freebsd-dev/sys/sparc64/central/central.c

286 lines
7.9 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2003 Jake Burkholder.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/module.h>
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <dev/ofw/openfirm.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <sparc64/sbus/ofw_sbus.h>
struct central_devinfo {
struct ofw_bus_devinfo cdi_obdinfo;
struct resource_list cdi_rl;
};
struct central_softc {
int sc_nrange;
struct sbus_ranges *sc_ranges;
};
static device_probe_t central_probe;
static device_attach_t central_attach;
static bus_print_child_t central_print_child;
static bus_probe_nomatch_t central_probe_nomatch;
static bus_alloc_resource_t central_alloc_resource;
static bus_get_resource_list_t central_get_resource_list;
static ofw_bus_get_devinfo_t central_get_devinfo;
static int central_print_res(struct central_devinfo *);
static device_method_t central_methods[] = {
Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith)
2007-03-07 21:13:51 +00:00
/* Device interface */
DEVMETHOD(device_probe, central_probe),
DEVMETHOD(device_attach, central_attach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD(device_suspend, bus_generic_suspend),
DEVMETHOD(device_resume, bus_generic_resume),
Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith)
2007-03-07 21:13:51 +00:00
/* Bus interface */
DEVMETHOD(bus_print_child, central_print_child),
DEVMETHOD(bus_probe_nomatch, central_probe_nomatch),
DEVMETHOD(bus_setup_intr, bus_generic_setup_intr),
DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
DEVMETHOD(bus_alloc_resource, central_alloc_resource),
DEVMETHOD(bus_release_resource, bus_generic_rl_release_resource),
DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
DEVMETHOD(bus_get_resource_list, central_get_resource_list),
DEVMETHOD(bus_get_resource, bus_generic_rl_get_resource),
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
/* ofw_bus interface */
DEVMETHOD(ofw_bus_get_devinfo, central_get_devinfo),
DEVMETHOD(ofw_bus_get_compat, ofw_bus_gen_get_compat),
DEVMETHOD(ofw_bus_get_model, ofw_bus_gen_get_model),
DEVMETHOD(ofw_bus_get_name, ofw_bus_gen_get_name),
DEVMETHOD(ofw_bus_get_node, ofw_bus_gen_get_node),
DEVMETHOD(ofw_bus_get_type, ofw_bus_gen_get_type),
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
{ NULL, NULL }
};
static driver_t central_driver = {
"central",
central_methods,
sizeof(struct central_softc),
};
static devclass_t central_devclass;
DRIVER_MODULE(central, nexus, central_driver, central_devclass, 0, 0);
MODULE_VERSION(central, 1);
static int
central_probe(device_t dev)
{
Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith)
2007-03-07 21:13:51 +00:00
if (strcmp(ofw_bus_get_name(dev), "central") == 0) {
device_set_desc(dev, "central");
return (0);
}
return (ENXIO);
}
static int
central_attach(device_t dev)
{
struct central_devinfo *cdi;
struct sbus_regs *reg;
struct central_softc *sc;
phandle_t child;
phandle_t node;
device_t cdev;
int nreg;
int i;
sc = device_get_softc(dev);
Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith)
2007-03-07 21:13:51 +00:00
node = ofw_bus_get_node(dev);
sc->sc_nrange = OF_getprop_alloc(node, "ranges",
sizeof(*sc->sc_ranges), (void **)&sc->sc_ranges);
if (sc->sc_nrange == -1) {
device_printf(dev, "can't get ranges\n");
return (ENXIO);
}
for (child = OF_child(node); child != 0; child = OF_peer(child)) {
cdi = malloc(sizeof(*cdi), M_DEVBUF, M_WAITOK | M_ZERO);
if (ofw_bus_gen_setup_devinfo(&cdi->cdi_obdinfo, child) != 0) {
free(cdi, M_DEVBUF);
continue;
}
nreg = OF_getprop_alloc(child, "reg", sizeof(*reg),
(void **)&reg);
if (nreg == -1) {
device_printf(dev, "<%s>: incomplete\n",
cdi->cdi_obdinfo.obd_name);
ofw_bus_gen_destroy_devinfo(&cdi->cdi_obdinfo);
free(cdi, M_DEVBUF);
continue;
}
resource_list_init(&cdi->cdi_rl);
for (i = 0; i < nreg; i++)
resource_list_add(&cdi->cdi_rl, SYS_RES_MEMORY, i,
reg[i].sbr_offset, reg[i].sbr_offset +
reg[i].sbr_size, reg[i].sbr_size);
free(reg, M_OFWPROP);
cdev = device_add_child(dev, NULL, -1);
if (cdev == NULL) {
device_printf(dev, "<%s>: device_add_child failed\n",
cdi->cdi_obdinfo.obd_name);
resource_list_free(&cdi->cdi_rl);
ofw_bus_gen_destroy_devinfo(&cdi->cdi_obdinfo);
free(cdi, M_DEVBUF);
continue;
}
device_set_ivars(cdev, cdi);
}
return (bus_generic_attach(dev));
}
static int
central_print_child(device_t dev, device_t child)
{
int rv;
rv = bus_print_child_header(dev, child);
rv += central_print_res(device_get_ivars(child));
rv += bus_print_child_footer(dev, child);
return (rv);
}
static void
central_probe_nomatch(device_t dev, device_t child)
{
const char *type;
device_printf(dev, "<%s>", ofw_bus_get_name(child));
central_print_res(device_get_ivars(child));
type = ofw_bus_get_type(child);
printf(" type %s (no driver attached)\n",
type != NULL ? type : "unknown");
}
static struct resource *
central_alloc_resource(device_t bus, device_t child, int type, int *rid,
u_long start, u_long end, u_long count, u_int flags)
{
struct resource_list *rl;
struct resource_list_entry *rle;
struct central_softc *sc;
struct resource *res;
bus_addr_t coffset;
bus_addr_t cend;
bus_addr_t phys;
int isdefault;
int passthrough;
int i;
isdefault = (start == 0UL && end == ~0UL);
passthrough = (device_get_parent(child) != bus);
res = NULL;
rle = NULL;
rl = BUS_GET_RESOURCE_LIST(bus, child);
sc = device_get_softc(bus);
switch (type) {
case SYS_RES_IRQ:
return (resource_list_alloc(rl, bus, child, type, rid, start,
end, count, flags));
case SYS_RES_MEMORY:
if (!passthrough) {
rle = resource_list_find(rl, type, *rid);
if (rle == NULL)
return (NULL);
if (rle->res != NULL)
panic("%s: resource entry is busy", __func__);
if (isdefault) {
start = rle->start;
count = ulmax(count, rle->count);
end = ulmax(rle->end, start + count - 1);
}
}
for (i = 0; i < sc->sc_nrange; i++) {
coffset = sc->sc_ranges[i].coffset;
cend = coffset + sc->sc_ranges[i].size - 1;
if (start >= coffset && end <= cend) {
start -= coffset;
end -= coffset;
phys = sc->sc_ranges[i].poffset |
((bus_addr_t)sc->sc_ranges[i].pspace << 32);
res = bus_generic_alloc_resource(bus, child,
type, rid, phys + start, phys + end,
count, flags);
if (!passthrough)
rle->res = res;
break;
}
}
break;
}
return (res);
}
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
static struct resource_list *
central_get_resource_list(device_t bus, device_t child)
{
struct central_devinfo *cdi;
cdi = device_get_ivars(child);
return (&cdi->cdi_rl);
}
static const struct ofw_bus_devinfo *
central_get_devinfo(device_t bus, device_t child)
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
{
struct central_devinfo *cdi;
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
cdi = device_get_ivars(child);
return (&cdi->cdi_obdinfo);
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
}
static int
central_print_res(struct central_devinfo *cdi)
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
{
return (resource_list_print_type(&cdi->cdi_rl, "mem", SYS_RES_MEMORY,
"%#lx"));
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
}