d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
82ce05526b
freebsd-dev/sys/arm/nvidia/tegra_lic.c

290 lines
7.5 KiB
C
Raw Normal View History

Import basic support for Nvidia Jetson TK1 board and tegra124 SoC. The following pheripherals are supported: UART, MMC, AHCI, EHCI, PCIe, I2C, PMIC, GPIO, CPU temperature and clock. Note: The PCIe driver is pure mash at this moment. It will be reworked immediately when both D5237 and D2579 enter the current tree.
2016-03-16 13:01:48 +00:00
/*-
* Copyright (c) 2016 Michal Meloun <mmel@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* Local interrupt controller driver for Tegra SoCs.
*/
#include <sys/param.h>
#include <sys/module.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/kernel.h>
#include <sys/rman.h>
#include <machine/fdt.h>
#include <machine/intr.h>
#include <machine/resource.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include "pic_if.h"
#define LIC_VIRQ_CPU 0x00
#define LIC_VIRQ_COP 0x04
#define LIC_VFRQ_CPU 0x08
#define LIC_VFRQ_COP 0x0c
#define LIC_ISR 0x10
#define LIC_FIR 0x14
#define LIC_FIR_SET 0x18
#define LIC_FIR_CLR 0x1c
#define LIC_CPU_IER 0x20
#define LIC_CPU_IER_SET 0x24
#define LIC_CPU_IER_CLR 0x28
#define LIC_CPU_IEP_CLASS 0x2C
#define LIC_COP_IER 0x30
#define LIC_COP_IER_SET 0x34
#define LIC_COP_IER_CLR 0x38
#define LIC_COP_IEP_CLASS 0x3c
#define WR4(_sc, _b, _r, _v) bus_write_4((_sc)->mem_res[_b], (_r), (_v))
#define RD4(_sc, _b, _r) bus_read_4((_sc)->mem_res[_b], (_r))
static struct resource_spec lic_spec[] = {
{ SYS_RES_MEMORY, 0, RF_ACTIVE },
{ SYS_RES_MEMORY, 1, RF_ACTIVE },
{ SYS_RES_MEMORY, 2, RF_ACTIVE },
{ SYS_RES_MEMORY, 3, RF_ACTIVE },
{ SYS_RES_MEMORY, 4, RF_ACTIVE },
{ -1, 0 }
};
static struct ofw_compat_data compat_data[] = {
{"nvidia,tegra124-ictlr", 1},
{NULL, 0}
};
struct tegra_lic_sc {
device_t dev;
struct resource *mem_res[nitems(lic_spec)];
device_t parent;
};
static int
INTRNG: Rework handling with resources. Partially revert r301453. - Read interrupt properties at bus enumeration time and store it into global mapping table. - At bus_activate_resource() time, given mapping entry is resolved and connected to real interrupt source. A copy of mapping entry is attached to given resource. - At bus_setup_intr() time, mapping entry stored in resource is used for delivery of requested interrupt configuration. - For MSI/MSIX interrupts, mapping entry is created within pci_alloc_msi()/pci_alloc_msix() call. - For legacy PCI interrupts, mapping entry must be created within pcib_route_interrupt() by pcib driver itself. Reviewed by: nwhitehorn, andrew Differential Revision: https://reviews.freebsd.org/D7493
2016-08-19 10:52:39 +00:00
tegra_lic_activate_intr(device_t dev, struct intr_irqsrc *isrc,
Remove FDT specific parts from INTRNG. Change its interface to make it universal. (1) New struct intr_map_data is defined as a container for arbitrary description of an interrupt used by a device. Typically, an interrupt number and configuration relevant to an interrupt controller is encoded in such description. However, any additional information may be encoded too like a set of cpus on which an interrupt should be enabled or vendor specific data needed for setup of an interrupt in controller. The struct intr_map_data itself is meant to be opaque for INTRNG. (2) An intr_map_irq() function is created which takes an interrupt controller identification and struct intr_map_data as arguments and returns global interrupt number which identifies an interrupt. (3) A set of functions to be used by bus drivers is created as well as a corresponding set of methods for interrupt controller drivers. These sets take both struct resource and struct intr_map_data as one of the arguments. There is a goal to keep struct intr_map_data in struct resource, however, this way a final solution is not limited to that. (4) Other small changes are done to reflect new situation. This is only first step aiming to create stable interface for interrupt controller drivers. Thus, some temporary solution is taken. Interrupt descriptions for devices are stored in INTRNG and two specific mapping function are created to be temporary used by bus drivers. That's why the struct intr_map_data is not opaque for INTRNG now. This temporary solution will be replaced by final one in next step. Differential Revision: https://reviews.freebsd.org/D5730
2016-04-04 09:15:25 +00:00
struct resource *res, struct intr_map_data *data)
Import basic support for Nvidia Jetson TK1 board and tegra124 SoC. The following pheripherals are supported: UART, MMC, AHCI, EHCI, PCIe, I2C, PMIC, GPIO, CPU temperature and clock. Note: The PCIe driver is pure mash at this moment. It will be reworked immediately when both D5237 and D2579 enter the current tree.
2016-03-16 13:01:48 +00:00
{
struct tegra_lic_sc *sc = device_get_softc(dev);
INTRNG: Rework handling with resources. Partially revert r301453. - Read interrupt properties at bus enumeration time and store it into global mapping table. - At bus_activate_resource() time, given mapping entry is resolved and connected to real interrupt source. A copy of mapping entry is attached to given resource. - At bus_setup_intr() time, mapping entry stored in resource is used for delivery of requested interrupt configuration. - For MSI/MSIX interrupts, mapping entry is created within pci_alloc_msi()/pci_alloc_msix() call. - For legacy PCI interrupts, mapping entry must be created within pcib_route_interrupt() by pcib driver itself. Reviewed by: nwhitehorn, andrew Differential Revision: https://reviews.freebsd.org/D7493
2016-08-19 10:52:39 +00:00
return (PIC_ACTIVATE_INTR(sc->parent, isrc, res, data));
Import basic support for Nvidia Jetson TK1 board and tegra124 SoC. The following pheripherals are supported: UART, MMC, AHCI, EHCI, PCIe, I2C, PMIC, GPIO, CPU temperature and clock. Note: The PCIe driver is pure mash at this moment. It will be reworked immediately when both D5237 and D2579 enter the current tree.
2016-03-16 13:01:48 +00:00
}
Remove FDT specific parts from INTRNG. Change its interface to make it universal. (1) New struct intr_map_data is defined as a container for arbitrary description of an interrupt used by a device. Typically, an interrupt number and configuration relevant to an interrupt controller is encoded in such description. However, any additional information may be encoded too like a set of cpus on which an interrupt should be enabled or vendor specific data needed for setup of an interrupt in controller. The struct intr_map_data itself is meant to be opaque for INTRNG. (2) An intr_map_irq() function is created which takes an interrupt controller identification and struct intr_map_data as arguments and returns global interrupt number which identifies an interrupt. (3) A set of functions to be used by bus drivers is created as well as a corresponding set of methods for interrupt controller drivers. These sets take both struct resource and struct intr_map_data as one of the arguments. There is a goal to keep struct intr_map_data in struct resource, however, this way a final solution is not limited to that. (4) Other small changes are done to reflect new situation. This is only first step aiming to create stable interface for interrupt controller drivers. Thus, some temporary solution is taken. Interrupt descriptions for devices are stored in INTRNG and two specific mapping function are created to be temporary used by bus drivers. That's why the struct intr_map_data is not opaque for INTRNG now. This temporary solution will be replaced by final one in next step. Differential Revision: https://reviews.freebsd.org/D5730
2016-04-04 09:15:25 +00:00
static void
tegra_lic_disable_intr(device_t dev, struct intr_irqsrc *isrc)
Import basic support for Nvidia Jetson TK1 board and tegra124 SoC. The following pheripherals are supported: UART, MMC, AHCI, EHCI, PCIe, I2C, PMIC, GPIO, CPU temperature and clock. Note: The PCIe driver is pure mash at this moment. It will be reworked immediately when both D5237 and D2579 enter the current tree.
2016-03-16 13:01:48 +00:00
{
struct tegra_lic_sc *sc = device_get_softc(dev);
Remove FDT specific parts from INTRNG. Change its interface to make it universal. (1) New struct intr_map_data is defined as a container for arbitrary description of an interrupt used by a device. Typically, an interrupt number and configuration relevant to an interrupt controller is encoded in such description. However, any additional information may be encoded too like a set of cpus on which an interrupt should be enabled or vendor specific data needed for setup of an interrupt in controller. The struct intr_map_data itself is meant to be opaque for INTRNG. (2) An intr_map_irq() function is created which takes an interrupt controller identification and struct intr_map_data as arguments and returns global interrupt number which identifies an interrupt. (3) A set of functions to be used by bus drivers is created as well as a corresponding set of methods for interrupt controller drivers. These sets take both struct resource and struct intr_map_data as one of the arguments. There is a goal to keep struct intr_map_data in struct resource, however, this way a final solution is not limited to that. (4) Other small changes are done to reflect new situation. This is only first step aiming to create stable interface for interrupt controller drivers. Thus, some temporary solution is taken. Interrupt descriptions for devices are stored in INTRNG and two specific mapping function are created to be temporary used by bus drivers. That's why the struct intr_map_data is not opaque for INTRNG now. This temporary solution will be replaced by final one in next step. Differential Revision: https://reviews.freebsd.org/D5730
2016-04-04 09:15:25 +00:00
PIC_DISABLE_INTR(sc->parent, isrc);
Import basic support for Nvidia Jetson TK1 board and tegra124 SoC. The following pheripherals are supported: UART, MMC, AHCI, EHCI, PCIe, I2C, PMIC, GPIO, CPU temperature and clock. Note: The PCIe driver is pure mash at this moment. It will be reworked immediately when both D5237 and D2579 enter the current tree.
2016-03-16 13:01:48 +00:00
}
static void
Remove FDT specific parts from INTRNG. Change its interface to make it universal. (1) New struct intr_map_data is defined as a container for arbitrary description of an interrupt used by a device. Typically, an interrupt number and configuration relevant to an interrupt controller is encoded in such description. However, any additional information may be encoded too like a set of cpus on which an interrupt should be enabled or vendor specific data needed for setup of an interrupt in controller. The struct intr_map_data itself is meant to be opaque for INTRNG. (2) An intr_map_irq() function is created which takes an interrupt controller identification and struct intr_map_data as arguments and returns global interrupt number which identifies an interrupt. (3) A set of functions to be used by bus drivers is created as well as a corresponding set of methods for interrupt controller drivers. These sets take both struct resource and struct intr_map_data as one of the arguments. There is a goal to keep struct intr_map_data in struct resource, however, this way a final solution is not limited to that. (4) Other small changes are done to reflect new situation. This is only first step aiming to create stable interface for interrupt controller drivers. Thus, some temporary solution is taken. Interrupt descriptions for devices are stored in INTRNG and two specific mapping function are created to be temporary used by bus drivers. That's why the struct intr_map_data is not opaque for INTRNG now. This temporary solution will be replaced by final one in next step. Differential Revision: https://reviews.freebsd.org/D5730
2016-04-04 09:15:25 +00:00
tegra_lic_enable_intr(device_t dev, struct intr_irqsrc *isrc)
Import basic support for Nvidia Jetson TK1 board and tegra124 SoC. The following pheripherals are supported: UART, MMC, AHCI, EHCI, PCIe, I2C, PMIC, GPIO, CPU temperature and clock. Note: The PCIe driver is pure mash at this moment. It will be reworked immediately when both D5237 and D2579 enter the current tree.
2016-03-16 13:01:48 +00:00
{
struct tegra_lic_sc *sc = device_get_softc(dev);
Remove FDT specific parts from INTRNG. Change its interface to make it universal. (1) New struct intr_map_data is defined as a container for arbitrary description of an interrupt used by a device. Typically, an interrupt number and configuration relevant to an interrupt controller is encoded in such description. However, any additional information may be encoded too like a set of cpus on which an interrupt should be enabled or vendor specific data needed for setup of an interrupt in controller. The struct intr_map_data itself is meant to be opaque for INTRNG. (2) An intr_map_irq() function is created which takes an interrupt controller identification and struct intr_map_data as arguments and returns global interrupt number which identifies an interrupt. (3) A set of functions to be used by bus drivers is created as well as a corresponding set of methods for interrupt controller drivers. These sets take both struct resource and struct intr_map_data as one of the arguments. There is a goal to keep struct intr_map_data in struct resource, however, this way a final solution is not limited to that. (4) Other small changes are done to reflect new situation. This is only first step aiming to create stable interface for interrupt controller drivers. Thus, some temporary solution is taken. Interrupt descriptions for devices are stored in INTRNG and two specific mapping function are created to be temporary used by bus drivers. That's why the struct intr_map_data is not opaque for INTRNG now. This temporary solution will be replaced by final one in next step. Differential Revision: https://reviews.freebsd.org/D5730
2016-04-04 09:15:25 +00:00
PIC_ENABLE_INTR(sc->parent, isrc);
Import basic support for Nvidia Jetson TK1 board and tegra124 SoC. The following pheripherals are supported: UART, MMC, AHCI, EHCI, PCIe, I2C, PMIC, GPIO, CPU temperature and clock. Note: The PCIe driver is pure mash at this moment. It will be reworked immediately when both D5237 and D2579 enter the current tree.
2016-03-16 13:01:48 +00:00
}
Remove FDT specific parts from INTRNG. Change its interface to make it universal. (1) New struct intr_map_data is defined as a container for arbitrary description of an interrupt used by a device. Typically, an interrupt number and configuration relevant to an interrupt controller is encoded in such description. However, any additional information may be encoded too like a set of cpus on which an interrupt should be enabled or vendor specific data needed for setup of an interrupt in controller. The struct intr_map_data itself is meant to be opaque for INTRNG. (2) An intr_map_irq() function is created which takes an interrupt controller identification and struct intr_map_data as arguments and returns global interrupt number which identifies an interrupt. (3) A set of functions to be used by bus drivers is created as well as a corresponding set of methods for interrupt controller drivers. These sets take both struct resource and struct intr_map_data as one of the arguments. There is a goal to keep struct intr_map_data in struct resource, however, this way a final solution is not limited to that. (4) Other small changes are done to reflect new situation. This is only first step aiming to create stable interface for interrupt controller drivers. Thus, some temporary solution is taken. Interrupt descriptions for devices are stored in INTRNG and two specific mapping function are created to be temporary used by bus drivers. That's why the struct intr_map_data is not opaque for INTRNG now. This temporary solution will be replaced by final one in next step. Differential Revision: https://reviews.freebsd.org/D5730
2016-04-04 09:15:25 +00:00
static int
tegra_lic_map_intr(device_t dev, struct intr_map_data *data,
struct intr_irqsrc **isrcp)
Import basic support for Nvidia Jetson TK1 board and tegra124 SoC. The following pheripherals are supported: UART, MMC, AHCI, EHCI, PCIe, I2C, PMIC, GPIO, CPU temperature and clock. Note: The PCIe driver is pure mash at this moment. It will be reworked immediately when both D5237 and D2579 enter the current tree.
2016-03-16 13:01:48 +00:00
{
struct tegra_lic_sc *sc = device_get_softc(dev);
Remove FDT specific parts from INTRNG. Change its interface to make it universal. (1) New struct intr_map_data is defined as a container for arbitrary description of an interrupt used by a device. Typically, an interrupt number and configuration relevant to an interrupt controller is encoded in such description. However, any additional information may be encoded too like a set of cpus on which an interrupt should be enabled or vendor specific data needed for setup of an interrupt in controller. The struct intr_map_data itself is meant to be opaque for INTRNG. (2) An intr_map_irq() function is created which takes an interrupt controller identification and struct intr_map_data as arguments and returns global interrupt number which identifies an interrupt. (3) A set of functions to be used by bus drivers is created as well as a corresponding set of methods for interrupt controller drivers. These sets take both struct resource and struct intr_map_data as one of the arguments. There is a goal to keep struct intr_map_data in struct resource, however, this way a final solution is not limited to that. (4) Other small changes are done to reflect new situation. This is only first step aiming to create stable interface for interrupt controller drivers. Thus, some temporary solution is taken. Interrupt descriptions for devices are stored in INTRNG and two specific mapping function are created to be temporary used by bus drivers. That's why the struct intr_map_data is not opaque for INTRNG now. This temporary solution will be replaced by final one in next step. Differential Revision: https://reviews.freebsd.org/D5730
2016-04-04 09:15:25 +00:00
return (PIC_MAP_INTR(sc->parent, data, isrcp));
Import basic support for Nvidia Jetson TK1 board and tegra124 SoC. The following pheripherals are supported: UART, MMC, AHCI, EHCI, PCIe, I2C, PMIC, GPIO, CPU temperature and clock. Note: The PCIe driver is pure mash at this moment. It will be reworked immediately when both D5237 and D2579 enter the current tree.
2016-03-16 13:01:48 +00:00
}
Remove FDT specific parts from INTRNG. Change its interface to make it universal. (1) New struct intr_map_data is defined as a container for arbitrary description of an interrupt used by a device. Typically, an interrupt number and configuration relevant to an interrupt controller is encoded in such description. However, any additional information may be encoded too like a set of cpus on which an interrupt should be enabled or vendor specific data needed for setup of an interrupt in controller. The struct intr_map_data itself is meant to be opaque for INTRNG. (2) An intr_map_irq() function is created which takes an interrupt controller identification and struct intr_map_data as arguments and returns global interrupt number which identifies an interrupt. (3) A set of functions to be used by bus drivers is created as well as a corresponding set of methods for interrupt controller drivers. These sets take both struct resource and struct intr_map_data as one of the arguments. There is a goal to keep struct intr_map_data in struct resource, however, this way a final solution is not limited to that. (4) Other small changes are done to reflect new situation. This is only first step aiming to create stable interface for interrupt controller drivers. Thus, some temporary solution is taken. Interrupt descriptions for devices are stored in INTRNG and two specific mapping function are created to be temporary used by bus drivers. That's why the struct intr_map_data is not opaque for INTRNG now. This temporary solution will be replaced by final one in next step. Differential Revision: https://reviews.freebsd.org/D5730
2016-04-04 09:15:25 +00:00
static int
INTRNG: Rework handling with resources. Partially revert r301453. - Read interrupt properties at bus enumeration time and store it into global mapping table. - At bus_activate_resource() time, given mapping entry is resolved and connected to real interrupt source. A copy of mapping entry is attached to given resource. - At bus_setup_intr() time, mapping entry stored in resource is used for delivery of requested interrupt configuration. - For MSI/MSIX interrupts, mapping entry is created within pci_alloc_msi()/pci_alloc_msix() call. - For legacy PCI interrupts, mapping entry must be created within pcib_route_interrupt() by pcib driver itself. Reviewed by: nwhitehorn, andrew Differential Revision: https://reviews.freebsd.org/D7493
2016-08-19 10:52:39 +00:00
tegra_lic_deactivate_intr(device_t dev, struct intr_irqsrc *isrc,
Remove FDT specific parts from INTRNG. Change its interface to make it universal. (1) New struct intr_map_data is defined as a container for arbitrary description of an interrupt used by a device. Typically, an interrupt number and configuration relevant to an interrupt controller is encoded in such description. However, any additional information may be encoded too like a set of cpus on which an interrupt should be enabled or vendor specific data needed for setup of an interrupt in controller. The struct intr_map_data itself is meant to be opaque for INTRNG. (2) An intr_map_irq() function is created which takes an interrupt controller identification and struct intr_map_data as arguments and returns global interrupt number which identifies an interrupt. (3) A set of functions to be used by bus drivers is created as well as a corresponding set of methods for interrupt controller drivers. These sets take both struct resource and struct intr_map_data as one of the arguments. There is a goal to keep struct intr_map_data in struct resource, however, this way a final solution is not limited to that. (4) Other small changes are done to reflect new situation. This is only first step aiming to create stable interface for interrupt controller drivers. Thus, some temporary solution is taken. Interrupt descriptions for devices are stored in INTRNG and two specific mapping function are created to be temporary used by bus drivers. That's why the struct intr_map_data is not opaque for INTRNG now. This temporary solution will be replaced by final one in next step. Differential Revision: https://reviews.freebsd.org/D5730
2016-04-04 09:15:25 +00:00
struct resource *res, struct intr_map_data *data)
Import basic support for Nvidia Jetson TK1 board and tegra124 SoC. The following pheripherals are supported: UART, MMC, AHCI, EHCI, PCIe, I2C, PMIC, GPIO, CPU temperature and clock. Note: The PCIe driver is pure mash at this moment. It will be reworked immediately when both D5237 and D2579 enter the current tree.
2016-03-16 13:01:48 +00:00
{
struct tegra_lic_sc *sc = device_get_softc(dev);
INTRNG: Rework handling with resources. Partially revert r301453. - Read interrupt properties at bus enumeration time and store it into global mapping table. - At bus_activate_resource() time, given mapping entry is resolved and connected to real interrupt source. A copy of mapping entry is attached to given resource. - At bus_setup_intr() time, mapping entry stored in resource is used for delivery of requested interrupt configuration. - For MSI/MSIX interrupts, mapping entry is created within pci_alloc_msi()/pci_alloc_msix() call. - For legacy PCI interrupts, mapping entry must be created within pcib_route_interrupt() by pcib driver itself. Reviewed by: nwhitehorn, andrew Differential Revision: https://reviews.freebsd.org/D7493
2016-08-19 10:52:39 +00:00
return (PIC_DEACTIVATE_INTR(sc->parent, isrc, res, data));
Remove FDT specific parts from INTRNG. Change its interface to make it universal. (1) New struct intr_map_data is defined as a container for arbitrary description of an interrupt used by a device. Typically, an interrupt number and configuration relevant to an interrupt controller is encoded in such description. However, any additional information may be encoded too like a set of cpus on which an interrupt should be enabled or vendor specific data needed for setup of an interrupt in controller. The struct intr_map_data itself is meant to be opaque for INTRNG. (2) An intr_map_irq() function is created which takes an interrupt controller identification and struct intr_map_data as arguments and returns global interrupt number which identifies an interrupt. (3) A set of functions to be used by bus drivers is created as well as a corresponding set of methods for interrupt controller drivers. These sets take both struct resource and struct intr_map_data as one of the arguments. There is a goal to keep struct intr_map_data in struct resource, however, this way a final solution is not limited to that. (4) Other small changes are done to reflect new situation. This is only first step aiming to create stable interface for interrupt controller drivers. Thus, some temporary solution is taken. Interrupt descriptions for devices are stored in INTRNG and two specific mapping function are created to be temporary used by bus drivers. That's why the struct intr_map_data is not opaque for INTRNG now. This temporary solution will be replaced by final one in next step. Differential Revision: https://reviews.freebsd.org/D5730
2016-04-04 09:15:25 +00:00
}
static int
tegra_lic_setup_intr(device_t dev, struct intr_irqsrc *isrc,
struct resource *res, struct intr_map_data *data)
{
struct tegra_lic_sc *sc = device_get_softc(dev);
return (PIC_SETUP_INTR(sc->parent, isrc, res, data));
}
static int
tegra_lic_teardown_intr(device_t dev, struct intr_irqsrc *isrc,
struct resource *res, struct intr_map_data *data)
{
struct tegra_lic_sc *sc = device_get_softc(dev);
return (PIC_TEARDOWN_INTR(sc->parent, isrc, res, data));
Import basic support for Nvidia Jetson TK1 board and tegra124 SoC. The following pheripherals are supported: UART, MMC, AHCI, EHCI, PCIe, I2C, PMIC, GPIO, CPU temperature and clock. Note: The PCIe driver is pure mash at this moment. It will be reworked immediately when both D5237 and D2579 enter the current tree.
2016-03-16 13:01:48 +00:00
}
static void
tegra_lic_pre_ithread(device_t dev, struct intr_irqsrc *isrc)
{
struct tegra_lic_sc *sc = device_get_softc(dev);
PIC_PRE_ITHREAD(sc->parent, isrc);
}
static void
tegra_lic_post_ithread(device_t dev, struct intr_irqsrc *isrc)
{
struct tegra_lic_sc *sc = device_get_softc(dev);
PIC_POST_ITHREAD(sc->parent, isrc);
}
static void
tegra_lic_post_filter(device_t dev, struct intr_irqsrc *isrc)
{
struct tegra_lic_sc *sc = device_get_softc(dev);
PIC_POST_FILTER(sc->parent, isrc);
}
#ifdef SMP
static int
Remove FDT specific parts from INTRNG. Change its interface to make it universal. (1) New struct intr_map_data is defined as a container for arbitrary description of an interrupt used by a device. Typically, an interrupt number and configuration relevant to an interrupt controller is encoded in such description. However, any additional information may be encoded too like a set of cpus on which an interrupt should be enabled or vendor specific data needed for setup of an interrupt in controller. The struct intr_map_data itself is meant to be opaque for INTRNG. (2) An intr_map_irq() function is created which takes an interrupt controller identification and struct intr_map_data as arguments and returns global interrupt number which identifies an interrupt. (3) A set of functions to be used by bus drivers is created as well as a corresponding set of methods for interrupt controller drivers. These sets take both struct resource and struct intr_map_data as one of the arguments. There is a goal to keep struct intr_map_data in struct resource, however, this way a final solution is not limited to that. (4) Other small changes are done to reflect new situation. This is only first step aiming to create stable interface for interrupt controller drivers. Thus, some temporary solution is taken. Interrupt descriptions for devices are stored in INTRNG and two specific mapping function are created to be temporary used by bus drivers. That's why the struct intr_map_data is not opaque for INTRNG now. This temporary solution will be replaced by final one in next step. Differential Revision: https://reviews.freebsd.org/D5730
2016-04-04 09:15:25 +00:00
tegra_lic_bind_intr(device_t dev, struct intr_irqsrc *isrc)
Import basic support for Nvidia Jetson TK1 board and tegra124 SoC. The following pheripherals are supported: UART, MMC, AHCI, EHCI, PCIe, I2C, PMIC, GPIO, CPU temperature and clock. Note: The PCIe driver is pure mash at this moment. It will be reworked immediately when both D5237 and D2579 enter the current tree.
2016-03-16 13:01:48 +00:00
{
struct tegra_lic_sc *sc = device_get_softc(dev);
Remove FDT specific parts from INTRNG. Change its interface to make it universal. (1) New struct intr_map_data is defined as a container for arbitrary description of an interrupt used by a device. Typically, an interrupt number and configuration relevant to an interrupt controller is encoded in such description. However, any additional information may be encoded too like a set of cpus on which an interrupt should be enabled or vendor specific data needed for setup of an interrupt in controller. The struct intr_map_data itself is meant to be opaque for INTRNG. (2) An intr_map_irq() function is created which takes an interrupt controller identification and struct intr_map_data as arguments and returns global interrupt number which identifies an interrupt. (3) A set of functions to be used by bus drivers is created as well as a corresponding set of methods for interrupt controller drivers. These sets take both struct resource and struct intr_map_data as one of the arguments. There is a goal to keep struct intr_map_data in struct resource, however, this way a final solution is not limited to that. (4) Other small changes are done to reflect new situation. This is only first step aiming to create stable interface for interrupt controller drivers. Thus, some temporary solution is taken. Interrupt descriptions for devices are stored in INTRNG and two specific mapping function are created to be temporary used by bus drivers. That's why the struct intr_map_data is not opaque for INTRNG now. This temporary solution will be replaced by final one in next step. Differential Revision: https://reviews.freebsd.org/D5730
2016-04-04 09:15:25 +00:00
return (PIC_BIND_INTR(sc->parent, isrc));
Import basic support for Nvidia Jetson TK1 board and tegra124 SoC. The following pheripherals are supported: UART, MMC, AHCI, EHCI, PCIe, I2C, PMIC, GPIO, CPU temperature and clock. Note: The PCIe driver is pure mash at this moment. It will be reworked immediately when both D5237 and D2579 enter the current tree.
2016-03-16 13:01:48 +00:00
}
#endif
static int
tegra_lic_probe(device_t dev)
{
if (!ofw_bus_status_okay(dev))
return (ENXIO);
if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0)
return (ENXIO);
return (BUS_PROBE_DEFAULT);
}
static int
tegra_lic_attach(device_t dev)
{
struct tegra_lic_sc *sc;
phandle_t node;
phandle_t parent_xref;
int i, rv;
sc = device_get_softc(dev);
sc->dev = dev;
node = ofw_bus_get_node(dev);
rv = OF_getencprop(node, "interrupt-parent", &parent_xref,
sizeof(parent_xref));
if (rv <= 0) {
device_printf(dev, "Cannot read parent node property\n");
goto fail;
}
sc->parent = OF_device_from_xref(parent_xref);
if (sc->parent == NULL) {
device_printf(dev, "Cannott find parent controller\n");
goto fail;
}
if (bus_alloc_resources(dev, lic_spec, sc->mem_res)) {
device_printf(dev, "Cannott allocate resources\n");
goto fail;
}
/* Disable all interrupts, route all to irq */
for (i = 0; i < nitems(lic_spec); i++) {
if (sc->mem_res[i] == NULL)
continue;
WR4(sc, i, LIC_CPU_IER_CLR, 0xFFFFFFFF);
WR4(sc, i, LIC_CPU_IEP_CLASS, 0);
}
Return the struct intr_pic pointer from intr_pic_register. This will be needed in later changes where we may not be able to lock the pic list lock to perform a lookup, e.g. from within interrupt context. Obtained from: ABT Systems Ltd Sponsored by: The FreeBSD Foundation
2016-05-18 15:05:44 +00:00
if (intr_pic_register(dev, OF_xref_from_node(node)) == NULL) {
Import basic support for Nvidia Jetson TK1 board and tegra124 SoC. The following pheripherals are supported: UART, MMC, AHCI, EHCI, PCIe, I2C, PMIC, GPIO, CPU temperature and clock. Note: The PCIe driver is pure mash at this moment. It will be reworked immediately when both D5237 and D2579 enter the current tree.
2016-03-16 13:01:48 +00:00
device_printf(dev, "Cannot register PIC\n");
goto fail;
}
return (0);
fail:
bus_release_resources(dev, lic_spec, sc->mem_res);
return (ENXIO);
}
static int
tegra_lic_detach(device_t dev)
{
struct tegra_lic_sc *sc;
int i;
sc = device_get_softc(dev);
for (i = 0; i < nitems(lic_spec); i++) {
if (sc->mem_res[i] == NULL)
continue;
bus_release_resource(dev, SYS_RES_MEMORY, i,
sc->mem_res[i]);
}
return (0);
}
static device_method_t tegra_lic_methods[] = {
DEVMETHOD(device_probe, tegra_lic_probe),
DEVMETHOD(device_attach, tegra_lic_attach),
DEVMETHOD(device_detach, tegra_lic_detach),
/* Interrupt controller interface */
INTRNG: Rework handling with resources. Partially revert r301453. - Read interrupt properties at bus enumeration time and store it into global mapping table. - At bus_activate_resource() time, given mapping entry is resolved and connected to real interrupt source. A copy of mapping entry is attached to given resource. - At bus_setup_intr() time, mapping entry stored in resource is used for delivery of requested interrupt configuration. - For MSI/MSIX interrupts, mapping entry is created within pci_alloc_msi()/pci_alloc_msix() call. - For legacy PCI interrupts, mapping entry must be created within pcib_route_interrupt() by pcib driver itself. Reviewed by: nwhitehorn, andrew Differential Revision: https://reviews.freebsd.org/D7493
2016-08-19 10:52:39 +00:00
DEVMETHOD(pic_activate_intr, tegra_lic_activate_intr),
Remove FDT specific parts from INTRNG. Change its interface to make it universal. (1) New struct intr_map_data is defined as a container for arbitrary description of an interrupt used by a device. Typically, an interrupt number and configuration relevant to an interrupt controller is encoded in such description. However, any additional information may be encoded too like a set of cpus on which an interrupt should be enabled or vendor specific data needed for setup of an interrupt in controller. The struct intr_map_data itself is meant to be opaque for INTRNG. (2) An intr_map_irq() function is created which takes an interrupt controller identification and struct intr_map_data as arguments and returns global interrupt number which identifies an interrupt. (3) A set of functions to be used by bus drivers is created as well as a corresponding set of methods for interrupt controller drivers. These sets take both struct resource and struct intr_map_data as one of the arguments. There is a goal to keep struct intr_map_data in struct resource, however, this way a final solution is not limited to that. (4) Other small changes are done to reflect new situation. This is only first step aiming to create stable interface for interrupt controller drivers. Thus, some temporary solution is taken. Interrupt descriptions for devices are stored in INTRNG and two specific mapping function are created to be temporary used by bus drivers. That's why the struct intr_map_data is not opaque for INTRNG now. This temporary solution will be replaced by final one in next step. Differential Revision: https://reviews.freebsd.org/D5730
2016-04-04 09:15:25 +00:00
DEVMETHOD(pic_disable_intr, tegra_lic_disable_intr),
Import basic support for Nvidia Jetson TK1 board and tegra124 SoC. The following pheripherals are supported: UART, MMC, AHCI, EHCI, PCIe, I2C, PMIC, GPIO, CPU temperature and clock. Note: The PCIe driver is pure mash at this moment. It will be reworked immediately when both D5237 and D2579 enter the current tree.
2016-03-16 13:01:48 +00:00
DEVMETHOD(pic_enable_intr, tegra_lic_enable_intr),
Remove FDT specific parts from INTRNG. Change its interface to make it universal. (1) New struct intr_map_data is defined as a container for arbitrary description of an interrupt used by a device. Typically, an interrupt number and configuration relevant to an interrupt controller is encoded in such description. However, any additional information may be encoded too like a set of cpus on which an interrupt should be enabled or vendor specific data needed for setup of an interrupt in controller. The struct intr_map_data itself is meant to be opaque for INTRNG. (2) An intr_map_irq() function is created which takes an interrupt controller identification and struct intr_map_data as arguments and returns global interrupt number which identifies an interrupt. (3) A set of functions to be used by bus drivers is created as well as a corresponding set of methods for interrupt controller drivers. These sets take both struct resource and struct intr_map_data as one of the arguments. There is a goal to keep struct intr_map_data in struct resource, however, this way a final solution is not limited to that. (4) Other small changes are done to reflect new situation. This is only first step aiming to create stable interface for interrupt controller drivers. Thus, some temporary solution is taken. Interrupt descriptions for devices are stored in INTRNG and two specific mapping function are created to be temporary used by bus drivers. That's why the struct intr_map_data is not opaque for INTRNG now. This temporary solution will be replaced by final one in next step. Differential Revision: https://reviews.freebsd.org/D5730
2016-04-04 09:15:25 +00:00
DEVMETHOD(pic_map_intr, tegra_lic_map_intr),
INTRNG: Rework handling with resources. Partially revert r301453. - Read interrupt properties at bus enumeration time and store it into global mapping table. - At bus_activate_resource() time, given mapping entry is resolved and connected to real interrupt source. A copy of mapping entry is attached to given resource. - At bus_setup_intr() time, mapping entry stored in resource is used for delivery of requested interrupt configuration. - For MSI/MSIX interrupts, mapping entry is created within pci_alloc_msi()/pci_alloc_msix() call. - For legacy PCI interrupts, mapping entry must be created within pcib_route_interrupt() by pcib driver itself. Reviewed by: nwhitehorn, andrew Differential Revision: https://reviews.freebsd.org/D7493
2016-08-19 10:52:39 +00:00
DEVMETHOD(pic_deactivate_intr, tegra_lic_deactivate_intr),
Remove FDT specific parts from INTRNG. Change its interface to make it universal. (1) New struct intr_map_data is defined as a container for arbitrary description of an interrupt used by a device. Typically, an interrupt number and configuration relevant to an interrupt controller is encoded in such description. However, any additional information may be encoded too like a set of cpus on which an interrupt should be enabled or vendor specific data needed for setup of an interrupt in controller. The struct intr_map_data itself is meant to be opaque for INTRNG. (2) An intr_map_irq() function is created which takes an interrupt controller identification and struct intr_map_data as arguments and returns global interrupt number which identifies an interrupt. (3) A set of functions to be used by bus drivers is created as well as a corresponding set of methods for interrupt controller drivers. These sets take both struct resource and struct intr_map_data as one of the arguments. There is a goal to keep struct intr_map_data in struct resource, however, this way a final solution is not limited to that. (4) Other small changes are done to reflect new situation. This is only first step aiming to create stable interface for interrupt controller drivers. Thus, some temporary solution is taken. Interrupt descriptions for devices are stored in INTRNG and two specific mapping function are created to be temporary used by bus drivers. That's why the struct intr_map_data is not opaque for INTRNG now. This temporary solution will be replaced by final one in next step. Differential Revision: https://reviews.freebsd.org/D5730
2016-04-04 09:15:25 +00:00
DEVMETHOD(pic_setup_intr, tegra_lic_setup_intr),
DEVMETHOD(pic_teardown_intr, tegra_lic_teardown_intr),
Import basic support for Nvidia Jetson TK1 board and tegra124 SoC. The following pheripherals are supported: UART, MMC, AHCI, EHCI, PCIe, I2C, PMIC, GPIO, CPU temperature and clock. Note: The PCIe driver is pure mash at this moment. It will be reworked immediately when both D5237 and D2579 enter the current tree.
2016-03-16 13:01:48 +00:00
DEVMETHOD(pic_pre_ithread, tegra_lic_pre_ithread),
DEVMETHOD(pic_post_ithread, tegra_lic_post_ithread),
DEVMETHOD(pic_post_filter, tegra_lic_post_filter),
#ifdef SMP
Remove FDT specific parts from INTRNG. Change its interface to make it universal. (1) New struct intr_map_data is defined as a container for arbitrary description of an interrupt used by a device. Typically, an interrupt number and configuration relevant to an interrupt controller is encoded in such description. However, any additional information may be encoded too like a set of cpus on which an interrupt should be enabled or vendor specific data needed for setup of an interrupt in controller. The struct intr_map_data itself is meant to be opaque for INTRNG. (2) An intr_map_irq() function is created which takes an interrupt controller identification and struct intr_map_data as arguments and returns global interrupt number which identifies an interrupt. (3) A set of functions to be used by bus drivers is created as well as a corresponding set of methods for interrupt controller drivers. These sets take both struct resource and struct intr_map_data as one of the arguments. There is a goal to keep struct intr_map_data in struct resource, however, this way a final solution is not limited to that. (4) Other small changes are done to reflect new situation. This is only first step aiming to create stable interface for interrupt controller drivers. Thus, some temporary solution is taken. Interrupt descriptions for devices are stored in INTRNG and two specific mapping function are created to be temporary used by bus drivers. That's why the struct intr_map_data is not opaque for INTRNG now. This temporary solution will be replaced by final one in next step. Differential Revision: https://reviews.freebsd.org/D5730
2016-04-04 09:15:25 +00:00
DEVMETHOD(pic_bind_intr, tegra_lic_bind_intr),
Import basic support for Nvidia Jetson TK1 board and tegra124 SoC. The following pheripherals are supported: UART, MMC, AHCI, EHCI, PCIe, I2C, PMIC, GPIO, CPU temperature and clock. Note: The PCIe driver is pure mash at this moment. It will be reworked immediately when both D5237 and D2579 enter the current tree.
2016-03-16 13:01:48 +00:00
#endif
DEVMETHOD_END
};
TEGRA: Prepare Tegra subtree for inclusion into ARM generic kernel. - use DEFINE_CLASS_0() for driver classes - unify driver names - cleanup driver definitions and bindings
2016-09-30 05:25:15 +00:00
Import basic support for Nvidia Jetson TK1 board and tegra124 SoC. The following pheripherals are supported: UART, MMC, AHCI, EHCI, PCIe, I2C, PMIC, GPIO, CPU temperature and clock. Note: The PCIe driver is pure mash at this moment. It will be reworked immediately when both D5237 and D2579 enter the current tree.
2016-03-16 13:01:48 +00:00
devclass_t tegra_lic_devclass;
TEGRA: Prepare Tegra subtree for inclusion into ARM generic kernel. - use DEFINE_CLASS_0() for driver classes - unify driver names - cleanup driver definitions and bindings
2016-09-30 05:25:15 +00:00
static DEFINE_CLASS_0(lic, tegra_lic_driver, tegra_lic_methods,
Import basic support for Nvidia Jetson TK1 board and tegra124 SoC. The following pheripherals are supported: UART, MMC, AHCI, EHCI, PCIe, I2C, PMIC, GPIO, CPU temperature and clock. Note: The PCIe driver is pure mash at this moment. It will be reworked immediately when both D5237 and D2579 enter the current tree.
2016-03-16 13:01:48 +00:00
sizeof(struct tegra_lic_sc));
EARLY_DRIVER_MODULE(tegra_lic, simplebus, tegra_lic_driver, tegra_lic_devclass,
NULL, NULL, BUS_PASS_INTERRUPT + BUS_PASS_ORDER_MIDDLE + 1);
Reference in New Issue Copy Permalink