freebsd-dev/sys/mips/conf/AR71XX.hints

# $FreeBSD$
hint.apb.0.at="nexus0"
hint.apb.0.irq=4

# uart0
hint.uart.0.at="apb0"
# see atheros/uart_cpu_ar71xx.c why +3
hint.uart.0.maddr=0x18020003
hint.uart.0.msize=0x18
hint.uart.0.irq=3

#ohci
hint.ohci.0.at="apb0"
hint.ohci.0.maddr=0x1c000000
hint.ohci.0.msize=0x01000000
hint.ohci.0.irq=6

#ehci
hint.ehci.0.at="nexus0"
hint.ehci.0.maddr=0x1b000000
hint.ehci.0.msize=0x01000000
hint.ehci.0.irq=1

# pci
hint.pcib.0.at="nexus0"
hint.pcib.0.irq=0

hint.arge.0.at="nexus0"
hint.arge.0.maddr=0x19000000
hint.arge.0.msize=0x1000
hint.arge.0.irq=2
# PHY4 = 1 << 4
hint.arge.0.phymask=0x10
# Uncomment this hint for RS (not PRO)
# PHY20 = 1 << 20
# hint.arge.0.phymask=0x100000

hint.arge.1.at="nexus0"
hint.arge.1.maddr=0x1a000000
hint.arge.1.msize=0x1000
hint.arge.1.irq=3
# PHY1, PHY2, PHY3 
hint.arge.1.phymask=0x0e
# should be 100 for RS 
hint.arge.1.media=1000
hint.arge.1.fduplex=1
# Uncomment this hint for RS (not PRO)
# hint.arge.0.phymask=70000

# GPIO
hint.gpio.0.at="apb0"
hint.gpio.0.maddr=0x18040000
hint.gpio.0.msize=0x1000
hint.gpio.0.irq=2

# RF led
hint.gpioled.0.at="gpiobus0"
hint.gpioled.0.name="rf"
# pin 2
hint.gpioled.0.pins=0x0004

# SPI flash
hint.spi.0.at="nexus0"
hint.spi.0.maddr=0x1f000000
hint.spi.0.msize=0x10

hint.mx25l.0.at="spibus0"
hint.mx25l.0.cs=0

# shares the same bus with mx25l. 
# CE low for flash, CE high for RTC
# at the moment it's just stub until SPI bus is ready for such hacks
# hint.rtc.0.at="spibus0"
# hint.rtc.0.cs=0

# Watchdog
hint.ar71xx_wdog.0.at="nexus0"
- Revert changes accidentally killed by merge operation 2009-04-14 22:53:22 +00:00			`# $FreeBSD$`
			`hint.apb.0.at="nexus0"`
			`hint.apb.0.irq=4`

			`# uart0`
			`hint.uart.0.at="apb0"`
			`# see atheros/uart_cpu_ar71xx.c why +3`
- Rollback to the hack with 3-bytes offset in base address. uart_bus_XXXXX resources are handled in uart(4) code and we need more sophysticated way to define which space should be used for device based on hints 2009-05-06 02:46:04 +00:00			`hint.uart.0.maddr=0x18020003`
- Revert changes accidentally killed by merge operation 2009-04-14 22:53:22 +00:00			`hint.uart.0.msize=0x18`
			`hint.uart.0.irq=3`

- Expand memory window for apb to include OHCI memory region - Add hints for EHCI and OHCI controllers 2009-04-19 23:08:23 +00:00			`#ohci`
			`hint.ohci.0.at="apb0"`
			`hint.ohci.0.maddr=0x1c000000`
			`hint.ohci.0.msize=0x01000000`
			`hint.ohci.0.irq=6`

			`#ehci`
			`hint.ehci.0.at="nexus0"`
			`hint.ehci.0.maddr=0x1b000000`
			`hint.ehci.0.msize=0x01000000`
			`hint.ehci.0.irq=1`

- Revert changes accidentally killed by merge operation 2009-04-14 22:53:22 +00:00			`# pci`
			`hint.pcib.0.at="nexus0"`
			`hint.pcib.0.irq=0`

			`hint.arge.0.at="nexus0"`
			`hint.arge.0.maddr=0x19000000`
			`hint.arge.0.msize=0x1000`
			`hint.arge.0.irq=2`
- Reorganize hints according to if_arge changes: set media for multiPHY MAC and use mask to specify PHYs. 2009-11-12 21:33:36 +00:00			`# PHY4 = 1 << 4`
			`hint.arge.0.phymask=0x10`
- Add commented hint required for RouterStation(non PRO) board 2009-09-08 05:24:09 +00:00			`# Uncomment this hint for RS (not PRO)`
- Reorganize hints according to if_arge changes: set media for multiPHY MAC and use mask to specify PHYs. 2009-11-12 21:33:36 +00:00			`# PHY20 = 1 << 20`
			`# hint.arge.0.phymask=0x100000`
- Add commented hint required for RouterStation(non PRO) board 2009-09-08 05:24:09 +00:00
- Add arge1 to hints files, only one port is supported so far 2009-11-08 07:31:42 +00:00			`hint.arge.1.at="nexus0"`
			`hint.arge.1.maddr=0x1a000000`
			`hint.arge.1.msize=0x1000`
			`hint.arge.1.irq=3`
- Reorganize hints according to if_arge changes: set media for multiPHY MAC and use mask to specify PHYs. 2009-11-12 21:33:36 +00:00			`# PHY1, PHY2, PHY3`
			`hint.arge.1.phymask=0x0e`
			`# should be 100 for RS`
			`hint.arge.1.media=1000`
			`hint.arge.1.fduplex=1`
- Add arge1 to hints files, only one port is supported so far 2009-11-08 07:31:42 +00:00			`# Uncomment this hint for RS (not PRO)`
- Reorganize hints according to if_arge changes: set media for multiPHY MAC and use mask to specify PHYs. 2009-11-12 21:33:36 +00:00			`# hint.arge.0.phymask=70000`
- Add spibus and mx25l device 2009-05-18 23:36:11 +00:00
Add GPIO bus to config and hints. Also add sample gpioled device. 2010-09-28 03:34:51 +00:00			`# GPIO`
			`hint.gpio.0.at="apb0"`
			`hint.gpio.0.maddr=0x18040000`
			`hint.gpio.0.msize=0x1000`
			`hint.gpio.0.irq=2`

			`# RF led`
			`hint.gpioled.0.at="gpiobus0"`
			`hint.gpioled.0.name="rf"`
			`# pin 2`
			`hint.gpioled.0.pins=0x0004`

- Add spibus and mx25l device 2009-05-18 23:36:11 +00:00			`# SPI flash`
			`hint.spi.0.at="nexus0"`
			`hint.spi.0.maddr=0x1f000000`
			`hint.spi.0.msize=0x10`

			`hint.mx25l.0.at="spibus0"`
			`hint.mx25l.0.cs=0`
- Add AR71XX watchdog timer driver 2009-07-09 20:16:01 +00:00
- Add driver for PCF2123, SPI real time clock/calendar 2010-01-22 22:14:12 +00:00			`# shares the same bus with mx25l.`
			`# CE low for flash, CE high for RTC`
			`# at the moment it's just stub until SPI bus is ready for such hacks`
			`# hint.rtc.0.at="spibus0"`
			`# hint.rtc.0.cs=0`

- Add AR71XX watchdog timer driver 2009-07-09 20:16:01 +00:00			`# Watchdog`
			`hint.ar71xx_wdog.0.at="nexus0"`