freebsd-dev/tools/test/netfibs/initiator.sh

1522 lines
34 KiB
Bash
Raw Normal View History

#!/bin/sh
#-
# Copyright (c) 2012 Cisco Systems, Inc.
# All rights reserved.
#
# This software was developed by Bjoern Zeeb under contract to
# Cisco Systems, Inc..
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
#
# $FreeBSD$
#
# We will use the RFC5180 (and Errata) benchmarking working group prefix
# 2001:0002::/48 for testing.
PREFIX="2001:2:"
# Set IFACE to the real interface you want to run the test on.
: ${IFACE:=lo0}
# Number of seconds to wait for peer node to synchronize for test.
: ${WAITS:=120}
# Control port we use to exchange messages between nodes to sync. tests, etc.
: ${CTRLPORT:=6666}
# Get the number of FIBs from the kernel.
RT_NUMFIBS=`sysctl -n net.fibs`
OURADDR="2001:2:ff00::1"
PEERADDR="2001:2:ff00::2"
PEERLINKLOCAL=""
# By default all commands must succeed. Individual tests may disable this
# temporary.
set -e
# Debug magic.
case "${DEBUG}" in
42) set -x ;;
esac
#
# Helper functions.
#
check_rc()
{
local _rc _exp _testno _testname _msg _r
_rc=$1
_exp=$2
_testno=$3
_testname="$4"
_msg="$5"
_r="not ok"
if test ${_rc} -eq ${_exp}; then
_r="ok"
fi
echo "${_r} ${_testno} ${_testname} # ${_msg} ${_rc} ${_exp}"
}
print_debug()
{
local _msg
_msg="$*"
case ${DEBUG} in
''|0) ;;
*) echo "DEBUG: ${_msg}" >&2 ;;
esac
}
die()
{
local _msg
_msg="$*"
echo "ERROR: ${_msg}" >&2
exit 1
}
#
# Test functions.
#
# Make sure the local link-local and global addresses are reachable
# from all FIBs.
check_local_addr()
{
local _l i testno
print_debug "Setting up interface ${IFACE}"
ifconfig ${IFACE} inet6 ${OURADDR}/64 alias up
_l=`ifconfig ${IFACE} | awk '/inet6 fe80:/ { print $2 }'`
# Let things settle.
print_debug "Waiting 4 seconds for things to settle"
sleep 4
printf "1..%d\n" `expr 2 \* ${RT_NUMFIBS}`
testno=1
i=0
set +e
while test ${i} -lt ${RT_NUMFIBS}; do
print_debug "Testing FIB ${i}"
setfib -F${i} ping6 -n -c1 ${_l} > /dev/null 2>&1
check_rc $? 0 ${testno} "check_local_addr_${i}_l" \
"FIB ${i} ${_l}"
testno=$((testno + 1))
setfib -F${i} ping6 -n -c1 ${OURADDR} > /dev/null 2>&1
check_rc $? 0 ${testno} "check_local_addr_${i}_a" \
"FIB ${i} ${OURADDR}"
testno=$((testno + 1))
i=$((i + 1))
done
set -e
ifconfig ${IFACE} inet6 ${OURADDR}/64 -alias
}
# Cloned tun(4) devices behave differently on FIB 0 vs. FIB 1..n after creation
# (they also do in IPv4).
check_local_tun()
{
local _l i testno IFACE _msg
IFACE=tun42
print_debug "Setting up interface ${IFACE}"
ifconfig ${IFACE} create
ifconfig ${IFACE} inet6 ${OURADDR}/64 alias up
_l=`ifconfig ${IFACE} | awk '/inet6 fe80:/ { print $2 }'`
# Let things settle.
print_debug "Waiting 4 seconds for things to settle"
sleep 4
printf "1..%d\n" `expr 2 \* ${RT_NUMFIBS}`
testno=1
_msg=""
i=0
set +e
while test ${i} -lt ${RT_NUMFIBS}; do
print_debug "Testing FIB ${i}"
if test ${i} -gt 0; then
# Flag the well known behaviour as such.
_msg="TODO "
fi
setfib -F${i} ping6 -n -c1 ${_l} > /dev/null 2>&1
check_rc $? 0 ${testno} "check_local_addr_${i}_l" \
"${_msg}FIB ${i} ${_l}"
testno=$((testno + 1))
setfib -F${i} ping6 -n -c1 ${OURADDR} > /dev/null 2>&1
check_rc $? 0 ${testno} "check_local_addr_${i}_a" \
"${_msg}FIB ${i} ${OURADDR}"
testno=$((testno + 1))
i=$((i + 1))
done
set -e
ifconfig ${IFACE} inet6 ${OURADDR}/64 -alias
ifconfig ${IFACE} destroy
}
check_remote_up()
{
local _l i testno
print_debug "Setting up interface ${IFACE}"
ifconfig ${IFACE} inet6 ${OURADDR}/64 alias up
_l=`ifconfig ${IFACE} | awk '/inet6 fe80:/ { print $2 }'`
# Let things settle.
print_debug "Waiting 4 seconds for things to settle"
sleep 4
}
send_greeting()
{
local _l _greeting _keyword _fib _fibs _linklocal
print_debug "Setting up interface ${IFACE}"
ifconfig ${IFACE} inet6 ${OURADDR}/64 alias up
_l=`ifconfig ${IFACE} | awk '/inet6 fe80:/ { print $2 }'`
# Let things settle.
print_debug "Waiting 4 seconds for things to settle"
sleep 4
# Cleanup firewall and install rules to always allow NS/NA to succeed.
# The latter is needed to allow indvidiual less specific later rules
# from test cases to just disallow any IPv6 traffic on a matching FIB.
ipfw -f flush > /dev/null 2>&1
ipfw add 65000 permit ip from any to any > /dev/null 2>&1
ipfw add 5 permit ipv6-icmp from any to any icmp6types 135,136 fib 0 \
via ${IFACE} out > /dev/null 2>&1
set +e
i=0
rc=-1
while test ${i} -lt ${WAITS} -a ${rc} -ne 0; do
print_debug "Sending greeting #${i} to peer"
_greeting=`echo "SETUP ${RT_NUMFIBS} ${_l}" | \
nc -6 -w 1 ${PEERADDR} ${CTRLPORT}`
rc=$?
i=$((i + 1))
# Might sleep longer in total but better than to DoS
# and not get anywhere.
sleep 1
done
set -e
read _keyword _fibs _linklocal <<EOI
${_greeting}
EOI
print_debug "_keyword=${_keyword}"
print_debug "_fibs=${_fibs}"
print_debug "_linklocal=${_linklocal}"
case ${_keyword} in
SETUP) ;;
*) die "Got invalid keyword in greeting: ${_greeting}"
;;
esac
if test ${_fibs} -ne ${RT_NUMFIBS}; then
die "Number of FIBs not matching ours (${RT_NUMFIBS}) in" \
"greeting: ${_greeting}"
fi
PEERLINKLOCAL=${_linklocal}
# Swap the zoneid to the local interface scope.
PEERLINKLOCAL=${PEERLINKLOCAL%%\%*}"%${IFACE}"
print_debug "Successfully exchanged greeting. Peer at ${PEERLINKLOCAL}"
}
cleanup()
{
# Cleanup ipfw.
ipfw delete 5 > /dev/null 2>&1
print_debug "Removing address from interface ${IFACE}"
ifconfig ${IFACE} inet6 ${OURADDR}/64 -alias
}
testtx_icmp6()
{
local _n _transfer i testno _txt _fibtxt _rc _ec _p
_n="$1"
_transfer=$2
printf "1..%d\n" `expr 2 \* ${RT_NUMFIBS}`
testno=1
set +e
i=0
while test ${i} -lt ${RT_NUMFIBS}; do
_txt="${_n}${i}"
print_debug "Testing ${_txt}"
_fibtxt=`echo "${_txt}" | hd -v | cut -b11-60 | tr -d ' \r\n'`
eval _rc="\${rc_${i}_l}"
setfib -F${i} ping6 -n -c1 -p ${_fibtxt} \
${PEERLINKLOCAL} > /dev/null 2>&1
_ec=$?
# We need to normalize the exit code of ping6.
case ${_ec} in
0) ;;
*) _ec=1 ;;
esac
check_rc ${_ec} ${_rc} ${testno} "${_txt}_l" \
"FIB ${i} ${PEERLINKLOCAL}"
testno=$((testno + 1))
# If doing multiple transfer networks, replace PEERADDR.
_p="${PEERADDR}"
case ${_transfer} in
1) PEERADDR=2001:2:${i}::2 ;;
esac
eval _rc="\${rc_${i}_a}"
setfib -F${i} ping6 -n -c1 -p ${_fibtxt} ${PEERADDR} \
> /dev/null 2>&1
_ec=$?
# We need to normalize the exit code of ping6.
case ${_ec} in
0) ;;
*) _ec=1 ;;
esac
check_rc ${_ec} ${_rc} ${testno} "${_txt}_a" \
"FIB ${i} ${PEERADDR}"
testno=$((testno + 1))
# Restore PEERADDR.
PEERADDR="${_p}"
i=$((i + 1))
done
set -e
}
nc_send_recv()
{
local _fib _loops _msg _expreply _addr _port _opts i
_fib=$1
_loops=$2
_msg="$3"
_expreply="$4"
_addr=$5
_port=$6
_opts="$7"
i=0
while test ${i} -lt ${_loops}; do
i=$((i + 1))
case "${USE_SOSETFIB}" in
1)
_reply=`echo "${_msg}" | \
nc -V ${_fib} ${_opts} ${_addr} ${_port}`
;;
*)
_reply=`echo "${_msg}" | \
setfib -F${_fib} nc ${_opts} ${_addr} ${_port}`
;;
esac
if test "${_reply}" != "${_expreply}"; then
if test ${i} -lt ${_loops}; then
sleep 1
else
# Must let caller decide how to handle the error.
# die "Got invalid reply from peer." \
# "Expected '${_expreply}', got '${_reply}'"
return 1
fi
else
break
fi
done
return 0
}
testtx_tcp_udp()
{
local _n _o _f testno i _fibtxt
_n="$1"
_o="$2"
_f="$3"
printf "1..%d\n" `expr 2 \* ${RT_NUMFIBS}`
testno=1
i=0
while test ${i} -lt ${RT_NUMFIBS}; do
print_debug "Testing ${_f} ${i}"
eval _rc="\${rc_${i}_l}"
_fibtxt="${_n}_${i}_l ${_f} ${i} ${PEERLINKLOCAL}"
nc_send_recv ${i} 1 "${_fibtxt}" "${_fibtxt}" ${PEERLINKLOCAL} \
${CTRLPORT} "-6 ${_o} -w1"
check_rc $? ${_rc} ${testno} "${_fibtxt}"
testno=$((testno + 1))
eval _rc="\${rc_${i}_a}"
_fibtxt="${_n}_${i}_a ${_f} ${i} ${PEERADDR}"
nc_send_recv ${i} 1 "${_fibtxt}" "${_fibtxt}" ${PEERADDR} \
${CTRLPORT} "-6 ${_o} -w1"
check_rc $? ${_rc} ${testno} "${_fibtxt}"
testno=$((testno + 1))
i=$((i + 1))
done
}
# setfib TCP|UDP/IPv6 test on link-local and global address of peer from all FIBs.
testtx_ulp6_connected()
{
local _fibtxt _reply _n _o _rc _fib _f _opts
_n=$1
_o="$2"
_fib=$3
case "${USE_SOSETFIB}" in
1) _f="SO_SETFIB" ;;
*) _f="SETFIB" ;;
esac
if test "${_o}" = "-i" -a "${_f}" = "SO_SETFIB"; then
print_debug "Skipping icmp6 tests for SO_SETFIB."
return 0
fi
# Clear the neighbor table to get deterministic runs.
ndp -cn > /dev/null 2>&1
case "${_o}" in
-i) _opts="" ;; # Use TCP for START/DONE.
*) _opts="${_o}" ;;
esac
set +e
# Let peer know that we are about to start.
_msg="START ${_n}"
nc_send_recv ${_fib} ${WAITS} "${_msg}" "${_msg}" ${PEERADDR} \
${CTRLPORT} "-6 ${_opts} -w1"
case $? in
0) ;;
*) die "Got invalid reply from peer." \
"Expected '${_msg}', got '${_reply}'" ;;
esac
case "${_o}" in
-i) testtx_icmp6 "${_n}" ;;
*) testtx_tcp_udp "${_n}" "${_o}" "${_f}" ;;
esac
# Let peer know that we are done with this test to move to next.
# This must immediately succeed.
_msg="DONE ${_n}"
nc_send_recv ${_fib} ${WAITS} "${_msg}" "${_msg}" ${PEERADDR} \
${CTRLPORT} "-6 ${_opts} -w1"
case $? in
0) ;;
*) die "Got invalid reply from peer." \
"Expected '${_msg}', got '${_reply}'" ;;
esac
set -e
print_debug "Successfully received status update '${_reply}'."
}
################################################################################
#
# ping6|TCP/UDP connect link-local and global address of peer from all FIBs.
# Default reachability test.
#
testtx_icmp6_connected()
{
local i
# Setup expected return values.
i=0
while test ${i} -lt ${RT_NUMFIBS}; do
eval rc_${i}_l=0
eval rc_${i}_a=0
i=$((i + 1))
done
testtx_ulp6_connected "testtx_icmp6_connected" "-i" 0
}
testtx_tcp6_connected()
{
local i
# Setup expected return values.
i=0
while test ${i} -lt ${RT_NUMFIBS}; do
eval rc_${i}_l=0
eval rc_${i}_a=0
i=$((i + 1))
done
testtx_ulp6_connected testtx_tcp6_connected "" 0
}
testtx_udp6_connected()
{
local i
# Setup expected return values.
i=0
while test ${i} -lt ${RT_NUMFIBS}; do
eval rc_${i}_l=0
eval rc_${i}_a=0
i=$((i + 1))
done
testtx_ulp6_connected testtx_udp6_connected "-u" 0
}
################################################################################
#
# Use ipfw to return unreach messages for all but one FIB. Rotate over all.
# Making sure error messages are properly returned.
#
testtx_ulp6_connected_blackhole()
{
local fib i _n _o
_n="$1"
_o="$2"
fib=0
while test ${fib} -lt ${RT_NUMFIBS}; do
print_debug "${_n} ${fib}"
# Setup expected return values.
i=0
while test ${i} -lt ${RT_NUMFIBS}; do
ipfw delete $((100 + i)) > /dev/null 2>&1 || true
case ${i} in
${fib})
eval rc_${i}_l=0
eval rc_${i}_a=0
;;
*) eval rc_${i}_l=1
eval rc_${i}_a=1
ipfw add $((100 + i)) unreach6 admin-prohib \
ip6 from any to any fib ${i} via ${IFACE} \
out > /dev/null 2>&1
;;
esac
i=$((i + 1))
done
testtx_ulp6_connected "${_n}${fib}" "${_o}" ${fib}
case ${DEBUG} in
''|0) ;;
*) ipfw show ;;
esac
fib=$((fib + 1))
done
fib=0
while test ${fib} -lt ${RT_NUMFIBS}; do
ipfw delete $((100 + fib)) > /dev/null 2>&1 || true
fib=$((fib + 1))
done
}
testtx_icmp6_connected_blackhole()
{
testtx_ulp6_connected_blackhole \
"testtx_icmp6_connected_blackhole" "-i"
}
testtx_tcp6_connected_blackhole()
{
testtx_ulp6_connected_blackhole \
"testtx_tcp6_connected_blackhole" ""
}
testtx_udp6_connected_blackhole()
{
testtx_ulp6_connected_blackhole \
"testtx_udp6_connected_blackhole" "-u"
}
################################################################################
#
# Setup a different transfer net on each FIB. Delete all but one connected
# route in all FIBs (e.g. FIB 0 uses prefix 0, FIB 1 uses prefix 1 , ...).
#
# Need to tag NS/NA incoming to the right FIB given the default FIB does not
# know about the prefix and thus cannot do proper source address lookups for
# replying otherwise. Use ipfw.
#
testtx_ulp6_connected_transfernets()
{
local fib i _n _o _p
_n="$1"
_o="$2"
# Setup transfer networks and firewall.
ipfw delete 10 > /dev/null 2>&1 || true
fib=0
while test ${fib} -lt ${RT_NUMFIBS}; do
ifconfig ${IFACE} inet6 2001:2:${fib}::1/64 -alias \
> /dev/null 2>&1 || true
ifconfig ${IFACE} inet6 2001:2:${fib}::1/64 alias
ipfw add 10 setfib ${fib} ipv6-icmp from 2001:2:${fib}::/64 \
to any ip6 icmp6types 135,136 via ${IFACE} in \
> /dev/null 2>&1
# Remove connected routes from all but matching FIB.
i=0
while test ${i} -lt ${RT_NUMFIBS}; do
case ${i} in
${fib});;
*) setfib -F${i} route delete -inet6 \
-net 2001:2:${fib}:: > /dev/null 2>&1
;;
esac
i=$((i + 1))
done
fib=$((fib + 1))
done
# Save PEERADDR
_p=${PEERADDR}
# Run tests.
fib=0
while test ${fib} -lt ${RT_NUMFIBS}; do
PEERADDR=2001:2:${fib}::2
print_debug "${_n} ${fib}"
# Setup expected return values.
i=0
while test ${i} -lt ${RT_NUMFIBS}; do
eval rc_${i}_l=0
case ${i} in
${fib})
eval rc_${i}_a=0
;;
*) eval rc_${i}_a=1
;;
esac
i=$((i + 1))
done
testtx_ulp6_connected "${_n}${fib}" "${_o}" ${fib}
fib=$((fib + 1))
done
# Restore PEERADDR
PEERADDR=${_p}
# Cleanup transfer networks and firewall.
fib=0
while test ${fib} -lt ${RT_NUMFIBS}; do
ifconfig ${IFACE} inet6 2001:2:${fib}::1/64 -alias
fib=$((fib + 1))
done
ipfw delete 10 > /dev/null 2>&1
}
testtx_icmp6_connected_transfernets()
{
testtx_ulp6_connected_transfernets \
"testtx_icmp6_connected_transfernets" "-i"
}
testtx_tcp6_connected_transfernets()
{
testtx_ulp6_connected_transfernets \
"testtx_tcp6_connected_transfernets" ""
}
testtx_udp6_connected_transfernets()
{
testtx_ulp6_connected_transfernets \
"testtx_udp6_connected_transfernets" "-u"
}
################################################################################
#
# Setup a different transfernet on each FIB. Delete all but one connected
# route in all FIBs (e.g. FIB 0 uses prefix 0, FIB 1 uses prefix 1 , ...).
#
# Need to tag NS/NA incoming to the right FIB given the default FIB does not
# know about the prefix and thus cannot do proper source address lookups for
# replying otherwise. Use ifconfig IFACE fib.
#
testtx_ulp6_connected_ifconfig_transfernets()
{
local fib i _n _o _p
_n="$1"
_o="$2"
# Setup transfer networks.
fib=0
while test ${fib} -lt ${RT_NUMFIBS}; do
ifconfig ${IFACE} inet6 2001:2:${fib}::1/64 -alias \
> /dev/null 2>&1 || true
ifconfig ${IFACE} inet6 2001:2:${fib}::1/64 alias
# Remove connected routes from all but matching FIB.
i=0
while test ${i} -lt ${RT_NUMFIBS}; do
case ${i} in
${fib});;
*) setfib -F${i} route delete -inet6 \
-net 2001:2:${fib}:: > /dev/null 2>&1
;;
esac
i=$((i + 1))
done
fib=$((fib + 1))
done
# Save PEERADDR
_p=${PEERADDR}
# Run tests.
fib=0
while test ${fib} -lt ${RT_NUMFIBS}; do
PEERADDR=2001:2:${fib}::2
print_debug "${_n} ${fib}"
# Setup expected return values.
i=0
while test ${i} -lt ${RT_NUMFIBS}; do
eval rc_${i}_l=0
case ${i} in
${fib})
eval rc_${i}_a=0
;;
*) eval rc_${i}_a=1
;;
esac
i=$((i + 1))
done
ifconfig ${IFACE} fib ${fib}
testtx_ulp6_connected "${_n}${fib}" "${_o}" ${fib}
fib=$((fib + 1))
done
# Restore PEERADDR
PEERADDR=${_p}
# Cleanup transfer networks.
fib=0
while test ${fib} -lt ${RT_NUMFIBS}; do
ifconfig ${IFACE} inet6 2001:2:${fib}::1/64 -alias
fib=$((fib + 1))
done
ifconfig ${IFACE} fib 0
}
testtx_icmp6_connected_ifconfig_transfernets()
{
testtx_ulp6_connected_ifconfig_transfernets \
"testtx_icmp6_connected_ifconfig_transfernets" "-i"
}
testtx_tcp6_connected_ifconfig_transfernets()
{
testtx_ulp6_connected_ifconfig_transfernets \
"testtx_tcp6_connected_ifconfig_transfernets" ""
}
testtx_udp6_connected_ifconfig_transfernets()
{
testtx_ulp6_connected_ifconfig_transfernets \
"testtx_udp6_connected_ifconfig_transfernets" "-u"
}
################################################################################
#
# Make destination reachable through the same default route in each FIB only.
# Run standard reachability test.
#
testtx_ulp6_gateway()
{
local fib i _n _o _p
_n="$1"
_o="$2"
# Setup default gateway and expected error codes.
fib=0
while test ${fib} -lt ${RT_NUMFIBS}; do
setfib -F${fib} route delete -inet6 -net default \
> /dev/null 2>&1 || true
setfib -F${fib} route add -inet6 -net default ${PEERADDR} \
> /dev/null 2>&1
case "${_o}" in
-i) eval rc_${fib}_l=0 ;; # ICMPv6 will succeed
*) eval rc_${fib}_l=1 ;;
esac
eval rc_${fib}_a=0
fib=$((fib + 1))
done
# Save PEERADDR
_p=${PEERADDR}
PEERADDR="2001:2:ff01::2"
# Run tests.
print_debug "${_n}"
testtx_ulp6_connected "${_n}" "${_o}" 0
# Restore PEERADDR
PEERADDR=${_p}
# Cleanup transfer networks.
fib=0
while test ${fib} -lt ${RT_NUMFIBS}; do
setfib -F${fib} route delete -inet6 -net default \
> /dev/null 2>&1
fib=$((fib + 1))
done
}
testtx_icmp6_gateway()
{
testtx_ulp6_gateway "testtx_icmp6_gateway" "-i"
}
testtx_tcp6_gateway()
{
testtx_ulp6_gateway "testtx_tcp6_gateway" ""
}
testtx_udp6_gateway()
{
testtx_ulp6_gateway "testtx_udp6_gateway" "-u"
}
################################################################################
#
# Make destination reachable through a different default route in each FIB.
# Generate a dedicated transfer network for that in each FIB. Delete all but
# one connected route in all FIBs (e.g. FIB 0 uses prefix 0, ...).
#
# Have a default route present in each FIB all time.
#
# Need to tag NS/NA incoming to the right FIB given the default FIB does not
# know about the prefix and thus cannot do proper source address lookups for
# replying otherwise. Use ipfw.
#
#
testtx_ulp6_transfernets_gateways()
{
local fib i _n _o _p
_n="$1"
_o="$2"
# Setup transfer networks, default routes, and firewall.
fib=0
ipfw delete 10 > /dev/null 2>&1 || true
while test ${fib} -lt ${RT_NUMFIBS}; do
ifconfig ${IFACE} inet6 2001:2:${fib}::1/64 -alias \
> /dev/null 2>&1 || true
ifconfig ${IFACE} inet6 2001:2:${fib}::1/64 alias \
> /dev/null 2>&1
ipfw add 10 setfib ${fib} ipv6-icmp \
from 2001:2:${fib}::/64 to any ip6 icmp6types 135,136 \
via ${IFACE} in > /dev/null 2>&1
# Remove connected routes from all but matching FIB.
i=0
while test ${i} -lt ${RT_NUMFIBS}; do
case ${i} in
${fib});;
*) setfib -F${i} route delete -inet6 \
-net 2001:2:${fib}:: > /dev/null 2>&1
;;
esac
i=$((i + 1))
done
# Add default route.
setfib -F${fib} route delete -inet6 -net default \
> /dev/null 2>&1 || true
setfib -F${fib} route add -inet6 -net default \
2001:2:${fib}::2 > /dev/null 2>&1
fib=$((fib + 1))
done
# Save PEERADDR
_p=${PEERADDR}
PEERADDR="2001:2:ff01::2"
# Setup expected return values.
i=0
while test ${i} -lt ${RT_NUMFIBS}; do
case "${_o}" in
-i) eval rc_${i}_l=0 ;; # ICMPv6 will succeed
*) eval rc_${i}_l=1 ;;
esac
eval rc_${i}_a=0
i=$((i + 1))
done
# Run tests.
print_debug "${_n}"
testtx_ulp6_connected "${_n}" "${_o}" 0
# Restore PEERADDR
PEERADDR=${_p}
# Cleanup default routes, transfer networks, and firewall.
fib=0
while test ${fib} -lt ${RT_NUMFIBS}; do
setfib -F${fib} route delete -inet6 -net default \
> /dev/null 2>&1
ifconfig ${IFACE} inet6 2001:2:${fib}::1/64 -alias \
> /dev/null 2>&1
fib=$((fib + 1))
done
ipfw delete 10 > /dev/null 2>&1
}
testtx_icmp6_transfernets_gateways()
{
testtx_ulp6_transfernets_gateways \
"testtx_icmp6_transfernets_gateways" "-i"
}
testtx_tcp6_transfernets_gateways()
{
testtx_ulp6_transfernets_gateways \
"testtx_tcp6_transfernets_gateways" ""
}
testtx_udp6_transfernets_gateways()
{
testtx_ulp6_transfernets_gateways \
"testtx_udp6_transfernets_gateways" "-u"
}
################################################################################
#
# Make destination reachable through a different default route in each FIB.
# Generate a dedicated transfer network for that in each FIB. Delete all but
# one connected route in all FIBs (e.g. FIB 0 uses prefix 0, ...).
#
# Only have a default route present in 1 FIB at a time.
#
# Need to tag NS/NA incoming to the right FIB given the default FIB does not
# know about the prefix and thus cannot do proper source address lookups for
# replying otherwise. Use ipfw.
#
testtx_ulp6_transfernets_gateway()
{
local fib i _n _o _p
_n="$1"
_o="$2"
# Setup transfer networks, default routes, and firewall.
fib=0
ipfw delete 10 > /dev/null 2>&1 || true
while test ${fib} -lt ${RT_NUMFIBS}; do
ifconfig ${IFACE} inet6 2001:2:${fib}::1/64 -alias \
> /dev/null 2>&1 || true
ifconfig ${IFACE} inet6 2001:2:${fib}::1/64 alias \
> /dev/null 2>&1
ipfw add 10 setfib ${fib} ipv6-icmp \
from 2001:2:${fib}::/64 to any ip6 icmp6types 135,136 \
via ${IFACE} in > /dev/null 2>&1
# Remove connected routes from all but matching FIB.
i=0
while test ${i} -lt ${RT_NUMFIBS}; do
case ${i} in
${fib});;
*) setfib -F${i} route delete -inet6 \
-net 2001:2:${fib}:: > /dev/null 2>&1
;;
esac
i=$((i + 1))
done
fib=$((fib + 1))
done
# Save PEERADDR
_p=${PEERADDR}
PEERADDR="2001:2:ff01::2"
# Run tests.
fib=0
while test ${fib} -lt ${RT_NUMFIBS}; do
print_debug "${_n} ${fib}"
# Setup expected return values.
i=0
while test ${i} -lt ${RT_NUMFIBS}; do
case "${_o}" in
-i) eval rc_${i}_l=0 ;; # ICMPv6 will succeed
*) eval rc_${i}_l=1 ;;
esac
case ${i} in
${fib})
eval rc_${i}_a=0
;;
*) eval rc_${i}_a=1
;;
esac
i=$((i + 1))
done
# Add default route.
setfib -F${fib} route delete -inet6 -net default \
> /dev/null 2>&1 || true
setfib -F${fib} route add -inet6 -net default \
2001:2:${fib}::2 > /dev/null 2>&1
testtx_ulp6_connected "${_n}${fib}" "${_o}" ${fib}
# Delete default route again.
setfib -F${fib} route delete -inet6 -net default \
> /dev/null 2>&1
fib=$((fib + 1))
done
# Restore PEERADDR
PEERADDR=${_p}
# Cleanup default routes, transfer networks, and firewall.
fib=0
while test ${fib} -lt ${RT_NUMFIBS}; do
setfib -F${fib} route delete -inet6 -net default \
> /dev/null 2>&1
ifconfig ${IFACE} inet6 2001:2:${fib}::1/64 -alias \
> /dev/null 2>&1
fib=$((fib + 1))
done
ipfw delete 10 > /dev/null 2>&1
}
testtx_icmp6_transfernets_gateway()
{
testtx_ulp6_transfernets_gateway \
"testtx_icmp6_transfernets_gateway" "-i"
}
testtx_tcp6_transfernets_gateway()
{
testtx_ulp6_transfernets_gateway \
"testtx_tcp6_transfernets_gateway" ""
}
testtx_udp6_transfernets_gateway()
{
testtx_ulp6_transfernets_gateway \
"testtx_udp6_transfernets_gateway" "-u"
}
################################################################################
#
# RX tests (Remotely originated connections). The FIB tests happens on peer.
#
# # For IPFW, IFCONFIG
# # For each FIB
# # Send OOB well known to work START, wait for reflect
# # Send probe, wait for reply with FIB# or RST/ICMP6 unreach
# # (in case of ICMP6 use magic like ipfw count and OOB reply)
# # Send OOB well known to work DONE, wait for reflect
# # Compare real with expected results.
#
testrx_results()
{
local _r _n _fib i count _instances _transfer _o
_fib="$1"
_n="$2"
_r="$3"
_instances=$4
_transfer=$5
_o="$6"
print_debug "testrx_results ${_fib} ${_n} ${_r} ${_instances}"
# Trim "RESULT "
_r=${_r#* }
echo "1..${RT_NUMFIBS}"
while read i count; do
if test ${_instances} -gt 1; then
if test ${count} -gt 0; then
echo "ok ${i} ${_n}result_${i} #" \
"FIB ${i} ${count} (tested)"
else
echo "not ok ${i} ${_n}result_${i} #" \
"FIB ${i} ${count} (tested)"
fi
else
case ${i} in
${_fib})
if test ${count} -gt 0; then
echo "ok ${i} ${_n}result_${i} #" \
"FIB ${i} ${count} (tested)"
else
echo "not ok ${i} ${_n}result_${i} #" \
"FIB ${i} ${count} (tested)"
fi
;;
*) if test ${count} -eq 0; then
echo "ok ${i} ${_n}result_${i} #" \
"FIB ${i} ${count}"
else
echo "not ok ${i} ${_n}result_${i} #" \
"FIB ${i} ${count}"
fi
;;
esac
fi
i=$((i + 1))
done <<EOI
`echo "${_r}" | tr ',' '\n'`
EOI
}
testrx_tcp_udp()
{
local _n _o _f testno i _fibtxt _instances _res _port _transfer _p
_n="$1"
_o="$2"
_f="$3"
_instances=$4
_transfer=$5
# Unused so far.
: ${_instances:=1}
printf "1..%d\n" `expr 2 \* ${RT_NUMFIBS}`
testno=1
i=0
while test ${i} -lt ${RT_NUMFIBS}; do
print_debug "Testing ${_f} ${i}"
# We are expecting the FIB number (only) to be returned.
eval _rc="\${rc_${i}_l}"
_fibtxt="${_n}_${i}_l ${_f} ${i} ${PEERLINKLOCAL}"
if test ${_instances} -gt 1; then
_res="FIB ${i}"
_port=$((CTRLPORT + 1000 + i))
else
_res="${_fibtxt}"
_port=${CTRLPORT}
fi
nc_send_recv ${i} 1 "${_fibtxt}" "${_res}" ${PEERLINKLOCAL} \
${_port} "-6 ${_o} -w1"
check_rc $? ${_rc} ${testno} "${_fibtxt}" "${_reply}"
testno=$((testno + 1))
# If doing multiple transfer networks, replace PEERADDR.
_p="${PEERADDR}"
case ${_transfer} in
1) PEERADDR=2001:2:${i}::2 ;;
esac
eval _rc="\${rc_${i}_a}"
_fibtxt="${_n}_${i}_a ${_f} ${i} ${PEERADDR}"
if test ${_instances} -gt 1; then
_res="FIB ${i}"
_port=$((CTRLPORT + 1000 + i))
else
_res="${_fibtxt}"
_port=${CTRLPORT}
fi
nc_send_recv ${i} 1 "${_fibtxt}" "${_res}" ${PEERADDR} \
${_port} "-6 ${_o} -w1"
check_rc $? ${_rc} ${testno} "${_fibtxt}" "${_reply}"
testno=$((testno + 1))
# Restore PEERADDR.
PEERADDR="${_p}"
i=$((i + 1))
done
}
testrx_setup_transfer_networks()
{
local i
i=0
while test ${i} -lt ${RT_NUMFIBS}; do
ifconfig ${IFACE} inet6 2001:2:${i}::1/64 -alias \
> /dev/null 2>&1 || true
ifconfig ${IFACE} inet6 2001:2:${i}::1/64 alias
i=$((i + 1))
done
}
testrx_cleanup_transfer_networks()
{
local i
i=0
while test ${i} -lt ${RT_NUMFIBS}; do
ifconfig ${IFACE} inet6 2001:2:${i}::1/64 -alias \
> /dev/null 2>&1
i=$((i + 1))
done
}
testrx_run_test()
{
local _n _t _fib _o _txt _msg i _reply _instances _destructive _transfer
_n="$1"
_t="$2"
_fib=$3
_o="$4"
_instances=$5
_detsructive=$6
_transfer=$7
# Netcat options (for UDP basically).
case "${_o}" in
-i) _opts="" ;; # Use TCP for START/DONE.
*) _opts="${_o}" ;;
esac
# Combined test case base name.
case ${USE_SOSETFIB} in
0) _f="setfib" ;;
1) _f="so_setfib" ;;
*) die "Unexpected value for SO_SETFIB: ${SO_SETFIB}" ;;
esac
_txt="${_n}_${_f}_${_t}_${_fib}_${_instances}_${_detsructive}_${_transfer}"
print_debug "Starting test '${_txt}' (for ${_instances} instances)."
case ${_transfer} in
1) testrx_setup_transfer_networks ;;
esac
# Let the other side a chance to get ready as well.
sleep 1
set +e
# Let peer know that we are about to start.
_msg="START ${_txt}"
nc_send_recv ${_fib} ${WAITS} "${_msg}" "${_msg}" ${PEERADDR} \
${CTRLPORT} "-6 ${_opts} -w1"
case $? in
0) ;;
*) die "Got invalid reply from peer." \
"Expected '${_msg}', got '${_reply}'" ;;
esac
# Let the other side a chance to get ready as well.
sleep 1
# Send probe.
case "${_o}" in
-i) testtx_icmp6 "${_txt}_" ${_transfer} ;;
*) testrx_tcp_udp "${_txt}" "${_o}" "${_fib}" ${_instances} \
${_transfer} ;;
esac
# Let peer know that we are done with this test to move to next.
# This must immediately succeed.
_msg="DONE ${_txt}"
nc_send_recv ${_fib} ${WAITS} "${_msg}" "${_msg}" ${PEERADDR} \
${CTRLPORT} "-6 ${_opts} -w1"
case $? in
0) ;;
*) die "Got invalid reply from peer." \
"Expected '${_msg}', got '${_reply}'" ;;
esac
# Collect and validate the results. Always use TCP.
sleep 1
set +e
nc_send_recv ${_fib} 1 "RESULT REQUEST" "" ${PEERADDR} \
${CTRLPORT} "-6 -w1"
case "${_reply}" in
RESULT\ *) testrx_results ${_fib} "${_txt}_" "${_reply}" ${_instances} \
${_transfer} "${_o}"
;;
*) die "Got invalid reply from peer." \
"Expected 'RESULT ...', got '${_reply}'" ;;
esac
set -e
case ${_transfer} in
1) testrx_cleanup_transfer_networks ;;
esac
print_debug "Successfully received status update '${_reply}'."
}
testrx_main_setup_rc()
{
local _n _t _fib _o _instances _destructive _transfer i
_n="$1"
_t="$2"
_fib=$3
_o="$4"
_instances=$5
_destructive=$6
_transfer=$7
# Setup expected return values.
if test ${_destructive} -eq 0; then
i=0
while test ${i} -lt ${RT_NUMFIBS}; do
eval rc_${i}_l=0
eval rc_${i}_a=0
i=$((i + 1))
done
else
i=0
while test ${i} -lt ${RT_NUMFIBS}; do
eval rc_${i}_l=0
case ${i} in
${_fib}) eval rc_${i}_a=0 ;;
*) # ICMP6 cannot be distinguished and will
# always work in single transfer network.
case "${_o}" in
-i) case ${_transfer} in
0) eval rc_${i}_a=0 ;;
1) eval rc_${i}_a=1 ;;
esac
;;
*) if test ${_instances} -eq 1 -a \
${_transfer} -eq 0; then
eval rc_${i}_a=0
else
eval rc_${i}_a=1
fi
;;
esac
;;
esac
i=$((i + 1))
done
fi
print_debug "${_n}_${t}_${_fib} ${_instances} ${_destructive}" \
"${_transfer}"
testrx_run_test "${_n}" "${t}" ${_fib} "${_o}" ${_instances} \
${_destructive} ${_transfer}
}
testrx_main()
{
local _n _o s t fib _instances _destructive _transfer
_n="$1"
_o="$2"
_instances=$3
: ${_instances:=1}
print_debug "${_n}"
for _transfer in 1 0; do
for _destructive in 0 1; do
for t in ipfw ifconfig; do
print_debug "${_n}_${t}"
fib=0
while test ${fib} -lt ${RT_NUMFIBS}; do
testrx_main_setup_rc "${_n}" "${t}" \
${fib} "${_o}" ${_instances} \
${_destructive} ${_transfer}
fib=$((fib + 1))
done
done
done
done
}
################################################################################
#
#
#
testrx_icmp6_same_addr_one_fib_a_time()
{
testrx_main \
"testrx_icmp6_same_addr_one_fib_a_time" "-i"
}
testrx_tcp6_same_addr_one_fib_a_time()
{
testrx_main \
"testrx_tcp6_same_addr_one_fib_a_time" ""
}
testrx_udp6_same_addr_one_fib_a_time()
{
testrx_main \
"testrx_udp6_same_addr_one_fib_a_time" "-u"
}
################################################################################
testrx_tcp6_same_addr_all_fibs_a_time()
{
testrx_main \
"testrx_tcp6_same_addr_all_fibs_a_time" "" ${RT_NUMFIBS}
}
testrx_udp6_same_addr_all_fibs_a_time()
{
testrx_main \
"testrx_udp6_same_addr_all_fibs_a_time" "-u" ${RT_NUMFIBS}
}
################################################################################
#
# Prereqs.
#
if test `sysctl -n security.jail.jailed` -eq 0; then
kldload ipfw > /dev/null 2>&1 || kldstat -v | grep -q ipfw
# Reduce the time we wait in case of no reply to 2s.
sysctl net.inet.tcp.keepinit=2000 > /dev/null 2>&1
fi
ipfw -f flush > /dev/null 2>&1 || die "please load ipfw in base system"
ipfw add 65000 permit ip from any to any > /dev/null 2>&1
################################################################################
#
# Run tests.
#
# 64 cases at 16 FIBs.
check_local_addr
check_local_tun
send_greeting
# Initiator testing.
for uso in 0 1; do
USE_SOSETFIB=${uso}
# Only run ICMP6 tests for the first loop.
# 160 cases at 16 FIBs.
test ${uso} -ne 0 || testtx_icmp6_connected && sleep 1
testtx_tcp6_connected && sleep 1
testtx_udp6_connected && sleep 1
# 2560 cases at 16 FIBs.
test ${uso} -ne 0 || testtx_icmp6_connected_blackhole && sleep 1
testtx_tcp6_connected_blackhole && sleep 1
testtx_udp6_connected_blackhole && sleep 1
# 2560 cases at 16 FIBs.
test ${uso} -ne 0 || testtx_icmp6_connected_transfernets && sleep 1
testtx_tcp6_connected_transfernets && sleep 1
testtx_udp6_connected_transfernets && sleep 1
# 2560 cases at 16 FIBs.
test ${uso} -ne 0 || \
testtx_icmp6_connected_ifconfig_transfernets && sleep 1
testtx_tcp6_connected_ifconfig_transfernets && sleep 1
testtx_udp6_connected_ifconfig_transfernets && sleep 1
# 160 cases at 16 FIBs.
test ${uso} -ne 0 || testtx_icmp6_gateway && sleep 1
testtx_tcp6_gateway && sleep 1
testtx_udp6_gateway && sleep 1
# 160 cases at 16 FIBs.
test ${uso} -ne 0 || testtx_icmp6_transfernets_gateways && sleep 1
testtx_tcp6_transfernets_gateways && sleep 1
testtx_udp6_transfernets_gateways && sleep 1
# 2560 cases at 16 FIBs.
test ${uso} -ne 0 || testtx_icmp6_transfernets_gateway && sleep 1
testtx_tcp6_transfernets_gateway && sleep 1
testtx_udp6_transfernets_gateway && sleep 1
done
# Receiver testing.
for uso in 0 1; do
USE_SOSETFIB=${uso}
# Only expect ICMP6 tests for the first loop.
# 6144 cases at 16 FIBs.
test ${uso} -ne 0 || testrx_icmp6_same_addr_one_fib_a_time && sleep 1
# 12288 cases at 16 FIBs.
testrx_tcp6_same_addr_one_fib_a_time && sleep 1
# 12288 cases at 16 FIBs.
testrx_udp6_same_addr_one_fib_a_time && sleep 1
# 12288 cases at 16 FIBs.
testrx_tcp6_same_addr_all_fibs_a_time && sleep 1
# 12288 cases at 16 FIBs.
testrx_udp6_same_addr_all_fibs_a_time && sleep 1
done
cleanup
# end