freebsd-dev/usr.sbin/ndiscvt/ndiscvt.8

284 lines
7.6 KiB
Groff
Raw Normal View History

.\" Copyright (c) 2003
.\" Bill Paul <wpaul@windriver.com> All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\" must display the following acknowledgement:
.\" This product includes software developed by Bill Paul.
.\" 4. Neither the name of the author nor the names of any co-contributors
.\" may be used to endorse or promote products derived from this software
.\" without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
.\" THE POSSIBILITY OF SUCH DAMAGE.
.\"
.\" $FreeBSD$
.\"
.Dd December 10, 2003
.Dt NDISCVT 8
.Os
.Sh NAME
.Nm ndiscvt
.Nd convert
.Tn Windows\[rg]
2005-06-16 19:36:40 +00:00
NDIS drivers for use with FreeBSD
.Sh SYNOPSIS
.Nm
Big mess 'o changes: - Give ndiscvt(8) the ability to process a .SYS file directly into a .o file so that we don't have to emit big messy char arrays into the ndis_driver_data.h file. This behavior is currently optional, but may become the default some day. - Give ndiscvt(8) the ability to turn arbitrary files into .ko files so that they can be pre-loaded or kldloaded. (Both this and the previous change involve using objcopy(1)). - Give NdisOpenFile() the ability to 'read' files out of kernel memory that have been kldloaded or pre-loaded, and disallow the use of the normal vn_open() file opening method during bootstrap (when no filesystems have been mounted yet). Some people have reported that kldloading if_ndis.ko works fine when the system is running multiuser but causes a panic when the modile is pre-loaded by /boot/loader. This happens with drivers that need to use NdisOpenFile() to access external files (i.e. firmware images). NdisOpenFile() won't work during kernel bootstrapping because no filesystems have been mounted. To get around this, you can now do the following: o Say you have a firmware file called firmware.img o Do: ndiscvt -f firmware.img -- this creates firmware.img.ko o Put the firmware.img.ko in /boot/kernel o add firmware.img_load="YES" in /boot/loader.conf o add if_ndis_load="YES" and ndis_load="YES" as well Now the loader will suck the additional file into memory as a .ko. The phony .ko has two symbols in it: filename_start and filename_end, which are generated by objcopy(1). ndis_open_file() will traverse each module in the module list looking for these symbols and, if it finds them, it'll use them to generate the file mapping address and length values that the caller of NdisOpenFile() wants. As a bonus, this will even work if the file has been statically linked into the kernel itself, since the "kernel" module is searched too. (ndiscvt(8) will generate both filename.o and filename.ko for you). - Modify the mechanism used to provide make-pretend FASTCALL support. Rather than using inline assembly to yank the first two arguments out of %ecx and %edx, we now use the __regparm__(3) attribute (and the __stdcall__ attribute) and use some macro magic to re-order the arguments and provide dummy arguments as needed so that the arguments passed in registers end up in the right place. Change taken from DragonflyBSD version of the NDISulator.
2004-08-01 20:04:31 +00:00
.Op Fl O
.Op Fl i Ar inffile
.Fl s Ar sysfile
.Op Fl n Ar devname
.Op Fl o Ar outfile
Big mess 'o changes: - Give ndiscvt(8) the ability to process a .SYS file directly into a .o file so that we don't have to emit big messy char arrays into the ndis_driver_data.h file. This behavior is currently optional, but may become the default some day. - Give ndiscvt(8) the ability to turn arbitrary files into .ko files so that they can be pre-loaded or kldloaded. (Both this and the previous change involve using objcopy(1)). - Give NdisOpenFile() the ability to 'read' files out of kernel memory that have been kldloaded or pre-loaded, and disallow the use of the normal vn_open() file opening method during bootstrap (when no filesystems have been mounted yet). Some people have reported that kldloading if_ndis.ko works fine when the system is running multiuser but causes a panic when the modile is pre-loaded by /boot/loader. This happens with drivers that need to use NdisOpenFile() to access external files (i.e. firmware images). NdisOpenFile() won't work during kernel bootstrapping because no filesystems have been mounted. To get around this, you can now do the following: o Say you have a firmware file called firmware.img o Do: ndiscvt -f firmware.img -- this creates firmware.img.ko o Put the firmware.img.ko in /boot/kernel o add firmware.img_load="YES" in /boot/loader.conf o add if_ndis_load="YES" and ndis_load="YES" as well Now the loader will suck the additional file into memory as a .ko. The phony .ko has two symbols in it: filename_start and filename_end, which are generated by objcopy(1). ndis_open_file() will traverse each module in the module list looking for these symbols and, if it finds them, it'll use them to generate the file mapping address and length values that the caller of NdisOpenFile() wants. As a bonus, this will even work if the file has been statically linked into the kernel itself, since the "kernel" module is searched too. (ndiscvt(8) will generate both filename.o and filename.ko for you). - Modify the mechanism used to provide make-pretend FASTCALL support. Rather than using inline assembly to yank the first two arguments out of %ecx and %edx, we now use the __regparm__(3) attribute (and the __stdcall__ attribute) and use some macro magic to re-order the arguments and provide dummy arguments as needed so that the arguments passed in registers end up in the right place. Change taken from DragonflyBSD version of the NDISulator.
2004-08-01 20:04:31 +00:00
.Nm
.Op Fl f Ar firmfile
.Sh DESCRIPTION
The
.Nm
utility transforms a
.Tn Windows\[rg]
NDIS driver into a data file which
is used to build an
.Xr ndis 4
compatibility driver module.
.Tn Windows\[rg]
drivers consist of two main parts: a
.Pa .SYS
file, which contains the actual driver executable code,
and an
.Pa .INF
file, which provides the
.Tn Windows\[rg]
installer with device
identifier information and a list of driver-specific registry keys.
The
.Nm
utility can convert these files into a header file that is compiled
into
.Pa if_ndis.c
to create an object code module that can be linked into
the
.Fx
kernel.
.Pp
The
.Pa .INF
file is typically required since only it contains device
identification data such as PCI vendor and device IDs or PCMCIA
identifier strings.
The
.Pa .INF
file may be optionally omitted however,
in which case the
.Nm
utility will only perform the conversion of the
.Pa .SYS
file.
This is useful for debugging purposes only.
.Sh OPTIONS
The options are as follows:
.Bl -tag -width indent
.It Fl i Ar inffile
Open and parse the specified
.Pa .INF
file when performing conversion.
The
.Nm
utility will parse this file and emit a device identification
structure and registry key configuration structures which will be
used by the
.Xr ndis 4
driver and
.Xr ndisapi 9
kernel subsystem.
If this is omitted,
.Nm
will emit a dummy configuration structure only.
.It Fl s Ar sysfile
Open and parse the specified
.Pa .SYS
file.
This file must contain a
.Tn Windows\[rg]
driver image.
The
.Nm
utility will perform some manipulation of the sections within the
executable file to make runtime linking within the kernel a little
easier and then convert the image into a data array.
.It Fl n Ar devname
Specify an alternate name for the network device/interface which will
be created when the driver is instantiated.
If you need to load more
than one NDIS driver into your system (i.e., if you have two different
network cards in your system which require NDIS driver support), each
module you create must have a unique name.
Device can not be larger than
.Dv IFNAMSIZ .
If no name is specified, the driver will use the
default a default name
.Pq Dq Li ndis .
.It Fl o Ar outfile
Specify the output file in which to place the resulting data.
This can be any file pathname.
If
.Ar outfile
is a single dash
.Pq Sq Fl ,
the data will be written to the standard output.
The
.Pa if_ndis.c
module expects to find the driver data in a file called
.Pa ndis_driver_data.h ,
so it is recommended that this name be used.
Big mess 'o changes: - Give ndiscvt(8) the ability to process a .SYS file directly into a .o file so that we don't have to emit big messy char arrays into the ndis_driver_data.h file. This behavior is currently optional, but may become the default some day. - Give ndiscvt(8) the ability to turn arbitrary files into .ko files so that they can be pre-loaded or kldloaded. (Both this and the previous change involve using objcopy(1)). - Give NdisOpenFile() the ability to 'read' files out of kernel memory that have been kldloaded or pre-loaded, and disallow the use of the normal vn_open() file opening method during bootstrap (when no filesystems have been mounted yet). Some people have reported that kldloading if_ndis.ko works fine when the system is running multiuser but causes a panic when the modile is pre-loaded by /boot/loader. This happens with drivers that need to use NdisOpenFile() to access external files (i.e. firmware images). NdisOpenFile() won't work during kernel bootstrapping because no filesystems have been mounted. To get around this, you can now do the following: o Say you have a firmware file called firmware.img o Do: ndiscvt -f firmware.img -- this creates firmware.img.ko o Put the firmware.img.ko in /boot/kernel o add firmware.img_load="YES" in /boot/loader.conf o add if_ndis_load="YES" and ndis_load="YES" as well Now the loader will suck the additional file into memory as a .ko. The phony .ko has two symbols in it: filename_start and filename_end, which are generated by objcopy(1). ndis_open_file() will traverse each module in the module list looking for these symbols and, if it finds them, it'll use them to generate the file mapping address and length values that the caller of NdisOpenFile() wants. As a bonus, this will even work if the file has been statically linked into the kernel itself, since the "kernel" module is searched too. (ndiscvt(8) will generate both filename.o and filename.ko for you). - Modify the mechanism used to provide make-pretend FASTCALL support. Rather than using inline assembly to yank the first two arguments out of %ecx and %edx, we now use the __regparm__(3) attribute (and the __stdcall__ attribute) and use some macro magic to re-order the arguments and provide dummy arguments as needed so that the arguments passed in registers end up in the right place. Change taken from DragonflyBSD version of the NDISulator.
2004-08-01 20:04:31 +00:00
.It Fl O
Generate both an
.Pa ndis_driver_data.h
file and
an
.Pa ndis_driver.data.o
2005-01-11 11:47:22 +00:00
file.
The latter file will contain a copy of the
Big mess 'o changes: - Give ndiscvt(8) the ability to process a .SYS file directly into a .o file so that we don't have to emit big messy char arrays into the ndis_driver_data.h file. This behavior is currently optional, but may become the default some day. - Give ndiscvt(8) the ability to turn arbitrary files into .ko files so that they can be pre-loaded or kldloaded. (Both this and the previous change involve using objcopy(1)). - Give NdisOpenFile() the ability to 'read' files out of kernel memory that have been kldloaded or pre-loaded, and disallow the use of the normal vn_open() file opening method during bootstrap (when no filesystems have been mounted yet). Some people have reported that kldloading if_ndis.ko works fine when the system is running multiuser but causes a panic when the modile is pre-loaded by /boot/loader. This happens with drivers that need to use NdisOpenFile() to access external files (i.e. firmware images). NdisOpenFile() won't work during kernel bootstrapping because no filesystems have been mounted. To get around this, you can now do the following: o Say you have a firmware file called firmware.img o Do: ndiscvt -f firmware.img -- this creates firmware.img.ko o Put the firmware.img.ko in /boot/kernel o add firmware.img_load="YES" in /boot/loader.conf o add if_ndis_load="YES" and ndis_load="YES" as well Now the loader will suck the additional file into memory as a .ko. The phony .ko has two symbols in it: filename_start and filename_end, which are generated by objcopy(1). ndis_open_file() will traverse each module in the module list looking for these symbols and, if it finds them, it'll use them to generate the file mapping address and length values that the caller of NdisOpenFile() wants. As a bonus, this will even work if the file has been statically linked into the kernel itself, since the "kernel" module is searched too. (ndiscvt(8) will generate both filename.o and filename.ko for you). - Modify the mechanism used to provide make-pretend FASTCALL support. Rather than using inline assembly to yank the first two arguments out of %ecx and %edx, we now use the __regparm__(3) attribute (and the __stdcall__ attribute) and use some macro magic to re-order the arguments and provide dummy arguments as needed so that the arguments passed in registers end up in the right place. Change taken from DragonflyBSD version of the NDISulator.
2004-08-01 20:04:31 +00:00
.Tn Windows\[rg]
.Pa .SYS
driver image encoded as a
.Fx
ELF object file
2005-01-11 11:47:22 +00:00
(created with
.Xr objcopy 1 ) .
Big mess 'o changes: - Give ndiscvt(8) the ability to process a .SYS file directly into a .o file so that we don't have to emit big messy char arrays into the ndis_driver_data.h file. This behavior is currently optional, but may become the default some day. - Give ndiscvt(8) the ability to turn arbitrary files into .ko files so that they can be pre-loaded or kldloaded. (Both this and the previous change involve using objcopy(1)). - Give NdisOpenFile() the ability to 'read' files out of kernel memory that have been kldloaded or pre-loaded, and disallow the use of the normal vn_open() file opening method during bootstrap (when no filesystems have been mounted yet). Some people have reported that kldloading if_ndis.ko works fine when the system is running multiuser but causes a panic when the modile is pre-loaded by /boot/loader. This happens with drivers that need to use NdisOpenFile() to access external files (i.e. firmware images). NdisOpenFile() won't work during kernel bootstrapping because no filesystems have been mounted. To get around this, you can now do the following: o Say you have a firmware file called firmware.img o Do: ndiscvt -f firmware.img -- this creates firmware.img.ko o Put the firmware.img.ko in /boot/kernel o add firmware.img_load="YES" in /boot/loader.conf o add if_ndis_load="YES" and ndis_load="YES" as well Now the loader will suck the additional file into memory as a .ko. The phony .ko has two symbols in it: filename_start and filename_end, which are generated by objcopy(1). ndis_open_file() will traverse each module in the module list looking for these symbols and, if it finds them, it'll use them to generate the file mapping address and length values that the caller of NdisOpenFile() wants. As a bonus, this will even work if the file has been statically linked into the kernel itself, since the "kernel" module is searched too. (ndiscvt(8) will generate both filename.o and filename.ko for you). - Modify the mechanism used to provide make-pretend FASTCALL support. Rather than using inline assembly to yank the first two arguments out of %ecx and %edx, we now use the __regparm__(3) attribute (and the __stdcall__ attribute) and use some macro magic to re-order the arguments and provide dummy arguments as needed so that the arguments passed in registers end up in the right place. Change taken from DragonflyBSD version of the NDISulator.
2004-08-01 20:04:31 +00:00
Turning the
.Tn Windows\[rg]
driver image directly into an object code file saves disk space
and compilation time.
.It Fl f Ar firmfile
A few NDIS drivers come with additional files that the core
2005-01-11 11:47:22 +00:00
driver module will load during initialization time.
Typically,
Big mess 'o changes: - Give ndiscvt(8) the ability to process a .SYS file directly into a .o file so that we don't have to emit big messy char arrays into the ndis_driver_data.h file. This behavior is currently optional, but may become the default some day. - Give ndiscvt(8) the ability to turn arbitrary files into .ko files so that they can be pre-loaded or kldloaded. (Both this and the previous change involve using objcopy(1)). - Give NdisOpenFile() the ability to 'read' files out of kernel memory that have been kldloaded or pre-loaded, and disallow the use of the normal vn_open() file opening method during bootstrap (when no filesystems have been mounted yet). Some people have reported that kldloading if_ndis.ko works fine when the system is running multiuser but causes a panic when the modile is pre-loaded by /boot/loader. This happens with drivers that need to use NdisOpenFile() to access external files (i.e. firmware images). NdisOpenFile() won't work during kernel bootstrapping because no filesystems have been mounted. To get around this, you can now do the following: o Say you have a firmware file called firmware.img o Do: ndiscvt -f firmware.img -- this creates firmware.img.ko o Put the firmware.img.ko in /boot/kernel o add firmware.img_load="YES" in /boot/loader.conf o add if_ndis_load="YES" and ndis_load="YES" as well Now the loader will suck the additional file into memory as a .ko. The phony .ko has two symbols in it: filename_start and filename_end, which are generated by objcopy(1). ndis_open_file() will traverse each module in the module list looking for these symbols and, if it finds them, it'll use them to generate the file mapping address and length values that the caller of NdisOpenFile() wants. As a bonus, this will even work if the file has been statically linked into the kernel itself, since the "kernel" module is searched too. (ndiscvt(8) will generate both filename.o and filename.ko for you). - Modify the mechanism used to provide make-pretend FASTCALL support. Rather than using inline assembly to yank the first two arguments out of %ecx and %edx, we now use the __regparm__(3) attribute (and the __stdcall__ attribute) and use some macro magic to re-order the arguments and provide dummy arguments as needed so that the arguments passed in registers end up in the right place. Change taken from DragonflyBSD version of the NDISulator.
2004-08-01 20:04:31 +00:00
these files contain firmware which the driver will transfer to
2005-01-11 11:47:22 +00:00
the device in order to make it fully operational.
In
Big mess 'o changes: - Give ndiscvt(8) the ability to process a .SYS file directly into a .o file so that we don't have to emit big messy char arrays into the ndis_driver_data.h file. This behavior is currently optional, but may become the default some day. - Give ndiscvt(8) the ability to turn arbitrary files into .ko files so that they can be pre-loaded or kldloaded. (Both this and the previous change involve using objcopy(1)). - Give NdisOpenFile() the ability to 'read' files out of kernel memory that have been kldloaded or pre-loaded, and disallow the use of the normal vn_open() file opening method during bootstrap (when no filesystems have been mounted yet). Some people have reported that kldloading if_ndis.ko works fine when the system is running multiuser but causes a panic when the modile is pre-loaded by /boot/loader. This happens with drivers that need to use NdisOpenFile() to access external files (i.e. firmware images). NdisOpenFile() won't work during kernel bootstrapping because no filesystems have been mounted. To get around this, you can now do the following: o Say you have a firmware file called firmware.img o Do: ndiscvt -f firmware.img -- this creates firmware.img.ko o Put the firmware.img.ko in /boot/kernel o add firmware.img_load="YES" in /boot/loader.conf o add if_ndis_load="YES" and ndis_load="YES" as well Now the loader will suck the additional file into memory as a .ko. The phony .ko has two symbols in it: filename_start and filename_end, which are generated by objcopy(1). ndis_open_file() will traverse each module in the module list looking for these symbols and, if it finds them, it'll use them to generate the file mapping address and length values that the caller of NdisOpenFile() wants. As a bonus, this will even work if the file has been statically linked into the kernel itself, since the "kernel" module is searched too. (ndiscvt(8) will generate both filename.o and filename.ko for you). - Modify the mechanism used to provide make-pretend FASTCALL support. Rather than using inline assembly to yank the first two arguments out of %ecx and %edx, we now use the __regparm__(3) attribute (and the __stdcall__ attribute) and use some macro magic to re-order the arguments and provide dummy arguments as needed so that the arguments passed in registers end up in the right place. Change taken from DragonflyBSD version of the NDISulator.
2004-08-01 20:04:31 +00:00
.Tn Windows\[rg] ,
these files are usually just copied into one of the system
directories along with the driver itself.
.Pp
In
.Fx
2005-01-11 11:47:22 +00:00
there are two mechanism for loading these files.
If the driver
Big mess 'o changes: - Give ndiscvt(8) the ability to process a .SYS file directly into a .o file so that we don't have to emit big messy char arrays into the ndis_driver_data.h file. This behavior is currently optional, but may become the default some day. - Give ndiscvt(8) the ability to turn arbitrary files into .ko files so that they can be pre-loaded or kldloaded. (Both this and the previous change involve using objcopy(1)). - Give NdisOpenFile() the ability to 'read' files out of kernel memory that have been kldloaded or pre-loaded, and disallow the use of the normal vn_open() file opening method during bootstrap (when no filesystems have been mounted yet). Some people have reported that kldloading if_ndis.ko works fine when the system is running multiuser but causes a panic when the modile is pre-loaded by /boot/loader. This happens with drivers that need to use NdisOpenFile() to access external files (i.e. firmware images). NdisOpenFile() won't work during kernel bootstrapping because no filesystems have been mounted. To get around this, you can now do the following: o Say you have a firmware file called firmware.img o Do: ndiscvt -f firmware.img -- this creates firmware.img.ko o Put the firmware.img.ko in /boot/kernel o add firmware.img_load="YES" in /boot/loader.conf o add if_ndis_load="YES" and ndis_load="YES" as well Now the loader will suck the additional file into memory as a .ko. The phony .ko has two symbols in it: filename_start and filename_end, which are generated by objcopy(1). ndis_open_file() will traverse each module in the module list looking for these symbols and, if it finds them, it'll use them to generate the file mapping address and length values that the caller of NdisOpenFile() wants. As a bonus, this will even work if the file has been statically linked into the kernel itself, since the "kernel" module is searched too. (ndiscvt(8) will generate both filename.o and filename.ko for you). - Modify the mechanism used to provide make-pretend FASTCALL support. Rather than using inline assembly to yank the first two arguments out of %ecx and %edx, we now use the __regparm__(3) attribute (and the __stdcall__ attribute) and use some macro magic to re-order the arguments and provide dummy arguments as needed so that the arguments passed in registers end up in the right place. Change taken from DragonflyBSD version of the NDISulator.
2004-08-01 20:04:31 +00:00
is built as a loadable kernel module which is loaded after the
kernel has finished booting
2005-01-11 11:47:22 +00:00
(and after the root file system has
been mounted),
Big mess 'o changes: - Give ndiscvt(8) the ability to process a .SYS file directly into a .o file so that we don't have to emit big messy char arrays into the ndis_driver_data.h file. This behavior is currently optional, but may become the default some day. - Give ndiscvt(8) the ability to turn arbitrary files into .ko files so that they can be pre-loaded or kldloaded. (Both this and the previous change involve using objcopy(1)). - Give NdisOpenFile() the ability to 'read' files out of kernel memory that have been kldloaded or pre-loaded, and disallow the use of the normal vn_open() file opening method during bootstrap (when no filesystems have been mounted yet). Some people have reported that kldloading if_ndis.ko works fine when the system is running multiuser but causes a panic when the modile is pre-loaded by /boot/loader. This happens with drivers that need to use NdisOpenFile() to access external files (i.e. firmware images). NdisOpenFile() won't work during kernel bootstrapping because no filesystems have been mounted. To get around this, you can now do the following: o Say you have a firmware file called firmware.img o Do: ndiscvt -f firmware.img -- this creates firmware.img.ko o Put the firmware.img.ko in /boot/kernel o add firmware.img_load="YES" in /boot/loader.conf o add if_ndis_load="YES" and ndis_load="YES" as well Now the loader will suck the additional file into memory as a .ko. The phony .ko has two symbols in it: filename_start and filename_end, which are generated by objcopy(1). ndis_open_file() will traverse each module in the module list looking for these symbols and, if it finds them, it'll use them to generate the file mapping address and length values that the caller of NdisOpenFile() wants. As a bonus, this will even work if the file has been statically linked into the kernel itself, since the "kernel" module is searched too. (ndiscvt(8) will generate both filename.o and filename.ko for you). - Modify the mechanism used to provide make-pretend FASTCALL support. Rather than using inline assembly to yank the first two arguments out of %ecx and %edx, we now use the __regparm__(3) attribute (and the __stdcall__ attribute) and use some macro magic to re-order the arguments and provide dummy arguments as needed so that the arguments passed in registers end up in the right place. Change taken from DragonflyBSD version of the NDISulator.
2004-08-01 20:04:31 +00:00
the extra files can simply be copied to the
.Pa /compat/ndis
directory, and they will be loaded into the kernel on demand when the
2012-06-03 11:29:48 +00:00
driver needs them.
Big mess 'o changes: - Give ndiscvt(8) the ability to process a .SYS file directly into a .o file so that we don't have to emit big messy char arrays into the ndis_driver_data.h file. This behavior is currently optional, but may become the default some day. - Give ndiscvt(8) the ability to turn arbitrary files into .ko files so that they can be pre-loaded or kldloaded. (Both this and the previous change involve using objcopy(1)). - Give NdisOpenFile() the ability to 'read' files out of kernel memory that have been kldloaded or pre-loaded, and disallow the use of the normal vn_open() file opening method during bootstrap (when no filesystems have been mounted yet). Some people have reported that kldloading if_ndis.ko works fine when the system is running multiuser but causes a panic when the modile is pre-loaded by /boot/loader. This happens with drivers that need to use NdisOpenFile() to access external files (i.e. firmware images). NdisOpenFile() won't work during kernel bootstrapping because no filesystems have been mounted. To get around this, you can now do the following: o Say you have a firmware file called firmware.img o Do: ndiscvt -f firmware.img -- this creates firmware.img.ko o Put the firmware.img.ko in /boot/kernel o add firmware.img_load="YES" in /boot/loader.conf o add if_ndis_load="YES" and ndis_load="YES" as well Now the loader will suck the additional file into memory as a .ko. The phony .ko has two symbols in it: filename_start and filename_end, which are generated by objcopy(1). ndis_open_file() will traverse each module in the module list looking for these symbols and, if it finds them, it'll use them to generate the file mapping address and length values that the caller of NdisOpenFile() wants. As a bonus, this will even work if the file has been statically linked into the kernel itself, since the "kernel" module is searched too. (ndiscvt(8) will generate both filename.o and filename.ko for you). - Modify the mechanism used to provide make-pretend FASTCALL support. Rather than using inline assembly to yank the first two arguments out of %ecx and %edx, we now use the __regparm__(3) attribute (and the __stdcall__ attribute) and use some macro magic to re-order the arguments and provide dummy arguments as needed so that the arguments passed in registers end up in the right place. Change taken from DragonflyBSD version of the NDISulator.
2004-08-01 20:04:31 +00:00
.Pp
If however the driver is required to bootstrap the system
2005-01-11 11:47:22 +00:00
(i.e., if
Big mess 'o changes: - Give ndiscvt(8) the ability to process a .SYS file directly into a .o file so that we don't have to emit big messy char arrays into the ndis_driver_data.h file. This behavior is currently optional, but may become the default some day. - Give ndiscvt(8) the ability to turn arbitrary files into .ko files so that they can be pre-loaded or kldloaded. (Both this and the previous change involve using objcopy(1)). - Give NdisOpenFile() the ability to 'read' files out of kernel memory that have been kldloaded or pre-loaded, and disallow the use of the normal vn_open() file opening method during bootstrap (when no filesystems have been mounted yet). Some people have reported that kldloading if_ndis.ko works fine when the system is running multiuser but causes a panic when the modile is pre-loaded by /boot/loader. This happens with drivers that need to use NdisOpenFile() to access external files (i.e. firmware images). NdisOpenFile() won't work during kernel bootstrapping because no filesystems have been mounted. To get around this, you can now do the following: o Say you have a firmware file called firmware.img o Do: ndiscvt -f firmware.img -- this creates firmware.img.ko o Put the firmware.img.ko in /boot/kernel o add firmware.img_load="YES" in /boot/loader.conf o add if_ndis_load="YES" and ndis_load="YES" as well Now the loader will suck the additional file into memory as a .ko. The phony .ko has two symbols in it: filename_start and filename_end, which are generated by objcopy(1). ndis_open_file() will traverse each module in the module list looking for these symbols and, if it finds them, it'll use them to generate the file mapping address and length values that the caller of NdisOpenFile() wants. As a bonus, this will even work if the file has been statically linked into the kernel itself, since the "kernel" module is searched too. (ndiscvt(8) will generate both filename.o and filename.ko for you). - Modify the mechanism used to provide make-pretend FASTCALL support. Rather than using inline assembly to yank the first two arguments out of %ecx and %edx, we now use the __regparm__(3) attribute (and the __stdcall__ attribute) and use some macro magic to re-order the arguments and provide dummy arguments as needed so that the arguments passed in registers end up in the right place. Change taken from DragonflyBSD version of the NDISulator.
2004-08-01 20:04:31 +00:00
the NDIS-based network interface is to be used for diskless/PXE
2005-01-11 11:47:22 +00:00
booting),
Big mess 'o changes: - Give ndiscvt(8) the ability to process a .SYS file directly into a .o file so that we don't have to emit big messy char arrays into the ndis_driver_data.h file. This behavior is currently optional, but may become the default some day. - Give ndiscvt(8) the ability to turn arbitrary files into .ko files so that they can be pre-loaded or kldloaded. (Both this and the previous change involve using objcopy(1)). - Give NdisOpenFile() the ability to 'read' files out of kernel memory that have been kldloaded or pre-loaded, and disallow the use of the normal vn_open() file opening method during bootstrap (when no filesystems have been mounted yet). Some people have reported that kldloading if_ndis.ko works fine when the system is running multiuser but causes a panic when the modile is pre-loaded by /boot/loader. This happens with drivers that need to use NdisOpenFile() to access external files (i.e. firmware images). NdisOpenFile() won't work during kernel bootstrapping because no filesystems have been mounted. To get around this, you can now do the following: o Say you have a firmware file called firmware.img o Do: ndiscvt -f firmware.img -- this creates firmware.img.ko o Put the firmware.img.ko in /boot/kernel o add firmware.img_load="YES" in /boot/loader.conf o add if_ndis_load="YES" and ndis_load="YES" as well Now the loader will suck the additional file into memory as a .ko. The phony .ko has two symbols in it: filename_start and filename_end, which are generated by objcopy(1). ndis_open_file() will traverse each module in the module list looking for these symbols and, if it finds them, it'll use them to generate the file mapping address and length values that the caller of NdisOpenFile() wants. As a bonus, this will even work if the file has been statically linked into the kernel itself, since the "kernel" module is searched too. (ndiscvt(8) will generate both filename.o and filename.ko for you). - Modify the mechanism used to provide make-pretend FASTCALL support. Rather than using inline assembly to yank the first two arguments out of %ecx and %edx, we now use the __regparm__(3) attribute (and the __stdcall__ attribute) and use some macro magic to re-order the arguments and provide dummy arguments as needed so that the arguments passed in registers end up in the right place. Change taken from DragonflyBSD version of the NDISulator.
2004-08-01 20:04:31 +00:00
the files need to be pre-loaded by the bootstrap
loader in order to be accessible, since the driver will need them
2005-01-11 11:47:22 +00:00
before the root file system has been mounted.
However, the bootstrap
Big mess 'o changes: - Give ndiscvt(8) the ability to process a .SYS file directly into a .o file so that we don't have to emit big messy char arrays into the ndis_driver_data.h file. This behavior is currently optional, but may become the default some day. - Give ndiscvt(8) the ability to turn arbitrary files into .ko files so that they can be pre-loaded or kldloaded. (Both this and the previous change involve using objcopy(1)). - Give NdisOpenFile() the ability to 'read' files out of kernel memory that have been kldloaded or pre-loaded, and disallow the use of the normal vn_open() file opening method during bootstrap (when no filesystems have been mounted yet). Some people have reported that kldloading if_ndis.ko works fine when the system is running multiuser but causes a panic when the modile is pre-loaded by /boot/loader. This happens with drivers that need to use NdisOpenFile() to access external files (i.e. firmware images). NdisOpenFile() won't work during kernel bootstrapping because no filesystems have been mounted. To get around this, you can now do the following: o Say you have a firmware file called firmware.img o Do: ndiscvt -f firmware.img -- this creates firmware.img.ko o Put the firmware.img.ko in /boot/kernel o add firmware.img_load="YES" in /boot/loader.conf o add if_ndis_load="YES" and ndis_load="YES" as well Now the loader will suck the additional file into memory as a .ko. The phony .ko has two symbols in it: filename_start and filename_end, which are generated by objcopy(1). ndis_open_file() will traverse each module in the module list looking for these symbols and, if it finds them, it'll use them to generate the file mapping address and length values that the caller of NdisOpenFile() wants. As a bonus, this will even work if the file has been statically linked into the kernel itself, since the "kernel" module is searched too. (ndiscvt(8) will generate both filename.o and filename.ko for you). - Modify the mechanism used to provide make-pretend FASTCALL support. Rather than using inline assembly to yank the first two arguments out of %ecx and %edx, we now use the __regparm__(3) attribute (and the __stdcall__ attribute) and use some macro magic to re-order the arguments and provide dummy arguments as needed so that the arguments passed in registers end up in the right place. Change taken from DragonflyBSD version of the NDISulator.
2004-08-01 20:04:31 +00:00
loader is only able to load files that are shared
.Fx
binary objects.
.Pp
The
.Fl f
flag can be used to convert an arbitrary file
.Ar firmfile
into shared object format
2005-01-11 11:47:22 +00:00
(the actual conversion is done using
Big mess 'o changes: - Give ndiscvt(8) the ability to process a .SYS file directly into a .o file so that we don't have to emit big messy char arrays into the ndis_driver_data.h file. This behavior is currently optional, but may become the default some day. - Give ndiscvt(8) the ability to turn arbitrary files into .ko files so that they can be pre-loaded or kldloaded. (Both this and the previous change involve using objcopy(1)). - Give NdisOpenFile() the ability to 'read' files out of kernel memory that have been kldloaded or pre-loaded, and disallow the use of the normal vn_open() file opening method during bootstrap (when no filesystems have been mounted yet). Some people have reported that kldloading if_ndis.ko works fine when the system is running multiuser but causes a panic when the modile is pre-loaded by /boot/loader. This happens with drivers that need to use NdisOpenFile() to access external files (i.e. firmware images). NdisOpenFile() won't work during kernel bootstrapping because no filesystems have been mounted. To get around this, you can now do the following: o Say you have a firmware file called firmware.img o Do: ndiscvt -f firmware.img -- this creates firmware.img.ko o Put the firmware.img.ko in /boot/kernel o add firmware.img_load="YES" in /boot/loader.conf o add if_ndis_load="YES" and ndis_load="YES" as well Now the loader will suck the additional file into memory as a .ko. The phony .ko has two symbols in it: filename_start and filename_end, which are generated by objcopy(1). ndis_open_file() will traverse each module in the module list looking for these symbols and, if it finds them, it'll use them to generate the file mapping address and length values that the caller of NdisOpenFile() wants. As a bonus, this will even work if the file has been statically linked into the kernel itself, since the "kernel" module is searched too. (ndiscvt(8) will generate both filename.o and filename.ko for you). - Modify the mechanism used to provide make-pretend FASTCALL support. Rather than using inline assembly to yank the first two arguments out of %ecx and %edx, we now use the __regparm__(3) attribute (and the __stdcall__ attribute) and use some macro magic to re-order the arguments and provide dummy arguments as needed so that the arguments passed in registers end up in the right place. Change taken from DragonflyBSD version of the NDISulator.
2004-08-01 20:04:31 +00:00
the
.Xr objcopy 1
and
.Xr ld 1
2005-01-11 11:47:22 +00:00
commands).
Big mess 'o changes: - Give ndiscvt(8) the ability to process a .SYS file directly into a .o file so that we don't have to emit big messy char arrays into the ndis_driver_data.h file. This behavior is currently optional, but may become the default some day. - Give ndiscvt(8) the ability to turn arbitrary files into .ko files so that they can be pre-loaded or kldloaded. (Both this and the previous change involve using objcopy(1)). - Give NdisOpenFile() the ability to 'read' files out of kernel memory that have been kldloaded or pre-loaded, and disallow the use of the normal vn_open() file opening method during bootstrap (when no filesystems have been mounted yet). Some people have reported that kldloading if_ndis.ko works fine when the system is running multiuser but causes a panic when the modile is pre-loaded by /boot/loader. This happens with drivers that need to use NdisOpenFile() to access external files (i.e. firmware images). NdisOpenFile() won't work during kernel bootstrapping because no filesystems have been mounted. To get around this, you can now do the following: o Say you have a firmware file called firmware.img o Do: ndiscvt -f firmware.img -- this creates firmware.img.ko o Put the firmware.img.ko in /boot/kernel o add firmware.img_load="YES" in /boot/loader.conf o add if_ndis_load="YES" and ndis_load="YES" as well Now the loader will suck the additional file into memory as a .ko. The phony .ko has two symbols in it: filename_start and filename_end, which are generated by objcopy(1). ndis_open_file() will traverse each module in the module list looking for these symbols and, if it finds them, it'll use them to generate the file mapping address and length values that the caller of NdisOpenFile() wants. As a bonus, this will even work if the file has been statically linked into the kernel itself, since the "kernel" module is searched too. (ndiscvt(8) will generate both filename.o and filename.ko for you). - Modify the mechanism used to provide make-pretend FASTCALL support. Rather than using inline assembly to yank the first two arguments out of %ecx and %edx, we now use the __regparm__(3) attribute (and the __stdcall__ attribute) and use some macro magic to re-order the arguments and provide dummy arguments as needed so that the arguments passed in registers end up in the right place. Change taken from DragonflyBSD version of the NDISulator.
2004-08-01 20:04:31 +00:00
The resulting files can then be copied to the
.Pa /boot/kernel
directory, and can be pre-loaded directly from the boot loader
prompt, or automatically by editing the
.Xr loader.conf 5
2005-01-11 11:47:22 +00:00
file.
If desired, the files can also be loaded into memory
Big mess 'o changes: - Give ndiscvt(8) the ability to process a .SYS file directly into a .o file so that we don't have to emit big messy char arrays into the ndis_driver_data.h file. This behavior is currently optional, but may become the default some day. - Give ndiscvt(8) the ability to turn arbitrary files into .ko files so that they can be pre-loaded or kldloaded. (Both this and the previous change involve using objcopy(1)). - Give NdisOpenFile() the ability to 'read' files out of kernel memory that have been kldloaded or pre-loaded, and disallow the use of the normal vn_open() file opening method during bootstrap (when no filesystems have been mounted yet). Some people have reported that kldloading if_ndis.ko works fine when the system is running multiuser but causes a panic when the modile is pre-loaded by /boot/loader. This happens with drivers that need to use NdisOpenFile() to access external files (i.e. firmware images). NdisOpenFile() won't work during kernel bootstrapping because no filesystems have been mounted. To get around this, you can now do the following: o Say you have a firmware file called firmware.img o Do: ndiscvt -f firmware.img -- this creates firmware.img.ko o Put the firmware.img.ko in /boot/kernel o add firmware.img_load="YES" in /boot/loader.conf o add if_ndis_load="YES" and ndis_load="YES" as well Now the loader will suck the additional file into memory as a .ko. The phony .ko has two symbols in it: filename_start and filename_end, which are generated by objcopy(1). ndis_open_file() will traverse each module in the module list looking for these symbols and, if it finds them, it'll use them to generate the file mapping address and length values that the caller of NdisOpenFile() wants. As a bonus, this will even work if the file has been statically linked into the kernel itself, since the "kernel" module is searched too. (ndiscvt(8) will generate both filename.o and filename.ko for you). - Modify the mechanism used to provide make-pretend FASTCALL support. Rather than using inline assembly to yank the first two arguments out of %ecx and %edx, we now use the __regparm__(3) attribute (and the __stdcall__ attribute) and use some macro magic to re-order the arguments and provide dummy arguments as needed so that the arguments passed in registers end up in the right place. Change taken from DragonflyBSD version of the NDISulator.
2004-08-01 20:04:31 +00:00
at runtime using the
.Xr kldload 8
command.
.Pp
When an NDIS driver tries to open an external file, the
.Xr ndisapi 9
code will first search for a loaded kernel module that matches the
name specified in the open request, and if that fails, it will then
try to open the file from the
.Pa /compat/ndis
2005-01-11 11:47:22 +00:00
directory as well.
Note that during kernel bootstrap, the ability
Big mess 'o changes: - Give ndiscvt(8) the ability to process a .SYS file directly into a .o file so that we don't have to emit big messy char arrays into the ndis_driver_data.h file. This behavior is currently optional, but may become the default some day. - Give ndiscvt(8) the ability to turn arbitrary files into .ko files so that they can be pre-loaded or kldloaded. (Both this and the previous change involve using objcopy(1)). - Give NdisOpenFile() the ability to 'read' files out of kernel memory that have been kldloaded or pre-loaded, and disallow the use of the normal vn_open() file opening method during bootstrap (when no filesystems have been mounted yet). Some people have reported that kldloading if_ndis.ko works fine when the system is running multiuser but causes a panic when the modile is pre-loaded by /boot/loader. This happens with drivers that need to use NdisOpenFile() to access external files (i.e. firmware images). NdisOpenFile() won't work during kernel bootstrapping because no filesystems have been mounted. To get around this, you can now do the following: o Say you have a firmware file called firmware.img o Do: ndiscvt -f firmware.img -- this creates firmware.img.ko o Put the firmware.img.ko in /boot/kernel o add firmware.img_load="YES" in /boot/loader.conf o add if_ndis_load="YES" and ndis_load="YES" as well Now the loader will suck the additional file into memory as a .ko. The phony .ko has two symbols in it: filename_start and filename_end, which are generated by objcopy(1). ndis_open_file() will traverse each module in the module list looking for these symbols and, if it finds them, it'll use them to generate the file mapping address and length values that the caller of NdisOpenFile() wants. As a bonus, this will even work if the file has been statically linked into the kernel itself, since the "kernel" module is searched too. (ndiscvt(8) will generate both filename.o and filename.ko for you). - Modify the mechanism used to provide make-pretend FASTCALL support. Rather than using inline assembly to yank the first two arguments out of %ecx and %edx, we now use the __regparm__(3) attribute (and the __stdcall__ attribute) and use some macro magic to re-order the arguments and provide dummy arguments as needed so that the arguments passed in registers end up in the right place. Change taken from DragonflyBSD version of the NDISulator.
2004-08-01 20:04:31 +00:00
to open files from
.Pa /compat/ndis
is disabled: only the module search will be performed.
.Pp
When using the
.Fl f
flag,
.Nm
will generate both a relocatable object file
2005-01-11 11:47:22 +00:00
(with a
Big mess 'o changes: - Give ndiscvt(8) the ability to process a .SYS file directly into a .o file so that we don't have to emit big messy char arrays into the ndis_driver_data.h file. This behavior is currently optional, but may become the default some day. - Give ndiscvt(8) the ability to turn arbitrary files into .ko files so that they can be pre-loaded or kldloaded. (Both this and the previous change involve using objcopy(1)). - Give NdisOpenFile() the ability to 'read' files out of kernel memory that have been kldloaded or pre-loaded, and disallow the use of the normal vn_open() file opening method during bootstrap (when no filesystems have been mounted yet). Some people have reported that kldloading if_ndis.ko works fine when the system is running multiuser but causes a panic when the modile is pre-loaded by /boot/loader. This happens with drivers that need to use NdisOpenFile() to access external files (i.e. firmware images). NdisOpenFile() won't work during kernel bootstrapping because no filesystems have been mounted. To get around this, you can now do the following: o Say you have a firmware file called firmware.img o Do: ndiscvt -f firmware.img -- this creates firmware.img.ko o Put the firmware.img.ko in /boot/kernel o add firmware.img_load="YES" in /boot/loader.conf o add if_ndis_load="YES" and ndis_load="YES" as well Now the loader will suck the additional file into memory as a .ko. The phony .ko has two symbols in it: filename_start and filename_end, which are generated by objcopy(1). ndis_open_file() will traverse each module in the module list looking for these symbols and, if it finds them, it'll use them to generate the file mapping address and length values that the caller of NdisOpenFile() wants. As a bonus, this will even work if the file has been statically linked into the kernel itself, since the "kernel" module is searched too. (ndiscvt(8) will generate both filename.o and filename.ko for you). - Modify the mechanism used to provide make-pretend FASTCALL support. Rather than using inline assembly to yank the first two arguments out of %ecx and %edx, we now use the __regparm__(3) attribute (and the __stdcall__ attribute) and use some macro magic to re-order the arguments and provide dummy arguments as needed so that the arguments passed in registers end up in the right place. Change taken from DragonflyBSD version of the NDISulator.
2004-08-01 20:04:31 +00:00
.Pa .o
2005-01-11 11:47:22 +00:00
extension)
Big mess 'o changes: - Give ndiscvt(8) the ability to process a .SYS file directly into a .o file so that we don't have to emit big messy char arrays into the ndis_driver_data.h file. This behavior is currently optional, but may become the default some day. - Give ndiscvt(8) the ability to turn arbitrary files into .ko files so that they can be pre-loaded or kldloaded. (Both this and the previous change involve using objcopy(1)). - Give NdisOpenFile() the ability to 'read' files out of kernel memory that have been kldloaded or pre-loaded, and disallow the use of the normal vn_open() file opening method during bootstrap (when no filesystems have been mounted yet). Some people have reported that kldloading if_ndis.ko works fine when the system is running multiuser but causes a panic when the modile is pre-loaded by /boot/loader. This happens with drivers that need to use NdisOpenFile() to access external files (i.e. firmware images). NdisOpenFile() won't work during kernel bootstrapping because no filesystems have been mounted. To get around this, you can now do the following: o Say you have a firmware file called firmware.img o Do: ndiscvt -f firmware.img -- this creates firmware.img.ko o Put the firmware.img.ko in /boot/kernel o add firmware.img_load="YES" in /boot/loader.conf o add if_ndis_load="YES" and ndis_load="YES" as well Now the loader will suck the additional file into memory as a .ko. The phony .ko has two symbols in it: filename_start and filename_end, which are generated by objcopy(1). ndis_open_file() will traverse each module in the module list looking for these symbols and, if it finds them, it'll use them to generate the file mapping address and length values that the caller of NdisOpenFile() wants. As a bonus, this will even work if the file has been statically linked into the kernel itself, since the "kernel" module is searched too. (ndiscvt(8) will generate both filename.o and filename.ko for you). - Modify the mechanism used to provide make-pretend FASTCALL support. Rather than using inline assembly to yank the first two arguments out of %ecx and %edx, we now use the __regparm__(3) attribute (and the __stdcall__ attribute) and use some macro magic to re-order the arguments and provide dummy arguments as needed so that the arguments passed in registers end up in the right place. Change taken from DragonflyBSD version of the NDISulator.
2004-08-01 20:04:31 +00:00
and a shared object file
2005-01-11 11:47:22 +00:00
(with a
Big mess 'o changes: - Give ndiscvt(8) the ability to process a .SYS file directly into a .o file so that we don't have to emit big messy char arrays into the ndis_driver_data.h file. This behavior is currently optional, but may become the default some day. - Give ndiscvt(8) the ability to turn arbitrary files into .ko files so that they can be pre-loaded or kldloaded. (Both this and the previous change involve using objcopy(1)). - Give NdisOpenFile() the ability to 'read' files out of kernel memory that have been kldloaded or pre-loaded, and disallow the use of the normal vn_open() file opening method during bootstrap (when no filesystems have been mounted yet). Some people have reported that kldloading if_ndis.ko works fine when the system is running multiuser but causes a panic when the modile is pre-loaded by /boot/loader. This happens with drivers that need to use NdisOpenFile() to access external files (i.e. firmware images). NdisOpenFile() won't work during kernel bootstrapping because no filesystems have been mounted. To get around this, you can now do the following: o Say you have a firmware file called firmware.img o Do: ndiscvt -f firmware.img -- this creates firmware.img.ko o Put the firmware.img.ko in /boot/kernel o add firmware.img_load="YES" in /boot/loader.conf o add if_ndis_load="YES" and ndis_load="YES" as well Now the loader will suck the additional file into memory as a .ko. The phony .ko has two symbols in it: filename_start and filename_end, which are generated by objcopy(1). ndis_open_file() will traverse each module in the module list looking for these symbols and, if it finds them, it'll use them to generate the file mapping address and length values that the caller of NdisOpenFile() wants. As a bonus, this will even work if the file has been statically linked into the kernel itself, since the "kernel" module is searched too. (ndiscvt(8) will generate both filename.o and filename.ko for you). - Modify the mechanism used to provide make-pretend FASTCALL support. Rather than using inline assembly to yank the first two arguments out of %ecx and %edx, we now use the __regparm__(3) attribute (and the __stdcall__ attribute) and use some macro magic to re-order the arguments and provide dummy arguments as needed so that the arguments passed in registers end up in the right place. Change taken from DragonflyBSD version of the NDISulator.
2004-08-01 20:04:31 +00:00
.Pa .ko
2005-01-11 11:47:22 +00:00
extension).
The shared object is the one that should be placed in
Big mess 'o changes: - Give ndiscvt(8) the ability to process a .SYS file directly into a .o file so that we don't have to emit big messy char arrays into the ndis_driver_data.h file. This behavior is currently optional, but may become the default some day. - Give ndiscvt(8) the ability to turn arbitrary files into .ko files so that they can be pre-loaded or kldloaded. (Both this and the previous change involve using objcopy(1)). - Give NdisOpenFile() the ability to 'read' files out of kernel memory that have been kldloaded or pre-loaded, and disallow the use of the normal vn_open() file opening method during bootstrap (when no filesystems have been mounted yet). Some people have reported that kldloading if_ndis.ko works fine when the system is running multiuser but causes a panic when the modile is pre-loaded by /boot/loader. This happens with drivers that need to use NdisOpenFile() to access external files (i.e. firmware images). NdisOpenFile() won't work during kernel bootstrapping because no filesystems have been mounted. To get around this, you can now do the following: o Say you have a firmware file called firmware.img o Do: ndiscvt -f firmware.img -- this creates firmware.img.ko o Put the firmware.img.ko in /boot/kernel o add firmware.img_load="YES" in /boot/loader.conf o add if_ndis_load="YES" and ndis_load="YES" as well Now the loader will suck the additional file into memory as a .ko. The phony .ko has two symbols in it: filename_start and filename_end, which are generated by objcopy(1). ndis_open_file() will traverse each module in the module list looking for these symbols and, if it finds them, it'll use them to generate the file mapping address and length values that the caller of NdisOpenFile() wants. As a bonus, this will even work if the file has been statically linked into the kernel itself, since the "kernel" module is searched too. (ndiscvt(8) will generate both filename.o and filename.ko for you). - Modify the mechanism used to provide make-pretend FASTCALL support. Rather than using inline assembly to yank the first two arguments out of %ecx and %edx, we now use the __regparm__(3) attribute (and the __stdcall__ attribute) and use some macro magic to re-order the arguments and provide dummy arguments as needed so that the arguments passed in registers end up in the right place. Change taken from DragonflyBSD version of the NDISulator.
2004-08-01 20:04:31 +00:00
the
.Pa /boot/kernel
2005-01-11 11:47:22 +00:00
directory.
The relocatable object file is useful if the user wishes
Big mess 'o changes: - Give ndiscvt(8) the ability to process a .SYS file directly into a .o file so that we don't have to emit big messy char arrays into the ndis_driver_data.h file. This behavior is currently optional, but may become the default some day. - Give ndiscvt(8) the ability to turn arbitrary files into .ko files so that they can be pre-loaded or kldloaded. (Both this and the previous change involve using objcopy(1)). - Give NdisOpenFile() the ability to 'read' files out of kernel memory that have been kldloaded or pre-loaded, and disallow the use of the normal vn_open() file opening method during bootstrap (when no filesystems have been mounted yet). Some people have reported that kldloading if_ndis.ko works fine when the system is running multiuser but causes a panic when the modile is pre-loaded by /boot/loader. This happens with drivers that need to use NdisOpenFile() to access external files (i.e. firmware images). NdisOpenFile() won't work during kernel bootstrapping because no filesystems have been mounted. To get around this, you can now do the following: o Say you have a firmware file called firmware.img o Do: ndiscvt -f firmware.img -- this creates firmware.img.ko o Put the firmware.img.ko in /boot/kernel o add firmware.img_load="YES" in /boot/loader.conf o add if_ndis_load="YES" and ndis_load="YES" as well Now the loader will suck the additional file into memory as a .ko. The phony .ko has two symbols in it: filename_start and filename_end, which are generated by objcopy(1). ndis_open_file() will traverse each module in the module list looking for these symbols and, if it finds them, it'll use them to generate the file mapping address and length values that the caller of NdisOpenFile() wants. As a bonus, this will even work if the file has been statically linked into the kernel itself, since the "kernel" module is searched too. (ndiscvt(8) will generate both filename.o and filename.ko for you). - Modify the mechanism used to provide make-pretend FASTCALL support. Rather than using inline assembly to yank the first two arguments out of %ecx and %edx, we now use the __regparm__(3) attribute (and the __stdcall__ attribute) and use some macro magic to re-order the arguments and provide dummy arguments as needed so that the arguments passed in registers end up in the right place. Change taken from DragonflyBSD version of the NDISulator.
2004-08-01 20:04:31 +00:00
to create a completely static kernel image: the object file can be
2005-01-11 11:47:22 +00:00
linked into the kernel directly along with the driver itself.
Some
Big mess 'o changes: - Give ndiscvt(8) the ability to process a .SYS file directly into a .o file so that we don't have to emit big messy char arrays into the ndis_driver_data.h file. This behavior is currently optional, but may become the default some day. - Give ndiscvt(8) the ability to turn arbitrary files into .ko files so that they can be pre-loaded or kldloaded. (Both this and the previous change involve using objcopy(1)). - Give NdisOpenFile() the ability to 'read' files out of kernel memory that have been kldloaded or pre-loaded, and disallow the use of the normal vn_open() file opening method during bootstrap (when no filesystems have been mounted yet). Some people have reported that kldloading if_ndis.ko works fine when the system is running multiuser but causes a panic when the modile is pre-loaded by /boot/loader. This happens with drivers that need to use NdisOpenFile() to access external files (i.e. firmware images). NdisOpenFile() won't work during kernel bootstrapping because no filesystems have been mounted. To get around this, you can now do the following: o Say you have a firmware file called firmware.img o Do: ndiscvt -f firmware.img -- this creates firmware.img.ko o Put the firmware.img.ko in /boot/kernel o add firmware.img_load="YES" in /boot/loader.conf o add if_ndis_load="YES" and ndis_load="YES" as well Now the loader will suck the additional file into memory as a .ko. The phony .ko has two symbols in it: filename_start and filename_end, which are generated by objcopy(1). ndis_open_file() will traverse each module in the module list looking for these symbols and, if it finds them, it'll use them to generate the file mapping address and length values that the caller of NdisOpenFile() wants. As a bonus, this will even work if the file has been statically linked into the kernel itself, since the "kernel" module is searched too. (ndiscvt(8) will generate both filename.o and filename.ko for you). - Modify the mechanism used to provide make-pretend FASTCALL support. Rather than using inline assembly to yank the first two arguments out of %ecx and %edx, we now use the __regparm__(3) attribute (and the __stdcall__ attribute) and use some macro magic to re-order the arguments and provide dummy arguments as needed so that the arguments passed in registers end up in the right place. Change taken from DragonflyBSD version of the NDISulator.
2004-08-01 20:04:31 +00:00
editing of the kernel configuration files will be necessary in order
to have the extra object included in the build.
.El
.Sh SEE ALSO
Big mess 'o changes: - Give ndiscvt(8) the ability to process a .SYS file directly into a .o file so that we don't have to emit big messy char arrays into the ndis_driver_data.h file. This behavior is currently optional, but may become the default some day. - Give ndiscvt(8) the ability to turn arbitrary files into .ko files so that they can be pre-loaded or kldloaded. (Both this and the previous change involve using objcopy(1)). - Give NdisOpenFile() the ability to 'read' files out of kernel memory that have been kldloaded or pre-loaded, and disallow the use of the normal vn_open() file opening method during bootstrap (when no filesystems have been mounted yet). Some people have reported that kldloading if_ndis.ko works fine when the system is running multiuser but causes a panic when the modile is pre-loaded by /boot/loader. This happens with drivers that need to use NdisOpenFile() to access external files (i.e. firmware images). NdisOpenFile() won't work during kernel bootstrapping because no filesystems have been mounted. To get around this, you can now do the following: o Say you have a firmware file called firmware.img o Do: ndiscvt -f firmware.img -- this creates firmware.img.ko o Put the firmware.img.ko in /boot/kernel o add firmware.img_load="YES" in /boot/loader.conf o add if_ndis_load="YES" and ndis_load="YES" as well Now the loader will suck the additional file into memory as a .ko. The phony .ko has two symbols in it: filename_start and filename_end, which are generated by objcopy(1). ndis_open_file() will traverse each module in the module list looking for these symbols and, if it finds them, it'll use them to generate the file mapping address and length values that the caller of NdisOpenFile() wants. As a bonus, this will even work if the file has been statically linked into the kernel itself, since the "kernel" module is searched too. (ndiscvt(8) will generate both filename.o and filename.ko for you). - Modify the mechanism used to provide make-pretend FASTCALL support. Rather than using inline assembly to yank the first two arguments out of %ecx and %edx, we now use the __regparm__(3) attribute (and the __stdcall__ attribute) and use some macro magic to re-order the arguments and provide dummy arguments as needed so that the arguments passed in registers end up in the right place. Change taken from DragonflyBSD version of the NDISulator.
2004-08-01 20:04:31 +00:00
.Xr ld 1 ,
2005-01-11 11:47:22 +00:00
.Xr objcopy 1 ,
.Xr ndis 4 ,
2006-10-10 07:19:30 +00:00
.Xr kldload 8
.Sh HISTORY
The
.Nm
utility first appeared in
.Fx 5.3 .
.Sh AUTHORS
.An -nosplit
The
.Nm
utility was written by
.An Bill Paul Aq Mt wpaul@windriver.com .
The
.Xr lex 1
and
.Xr yacc 1
.Pa INF
file parser was written by
.An Matthew Dodd Aq Mt mdodd@FreeBSD.org .