freebsd-dev/etc/network.subr

#!/bin/sh -
#
# $FreeBSD$
#	From: @(#)netstart	5.9 (Berkeley) 3/30/91

# Note that almost all of the user-configurable behavior is no longer in
# this file, but rather in /etc/defaults/rc.conf.  Please check that file
# first before contemplating any changes here.  If you do need to change
# this file for some reason, we would like to know about it.

# First pass startup stuff.
#
network_pass1() {
	echo -n 'Doing initial network setup:'

	# Convert host.conf to nsswitch.conf if necessary
	if [ -f "/etc/host.conf" ]; then
		echo ""
		echo "Warning: /etc/host.conf is no longer used"
		if [ -f "/etc/nsswitch.conf" ]; then
		    echo "  /etc/nsswitch.conf will be used instead"
		else
		    echo "  /etc/nsswitch.conf will be created for you"
		    convert_host_conf /etc/host.conf /etc/nsswitch.conf
		fi
	fi

	# Set the host name if it is not already set
	#
	if [ -z "`hostname -s`" ]; then
		hostname ${hostname}
		echo -n ' hostname'
	fi

	# Establish ipfilter ruleset as early as possible (best in
	# addition to IPFILTER_DEFAULT_BLOCK in the kernel config file)
	#
	case "${ipfilter_enable}" in
	[Yy][Ee][Ss])
		if [ -r "${ipfilter_rules}" ]; then
			echo -n ' ipfilter';
			${ipfilter_program:-ipf -Fa -f} "${ipfilter_rules}" ${ipfilter_flags}
			case "${ipmon_enable}" in
			[Yy][Ee][Ss])
				echo -n ' ipmon'
				${ipmon_program:-ipmon} ${ipmon_flags}
				;;
			esac
			case "${ipnat_enable}" in
			[Yy][Ee][Ss])
				if [ -r "${ipnat_rules}" ]; then
					echo -n ' ipnat';
					${ipnat_program:-ipnat -CF -f} "${ipnat_rules}" ${ipnat_flags}
				else
					echo -n ' NO IPNAT RULES'
				fi
				;;
			esac
		else
			ipfilter_enable="NO"
			echo -n ' NO IPF RULES'
		fi
		;;
	esac

	# Set the domainname if we're using NIS
	#
	case ${nisdomainname} in
	[Nn][Oo] | '')
		;;
	*)
		domainname ${nisdomainname}
		echo -n ' domain'
		;;
	esac

	echo '.'

	# Initial ATM interface configuration
	#
	case ${atm_enable} in
	[Yy][Ee][Ss])
		if [ -r /etc/rc.atm ]; then
			. /etc/rc.atm
			atm_pass1
		fi
		;;
	esac

	# Special options for sppp(4) interfaces go here.  These need
	# to go _before_ the general ifconfig section, since in the case
	# of hardwired (no link1 flag) but required authentication, you
	# cannot pass auth parameters down to the already running interface.
	#
	for ifn in ${sppp_interfaces}; do
		eval spppcontrol_args=\$spppconfig_${ifn}
		if [ -n "${spppcontrol_args}" ]; then
			# The auth secrets might contain spaces; in order
			# to retain the quotation, we need to eval them
			# here.
			eval spppcontrol ${ifn} ${spppcontrol_args}
		fi
	done

	# Set up all the network interfaces, calling startup scripts if needed
	#
	case ${network_interfaces} in
	[Aa][Uu][Tt][Oo])
		network_interfaces="`ifconfig -l`"
		;;
	esac

	dhcp_interfaces=""
	for ifn in ${network_interfaces}; do
		if [ -r /etc/start_if.${ifn} ]; then
			. /etc/start_if.${ifn}
			eval showstat_$ifn=1
		fi

		# Do the primary ifconfig if specified
		#
		eval ifconfig_args=\$ifconfig_${ifn}

		case ${ifconfig_args} in
		'')
			;;
		[Dd][Hh][Cc][Pp])
			# DHCP inits are done all in one go below
			dhcp_interfaces="$dhcp_interfaces $ifn"
			eval showstat_$ifn=1
			;;
		*)
			ifconfig ${ifn} ${ifconfig_args}
			eval showstat_$ifn=1
			;;
		esac
	done

	if [ ! -z "${dhcp_interfaces}" ]; then
		${dhcp_program:-/sbin/dhclient} ${dhcp_flags} ${dhcp_interfaces}
	fi

	for ifn in ${network_interfaces}; do
		# Check to see if aliases need to be added
		#
		alias=0
		while : ; do
			eval ifconfig_args=\$ifconfig_${ifn}_alias${alias}
			if [ -n "${ifconfig_args}" ]; then
				ifconfig ${ifn} ${ifconfig_args} alias
				eval showstat_$ifn=1
				alias=`expr ${alias} + 1`
			else
				break;
			fi
		done

		# Do ipx address if specified
		#
		eval ifconfig_args=\$ifconfig_${ifn}_ipx
		if [ -n "${ifconfig_args}" ]; then
			ifconfig ${ifn} ${ifconfig_args}
			eval showstat_$ifn=1
		fi
	done

	for ifn in ${network_interfaces}; do
		eval showstat=\$showstat_${ifn}
		if [ ! -z ${showstat} ]; then
			ifconfig ${ifn}
		fi
	done

	# ISDN subsystem startup
	#
	case ${isdn_enable} in
	[Yy][Ee][Ss])
		if [ -r /etc/rc.isdn ]; then
			. /etc/rc.isdn
		fi
		;;
	esac

	# Start user ppp if required.  This must happen before natd.
	#
	case ${ppp_enable} in
	[Yy][Ee][Ss])
		# Establish ppp mode.
		#
		if [ "${ppp_mode}" != "ddial" -a "${ppp_mode}" != "direct" \
			-a "${ppp_mode}" != "dedicated" \
			-a "${ppp_mode}" != "background" ]; then
			ppp_mode="auto"
		fi

		ppp_command="/usr/sbin/ppp -quiet -${ppp_mode}"

		# Switch on NAT mode?
		#
		case ${ppp_nat} in
		[Yy][Ee][Ss])
			ppp_command="${ppp_command} -nat"
			;;
		esac

		ppp_command="${ppp_command} ${ppp_profile}"

		echo -n "Starting ppp as \"${ppp_user}\""
		su -m ${ppp_user} -c "exec ${ppp_command}"
		;;
	esac

	# Initialize IP filtering using ipfw
	#
	if /sbin/ipfw -q flush > /dev/null 2>&1; then
		firewall_in_kernel=1
	else
		firewall_in_kernel=0
	fi

	case ${firewall_enable} in
	[Yy][Ee][Ss])
		if [ "${firewall_in_kernel}" -eq 0 ] && kldload ipfw; then
			firewall_in_kernel=1
			echo "Kernel firewall module loaded."
		elif [ "${firewall_in_kernel}" -eq 0 ]; then
			echo "Warning: firewall kernel module failed to load."
		fi
		;;
	esac

	# Load the filters if required
	#
	case ${firewall_in_kernel} in
	1)
		if [ -z "${firewall_script}" ]; then
			firewall_script=/etc/rc.firewall
		fi

		case ${firewall_enable} in
		[Yy][Ee][Ss])
			if [ -r "${firewall_script}" ]; then
				. "${firewall_script}"
				echo -n 'Firewall rules loaded, starting divert daemons:'

				# Network Address Translation daemon
				#
				case ${natd_enable} in
				[Yy][Ee][Ss])
					if [ -n "${natd_interface}" ]; then
						if echo ${natd_interface} | \
							grep -q -E '^[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+$'; then
							natd_ifarg="-a ${natd_interface}"
						else
							natd_ifarg="-n ${natd_interface}"
						fi

						echo -n ' natd'; ${natd_program:-/sbin/natd} ${natd_flags} ${natd_ifarg}
					fi
					;;
				esac

				echo '.'

			elif [ "`ipfw l 65535`" = "65535 deny ip from any to any" ]; then
				echo -n "Warning: kernel has firewall functionality, "
				echo "but firewall rules are not enabled."
				echo "		 All ip services are disabled."
			fi

			case ${firewall_logging} in
			[Yy][Ee][Ss] | '')
				echo 'Firewall logging=YES'
				sysctl -w net.inet.ip.fw.verbose=1 >/dev/null
				;;
			*)
				;;
			esac

			;;
		esac
		;;
	esac

	# Additional ATM interface configuration
	#
	if [ -n "${atm_pass1_done}" ]; then
		atm_pass2
	fi

	# Configure routing
	#
	case ${defaultrouter} in
	[Nn][Oo] | '')
		;;
	*)
		static_routes="default ${static_routes}"
		route_default="default ${defaultrouter}"
		;;
	esac

	# Set up any static routes.  This should be done before router discovery.
	#
	if [ -n "${static_routes}" ]; then
		for i in ${static_routes}; do
			eval route_args=\$route_${i}
			route add ${route_args}
		done
	fi

	echo -n 'Additional routing options:'
	case ${tcp_extensions} in
	[Yy][Ee][Ss] | '')
		;;
	*)
		echo -n ' tcp extensions=NO'
		sysctl -w net.inet.tcp.rfc1323=0 >/dev/null
		;;
	esac

	case ${icmp_bmcastecho} in
	[Yy][Ee][Ss])
		echo -n ' broadcast ping responses=YES'
		sysctl -w net.inet.icmp.bmcastecho=1 >/dev/null
		;;
	esac

	case ${icmp_drop_redirect} in
	[Yy][Ee][Ss])
		echo -n ' ignore ICMP redirect=YES'
		sysctl -w net.inet.icmp.drop_redirect=1 >/dev/null
		;;
	esac

	case ${icmp_log_redirect} in
	[Yy][Ee][Ss])
		echo -n ' log ICMP redirect=YES'
		sysctl -w net.inet.icmp.log_redirect=1 >/dev/null
		;;
	esac

	case ${gateway_enable} in
	[Yy][Ee][Ss])
		echo -n ' IP gateway=YES'
		sysctl -w net.inet.ip.forwarding=1 >/dev/null
		;;
	esac

	case ${forward_sourceroute} in
	[Yy][Ee][Ss])
		echo -n ' do source routing=YES'
		sysctl -w net.inet.ip.sourceroute=1 >/dev/null
		;;
	esac

	case ${accept_sourceroute} in
	[Yy][Ee][Ss])
		echo -n ' accept source routing=YES'
		sysctl -w net.inet.ip.accept_sourceroute=1 >/dev/null
		;;
	esac

	case ${tcp_keepalive} in
	[Yy][Ee][Ss])
		echo -n ' TCP keepalive=YES'
		sysctl -w net.inet.tcp.always_keepalive=1 >/dev/null
		;;
	esac

	case ${tcp_restrict_rst} in
	[Yy][Ee][Ss])
		echo -n ' restrict TCP reset=YES'
		sysctl -w net.inet.tcp.restrict_rst=1 >/dev/null
		;;
	esac

	case ${tcp_drop_synfin} in
	[Yy][Ee][Ss])
		echo -n ' drop SYN+FIN packets=YES'
		sysctl -w net.inet.tcp.drop_synfin=1 >/dev/null
		;;
	esac

	case ${ipxgateway_enable} in
	[Yy][Ee][Ss])
		echo -n ' IPX gateway=YES'
		sysctl -w net.ipx.ipx.ipxforwarding=1 >/dev/null
		;;
	esac

	case ${arpproxy_all} in
	[Yy][Ee][Ss])
		echo -n ' ARP proxyall=YES'
		sysctl -w net.link.ether.inet.proxyall=1 >/dev/null
		;;
	esac

	case ${ip_portrange_first} in
	[Nn][Oo] | '')
		;;
	*)
		echo -n ' ip_portrange_first=$ip_portrange_first'
		sysctl -w net.inet.ip.portrange.first=$ip_portrange_first >/dev/null
		;;
	esac

	case ${ip_portrange_last} in
	[Nn][Oo] | '')
		;;
	*)
		echo -n ' ip_portrange_last=$ip_portrange_last'
		sysctl -w net.inet.ip.portrange.last=$ip_portrange_last >/dev/null
		;;
	esac

	echo '.'

	case ${ipsec_enable} in
	[Yy][Ee][Ss])
		if [ -f ${ipsec_file} ]; then
		    echo ' ipsec: enabled'
		    setkey -f ${ipsec_file}
		else
		    echo ' ipsec: file not found'
		fi
		;;
	esac

	echo -n 'routing daemons:'
	case ${router_enable} in
	[Yy][Ee][Ss])
		echo -n " ${router}";	${router} ${router_flags}
		;;
	esac

	case ${ipxrouted_enable} in
	[Yy][Ee][Ss])
		echo -n ' IPXrouted'
		IPXrouted ${ipxrouted_flags} > /dev/null 2>&1
		;;
	esac

	case ${mrouted_enable} in
	[Yy][Ee][Ss])
		echo -n ' mrouted';	mrouted ${mrouted_flags}
		;;
	esac

	case ${rarpd_enable} in
	[Yy][Ee][Ss])
		echo -n ' rarpd';	rarpd ${rarpd_flags}
		;;
	esac
	echo '.'

	# Let future generations know we made it.
	#
	network_pass1_done=YES
}

network_pass2() {
	echo -n 'Doing additional network setup:'
	case ${named_enable} in
	[Yy][Ee][Ss])
		echo -n ' named';	${named_program:-named} ${named_flags}
		;;
	esac

	case ${ntpdate_enable} in
	[Yy][Ee][Ss])
		echo -n ' ntpdate'
		${ntpdate_program:-ntpdate} ${ntpdate_flags} >/dev/null 2>&1
		;;
	esac

	case ${xntpd_enable} in
	[Yy][Ee][Ss])
		echo -n ' ntpd';	${xntpd_program:-ntpd} ${xntpd_flags}
		;;
	esac

	case ${timed_enable} in
	[Yy][Ee][Ss])
		echo -n ' timed';	timed ${timed_flags}
		;;
	esac

	case ${portmap_enable} in
	[Yy][Ee][Ss])
		echo -n ' portmap';	${portmap_program:-/usr/sbin/portmap} ${portmap_flags}
		;;
	esac

	# Start ypserv if we're an NIS server.
	# Run rpc.ypxfrd and rpc.yppasswdd only on the NIS master server.
	#
	case ${nis_server_enable} in
	[Yy][Ee][Ss])
		echo -n ' ypserv'; ypserv ${nis_server_flags}

		case ${nis_ypxfrd_enable} in
		[Yy][Ee][Ss])
			echo -n ' rpc.ypxfrd'
			rpc.ypxfrd ${nis_ypxfrd_flags}
			;;
		esac

		case ${nis_yppasswdd_enable} in
		[Yy][Ee][Ss])
			echo -n ' rpc.yppasswdd'
			rpc.yppasswdd ${nis_yppasswdd_flags}
			;;
		esac
		;;
	esac

	# Start ypbind if we're an NIS client
	#
	case ${nis_client_enable} in
	[Yy][Ee][Ss])
		echo -n ' ypbind'; ypbind ${nis_client_flags}
		case ${nis_ypset_enable} in
		[Yy][Ee][Ss])
			echo -n ' ypset';	ypset ${nis_ypset_flags}
			;;
		esac
		;;
	esac

	# Start keyserv if we are running Secure RPC
	#
	case ${keyserv_enable} in
	[Yy][Ee][Ss])
		echo -n ' keyserv';	keyserv ${keyserv_flags}
		;;
	esac

	# Start ypupdated if we are running Secure RPC and we are NIS master
	#
	case ${rpc_ypupdated_enable} in
	[Yy][Ee][Ss])
		echo -n ' rpc.ypupdated';	rpc.ypupdated
		;;
	esac

	# Start ATM daemons
	if [ -n "${atm_pass2_done}" ]; then
		atm_pass3
	fi

	echo '.'
	network_pass2_done=YES
}

network_pass3() {
	echo -n 'Starting final network daemons:'

	case ${nfs_server_enable} in
	[Yy][Ee][Ss])
		if [ -r /etc/exports ]; then
			echo -n ' mountd'

			case ${weak_mountd_authentication} in
			[Yy][Ee][Ss])
				mountd_flags="${mountd_flags} -n"
				;;
			esac

			mountd ${mountd_flags}

			case ${nfs_reserved_port_only} in
			[Yy][Ee][Ss])
				echo -n ' NFS on reserved port only=YES'
				sysctl -w vfs.nfs.nfs_privport=1 >/dev/null
				;;
			esac

			echo -n ' nfsd';	nfsd ${nfs_server_flags}

			if [ -n "${nfs_bufpackets}" ]; then
				sysctl -w vfs.nfs.bufpackets=${nfs_bufpackets} \
					> /dev/null
			fi

			case ${rpc_lockd_enable} in
			[Yy][Ee][Ss])
				echo -n ' rpc.lockd';	rpc.lockd
				;;
			esac

			case ${rpc_statd_enable} in
			[Yy][Ee][Ss])
				echo -n ' rpc.statd';	rpc.statd
				;;
			esac
		fi
		;;
	*)
		case ${single_mountd_enable} in
		[Yy][Ee][Ss])
			if [ -r /etc/exports ]; then
				echo -n ' mountd'

				case ${weak_mountd_authentication} in
				[Yy][Ee][Ss])
					mountd_flags="-n"
					;;
				esac

				mountd ${mountd_flags}
			fi
			;;
		esac
		;;
	esac

	case ${nfs_client_enable} in
	[Yy][Ee][Ss])
		echo -n ' nfsiod';	nfsiod ${nfs_client_flags}
		if [ -n "${nfs_access_cache}" ]; then
		echo -n " NFS access cache time=${nfs_access_cache}"
		sysctl -w vfs.nfs.access_cache_timeout=${nfs_access_cache} \
			>/dev/null
		fi
		;;
	esac

	# If /var/db/mounttab exists, some nfs-server has not been
	# sucessfully notified about a previous client shutdown.
	# If there is no /var/db/mounttab, we do nothing.
	if [ -f /var/db/mounttab ]; then
		rpc.umntall -k
	fi

	case ${amd_enable} in
	[Yy][Ee][Ss])
		echo -n ' amd'
		case ${amd_map_program} in
		[Nn][Oo] | '')
			;;
		*)
			amd_flags="${amd_flags} `eval ${amd_map_program}`"
			;;
		esac

		if [ -n "${amd_flags}" ]; then
			amd -p ${amd_flags} > /var/run/amd.pid 2> /dev/null
		else
			amd 2> /dev/null
		fi
		;;
	esac

	case ${rwhod_enable} in
	[Yy][Ee][Ss])
		echo -n ' rwhod';	rwhod ${rwhod_flags}
		;;
	esac

	# Kerberos runs ONLY on the Kerberos server machine
	case ${kerberos_server_enable} in
	[Yy][Ee][Ss])
		case ${kerberos_stash} in
		[Yy][Ee][Ss])
			stash_flag=-n
			;;
		*)
			stash_flag=
			;;
		esac

		echo -n ' kerberos'
		kerberos ${stash_flag} >> /var/log/kerberos.log &

		case ${kadmind_server_enable} in
		[Yy][Ee][Ss])
			echo -n ' kadmind'
			(sleep 20; kadmind ${stash_flag} >/dev/null 2>&1 &) &
			;;
		esac
		unset stash_flag
		;;
	esac

	case ${pppoed_enable} in
	[Yy][Ee][Ss])
		if [ -n "${pppoed_provider}" ]; then
			pppoed_flags="${pppoed_flags} -p ${pppoed_provider}"
		fi
		echo -n ' pppoed';
		/usr/libexec/pppoed ${pppoed_flags} ${pppoed_interface}
		;;
	esac

	case ${sshd_enable} in
	[Yy][Ee][Ss])
		if [ ! -f /etc/ssh/ssh_host_key ]; then
			echo ' creating ssh RSA host key';
			/usr/bin/ssh-keygen -N "" -f /etc/ssh/ssh_host_key
		fi
		if [ ! -f /etc/ssh/ssh_host_dsa_key ]; then
			echo ' creating ssh DSA host key';
			/usr/bin/ssh-keygen -d -N "" -f /etc/ssh/ssh_host_dsa_key
		fi
		;;
	esac

	echo '.'
	network_pass3_done=YES
}

network_pass4() {
	echo -n 'Additional TCP options:'
	case ${log_in_vain} in
	[Nn][Oo] | '')
		;;
	*)
		echo -n ' log_in_vain=YES'
		sysctl -w net.inet.tcp.log_in_vain=1 >/dev/null
		sysctl -w net.inet.udp.log_in_vain=1 >/dev/null
		;;
	esac

	echo '.'
	network_pass4_done=YES
}

convert_host_conf() {
    host_conf=$1; shift;
    nsswitch_conf=$1; shift;
    awk '                                                                   \
        /^[:blank:]*#/       { next }                                       \
        /(hosts|local|file)/ { nsswitch[c] = "files"; c++; next }           \
        /(dns|bind)/         { nsswitch[c] = "dns";   c++; next }           \
        /nis/                { nsswitch[c] = "nis";   c++; next }           \
        { printf "Warning: unrecognized line [%s]", $0 > "/dev/stderr" }    \
        END {                                                               \
                printf "hosts: ";                                           \
                for (i in nsswitch) printf "%s ", nsswitch[i];              \
                printf "\n";                                                \
        }' < $host_conf > $nsswitch_conf
}