freebsd-dev/usr.bin/tftp/main.c

1098 lines
24 KiB
C
Raw Normal View History

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
1994-05-27 12:33:43 +00:00
* Copyright (c) 1983, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
1994-05-27 12:33:43 +00:00
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef lint
static const char copyright[] =
1994-05-27 12:33:43 +00:00
"@(#) Copyright (c) 1983, 1993\n\
The Regents of the University of California. All rights reserved.\n";
#endif
1994-05-27 12:33:43 +00:00
#if 0
1994-05-27 12:33:43 +00:00
#ifndef lint
static char sccsid[] = "@(#)main.c 8.1 (Berkeley) 6/6/93";
#endif
#endif
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
1994-05-27 12:33:43 +00:00
/* Many bug fixes are from Jim Guyton <guyton@rand-unix> */
/*
* TFTP User Program -- Command Interface.
*/
#include <sys/param.h>
1994-05-27 12:33:43 +00:00
#include <sys/types.h>
#include <sys/socket.h>
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
#include <sys/sysctl.h>
1994-05-27 12:33:43 +00:00
#include <sys/file.h>
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
#include <sys/stat.h>
1994-05-27 12:33:43 +00:00
#include <netinet/in.h>
#include <arpa/inet.h>
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
#include <arpa/tftp.h>
1994-05-27 12:33:43 +00:00
#include <ctype.h>
#include <err.h>
#include <histedit.h>
1994-05-27 12:33:43 +00:00
#include <netdb.h>
#include <setjmp.h>
#include <signal.h>
#include <stdbool.h>
1994-05-27 12:33:43 +00:00
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
#include "tftp-utils.h"
#include "tftp-io.h"
#include "tftp-options.h"
#include "tftp.h"
1994-05-27 12:33:43 +00:00
#define MAXLINE (2 * MAXPATHLEN)
1994-05-27 12:33:43 +00:00
#define TIMEOUT 5 /* secs between rexmt's */
typedef struct sockaddr_storage peeraddr;
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
static int connected;
static char mode[32];
static jmp_buf toplevel;
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
volatile int txrx_error;
static int peer;
2003-10-12 00:27:55 +00:00
#define MAX_MARGV 20
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
static int margc;
static char *margv[MAX_MARGV];
int verbose;
static char *port = NULL;
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
static void get(int, char **);
static void help(int, char **);
static void intr(int);
static void modecmd(int, char **);
static void put(int, char **);
static void quit(int, char **);
static void setascii(int, char **);
static void setbinary(int, char **);
static void setpeer0(char *, const char *);
static void setpeer(int, char **);
static void settimeoutpacket(int, char **);
static void settimeoutnetwork(int, char **);
static void setdebug(int, char **);
static void setverbose(int, char **);
static void showstatus(int, char **);
static void setblocksize(int, char **);
static void setblocksize2(int, char **);
static void setoptions(int, char **);
static void setrollover(int, char **);
static void setpacketdrop(int, char **);
static void setwindowsize(int, char **);
2002-03-22 01:42:45 +00:00
static void command(bool, EditLine *, History *, HistEvent *) __dead2;
2002-03-22 01:42:45 +00:00
static const char *command_prompt(void);
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
static void urihandling(char *URI);
static void getusage(char *);
static void makeargv(char *line);
static void putusage(char *);
2002-03-22 01:42:45 +00:00
static void settftpmode(const char *);
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
static char *tail(char *);
static struct cmd *getcmd(char *);
1994-05-27 12:33:43 +00:00
#define HELPINDENT (sizeof("connect"))
struct cmd {
const char *name;
2002-03-22 01:42:45 +00:00
void (*handler)(int, char **);
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
const char *help;
1994-05-27 12:33:43 +00:00
};
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
static struct cmd cmdtab[] = {
{ "connect", setpeer, "connect to remote tftp" },
{ "mode", modecmd, "set file transfer mode" },
{ "put", put, "send file" },
{ "get", get, "receive file" },
{ "quit", quit, "exit tftp" },
{ "verbose", setverbose, "toggle verbose mode" },
{ "status", showstatus, "show current status" },
{ "binary", setbinary, "set mode to octet" },
{ "ascii", setascii, "set mode to netascii" },
{ "rexmt", settimeoutpacket,
"set per-packet retransmission timeout[-]" },
{ "timeout", settimeoutnetwork,
"set total retransmission timeout" },
{ "trace", setdebug, "enable 'debug packet'[-]" },
{ "debug", setdebug, "enable verbose output" },
{ "blocksize", setblocksize, "set blocksize[*]" },
{ "blocksize2", setblocksize2, "set blocksize as a power of 2[**]" },
{ "rollover", setrollover, "rollover after 64K packets[**]" },
{ "options", setoptions,
"enable or disable RFC2347 style options" },
{ "help", help, "print help information" },
{ "packetdrop", setpacketdrop, "artificial packetloss feature" },
{ "windowsize", setwindowsize, "set windowsize[*]" },
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
{ "?", help, "print help information" },
{ NULL, NULL, NULL }
};
static struct modes {
const char *m_name;
const char *m_mode;
} modes[] = {
{ "ascii", "netascii" },
{ "netascii", "netascii" },
{ "binary", "octet" },
{ "image", "octet" },
{ "octet", "octet" },
{ NULL, NULL }
1994-05-27 12:33:43 +00:00
};
int
main(int argc, char *argv[])
1994-05-27 12:33:43 +00:00
{
HistEvent he;
static EditLine *el;
static History *hist;
bool interactive;
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
acting_as_client = 1;
peer = -1;
strcpy(mode, "octet");
1994-05-27 12:33:43 +00:00
signal(SIGINT, intr);
interactive = isatty(STDIN_FILENO);
if (interactive) {
el = el_init("tftp", stdin, stdout, stderr);
hist = history_init();
history(hist, &he, H_SETSIZE, 100);
el_set(el, EL_HIST, history, hist);
el_set(el, EL_EDITOR, "emacs");
el_set(el, EL_PROMPT, command_prompt);
el_set(el, EL_SIGNAL, 1);
el_source(el, NULL);
}
1994-05-27 12:33:43 +00:00
if (argc > 1) {
if (setjmp(toplevel) != 0)
exit(txrx_error);
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
if (strncmp(argv[1], "tftp://", 7) == 0) {
urihandling(argv[1]);
exit(txrx_error);
}
1994-05-27 12:33:43 +00:00
setpeer(argc, argv);
}
if (setjmp(toplevel) != 0) {
if (interactive)
el_reset(el);
1994-05-27 12:33:43 +00:00
(void)putchar('\n');
}
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
init_options();
command(interactive, el, hist, &he);
1994-05-27 12:33:43 +00:00
}
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
/*
* RFC3617 handling of TFTP URIs:
*
* tftpURI = "tftp://" host "/" file [ mode ]
* mode = ";" "mode=" ( "netascii" / "octet" )
* file = *( unreserved / escaped )
* host = <as specified by RFC 2732>
* unreserved = <as specified in RFC 2396>
* escaped = <as specified in RFC 2396>
*
* We are cheating a little bit by allowing any mode as specified in the
* modes table defined earlier on in this file and mapping it on the real
* mode.
*/
static void
urihandling(char *URI)
{
char uri[ARG_MAX];
char *host = NULL;
char *path = NULL;
2010-09-24 10:40:17 +00:00
char *opts = NULL;
const char *tmode = "octet";
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
char *s;
char line[MAXLINE];
int i;
strlcpy(uri, URI, ARG_MAX);
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
host = uri + 7;
if ((s = strchr(host, '/')) == NULL) {
fprintf(stderr,
"Invalid URI: Couldn't find / after hostname\n");
exit(1);
}
*s = '\0';
path = s + 1;
if ((s = strchr(path, ';')) != NULL) {
*s = '\0';
2010-09-24 10:40:17 +00:00
opts = s + 1;
1994-05-27 12:33:43 +00:00
2010-09-24 10:40:17 +00:00
if (strncmp(opts, "mode=", 5) == 0) {
tmode = opts;
tmode += 5;
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
for (i = 0; modes[i].m_name != NULL; i++) {
2010-09-24 10:40:17 +00:00
if (strcmp(modes[i].m_name, tmode) == 0)
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
break;
}
if (modes[i].m_name == NULL) {
fprintf(stderr, "Invalid mode: '%s'\n", mode);
exit(1);
}
settftpmode(modes[i].m_mode);
}
} else {
settftpmode("octet");
}
setpeer0(host, NULL);
sprintf(line, "get %s", path);
makeargv(line);
get(margc, margv);
}
static char hostname[MAXHOSTNAMELEN];
static void
setpeer0(char *host, const char *lport)
{
struct addrinfo hints, *res0, *res;
int error;
const char *cause = "unknown";
if (connected) {
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
close(peer);
peer = -1;
}
connected = 0;
memset(&hints, 0, sizeof(hints));
hints.ai_family = PF_UNSPEC;
hints.ai_socktype = SOCK_DGRAM;
hints.ai_protocol = IPPROTO_UDP;
hints.ai_flags = AI_CANONNAME;
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
if (!lport)
lport = "tftp";
error = getaddrinfo(host, lport, &hints, &res0);
if (error) {
warnx("%s", gai_strerror(error));
return;
}
for (res = res0; res; res = res->ai_next) {
if (res->ai_addrlen > sizeof(peeraddr))
continue;
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
peer = socket(res->ai_family, res->ai_socktype,
res->ai_protocol);
if (peer < 0) {
cause = "socket";
continue;
}
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
memset(&peer_sock, 0, sizeof(peer_sock));
peer_sock.ss_family = res->ai_family;
peer_sock.ss_len = res->ai_addrlen;
if (bind(peer, (struct sockaddr *)&peer_sock, peer_sock.ss_len) < 0) {
cause = "bind";
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
close(peer);
peer = -1;
continue;
}
break;
}
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
if (peer < 0)
warn("%s", cause);
else {
/* res->ai_addr <= sizeof(peeraddr) is guaranteed */
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
memcpy(&peer_sock, res->ai_addr, res->ai_addrlen);
if (res->ai_canonname) {
(void) strlcpy(hostname, res->ai_canonname,
sizeof(hostname));
} else
(void) strlcpy(hostname, host, sizeof(hostname));
connected = 1;
}
freeaddrinfo(res0);
}
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
static void
setpeer(int argc, char *argv[])
1994-05-27 12:33:43 +00:00
{
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
char line[MAXLINE];
1994-05-27 12:33:43 +00:00
if (argc < 2) {
strcpy(line, "Connect ");
printf("(to) ");
fgets(&line[strlen(line)], sizeof line - strlen(line), stdin);
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
makeargv(line);
1994-05-27 12:33:43 +00:00
argc = margc;
argv = margv;
}
2002-01-04 13:46:57 +00:00
if ((argc < 2) || (argc > 3)) {
printf("usage: %s [host [port]]\n", argv[0]);
1994-05-27 12:33:43 +00:00
return;
}
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
if (argc == 3) {
port = argv[2];
setpeer0(argv[1], argv[2]);
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
} else
setpeer0(argv[1], NULL);
1994-05-27 12:33:43 +00:00
}
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
static void
modecmd(int argc, char *argv[])
1994-05-27 12:33:43 +00:00
{
struct modes *p;
const char *sep;
1994-05-27 12:33:43 +00:00
if (argc < 2) {
printf("Using %s mode to transfer files.\n", mode);
return;
}
if (argc == 2) {
for (p = modes; p->m_name; p++)
if (strcmp(argv[1], p->m_name) == 0)
break;
if (p->m_name) {
settftpmode(p->m_mode);
return;
}
printf("%s: unknown mode\n", argv[1]);
/* drop through and print usage message */
}
printf("usage: %s [", argv[0]);
sep = " ";
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
for (p = modes; p->m_name != NULL; p++) {
1994-05-27 12:33:43 +00:00
printf("%s%s", sep, p->m_name);
if (*sep == ' ')
sep = " | ";
}
printf(" ]\n");
return;
}
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
static void
setbinary(int argc __unused, char *argv[] __unused)
1995-05-30 06:41:30 +00:00
{
1994-05-27 12:33:43 +00:00
settftpmode("octet");
}
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
static void
setascii(int argc __unused, char *argv[] __unused)
1994-05-27 12:33:43 +00:00
{
settftpmode("netascii");
}
static void
settftpmode(const char *newmode)
1994-05-27 12:33:43 +00:00
{
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
strlcpy(mode, newmode, sizeof(mode));
1994-05-27 12:33:43 +00:00
if (verbose)
printf("mode set to %s\n", mode);
}
/*
* Send file(s).
*/
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
static void
put(int argc, char *argv[])
1994-05-27 12:33:43 +00:00
{
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
int fd;
int n;
char *cp, *targ;
char line[MAXLINE];
struct stat sb;
1994-05-27 12:33:43 +00:00
if (argc < 2) {
strcpy(line, "send ");
printf("(file) ");
fgets(&line[strlen(line)], sizeof line - strlen(line), stdin);
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
makeargv(line);
1994-05-27 12:33:43 +00:00
argc = margc;
argv = margv;
}
if (argc < 2) {
putusage(argv[0]);
return;
}
targ = argv[argc - 1];
if (strrchr(argv[argc - 1], ':')) {
char *lcp;
1994-05-27 12:33:43 +00:00
for (n = 1; n < argc - 1; n++)
if (strchr(argv[n], ':')) {
1994-05-27 12:33:43 +00:00
putusage(argv[0]);
return;
}
lcp = argv[argc - 1];
targ = strrchr(lcp, ':');
1994-05-27 12:33:43 +00:00
*targ++ = 0;
if (lcp[0] == '[' && lcp[strlen(lcp) - 1] == ']') {
lcp[strlen(lcp) - 1] = '\0';
lcp++;
1994-05-27 12:33:43 +00:00
}
setpeer0(lcp, NULL);
1994-05-27 12:33:43 +00:00
}
if (!connected) {
printf("No target machine specified.\n");
return;
}
if (argc < 4) {
cp = argc == 2 ? tail(targ) : argv[1];
fd = open(cp, O_RDONLY);
if (fd < 0) {
warn("%s", cp);
1994-05-27 12:33:43 +00:00
return;
}
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
if (fstat(fd, &sb) < 0) {
warn("%s", cp);
close(fd);
return;
}
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
asprintf(&options[OPT_TSIZE].o_request, "%ju", sb.st_size);
1994-05-27 12:33:43 +00:00
if (verbose)
printf("putting %s to %s:%s [%s]\n",
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
cp, hostname, targ, mode);
xmitfile(peer, port, fd, targ, mode);
close(fd);
1994-05-27 12:33:43 +00:00
return;
}
/* this assumes the target is a directory */
/* on a remote unix system. hmmmm. */
cp = strchr(targ, '\0');
1994-05-27 12:33:43 +00:00
*cp++ = '/';
for (n = 1; n < argc - 1; n++) {
strcpy(cp, tail(argv[n]));
fd = open(argv[n], O_RDONLY);
if (fd < 0) {
warn("%s", argv[n]);
1994-05-27 12:33:43 +00:00
continue;
}
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
if (fstat(fd, &sb) < 0) {
warn("%s", argv[n]);
continue;
}
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
asprintf(&options[OPT_TSIZE].o_request, "%ju", sb.st_size);
1994-05-27 12:33:43 +00:00
if (verbose)
printf("putting %s to %s:%s [%s]\n",
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
argv[n], hostname, targ, mode);
xmitfile(peer, port, fd, targ, mode);
1994-05-27 12:33:43 +00:00
}
}
static void
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
putusage(char *s)
1994-05-27 12:33:43 +00:00
{
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
printf("usage: %s file [remotename]\n", s);
printf(" %s file host:remotename\n", s);
printf(" %s file1 file2 ... fileN [[host:]remote-directory]\n", s);
1994-05-27 12:33:43 +00:00
}
/*
* Receive file(s).
*/
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
static void
get(int argc, char *argv[])
1994-05-27 12:33:43 +00:00
{
int fd;
int n;
char *cp;
1994-05-27 12:33:43 +00:00
char *src;
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
char line[MAXLINE];
1994-05-27 12:33:43 +00:00
if (argc < 2) {
strcpy(line, "get ");
printf("(files) ");
fgets(&line[strlen(line)], sizeof line - strlen(line), stdin);
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
makeargv(line);
1994-05-27 12:33:43 +00:00
argc = margc;
argv = margv;
}
if (argc < 2) {
getusage(argv[0]);
return;
}
if (!connected) {
for (n = 1; n < argc ; n++)
if (strrchr(argv[n], ':') == 0) {
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
printf("No remote host specified and "
"no host given for file '%s'\n", argv[n]);
1994-05-27 12:33:43 +00:00
getusage(argv[0]);
return;
}
}
for (n = 1; n < argc ; n++) {
src = strrchr(argv[n], ':');
1994-05-27 12:33:43 +00:00
if (src == NULL)
src = argv[n];
else {
char *lcp;
1994-05-27 12:33:43 +00:00
*src++ = 0;
lcp = argv[n];
if (lcp[0] == '[' && lcp[strlen(lcp) - 1] == ']') {
lcp[strlen(lcp) - 1] = '\0';
lcp++;
1994-05-27 12:33:43 +00:00
}
setpeer0(lcp, NULL);
if (!connected)
continue;
1994-05-27 12:33:43 +00:00
}
if (argc < 4) {
cp = argc == 3 ? argv[2] : tail(src);
fd = creat(cp, 0644);
if (fd < 0) {
warn("%s", cp);
1994-05-27 12:33:43 +00:00
return;
}
if (verbose)
printf("getting from %s:%s to %s [%s]\n",
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
hostname, src, cp, mode);
recvfile(peer, port, fd, src, mode);
1994-05-27 12:33:43 +00:00
break;
}
cp = tail(src); /* new .. jdg */
fd = creat(cp, 0644);
if (fd < 0) {
warn("%s", cp);
1994-05-27 12:33:43 +00:00
continue;
}
if (verbose)
printf("getting from %s:%s to %s [%s]\n",
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
hostname, src, cp, mode);
recvfile(peer, port, fd, src, mode);
1994-05-27 12:33:43 +00:00
}
}
static void
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
getusage(char *s)
1994-05-27 12:33:43 +00:00
{
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
printf("usage: %s file [localname]\n", s);
printf(" %s [host:]file [localname]\n", s);
printf(" %s [host1:]file1 [host2:]file2 ... [hostN:]fileN\n", s);
1994-05-27 12:33:43 +00:00
}
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
static void
settimeoutpacket(int argc, char *argv[])
1994-05-27 12:33:43 +00:00
{
int t;
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
char line[MAXLINE];
1994-05-27 12:33:43 +00:00
if (argc < 2) {
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
strcpy(line, "Packet timeout ");
1994-05-27 12:33:43 +00:00
printf("(value) ");
fgets(&line[strlen(line)], sizeof line - strlen(line), stdin);
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
makeargv(line);
1994-05-27 12:33:43 +00:00
argc = margc;
argv = margv;
}
if (argc != 2) {
printf("usage: %s value\n", argv[0]);
return;
}
t = atoi(argv[1]);
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
if (t < 0) {
1994-05-27 12:33:43 +00:00
printf("%s: bad value\n", argv[1]);
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
return;
}
1994-05-27 12:33:43 +00:00
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
settimeouts(t, timeoutnetwork, maxtimeouts);
}
1994-05-27 12:33:43 +00:00
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
static void
settimeoutnetwork(int argc, char *argv[])
1994-05-27 12:33:43 +00:00
{
int t;
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
char line[MAXLINE];
1994-05-27 12:33:43 +00:00
if (argc < 2) {
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
strcpy(line, "Network timeout ");
1994-05-27 12:33:43 +00:00
printf("(value) ");
fgets(&line[strlen(line)], sizeof line - strlen(line), stdin);
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
makeargv(line);
1994-05-27 12:33:43 +00:00
argc = margc;
argv = margv;
}
if (argc != 2) {
printf("usage: %s value\n", argv[0]);
return;
}
t = atoi(argv[1]);
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
if (t < 0) {
1994-05-27 12:33:43 +00:00
printf("%s: bad value\n", argv[1]);
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
return;
}
settimeouts(timeoutpacket, t, maxtimeouts);
1994-05-27 12:33:43 +00:00
}
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
static void
showstatus(int argc __unused, char *argv[] __unused)
1994-05-27 12:33:43 +00:00
{
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
printf("Remote host: %s\n",
connected ? hostname : "none specified yet");
printf("RFC2347 Options support: %s\n",
options_rfc_enabled ? "enabled" : "disabled");
printf("Non-RFC defined options support: %s\n",
options_extra_enabled ? "enabled" : "disabled");
printf("Mode: %s\n", mode);
printf("Verbose: %s\n", verbose ? "on" : "off");
printf("Debug: %s\n", debug_show(debug));
printf("Artificial packetloss: %d in 100 packets\n",
packetdroppercentage);
printf("Segment size: %d bytes\n", segsize);
printf("Network timeout: %d seconds\n", timeoutpacket);
printf("Maximum network timeout: %d seconds\n", timeoutnetwork);
printf("Maximum timeouts: %d \n", maxtimeouts);
1994-05-27 12:33:43 +00:00
}
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
static void
intr(int dummy __unused)
1994-05-27 12:33:43 +00:00
{
signal(SIGALRM, SIG_IGN);
alarm(0);
longjmp(toplevel, -1);
}
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
static char *
tail(char *filename)
1994-05-27 12:33:43 +00:00
{
char *s;
1995-05-30 06:41:30 +00:00
1994-05-27 12:33:43 +00:00
while (*filename) {
s = strrchr(filename, '/');
1994-05-27 12:33:43 +00:00
if (s == NULL)
break;
if (s[1])
return (s + 1);
*s = '\0';
}
return (filename);
}
2001-10-19 00:23:07 +00:00
static const char *
2010-09-24 10:40:17 +00:00
command_prompt(void)
{
2001-10-19 00:23:07 +00:00
return ("tftp> ");
}
1994-05-27 12:33:43 +00:00
/*
* Command parser.
*/
static void
command(bool interactive, EditLine *el, History *hist, HistEvent *hep)
1994-05-27 12:33:43 +00:00
{
struct cmd *c;
const char *bp;
char *cp;
int len, num;
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
char line[MAXLINE];
2001-10-19 00:23:07 +00:00
1994-05-27 12:33:43 +00:00
for (;;) {
if (interactive) {
if ((bp = el_gets(el, &num)) == NULL || num == 0)
exit(0);
len = MIN(MAXLINE, num);
memcpy(line, bp, len);
line[len - 1] = '\0';
history(hist, hep, H_ENTER, bp);
2001-10-19 00:23:07 +00:00
} else {
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
line[0] = 0;
if (fgets(line, sizeof line , stdin) == NULL) {
2001-10-19 00:23:07 +00:00
if (feof(stdin)) {
exit(txrx_error);
2001-10-19 00:23:07 +00:00
} else {
continue;
}
1994-05-27 12:33:43 +00:00
}
}
if ((cp = strchr(line, '\n')))
*cp = '\0';
1994-05-27 12:33:43 +00:00
if (line[0] == 0)
continue;
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
makeargv(line);
1994-05-27 12:33:43 +00:00
if (margc == 0)
continue;
c = getcmd(margv[0]);
if (c == (struct cmd *)-1) {
1994-05-27 12:33:43 +00:00
printf("?Ambiguous command\n");
continue;
}
if (c == NULL) {
1994-05-27 12:33:43 +00:00
printf("?Invalid command\n");
continue;
}
(*c->handler)(margc, margv);
}
}
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
static struct cmd *
getcmd(char *name)
1994-05-27 12:33:43 +00:00
{
const char *p, *q;
struct cmd *c, *found;
int nmatches, longest;
1994-05-27 12:33:43 +00:00
longest = 0;
nmatches = 0;
found = 0;
for (c = cmdtab; (p = c->name) != NULL; c++) {
for (q = name; *q == *p++; q++)
if (*q == 0) /* exact match? */
return (c);
if (!*q) { /* the name was a prefix */
if (q - name > longest) {
longest = q - name;
nmatches = 1;
found = c;
} else if (q - name == longest)
nmatches++;
}
}
if (nmatches > 1)
return ((struct cmd *)-1);
return (found);
}
/*
* Slice a string up into argc/argv.
*/
static void
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
makeargv(char *line)
1994-05-27 12:33:43 +00:00
{
char *cp;
char **argp = margv;
1994-05-27 12:33:43 +00:00
margc = 0;
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
if ((cp = strchr(line, '\n')) != NULL)
*cp = '\0';
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
for (cp = line; margc < MAX_MARGV - 1 && *cp != '\0';) {
1994-05-27 12:33:43 +00:00
while (isspace(*cp))
cp++;
if (*cp == '\0')
break;
*argp++ = cp;
margc += 1;
while (*cp != '\0' && !isspace(*cp))
cp++;
if (*cp == '\0')
break;
*cp++ = '\0';
}
*argp++ = 0;
}
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
static void
quit(int argc __unused, char *argv[] __unused)
1994-05-27 12:33:43 +00:00
{
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
exit(txrx_error);
1994-05-27 12:33:43 +00:00
}
/*
* Help command.
*/
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
static void
help(int argc, char *argv[])
1994-05-27 12:33:43 +00:00
{
struct cmd *c;
1994-05-27 12:33:43 +00:00
if (argc == 1) {
printf("Commands may be abbreviated. Commands are:\n\n");
for (c = cmdtab; c->name; c++)
printf("%-*s\t%s\n", (int)HELPINDENT, c->name, c->help);
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
printf("\n[-] : You shouldn't use these ones anymore.\n");
printf("[*] : RFC2347 options support required.\n");
printf("[**] : Non-standard RFC2347 option.\n");
1994-05-27 12:33:43 +00:00
return;
}
while (--argc > 0) {
char *arg;
1994-05-27 12:33:43 +00:00
arg = *++argv;
c = getcmd(arg);
if (c == (struct cmd *)-1)
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
printf("?Ambiguous help command: %s\n", arg);
1994-05-27 12:33:43 +00:00
else if (c == (struct cmd *)0)
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
printf("?Invalid help command: %s\n", arg);
1994-05-27 12:33:43 +00:00
else
printf("%s\n", c->help);
}
}
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
static void
setverbose(int argc __unused, char *argv[] __unused)
1994-05-27 12:33:43 +00:00
{
verbose = !verbose;
printf("Verbose mode %s.\n", verbose ? "on" : "off");
}
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
static void
setoptions(int argc, char *argv[])
{
if (argc == 2) {
if (strcasecmp(argv[1], "enable") == 0 ||
strcasecmp(argv[1], "on") == 0) {
options_extra_enabled = 1;
options_rfc_enabled = 1;
}
if (strcasecmp(argv[1], "disable") == 0 ||
strcasecmp(argv[1], "off") == 0) {
options_extra_enabled = 0;
options_rfc_enabled = 0;
}
if (strcasecmp(argv[1], "extra") == 0)
options_extra_enabled = !options_extra_enabled;
}
printf("Support for RFC2347 style options are now %s.\n",
options_rfc_enabled ? "enabled" : "disabled");
printf("Support for non-RFC defined options are now %s.\n",
options_extra_enabled ? "enabled" : "disabled");
printf("\nThe following options are available:\n"
"\toptions on : enable support for RFC2347 style options\n"
"\toptions off : disable support for RFC2347 style options\n"
"\toptions extra : toggle support for non-RFC defined options\n"
);
}
static void
setrollover(int argc, char *argv[])
{
if (argc == 2) {
if (strcasecmp(argv[1], "never") == 0 ||
strcasecmp(argv[1], "none") == 0) {
free(options[OPT_ROLLOVER].o_request);
options[OPT_ROLLOVER].o_request = NULL;
}
if (strcasecmp(argv[1], "1") == 0) {
free(options[OPT_ROLLOVER].o_request);
options[OPT_ROLLOVER].o_request = strdup("1");
}
if (strcasecmp(argv[1], "0") == 0) {
free(options[OPT_ROLLOVER].o_request);
options[OPT_ROLLOVER].o_request = strdup("0");
}
}
printf("Support for the rollover options is %s.\n",
options[OPT_ROLLOVER].o_request != NULL ? "enabled" : "disabled");
if (options[OPT_ROLLOVER].o_request != NULL)
printf("Block rollover will be to block %s.\n",
options[OPT_ROLLOVER].o_request);
printf("\nThe following rollover options are available:\n"
"\trollover 0 : rollover to block zero (default)\n"
"\trollover 1 : rollover to block one\n"
"\trollover never : do not support the rollover option\n"
"\trollover none : do not support the rollover option\n"
);
}
static void
setdebug(int argc, char *argv[])
{
int i;
if (argc != 1) {
i = 1;
while (i < argc)
debug ^= debug_find(argv[i++]);
}
printf("The following debugging is enabled: %s\n", debug_show(debug));
printf("\nThe following debugs are available:\n");
i = 0;
while (debugs[i].name != NULL) {
printf("\t%s\t%s\n", debugs[i].name, debugs[i].desc);
i++;
}
}
static void
setblocksize(int argc, char *argv[])
{
if (!options_rfc_enabled)
printf("RFC2347 style options are not enabled "
"(but proceeding anyway)\n");
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
if (argc != 1) {
int size = atoi(argv[1]);
size_t max;
2010-09-24 10:40:17 +00:00
u_long maxdgram;
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
2010-09-24 10:40:17 +00:00
max = sizeof(maxdgram);
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
if (sysctlbyname("net.inet.udp.maxdgram",
2010-09-24 10:40:17 +00:00
&maxdgram, &max, NULL, 0) < 0) {
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
perror("sysctl: net.inet.udp.maxdgram");
return;
}
if (size < BLKSIZE_MIN || size > BLKSIZE_MAX) {
printf("Blocksize should be between %d and %d bytes.\n",
BLKSIZE_MIN, BLKSIZE_MAX);
return;
2010-09-24 10:40:17 +00:00
} else if (size > (int)maxdgram - 4) {
printf("Blocksize can't be bigger than %ld bytes due "
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
"to the net.inet.udp.maxdgram sysctl limitation.\n",
2010-09-24 10:40:17 +00:00
maxdgram - 4);
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
asprintf(&options[OPT_BLKSIZE].o_request,
2010-09-24 10:40:17 +00:00
"%ld", maxdgram - 4);
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
} else {
asprintf(&options[OPT_BLKSIZE].o_request, "%d", size);
}
}
printf("Blocksize is now %s bytes.\n", options[OPT_BLKSIZE].o_request);
}
static void
setblocksize2(int argc, char *argv[])
{
if (!options_rfc_enabled || !options_extra_enabled)
printf(
"RFC2347 style or non-RFC defined options are not enabled "
"(but proceeding anyway)\n");
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
if (argc != 1) {
int size = atoi(argv[1]);
int i;
size_t max;
2010-09-24 10:40:17 +00:00
u_long maxdgram;
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
int sizes[] = {
8, 16, 32, 64, 128, 256, 512, 1024,
2048, 4096, 8192, 16384, 32768, 0
};
2010-09-24 10:40:17 +00:00
max = sizeof(maxdgram);
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
if (sysctlbyname("net.inet.udp.maxdgram",
2010-09-24 10:40:17 +00:00
&maxdgram, &max, NULL, 0) < 0) {
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
perror("sysctl: net.inet.udp.maxdgram");
return;
}
for (i = 0; sizes[i] != 0; i++) {
if (sizes[i] == size) break;
}
if (sizes[i] == 0) {
printf("Blocksize2 should be a power of two between "
"8 and 32768.\n");
return;
}
if (size < BLKSIZE_MIN || size > BLKSIZE_MAX) {
printf("Blocksize2 should be between "
"%d and %d bytes.\n", BLKSIZE_MIN, BLKSIZE_MAX);
return;
2010-09-24 10:40:17 +00:00
} else if (size > (int)maxdgram - 4) {
printf("Blocksize2 can't be bigger than %ld bytes due "
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
"to the net.inet.udp.maxdgram sysctl limitation.\n",
2010-09-24 10:40:17 +00:00
maxdgram - 4);
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
for (i = 0; sizes[i+1] != 0; i++) {
2010-09-24 10:40:17 +00:00
if ((int)maxdgram < sizes[i+1]) break;
Go ahead and merge the work edwin@ on tftpd into the tree. It is a lot better than what's in the tree now. Edwin tested it at a prior employer, but can't test it today. I've found that it works a lot better with the various uboot versions that I've used in my embedded work. Here's the pkg-descr from the port that describes the changes: It all started when we got some new routers, which told me the following when trying to upload configuration or download images from it: The TFTP server doesn't support the blocksize option. My curiousity was triggered, it took me some reading of RFCs and other documentation to find out what was possible and what could be done. Was plain TFTP very simple in its handshake, TFTP with options was kind of messy because of its backwards capability: The first packet returned could either be an acknowledgement of options, or the first data packet. Going through the source code of src/libexec/tftpd and going through the code of src/usr.bin/tftp showed that there was a lot of duplicate code, and the addition of options would only increase the amount of duplicate code. After all, both the client and the server can act as a sender and receiver. At the end, it ended up with a nearly complete rewrite of the tftp client and server. It has been tested against the following TFTP clients and servers: - Itself (yay!) - The standard FreeBSD tftp client and server - The Fedora Core 6 tftp client and server - Cisco router tftp client - Extreme Networks tftp client It supports the following RFCs: RFC1350 - THE TFTP PROTOCOL (REVISION 2) RFC2347 - TFTP Option Extension RFC2348 - TFTP Blocksize Option RFC2349 - TFTP Timeout Interval and Transfer Size Options RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP) It supports the following unofficial TFTP Options as described at http://www.compuphase.com/tftp.htm: blksize2 - Block size restricted to powers of 2, excluding protocol headers rollover - Block counter roll-over (roll back to zero or to one) From the tftp program point of view the following things are changed: - New commands: "blocksize", "blocksize2", "rollover" and "options" - Development features: "debug" and "packetdrop" If you try this tftp/tftpd implementation, please let me know if it works (or doesn't work) and against which implementaion so I can get a list of confirmed working systems. Author: Edwin Groothuis <edwin@FreeBSD.org>
2010-05-04 06:13:17 +00:00
}
asprintf(&options[OPT_BLKSIZE2].o_request,
"%d", sizes[i]);
} else {
asprintf(&options[OPT_BLKSIZE2].o_request, "%d", size);
}
}
printf("Blocksize2 is now %s bytes.\n",
options[OPT_BLKSIZE2].o_request);
}
static void
setpacketdrop(int argc, char *argv[])
{
if (argc != 1)
packetdroppercentage = atoi(argv[1]);
printf("Randomly %d in 100 packets will be dropped\n",
packetdroppercentage);
}
static void
setwindowsize(int argc, char *argv[])
{
if (!options_rfc_enabled)
printf("RFC2347 style options are not enabled "
"(but proceeding anyway)\n");
if (argc != 1) {
int size = atoi(argv[1]);
if (size < WINDOWSIZE_MIN || size > WINDOWSIZE_MAX) {
printf("Windowsize should be between %d and %d "
"blocks.\n", WINDOWSIZE_MIN, WINDOWSIZE_MAX);
return;
} else {
asprintf(&options[OPT_WINDOWSIZE].o_request, "%d",
size);
}
}
printf("Windowsize is now %s blocks.\n",
options[OPT_WINDOWSIZE].o_request);
}