freebsd-dev/sys/dev/nvme/nvme_qpair.c

994 lines
27 KiB
C
Raw Normal View History

This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
/*-
* Copyright (C) 2012 Intel Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/bus.h>
#include <dev/pci/pcivar.h>
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
#include "nvme_private.h"
static void _nvme_qpair_submit_request(struct nvme_qpair *qpair,
struct nvme_request *req);
struct nvme_opcode_string {
uint16_t opc;
const char * str;
};
static struct nvme_opcode_string admin_opcode[] = {
{ NVME_OPC_DELETE_IO_SQ, "DELETE IO SQ" },
{ NVME_OPC_CREATE_IO_SQ, "CREATE IO SQ" },
{ NVME_OPC_GET_LOG_PAGE, "GET LOG PAGE" },
{ NVME_OPC_DELETE_IO_CQ, "DELETE IO CQ" },
{ NVME_OPC_CREATE_IO_CQ, "CREATE IO CQ" },
{ NVME_OPC_IDENTIFY, "IDENTIFY" },
{ NVME_OPC_ABORT, "ABORT" },
{ NVME_OPC_SET_FEATURES, "SET FEATURES" },
{ NVME_OPC_GET_FEATURES, "GET FEATURES" },
{ NVME_OPC_ASYNC_EVENT_REQUEST, "ASYNC EVENT REQUEST" },
{ NVME_OPC_FIRMWARE_ACTIVATE, "FIRMWARE ACTIVATE" },
{ NVME_OPC_FIRMWARE_IMAGE_DOWNLOAD, "FIRMWARE IMAGE DOWNLOAD" },
{ NVME_OPC_FORMAT_NVM, "FORMAT NVM" },
{ NVME_OPC_SECURITY_SEND, "SECURITY SEND" },
{ NVME_OPC_SECURITY_RECEIVE, "SECURITY RECEIVE" },
{ 0xFFFF, "ADMIN COMMAND" }
};
static struct nvme_opcode_string io_opcode[] = {
{ NVME_OPC_FLUSH, "FLUSH" },
{ NVME_OPC_WRITE, "WRITE" },
{ NVME_OPC_READ, "READ" },
{ NVME_OPC_WRITE_UNCORRECTABLE, "WRITE UNCORRECTABLE" },
{ NVME_OPC_COMPARE, "COMPARE" },
{ NVME_OPC_DATASET_MANAGEMENT, "DATASET MANAGEMENT" },
{ 0xFFFF, "IO COMMAND" }
};
static const char *
get_admin_opcode_string(uint16_t opc)
{
struct nvme_opcode_string *entry;
entry = admin_opcode;
while (entry->opc != 0xFFFF) {
if (entry->opc == opc)
return (entry->str);
entry++;
}
return (entry->str);
}
static const char *
get_io_opcode_string(uint16_t opc)
{
struct nvme_opcode_string *entry;
entry = io_opcode;
while (entry->opc != 0xFFFF) {
if (entry->opc == opc)
return (entry->str);
entry++;
}
return (entry->str);
}
static void
nvme_admin_qpair_print_command(struct nvme_qpair *qpair,
struct nvme_command *cmd)
{
nvme_printf(qpair->ctrlr, "%s (%02x) sqid:%d cid:%d nsid:%x "
"cdw10:%08x cdw11:%08x\n",
get_admin_opcode_string(cmd->opc), cmd->opc, qpair->id, cmd->cid,
cmd->nsid, cmd->cdw10, cmd->cdw11);
}
static void
nvme_io_qpair_print_command(struct nvme_qpair *qpair,
struct nvme_command *cmd)
{
switch (cmd->opc) {
case NVME_OPC_WRITE:
case NVME_OPC_READ:
case NVME_OPC_WRITE_UNCORRECTABLE:
case NVME_OPC_COMPARE:
nvme_printf(qpair->ctrlr, "%s sqid:%d cid:%d nsid:%d "
"lba:%llu len:%d\n",
get_io_opcode_string(cmd->opc), qpair->id, cmd->cid,
cmd->nsid,
((unsigned long long)cmd->cdw11 << 32) + cmd->cdw10,
(cmd->cdw12 & 0xFFFF) + 1);
break;
case NVME_OPC_FLUSH:
case NVME_OPC_DATASET_MANAGEMENT:
nvme_printf(qpair->ctrlr, "%s sqid:%d cid:%d nsid:%d\n",
get_io_opcode_string(cmd->opc), qpair->id, cmd->cid,
cmd->nsid);
break;
default:
nvme_printf(qpair->ctrlr, "%s (%02x) sqid:%d cid:%d nsid:%d\n",
get_io_opcode_string(cmd->opc), cmd->opc, qpair->id,
cmd->cid, cmd->nsid);
break;
}
}
static void
nvme_qpair_print_command(struct nvme_qpair *qpair, struct nvme_command *cmd)
{
if (qpair->id == 0)
nvme_admin_qpair_print_command(qpair, cmd);
else
nvme_io_qpair_print_command(qpair, cmd);
}
struct nvme_status_string {
uint16_t sc;
const char * str;
};
static struct nvme_status_string generic_status[] = {
{ NVME_SC_SUCCESS, "SUCCESS" },
{ NVME_SC_INVALID_OPCODE, "INVALID OPCODE" },
{ NVME_SC_INVALID_FIELD, "INVALID_FIELD" },
{ NVME_SC_COMMAND_ID_CONFLICT, "COMMAND ID CONFLICT" },
{ NVME_SC_DATA_TRANSFER_ERROR, "DATA TRANSFER ERROR" },
{ NVME_SC_ABORTED_POWER_LOSS, "ABORTED - POWER LOSS" },
{ NVME_SC_INTERNAL_DEVICE_ERROR, "INTERNAL DEVICE ERROR" },
{ NVME_SC_ABORTED_BY_REQUEST, "ABORTED - BY REQUEST" },
{ NVME_SC_ABORTED_SQ_DELETION, "ABORTED - SQ DELETION" },
{ NVME_SC_ABORTED_FAILED_FUSED, "ABORTED - FAILED FUSED" },
{ NVME_SC_ABORTED_MISSING_FUSED, "ABORTED - MISSING FUSED" },
{ NVME_SC_INVALID_NAMESPACE_OR_FORMAT, "INVALID NAMESPACE OR FORMAT" },
{ NVME_SC_COMMAND_SEQUENCE_ERROR, "COMMAND SEQUENCE ERROR" },
{ NVME_SC_LBA_OUT_OF_RANGE, "LBA OUT OF RANGE" },
{ NVME_SC_CAPACITY_EXCEEDED, "CAPACITY EXCEEDED" },
{ NVME_SC_NAMESPACE_NOT_READY, "NAMESPACE NOT READY" },
{ 0xFFFF, "GENERIC" }
};
static struct nvme_status_string command_specific_status[] = {
{ NVME_SC_COMPLETION_QUEUE_INVALID, "INVALID COMPLETION QUEUE" },
{ NVME_SC_INVALID_QUEUE_IDENTIFIER, "INVALID QUEUE IDENTIFIER" },
{ NVME_SC_MAXIMUM_QUEUE_SIZE_EXCEEDED, "MAX QUEUE SIZE EXCEEDED" },
{ NVME_SC_ABORT_COMMAND_LIMIT_EXCEEDED, "ABORT CMD LIMIT EXCEEDED" },
{ NVME_SC_ASYNC_EVENT_REQUEST_LIMIT_EXCEEDED, "ASYNC LIMIT EXCEEDED" },
{ NVME_SC_INVALID_FIRMWARE_SLOT, "INVALID FIRMWARE SLOT" },
{ NVME_SC_INVALID_FIRMWARE_IMAGE, "INVALID FIRMWARE IMAGE" },
{ NVME_SC_INVALID_INTERRUPT_VECTOR, "INVALID INTERRUPT VECTOR" },
{ NVME_SC_INVALID_LOG_PAGE, "INVALID LOG PAGE" },
{ NVME_SC_INVALID_FORMAT, "INVALID FORMAT" },
{ NVME_SC_FIRMWARE_REQUIRES_RESET, "FIRMWARE REQUIRES RESET" },
{ NVME_SC_CONFLICTING_ATTRIBUTES, "CONFLICTING ATTRIBUTES" },
{ NVME_SC_INVALID_PROTECTION_INFO, "INVALID PROTECTION INFO" },
{ NVME_SC_ATTEMPTED_WRITE_TO_RO_PAGE, "WRITE TO RO PAGE" },
{ 0xFFFF, "COMMAND SPECIFIC" }
};
static struct nvme_status_string media_error_status[] = {
{ NVME_SC_WRITE_FAULTS, "WRITE FAULTS" },
{ NVME_SC_UNRECOVERED_READ_ERROR, "UNRECOVERED READ ERROR" },
{ NVME_SC_GUARD_CHECK_ERROR, "GUARD CHECK ERROR" },
{ NVME_SC_APPLICATION_TAG_CHECK_ERROR, "APPLICATION TAG CHECK ERROR" },
{ NVME_SC_REFERENCE_TAG_CHECK_ERROR, "REFERENCE TAG CHECK ERROR" },
{ NVME_SC_COMPARE_FAILURE, "COMPARE FAILURE" },
{ NVME_SC_ACCESS_DENIED, "ACCESS DENIED" },
{ 0xFFFF, "MEDIA ERROR" }
};
static const char *
get_status_string(uint16_t sct, uint16_t sc)
{
struct nvme_status_string *entry;
switch (sct) {
case NVME_SCT_GENERIC:
entry = generic_status;
break;
case NVME_SCT_COMMAND_SPECIFIC:
entry = command_specific_status;
break;
case NVME_SCT_MEDIA_ERROR:
entry = media_error_status;
break;
case NVME_SCT_VENDOR_SPECIFIC:
return ("VENDOR SPECIFIC");
default:
return ("RESERVED");
}
while (entry->sc != 0xFFFF) {
if (entry->sc == sc)
return (entry->str);
entry++;
}
return (entry->str);
}
static void
nvme_qpair_print_completion(struct nvme_qpair *qpair,
struct nvme_completion *cpl)
{
nvme_printf(qpair->ctrlr, "%s (%02x/%02x) sqid:%d cid:%d cdw0:%x\n",
get_status_string(cpl->status.sct, cpl->status.sc),
cpl->status.sct, cpl->status.sc, cpl->sqid, cpl->cid, cpl->cdw0);
}
static boolean_t
nvme_completion_is_retry(const struct nvme_completion *cpl)
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
{
/*
* TODO: spec is not clear how commands that are aborted due
* to TLER will be marked. So for now, it seems
* NAMESPACE_NOT_READY is the only case where we should
* look at the DNR bit.
*/
switch (cpl->status.sct) {
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
case NVME_SCT_GENERIC:
switch (cpl->status.sc) {
case NVME_SC_ABORTED_BY_REQUEST:
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
case NVME_SC_NAMESPACE_NOT_READY:
if (cpl->status.dnr)
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
return (0);
else
return (1);
case NVME_SC_INVALID_OPCODE:
case NVME_SC_INVALID_FIELD:
case NVME_SC_COMMAND_ID_CONFLICT:
case NVME_SC_DATA_TRANSFER_ERROR:
case NVME_SC_ABORTED_POWER_LOSS:
case NVME_SC_INTERNAL_DEVICE_ERROR:
case NVME_SC_ABORTED_SQ_DELETION:
case NVME_SC_ABORTED_FAILED_FUSED:
case NVME_SC_ABORTED_MISSING_FUSED:
case NVME_SC_INVALID_NAMESPACE_OR_FORMAT:
case NVME_SC_COMMAND_SEQUENCE_ERROR:
case NVME_SC_LBA_OUT_OF_RANGE:
case NVME_SC_CAPACITY_EXCEEDED:
default:
return (0);
}
case NVME_SCT_COMMAND_SPECIFIC:
case NVME_SCT_MEDIA_ERROR:
case NVME_SCT_VENDOR_SPECIFIC:
default:
return (0);
}
}
static void
nvme_qpair_construct_tracker(struct nvme_qpair *qpair, struct nvme_tracker *tr,
uint16_t cid)
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
{
bus_dmamap_create(qpair->dma_tag, 0, &tr->payload_dma_map);
bus_dmamap_create(qpair->dma_tag, 0, &tr->prp_dma_map);
bus_dmamap_load(qpair->dma_tag, tr->prp_dma_map, tr->prp,
sizeof(tr->prp), nvme_single_map, &tr->prp_bus_addr, 0);
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
callout_init(&tr->timer, 1);
tr->cid = cid;
tr->qpair = qpair;
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
}
static void
nvme_qpair_complete_tracker(struct nvme_qpair *qpair, struct nvme_tracker *tr,
struct nvme_completion *cpl, boolean_t print_on_error)
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
{
struct nvme_request *req;
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
boolean_t retry, error;
req = tr->req;
error = nvme_completion_is_error(cpl);
retry = error && nvme_completion_is_retry(cpl) &&
req->retries < nvme_retry_count;
if (error && print_on_error) {
nvme_qpair_print_command(qpair, &req->cmd);
nvme_qpair_print_completion(qpair, cpl);
}
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
qpair->act_tr[cpl->cid] = NULL;
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
KASSERT(cpl->cid == req->cmd.cid, ("cpl cid does not match cmd cid\n"));
if (req->cb_fn && !retry)
req->cb_fn(req->cb_arg, cpl);
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
mtx_lock(&qpair->lock);
callout_stop(&tr->timer);
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
if (retry) {
req->retries++;
nvme_qpair_submit_tracker(qpair, tr);
} else {
if (req->type != NVME_REQUEST_NULL)
bus_dmamap_unload(qpair->dma_tag,
tr->payload_dma_map);
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
nvme_free_request(req);
tr->req = NULL;
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
TAILQ_REMOVE(&qpair->outstanding_tr, tr, tailq);
TAILQ_INSERT_HEAD(&qpair->free_tr, tr, tailq);
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
/*
* If the controller is in the middle of resetting, don't
* try to submit queued requests here - let the reset logic
* handle that instead.
*/
if (!STAILQ_EMPTY(&qpair->queued_req) &&
!qpair->ctrlr->is_resetting) {
req = STAILQ_FIRST(&qpair->queued_req);
STAILQ_REMOVE_HEAD(&qpair->queued_req, stailq);
_nvme_qpair_submit_request(qpair, req);
}
}
mtx_unlock(&qpair->lock);
}
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
static void
nvme_qpair_manual_complete_tracker(struct nvme_qpair *qpair,
struct nvme_tracker *tr, uint32_t sct, uint32_t sc, uint32_t dnr,
boolean_t print_on_error)
{
struct nvme_completion cpl;
memset(&cpl, 0, sizeof(cpl));
cpl.sqid = qpair->id;
cpl.cid = tr->cid;
cpl.status.sct = sct;
cpl.status.sc = sc;
cpl.status.dnr = dnr;
nvme_qpair_complete_tracker(qpair, tr, &cpl, print_on_error);
}
void
nvme_qpair_manual_complete_request(struct nvme_qpair *qpair,
struct nvme_request *req, uint32_t sct, uint32_t sc,
boolean_t print_on_error)
{
struct nvme_completion cpl;
boolean_t error;
memset(&cpl, 0, sizeof(cpl));
cpl.sqid = qpair->id;
cpl.status.sct = sct;
cpl.status.sc = sc;
error = nvme_completion_is_error(&cpl);
if (error && print_on_error) {
nvme_qpair_print_command(qpair, &req->cmd);
nvme_qpair_print_completion(qpair, &cpl);
}
if (req->cb_fn)
req->cb_fn(req->cb_arg, &cpl);
nvme_free_request(req);
}
void
nvme_qpair_process_completions(struct nvme_qpair *qpair)
{
struct nvme_tracker *tr;
struct nvme_completion *cpl;
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
qpair->num_intr_handler_calls++;
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
if (!qpair->is_enabled)
/*
* qpair is not enabled, likely because a controller reset is
* is in progress. Ignore the interrupt - any I/O that was
* associated with this interrupt will get retried when the
* reset is complete.
*/
return;
while (1) {
cpl = &qpair->cpl[qpair->cq_head];
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
if (cpl->status.p != qpair->phase)
break;
tr = qpair->act_tr[cpl->cid];
if (tr != NULL) {
nvme_qpair_complete_tracker(qpair, tr, cpl, TRUE);
qpair->sq_head = cpl->sqhd;
} else {
nvme_printf(qpair->ctrlr,
"cpl does not map to outstanding cmd\n");
nvme_dump_completion(cpl);
KASSERT(0, ("received completion for unknown cmd\n"));
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
}
if (++qpair->cq_head == qpair->num_entries) {
qpair->cq_head = 0;
qpair->phase = !qpair->phase;
}
nvme_mmio_write_4(qpair->ctrlr, doorbell[qpair->id].cq_hdbl,
qpair->cq_head);
}
}
static void
nvme_qpair_msix_handler(void *arg)
{
struct nvme_qpair *qpair = arg;
nvme_qpair_process_completions(qpair);
}
void
nvme_qpair_construct(struct nvme_qpair *qpair, uint32_t id,
uint16_t vector, uint32_t num_entries, uint32_t num_trackers,
uint32_t max_xfer_size, struct nvme_controller *ctrlr)
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
{
struct nvme_tracker *tr;
uint32_t i;
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
qpair->id = id;
qpair->vector = vector;
qpair->num_entries = num_entries;
#ifdef CHATHAM2
/*
* Chatham prototype board starts having issues at higher queue
* depths. So use a conservative estimate here of no more than 64
* outstanding I/O per queue at any one point.
*/
if (pci_get_devid(ctrlr->dev) == CHATHAM_PCI_ID)
num_trackers = min(num_trackers, 64);
#endif
qpair->num_trackers = num_trackers;
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
qpair->max_xfer_size = max_xfer_size;
qpair->ctrlr = ctrlr;
if (ctrlr->msix_enabled) {
/*
* MSI-X vector resource IDs start at 1, so we add one to
* the queue's vector to get the corresponding rid to use.
*/
qpair->rid = vector + 1;
qpair->res = bus_alloc_resource_any(ctrlr->dev, SYS_RES_IRQ,
&qpair->rid, RF_ACTIVE);
bus_setup_intr(ctrlr->dev, qpair->res,
INTR_TYPE_MISC | INTR_MPSAFE, NULL,
nvme_qpair_msix_handler, qpair, &qpair->tag);
}
mtx_init(&qpair->lock, "nvme qpair lock", NULL, MTX_DEF);
bus_dma_tag_create(bus_get_dma_tag(ctrlr->dev),
sizeof(uint64_t), PAGE_SIZE, BUS_SPACE_MAXADDR,
BUS_SPACE_MAXADDR, NULL, NULL, qpair->max_xfer_size,
(qpair->max_xfer_size/PAGE_SIZE)+1, PAGE_SIZE, 0,
NULL, NULL, &qpair->dma_tag);
qpair->num_cmds = 0;
qpair->num_intr_handler_calls = 0;
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
qpair->cmd = contigmalloc(qpair->num_entries *
sizeof(struct nvme_command), M_NVME, M_ZERO,
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
0, BUS_SPACE_MAXADDR, PAGE_SIZE, 0);
qpair->cpl = contigmalloc(qpair->num_entries *
sizeof(struct nvme_completion), M_NVME, M_ZERO,
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
0, BUS_SPACE_MAXADDR, PAGE_SIZE, 0);
bus_dmamap_create(qpair->dma_tag, 0, &qpair->cmd_dma_map);
bus_dmamap_create(qpair->dma_tag, 0, &qpair->cpl_dma_map);
bus_dmamap_load(qpair->dma_tag, qpair->cmd_dma_map,
qpair->cmd, qpair->num_entries * sizeof(struct nvme_command),
nvme_single_map, &qpair->cmd_bus_addr, 0);
bus_dmamap_load(qpair->dma_tag, qpair->cpl_dma_map,
qpair->cpl, qpair->num_entries * sizeof(struct nvme_completion),
nvme_single_map, &qpair->cpl_bus_addr, 0);
qpair->sq_tdbl_off = nvme_mmio_offsetof(doorbell[id].sq_tdbl);
qpair->cq_hdbl_off = nvme_mmio_offsetof(doorbell[id].cq_hdbl);
TAILQ_INIT(&qpair->free_tr);
TAILQ_INIT(&qpair->outstanding_tr);
STAILQ_INIT(&qpair->queued_req);
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
for (i = 0; i < qpair->num_trackers; i++) {
tr = malloc(sizeof(*tr), M_NVME, M_ZERO | M_WAITOK);
nvme_qpair_construct_tracker(qpair, tr, i);
TAILQ_INSERT_HEAD(&qpair->free_tr, tr, tailq);
}
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
qpair->act_tr = malloc(sizeof(struct nvme_tracker *) * qpair->num_entries,
M_NVME, M_ZERO | M_WAITOK);
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
}
static void
nvme_qpair_destroy(struct nvme_qpair *qpair)
{
struct nvme_tracker *tr;
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
if (qpair->tag)
bus_teardown_intr(qpair->ctrlr->dev, qpair->res, qpair->tag);
if (qpair->res)
bus_release_resource(qpair->ctrlr->dev, SYS_RES_IRQ,
rman_get_rid(qpair->res), qpair->res);
if (qpair->cmd) {
bus_dmamap_unload(qpair->dma_tag, qpair->cmd_dma_map);
bus_dmamap_destroy(qpair->dma_tag, qpair->cmd_dma_map);
contigfree(qpair->cmd,
qpair->num_entries * sizeof(struct nvme_command), M_NVME);
}
if (qpair->cpl) {
bus_dmamap_unload(qpair->dma_tag, qpair->cpl_dma_map);
bus_dmamap_destroy(qpair->dma_tag, qpair->cpl_dma_map);
contigfree(qpair->cpl,
qpair->num_entries * sizeof(struct nvme_completion),
M_NVME);
}
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
if (qpair->dma_tag)
bus_dma_tag_destroy(qpair->dma_tag);
if (qpair->act_tr)
free(qpair->act_tr, M_NVME);
while (!TAILQ_EMPTY(&qpair->free_tr)) {
tr = TAILQ_FIRST(&qpair->free_tr);
TAILQ_REMOVE(&qpair->free_tr, tr, tailq);
bus_dmamap_destroy(qpair->dma_tag, tr->payload_dma_map);
bus_dmamap_destroy(qpair->dma_tag, tr->prp_dma_map);
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
free(tr, M_NVME);
}
}
static void
nvme_admin_qpair_abort_aers(struct nvme_qpair *qpair)
{
struct nvme_tracker *tr;
tr = TAILQ_FIRST(&qpair->outstanding_tr);
while (tr != NULL) {
if (tr->req->cmd.opc == NVME_OPC_ASYNC_EVENT_REQUEST) {
nvme_qpair_manual_complete_tracker(qpair, tr,
NVME_SCT_GENERIC, NVME_SC_ABORTED_SQ_DELETION, 0,
FALSE);
tr = TAILQ_FIRST(&qpair->outstanding_tr);
} else {
tr = TAILQ_NEXT(tr, tailq);
}
}
}
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
void
nvme_admin_qpair_destroy(struct nvme_qpair *qpair)
{
nvme_admin_qpair_abort_aers(qpair);
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
nvme_qpair_destroy(qpair);
}
void
nvme_io_qpair_destroy(struct nvme_qpair *qpair)
{
nvme_qpair_destroy(qpair);
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
}
static void
nvme_abort_complete(void *arg, const struct nvme_completion *status)
{
struct nvme_tracker *tr = arg;
/*
* If cdw0 == 1, the controller was not able to abort the command
* we requested. We still need to check the active tracker array,
* to cover race where I/O timed out at same time controller was
* completing the I/O.
*/
if (status->cdw0 == 1 && tr->qpair->act_tr[tr->cid] != NULL) {
/*
* An I/O has timed out, and the controller was unable to
* abort it for some reason. Construct a fake completion
* status, and then complete the I/O's tracker manually.
*/
nvme_printf(tr->qpair->ctrlr,
"abort command failed, aborting command manually\n");
nvme_qpair_manual_complete_tracker(tr->qpair, tr,
NVME_SCT_GENERIC, NVME_SC_ABORTED_BY_REQUEST, 0, TRUE);
}
}
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
static void
nvme_timeout(void *arg)
{
struct nvme_tracker *tr = arg;
struct nvme_qpair *qpair = tr->qpair;
struct nvme_controller *ctrlr = qpair->ctrlr;
union csts_register csts;
/* Read csts to get value of cfs - controller fatal status. */
csts.raw = nvme_mmio_read_4(ctrlr, csts);
if (ctrlr->enable_aborts && csts.bits.cfs == 0) {
/*
* If aborts are enabled, only use them if the controller is
* not reporting fatal status.
*/
nvme_ctrlr_cmd_abort(ctrlr, tr->cid, qpair->id,
nvme_abort_complete, tr);
} else
nvme_ctrlr_reset(ctrlr);
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
}
void
nvme_qpair_submit_tracker(struct nvme_qpair *qpair, struct nvme_tracker *tr)
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
{
struct nvme_request *req;
struct nvme_controller *ctrlr;
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
mtx_assert(&qpair->lock, MA_OWNED);
req = tr->req;
req->cmd.cid = tr->cid;
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
qpair->act_tr[tr->cid] = tr;
ctrlr = qpair->ctrlr;
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
if (req->timeout)
#if __FreeBSD_version >= 800030
callout_reset_curcpu(&tr->timer, ctrlr->timeout_period * hz,
nvme_timeout, tr);
#else
callout_reset(&tr->timer, ctrlr->timeout_period * hz,
nvme_timeout, tr);
#endif
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
/* Copy the command from the tracker to the submission queue. */
memcpy(&qpair->cmd[qpair->sq_tail], &req->cmd, sizeof(req->cmd));
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
if (++qpair->sq_tail == qpair->num_entries)
qpair->sq_tail = 0;
wmb();
nvme_mmio_write_4(qpair->ctrlr, doorbell[qpair->id].sq_tdbl,
qpair->sq_tail);
qpair->num_cmds++;
}
static void
nvme_payload_map(void *arg, bus_dma_segment_t *seg, int nseg, int error)
{
struct nvme_tracker *tr = arg;
uint32_t cur_nseg;
/*
* If the mapping operation failed, return immediately. The caller
* is responsible for detecting the error status and failing the
* tracker manually.
*/
if (error != 0)
return;
/*
* Note that we specified PAGE_SIZE for alignment and max
* segment size when creating the bus dma tags. So here
* we can safely just transfer each segment to its
* associated PRP entry.
*/
tr->req->cmd.prp1 = seg[0].ds_addr;
if (nseg == 2) {
tr->req->cmd.prp2 = seg[1].ds_addr;
} else if (nseg > 2) {
cur_nseg = 1;
tr->req->cmd.prp2 = (uint64_t)tr->prp_bus_addr;
while (cur_nseg < nseg) {
tr->prp[cur_nseg-1] =
(uint64_t)seg[cur_nseg].ds_addr;
cur_nseg++;
}
}
nvme_qpair_submit_tracker(tr->qpair, tr);
}
static void
nvme_payload_map_uio(void *arg, bus_dma_segment_t *seg, int nseg,
bus_size_t mapsize, int error)
{
nvme_payload_map(arg, seg, nseg, error);
}
static void
_nvme_qpair_submit_request(struct nvme_qpair *qpair, struct nvme_request *req)
{
struct nvme_tracker *tr;
int err = 0;
mtx_assert(&qpair->lock, MA_OWNED);
tr = TAILQ_FIRST(&qpair->free_tr);
req->qpair = qpair;
if (tr == NULL || !qpair->is_enabled) {
/*
* No tracker is available, or the qpair is disabled due to
* an in-progress controller-level reset or controller
* failure.
*/
if (qpair->ctrlr->is_failed) {
/*
* The controller has failed. Post the request to a
* task where it will be aborted, so that we do not
* invoke the request's callback in the context
* of the submission.
*/
nvme_ctrlr_post_failed_request(qpair->ctrlr, req);
} else {
/*
* Put the request on the qpair's request queue to be
* processed when a tracker frees up via a command
* completion or when the controller reset is
* completed.
*/
STAILQ_INSERT_TAIL(&qpair->queued_req, req, stailq);
}
return;
}
TAILQ_REMOVE(&qpair->free_tr, tr, tailq);
TAILQ_INSERT_TAIL(&qpair->outstanding_tr, tr, tailq);
tr->req = req;
switch (req->type) {
case NVME_REQUEST_VADDR:
err = bus_dmamap_load(tr->qpair->dma_tag, tr->payload_dma_map,
req->u.payload, req->payload_size, nvme_payload_map, tr, 0);
if (err != 0)
nvme_printf(qpair->ctrlr,
"bus_dmamap_load returned 0x%x!\n", err);
break;
case NVME_REQUEST_NULL:
nvme_qpair_submit_tracker(tr->qpair, tr);
break;
case NVME_REQUEST_UIO:
err = bus_dmamap_load_uio(tr->qpair->dma_tag,
tr->payload_dma_map, req->u.uio, nvme_payload_map_uio,
tr, 0);
if (err != 0)
nvme_printf(qpair->ctrlr,
"bus_dmamap_load_uio returned 0x%x!\n", err);
break;
#ifdef NVME_UNMAPPED_BIO_SUPPORT
case NVME_REQUEST_BIO:
err = bus_dmamap_load_bio(tr->qpair->dma_tag,
tr->payload_dma_map, req->u.bio, nvme_payload_map, tr, 0);
if (err != 0)
nvme_printf(qpair->ctrlr,
"bus_dmamap_load_bio returned 0x%x!\n", err);
break;
#endif
default:
panic("unknown nvme request type 0x%x\n", req->type);
break;
}
if (err != 0) {
/*
* The dmamap operation failed, so we manually fail the
* tracker here with DATA_TRANSFER_ERROR status.
*
* nvme_qpair_manual_complete_tracker must not be called
* with the qpair lock held.
*/
mtx_unlock(&qpair->lock);
nvme_qpair_manual_complete_tracker(qpair, tr, NVME_SCT_GENERIC,
NVME_SC_DATA_TRANSFER_ERROR, 1 /* do not retry */, TRUE);
mtx_lock(&qpair->lock);
}
}
void
nvme_qpair_submit_request(struct nvme_qpair *qpair, struct nvme_request *req)
{
mtx_lock(&qpair->lock);
_nvme_qpair_submit_request(qpair, req);
mtx_unlock(&qpair->lock);
}
static void
nvme_qpair_enable(struct nvme_qpair *qpair)
{
qpair->is_enabled = TRUE;
}
void
nvme_qpair_reset(struct nvme_qpair *qpair)
{
qpair->sq_head = qpair->sq_tail = qpair->cq_head = 0;
/*
* First time through the completion queue, HW will set phase
* bit on completions to 1. So set this to 1 here, indicating
* we're looking for a 1 to know which entries have completed.
* we'll toggle the bit each time when the completion queue
* rolls over.
*/
qpair->phase = 1;
memset(qpair->cmd, 0,
qpair->num_entries * sizeof(struct nvme_command));
memset(qpair->cpl, 0,
qpair->num_entries * sizeof(struct nvme_completion));
}
void
nvme_admin_qpair_enable(struct nvme_qpair *qpair)
{
struct nvme_tracker *tr;
struct nvme_tracker *tr_temp;
/*
* Manually abort each outstanding admin command. Do not retry
* admin commands found here, since they will be left over from
* a controller reset and its likely the context in which the
* command was issued no longer applies.
*/
TAILQ_FOREACH_SAFE(tr, &qpair->outstanding_tr, tailq, tr_temp) {
nvme_printf(qpair->ctrlr,
"aborting outstanding admin command\n");
nvme_qpair_manual_complete_tracker(qpair, tr, NVME_SCT_GENERIC,
NVME_SC_ABORTED_BY_REQUEST, 1 /* do not retry */, TRUE);
}
nvme_qpair_enable(qpair);
}
void
nvme_io_qpair_enable(struct nvme_qpair *qpair)
{
STAILQ_HEAD(, nvme_request) temp;
struct nvme_tracker *tr;
struct nvme_tracker *tr_temp;
struct nvme_request *req;
/*
* Manually abort each outstanding I/O. This normally results in a
* retry, unless the retry count on the associated request has
* reached its limit.
*/
TAILQ_FOREACH_SAFE(tr, &qpair->outstanding_tr, tailq, tr_temp) {
nvme_printf(qpair->ctrlr, "aborting outstanding i/o\n");
nvme_qpair_manual_complete_tracker(qpair, tr, NVME_SCT_GENERIC,
NVME_SC_ABORTED_BY_REQUEST, 0, TRUE);
}
mtx_lock(&qpair->lock);
nvme_qpair_enable(qpair);
STAILQ_INIT(&temp);
STAILQ_SWAP(&qpair->queued_req, &temp, nvme_request);
while (!STAILQ_EMPTY(&temp)) {
req = STAILQ_FIRST(&temp);
STAILQ_REMOVE_HEAD(&temp, stailq);
nvme_printf(qpair->ctrlr, "resubmitting queued i/o\n");
nvme_qpair_print_command(qpair, &req->cmd);
_nvme_qpair_submit_request(qpair, req);
}
mtx_unlock(&qpair->lock);
}
static void
nvme_qpair_disable(struct nvme_qpair *qpair)
{
struct nvme_tracker *tr;
qpair->is_enabled = FALSE;
mtx_lock(&qpair->lock);
TAILQ_FOREACH(tr, &qpair->outstanding_tr, tailq)
callout_stop(&tr->timer);
mtx_unlock(&qpair->lock);
}
void
nvme_admin_qpair_disable(struct nvme_qpair *qpair)
{
nvme_qpair_disable(qpair);
nvme_admin_qpair_abort_aers(qpair);
}
void
nvme_io_qpair_disable(struct nvme_qpair *qpair)
{
nvme_qpair_disable(qpair);
}
void
nvme_qpair_fail(struct nvme_qpair *qpair)
{
struct nvme_tracker *tr;
struct nvme_request *req;
mtx_lock(&qpair->lock);
while (!STAILQ_EMPTY(&qpair->queued_req)) {
req = STAILQ_FIRST(&qpair->queued_req);
STAILQ_REMOVE_HEAD(&qpair->queued_req, stailq);
nvme_printf(qpair->ctrlr, "failing queued i/o\n");
mtx_unlock(&qpair->lock);
nvme_qpair_manual_complete_request(qpair, req, NVME_SCT_GENERIC,
NVME_SC_ABORTED_BY_REQUEST, TRUE);
mtx_lock(&qpair->lock);
}
/* Manually abort each outstanding I/O. */
while (!TAILQ_EMPTY(&qpair->outstanding_tr)) {
tr = TAILQ_FIRST(&qpair->outstanding_tr);
/*
* Do not remove the tracker. The abort_tracker path will
* do that for us.
*/
nvme_printf(qpair->ctrlr, "failing outstanding i/o\n");
mtx_unlock(&qpair->lock);
nvme_qpair_manual_complete_tracker(qpair, tr, NVME_SCT_GENERIC,
NVME_SC_ABORTED_BY_REQUEST, 1 /* do not retry */, TRUE);
mtx_lock(&qpair->lock);
}
mtx_unlock(&qpair->lock);
}