freebsd-dev/sbin/dump/dump.h

185 lines
6.7 KiB
C
Raw Normal View History

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (c) 1980, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)dump.h 8.2 (Berkeley) 4/28/95
*
* $FreeBSD$
*/
/*
* Dump maps used to describe what is to be dumped.
*/
extern int mapsize; /* size of the state maps */
extern char *usedinomap; /* map of allocated inodes */
extern char *dumpdirmap; /* map of directories to be dumped */
extern char *dumpinomap; /* map of files to be dumped */
/*
* Map manipulation macros.
*/
#define SETINO(ino, map) \
map[(u_int)((ino) - 1) / CHAR_BIT] |= \
1 << ((u_int)((ino) - 1) % CHAR_BIT)
#define CLRINO(ino, map) \
map[(u_int)((ino) - 1) / CHAR_BIT] &= \
~(1 << ((u_int)((ino) - 1) % CHAR_BIT))
#define TSTINO(ino, map) \
(map[(u_int)((ino) - 1) / CHAR_BIT] & \
(1 << ((u_int)((ino) - 1) % CHAR_BIT)))
/*
* All calculations done in 0.1" units!
*/
extern char *disk; /* name of the disk file */
extern char *tape; /* name of the tape file */
extern char *popenout; /* popen(3) per-"tape" command */
extern char *dumpdates; /* name of the file containing dump date info */
extern int lastlevel; /* dump level of previous dump */
extern int level; /* dump level of this dump */
extern int uflag; /* update flag */
extern int diskfd; /* disk file descriptor */
extern int pipeout; /* true => output to standard output */
extern ino_t curino; /* current inumber; used globally */
extern int newtape; /* new tape flag */
extern int density; /* density in 0.1" units */
extern long tapesize; /* estimated tape size, blocks */
extern long tsize; /* tape size in 0.1" units */
extern int etapes; /* estimated number of tapes */
extern int nonodump; /* if set, do not honor UF_NODUMP user flags */
extern int unlimited; /* if set, write to end of medium */
extern int cachesize; /* size of block cache in bytes */
extern int rsync_friendly; /* be friendly with rsync */
extern int notify; /* notify operator flag */
extern int blockswritten; /* number of blocks written on current tape */
extern int tapeno; /* current tape number */
extern int ntrec; /* blocking factor on tape */
extern long blocksperfile; /* number of blocks per output file */
extern int cartridge; /* assume non-cartridge tape */
extern char *host; /* remote host (if any) */
extern time_t tstart_writing; /* when started writing the first tape block */
extern time_t tend_writing; /* after writing the last tape block */
extern int passno; /* current dump pass number */
extern struct fs *sblock; /* the file system super block */
extern long dev_bsize; /* block size of underlying disk device */
extern int dev_bshift; /* log2(dev_bsize) */
extern int tp_bshift; /* log2(TP_BSIZE) */
/* operator interface functions */
void broadcast(const char *message);
void infosch(int);
void lastdump(int arg); /* int should be char */
void msg(const char *fmt, ...) __printflike(1, 2);
void msgtail(const char *fmt, ...) __printflike(1, 2);
int query(const char *question);
void quit(const char *fmt, ...) __printflike(1, 2);
void timeest(void);
time_t unctime(char *str);
/* mapping rouintes */
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
union dinode;
int mapfiles(ino_t maxino, long *tapesize);
int mapdirs(ino_t maxino, long *tapesize);
/* file dumping routines */
void blkread(ufs2_daddr_t blkno, char *buf, int size);
2003-11-04 12:27:18 +00:00
ssize_t cread(int fd, void *buf, size_t nbytes, off_t offset);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
void dumpino(union dinode *dp, ino_t ino);
void dumpmap(char *map, int type, ino_t ino);
void writeheader(ino_t ino);
/* tape writing routines */
int alloctape(void);
void close_rewind(void);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
void dumpblock(ufs2_daddr_t blkno, int size);
void startnewtape(int top);
void trewind(void);
void writerec(char *dp, int isspcl);
void Exit(int status) __dead2;
void dumpabort(int signo) __dead2;
void dump_getfstab(void);
char *rawname(char *cp);
union dinode *getino(ino_t inum, int *mode);
/* rdump routines */
#ifdef RDUMP
void rmtclose(void);
int rmthost(const char *host);
int rmtopen(const char *tape, int mode);
int rmtwrite(const char *buf, int count);
#endif /* RDUMP */
void interrupt(int signo); /* in case operator bangs on console */
/*
* Exit status codes
*/
#define X_FINOK 0 /* normal exit */
#define X_STARTUP 1 /* startup error */
#define X_REWRITE 2 /* restart writing from the check point */
#define X_ABORT 3 /* abort dump; don't attempt checkpointing */
#define OPGRENT "operator" /* group entry to notify */
struct fstab *fstabsearch(const char *key); /* search fs_file and fs_spec */
#ifndef NAME_MAX
#define NAME_MAX 255
#endif
/*
* The contents of the file _PATH_DUMPDATES is maintained both on
* a linked list, and then (eventually) arrayified.
*/
struct dumpdates {
char dd_name[NAME_MAX+3];
int dd_level;
time_t dd_ddate;
};
extern int nddates; /* number of records (might be zero) */
extern struct dumpdates **ddatev; /* the arrayfied version */
void initdumptimes(void);
void getdumptime(void);
void putdumptime(void);
#define ITITERATE(i, ddp) \
if (ddatev != NULL) \
for (ddp = ddatev[i = 0]; i < nddates; ddp = ddatev[++i])
#define DUMPFMTLEN 53 /* max device pathname length */
#define DUMPOUTFMT "%-*s %d %s" /* for printf */
/* name, level, ctime(date) */
#define DUMPINFMT "%s %d %[^\n]\n" /* inverse for scanf */
void sig(int signo);
#ifndef _PATH_FSTAB
#define _PATH_FSTAB "/etc/fstab"
#endif