d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
8803a0eeb7
freebsd-dev/sys/compat/linux/linux_signal.c

439 lines
10 KiB
C
Raw Normal View History

First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
/*-
* Copyright (c) 1994-1995 S<EFBFBD>ren Schmidt
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer
* in this position and unchanged.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software withough specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
$Id$ -> $FreeBSD$
1999-08-28 01:08:13 +00:00
* $FreeBSD$
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
*/
#include <sys/param.h>
#include <sys/systm.h>
Undo part of the tangle of having sys/lock.h and sys/mutex.h included in other "system" header files. Also help the deprecation of lockmgr.h by making it a sub-include of sys/lock.h and removing sys/lockmgr.h form kernel .c files. Sort sys/*.h includes where possible in affected files. OK'ed by: bde (with reservations)
2001-05-01 08:13:21 +00:00
#include <sys/lock.h>
#include <sys/mutex.h>
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
#include <sys/proc.h>
#include <sys/signalvar.h>
Undo part of the tangle of having sys/lock.h and sys/mutex.h included in other "system" header files. Also help the deprecation of lockmgr.h by making it a sub-include of sys/lock.h and removing sys/lockmgr.h form kernel .c files. Sort sys/*.h includes where possible in affected files. OK'ed by: bde (with reservations)
2001-05-01 08:13:21 +00:00
#include <sys/sysproto.h>
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
Update include directives. Make linux_to_bsd_sigset and linux_do_sigaction non-static. Move linux_sigaction. linux_sigsuspend, linux_rt_sigsuspend, linux_pause and linux_sigaltstack to MD code.
2000-08-22 01:49:54 +00:00
#include <machine/../linux/linux.h>
Revert auto-generation. The Alpha port is broken. Syncing with it is wrong.
2000-11-10 21:30:19 +00:00
#include <machine/../linux/linux_proto.h>
Update include directives. Make linux_to_bsd_sigset and linux_do_sigaction non-static. Move linux_sigaction. linux_sigsuspend, linux_rt_sigsuspend, linux_pause and linux_sigaltstack to MD code.
2000-08-22 01:49:54 +00:00
#include <compat/linux/linux_signal.h>
#include <compat/linux/linux_util.h>
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
Update include directives. Make linux_to_bsd_sigset and linux_do_sigaction non-static. Move linux_sigaction. linux_sigsuspend, linux_rt_sigsuspend, linux_pause and linux_sigaltstack to MD code.
2000-08-22 01:49:54 +00:00
void
Round of cleanups and enhancements. These include (in random order): o Introduce private types for use in linux syscalls for two reasons: 1. establish type independence for ease in porting and, 2. provide a visual queue as to which syscalls have proper prototypes to further cleanup the i386/alpha split. Linuxulator types are prefixed by 'l_'. void and char have not been "virtualized". o Provide dummy functions for all syscalls and remove dummy functions or implementations of truely obsolete syscalls. o Sanitize the shm*, sem* and msg* syscalls. o Make a first attempt to implement the linux_sysctl syscall. At this time it only returns one MIB (KERN_VERSION), but most importantly, it tells us when we need to add additional sysctls :-) o Bump the kenel version up to 2.4.2 (this is not the same as the KERN_VERSION MIB, BTW). o Implement new syscalls, of which most are specific to i386. Our syscall table is now up to date with Linux 2.4.2. Some highlights: - Implement the 32-bit uid_t and gid_t bases syscalls. - Implement a couple of 64-bit file size/offset bases syscalls. o Fix or improve numerous syscalls and prototypes. o Reduce style(9) violations while I'm here. Especially indentation inconsistencies within the same file are addressed. Re-indenting did not obfuscate actual changes to the extend that it could not be combined. NOTE: I spend some time testing these changes and found that if there were regressions, they were not caused by these changes AFAICT. It was observed that installing a RH 7.1 runtime environment did make matters worse. Hangs and/or reboots have been observed with and without these changes, so when it failed to make life better in cases it doesn't look like it made it worse.
2001-09-08 19:07:04 +00:00
linux_to_bsd_sigset(l_sigset_t *lss, sigset_t *bss)
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
{
int b, l;
SIGEMPTYSET(*bss);
bss->__bits[0] = lss->__bits[0] & ~((1U << LINUX_SIGTBLSZ) - 1);
bss->__bits[1] = lss->__bits[1];
for (l = 1; l <= LINUX_SIGTBLSZ; l++) {
if (LINUX_SIGISMEMBER(*lss, l)) {
The MI/MD split wasn't perfect and the MI files need hacks for the AlphaLinux compat bits. This will be better cleaned up soon. Agreed to what ever was necessary by: marcel
2000-11-01 19:48:35 +00:00
#ifdef __alpha__
b = _SIG_IDX(l);
#else
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
b = linux_to_bsd_signal[_SIG_IDX(l)];
The MI/MD split wasn't perfect and the MI files need hacks for the AlphaLinux compat bits. This will be better cleaned up soon. Agreed to what ever was necessary by: marcel
2000-11-01 19:48:35 +00:00
#endif
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
if (b)
SIGADDSET(*bss, b);
}
Mega-commit for Linux emulator update.. This has been stress tested under netscape-2.0 for Linux running all the Java stuff. The scrollbars are now working, at least on my machine. (whew! :-) I'm uncomfortable with the size of this commit, but it's too inter-dependant to easily seperate out. The main changes: COMPAT_LINUX is *GONE*. Most of the code has been moved out of the i386 machine dependent section into the linux emulator itself. The int 0x80 syscall code was almost identical to the lcall 7,0 code and a minor tweak allows them to both be used with the same C code. All kernels can now just modload the lkm and it'll DTRT without having to rebuild the kernel first. Like IBCS2, you can statically compile it in with "options LINUX". A pile of new syscalls implemented, including getdents(), llseek(), readv(), writev(), msync(), personality(). The Linux-ELF libraries want to use some of these. linux_select() now obeys Linux semantics, ie: returns the time remaining of the timeout value rather than leaving it the original value. Quite a few bugs removed, including incorrect arguments being used in syscalls.. eg: mixups between passing the sigset as an int, vs passing it as a pointer and doing a copyin(), missing return values, unhandled cases, SIOC* ioctls, etc. The build for the code has changed. i386/conf/files now knows how to build linux_genassym and generate linux_assym.h on the fly. Supporting changes elsewhere in the kernel: The user-mode signal trampoline has moved from the U area to immediately below the top of the stack (below PS_STRINGS). This allows the different binary emulations to have their own signal trampoline code (which gets rid of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so that the emulator can provide the exact "struct sigcontext *" argument to the program's signal handlers. The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which have the same values as the re-used SA_DISABLE and SA_ONSTACK which are intended for sigaction only. This enables the support of a SA_RESETHAND flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal semantics where the signal handler is reset when it's triggered. makesyscalls.sh no longer appends the struct sysentvec on the end of the generated init_sysent.c code. It's a lot saner to have it in a seperate file rather than trying to update the structure inside the awk script. :-) At exec time, the dozen bytes or so of signal trampoline code are copied to the top of the user's stack, rather than obtaining the trampoline code the old way by getting a clone of the parent's user area. This allows Linux and native binaries to freely exec each other without getting trampolines mixed up.
1996-03-02 19:38:20 +00:00
}
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
}
A start at an implemention of linux_rt_sendsig & linux_rt_sigreturn and associated user-level signal trampoline glue. Without this patch, an SA_SIGINFO style handler can be installed by a linux app, but if the handler accesses its sip argument, it will get a garbage pointer and likely segfault. We currently supply a valid pointer, but its contents are mainly garbage. Filling this in properly is future work. This is the second of 3 commits that will get IBM's JDK 1.3 working with FreeBSD ...
2000-10-17 00:00:20 +00:00
void
Round of cleanups and enhancements. These include (in random order): o Introduce private types for use in linux syscalls for two reasons: 1. establish type independence for ease in porting and, 2. provide a visual queue as to which syscalls have proper prototypes to further cleanup the i386/alpha split. Linuxulator types are prefixed by 'l_'. void and char have not been "virtualized". o Provide dummy functions for all syscalls and remove dummy functions or implementations of truely obsolete syscalls. o Sanitize the shm*, sem* and msg* syscalls. o Make a first attempt to implement the linux_sysctl syscall. At this time it only returns one MIB (KERN_VERSION), but most importantly, it tells us when we need to add additional sysctls :-) o Bump the kenel version up to 2.4.2 (this is not the same as the KERN_VERSION MIB, BTW). o Implement new syscalls, of which most are specific to i386. Our syscall table is now up to date with Linux 2.4.2. Some highlights: - Implement the 32-bit uid_t and gid_t bases syscalls. - Implement a couple of 64-bit file size/offset bases syscalls. o Fix or improve numerous syscalls and prototypes. o Reduce style(9) violations while I'm here. Especially indentation inconsistencies within the same file are addressed. Re-indenting did not obfuscate actual changes to the extend that it could not be combined. NOTE: I spend some time testing these changes and found that if there were regressions, they were not caused by these changes AFAICT. It was observed that installing a RH 7.1 runtime environment did make matters worse. Hangs and/or reboots have been observed with and without these changes, so when it failed to make life better in cases it doesn't look like it made it worse.
2001-09-08 19:07:04 +00:00
bsd_to_linux_sigset(sigset_t *bss, l_sigset_t *lss)
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
{
int b, l;
LINUX_SIGEMPTYSET(*lss);
lss->__bits[0] = bss->__bits[0] & ~((1U << LINUX_SIGTBLSZ) - 1);
lss->__bits[1] = bss->__bits[1];
for (b = 1; b <= LINUX_SIGTBLSZ; b++) {
if (SIGISMEMBER(*bss, b)) {
The MI/MD split wasn't perfect and the MI files need hacks for the AlphaLinux compat bits. This will be better cleaned up soon. Agreed to what ever was necessary by: marcel
2000-11-01 19:48:35 +00:00
#if __alpha__
l = _SIG_IDX(b);
#else
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
l = bsd_to_linux_signal[_SIG_IDX(b)];
The MI/MD split wasn't perfect and the MI files need hacks for the AlphaLinux compat bits. This will be better cleaned up soon. Agreed to what ever was necessary by: marcel
2000-11-01 19:48:35 +00:00
#endif
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
if (l)
LINUX_SIGADDSET(*lss, l);
}
Mega-commit for Linux emulator update.. This has been stress tested under netscape-2.0 for Linux running all the Java stuff. The scrollbars are now working, at least on my machine. (whew! :-) I'm uncomfortable with the size of this commit, but it's too inter-dependant to easily seperate out. The main changes: COMPAT_LINUX is *GONE*. Most of the code has been moved out of the i386 machine dependent section into the linux emulator itself. The int 0x80 syscall code was almost identical to the lcall 7,0 code and a minor tweak allows them to both be used with the same C code. All kernels can now just modload the lkm and it'll DTRT without having to rebuild the kernel first. Like IBCS2, you can statically compile it in with "options LINUX". A pile of new syscalls implemented, including getdents(), llseek(), readv(), writev(), msync(), personality(). The Linux-ELF libraries want to use some of these. linux_select() now obeys Linux semantics, ie: returns the time remaining of the timeout value rather than leaving it the original value. Quite a few bugs removed, including incorrect arguments being used in syscalls.. eg: mixups between passing the sigset as an int, vs passing it as a pointer and doing a copyin(), missing return values, unhandled cases, SIOC* ioctls, etc. The build for the code has changed. i386/conf/files now knows how to build linux_genassym and generate linux_assym.h on the fly. Supporting changes elsewhere in the kernel: The user-mode signal trampoline has moved from the U area to immediately below the top of the stack (below PS_STRINGS). This allows the different binary emulations to have their own signal trampoline code (which gets rid of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so that the emulator can provide the exact "struct sigcontext *" argument to the program's signal handlers. The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which have the same values as the re-used SA_DISABLE and SA_ONSTACK which are intended for sigaction only. This enables the support of a SA_RESETHAND flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal semantics where the signal handler is reset when it's triggered. makesyscalls.sh no longer appends the struct sysentvec on the end of the generated init_sysent.c code. It's a lot saner to have it in a seperate file rather than trying to update the structure inside the awk script. :-) At exec time, the dozen bytes or so of signal trampoline code are copied to the top of the user's stack, rather than obtaining the trampoline code the old way by getting a clone of the parent's user area. This allows Linux and native binaries to freely exec each other without getting trampolines mixed up.
1996-03-02 19:38:20 +00:00
}
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
}
Minor touch-up... make two functions static, and add missing $Id$
1996-03-02 21:00:11 +00:00
static void
Round of cleanups and enhancements. These include (in random order): o Introduce private types for use in linux syscalls for two reasons: 1. establish type independence for ease in porting and, 2. provide a visual queue as to which syscalls have proper prototypes to further cleanup the i386/alpha split. Linuxulator types are prefixed by 'l_'. void and char have not been "virtualized". o Provide dummy functions for all syscalls and remove dummy functions or implementations of truely obsolete syscalls. o Sanitize the shm*, sem* and msg* syscalls. o Make a first attempt to implement the linux_sysctl syscall. At this time it only returns one MIB (KERN_VERSION), but most importantly, it tells us when we need to add additional sysctls :-) o Bump the kenel version up to 2.4.2 (this is not the same as the KERN_VERSION MIB, BTW). o Implement new syscalls, of which most are specific to i386. Our syscall table is now up to date with Linux 2.4.2. Some highlights: - Implement the 32-bit uid_t and gid_t bases syscalls. - Implement a couple of 64-bit file size/offset bases syscalls. o Fix or improve numerous syscalls and prototypes. o Reduce style(9) violations while I'm here. Especially indentation inconsistencies within the same file are addressed. Re-indenting did not obfuscate actual changes to the extend that it could not be combined. NOTE: I spend some time testing these changes and found that if there were regressions, they were not caused by these changes AFAICT. It was observed that installing a RH 7.1 runtime environment did make matters worse. Hangs and/or reboots have been observed with and without these changes, so when it failed to make life better in cases it doesn't look like it made it worse.
2001-09-08 19:07:04 +00:00
linux_to_bsd_sigaction(l_sigaction_t *lsa, struct sigaction *bsa)
Mega-commit for Linux emulator update.. This has been stress tested under netscape-2.0 for Linux running all the Java stuff. The scrollbars are now working, at least on my machine. (whew! :-) I'm uncomfortable with the size of this commit, but it's too inter-dependant to easily seperate out. The main changes: COMPAT_LINUX is *GONE*. Most of the code has been moved out of the i386 machine dependent section into the linux emulator itself. The int 0x80 syscall code was almost identical to the lcall 7,0 code and a minor tweak allows them to both be used with the same C code. All kernels can now just modload the lkm and it'll DTRT without having to rebuild the kernel first. Like IBCS2, you can statically compile it in with "options LINUX". A pile of new syscalls implemented, including getdents(), llseek(), readv(), writev(), msync(), personality(). The Linux-ELF libraries want to use some of these. linux_select() now obeys Linux semantics, ie: returns the time remaining of the timeout value rather than leaving it the original value. Quite a few bugs removed, including incorrect arguments being used in syscalls.. eg: mixups between passing the sigset as an int, vs passing it as a pointer and doing a copyin(), missing return values, unhandled cases, SIOC* ioctls, etc. The build for the code has changed. i386/conf/files now knows how to build linux_genassym and generate linux_assym.h on the fly. Supporting changes elsewhere in the kernel: The user-mode signal trampoline has moved from the U area to immediately below the top of the stack (below PS_STRINGS). This allows the different binary emulations to have their own signal trampoline code (which gets rid of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so that the emulator can provide the exact "struct sigcontext *" argument to the program's signal handlers. The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which have the same values as the re-used SA_DISABLE and SA_ONSTACK which are intended for sigaction only. This enables the support of a SA_RESETHAND flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal semantics where the signal handler is reset when it's triggered. makesyscalls.sh no longer appends the struct sysentvec on the end of the generated init_sysent.c code. It's a lot saner to have it in a seperate file rather than trying to update the structure inside the awk script. :-) At exec time, the dozen bytes or so of signal trampoline code are copied to the top of the user's stack, rather than obtaining the trampoline code the old way by getting a clone of the parent's user area. This allows Linux and native binaries to freely exec each other without getting trampolines mixed up.
1996-03-02 19:38:20 +00:00
{
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
linux_to_bsd_sigset(&lsa->lsa_mask, &bsa->sa_mask);
bsa->sa_handler = lsa->lsa_handler;
bsa->sa_flags = 0;
if (lsa->lsa_flags & LINUX_SA_NOCLDSTOP)
bsa->sa_flags |= SA_NOCLDSTOP;
if (lsa->lsa_flags & LINUX_SA_NOCLDWAIT)
bsa->sa_flags |= SA_NOCLDWAIT;
if (lsa->lsa_flags & LINUX_SA_SIGINFO)
bsa->sa_flags |= SA_SIGINFO;
if (lsa->lsa_flags & LINUX_SA_ONSTACK)
bsa->sa_flags |= SA_ONSTACK;
if (lsa->lsa_flags & LINUX_SA_RESTART)
bsa->sa_flags |= SA_RESTART;
if (lsa->lsa_flags & LINUX_SA_ONESHOT)
bsa->sa_flags |= SA_RESETHAND;
if (lsa->lsa_flags & LINUX_SA_NOMASK)
bsa->sa_flags |= SA_NODEFER;
Mega-commit for Linux emulator update.. This has been stress tested under netscape-2.0 for Linux running all the Java stuff. The scrollbars are now working, at least on my machine. (whew! :-) I'm uncomfortable with the size of this commit, but it's too inter-dependant to easily seperate out. The main changes: COMPAT_LINUX is *GONE*. Most of the code has been moved out of the i386 machine dependent section into the linux emulator itself. The int 0x80 syscall code was almost identical to the lcall 7,0 code and a minor tweak allows them to both be used with the same C code. All kernels can now just modload the lkm and it'll DTRT without having to rebuild the kernel first. Like IBCS2, you can statically compile it in with "options LINUX". A pile of new syscalls implemented, including getdents(), llseek(), readv(), writev(), msync(), personality(). The Linux-ELF libraries want to use some of these. linux_select() now obeys Linux semantics, ie: returns the time remaining of the timeout value rather than leaving it the original value. Quite a few bugs removed, including incorrect arguments being used in syscalls.. eg: mixups between passing the sigset as an int, vs passing it as a pointer and doing a copyin(), missing return values, unhandled cases, SIOC* ioctls, etc. The build for the code has changed. i386/conf/files now knows how to build linux_genassym and generate linux_assym.h on the fly. Supporting changes elsewhere in the kernel: The user-mode signal trampoline has moved from the U area to immediately below the top of the stack (below PS_STRINGS). This allows the different binary emulations to have their own signal trampoline code (which gets rid of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so that the emulator can provide the exact "struct sigcontext *" argument to the program's signal handlers. The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which have the same values as the re-used SA_DISABLE and SA_ONSTACK which are intended for sigaction only. This enables the support of a SA_RESETHAND flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal semantics where the signal handler is reset when it's triggered. makesyscalls.sh no longer appends the struct sysentvec on the end of the generated init_sysent.c code. It's a lot saner to have it in a seperate file rather than trying to update the structure inside the awk script. :-) At exec time, the dozen bytes or so of signal trampoline code are copied to the top of the user's stack, rather than obtaining the trampoline code the old way by getting a clone of the parent's user area. This allows Linux and native binaries to freely exec each other without getting trampolines mixed up.
1996-03-02 19:38:20 +00:00
}
Minor touch-up... make two functions static, and add missing $Id$
1996-03-02 21:00:11 +00:00
static void
Round of cleanups and enhancements. These include (in random order): o Introduce private types for use in linux syscalls for two reasons: 1. establish type independence for ease in porting and, 2. provide a visual queue as to which syscalls have proper prototypes to further cleanup the i386/alpha split. Linuxulator types are prefixed by 'l_'. void and char have not been "virtualized". o Provide dummy functions for all syscalls and remove dummy functions or implementations of truely obsolete syscalls. o Sanitize the shm*, sem* and msg* syscalls. o Make a first attempt to implement the linux_sysctl syscall. At this time it only returns one MIB (KERN_VERSION), but most importantly, it tells us when we need to add additional sysctls :-) o Bump the kenel version up to 2.4.2 (this is not the same as the KERN_VERSION MIB, BTW). o Implement new syscalls, of which most are specific to i386. Our syscall table is now up to date with Linux 2.4.2. Some highlights: - Implement the 32-bit uid_t and gid_t bases syscalls. - Implement a couple of 64-bit file size/offset bases syscalls. o Fix or improve numerous syscalls and prototypes. o Reduce style(9) violations while I'm here. Especially indentation inconsistencies within the same file are addressed. Re-indenting did not obfuscate actual changes to the extend that it could not be combined. NOTE: I spend some time testing these changes and found that if there were regressions, they were not caused by these changes AFAICT. It was observed that installing a RH 7.1 runtime environment did make matters worse. Hangs and/or reboots have been observed with and without these changes, so when it failed to make life better in cases it doesn't look like it made it worse.
2001-09-08 19:07:04 +00:00
bsd_to_linux_sigaction(struct sigaction *bsa, l_sigaction_t *lsa)
Mega-commit for Linux emulator update.. This has been stress tested under netscape-2.0 for Linux running all the Java stuff. The scrollbars are now working, at least on my machine. (whew! :-) I'm uncomfortable with the size of this commit, but it's too inter-dependant to easily seperate out. The main changes: COMPAT_LINUX is *GONE*. Most of the code has been moved out of the i386 machine dependent section into the linux emulator itself. The int 0x80 syscall code was almost identical to the lcall 7,0 code and a minor tweak allows them to both be used with the same C code. All kernels can now just modload the lkm and it'll DTRT without having to rebuild the kernel first. Like IBCS2, you can statically compile it in with "options LINUX". A pile of new syscalls implemented, including getdents(), llseek(), readv(), writev(), msync(), personality(). The Linux-ELF libraries want to use some of these. linux_select() now obeys Linux semantics, ie: returns the time remaining of the timeout value rather than leaving it the original value. Quite a few bugs removed, including incorrect arguments being used in syscalls.. eg: mixups between passing the sigset as an int, vs passing it as a pointer and doing a copyin(), missing return values, unhandled cases, SIOC* ioctls, etc. The build for the code has changed. i386/conf/files now knows how to build linux_genassym and generate linux_assym.h on the fly. Supporting changes elsewhere in the kernel: The user-mode signal trampoline has moved from the U area to immediately below the top of the stack (below PS_STRINGS). This allows the different binary emulations to have their own signal trampoline code (which gets rid of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so that the emulator can provide the exact "struct sigcontext *" argument to the program's signal handlers. The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which have the same values as the re-used SA_DISABLE and SA_ONSTACK which are intended for sigaction only. This enables the support of a SA_RESETHAND flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal semantics where the signal handler is reset when it's triggered. makesyscalls.sh no longer appends the struct sysentvec on the end of the generated init_sysent.c code. It's a lot saner to have it in a seperate file rather than trying to update the structure inside the awk script. :-) At exec time, the dozen bytes or so of signal trampoline code are copied to the top of the user's stack, rather than obtaining the trampoline code the old way by getting a clone of the parent's user area. This allows Linux and native binaries to freely exec each other without getting trampolines mixed up.
1996-03-02 19:38:20 +00:00
{
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
bsd_to_linux_sigset(&bsa->sa_mask, &lsa->lsa_mask);
lsa->lsa_handler = bsa->sa_handler;
lsa->lsa_restorer = NULL; /* unsupported */
lsa->lsa_flags = 0;
if (bsa->sa_flags & SA_NOCLDSTOP)
lsa->lsa_flags |= LINUX_SA_NOCLDSTOP;
if (bsa->sa_flags & SA_NOCLDWAIT)
lsa->lsa_flags |= LINUX_SA_NOCLDWAIT;
if (bsa->sa_flags & SA_SIGINFO)
lsa->lsa_flags |= LINUX_SA_SIGINFO;
if (bsa->sa_flags & SA_ONSTACK)
lsa->lsa_flags |= LINUX_SA_ONSTACK;
if (bsa->sa_flags & SA_RESTART)
lsa->lsa_flags |= LINUX_SA_RESTART;
if (bsa->sa_flags & SA_RESETHAND)
lsa->lsa_flags |= LINUX_SA_ONESHOT;
if (bsa->sa_flags & SA_NODEFER)
lsa->lsa_flags |= LINUX_SA_NOMASK;
Mega-commit for Linux emulator update.. This has been stress tested under netscape-2.0 for Linux running all the Java stuff. The scrollbars are now working, at least on my machine. (whew! :-) I'm uncomfortable with the size of this commit, but it's too inter-dependant to easily seperate out. The main changes: COMPAT_LINUX is *GONE*. Most of the code has been moved out of the i386 machine dependent section into the linux emulator itself. The int 0x80 syscall code was almost identical to the lcall 7,0 code and a minor tweak allows them to both be used with the same C code. All kernels can now just modload the lkm and it'll DTRT without having to rebuild the kernel first. Like IBCS2, you can statically compile it in with "options LINUX". A pile of new syscalls implemented, including getdents(), llseek(), readv(), writev(), msync(), personality(). The Linux-ELF libraries want to use some of these. linux_select() now obeys Linux semantics, ie: returns the time remaining of the timeout value rather than leaving it the original value. Quite a few bugs removed, including incorrect arguments being used in syscalls.. eg: mixups between passing the sigset as an int, vs passing it as a pointer and doing a copyin(), missing return values, unhandled cases, SIOC* ioctls, etc. The build for the code has changed. i386/conf/files now knows how to build linux_genassym and generate linux_assym.h on the fly. Supporting changes elsewhere in the kernel: The user-mode signal trampoline has moved from the U area to immediately below the top of the stack (below PS_STRINGS). This allows the different binary emulations to have their own signal trampoline code (which gets rid of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so that the emulator can provide the exact "struct sigcontext *" argument to the program's signal handlers. The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which have the same values as the re-used SA_DISABLE and SA_ONSTACK which are intended for sigaction only. This enables the support of a SA_RESETHAND flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal semantics where the signal handler is reset when it's triggered. makesyscalls.sh no longer appends the struct sysentvec on the end of the generated init_sysent.c code. It's a lot saner to have it in a seperate file rather than trying to update the structure inside the awk script. :-) At exec time, the dozen bytes or so of signal trampoline code are copied to the top of the user's stack, rather than obtaining the trampoline code the old way by getting a clone of the parent's user area. This allows Linux and native binaries to freely exec each other without getting trampolines mixed up.
1996-03-02 19:38:20 +00:00
}
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
Update include directives. Make linux_to_bsd_sigset and linux_do_sigaction non-static. Move linux_sigaction. linux_sigsuspend, linux_rt_sigsuspend, linux_pause and linux_sigaltstack to MD code.
2000-08-22 01:49:54 +00:00
int
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
linux_do_sigaction(struct thread *td, int linux_sig, l_sigaction_t *linux_nsa,
Round of cleanups and enhancements. These include (in random order): o Introduce private types for use in linux syscalls for two reasons: 1. establish type independence for ease in porting and, 2. provide a visual queue as to which syscalls have proper prototypes to further cleanup the i386/alpha split. Linuxulator types are prefixed by 'l_'. void and char have not been "virtualized". o Provide dummy functions for all syscalls and remove dummy functions or implementations of truely obsolete syscalls. o Sanitize the shm*, sem* and msg* syscalls. o Make a first attempt to implement the linux_sysctl syscall. At this time it only returns one MIB (KERN_VERSION), but most importantly, it tells us when we need to add additional sysctls :-) o Bump the kenel version up to 2.4.2 (this is not the same as the KERN_VERSION MIB, BTW). o Implement new syscalls, of which most are specific to i386. Our syscall table is now up to date with Linux 2.4.2. Some highlights: - Implement the 32-bit uid_t and gid_t bases syscalls. - Implement a couple of 64-bit file size/offset bases syscalls. o Fix or improve numerous syscalls and prototypes. o Reduce style(9) violations while I'm here. Especially indentation inconsistencies within the same file are addressed. Re-indenting did not obfuscate actual changes to the extend that it could not be combined. NOTE: I spend some time testing these changes and found that if there were regressions, they were not caused by these changes AFAICT. It was observed that installing a RH 7.1 runtime environment did make matters worse. Hangs and/or reboots have been observed with and without these changes, so when it failed to make life better in cases it doesn't look like it made it worse.
2001-09-08 19:07:04 +00:00
l_sigaction_t *linux_osa)
Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. Both functions use the new sigset_t and sigaction_t which allows support for more than 32 signals. Only the lower 32 signals are supported for now. linux_rt_sigaction, linux_sigaction and linux_signal use linux_do_sigaction to do the actual work. That way unnecessary redundancy is avoided. The same has been done for linux_rt_sigprocmask and linux_sigprocmask. They call linux_do_sigprocmask to do the actual work.
1999-08-14 17:28:46 +00:00
{
Implement linux_sigaltstack.
1999-11-30 15:02:28 +00:00
struct sigaction *nsa, *osa;
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
struct sigaction_args sa_args;
int error;
caddr_t sg = stackgap_init();
if (linux_sig <= 0 || linux_sig > LINUX_NSIG)
return (EINVAL);
if (linux_osa != NULL)
osa = stackgap_alloc(&sg, sizeof(struct sigaction));
else
osa = NULL;
if (linux_nsa != NULL) {
nsa = stackgap_alloc(&sg, sizeof(struct sigaction));
Implement linux_sigaltstack.
1999-11-30 15:02:28 +00:00
linux_to_bsd_sigaction(linux_nsa, nsa);
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
}
else
nsa = NULL;
The MI/MD split wasn't perfect and the MI files need hacks for the AlphaLinux compat bits. This will be better cleaned up soon. Agreed to what ever was necessary by: marcel
2000-11-01 19:48:35 +00:00
#ifndef __alpha__
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
if (linux_sig <= LINUX_SIGTBLSZ)
sa_args.sig = linux_to_bsd_signal[_SIG_IDX(linux_sig)];
else
The MI/MD split wasn't perfect and the MI files need hacks for the AlphaLinux compat bits. This will be better cleaned up soon. Agreed to what ever was necessary by: marcel
2000-11-01 19:48:35 +00:00
#endif
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
sa_args.sig = linux_sig;
sa_args.act = nsa;
sa_args.oact = osa;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
error = sigaction(td, &sa_args);
Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. Both functions use the new sigset_t and sigaction_t which allows support for more than 32 signals. Only the lower 32 signals are supported for now. linux_rt_sigaction, linux_sigaction and linux_signal use linux_do_sigaction to do the actual work. That way unnecessary redundancy is avoided. The same has been done for linux_rt_sigprocmask and linux_sigprocmask. They call linux_do_sigprocmask to do the actual work.
1999-08-14 17:28:46 +00:00
if (error)
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
return (error);
Implement linux_sigaltstack.
1999-11-30 15:02:28 +00:00
if (linux_osa != NULL)
bsd_to_linux_sigaction(osa, linux_osa);
Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. Both functions use the new sigset_t and sigaction_t which allows support for more than 32 signals. Only the lower 32 signals are supported for now. linux_rt_sigaction, linux_sigaction and linux_signal use linux_do_sigaction to do the actual work. That way unnecessary redundancy is avoided. The same has been done for linux_rt_sigprocmask and linux_sigprocmask. They call linux_do_sigprocmask to do the actual work.
1999-08-14 17:28:46 +00:00
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
return (0);
Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. Both functions use the new sigset_t and sigaction_t which allows support for more than 32 signals. Only the lower 32 signals are supported for now. linux_rt_sigaction, linux_sigaction and linux_signal use linux_do_sigaction to do the actual work. That way unnecessary redundancy is avoided. The same has been done for linux_rt_sigprocmask and linux_sigprocmask. They call linux_do_sigprocmask to do the actual work.
1999-08-14 17:28:46 +00:00
}
The MI/MD split wasn't perfect and the MI files need hacks for the AlphaLinux compat bits. This will be better cleaned up soon. Agreed to what ever was necessary by: marcel
2000-11-01 19:48:35 +00:00
#ifndef __alpha__
Mega-commit for Linux emulator update.. This has been stress tested under netscape-2.0 for Linux running all the Java stuff. The scrollbars are now working, at least on my machine. (whew! :-) I'm uncomfortable with the size of this commit, but it's too inter-dependant to easily seperate out. The main changes: COMPAT_LINUX is *GONE*. Most of the code has been moved out of the i386 machine dependent section into the linux emulator itself. The int 0x80 syscall code was almost identical to the lcall 7,0 code and a minor tweak allows them to both be used with the same C code. All kernels can now just modload the lkm and it'll DTRT without having to rebuild the kernel first. Like IBCS2, you can statically compile it in with "options LINUX". A pile of new syscalls implemented, including getdents(), llseek(), readv(), writev(), msync(), personality(). The Linux-ELF libraries want to use some of these. linux_select() now obeys Linux semantics, ie: returns the time remaining of the timeout value rather than leaving it the original value. Quite a few bugs removed, including incorrect arguments being used in syscalls.. eg: mixups between passing the sigset as an int, vs passing it as a pointer and doing a copyin(), missing return values, unhandled cases, SIOC* ioctls, etc. The build for the code has changed. i386/conf/files now knows how to build linux_genassym and generate linux_assym.h on the fly. Supporting changes elsewhere in the kernel: The user-mode signal trampoline has moved from the U area to immediately below the top of the stack (below PS_STRINGS). This allows the different binary emulations to have their own signal trampoline code (which gets rid of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so that the emulator can provide the exact "struct sigcontext *" argument to the program's signal handlers. The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which have the same values as the re-used SA_DISABLE and SA_ONSTACK which are intended for sigaction only. This enables the support of a SA_RESETHAND flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal semantics where the signal handler is reset when it's triggered. makesyscalls.sh no longer appends the struct sysentvec on the end of the generated init_sysent.c code. It's a lot saner to have it in a seperate file rather than trying to update the structure inside the awk script. :-) At exec time, the dozen bytes or so of signal trampoline code are copied to the top of the user's stack, rather than obtaining the trampoline code the old way by getting a clone of the parent's user area. This allows Linux and native binaries to freely exec each other without getting trampolines mixed up.
1996-03-02 19:38:20 +00:00
int
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
linux_signal(struct thread *td, struct linux_signal_args *args)
Mega-commit for Linux emulator update.. This has been stress tested under netscape-2.0 for Linux running all the Java stuff. The scrollbars are now working, at least on my machine. (whew! :-) I'm uncomfortable with the size of this commit, but it's too inter-dependant to easily seperate out. The main changes: COMPAT_LINUX is *GONE*. Most of the code has been moved out of the i386 machine dependent section into the linux emulator itself. The int 0x80 syscall code was almost identical to the lcall 7,0 code and a minor tweak allows them to both be used with the same C code. All kernels can now just modload the lkm and it'll DTRT without having to rebuild the kernel first. Like IBCS2, you can statically compile it in with "options LINUX". A pile of new syscalls implemented, including getdents(), llseek(), readv(), writev(), msync(), personality(). The Linux-ELF libraries want to use some of these. linux_select() now obeys Linux semantics, ie: returns the time remaining of the timeout value rather than leaving it the original value. Quite a few bugs removed, including incorrect arguments being used in syscalls.. eg: mixups between passing the sigset as an int, vs passing it as a pointer and doing a copyin(), missing return values, unhandled cases, SIOC* ioctls, etc. The build for the code has changed. i386/conf/files now knows how to build linux_genassym and generate linux_assym.h on the fly. Supporting changes elsewhere in the kernel: The user-mode signal trampoline has moved from the U area to immediately below the top of the stack (below PS_STRINGS). This allows the different binary emulations to have their own signal trampoline code (which gets rid of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so that the emulator can provide the exact "struct sigcontext *" argument to the program's signal handlers. The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which have the same values as the re-used SA_DISABLE and SA_ONSTACK which are intended for sigaction only. This enables the support of a SA_RESETHAND flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal semantics where the signal handler is reset when it's triggered. makesyscalls.sh no longer appends the struct sysentvec on the end of the generated init_sysent.c code. It's a lot saner to have it in a seperate file rather than trying to update the structure inside the awk script. :-) At exec time, the dozen bytes or so of signal trampoline code are copied to the top of the user's stack, rather than obtaining the trampoline code the old way by getting a clone of the parent's user area. This allows Linux and native binaries to freely exec each other without getting trampolines mixed up.
1996-03-02 19:38:20 +00:00
{
Round of cleanups and enhancements. These include (in random order): o Introduce private types for use in linux syscalls for two reasons: 1. establish type independence for ease in porting and, 2. provide a visual queue as to which syscalls have proper prototypes to further cleanup the i386/alpha split. Linuxulator types are prefixed by 'l_'. void and char have not been "virtualized". o Provide dummy functions for all syscalls and remove dummy functions or implementations of truely obsolete syscalls. o Sanitize the shm*, sem* and msg* syscalls. o Make a first attempt to implement the linux_sysctl syscall. At this time it only returns one MIB (KERN_VERSION), but most importantly, it tells us when we need to add additional sysctls :-) o Bump the kenel version up to 2.4.2 (this is not the same as the KERN_VERSION MIB, BTW). o Implement new syscalls, of which most are specific to i386. Our syscall table is now up to date with Linux 2.4.2. Some highlights: - Implement the 32-bit uid_t and gid_t bases syscalls. - Implement a couple of 64-bit file size/offset bases syscalls. o Fix or improve numerous syscalls and prototypes. o Reduce style(9) violations while I'm here. Especially indentation inconsistencies within the same file are addressed. Re-indenting did not obfuscate actual changes to the extend that it could not be combined. NOTE: I spend some time testing these changes and found that if there were regressions, they were not caused by these changes AFAICT. It was observed that installing a RH 7.1 runtime environment did make matters worse. Hangs and/or reboots have been observed with and without these changes, so when it failed to make life better in cases it doesn't look like it made it worse.
2001-09-08 19:07:04 +00:00
l_sigaction_t nsa, osa;
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
int error;
Mega-commit for Linux emulator update.. This has been stress tested under netscape-2.0 for Linux running all the Java stuff. The scrollbars are now working, at least on my machine. (whew! :-) I'm uncomfortable with the size of this commit, but it's too inter-dependant to easily seperate out. The main changes: COMPAT_LINUX is *GONE*. Most of the code has been moved out of the i386 machine dependent section into the linux emulator itself. The int 0x80 syscall code was almost identical to the lcall 7,0 code and a minor tweak allows them to both be used with the same C code. All kernels can now just modload the lkm and it'll DTRT without having to rebuild the kernel first. Like IBCS2, you can statically compile it in with "options LINUX". A pile of new syscalls implemented, including getdents(), llseek(), readv(), writev(), msync(), personality(). The Linux-ELF libraries want to use some of these. linux_select() now obeys Linux semantics, ie: returns the time remaining of the timeout value rather than leaving it the original value. Quite a few bugs removed, including incorrect arguments being used in syscalls.. eg: mixups between passing the sigset as an int, vs passing it as a pointer and doing a copyin(), missing return values, unhandled cases, SIOC* ioctls, etc. The build for the code has changed. i386/conf/files now knows how to build linux_genassym and generate linux_assym.h on the fly. Supporting changes elsewhere in the kernel: The user-mode signal trampoline has moved from the U area to immediately below the top of the stack (below PS_STRINGS). This allows the different binary emulations to have their own signal trampoline code (which gets rid of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so that the emulator can provide the exact "struct sigcontext *" argument to the program's signal handlers. The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which have the same values as the re-used SA_DISABLE and SA_ONSTACK which are intended for sigaction only. This enables the support of a SA_RESETHAND flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal semantics where the signal handler is reset when it's triggered. makesyscalls.sh no longer appends the struct sysentvec on the end of the generated init_sysent.c code. It's a lot saner to have it in a seperate file rather than trying to update the structure inside the awk script. :-) At exec time, the dozen bytes or so of signal trampoline code are copied to the top of the user's stack, rather than obtaining the trampoline code the old way by getting a clone of the parent's user area. This allows Linux and native binaries to freely exec each other without getting trampolines mixed up.
1996-03-02 19:38:20 +00:00
#ifdef DEBUG
Allow debugging output to be controlled on a per-syscall granularity. Also clean up debugging output in a slightly more uniform fashion. The default behavior remains the same (all debugging output is turned on)
2001-02-16 16:40:43 +00:00
if (ldebug(signal))
printf(ARGS(signal, "%d, %p"),
args->sig, (void *)args->handler);
Mega-commit for Linux emulator update.. This has been stress tested under netscape-2.0 for Linux running all the Java stuff. The scrollbars are now working, at least on my machine. (whew! :-) I'm uncomfortable with the size of this commit, but it's too inter-dependant to easily seperate out. The main changes: COMPAT_LINUX is *GONE*. Most of the code has been moved out of the i386 machine dependent section into the linux emulator itself. The int 0x80 syscall code was almost identical to the lcall 7,0 code and a minor tweak allows them to both be used with the same C code. All kernels can now just modload the lkm and it'll DTRT without having to rebuild the kernel first. Like IBCS2, you can statically compile it in with "options LINUX". A pile of new syscalls implemented, including getdents(), llseek(), readv(), writev(), msync(), personality(). The Linux-ELF libraries want to use some of these. linux_select() now obeys Linux semantics, ie: returns the time remaining of the timeout value rather than leaving it the original value. Quite a few bugs removed, including incorrect arguments being used in syscalls.. eg: mixups between passing the sigset as an int, vs passing it as a pointer and doing a copyin(), missing return values, unhandled cases, SIOC* ioctls, etc. The build for the code has changed. i386/conf/files now knows how to build linux_genassym and generate linux_assym.h on the fly. Supporting changes elsewhere in the kernel: The user-mode signal trampoline has moved from the U area to immediately below the top of the stack (below PS_STRINGS). This allows the different binary emulations to have their own signal trampoline code (which gets rid of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so that the emulator can provide the exact "struct sigcontext *" argument to the program's signal handlers. The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which have the same values as the re-used SA_DISABLE and SA_ONSTACK which are intended for sigaction only. This enables the support of a SA_RESETHAND flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal semantics where the signal handler is reset when it's triggered. makesyscalls.sh no longer appends the struct sysentvec on the end of the generated init_sysent.c code. It's a lot saner to have it in a seperate file rather than trying to update the structure inside the awk script. :-) At exec time, the dozen bytes or so of signal trampoline code are copied to the top of the user's stack, rather than obtaining the trampoline code the old way by getting a clone of the parent's user area. This allows Linux and native binaries to freely exec each other without getting trampolines mixed up.
1996-03-02 19:38:20 +00:00
#endif
Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. Both functions use the new sigset_t and sigaction_t which allows support for more than 32 signals. Only the lower 32 signals are supported for now. linux_rt_sigaction, linux_sigaction and linux_signal use linux_do_sigaction to do the actual work. That way unnecessary redundancy is avoided. The same has been done for linux_rt_sigprocmask and linux_sigprocmask. They call linux_do_sigprocmask to do the actual work.
1999-08-14 17:28:46 +00:00
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
nsa.lsa_handler = args->handler;
nsa.lsa_flags = LINUX_SA_ONESHOT | LINUX_SA_NOMASK;
LINUX_SIGEMPTYSET(nsa.lsa_mask);
Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. Both functions use the new sigset_t and sigaction_t which allows support for more than 32 signals. Only the lower 32 signals are supported for now. linux_rt_sigaction, linux_sigaction and linux_signal use linux_do_sigaction to do the actual work. That way unnecessary redundancy is avoided. The same has been done for linux_rt_sigprocmask and linux_sigprocmask. They call linux_do_sigprocmask to do the actual work.
1999-08-14 17:28:46 +00:00
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
error = linux_do_sigaction(td, args->sig, &nsa, &osa);
td->td_retval[0] = (int)osa.lsa_handler;
Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. Both functions use the new sigset_t and sigaction_t which allows support for more than 32 signals. Only the lower 32 signals are supported for now. linux_rt_sigaction, linux_sigaction and linux_signal use linux_do_sigaction to do the actual work. That way unnecessary redundancy is avoided. The same has been done for linux_rt_sigprocmask and linux_sigprocmask. They call linux_do_sigprocmask to do the actual work.
1999-08-14 17:28:46 +00:00
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
return (error);
Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. Both functions use the new sigset_t and sigaction_t which allows support for more than 32 signals. Only the lower 32 signals are supported for now. linux_rt_sigaction, linux_sigaction and linux_signal use linux_do_sigaction to do the actual work. That way unnecessary redundancy is avoided. The same has been done for linux_rt_sigprocmask and linux_sigprocmask. They call linux_do_sigprocmask to do the actual work.
1999-08-14 17:28:46 +00:00
}
The MI/MD split wasn't perfect and the MI files need hacks for the AlphaLinux compat bits. This will be better cleaned up soon. Agreed to what ever was necessary by: marcel
2000-11-01 19:48:35 +00:00
#endif /*!__alpha__*/
Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. Both functions use the new sigset_t and sigaction_t which allows support for more than 32 signals. Only the lower 32 signals are supported for now. linux_rt_sigaction, linux_sigaction and linux_signal use linux_do_sigaction to do the actual work. That way unnecessary redundancy is avoided. The same has been done for linux_rt_sigprocmask and linux_sigprocmask. They call linux_do_sigprocmask to do the actual work.
1999-08-14 17:28:46 +00:00
int
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
linux_rt_sigaction(struct thread *td, struct linux_rt_sigaction_args *args)
Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. Both functions use the new sigset_t and sigaction_t which allows support for more than 32 signals. Only the lower 32 signals are supported for now. linux_rt_sigaction, linux_sigaction and linux_signal use linux_do_sigaction to do the actual work. That way unnecessary redundancy is avoided. The same has been done for linux_rt_sigprocmask and linux_sigprocmask. They call linux_do_sigprocmask to do the actual work.
1999-08-14 17:28:46 +00:00
{
Round of cleanups and enhancements. These include (in random order): o Introduce private types for use in linux syscalls for two reasons: 1. establish type independence for ease in porting and, 2. provide a visual queue as to which syscalls have proper prototypes to further cleanup the i386/alpha split. Linuxulator types are prefixed by 'l_'. void and char have not been "virtualized". o Provide dummy functions for all syscalls and remove dummy functions or implementations of truely obsolete syscalls. o Sanitize the shm*, sem* and msg* syscalls. o Make a first attempt to implement the linux_sysctl syscall. At this time it only returns one MIB (KERN_VERSION), but most importantly, it tells us when we need to add additional sysctls :-) o Bump the kenel version up to 2.4.2 (this is not the same as the KERN_VERSION MIB, BTW). o Implement new syscalls, of which most are specific to i386. Our syscall table is now up to date with Linux 2.4.2. Some highlights: - Implement the 32-bit uid_t and gid_t bases syscalls. - Implement a couple of 64-bit file size/offset bases syscalls. o Fix or improve numerous syscalls and prototypes. o Reduce style(9) violations while I'm here. Especially indentation inconsistencies within the same file are addressed. Re-indenting did not obfuscate actual changes to the extend that it could not be combined. NOTE: I spend some time testing these changes and found that if there were regressions, they were not caused by these changes AFAICT. It was observed that installing a RH 7.1 runtime environment did make matters worse. Hangs and/or reboots have been observed with and without these changes, so when it failed to make life better in cases it doesn't look like it made it worse.
2001-09-08 19:07:04 +00:00
l_sigaction_t nsa, osa;
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
int error;
Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. Both functions use the new sigset_t and sigaction_t which allows support for more than 32 signals. Only the lower 32 signals are supported for now. linux_rt_sigaction, linux_sigaction and linux_signal use linux_do_sigaction to do the actual work. That way unnecessary redundancy is avoided. The same has been done for linux_rt_sigprocmask and linux_sigprocmask. They call linux_do_sigprocmask to do the actual work.
1999-08-14 17:28:46 +00:00
#ifdef DEBUG
Allow debugging output to be controlled on a per-syscall granularity. Also clean up debugging output in a slightly more uniform fashion. The default behavior remains the same (all debugging output is turned on)
2001-02-16 16:40:43 +00:00
if (ldebug(rt_sigaction))
printf(ARGS(rt_sigaction, "%ld, %p, %p, %ld"),
(long)args->sig, (void *)args->act,
(void *)args->oact, (long)args->sigsetsize);
Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. Both functions use the new sigset_t and sigaction_t which allows support for more than 32 signals. Only the lower 32 signals are supported for now. linux_rt_sigaction, linux_sigaction and linux_signal use linux_do_sigaction to do the actual work. That way unnecessary redundancy is avoided. The same has been done for linux_rt_sigprocmask and linux_sigprocmask. They call linux_do_sigprocmask to do the actual work.
1999-08-14 17:28:46 +00:00
#endif
Round of cleanups and enhancements. These include (in random order): o Introduce private types for use in linux syscalls for two reasons: 1. establish type independence for ease in porting and, 2. provide a visual queue as to which syscalls have proper prototypes to further cleanup the i386/alpha split. Linuxulator types are prefixed by 'l_'. void and char have not been "virtualized". o Provide dummy functions for all syscalls and remove dummy functions or implementations of truely obsolete syscalls. o Sanitize the shm*, sem* and msg* syscalls. o Make a first attempt to implement the linux_sysctl syscall. At this time it only returns one MIB (KERN_VERSION), but most importantly, it tells us when we need to add additional sysctls :-) o Bump the kenel version up to 2.4.2 (this is not the same as the KERN_VERSION MIB, BTW). o Implement new syscalls, of which most are specific to i386. Our syscall table is now up to date with Linux 2.4.2. Some highlights: - Implement the 32-bit uid_t and gid_t bases syscalls. - Implement a couple of 64-bit file size/offset bases syscalls. o Fix or improve numerous syscalls and prototypes. o Reduce style(9) violations while I'm here. Especially indentation inconsistencies within the same file are addressed. Re-indenting did not obfuscate actual changes to the extend that it could not be combined. NOTE: I spend some time testing these changes and found that if there were regressions, they were not caused by these changes AFAICT. It was observed that installing a RH 7.1 runtime environment did make matters worse. Hangs and/or reboots have been observed with and without these changes, so when it failed to make life better in cases it doesn't look like it made it worse.
2001-09-08 19:07:04 +00:00
if (args->sigsetsize != sizeof(l_sigset_t))
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
return (EINVAL);
Mega-commit for Linux emulator update.. This has been stress tested under netscape-2.0 for Linux running all the Java stuff. The scrollbars are now working, at least on my machine. (whew! :-) I'm uncomfortable with the size of this commit, but it's too inter-dependant to easily seperate out. The main changes: COMPAT_LINUX is *GONE*. Most of the code has been moved out of the i386 machine dependent section into the linux emulator itself. The int 0x80 syscall code was almost identical to the lcall 7,0 code and a minor tweak allows them to both be used with the same C code. All kernels can now just modload the lkm and it'll DTRT without having to rebuild the kernel first. Like IBCS2, you can statically compile it in with "options LINUX". A pile of new syscalls implemented, including getdents(), llseek(), readv(), writev(), msync(), personality(). The Linux-ELF libraries want to use some of these. linux_select() now obeys Linux semantics, ie: returns the time remaining of the timeout value rather than leaving it the original value. Quite a few bugs removed, including incorrect arguments being used in syscalls.. eg: mixups between passing the sigset as an int, vs passing it as a pointer and doing a copyin(), missing return values, unhandled cases, SIOC* ioctls, etc. The build for the code has changed. i386/conf/files now knows how to build linux_genassym and generate linux_assym.h on the fly. Supporting changes elsewhere in the kernel: The user-mode signal trampoline has moved from the U area to immediately below the top of the stack (below PS_STRINGS). This allows the different binary emulations to have their own signal trampoline code (which gets rid of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so that the emulator can provide the exact "struct sigcontext *" argument to the program's signal handlers. The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which have the same values as the re-used SA_DISABLE and SA_ONSTACK which are intended for sigaction only. This enables the support of a SA_RESETHAND flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal semantics where the signal handler is reset when it's triggered. makesyscalls.sh no longer appends the struct sysentvec on the end of the generated init_sysent.c code. It's a lot saner to have it in a seperate file rather than trying to update the structure inside the awk script. :-) At exec time, the dozen bytes or so of signal trampoline code are copied to the top of the user's stack, rather than obtaining the trampoline code the old way by getting a clone of the parent's user area. This allows Linux and native binaries to freely exec each other without getting trampolines mixed up.
1996-03-02 19:38:20 +00:00
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
if (args->act != NULL) {
Round of cleanups and enhancements. These include (in random order): o Introduce private types for use in linux syscalls for two reasons: 1. establish type independence for ease in porting and, 2. provide a visual queue as to which syscalls have proper prototypes to further cleanup the i386/alpha split. Linuxulator types are prefixed by 'l_'. void and char have not been "virtualized". o Provide dummy functions for all syscalls and remove dummy functions or implementations of truely obsolete syscalls. o Sanitize the shm*, sem* and msg* syscalls. o Make a first attempt to implement the linux_sysctl syscall. At this time it only returns one MIB (KERN_VERSION), but most importantly, it tells us when we need to add additional sysctls :-) o Bump the kenel version up to 2.4.2 (this is not the same as the KERN_VERSION MIB, BTW). o Implement new syscalls, of which most are specific to i386. Our syscall table is now up to date with Linux 2.4.2. Some highlights: - Implement the 32-bit uid_t and gid_t bases syscalls. - Implement a couple of 64-bit file size/offset bases syscalls. o Fix or improve numerous syscalls and prototypes. o Reduce style(9) violations while I'm here. Especially indentation inconsistencies within the same file are addressed. Re-indenting did not obfuscate actual changes to the extend that it could not be combined. NOTE: I spend some time testing these changes and found that if there were regressions, they were not caused by these changes AFAICT. It was observed that installing a RH 7.1 runtime environment did make matters worse. Hangs and/or reboots have been observed with and without these changes, so when it failed to make life better in cases it doesn't look like it made it worse.
2001-09-08 19:07:04 +00:00
error = copyin(args->act, &nsa, sizeof(l_sigaction_t));
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
if (error)
return (error);
}
Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. Both functions use the new sigset_t and sigaction_t which allows support for more than 32 signals. Only the lower 32 signals are supported for now. linux_rt_sigaction, linux_sigaction and linux_signal use linux_do_sigaction to do the actual work. That way unnecessary redundancy is avoided. The same has been done for linux_rt_sigprocmask and linux_sigprocmask. They call linux_do_sigprocmask to do the actual work.
1999-08-14 17:28:46 +00:00
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
error = linux_do_sigaction(td, args->sig,
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
args->act ? &nsa : NULL,
args->oact ? &osa : NULL);
Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. Both functions use the new sigset_t and sigaction_t which allows support for more than 32 signals. Only the lower 32 signals are supported for now. linux_rt_sigaction, linux_sigaction and linux_signal use linux_do_sigaction to do the actual work. That way unnecessary redundancy is avoided. The same has been done for linux_rt_sigprocmask and linux_sigprocmask. They call linux_do_sigprocmask to do the actual work.
1999-08-14 17:28:46 +00:00
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
if (args->oact != NULL && !error) {
Round of cleanups and enhancements. These include (in random order): o Introduce private types for use in linux syscalls for two reasons: 1. establish type independence for ease in porting and, 2. provide a visual queue as to which syscalls have proper prototypes to further cleanup the i386/alpha split. Linuxulator types are prefixed by 'l_'. void and char have not been "virtualized". o Provide dummy functions for all syscalls and remove dummy functions or implementations of truely obsolete syscalls. o Sanitize the shm*, sem* and msg* syscalls. o Make a first attempt to implement the linux_sysctl syscall. At this time it only returns one MIB (KERN_VERSION), but most importantly, it tells us when we need to add additional sysctls :-) o Bump the kenel version up to 2.4.2 (this is not the same as the KERN_VERSION MIB, BTW). o Implement new syscalls, of which most are specific to i386. Our syscall table is now up to date with Linux 2.4.2. Some highlights: - Implement the 32-bit uid_t and gid_t bases syscalls. - Implement a couple of 64-bit file size/offset bases syscalls. o Fix or improve numerous syscalls and prototypes. o Reduce style(9) violations while I'm here. Especially indentation inconsistencies within the same file are addressed. Re-indenting did not obfuscate actual changes to the extend that it could not be combined. NOTE: I spend some time testing these changes and found that if there were regressions, they were not caused by these changes AFAICT. It was observed that installing a RH 7.1 runtime environment did make matters worse. Hangs and/or reboots have been observed with and without these changes, so when it failed to make life better in cases it doesn't look like it made it worse.
2001-09-08 19:07:04 +00:00
error = copyout(&osa, args->oact, sizeof(l_sigaction_t));
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
}
Mega-commit for Linux emulator update.. This has been stress tested under netscape-2.0 for Linux running all the Java stuff. The scrollbars are now working, at least on my machine. (whew! :-) I'm uncomfortable with the size of this commit, but it's too inter-dependant to easily seperate out. The main changes: COMPAT_LINUX is *GONE*. Most of the code has been moved out of the i386 machine dependent section into the linux emulator itself. The int 0x80 syscall code was almost identical to the lcall 7,0 code and a minor tweak allows them to both be used with the same C code. All kernels can now just modload the lkm and it'll DTRT without having to rebuild the kernel first. Like IBCS2, you can statically compile it in with "options LINUX". A pile of new syscalls implemented, including getdents(), llseek(), readv(), writev(), msync(), personality(). The Linux-ELF libraries want to use some of these. linux_select() now obeys Linux semantics, ie: returns the time remaining of the timeout value rather than leaving it the original value. Quite a few bugs removed, including incorrect arguments being used in syscalls.. eg: mixups between passing the sigset as an int, vs passing it as a pointer and doing a copyin(), missing return values, unhandled cases, SIOC* ioctls, etc. The build for the code has changed. i386/conf/files now knows how to build linux_genassym and generate linux_assym.h on the fly. Supporting changes elsewhere in the kernel: The user-mode signal trampoline has moved from the U area to immediately below the top of the stack (below PS_STRINGS). This allows the different binary emulations to have their own signal trampoline code (which gets rid of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so that the emulator can provide the exact "struct sigcontext *" argument to the program's signal handlers. The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which have the same values as the re-used SA_DISABLE and SA_ONSTACK which are intended for sigaction only. This enables the support of a SA_RESETHAND flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal semantics where the signal handler is reset when it's triggered. makesyscalls.sh no longer appends the struct sysentvec on the end of the generated init_sysent.c code. It's a lot saner to have it in a seperate file rather than trying to update the structure inside the awk script. :-) At exec time, the dozen bytes or so of signal trampoline code are copied to the top of the user's stack, rather than obtaining the trampoline code the old way by getting a clone of the parent's user area. This allows Linux and native binaries to freely exec each other without getting trampolines mixed up.
1996-03-02 19:38:20 +00:00
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
return (error);
Mega-commit for Linux emulator update.. This has been stress tested under netscape-2.0 for Linux running all the Java stuff. The scrollbars are now working, at least on my machine. (whew! :-) I'm uncomfortable with the size of this commit, but it's too inter-dependant to easily seperate out. The main changes: COMPAT_LINUX is *GONE*. Most of the code has been moved out of the i386 machine dependent section into the linux emulator itself. The int 0x80 syscall code was almost identical to the lcall 7,0 code and a minor tweak allows them to both be used with the same C code. All kernels can now just modload the lkm and it'll DTRT without having to rebuild the kernel first. Like IBCS2, you can statically compile it in with "options LINUX". A pile of new syscalls implemented, including getdents(), llseek(), readv(), writev(), msync(), personality(). The Linux-ELF libraries want to use some of these. linux_select() now obeys Linux semantics, ie: returns the time remaining of the timeout value rather than leaving it the original value. Quite a few bugs removed, including incorrect arguments being used in syscalls.. eg: mixups between passing the sigset as an int, vs passing it as a pointer and doing a copyin(), missing return values, unhandled cases, SIOC* ioctls, etc. The build for the code has changed. i386/conf/files now knows how to build linux_genassym and generate linux_assym.h on the fly. Supporting changes elsewhere in the kernel: The user-mode signal trampoline has moved from the U area to immediately below the top of the stack (below PS_STRINGS). This allows the different binary emulations to have their own signal trampoline code (which gets rid of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so that the emulator can provide the exact "struct sigcontext *" argument to the program's signal handlers. The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which have the same values as the re-used SA_DISABLE and SA_ONSTACK which are intended for sigaction only. This enables the support of a SA_RESETHAND flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal semantics where the signal handler is reset when it's triggered. makesyscalls.sh no longer appends the struct sysentvec on the end of the generated init_sysent.c code. It's a lot saner to have it in a seperate file rather than trying to update the structure inside the awk script. :-) At exec time, the dozen bytes or so of signal trampoline code are copied to the top of the user's stack, rather than obtaining the trampoline code the old way by getting a clone of the parent's user area. This allows Linux and native binaries to freely exec each other without getting trampolines mixed up.
1996-03-02 19:38:20 +00:00
}
Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. Both functions use the new sigset_t and sigaction_t which allows support for more than 32 signals. Only the lower 32 signals are supported for now. linux_rt_sigaction, linux_sigaction and linux_signal use linux_do_sigaction to do the actual work. That way unnecessary redundancy is avoided. The same has been done for linux_rt_sigprocmask and linux_sigprocmask. They call linux_do_sigprocmask to do the actual work.
1999-08-14 17:28:46 +00:00
static int
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
linux_do_sigprocmask(struct thread *td, int how, l_sigset_t *new,
Round of cleanups and enhancements. These include (in random order): o Introduce private types for use in linux syscalls for two reasons: 1. establish type independence for ease in porting and, 2. provide a visual queue as to which syscalls have proper prototypes to further cleanup the i386/alpha split. Linuxulator types are prefixed by 'l_'. void and char have not been "virtualized". o Provide dummy functions for all syscalls and remove dummy functions or implementations of truely obsolete syscalls. o Sanitize the shm*, sem* and msg* syscalls. o Make a first attempt to implement the linux_sysctl syscall. At this time it only returns one MIB (KERN_VERSION), but most importantly, it tells us when we need to add additional sysctls :-) o Bump the kenel version up to 2.4.2 (this is not the same as the KERN_VERSION MIB, BTW). o Implement new syscalls, of which most are specific to i386. Our syscall table is now up to date with Linux 2.4.2. Some highlights: - Implement the 32-bit uid_t and gid_t bases syscalls. - Implement a couple of 64-bit file size/offset bases syscalls. o Fix or improve numerous syscalls and prototypes. o Reduce style(9) violations while I'm here. Especially indentation inconsistencies within the same file are addressed. Re-indenting did not obfuscate actual changes to the extend that it could not be combined. NOTE: I spend some time testing these changes and found that if there were regressions, they were not caused by these changes AFAICT. It was observed that installing a RH 7.1 runtime environment did make matters worse. Hangs and/or reboots have been observed with and without these changes, so when it failed to make life better in cases it doesn't look like it made it worse.
2001-09-08 19:07:04 +00:00
l_sigset_t *old)
Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. Both functions use the new sigset_t and sigaction_t which allows support for more than 32 signals. Only the lower 32 signals are supported for now. linux_rt_sigaction, linux_sigaction and linux_signal use linux_do_sigaction to do the actual work. That way unnecessary redundancy is avoided. The same has been done for linux_rt_sigprocmask and linux_sigprocmask. They call linux_do_sigprocmask to do the actual work.
1999-08-14 17:28:46 +00:00
{
Lock access to proc members. Glanced over by: marcel
2000-12-15 19:41:27 +00:00
int error;
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
sigset_t mask;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct proc *p = td->td_proc;
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
error = 0;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
td->td_retval[0] = 0;
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
Lock access to proc members. Glanced over by: marcel
2000-12-15 19:41:27 +00:00
PROC_LOCK(p);
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
if (old != NULL)
bsd_to_linux_sigset(&p->p_sigmask, old);
if (new != NULL) {
linux_to_bsd_sigset(new, &mask);
switch (how) {
case LINUX_SIG_BLOCK:
SIGSETOR(p->p_sigmask, mask);
SIG_CANTMASK(p->p_sigmask);
break;
case LINUX_SIG_UNBLOCK:
SIGSETNAND(p->p_sigmask, mask);
Moved signal handling and rescheduling from userret() to ast() so that they aren't in the usual path of execution for syscalls and traps. The main complication for this is that we have to set flags to control ast() everywhere that changes the signal mask. Avoid locking in userret() in most of the remaining cases. Submitted by: luoqi (first part only, long ago, reorganized by me) Reminded by: dillon
2002-04-04 17:49:48 +00:00
signotify(p);
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
break;
case LINUX_SIG_SETMASK:
p->p_sigmask = mask;
SIG_CANTMASK(p->p_sigmask);
Moved signal handling and rescheduling from userret() to ast() so that they aren't in the usual path of execution for syscalls and traps. The main complication for this is that we have to set flags to control ast() everywhere that changes the signal mask. Avoid locking in userret() in most of the remaining cases. Submitted by: luoqi (first part only, long ago, reorganized by me) Reminded by: dillon
2002-04-04 17:49:48 +00:00
signotify(p);
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
break;
default:
error = EINVAL;
break;
}
Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. Both functions use the new sigset_t and sigaction_t which allows support for more than 32 signals. Only the lower 32 signals are supported for now. linux_rt_sigaction, linux_sigaction and linux_signal use linux_do_sigaction to do the actual work. That way unnecessary redundancy is avoided. The same has been done for linux_rt_sigprocmask and linux_sigprocmask. They call linux_do_sigprocmask to do the actual work.
1999-08-14 17:28:46 +00:00
}
Lock access to proc members. Glanced over by: marcel
2000-12-15 19:41:27 +00:00
PROC_UNLOCK(p);
Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. Both functions use the new sigset_t and sigaction_t which allows support for more than 32 signals. Only the lower 32 signals are supported for now. linux_rt_sigaction, linux_sigaction and linux_signal use linux_do_sigaction to do the actual work. That way unnecessary redundancy is avoided. The same has been done for linux_rt_sigprocmask and linux_sigprocmask. They call linux_do_sigprocmask to do the actual work.
1999-08-14 17:28:46 +00:00
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
return (error);
Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. Both functions use the new sigset_t and sigaction_t which allows support for more than 32 signals. Only the lower 32 signals are supported for now. linux_rt_sigaction, linux_sigaction and linux_signal use linux_do_sigaction to do the actual work. That way unnecessary redundancy is avoided. The same has been done for linux_rt_sigprocmask and linux_sigprocmask. They call linux_do_sigprocmask to do the actual work.
1999-08-14 17:28:46 +00:00
}
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
The MI/MD split wasn't perfect and the MI files need hacks for the AlphaLinux compat bits. This will be better cleaned up soon. Agreed to what ever was necessary by: marcel
2000-11-01 19:48:35 +00:00
#ifndef __alpha__
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
int
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
linux_sigprocmask(struct thread *td, struct linux_sigprocmask_args *args)
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
{
Round of cleanups and enhancements. These include (in random order): o Introduce private types for use in linux syscalls for two reasons: 1. establish type independence for ease in porting and, 2. provide a visual queue as to which syscalls have proper prototypes to further cleanup the i386/alpha split. Linuxulator types are prefixed by 'l_'. void and char have not been "virtualized". o Provide dummy functions for all syscalls and remove dummy functions or implementations of truely obsolete syscalls. o Sanitize the shm*, sem* and msg* syscalls. o Make a first attempt to implement the linux_sysctl syscall. At this time it only returns one MIB (KERN_VERSION), but most importantly, it tells us when we need to add additional sysctls :-) o Bump the kenel version up to 2.4.2 (this is not the same as the KERN_VERSION MIB, BTW). o Implement new syscalls, of which most are specific to i386. Our syscall table is now up to date with Linux 2.4.2. Some highlights: - Implement the 32-bit uid_t and gid_t bases syscalls. - Implement a couple of 64-bit file size/offset bases syscalls. o Fix or improve numerous syscalls and prototypes. o Reduce style(9) violations while I'm here. Especially indentation inconsistencies within the same file are addressed. Re-indenting did not obfuscate actual changes to the extend that it could not be combined. NOTE: I spend some time testing these changes and found that if there were regressions, they were not caused by these changes AFAICT. It was observed that installing a RH 7.1 runtime environment did make matters worse. Hangs and/or reboots have been observed with and without these changes, so when it failed to make life better in cases it doesn't look like it made it worse.
2001-09-08 19:07:04 +00:00
l_osigset_t mask;
l_sigset_t set, oset;
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
int error;
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
#ifdef DEBUG
Allow debugging output to be controlled on a per-syscall granularity. Also clean up debugging output in a slightly more uniform fashion. The default behavior remains the same (all debugging output is turned on)
2001-02-16 16:40:43 +00:00
if (ldebug(sigprocmask))
printf(ARGS(sigprocmask, "%d, *, *"), args->how);
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
#endif
Mega-commit for Linux emulator update.. This has been stress tested under netscape-2.0 for Linux running all the Java stuff. The scrollbars are now working, at least on my machine. (whew! :-) I'm uncomfortable with the size of this commit, but it's too inter-dependant to easily seperate out. The main changes: COMPAT_LINUX is *GONE*. Most of the code has been moved out of the i386 machine dependent section into the linux emulator itself. The int 0x80 syscall code was almost identical to the lcall 7,0 code and a minor tweak allows them to both be used with the same C code. All kernels can now just modload the lkm and it'll DTRT without having to rebuild the kernel first. Like IBCS2, you can statically compile it in with "options LINUX". A pile of new syscalls implemented, including getdents(), llseek(), readv(), writev(), msync(), personality(). The Linux-ELF libraries want to use some of these. linux_select() now obeys Linux semantics, ie: returns the time remaining of the timeout value rather than leaving it the original value. Quite a few bugs removed, including incorrect arguments being used in syscalls.. eg: mixups between passing the sigset as an int, vs passing it as a pointer and doing a copyin(), missing return values, unhandled cases, SIOC* ioctls, etc. The build for the code has changed. i386/conf/files now knows how to build linux_genassym and generate linux_assym.h on the fly. Supporting changes elsewhere in the kernel: The user-mode signal trampoline has moved from the U area to immediately below the top of the stack (below PS_STRINGS). This allows the different binary emulations to have their own signal trampoline code (which gets rid of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so that the emulator can provide the exact "struct sigcontext *" argument to the program's signal handlers. The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which have the same values as the re-used SA_DISABLE and SA_ONSTACK which are intended for sigaction only. This enables the support of a SA_RESETHAND flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal semantics where the signal handler is reset when it's triggered. makesyscalls.sh no longer appends the struct sysentvec on the end of the generated init_sysent.c code. It's a lot saner to have it in a seperate file rather than trying to update the structure inside the awk script. :-) At exec time, the dozen bytes or so of signal trampoline code are copied to the top of the user's stack, rather than obtaining the trampoline code the old way by getting a clone of the parent's user area. This allows Linux and native binaries to freely exec each other without getting trampolines mixed up.
1996-03-02 19:38:20 +00:00
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
if (args->mask != NULL) {
Round of cleanups and enhancements. These include (in random order): o Introduce private types for use in linux syscalls for two reasons: 1. establish type independence for ease in porting and, 2. provide a visual queue as to which syscalls have proper prototypes to further cleanup the i386/alpha split. Linuxulator types are prefixed by 'l_'. void and char have not been "virtualized". o Provide dummy functions for all syscalls and remove dummy functions or implementations of truely obsolete syscalls. o Sanitize the shm*, sem* and msg* syscalls. o Make a first attempt to implement the linux_sysctl syscall. At this time it only returns one MIB (KERN_VERSION), but most importantly, it tells us when we need to add additional sysctls :-) o Bump the kenel version up to 2.4.2 (this is not the same as the KERN_VERSION MIB, BTW). o Implement new syscalls, of which most are specific to i386. Our syscall table is now up to date with Linux 2.4.2. Some highlights: - Implement the 32-bit uid_t and gid_t bases syscalls. - Implement a couple of 64-bit file size/offset bases syscalls. o Fix or improve numerous syscalls and prototypes. o Reduce style(9) violations while I'm here. Especially indentation inconsistencies within the same file are addressed. Re-indenting did not obfuscate actual changes to the extend that it could not be combined. NOTE: I spend some time testing these changes and found that if there were regressions, they were not caused by these changes AFAICT. It was observed that installing a RH 7.1 runtime environment did make matters worse. Hangs and/or reboots have been observed with and without these changes, so when it failed to make life better in cases it doesn't look like it made it worse.
2001-09-08 19:07:04 +00:00
error = copyin(args->mask, &mask, sizeof(l_osigset_t));
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
if (error)
return (error);
LINUX_SIGEMPTYSET(set);
set.__bits[0] = mask;
}
Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. Both functions use the new sigset_t and sigaction_t which allows support for more than 32 signals. Only the lower 32 signals are supported for now. linux_rt_sigaction, linux_sigaction and linux_signal use linux_do_sigaction to do the actual work. That way unnecessary redundancy is avoided. The same has been done for linux_rt_sigprocmask and linux_sigprocmask. They call linux_do_sigprocmask to do the actual work.
1999-08-14 17:28:46 +00:00
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
error = linux_do_sigprocmask(td, args->how,
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
args->mask ? &set : NULL,
args->omask ? &oset : NULL);
Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. Both functions use the new sigset_t and sigaction_t which allows support for more than 32 signals. Only the lower 32 signals are supported for now. linux_rt_sigaction, linux_sigaction and linux_signal use linux_do_sigaction to do the actual work. That way unnecessary redundancy is avoided. The same has been done for linux_rt_sigprocmask and linux_sigprocmask. They call linux_do_sigprocmask to do the actual work.
1999-08-14 17:28:46 +00:00
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
if (args->omask != NULL && !error) {
mask = oset.__bits[0];
Round of cleanups and enhancements. These include (in random order): o Introduce private types for use in linux syscalls for two reasons: 1. establish type independence for ease in porting and, 2. provide a visual queue as to which syscalls have proper prototypes to further cleanup the i386/alpha split. Linuxulator types are prefixed by 'l_'. void and char have not been "virtualized". o Provide dummy functions for all syscalls and remove dummy functions or implementations of truely obsolete syscalls. o Sanitize the shm*, sem* and msg* syscalls. o Make a first attempt to implement the linux_sysctl syscall. At this time it only returns one MIB (KERN_VERSION), but most importantly, it tells us when we need to add additional sysctls :-) o Bump the kenel version up to 2.4.2 (this is not the same as the KERN_VERSION MIB, BTW). o Implement new syscalls, of which most are specific to i386. Our syscall table is now up to date with Linux 2.4.2. Some highlights: - Implement the 32-bit uid_t and gid_t bases syscalls. - Implement a couple of 64-bit file size/offset bases syscalls. o Fix or improve numerous syscalls and prototypes. o Reduce style(9) violations while I'm here. Especially indentation inconsistencies within the same file are addressed. Re-indenting did not obfuscate actual changes to the extend that it could not be combined. NOTE: I spend some time testing these changes and found that if there were regressions, they were not caused by these changes AFAICT. It was observed that installing a RH 7.1 runtime environment did make matters worse. Hangs and/or reboots have been observed with and without these changes, so when it failed to make life better in cases it doesn't look like it made it worse.
2001-09-08 19:07:04 +00:00
error = copyout(&mask, args->omask, sizeof(l_osigset_t));
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
}
Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. Both functions use the new sigset_t and sigaction_t which allows support for more than 32 signals. Only the lower 32 signals are supported for now. linux_rt_sigaction, linux_sigaction and linux_signal use linux_do_sigaction to do the actual work. That way unnecessary redundancy is avoided. The same has been done for linux_rt_sigprocmask and linux_sigprocmask. They call linux_do_sigprocmask to do the actual work.
1999-08-14 17:28:46 +00:00
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
return (error);
Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. Both functions use the new sigset_t and sigaction_t which allows support for more than 32 signals. Only the lower 32 signals are supported for now. linux_rt_sigaction, linux_sigaction and linux_signal use linux_do_sigaction to do the actual work. That way unnecessary redundancy is avoided. The same has been done for linux_rt_sigprocmask and linux_sigprocmask. They call linux_do_sigprocmask to do the actual work.
1999-08-14 17:28:46 +00:00
}
The MI/MD split wasn't perfect and the MI files need hacks for the AlphaLinux compat bits. This will be better cleaned up soon. Agreed to what ever was necessary by: marcel
2000-11-01 19:48:35 +00:00
#endif /*!__alpha__*/
Mega-commit for Linux emulator update.. This has been stress tested under netscape-2.0 for Linux running all the Java stuff. The scrollbars are now working, at least on my machine. (whew! :-) I'm uncomfortable with the size of this commit, but it's too inter-dependant to easily seperate out. The main changes: COMPAT_LINUX is *GONE*. Most of the code has been moved out of the i386 machine dependent section into the linux emulator itself. The int 0x80 syscall code was almost identical to the lcall 7,0 code and a minor tweak allows them to both be used with the same C code. All kernels can now just modload the lkm and it'll DTRT without having to rebuild the kernel first. Like IBCS2, you can statically compile it in with "options LINUX". A pile of new syscalls implemented, including getdents(), llseek(), readv(), writev(), msync(), personality(). The Linux-ELF libraries want to use some of these. linux_select() now obeys Linux semantics, ie: returns the time remaining of the timeout value rather than leaving it the original value. Quite a few bugs removed, including incorrect arguments being used in syscalls.. eg: mixups between passing the sigset as an int, vs passing it as a pointer and doing a copyin(), missing return values, unhandled cases, SIOC* ioctls, etc. The build for the code has changed. i386/conf/files now knows how to build linux_genassym and generate linux_assym.h on the fly. Supporting changes elsewhere in the kernel: The user-mode signal trampoline has moved from the U area to immediately below the top of the stack (below PS_STRINGS). This allows the different binary emulations to have their own signal trampoline code (which gets rid of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so that the emulator can provide the exact "struct sigcontext *" argument to the program's signal handlers. The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which have the same values as the re-used SA_DISABLE and SA_ONSTACK which are intended for sigaction only. This enables the support of a SA_RESETHAND flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal semantics where the signal handler is reset when it's triggered. makesyscalls.sh no longer appends the struct sysentvec on the end of the generated init_sysent.c code. It's a lot saner to have it in a seperate file rather than trying to update the structure inside the awk script. :-) At exec time, the dozen bytes or so of signal trampoline code are copied to the top of the user's stack, rather than obtaining the trampoline code the old way by getting a clone of the parent's user area. This allows Linux and native binaries to freely exec each other without getting trampolines mixed up.
1996-03-02 19:38:20 +00:00
Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. Both functions use the new sigset_t and sigaction_t which allows support for more than 32 signals. Only the lower 32 signals are supported for now. linux_rt_sigaction, linux_sigaction and linux_signal use linux_do_sigaction to do the actual work. That way unnecessary redundancy is avoided. The same has been done for linux_rt_sigprocmask and linux_sigprocmask. They call linux_do_sigprocmask to do the actual work.
1999-08-14 17:28:46 +00:00
int
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
linux_rt_sigprocmask(struct thread *td, struct linux_rt_sigprocmask_args *args)
Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. Both functions use the new sigset_t and sigaction_t which allows support for more than 32 signals. Only the lower 32 signals are supported for now. linux_rt_sigaction, linux_sigaction and linux_signal use linux_do_sigaction to do the actual work. That way unnecessary redundancy is avoided. The same has been done for linux_rt_sigprocmask and linux_sigprocmask. They call linux_do_sigprocmask to do the actual work.
1999-08-14 17:28:46 +00:00
{
Round of cleanups and enhancements. These include (in random order): o Introduce private types for use in linux syscalls for two reasons: 1. establish type independence for ease in porting and, 2. provide a visual queue as to which syscalls have proper prototypes to further cleanup the i386/alpha split. Linuxulator types are prefixed by 'l_'. void and char have not been "virtualized". o Provide dummy functions for all syscalls and remove dummy functions or implementations of truely obsolete syscalls. o Sanitize the shm*, sem* and msg* syscalls. o Make a first attempt to implement the linux_sysctl syscall. At this time it only returns one MIB (KERN_VERSION), but most importantly, it tells us when we need to add additional sysctls :-) o Bump the kenel version up to 2.4.2 (this is not the same as the KERN_VERSION MIB, BTW). o Implement new syscalls, of which most are specific to i386. Our syscall table is now up to date with Linux 2.4.2. Some highlights: - Implement the 32-bit uid_t and gid_t bases syscalls. - Implement a couple of 64-bit file size/offset bases syscalls. o Fix or improve numerous syscalls and prototypes. o Reduce style(9) violations while I'm here. Especially indentation inconsistencies within the same file are addressed. Re-indenting did not obfuscate actual changes to the extend that it could not be combined. NOTE: I spend some time testing these changes and found that if there were regressions, they were not caused by these changes AFAICT. It was observed that installing a RH 7.1 runtime environment did make matters worse. Hangs and/or reboots have been observed with and without these changes, so when it failed to make life better in cases it doesn't look like it made it worse.
2001-09-08 19:07:04 +00:00
l_sigset_t set, oset;
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
int error;
Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. Both functions use the new sigset_t and sigaction_t which allows support for more than 32 signals. Only the lower 32 signals are supported for now. linux_rt_sigaction, linux_sigaction and linux_signal use linux_do_sigaction to do the actual work. That way unnecessary redundancy is avoided. The same has been done for linux_rt_sigprocmask and linux_sigprocmask. They call linux_do_sigprocmask to do the actual work.
1999-08-14 17:28:46 +00:00
#ifdef DEBUG
Allow debugging output to be controlled on a per-syscall granularity. Also clean up debugging output in a slightly more uniform fashion. The default behavior remains the same (all debugging output is turned on)
2001-02-16 16:40:43 +00:00
if (ldebug(rt_sigprocmask))
printf(ARGS(rt_sigprocmask, "%d, %p, %p, %ld"),
args->how, (void *)args->mask,
(void *)args->omask, (long)args->sigsetsize);
Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. Both functions use the new sigset_t and sigaction_t which allows support for more than 32 signals. Only the lower 32 signals are supported for now. linux_rt_sigaction, linux_sigaction and linux_signal use linux_do_sigaction to do the actual work. That way unnecessary redundancy is avoided. The same has been done for linux_rt_sigprocmask and linux_sigprocmask. They call linux_do_sigprocmask to do the actual work.
1999-08-14 17:28:46 +00:00
#endif
Round of cleanups and enhancements. These include (in random order): o Introduce private types for use in linux syscalls for two reasons: 1. establish type independence for ease in porting and, 2. provide a visual queue as to which syscalls have proper prototypes to further cleanup the i386/alpha split. Linuxulator types are prefixed by 'l_'. void and char have not been "virtualized". o Provide dummy functions for all syscalls and remove dummy functions or implementations of truely obsolete syscalls. o Sanitize the shm*, sem* and msg* syscalls. o Make a first attempt to implement the linux_sysctl syscall. At this time it only returns one MIB (KERN_VERSION), but most importantly, it tells us when we need to add additional sysctls :-) o Bump the kenel version up to 2.4.2 (this is not the same as the KERN_VERSION MIB, BTW). o Implement new syscalls, of which most are specific to i386. Our syscall table is now up to date with Linux 2.4.2. Some highlights: - Implement the 32-bit uid_t and gid_t bases syscalls. - Implement a couple of 64-bit file size/offset bases syscalls. o Fix or improve numerous syscalls and prototypes. o Reduce style(9) violations while I'm here. Especially indentation inconsistencies within the same file are addressed. Re-indenting did not obfuscate actual changes to the extend that it could not be combined. NOTE: I spend some time testing these changes and found that if there were regressions, they were not caused by these changes AFAICT. It was observed that installing a RH 7.1 runtime environment did make matters worse. Hangs and/or reboots have been observed with and without these changes, so when it failed to make life better in cases it doesn't look like it made it worse.
2001-09-08 19:07:04 +00:00
if (args->sigsetsize != sizeof(l_sigset_t))
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
return EINVAL;
Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. Both functions use the new sigset_t and sigaction_t which allows support for more than 32 signals. Only the lower 32 signals are supported for now. linux_rt_sigaction, linux_sigaction and linux_signal use linux_do_sigaction to do the actual work. That way unnecessary redundancy is avoided. The same has been done for linux_rt_sigprocmask and linux_sigprocmask. They call linux_do_sigprocmask to do the actual work.
1999-08-14 17:28:46 +00:00
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
if (args->mask != NULL) {
Round of cleanups and enhancements. These include (in random order): o Introduce private types for use in linux syscalls for two reasons: 1. establish type independence for ease in porting and, 2. provide a visual queue as to which syscalls have proper prototypes to further cleanup the i386/alpha split. Linuxulator types are prefixed by 'l_'. void and char have not been "virtualized". o Provide dummy functions for all syscalls and remove dummy functions or implementations of truely obsolete syscalls. o Sanitize the shm*, sem* and msg* syscalls. o Make a first attempt to implement the linux_sysctl syscall. At this time it only returns one MIB (KERN_VERSION), but most importantly, it tells us when we need to add additional sysctls :-) o Bump the kenel version up to 2.4.2 (this is not the same as the KERN_VERSION MIB, BTW). o Implement new syscalls, of which most are specific to i386. Our syscall table is now up to date with Linux 2.4.2. Some highlights: - Implement the 32-bit uid_t and gid_t bases syscalls. - Implement a couple of 64-bit file size/offset bases syscalls. o Fix or improve numerous syscalls and prototypes. o Reduce style(9) violations while I'm here. Especially indentation inconsistencies within the same file are addressed. Re-indenting did not obfuscate actual changes to the extend that it could not be combined. NOTE: I spend some time testing these changes and found that if there were regressions, they were not caused by these changes AFAICT. It was observed that installing a RH 7.1 runtime environment did make matters worse. Hangs and/or reboots have been observed with and without these changes, so when it failed to make life better in cases it doesn't look like it made it worse.
2001-09-08 19:07:04 +00:00
error = copyin(args->mask, &set, sizeof(l_sigset_t));
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
if (error)
return (error);
}
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
error = linux_do_sigprocmask(td, args->how,
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
args->mask ? &set : NULL,
args->omask ? &oset : NULL);
Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. Both functions use the new sigset_t and sigaction_t which allows support for more than 32 signals. Only the lower 32 signals are supported for now. linux_rt_sigaction, linux_sigaction and linux_signal use linux_do_sigaction to do the actual work. That way unnecessary redundancy is avoided. The same has been done for linux_rt_sigprocmask and linux_sigprocmask. They call linux_do_sigprocmask to do the actual work.
1999-08-14 17:28:46 +00:00
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
if (args->omask != NULL && !error) {
Round of cleanups and enhancements. These include (in random order): o Introduce private types for use in linux syscalls for two reasons: 1. establish type independence for ease in porting and, 2. provide a visual queue as to which syscalls have proper prototypes to further cleanup the i386/alpha split. Linuxulator types are prefixed by 'l_'. void and char have not been "virtualized". o Provide dummy functions for all syscalls and remove dummy functions or implementations of truely obsolete syscalls. o Sanitize the shm*, sem* and msg* syscalls. o Make a first attempt to implement the linux_sysctl syscall. At this time it only returns one MIB (KERN_VERSION), but most importantly, it tells us when we need to add additional sysctls :-) o Bump the kenel version up to 2.4.2 (this is not the same as the KERN_VERSION MIB, BTW). o Implement new syscalls, of which most are specific to i386. Our syscall table is now up to date with Linux 2.4.2. Some highlights: - Implement the 32-bit uid_t and gid_t bases syscalls. - Implement a couple of 64-bit file size/offset bases syscalls. o Fix or improve numerous syscalls and prototypes. o Reduce style(9) violations while I'm here. Especially indentation inconsistencies within the same file are addressed. Re-indenting did not obfuscate actual changes to the extend that it could not be combined. NOTE: I spend some time testing these changes and found that if there were regressions, they were not caused by these changes AFAICT. It was observed that installing a RH 7.1 runtime environment did make matters worse. Hangs and/or reboots have been observed with and without these changes, so when it failed to make life better in cases it doesn't look like it made it worse.
2001-09-08 19:07:04 +00:00
error = copyout(&oset, args->omask, sizeof(l_sigset_t));
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
}
Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. Both functions use the new sigset_t and sigaction_t which allows support for more than 32 signals. Only the lower 32 signals are supported for now. linux_rt_sigaction, linux_sigaction and linux_signal use linux_do_sigaction to do the actual work. That way unnecessary redundancy is avoided. The same has been done for linux_rt_sigprocmask and linux_sigprocmask. They call linux_do_sigprocmask to do the actual work.
1999-08-14 17:28:46 +00:00
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
return (error);
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
}
The MI/MD split wasn't perfect and the MI files need hacks for the AlphaLinux compat bits. This will be better cleaned up soon. Agreed to what ever was necessary by: marcel
2000-11-01 19:48:35 +00:00
#ifndef __alpha__
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
int
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
linux_sgetmask(struct thread *td, struct linux_sgetmask_args *args)
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
{
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct proc *p = td->td_proc;
Round of cleanups and enhancements. These include (in random order): o Introduce private types for use in linux syscalls for two reasons: 1. establish type independence for ease in porting and, 2. provide a visual queue as to which syscalls have proper prototypes to further cleanup the i386/alpha split. Linuxulator types are prefixed by 'l_'. void and char have not been "virtualized". o Provide dummy functions for all syscalls and remove dummy functions or implementations of truely obsolete syscalls. o Sanitize the shm*, sem* and msg* syscalls. o Make a first attempt to implement the linux_sysctl syscall. At this time it only returns one MIB (KERN_VERSION), but most importantly, it tells us when we need to add additional sysctls :-) o Bump the kenel version up to 2.4.2 (this is not the same as the KERN_VERSION MIB, BTW). o Implement new syscalls, of which most are specific to i386. Our syscall table is now up to date with Linux 2.4.2. Some highlights: - Implement the 32-bit uid_t and gid_t bases syscalls. - Implement a couple of 64-bit file size/offset bases syscalls. o Fix or improve numerous syscalls and prototypes. o Reduce style(9) violations while I'm here. Especially indentation inconsistencies within the same file are addressed. Re-indenting did not obfuscate actual changes to the extend that it could not be combined. NOTE: I spend some time testing these changes and found that if there were regressions, they were not caused by these changes AFAICT. It was observed that installing a RH 7.1 runtime environment did make matters worse. Hangs and/or reboots have been observed with and without these changes, so when it failed to make life better in cases it doesn't look like it made it worse.
2001-09-08 19:07:04 +00:00
l_sigset_t mask;
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
#ifdef DEBUG
Round of cleanups and enhancements. These include (in random order): o Introduce private types for use in linux syscalls for two reasons: 1. establish type independence for ease in porting and, 2. provide a visual queue as to which syscalls have proper prototypes to further cleanup the i386/alpha split. Linuxulator types are prefixed by 'l_'. void and char have not been "virtualized". o Provide dummy functions for all syscalls and remove dummy functions or implementations of truely obsolete syscalls. o Sanitize the shm*, sem* and msg* syscalls. o Make a first attempt to implement the linux_sysctl syscall. At this time it only returns one MIB (KERN_VERSION), but most importantly, it tells us when we need to add additional sysctls :-) o Bump the kenel version up to 2.4.2 (this is not the same as the KERN_VERSION MIB, BTW). o Implement new syscalls, of which most are specific to i386. Our syscall table is now up to date with Linux 2.4.2. Some highlights: - Implement the 32-bit uid_t and gid_t bases syscalls. - Implement a couple of 64-bit file size/offset bases syscalls. o Fix or improve numerous syscalls and prototypes. o Reduce style(9) violations while I'm here. Especially indentation inconsistencies within the same file are addressed. Re-indenting did not obfuscate actual changes to the extend that it could not be combined. NOTE: I spend some time testing these changes and found that if there were regressions, they were not caused by these changes AFAICT. It was observed that installing a RH 7.1 runtime environment did make matters worse. Hangs and/or reboots have been observed with and without these changes, so when it failed to make life better in cases it doesn't look like it made it worse.
2001-09-08 19:07:04 +00:00
if (ldebug(sgetmask))
printf(ARGS(sgetmask, ""));
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
#endif
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
Lock access to proc members. Glanced over by: marcel
2000-12-15 19:41:27 +00:00
PROC_LOCK(p);
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
bsd_to_linux_sigset(&p->p_sigmask, &mask);
Lock access to proc members. Glanced over by: marcel
2000-12-15 19:41:27 +00:00
PROC_UNLOCK(p);
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
td->td_retval[0] = mask.__bits[0];
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
return (0);
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
}
int
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
linux_ssetmask(struct thread *td, struct linux_ssetmask_args *args)
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
{
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct proc *p = td->td_proc;
Round of cleanups and enhancements. These include (in random order): o Introduce private types for use in linux syscalls for two reasons: 1. establish type independence for ease in porting and, 2. provide a visual queue as to which syscalls have proper prototypes to further cleanup the i386/alpha split. Linuxulator types are prefixed by 'l_'. void and char have not been "virtualized". o Provide dummy functions for all syscalls and remove dummy functions or implementations of truely obsolete syscalls. o Sanitize the shm*, sem* and msg* syscalls. o Make a first attempt to implement the linux_sysctl syscall. At this time it only returns one MIB (KERN_VERSION), but most importantly, it tells us when we need to add additional sysctls :-) o Bump the kenel version up to 2.4.2 (this is not the same as the KERN_VERSION MIB, BTW). o Implement new syscalls, of which most are specific to i386. Our syscall table is now up to date with Linux 2.4.2. Some highlights: - Implement the 32-bit uid_t and gid_t bases syscalls. - Implement a couple of 64-bit file size/offset bases syscalls. o Fix or improve numerous syscalls and prototypes. o Reduce style(9) violations while I'm here. Especially indentation inconsistencies within the same file are addressed. Re-indenting did not obfuscate actual changes to the extend that it could not be combined. NOTE: I spend some time testing these changes and found that if there were regressions, they were not caused by these changes AFAICT. It was observed that installing a RH 7.1 runtime environment did make matters worse. Hangs and/or reboots have been observed with and without these changes, so when it failed to make life better in cases it doesn't look like it made it worse.
2001-09-08 19:07:04 +00:00
l_sigset_t lset;
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
sigset_t bset;
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
#ifdef DEBUG
Round of cleanups and enhancements. These include (in random order): o Introduce private types for use in linux syscalls for two reasons: 1. establish type independence for ease in porting and, 2. provide a visual queue as to which syscalls have proper prototypes to further cleanup the i386/alpha split. Linuxulator types are prefixed by 'l_'. void and char have not been "virtualized". o Provide dummy functions for all syscalls and remove dummy functions or implementations of truely obsolete syscalls. o Sanitize the shm*, sem* and msg* syscalls. o Make a first attempt to implement the linux_sysctl syscall. At this time it only returns one MIB (KERN_VERSION), but most importantly, it tells us when we need to add additional sysctls :-) o Bump the kenel version up to 2.4.2 (this is not the same as the KERN_VERSION MIB, BTW). o Implement new syscalls, of which most are specific to i386. Our syscall table is now up to date with Linux 2.4.2. Some highlights: - Implement the 32-bit uid_t and gid_t bases syscalls. - Implement a couple of 64-bit file size/offset bases syscalls. o Fix or improve numerous syscalls and prototypes. o Reduce style(9) violations while I'm here. Especially indentation inconsistencies within the same file are addressed. Re-indenting did not obfuscate actual changes to the extend that it could not be combined. NOTE: I spend some time testing these changes and found that if there were regressions, they were not caused by these changes AFAICT. It was observed that installing a RH 7.1 runtime environment did make matters worse. Hangs and/or reboots have been observed with and without these changes, so when it failed to make life better in cases it doesn't look like it made it worse.
2001-09-08 19:07:04 +00:00
if (ldebug(ssetmask))
printf(ARGS(ssetmask, "%08lx"), (unsigned long)args->mask);
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
#endif
Mega-commit for Linux emulator update.. This has been stress tested under netscape-2.0 for Linux running all the Java stuff. The scrollbars are now working, at least on my machine. (whew! :-) I'm uncomfortable with the size of this commit, but it's too inter-dependant to easily seperate out. The main changes: COMPAT_LINUX is *GONE*. Most of the code has been moved out of the i386 machine dependent section into the linux emulator itself. The int 0x80 syscall code was almost identical to the lcall 7,0 code and a minor tweak allows them to both be used with the same C code. All kernels can now just modload the lkm and it'll DTRT without having to rebuild the kernel first. Like IBCS2, you can statically compile it in with "options LINUX". A pile of new syscalls implemented, including getdents(), llseek(), readv(), writev(), msync(), personality(). The Linux-ELF libraries want to use some of these. linux_select() now obeys Linux semantics, ie: returns the time remaining of the timeout value rather than leaving it the original value. Quite a few bugs removed, including incorrect arguments being used in syscalls.. eg: mixups between passing the sigset as an int, vs passing it as a pointer and doing a copyin(), missing return values, unhandled cases, SIOC* ioctls, etc. The build for the code has changed. i386/conf/files now knows how to build linux_genassym and generate linux_assym.h on the fly. Supporting changes elsewhere in the kernel: The user-mode signal trampoline has moved from the U area to immediately below the top of the stack (below PS_STRINGS). This allows the different binary emulations to have their own signal trampoline code (which gets rid of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so that the emulator can provide the exact "struct sigcontext *" argument to the program's signal handlers. The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which have the same values as the re-used SA_DISABLE and SA_ONSTACK which are intended for sigaction only. This enables the support of a SA_RESETHAND flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal semantics where the signal handler is reset when it's triggered. makesyscalls.sh no longer appends the struct sysentvec on the end of the generated init_sysent.c code. It's a lot saner to have it in a seperate file rather than trying to update the structure inside the awk script. :-) At exec time, the dozen bytes or so of signal trampoline code are copied to the top of the user's stack, rather than obtaining the trampoline code the old way by getting a clone of the parent's user area. This allows Linux and native binaries to freely exec each other without getting trampolines mixed up.
1996-03-02 19:38:20 +00:00
Lock access to proc members. Glanced over by: marcel
2000-12-15 19:41:27 +00:00
PROC_LOCK(p);
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
bsd_to_linux_sigset(&p->p_sigmask, &lset);
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
td->td_retval[0] = lset.__bits[0];
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
LINUX_SIGEMPTYSET(lset);
lset.__bits[0] = args->mask;
linux_to_bsd_sigset(&lset, &bset);
p->p_sigmask = bset;
SIG_CANTMASK(p->p_sigmask);
Moved signal handling and rescheduling from userret() to ast() so that they aren't in the usual path of execution for syscalls and traps. The main complication for this is that we have to set flags to control ast() everywhere that changes the signal mask. Avoid locking in userret() in most of the remaining cases. Submitted by: luoqi (first part only, long ago, reorganized by me) Reminded by: dillon
2002-04-04 17:49:48 +00:00
signotify(p);
Lock access to proc members. Glanced over by: marcel
2000-12-15 19:41:27 +00:00
PROC_UNLOCK(p);
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
return (0);
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
}
int
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
linux_sigpending(struct thread *td, struct linux_sigpending_args *args)
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
{
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct proc *p = td->td_proc;
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
sigset_t bset;
Round of cleanups and enhancements. These include (in random order): o Introduce private types for use in linux syscalls for two reasons: 1. establish type independence for ease in porting and, 2. provide a visual queue as to which syscalls have proper prototypes to further cleanup the i386/alpha split. Linuxulator types are prefixed by 'l_'. void and char have not been "virtualized". o Provide dummy functions for all syscalls and remove dummy functions or implementations of truely obsolete syscalls. o Sanitize the shm*, sem* and msg* syscalls. o Make a first attempt to implement the linux_sysctl syscall. At this time it only returns one MIB (KERN_VERSION), but most importantly, it tells us when we need to add additional sysctls :-) o Bump the kenel version up to 2.4.2 (this is not the same as the KERN_VERSION MIB, BTW). o Implement new syscalls, of which most are specific to i386. Our syscall table is now up to date with Linux 2.4.2. Some highlights: - Implement the 32-bit uid_t and gid_t bases syscalls. - Implement a couple of 64-bit file size/offset bases syscalls. o Fix or improve numerous syscalls and prototypes. o Reduce style(9) violations while I'm here. Especially indentation inconsistencies within the same file are addressed. Re-indenting did not obfuscate actual changes to the extend that it could not be combined. NOTE: I spend some time testing these changes and found that if there were regressions, they were not caused by these changes AFAICT. It was observed that installing a RH 7.1 runtime environment did make matters worse. Hangs and/or reboots have been observed with and without these changes, so when it failed to make life better in cases it doesn't look like it made it worse.
2001-09-08 19:07:04 +00:00
l_sigset_t lset;
l_osigset_t mask;
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
#ifdef DEBUG
Allow debugging output to be controlled on a per-syscall granularity. Also clean up debugging output in a slightly more uniform fashion. The default behavior remains the same (all debugging output is turned on)
2001-02-16 16:40:43 +00:00
if (ldebug(sigpending))
printf(ARGS(sigpending, "*"));
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
#endif
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
Lock access to proc members. Glanced over by: marcel
2000-12-15 19:41:27 +00:00
PROC_LOCK(p);
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
bset = p->p_siglist;
SIGSETAND(bset, p->p_sigmask);
bsd_to_linux_sigset(&bset, &lset);
Lock access to proc members. Glanced over by: marcel
2000-12-15 19:41:27 +00:00
PROC_UNLOCK(p);
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
mask = lset.__bits[0];
return (copyout(&mask, args->mask, sizeof(mask)));
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
}
The MI/MD split wasn't perfect and the MI files need hacks for the AlphaLinux compat bits. This will be better cleaned up soon. Agreed to what ever was necessary by: marcel
2000-11-01 19:48:35 +00:00
#endif /*!__alpha__*/
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
int
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
linux_kill(struct thread *td, struct linux_kill_args *args)
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
{
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
struct kill_args /* {
int pid;
int signum;
} */ tmp;
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
#ifdef DEBUG
Allow debugging output to be controlled on a per-syscall granularity. Also clean up debugging output in a slightly more uniform fashion. The default behavior remains the same (all debugging output is turned on)
2001-02-16 16:40:43 +00:00
if (ldebug(kill))
printf(ARGS(kill, "%d, %d"), args->pid, args->signum);
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
#endif
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
/*
* Allow signal 0 as a means to check for privileges
*/
if (args->signum < 0 || args->signum > LINUX_NSIG)
return EINVAL;
The MI/MD split wasn't perfect and the MI files need hacks for the AlphaLinux compat bits. This will be better cleaned up soon. Agreed to what ever was necessary by: marcel
2000-11-01 19:48:35 +00:00
#ifndef __alpha__
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
if (args->signum > 0 && args->signum <= LINUX_SIGTBLSZ)
tmp.signum = linux_to_bsd_signal[_SIG_IDX(args->signum)];
else
The MI/MD split wasn't perfect and the MI files need hacks for the AlphaLinux compat bits. This will be better cleaned up soon. Agreed to what ever was necessary by: marcel
2000-11-01 19:48:35 +00:00
#endif
sigset_t change (part 4 of 5) ----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
1999-09-29 15:12:18 +00:00
tmp.signum = args->signum;
tmp.pid = args->pid;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
return (kill(td, &tmp));
First incarnation of our Linux emulator or rather compatibility code. This first shot only incorporaties so much functionality that DOOM can run (the X version), signal handling is VERY weak, so is many other things. But it meets my milestone number one (you guessed it - running DOOM). Uses /compat/linux as prefix for loading shared libs, so it won't conflict with our own libs. Kernel must be compiled with "options COMPAT_LINUX" for this to work.
1995-06-25 17:32:43 +00:00
}
Reference in New Issue Copy Permalink