More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
following improvements:
o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
quirk. This allows drivers to specify busy waiting only for
certain transfers (namely control transfers for reading/writing
registers and stuff).
o New USBD_FORCE_SHORT_XFER flag can be used to deal with
devices like the ADMtek Pegasus that sense the end of bulk OUT
transfers in a special way (if a transfer is exactly a multiple
of 64 bytes in size, you need to send an extra empty packet
to terminate the transfer).
o usbd_open_pipe_intr() now accepts an interval argument which
can be used to change the rate at which the interrupt callback
routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
value specified in the device's config data, but drivers can
override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
control transfers. We no longer force the non-tsleep hack for
bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
when a device has been detached, and use this flag to perform
tests to prevent the drivers from trying to do control transfers
if this is the case. This is necessary because calling if_detach()
with INET6 enabled will eventually result in a call to the driver's
ioctl() routine to delete the multicast groups on the interface,
which will result in attempts to perform control transfers. (It's
possible this also happens even without INET6 support enabled.) This
is pointless since we know that if the detach method has been called,
the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
to initialize the device states without trying to close and re-open the
pipes. This is partly because we don't want to frob things at interrupt
context, but also because this doesn't seem to work right and I don't
want to panic the system just because a USB device may have stopped
responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
transfer is needed. Unfortunately, the design of the chip makes it hard
to get this exactly right. Hopefully, this will go away once either
Nick or Lennart finds the bug in the uhci driver that makes this ugly
hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
|
|
|
/* $NetBSD: uhcivar.h,v 1.21 2000/01/18 20:11:01 augustss Exp $ */
|
1999-11-17 22:33:51 +00:00
|
|
|
/* $FreeBSD$ */
|
1998-11-26 23:13:13 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Copyright (c) 1998 The NetBSD Foundation, Inc.
|
|
|
|
* All rights reserved.
|
|
|
|
*
|
1999-01-07 23:07:57 +00:00
|
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
2000-05-14 16:43:10 +00:00
|
|
|
* by Lennart Augustsson (lennart@augustsson.net) at
|
1999-01-07 23:07:57 +00:00
|
|
|
* Carlstedt Research & Technology.
|
1998-11-26 23:13:13 +00:00
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
|
|
* must display the following acknowledgement:
|
|
|
|
* This product includes software developed by the NetBSD
|
|
|
|
* Foundation, Inc. and its contributors.
|
|
|
|
* 4. Neither the name of The NetBSD Foundation nor the names of its
|
|
|
|
* contributors may be used to endorse or promote products derived
|
|
|
|
* from this software without specific prior written permission.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* To avoid having 1024 TDs for each isochronous transfer we introduce
|
1999-10-07 19:26:38 +00:00
|
|
|
* a virtual frame list. Every UHCI_VFRAMELIST_COUNT entries in the real
|
|
|
|
* frame list points to a non-active TD. These, in turn, which form the
|
|
|
|
* starts of the virtual frame list. This also has the advantage that it
|
|
|
|
* simplifies linking in/out TD/QH in the schedule.
|
|
|
|
* Furthermore, initially each of the inactive TDs point to an inactive
|
|
|
|
* QH that forms the start of the interrupt traffic for that slot.
|
|
|
|
* Each of these QHs point to the same QH that is the start of control
|
|
|
|
* traffic.
|
1998-11-26 23:13:13 +00:00
|
|
|
*
|
1999-10-07 19:26:38 +00:00
|
|
|
* UHCI_VFRAMELIST_COUNT should be a power of 2 and <= UHCI_FRAMELIST_COUNT.
|
1998-11-26 23:13:13 +00:00
|
|
|
*/
|
|
|
|
#define UHCI_VFRAMELIST_COUNT 128
|
|
|
|
|
|
|
|
typedef struct uhci_soft_qh uhci_soft_qh_t;
|
|
|
|
typedef struct uhci_soft_td uhci_soft_td_t;
|
|
|
|
|
1999-10-07 19:26:38 +00:00
|
|
|
typedef union {
|
|
|
|
struct uhci_soft_qh *sqh;
|
|
|
|
struct uhci_soft_td *std;
|
|
|
|
} uhci_soft_td_qh_t;
|
|
|
|
|
1998-11-26 23:13:13 +00:00
|
|
|
/*
|
|
|
|
* An interrupt info struct contains the information needed to
|
|
|
|
* execute a requested routine when the controller generates an
|
|
|
|
* interrupt. Since we cannot know which transfer generated
|
|
|
|
* the interrupt all structs are linked together so they can be
|
|
|
|
* searched at interrupt time.
|
|
|
|
*/
|
|
|
|
typedef struct uhci_intr_info {
|
|
|
|
struct uhci_softc *sc;
|
1999-11-17 22:33:51 +00:00
|
|
|
usbd_xfer_handle xfer;
|
1998-11-26 23:13:13 +00:00
|
|
|
uhci_soft_td_t *stdstart;
|
|
|
|
uhci_soft_td_t *stdend;
|
2000-05-26 02:09:24 +00:00
|
|
|
LIST_ENTRY(uhci_intr_info) list;
|
1999-01-07 23:07:57 +00:00
|
|
|
#if defined(__FreeBSD__)
|
|
|
|
struct callout_handle timeout_handle;
|
|
|
|
#endif /* defined(__FreeBSD__) */
|
1998-11-26 23:13:13 +00:00
|
|
|
#ifdef DIAGNOSTIC
|
|
|
|
int isdone;
|
|
|
|
#endif
|
|
|
|
} uhci_intr_info_t;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Extra information that we need for a TD.
|
|
|
|
*/
|
|
|
|
struct uhci_soft_td {
|
1999-10-07 19:26:38 +00:00
|
|
|
uhci_td_t td; /* The real TD, must be first */
|
|
|
|
uhci_soft_td_qh_t link; /* soft version of the td_link field */
|
|
|
|
uhci_physaddr_t physaddr; /* TD's physical address. */
|
1998-11-26 23:13:13 +00:00
|
|
|
};
|
1999-10-07 19:26:38 +00:00
|
|
|
/*
|
|
|
|
* Make the size such that it is a multiple of UHCI_TD_ALIGN. This way
|
More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
following improvements:
o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
quirk. This allows drivers to specify busy waiting only for
certain transfers (namely control transfers for reading/writing
registers and stuff).
o New USBD_FORCE_SHORT_XFER flag can be used to deal with
devices like the ADMtek Pegasus that sense the end of bulk OUT
transfers in a special way (if a transfer is exactly a multiple
of 64 bytes in size, you need to send an extra empty packet
to terminate the transfer).
o usbd_open_pipe_intr() now accepts an interval argument which
can be used to change the rate at which the interrupt callback
routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
value specified in the device's config data, but drivers can
override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
control transfers. We no longer force the non-tsleep hack for
bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
when a device has been detached, and use this flag to perform
tests to prevent the drivers from trying to do control transfers
if this is the case. This is necessary because calling if_detach()
with INET6 enabled will eventually result in a call to the driver's
ioctl() routine to delete the multicast groups on the interface,
which will result in attempts to perform control transfers. (It's
possible this also happens even without INET6 support enabled.) This
is pointless since we know that if the detach method has been called,
the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
to initialize the device states without trying to close and re-open the
pipes. This is partly because we don't want to frob things at interrupt
context, but also because this doesn't seem to work right and I don't
want to panic the system just because a USB device may have stopped
responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
transfer is needed. Unfortunately, the design of the chip makes it hard
to get this exactly right. Hopefully, this will go away once either
Nick or Lennart finds the bug in the uhci driver that makes this ugly
hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
|
|
|
* we can pack a number of soft TD together and have the real TD well
|
1999-10-07 19:26:38 +00:00
|
|
|
* aligned.
|
|
|
|
* NOTE: Minimum size is 32 bytes.
|
|
|
|
*/
|
|
|
|
#define UHCI_STD_SIZE ((sizeof (struct uhci_soft_td) + UHCI_TD_ALIGN - 1) / UHCI_TD_ALIGN * UHCI_TD_ALIGN)
|
|
|
|
#define UHCI_STD_CHUNK 128 /*(PAGE_SIZE / UHCI_TD_SIZE)*/
|
1998-11-26 23:13:13 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Extra information that we need for a QH.
|
|
|
|
*/
|
|
|
|
struct uhci_soft_qh {
|
1999-10-07 19:26:38 +00:00
|
|
|
uhci_qh_t qh; /* The real QH, must be first */
|
|
|
|
uhci_soft_qh_t *hlink; /* soft version of qh_hlink */
|
|
|
|
uhci_soft_td_t *elink; /* soft version of qh_elink */
|
|
|
|
uhci_physaddr_t physaddr; /* QH's physical address. */
|
1998-11-26 23:13:13 +00:00
|
|
|
int pos; /* Timeslot position */
|
|
|
|
uhci_intr_info_t *intr_info; /* Who to call on completion. */
|
1999-10-07 19:26:38 +00:00
|
|
|
/* XXX should try to shrink with 4 bytes to fit into 32 bytes */
|
1998-11-26 23:13:13 +00:00
|
|
|
};
|
1999-10-07 19:26:38 +00:00
|
|
|
/* See comment about UHCI_STD_SIZE. */
|
|
|
|
#define UHCI_SQH_SIZE ((sizeof (struct uhci_soft_qh) + UHCI_QH_ALIGN - 1) / UHCI_QH_ALIGN * UHCI_QH_ALIGN)
|
|
|
|
#define UHCI_SQH_CHUNK 128 /*(PAGE_SIZE / UHCI_QH_SIZE)*/
|
1998-11-26 23:13:13 +00:00
|
|
|
|
|
|
|
/*
|
More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
following improvements:
o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
quirk. This allows drivers to specify busy waiting only for
certain transfers (namely control transfers for reading/writing
registers and stuff).
o New USBD_FORCE_SHORT_XFER flag can be used to deal with
devices like the ADMtek Pegasus that sense the end of bulk OUT
transfers in a special way (if a transfer is exactly a multiple
of 64 bytes in size, you need to send an extra empty packet
to terminate the transfer).
o usbd_open_pipe_intr() now accepts an interval argument which
can be used to change the rate at which the interrupt callback
routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
value specified in the device's config data, but drivers can
override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
control transfers. We no longer force the non-tsleep hack for
bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
when a device has been detached, and use this flag to perform
tests to prevent the drivers from trying to do control transfers
if this is the case. This is necessary because calling if_detach()
with INET6 enabled will eventually result in a call to the driver's
ioctl() routine to delete the multicast groups on the interface,
which will result in attempts to perform control transfers. (It's
possible this also happens even without INET6 support enabled.) This
is pointless since we know that if the detach method has been called,
the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
to initialize the device states without trying to close and re-open the
pipes. This is partly because we don't want to frob things at interrupt
context, but also because this doesn't seem to work right and I don't
want to panic the system just because a USB device may have stopped
responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
transfer is needed. Unfortunately, the design of the chip makes it hard
to get this exactly right. Hopefully, this will go away once either
Nick or Lennart finds the bug in the uhci driver that makes this ugly
hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
|
|
|
* Information about an entry in the virtual frame list.
|
1998-11-26 23:13:13 +00:00
|
|
|
*/
|
|
|
|
struct uhci_vframe {
|
|
|
|
uhci_soft_td_t *htd; /* pointer to dummy TD */
|
|
|
|
uhci_soft_td_t *etd; /* pointer to last TD */
|
|
|
|
uhci_soft_qh_t *hqh; /* pointer to dummy QH */
|
|
|
|
uhci_soft_qh_t *eqh; /* pointer to last QH */
|
|
|
|
u_int bandwidth; /* max bandwidth used by this frame */
|
|
|
|
};
|
|
|
|
|
|
|
|
typedef struct uhci_softc {
|
|
|
|
struct usbd_bus sc_bus; /* base device */
|
|
|
|
bus_space_tag_t iot;
|
|
|
|
bus_space_handle_t ioh;
|
2000-05-07 20:17:30 +00:00
|
|
|
#if defined(__FreeBSD__)
|
|
|
|
void *ih;
|
|
|
|
|
|
|
|
struct resource *io_res;
|
|
|
|
struct resource *irq_res;
|
|
|
|
#endif
|
1998-11-26 23:13:13 +00:00
|
|
|
|
|
|
|
uhci_physaddr_t *sc_pframes;
|
1999-10-07 19:26:38 +00:00
|
|
|
usb_dma_t sc_dma;
|
1998-11-26 23:13:13 +00:00
|
|
|
struct uhci_vframe sc_vframes[UHCI_VFRAMELIST_COUNT];
|
|
|
|
|
|
|
|
uhci_soft_qh_t *sc_ctl_start; /* dummy QH for control */
|
|
|
|
uhci_soft_qh_t *sc_ctl_end; /* last control QH */
|
|
|
|
uhci_soft_qh_t *sc_bulk_start; /* dummy QH for bulk */
|
|
|
|
uhci_soft_qh_t *sc_bulk_end; /* last bulk transfer */
|
|
|
|
|
More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
following improvements:
o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
quirk. This allows drivers to specify busy waiting only for
certain transfers (namely control transfers for reading/writing
registers and stuff).
o New USBD_FORCE_SHORT_XFER flag can be used to deal with
devices like the ADMtek Pegasus that sense the end of bulk OUT
transfers in a special way (if a transfer is exactly a multiple
of 64 bytes in size, you need to send an extra empty packet
to terminate the transfer).
o usbd_open_pipe_intr() now accepts an interval argument which
can be used to change the rate at which the interrupt callback
routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
value specified in the device's config data, but drivers can
override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
control transfers. We no longer force the non-tsleep hack for
bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
when a device has been detached, and use this flag to perform
tests to prevent the drivers from trying to do control transfers
if this is the case. This is necessary because calling if_detach()
with INET6 enabled will eventually result in a call to the driver's
ioctl() routine to delete the multicast groups on the interface,
which will result in attempts to perform control transfers. (It's
possible this also happens even without INET6 support enabled.) This
is pointless since we know that if the detach method has been called,
the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
to initialize the device states without trying to close and re-open the
pipes. This is partly because we don't want to frob things at interrupt
context, but also because this doesn't seem to work right and I don't
want to panic the system just because a USB device may have stopped
responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
transfer is needed. Unfortunately, the design of the chip makes it hard
to get this exactly right. Hopefully, this will go away once either
Nick or Lennart finds the bug in the uhci driver that makes this ugly
hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
|
|
|
uhci_soft_td_t *sc_freetds; /* TD free list */
|
|
|
|
uhci_soft_qh_t *sc_freeqhs; /* QH free list */
|
|
|
|
|
2000-05-26 02:09:24 +00:00
|
|
|
SIMPLEQ_HEAD(, usbd_xfer) sc_free_xfers; /* free xfers */
|
1998-11-26 23:13:13 +00:00
|
|
|
|
|
|
|
u_int8_t sc_addr; /* device address */
|
|
|
|
u_int8_t sc_conf; /* device configuration */
|
|
|
|
|
2000-08-07 00:04:53 +00:00
|
|
|
u_int8_t sc_saved_sof;
|
|
|
|
u_int16_t sc_saved_frnum;
|
|
|
|
|
1998-11-26 23:13:13 +00:00
|
|
|
char sc_isreset;
|
1999-10-07 19:26:38 +00:00
|
|
|
char sc_suspend;
|
|
|
|
|
2000-05-26 02:09:24 +00:00
|
|
|
LIST_HEAD(, uhci_intr_info) sc_intrhead;
|
1998-11-26 23:13:13 +00:00
|
|
|
|
|
|
|
/* Info for the root hub interrupt channel. */
|
More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
following improvements:
o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
quirk. This allows drivers to specify busy waiting only for
certain transfers (namely control transfers for reading/writing
registers and stuff).
o New USBD_FORCE_SHORT_XFER flag can be used to deal with
devices like the ADMtek Pegasus that sense the end of bulk OUT
transfers in a special way (if a transfer is exactly a multiple
of 64 bytes in size, you need to send an extra empty packet
to terminate the transfer).
o usbd_open_pipe_intr() now accepts an interval argument which
can be used to change the rate at which the interrupt callback
routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
value specified in the device's config data, but drivers can
override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
control transfers. We no longer force the non-tsleep hack for
bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
when a device has been detached, and use this flag to perform
tests to prevent the drivers from trying to do control transfers
if this is the case. This is necessary because calling if_detach()
with INET6 enabled will eventually result in a call to the driver's
ioctl() routine to delete the multicast groups on the interface,
which will result in attempts to perform control transfers. (It's
possible this also happens even without INET6 support enabled.) This
is pointless since we know that if the detach method has been called,
the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
to initialize the device states without trying to close and re-open the
pipes. This is partly because we don't want to frob things at interrupt
context, but also because this doesn't seem to work right and I don't
want to panic the system just because a USB device may have stopped
responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
transfer is needed. Unfortunately, the design of the chip makes it hard
to get this exactly right. Hopefully, this will go away once either
Nick or Lennart finds the bug in the uhci driver that makes this ugly
hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
|
|
|
int sc_ival; /* time between root hug intrs */
|
|
|
|
usbd_xfer_handle sc_has_timo; /* root hub interrupt transfer */
|
1998-11-26 23:13:13 +00:00
|
|
|
|
More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
following improvements:
o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
quirk. This allows drivers to specify busy waiting only for
certain transfers (namely control transfers for reading/writing
registers and stuff).
o New USBD_FORCE_SHORT_XFER flag can be used to deal with
devices like the ADMtek Pegasus that sense the end of bulk OUT
transfers in a special way (if a transfer is exactly a multiple
of 64 bytes in size, you need to send an extra empty packet
to terminate the transfer).
o usbd_open_pipe_intr() now accepts an interval argument which
can be used to change the rate at which the interrupt callback
routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
value specified in the device's config data, but drivers can
override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
control transfers. We no longer force the non-tsleep hack for
bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
when a device has been detached, and use this flag to perform
tests to prevent the drivers from trying to do control transfers
if this is the case. This is necessary because calling if_detach()
with INET6 enabled will eventually result in a call to the driver's
ioctl() routine to delete the multicast groups on the interface,
which will result in attempts to perform control transfers. (It's
possible this also happens even without INET6 support enabled.) This
is pointless since we know that if the detach method has been called,
the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
to initialize the device states without trying to close and re-open the
pipes. This is partly because we don't want to frob things at interrupt
context, but also because this doesn't seem to work right and I don't
want to panic the system just because a USB device may have stopped
responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
transfer is needed. Unfortunately, the design of the chip makes it hard
to get this exactly right. Hopefully, this will go away once either
Nick or Lennart finds the bug in the uhci driver that makes this ugly
hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
|
|
|
char sc_vflock; /* for lock virtual frame list */
|
1998-11-26 23:13:13 +00:00
|
|
|
#define UHCI_HAS_LOCK 1
|
|
|
|
#define UHCI_WANT_LOCK 2
|
|
|
|
|
More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
following improvements:
o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
quirk. This allows drivers to specify busy waiting only for
certain transfers (namely control transfers for reading/writing
registers and stuff).
o New USBD_FORCE_SHORT_XFER flag can be used to deal with
devices like the ADMtek Pegasus that sense the end of bulk OUT
transfers in a special way (if a transfer is exactly a multiple
of 64 bytes in size, you need to send an extra empty packet
to terminate the transfer).
o usbd_open_pipe_intr() now accepts an interval argument which
can be used to change the rate at which the interrupt callback
routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
value specified in the device's config data, but drivers can
override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
control transfers. We no longer force the non-tsleep hack for
bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
when a device has been detached, and use this flag to perform
tests to prevent the drivers from trying to do control transfers
if this is the case. This is necessary because calling if_detach()
with INET6 enabled will eventually result in a call to the driver's
ioctl() routine to delete the multicast groups on the interface,
which will result in attempts to perform control transfers. (It's
possible this also happens even without INET6 support enabled.) This
is pointless since we know that if the detach method has been called,
the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
to initialize the device states without trying to close and re-open the
pipes. This is partly because we don't want to frob things at interrupt
context, but also because this doesn't seem to work right and I don't
want to panic the system just because a USB device may have stopped
responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
transfer is needed. Unfortunately, the design of the chip makes it hard
to get this exactly right. Hopefully, this will go away once either
Nick or Lennart finds the bug in the uhci driver that makes this ugly
hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
|
|
|
char sc_vendor[16]; /* vendor string for root hub */
|
|
|
|
int sc_id_vendor; /* vendor ID for root hub */
|
|
|
|
|
2000-03-18 14:54:54 +00:00
|
|
|
#if defined(__NetBSD__)
|
More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
following improvements:
o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
quirk. This allows drivers to specify busy waiting only for
certain transfers (namely control transfers for reading/writing
registers and stuff).
o New USBD_FORCE_SHORT_XFER flag can be used to deal with
devices like the ADMtek Pegasus that sense the end of bulk OUT
transfers in a special way (if a transfer is exactly a multiple
of 64 bytes in size, you need to send an extra empty packet
to terminate the transfer).
o usbd_open_pipe_intr() now accepts an interval argument which
can be used to change the rate at which the interrupt callback
routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
value specified in the device's config data, but drivers can
override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
control transfers. We no longer force the non-tsleep hack for
bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
when a device has been detached, and use this flag to perform
tests to prevent the drivers from trying to do control transfers
if this is the case. This is necessary because calling if_detach()
with INET6 enabled will eventually result in a call to the driver's
ioctl() routine to delete the multicast groups on the interface,
which will result in attempts to perform control transfers. (It's
possible this also happens even without INET6 support enabled.) This
is pointless since we know that if the detach method has been called,
the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
to initialize the device states without trying to close and re-open the
pipes. This is partly because we don't want to frob things at interrupt
context, but also because this doesn't seem to work right and I don't
want to panic the system just because a USB device may have stopped
responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
transfer is needed. Unfortunately, the design of the chip makes it hard
to get this exactly right. Hopefully, this will go away once either
Nick or Lennart finds the bug in the uhci driver that makes this ugly
hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
|
|
|
void *sc_powerhook; /* cookie from power hook */
|
|
|
|
void *sc_shutdownhook; /* cookie from shutdown hook */
|
2000-03-15 22:15:21 +00:00
|
|
|
#endif
|
1999-11-17 22:33:51 +00:00
|
|
|
|
More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
following improvements:
o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
quirk. This allows drivers to specify busy waiting only for
certain transfers (namely control transfers for reading/writing
registers and stuff).
o New USBD_FORCE_SHORT_XFER flag can be used to deal with
devices like the ADMtek Pegasus that sense the end of bulk OUT
transfers in a special way (if a transfer is exactly a multiple
of 64 bytes in size, you need to send an extra empty packet
to terminate the transfer).
o usbd_open_pipe_intr() now accepts an interval argument which
can be used to change the rate at which the interrupt callback
routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
value specified in the device's config data, but drivers can
override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
control transfers. We no longer force the non-tsleep hack for
bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
when a device has been detached, and use this flag to perform
tests to prevent the drivers from trying to do control transfers
if this is the case. This is necessary because calling if_detach()
with INET6 enabled will eventually result in a call to the driver's
ioctl() routine to delete the multicast groups on the interface,
which will result in attempts to perform control transfers. (It's
possible this also happens even without INET6 support enabled.) This
is pointless since we know that if the detach method has been called,
the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
to initialize the device states without trying to close and re-open the
pipes. This is partly because we don't want to frob things at interrupt
context, but also because this doesn't seem to work right and I don't
want to panic the system just because a USB device may have stopped
responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
transfer is needed. Unfortunately, the design of the chip makes it hard
to get this exactly right. Hopefully, this will go away once either
Nick or Lennart finds the bug in the uhci driver that makes this ugly
hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
|
|
|
device_ptr_t sc_child; /* /dev/usb device */
|
1998-11-26 23:13:13 +00:00
|
|
|
} uhci_softc_t;
|
|
|
|
|
2000-07-17 18:41:20 +00:00
|
|
|
usbd_status uhci_init(uhci_softc_t *);
|
|
|
|
int uhci_intr(void *);
|
1999-11-17 22:33:51 +00:00
|
|
|
#if defined(__NetBSD__) || defined(__OpenBSD__)
|
2000-07-17 18:41:20 +00:00
|
|
|
int uhci_detach(uhci_softc_t *, int);
|
|
|
|
int uhci_activate(device_ptr_t, enum devact);
|
1999-10-07 19:26:38 +00:00
|
|
|
#endif
|
|
|
|
|
2000-07-17 18:41:20 +00:00
|
|
|
void uhci_shutdown(void *v);
|
|
|
|
void uhci_power(int state, void *priv);
|
2000-01-20 22:24:35 +00:00
|
|
|
|