freebsd-dev/sbin/fsck_ffs/pass1b.c

122 lines
3.5 KiB
C
Raw Normal View History

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (c) 1980, 1986, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#if 0
#ifndef lint
static const char sccsid[] = "@(#)pass1b.c 8.4 (Berkeley) 4/28/95";
#endif /* not lint */
#endif
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <ufs/ufs/dinode.h>
#include <ufs/ffs/fs.h>
#include <string.h>
#include "fsck.h"
static struct dups *duphead;
static int pass1bcheck(struct inodesc *);
void
pass1b(void)
{
int c, i;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
union dinode *dp;
struct inodesc idesc;
Rewrite the disk I/O management system in fsck_ffs(8). Other than making fsck_ffs(8) run faster, there should be no functional change. The original fsck_ffs(8) had its own disk I/O management system. When gjournal(8) was added to FreeBSD 7, code was added to fsck_ffs(8) to do the necessary gjournal rollback. Rather than use the existing fsck_ffs(8) disk I/O system, it wrote its own from scratch. Similarly when journalled soft updates were added in FreeBSD 9, code was added to fsck_ffs(8) to do the necessary journal rollback. And once again, rather than using either of the existing fsck_ffs(8) disk I/O systems, it wrote its own from scratch. Lastly the fsdb(8) utility uses the fsck_ffs(8) disk I/O management system. In preparation for making the changes necessary to enable snapshots to be taken when using journalled soft updates, it was necessary to have a single disk I/O system used by all the various subsystems in fsck_ffs(8). This commit merges the functionality required by all the different subsystems into a single disk I/O system that supports all of their needs. In so doing it picks up optimizations from each of them with the results that each of the subsystems does fewer reads and writes than it did with its own customized I/O system. It also greatly simplifies making changes to fsck_ffs(8) since everything goes through a single place. For example the ginode() function fetches an inode from the disk. When inode check hashes were added, they previously had to be checked in the code implementing inode fetch in each of the three different disk I/O systems. Now they need only be checked in ginode(). Tested by: Peter Holm Sponsored by: Netflix
2021-01-07 01:37:08 +00:00
ino_t inumber, inosused;
memset(&idesc, 0, sizeof(struct inodesc));
idesc.id_func = pass1bcheck;
duphead = duplist;
inumber = 0;
for (c = 0; c < sblock.fs_ncg; c++) {
if (got_siginfo) {
printf("%s: phase 1b: cyl group %d of %d (%d%%)\n",
cdevname, c, sblock.fs_ncg,
c * 100 / sblock.fs_ncg);
got_siginfo = 0;
}
if (got_sigalarm) {
setproctitle("%s p1b %d%%", cdevname,
c * 100 / sblock.fs_ncg);
got_sigalarm = 0;
}
Rewrite the disk I/O management system in fsck_ffs(8). Other than making fsck_ffs(8) run faster, there should be no functional change. The original fsck_ffs(8) had its own disk I/O management system. When gjournal(8) was added to FreeBSD 7, code was added to fsck_ffs(8) to do the necessary gjournal rollback. Rather than use the existing fsck_ffs(8) disk I/O system, it wrote its own from scratch. Similarly when journalled soft updates were added in FreeBSD 9, code was added to fsck_ffs(8) to do the necessary journal rollback. And once again, rather than using either of the existing fsck_ffs(8) disk I/O systems, it wrote its own from scratch. Lastly the fsdb(8) utility uses the fsck_ffs(8) disk I/O management system. In preparation for making the changes necessary to enable snapshots to be taken when using journalled soft updates, it was necessary to have a single disk I/O system used by all the various subsystems in fsck_ffs(8). This commit merges the functionality required by all the different subsystems into a single disk I/O system that supports all of their needs. In so doing it picks up optimizations from each of them with the results that each of the subsystems does fewer reads and writes than it did with its own customized I/O system. It also greatly simplifies making changes to fsck_ffs(8) since everything goes through a single place. For example the ginode() function fetches an inode from the disk. When inode check hashes were added, they previously had to be checked in the code implementing inode fetch in each of the three different disk I/O systems. Now they need only be checked in ginode(). Tested by: Peter Holm Sponsored by: Netflix
2021-01-07 01:37:08 +00:00
inosused = inostathead[c].il_numalloced;
if (inosused == 0)
continue;
setinodebuf(c, inosused);
for (i = 0; i < inosused; i++, inumber++) {
if (inumber < UFS_ROOTINO)
continue;
Rewrite the disk I/O management system in fsck_ffs(8). Other than making fsck_ffs(8) run faster, there should be no functional change. The original fsck_ffs(8) had its own disk I/O management system. When gjournal(8) was added to FreeBSD 7, code was added to fsck_ffs(8) to do the necessary gjournal rollback. Rather than use the existing fsck_ffs(8) disk I/O system, it wrote its own from scratch. Similarly when journalled soft updates were added in FreeBSD 9, code was added to fsck_ffs(8) to do the necessary journal rollback. And once again, rather than using either of the existing fsck_ffs(8) disk I/O systems, it wrote its own from scratch. Lastly the fsdb(8) utility uses the fsck_ffs(8) disk I/O management system. In preparation for making the changes necessary to enable snapshots to be taken when using journalled soft updates, it was necessary to have a single disk I/O system used by all the various subsystems in fsck_ffs(8). This commit merges the functionality required by all the different subsystems into a single disk I/O system that supports all of their needs. In so doing it picks up optimizations from each of them with the results that each of the subsystems does fewer reads and writes than it did with its own customized I/O system. It also greatly simplifies making changes to fsck_ffs(8) since everything goes through a single place. For example the ginode() function fetches an inode from the disk. When inode check hashes were added, they previously had to be checked in the code implementing inode fetch in each of the three different disk I/O systems. Now they need only be checked in ginode(). Tested by: Peter Holm Sponsored by: Netflix
2021-01-07 01:37:08 +00:00
dp = getnextinode(inumber, 0);
idesc.id_number = inumber;
Rewrite the disk I/O management system in fsck_ffs(8). Other than making fsck_ffs(8) run faster, there should be no functional change. The original fsck_ffs(8) had its own disk I/O management system. When gjournal(8) was added to FreeBSD 7, code was added to fsck_ffs(8) to do the necessary gjournal rollback. Rather than use the existing fsck_ffs(8) disk I/O system, it wrote its own from scratch. Similarly when journalled soft updates were added in FreeBSD 9, code was added to fsck_ffs(8) to do the necessary journal rollback. And once again, rather than using either of the existing fsck_ffs(8) disk I/O systems, it wrote its own from scratch. Lastly the fsdb(8) utility uses the fsck_ffs(8) disk I/O management system. In preparation for making the changes necessary to enable snapshots to be taken when using journalled soft updates, it was necessary to have a single disk I/O system used by all the various subsystems in fsck_ffs(8). This commit merges the functionality required by all the different subsystems into a single disk I/O system that supports all of their needs. In so doing it picks up optimizations from each of them with the results that each of the subsystems does fewer reads and writes than it did with its own customized I/O system. It also greatly simplifies making changes to fsck_ffs(8) since everything goes through a single place. For example the ginode() function fetches an inode from the disk. When inode check hashes were added, they previously had to be checked in the code implementing inode fetch in each of the three different disk I/O systems. Now they need only be checked in ginode(). Tested by: Peter Holm Sponsored by: Netflix
2021-01-07 01:37:08 +00:00
idesc.id_type = inoinfo(inumber)->ino_idtype;
if (inoinfo(inumber)->ino_state != USTATE &&
(ckinode(dp, &idesc) & STOP)) {
rerun = 1;
return;
}
}
}
}
static int
pass1bcheck(struct inodesc *idesc)
{
struct dups *dlp;
int nfrags, res = KEEPON;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t blkno = idesc->id_blkno;
for (nfrags = idesc->id_numfrags; nfrags > 0; blkno++, nfrags--) {
if (chkrange(blkno, 1))
res = SKIP;
for (dlp = duphead; dlp; dlp = dlp->next) {
if (dlp->dup == blkno) {
blkerror(idesc->id_number, "DUP", blkno);
dlp->dup = duphead->dup;
duphead->dup = blkno;
duphead = duphead->next;
}
if (dlp == muldup)
break;
}
if (muldup == NULL || duphead == muldup->next) {
rerun = 1;
return (STOP);
}
}
return (res);
}