freebsd-dev/usr.sbin/jail/jail.c

972 lines
22 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1999 Poul-Henning Kamp.
* Copyright (c) 2009-2011 James Gritton
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
2003-07-06 12:44:11 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/types.h>
#include <sys/stat.h>
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
#include <sys/socket.h>
#include <sys/sysctl.h>
#include <arpa/inet.h>
#include <netinet/in.h>
#include <err.h>
#include <errno.h>
#include <stdarg.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
This Implements the mumbled about "Jail" feature. This is a seriously beefed up chroot kind of thing. The process is jailed along the same lines as a chroot does it, but with additional tough restrictions imposed on what the superuser can do. For all I know, it is safe to hand over the root bit inside a prison to the customer living in that prison, this is what it was developed for in fact: "real virtual servers". Each prison has an ip number associated with it, which all IP communications will be coerced to use and each prison has its own hostname. Needless to say, you need more RAM this way, but the advantage is that each customer can run their own particular version of apache and not stomp on the toes of their neighbors. It generally does what one would expect, but setting up a jail still takes a little knowledge. A few notes: I have no scripts for setting up a jail, don't ask me for them. The IP number should be an alias on one of the interfaces. mount a /proc in each jail, it will make ps more useable. /proc/<pid>/status tells the hostname of the prison for jailed processes. Quotas are only sensible if you have a mountpoint per prison. There are no privisions for stopping resource-hogging. Some "#ifdef INET" and similar may be missing (send patches!) If somebody wants to take it from here and develop it into more of a "virtual machine" they should be most welcome! Tools, comments, patches & documentation most welcome. Have fun... Sponsored by: http://www.rndassociates.com/ Run for almost a year by: http://www.servetheweb.com/
1999-04-28 11:38:52 +00:00
#include "jailp.h"
#define JP_RDTUN(jp) (((jp)->jp_ctltype & CTLFLAG_RDTUN) == CTLFLAG_RDTUN)
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
struct permspec {
const char *name;
enum intparam ipnum;
int rev;
};
const char *cfname;
int note_remove;
int verbose;
static void clear_persist(struct cfjail *j);
static int update_jail(struct cfjail *j);
static int rdtun_params(struct cfjail *j, int dofail);
static void running_jid(struct cfjail *j, int dflag);
static int jailparam_set_note(const struct cfjail *j, struct jailparam *jp,
unsigned njp, int flags);
static void print_jail(FILE *fp, struct cfjail *j, int oldcl);
static void print_param(FILE *fp, const struct cfparam *p, int sep, int doname);
static void quoted_print(FILE *fp, char *str);
static void usage(void);
static struct permspec perm_sysctl[] = {
{ "security.jail.set_hostname_allowed", KP_ALLOW_SET_HOSTNAME, 0 },
{ "security.jail.sysvipc_allowed", KP_ALLOW_SYSVIPC, 0 },
{ "security.jail.allow_raw_sockets", KP_ALLOW_RAW_SOCKETS, 0 },
{ "security.jail.chflags_allowed", KP_ALLOW_CHFLAGS, 0 },
{ "security.jail.mount_allowed", KP_ALLOW_MOUNT, 0 },
{ "security.jail.socket_unixiproute_only", KP_ALLOW_SOCKET_AF, 1 },
};
static const enum intparam startcommands[] = {
0,
#ifdef INET
IP__IP4_IFADDR,
#endif
#ifdef INET6
IP__IP6_IFADDR,
#endif
IP_MOUNT,
IP__MOUNT_FROM_FSTAB,
IP_MOUNT_DEVFS,
IP_EXEC_PRESTART,
IP__OP,
IP_VNET_INTERFACE,
IP_EXEC_START,
IP_COMMAND,
IP_EXEC_POSTSTART,
0
};
static const enum intparam stopcommands[] = {
0,
IP_EXEC_PRESTOP,
IP_EXEC_STOP,
IP_STOP_TIMEOUT,
IP__OP,
IP_EXEC_POSTSTOP,
IP_MOUNT_DEVFS,
IP__MOUNT_FROM_FSTAB,
IP_MOUNT,
#ifdef INET6
IP__IP6_IFADDR,
#endif
#ifdef INET
IP__IP4_IFADDR,
#endif
0
};
This Implements the mumbled about "Jail" feature. This is a seriously beefed up chroot kind of thing. The process is jailed along the same lines as a chroot does it, but with additional tough restrictions imposed on what the superuser can do. For all I know, it is safe to hand over the root bit inside a prison to the customer living in that prison, this is what it was developed for in fact: "real virtual servers". Each prison has an ip number associated with it, which all IP communications will be coerced to use and each prison has its own hostname. Needless to say, you need more RAM this way, but the advantage is that each customer can run their own particular version of apache and not stomp on the toes of their neighbors. It generally does what one would expect, but setting up a jail still takes a little knowledge. A few notes: I have no scripts for setting up a jail, don't ask me for them. The IP number should be an alias on one of the interfaces. mount a /proc in each jail, it will make ps more useable. /proc/<pid>/status tells the hostname of the prison for jailed processes. Quotas are only sensible if you have a mountpoint per prison. There are no privisions for stopping resource-hogging. Some "#ifdef INET" and similar may be missing (send patches!) If somebody wants to take it from here and develop it into more of a "virtual machine" they should be most welcome! Tools, comments, patches & documentation most welcome. Have fun... Sponsored by: http://www.rndassociates.com/ Run for almost a year by: http://www.servetheweb.com/
1999-04-28 11:38:52 +00:00
int
main(int argc, char **argv)
{
struct stat st;
FILE *jfp;
struct cfjail *j;
char *JidFile;
size_t sysvallen;
unsigned op, pi;
int ch, docf, error, i, oldcl, sysval;
int dflag, iflag, Rflag;
char enforce_statfs[4];
#if defined(INET) || defined(INET6)
char *cs, *ncs;
#endif
#if defined(INET) && defined(INET6)
struct in6_addr addr6;
#endif
op = 0;
dflag = iflag = Rflag = 0;
docf = 1;
cfname = CONF_FILE;
JidFile = NULL;
while ((ch = getopt(argc, argv, "cdf:hiJ:lmn:p:qrRs:U:v")) != -1) {
switch (ch) {
case 'c':
op |= JF_START;
break;
case 'd':
dflag = 1;
break;
case 'f':
cfname = optarg;
break;
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
case 'h':
#if defined(INET) || defined(INET6)
add_param(NULL, NULL, IP_IP_HOSTNAME, NULL);
#endif
docf = 0;
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
break;
case 'i':
iflag = 1;
verbose = -1;
break;
case 'J':
JidFile = optarg;
break;
case 'l':
add_param(NULL, NULL, IP_EXEC_CLEAN, NULL);
docf = 0;
break;
case 'm':
op |= JF_SET;
break;
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
case 'n':
add_param(NULL, NULL, KP_NAME, optarg);
docf = 0;
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
break;
case 'p':
paralimit = strtol(optarg, NULL, 10);
if (paralimit == 0)
paralimit = -1;
break;
case 'q':
verbose = -1;
break;
case 'r':
op |= JF_STOP;
break;
case 'R':
op |= JF_STOP;
Rflag = 1;
break;
case 's':
add_param(NULL, NULL, KP_SECURELEVEL, optarg);
docf = 0;
break;
case 'u':
add_param(NULL, NULL, IP_EXEC_JAIL_USER, optarg);
add_param(NULL, NULL, IP_EXEC_SYSTEM_JAIL_USER, NULL);
docf = 0;
break;
case 'U':
add_param(NULL, NULL, IP_EXEC_JAIL_USER, optarg);
add_param(NULL, NULL, IP_EXEC_SYSTEM_JAIL_USER,
"false");
docf = 0;
break;
case 'v':
verbose = 1;
break;
default:
usage();
}
}
argc -= optind;
argv += optind;
/* Find out which of the four command line styles this is. */
oldcl = 0;
if (!op) {
/* Old-style command line with four fixed parameters */
if (argc < 4 || argv[0][0] != '/')
usage();
op = JF_START;
docf = 0;
oldcl = 1;
add_param(NULL, NULL, KP_PATH, argv[0]);
add_param(NULL, NULL, KP_HOST_HOSTNAME, argv[1]);
#if defined(INET) || defined(INET6)
if (argv[2][0] != '\0') {
for (cs = argv[2];; cs = ncs + 1) {
ncs = strchr(cs, ',');
if (ncs)
*ncs = '\0';
add_param(NULL, NULL,
#if defined(INET) && defined(INET6)
inet_pton(AF_INET6, cs, &addr6) == 1
? KP_IP6_ADDR : KP_IP4_ADDR,
#elif defined(INET)
KP_IP4_ADDR,
#elif defined(INET6)
KP_IP6_ADDR,
#endif
cs);
if (!ncs)
break;
}
}
#endif
for (i = 3; i < argc; i++)
add_param(NULL, NULL, IP_COMMAND, argv[i]);
/* Emulate the defaults from security.jail.* sysctls. */
sysvallen = sizeof(sysval);
if (sysctlbyname("security.jail.jailed", &sysval, &sysvallen,
NULL, 0) == 0 && sysval == 0) {
for (pi = 0; pi < sizeof(perm_sysctl) /
sizeof(perm_sysctl[0]); pi++) {
sysvallen = sizeof(sysval);
if (sysctlbyname(perm_sysctl[pi].name,
&sysval, &sysvallen, NULL, 0) == 0)
add_param(NULL, NULL,
perm_sysctl[pi].ipnum,
(sysval ? 1 : 0) ^
perm_sysctl[pi].rev
? NULL : "false");
}
sysvallen = sizeof(sysval);
if (sysctlbyname("security.jail.enforce_statfs",
&sysval, &sysvallen, NULL, 0) == 0) {
snprintf(enforce_statfs,
sizeof(enforce_statfs), "%d", sysval);
add_param(NULL, NULL, KP_ENFORCE_STATFS,
enforce_statfs);
}
}
} else if (op == JF_STOP) {
/* Jail remove, perhaps using the config file */
if (!docf || argc == 0)
usage();
if (!Rflag)
for (i = 0; i < argc; i++)
if (strchr(argv[i], '='))
usage();
if ((docf = !Rflag &&
(!strcmp(cfname, "-") || stat(cfname, &st) == 0)))
load_config();
note_remove = docf || argc > 1 || wild_jail_name(argv[0]);
} else if (argc > 1 || (argc == 1 && strchr(argv[0], '='))) {
/* Single jail specified on the command line */
if (Rflag)
usage();
docf = 0;
for (i = 0; i < argc; i++) {
if (!strncmp(argv[i], "command", 7) &&
(argv[i][7] == '\0' || argv[i][7] == '=')) {
if (argv[i][7] == '=')
add_param(NULL, NULL, IP_COMMAND,
argv[i] + 8);
for (i++; i < argc; i++)
add_param(NULL, NULL, IP_COMMAND,
argv[i]);
break;
}
add_param(NULL, NULL, 0, argv[i]);
}
} else {
/* From the config file, perhaps with a specified jail */
if (Rflag || !docf)
usage();
load_config();
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
}
/* Find out which jails will be run. */
dep_setup(docf);
error = 0;
if (op == JF_STOP) {
for (i = 0; i < argc; i++)
if (start_state(argv[i], op, Rflag) < 0)
error = 1;
} else {
if (start_state(docf ? argv[0] : NULL, op, 0) < 0)
exit(1);
}
jfp = NULL;
if (JidFile != NULL) {
jfp = fopen(JidFile, "w");
if (jfp == NULL)
err(1, "open %s", JidFile);
setlinebuf(jfp);
}
setlinebuf(stdout);
/*
* The main loop: Get an available jail and perform the required
* operation on it. When that is done, the jail may be finished,
* or it may go back for the next step.
*/
while ((j = next_jail()))
{
if (j->flags & JF_FAILED) {
error = 1;
if (j->comparam == NULL) {
dep_done(j, 0);
continue;
}
}
if (!(j->flags & JF_PARAMS))
{
j->flags |= JF_PARAMS;
if (dflag)
add_param(j, NULL, IP_ALLOW_DYING, NULL);
if (check_intparams(j) < 0)
continue;
if ((j->flags & (JF_START | JF_SET)) &&
import_params(j) < 0)
continue;
}
if (!j->jid)
running_jid(j,
(j->flags & (JF_SET | JF_DEPEND)) == JF_SET
? dflag || bool_param(j->intparams[IP_ALLOW_DYING])
: 0);
if (finish_command(j))
continue;
switch (j->flags & JF_OP_MASK) {
/*
* These operations just turn into a different op
* depending on the jail's current status.
*/
case JF_START_SET:
j->flags = j->jid < 0 ? JF_START : JF_SET;
break;
case JF_SET_RESTART:
if (j->jid < 0) {
warnx("\"%s\" not found", j->name);
failed(j);
continue;
}
j->flags = rdtun_params(j, 0) ? JF_RESTART : JF_SET;
if (j->flags == JF_RESTART)
dep_reset(j);
break;
case JF_START_SET_RESTART:
j->flags = j->jid < 0 ? JF_START
: rdtun_params(j, 0) ? JF_RESTART : JF_SET;
if (j->flags == JF_RESTART)
dep_reset(j);
}
switch (j->flags & JF_OP_MASK) {
case JF_START:
if (j->comparam == NULL) {
if (j->jid > 0 &&
!(j->flags & (JF_DEPEND | JF_WILD))) {
warnx("\"%s\" already exists", j->name);
failed(j);
continue;
}
if (dep_check(j))
continue;
if (j->jid > 0)
goto jail_create_done;
j->comparam = startcommands;
j->comstring = NULL;
}
if (next_command(j))
continue;
jail_create_done:
clear_persist(j);
if (iflag)
printf("%d\n", j->jid);
if (jfp != NULL)
print_jail(jfp, j, oldcl);
dep_done(j, 0);
break;
case JF_SET:
if (j->jid < 0 && !(j->flags & JF_DEPEND)) {
warnx("\"%s\" not found", j->name);
failed(j);
continue;
}
if (dep_check(j))
continue;
if (!(j->flags & JF_DEPEND)) {
if (rdtun_params(j, 1) < 0 ||
update_jail(j) < 0)
continue;
if (verbose >= 0 && (j->name || verbose > 0))
jail_note(j, "updated\n");
}
dep_done(j, 0);
break;
case JF_STOP:
case JF_RESTART:
if (j->comparam == NULL) {
if (dep_check(j))
continue;
if (j->jid < 0) {
if (!(j->flags & (JF_DEPEND | JF_WILD))
&& verbose >= 0)
warnx("\"%s\" not found",
j->name);
goto jail_remove_done;
}
j->comparam = stopcommands;
j->comstring = NULL;
} else if ((j->flags & JF_FAILED) && j->jid > 0)
goto jail_remove_done;
if (next_command(j))
continue;
jail_remove_done:
dep_done(j, 0);
if ((j->flags & (JF_START | JF_FAILED)) == JF_START) {
j->comparam = NULL;
j->flags &= ~JF_STOP;
dep_reset(j);
requeue(j, j->ndeps ? &depend : &ready);
}
break;
}
}
if (jfp != NULL)
fclose(jfp);
exit(error);
}
/*
* Mark a jail's failure for future handling.
*/
void
failed(struct cfjail *j)
{
j->flags |= JF_FAILED;
TAILQ_REMOVE(j->queue, j, tq);
TAILQ_INSERT_HEAD(&ready, j, tq);
j->queue = &ready;
}
/*
* Exit slightly more gracefully when out of memory.
*/
void *
emalloc(size_t size)
{
void *p;
p = malloc(size);
if (!p)
err(1, "malloc");
return p;
}
void *
erealloc(void *ptr, size_t size)
{
void *p;
p = realloc(ptr, size);
if (!p)
err(1, "malloc");
return p;
}
char *
estrdup(const char *str)
{
char *ns;
ns = strdup(str);
if (!ns)
err(1, "malloc");
return ns;
}
/*
* Print a message including an optional jail name.
*/
void
jail_note(const struct cfjail *j, const char *fmt, ...)
{
va_list ap, tap;
char *cs;
size_t len;
va_start(ap, fmt);
va_copy(tap, ap);
len = vsnprintf(NULL, 0, fmt, tap);
va_end(tap);
cs = alloca(len + 1);
(void)vsnprintf(cs, len + 1, fmt, ap);
va_end(ap);
if (j->name)
printf("%s: %s", j->name, cs);
else
printf("%s", cs);
}
/*
* Print a warning message including an optional jail name.
*/
void
jail_warnx(const struct cfjail *j, const char *fmt, ...)
{
va_list ap, tap;
char *cs;
size_t len;
va_start(ap, fmt);
va_copy(tap, ap);
len = vsnprintf(NULL, 0, fmt, tap);
va_end(tap);
cs = alloca(len + 1);
(void)vsnprintf(cs, len + 1, fmt, ap);
va_end(ap);
if (j->name)
warnx("%s: %s", j->name, cs);
else
warnx("%s", cs);
}
/*
* Create a new jail.
*/
int
create_jail(struct cfjail *j)
{
struct iovec jiov[4];
struct stat st;
struct jailparam *jp, *setparams, *setparams2, *sjp;
const char *path;
int dopersist, ns, jid, dying, didfail;
/*
* Check the jail's path, with a better error message than jail_set
* gives.
*/
if ((path = string_param(j->intparams[KP_PATH]))) {
if (j->name != NULL && path[0] != '/') {
jail_warnx(j, "path %s: not an absolute pathname",
path);
return -1;
}
if (stat(path, &st) < 0) {
jail_warnx(j, "path %s: %s", path, strerror(errno));
return -1;
}
if (!S_ISDIR(st.st_mode)) {
jail_warnx(j, "path %s: %s", path, strerror(ENOTDIR));
return -1;
}
}
/*
* Copy all the parameters, except that "persist" is always set when
* there are commands to run later.
*/
dopersist = !bool_param(j->intparams[KP_PERSIST]) &&
(j->intparams[IP_EXEC_START] || j->intparams[IP_COMMAND] ||
j->intparams[IP_EXEC_POSTSTART]);
sjp = setparams =
alloca((j->njp + dopersist) * sizeof(struct jailparam));
if (dopersist && jailparam_init(sjp++, "persist") < 0) {
jail_warnx(j, "%s", jail_errmsg);
return -1;
}
for (jp = j->jp; jp < j->jp + j->njp; jp++)
if (!dopersist || !equalopts(jp->jp_name, "persist"))
*sjp++ = *jp;
ns = sjp - setparams;
didfail = 0;
j->jid = jailparam_set_note(j, setparams, ns, JAIL_CREATE);
if (j->jid < 0 && errno == EEXIST &&
bool_param(j->intparams[IP_ALLOW_DYING]) &&
int_param(j->intparams[KP_JID], &jid) && jid != 0) {
/*
* The jail already exists, but may be dying.
* Make sure it is, in which case an update is appropriate.
*/
*(const void **)&jiov[0].iov_base = "jid";
jiov[0].iov_len = sizeof("jid");
jiov[1].iov_base = &jid;
jiov[1].iov_len = sizeof(jid);
*(const void **)&jiov[2].iov_base = "dying";
jiov[2].iov_len = sizeof("dying");
jiov[3].iov_base = &dying;
jiov[3].iov_len = sizeof(dying);
if (jail_get(jiov, 4, JAIL_DYING) < 0) {
/*
* It could be that the jail just barely finished
* dying, or it could be that the jid never existed
* but the name does. In either case, another try
* at creating the jail should do the right thing.
*/
if (errno == ENOENT)
j->jid = jailparam_set_note(j, setparams, ns,
JAIL_CREATE);
} else if (dying) {
j->jid = jid;
if (rdtun_params(j, 1) < 0) {
j->jid = -1;
didfail = 1;
} else {
sjp = setparams2 = alloca((j->njp + dopersist) *
sizeof(struct jailparam));
for (jp = setparams; jp < setparams + ns; jp++)
if (!JP_RDTUN(jp) ||
!strcmp(jp->jp_name, "jid"))
*sjp++ = *jp;
j->jid = jailparam_set_note(j, setparams2,
sjp - setparams2, JAIL_UPDATE | JAIL_DYING);
/*
* Again, perhaps the jail just finished dying.
*/
if (j->jid < 0 && errno == ENOENT)
j->jid = jailparam_set_note(j,
setparams, ns, JAIL_CREATE);
}
}
}
if (j->jid < 0 && !didfail) {
jail_warnx(j, "%s", jail_errmsg);
failed(j);
}
if (dopersist) {
jailparam_free(setparams, 1);
if (j->jid > 0)
j->flags |= JF_PERSIST;
}
return j->jid;
This Implements the mumbled about "Jail" feature. This is a seriously beefed up chroot kind of thing. The process is jailed along the same lines as a chroot does it, but with additional tough restrictions imposed on what the superuser can do. For all I know, it is safe to hand over the root bit inside a prison to the customer living in that prison, this is what it was developed for in fact: "real virtual servers". Each prison has an ip number associated with it, which all IP communications will be coerced to use and each prison has its own hostname. Needless to say, you need more RAM this way, but the advantage is that each customer can run their own particular version of apache and not stomp on the toes of their neighbors. It generally does what one would expect, but setting up a jail still takes a little knowledge. A few notes: I have no scripts for setting up a jail, don't ask me for them. The IP number should be an alias on one of the interfaces. mount a /proc in each jail, it will make ps more useable. /proc/<pid>/status tells the hostname of the prison for jailed processes. Quotas are only sensible if you have a mountpoint per prison. There are no privisions for stopping resource-hogging. Some "#ifdef INET" and similar may be missing (send patches!) If somebody wants to take it from here and develop it into more of a "virtual machine" they should be most welcome! Tools, comments, patches & documentation most welcome. Have fun... Sponsored by: http://www.rndassociates.com/ Run for almost a year by: http://www.servetheweb.com/
1999-04-28 11:38:52 +00:00
}
/*
* Remove a temporarily set "persist" parameter.
*/
static void
clear_persist(struct cfjail *j)
{
struct iovec jiov[4];
int jid;
if (!(j->flags & JF_PERSIST))
return;
j->flags &= ~JF_PERSIST;
*(const void **)&jiov[0].iov_base = "jid";
jiov[0].iov_len = sizeof("jid");
jiov[1].iov_base = &j->jid;
jiov[1].iov_len = sizeof(j->jid);
*(const void **)&jiov[2].iov_base = "nopersist";
jiov[2].iov_len = sizeof("nopersist");
jiov[3].iov_base = NULL;
jiov[3].iov_len = 0;
jid = jail_set(jiov, 4, JAIL_UPDATE);
if (verbose > 0)
jail_note(j, "jail_set(JAIL_UPDATE) jid=%d nopersist%s%s\n",
j->jid, jid < 0 ? ": " : "",
jid < 0 ? strerror(errno) : "");
}
/*
* Set a jail's parameters.
*/
static int
update_jail(struct cfjail *j)
{
struct jailparam *jp, *setparams, *sjp;
int ns, jid;
ns = 0;
for (jp = j->jp; jp < j->jp + j->njp; jp++)
if (!JP_RDTUN(jp))
ns++;
if (ns == 0)
return 0;
sjp = setparams = alloca(++ns * sizeof(struct jailparam));
if (jailparam_init(sjp, "jid") < 0 ||
jailparam_import_raw(sjp, &j->jid, sizeof j->jid) < 0) {
jail_warnx(j, "%s", jail_errmsg);
failed(j);
return -1;
}
for (jp = j->jp; jp < j->jp + j->njp; jp++)
if (!JP_RDTUN(jp))
*++sjp = *jp;
jid = jailparam_set_note(j, setparams, ns,
bool_param(j->intparams[IP_ALLOW_DYING])
? JAIL_UPDATE | JAIL_DYING : JAIL_UPDATE);
if (jid < 0) {
jail_warnx(j, "%s", jail_errmsg);
failed(j);
}
jailparam_free(setparams, 1);
return jid;
}
/*
* Return if a jail set would change any create-only parameters.
*/
static int
rdtun_params(struct cfjail *j, int dofail)
{
struct jailparam *jp, *rtparams, *rtjp;
int nrt, rval;
if (j->flags & JF_RDTUN)
return 0;
j->flags |= JF_RDTUN;
nrt = 0;
for (jp = j->jp; jp < j->jp + j->njp; jp++)
if (JP_RDTUN(jp) && strcmp(jp->jp_name, "jid"))
nrt++;
if (nrt == 0)
return 0;
rtjp = rtparams = alloca(++nrt * sizeof(struct jailparam));
if (jailparam_init(rtjp, "jid") < 0 ||
jailparam_import_raw(rtjp, &j->jid, sizeof j->jid) < 0) {
jail_warnx(j, "%s", jail_errmsg);
exit(1);
}
for (jp = j->jp; jp < j->jp + j->njp; jp++)
if (JP_RDTUN(jp) && strcmp(jp->jp_name, "jid"))
*++rtjp = *jp;
rval = 0;
if (jailparam_get(rtparams, nrt,
bool_param(j->intparams[IP_ALLOW_DYING]) ? JAIL_DYING : 0) > 0) {
rtjp = rtparams + 1;
for (jp = j->jp, rtjp = rtparams + 1; rtjp < rtparams + nrt;
jp++) {
if (JP_RDTUN(jp) && strcmp(jp->jp_name, "jid")) {
if (!((jp->jp_flags & (JP_BOOL | JP_NOBOOL)) &&
jp->jp_valuelen == 0 &&
*(int *)jp->jp_value) &&
!(rtjp->jp_valuelen == jp->jp_valuelen &&
!memcmp(rtjp->jp_value, jp->jp_value,
jp->jp_valuelen))) {
if (dofail) {
jail_warnx(j, "%s cannot be "
"changed after creation",
jp->jp_name);
failed(j);
rval = -1;
} else
rval = 1;
break;
}
rtjp++;
}
}
}
for (rtjp = rtparams + 1; rtjp < rtparams + nrt; rtjp++)
rtjp->jp_name = NULL;
jailparam_free(rtparams, nrt);
return rval;
}
/*
* Get the jail's jid if it is running.
*/
static void
running_jid(struct cfjail *j, int dflag)
{
struct iovec jiov[2];
const char *pval;
char *ep;
int jid;
if ((pval = string_param(j->intparams[KP_JID]))) {
if (!(jid = strtol(pval, &ep, 10)) || *ep) {
j->jid = -1;
return;
}
*(const void **)&jiov[0].iov_base = "jid";
jiov[0].iov_len = sizeof("jid");
jiov[1].iov_base = &jid;
jiov[1].iov_len = sizeof(jid);
} else if ((pval = string_param(j->intparams[KP_NAME]))) {
*(const void **)&jiov[0].iov_base = "name";
jiov[0].iov_len = sizeof("name");
jiov[1].iov_len = strlen(pval) + 1;
jiov[1].iov_base = alloca(jiov[1].iov_len);
strcpy(jiov[1].iov_base, pval);
} else {
j->jid = -1;
return;
}
j->jid = jail_get(jiov, 2, dflag ? JAIL_DYING : 0);
}
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
/*
* Set jail parameters and possible print them out.
*/
static int
jailparam_set_note(const struct cfjail *j, struct jailparam *jp, unsigned njp,
int flags)
{
char *value;
int jid;
unsigned i;
jid = jailparam_set(jp, njp, flags);
if (verbose > 0) {
jail_note(j, "jail_set(%s%s)",
(flags & (JAIL_CREATE | JAIL_UPDATE)) == JAIL_CREATE
? "JAIL_CREATE" : "JAIL_UPDATE",
(flags & JAIL_DYING) ? " | JAIL_DYING" : "");
for (i = 0; i < njp; i++) {
printf(" %s", jp[i].jp_name);
if (jp[i].jp_value == NULL)
continue;
putchar('=');
value = jailparam_export(jp + i);
if (value == NULL)
err(1, "jailparam_export");
quoted_print(stdout, value);
free(value);
}
if (jid < 0)
printf(": %s", strerror(errno));
printf("\n");
}
return jid;
}
/*
* Print a jail record.
*/
static void
print_jail(FILE *fp, struct cfjail *j, int oldcl)
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
{
struct cfparam *p;
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
if (oldcl) {
fprintf(fp, "%d\t", j->jid);
print_param(fp, j->intparams[KP_PATH], ',', 0);
putc('\t', fp);
print_param(fp, j->intparams[KP_HOST_HOSTNAME], ',', 0);
putc('\t', fp);
#ifdef INET
print_param(fp, j->intparams[KP_IP4_ADDR], ',', 0);
#ifdef INET6
if (j->intparams[KP_IP4_ADDR] &&
!TAILQ_EMPTY(&j->intparams[KP_IP4_ADDR]->val) &&
j->intparams[KP_IP6_ADDR] &&
!TAILQ_EMPTY(&j->intparams[KP_IP6_ADDR]->val))
putc(',', fp);
#endif
#endif
#ifdef INET6
print_param(fp, j->intparams[KP_IP6_ADDR], ',', 0);
#endif
putc('\t', fp);
print_param(fp, j->intparams[IP_COMMAND], ' ', 0);
} else {
fprintf(fp, "jid=%d", j->jid);
TAILQ_FOREACH(p, &j->params, tq)
if (strcmp(p->name, "jid")) {
putc(' ', fp);
print_param(fp, p, ',', 1);
}
}
putc('\n', fp);
}
/*
* Print a parameter value, or a name=value pair.
*/
static void
print_param(FILE *fp, const struct cfparam *p, int sep, int doname)
{
const struct cfstring *s, *ts;
if (doname)
fputs(p->name, fp);
if (p == NULL || TAILQ_EMPTY(&p->val))
return;
if (doname)
putc('=', fp);
TAILQ_FOREACH_SAFE(s, &p->val, tq, ts) {
quoted_print(fp, s->s);
if (ts != NULL)
putc(sep, fp);
}
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
}
/*
* Print a string with quotes around spaces.
*/
static void
quoted_print(FILE *fp, char *str)
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
{
int c, qc;
char *p = str;
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
qc = !*p ? '"'
: strchr(p, '\'') ? '"'
: strchr(p, '"') ? '\''
: strchr(p, ' ') || strchr(p, '\t') ? '"'
: 0;
if (qc)
putc(qc, fp);
while ((c = *p++)) {
if (c == '\\' || c == qc)
putc('\\', fp);
putc(c, fp);
}
if (qc)
putc(qc, fp);
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
}
static void
usage(void)
{
(void)fprintf(stderr,
"usage: jail [-dhilqv] [-J jid_file] [-u username] [-U username]\n"
" -[cmr] param=value ... [command=command ...]\n"
" jail [-dqv] [-f file] -[cmr] [jail]\n"
" jail [-qv] [-f file] -[rR] ['*' | jail ...]\n"
" jail [-dhilqv] [-J jid_file] [-u username] [-U username]\n"
" [-n jailname] [-s securelevel]\n"
" path hostname [ip[,...]] command ...\n");
exit(1);
}