freebsd-dev/sys/boot/i386/loader/help.i386

################################################################################
# TACPI DControl ACPI module behaviour

	$acpi_load

	If set, the ACPI module will be loaded.  Clear it with

	unset acpi_load

	$hint.acpi.0.disabled="1"

	If set, the ACPI module won't be loaded.

	Note that the ACPI autodetection sets a number of hints to
	pass information to the ACPI module.  These should not be 
	overridden, or system behaviour will be undefined.


################################################################################
# Treboot DReboot the system

	reboot

	Causes the system to immediately reboot.

################################################################################
# Theap DDisplay memory management statistics

	heap

	Requests debugging output from the heap manager.  For debugging use
	only.

################################################################################
# Tset Snum_ide_disks DSet the number of IDE disks

	NOTE: this variable is deprecated, use root_disk_unit instead.

	set num_ide_disks=<value>

	When booting from a SCSI disk on a system with one or more IDE disks,
	and where the IDE disks are the default boot device, it is necessary
	to tell the kernel how many IDE disks there are in order to have it
	correctly locate the SCSI disk you are booting from.

################################################################################
# Tset Sboot_userconfig DStart Userconfig

	set boot_userconfig

	Requests that the kernel's interactive device configuration program
	be run when the kernel is booted.

################################################################################
# Tset Sroot_disk_unit DForce the root disk unit number.

	set root_disk_unit=<value>

	If the code which detects the disk unit number for the root disk is
	confused, eg. by a mix of SCSI and IDE disks, or IDE disks with
	gaps in the sequence (eg. no primary slave), the unit number can be
	forced by setting this variable.

################################################################################
Mention that the ACPI module load can be disabled by unsetting $acpi_load 2001-08-30 01:05:28 +00:00			`################################################################################`
			`# TACPI DControl ACPI module behaviour`

			`$acpi_load`

			`If set, the ACPI module will be loaded. Clear it with`

			`unset acpi_load`

s/hint.acpi.0.disable/hint.acpi.0.disabled/ Fix device hints entry for disabling acpi(4). This also should fix the arbitration with apm(4) when both drivers are enabled. Note that your /boot/device.hints needs to be updated if you want to stop auto-loading acpi.ko or disable acpi(4). 2002-08-30 11:11:07 +00:00			`$hint.acpi.0.disabled="1"`
Add help about hint.acpi.0.disable. 2002-08-09 20:07:51 +00:00
			`If set, the ACPI module won't be loaded.`

Mention that the ACPI module load can be disabled by unsetting $acpi_load 2001-08-30 01:05:28 +00:00			`Note that the ACPI autodetection sets a number of hints to`
			`pass information to the ACPI module. These should not be`
			`overridden, or system behaviour will be undefined.`


- Add a new command 'lsdev' to list devices which might be likely to host filesystems. - New 'help' command and data in the help.* files (not yet installed), provides topic and subtopic help, indexes, etc. - Don't crash if the user tries to set an invalid console. Be helpful instead. - Expand tabs (badly) on the i386 video console. - Some minor cosmetic changes. 1998-10-31 02:53:12 +00:00			`################################################################################`
			`# Treboot DReboot the system`

			`reboot`

			`Causes the system to immediately reboot.`

			`################################################################################`
			`# Theap DDisplay memory management statistics`

			`heap`

			`Requests debugging output from the heap manager. For debugging use`
			`only.`

			`################################################################################`
Reformat help to improve subtopic display appearance, other minor cleaning. The 'help' command in the loader should now be usable and hopefully informative. 1998-12-15 14:32:17 +00:00			`# Tset Snum_ide_disks DSet the number of IDE disks`
Build the composite help file from the generic and architecture-specific help files, sorting topics and subtopics to allow maximum flexibility. 1998-12-15 14:21:30 +00:00
Document root_disk_unit 1999-01-24 00:12:17 +00:00			`NOTE: this variable is deprecated, use root_disk_unit instead.`

Build the composite help file from the generic and architecture-specific help files, sorting topics and subtopics to allow maximum flexibility. 1998-12-15 14:21:30 +00:00			`set num_ide_disks=<value>`

			`When booting from a SCSI disk on a system with one or more IDE disks,`
			`and where the IDE disks are the default boot device, it is necessary`
			`to tell the kernel how many IDE disks there are in order to have it`
			`correctly locate the SCSI disk you are booting from.`

			`################################################################################`
Reformat help to improve subtopic display appearance, other minor cleaning. The 'help' command in the loader should now be usable and hopefully informative. 1998-12-15 14:32:17 +00:00			`# Tset Sboot_userconfig DStart Userconfig`
Build the composite help file from the generic and architecture-specific help files, sorting topics and subtopics to allow maximum flexibility. 1998-12-15 14:21:30 +00:00
			`set boot_userconfig`

Reformat help to improve subtopic display appearance, other minor cleaning. The 'help' command in the loader should now be usable and hopefully informative. 1998-12-15 14:32:17 +00:00			`Requests that the kernel's interactive device configuration program`
			`be run when the kernel is booted.`
Build the composite help file from the generic and architecture-specific help files, sorting topics and subtopics to allow maximum flexibility. 1998-12-15 14:21:30 +00:00
			`################################################################################`
Document root_disk_unit 1999-01-24 00:12:17 +00:00			`# Tset Sroot_disk_unit DForce the root disk unit number.`

			`set root_disk_unit=<value>`

			`If the code which detects the disk unit number for the root disk is`
			`confused, eg. by a mix of SCSI and IDE disks, or IDE disks with`
			`gaps in the sequence (eg. no primary slave), the unit number can be`
			`forced by setting this variable.`

			`################################################################################`