d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
7ef5e8bc80
freebsd-dev/sys/cam/scsi/scsi_targ_bh.c

766 lines
20 KiB
C
Raw Normal View History

Start each of the license/copyright comments with /*-
2005-01-05 22:34:37 +00:00
/*-
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
* Implementation of the Target Mode 'Black Hole device' for CAM.
*
* Copyright (c) 1999 Justin T. Gibbs.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
Use __FBSDID().
2003-06-10 18:14:05 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
#include <sys/param.h>
#include <sys/queue.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/types.h>
Separate the struct bio related stuff out of <sys/buf.h> into <sys/bio.h>. <sys/bio.h> is now a prerequisite for <sys/buf.h> but it shall not be made a nested include according to bdes teachings on the subject of nested includes. Diskdrivers and similar stuff below specfs::strategy() should no longer need to include <sys/buf.> unless they need caching of data. Still a few bogus uses of struct buf to track down. Repocopy by: peter
2000-05-05 09:59:14 +00:00
#include <sys/bio.h>
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
#include <sys/conf.h>
#include <sys/devicestat.h>
#include <sys/malloc.h>
#include <sys/uio.h>
#include <cam/cam.h>
#include <cam/cam_ccb.h>
#include <cam/cam_periph.h>
#include <cam/cam_queue.h>
#include <cam/cam_xpt_periph.h>
#include <cam/cam_debug.h>
Remove Giant from CAM. Drivers (SIMs) now register a mutex that CAM will use to synchornize and protect all data objects that are used for that SIM. Drivers that are not yet MPSAFE register Giant and operate as usual. RIght now, no drivers are MPSAFE, though a few will be changed in the coming week as this work settles down. The driver API has changed, so all CAM drivers will need to be recompiled. The userland API has not changed, so tools like camcontrol do not need to be recompiled.
2007-04-15 08:49:19 +00:00
#include <cam/cam_sim.h>
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
#include <cam/scsi/scsi_all.h>
#include <cam/scsi/scsi_message.h>
Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs. This means that their use is restricted to a single C file.
2011-11-07 06:44:47 +00:00
static MALLOC_DEFINE(M_SCSIBH, "SCSI bh", "SCSI blackhole buffers");
- Providing fine-grained malloc statistic by replacing M_DEVBUF with module-specific malloc types. These should help us to pinpoint the possible memory leakage in the future. - Implementing xpt_alloc_ccb_nowait() and replacing all malloc/free based CCB memory management with xpt_alloc_ccb[_nowait]/xpt_free_ccb. Hopefully this would be helpful if someday we move the CCB allocator to use UMA instead of malloc(). Encouraged by: jeffr, rwatson Reviewed by: gibbs, scottl Approved by: re (scottl)
2005-07-01 15:21:30 +00:00
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
typedef enum {
TARGBH_STATE_NORMAL,
TARGBH_STATE_EXCEPTION,
TARGBH_STATE_TEARDOWN
} targbh_state;
typedef enum {
TARGBH_FLAG_NONE = 0x00,
TARGBH_FLAG_LUN_ENABLED = 0x01
} targbh_flags;
typedef enum {
Merge CAM locking changes from the projects/camlock branch to radically reduce lock congestion and improve SMP scalability of the SCSI/ATA stack, preparing the ground for the coming next GEOM direct dispatch support. Replace big per-SIM locks with bunch of smaller ones: - per-LUN locks to protect device and peripheral drivers state; - per-target locks to protect list of LUNs on target; - per-bus locks to protect reference counting; - per-send queue locks to protect queue of CCBs to be sent; - per-done queue locks to protect queue of completed CCBs; - remaining per-SIM locks now protect only HBA driver internals. While holding LUN lock it is allowed (while not recommended for performance reasons) to take SIM lock. The opposite acquisition order is forbidden. All the other locks are leaf locks, that can be taken anywhere, but should not be cascaded. Many functions, such as: xpt_action(), xpt_done(), xpt_async(), xpt_create_path(), etc. are no longer require (but allow) SIM lock to be held. To keep compatibility and solve cases where SIM lock can't be dropped, all xpt_async() calls in addition to xpt_done() calls are queued to completion threads for async processing in clean environment without SIM lock held. Instead of single CAM SWI thread, used for commands completion processing before, use multiple (depending on number of CPUs) threads. Load balanced between them using "hash" of the device B:T:L address. HBA drivers that can drop SIM lock during completion processing and have sufficient number of completion threads to efficiently scale to multiple CPUs can use new function xpt_done_direct() to avoid extra context switch. Make ahci(4) driver to use this mechanism depending on hardware setup. Sponsored by: iXsystems, Inc. MFC after: 2 months
2013-10-21 12:00:26 +00:00
TARGBH_CCB_WORKQ
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
} targbh_ccb_types;
Silence errors. Reduce the number of accept target I/O entries we allow to better exercise the resource shortage handling code in controller drivers.
1999-03-05 23:21:28 +00:00
#define MAX_ACCEPT 8
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
#define MAX_IMMEDIATE 16
#define MAX_BUF_SIZE 256 /* Max inquiry/sense/mode page transfer */
/* Offsets into our private CCB area for storing accept information */
#define ccb_type ppriv_field0
#define ccb_descr ppriv_ptr1
/* We stick a pointer to the originating accept TIO in each continue I/O CCB */
#define ccb_atio ppriv_ptr1
Back out the previous change to the queue(3) interface. It was not discussed and should probably not happen. Requested by: msmith and others
2000-05-26 02:09:24 +00:00
TAILQ_HEAD(ccb_queue, ccb_hdr);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
struct targbh_softc {
struct ccb_queue pending_queue;
struct ccb_queue work_queue;
struct ccb_queue unknown_atio_queue;
struct devstat device_stats;
targbh_state state;
targbh_flags flags;
u_int init_level;
u_int inq_data_len;
struct ccb_accept_tio *accept_tio_list;
struct ccb_hdr_slist immed_notify_slist;
};
struct targbh_cmd_desc {
struct ccb_accept_tio* atio_link;
u_int data_resid; /* How much left to transfer */
u_int data_increment;/* Amount to send before next disconnect */
void* data; /* The data. Can be from backing_store or not */
void* backing_store;/* Backing store allocated for this descriptor*/
u_int max_size; /* Size of backing_store */
u_int32_t timeout;
u_int8_t status; /* Status to return to initiator */
};
static struct scsi_inquiry_data no_lun_inq_data =
{
T_NODEVICE | (SID_QUAL_BAD_LU << 5), 0,
/* version */2, /* format version */2
};
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
static struct scsi_sense_data_fixed no_lun_sense_data =
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
{
SSD_CURRENT_ERROR|SSD_ERRCODE_VALID,
0,
SSD_KEY_NOT_READY,
Silence errors. Reduce the number of accept target I/O entries we allow to better exercise the resource shortage handling code in controller drivers.
1999-03-05 23:21:28 +00:00
{ 0, 0, 0, 0 },
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
/*extra_len*/offsetof(struct scsi_sense_data_fixed, fru)
- offsetof(struct scsi_sense_data_fixed, extra_len),
Silence errors. Reduce the number of accept target I/O entries we allow to better exercise the resource shortage handling code in controller drivers.
1999-03-05 23:21:28 +00:00
{ 0, 0, 0, 0 },
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
/* Logical Unit Not Supported */
/*ASC*/0x25, /*ASCQ*/0
};
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
static const int request_sense_size = offsetof(struct scsi_sense_data_fixed, fru);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
static periph_init_t targbhinit;
static void targbhasync(void *callback_arg, u_int32_t code,
struct cam_path *path, void *arg);
static cam_status targbhenlun(struct cam_periph *periph);
static cam_status targbhdislun(struct cam_periph *periph);
static periph_ctor_t targbhctor;
static periph_dtor_t targbhdtor;
static periph_start_t targbhstart;
static void targbhdone(struct cam_periph *periph,
union ccb *done_ccb);
Silence errors. Reduce the number of accept target I/O entries we allow to better exercise the resource shortage handling code in controller drivers.
1999-03-05 23:21:28 +00:00
#ifdef NOTYET
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
static int targbherror(union ccb *ccb, u_int32_t cam_flags,
u_int32_t sense_flags);
Silence errors. Reduce the number of accept target I/O entries we allow to better exercise the resource shortage handling code in controller drivers.
1999-03-05 23:21:28 +00:00
#endif
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
static struct targbh_cmd_desc* targbhallocdescr(void);
static void targbhfreedescr(struct targbh_cmd_desc *buf);
static struct periph_driver targbhdriver =
{
targbhinit, "targbh",
TAILQ_HEAD_INITIALIZER(targbhdriver.units), /* generation */ 0
};
Change the peripheral driver list from a linker set to module driven driver registration. This should allow things like da, sa, cd etc to be in seperate KLD's to the cam core and make them preloadable.
2001-02-07 07:05:59 +00:00
PERIPHDRIVER_DECLARE(targbh, targbhdriver);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
static void
targbhinit(void)
{
cam_status status;
/*
* Install a global async callback. This callback will
* receive async callbacks like "new path registered".
*/
Add a helper function for registering async callbacks. Besides eliminating a lot of duplicated code, this also fixes a locking edge case.
2007-05-16 16:54:23 +00:00
status = xpt_register_async(AC_PATH_REGISTERED | AC_PATH_DEREGISTERED,
targbhasync, NULL, NULL);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
if (status != CAM_REQ_CMP) {
printf("targbh: Failed to attach master async callback "
"due to status 0x%x!\n", status);
}
}
static void
targbhasync(void *callback_arg, u_int32_t code,
struct cam_path *path, void *arg)
{
Detach black hole device on AC_PATH_DEREGISTERED.
2003-09-25 05:02:19 +00:00
struct cam_path *new_path;
- Pick up a correct path_id for the bus on AC_PATH_REGISTERED. - Call cam_periph_invalidate() only if the periph is found.
2003-09-30 08:03:52 +00:00
struct ccb_pathinq *cpi;
path_id_t bus_path_id;
Detach black hole device on AC_PATH_DEREGISTERED.
2003-09-25 05:02:19 +00:00
cam_status status;
- Pick up a correct path_id for the bus on AC_PATH_REGISTERED. - Call cam_periph_invalidate() only if the periph is found.
2003-09-30 08:03:52 +00:00
cpi = (struct ccb_pathinq *)arg;
if (code == AC_PATH_REGISTERED)
bus_path_id = cpi->ccb_h.path_id;
else
bus_path_id = xpt_path_path_id(path);
Detach black hole device on AC_PATH_DEREGISTERED.
2003-09-25 05:02:19 +00:00
/*
* Allocate a peripheral instance for
* this target instance.
*/
status = xpt_create_path(&new_path, NULL,
- Pick up a correct path_id for the bus on AC_PATH_REGISTERED. - Call cam_periph_invalidate() only if the periph is found.
2003-09-30 08:03:52 +00:00
bus_path_id,
Detach black hole device on AC_PATH_DEREGISTERED.
2003-09-25 05:02:19 +00:00
CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
if (status != CAM_REQ_CMP) {
printf("targbhasync: Unable to create path "
"due to status 0x%x\n", status);
return;
}
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
switch (code) {
case AC_PATH_REGISTERED:
{
/* Only attach to controllers that support target mode */
if ((cpi->target_sprt & PIT_PROCESSOR) == 0)
break;
status = cam_periph_alloc(targbhctor, NULL, targbhdtor,
targbhstart,
"targbh", CAM_PERIPH_BIO,
new_path, targbhasync,
AC_PATH_REGISTERED,
cpi);
break;
}
case AC_PATH_DEREGISTERED:
{
- Pick up a correct path_id for the bus on AC_PATH_REGISTERED. - Call cam_periph_invalidate() only if the periph is found.
2003-09-30 08:03:52 +00:00
struct cam_periph *periph;
if ((periph = cam_periph_find(new_path, "targbh")) != NULL)
cam_periph_invalidate(periph);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
break;
}
default:
break;
}
Detach black hole device on AC_PATH_DEREGISTERED.
2003-09-25 05:02:19 +00:00
xpt_free_path(new_path);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
}
/* Attempt to enable our lun */
static cam_status
targbhenlun(struct cam_periph *periph)
{
union ccb immed_ccb;
struct targbh_softc *softc;
cam_status status;
int i;
softc = (struct targbh_softc *)periph->softc;
if ((softc->flags & TARGBH_FLAG_LUN_ENABLED) != 0)
return (CAM_REQ_CMP);
Replace most of priority numbers with defines. No logical changes.
2009-10-23 08:27:55 +00:00
xpt_setup_ccb(&immed_ccb.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
immed_ccb.ccb_h.func_code = XPT_EN_LUN;
/* Don't need support for any vendor specific commands */
immed_ccb.cel.grp6_len = 0;
immed_ccb.cel.grp7_len = 0;
immed_ccb.cel.enable = 1;
xpt_action(&immed_ccb);
status = immed_ccb.ccb_h.status;
if (status != CAM_REQ_CMP) {
Add an xpt_print function to reduce most of the xpt_print_path/printf pairs. Convert the core code to use it. Reviewed by: scsi (various folks weighing in with good advice) MFC after: 2 weeks
2006-12-05 07:45:28 +00:00
xpt_print(periph->path,
"targbhenlun - Enable Lun Rejected with status 0x%x\n",
status);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
return (status);
}
softc->flags |= TARGBH_FLAG_LUN_ENABLED;
/*
* Build up a buffer of accept target I/O
* operations for incoming selections.
*/
for (i = 0; i < MAX_ACCEPT; i++) {
struct ccb_accept_tio *atio;
- Providing fine-grained malloc statistic by replacing M_DEVBUF with module-specific malloc types. These should help us to pinpoint the possible memory leakage in the future. - Implementing xpt_alloc_ccb_nowait() and replacing all malloc/free based CCB memory management with xpt_alloc_ccb[_nowait]/xpt_free_ccb. Hopefully this would be helpful if someday we move the CCB allocator to use UMA instead of malloc(). Encouraged by: jeffr, rwatson Reviewed by: gibbs, scottl Approved by: re (scottl)
2005-07-01 15:21:30 +00:00
atio = (struct ccb_accept_tio*)malloc(sizeof(*atio), M_SCSIBH,
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
M_NOWAIT);
if (atio == NULL) {
status = CAM_RESRC_UNAVAIL;
break;
}
atio->ccb_h.ccb_descr = targbhallocdescr();
if (atio->ccb_h.ccb_descr == NULL) {
- Providing fine-grained malloc statistic by replacing M_DEVBUF with module-specific malloc types. These should help us to pinpoint the possible memory leakage in the future. - Implementing xpt_alloc_ccb_nowait() and replacing all malloc/free based CCB memory management with xpt_alloc_ccb[_nowait]/xpt_free_ccb. Hopefully this would be helpful if someday we move the CCB allocator to use UMA instead of malloc(). Encouraged by: jeffr, rwatson Reviewed by: gibbs, scottl Approved by: re (scottl)
2005-07-01 15:21:30 +00:00
free(atio, M_SCSIBH);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
status = CAM_RESRC_UNAVAIL;
break;
}
Replace most of priority numbers with defines. No logical changes.
2009-10-23 08:27:55 +00:00
xpt_setup_ccb(&atio->ccb_h, periph->path, CAM_PRIORITY_NORMAL);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
atio->ccb_h.func_code = XPT_ACCEPT_TARGET_IO;
atio->ccb_h.cbfcnp = targbhdone;
((struct targbh_cmd_desc*)atio->ccb_h.ccb_descr)->atio_link =
softc->accept_tio_list;
softc->accept_tio_list = atio;
Fix targbh crash on XPT_IMMED_NOTIFY error during attach.
2013-09-01 11:50:37 +00:00
xpt_action((union ccb *)atio);
status = atio->ccb_h.status;
if (status != CAM_REQ_INPROG)
break;
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
}
if (i == 0) {
Add an xpt_print function to reduce most of the xpt_print_path/printf pairs. Convert the core code to use it. Reviewed by: scsi (various folks weighing in with good advice) MFC after: 2 weeks
2006-12-05 07:45:28 +00:00
xpt_print(periph->path,
"targbhenlun - Could not allocate accept tio CCBs: status "
"= 0x%x\n", status);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
targbhdislun(periph);
return (CAM_REQ_CMP_ERR);
}
/*
* Build up a buffer of immediate notify CCBs
* so the SIM can tell us of asynchronous target mode events.
*/
for (i = 0; i < MAX_ACCEPT; i++) {
Bring legacy CAM target implementation back into API/KPI-coherent and even functional state. While CTL is much more superior target from all points, there is no reason why this code should not work. Tested with ahc(4) as target side HBA. MFC after: 2 weeks
2013-09-01 13:01:59 +00:00
struct ccb_immediate_notify *inot;
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
Bring legacy CAM target implementation back into API/KPI-coherent and even functional state. While CTL is much more superior target from all points, there is no reason why this code should not work. Tested with ahc(4) as target side HBA. MFC after: 2 weeks
2013-09-01 13:01:59 +00:00
inot = (struct ccb_immediate_notify*)malloc(sizeof(*inot),
M_SCSIBH, M_NOWAIT);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
if (inot == NULL) {
status = CAM_RESRC_UNAVAIL;
break;
}
Replace most of priority numbers with defines. No logical changes.
2009-10-23 08:27:55 +00:00
xpt_setup_ccb(&inot->ccb_h, periph->path, CAM_PRIORITY_NORMAL);
Bring legacy CAM target implementation back into API/KPI-coherent and even functional state. While CTL is much more superior target from all points, there is no reason why this code should not work. Tested with ahc(4) as target side HBA. MFC after: 2 weeks
2013-09-01 13:01:59 +00:00
inot->ccb_h.func_code = XPT_IMMEDIATE_NOTIFY;
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
inot->ccb_h.cbfcnp = targbhdone;
Fix targbh crash on XPT_IMMED_NOTIFY error during attach.
2013-09-01 11:50:37 +00:00
SLIST_INSERT_HEAD(&softc->immed_notify_slist, &inot->ccb_h,
periph_links.sle);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
xpt_action((union ccb *)inot);
status = inot->ccb_h.status;
Fix targbh crash on XPT_IMMED_NOTIFY error during attach.
2013-09-01 11:50:37 +00:00
if (status != CAM_REQ_INPROG)
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
break;
}
if (i == 0) {
Add an xpt_print function to reduce most of the xpt_print_path/printf pairs. Convert the core code to use it. Reviewed by: scsi (various folks weighing in with good advice) MFC after: 2 weeks
2006-12-05 07:45:28 +00:00
xpt_print(periph->path,
"targbhenlun - Could not allocate immediate notify "
"CCBs: status = 0x%x\n", status);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
targbhdislun(periph);
return (CAM_REQ_CMP_ERR);
}
return (CAM_REQ_CMP);
}
static cam_status
targbhdislun(struct cam_periph *periph)
{
union ccb ccb;
struct targbh_softc *softc;
struct ccb_accept_tio* atio;
struct ccb_hdr *ccb_h;
softc = (struct targbh_softc *)periph->softc;
if ((softc->flags & TARGBH_FLAG_LUN_ENABLED) == 0)
return CAM_REQ_CMP;
/* XXX Block for Continue I/O completion */
/* Kill off all ACCECPT and IMMEDIATE CCBs */
while ((atio = softc->accept_tio_list) != NULL) {
softc->accept_tio_list =
((struct targbh_cmd_desc*)atio->ccb_h.ccb_descr)->atio_link;
Replace most of priority numbers with defines. No logical changes.
2009-10-23 08:27:55 +00:00
xpt_setup_ccb(&ccb.cab.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
ccb.cab.ccb_h.func_code = XPT_ABORT;
ccb.cab.abort_ccb = (union ccb *)atio;
xpt_action(&ccb);
}
while ((ccb_h = SLIST_FIRST(&softc->immed_notify_slist)) != NULL) {
SLIST_REMOVE_HEAD(&softc->immed_notify_slist, periph_links.sle);
Replace most of priority numbers with defines. No logical changes.
2009-10-23 08:27:55 +00:00
xpt_setup_ccb(&ccb.cab.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
ccb.cab.ccb_h.func_code = XPT_ABORT;
ccb.cab.abort_ccb = (union ccb *)ccb_h;
xpt_action(&ccb);
}
/*
* Dissable this lun.
*/
Replace most of priority numbers with defines. No logical changes.
2009-10-23 08:27:55 +00:00
xpt_setup_ccb(&ccb.cel.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
ccb.cel.ccb_h.func_code = XPT_EN_LUN;
ccb.cel.enable = 0;
xpt_action(&ccb);
if (ccb.cel.ccb_h.status != CAM_REQ_CMP)
printf("targbhdislun - Disabling lun on controller failed "
"with status 0x%x\n", ccb.cel.ccb_h.status);
else
softc->flags &= ~TARGBH_FLAG_LUN_ENABLED;
return (ccb.cel.ccb_h.status);
}
static cam_status
targbhctor(struct cam_periph *periph, void *arg)
{
struct targbh_softc *softc;
/* Allocate our per-instance private storage */
softc = (struct targbh_softc *)malloc(sizeof(*softc),
- Providing fine-grained malloc statistic by replacing M_DEVBUF with module-specific malloc types. These should help us to pinpoint the possible memory leakage in the future. - Implementing xpt_alloc_ccb_nowait() and replacing all malloc/free based CCB memory management with xpt_alloc_ccb[_nowait]/xpt_free_ccb. Hopefully this would be helpful if someday we move the CCB allocator to use UMA instead of malloc(). Encouraged by: jeffr, rwatson Reviewed by: gibbs, scottl Approved by: re (scottl)
2005-07-01 15:21:30 +00:00
M_SCSIBH, M_NOWAIT);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
if (softc == NULL) {
printf("targctor: unable to malloc softc\n");
return (CAM_REQ_CMP_ERR);
}
Properly initialize softc. Do some minor SCSI_CDB6_LEN changes. Obtained from:gibbs@freebsd.org
2000-07-14 19:41:43 +00:00
bzero(softc, sizeof(*softc));
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
TAILQ_INIT(&softc->pending_queue);
TAILQ_INIT(&softc->work_queue);
softc->accept_tio_list = NULL;
SLIST_INIT(&softc->immed_notify_slist);
softc->state = TARGBH_STATE_NORMAL;
periph->softc = softc;
softc->init_level++;
Fix targbh crash on XPT_IMMED_NOTIFY error during attach.
2013-09-01 11:50:37 +00:00
if (targbhenlun(periph) != CAM_REQ_CMP)
cam_periph_invalidate(periph);
return (CAM_REQ_CMP);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
}
static void
targbhdtor(struct cam_periph *periph)
{
struct targbh_softc *softc;
softc = (struct targbh_softc *)periph->softc;
softc->state = TARGBH_STATE_TEARDOWN;
targbhdislun(periph);
switch (softc->init_level) {
Add /* FALLTHROUGH */ Remove unused variable(s). Order switch in canonical order. Found by: FlexeLint
2003-05-31 20:44:32 +00:00
case 0:
Remove extraneous semicolons, no functional changes. Submitted by: Marc Balmer <marc@msys.ch> MFC after: 1 week
2010-01-07 21:01:37 +00:00
panic("targdtor - impossible init level");
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
case 1:
Add /* FALLTHROUGH */ Remove unused variable(s). Order switch in canonical order. Found by: FlexeLint
2003-05-31 20:44:32 +00:00
/* FALLTHROUGH */
default:
Detach black hole device on AC_PATH_DEREGISTERED.
2003-09-25 05:02:19 +00:00
/* XXX Wait for callback of targbhdislun() */
Merge CAM locking changes from the projects/camlock branch to radically reduce lock congestion and improve SMP scalability of the SCSI/ATA stack, preparing the ground for the coming next GEOM direct dispatch support. Replace big per-SIM locks with bunch of smaller ones: - per-LUN locks to protect device and peripheral drivers state; - per-target locks to protect list of LUNs on target; - per-bus locks to protect reference counting; - per-send queue locks to protect queue of CCBs to be sent; - per-done queue locks to protect queue of completed CCBs; - remaining per-SIM locks now protect only HBA driver internals. While holding LUN lock it is allowed (while not recommended for performance reasons) to take SIM lock. The opposite acquisition order is forbidden. All the other locks are leaf locks, that can be taken anywhere, but should not be cascaded. Many functions, such as: xpt_action(), xpt_done(), xpt_async(), xpt_create_path(), etc. are no longer require (but allow) SIM lock to be held. To keep compatibility and solve cases where SIM lock can't be dropped, all xpt_async() calls in addition to xpt_done() calls are queued to completion threads for async processing in clean environment without SIM lock held. Instead of single CAM SWI thread, used for commands completion processing before, use multiple (depending on number of CPUs) threads. Load balanced between them using "hash" of the device B:T:L address. HBA drivers that can drop SIM lock during completion processing and have sufficient number of completion threads to efficiently scale to multiple CPUs can use new function xpt_done_direct() to avoid extra context switch. Make ahci(4) driver to use this mechanism depending on hardware setup. Sponsored by: iXsystems, Inc. MFC after: 2 months
2013-10-21 12:00:26 +00:00
cam_periph_sleep(periph, softc, PRIBIO, "targbh", hz/2);
- Providing fine-grained malloc statistic by replacing M_DEVBUF with module-specific malloc types. These should help us to pinpoint the possible memory leakage in the future. - Implementing xpt_alloc_ccb_nowait() and replacing all malloc/free based CCB memory management with xpt_alloc_ccb[_nowait]/xpt_free_ccb. Hopefully this would be helpful if someday we move the CCB allocator to use UMA instead of malloc(). Encouraged by: jeffr, rwatson Reviewed by: gibbs, scottl Approved by: re (scottl)
2005-07-01 15:21:30 +00:00
free(softc, M_SCSIBH);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
break;
}
}
static void
targbhstart(struct cam_periph *periph, union ccb *start_ccb)
{
struct targbh_softc *softc;
struct ccb_hdr *ccbh;
struct ccb_accept_tio *atio;
struct targbh_cmd_desc *desc;
struct ccb_scsiio *csio;
ccb_flags flags;
softc = (struct targbh_softc *)periph->softc;
ccbh = TAILQ_FIRST(&softc->work_queue);
Merge CAM locking changes from the projects/camlock branch to radically reduce lock congestion and improve SMP scalability of the SCSI/ATA stack, preparing the ground for the coming next GEOM direct dispatch support. Replace big per-SIM locks with bunch of smaller ones: - per-LUN locks to protect device and peripheral drivers state; - per-target locks to protect list of LUNs on target; - per-bus locks to protect reference counting; - per-send queue locks to protect queue of CCBs to be sent; - per-done queue locks to protect queue of completed CCBs; - remaining per-SIM locks now protect only HBA driver internals. While holding LUN lock it is allowed (while not recommended for performance reasons) to take SIM lock. The opposite acquisition order is forbidden. All the other locks are leaf locks, that can be taken anywhere, but should not be cascaded. Many functions, such as: xpt_action(), xpt_done(), xpt_async(), xpt_create_path(), etc. are no longer require (but allow) SIM lock to be held. To keep compatibility and solve cases where SIM lock can't be dropped, all xpt_async() calls in addition to xpt_done() calls are queued to completion threads for async processing in clean environment without SIM lock held. Instead of single CAM SWI thread, used for commands completion processing before, use multiple (depending on number of CPUs) threads. Load balanced between them using "hash" of the device B:T:L address. HBA drivers that can drop SIM lock during completion processing and have sufficient number of completion threads to efficiently scale to multiple CPUs can use new function xpt_done_direct() to avoid extra context switch. Make ahci(4) driver to use this mechanism depending on hardware setup. Sponsored by: iXsystems, Inc. MFC after: 2 months
2013-10-21 12:00:26 +00:00
if (ccbh == NULL) {
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
xpt_release_ccb(start_ccb);
} else {
TAILQ_REMOVE(&softc->work_queue, ccbh, periph_links.tqe);
TAILQ_INSERT_HEAD(&softc->pending_queue, ccbh,
periph_links.tqe);
atio = (struct ccb_accept_tio*)ccbh;
desc = (struct targbh_cmd_desc *)atio->ccb_h.ccb_descr;
/* Is this a tagged request? */
Propagate CAM_DIS_DISCONNECT on through: 1. If we get frozen, unfreeze for disable disconnects. 2. Put CAM_DIS_DISCONNECT commands at the head of the work queue (we have a target still connected and we can't run anything else until this command completes). If we had an error sending the last CTIO, unfreeze the queue anyway.
2001-07-30 00:19:50 +00:00
flags = atio->ccb_h.flags &
(CAM_DIS_DISCONNECT|CAM_TAG_ACTION_VALID|CAM_DIR_MASK);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
Propagate sense data through from SIM (if there) and mark the CTIO that there's sense to send with status (if the SIM does it). Reviewed by: gibbs@freebsd.org
2000-01-25 17:39:09 +00:00
csio = &start_ccb->csio;
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
/*
* If we are done with the transaction, tell the
* controller to send status and perform a CMD_CMPLT.
Propagate sense data through from SIM (if there) and mark the CTIO that there's sense to send with status (if the SIM does it). Reviewed by: gibbs@freebsd.org
2000-01-25 17:39:09 +00:00
* If we have associated sense data, see if we can
* send that too.
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
*/
Propagate sense data through from SIM (if there) and mark the CTIO that there's sense to send with status (if the SIM does it). Reviewed by: gibbs@freebsd.org
2000-01-25 17:39:09 +00:00
if (desc->data_resid == desc->data_increment) {
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
flags |= CAM_SEND_STATUS;
Propagate sense data through from SIM (if there) and mark the CTIO that there's sense to send with status (if the SIM does it). Reviewed by: gibbs@freebsd.org
2000-01-25 17:39:09 +00:00
if (atio->sense_len) {
csio->sense_len = atio->sense_len;
csio->sense_data = atio->sense_data;
flags |= CAM_SEND_SENSE;
}
}
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
cam_fill_ctio(csio,
/*retries*/2,
targbhdone,
flags,
Don't, when doing cam_fill_ctio, add a SIMPLE Q tag unless TAG_ACTION_VALID is set.
2000-07-14 21:09:25 +00:00
(flags & CAM_TAG_ACTION_VALID)?
MSG_SIMPLE_Q_TAG : 0,
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
atio->tag_id,
atio->init_id,
desc->status,
/*data_ptr*/desc->data_increment == 0
? NULL : desc->data,
/*dxfer_len*/desc->data_increment,
/*timeout*/desc->timeout);
/* Override our wildcard attachment */
start_ccb->ccb_h.target_id = atio->ccb_h.target_id;
start_ccb->ccb_h.target_lun = atio->ccb_h.target_lun;
start_ccb->ccb_h.ccb_type = TARGBH_CCB_WORKQ;
start_ccb->ccb_h.ccb_atio = atio;
CAM_DEBUG(periph->path, CAM_DEBUG_SUBTRACE,
("Sending a CTIO\n"));
xpt_action(start_ccb);
Propagate CAM_DIS_DISCONNECT on through: 1. If we get frozen, unfreeze for disable disconnects. 2. Put CAM_DIS_DISCONNECT commands at the head of the work queue (we have a target still connected and we can't run anything else until this command completes). If we had an error sending the last CTIO, unfreeze the queue anyway.
2001-07-30 00:19:50 +00:00
/*
* If the queue was frozen waiting for the response
* to this ATIO (for instance disconnection was disallowed),
* then release it now that our response has been queued.
*/
if ((atio->ccb_h.status & CAM_DEV_QFRZN) != 0) {
cam_release_devq(periph->path,
/*relsim_flags*/0,
/*reduction*/0,
/*timeout*/0,
/*getcount_only*/0);
atio->ccb_h.status &= ~CAM_DEV_QFRZN;
}
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
ccbh = TAILQ_FIRST(&softc->work_queue);
}
if (ccbh != NULL)
Replace most of priority numbers with defines. No logical changes.
2009-10-23 08:27:55 +00:00
xpt_schedule(periph, CAM_PRIORITY_NORMAL);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
}
static void
targbhdone(struct cam_periph *periph, union ccb *done_ccb)
{
struct targbh_softc *softc;
softc = (struct targbh_softc *)periph->softc;
switch (done_ccb->ccb_h.func_code) {
case XPT_ACCEPT_TARGET_IO:
{
struct ccb_accept_tio *atio;
struct targbh_cmd_desc *descr;
u_int8_t *cdb;
Propagate CAM_DIS_DISCONNECT on through: 1. If we get frozen, unfreeze for disable disconnects. 2. Put CAM_DIS_DISCONNECT commands at the head of the work queue (we have a target still connected and we can't run anything else until this command completes). If we had an error sending the last CTIO, unfreeze the queue anyway.
2001-07-30 00:19:50 +00:00
int priority;
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
atio = &done_ccb->atio;
descr = (struct targbh_cmd_desc*)atio->ccb_h.ccb_descr;
cdb = atio->cdb_io.cdb_bytes;
if (softc->state == TARGBH_STATE_TEARDOWN
|| atio->ccb_h.status == CAM_REQ_ABORTED) {
targbhfreedescr(descr);
- Providing fine-grained malloc statistic by replacing M_DEVBUF with module-specific malloc types. These should help us to pinpoint the possible memory leakage in the future. - Implementing xpt_alloc_ccb_nowait() and replacing all malloc/free based CCB memory management with xpt_alloc_ccb[_nowait]/xpt_free_ccb. Hopefully this would be helpful if someday we move the CCB allocator to use UMA instead of malloc(). Encouraged by: jeffr, rwatson Reviewed by: gibbs, scottl Approved by: re (scottl)
2005-07-01 15:21:30 +00:00
xpt_free_ccb(done_ccb);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
return;
}
/*
* Determine the type of incoming command and
* setup our buffer for a response.
*/
switch (cdb[0]) {
case INQUIRY:
{
struct scsi_inquiry *inq;
inq = (struct scsi_inquiry *)cdb;
CAM_DEBUG(periph->path, CAM_DEBUG_SUBTRACE,
("Saw an inquiry!\n"));
/*
* Validate the command. We don't
* support any VPD pages, so complain
* if EVPD is set.
*/
if ((inq->byte2 & SI_EVPD) != 0
|| inq->page_code != 0) {
atio->ccb_h.flags &= ~CAM_DIR_MASK;
atio->ccb_h.flags |= CAM_DIR_NONE;
Propagate sense data through from SIM (if there) and mark the CTIO that there's sense to send with status (if the SIM does it). Reviewed by: gibbs@freebsd.org
2000-01-25 17:39:09 +00:00
/*
* This needs to have other than a
* no_lun_sense_data response.
*/
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
bcopy(&no_lun_sense_data, &atio->sense_data,
min(sizeof(no_lun_sense_data),
sizeof(atio->sense_data)));
Properly initialize softc. Do some minor SCSI_CDB6_LEN changes. Obtained from:gibbs@freebsd.org
2000-07-14 19:41:43 +00:00
atio->sense_len = sizeof(no_lun_sense_data);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
descr->data_resid = 0;
descr->data_increment = 0;
descr->status = SCSI_STATUS_CHECK_COND;
break;
}
/*
* Direction is always relative
* to the initator.
*/
atio->ccb_h.flags &= ~CAM_DIR_MASK;
atio->ccb_h.flags |= CAM_DIR_IN;
descr->data = &no_lun_inq_data;
descr->data_resid = MIN(sizeof(no_lun_inq_data),
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
scsi_2btoul(inq->length));
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
descr->data_increment = descr->data_resid;
descr->timeout = 5 * 1000;
descr->status = SCSI_STATUS_OK;
break;
}
case REQUEST_SENSE:
{
struct scsi_request_sense *rsense;
rsense = (struct scsi_request_sense *)cdb;
/* Refer to static sense data */
atio->ccb_h.flags &= ~CAM_DIR_MASK;
atio->ccb_h.flags |= CAM_DIR_IN;
descr->data = &no_lun_sense_data;
descr->data_resid = request_sense_size;
descr->data_resid = MIN(descr->data_resid,
Properly initialize softc. Do some minor SCSI_CDB6_LEN changes. Obtained from:gibbs@freebsd.org
2000-07-14 19:41:43 +00:00
SCSI_CDB6_LEN(rsense->length));
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
descr->data_increment = descr->data_resid;
descr->timeout = 5 * 1000;
descr->status = SCSI_STATUS_OK;
break;
}
default:
/* Constant CA, tell initiator */
/* Direction is always relative to the initator */
atio->ccb_h.flags &= ~CAM_DIR_MASK;
atio->ccb_h.flags |= CAM_DIR_NONE;
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
bcopy(&no_lun_sense_data, &atio->sense_data,
min(sizeof(no_lun_sense_data),
sizeof(atio->sense_data)));
Propagate sense data through from SIM (if there) and mark the CTIO that there's sense to send with status (if the SIM does it). Reviewed by: gibbs@freebsd.org
2000-01-25 17:39:09 +00:00
atio->sense_len = sizeof (no_lun_sense_data);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
descr->data_resid = 0;
descr->data_increment = 0;
descr->timeout = 5 * 1000;
descr->status = SCSI_STATUS_CHECK_COND;
break;
}
/* Queue us up to receive a Continue Target I/O ccb. */
Propagate CAM_DIS_DISCONNECT on through: 1. If we get frozen, unfreeze for disable disconnects. 2. Put CAM_DIS_DISCONNECT commands at the head of the work queue (we have a target still connected and we can't run anything else until this command completes). If we had an error sending the last CTIO, unfreeze the queue anyway.
2001-07-30 00:19:50 +00:00
if ((atio->ccb_h.flags & CAM_DIS_DISCONNECT) != 0) {
TAILQ_INSERT_HEAD(&softc->work_queue, &atio->ccb_h,
periph_links.tqe);
priority = 0;
} else {
TAILQ_INSERT_TAIL(&softc->work_queue, &atio->ccb_h,
periph_links.tqe);
Replace most of priority numbers with defines. No logical changes.
2009-10-23 08:27:55 +00:00
priority = CAM_PRIORITY_NORMAL;
Propagate CAM_DIS_DISCONNECT on through: 1. If we get frozen, unfreeze for disable disconnects. 2. Put CAM_DIS_DISCONNECT commands at the head of the work queue (we have a target still connected and we can't run anything else until this command completes). If we had an error sending the last CTIO, unfreeze the queue anyway.
2001-07-30 00:19:50 +00:00
}
xpt_schedule(periph, priority);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
break;
}
case XPT_CONT_TARGET_IO:
{
struct ccb_accept_tio *atio;
struct targbh_cmd_desc *desc;
CAM_DEBUG(periph->path, CAM_DEBUG_SUBTRACE,
("Received completed CTIO\n"));
atio = (struct ccb_accept_tio*)done_ccb->ccb_h.ccb_atio;
desc = (struct targbh_cmd_desc *)atio->ccb_h.ccb_descr;
TAILQ_REMOVE(&softc->pending_queue, &atio->ccb_h,
periph_links.tqe);
Propagate sense data through from SIM (if there) and mark the CTIO that there's sense to send with status (if the SIM does it). Reviewed by: gibbs@freebsd.org
2000-01-25 17:39:09 +00:00
/*
* We could check for CAM_SENT_SENSE bein set here,
* but since we're not maintaining any CA/UA state,
* there's no point.
*/
atio->sense_len = 0;
done_ccb->ccb_h.flags &= ~CAM_SEND_SENSE;
done_ccb->ccb_h.status &= ~CAM_SENT_SENSE;
Propagate CAM_DIS_DISCONNECT on through: 1. If we get frozen, unfreeze for disable disconnects. 2. Put CAM_DIS_DISCONNECT commands at the head of the work queue (we have a target still connected and we can't run anything else until this command completes). If we had an error sending the last CTIO, unfreeze the queue anyway.
2001-07-30 00:19:50 +00:00
/*
* Any errors will not change the data we return,
* so make sure the queue is not left frozen.
* XXX - At some point there may be errors that
* leave us in a connected state with the
* initiator...
*/
if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) {
printf("Releasing Queue\n");
cam_release_devq(done_ccb->ccb_h.path,
/*relsim_flags*/0,
/*reduction*/0,
/*timeout*/0,
/*getcount_only*/0);
done_ccb->ccb_h.status &= ~CAM_DEV_QFRZN;
}
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
desc->data_resid -= desc->data_increment;
xpt_release_ccb(done_ccb);
if (softc->state != TARGBH_STATE_TEARDOWN) {
/*
* Send the original accept TIO back to the
* controller to handle more work.
*/
CAM_DEBUG(periph->path, CAM_DEBUG_SUBTRACE,
("Returning ATIO to target\n"));
/* Restore wildcards */
atio->ccb_h.target_id = CAM_TARGET_WILDCARD;
atio->ccb_h.target_lun = CAM_LUN_WILDCARD;
xpt_action((union ccb *)atio);
break;
} else {
targbhfreedescr(desc);
- Providing fine-grained malloc statistic by replacing M_DEVBUF with module-specific malloc types. These should help us to pinpoint the possible memory leakage in the future. - Implementing xpt_alloc_ccb_nowait() and replacing all malloc/free based CCB memory management with xpt_alloc_ccb[_nowait]/xpt_free_ccb. Hopefully this would be helpful if someday we move the CCB allocator to use UMA instead of malloc(). Encouraged by: jeffr, rwatson Reviewed by: gibbs, scottl Approved by: re (scottl)
2005-07-01 15:21:30 +00:00
free(atio, M_SCSIBH);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
}
break;
}
Bring legacy CAM target implementation back into API/KPI-coherent and even functional state. While CTL is much more superior target from all points, there is no reason why this code should not work. Tested with ahc(4) as target side HBA. MFC after: 2 weeks
2013-09-01 13:01:59 +00:00
case XPT_IMMEDIATE_NOTIFY:
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
{
Propagate CAM_DIS_DISCONNECT on through: 1. If we get frozen, unfreeze for disable disconnects. 2. Put CAM_DIS_DISCONNECT commands at the head of the work queue (we have a target still connected and we can't run anything else until this command completes). If we had an error sending the last CTIO, unfreeze the queue anyway.
2001-07-30 00:19:50 +00:00
int frozen;
frozen = (done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0;
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
if (softc->state == TARGBH_STATE_TEARDOWN
|| done_ccb->ccb_h.status == CAM_REQ_ABORTED) {
printf("Freed an immediate notify\n");
- Providing fine-grained malloc statistic by replacing M_DEVBUF with module-specific malloc types. These should help us to pinpoint the possible memory leakage in the future. - Implementing xpt_alloc_ccb_nowait() and replacing all malloc/free based CCB memory management with xpt_alloc_ccb[_nowait]/xpt_free_ccb. Hopefully this would be helpful if someday we move the CCB allocator to use UMA instead of malloc(). Encouraged by: jeffr, rwatson Reviewed by: gibbs, scottl Approved by: re (scottl)
2005-07-01 15:21:30 +00:00
xpt_free_ccb(done_ccb);
Propagate CAM_DIS_DISCONNECT on through: 1. If we get frozen, unfreeze for disable disconnects. 2. Put CAM_DIS_DISCONNECT commands at the head of the work queue (we have a target still connected and we can't run anything else until this command completes). If we had an error sending the last CTIO, unfreeze the queue anyway.
2001-07-30 00:19:50 +00:00
} else {
/* Requeue for another immediate event */
xpt_action(done_ccb);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
}
Propagate CAM_DIS_DISCONNECT on through: 1. If we get frozen, unfreeze for disable disconnects. 2. Put CAM_DIS_DISCONNECT commands at the head of the work queue (we have a target still connected and we can't run anything else until this command completes). If we had an error sending the last CTIO, unfreeze the queue anyway.
2001-07-30 00:19:50 +00:00
if (frozen != 0)
cam_release_devq(periph->path,
/*relsim_flags*/0,
/*opening reduction*/0,
/*timeout*/0,
/*getcount_only*/0);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
break;
}
Silence errors. Reduce the number of accept target I/O entries we allow to better exercise the resource shortage handling code in controller drivers.
1999-03-05 23:21:28 +00:00
default:
panic("targbhdone: Unexpected ccb opcode");
break;
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
}
}
Silence errors. Reduce the number of accept target I/O entries we allow to better exercise the resource shortage handling code in controller drivers.
1999-03-05 23:21:28 +00:00
#ifdef NOTYET
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
static int
targbherror(union ccb *ccb, u_int32_t cam_flags, u_int32_t sense_flags)
{
return 0;
}
Silence errors. Reduce the number of accept target I/O entries we allow to better exercise the resource shortage handling code in controller drivers.
1999-03-05 23:21:28 +00:00
#endif
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
static struct targbh_cmd_desc*
targbhallocdescr()
{
struct targbh_cmd_desc* descr;
/* Allocate the targbh_descr structure */
descr = (struct targbh_cmd_desc *)malloc(sizeof(*descr),
- Providing fine-grained malloc statistic by replacing M_DEVBUF with module-specific malloc types. These should help us to pinpoint the possible memory leakage in the future. - Implementing xpt_alloc_ccb_nowait() and replacing all malloc/free based CCB memory management with xpt_alloc_ccb[_nowait]/xpt_free_ccb. Hopefully this would be helpful if someday we move the CCB allocator to use UMA instead of malloc(). Encouraged by: jeffr, rwatson Reviewed by: gibbs, scottl Approved by: re (scottl)
2005-07-01 15:21:30 +00:00
M_SCSIBH, M_NOWAIT);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
if (descr == NULL)
return (NULL);
bzero(descr, sizeof(*descr));
/* Allocate buffer backing store */
- Providing fine-grained malloc statistic by replacing M_DEVBUF with module-specific malloc types. These should help us to pinpoint the possible memory leakage in the future. - Implementing xpt_alloc_ccb_nowait() and replacing all malloc/free based CCB memory management with xpt_alloc_ccb[_nowait]/xpt_free_ccb. Hopefully this would be helpful if someday we move the CCB allocator to use UMA instead of malloc(). Encouraged by: jeffr, rwatson Reviewed by: gibbs, scottl Approved by: re (scottl)
2005-07-01 15:21:30 +00:00
descr->backing_store = malloc(MAX_BUF_SIZE, M_SCSIBH, M_NOWAIT);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
if (descr->backing_store == NULL) {
- Providing fine-grained malloc statistic by replacing M_DEVBUF with module-specific malloc types. These should help us to pinpoint the possible memory leakage in the future. - Implementing xpt_alloc_ccb_nowait() and replacing all malloc/free based CCB memory management with xpt_alloc_ccb[_nowait]/xpt_free_ccb. Hopefully this would be helpful if someday we move the CCB allocator to use UMA instead of malloc(). Encouraged by: jeffr, rwatson Reviewed by: gibbs, scottl Approved by: re (scottl)
2005-07-01 15:21:30 +00:00
free(descr, M_SCSIBH);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
return (NULL);
}
descr->max_size = MAX_BUF_SIZE;
return (descr);
}
static void
targbhfreedescr(struct targbh_cmd_desc *descr)
{
- Providing fine-grained malloc statistic by replacing M_DEVBUF with module-specific malloc types. These should help us to pinpoint the possible memory leakage in the future. - Implementing xpt_alloc_ccb_nowait() and replacing all malloc/free based CCB memory management with xpt_alloc_ccb[_nowait]/xpt_free_ccb. Hopefully this would be helpful if someday we move the CCB allocator to use UMA instead of malloc(). Encouraged by: jeffr, rwatson Reviewed by: gibbs, scottl Approved by: re (scottl)
2005-07-01 15:21:30 +00:00
free(descr->backing_store, M_SCSIBH);
free(descr, M_SCSIBH);
The target mode 'Black Hole' device. This peripheral driver provides inquiry data and sense information for target mode devices for which no other peripheral driver is attached. This simplifies the task of dealing with luns that are not otherwise enabled for target mode if the controller does not have firmware that automatically deals with this case (e.g. the aic7xxx driver).
1999-01-14 06:00:29 +00:00
}
Reference in New Issue Copy Permalink