freebsd-dev/sys/dev/netmap/netmap.c

1763 lines
49 KiB
C
Raw Normal View History

Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
/*
* Copyright (C) 2011 Matteo Landi, Luigi Rizzo. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* $FreeBSD$
* $Id: netmap.c 9662 2011-11-16 13:18:06Z luigi $
*
* This module supports memory mapped access to network devices,
* see netmap(4).
*
* The module uses a large, memory pool allocated by the kernel
* and accessible as mmapped memory by multiple userspace threads/processes.
* The memory pool contains packet buffers and "netmap rings",
* i.e. user-accessible copies of the interface's queues.
*
* Access to the network card works like this:
* 1. a process/thread issues one or more open() on /dev/netmap, to create
* select()able file descriptor on which events are reported.
* 2. on each descriptor, the process issues an ioctl() to identify
* the interface that should report events to the file descriptor.
* 3. on each descriptor, the process issues an mmap() request to
* map the shared memory region within the process' address space.
* The list of interesting queues is indicated by a location in
* the shared memory region.
* 4. using the functions in the netmap(4) userspace API, a process
* can look up the occupation state of a queue, access memory buffers,
* and retrieve received packets or enqueue packets to transmit.
* 5. using some ioctl()s the process can synchronize the userspace view
* of the queue with the actual status in the kernel. This includes both
* receiving the notification of new packets, and transmitting new
* packets on the output interface.
* 6. select() or poll() can be used to wait for events on individual
* transmit or receive queues (or all queues for a given interface).
*/
#include <sys/cdefs.h> /* prerequisite */
__FBSDID("$FreeBSD$");
#include <sys/types.h>
#include <sys/module.h>
#include <sys/errno.h>
#include <sys/param.h> /* defines used in kernel.h */
#include <sys/kernel.h> /* types used in module initialization */
#include <sys/conf.h> /* cdevsw struct */
#include <sys/uio.h> /* uio struct */
#include <sys/sockio.h>
#include <sys/socketvar.h> /* struct socket */
#include <sys/malloc.h>
#include <sys/mman.h> /* PROT_EXEC */
#include <sys/poll.h>
#include <vm/vm.h> /* vtophys */
#include <vm/pmap.h> /* vtophys */
#include <sys/socket.h> /* sockaddrs */
#include <machine/bus.h>
#include <sys/selinfo.h>
#include <sys/sysctl.h>
#include <net/if.h>
#include <net/bpf.h> /* BIOCIMMEDIATE */
#include <net/netmap.h>
#include <dev/netmap/netmap_kern.h>
#include <machine/bus.h> /* bus_dmamap_* */
MALLOC_DEFINE(M_NETMAP, "netmap", "Network memory map");
/*
* lock and unlock for the netmap memory allocator
*/
#define NMA_LOCK() mtx_lock(&netmap_mem_d->nm_mtx);
#define NMA_UNLOCK() mtx_unlock(&netmap_mem_d->nm_mtx);
/*
* Default amount of memory pre-allocated by the module.
* We start with a large size and then shrink our demand
* according to what is avalable when the module is loaded.
* At the moment the block is contiguous, but we can easily
* restrict our demand to smaller units (16..64k)
*/
#define NETMAP_MEMORY_SIZE (64 * 1024 * PAGE_SIZE)
static void * netmap_malloc(size_t size, const char *msg);
static void netmap_free(void *addr, const char *msg);
/*
* Allocator for a pool of packet buffers. For each buffer we have
* one entry in the bitmap to signal the state. Allocation scans
* the bitmap, but since this is done only on attach, we are not
* too worried about performance
* XXX if we need to allocate small blocks, a translation
* table is used both for kernel virtual address and physical
* addresses.
*/
struct netmap_buf_pool {
u_int total_buffers; /* total buffers. */
u_int free;
u_int bufsize;
char *base; /* buffer base address */
uint32_t *bitmap; /* one bit per buffer, 1 means free */
};
struct netmap_buf_pool nm_buf_pool;
/* XXX move these two vars back into netmap_buf_pool */
u_int netmap_total_buffers;
char *netmap_buffer_base;
/* user-controlled variables */
int netmap_verbose;
static int no_timestamp; /* don't timestamp on rxsync */
SYSCTL_NODE(_dev, OID_AUTO, netmap, CTLFLAG_RW, 0, "Netmap args");
SYSCTL_INT(_dev_netmap, OID_AUTO, verbose,
CTLFLAG_RW, &netmap_verbose, 0, "Verbose mode");
SYSCTL_INT(_dev_netmap, OID_AUTO, no_timestamp,
CTLFLAG_RW, &no_timestamp, 0, "no_timestamp");
SYSCTL_INT(_dev_netmap, OID_AUTO, total_buffers,
CTLFLAG_RD, &nm_buf_pool.total_buffers, 0, "total_buffers");
SYSCTL_INT(_dev_netmap, OID_AUTO, free_buffers,
CTLFLAG_RD, &nm_buf_pool.free, 0, "free_buffers");
/*
* Allocate n buffers from the ring, and fill the slot.
* Buffer 0 is the 'junk' buffer.
*/
static void
netmap_new_bufs(struct netmap_buf_pool *p, struct netmap_slot *slot, u_int n)
{
uint32_t bi = 0; /* index in the bitmap */
uint32_t mask, j, i = 0; /* slot counter */
if (n > p->free) {
D("only %d out of %d buffers available", i, n);
return;
}
/* termination is guaranteed by p->free */
while (i < n && p->free > 0) {
uint32_t cur = p->bitmap[bi];
if (cur == 0) { /* bitmask is fully used */
bi++;
continue;
}
/* locate a slot */
for (j = 0, mask = 1; (cur & mask) == 0; j++, mask <<= 1) ;
p->bitmap[bi] &= ~mask; /* slot in use */
p->free--;
slot[i].buf_idx = bi*32+j;
slot[i].len = p->bufsize;
slot[i].flags = NS_BUF_CHANGED;
i++;
}
ND("allocated %d buffers, %d available", n, p->free);
}
static void
netmap_free_buf(struct netmap_buf_pool *p, uint32_t i)
{
uint32_t pos, mask;
if (i >= p->total_buffers) {
D("invalid free index %d", i);
return;
}
pos = i / 32;
mask = 1 << (i % 32);
if (p->bitmap[pos] & mask) {
D("slot %d already free", i);
return;
}
p->bitmap[pos] |= mask;
p->free++;
}
/* Descriptor of the memory objects handled by our memory allocator. */
struct netmap_mem_obj {
TAILQ_ENTRY(netmap_mem_obj) nmo_next; /* next object in the
chain. */
int nmo_used; /* flag set on used memory objects. */
size_t nmo_size; /* size of the memory area reserved for the
object. */
void *nmo_data; /* pointer to the memory area. */
};
/* Wrap our memory objects to make them ``chainable``. */
TAILQ_HEAD(netmap_mem_obj_h, netmap_mem_obj);
/* Descriptor of our custom memory allocator. */
struct netmap_mem_d {
struct mtx nm_mtx; /* lock used to handle the chain of memory
objects. */
struct netmap_mem_obj_h nm_molist; /* list of memory objects */
size_t nm_size; /* total amount of memory used for rings etc. */
size_t nm_totalsize; /* total amount of allocated memory
(the difference is used for buffers) */
size_t nm_buf_start; /* offset of packet buffers.
This is page-aligned. */
size_t nm_buf_len; /* total memory for buffers */
void *nm_buffer; /* pointer to the whole pre-allocated memory
area. */
};
/* Structure associated to each thread which registered an interface. */
struct netmap_priv_d {
struct netmap_if *np_nifp; /* netmap interface descriptor. */
struct ifnet *np_ifp; /* device for which we hold a reference */
int np_ringid; /* from the ioctl */
u_int np_qfirst, np_qlast; /* range of rings to scan */
uint16_t np_txpoll;
};
static struct cdev *netmap_dev; /* /dev/netmap character device. */
static struct netmap_mem_d *netmap_mem_d; /* Our memory allocator. */
static d_mmap_t netmap_mmap;
static d_ioctl_t netmap_ioctl;
static d_poll_t netmap_poll;
#ifdef NETMAP_KEVENT
static d_kqfilter_t netmap_kqfilter;
#endif
static struct cdevsw netmap_cdevsw = {
.d_version = D_VERSION,
.d_name = "netmap",
.d_mmap = netmap_mmap,
.d_ioctl = netmap_ioctl,
.d_poll = netmap_poll,
#ifdef NETMAP_KEVENT
.d_kqfilter = netmap_kqfilter,
#endif
};
#ifdef NETMAP_KEVENT
static int netmap_kqread(struct knote *, long);
static int netmap_kqwrite(struct knote *, long);
static void netmap_kqdetach(struct knote *);
static struct filterops netmap_read_filterops = {
.f_isfd = 1,
.f_attach = NULL,
.f_detach = netmap_kqdetach,
.f_event = netmap_kqread,
};
static struct filterops netmap_write_filterops = {
.f_isfd = 1,
.f_attach = NULL,
.f_detach = netmap_kqdetach,
.f_event = netmap_kqwrite,
};
/*
* support for the kevent() system call.
*
* This is the kevent filter, and is executed each time a new event
* is triggered on the device. This function execute some operation
* depending on the received filter.
*
* The implementation should test the filters and should implement
* filter operations we are interested on (a full list in /sys/event.h).
*
* On a match we should:
* - set kn->kn_fop
* - set kn->kn_hook
* - call knlist_add() to deliver the event to the application.
*
* Return 0 if the event should be delivered to the application.
*/
static int
netmap_kqfilter(struct cdev *dev, struct knote *kn)
{
/* declare variables needed to read/write */
switch(kn->kn_filter) {
case EVFILT_READ:
if (netmap_verbose)
D("%s kqfilter: EVFILT_READ" ifp->if_xname);
/* read operations */
kn->kn_fop = &netmap_read_filterops;
break;
case EVFILT_WRITE:
if (netmap_verbose)
D("%s kqfilter: EVFILT_WRITE" ifp->if_xname);
/* write operations */
kn->kn_fop = &netmap_write_filterops;
break;
default:
if (netmap_verbose)
D("%s kqfilter: invalid filter" ifp->if_xname);
return(EINVAL);
}
kn->kn_hook = 0;//
knlist_add(&netmap_sc->tun_rsel.si_note, kn, 0);
return (0);
}
#endif /* NETMAP_KEVENT */
/*
* File descriptor's private data destructor.
*
* Call nm_register(ifp,0) to stop netmap mode on the interface and
* revert to normal operation. We expect that np_ifp has not gone.
*/
static void
netmap_dtor(void *data)
{
struct netmap_priv_d *priv = data;
struct ifnet *ifp = priv->np_ifp;
struct netmap_adapter *na = NA(ifp);
struct netmap_if *nifp = priv->np_nifp;
if (0)
printf("%s starting for %p ifp %p\n", __FUNCTION__, priv,
priv ? priv->np_ifp : NULL);
na->nm_lock(ifp->if_softc, NETMAP_CORE_LOCK, 0);
na->refcount--;
if (na->refcount <= 0) { /* last instance */
u_int i;
D("deleting last netmap instance for %s", ifp->if_xname);
/*
* there is a race here with *_netmap_task() and
* netmap_poll(), which don't run under NETMAP_CORE_LOCK.
* na->refcount == 0 && na->ifp->if_capenable & IFCAP_NETMAP
* (aka NETMAP_DELETING(na)) are a unique marker that the
* device is dying.
* Before destroying stuff we sleep a bit, and then complete
* the job. NIOCREG should realize the condition and
* loop until they can continue; the other routines
* should check the condition at entry and quit if
* they cannot run.
*/
na->nm_lock(ifp->if_softc, NETMAP_CORE_UNLOCK, 0);
tsleep(na, 0, "NIOCUNREG", 4);
na->nm_lock(ifp->if_softc, NETMAP_CORE_LOCK, 0);
na->nm_register(ifp, 0); /* off, clear IFCAP_NETMAP */
/* Wake up any sleeping threads. netmap_poll will
* then return POLLERR
*/
for (i = 0; i < na->num_queues + 2; i++) {
selwakeuppri(&na->tx_rings[i].si, PI_NET);
selwakeuppri(&na->rx_rings[i].si, PI_NET);
}
/* release all buffers */
NMA_LOCK();
for (i = 0; i < na->num_queues + 1; i++) {
int j, lim;
struct netmap_ring *ring;
ND("tx queue %d", i);
ring = na->tx_rings[i].ring;
lim = na->tx_rings[i].nkr_num_slots;
for (j = 0; j < lim; j++)
netmap_free_buf(&nm_buf_pool,
ring->slot[j].buf_idx);
ND("rx queue %d", i);
ring = na->rx_rings[i].ring;
lim = na->rx_rings[i].nkr_num_slots;
for (j = 0; j < lim; j++)
netmap_free_buf(&nm_buf_pool,
ring->slot[j].buf_idx);
}
NMA_UNLOCK();
netmap_free(na->tx_rings[0].ring, "shadow rings");
wakeup(na);
}
netmap_free(nifp, "nifp");
na->nm_lock(ifp->if_softc, NETMAP_CORE_UNLOCK, 0);
if_rele(ifp);
bzero(priv, sizeof(*priv)); /* XXX for safety */
free(priv, M_DEVBUF);
}
/*
* Create and return a new ``netmap_if`` object, and possibly also
* rings and packet buffors.
*
* Return NULL on failure.
*/
static void *
netmap_if_new(const char *ifname, struct netmap_adapter *na)
{
struct netmap_if *nifp;
struct netmap_ring *ring;
char *buff;
u_int i, len, ofs;
u_int n = na->num_queues + 1; /* shorthand, include stack queue */
/*
* the descriptor is followed inline by an array of offsets
* to the tx and rx rings in the shared memory region.
*/
len = sizeof(struct netmap_if) + 2 * n * sizeof(ssize_t);
nifp = netmap_malloc(len, "nifp");
if (nifp == NULL)
return (NULL);
/* initialize base fields */
*(int *)(uintptr_t)&nifp->ni_num_queues = na->num_queues;
strncpy(nifp->ni_name, ifname, IFNAMSIZ);
(na->refcount)++; /* XXX atomic ? we are under lock */
if (na->refcount > 1)
goto final;
/*
* If this is the first instance, allocate the shadow rings and
* buffers for this card (one for each hw queue, one for the host).
* The rings are contiguous, but have variable size.
* The entire block is reachable at
* na->tx_rings[0].ring
*/
len = n * (2 * sizeof(struct netmap_ring) +
(na->num_tx_desc + na->num_rx_desc) *
sizeof(struct netmap_slot) );
buff = netmap_malloc(len, "shadow rings");
if (buff == NULL) {
D("failed to allocate %d bytes for %s shadow ring",
len, ifname);
error:
(na->refcount)--;
netmap_free(nifp, "nifp, rings failed");
return (NULL);
}
/* do we have the bufers ? we are in need of num_tx_desc buffers for
* each tx ring and num_tx_desc buffers for each rx ring. */
len = n * (na->num_tx_desc + na->num_rx_desc);
NMA_LOCK();
if (nm_buf_pool.free < len) {
NMA_UNLOCK();
netmap_free(buff, "not enough bufs");
goto error;
}
/*
* in the kring, store the pointers to the shared rings
* and initialize the rings. We are under NMA_LOCK().
*/
ofs = 0;
for (i = 0; i < n; i++) {
struct netmap_kring *kring;
int numdesc;
/* Transmit rings */
kring = &na->tx_rings[i];
numdesc = na->num_tx_desc;
bzero(kring, sizeof(*kring));
kring->na = na;
ring = kring->ring = (struct netmap_ring *)(buff + ofs);
*(ssize_t *)(uintptr_t)&ring->buf_ofs =
nm_buf_pool.base - (char *)ring;
ND("txring[%d] at %p ofs %d", i, ring, ring->buf_ofs);
*(int *)(int *)(uintptr_t)&ring->num_slots =
kring->nkr_num_slots = numdesc;
/*
* IMPORTANT:
* Always keep one slot empty, so we can detect new
* transmissions comparing cur and nr_hwcur (they are
* the same only if there are no new transmissions).
*/
ring->avail = kring->nr_hwavail = numdesc - 1;
ring->cur = kring->nr_hwcur = 0;
netmap_new_bufs(&nm_buf_pool, ring->slot, numdesc);
ofs += sizeof(struct netmap_ring) +
numdesc * sizeof(struct netmap_slot);
/* Receive rings */
kring = &na->rx_rings[i];
numdesc = na->num_rx_desc;
bzero(kring, sizeof(*kring));
kring->na = na;
ring = kring->ring = (struct netmap_ring *)(buff + ofs);
*(ssize_t *)(uintptr_t)&ring->buf_ofs =
nm_buf_pool.base - (char *)ring;
ND("rxring[%d] at %p offset %d", i, ring, ring->buf_ofs);
*(int *)(int *)(uintptr_t)&ring->num_slots =
kring->nkr_num_slots = numdesc;
ring->cur = kring->nr_hwcur = 0;
ring->avail = kring->nr_hwavail = 0; /* empty */
netmap_new_bufs(&nm_buf_pool, ring->slot, numdesc);
ofs += sizeof(struct netmap_ring) +
numdesc * sizeof(struct netmap_slot);
}
NMA_UNLOCK();
for (i = 0; i < n+1; i++) {
// XXX initialize the selrecord structs.
}
final:
/*
* fill the slots for the rx and tx queues. They contain the offset
* between the ring and nifp, so the information is usable in
* userspace to reach the ring from the nifp.
*/
for (i = 0; i < n; i++) {
char *base = (char *)nifp;
*(ssize_t *)(uintptr_t)&nifp->ring_ofs[i] =
(char *)na->tx_rings[i].ring - base;
*(ssize_t *)(uintptr_t)&nifp->ring_ofs[i+n] =
(char *)na->rx_rings[i].ring - base;
}
return (nifp);
}
/*
* mmap(2) support for the "netmap" device.
*
* Expose all the memory previously allocated by our custom memory
* allocator: this way the user has only to issue a single mmap(2), and
* can work on all the data structures flawlessly.
*
* Return 0 on success, -1 otherwise.
*/
static int
#if __FreeBSD_version < 900000
netmap_mmap(__unused struct cdev *dev, vm_offset_t offset, vm_paddr_t *paddr,
int nprot)
#else
netmap_mmap(__unused struct cdev *dev, vm_ooffset_t offset, vm_paddr_t *paddr,
int nprot, __unused vm_memattr_t *memattr)
#endif
{
if (nprot & PROT_EXEC)
return (-1); // XXX -1 or EINVAL ?
ND("request for offset 0x%x", (uint32_t)offset);
*paddr = vtophys(netmap_mem_d->nm_buffer) + offset;
return (0);
}
/*
* handler for synchronization of the queues from/to the host
*/
static void
netmap_sync_to_host(struct netmap_adapter *na)
{
struct netmap_kring *kring = &na->tx_rings[na->num_queues];
struct netmap_ring *ring = kring->ring;
struct mbuf *head = NULL, *tail = NULL, *m;
u_int n, lim = kring->nkr_num_slots - 1;
na->nm_lock(na->ifp->if_softc, NETMAP_CORE_LOCK, 0);
/* Take packets from hwcur to cur and pass them up.
* In case of no buffers we give up. At the end of the loop,
* the queue is drained in all cases.
*/
for (n = kring->nr_hwcur; n != ring->cur;) {
struct netmap_slot *slot = &ring->slot[n];
n = (n == lim) ? 0 : n + 1;
if (slot->len < 14 || slot->len > NETMAP_BUF_SIZE) {
D("bad pkt at %d len %d", n, slot->len);
continue;
}
m = m_devget(NMB(slot), slot->len, 0, na->ifp, NULL);
if (m == NULL)
break;
if (tail)
tail->m_nextpkt = m;
else
head = m;
tail = m;
m->m_nextpkt = NULL;
}
kring->nr_hwcur = ring->cur;
kring->nr_hwavail = ring->avail = lim;
na->nm_lock(na->ifp->if_softc, NETMAP_CORE_UNLOCK, 0);
/* send packets up, outside the lock */
while ((m = head) != NULL) {
head = head->m_nextpkt;
m->m_nextpkt = NULL;
m->m_pkthdr.rcvif = na->ifp;
if (netmap_verbose & NM_VERB_HOST)
D("sending up pkt %p size %d", m, m->m_pkthdr.len);
(na->ifp->if_input)(na->ifp, m);
}
}
/*
* This routine also does the selrecord if called from the poll handler
* (we know because td != NULL).
*/
static void
netmap_sync_from_host(struct netmap_adapter *na, struct thread *td)
{
struct netmap_kring *kring = &na->rx_rings[na->num_queues];
struct netmap_ring *ring = kring->ring;
int delta;
na->nm_lock(na->ifp->if_softc, NETMAP_CORE_LOCK, 0);
/* skip past packets processed by userspace,
* and then sync cur/avail with hwcur/hwavail
*/
delta = ring->cur - kring->nr_hwcur;
if (delta < 0)
delta += kring->nkr_num_slots;
kring->nr_hwavail -= delta;
kring->nr_hwcur = ring->cur;
ring->avail = kring->nr_hwavail;
if (ring->avail == 0 && td)
selrecord(td, &kring->si);
if (ring->avail && (netmap_verbose & NM_VERB_HOST))
D("%d pkts from stack", ring->avail);
na->nm_lock(na->ifp->if_softc, NETMAP_CORE_UNLOCK, 0);
}
/*
* get a refcounted reference to an interface.
* Return ENXIO if the interface does not exist, EINVAL if netmap
* is not supported by the interface.
* If successful, hold a reference.
*/
static int
get_ifp(const char *name, struct ifnet **ifp)
{
*ifp = ifunit_ref(name);
if (*ifp == NULL)
return (ENXIO);
/* can do this if the capability exists and if_pspare[0]
* points to the netmap descriptor.
*/
if ((*ifp)->if_capabilities & IFCAP_NETMAP && NA(*ifp))
return 0; /* valid pointer, we hold the refcount */
if_rele(*ifp);
return EINVAL; // not NETMAP capable
}
/*
* Error routine called when txsync/rxsync detects an error.
* Can't do much more than resetting cur = hwcur, avail = hwavail.
* Return 1 on reinit.
*/
int
netmap_ring_reinit(struct netmap_kring *kring)
{
struct netmap_ring *ring = kring->ring;
u_int i, lim = kring->nkr_num_slots - 1;
int errors = 0;
D("called for %s", kring->na->ifp->if_xname);
if (ring->cur > lim)
errors++;
for (i = 0; i <= lim; i++) {
u_int idx = ring->slot[i].buf_idx;
u_int len = ring->slot[i].len;
if (idx < 2 || idx >= netmap_total_buffers) {
if (!errors++)
D("bad buffer at slot %d idx %d len %d ", i, idx, len);
ring->slot[i].buf_idx = 0;
ring->slot[i].len = 0;
} else if (len > NETMAP_BUF_SIZE) {
ring->slot[i].len = 0;
if (!errors++)
D("bad len %d at slot %d idx %d",
len, i, idx);
}
}
if (errors) {
int pos = kring - kring->na->tx_rings;
int n = kring->na->num_queues + 2;
D("total %d errors", errors);
errors++;
D("%s %s[%d] reinit, cur %d -> %d avail %d -> %d",
kring->na->ifp->if_xname,
pos < n ? "TX" : "RX", pos < n ? pos : pos - n,
ring->cur, kring->nr_hwcur,
ring->avail, kring->nr_hwavail);
ring->cur = kring->nr_hwcur;
ring->avail = kring->nr_hwavail;
ring->flags |= NR_REINIT;
kring->na->flags |= NR_REINIT;
}
return (errors ? 1 : 0);
}
/*
* Clean the reinit flag for our rings.
* XXX at the moment, clear for all rings
*/
static void
netmap_clean_reinit(struct netmap_adapter *na)
{
//struct netmap_kring *kring;
u_int i;
na->flags &= ~NR_REINIT;
D("--- NR_REINIT reset on %s", na->ifp->if_xname);
for (i = 0; i < na->num_queues + 1; i++) {
na->tx_rings[i].ring->flags &= ~NR_REINIT;
na->rx_rings[i].ring->flags &= ~NR_REINIT;
}
}
/*
* Set the ring ID. For devices with a single queue, a request
* for all rings is the same as a single ring.
*/
static int
netmap_set_ringid(struct netmap_priv_d *priv, u_int ringid)
{
struct ifnet *ifp = priv->np_ifp;
struct netmap_adapter *na = NA(ifp);
void *adapter = na->ifp->if_softc; /* shorthand */
u_int i = ringid & NETMAP_RING_MASK;
/* first time we don't lock */
int need_lock = (priv->np_qfirst != priv->np_qlast);
if ( (ringid & NETMAP_HW_RING) && i >= na->num_queues) {
D("invalid ring id %d", i);
return (EINVAL);
}
if (need_lock)
na->nm_lock(adapter, NETMAP_CORE_LOCK, 0);
priv->np_ringid = ringid;
if (ringid & NETMAP_SW_RING) {
priv->np_qfirst = na->num_queues;
priv->np_qlast = na->num_queues + 1;
} else if (ringid & NETMAP_HW_RING) {
priv->np_qfirst = i;
priv->np_qlast = i + 1;
} else {
priv->np_qfirst = 0;
priv->np_qlast = na->num_queues;
}
priv->np_txpoll = (ringid & NETMAP_NO_TX_POLL) ? 0 : 1;
if (need_lock)
na->nm_lock(adapter, NETMAP_CORE_UNLOCK, 0);
if (ringid & NETMAP_SW_RING)
D("ringid %s set to SW RING", ifp->if_xname);
else if (ringid & NETMAP_HW_RING)
D("ringid %s set to HW RING %d", ifp->if_xname,
priv->np_qfirst);
else
D("ringid %s set to all %d HW RINGS", ifp->if_xname,
priv->np_qlast);
return 0;
}
/*
* ioctl(2) support for the "netmap" device.
*
* Following a list of accepted commands:
* - NIOCGINFO
* - SIOCGIFADDR just for convenience
* - NIOCREGIF
* - NIOCUNREGIF
* - NIOCTXSYNC
* - NIOCRXSYNC
*
* Return 0 on success, errno otherwise.
*/
static int
netmap_ioctl(__unused struct cdev *dev, u_long cmd, caddr_t data,
__unused int fflag, __unused struct thread *td)
{
struct netmap_priv_d *priv = NULL;
struct ifnet *ifp;
struct nmreq *nmr = (struct nmreq *) data;
struct netmap_adapter *na;
void *adapter;
int error;
u_int i;
struct netmap_if *nifp;
error = devfs_get_cdevpriv((void **)&priv);
if (error != ENOENT && error != 0)
return (error);
error = 0; /* Could be ENOENT */
switch (cmd) {
case NIOCGINFO: /* return capabilities etc */
/* memsize is always valid */
nmr->nr_memsize = netmap_mem_d->nm_totalsize;
nmr->nr_offset = 0;
nmr->nr_numrings = 0;
nmr->nr_numslots = 0;
if (nmr->nr_name[0] == '\0') /* just get memory info */
break;
error = get_ifp(nmr->nr_name, &ifp); /* get a refcount */
if (error)
break;
na = NA(ifp); /* retrieve netmap_adapter */
nmr->nr_numrings = na->num_queues;
nmr->nr_numslots = na->num_tx_desc;
if_rele(ifp); /* return the refcount */
break;
case NIOCREGIF:
if (priv != NULL) /* thread already registered */
return netmap_set_ringid(priv, nmr->nr_ringid);
/* find the interface and a reference */
error = get_ifp(nmr->nr_name, &ifp); /* keep reference */
if (error)
break;
na = NA(ifp); /* retrieve netmap adapter */
adapter = na->ifp->if_softc; /* shorthand */
/*
* Allocate the private per-thread structure.
* XXX perhaps we can use a blocking malloc ?
*/
priv = malloc(sizeof(struct netmap_priv_d), M_DEVBUF,
M_NOWAIT | M_ZERO);
if (priv == NULL) {
error = ENOMEM;
if_rele(ifp); /* return the refcount */
break;
}
for (i = 10; i > 0; i--) {
na->nm_lock(adapter, NETMAP_CORE_LOCK, 0);
if (!NETMAP_DELETING(na))
break;
na->nm_lock(adapter, NETMAP_CORE_UNLOCK, 0);
tsleep(na, 0, "NIOCREGIF", hz/10);
}
if (i == 0) {
D("too many NIOCREGIF attempts, give up");
error = EINVAL;
free(priv, M_DEVBUF);
if_rele(ifp); /* return the refcount */
break;
}
priv->np_ifp = ifp; /* store the reference */
error = netmap_set_ringid(priv, nmr->nr_ringid);
if (error)
goto error;
priv->np_nifp = nifp = netmap_if_new(nmr->nr_name, na);
if (nifp == NULL) { /* allocation failed */
error = ENOMEM;
} else if (ifp->if_capenable & IFCAP_NETMAP) {
/* was already set */
} else {
/* Otherwise set the card in netmap mode
* and make it use the shared buffers.
*/
error = na->nm_register(ifp, 1); /* mode on */
if (error) {
/*
* do something similar to netmap_dtor().
*/
netmap_free(na->tx_rings[0].ring, "rings, reg.failed");
free(na->tx_rings, M_DEVBUF);
na->tx_rings = na->rx_rings = NULL;
na->refcount--;
netmap_free(nifp, "nifp, rings failed");
nifp = NULL;
}
}
if (error) { /* reg. failed, release priv and ref */
error:
na->nm_lock(adapter, NETMAP_CORE_UNLOCK, 0);
free(priv, M_DEVBUF);
if_rele(ifp); /* return the refcount */
break;
}
na->nm_lock(adapter, NETMAP_CORE_UNLOCK, 0);
error = devfs_set_cdevpriv(priv, netmap_dtor);
if (error != 0) {
/* could not assign the private storage for the
* thread, call the destructor explicitly.
*/
netmap_dtor(priv);
break;
}
/* return the offset of the netmap_if object */
nmr->nr_numrings = na->num_queues;
nmr->nr_numslots = na->num_tx_desc;
nmr->nr_memsize = netmap_mem_d->nm_totalsize;
nmr->nr_offset =
((char *) nifp - (char *) netmap_mem_d->nm_buffer);
break;
case NIOCUNREGIF:
if (priv == NULL)
return (ENXIO);
/* the interface is unregistered inside the
destructor of the private data. */
devfs_clear_cdevpriv();
break;
case NIOCTXSYNC:
case NIOCRXSYNC:
if (priv == NULL)
return (ENXIO);
ifp = priv->np_ifp; /* we have a reference */
na = NA(ifp); /* retrieve netmap adapter */
adapter = ifp->if_softc; /* shorthand */
if (na->flags & NR_REINIT)
netmap_clean_reinit(na);
if (priv->np_qfirst == na->num_queues) {
/* queues to/from host */
if (cmd == NIOCTXSYNC)
netmap_sync_to_host(na);
else
netmap_sync_from_host(na, NULL);
return error;
}
for (i = priv->np_qfirst; i < priv->np_qlast; i++) {
if (cmd == NIOCTXSYNC) {
struct netmap_kring *kring = &na->tx_rings[i];
if (netmap_verbose & NM_VERB_TXSYNC)
D("sync tx ring %d cur %d hwcur %d",
i, kring->ring->cur,
kring->nr_hwcur);
na->nm_txsync(adapter, i, 1 /* do lock */);
if (netmap_verbose & NM_VERB_TXSYNC)
D("after sync tx ring %d cur %d hwcur %d",
i, kring->ring->cur,
kring->nr_hwcur);
} else {
na->nm_rxsync(adapter, i, 1 /* do lock */);
microtime(&na->rx_rings[i].ring->ts);
}
}
break;
case BIOCIMMEDIATE:
case BIOCGHDRCMPLT:
case BIOCSHDRCMPLT:
case BIOCSSEESENT:
D("ignore BIOCIMMEDIATE/BIOCSHDRCMPLT/BIOCSHDRCMPLT/BIOCSSEESENT");
break;
default:
{
/*
* allow device calls
*/
struct socket so;
bzero(&so, sizeof(so));
error = get_ifp(nmr->nr_name, &ifp); /* keep reference */
if (error)
break;
so.so_vnet = ifp->if_vnet;
// so->so_proto not null.
error = ifioctl(&so, cmd, data, td);
if_rele(ifp);
}
}
return (error);
}
/*
* select(2) and poll(2) handlers for the "netmap" device.
*
* Can be called for one or more queues.
* Return true the event mask corresponding to ready events.
* If there are no ready events, do a selrecord on either individual
* selfd or on the global one.
* Device-dependent parts (locking and sync of tx/rx rings)
* are done through callbacks.
*/
static int
netmap_poll(__unused struct cdev *dev, int events, struct thread *td)
{
struct netmap_priv_d *priv = NULL;
struct netmap_adapter *na;
struct ifnet *ifp;
struct netmap_kring *kring;
u_int i, check_all, want_tx, want_rx, revents = 0;
void *adapter;
if (devfs_get_cdevpriv((void **)&priv) != 0 || priv == NULL)
return POLLERR;
ifp = priv->np_ifp;
// XXX check for deleting() ?
if ( (ifp->if_capenable & IFCAP_NETMAP) == 0)
return POLLERR;
if (netmap_verbose & 0x8000)
D("device %s events 0x%x", ifp->if_xname, events);
want_tx = events & (POLLOUT | POLLWRNORM);
want_rx = events & (POLLIN | POLLRDNORM);
adapter = ifp->if_softc;
na = NA(ifp); /* retrieve netmap adapter */
/* pending reinit, report up as a poll error. Pending
* reads and writes are lost.
*/
if (na->flags & NR_REINIT) {
netmap_clean_reinit(na);
revents |= POLLERR;
}
/* how many queues we are scanning */
i = priv->np_qfirst;
if (i == na->num_queues) { /* from/to host */
if (priv->np_txpoll || want_tx) {
/* push any packets up, then we are always ready */
kring = &na->tx_rings[i];
netmap_sync_to_host(na);
revents |= want_tx;
}
if (want_rx) {
kring = &na->rx_rings[i];
if (kring->ring->avail == 0)
netmap_sync_from_host(na, td);
if (kring->ring->avail > 0) {
revents |= want_rx;
}
}
return (revents);
}
/*
* check_all is set if the card has more than one queue and
* the client is polling all of them. If true, we sleep on
* the "global" selfd, otherwise we sleep on individual selfd
* (we can only sleep on one of them per direction).
* The interrupt routine in the driver should always wake on
* the individual selfd, and also on the global one if the card
* has more than one ring.
*
* If the card has only one lock, we just use that.
* If the card has separate ring locks, we just use those
* unless we are doing check_all, in which case the whole
* loop is wrapped by the global lock.
* We acquire locks only when necessary: if poll is called
* when buffers are available, we can just return without locks.
*
* rxsync() is only called if we run out of buffers on a POLLIN.
* txsync() is called if we run out of buffers on POLLOUT, or
* there are pending packets to send. The latter can be disabled
* passing NETMAP_NO_TX_POLL in the NIOCREG call.
*/
check_all = (i + 1 != priv->np_qlast);
/*
* core_lock indicates what to do with the core lock.
* The core lock is used when either the card has no individual
* locks, or it has individual locks but we are cheking all
* rings so we need the core lock to avoid missing wakeup events.
*
* It has three possible states:
* NO_CL we don't need to use the core lock, e.g.
* because we are protected by individual locks.
* NEED_CL we need the core lock. In this case, when we
* call the lock routine, move to LOCKED_CL
* to remember to release the lock once done.
* LOCKED_CL core lock is set, so we need to release it.
*/
enum {NO_CL, NEED_CL, LOCKED_CL };
int core_lock = (check_all || !na->separate_locks) ?
NEED_CL:NO_CL;
/*
* We start with a lock free round which is good if we have
* data available. If this fails, then lock and call the sync
* routines.
*/
for (i = priv->np_qfirst; want_rx && i < priv->np_qlast; i++) {
kring = &na->rx_rings[i];
if (kring->ring->avail > 0) {
revents |= want_rx;
want_rx = 0; /* also breaks the loop */
}
}
for (i = priv->np_qfirst; want_tx && i < priv->np_qlast; i++) {
kring = &na->tx_rings[i];
if (kring->ring->avail > 0) {
revents |= want_tx;
want_tx = 0; /* also breaks the loop */
}
}
/*
* If we to push packets out (priv->np_txpoll) or want_tx is
* still set, we do need to run the txsync calls (on all rings,
* to avoid that the tx rings stall).
*/
if (priv->np_txpoll || want_tx) {
for (i = priv->np_qfirst; i < priv->np_qlast; i++) {
kring = &na->tx_rings[i];
if (!want_tx && kring->ring->cur == kring->nr_hwcur)
continue;
if (core_lock == NEED_CL) {
na->nm_lock(adapter, NETMAP_CORE_LOCK, 0);
core_lock = LOCKED_CL;
}
if (na->separate_locks)
na->nm_lock(adapter, NETMAP_TX_LOCK, i);
if (netmap_verbose & NM_VERB_TXSYNC)
D("send %d on %s %d",
kring->ring->cur,
ifp->if_xname, i);
if (na->nm_txsync(adapter, i, 0 /* no lock */))
revents |= POLLERR;
if (want_tx) {
if (kring->ring->avail > 0) {
/* stop at the first ring. We don't risk
* starvation.
*/
revents |= want_tx;
want_tx = 0;
} else if (!check_all)
selrecord(td, &kring->si);
}
if (na->separate_locks)
na->nm_lock(adapter, NETMAP_TX_UNLOCK, i);
}
}
/*
* now if want_rx is still set we need to lock and rxsync.
* Do it on all rings because otherwise we starve.
*/
if (want_rx) {
for (i = priv->np_qfirst; i < priv->np_qlast; i++) {
kring = &na->rx_rings[i];
if (core_lock == NEED_CL) {
na->nm_lock(adapter, NETMAP_CORE_LOCK, 0);
core_lock = LOCKED_CL;
}
if (na->separate_locks)
na->nm_lock(adapter, NETMAP_RX_LOCK, i);
if (na->nm_rxsync(adapter, i, 0 /* no lock */))
revents |= POLLERR;
if (no_timestamp == 0 ||
kring->ring->flags & NR_TIMESTAMP)
microtime(&kring->ring->ts);
if (kring->ring->avail > 0)
revents |= want_rx;
else if (!check_all)
selrecord(td, &kring->si);
if (na->separate_locks)
na->nm_lock(adapter, NETMAP_RX_UNLOCK, i);
}
}
if (check_all && revents == 0) {
i = na->num_queues + 1; /* the global queue */
if (want_tx)
selrecord(td, &na->tx_rings[i].si);
if (want_rx)
selrecord(td, &na->rx_rings[i].si);
}
if (core_lock == LOCKED_CL)
na->nm_lock(adapter, NETMAP_CORE_UNLOCK, 0);
return (revents);
}
/*------- driver support routines ------*/
/*
* Initialize a ``netmap_adapter`` object created by driver on attach.
* We allocate a block of memory with room for a struct netmap_adapter
* plus two sets of N+2 struct netmap_kring (where N is the number
* of hardware rings):
* krings 0..N-1 are for the hardware queues.
* kring N is for the host stack queue
* kring N+1 is only used for the selinfo for all queues.
* Return 0 on success, ENOMEM otherwise.
*/
int
netmap_attach(struct netmap_adapter *na, int num_queues)
{
int n = num_queues + 2;
int size = sizeof(*na) + 2 * n * sizeof(struct netmap_kring);
void *buf;
struct ifnet *ifp = na->ifp;
if (ifp == NULL) {
D("ifp not set, giving up");
return EINVAL;
}
na->refcount = 0;
na->num_queues = num_queues;
buf = malloc(size, M_DEVBUF, M_NOWAIT | M_ZERO);
if (buf) {
ifp->if_pspare[0] = buf;
na->tx_rings = (void *)((char *)buf + sizeof(*na));
na->rx_rings = na->tx_rings + n;
bcopy(na, buf, sizeof(*na));
ifp->if_capabilities |= IFCAP_NETMAP;
}
D("%s for %s", buf ? "ok" : "failed", ifp->if_xname);
return (buf ? 0 : ENOMEM);
}
/*
* Free the allocated memory linked to the given ``netmap_adapter``
* object.
*/
void
netmap_detach(struct ifnet *ifp)
{
u_int i;
struct netmap_adapter *na = NA(ifp);
if (!na)
return;
for (i = 0; i < na->num_queues + 2; i++) {
knlist_destroy(&na->tx_rings[i].si.si_note);
knlist_destroy(&na->rx_rings[i].si.si_note);
}
bzero(na, sizeof(*na));
ifp->if_pspare[0] = NULL;
free(na, M_DEVBUF);
}
/*
* intercept packets coming from the network stack and present
* them to netmap as incoming packets on a separate ring.
* We are not locked when called.
*/
int
netmap_start(struct ifnet *ifp, struct mbuf *m)
{
struct netmap_adapter *na = NA(ifp);
u_int i, len, n = na->num_queues;
int error = EBUSY;
struct netmap_kring *kring = &na->rx_rings[n];
struct netmap_slot *slot;
len = m->m_pkthdr.len;
if (netmap_verbose & NM_VERB_HOST)
D("%s packet %d len %d from the stack", ifp->if_xname,
kring->nr_hwcur + kring->nr_hwavail, len);
na->nm_lock(ifp->if_softc, NETMAP_CORE_LOCK, 0);
if (kring->nr_hwavail >= (int)kring->nkr_num_slots - 1) {
D("stack ring %s full\n", ifp->if_xname);
goto done; /* no space */
}
if (len > na->buff_size) {
D("drop packet size %d > %d", len, na->buff_size);
goto done; /* too long for us */
}
/* compute the insert position */
i = kring->nr_hwcur + kring->nr_hwavail;
if (i >= kring->nkr_num_slots)
i -= kring->nkr_num_slots;
slot = &kring->ring->slot[i];
m_copydata(m, 0, len, NMB(slot));
slot->len = len;
kring->nr_hwavail++;
if (netmap_verbose & NM_VERB_HOST)
D("wake up host ring %s %d", na->ifp->if_xname, na->num_queues);
selwakeuppri(&kring->si, PI_NET);
error = 0;
done:
na->nm_lock(ifp->if_softc, NETMAP_CORE_UNLOCK, 0);
/* release the mbuf in either cases of success or failure. As an
* alternative, put the mbuf in a free list and free the list
* only when really necessary.
*/
m_freem(m);
return (error);
}
/*
* netmap_reset() is called by the driver routines when reinitializing
* a ring. The driver is in charge of locking to protect the kring.
* If netmap mode is not set just return NULL.
* Otherwise set NR_REINIT (in the ring and in na) to signal
* that a ring has been reinitialized,
* set cur = hwcur = 0 and avail = hwavail = num_slots - 1 .
* IT IS IMPORTANT to leave one slot free even in the tx ring because
* we rely on cur=hwcur only for empty rings.
* These are good defaults but can be overridden later in the device
* specific code if, after a reinit, the ring does not start from 0
* (e.g. if_em.c does this).
*
* XXX we shouldn't be touching the ring, but there is a
* race anyways and this is our best option.
*
* XXX setting na->flags makes the syscall code faster, as there is
* only one place to check. On the other hand, we will need a better
* way to notify multiple threads that rings have been reset.
* One way is to increment na->rst_count at each ring reset.
* Each thread in its own priv structure will keep a matching counter,
* and on a reset will acknowledge and clean its own rings.
*/
struct netmap_slot *
netmap_reset(struct netmap_adapter *na, enum txrx tx, int n,
u_int new_cur)
{
struct netmap_kring *kring;
struct netmap_ring *ring;
struct netmap_slot *slot;
u_int i;
if (na == NULL)
return NULL; /* no netmap support here */
if (!(na->ifp->if_capenable & IFCAP_NETMAP))
return NULL; /* nothing to reinitialize */
kring = tx == NR_TX ? na->tx_rings + n : na->rx_rings + n;
ring = kring->ring;
if (tx == NR_TX) {
/*
* The last argument is the new value of next_to_clean.
*
* In the TX ring, we have P pending transmissions (from
* next_to_clean to nr_hwcur) followed by nr_hwavail free slots.
* Generally we can use all the slots in the ring so
* P = ring_size - nr_hwavail hence (modulo ring_size):
* next_to_clean == nr_hwcur + nr_hwavail
*
* If, upon a reset, nr_hwavail == ring_size and next_to_clean
* does not change we have nothing to report. Otherwise some
* pending packets may be lost, or newly injected packets will.
*/
/* if hwcur does not change, nothing to report.
* otherwise remember the change so perhaps we can
* shift the block at the next reinit
*/
if (new_cur == kring->nr_hwcur &&
kring->nr_hwavail == kring->nkr_num_slots - 1) {
/* all ok */
D("+++ NR_REINIT ok on %s TX[%d]", na->ifp->if_xname, n);
} else {
D("+++ NR_REINIT set on %s TX[%d]", na->ifp->if_xname, n);
}
ring->flags |= NR_REINIT;
na->flags |= NR_REINIT;
ring->avail = kring->nr_hwavail = kring->nkr_num_slots - 1;
ring->cur = kring->nr_hwcur = new_cur;
} else {
/*
* The last argument is the next free slot.
* In the RX ring we have nr_hwavail full buffers starting
* from nr_hwcur.
* If nr_hwavail == 0 and nr_hwcur does not change we are ok
* otherwise we might be in trouble as the buffers are
* changing.
*/
if (new_cur == kring->nr_hwcur && kring->nr_hwavail == 0) {
/* all ok */
D("+++ NR_REINIT ok on %s RX[%d]", na->ifp->if_xname, n);
} else {
D("+++ NR_REINIT set on %s RX[%d]", na->ifp->if_xname, n);
}
ring->flags |= NR_REINIT;
na->flags |= NR_REINIT;
ring->avail = kring->nr_hwavail = 0; /* no data */
ring->cur = kring->nr_hwcur = new_cur;
}
slot = ring->slot;
/*
* Check that buffer indexes are correct. If we find a
* bogus value we are a bit in trouble because we cannot
* recover easily. Best we can do is (probably) persistently
* reset the ring.
*/
for (i = 0; i < kring->nkr_num_slots; i++) {
if (slot[i].buf_idx >= netmap_total_buffers) {
D("invalid buf_idx %d at slot %d", slot[i].buf_idx, i);
slot[i].buf_idx = 0; /* XXX reset */
}
/* XXX we don't really need to set the length */
slot[i].len = 0;
}
/* wakeup possible waiters, both on the ring and on the global
* selfd. Perhaps a bit early now but the device specific
* routine is locked so hopefully we won't have a race.
*/
selwakeuppri(&kring->si, PI_NET);
selwakeuppri(&kring[na->num_queues + 1 - n].si, PI_NET);
return kring->ring->slot;
}
static void
ns_dmamap_cb(__unused void *arg, __unused bus_dma_segment_t * segs,
__unused int nseg, __unused int error)
{
}
/* unload a bus_dmamap and create a new one. Used when the
* buffer in the slot is changed.
* XXX buflen is probably not needed, buffers have constant size.
*/
void
netmap_reload_map(bus_dma_tag_t tag, bus_dmamap_t map,
void *buf, bus_size_t buflen)
{
bus_addr_t paddr;
bus_dmamap_unload(tag, map);
bus_dmamap_load(tag, map, buf, buflen, ns_dmamap_cb, &paddr,
BUS_DMA_NOWAIT);
}
void
netmap_load_map(bus_dma_tag_t tag, bus_dmamap_t map,
void *buf, bus_size_t buflen)
{
bus_addr_t paddr;
bus_dmamap_load(tag, map, buf, buflen, ns_dmamap_cb, &paddr,
BUS_DMA_NOWAIT);
}
/*------ netmap memory allocator -------*/
/*
* Request for a chunk of memory.
*
* Memory objects are arranged into a list, hence we need to walk this
* list until we find an object with the needed amount of data free.
* This sounds like a completely inefficient implementation, but given
* the fact that data allocation is done once, we can handle it
* flawlessly.
*
* Return NULL on failure.
*/
static void *
netmap_malloc(size_t size, __unused const char *msg)
{
struct netmap_mem_obj *mem_obj, *new_mem_obj;
void *ret = NULL;
NMA_LOCK();
TAILQ_FOREACH(mem_obj, &netmap_mem_d->nm_molist, nmo_next) {
if (mem_obj->nmo_used != 0 || mem_obj->nmo_size < size)
continue;
new_mem_obj = malloc(sizeof(struct netmap_mem_obj), M_NETMAP,
M_WAITOK | M_ZERO);
TAILQ_INSERT_BEFORE(mem_obj, new_mem_obj, nmo_next);
new_mem_obj->nmo_used = 1;
new_mem_obj->nmo_size = size;
new_mem_obj->nmo_data = mem_obj->nmo_data;
memset(new_mem_obj->nmo_data, 0, new_mem_obj->nmo_size);
mem_obj->nmo_size -= size;
mem_obj->nmo_data = (char *) mem_obj->nmo_data + size;
if (mem_obj->nmo_size == 0) {
TAILQ_REMOVE(&netmap_mem_d->nm_molist, mem_obj,
nmo_next);
free(mem_obj, M_NETMAP);
}
ret = new_mem_obj->nmo_data;
break;
}
NMA_UNLOCK();
ND("%s: %d bytes at %p", msg, size, ret);
return (ret);
}
/*
* Return the memory to the allocator.
*
* While freeing a memory object, we try to merge adjacent chunks in
* order to reduce memory fragmentation.
*/
static void
netmap_free(void *addr, const char *msg)
{
size_t size;
struct netmap_mem_obj *cur, *prev, *next;
if (addr == NULL) {
D("NULL addr for %s", msg);
return;
}
NMA_LOCK();
TAILQ_FOREACH(cur, &netmap_mem_d->nm_molist, nmo_next) {
if (cur->nmo_data == addr && cur->nmo_used)
break;
}
if (cur == NULL) {
NMA_UNLOCK();
D("invalid addr %s %p", msg, addr);
return;
}
size = cur->nmo_size;
cur->nmo_used = 0;
/* merge current chunk of memory with the previous one,
if present. */
prev = TAILQ_PREV(cur, netmap_mem_obj_h, nmo_next);
if (prev && prev->nmo_used == 0) {
TAILQ_REMOVE(&netmap_mem_d->nm_molist, cur, nmo_next);
prev->nmo_size += cur->nmo_size;
free(cur, M_NETMAP);
cur = prev;
}
/* merge with the next one */
next = TAILQ_NEXT(cur, nmo_next);
if (next && next->nmo_used == 0) {
TAILQ_REMOVE(&netmap_mem_d->nm_molist, next, nmo_next);
cur->nmo_size += next->nmo_size;
free(next, M_NETMAP);
}
NMA_UNLOCK();
ND("freed %s %d bytes at %p", msg, size, addr);
}
/*
* Initialize the memory allocator.
*
* Create the descriptor for the memory , allocate the pool of memory
* and initialize the list of memory objects with a single chunk
* containing the whole pre-allocated memory marked as free.
*
* Start with a large size, then halve as needed if we fail to
* allocate the block. While halving, always add one extra page
* because buffers 0 and 1 are used for special purposes.
* Return 0 on success, errno otherwise.
*/
static int
netmap_memory_init(void)
{
struct netmap_mem_obj *mem_obj;
void *buf = NULL;
int i, n, sz = NETMAP_MEMORY_SIZE;
int extra_sz = 0; // space for rings and two spare buffers
for (; !buf && sz >= 1<<20; sz >>=1) {
extra_sz = sz/200;
extra_sz = (extra_sz + 2*PAGE_SIZE - 1) & ~(PAGE_SIZE-1);
buf = contigmalloc(sz + extra_sz,
M_NETMAP,
M_WAITOK | M_ZERO,
0, /* low address */
-1UL, /* high address */
PAGE_SIZE, /* alignment */
0 /* boundary */
);
}
if (buf == NULL)
return (ENOMEM);
sz += extra_sz;
netmap_mem_d = malloc(sizeof(struct netmap_mem_d), M_NETMAP,
M_WAITOK | M_ZERO);
mtx_init(&netmap_mem_d->nm_mtx, "netmap memory allocator lock", NULL,
MTX_DEF);
TAILQ_INIT(&netmap_mem_d->nm_molist);
netmap_mem_d->nm_buffer = buf;
netmap_mem_d->nm_totalsize = sz;
/*
* A buffer takes 2k, a slot takes 8 bytes + ring overhead,
* so the ratio is 200:1. In other words, we can use 1/200 of
* the memory for the rings, and the rest for the buffers,
* and be sure we never run out.
*/
netmap_mem_d->nm_size = sz/200;
netmap_mem_d->nm_buf_start =
(netmap_mem_d->nm_size + PAGE_SIZE - 1) & ~(PAGE_SIZE-1);
netmap_mem_d->nm_buf_len = sz - netmap_mem_d->nm_buf_start;
nm_buf_pool.base = netmap_mem_d->nm_buffer;
nm_buf_pool.base += netmap_mem_d->nm_buf_start;
netmap_buffer_base = nm_buf_pool.base;
D("netmap_buffer_base %p (offset %d)",
netmap_buffer_base, netmap_mem_d->nm_buf_start);
/* number of buffers, they all start as free */
netmap_total_buffers = nm_buf_pool.total_buffers =
netmap_mem_d->nm_buf_len / NETMAP_BUF_SIZE;
nm_buf_pool.bufsize = NETMAP_BUF_SIZE;
D("Have %d MB, use %dKB for rings, %d buffers at %p",
(sz >> 20), (netmap_mem_d->nm_size >> 10),
nm_buf_pool.total_buffers, nm_buf_pool.base);
/* allocate and initialize the bitmap. Entry 0 is considered
* always busy (used as default when there are no buffers left).
*/
n = (nm_buf_pool.total_buffers + 31) / 32;
nm_buf_pool.bitmap = malloc(sizeof(uint32_t) * n, M_NETMAP,
M_WAITOK | M_ZERO);
nm_buf_pool.bitmap[0] = ~3; /* slot 0 and 1 always busy */
for (i = 1; i < n; i++)
nm_buf_pool.bitmap[i] = ~0;
nm_buf_pool.free = nm_buf_pool.total_buffers - 2;
mem_obj = malloc(sizeof(struct netmap_mem_obj), M_NETMAP,
M_WAITOK | M_ZERO);
TAILQ_INSERT_HEAD(&netmap_mem_d->nm_molist, mem_obj, nmo_next);
mem_obj->nmo_used = 0;
mem_obj->nmo_size = netmap_mem_d->nm_size;
mem_obj->nmo_data = netmap_mem_d->nm_buffer;
return (0);
}
/*
* Finalize the memory allocator.
*
* Free all the memory objects contained inside the list, and deallocate
* the pool of memory; finally free the memory allocator descriptor.
*/
static void
netmap_memory_fini(void)
{
struct netmap_mem_obj *mem_obj;
while (!TAILQ_EMPTY(&netmap_mem_d->nm_molist)) {
mem_obj = TAILQ_FIRST(&netmap_mem_d->nm_molist);
TAILQ_REMOVE(&netmap_mem_d->nm_molist, mem_obj, nmo_next);
if (mem_obj->nmo_used == 1) {
printf("netmap: leaked %d bytes at %p\n",
mem_obj->nmo_size,
mem_obj->nmo_data);
}
free(mem_obj, M_NETMAP);
}
contigfree(netmap_mem_d->nm_buffer, netmap_mem_d->nm_totalsize, M_NETMAP);
// XXX mutex_destroy(nm_mtx);
free(netmap_mem_d, M_NETMAP);
}
/*
* Module loader.
*
* Create the /dev/netmap device and initialize all global
* variables.
*
* Return 0 on success, errno on failure.
*/
static int
netmap_init(void)
{
int error;
error = netmap_memory_init();
if (error != 0) {
printf("netmap: unable to initialize the memory allocator.");
return (error);
}
printf("netmap: loaded module with %d Mbytes\n",
netmap_mem_d->nm_totalsize >> 20);
netmap_dev = make_dev(&netmap_cdevsw, 0, UID_ROOT, GID_WHEEL, 0660,
"netmap");
return (0);
}
/*
* Module unloader.
*
* Free all the memory, and destroy the ``/dev/netmap`` device.
*/
static void
netmap_fini(void)
{
destroy_dev(netmap_dev);
netmap_memory_fini();
printf("netmap: unloaded module.\n");
}
/*
* Kernel entry point.
*
* Initialize/finalize the module and return.
*
* Return 0 on success, errno on failure.
*/
static int
netmap_loader(__unused struct module *module, int event, __unused void *arg)
{
int error = 0;
switch (event) {
case MOD_LOAD:
error = netmap_init();
break;
case MOD_UNLOAD:
netmap_fini();
break;
default:
error = EOPNOTSUPP;
break;
}
return (error);
}
DEV_MODULE(netmap, netmap_loader, NULL);