, MAX_ATIDS);
sc->tids.stid_base = val[1];
sc->tids.nstids = val[2] - val[1] + 1;
sc->vres.ddp.start = val[3];
sc->vres.ddp.size = val[4] - val[3] + 1;
sc->params.ofldq_wr_cred = val[5];
sc->params.offload = 1;
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (caps.rdmacaps) {
param[0] = FW_PARAM_PFVF(STAG_START);
param[1] = FW_PARAM_PFVF(STAG_END);
param[2] = FW_PARAM_PFVF(RQ_START);
param[3] = FW_PARAM_PFVF(RQ_END);
param[4] = FW_PARAM_PFVF(PBL_START);
param[5] = FW_PARAM_PFVF(PBL_END);
rc = -t4_query_params(sc, sc->mbox, sc->pf, 0, 6, param, val);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (rc != 0) {
device_printf(sc->dev,
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
"failed to query RDMA parameters(1): %d.\n", rc);
return (rc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
sc->vres.stag.start = val[0];
sc->vres.stag.size = val[1] - val[0] + 1;
sc->vres.rq.start = val[2];
sc->vres.rq.size = val[3] - val[2] + 1;
sc->vres.pbl.start = val[4];
sc->vres.pbl.size = val[5] - val[4] + 1;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
param[0] = FW_PARAM_PFVF(SQRQ_START);
param[1] = FW_PARAM_PFVF(SQRQ_END);
param[2] = FW_PARAM_PFVF(CQ_START);
param[3] = FW_PARAM_PFVF(CQ_END);
param[4] = FW_PARAM_PFVF(OCQ_START);
param[5] = FW_PARAM_PFVF(OCQ_END);
rc = -t4_query_params(sc, 0, 0, 0, 6, param, val);
if (rc != 0) {
device_printf(sc->dev,
"failed to query RDMA parameters(2): %d.\n", rc);
return (rc);
}
sc->vres.qp.start = val[0];
sc->vres.qp.size = val[1] - val[0] + 1;
sc->vres.cq.start = val[2];
sc->vres.cq.size = val[3] - val[2] + 1;
sc->vres.ocq.start = val[4];
sc->vres.ocq.size = val[5] - val[4] + 1;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (caps.iscsicaps) {
param[0] = FW_PARAM_PFVF(ISCSI_START);
param[1] = FW_PARAM_PFVF(ISCSI_END);
rc = -t4_query_params(sc, sc->mbox, sc->pf, 0, 2, param, val);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (rc != 0) {
device_printf(sc->dev,
"failed to query iSCSI parameters: %d.\n", rc);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return (rc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
sc->vres.iscsi.start = val[0];
sc->vres.iscsi.size = val[1] - val[0] + 1;
}
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
/*
* We've got the params we wanted to query via the firmware. Now grab
* some others directly from the chip.
*/
rc = t4_read_chip_settings(sc);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
return (rc);
}
cxgbe(4): Ask the card's firmware to pad up tiny CPLs by encapsulating them in a firmware message if it is able to do so. This works out better for one of the FIFOs in the chip. MFC after: 5 days
2013-02-26 00:27:27 +00:00
static int
set_params__post_init(struct adapter *sc)
{
uint32_t param, val;
There is no need for elaborate queries and error checking when trying to set FW4MSG_ENCAP. MFC after: 3 days
2013-04-11 21:15:35 +00:00
/* ask for encapsulated CPLs */
cxgbe(4): Ask the card's firmware to pad up tiny CPLs by encapsulating them in a firmware message if it is able to do so. This works out better for one of the FIFOs in the chip. MFC after: 5 days
2013-02-26 00:27:27 +00:00
param = FW_PARAM_PFVF(CPLFW4MSG_ENCAP);
There is no need for elaborate queries and error checking when trying to set FW4MSG_ENCAP. MFC after: 3 days
2013-04-11 21:15:35 +00:00
val = 1;
(void)t4_set_params(sc, sc->mbox, sc->pf, 0, 1, &param, &val);
cxgbe(4): Ask the card's firmware to pad up tiny CPLs by encapsulating them in a firmware message if it is able to do so. This works out better for one of the FIFOs in the chip. MFC after: 5 days
2013-02-26 00:27:27 +00:00
There is no need for elaborate queries and error checking when trying to set FW4MSG_ENCAP. MFC after: 3 days
2013-04-11 21:15:35 +00:00
return (0);
cxgbe(4): Ask the card's firmware to pad up tiny CPLs by encapsulating them in a firmware message if it is able to do so. This works out better for one of the FIFOs in the chip. MFC after: 5 days
2013-02-26 00:27:27 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
#undef FW_PARAM_PFVF
#undef FW_PARAM_DEV
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static void
t4_set_desc(struct adapter *sc)
{
char buf[128];
struct adapter_params *p = &sc->params;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
snprintf(buf, sizeof(buf), "Chelsio %s %sNIC (rev %d), S/N:%s, E/C:%s",
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
p->vpd.id, is_offload(sc) ? "R" : "", chip_rev(sc), p->vpd.sn,
p->vpd.ec);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
device_set_desc_copy(sc->dev, buf);
}
static void
build_medialist(struct port_info *pi)
{
struct ifmedia *media = &pi->media;
int data, m;
PORT_LOCK(pi);
ifmedia_removeall(media);
m = IFM_ETHER | IFM_FDX;
data = (pi->port_type << 8) | pi->mod_type;
switch(pi->port_type) {
case FW_PORT_TYPE_BT_XFI:
ifmedia_add(media, m | IFM_10G_T, data, NULL);
break;
case FW_PORT_TYPE_BT_XAUI:
ifmedia_add(media, m | IFM_10G_T, data, NULL);
/* fall through */
case FW_PORT_TYPE_BT_SGMII:
ifmedia_add(media, m | IFM_1000_T, data, NULL);
ifmedia_add(media, m | IFM_100_TX, data, NULL);
ifmedia_add(media, IFM_ETHER | IFM_AUTO, data, NULL);
ifmedia_set(media, IFM_ETHER | IFM_AUTO);
break;
case FW_PORT_TYPE_CX4:
ifmedia_add(media, m | IFM_10G_CX4, data, NULL);
ifmedia_set(media, m | IFM_10G_CX4);
break;
case FW_PORT_TYPE_SFP:
case FW_PORT_TYPE_FIBER_XFI:
case FW_PORT_TYPE_FIBER_XAUI:
switch (pi->mod_type) {
case FW_PORT_MOD_TYPE_LR:
ifmedia_add(media, m | IFM_10G_LR, data, NULL);
ifmedia_set(media, m | IFM_10G_LR);
break;
case FW_PORT_MOD_TYPE_SR:
ifmedia_add(media, m | IFM_10G_SR, data, NULL);
ifmedia_set(media, m | IFM_10G_SR);
break;
case FW_PORT_MOD_TYPE_LRM:
ifmedia_add(media, m | IFM_10G_LRM, data, NULL);
ifmedia_set(media, m | IFM_10G_LRM);
break;
case FW_PORT_MOD_TYPE_TWINAX_PASSIVE:
case FW_PORT_MOD_TYPE_TWINAX_ACTIVE:
ifmedia_add(media, m | IFM_10G_TWINAX, data, NULL);
ifmedia_set(media, m | IFM_10G_TWINAX);
break;
case FW_PORT_MOD_TYPE_NONE:
m &= ~IFM_FDX;
ifmedia_add(media, m | IFM_NONE, data, NULL);
ifmedia_set(media, m | IFM_NONE);
break;
case FW_PORT_MOD_TYPE_NA:
case FW_PORT_MOD_TYPE_ER:
default:
ifmedia_add(media, m | IFM_UNKNOWN, data, NULL);
ifmedia_set(media, m | IFM_UNKNOWN);
break;
}
break;
case FW_PORT_TYPE_KX4:
case FW_PORT_TYPE_KX:
case FW_PORT_TYPE_KR:
default:
ifmedia_add(media, m | IFM_UNKNOWN, data, NULL);
ifmedia_set(media, m | IFM_UNKNOWN);
break;
}
PORT_UNLOCK(pi);
}
Program the MAC exact match table in batches of 7 addresses at a time when possible. This is more efficient than one at a time. Submitted by: gnn MFC after: 3 days
2012-02-08 00:36:36 +00:00
#define FW_MAC_EXACT_CHUNK 7
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/*
* Program the port's XGMAC based on parameters in ifnet. The caller also
* indicates which parameters should be programmed (the rest are left alone).
*/
static int
update_mac_settings(struct port_info *pi, int flags)
{
int rc;
struct ifnet *ifp = pi->ifp;
struct adapter *sc = pi->adapter;
int mtu = -1, promisc = -1, allmulti = -1, vlanex = -1;
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
ASSERT_SYNCHRONIZED_OP(sc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
KASSERT(flags, ("%s: not told what to update.", __func__));
if (flags & XGMAC_MTU)
mtu = ifp->if_mtu;
if (flags & XGMAC_PROMISC)
promisc = ifp->if_flags & IFF_PROMISC ? 1 : 0;
if (flags & XGMAC_ALLMULTI)
allmulti = ifp->if_flags & IFF_ALLMULTI ? 1 : 0;
if (flags & XGMAC_VLANEX)
vlanex = ifp->if_capenable & IFCAP_VLAN_HWTAGGING ? 1 : 0;
rc = -t4_set_rxmode(sc, sc->mbox, pi->viid, mtu, promisc, allmulti, 1,
vlanex, false);
if (rc) {
if_printf(ifp, "set_rxmode (%x) failed: %d\n", flags, rc);
return (rc);
}
if (flags & XGMAC_UCADDR) {
uint8_t ucaddr[ETHER_ADDR_LEN];
bcopy(IF_LLADDR(ifp), ucaddr, sizeof(ucaddr));
rc = t4_change_mac(sc, sc->mbox, pi->viid, pi->xact_addr_filt,
ucaddr, true, true);
if (rc < 0) {
rc = -rc;
if_printf(ifp, "change_mac failed: %d\n", rc);
return (rc);
} else {
pi->xact_addr_filt = rc;
rc = 0;
}
}
if (flags & XGMAC_MCADDRS) {
Program the MAC exact match table in batches of 7 addresses at a time when possible. This is more efficient than one at a time. Submitted by: gnn MFC after: 3 days
2012-02-08 00:36:36 +00:00
const uint8_t *mcaddr[FW_MAC_EXACT_CHUNK];
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
int del = 1;
uint64_t hash = 0;
struct ifmultiaddr *ifma;
Program the MAC exact match table in batches of 7 addresses at a time when possible. This is more efficient than one at a time. Submitted by: gnn MFC after: 3 days
2012-02-08 00:36:36 +00:00
int i = 0, j;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if_maddr_rlock(ifp);
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
Fix inverted test that resulted in incorrect multicast hw programming.
2012-07-03 06:56:11 +00:00
if (ifma->ifma_addr->sa_family != AF_LINK)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
continue;
Program the MAC exact match table in batches of 7 addresses at a time when possible. This is more efficient than one at a time. Submitted by: gnn MFC after: 3 days
2012-02-08 00:36:36 +00:00
mcaddr[i++] =
LLADDR((struct sockaddr_dl *)ifma->ifma_addr);
if (i == FW_MAC_EXACT_CHUNK) {
rc = t4_alloc_mac_filt(sc, sc->mbox, pi->viid,
del, i, mcaddr, NULL, &hash, 0);
if (rc < 0) {
rc = -rc;
for (j = 0; j < i; j++) {
if_printf(ifp,
"failed to add mc address"
" %02x:%02x:%02x:"
"%02x:%02x:%02x rc=%d\n",
mcaddr[j][0], mcaddr[j][1],
mcaddr[j][2], mcaddr[j][3],
mcaddr[j][4], mcaddr[j][5],
rc);
}
goto mcfail;
}
del = 0;
i = 0;
}
}
if (i > 0) {
rc = t4_alloc_mac_filt(sc, sc->mbox, pi->viid,
del, i, mcaddr, NULL, &hash, 0);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (rc < 0) {
rc = -rc;
Program the MAC exact match table in batches of 7 addresses at a time when possible. This is more efficient than one at a time. Submitted by: gnn MFC after: 3 days
2012-02-08 00:36:36 +00:00
for (j = 0; j < i; j++) {
if_printf(ifp,
"failed to add mc address"
" %02x:%02x:%02x:"
"%02x:%02x:%02x rc=%d\n",
mcaddr[j][0], mcaddr[j][1],
mcaddr[j][2], mcaddr[j][3],
mcaddr[j][4], mcaddr[j][5],
rc);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
goto mcfail;
}
}
rc = -t4_set_addr_hash(sc, sc->mbox, pi->viid, 0, hash, 0);
if (rc != 0)
if_printf(ifp, "failed to set mc address hash: %d", rc);
mcfail:
if_maddr_runlock(ifp);
}
return (rc);
}
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
int
begin_synchronized_op(struct adapter *sc, struct port_info *pi, int flags,
char *wmesg)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
int rc, pri;
#ifdef WITNESS
/* the caller thinks it's ok to sleep, but is it really? */
if (flags & SLEEP_OK)
pause("t4slptst", 1);
#endif
if (INTR_OK)
pri = PCATCH;
else
pri = 0;
ADAPTER_LOCK(sc);
for (;;) {
if (pi && IS_DOOMED(pi)) {
rc = ENXIO;
goto done;
}
if (!IS_BUSY(sc)) {
rc = 0;
break;
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
if (!(flags & SLEEP_OK)) {
rc = EBUSY;
goto done;
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
if (mtx_sleep(&sc->flags, &sc->sc_lock, pri, wmesg, 0)) {
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
rc = EINTR;
goto done;
}
}
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
KASSERT(!IS_BUSY(sc), ("%s: controller busy.", __func__));
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
SET_BUSY(sc);
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
#ifdef INVARIANTS
sc->last_op = wmesg;
sc->last_op_thr = curthread;
#endif
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
done:
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
if (!(flags & HOLD_LOCK) || rc)
ADAPTER_UNLOCK(sc);
return (rc);
}
void
end_synchronized_op(struct adapter *sc, int flags)
{
if (flags & LOCK_HELD)
ADAPTER_LOCK_ASSERT_OWNED(sc);
else
ADAPTER_LOCK(sc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
KASSERT(IS_BUSY(sc), ("%s: controller not busy.", __func__));
CLR_BUSY(sc);
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
wakeup(&sc->flags);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
ADAPTER_UNLOCK(sc);
}
static int
cxgbe_init_synchronized(struct port_info *pi)
{
struct adapter *sc = pi->adapter;
struct ifnet *ifp = pi->ifp;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
int rc = 0;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
ASSERT_SYNCHRONIZED_OP(sc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (isset(&sc->open_device_map, pi->port_id)) {
KASSERT(ifp->if_drv_flags & IFF_DRV_RUNNING,
("mismatch between open_device_map and if_drv_flags"));
return (0); /* already running */
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (!(sc->flags & FULL_INIT_DONE) &&
((rc = adapter_full_init(sc)) != 0))
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
return (rc); /* error message displayed already */
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (!(pi->flags & PORT_INIT_DONE) &&
((rc = port_full_init(pi)) != 0))
return (rc); /* error message displayed already */
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
rc = update_mac_settings(pi, XGMAC_ALL);
if (rc)
goto done; /* error message displayed already */
rc = -t4_link_start(sc, sc->mbox, pi->tx_chan, &pi->link_cfg);
if (rc != 0) {
if_printf(ifp, "start_link failed: %d\n", rc);
goto done;
}
rc = -t4_enable_vi(sc, sc->mbox, pi->viid, true, true);
if (rc != 0) {
if_printf(ifp, "enable_vi failed: %d\n", rc);
goto done;
}
/* all ok */
setbit(&sc->open_device_map, pi->port_id);
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
PORT_LOCK(pi);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
ifp->if_drv_flags |= IFF_DRV_RUNNING;
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
PORT_UNLOCK(pi);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
callout_reset(&pi->tick, hz, cxgbe_tick, pi);
done:
if (rc != 0)
cxgbe_uninit_synchronized(pi);
return (rc);
}
/*
* Idempotent.
*/
static int
cxgbe_uninit_synchronized(struct port_info *pi)
{
struct adapter *sc = pi->adapter;
struct ifnet *ifp = pi->ifp;
int rc;
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
ASSERT_SYNCHRONIZED_OP(sc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/*
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
* Disable the VI so that all its data in either direction is discarded
* by the MPS. Leave everything else (the queues, interrupts, and 1Hz
* tick) intact as the TP can deliver negative advice or data that it's
* holding in its RAM (for an offloaded connection) even after the VI is
* disabled.
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
*/
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
rc = -t4_enable_vi(sc, sc->mbox, pi->viid, false, false);
if (rc) {
if_printf(ifp, "disable_vi failed: %d\n", rc);
return (rc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
clrbit(&sc->open_device_map, pi->port_id);
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
PORT_LOCK(pi);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
PORT_UNLOCK(pi);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
pi->link_cfg.link_ok = 0;
pi->link_cfg.speed = 0;
t4_os_link_changed(sc, pi->port_id, 0);
return (0);
}
Install interrupt handlers early, during attach, for the reason explained in r239913 by jhb. MFC after: 1 week
2012-09-13 09:18:13 +00:00
/*
* It is ok for this function to fail midway and return right away. t4_detach
* will walk the entire sc->irq list and clean up whatever is valid.
*/
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static int
Install interrupt handlers early, during attach, for the reason explained in r239913 by jhb. MFC after: 1 week
2012-09-13 09:18:13 +00:00
setup_intr_handlers(struct adapter *sc)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
Install interrupt handlers early, during attach, for the reason explained in r239913 by jhb. MFC after: 1 week
2012-09-13 09:18:13 +00:00
int rc, rid, p, q;
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
char s[8];
struct irq *irq;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct port_info *pi;
struct sge_rxq *rxq;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct sge_ofld_rxq *ofld_rxq;
#endif
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/*
* Setup interrupts.
*/
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
irq = &sc->irq[0];
rid = sc->intr_type == INTR_INTX ? 0 : 1;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (sc->intr_count == 1) {
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
KASSERT(!(sc->flags & INTR_DIRECT),
("%s: single interrupt && INTR_DIRECT?", __func__));
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
Install interrupt handlers early, during attach, for the reason explained in r239913 by jhb. MFC after: 1 week
2012-09-13 09:18:13 +00:00
rc = t4_alloc_irq(sc, irq, rid, t4_intr_all, sc, "all");
if (rc != 0)
return (rc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
} else {
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/* Multiple interrupts. */
KASSERT(sc->intr_count >= T4_EXTRA_INTR + sc->params.nports,
("%s: too few intr.", __func__));
/* The first one is always error intr */
Install interrupt handlers early, during attach, for the reason explained in r239913 by jhb. MFC after: 1 week
2012-09-13 09:18:13 +00:00
rc = t4_alloc_irq(sc, irq, rid, t4_intr_err, sc, "err");
if (rc != 0)
return (rc);
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
irq++;
rid++;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/* The second one is always the firmware event queue */
Install interrupt handlers early, during attach, for the reason explained in r239913 by jhb. MFC after: 1 week
2012-09-13 09:18:13 +00:00
rc = t4_alloc_irq(sc, irq, rid, t4_intr_evt, &sc->sge.fwq,
"evt");
if (rc != 0)
return (rc);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
irq++;
rid++;
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/*
* Note that if INTR_DIRECT is not set then either the NIC rx
* queues or (exclusive or) the TOE rx queueus will be taking
* direct interrupts.
*
* There is no need to check for is_offload(sc) as nofldrxq
* will be 0 if offload is disabled.
*/
for_each_port(sc, p) {
pi = sc->port[p];
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/*
* Skip over the NIC queues if they aren't taking direct
* interrupts.
*/
if (!(sc->flags & INTR_DIRECT) &&
pi->nofldrxq > pi->nrxq)
goto ofld_queues;
#endif
rxq = &sc->sge.rxq[pi->first_rxq];
for (q = 0; q < pi->nrxq; q++, rxq++) {
snprintf(s, sizeof(s), "%d.%d", p, q);
Install interrupt handlers early, during attach, for the reason explained in r239913 by jhb. MFC after: 1 week
2012-09-13 09:18:13 +00:00
rc = t4_alloc_irq(sc, irq, rid, t4_intr, rxq,
s);
if (rc != 0)
return (rc);
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
irq++;
rid++;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/*
* Skip over the offload queues if they aren't taking
* direct interrupts.
*/
if (!(sc->flags & INTR_DIRECT))
continue;
ofld_queues:
ofld_rxq = &sc->sge.ofld_rxq[pi->first_ofld_rxq];
for (q = 0; q < pi->nofldrxq; q++, ofld_rxq++) {
snprintf(s, sizeof(s), "%d,%d", p, q);
Install interrupt handlers early, during attach, for the reason explained in r239913 by jhb. MFC after: 1 week
2012-09-13 09:18:13 +00:00
rc = t4_alloc_irq(sc, irq, rid, t4_intr,
ofld_rxq, s);
if (rc != 0)
return (rc);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
irq++;
rid++;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
#endif
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
}
Install interrupt handlers early, during attach, for the reason explained in r239913 by jhb. MFC after: 1 week
2012-09-13 09:18:13 +00:00
return (0);
}
static int
adapter_full_init(struct adapter *sc)
{
int rc, i;
ADAPTER_LOCK_ASSERT_NOTOWNED(sc);
KASSERT((sc->flags & FULL_INIT_DONE) == 0,
("%s: FULL_INIT_DONE already", __func__));
/*
* queues that belong to the adapter (not any particular port).
*/
rc = t4_setup_adapter_queues(sc);
if (rc != 0)
goto done;
for (i = 0; i < nitems(sc->tq); i++) {
sc->tq[i] = taskqueue_create("t4 taskq", M_NOWAIT,
taskqueue_thread_enqueue, &sc->tq[i]);
if (sc->tq[i] == NULL) {
device_printf(sc->dev,
"failed to allocate task queue %d\n", i);
rc = ENOMEM;
goto done;
}
taskqueue_start_threads(&sc->tq[i], 1, PI_NET, "%s tq%d",
device_get_nameunit(sc->dev), i);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
t4_intr_enable(sc);
sc->flags |= FULL_INIT_DONE;
done:
if (rc != 0)
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
adapter_full_uninit(sc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
return (rc);
}
static int
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
adapter_full_uninit(struct adapter *sc)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
int i;
ADAPTER_LOCK_ASSERT_NOTOWNED(sc);
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
t4_teardown_adapter_queues(sc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Use native FreeBSD facilities everywhere except the shared code in common/ MFC after: 1 week
2012-09-13 09:10:10 +00:00
for (i = 0; i < nitems(sc->tq) && sc->tq[i]; i++) {
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
taskqueue_free(sc->tq[i]);
sc->tq[i] = NULL;
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
sc->flags &= ~FULL_INIT_DONE;
return (0);
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int
port_full_init(struct port_info *pi)
{
struct adapter *sc = pi->adapter;
struct ifnet *ifp = pi->ifp;
uint16_t *rss;
struct sge_rxq *rxq;
int rc, i;
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
ASSERT_SYNCHRONIZED_OP(sc);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
KASSERT((pi->flags & PORT_INIT_DONE) == 0,
("%s: PORT_INIT_DONE already", __func__));
sysctl_ctx_init(&pi->ctx);
pi->flags |= PORT_SYSCTL_CTX;
/*
* Allocate tx/rx/fl queues for this port.
*/
rc = t4_setup_port_queues(pi);
if (rc != 0)
goto done; /* error message displayed already */
/*
* Setup RSS for this port.
*/
rss = malloc(pi->nrxq * sizeof (*rss), M_CXGBE,
M_ZERO | M_WAITOK);
for_each_rxq(pi, i, rxq) {
rss[i] = rxq->iq.abs_id;
}
rc = -t4_config_rss_range(sc, sc->mbox, pi->viid, 0,
pi->rss_size, rss, pi->nrxq);
free(rss, M_CXGBE);
if (rc != 0) {
if_printf(ifp, "rss_config failed: %d\n", rc);
goto done;
}
pi->flags |= PORT_INIT_DONE;
done:
if (rc != 0)
port_full_uninit(pi);
return (rc);
}
/*
* Idempotent.
*/
static int
port_full_uninit(struct port_info *pi)
{
struct adapter *sc = pi->adapter;
int i;
struct sge_rxq *rxq;
struct sge_txq *txq;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct sge_ofld_rxq *ofld_rxq;
struct sge_wrq *ofld_txq;
#endif
if (pi->flags & PORT_INIT_DONE) {
/* Need to quiesce queues. XXX: ctrl queues? */
for_each_txq(pi, i, txq) {
quiesce_eq(sc, &txq->eq);
}
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
for_each_ofld_txq(pi, i, ofld_txq) {
quiesce_eq(sc, &ofld_txq->eq);
}
#endif
for_each_rxq(pi, i, rxq) {
quiesce_iq(sc, &rxq->iq);
quiesce_fl(sc, &rxq->fl);
}
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
for_each_ofld_rxq(pi, i, ofld_rxq) {
quiesce_iq(sc, &ofld_rxq->iq);
quiesce_fl(sc, &ofld_rxq->fl);
}
#endif
}
t4_teardown_port_queues(pi);
pi->flags &= ~PORT_INIT_DONE;
return (0);
}
static void
quiesce_eq(struct adapter *sc, struct sge_eq *eq)
{
EQ_LOCK(eq);
eq->flags |= EQ_DOOMED;
/*
* Wait for the response to a credit flush if one's
* pending.
*/
while (eq->flags & EQ_CRFLUSHED)
mtx_sleep(eq, &eq->eq_lock, 0, "crflush", 0);
EQ_UNLOCK(eq);
callout_drain(&eq->tx_callout); /* XXX: iffy */
pause("callout", 10); /* Still iffy */
taskqueue_drain(sc->tq[eq->tx_chan], &eq->tx_task);
}
static void
quiesce_iq(struct adapter *sc, struct sge_iq *iq)
{
(void) sc; /* unused */
/* Synchronize with the interrupt handler */
while (!atomic_cmpset_int(&iq->state, IQS_IDLE, IQS_DISABLED))
pause("iqfree", 1);
}
static void
quiesce_fl(struct adapter *sc, struct sge_fl *fl)
{
mtx_lock(&sc->sfl_lock);
FL_LOCK(fl);
fl->flags |= FL_DOOMED;
FL_UNLOCK(fl);
mtx_unlock(&sc->sfl_lock);
callout_drain(&sc->sfl_callout);
KASSERT((fl->flags & FL_STARVING) == 0,
("%s: still starving", __func__));
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static int
t4_alloc_irq(struct adapter *sc, struct irq *irq, int rid,
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
driver_intr_t *handler, void *arg, char *name)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
int rc;
irq->rid = rid;
irq->res = bus_alloc_resource_any(sc->dev, SYS_RES_IRQ, &irq->rid,
RF_SHAREABLE | RF_ACTIVE);
if (irq->res == NULL) {
device_printf(sc->dev,
"failed to allocate IRQ for rid %d, name %s.\n", rid, name);
return (ENOMEM);
}
rc = bus_setup_intr(sc->dev, irq->res, INTR_MPSAFE | INTR_TYPE_NET,
NULL, handler, arg, &irq->tag);
if (rc != 0) {
device_printf(sc->dev,
"failed to setup interrupt for rid %d, name %s: %d\n",
rid, name, rc);
} else if (name)
bus_describe_intr(sc->dev, irq->res, irq->tag, name);
return (rc);
}
static int
t4_free_irq(struct adapter *sc, struct irq *irq)
{
if (irq->tag)
bus_teardown_intr(sc->dev, irq->res, irq->tag);
if (irq->res)
bus_release_resource(sc->dev, SYS_RES_IRQ, irq->rid, irq->res);
bzero(irq, sizeof(*irq));
return (0);
}
static void
reg_block_dump(struct adapter *sc, uint8_t *buf, unsigned int start,
unsigned int end)
{
uint32_t *p = (uint32_t *)(buf + start);
for ( ; start <= end; start += sizeof(uint32_t))
*p++ = t4_read_reg(sc, start);
}
static void
t4_get_regs(struct adapter *sc, struct t4_regdump *regs, uint8_t *buf)
{
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
int i, n;
const unsigned int *reg_ranges;
static const unsigned int t4_reg_ranges[] = {
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
0x1008, 0x1108,
0x1180, 0x11b4,
0x11fc, 0x123c,
0x1300, 0x173c,
0x1800, 0x18fc,
0x3000, 0x30d8,
0x30e0, 0x5924,
0x5960, 0x59d4,
0x5a00, 0x5af8,
0x6000, 0x6098,
0x6100, 0x6150,
0x6200, 0x6208,
0x6240, 0x6248,
0x6280, 0x6338,
0x6370, 0x638c,
0x6400, 0x643c,
0x6500, 0x6524,
0x6a00, 0x6a38,
0x6a60, 0x6a78,
0x6b00, 0x6b84,
0x6bf0, 0x6c84,
0x6cf0, 0x6d84,
0x6df0, 0x6e84,
0x6ef0, 0x6f84,
0x6ff0, 0x7084,
0x70f0, 0x7184,
0x71f0, 0x7284,
0x72f0, 0x7384,
0x73f0, 0x7450,
0x7500, 0x7530,
0x7600, 0x761c,
0x7680, 0x76cc,
0x7700, 0x7798,
0x77c0, 0x77fc,
0x7900, 0x79fc,
0x7b00, 0x7c38,
0x7d00, 0x7efc,
0x8dc0, 0x8e1c,
0x8e30, 0x8e78,
0x8ea0, 0x8f6c,
0x8fc0, 0x9074,
0x90fc, 0x90fc,
0x9400, 0x9458,
0x9600, 0x96bc,
0x9800, 0x9808,
0x9820, 0x983c,
0x9850, 0x9864,
0x9c00, 0x9c6c,
0x9c80, 0x9cec,
0x9d00, 0x9d6c,
0x9d80, 0x9dec,
0x9e00, 0x9e6c,
0x9e80, 0x9eec,
0x9f00, 0x9f6c,
0x9f80, 0x9fec,
0xd004, 0xd03c,
0xdfc0, 0xdfe0,
0xe000, 0xea7c,
0xf000, 0x11190,
Do not read registers with read side effects while performing a register dump for cxgbetool.
2012-06-22 08:37:33 +00:00
0x19040, 0x1906c,
0x19078, 0x19080,
0x1908c, 0x19124,
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
0x19150, 0x191b0,
0x191d0, 0x191e8,
0x19238, 0x1924c,
0x193f8, 0x19474,
0x19490, 0x194f8,
0x19800, 0x19f30,
0x1a000, 0x1a06c,
0x1a0b0, 0x1a120,
0x1a128, 0x1a138,
0x1a190, 0x1a1c4,
0x1a1fc, 0x1a1fc,
0x1e040, 0x1e04c,
Do not read registers with read side effects while performing a register dump for cxgbetool.
2012-06-22 08:37:33 +00:00
0x1e284, 0x1e28c,
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
0x1e2c0, 0x1e2c0,
0x1e2e0, 0x1e2e0,
0x1e300, 0x1e384,
0x1e3c0, 0x1e3c8,
0x1e440, 0x1e44c,
Do not read registers with read side effects while performing a register dump for cxgbetool.
2012-06-22 08:37:33 +00:00
0x1e684, 0x1e68c,
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
0x1e6c0, 0x1e6c0,
0x1e6e0, 0x1e6e0,
0x1e700, 0x1e784,
0x1e7c0, 0x1e7c8,
0x1e840, 0x1e84c,
Do not read registers with read side effects while performing a register dump for cxgbetool.
2012-06-22 08:37:33 +00:00
0x1ea84, 0x1ea8c,
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
0x1eac0, 0x1eac0,
0x1eae0, 0x1eae0,
0x1eb00, 0x1eb84,
0x1ebc0, 0x1ebc8,
0x1ec40, 0x1ec4c,
Do not read registers with read side effects while performing a register dump for cxgbetool.
2012-06-22 08:37:33 +00:00
0x1ee84, 0x1ee8c,
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
0x1eec0, 0x1eec0,
0x1eee0, 0x1eee0,
0x1ef00, 0x1ef84,
0x1efc0, 0x1efc8,
0x1f040, 0x1f04c,
Do not read registers with read side effects while performing a register dump for cxgbetool.
2012-06-22 08:37:33 +00:00
0x1f284, 0x1f28c,
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
0x1f2c0, 0x1f2c0,
0x1f2e0, 0x1f2e0,
0x1f300, 0x1f384,
0x1f3c0, 0x1f3c8,
0x1f440, 0x1f44c,
Do not read registers with read side effects while performing a register dump for cxgbetool.
2012-06-22 08:37:33 +00:00
0x1f684, 0x1f68c,
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
0x1f6c0, 0x1f6c0,
0x1f6e0, 0x1f6e0,
0x1f700, 0x1f784,
0x1f7c0, 0x1f7c8,
0x1f840, 0x1f84c,
Do not read registers with read side effects while performing a register dump for cxgbetool.
2012-06-22 08:37:33 +00:00
0x1fa84, 0x1fa8c,
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
0x1fac0, 0x1fac0,
0x1fae0, 0x1fae0,
0x1fb00, 0x1fb84,
0x1fbc0, 0x1fbc8,
0x1fc40, 0x1fc4c,
Do not read registers with read side effects while performing a register dump for cxgbetool.
2012-06-22 08:37:33 +00:00
0x1fe84, 0x1fe8c,
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
0x1fec0, 0x1fec0,
0x1fee0, 0x1fee0,
0x1ff00, 0x1ff84,
0x1ffc0, 0x1ffc8,
0x20000, 0x2002c,
0x20100, 0x2013c,
0x20190, 0x201c8,
0x20200, 0x20318,
0x20400, 0x20528,
0x20540, 0x20614,
0x21000, 0x21040,
0x2104c, 0x21060,
0x210c0, 0x210ec,
0x21200, 0x21268,
0x21270, 0x21284,
0x212fc, 0x21388,
0x21400, 0x21404,
0x21500, 0x21518,
0x2152c, 0x2153c,
0x21550, 0x21554,
0x21600, 0x21600,
0x21608, 0x21628,
0x21630, 0x2163c,
0x21700, 0x2171c,
0x21780, 0x2178c,
0x21800, 0x21c38,
0x21c80, 0x21d7c,
0x21e00, 0x21e04,
0x22000, 0x2202c,
0x22100, 0x2213c,
0x22190, 0x221c8,
0x22200, 0x22318,
0x22400, 0x22528,
0x22540, 0x22614,
0x23000, 0x23040,
0x2304c, 0x23060,
0x230c0, 0x230ec,
0x23200, 0x23268,
0x23270, 0x23284,
0x232fc, 0x23388,
0x23400, 0x23404,
0x23500, 0x23518,
0x2352c, 0x2353c,
0x23550, 0x23554,
0x23600, 0x23600,
0x23608, 0x23628,
0x23630, 0x2363c,
0x23700, 0x2371c,
0x23780, 0x2378c,
0x23800, 0x23c38,
0x23c80, 0x23d7c,
0x23e00, 0x23e04,
0x24000, 0x2402c,
0x24100, 0x2413c,
0x24190, 0x241c8,
0x24200, 0x24318,
0x24400, 0x24528,
0x24540, 0x24614,
0x25000, 0x25040,
0x2504c, 0x25060,
0x250c0, 0x250ec,
0x25200, 0x25268,
0x25270, 0x25284,
0x252fc, 0x25388,
0x25400, 0x25404,
0x25500, 0x25518,
0x2552c, 0x2553c,
0x25550, 0x25554,
0x25600, 0x25600,
0x25608, 0x25628,
0x25630, 0x2563c,
0x25700, 0x2571c,
0x25780, 0x2578c,
0x25800, 0x25c38,
0x25c80, 0x25d7c,
0x25e00, 0x25e04,
0x26000, 0x2602c,
0x26100, 0x2613c,
0x26190, 0x261c8,
0x26200, 0x26318,
0x26400, 0x26528,
0x26540, 0x26614,
0x27000, 0x27040,
0x2704c, 0x27060,
0x270c0, 0x270ec,
0x27200, 0x27268,
0x27270, 0x27284,
0x272fc, 0x27388,
0x27400, 0x27404,
0x27500, 0x27518,
0x2752c, 0x2753c,
0x27550, 0x27554,
0x27600, 0x27600,
0x27608, 0x27628,
0x27630, 0x2763c,
0x27700, 0x2771c,
0x27780, 0x2778c,
0x27800, 0x27c38,
0x27c80, 0x27d7c,
0x27e00, 0x27e04
};
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
static const unsigned int t5_reg_ranges[] = {
0x1008, 0x1148,
0x1180, 0x11b4,
0x11fc, 0x123c,
0x1280, 0x173c,
0x1800, 0x18fc,
0x3000, 0x3028,
0x3060, 0x30d8,
0x30e0, 0x30fc,
0x3140, 0x357c,
0x35a8, 0x35cc,
0x35ec, 0x35ec,
0x3600, 0x5624,
0x56cc, 0x575c,
0x580c, 0x5814,
0x5890, 0x58bc,
0x5940, 0x59dc,
0x59fc, 0x5a18,
0x5a60, 0x5a9c,
0x5b94, 0x5bfc,
0x6000, 0x6040,
0x6058, 0x614c,
0x7700, 0x7798,
0x77c0, 0x78fc,
0x7b00, 0x7c54,
0x7d00, 0x7efc,
0x8dc0, 0x8de0,
0x8df8, 0x8e84,
0x8ea0, 0x8f84,
0x8fc0, 0x90f8,
0x9400, 0x9470,
0x9600, 0x96f4,
0x9800, 0x9808,
0x9820, 0x983c,
0x9850, 0x9864,
0x9c00, 0x9c6c,
0x9c80, 0x9cec,
0x9d00, 0x9d6c,
0x9d80, 0x9dec,
0x9e00, 0x9e6c,
0x9e80, 0x9eec,
0x9f00, 0x9f6c,
0x9f80, 0xa020,
0xd004, 0xd03c,
0xdfc0, 0xdfe0,
0xe000, 0x11088,
0x1109c, 0x1117c,
0x11190, 0x11204,
0x19040, 0x1906c,
0x19078, 0x19080,
0x1908c, 0x19124,
0x19150, 0x191b0,
0x191d0, 0x191e8,
0x19238, 0x19290,
0x193f8, 0x19474,
0x19490, 0x194cc,
0x194f0, 0x194f8,
0x19c00, 0x19c60,
0x19c94, 0x19e10,
0x19e50, 0x19f34,
0x19f40, 0x19f50,
0x19f90, 0x19fe4,
0x1a000, 0x1a06c,
0x1a0b0, 0x1a120,
0x1a128, 0x1a138,
0x1a190, 0x1a1c4,
0x1a1fc, 0x1a1fc,
0x1e008, 0x1e00c,
0x1e040, 0x1e04c,
0x1e284, 0x1e290,
0x1e2c0, 0x1e2c0,
0x1e2e0, 0x1e2e0,
0x1e300, 0x1e384,
0x1e3c0, 0x1e3c8,
0x1e408, 0x1e40c,
0x1e440, 0x1e44c,
0x1e684, 0x1e690,
0x1e6c0, 0x1e6c0,
0x1e6e0, 0x1e6e0,
0x1e700, 0x1e784,
0x1e7c0, 0x1e7c8,
0x1e808, 0x1e80c,
0x1e840, 0x1e84c,
0x1ea84, 0x1ea90,
0x1eac0, 0x1eac0,
0x1eae0, 0x1eae0,
0x1eb00, 0x1eb84,
0x1ebc0, 0x1ebc8,
0x1ec08, 0x1ec0c,
0x1ec40, 0x1ec4c,
0x1ee84, 0x1ee90,
0x1eec0, 0x1eec0,
0x1eee0, 0x1eee0,
0x1ef00, 0x1ef84,
0x1efc0, 0x1efc8,
0x1f008, 0x1f00c,
0x1f040, 0x1f04c,
0x1f284, 0x1f290,
0x1f2c0, 0x1f2c0,
0x1f2e0, 0x1f2e0,
0x1f300, 0x1f384,
0x1f3c0, 0x1f3c8,
0x1f408, 0x1f40c,
0x1f440, 0x1f44c,
0x1f684, 0x1f690,
0x1f6c0, 0x1f6c0,
0x1f6e0, 0x1f6e0,
0x1f700, 0x1f784,
0x1f7c0, 0x1f7c8,
0x1f808, 0x1f80c,
0x1f840, 0x1f84c,
0x1fa84, 0x1fa90,
0x1fac0, 0x1fac0,
0x1fae0, 0x1fae0,
0x1fb00, 0x1fb84,
0x1fbc0, 0x1fbc8,
0x1fc08, 0x1fc0c,
0x1fc40, 0x1fc4c,
0x1fe84, 0x1fe90,
0x1fec0, 0x1fec0,
0x1fee0, 0x1fee0,
0x1ff00, 0x1ff84,
0x1ffc0, 0x1ffc8,
0x30000, 0x30040,
0x30100, 0x30144,
0x30190, 0x301d0,
0x30200, 0x30318,
0x30400, 0x3052c,
0x30540, 0x3061c,
0x30800, 0x30834,
0x308c0, 0x30908,
0x30910, 0x309ac,
0x30a00, 0x30a04,
0x30a0c, 0x30a2c,
0x30a44, 0x30a50,
0x30a74, 0x30c24,
0x30d08, 0x30d14,
0x30d1c, 0x30d20,
0x30d3c, 0x30d50,
0x31200, 0x3120c,
0x31220, 0x31220,
0x31240, 0x31240,
0x31600, 0x31600,
0x31608, 0x3160c,
0x31a00, 0x31a1c,
0x31e04, 0x31e20,
0x31e38, 0x31e3c,
0x31e80, 0x31e80,
0x31e88, 0x31ea8,
0x31eb0, 0x31eb4,
0x31ec8, 0x31ed4,
0x31fb8, 0x32004,
0x32208, 0x3223c,
0x32248, 0x3227c,
0x32288, 0x322bc,
0x322c8, 0x322fc,
0x32600, 0x32630,
0x32a00, 0x32abc,
0x32b00, 0x32b70,
0x33000, 0x33048,
0x33060, 0x3309c,
0x330f0, 0x33148,
0x33160, 0x3319c,
0x331f0, 0x332e4,
0x332f8, 0x333e4,
0x333f8, 0x33448,
0x33460, 0x3349c,
0x334f0, 0x33548,
0x33560, 0x3359c,
0x335f0, 0x336e4,
0x336f8, 0x337e4,
0x337f8, 0x337fc,
0x33814, 0x33814,
0x3382c, 0x3382c,
0x33880, 0x3388c,
0x338e8, 0x338ec,
0x33900, 0x33948,
0x33960, 0x3399c,
0x339f0, 0x33ae4,
0x33af8, 0x33b10,
0x33b28, 0x33b28,
0x33b3c, 0x33b50,
0x33bf0, 0x33c10,
0x33c28, 0x33c28,
0x33c3c, 0x33c50,
0x33cf0, 0x33cfc,
0x34000, 0x34040,
0x34100, 0x34144,
0x34190, 0x341d0,
0x34200, 0x34318,
0x34400, 0x3452c,
0x34540, 0x3461c,
0x34800, 0x34834,
0x348c0, 0x34908,
0x34910, 0x349ac,
0x34a00, 0x34a04,
0x34a0c, 0x34a2c,
0x34a44, 0x34a50,
0x34a74, 0x34c24,
0x34d08, 0x34d14,
0x34d1c, 0x34d20,
0x34d3c, 0x34d50,
0x35200, 0x3520c,
0x35220, 0x35220,
0x35240, 0x35240,
0x35600, 0x35600,
0x35608, 0x3560c,
0x35a00, 0x35a1c,
0x35e04, 0x35e20,
0x35e38, 0x35e3c,
0x35e80, 0x35e80,
0x35e88, 0x35ea8,
0x35eb0, 0x35eb4,
0x35ec8, 0x35ed4,
0x35fb8, 0x36004,
0x36208, 0x3623c,
0x36248, 0x3627c,
0x36288, 0x362bc,
0x362c8, 0x362fc,
0x36600, 0x36630,
0x36a00, 0x36abc,
0x36b00, 0x36b70,
0x37000, 0x37048,
0x37060, 0x3709c,
0x370f0, 0x37148,
0x37160, 0x3719c,
0x371f0, 0x372e4,
0x372f8, 0x373e4,
0x373f8, 0x37448,
0x37460, 0x3749c,
0x374f0, 0x37548,
0x37560, 0x3759c,
0x375f0, 0x376e4,
0x376f8, 0x377e4,
0x377f8, 0x377fc,
0x37814, 0x37814,
0x3782c, 0x3782c,
0x37880, 0x3788c,
0x378e8, 0x378ec,
0x37900, 0x37948,
0x37960, 0x3799c,
0x379f0, 0x37ae4,
0x37af8, 0x37b10,
0x37b28, 0x37b28,
0x37b3c, 0x37b50,
0x37bf0, 0x37c10,
0x37c28, 0x37c28,
0x37c3c, 0x37c50,
0x37cf0, 0x37cfc,
0x38000, 0x38040,
0x38100, 0x38144,
0x38190, 0x381d0,
0x38200, 0x38318,
0x38400, 0x3852c,
0x38540, 0x3861c,
0x38800, 0x38834,
0x388c0, 0x38908,
0x38910, 0x389ac,
0x38a00, 0x38a04,
0x38a0c, 0x38a2c,
0x38a44, 0x38a50,
0x38a74, 0x38c24,
0x38d08, 0x38d14,
0x38d1c, 0x38d20,
0x38d3c, 0x38d50,
0x39200, 0x3920c,
0x39220, 0x39220,
0x39240, 0x39240,
0x39600, 0x39600,
0x39608, 0x3960c,
0x39a00, 0x39a1c,
0x39e04, 0x39e20,
0x39e38, 0x39e3c,
0x39e80, 0x39e80,
0x39e88, 0x39ea8,
0x39eb0, 0x39eb4,
0x39ec8, 0x39ed4,
0x39fb8, 0x3a004,
0x3a208, 0x3a23c,
0x3a248, 0x3a27c,
0x3a288, 0x3a2bc,
0x3a2c8, 0x3a2fc,
0x3a600, 0x3a630,
0x3aa00, 0x3aabc,
0x3ab00, 0x3ab70,
0x3b000, 0x3b048,
0x3b060, 0x3b09c,
0x3b0f0, 0x3b148,
0x3b160, 0x3b19c,
0x3b1f0, 0x3b2e4,
0x3b2f8, 0x3b3e4,
0x3b3f8, 0x3b448,
0x3b460, 0x3b49c,
0x3b4f0, 0x3b548,
0x3b560, 0x3b59c,
0x3b5f0, 0x3b6e4,
0x3b6f8, 0x3b7e4,
0x3b7f8, 0x3b7fc,
0x3b814, 0x3b814,
0x3b82c, 0x3b82c,
0x3b880, 0x3b88c,
0x3b8e8, 0x3b8ec,
0x3b900, 0x3b948,
0x3b960, 0x3b99c,
0x3b9f0, 0x3bae4,
0x3baf8, 0x3bb10,
0x3bb28, 0x3bb28,
0x3bb3c, 0x3bb50,
0x3bbf0, 0x3bc10,
0x3bc28, 0x3bc28,
0x3bc3c, 0x3bc50,
0x3bcf0, 0x3bcfc,
0x3c000, 0x3c040,
0x3c100, 0x3c144,
0x3c190, 0x3c1d0,
0x3c200, 0x3c318,
0x3c400, 0x3c52c,
0x3c540, 0x3c61c,
0x3c800, 0x3c834,
0x3c8c0, 0x3c908,
0x3c910, 0x3c9ac,
0x3ca00, 0x3ca04,
0x3ca0c, 0x3ca2c,
0x3ca44, 0x3ca50,
0x3ca74, 0x3cc24,
0x3cd08, 0x3cd14,
0x3cd1c, 0x3cd20,
0x3cd3c, 0x3cd50,
0x3d200, 0x3d20c,
0x3d220, 0x3d220,
0x3d240, 0x3d240,
0x3d600, 0x3d600,
0x3d608, 0x3d60c,
0x3da00, 0x3da1c,
0x3de04, 0x3de20,
0x3de38, 0x3de3c,
0x3de80, 0x3de80,
0x3de88, 0x3dea8,
0x3deb0, 0x3deb4,
0x3dec8, 0x3ded4,
0x3dfb8, 0x3e004,
0x3e208, 0x3e23c,
0x3e248, 0x3e27c,
0x3e288, 0x3e2bc,
0x3e2c8, 0x3e2fc,
0x3e600, 0x3e630,
0x3ea00, 0x3eabc,
0x3eb00, 0x3eb70,
0x3f000, 0x3f048,
0x3f060, 0x3f09c,
0x3f0f0, 0x3f148,
0x3f160, 0x3f19c,
0x3f1f0, 0x3f2e4,
0x3f2f8, 0x3f3e4,
0x3f3f8, 0x3f448,
0x3f460, 0x3f49c,
0x3f4f0, 0x3f548,
0x3f560, 0x3f59c,
0x3f5f0, 0x3f6e4,
0x3f6f8, 0x3f7e4,
0x3f7f8, 0x3f7fc,
0x3f814, 0x3f814,
0x3f82c, 0x3f82c,
0x3f880, 0x3f88c,
0x3f8e8, 0x3f8ec,
0x3f900, 0x3f948,
0x3f960, 0x3f99c,
0x3f9f0, 0x3fae4,
0x3faf8, 0x3fb10,
0x3fb28, 0x3fb28,
0x3fb3c, 0x3fb50,
0x3fbf0, 0x3fc10,
0x3fc28, 0x3fc28,
0x3fc3c, 0x3fc50,
0x3fcf0, 0x3fcfc,
0x40000, 0x4000c,
0x40040, 0x40068,
0x4007c, 0x40144,
0x40180, 0x4018c,
0x40200, 0x40298,
0x402ac, 0x4033c,
0x403f8, 0x403fc,
0x41300, 0x413c4,
0x41400, 0x4141c,
0x41480, 0x414d0,
0x44000, 0x44078,
0x440c0, 0x44278,
0x442c0, 0x44478,
0x444c0, 0x44678,
0x446c0, 0x44878,
0x448c0, 0x449fc,
0x45000, 0x45068,
0x45080, 0x45084,
0x450a0, 0x450b0,
0x45200, 0x45268,
0x45280, 0x45284,
0x452a0, 0x452b0,
0x460c0, 0x460e4,
0x47000, 0x4708c,
0x47200, 0x47250,
0x47400, 0x47420,
0x47600, 0x47618,
0x47800, 0x47814,
0x48000, 0x4800c,
0x48040, 0x48068,
0x4807c, 0x48144,
0x48180, 0x4818c,
0x48200, 0x48298,
0x482ac, 0x4833c,
0x483f8, 0x483fc,
0x49300, 0x493c4,
0x49400, 0x4941c,
0x49480, 0x494d0,
0x4c000, 0x4c078,
0x4c0c0, 0x4c278,
0x4c2c0, 0x4c478,
0x4c4c0, 0x4c678,
0x4c6c0, 0x4c878,
0x4c8c0, 0x4c9fc,
0x4d000, 0x4d068,
0x4d080, 0x4d084,
0x4d0a0, 0x4d0b0,
0x4d200, 0x4d268,
0x4d280, 0x4d284,
0x4d2a0, 0x4d2b0,
0x4e0c0, 0x4e0e4,
0x4f000, 0x4f08c,
0x4f200, 0x4f250,
0x4f400, 0x4f420,
0x4f600, 0x4f618,
0x4f800, 0x4f814,
0x50000, 0x500cc,
0x50400, 0x50400,
0x50800, 0x508cc,
0x50c00, 0x50c00,
0x51000, 0x5101c,
0x51300, 0x51308,
};
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
if (is_t4(sc)) {
reg_ranges = &t4_reg_ranges[0];
n = nitems(t4_reg_ranges);
} else {
reg_ranges = &t5_reg_ranges[0];
n = nitems(t5_reg_ranges);
}
regs->version = chip_id(sc) | chip_rev(sc) << 10;
for (i = 0; i < n; i += 2)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
reg_block_dump(sc, buf, reg_ranges[i], reg_ranges[i + 1]);
}
static void
cxgbe_tick(void *arg)
{
struct port_info *pi = arg;
struct ifnet *ifp = pi->ifp;
struct sge_txq *txq;
int i, drops;
struct port_stats *s = &pi->stats;
PORT_LOCK(pi);
if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) {
PORT_UNLOCK(pi);
return; /* without scheduling another callout */
}
t4_get_port_stats(pi->adapter, pi->tx_chan, s);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
ifp->if_opackets = s->tx_frames - s->tx_pause;
ifp->if_ipackets = s->rx_frames - s->rx_pause;
ifp->if_obytes = s->tx_octets - s->tx_pause * 64;
ifp->if_ibytes = s->rx_octets - s->rx_pause * 64;
ifp->if_omcasts = s->tx_mcast_frames - s->tx_pause;
ifp->if_imcasts = s->rx_mcast_frames - s->rx_pause;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
ifp->if_iqdrops = s->rx_ovflow0 + s->rx_ovflow1 + s->rx_ovflow2 +
if_iqdrops should include frames truncated within the chip. MFC after: 2 weeks
2012-08-14 22:15:12 +00:00
s->rx_ovflow3 + s->rx_trunc0 + s->rx_trunc1 + s->rx_trunc2 +
s->rx_trunc3;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
drops = s->tx_drop;
for_each_txq(pi, i, txq)
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
drops += txq->br->br_drops;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
ifp->if_snd.ifq_drops = drops;
ifp->if_oerrors = s->tx_error_frames;
ifp->if_ierrors = s->rx_jabber + s->rx_runt + s->rx_too_long +
s->rx_fcs_err + s->rx_len_err;
callout_schedule(&pi->tick, hz);
PORT_UNLOCK(pi);
}
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
static void
cxgbe_vlan_config(void *arg, struct ifnet *ifp, uint16_t vid)
{
struct ifnet *vlan;
Temporary fix for kern/172364. PR: kern/172364 MFC after: 3 days
2012-10-12 21:58:21 +00:00
if (arg != ifp || ifp->if_type != IFT_ETHER)
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
return;
vlan = VLAN_DEVAT(ifp, vid);
VLAN_SETCOOKIE(vlan, ifp);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static int
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cpl_not_handled(struct sge_iq *iq, const struct rss_header *rss, struct mbuf *m)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
#ifdef INVARIANTS
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
panic("%s: opcode 0x%02x on iq %p with payload %p",
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
__func__, rss->opcode, iq, m);
#else
Allow for a different handler for each type of firmware message. MFC after: 2 weeks
2012-08-16 18:31:50 +00:00
log(LOG_ERR, "%s: opcode 0x%02x on iq %p with payload %p\n",
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
__func__, rss->opcode, iq, m);
m_freem(m);
#endif
return (EDOOFUS);
}
int
t4_register_cpl_handler(struct adapter *sc, int opcode, cpl_handler_t h)
{
uintptr_t *loc, new;
Use native FreeBSD facilities everywhere except the shared code in common/ MFC after: 1 week
2012-09-13 09:10:10 +00:00
if (opcode >= nitems(sc->cpl_handler))
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return (EINVAL);
new = h ? (uintptr_t)h : (uintptr_t)cpl_not_handled;
loc = (uintptr_t *) &sc->cpl_handler[opcode];
atomic_store_rel_ptr(loc, new);
return (0);
}
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
static int
an_not_handled(struct sge_iq *iq, const struct rsp_ctrl *ctrl)
{
#ifdef INVARIANTS
panic("%s: async notification on iq %p (ctrl %p)", __func__, iq, ctrl);
#else
Allow for a different handler for each type of firmware message. MFC after: 2 weeks
2012-08-16 18:31:50 +00:00
log(LOG_ERR, "%s: async notification on iq %p (ctrl %p)\n",
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
__func__, iq, ctrl);
#endif
return (EDOOFUS);
}
int
t4_register_an_handler(struct adapter *sc, an_handler_t h)
{
uintptr_t *loc, new;
new = h ? (uintptr_t)h : (uintptr_t)an_not_handled;
loc = (uintptr_t *) &sc->an_handler;
atomic_store_rel_ptr(loc, new);
return (0);
}
Allow for a different handler for each type of firmware message. MFC after: 2 weeks
2012-08-16 18:31:50 +00:00
static int
fw_msg_not_handled(struct adapter *sc, const __be64 *rpl)
{
Prefer __containerof() over __member2struct(). The former works better with qualifiers, but also properly type checks the input pointer.
2012-10-19 13:26:40 +00:00
const struct cpl_fw6_msg *cpl =
__containerof(rpl, struct cpl_fw6_msg, data[0]);
Allow for a different handler for each type of firmware message. MFC after: 2 weeks
2012-08-16 18:31:50 +00:00
#ifdef INVARIANTS
panic("%s: fw_msg type %d", __func__, cpl->type);
#else
log(LOG_ERR, "%s: fw_msg type %d\n", __func__, cpl->type);
#endif
return (EDOOFUS);
}
int
t4_register_fw_msg_handler(struct adapter *sc, int type, fw_msg_handler_t h)
{
uintptr_t *loc, new;
Use native FreeBSD facilities everywhere except the shared code in common/ MFC after: 1 week
2012-09-13 09:10:10 +00:00
if (type >= nitems(sc->fw_msg_handler))
Allow for a different handler for each type of firmware message. MFC after: 2 weeks
2012-08-16 18:31:50 +00:00
return (EINVAL);
cxgbe(4): Ask the card's firmware to pad up tiny CPLs by encapsulating them in a firmware message if it is able to do so. This works out better for one of the FIFOs in the chip. MFC after: 5 days
2013-02-26 00:27:27 +00:00
/*
* These are dispatched by the handler for FW{4|6}_CPL_MSG using the CPL
* handler dispatch table. Reject any attempt to install a handler for
* this subtype.
*/
if (type == FW_TYPE_RSSCPL || type == FW6_TYPE_RSSCPL)
return (EINVAL);
Allow for a different handler for each type of firmware message. MFC after: 2 weeks
2012-08-16 18:31:50 +00:00
new = h ? (uintptr_t)h : (uintptr_t)fw_msg_not_handled;
loc = (uintptr_t *) &sc->fw_msg_handler[type];
atomic_store_rel_ptr(loc, new);
return (0);
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int
t4_sysctls(struct adapter *sc)
{
struct sysctl_ctx_list *ctx;
struct sysctl_oid *oid;
struct sysctl_oid_list *children, *c0;
static char *caps[] = {
"\20\1PPP\2QFC\3DCBX", /* caps[0] linkcaps */
"\20\1NIC\2VM\3IDS\4UM\5UM_ISGL", /* caps[1] niccaps */
"\20\1TOE", /* caps[2] toecaps */
"\20\1RDDP\2RDMAC", /* caps[3] rdmacaps */
"\20\1INITIATOR_PDU\2TARGET_PDU" /* caps[4] iscsicaps */
"\3INITIATOR_CNXOFLD\4TARGET_CNXOFLD"
"\5INITIATOR_SSNOFLD\6TARGET_SSNOFLD",
"\20\1INITIATOR\2TARGET\3CTRL_OFLD" /* caps[5] fcoecaps */
};
Cosmetic change (s/wrwc/wcwr/;s/WRWC/WCWR/). MFC after: 3 days.
2013-04-11 22:49:29 +00:00
static char *doorbells = {"\20\1UDB\2WCWR\3UDBWC\4KDB"};
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
ctx = device_get_sysctl_ctx(sc->dev);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/*
* dev.t4nex.X.
*/
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
oid = device_get_sysctl_tree(sc->dev);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
c0 = children = SYSCTL_CHILDREN(oid);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
SYSCTL_ADD_INT(ctx, children, OID_AUTO, "nports", CTLFLAG_RD, NULL,
sc->params.nports, "# of ports");
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
SYSCTL_ADD_INT(ctx, children, OID_AUTO, "hw_revision", CTLFLAG_RD,
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
NULL, chip_rev(sc), "chip hardware revision");
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
SYSCTL_ADD_STRING(ctx, children, OID_AUTO, "firmware_version",
CTLFLAG_RD, &sc->fw_version, 0, "firmware version");
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
SYSCTL_ADD_STRING(ctx, children, OID_AUTO, "cf",
Force the 404-BT card (4 x 1G) to use the "uwire" configuration file. MFC after: 3 days
2013-01-26 03:10:28 +00:00
CTLFLAG_RD, &sc->cfg_file, 0, "configuration file");
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
SYSCTL_ADD_UINT(ctx, children, OID_AUTO, "cfcsum", CTLFLAG_RD, NULL,
sc->cfcsum, "config file checksum");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "doorbells",
CTLTYPE_STRING | CTLFLAG_RD, doorbells, sc->doorbells,
sysctl_bitfield, "A", "available doorbells");
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "linkcaps",
CTLTYPE_STRING | CTLFLAG_RD, caps[0], sc->linkcaps,
sysctl_bitfield, "A", "available link capabilities");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "niccaps",
CTLTYPE_STRING | CTLFLAG_RD, caps[1], sc->niccaps,
sysctl_bitfield, "A", "available NIC capabilities");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "toecaps",
CTLTYPE_STRING | CTLFLAG_RD, caps[2], sc->toecaps,
sysctl_bitfield, "A", "available TCP offload capabilities");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "rdmacaps",
CTLTYPE_STRING | CTLFLAG_RD, caps[3], sc->rdmacaps,
sysctl_bitfield, "A", "available RDMA capabilities");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "iscsicaps",
CTLTYPE_STRING | CTLFLAG_RD, caps[4], sc->iscsicaps,
sysctl_bitfield, "A", "available iSCSI capabilities");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "fcoecaps",
CTLTYPE_STRING | CTLFLAG_RD, caps[5], sc->fcoecaps,
sysctl_bitfield, "A", "available FCoE capabilities");
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
SYSCTL_ADD_INT(ctx, children, OID_AUTO, "core_clock", CTLFLAG_RD, NULL,
sc->params.vpd.cclk, "core clock frequency (in KHz)");
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Display holdoff timers and packet counts as a list of numbers. MFC after: 1 week
2011-03-09 21:07:09 +00:00
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "holdoff_timers",
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
CTLTYPE_STRING | CTLFLAG_RD, sc->sge.timer_val,
sizeof(sc->sge.timer_val), sysctl_int_array, "A",
"interrupt holdoff timer values (us)");
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Display holdoff timers and packet counts as a list of numbers. MFC after: 1 week
2011-03-09 21:07:09 +00:00
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "holdoff_pkt_counts",
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
CTLTYPE_STRING | CTLFLAG_RD, sc->sge.counter_val,
sizeof(sc->sge.counter_val), sysctl_int_array, "A",
"interrupt holdoff packet counter values");
cxgbe: reduce diffs with other branches. Will help future MFCs from HEAD. MFC after: 3 days
2012-02-07 06:21:59 +00:00
#ifdef SBUF_DRAIN
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/*
* dev.t4nex.X.misc. Marked CTLFLAG_SKIP to avoid information overload.
*/
oid = SYSCTL_ADD_NODE(ctx, c0, OID_AUTO, "misc",
CTLFLAG_RD | CTLFLAG_SKIP, NULL,
"logs and miscellaneous information");
children = SYSCTL_CHILDREN(oid);
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "cctrl",
CTLTYPE_STRING | CTLFLAG_RD, sc, 0,
sysctl_cctrl, "A", "congestion control");
cxgbe(4): Add sysctls to extract debug information from the chip: dev.t4nex.X.misc.cim_la logic analyzer dump dev.t4nex.X.misc.cim_qcfg queue configuration dev.t4nex.X.misc.cim_ibq_xxx inbound queues dev.t4nex.X.misc.cim_obq_xxx outbound queues Obtained from: Chelsio MFC after: 1 week
2013-02-21 20:13:15 +00:00
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "cim_ibq_tp0",
CTLTYPE_STRING | CTLFLAG_RD, sc, 0,
sysctl_cim_ibq_obq, "A", "CIM IBQ 0 (TP0)");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "cim_ibq_tp1",
CTLTYPE_STRING | CTLFLAG_RD, sc, 1,
sysctl_cim_ibq_obq, "A", "CIM IBQ 1 (TP1)");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "cim_ibq_ulp",
CTLTYPE_STRING | CTLFLAG_RD, sc, 2,
sysctl_cim_ibq_obq, "A", "CIM IBQ 2 (ULP)");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "cim_ibq_sge0",
CTLTYPE_STRING | CTLFLAG_RD, sc, 3,
sysctl_cim_ibq_obq, "A", "CIM IBQ 3 (SGE0)");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "cim_ibq_sge1",
CTLTYPE_STRING | CTLFLAG_RD, sc, 4,
sysctl_cim_ibq_obq, "A", "CIM IBQ 4 (SGE1)");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "cim_ibq_ncsi",
CTLTYPE_STRING | CTLFLAG_RD, sc, 5,
sysctl_cim_ibq_obq, "A", "CIM IBQ 5 (NCSI)");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "cim_la",
CTLTYPE_STRING | CTLFLAG_RD, sc, 0,
sysctl_cim_la, "A", "CIM logic analyzer");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "cim_obq_ulp0",
CTLTYPE_STRING | CTLFLAG_RD, sc, 0 + CIM_NUM_IBQ,
sysctl_cim_ibq_obq, "A", "CIM OBQ 0 (ULP0)");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "cim_obq_ulp1",
CTLTYPE_STRING | CTLFLAG_RD, sc, 1 + CIM_NUM_IBQ,
sysctl_cim_ibq_obq, "A", "CIM OBQ 1 (ULP1)");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "cim_obq_ulp2",
CTLTYPE_STRING | CTLFLAG_RD, sc, 2 + CIM_NUM_IBQ,
sysctl_cim_ibq_obq, "A", "CIM OBQ 2 (ULP2)");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "cim_obq_ulp3",
CTLTYPE_STRING | CTLFLAG_RD, sc, 3 + CIM_NUM_IBQ,
sysctl_cim_ibq_obq, "A", "CIM OBQ 3 (ULP3)");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "cim_obq_sge",
CTLTYPE_STRING | CTLFLAG_RD, sc, 4 + CIM_NUM_IBQ,
sysctl_cim_ibq_obq, "A", "CIM OBQ 4 (SGE)");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "cim_obq_ncsi",
CTLTYPE_STRING | CTLFLAG_RD, sc, 5 + CIM_NUM_IBQ,
sysctl_cim_ibq_obq, "A", "CIM OBQ 5 (NCSI)");
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
if (is_t5(sc)) {
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "cim_obq_sge0_rx",
CTLTYPE_STRING | CTLFLAG_RD, sc, 6 + CIM_NUM_IBQ,
sysctl_cim_ibq_obq, "A", "CIM OBQ 6 (SGE0-RX)");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "cim_obq_sge1_rx",
CTLTYPE_STRING | CTLFLAG_RD, sc, 7 + CIM_NUM_IBQ,
sysctl_cim_ibq_obq, "A", "CIM OBQ 7 (SGE1-RX)");
}
cxgbe(4): Add sysctls to extract debug information from the chip: dev.t4nex.X.misc.cim_la logic analyzer dump dev.t4nex.X.misc.cim_qcfg queue configuration dev.t4nex.X.misc.cim_ibq_xxx inbound queues dev.t4nex.X.misc.cim_obq_xxx outbound queues Obtained from: Chelsio MFC after: 1 week
2013-02-21 20:13:15 +00:00
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "cim_qcfg",
CTLTYPE_STRING | CTLFLAG_RD, sc, 0,
sysctl_cim_qcfg, "A", "CIM queue configuration");
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "cpl_stats",
CTLTYPE_STRING | CTLFLAG_RD, sc, 0,
sysctl_cpl_stats, "A", "CPL statistics");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "ddp_stats",
CTLTYPE_STRING | CTLFLAG_RD, sc, 0,
sysctl_ddp_stats, "A", "DDP statistics");
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Firmware device log. # sysctl dev.t4nex.0.devlog MFC after: mdf's sysctl+sbuf changes are MFC'd
2011-05-31 23:49:13 +00:00
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "devlog",
CTLTYPE_STRING | CTLFLAG_RD, sc, 0,
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
sysctl_devlog, "A", "firmware's device log");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "fcoe_stats",
CTLTYPE_STRING | CTLFLAG_RD, sc, 0,
sysctl_fcoe_stats, "A", "FCoE statistics");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "hw_sched",
CTLTYPE_STRING | CTLFLAG_RD, sc, 0,
sysctl_hw_sched, "A", "hardware scheduler ");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "l2t",
CTLTYPE_STRING | CTLFLAG_RD, sc, 0,
sysctl_l2t, "A", "hardware L2 table");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "lb_stats",
CTLTYPE_STRING | CTLFLAG_RD, sc, 0,
sysctl_lb_stats, "A", "loopback statistics");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "meminfo",
CTLTYPE_STRING | CTLFLAG_RD, sc, 0,
sysctl_meminfo, "A", "memory regions");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "path_mtus",
CTLTYPE_STRING | CTLFLAG_RD, sc, 0,
sysctl_path_mtus, "A", "path MTUs");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "pm_stats",
CTLTYPE_STRING | CTLFLAG_RD, sc, 0,
sysctl_pm_stats, "A", "PM statistics");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "rdma_stats",
CTLTYPE_STRING | CTLFLAG_RD, sc, 0,
sysctl_rdma_stats, "A", "RDMA statistics");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "tcp_stats",
CTLTYPE_STRING | CTLFLAG_RD, sc, 0,
sysctl_tcp_stats, "A", "TCP statistics");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "tids",
CTLTYPE_STRING | CTLFLAG_RD, sc, 0,
sysctl_tids, "A", "TID information");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "tp_err_stats",
CTLTYPE_STRING | CTLFLAG_RD, sc, 0,
sysctl_tp_err_stats, "A", "TP error statistics");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "tx_rate",
CTLTYPE_STRING | CTLFLAG_RD, sc, 0,
sysctl_tx_rate, "A", "Tx rate");
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
if (is_t5(sc)) {
Cosmetic change (s/wrwc/wcwr/;s/WRWC/WCWR/). MFC after: 3 days.
2013-04-11 22:49:29 +00:00
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "wcwr_stats",
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
CTLTYPE_STRING | CTLFLAG_RD, sc, 0,
Cosmetic change (s/wrwc/wcwr/;s/WRWC/WCWR/). MFC after: 3 days.
2013-04-11 22:49:29 +00:00
sysctl_wcwr_stats, "A", "write combined work requests");
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
}
cxgbe: reduce diffs with other branches. Will help future MFCs from HEAD. MFC after: 3 days
2012-02-07 06:21:59 +00:00
#endif
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (is_offload(sc)) {
/*
* dev.t4nex.X.toe.
*/
oid = SYSCTL_ADD_NODE(ctx, c0, OID_AUTO, "toe", CTLFLAG_RD,
NULL, "TOE parameters");
children = SYSCTL_CHILDREN(oid);
sc->tt.sndbuf = 256 * 1024;
SYSCTL_ADD_INT(ctx, children, OID_AUTO, "sndbuf", CTLFLAG_RW,
&sc->tt.sndbuf, 0, "max hardware send buffer size");
sc->tt.ddp = 0;
SYSCTL_ADD_INT(ctx, children, OID_AUTO, "ddp", CTLFLAG_RW,
&sc->tt.ddp, 0, "DDP allowed");
Initialize various DDP parameters in the main cxgbe(4) driver: - Setup multiple DDP page sizes. When the driver attempts DDP it will try to combine physically contiguous pages into regions of these sizes. - Set the indicate size such that the payload carried in the indicate can be copied in the header mbuf (and the 16K rx buffer can be recycled). - Set DDP threshold to the max payload that the chip will coalesce and deliver to the driver (this is ~16K by default, which is also why the offload rx queue is backed by 16K buffers). If the chip is able to coalesce up to the max it's allowed to, it's a good sign that the peer is transmitting in bulk without any TCP PSH. MFC after: 2 weeks
2012-08-16 22:33:56 +00:00
sc->tt.indsz = G_INDICATESIZE(t4_read_reg(sc, A_TP_PARA_REG5));
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
SYSCTL_ADD_INT(ctx, children, OID_AUTO, "indsz", CTLFLAG_RW,
&sc->tt.indsz, 0, "DDP max indicate size allowed");
Initialize various DDP parameters in the main cxgbe(4) driver: - Setup multiple DDP page sizes. When the driver attempts DDP it will try to combine physically contiguous pages into regions of these sizes. - Set the indicate size such that the payload carried in the indicate can be copied in the header mbuf (and the 16K rx buffer can be recycled). - Set DDP threshold to the max payload that the chip will coalesce and deliver to the driver (this is ~16K by default, which is also why the offload rx queue is backed by 16K buffers). If the chip is able to coalesce up to the max it's allowed to, it's a good sign that the peer is transmitting in bulk without any TCP PSH. MFC after: 2 weeks
2012-08-16 22:33:56 +00:00
sc->tt.ddp_thres =
G_RXCOALESCESIZE(t4_read_reg(sc, A_TP_PARA_REG2));
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
SYSCTL_ADD_INT(ctx, children, OID_AUTO, "ddp_thres", CTLFLAG_RW,
&sc->tt.ddp_thres, 0, "DDP threshold");
}
#endif
Firmware device log. # sysctl dev.t4nex.0.devlog MFC after: mdf's sysctl+sbuf changes are MFC'd
2011-05-31 23:49:13 +00:00
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
return (0);
}
static int
cxgbe_sysctls(struct port_info *pi)
{
struct sysctl_ctx_list *ctx;
struct sysctl_oid *oid;
struct sysctl_oid_list *children;
ctx = device_get_sysctl_ctx(pi->dev);
/*
* dev.cxgbe.X.
*/
oid = device_get_sysctl_tree(pi->dev);
children = SYSCTL_CHILDREN(oid);
SYSCTL_ADD_INT(ctx, children, OID_AUTO, "nrxq", CTLFLAG_RD,
&pi->nrxq, 0, "# of rx queues");
SYSCTL_ADD_INT(ctx, children, OID_AUTO, "ntxq", CTLFLAG_RD,
&pi->ntxq, 0, "# of tx queues");
SYSCTL_ADD_INT(ctx, children, OID_AUTO, "first_rxq", CTLFLAG_RD,
&pi->first_rxq, 0, "index of first rx queue");
SYSCTL_ADD_INT(ctx, children, OID_AUTO, "first_txq", CTLFLAG_RD,
&pi->first_txq, 0, "index of first tx queue");
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (is_offload(pi->adapter)) {
SYSCTL_ADD_INT(ctx, children, OID_AUTO, "nofldrxq", CTLFLAG_RD,
&pi->nofldrxq, 0,
"# of rx queues for offloaded TCP connections");
SYSCTL_ADD_INT(ctx, children, OID_AUTO, "nofldtxq", CTLFLAG_RD,
&pi->nofldtxq, 0,
"# of tx queues for offloaded TCP connections");
SYSCTL_ADD_INT(ctx, children, OID_AUTO, "first_ofld_rxq",
CTLFLAG_RD, &pi->first_ofld_rxq, 0,
"index of first TOE rx queue");
SYSCTL_ADD_INT(ctx, children, OID_AUTO, "first_ofld_txq",
CTLFLAG_RD, &pi->first_ofld_txq, 0,
"index of first TOE tx queue");
}
#endif
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "holdoff_tmr_idx",
CTLTYPE_INT | CTLFLAG_RW, pi, 0, sysctl_holdoff_tmr_idx, "I",
"holdoff timer index");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "holdoff_pktc_idx",
CTLTYPE_INT | CTLFLAG_RW, pi, 0, sysctl_holdoff_pktc_idx, "I",
"holdoff packet counter index");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "qsize_rxq",
CTLTYPE_INT | CTLFLAG_RW, pi, 0, sysctl_qsize_rxq, "I",
"rx queue size");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "qsize_txq",
CTLTYPE_INT | CTLFLAG_RW, pi, 0, sysctl_qsize_txq, "I",
"tx queue size");
/*
* dev.cxgbe.X.stats.
*/
oid = SYSCTL_ADD_NODE(ctx, children, OID_AUTO, "stats", CTLFLAG_RD,
NULL, "port statistics");
children = SYSCTL_CHILDREN(oid);
#define SYSCTL_ADD_T4_REG64(pi, name, desc, reg) \
SYSCTL_ADD_OID(ctx, children, OID_AUTO, name, \
CTLTYPE_U64 | CTLFLAG_RD, pi->adapter, reg, \
sysctl_handle_t4_reg64, "QU", desc)
SYSCTL_ADD_T4_REG64(pi, "tx_octets", "# of octets in good frames",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_TX_PORT_BYTES_L));
SYSCTL_ADD_T4_REG64(pi, "tx_frames", "total # of good frames",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_TX_PORT_FRAMES_L));
SYSCTL_ADD_T4_REG64(pi, "tx_bcast_frames", "# of broadcast frames",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_TX_PORT_BCAST_L));
SYSCTL_ADD_T4_REG64(pi, "tx_mcast_frames", "# of multicast frames",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_TX_PORT_MCAST_L));
SYSCTL_ADD_T4_REG64(pi, "tx_ucast_frames", "# of unicast frames",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_TX_PORT_UCAST_L));
SYSCTL_ADD_T4_REG64(pi, "tx_error_frames", "# of error frames",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_TX_PORT_ERROR_L));
SYSCTL_ADD_T4_REG64(pi, "tx_frames_64",
"# of tx frames in this range",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_TX_PORT_64B_L));
SYSCTL_ADD_T4_REG64(pi, "tx_frames_65_127",
"# of tx frames in this range",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_TX_PORT_65B_127B_L));
SYSCTL_ADD_T4_REG64(pi, "tx_frames_128_255",
"# of tx frames in this range",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_TX_PORT_128B_255B_L));
SYSCTL_ADD_T4_REG64(pi, "tx_frames_256_511",
"# of tx frames in this range",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_TX_PORT_256B_511B_L));
SYSCTL_ADD_T4_REG64(pi, "tx_frames_512_1023",
"# of tx frames in this range",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_TX_PORT_512B_1023B_L));
SYSCTL_ADD_T4_REG64(pi, "tx_frames_1024_1518",
"# of tx frames in this range",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_TX_PORT_1024B_1518B_L));
SYSCTL_ADD_T4_REG64(pi, "tx_frames_1519_max",
"# of tx frames in this range",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_TX_PORT_1519B_MAX_L));
SYSCTL_ADD_T4_REG64(pi, "tx_drop", "# of dropped tx frames",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_TX_PORT_DROP_L));
SYSCTL_ADD_T4_REG64(pi, "tx_pause", "# of pause frames transmitted",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_TX_PORT_PAUSE_L));
SYSCTL_ADD_T4_REG64(pi, "tx_ppp0", "# of PPP prio 0 frames transmitted",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_TX_PORT_PPP0_L));
SYSCTL_ADD_T4_REG64(pi, "tx_ppp1", "# of PPP prio 1 frames transmitted",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_TX_PORT_PPP1_L));
SYSCTL_ADD_T4_REG64(pi, "tx_ppp2", "# of PPP prio 2 frames transmitted",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_TX_PORT_PPP2_L));
SYSCTL_ADD_T4_REG64(pi, "tx_ppp3", "# of PPP prio 3 frames transmitted",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_TX_PORT_PPP3_L));
SYSCTL_ADD_T4_REG64(pi, "tx_ppp4", "# of PPP prio 4 frames transmitted",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_TX_PORT_PPP4_L));
SYSCTL_ADD_T4_REG64(pi, "tx_ppp5", "# of PPP prio 5 frames transmitted",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_TX_PORT_PPP5_L));
SYSCTL_ADD_T4_REG64(pi, "tx_ppp6", "# of PPP prio 6 frames transmitted",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_TX_PORT_PPP6_L));
SYSCTL_ADD_T4_REG64(pi, "tx_ppp7", "# of PPP prio 7 frames transmitted",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_TX_PORT_PPP7_L));
SYSCTL_ADD_T4_REG64(pi, "rx_octets", "# of octets in good frames",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_RX_PORT_BYTES_L));
SYSCTL_ADD_T4_REG64(pi, "rx_frames", "total # of good frames",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_RX_PORT_FRAMES_L));
SYSCTL_ADD_T4_REG64(pi, "rx_bcast_frames", "# of broadcast frames",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_RX_PORT_BCAST_L));
SYSCTL_ADD_T4_REG64(pi, "rx_mcast_frames", "# of multicast frames",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_RX_PORT_MCAST_L));
SYSCTL_ADD_T4_REG64(pi, "rx_ucast_frames", "# of unicast frames",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_RX_PORT_UCAST_L));
SYSCTL_ADD_T4_REG64(pi, "rx_too_long", "# of frames exceeding MTU",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_RX_PORT_MTU_ERROR_L));
SYSCTL_ADD_T4_REG64(pi, "rx_jabber", "# of jabber frames",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_RX_PORT_MTU_CRC_ERROR_L));
SYSCTL_ADD_T4_REG64(pi, "rx_fcs_err",
"# of frames received with bad FCS",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_RX_PORT_CRC_ERROR_L));
SYSCTL_ADD_T4_REG64(pi, "rx_len_err",
"# of frames received with length error",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_RX_PORT_LEN_ERROR_L));
SYSCTL_ADD_T4_REG64(pi, "rx_symbol_err", "symbol errors",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_RX_PORT_SYM_ERROR_L));
SYSCTL_ADD_T4_REG64(pi, "rx_runt", "# of short frames received",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_RX_PORT_LESS_64B_L));
SYSCTL_ADD_T4_REG64(pi, "rx_frames_64",
"# of rx frames in this range",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_RX_PORT_64B_L));
SYSCTL_ADD_T4_REG64(pi, "rx_frames_65_127",
"# of rx frames in this range",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_RX_PORT_65B_127B_L));
SYSCTL_ADD_T4_REG64(pi, "rx_frames_128_255",
"# of rx frames in this range",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_RX_PORT_128B_255B_L));
SYSCTL_ADD_T4_REG64(pi, "rx_frames_256_511",
"# of rx frames in this range",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_RX_PORT_256B_511B_L));
SYSCTL_ADD_T4_REG64(pi, "rx_frames_512_1023",
"# of rx frames in this range",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_RX_PORT_512B_1023B_L));
SYSCTL_ADD_T4_REG64(pi, "rx_frames_1024_1518",
"# of rx frames in this range",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_RX_PORT_1024B_1518B_L));
SYSCTL_ADD_T4_REG64(pi, "rx_frames_1519_max",
"# of rx frames in this range",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_RX_PORT_1519B_MAX_L));
SYSCTL_ADD_T4_REG64(pi, "rx_pause", "# of pause frames received",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_RX_PORT_PAUSE_L));
SYSCTL_ADD_T4_REG64(pi, "rx_ppp0", "# of PPP prio 0 frames received",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_RX_PORT_PPP0_L));
SYSCTL_ADD_T4_REG64(pi, "rx_ppp1", "# of PPP prio 1 frames received",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_RX_PORT_PPP1_L));
SYSCTL_ADD_T4_REG64(pi, "rx_ppp2", "# of PPP prio 2 frames received",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_RX_PORT_PPP2_L));
SYSCTL_ADD_T4_REG64(pi, "rx_ppp3", "# of PPP prio 3 frames received",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_RX_PORT_PPP3_L));
SYSCTL_ADD_T4_REG64(pi, "rx_ppp4", "# of PPP prio 4 frames received",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_RX_PORT_PPP4_L));
SYSCTL_ADD_T4_REG64(pi, "rx_ppp5", "# of PPP prio 5 frames received",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_RX_PORT_PPP5_L));
SYSCTL_ADD_T4_REG64(pi, "rx_ppp6", "# of PPP prio 6 frames received",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_RX_PORT_PPP6_L));
SYSCTL_ADD_T4_REG64(pi, "rx_ppp7", "# of PPP prio 7 frames received",
PORT_REG(pi->tx_chan, A_MPS_PORT_STAT_RX_PORT_PPP7_L));
#undef SYSCTL_ADD_T4_REG64
#define SYSCTL_ADD_T4_PORTSTAT(name, desc) \
SYSCTL_ADD_UQUAD(ctx, children, OID_AUTO, #name, CTLFLAG_RD, \
&pi->stats.name, desc)
/* We get these from port_stats and they may be stale by upto 1s */
SYSCTL_ADD_T4_PORTSTAT(rx_ovflow0,
"# drops due to buffer-group 0 overflows");
SYSCTL_ADD_T4_PORTSTAT(rx_ovflow1,
"# drops due to buffer-group 1 overflows");
SYSCTL_ADD_T4_PORTSTAT(rx_ovflow2,
"# drops due to buffer-group 2 overflows");
SYSCTL_ADD_T4_PORTSTAT(rx_ovflow3,
"# drops due to buffer-group 3 overflows");
SYSCTL_ADD_T4_PORTSTAT(rx_trunc0,
"# of buffer-group 0 truncated packets");
SYSCTL_ADD_T4_PORTSTAT(rx_trunc1,
"# of buffer-group 1 truncated packets");
SYSCTL_ADD_T4_PORTSTAT(rx_trunc2,
"# of buffer-group 2 truncated packets");
SYSCTL_ADD_T4_PORTSTAT(rx_trunc3,
"# of buffer-group 3 truncated packets");
#undef SYSCTL_ADD_T4_PORTSTAT
return (0);
}
Display holdoff timers and packet counts as a list of numbers. MFC after: 1 week
2011-03-09 21:07:09 +00:00
static int
sysctl_int_array(SYSCTL_HANDLER_ARGS)
{
int rc, *i;
struct sbuf sb;
sbuf_new(&sb, NULL, 32, SBUF_AUTOEXTEND);
for (i = arg1; arg2; arg2 -= sizeof(int), i++)
sbuf_printf(&sb, "%d ", *i);
sbuf_trim(&sb);
sbuf_finish(&sb);
rc = sysctl_handle_string(oidp, sbuf_data(&sb), sbuf_len(&sb), req);
sbuf_delete(&sb);
return (rc);
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int
sysctl_bitfield(SYSCTL_HANDLER_ARGS)
{
int rc;
struct sbuf *sb;
rc = sysctl_wire_old_buffer(req, 0);
if (rc != 0)
return(rc);
sb = sbuf_new_for_sysctl(NULL, NULL, 128, req);
if (sb == NULL)
return (ENOMEM);
sbuf_printf(sb, "%b", (int)arg2, (char *)arg1);
rc = sbuf_finish(sb);
sbuf_delete(sb);
return (rc);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static int
sysctl_holdoff_tmr_idx(SYSCTL_HANDLER_ARGS)
{
struct port_info *pi = arg1;
struct adapter *sc = pi->adapter;
int idx, rc, i;
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
struct sge_rxq *rxq;
uint8_t v;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
idx = pi->tmr_idx;
rc = sysctl_handle_int(oidp, &idx, 0, req);
if (rc != 0 || req->newptr == NULL)
return (rc);
if (idx < 0 || idx >= SGE_NTIMERS)
return (EINVAL);
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
rc = begin_synchronized_op(sc, pi, HOLD_LOCK | SLEEP_OK | INTR_OK,
"t4tmr");
if (rc)
return (rc);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
v = V_QINTR_TIMER_IDX(idx) | V_QINTR_CNT_EN(pi->pktc_idx != -1);
for_each_rxq(pi, i, rxq) {
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
#ifdef atomic_store_rel_8
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
atomic_store_rel_8(&rxq->iq.intr_params, v);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
#else
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
rxq->iq.intr_params = v;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
#endif
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
pi->tmr_idx = idx;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
end_synchronized_op(sc, LOCK_HELD);
return (0);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
static int
sysctl_holdoff_pktc_idx(SYSCTL_HANDLER_ARGS)
{
struct port_info *pi = arg1;
struct adapter *sc = pi->adapter;
int idx, rc;
idx = pi->pktc_idx;
rc = sysctl_handle_int(oidp, &idx, 0, req);
if (rc != 0 || req->newptr == NULL)
return (rc);
if (idx < -1 || idx >= SGE_NCOUNTERS)
return (EINVAL);
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
rc = begin_synchronized_op(sc, pi, HOLD_LOCK | SLEEP_OK | INTR_OK,
"t4pktc");
if (rc)
return (rc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
if (pi->flags & PORT_INIT_DONE)
rc = EBUSY; /* cannot be changed once the queues are created */
else
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
pi->pktc_idx = idx;
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
end_synchronized_op(sc, LOCK_HELD);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
return (rc);
}
static int
sysctl_qsize_rxq(SYSCTL_HANDLER_ARGS)
{
struct port_info *pi = arg1;
struct adapter *sc = pi->adapter;
int qsize, rc;
qsize = pi->qsize_rxq;
rc = sysctl_handle_int(oidp, &qsize, 0, req);
if (rc != 0 || req->newptr == NULL)
return (rc);
if (qsize < 128 || (qsize & 7))
return (EINVAL);
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
rc = begin_synchronized_op(sc, pi, HOLD_LOCK | SLEEP_OK | INTR_OK,
"t4rxqs");
if (rc)
return (rc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
if (pi->flags & PORT_INIT_DONE)
rc = EBUSY; /* cannot be changed once the queues are created */
else
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
pi->qsize_rxq = qsize;
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
end_synchronized_op(sc, LOCK_HELD);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
return (rc);
}
static int
sysctl_qsize_txq(SYSCTL_HANDLER_ARGS)
{
struct port_info *pi = arg1;
struct adapter *sc = pi->adapter;
int qsize, rc;
qsize = pi->qsize_txq;
rc = sysctl_handle_int(oidp, &qsize, 0, req);
if (rc != 0 || req->newptr == NULL)
return (rc);
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
/* bufring size must be powerof2 */
if (qsize < 128 || !powerof2(qsize))
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
return (EINVAL);
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
rc = begin_synchronized_op(sc, pi, HOLD_LOCK | SLEEP_OK | INTR_OK,
"t4txqs");
if (rc)
return (rc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
if (pi->flags & PORT_INIT_DONE)
rc = EBUSY; /* cannot be changed once the queues are created */
else
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
pi->qsize_txq = qsize;
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
end_synchronized_op(sc, LOCK_HELD);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
return (rc);
}
static int
sysctl_handle_t4_reg64(SYSCTL_HANDLER_ARGS)
{
struct adapter *sc = arg1;
int reg = arg2;
uint64_t val;
val = t4_read_reg64(sc, reg);
return (sysctl_handle_64(oidp, &val, 0, req));
}
cxgbe: reduce diffs with other branches. Will help future MFCs from HEAD. MFC after: 3 days
2012-02-07 06:21:59 +00:00
#ifdef SBUF_DRAIN
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int
sysctl_cctrl(SYSCTL_HANDLER_ARGS)
{
struct adapter *sc = arg1;
struct sbuf *sb;
int rc, i;
uint16_t incr[NMTUS][NCCTRL_WIN];
static const char *dec_fac[] = {
"0.5", "0.5625", "0.625", "0.6875", "0.75", "0.8125", "0.875",
"0.9375"
};
rc = sysctl_wire_old_buffer(req, 0);
if (rc != 0)
return (rc);
sb = sbuf_new_for_sysctl(NULL, NULL, 4096, req);
if (sb == NULL)
return (ENOMEM);
t4_read_cong_tbl(sc, incr);
for (i = 0; i < NCCTRL_WIN; ++i) {
sbuf_printf(sb, "%2d: %4u %4u %4u %4u %4u %4u %4u %4u\n", i,
incr[0][i], incr[1][i], incr[2][i], incr[3][i], incr[4][i],
incr[5][i], incr[6][i], incr[7][i]);
sbuf_printf(sb, "%8u %4u %4u %4u %4u %4u %4u %4u %5u %s\n",
incr[8][i], incr[9][i], incr[10][i], incr[11][i],
incr[12][i], incr[13][i], incr[14][i], incr[15][i],
sc->params.a_wnd[i], dec_fac[sc->params.b_wnd[i]]);
}
rc = sbuf_finish(sb);
sbuf_delete(sb);
cxgbe(4): Add sysctls to extract debug information from the chip: dev.t4nex.X.misc.cim_la logic analyzer dump dev.t4nex.X.misc.cim_qcfg queue configuration dev.t4nex.X.misc.cim_ibq_xxx inbound queues dev.t4nex.X.misc.cim_obq_xxx outbound queues Obtained from: Chelsio MFC after: 1 week
2013-02-21 20:13:15 +00:00
return (rc);
}
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
static const char *qname[CIM_NUM_IBQ + CIM_NUM_OBQ_T5] = {
cxgbe(4): Add sysctls to extract debug information from the chip: dev.t4nex.X.misc.cim_la logic analyzer dump dev.t4nex.X.misc.cim_qcfg queue configuration dev.t4nex.X.misc.cim_ibq_xxx inbound queues dev.t4nex.X.misc.cim_obq_xxx outbound queues Obtained from: Chelsio MFC after: 1 week
2013-02-21 20:13:15 +00:00
"TP0", "TP1", "ULP", "SGE0", "SGE1", "NC-SI", /* ibq's */
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
"ULP0", "ULP1", "ULP2", "ULP3", "SGE", "NC-SI", /* obq's */
"SGE0-RX", "SGE1-RX" /* additional obq's (T5 onwards) */
cxgbe(4): Add sysctls to extract debug information from the chip: dev.t4nex.X.misc.cim_la logic analyzer dump dev.t4nex.X.misc.cim_qcfg queue configuration dev.t4nex.X.misc.cim_ibq_xxx inbound queues dev.t4nex.X.misc.cim_obq_xxx outbound queues Obtained from: Chelsio MFC after: 1 week
2013-02-21 20:13:15 +00:00
};
static int
sysctl_cim_ibq_obq(SYSCTL_HANDLER_ARGS)
{
struct adapter *sc = arg1;
struct sbuf *sb;
int rc, i, n, qid = arg2;
uint32_t *buf, *p;
char *qtype;
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
u_int cim_num_obq = is_t4(sc) ? CIM_NUM_OBQ : CIM_NUM_OBQ_T5;
cxgbe(4): Add sysctls to extract debug information from the chip: dev.t4nex.X.misc.cim_la logic analyzer dump dev.t4nex.X.misc.cim_qcfg queue configuration dev.t4nex.X.misc.cim_ibq_xxx inbound queues dev.t4nex.X.misc.cim_obq_xxx outbound queues Obtained from: Chelsio MFC after: 1 week
2013-02-21 20:13:15 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
KASSERT(qid >= 0 && qid < CIM_NUM_IBQ + cim_num_obq,
cxgbe(4): Add sysctls to extract debug information from the chip: dev.t4nex.X.misc.cim_la logic analyzer dump dev.t4nex.X.misc.cim_qcfg queue configuration dev.t4nex.X.misc.cim_ibq_xxx inbound queues dev.t4nex.X.misc.cim_obq_xxx outbound queues Obtained from: Chelsio MFC after: 1 week
2013-02-21 20:13:15 +00:00
("%s: bad qid %d\n", __func__, qid));
if (qid < CIM_NUM_IBQ) {
/* inbound queue */
qtype = "IBQ";
n = 4 * CIM_IBQ_SIZE;
buf = malloc(n * sizeof(uint32_t), M_CXGBE, M_ZERO | M_WAITOK);
rc = t4_read_cim_ibq(sc, qid, buf, n);
} else {
/* outbound queue */
qtype = "OBQ";
qid -= CIM_NUM_IBQ;
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
n = 4 * cim_num_obq * CIM_OBQ_SIZE;
cxgbe(4): Add sysctls to extract debug information from the chip: dev.t4nex.X.misc.cim_la logic analyzer dump dev.t4nex.X.misc.cim_qcfg queue configuration dev.t4nex.X.misc.cim_ibq_xxx inbound queues dev.t4nex.X.misc.cim_obq_xxx outbound queues Obtained from: Chelsio MFC after: 1 week
2013-02-21 20:13:15 +00:00
buf = malloc(n * sizeof(uint32_t), M_CXGBE, M_ZERO | M_WAITOK);
rc = t4_read_cim_obq(sc, qid, buf, n);
}
if (rc < 0) {
rc = -rc;
goto done;
}
n = rc * sizeof(uint32_t); /* rc has # of words actually read */
rc = sysctl_wire_old_buffer(req, 0);
if (rc != 0)
goto done;
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
sb = sbuf_new_for_sysctl(NULL, NULL, PAGE_SIZE, req);
cxgbe(4): Add sysctls to extract debug information from the chip: dev.t4nex.X.misc.cim_la logic analyzer dump dev.t4nex.X.misc.cim_qcfg queue configuration dev.t4nex.X.misc.cim_ibq_xxx inbound queues dev.t4nex.X.misc.cim_obq_xxx outbound queues Obtained from: Chelsio MFC after: 1 week
2013-02-21 20:13:15 +00:00
if (sb == NULL) {
rc = ENOMEM;
goto done;
}
sbuf_printf(sb, "%s%d %s", qtype , qid, qname[arg2]);
for (i = 0, p = buf; i < n; i += 16, p += 4)
sbuf_printf(sb, "\n%#06x: %08x %08x %08x %08x", i, p[0], p[1],
p[2], p[3]);
rc = sbuf_finish(sb);
sbuf_delete(sb);
done:
free(buf, M_CXGBE);
return (rc);
}
static int
sysctl_cim_la(SYSCTL_HANDLER_ARGS)
{
struct adapter *sc = arg1;
u_int cfg;
struct sbuf *sb;
uint32_t *buf, *p;
int rc;
rc = -t4_cim_read(sc, A_UP_UP_DBG_LA_CFG, 1, &cfg);
if (rc != 0)
return (rc);
rc = sysctl_wire_old_buffer(req, 0);
if (rc != 0)
return (rc);
sb = sbuf_new_for_sysctl(NULL, NULL, 4096, req);
if (sb == NULL)
return (ENOMEM);
buf = malloc(sc->params.cim_la_size * sizeof(uint32_t), M_CXGBE,
M_ZERO | M_WAITOK);
rc = -t4_cim_read_la(sc, buf, NULL);
if (rc != 0)
goto done;
sbuf_printf(sb, "Status Data PC%s",
cfg & F_UPDBGLACAPTPCONLY ? "" :
" LS0Stat LS0Addr LS0Data");
KASSERT((sc->params.cim_la_size & 7) == 0,
("%s: p will walk off the end of buf", __func__));
for (p = buf; p < &buf[sc->params.cim_la_size]; p += 8) {
if (cfg & F_UPDBGLACAPTPCONLY) {
sbuf_printf(sb, "\n %02x %08x %08x", p[5] & 0xff,
p[6], p[7]);
sbuf_printf(sb, "\n %02x %02x%06x %02x%06x",
(p[3] >> 8) & 0xff, p[3] & 0xff, p[4] >> 8,
p[4] & 0xff, p[5] >> 8);
sbuf_printf(sb, "\n %02x %x%07x %x%07x",
(p[0] >> 4) & 0xff, p[0] & 0xf, p[1] >> 4,
p[1] & 0xf, p[2] >> 4);
} else {
sbuf_printf(sb,
"\n %02x %x%07x %x%07x %08x %08x "
"%08x%08x%08x%08x",
(p[0] >> 4) & 0xff, p[0] & 0xf, p[1] >> 4,
p[1] & 0xf, p[2] >> 4, p[2] & 0xf, p[3], p[4], p[5],
p[6], p[7]);
}
}
rc = sbuf_finish(sb);
sbuf_delete(sb);
done:
free(buf, M_CXGBE);
return (rc);
}
static int
sysctl_cim_qcfg(SYSCTL_HANDLER_ARGS)
{
struct adapter *sc = arg1;
struct sbuf *sb;
int rc, i;
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
uint16_t base[CIM_NUM_IBQ + CIM_NUM_OBQ_T5];
uint16_t size[CIM_NUM_IBQ + CIM_NUM_OBQ_T5];
cxgbe(4): Add sysctls to extract debug information from the chip: dev.t4nex.X.misc.cim_la logic analyzer dump dev.t4nex.X.misc.cim_qcfg queue configuration dev.t4nex.X.misc.cim_ibq_xxx inbound queues dev.t4nex.X.misc.cim_obq_xxx outbound queues Obtained from: Chelsio MFC after: 1 week
2013-02-21 20:13:15 +00:00
uint16_t thres[CIM_NUM_IBQ];
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
uint32_t obq_wr[2 * CIM_NUM_OBQ_T5], *wr = obq_wr;
uint32_t stat[4 * (CIM_NUM_IBQ + CIM_NUM_OBQ_T5)], *p = stat;
u_int cim_num_obq, ibq_rdaddr, obq_rdaddr, nq;
if (is_t4(sc)) {
cim_num_obq = CIM_NUM_OBQ;
ibq_rdaddr = A_UP_IBQ_0_RDADDR;
obq_rdaddr = A_UP_OBQ_0_REALADDR;
} else {
cim_num_obq = CIM_NUM_OBQ_T5;
ibq_rdaddr = A_UP_IBQ_0_SHADOW_RDADDR;
obq_rdaddr = A_UP_OBQ_0_SHADOW_REALADDR;
}
nq = CIM_NUM_IBQ + cim_num_obq;
cxgbe(4): Add sysctls to extract debug information from the chip: dev.t4nex.X.misc.cim_la logic analyzer dump dev.t4nex.X.misc.cim_qcfg queue configuration dev.t4nex.X.misc.cim_ibq_xxx inbound queues dev.t4nex.X.misc.cim_obq_xxx outbound queues Obtained from: Chelsio MFC after: 1 week
2013-02-21 20:13:15 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
rc = -t4_cim_read(sc, ibq_rdaddr, 4 * nq, stat);
cxgbe(4): Add sysctls to extract debug information from the chip: dev.t4nex.X.misc.cim_la logic analyzer dump dev.t4nex.X.misc.cim_qcfg queue configuration dev.t4nex.X.misc.cim_ibq_xxx inbound queues dev.t4nex.X.misc.cim_obq_xxx outbound queues Obtained from: Chelsio MFC after: 1 week
2013-02-21 20:13:15 +00:00
if (rc == 0)
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
rc = -t4_cim_read(sc, obq_rdaddr, 2 * cim_num_obq, obq_wr);
cxgbe(4): Add sysctls to extract debug information from the chip: dev.t4nex.X.misc.cim_la logic analyzer dump dev.t4nex.X.misc.cim_qcfg queue configuration dev.t4nex.X.misc.cim_ibq_xxx inbound queues dev.t4nex.X.misc.cim_obq_xxx outbound queues Obtained from: Chelsio MFC after: 1 week
2013-02-21 20:13:15 +00:00
if (rc != 0)
return (rc);
t4_read_cimq_cfg(sc, base, size, thres);
rc = sysctl_wire_old_buffer(req, 0);
if (rc != 0)
return (rc);
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
sb = sbuf_new_for_sysctl(NULL, NULL, PAGE_SIZE, req);
cxgbe(4): Add sysctls to extract debug information from the chip: dev.t4nex.X.misc.cim_la logic analyzer dump dev.t4nex.X.misc.cim_qcfg queue configuration dev.t4nex.X.misc.cim_ibq_xxx inbound queues dev.t4nex.X.misc.cim_obq_xxx outbound queues Obtained from: Chelsio MFC after: 1 week
2013-02-21 20:13:15 +00:00
if (sb == NULL)
return (ENOMEM);
sbuf_printf(sb, "Queue Base Size Thres RdPtr WrPtr SOP EOP Avail");
for (i = 0; i < CIM_NUM_IBQ; i++, p += 4)
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
sbuf_printf(sb, "\n%7s %5x %5u %5u %6x %4x %4u %4u %5u",
cxgbe(4): Add sysctls to extract debug information from the chip: dev.t4nex.X.misc.cim_la logic analyzer dump dev.t4nex.X.misc.cim_qcfg queue configuration dev.t4nex.X.misc.cim_ibq_xxx inbound queues dev.t4nex.X.misc.cim_obq_xxx outbound queues Obtained from: Chelsio MFC after: 1 week
2013-02-21 20:13:15 +00:00
qname[i], base[i], size[i], thres[i], G_IBQRDADDR(p[0]),
G_IBQWRADDR(p[1]), G_QUESOPCNT(p[3]), G_QUEEOPCNT(p[3]),
G_QUEREMFLITS(p[2]) * 16);
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
for ( ; i < nq; i++, p += 4, wr += 2)
sbuf_printf(sb, "\n%7s %5x %5u %12x %4x %4u %4u %5u", qname[i],
cxgbe(4): Add sysctls to extract debug information from the chip: dev.t4nex.X.misc.cim_la logic analyzer dump dev.t4nex.X.misc.cim_qcfg queue configuration dev.t4nex.X.misc.cim_ibq_xxx inbound queues dev.t4nex.X.misc.cim_obq_xxx outbound queues Obtained from: Chelsio MFC after: 1 week
2013-02-21 20:13:15 +00:00
base[i], size[i], G_QUERDADDR(p[0]) & 0x3fff,
wr[0] - base[i], G_QUESOPCNT(p[3]), G_QUEEOPCNT(p[3]),
G_QUEREMFLITS(p[2]) * 16);
rc = sbuf_finish(sb);
sbuf_delete(sb);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return (rc);
}
static int
sysctl_cpl_stats(SYSCTL_HANDLER_ARGS)
{
struct adapter *sc = arg1;
struct sbuf *sb;
int rc;
struct tp_cpl_stats stats;
rc = sysctl_wire_old_buffer(req, 0);
if (rc != 0)
return (rc);
sb = sbuf_new_for_sysctl(NULL, NULL, 256, req);
if (sb == NULL)
return (ENOMEM);
t4_tp_get_cpl_stats(sc, &stats);
sbuf_printf(sb, " channel 0 channel 1 channel 2 "
"channel 3\n");
sbuf_printf(sb, "CPL requests: %10u %10u %10u %10u\n",
stats.req[0], stats.req[1], stats.req[2], stats.req[3]);
sbuf_printf(sb, "CPL responses: %10u %10u %10u %10u",
stats.rsp[0], stats.rsp[1], stats.rsp[2], stats.rsp[3]);
rc = sbuf_finish(sb);
sbuf_delete(sb);
return (rc);
}
static int
sysctl_ddp_stats(SYSCTL_HANDLER_ARGS)
{
struct adapter *sc = arg1;
struct sbuf *sb;
int rc;
struct tp_usm_stats stats;
rc = sysctl_wire_old_buffer(req, 0);
if (rc != 0)
return(rc);
sb = sbuf_new_for_sysctl(NULL, NULL, 256, req);
if (sb == NULL)
return (ENOMEM);
t4_get_usm_stats(sc, &stats);
sbuf_printf(sb, "Frames: %u\n", stats.frames);
sbuf_printf(sb, "Octets: %ju\n", stats.octets);
sbuf_printf(sb, "Drops: %u", stats.drops);
rc = sbuf_finish(sb);
sbuf_delete(sb);
return (rc);
}
Firmware device log. # sysctl dev.t4nex.0.devlog MFC after: mdf's sysctl+sbuf changes are MFC'd
2011-05-31 23:49:13 +00:00
const char *devlog_level_strings[] = {
[FW_DEVLOG_LEVEL_EMERG] = "EMERG",
[FW_DEVLOG_LEVEL_CRIT] = "CRIT",
[FW_DEVLOG_LEVEL_ERR] = "ERR",
[FW_DEVLOG_LEVEL_NOTICE] = "NOTICE",
[FW_DEVLOG_LEVEL_INFO] = "INFO",
[FW_DEVLOG_LEVEL_DEBUG] = "DEBUG"
};
const char *devlog_facility_strings[] = {
[FW_DEVLOG_FACILITY_CORE] = "CORE",
[FW_DEVLOG_FACILITY_SCHED] = "SCHED",
[FW_DEVLOG_FACILITY_TIMER] = "TIMER",
[FW_DEVLOG_FACILITY_RES] = "RES",
[FW_DEVLOG_FACILITY_HW] = "HW",
[FW_DEVLOG_FACILITY_FLR] = "FLR",
[FW_DEVLOG_FACILITY_DMAQ] = "DMAQ",
[FW_DEVLOG_FACILITY_PHY] = "PHY",
[FW_DEVLOG_FACILITY_MAC] = "MAC",
[FW_DEVLOG_FACILITY_PORT] = "PORT",
[FW_DEVLOG_FACILITY_VI] = "VI",
[FW_DEVLOG_FACILITY_FILTER] = "FILTER",
[FW_DEVLOG_FACILITY_ACL] = "ACL",
[FW_DEVLOG_FACILITY_TM] = "TM",
[FW_DEVLOG_FACILITY_QFC] = "QFC",
[FW_DEVLOG_FACILITY_DCB] = "DCB",
[FW_DEVLOG_FACILITY_ETH] = "ETH",
[FW_DEVLOG_FACILITY_OFLD] = "OFLD",
[FW_DEVLOG_FACILITY_RI] = "RI",
[FW_DEVLOG_FACILITY_ISCSI] = "ISCSI",
[FW_DEVLOG_FACILITY_FCOE] = "FCOE",
[FW_DEVLOG_FACILITY_FOISCSI] = "FOISCSI",
[FW_DEVLOG_FACILITY_FOFCOE] = "FOFCOE"
};
static int
sysctl_devlog(SYSCTL_HANDLER_ARGS)
{
struct adapter *sc = arg1;
struct devlog_params *dparams = &sc->params.devlog;
struct fw_devlog_e *buf, *e;
int i, j, rc, nentries, first = 0;
struct sbuf *sb;
uint64_t ftstamp = UINT64_MAX;
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
if (dparams->start == 0) {
dparams->memtype = 0;
dparams->start = 0x84000;
dparams->size = 32768;
}
Firmware device log. # sysctl dev.t4nex.0.devlog MFC after: mdf's sysctl+sbuf changes are MFC'd
2011-05-31 23:49:13 +00:00
nentries = dparams->size / sizeof(struct fw_devlog_e);
buf = malloc(dparams->size, M_CXGBE, M_NOWAIT);
if (buf == NULL)
return (ENOMEM);
rc = -t4_mem_read(sc, dparams->memtype, dparams->start, dparams->size,
(void *)buf);
if (rc != 0)
goto done;
for (i = 0; i < nentries; i++) {
e = &buf[i];
if (e->timestamp == 0)
break; /* end */
e->timestamp = be64toh(e->timestamp);
e->seqno = be32toh(e->seqno);
for (j = 0; j < 8; j++)
e->params[j] = be32toh(e->params[j]);
if (e->timestamp < ftstamp) {
ftstamp = e->timestamp;
first = i;
}
}
if (buf[first].timestamp == 0)
goto done; /* nothing in the log */
rc = sysctl_wire_old_buffer(req, 0);
if (rc != 0)
goto done;
sb = sbuf_new_for_sysctl(NULL, NULL, 4096, req);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (sb == NULL) {
rc = ENOMEM;
goto done;
}
sbuf_printf(sb, "%10s %15s %8s %8s %s\n",
Firmware device log. # sysctl dev.t4nex.0.devlog MFC after: mdf's sysctl+sbuf changes are MFC'd
2011-05-31 23:49:13 +00:00
"Seq#", "Tstamp", "Level", "Facility", "Message");
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
i = first;
do {
e = &buf[i];
if (e->timestamp == 0)
break; /* end */
sbuf_printf(sb, "%10d %15ju %8s %8s ",
e->seqno, e->timestamp,
Use native FreeBSD facilities everywhere except the shared code in common/ MFC after: 1 week
2012-09-13 09:10:10 +00:00
(e->level < nitems(devlog_level_strings) ?
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
devlog_level_strings[e->level] : "UNKNOWN"),
Use native FreeBSD facilities everywhere except the shared code in common/ MFC after: 1 week
2012-09-13 09:10:10 +00:00
(e->facility < nitems(devlog_facility_strings) ?
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
devlog_facility_strings[e->facility] : "UNKNOWN"));
sbuf_printf(sb, e->fmt, e->params[0], e->params[1],
e->params[2], e->params[3], e->params[4],
e->params[5], e->params[6], e->params[7]);
if (++i == nentries)
i = 0;
} while (i != first);
rc = sbuf_finish(sb);
sbuf_delete(sb);
done:
free(buf, M_CXGBE);
return (rc);
}
static int
sysctl_fcoe_stats(SYSCTL_HANDLER_ARGS)
{
struct adapter *sc = arg1;
struct sbuf *sb;
int rc;
struct tp_fcoe_stats stats[4];
rc = sysctl_wire_old_buffer(req, 0);
if (rc != 0)
return (rc);
sb = sbuf_new_for_sysctl(NULL, NULL, 256, req);
if (sb == NULL)
return (ENOMEM);
t4_get_fcoe_stats(sc, 0, &stats[0]);
t4_get_fcoe_stats(sc, 1, &stats[1]);
t4_get_fcoe_stats(sc, 2, &stats[2]);
t4_get_fcoe_stats(sc, 3, &stats[3]);
sbuf_printf(sb, " channel 0 channel 1 "
"channel 2 channel 3\n");
sbuf_printf(sb, "octetsDDP: %16ju %16ju %16ju %16ju\n",
stats[0].octetsDDP, stats[1].octetsDDP, stats[2].octetsDDP,
stats[3].octetsDDP);
sbuf_printf(sb, "framesDDP: %16u %16u %16u %16u\n", stats[0].framesDDP,
stats[1].framesDDP, stats[2].framesDDP, stats[3].framesDDP);
sbuf_printf(sb, "framesDrop: %16u %16u %16u %16u",
stats[0].framesDrop, stats[1].framesDrop, stats[2].framesDrop,
stats[3].framesDrop);
rc = sbuf_finish(sb);
sbuf_delete(sb);
return (rc);
}
static int
sysctl_hw_sched(SYSCTL_HANDLER_ARGS)
{
struct adapter *sc = arg1;
struct sbuf *sb;
int rc, i;
unsigned int map, kbps, ipg, mode;
unsigned int pace_tab[NTX_SCHED];
rc = sysctl_wire_old_buffer(req, 0);
if (rc != 0)
return (rc);
sb = sbuf_new_for_sysctl(NULL, NULL, 256, req);
if (sb == NULL)
return (ENOMEM);
map = t4_read_reg(sc, A_TP_TX_MOD_QUEUE_REQ_MAP);
mode = G_TIMERMODE(t4_read_reg(sc, A_TP_MOD_CONFIG));
t4_read_pace_tbl(sc, pace_tab);
sbuf_printf(sb, "Scheduler Mode Channel Rate (Kbps) "
"Class IPG (0.1 ns) Flow IPG (us)");
for (i = 0; i < NTX_SCHED; ++i, map >>= 2) {
t4_get_tx_sched(sc, i, &kbps, &ipg);
sbuf_printf(sb, "\n %u %-5s %u ", i,
(mode & (1 << i)) ? "flow" : "class", map & 3);
if (kbps)
sbuf_printf(sb, "%9u ", kbps);
else
sbuf_printf(sb, " disabled ");
if (ipg)
sbuf_printf(sb, "%13u ", ipg);
else
sbuf_printf(sb, " disabled ");
if (pace_tab[i])
sbuf_printf(sb, "%10u", pace_tab[i]);
else
sbuf_printf(sb, " disabled");
}
rc = sbuf_finish(sb);
sbuf_delete(sb);
return (rc);
}
static int
sysctl_lb_stats(SYSCTL_HANDLER_ARGS)
{
struct adapter *sc = arg1;
struct sbuf *sb;
int rc, i, j;
uint64_t *p0, *p1;
struct lb_port_stats s[2];
static const char *stat_name[] = {
"OctetsOK:", "FramesOK:", "BcastFrames:", "McastFrames:",
"UcastFrames:", "ErrorFrames:", "Frames64:", "Frames65To127:",
"Frames128To255:", "Frames256To511:", "Frames512To1023:",
"Frames1024To1518:", "Frames1519ToMax:", "FramesDropped:",
"BG0FramesDropped:", "BG1FramesDropped:", "BG2FramesDropped:",
"BG3FramesDropped:", "BG0FramesTrunc:", "BG1FramesTrunc:",
"BG2FramesTrunc:", "BG3FramesTrunc:"
};
rc = sysctl_wire_old_buffer(req, 0);
if (rc != 0)
return (rc);
sb = sbuf_new_for_sysctl(NULL, NULL, 4096, req);
if (sb == NULL)
return (ENOMEM);
memset(s, 0, sizeof(s));
for (i = 0; i < 4; i += 2) {
t4_get_lb_stats(sc, i, &s[0]);
t4_get_lb_stats(sc, i + 1, &s[1]);
p0 = &s[0].octets;
p1 = &s[1].octets;
sbuf_printf(sb, "%s Loopback %u"
" Loopback %u", i == 0 ? "" : "\n", i, i + 1);
Use native FreeBSD facilities everywhere except the shared code in common/ MFC after: 1 week
2012-09-13 09:10:10 +00:00
for (j = 0; j < nitems(stat_name); j++)
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
sbuf_printf(sb, "\n%-17s %20ju %20ju", stat_name[j],
*p0++, *p1++);
}
rc = sbuf_finish(sb);
sbuf_delete(sb);
return (rc);
}
struct mem_desc {
unsigned int base;
unsigned int limit;
unsigned int idx;
};
static int
mem_desc_cmp(const void *a, const void *b)
{
return ((const struct mem_desc *)a)->base -
((const struct mem_desc *)b)->base;
}
static void
mem_region_show(struct sbuf *sb, const char *name, unsigned int from,
unsigned int to)
{
unsigned int size;
size = to - from + 1;
if (size == 0)
return;
/* XXX: need humanize_number(3) in libkern for a more readable 'size' */
sbuf_printf(sb, "%-15s %#x-%#x [%u]\n", name, from, to, size);
}
static int
sysctl_meminfo(SYSCTL_HANDLER_ARGS)
{
struct adapter *sc = arg1;
struct sbuf *sb;
int rc, i, n;
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
uint32_t lo, hi, used, alloc;
static const char *memory[] = {"EDC0:", "EDC1:", "MC:", "MC0:", "MC1:"};
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static const char *region[] = {
"DBQ contexts:", "IMSG contexts:", "FLM cache:", "TCBs:",
"Pstructs:", "Timers:", "Rx FL:", "Tx FL:", "Pstruct FL:",
"Tx payload:", "Rx payload:", "LE hash:", "iSCSI region:",
"TDDP region:", "TPT region:", "STAG region:", "RQ region:",
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
"RQUDP region:", "PBL region:", "TXPBL region:",
"DBVFIFO region:", "ULPRX state:", "ULPTX state:",
"On-chip queues:"
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
};
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
struct mem_desc avail[4];
Use native FreeBSD facilities everywhere except the shared code in common/ MFC after: 1 week
2012-09-13 09:10:10 +00:00
struct mem_desc mem[nitems(region) + 3]; /* up to 3 holes */
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct mem_desc *md = mem;
rc = sysctl_wire_old_buffer(req, 0);
if (rc != 0)
return (rc);
sb = sbuf_new_for_sysctl(NULL, NULL, 4096, req);
if (sb == NULL)
return (ENOMEM);
Use native FreeBSD facilities everywhere except the shared code in common/ MFC after: 1 week
2012-09-13 09:10:10 +00:00
for (i = 0; i < nitems(mem); i++) {
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
mem[i].limit = 0;
mem[i].idx = i;
}
/* Find and sort the populated memory ranges */
i = 0;
lo = t4_read_reg(sc, A_MA_TARGET_MEM_ENABLE);
if (lo & F_EDRAM0_ENABLE) {
hi = t4_read_reg(sc, A_MA_EDRAM0_BAR);
avail[i].base = G_EDRAM0_BASE(hi) << 20;
avail[i].limit = avail[i].base + (G_EDRAM0_SIZE(hi) << 20);
avail[i].idx = 0;
i++;
}
if (lo & F_EDRAM1_ENABLE) {
hi = t4_read_reg(sc, A_MA_EDRAM1_BAR);
avail[i].base = G_EDRAM1_BASE(hi) << 20;
avail[i].limit = avail[i].base + (G_EDRAM1_SIZE(hi) << 20);
avail[i].idx = 1;
i++;
}
if (lo & F_EXT_MEM_ENABLE) {
hi = t4_read_reg(sc, A_MA_EXT_MEMORY_BAR);
avail[i].base = G_EXT_MEM_BASE(hi) << 20;
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
avail[i].limit = avail[i].base +
(G_EXT_MEM_SIZE(hi) << 20);
avail[i].idx = is_t4(sc) ? 2 : 3; /* Call it MC for T4 */
i++;
}
if (!is_t4(sc) && lo & F_EXT_MEM1_ENABLE) {
hi = t4_read_reg(sc, A_MA_EXT_MEMORY1_BAR);
avail[i].base = G_EXT_MEM1_BASE(hi) << 20;
avail[i].limit = avail[i].base +
(G_EXT_MEM1_SIZE(hi) << 20);
avail[i].idx = 4;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
i++;
}
if (!i) /* no memory available */
return 0;
qsort(avail, i, sizeof(struct mem_desc), mem_desc_cmp);
(md++)->base = t4_read_reg(sc, A_SGE_DBQ_CTXT_BADDR);
(md++)->base = t4_read_reg(sc, A_SGE_IMSG_CTXT_BADDR);
(md++)->base = t4_read_reg(sc, A_SGE_FLM_CACHE_BADDR);
(md++)->base = t4_read_reg(sc, A_TP_CMM_TCB_BASE);
(md++)->base = t4_read_reg(sc, A_TP_CMM_MM_BASE);
(md++)->base = t4_read_reg(sc, A_TP_CMM_TIMER_BASE);
(md++)->base = t4_read_reg(sc, A_TP_CMM_MM_RX_FLST_BASE);
(md++)->base = t4_read_reg(sc, A_TP_CMM_MM_TX_FLST_BASE);
(md++)->base = t4_read_reg(sc, A_TP_CMM_MM_PS_FLST_BASE);
/* the next few have explicit upper bounds */
md->base = t4_read_reg(sc, A_TP_PMM_TX_BASE);
md->limit = md->base - 1 +
t4_read_reg(sc, A_TP_PMM_TX_PAGE_SIZE) *
G_PMTXMAXPAGE(t4_read_reg(sc, A_TP_PMM_TX_MAX_PAGE));
md++;
md->base = t4_read_reg(sc, A_TP_PMM_RX_BASE);
md->limit = md->base - 1 +
t4_read_reg(sc, A_TP_PMM_RX_PAGE_SIZE) *
G_PMRXMAXPAGE(t4_read_reg(sc, A_TP_PMM_RX_MAX_PAGE));
md++;
if (t4_read_reg(sc, A_LE_DB_CONFIG) & F_HASHEN) {
hi = t4_read_reg(sc, A_LE_DB_TID_HASHBASE) / 4;
md->base = t4_read_reg(sc, A_LE_DB_HASH_TID_BASE);
md->limit = (sc->tids.ntids - hi) * 16 + md->base - 1;
} else {
md->base = 0;
Use native FreeBSD facilities everywhere except the shared code in common/ MFC after: 1 week
2012-09-13 09:10:10 +00:00
md->idx = nitems(region); /* hide it */
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
}
md++;
#define ulp_region(reg) \
md->base = t4_read_reg(sc, A_ULP_ ## reg ## _LLIMIT);\
(md++)->limit = t4_read_reg(sc, A_ULP_ ## reg ## _ULIMIT)
ulp_region(RX_ISCSI);
ulp_region(RX_TDDP);
ulp_region(TX_TPT);
ulp_region(RX_STAG);
ulp_region(RX_RQ);
ulp_region(RX_RQUDP);
ulp_region(RX_PBL);
ulp_region(TX_PBL);
#undef ulp_region
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
md->base = 0;
md->idx = nitems(region);
if (!is_t4(sc) && t4_read_reg(sc, A_SGE_CONTROL2) & F_VFIFO_ENABLE) {
md->base = G_BASEADDR(t4_read_reg(sc, A_SGE_DBVFIFO_BADDR));
md->limit = md->base + (G_DBVFIFO_SIZE((t4_read_reg(sc,
A_SGE_DBVFIFO_SIZE))) << 2) - 1;
}
md++;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
md->base = t4_read_reg(sc, A_ULP_RX_CTX_BASE);
md->limit = md->base + sc->tids.ntids - 1;
md++;
md->base = t4_read_reg(sc, A_ULP_TX_ERR_TABLE_BASE);
md->limit = md->base + sc->tids.ntids - 1;
md++;
md->base = sc->vres.ocq.start;
if (sc->vres.ocq.size)
md->limit = md->base + sc->vres.ocq.size - 1;
else
Use native FreeBSD facilities everywhere except the shared code in common/ MFC after: 1 week
2012-09-13 09:10:10 +00:00
md->idx = nitems(region); /* hide it */
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
md++;
/* add any address-space holes, there can be up to 3 */
for (n = 0; n < i - 1; n++)
if (avail[n].limit < avail[n + 1].base)
(md++)->base = avail[n].limit;
if (avail[n].limit)
(md++)->base = avail[n].limit;
n = md - mem;
qsort(mem, n, sizeof(struct mem_desc), mem_desc_cmp);
for (lo = 0; lo < i; lo++)
mem_region_show(sb, memory[avail[lo].idx], avail[lo].base,
avail[lo].limit - 1);
sbuf_printf(sb, "\n");
for (i = 0; i < n; i++) {
Use native FreeBSD facilities everywhere except the shared code in common/ MFC after: 1 week
2012-09-13 09:10:10 +00:00
if (mem[i].idx >= nitems(region))
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
continue; /* skip holes */
if (!mem[i].limit)
mem[i].limit = i < n - 1 ? mem[i + 1].base - 1 : ~0;
mem_region_show(sb, region[mem[i].idx], mem[i].base,
mem[i].limit);
}
sbuf_printf(sb, "\n");
lo = t4_read_reg(sc, A_CIM_SDRAM_BASE_ADDR);
hi = t4_read_reg(sc, A_CIM_SDRAM_ADDR_SIZE) + lo - 1;
mem_region_show(sb, "uP RAM:", lo, hi);
lo = t4_read_reg(sc, A_CIM_EXTMEM2_BASE_ADDR);
hi = t4_read_reg(sc, A_CIM_EXTMEM2_ADDR_SIZE) + lo - 1;
mem_region_show(sb, "uP Extmem2:", lo, hi);
lo = t4_read_reg(sc, A_TP_PMM_RX_MAX_PAGE);
sbuf_printf(sb, "\n%u Rx pages of size %uKiB for %u channels\n",
G_PMRXMAXPAGE(lo),
t4_read_reg(sc, A_TP_PMM_RX_PAGE_SIZE) >> 10,
(lo & F_PMRXNUMCHN) ? 2 : 1);
lo = t4_read_reg(sc, A_TP_PMM_TX_MAX_PAGE);
hi = t4_read_reg(sc, A_TP_PMM_TX_PAGE_SIZE);
sbuf_printf(sb, "%u Tx pages of size %u%ciB for %u channels\n",
G_PMTXMAXPAGE(lo),
hi >= (1 << 20) ? (hi >> 20) : (hi >> 10),
hi >= (1 << 20) ? 'M' : 'K', 1 << G_PMTXNUMCHN(lo));
sbuf_printf(sb, "%u p-structs\n",
t4_read_reg(sc, A_TP_CMM_MM_MAX_PSTRUCT));
for (i = 0; i < 4; i++) {
lo = t4_read_reg(sc, A_MPS_RX_PG_RSV0 + i * 4);
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
if (is_t4(sc)) {
used = G_USED(lo);
alloc = G_ALLOC(lo);
} else {
used = G_T5_USED(lo);
alloc = G_T5_ALLOC(lo);
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
sbuf_printf(sb, "\nPort %d using %u pages out of %u allocated",
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
i, used, alloc);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
}
for (i = 0; i < 4; i++) {
lo = t4_read_reg(sc, A_MPS_RX_PG_RSV4 + i * 4);
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
if (is_t4(sc)) {
used = G_USED(lo);
alloc = G_ALLOC(lo);
} else {
used = G_T5_USED(lo);
alloc = G_T5_ALLOC(lo);
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
sbuf_printf(sb,
"\nLoopback %d using %u pages out of %u allocated",
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
i, used, alloc);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
}
rc = sbuf_finish(sb);
sbuf_delete(sb);
return (rc);
}
static int
sysctl_path_mtus(SYSCTL_HANDLER_ARGS)
{
struct adapter *sc = arg1;
struct sbuf *sb;
int rc;
uint16_t mtus[NMTUS];
rc = sysctl_wire_old_buffer(req, 0);
if (rc != 0)
return (rc);
sb = sbuf_new_for_sysctl(NULL, NULL, 256, req);
if (sb == NULL)
return (ENOMEM);
t4_read_mtu_tbl(sc, mtus, NULL);
sbuf_printf(sb, "%u %u %u %u %u %u %u %u %u %u %u %u %u %u %u %u",
mtus[0], mtus[1], mtus[2], mtus[3], mtus[4], mtus[5], mtus[6],
mtus[7], mtus[8], mtus[9], mtus[10], mtus[11], mtus[12], mtus[13],
mtus[14], mtus[15]);
rc = sbuf_finish(sb);
sbuf_delete(sb);
return (rc);
}
static int
sysctl_pm_stats(SYSCTL_HANDLER_ARGS)
{
struct adapter *sc = arg1;
struct sbuf *sb;
int rc, i;
uint32_t tx_cnt[PM_NSTATS], rx_cnt[PM_NSTATS];
uint64_t tx_cyc[PM_NSTATS], rx_cyc[PM_NSTATS];
static const char *pm_stats[] = {
"Read:", "Write bypass:", "Write mem:", "Flush:", "FIFO wait:"
};
rc = sysctl_wire_old_buffer(req, 0);
if (rc != 0)
return (rc);
sb = sbuf_new_for_sysctl(NULL, NULL, 256, req);
if (sb == NULL)
return (ENOMEM);
t4_pmtx_get_stats(sc, tx_cnt, tx_cyc);
t4_pmrx_get_stats(sc, rx_cnt, rx_cyc);
sbuf_printf(sb, " Tx count Tx cycles "
"Rx count Rx cycles");
for (i = 0; i < PM_NSTATS; i++)
sbuf_printf(sb, "\n%-13s %10u %20ju %10u %20ju",
pm_stats[i], tx_cnt[i], tx_cyc[i], rx_cnt[i], rx_cyc[i]);
rc = sbuf_finish(sb);
sbuf_delete(sb);
return (rc);
}
static int
sysctl_rdma_stats(SYSCTL_HANDLER_ARGS)
{
struct adapter *sc = arg1;
struct sbuf *sb;
int rc;
struct tp_rdma_stats stats;
rc = sysctl_wire_old_buffer(req, 0);
if (rc != 0)
return (rc);
sb = sbuf_new_for_sysctl(NULL, NULL, 256, req);
if (sb == NULL)
return (ENOMEM);
t4_tp_get_rdma_stats(sc, &stats);
sbuf_printf(sb, "NoRQEModDefferals: %u\n", stats.rqe_dfr_mod);
sbuf_printf(sb, "NoRQEPktDefferals: %u", stats.rqe_dfr_pkt);
rc = sbuf_finish(sb);
sbuf_delete(sb);
return (rc);
}
static int
sysctl_tcp_stats(SYSCTL_HANDLER_ARGS)
{
struct adapter *sc = arg1;
struct sbuf *sb;
int rc;
struct tp_tcp_stats v4, v6;
rc = sysctl_wire_old_buffer(req, 0);
if (rc != 0)
return (rc);
sb = sbuf_new_for_sysctl(NULL, NULL, 256, req);
if (sb == NULL)
return (ENOMEM);
t4_tp_get_tcp_stats(sc, &v4, &v6);
sbuf_printf(sb,
" IP IPv6\n");
sbuf_printf(sb, "OutRsts: %20u %20u\n",
v4.tcpOutRsts, v6.tcpOutRsts);
sbuf_printf(sb, "InSegs: %20ju %20ju\n",
v4.tcpInSegs, v6.tcpInSegs);
sbuf_printf(sb, "OutSegs: %20ju %20ju\n",
v4.tcpOutSegs, v6.tcpOutSegs);
sbuf_printf(sb, "RetransSegs: %20ju %20ju",
v4.tcpRetransSegs, v6.tcpRetransSegs);
rc = sbuf_finish(sb);
sbuf_delete(sb);
return (rc);
}
static int
sysctl_tids(SYSCTL_HANDLER_ARGS)
{
struct adapter *sc = arg1;
struct sbuf *sb;
int rc;
struct tid_info *t = &sc->tids;
rc = sysctl_wire_old_buffer(req, 0);
if (rc != 0)
return (rc);
sb = sbuf_new_for_sysctl(NULL, NULL, 256, req);
if (sb == NULL)
return (ENOMEM);
if (t->natids) {
sbuf_printf(sb, "ATID range: 0-%u, in use: %u\n", t->natids - 1,
t->atids_in_use);
}
if (t->ntids) {
if (t4_read_reg(sc, A_LE_DB_CONFIG) & F_HASHEN) {
uint32_t b = t4_read_reg(sc, A_LE_DB_SERVER_INDEX) / 4;
if (b) {
sbuf_printf(sb, "TID range: 0-%u, %u-%u", b - 1,
t4_read_reg(sc, A_LE_DB_TID_HASHBASE) / 4,
t->ntids - 1);
} else {
sbuf_printf(sb, "TID range: %u-%u",
t4_read_reg(sc, A_LE_DB_TID_HASHBASE) / 4,
t->ntids - 1);
}
} else
sbuf_printf(sb, "TID range: 0-%u", t->ntids - 1);
sbuf_printf(sb, ", in use: %u\n",
atomic_load_acq_int(&t->tids_in_use));
}
if (t->nstids) {
sbuf_printf(sb, "STID range: %u-%u, in use: %u\n", t->stid_base,
t->stid_base + t->nstids - 1, t->stids_in_use);
}
if (t->nftids) {
sbuf_printf(sb, "FTID range: %u-%u\n", t->ftid_base,
t->ftid_base + t->nftids - 1);
}
sbuf_printf(sb, "HW TID usage: %u IP users, %u IPv6 users",
t4_read_reg(sc, A_LE_DB_ACT_CNT_IPV4),
t4_read_reg(sc, A_LE_DB_ACT_CNT_IPV6));
rc = sbuf_finish(sb);
sbuf_delete(sb);
return (rc);
}
static int
sysctl_tp_err_stats(SYSCTL_HANDLER_ARGS)
{
struct adapter *sc = arg1;
struct sbuf *sb;
int rc;
struct tp_err_stats stats;
rc = sysctl_wire_old_buffer(req, 0);
if (rc != 0)
return (rc);
sb = sbuf_new_for_sysctl(NULL, NULL, 256, req);
if (sb == NULL)
return (ENOMEM);
t4_tp_get_err_stats(sc, &stats);
sbuf_printf(sb, " channel 0 channel 1 channel 2 "
"channel 3\n");
sbuf_printf(sb, "macInErrs: %10u %10u %10u %10u\n",
stats.macInErrs[0], stats.macInErrs[1], stats.macInErrs[2],
stats.macInErrs[3]);
sbuf_printf(sb, "hdrInErrs: %10u %10u %10u %10u\n",
stats.hdrInErrs[0], stats.hdrInErrs[1], stats.hdrInErrs[2],
stats.hdrInErrs[3]);
sbuf_printf(sb, "tcpInErrs: %10u %10u %10u %10u\n",
stats.tcpInErrs[0], stats.tcpInErrs[1], stats.tcpInErrs[2],
stats.tcpInErrs[3]);
sbuf_printf(sb, "tcp6InErrs: %10u %10u %10u %10u\n",
stats.tcp6InErrs[0], stats.tcp6InErrs[1], stats.tcp6InErrs[2],
stats.tcp6InErrs[3]);
sbuf_printf(sb, "tnlCongDrops: %10u %10u %10u %10u\n",
stats.tnlCongDrops[0], stats.tnlCongDrops[1], stats.tnlCongDrops[2],
stats.tnlCongDrops[3]);
sbuf_printf(sb, "tnlTxDrops: %10u %10u %10u %10u\n",
stats.tnlTxDrops[0], stats.tnlTxDrops[1], stats.tnlTxDrops[2],
stats.tnlTxDrops[3]);
sbuf_printf(sb, "ofldVlanDrops: %10u %10u %10u %10u\n",
stats.ofldVlanDrops[0], stats.ofldVlanDrops[1],
stats.ofldVlanDrops[2], stats.ofldVlanDrops[3]);
sbuf_printf(sb, "ofldChanDrops: %10u %10u %10u %10u\n\n",
stats.ofldChanDrops[0], stats.ofldChanDrops[1],
stats.ofldChanDrops[2], stats.ofldChanDrops[3]);
sbuf_printf(sb, "ofldNoNeigh: %u\nofldCongDefer: %u",
stats.ofldNoNeigh, stats.ofldCongDefer);
rc = sbuf_finish(sb);
sbuf_delete(sb);
return (rc);
}
static int
sysctl_tx_rate(SYSCTL_HANDLER_ARGS)
{
struct adapter *sc = arg1;
struct sbuf *sb;
int rc;
u64 nrate[NCHAN], orate[NCHAN];
rc = sysctl_wire_old_buffer(req, 0);
if (rc != 0)
return (rc);
Firmware device log. # sysctl dev.t4nex.0.devlog MFC after: mdf's sysctl+sbuf changes are MFC'd
2011-05-31 23:49:13 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
sb = sbuf_new_for_sysctl(NULL, NULL, 256, req);
if (sb == NULL)
return (ENOMEM);
Firmware device log. # sysctl dev.t4nex.0.devlog MFC after: mdf's sysctl+sbuf changes are MFC'd
2011-05-31 23:49:13 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
t4_get_chan_txrate(sc, nrate, orate);
sbuf_printf(sb, " channel 0 channel 1 channel 2 "
"channel 3\n");
sbuf_printf(sb, "NIC B/s: %10ju %10ju %10ju %10ju\n",
nrate[0], nrate[1], nrate[2], nrate[3]);
sbuf_printf(sb, "Offload B/s: %10ju %10ju %10ju %10ju",
orate[0], orate[1], orate[2], orate[3]);
Firmware device log. # sysctl dev.t4nex.0.devlog MFC after: mdf's sysctl+sbuf changes are MFC'd
2011-05-31 23:49:13 +00:00
rc = sbuf_finish(sb);
sbuf_delete(sb);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
Firmware device log. # sysctl dev.t4nex.0.devlog MFC after: mdf's sysctl+sbuf changes are MFC'd
2011-05-31 23:49:13 +00:00
return (rc);
}
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
static int
Cosmetic change (s/wrwc/wcwr/;s/WRWC/WCWR/). MFC after: 3 days.
2013-04-11 22:49:29 +00:00
sysctl_wcwr_stats(SYSCTL_HANDLER_ARGS)
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
{
struct adapter *sc = arg1;
struct sbuf *sb;
int rc, v;
rc = sysctl_wire_old_buffer(req, 0);
if (rc != 0)
return (rc);
sb = sbuf_new_for_sysctl(NULL, NULL, 4096, req);
if (sb == NULL)
return (ENOMEM);
v = t4_read_reg(sc, A_SGE_STAT_CFG);
if (G_STATSOURCE_T5(v) == 7) {
if (G_STATMODE(v) == 0) {
Get rid of a couple of stray \n's. MFC after: 3 days.
2013-04-11 21:17:49 +00:00
sbuf_printf(sb, "total %d, incomplete %d",
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
t4_read_reg(sc, A_SGE_STAT_TOTAL),
t4_read_reg(sc, A_SGE_STAT_MATCH));
} else if (G_STATMODE(v) == 1) {
Get rid of a couple of stray \n's. MFC after: 3 days.
2013-04-11 21:17:49 +00:00
sbuf_printf(sb, "total %d, data overflow %d",
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
t4_read_reg(sc, A_SGE_STAT_TOTAL),
t4_read_reg(sc, A_SGE_STAT_MATCH));
}
}
rc = sbuf_finish(sb);
sbuf_delete(sb);
return (rc);
}
cxgbe: reduce diffs with other branches. Will help future MFCs from HEAD. MFC after: 3 days
2012-02-07 06:21:59 +00:00
#endif
Firmware device log. # sysctl dev.t4nex.0.devlog MFC after: mdf's sysctl+sbuf changes are MFC'd
2011-05-31 23:49:13 +00:00
Resume tx immediately in response to an SGE egress update from the hardware. MFC after: 1 week
2011-03-05 03:06:38 +00:00
static inline void
txq_start(struct ifnet *ifp, struct sge_txq *txq)
{
struct buf_ring *br;
struct mbuf *m;
TXQ_LOCK_ASSERT_OWNED(txq);
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
br = txq->br;
Resume tx immediately in response to an SGE egress update from the hardware. MFC after: 1 week
2011-03-05 03:06:38 +00:00
m = txq->m ? txq->m : drbr_dequeue(ifp, br);
if (m)
t4_eth_tx(ifp, txq, m);
}
void
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
t4_tx_callout(void *arg)
{
struct sge_eq *eq = arg;
struct adapter *sc;
if (EQ_TRYLOCK(eq) == 0)
goto reschedule;
if (eq->flags & EQ_STALLED && !can_resume_tx(eq)) {
EQ_UNLOCK(eq);
reschedule:
if (__predict_true(!(eq->flags && EQ_DOOMED)))
callout_schedule(&eq->tx_callout, 1);
return;
}
EQ_LOCK_ASSERT_OWNED(eq);
if (__predict_true((eq->flags & EQ_DOOMED) == 0)) {
if ((eq->flags & EQ_TYPEMASK) == EQ_ETH) {
struct sge_txq *txq = arg;
struct port_info *pi = txq->ifp->if_softc;
sc = pi->adapter;
} else {
struct sge_wrq *wrq = arg;
sc = wrq->adapter;
}
taskqueue_enqueue(sc->tq[eq->tx_chan], &eq->tx_task);
}
EQ_UNLOCK(eq);
}
void
t4_tx_task(void *arg, int count)
Resume tx immediately in response to an SGE egress update from the hardware. MFC after: 1 week
2011-03-05 03:06:38 +00:00
{
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct sge_eq *eq = arg;
Resume tx immediately in response to an SGE egress update from the hardware. MFC after: 1 week
2011-03-05 03:06:38 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
EQ_LOCK(eq);
if ((eq->flags & EQ_TYPEMASK) == EQ_ETH) {
struct sge_txq *txq = arg;
Fix a couple of bad races that can occur when a cxgbe interface is taken down. The ingress queue lock was unused and has been removed as part of these changes. - An in-flight egress update from the SGE must be handled before the queue that requested it is destroyed. Wait for the update to arrive. - Interrupt handlers must stop processing rx events for a queue before the queue is destroyed. Events that have not yet been processed should be ignored once the queue disappears. MFC after: 1 week
2011-04-15 03:09:27 +00:00
txq_start(txq->ifp, txq);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
} else {
struct sge_wrq *wrq = arg;
t4_wrq_tx_locked(wrq->adapter, wrq, NULL);
}
EQ_UNLOCK(eq);
Resume tx immediately in response to an SGE egress update from the hardware. MFC after: 1 week
2011-03-05 03:06:38 +00:00
}
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
static uint32_t
fconf_to_mode(uint32_t fconf)
{
uint32_t mode;
mode = T4_FILTER_IPv4 | T4_FILTER_IPv6 | T4_FILTER_IP_SADDR |
T4_FILTER_IP_DADDR | T4_FILTER_IP_SPORT | T4_FILTER_IP_DPORT;
if (fconf & F_FRAGMENTATION)
mode |= T4_FILTER_IP_FRAGMENT;
if (fconf & F_MPSHITTYPE)
mode |= T4_FILTER_MPS_HIT_TYPE;
if (fconf & F_MACMATCH)
mode |= T4_FILTER_MAC_IDX;
if (fconf & F_ETHERTYPE)
mode |= T4_FILTER_ETH_TYPE;
if (fconf & F_PROTOCOL)
mode |= T4_FILTER_IP_PROTO;
if (fconf & F_TOS)
mode |= T4_FILTER_IP_TOS;
if (fconf & F_VLAN)
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
mode |= T4_FILTER_VLAN;
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
if (fconf & F_VNIC_ID)
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
mode |= T4_FILTER_VNIC;
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
if (fconf & F_PORT)
mode |= T4_FILTER_PORT;
if (fconf & F_FCOE)
mode |= T4_FILTER_FCoE;
return (mode);
}
static uint32_t
mode_to_fconf(uint32_t mode)
{
uint32_t fconf = 0;
if (mode & T4_FILTER_IP_FRAGMENT)
fconf |= F_FRAGMENTATION;
if (mode & T4_FILTER_MPS_HIT_TYPE)
fconf |= F_MPSHITTYPE;
if (mode & T4_FILTER_MAC_IDX)
fconf |= F_MACMATCH;
if (mode & T4_FILTER_ETH_TYPE)
fconf |= F_ETHERTYPE;
if (mode & T4_FILTER_IP_PROTO)
fconf |= F_PROTOCOL;
if (mode & T4_FILTER_IP_TOS)
fconf |= F_TOS;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (mode & T4_FILTER_VLAN)
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
fconf |= F_VLAN;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (mode & T4_FILTER_VNIC)
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
fconf |= F_VNIC_ID;
if (mode & T4_FILTER_PORT)
fconf |= F_PORT;
if (mode & T4_FILTER_FCoE)
fconf |= F_FCOE;
return (fconf);
}
static uint32_t
fspec_to_fconf(struct t4_filter_specification *fs)
{
uint32_t fconf = 0;
if (fs->val.frag || fs->mask.frag)
fconf |= F_FRAGMENTATION;
if (fs->val.matchtype || fs->mask.matchtype)
fconf |= F_MPSHITTYPE;
if (fs->val.macidx || fs->mask.macidx)
fconf |= F_MACMATCH;
if (fs->val.ethtype || fs->mask.ethtype)
fconf |= F_ETHERTYPE;
if (fs->val.proto || fs->mask.proto)
fconf |= F_PROTOCOL;
if (fs->val.tos || fs->mask.tos)
fconf |= F_TOS;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (fs->val.vlan_vld || fs->mask.vlan_vld)
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
fconf |= F_VLAN;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (fs->val.vnic_vld || fs->mask.vnic_vld)
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
fconf |= F_VNIC_ID;
if (fs->val.iport || fs->mask.iport)
fconf |= F_PORT;
if (fs->val.fcoe || fs->mask.fcoe)
fconf |= F_FCOE;
return (fconf);
}
static int
get_filter_mode(struct adapter *sc, uint32_t *mode)
{
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
int rc;
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
uint32_t fconf;
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
rc = begin_synchronized_op(sc, NULL, HOLD_LOCK | SLEEP_OK | INTR_OK,
"t4getfm");
if (rc)
return (rc);
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
t4_read_indirect(sc, A_TP_PIO_ADDR, A_TP_PIO_DATA, &fconf, 1,
A_TP_VLAN_PRI_MAP);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (sc->filter_mode != fconf) {
log(LOG_WARNING, "%s: cached filter mode out of sync %x %x.\n",
device_get_nameunit(sc->dev), sc->filter_mode, fconf);
sc->filter_mode = fconf;
}
*mode = fconf_to_mode(sc->filter_mode);
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
end_synchronized_op(sc, LOCK_HELD);
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
return (0);
}
static int
set_filter_mode(struct adapter *sc, uint32_t mode)
{
uint32_t fconf;
int rc;
fconf = mode_to_fconf(mode);
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
rc = begin_synchronized_op(sc, NULL, HOLD_LOCK | SLEEP_OK | INTR_OK,
"t4setfm");
if (rc)
return (rc);
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
if (sc->tids.ftids_in_use > 0) {
rc = EBUSY;
goto done;
}
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (sc->offload_map) {
rc = EBUSY;
goto done;
}
#endif
#ifdef notyet
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
rc = -t4_set_filter_mode(sc, fconf);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (rc == 0)
sc->filter_mode = fconf;
#else
rc = ENOTSUP;
#endif
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
done:
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
end_synchronized_op(sc, LOCK_HELD);
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
return (rc);
}
Provide hit-count with rest of the information about a filter. MFC after: 1 week
2011-06-01 01:32:58 +00:00
static inline uint64_t
get_filter_hits(struct adapter *sc, uint32_t fid)
{
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
uint32_t mw_base, off, tcb_base = t4_read_reg(sc, A_TP_CMM_TCB_BASE);
Provide hit-count with rest of the information about a filter. MFC after: 1 week
2011-06-01 01:32:58 +00:00
uint64_t hits;
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
memwin_info(sc, 0, &mw_base, NULL);
off = position_memwin(sc, 0,
Provide hit-count with rest of the information about a filter. MFC after: 1 week
2011-06-01 01:32:58 +00:00
tcb_base + (fid + sc->tids.ftid_base) * TCB_SIZE);
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
hits = t4_read_reg64(sc, mw_base + off + 16);
Provide hit-count with rest of the information about a filter. MFC after: 1 week
2011-06-01 01:32:58 +00:00
return (be64toh(hits));
}
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
static int
get_filter(struct adapter *sc, struct t4_filter *t)
{
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
int i, rc, nfilters = sc->tids.nftids;
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
struct filter_entry *f;
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
rc = begin_synchronized_op(sc, NULL, HOLD_LOCK | SLEEP_OK | INTR_OK,
"t4getf");
if (rc)
return (rc);
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
if (sc->tids.ftids_in_use == 0 || sc->tids.ftid_tab == NULL ||
t->idx >= nfilters) {
t->idx = 0xffffffff;
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
goto done;
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
}
f = &sc->tids.ftid_tab[t->idx];
for (i = t->idx; i < nfilters; i++, f++) {
if (f->valid) {
t->idx = i;
L2 table code. This is enough to get the T4's switch + L2 rewrite filters working. (All other filters - switch without L2 info rewrite, steer, and drop - were already fully-functional). Some contrived examples of "switch" filters with L2 rewriting: # cxgbetool t4nex0 iport 0 dport 80 action switch vlan +9 eport 3 Intercept all packets received on physical port 0 with TCP port 80 as destination, insert a vlan tag with VID 9, and send them out of port 3. # cxgbetool t4nex0 sip 192.168.1.1/32 ivlan 5 action switch \ vlan =9 smac aa:bb:cc:dd:ee:ff eport 0 Intercept all packets (received on any port) with source IP address 192.168.1.1 and VLAN id 5, rewrite the VLAN id to 9, rewrite source mac to aa:bb:cc:dd:ee:ff, and send it out of port 0. MFC after: 1 week
2011-05-30 21:07:26 +00:00
t->l2tidx = f->l2t ? f->l2t->idx : 0;
t->smtidx = f->smtidx;
Provide hit-count with rest of the information about a filter. MFC after: 1 week
2011-06-01 01:32:58 +00:00
if (f->fs.hitcnts)
t->hits = get_filter_hits(sc, t->idx);
else
t->hits = UINT64_MAX;
L2 table code. This is enough to get the T4's switch + L2 rewrite filters working. (All other filters - switch without L2 info rewrite, steer, and drop - were already fully-functional). Some contrived examples of "switch" filters with L2 rewriting: # cxgbetool t4nex0 iport 0 dport 80 action switch vlan +9 eport 3 Intercept all packets received on physical port 0 with TCP port 80 as destination, insert a vlan tag with VID 9, and send them out of port 3. # cxgbetool t4nex0 sip 192.168.1.1/32 ivlan 5 action switch \ vlan =9 smac aa:bb:cc:dd:ee:ff eport 0 Intercept all packets (received on any port) with source IP address 192.168.1.1 and VLAN id 5, rewrite the VLAN id to 9, rewrite source mac to aa:bb:cc:dd:ee:ff, and send it out of port 0. MFC after: 1 week
2011-05-30 21:07:26 +00:00
t->fs = f->fs;
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
goto done;
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
}
}
t->idx = 0xffffffff;
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
done:
end_synchronized_op(sc, LOCK_HELD);
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
return (0);
}
static int
set_filter(struct adapter *sc, struct t4_filter *t)
{
unsigned int nfilters, nports;
struct filter_entry *f;
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
int i, rc;
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
rc = begin_synchronized_op(sc, NULL, SLEEP_OK | INTR_OK, "t4setf");
if (rc)
return (rc);
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
nfilters = sc->tids.nftids;
nports = sc->params.nports;
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
if (nfilters == 0) {
rc = ENOTSUP;
goto done;
}
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
if (!(sc->flags & FULL_INIT_DONE)) {
rc = EAGAIN;
goto done;
}
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
if (t->idx >= nfilters) {
rc = EINVAL;
goto done;
}
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
/* Validate against the global filter mode */
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
if ((sc->filter_mode | fspec_to_fconf(&t->fs)) != sc->filter_mode) {
rc = E2BIG;
goto done;
}
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
if (t->fs.action == FILTER_SWITCH && t->fs.eport >= nports) {
rc = EINVAL;
goto done;
}
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
if (t->fs.val.iport >= nports) {
rc = EINVAL;
goto done;
}
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
/* Can't specify an iq if not steering to it */
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
if (!t->fs.dirsteer && t->fs.iq) {
rc = EINVAL;
goto done;
}
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
/* IPv6 filter idx must be 4 aligned */
if (t->fs.type == 1 &&
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
((t->idx & 0x3) || t->idx + 4 >= nfilters)) {
rc = EINVAL;
goto done;
}
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
if (sc->tids.ftid_tab == NULL) {
KASSERT(sc->tids.ftids_in_use == 0,
("%s: no memory allocated but filters_in_use > 0",
__func__));
sc->tids.ftid_tab = malloc(sizeof (struct filter_entry) *
nfilters, M_CXGBE, M_NOWAIT | M_ZERO);
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
if (sc->tids.ftid_tab == NULL) {
rc = ENOMEM;
goto done;
}
mtx_init(&sc->tids.ftid_lock, "T4 filters", 0, MTX_DEF);
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
}
for (i = 0; i < 4; i++) {
f = &sc->tids.ftid_tab[t->idx + i];
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
if (f->pending || f->valid) {
rc = EBUSY;
goto done;
}
if (f->locked) {
rc = EPERM;
goto done;
}
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
if (t->fs.type == 0)
break;
}
f = &sc->tids.ftid_tab[t->idx];
f->fs = t->fs;
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
rc = set_filter_wr(sc, t->idx);
done:
end_synchronized_op(sc, 0);
if (rc == 0) {
mtx_lock(&sc->tids.ftid_lock);
for (;;) {
if (f->pending == 0) {
rc = f->valid ? 0 : EIO;
break;
}
if (mtx_sleep(&sc->tids.ftid_tab, &sc->tids.ftid_lock,
PCATCH, "t4setfw", 0)) {
rc = EINPROGRESS;
break;
}
}
mtx_unlock(&sc->tids.ftid_lock);
}
return (rc);
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
}
static int
del_filter(struct adapter *sc, struct t4_filter *t)
{
unsigned int nfilters;
struct filter_entry *f;
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
int rc;
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
rc = begin_synchronized_op(sc, NULL, SLEEP_OK | INTR_OK, "t4delf");
if (rc)
return (rc);
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
nfilters = sc->tids.nftids;
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
if (nfilters == 0) {
rc = ENOTSUP;
goto done;
}
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
if (sc->tids.ftid_tab == NULL || sc->tids.ftids_in_use == 0 ||
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
t->idx >= nfilters) {
rc = EINVAL;
goto done;
}
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
if (!(sc->flags & FULL_INIT_DONE)) {
rc = EAGAIN;
goto done;
}
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
f = &sc->tids.ftid_tab[t->idx];
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
if (f->pending) {
rc = EBUSY;
goto done;
}
if (f->locked) {
rc = EPERM;
goto done;
}
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
if (f->valid) {
t->fs = f->fs; /* extra info for the caller */
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
rc = del_filter_wr(sc, t->idx);
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
}
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
done:
end_synchronized_op(sc, 0);
if (rc == 0) {
mtx_lock(&sc->tids.ftid_lock);
for (;;) {
if (f->pending == 0) {
rc = f->valid ? EIO : 0;
break;
}
if (mtx_sleep(&sc->tids.ftid_tab, &sc->tids.ftid_lock,
PCATCH, "t4delfw", 0)) {
rc = EINPROGRESS;
break;
}
}
mtx_unlock(&sc->tids.ftid_lock);
}
return (rc);
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
}
static void
L2 table code. This is enough to get the T4's switch + L2 rewrite filters working. (All other filters - switch without L2 info rewrite, steer, and drop - were already fully-functional). Some contrived examples of "switch" filters with L2 rewriting: # cxgbetool t4nex0 iport 0 dport 80 action switch vlan +9 eport 3 Intercept all packets received on physical port 0 with TCP port 80 as destination, insert a vlan tag with VID 9, and send them out of port 3. # cxgbetool t4nex0 sip 192.168.1.1/32 ivlan 5 action switch \ vlan =9 smac aa:bb:cc:dd:ee:ff eport 0 Intercept all packets (received on any port) with source IP address 192.168.1.1 and VLAN id 5, rewrite the VLAN id to 9, rewrite source mac to aa:bb:cc:dd:ee:ff, and send it out of port 0. MFC after: 1 week
2011-05-30 21:07:26 +00:00
clear_filter(struct filter_entry *f)
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
{
L2 table code. This is enough to get the T4's switch + L2 rewrite filters working. (All other filters - switch without L2 info rewrite, steer, and drop - were already fully-functional). Some contrived examples of "switch" filters with L2 rewriting: # cxgbetool t4nex0 iport 0 dport 80 action switch vlan +9 eport 3 Intercept all packets received on physical port 0 with TCP port 80 as destination, insert a vlan tag with VID 9, and send them out of port 3. # cxgbetool t4nex0 sip 192.168.1.1/32 ivlan 5 action switch \ vlan =9 smac aa:bb:cc:dd:ee:ff eport 0 Intercept all packets (received on any port) with source IP address 192.168.1.1 and VLAN id 5, rewrite the VLAN id to 9, rewrite source mac to aa:bb:cc:dd:ee:ff, and send it out of port 0. MFC after: 1 week
2011-05-30 21:07:26 +00:00
if (f->l2t)
t4_l2t_release(f->l2t);
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
bzero(f, sizeof (*f));
}
static int
set_filter_wr(struct adapter *sc, int fidx)
{
struct filter_entry *f = &sc->tids.ftid_tab[fidx];
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
struct wrqe *wr;
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
struct fw_filter_wr *fwr;
unsigned int ftid;
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
ASSERT_SYNCHRONIZED_OP(sc);
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
L2 table code. This is enough to get the T4's switch + L2 rewrite filters working. (All other filters - switch without L2 info rewrite, steer, and drop - were already fully-functional). Some contrived examples of "switch" filters with L2 rewriting: # cxgbetool t4nex0 iport 0 dport 80 action switch vlan +9 eport 3 Intercept all packets received on physical port 0 with TCP port 80 as destination, insert a vlan tag with VID 9, and send them out of port 3. # cxgbetool t4nex0 sip 192.168.1.1/32 ivlan 5 action switch \ vlan =9 smac aa:bb:cc:dd:ee:ff eport 0 Intercept all packets (received on any port) with source IP address 192.168.1.1 and VLAN id 5, rewrite the VLAN id to 9, rewrite source mac to aa:bb:cc:dd:ee:ff, and send it out of port 0. MFC after: 1 week
2011-05-30 21:07:26 +00:00
if (f->fs.newdmac || f->fs.newvlan) {
/* This filter needs an L2T entry; allocate one. */
f->l2t = t4_l2t_alloc_switching(sc->l2t);
if (f->l2t == NULL)
return (EAGAIN);
if (t4_l2t_set_switching(sc, f->l2t, f->fs.vlan, f->fs.eport,
f->fs.dmac)) {
t4_l2t_release(f->l2t);
f->l2t = NULL;
return (ENOMEM);
}
}
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
ftid = sc->tids.ftid_base + fidx;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
wr = alloc_wrqe(sizeof(*fwr), &sc->sge.mgmtq);
if (wr == NULL)
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
return (ENOMEM);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
fwr = wrtod(wr);
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
bzero(fwr, sizeof (*fwr));
fwr->op_pkd = htobe32(V_FW_WR_OP(FW_FILTER_WR));
fwr->len16_pkd = htobe32(FW_LEN16(*fwr));
fwr->tid_to_iq =
htobe32(V_FW_FILTER_WR_TID(ftid) |
V_FW_FILTER_WR_RQTYPE(f->fs.type) |
V_FW_FILTER_WR_NOREPLY(0) |
V_FW_FILTER_WR_IQ(f->fs.iq));
fwr->del_filter_to_l2tix =
htobe32(V_FW_FILTER_WR_RPTTID(f->fs.rpttid) |
V_FW_FILTER_WR_DROP(f->fs.action == FILTER_DROP) |
V_FW_FILTER_WR_DIRSTEER(f->fs.dirsteer) |
V_FW_FILTER_WR_MASKHASH(f->fs.maskhash) |
V_FW_FILTER_WR_DIRSTEERHASH(f->fs.dirsteerhash) |
V_FW_FILTER_WR_LPBK(f->fs.action == FILTER_SWITCH) |
V_FW_FILTER_WR_DMAC(f->fs.newdmac) |
V_FW_FILTER_WR_SMAC(f->fs.newsmac) |
V_FW_FILTER_WR_INSVLAN(f->fs.newvlan == VLAN_INSERT ||
f->fs.newvlan == VLAN_REWRITE) |
V_FW_FILTER_WR_RMVLAN(f->fs.newvlan == VLAN_REMOVE ||
f->fs.newvlan == VLAN_REWRITE) |
V_FW_FILTER_WR_HITCNTS(f->fs.hitcnts) |
V_FW_FILTER_WR_TXCHAN(f->fs.eport) |
V_FW_FILTER_WR_PRIO(f->fs.prio) |
L2 table code. This is enough to get the T4's switch + L2 rewrite filters working. (All other filters - switch without L2 info rewrite, steer, and drop - were already fully-functional). Some contrived examples of "switch" filters with L2 rewriting: # cxgbetool t4nex0 iport 0 dport 80 action switch vlan +9 eport 3 Intercept all packets received on physical port 0 with TCP port 80 as destination, insert a vlan tag with VID 9, and send them out of port 3. # cxgbetool t4nex0 sip 192.168.1.1/32 ivlan 5 action switch \ vlan =9 smac aa:bb:cc:dd:ee:ff eport 0 Intercept all packets (received on any port) with source IP address 192.168.1.1 and VLAN id 5, rewrite the VLAN id to 9, rewrite source mac to aa:bb:cc:dd:ee:ff, and send it out of port 0. MFC after: 1 week
2011-05-30 21:07:26 +00:00
V_FW_FILTER_WR_L2TIX(f->l2t ? f->l2t->idx : 0));
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
fwr->ethtype = htobe16(f->fs.val.ethtype);
fwr->ethtypem = htobe16(f->fs.mask.ethtype);
fwr->frag_to_ovlan_vldm =
(V_FW_FILTER_WR_FRAG(f->fs.val.frag) |
V_FW_FILTER_WR_FRAGM(f->fs.mask.frag) |
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
V_FW_FILTER_WR_IVLAN_VLD(f->fs.val.vlan_vld) |
V_FW_FILTER_WR_OVLAN_VLD(f->fs.val.vnic_vld) |
V_FW_FILTER_WR_IVLAN_VLDM(f->fs.mask.vlan_vld) |
V_FW_FILTER_WR_OVLAN_VLDM(f->fs.mask.vnic_vld));
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
fwr->smac_sel = 0;
fwr->rx_chan_rx_rpl_iq = htobe16(V_FW_FILTER_WR_RX_CHAN(0) |
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
V_FW_FILTER_WR_RX_RPL_IQ(sc->sge.fwq.abs_id));
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
fwr->maci_to_matchtypem =
htobe32(V_FW_FILTER_WR_MACI(f->fs.val.macidx) |
V_FW_FILTER_WR_MACIM(f->fs.mask.macidx) |
V_FW_FILTER_WR_FCOE(f->fs.val.fcoe) |
V_FW_FILTER_WR_FCOEM(f->fs.mask.fcoe) |
V_FW_FILTER_WR_PORT(f->fs.val.iport) |
V_FW_FILTER_WR_PORTM(f->fs.mask.iport) |
V_FW_FILTER_WR_MATCHTYPE(f->fs.val.matchtype) |
V_FW_FILTER_WR_MATCHTYPEM(f->fs.mask.matchtype));
fwr->ptcl = f->fs.val.proto;
fwr->ptclm = f->fs.mask.proto;
fwr->ttyp = f->fs.val.tos;
fwr->ttypm = f->fs.mask.tos;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
fwr->ivlan = htobe16(f->fs.val.vlan);
fwr->ivlanm = htobe16(f->fs.mask.vlan);
fwr->ovlan = htobe16(f->fs.val.vnic);
fwr->ovlanm = htobe16(f->fs.mask.vnic);
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
bcopy(f->fs.val.dip, fwr->lip, sizeof (fwr->lip));
bcopy(f->fs.mask.dip, fwr->lipm, sizeof (fwr->lipm));
bcopy(f->fs.val.sip, fwr->fip, sizeof (fwr->fip));
bcopy(f->fs.mask.sip, fwr->fipm, sizeof (fwr->fipm));
fwr->lp = htobe16(f->fs.val.dport);
fwr->lpm = htobe16(f->fs.mask.dport);
fwr->fp = htobe16(f->fs.val.sport);
fwr->fpm = htobe16(f->fs.mask.sport);
if (f->fs.newsmac)
bcopy(f->fs.smac, fwr->sma, sizeof (fwr->sma));
f->pending = 1;
sc->tids.ftids_in_use++;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
t4_wrq_tx(sc, wr);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return (0);
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
}
static int
del_filter_wr(struct adapter *sc, int fidx)
{
struct filter_entry *f = &sc->tids.ftid_tab[fidx];
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
struct wrqe *wr;
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
struct fw_filter_wr *fwr;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
unsigned int ftid;
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
ftid = sc->tids.ftid_base + fidx;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
wr = alloc_wrqe(sizeof(*fwr), &sc->sge.mgmtq);
if (wr == NULL)
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
return (ENOMEM);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
fwr = wrtod(wr);
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
bzero(fwr, sizeof (*fwr));
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
t4_mk_filtdelwr(ftid, fwr, sc->sge.fwq.abs_id);
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
f->pending = 1;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
t4_wrq_tx(sc, wr);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return (0);
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
}
Add a routine (t4_set_tcb_field) to update arbitrary parts of a hardware TCB. Filters are programmed by modifying the TCB too (via a different routine) and the reply to any TCB update is delivered via a CPL_SET_TCB_RPL. Figure out whether the reply is for a filter-write or something else and route it appropriately. MFC after: 2 weeks
2012-08-16 20:15:29 +00:00
int
t4_filter_rpl(struct sge_iq *iq, const struct rss_header *rss, struct mbuf *m)
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
{
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct adapter *sc = iq->adapter;
const struct cpl_set_tcb_rpl *rpl = (const void *)(rss + 1);
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
unsigned int idx = GET_TID(rpl);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
KASSERT(m == NULL, ("%s: payload with opcode %02x", __func__,
rss->opcode));
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
if (idx >= sc->tids.ftid_base &&
(idx -= sc->tids.ftid_base) < sc->tids.nftids) {
unsigned int rc = G_COOKIE(rpl->cookie);
struct filter_entry *f = &sc->tids.ftid_tab[idx];
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
mtx_lock(&sc->tids.ftid_lock);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (rc == FW_FILTER_WR_FLT_ADDED) {
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
KASSERT(f->pending, ("%s: filter[%u] isn't pending.",
__func__, idx));
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
f->smtidx = (be64toh(rpl->oldval) >> 24) & 0xff;
f->pending = 0; /* asynchronous setup completed */
f->valid = 1;
Acquire the adapter lock before updating fields of the filter structure. Submitted by: gnn (different version) MFC after: 3 days
2012-02-07 09:39:46 +00:00
} else {
if (rc != FW_FILTER_WR_FLT_DELETED) {
/* Add or delete failed, display an error */
log(LOG_ERR,
"filter %u setup failed with error %u\n",
idx, rc);
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
Acquire the adapter lock before updating fields of the filter structure. Submitted by: gnn (different version) MFC after: 3 days
2012-02-07 09:39:46 +00:00
clear_filter(f);
sc->tids.ftids_in_use--;
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
}
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
wakeup(&sc->tids.ftid_tab);
mtx_unlock(&sc->tids.ftid_lock);
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return (0);
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
}
- driver ioctl to get SGE context for any given queue. - sysctls to display the context id, cidx, and pidx of all kinds of queues. MFC after: 3 days
2011-06-11 04:50:54 +00:00
static int
get_sge_context(struct adapter *sc, struct t4_sge_context *cntxt)
{
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
int rc;
- driver ioctl to get SGE context for any given queue. - sysctls to display the context id, cidx, and pidx of all kinds of queues. MFC after: 3 days
2011-06-11 04:50:54 +00:00
if (cntxt->cid > M_CTXTQID)
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
return (EINVAL);
- driver ioctl to get SGE context for any given queue. - sysctls to display the context id, cidx, and pidx of all kinds of queues. MFC after: 3 days
2011-06-11 04:50:54 +00:00
if (cntxt->mem_id != CTXT_EGRESS && cntxt->mem_id != CTXT_INGRESS &&
cntxt->mem_id != CTXT_FLM && cntxt->mem_id != CTXT_CNM)
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
return (EINVAL);
- driver ioctl to get SGE context for any given queue. - sysctls to display the context id, cidx, and pidx of all kinds of queues. MFC after: 3 days
2011-06-11 04:50:54 +00:00
Do not hold locks around hardware context reads. MFC after: 3 days
2013-02-09 00:35:28 +00:00
rc = begin_synchronized_op(sc, NULL, SLEEP_OK | INTR_OK, "t4ctxt");
if (rc)
return (rc);
- driver ioctl to get SGE context for any given queue. - sysctls to display the context id, cidx, and pidx of all kinds of queues. MFC after: 3 days
2011-06-11 04:50:54 +00:00
if (sc->flags & FW_OK) {
Do not hold locks around hardware context reads. MFC after: 3 days
2013-02-09 00:35:28 +00:00
rc = -t4_sge_ctxt_rd(sc, sc->mbox, cntxt->cid, cntxt->mem_id,
&cntxt->data[0]);
if (rc == 0)
goto done;
- driver ioctl to get SGE context for any given queue. - sysctls to display the context id, cidx, and pidx of all kinds of queues. MFC after: 3 days
2011-06-11 04:50:54 +00:00
}
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
/*
* Read via firmware failed or wasn't even attempted. Read directly via
* the backdoor.
*/
Do not hold locks around hardware context reads. MFC after: 3 days
2013-02-09 00:35:28 +00:00
rc = -t4_sge_ctxt_rd_bd(sc, cntxt->cid, cntxt->mem_id, &cntxt->data[0]);
done:
end_synchronized_op(sc, 0);
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
return (rc);
}
static int
load_fw(struct adapter *sc, struct t4_data *fw)
{
int rc;
uint8_t *fw_data;
- driver ioctl to get SGE context for any given queue. - sysctls to display the context id, cidx, and pidx of all kinds of queues. MFC after: 3 days
2011-06-11 04:50:54 +00:00
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
rc = begin_synchronized_op(sc, NULL, SLEEP_OK | INTR_OK, "t4ldfw");
if (rc)
return (rc);
if (sc->flags & FULL_INIT_DONE) {
rc = EBUSY;
goto done;
- driver ioctl to get SGE context for any given queue. - sysctls to display the context id, cidx, and pidx of all kinds of queues. MFC after: 3 days
2011-06-11 04:50:54 +00:00
}
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
fw_data = malloc(fw->len, M_CXGBE, M_WAITOK);
if (fw_data == NULL) {
rc = ENOMEM;
goto done;
}
rc = copyin(fw->data, fw_data, fw->len);
if (rc == 0)
rc = -t4_load_fw(sc, fw_data, fw->len);
free(fw_data, M_CXGBE);
done:
end_synchronized_op(sc, 0);
- driver ioctl to get SGE context for any given queue. - sysctls to display the context id, cidx, and pidx of all kinds of queues. MFC after: 3 days
2011-06-11 04:50:54 +00:00
return (rc);
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
read_card_mem(struct adapter *sc, int win, struct t4_mem_range *mr)
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
{
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
uint32_t addr, off, remaining, i, n;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
uint32_t *buf, *b;
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
uint32_t mw_base, mw_aperture;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
int rc;
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
uint8_t *dst;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
rc = validate_mem_range(sc, mr->addr, mr->len);
if (rc != 0)
return (rc);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
memwin_info(sc, win, &mw_base, &mw_aperture);
buf = b = malloc(min(mr->len, mw_aperture), M_CXGBE, M_WAITOK);
addr = mr->addr;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
remaining = mr->len;
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
dst = (void *)mr->data;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
while (remaining) {
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
off = position_memwin(sc, win, addr);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/* number of bytes that we'll copy in the inner loop */
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
n = min(remaining, mw_aperture - off);
for (i = 0; i < n; i += 4)
*b++ = t4_read_reg(sc, mw_base + off + i);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
rc = copyout(buf, dst, n);
if (rc != 0)
break;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
b = buf;
dst += n;
remaining -= n;
addr += n;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
}
free(buf, M_CXGBE);
return (rc);
}
Add a driver ioctl to read a byte from any device on a port's i2c bus. This lets userspace read arbitrary information from the SFP+ modules etc. on this bus. Reading multiple bytes in the same transaction isn't possible right now. I'll update the driver once the chip's firmware supports this. MFC after: 3 days
2012-10-10 17:13:46 +00:00
static int
read_i2c(struct adapter *sc, struct t4_i2c_data *i2cd)
{
int rc;
if (i2cd->len == 0 || i2cd->port_id >= sc->params.nports)
return (EINVAL);
if (i2cd->len > 1) {
/* XXX: need fw support for longer reads in one go */
return (ENOTSUP);
}
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
rc = begin_synchronized_op(sc, NULL, SLEEP_OK | INTR_OK, "t4i2crd");
if (rc)
return (rc);
Add a driver ioctl to read a byte from any device on a port's i2c bus. This lets userspace read arbitrary information from the SFP+ modules etc. on this bus. Reading multiple bytes in the same transaction isn't possible right now. I'll update the driver once the chip's firmware supports this. MFC after: 3 days
2012-10-10 17:13:46 +00:00
rc = -t4_i2c_rd(sc, sc->mbox, i2cd->port_id, i2cd->dev_addr,
i2cd->offset, &i2cd->data[0]);
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
end_synchronized_op(sc, 0);
Add a driver ioctl to read a byte from any device on a port's i2c bus. This lets userspace read arbitrary information from the SFP+ modules etc. on this bus. Reading multiple bytes in the same transaction isn't possible right now. I'll update the driver once the chip's firmware supports this. MFC after: 3 days
2012-10-10 17:13:46 +00:00
return (rc);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
int
t4_os_find_pci_capability(struct adapter *sc, int cap)
{
Simplify t4_os_find_pci_capability. MFC after: 3 days
2011-05-19 19:37:41 +00:00
int i;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Simplify t4_os_find_pci_capability. MFC after: 3 days
2011-05-19 19:37:41 +00:00
return (pci_find_cap(sc->dev, cap, &i) == 0 ? i : 0);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
int
t4_os_pci_save_state(struct adapter *sc)
{
device_t dev;
struct pci_devinfo *dinfo;
dev = sc->dev;
dinfo = device_get_ivars(dev);
pci_cfg_save(dev, dinfo, 0);
return (0);
}
int
t4_os_pci_restore_state(struct adapter *sc)
{
device_t dev;
struct pci_devinfo *dinfo;
dev = sc->dev;
dinfo = device_get_ivars(dev);
pci_cfg_restore(dev, dinfo);
return (0);
}
Be sure to stay within the bounds of the mod_str array when displaying the transceiver type.
2011-03-05 04:19:38 +00:00
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
void
t4_os_portmod_changed(const struct adapter *sc, int idx)
{
struct port_info *pi = sc->port[idx];
static const char *mod_str[] = {
Update header and related code for firmware 1.3.8 MFC after: 3 days
2011-04-01 00:40:24 +00:00
NULL, "LR", "SR", "ER", "TWINAX", "active TWINAX", "LRM"
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
};
if (pi->mod_type == FW_PORT_MOD_TYPE_NONE)
if_printf(pi->ifp, "transceiver unplugged.\n");
Update header and related code for firmware 1.3.8 MFC after: 3 days
2011-04-01 00:40:24 +00:00
else if (pi->mod_type == FW_PORT_MOD_TYPE_UNKNOWN)
if_printf(pi->ifp, "unknown transceiver inserted.\n");
else if (pi->mod_type == FW_PORT_MOD_TYPE_NOTSUPPORTED)
if_printf(pi->ifp, "unsupported transceiver inserted.\n");
Use native FreeBSD facilities everywhere except the shared code in common/ MFC after: 1 week
2012-09-13 09:10:10 +00:00
else if (pi->mod_type > 0 && pi->mod_type < nitems(mod_str)) {
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if_printf(pi->ifp, "%s transceiver inserted.\n",
mod_str[pi->mod_type]);
Be sure to stay within the bounds of the mod_str array when displaying the transceiver type.
2011-03-05 04:19:38 +00:00
} else {
if_printf(pi->ifp, "transceiver (type %d) inserted.\n",
pi->mod_type);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
void
t4_os_link_changed(struct adapter *sc, int idx, int link_stat)
{
struct port_info *pi = sc->port[idx];
struct ifnet *ifp = pi->ifp;
if (link_stat) {
ifp->if_baudrate = IF_Mbps(pi->link_cfg.speed);
if_link_state_change(ifp, LINK_STATE_UP);
} else
if_link_state_change(ifp, LINK_STATE_DOWN);
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
void
t4_iterate(void (*func)(struct adapter *, void *), void *arg)
{
struct adapter *sc;
mtx_lock(&t4_list_lock);
SLIST_FOREACH(sc, &t4_list, link) {
/*
* func should not make any assumptions about what state sc is
* in - the only guarantee is that sc->sc_lock is a valid lock.
*/
func(sc, arg);
}
mtx_unlock(&t4_list_lock);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static int
t4_open(struct cdev *dev, int flags, int type, struct thread *td)
{
return (0);
}
static int
t4_close(struct cdev *dev, int flags, int type, struct thread *td)
{
return (0);
}
static int
t4_ioctl(struct cdev *dev, unsigned long cmd, caddr_t data, int fflag,
struct thread *td)
{
int rc;
struct adapter *sc = dev->si_drv1;
rc = priv_check(td, PRIV_DRIVER);
if (rc != 0)
return (rc);
switch (cmd) {
Modify read/write ioctls to work with 64 bit registers too. MFC after: 3 days
2011-04-07 07:10:42 +00:00
case CHELSIO_T4_GETREG: {
struct t4_reg *edata = (struct t4_reg *)data;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if ((edata->addr & 0x3) != 0 || edata->addr >= sc->mmio_len)
return (EFAULT);
Modify read/write ioctls to work with 64 bit registers too. MFC after: 3 days
2011-04-07 07:10:42 +00:00
if (edata->size == 4)
edata->val = t4_read_reg(sc, edata->addr);
else if (edata->size == 8)
edata->val = t4_read_reg64(sc, edata->addr);
else
return (EINVAL);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
break;
}
Modify read/write ioctls to work with 64 bit registers too. MFC after: 3 days
2011-04-07 07:10:42 +00:00
case CHELSIO_T4_SETREG: {
struct t4_reg *edata = (struct t4_reg *)data;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if ((edata->addr & 0x3) != 0 || edata->addr >= sc->mmio_len)
return (EFAULT);
Modify read/write ioctls to work with 64 bit registers too. MFC after: 3 days
2011-04-07 07:10:42 +00:00
if (edata->size == 4) {
if (edata->val & 0xffffffff00000000)
return (EINVAL);
t4_write_reg(sc, edata->addr, (uint32_t) edata->val);
} else if (edata->size == 8)
t4_write_reg64(sc, edata->addr, edata->val);
else
return (EINVAL);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
break;
}
case CHELSIO_T4_REGDUMP: {
struct t4_regdump *regs = (struct t4_regdump *)data;
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
int reglen = is_t4(sc) ? T4_REGDUMP_SIZE : T5_REGDUMP_SIZE;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
uint8_t *buf;
if (regs->len < reglen) {
regs->len = reglen; /* hint to the caller */
return (ENOBUFS);
}
regs->len = reglen;
buf = malloc(reglen, M_CXGBE, M_WAITOK | M_ZERO);
t4_get_regs(sc, regs, buf);
rc = copyout(buf, regs->data, reglen);
free(buf, M_CXGBE);
break;
}
T4 packet filtering/steering. - Enable 5-tuple and every-packet lookup. - Setup the default filter mode to allow filtering/steering based on IP protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match type; all combined together. You can also filter based on MAC index, Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll have to modify the default filter mode and exclude some of the match-fields in it. IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter rules. - Add driver ioctls to get/set the global filter mode. - Add driver ioctls to program and delete hardware filters. A couple of the "switch" actions that rewrite Ethernet and VLAN information and switch the packet out of another port may not work as the L2 code is not yet in place. Everything else, including all "drop" and "pass" rules with RSS or absolute qid, should work. Obtained from: Chelsio Communications
2011-05-05 02:04:56 +00:00
case CHELSIO_T4_GET_FILTER_MODE:
rc = get_filter_mode(sc, (uint32_t *)data);
break;
case CHELSIO_T4_SET_FILTER_MODE:
rc = set_filter_mode(sc, *(uint32_t *)data);
break;
case CHELSIO_T4_GET_FILTER:
rc = get_filter(sc, (struct t4_filter *)data);
break;
case CHELSIO_T4_SET_FILTER:
rc = set_filter(sc, (struct t4_filter *)data);
break;
case CHELSIO_T4_DEL_FILTER:
rc = del_filter(sc, (struct t4_filter *)data);
break;
- driver ioctl to get SGE context for any given queue. - sysctls to display the context id, cidx, and pidx of all kinds of queues. MFC after: 3 days
2011-06-11 04:50:54 +00:00
case CHELSIO_T4_GET_SGE_CONTEXT:
rc = get_sge_context(sc, (struct t4_sge_context *)data);
break;
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
case CHELSIO_T4_LOAD_FW:
rc = load_fw(sc, (struct t4_data *)data);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
break;
case CHELSIO_T4_GET_MEM:
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
rc = read_card_mem(sc, 2, (struct t4_mem_range *)data);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
break;
Add a driver ioctl to read a byte from any device on a port's i2c bus. This lets userspace read arbitrary information from the SFP+ modules etc. on this bus. Reading multiple bytes in the same transaction isn't possible right now. I'll update the driver once the chip's firmware supports this. MFC after: 3 days
2012-10-10 17:13:46 +00:00
case CHELSIO_T4_GET_I2C:
rc = read_i2c(sc, (struct t4_i2c_data *)data);
break;
Add a driver ioctl to clear a port's MAC statistics. Submitted by: gnn@ MFC after: 3 days
2012-10-10 19:27:40 +00:00
case CHELSIO_T4_CLEAR_STATS: {
cxgbe: Do a more thorough job in the CLEAR_STATS ioctl. MFC after: 3 days
2013-01-16 23:49:55 +00:00
int i;
Add a driver ioctl to clear a port's MAC statistics. Submitted by: gnn@ MFC after: 3 days
2012-10-10 19:27:40 +00:00
u_int port_id = *(uint32_t *)data;
cxgbe: Do a more thorough job in the CLEAR_STATS ioctl. MFC after: 3 days
2013-01-16 23:49:55 +00:00
struct port_info *pi;
Add a driver ioctl to clear a port's MAC statistics. Submitted by: gnn@ MFC after: 3 days
2012-10-10 19:27:40 +00:00
if (port_id >= sc->params.nports)
return (EINVAL);
cxgbe: Do a more thorough job in the CLEAR_STATS ioctl. MFC after: 3 days
2013-01-16 23:49:55 +00:00
/* MAC stats */
Add a driver ioctl to clear a port's MAC statistics. Submitted by: gnn@ MFC after: 3 days
2012-10-10 19:27:40 +00:00
t4_clr_port_stats(sc, port_id);
cxgbe: Do a more thorough job in the CLEAR_STATS ioctl. MFC after: 3 days
2013-01-16 23:49:55 +00:00
pi = sc->port[port_id];
if (pi->flags & PORT_INIT_DONE) {
struct sge_rxq *rxq;
struct sge_txq *txq;
struct sge_wrq *wrq;
for_each_rxq(pi, i, rxq) {
#if defined(INET) || defined(INET6)
rxq->lro.lro_queued = 0;
rxq->lro.lro_flushed = 0;
#endif
rxq->rxcsum = 0;
rxq->vlan_extraction = 0;
}
for_each_txq(pi, i, txq) {
txq->txcsum = 0;
txq->tso_wrs = 0;
txq->vlan_insertion = 0;
txq->imm_wrs = 0;
txq->sgl_wrs = 0;
txq->txpkt_wrs = 0;
txq->txpkts_wrs = 0;
txq->txpkts_pkts = 0;
Provide a statistic to track the number of drops in each of the port's txq's buf_ring. The aggregate for all the queues of a port is already provided in ifnet->if_snd.ifq_drops. MFC after: 3 days.
2013-01-29 20:59:22 +00:00
txq->br->br_drops = 0;
cxgbe: Do a more thorough job in the CLEAR_STATS ioctl. MFC after: 3 days
2013-01-16 23:49:55 +00:00
txq->no_dmamap = 0;
txq->no_desc = 0;
}
#ifdef TCP_OFFLOAD
/* nothing to clear for each ofld_rxq */
for_each_ofld_txq(pi, i, wrq) {
wrq->tx_wrs = 0;
wrq->no_desc = 0;
}
#endif
wrq = &sc->sge.ctrlq[pi->port_id];
wrq->tx_wrs = 0;
wrq->no_desc = 0;
}
Add a driver ioctl to clear a port's MAC statistics. Submitted by: gnn@ MFC after: 3 days
2012-10-10 19:27:40 +00:00
break;
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
default:
rc = EINVAL;
}
return (rc);
}
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int
toe_capability(struct port_info *pi, int enable)
{
int rc;
struct adapter *sc = pi->adapter;
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
ASSERT_SYNCHRONIZED_OP(sc);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (!is_offload(sc))
return (ENODEV);
if (enable) {
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
if (!(sc->flags & FULL_INIT_DONE)) {
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
rc = cxgbe_init_synchronized(pi);
if (rc)
return (rc);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (isset(&sc->offload_map, pi->port_id))
return (0);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
if (!(sc->flags & TOM_INIT_DONE)) {
rc = t4_activate_uld(sc, ULD_TOM);
if (rc == EAGAIN) {
log(LOG_WARNING,
"You must kldload t4_tom.ko before trying "
"to enable TOE on a cxgbe interface.\n");
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (rc != 0)
return (rc);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
KASSERT(sc->tom_softc != NULL,
("%s: TOM activated but softc NULL", __func__));
KASSERT(sc->flags & TOM_INIT_DONE,
("%s: TOM activated but flag not set", __func__));
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
}
setbit(&sc->offload_map, pi->port_id);
} else {
if (!isset(&sc->offload_map, pi->port_id))
return (0);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
KASSERT(sc->flags & TOM_INIT_DONE,
("%s: TOM never initialized?", __func__));
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
clrbit(&sc->offload_map, pi->port_id);
}
return (0);
}
/*
* Add an upper layer driver to the global list.
*/
int
t4_register_uld(struct uld_info *ui)
{
int rc = 0;
struct uld_info *u;
mtx_lock(&t4_uld_list_lock);
SLIST_FOREACH(u, &t4_uld_list, link) {
if (u->uld_id == ui->uld_id) {
rc = EEXIST;
goto done;
}
}
SLIST_INSERT_HEAD(&t4_uld_list, ui, link);
ui->refcount = 0;
done:
mtx_unlock(&t4_uld_list_lock);
return (rc);
}
int
t4_unregister_uld(struct uld_info *ui)
{
int rc = EINVAL;
struct uld_info *u;
mtx_lock(&t4_uld_list_lock);
SLIST_FOREACH(u, &t4_uld_list, link) {
if (u == ui) {
if (ui->refcount > 0) {
rc = EBUSY;
goto done;
}
SLIST_REMOVE(&t4_uld_list, ui, uld_info, link);
rc = 0;
goto done;
}
}
done:
mtx_unlock(&t4_uld_list_lock);
return (rc);
}
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
int
t4_activate_uld(struct adapter *sc, int id)
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
{
int rc = EAGAIN;
struct uld_info *ui;
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
ASSERT_SYNCHRONIZED_OP(sc);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
mtx_lock(&t4_uld_list_lock);
SLIST_FOREACH(ui, &t4_uld_list, link) {
if (ui->uld_id == id) {
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
rc = ui->activate(sc);
if (rc == 0)
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
ui->refcount++;
goto done;
}
}
done:
mtx_unlock(&t4_uld_list_lock);
return (rc);
}
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
int
t4_deactivate_uld(struct adapter *sc, int id)
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
{
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
int rc = EINVAL;
struct uld_info *ui;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4): Add functions to help synchronize "slow" operations (those not on the fast data path) and use them instead of frobbing the adapter lock and busy flag directly. Other changes made while reworking all slow operations: - Wait for the reply to a filter request (add/delete). This guarantees that the operation is complete by the time the ioctl returns. - Tidy up the tid_info structure. - Do not allow the tx queue size to be set to something that's not a power of 2. MFC after: 1 week
2013-01-10 23:56:50 +00:00
ASSERT_SYNCHRONIZED_OP(sc);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
mtx_lock(&t4_uld_list_lock);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
SLIST_FOREACH(ui, &t4_uld_list, link) {
if (ui->uld_id == id) {
rc = ui->deactivate(sc);
if (rc == 0)
ui->refcount--;
goto done;
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
}
done:
mtx_unlock(&t4_uld_list_lock);
return (rc);
}
#endif
/*
* Come up with reasonable defaults for some of the tunables, provided they're
* not set by the user (in which case we'll use the values as is).
*/
static void
tweak_tunables(void)
{
int nc = mp_ncpus; /* our snapshot of the number of CPUs */
if (t4_ntxq10g < 1)
t4_ntxq10g = min(nc, NTXQ_10G);
if (t4_ntxq1g < 1)
t4_ntxq1g = min(nc, NTXQ_1G);
if (t4_nrxq10g < 1)
t4_nrxq10g = min(nc, NRXQ_10G);
if (t4_nrxq1g < 1)
t4_nrxq1g = min(nc, NRXQ_1G);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (t4_nofldtxq10g < 1)
t4_nofldtxq10g = min(nc, NOFLDTXQ_10G);
if (t4_nofldtxq1g < 1)
t4_nofldtxq1g = min(nc, NOFLDTXQ_1G);
if (t4_nofldrxq10g < 1)
t4_nofldrxq10g = min(nc, NOFLDRXQ_10G);
if (t4_nofldrxq1g < 1)
t4_nofldrxq1g = min(nc, NOFLDRXQ_1G);
Instruct the firmware not to provision resources for TCP offload if the kernel is being built without TCP_OFFLOAD. But never override toecaps_allowed if it has been set manually.
2012-07-02 20:42:43 +00:00
if (t4_toecaps_allowed == -1)
t4_toecaps_allowed = FW_CAPS_CONFIG_TOE;
#else
if (t4_toecaps_allowed == -1)
t4_toecaps_allowed = 0;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
#endif
if (t4_tmr_idx_10g < 0 || t4_tmr_idx_10g >= SGE_NTIMERS)
t4_tmr_idx_10g = TMR_IDX_10G;
if (t4_pktc_idx_10g < -1 || t4_pktc_idx_10g >= SGE_NCOUNTERS)
t4_pktc_idx_10g = PKTC_IDX_10G;
if (t4_tmr_idx_1g < 0 || t4_tmr_idx_1g >= SGE_NTIMERS)
t4_tmr_idx_1g = TMR_IDX_1G;
if (t4_pktc_idx_1g < -1 || t4_pktc_idx_1g >= SGE_NCOUNTERS)
t4_pktc_idx_1g = PKTC_IDX_1G;
if (t4_qsize_txq < 128)
t4_qsize_txq = 128;
if (t4_qsize_rxq < 128)
t4_qsize_rxq = 128;
while (t4_qsize_rxq & 7)
t4_qsize_rxq++;
t4_intr_types &= INTR_MSIX | INTR_MSI | INTR_INTX;
}
cxgbe shouldn't directly know of the UMA zones where network buffers come from. MFC after: 1 week
2011-03-08 03:04:07 +00:00
static int
cxgbe(4): Ensure that the MOD_LOAD handler runs before either t4nex or t5nex attach to their devices. MFC after: 3 days
2013-04-11 17:50:50 +00:00
mod_event(module_t mod, int cmd, void *arg)
cxgbe shouldn't directly know of the UMA zones where network buffers come from. MFC after: 1 week
2011-03-08 03:04:07 +00:00
{
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
int rc = 0;
cxgbe(4): Ensure that the MOD_LOAD handler runs before either t4nex or t5nex attach to their devices. MFC after: 3 days
2013-04-11 17:50:50 +00:00
static int loaded = 0;
cxgbe shouldn't directly know of the UMA zones where network buffers come from. MFC after: 1 week
2011-03-08 03:04:07 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
switch (cmd) {
case MOD_LOAD:
cxgbe(4): Ensure that the MOD_LOAD handler runs before either t4nex or t5nex attach to their devices. MFC after: 3 days
2013-04-11 17:50:50 +00:00
if (atomic_fetchadd_int(&loaded, 1))
break;
cxgbe shouldn't directly know of the UMA zones where network buffers come from. MFC after: 1 week
2011-03-08 03:04:07 +00:00
t4_sge_modload();
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
mtx_init(&t4_list_lock, "T4 adapters", 0, MTX_DEF);
SLIST_INIT(&t4_list);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
mtx_init(&t4_uld_list_lock, "T4 ULDs", 0, MTX_DEF);
SLIST_INIT(&t4_uld_list);
#endif
tweak_tunables();
break;
cxgbe shouldn't directly know of the UMA zones where network buffers come from. MFC after: 1 week
2011-03-08 03:04:07 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
case MOD_UNLOAD:
cxgbe(4): Ensure that the MOD_LOAD handler runs before either t4nex or t5nex attach to their devices. MFC after: 3 days
2013-04-11 17:50:50 +00:00
if (atomic_fetchadd_int(&loaded, -1) > 1)
break;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
mtx_lock(&t4_uld_list_lock);
if (!SLIST_EMPTY(&t4_uld_list)) {
rc = EBUSY;
mtx_unlock(&t4_uld_list_lock);
break;
}
mtx_unlock(&t4_uld_list_lock);
mtx_destroy(&t4_uld_list_lock);
#endif
mtx_lock(&t4_list_lock);
if (!SLIST_EMPTY(&t4_list)) {
rc = EBUSY;
mtx_unlock(&t4_list_lock);
break;
}
mtx_unlock(&t4_list_lock);
mtx_destroy(&t4_list_lock);
break;
}
return (rc);
cxgbe shouldn't directly know of the UMA zones where network buffers come from. MFC after: 1 week
2011-03-08 03:04:07 +00:00
}
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
static devclass_t t4_devclass, t5_devclass;
static devclass_t cxgbe_devclass, cxl_devclass;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Ensure that the MOD_LOAD handler runs before either t4nex or t5nex attach to their devices. MFC after: 3 days
2013-04-11 17:50:50 +00:00
DRIVER_MODULE(t4nex, pci, t4_driver, t4_devclass, mod_event, 0);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
MODULE_VERSION(t4nex, 1);
cxgbe(4): Ensure that the MOD_LOAD handler runs before either t4nex or t5nex attach to their devices. MFC after: 3 days
2013-04-11 17:50:50 +00:00
DRIVER_MODULE(t5nex, pci, t5_driver, t5_devclass, mod_event, 0);
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
MODULE_VERSION(t5nex, 1);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
DRIVER_MODULE(cxgbe, t4nex, cxgbe_driver, cxgbe_devclass, 0, 0);
MODULE_VERSION(cxgbe, 1);
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
DRIVER_MODULE(cxl, t5nex, cxl_driver, cxl_devclass, 0, 0);
MODULE_VERSION(cxl, 1);
Reference in New Issue Copy Permalink